diff options
75 files changed, 735 insertions, 7512 deletions
diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk deleted file mode 100644 index 35b2d7e..0000000 --- a/Mk/bsd.port.mk +++ /dev/null @@ -1,6795 +0,0 @@ -#-*- tab-width: 4; -*- -# ex:ts=4 -# -# $FreeBSD$ -# $NetBSD: $ -# -# bsd.port.mk - 940820 Jordan K. Hubbard. -# This file is in the public domain. -# -# Please view me with 4 column tabs! - -# This is the master file for the most common elements to all port -# Makefile in the ports system. For a more general overview of its -# use and importance, see the Porter's Handbook. - -# There are two different types of "maintainers" in the ports framework. -# The maintainer alias of the bsd.port.mk file is listed below in the -# FreeBSD_MAINTAINER entry. You should consult them if you have any -# questions/suggestions regarding this file. -# -# DO NOT COMMIT CHANGES TO THIS FILE BY YOURSELF, EVEN IF YOU DID NOT GET -# A RESPONSE FROM THE MAINTAINER(S) WITHIN A REASONABLE TIMEFRAME! ALL -# UNAUTHORISED CHANGES WILL BE UNCONDITIONALLY REVERTED! - -FreeBSD_MAINTAINER= portmgr@FreeBSD.org - -# For each port, the MAINTAINER variable is what you should consult for -# contact information on the person(s) to contact if you have questions/ -# suggestions about that specific port. By default (if no MAINTAINER -# is listed), a port is maintained by the subscribers of the ports@FreeBSD.org -# mailing list, and any correspondence should be directed there. -# -# MAINTAINER - The e-mail address of the contact person for this port. -# Default: ports@FreeBSD.org -# -# These are meta-variables that are automatically set to the system -# you are running on. These are provided in case you need to take -# different actions for different values. -# -# ARCH - The architecture of the target machine, such as would be -# returned by "uname -p". -# OPSYS - Portability clause. This is the operating system the -# makefile is being used on. Automatically set to -# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate. -# OSREL - The release version (numeric) of the operating system. -# OSVERSION - The value of __FreeBSD_version. -# -# This is the beginning of the list of all variables that need to be -# defined in a port, listed in order that they should be included -# to fit in with existing conventions. (Exception: MAINTAINER actually -# should appear after EXTRACT_ONLY and before MASTER_SITE_BACKUP). -# -# These variables are used to identify your port. -# -# PORTNAME - Name of software. Mandatory. -# PORTVERSION - Version of software. Mandatory when no DISTVERSION is given. -# PORTREVISION - Version of port. Optional. Commonly used to indicate -# that an update has happened that affects the port -# framework itself, but not the distributed software -# (e.g., local patches or Makefile changes). -# PORTEPOCH - Optional. In certain odd cases, the PORTREVISION logic -# can be fooled by ports that appear to go backwards -# numerically (e.g. if port-0.3 is newer than port-1998). -# In this case, incrementing PORTEPOCH forces the revision. -# Default: 0 (no effect). -# PKGNAME - Always defined as -# ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}. -# Do not define this in your Makefile. -# PKGNAMEPREFIX - Prefix to specify that port is language-specific, etc. -# Optional. -# PKGNAMESUFFIX - Suffix to specify compilation options or a version -# designator (in case there are different versions of -# one port as is the case for Tcl). -# Optional. -# PKGVERSION - Always defined as ${PORTVERSION}. -# Do not define this in your Makefile. -# UNIQUENAME - A name for your port that is globally unique. By default, -# this is set to ${LATEST_LINK} when LATEST_LINK is set, -# and to ${PKGNAMEPREFIX}${PORTNAME} otherwise. -# DISTVERSION - Vendor version of the distribution. -# Default: ${PORTVERSION} -# DISTNAME - Name of port or distribution used in generating -# WRKSRC and DISTFILES below. -# Default: -# ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION}${DISTVERSIONSUFFIX} -# CATEGORIES - A list of descriptive categories into which this port falls. -# Mandatory. -# -# These variable describe how to fetch files required for building the port. -# -# DISTFILES - Name(s) of archive file(s) containing distribution. -# Set this to an empty string if the port doesn't require it. -# Default: ${DISTNAME}${EXTRACT_SUFX} -# EXTRACT_SUFX - Suffix for archive names -# You never have to set both DISTFILES and EXTRACT_SUFX. -# Default: .tar.bz2 if USE_BZIP2 is set, .lzh if USE_LHA is set, -# .zip if USE_ZIP is set, .tar.xz if USE_XZ is set, .run if -# USE_MAKESELF is set, .tar.gz otherwise). -# MASTER_SITES - Primary location(s) for distribution files if not found -# locally. See bsd.sites.mk for common choices for -# MASTER_SITES. -# MASTER_SITE_SUBDIR -# - Subdirectory of MASTER_SITES. Will sometimes need to be -# set to ${PORTNAME} for (e.g.) MASTER_SITE_SOURCEFORGE. -# Only guaranteed to work for choices of ${MASTER_SITES} -# defined in bsd.sites.mk. -# Default: not set. -# PATCHFILES - Name(s) of additional files that contain distribution -# patches. Make will look for them at PATCH_SITES (see below). -# They will automatically be uncompressed before patching if -# the names end with ".gz", ".bz2" or ".Z". -# For each file you can optionally specify a strip -# flag of patch(1) after a colon if it has a different -# base directory, e.g. "file1 file2:-p1 file3". -# You can also use a :group at the end for matching up to -# dist file groups. See Porters Handbook for more information. -# Syntax: PATCHFILES= patch[:-pX][:group] -# Default: not set. -# PATCH_SITES - Primary location(s) for distribution patch files -# if not found locally. -# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES} and -# ${PATCHFILES} will be put in this subdirectory of -# ${DISTDIR} (see below). Also they will be fetched in this -# subdirectory from FreeBSD mirror sites. -# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}. -# IGNOREFILES - If set, don't perform checksum checks on these files. -# NOFETCHFILES - If set, don't download these files from the ${MASTER_SITES} -# or ${MASTER_SITE_BACKUP} (but do from -# ${MASTER_SITE_OVERRIDE}) -# EXTRACT_ONLY - If set, a subset of ${DISTFILES} you want to -# actually extract. -# ALWAYS_KEEP_DISTFILES -# - If set, the package building cluster will save the distfiles -# along with the packages. This may be required to comply with -# some licenses, e.g. GPL in some cases. -# Default: not set. -# -# (NOTE: by convention, the MAINTAINER entry (see above) should go here.) -# -# These variables are typically set in /etc/make.conf to indicate -# the user's preferred location to fetch files from. You should -# rarely need to set these. -# -# MASTER_SITE_BACKUP -# - Backup location(s) for distribution files and patch -# files if not found locally and ${MASTER_SITES}/${PATCH_SITES} -# Default: -# ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ -# MASTER_SITE_OVERRIDE -# - If set, override the MASTER_SITES setting with this -# value. -# MASTER_SITE_FREEBSD -# - If set, only use ${MASTER_SITE_BACKUP} for -# MASTER_SITES. -# CD_MOUNTPTS - List of CDROM mountpoints to look for distfiles under. -# This variable supercedes CD_MOUNTPT, which is -# obsolete. -# -# Set these if your port should not be built under certain circumstances. -# These are string variables; you should set them to the reason why -# they are necessary. -# -# RESTRICTED - Prevent the distribution of distfiles and packages to -# the FTP sites or on CDROM (e.g. forbidden by license -# considerations). -# NO_CDROM - Packages and distfiles may not go on CDROM (e.g. must -# not be re-sold) but can go on FTP sites. -# NO_PACKAGE - Port should not be packaged for ftp sites or CDROMs, -# but distfiles can be put on ftp sites and CDROMs. -# FORBIDDEN - Package build should not be attempted because of -# security vulnerabilities. -# IGNORE - Package build should be skipped entirely (e.g. -# because of serious unfixable problems in the build, -# because it cannot be manually fetched, etc). Error -# logs will not appear on pointyhat, so this should be -# used sparingly. -# BROKEN - Port is believed to be broken. Package builds can -# still be attempted using TRYBROKEN to test this -# assumption. -# BROKEN_${ARCH} Port is believed to be broken on ${ARCH}. Package builds -# can still be attempted using TRYBROKEN to test this -# assumption. -# DEPRECATED - Port is deprecated to install. Advisory only. -# EXPIRATION_DATE -# - If DEPRECATED is set, determines a date when -# the port is planed to remove. The date format is -# ISO 8601 (YYYY-MM-DD). -# -# DISABLE_VULNERABILITIES -# - If set, do not check if the port is listed in the -# vulnerabilities database. -# -# In addition to RESTRICTED or NO_CDROM, if only a subset of distfiles -# or patchfiles have redistribution restrictions, set the following -# to the list of such files. -# -# RESTRICTED_FILES -# - List of files that cannot be redistributed. -# Default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED -# or NO_CDROM is set, empty otherwise. -# -# These variables are booleans, so you don't need to set them to the reason. -# -# IS_INTERACTIVE -# - Set this if your port needs to interact with the user -# during any step in a package build. User can then decide -# to skip this port by setting ${BATCH}, or compiling only -# the interactive ports by setting ${INTERACTIVE}. -# Default: not set. -# USE_SUBMAKE - Set this if you want that each of the port's main 7 targets -# (extract, patch, configure, build, stage, install and -# package) to be executed in a separate make(1) process. -# Useful when one of the stages needs to influence make(1) -# variables of the later stages using ${WRKDIR}/Makefile.inc -# generated on the fly. -# Default: not set. -# -# NO_ARCH - Set this if port is architecture neutral. -# -# Set these if your port only makes sense to certain architectures. -# They are lists containing names for them (e.g., "amd64 i386"). -# (Defaults: not set.) -# -# ONLY_FOR_ARCHS -# - Only build ports if ${ARCH} matches one of these. -# NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these. -# ONLY_FOR_ARCHS_REASON -# ONLY_FOR_ARCHS_REASON_${ARCH} -# - Reason why it's only for ${ONLY_FOR_ARCHS}s -# NOT_FOR_ARCHS_REASON -# NOT_FOR_ARCHS_REASON_${ARCH} -# - Reason why it's not for ${NOT_FOR_ARCHS}s -# IA32_BINARY_PORT -# - Set this instead of ONLY_FOR_ARCHS if the given port -# fetches and installs compiled i386 binaries. -# -# Dependency checking. Use these if your port requires another port -# not in the list below. (Default: empty.) -# -# EXTRACT_DEPENDS -# - A list of "path:dir[:target]" tuples of other ports this -# package depends on in the "extract" stage. "path" is -# the name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the existence -# (if it is a full pathname) or search for it in your -# $PATH (if it is an executable) and go into "dir" to do -# a "make all install" if it's not found. If the third -# field ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. The first field also supports a -# package name with a version range, in the form package>=1.2 -# if a particular version is desired. -# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends on in the "patch" stage. "path" is the -# name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the existence -# (if it is a full pathname) or search for it in your -# $PATH (if it is an executable) and go into "dir" to do -# a "make all install" if it's not found. If the third -# field ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. The first field also supports a -# package name with a version range, in the form package>=1.2 -# if a particular version is desired. -# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends in the "fetch" stage. "path" is the -# name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the -# existence (if it is a full pathname) or search for -# it in your $PATH (if it is an executable) and go -# into "dir" to do a "make all install" if it's not -# found. If the third field ("target") exists, it will -# be used instead of ${DEPENDS_TARGET}. The first field -# also supports a package name with a version range, in -# the form package>=1.2 if a particular version is desired. -# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends to build (between the "extract" and -# "build" stages, inclusive). The test done to -# determine the existence of the dependency is the -# same as FETCH_DEPENDS. If the third field ("target") -# exists, it will be used instead of ${DEPENDS_TARGET}. -# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends to run. The test done to determine -# the existence of the dependency is the same as -# FETCH_DEPENDS. This will be checked during the -# "install" stage and the name of the dependency will -# be put into the package as well. If the third field -# ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. The first field also supports a -# package name with a version range, in the form package>=1.2 -# if a particular version is desired. -# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this -# package depends on. "lib" is the name of a shared library. -# make will use "ldconfig -r" to search for the library. -# lib can contain extended regular expressions. -# DEPENDS_TARGET -# - The default target to execute when a port is calling a -# dependency. -# Default: install -# -# These variables control options about how a port gets built and/or -# are shorthand notations for common sets of dependencies. -# Use these if your port uses some of the common software packages. By -# convention these should be set to 'yes', although they only need to be -# defined. Defaults: not set, unless explicitly indicated below. -# -# Note: the distinction between the USE_* and WANT_* variables, and the -# WITH_* and WITHOUT_* variables, are that the former are restricted to -# usage inside the ports framework, and the latter are reserved for user- -# settable options. (Setting USE_* in /etc/make.conf is always wrong). -# -# WITH_DEBUG - If set, debugging flags are added to CFLAGS and the -# binaries don't get stripped by INSTALL_PROGRAM or -# INSTALL_LIB. Besides, individual ports might -# add their specific to produce binaries for debugging -# purposes. You can override the debug flags that are -# passed to the compiler by setting DEBUG_FLAGS. It is -# set to "-g" at default. -# -# WITH_DEBUG_PORTS - A list of origins for which WITH_DEBUG will be set -# -# WITH_SSP_PORTS -# - If set, SSP_FLAGS (defaults to -fstack-protector) -# is added to CFLAGS and the necessary flags -# are added to LDFLAGS. Note that SSP_UNSAFE -# can be used in Makefiles by port maintainers -# if a port breaks with it (it should be -# extremely rare). -# -# USE_BZIP2 - If set, this port tarballs use bzip2, not gzip, for -# compression. -# USE_LHA - If set, this port distfile uses lha for compression -# USE_XZ - If set, this port tarballs use xz (or lzma) -# for compression -# USE_ZIP - If set, this port distfile uses zip, not tar w/[bg]zip -# for compression. -# USE_MAKESELF - If set, this port distfile uses makeself, not tar w/[bg]zip -# for compression. -# USE_DOS2UNIX - If set to "YES", remove the ^M from all files -# under ${WRKSRC}. If set to a string, remove in all -# files under ${WRKSRC} with one of these names the ^Ms. -# DOS2UNIX_REGEX -# - Limit the ^M removal to files which name matches -# the regular expression. -# USE_GCC - If set, this port requires this version of gcc, either in -# the system or installed from a port. -# USE_CSTD - Override the default C language standard (gnu89, gnu99) -# USE_CXXSTD Override the default C++ language standard -# USE_BINUTILS - Use binutils suite from port instead of the version in base. -## -# USE_GHOSTSCRIPT -# - If set, this port needs ghostscript to both -# build and run. If a number is specified, -# the specified version will be used. -# The valid value is '7', '8', or '9' in that case. -# USE_GHOSTSCRIPT_BUILD -# - If set, this port needs ghostscript to build. -# USE_GHOSTSCRIPT_RUN -# - If set, this port needs ghostscript to run. -# GHOSTSCRIPT_PORT -# - The port that provides postscript functionality. -# Some installations may wish to override the default -# to specify a version without X11 and/or localized -# versions for their nationality. -# Default: print/ghostscript9 -# WITH_GHOSTSCRIPT_VER -# - If set, the specified version of ghostscript will be -# used. The valid value is "7", "8", or "9". Note that -# this is for users, not for port maintainers. This -# should not be used in Makefile. -## -# USE_GL - A list of Mesa or GL related dependencies needed by the port. -# Supported components are: egl, glesv2, glut, glu, glw, and gl. -# If set to "yes", this is equivalent to "glu". Note that -# glew and glut depend on glu, glw and glu depend on gl. -## -# USE_SDL - If set, this port uses the sdl libraries. -# See bsd.sdl.mk for more information. -## -# USE_OPENAL - If set, this port relies on the OpenAL package. -# Legal values are: al, soft, si, alut. -# If set to an unknown value, the port is marked broken. -# WANT_OPENAL - User-specific OpenAL wishes. -# Legal values are: soft, si. The default is soft. -## -# USE_OPENSSL - If set, this port relies on the OpenSSL package. -## -# USE_OPENLDAP - If set, this port uses the OpenLDAP libraries. -# Implies: WANT_OPENLDAP_VER?=24 -# WANT_OPENLDAP_VER -# - Legal values are: 23, 24 -# If set to an unknown value, the port is marked BROKEN. -# WANT_OPENLDAP_SASL -# - If set, the system should use OpenLDAP libraries -# with SASL support. -## -# USE_FAM - If set, this port uses the File Alteration Monitor. -# -# WANT_FAM_SYSTEM -# - Legal values are: gamin (default),fam -# If set to an unknown value, the port is marked IGNORE. -## -# USE_AUTOTOOLS - If set, this port uses various GNU autotools -# (libtool, autoconf, autoheader, automake et al.) -# See bsd.autotools.mk for more details. -## -# USE_SCONS - If set, this port uses the Python-based SCons build system -# See bsd.scons.mk for more details. -## -# USE_EFL - If set, this port use EFL libraries. -# Implies inclusion of bsd.efl.mk. (Also see -# that file for more information on USE_EFL_*). -# USE_FPC - If set, this port relies on the Free Pascal language. -# Implies inclusion of bsd.fpc.mk. (Also see -# that file for more information on WANT_FPC_*). -# USE_JAVA - If set, this port relies on the Java language. -# Implies inclusion of bsd.java.mk. (Also see -# that file for more information on USE_JAVA_*). -# USE_OCAML - If set, this port relies on the OCaml language. -# Implies inclusion of bsd.ocaml.mk. (Also see -# that file for more information on USE_OCAML*). -# USE_PYTHON - If set, this port relies on the Python language. -# Implies inclusion of bsd.python.mk. (Also see -# that file for more information on USE_PYTHON_* -# and USE_PYDISTUTILS). -# USE_R_MOD - If set, this port uses the Comprehensive R Archive Network. -# See bsd.cran.mk for more details. -# USE_RUBY - If set, this port relies on the Ruby language. -# Implies inclusion of bsd.ruby.mk. (Also see -# that file for more information on USE_RUBY_*). -# USE_GNUSTEP - If set, this port relies on the GNUstep system. -# Implies the inclusion of bsd.gnustep.mk. -# (Also see that file for more information on -# USE_GNUSTEP_*). -## -# USE_GECKO - If set, this port uses the Gecko/Mozilla product. -# See bsd.gecko.mk for more details. -## -# USE_GNOME - A list of the Gnome dependencies the port has (e.g., -# glib12, gtk12). Implies that the port needs Gnome. -# Implies inclusion of bsd.gnome.mk. See bsd.gnome.mk -# or http://www.FreeBSD.org/gnome/docs/porting.html -# for more details. -## -# USE_MATE - A list of the MATE dependencies the port has. Implies -# that the port needs MATE. Implies inclusion of -# bsd.mate.mk. See bsd.mate.mk for more details. -## -# USE_LUA - If set, this port uses the Lua library and related -# components. See bsd.lua.mk for more details. -## -# USE_WX - If set, this port uses the WxWidgets library and related -# components. See bsd.wx.mk for more details. -## -# USE_KDE4 - A list of the KDE4 dependencies the port has (e.g., -# kdelibs, kdebase). Implies that the port needs KDE. -# Implies inclusion of bsd.kde4.mk. See bsd.kde4.mk -# for more details. -# -# USE_QT4 - A list of the QT4 dependencies the port has (e.g, -# corelib, webkit). Implies that the port needs Qt. -# Implies the inclusion of bsd.qt.mk. See bsd.qt.mk -# for more details. -# -# USE_LINUX - Set to yes to say the port needs the default linux base port. -# Set to value <X>, if the port needs emulators/linux_base-<X>. -# Implies appropriate settings for STRIP and STRIP_CMD. -# USE_LINUX_PREFIX -# - controls the action of PREFIX (see above). Only use this -# if the port is a linux infrastructure port (e.g. contains libs -# or a sound server which supports the FreeBSD native one), -# use the default or the X11 prefix if it's a leaf port -# (e.g. a game or program). -# Implies NO_MTREE=yes, and, if USE_LDCONFIG is defined: -# - USE_LINUX=yes -# - appropriate invocation of the Linux ldconfig -# USE_LINUX_RPM - Set to yes to pull in variables and targets useful to Linux -# RPM ports. -# Implies inclusion of bsd.linux-rpm.mk. -# -# LINUX_OSRELEASE - Contains the value of compat.linux.osrelease sysctl. -# Will be used to distinguish which linux -# infrastructure ports should be used. -# Valid values: 2.6.16. -# AUTOMATIC_PLIST -# - Set to yes to enable automatic packing list generation. -# Currently has no effect unless USE_LINUX_RPM is set. -# -# OVERRIDE_LINUX_BASE_PORT -# - This specifies the default linux base to use, for valid -# values have a look at the description of USE_LINUX. This is -# an user-only variable. Don't use it in any port, it's meant -# to be used in make.conf. -# -# LINUX_BASE_PORT -# - This is a read-only variable, it gets set to a value which is -# usable in *_DEPENDS (e.g. BUILD_DEPENDS=${LINUX_BASE_PORT}). -# It honors USE_LINUX=foo and OVERRIDE_LINUX_BASE_PORT. -## -# USE_XORG - Set to a list of X.org module dependencies. -# Implies inclusion of bsd.xorg.mk. -## -# USE_TEX - A list of the TeX dependencies the port has. -# -## -# USE_RC_SUBR - If set, the ports startup/shutdown script uses the common -# routines found in /etc/rc.subr. -# If this is set to a list of files, these files will be -# automatically added to ${SUB_FILES}, some %%VAR%%'s will -# automatically be expanded, they will be installed in -# ${PREFIX}/etc/rc.d and added to the packing list. -# USE_RCORDER - List of rc.d startup scripts to be called early in the boot -# process. This acts exactly like USE_RC_SUBR except that -# scripts are installed in /etc/rc.d. -# Because local rc.d scripts are included in the base rcorder -# this option is not needed unless the port installs in the base. -## -# USE_APACHE - If set, this port relies on an apache webserver. -# -# Conflict checking. Use if your port cannot be installed at the same time as -# another package. -# -# CONFLICTS - A list of package name patterns that the port conflicts -# with, separated by blanks. The names may include shell -# pattern meta-characters "*", "?", "[", "]", and "!". -# Example: apache*-1.2* apache*-1.3.[012345] apache-*+ssl_* -# -# CONFLICTS_BUILD -# - Check conflict prior to the build. -# -# CONFLICTS_INSTALL -# - Check conflict prior to the installation stage. -# -# Various directory definitions and variables to control them. -# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR. -# -# LOCALBASE - Where non-X11 ports install things. -# Default: /usr/local -# LINUXBASE - Where Linux ports install things. -# Default: /compat/linux -# PREFIX - Where *this* port installs its files. -# Default: ${LINUXBASE} if USE_LINUX_PREFIX is set, -# otherwise ${LOCALBASE} -# -# IGNORE_PATH_CHECKS -# - There are some sanity checks against PREFIX. -# You can disable these checks with defining -# this variable, but this is not recommended! -# Only do this if you really know what you are -# doing. These sanity checks are the following: -# - PREFIX has to be an absolute path. -# - PREFIX can't have a trailing slash. -# -# MASTERDIR - Where the port finds patches, package files, etc. Define -# this is you have two or more ports that share most of the -# files. -# Default: ${.CURDIR} -# PORTSDIR - The root of the ports tree. -# Default: /usr/ports -# DISTDIR - Where to search for and store copies of original sources -# Default: ${PORTSDIR}/distfiles -# PACKAGES - A top level directory where all packages go (rather than -# going locally to each port). -# Default: ${PORTSDIR}/packages -# WRKDIRPREFIX - The place to root the temporary working directory -# hierarchy. -# Default: none -# WRKDIR - A temporary working directory that gets *clobbered* on clean -# Default: ${WRKDIRPREFIX}${.CURDIR}/work -# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually -# unpacks to. -# Default: ${WRKDIR}/${DISTNAME} unless NO_WRKSUBDIR is set, -# in which case simply ${WRKDIR} -# WRKSRC_SUBDIR - A subdirectory of ${WRKSRC} where the distribution actually -# builds in. -# Default: not set -# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}. -# PATCHDIR - A directory containing any additional patches you made -# to port this software to FreeBSD. -# Default: ${MASTERDIR}/files -# SCRIPTDIR - A directory containing any auxiliary scripts -# Default: ${MASTERDIR}/scripts -# FILESDIR - A directory containing any miscellaneous additional files. -# Default: ${MASTERDIR}/files -# PKGDIR - A directory containing any package creation files. -# Default: ${MASTERDIR} -# SRC_BASE - The root of the src tree. (Some ports require this to get -# kernel sources). Default: /usr/src -# UID_FILES - A list of files containing information about registered UIDs. -# Note that files have decreasing priority. -# GID_FILES - A list of files containing information about registered GIDs. -# Note that files have decreasing priority. -# -# Variables that serve as convenient "aliases" for your *-install targets. -# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin". -# -# INSTALL_PROGRAM -# - A command to install binary executables. (By -# default, also strips them, unless ${STRIP} is -# overridden to be the empty string). -# INSTALL_KLD - As INSTALL_PROGRAM, but without the STRIP. -# INSTALL_LIB - As INSTALL_DATA, but also strips the file. -# INSTALL_SCRIPT -# - A command to install executable scripts. -# INSTALL_DATA - A command to install sharable data. -# INSTALL_MAN - A command to install manpages. May or not compress, -# depending on the value of MANCOMPRESSED (see below). -# -# Boolean to control whether manpages are installed. -# -# NO_INSTALL_MANPAGES -# - If set, this port doesn't want to install any manpages. -# Default: not set, i.e. manpages are installed by default. -# -# Set the following to specify all manpages that your port installs. -# These manpages will be automatically listed in ${PLIST}. Depending -# on the setting of NO_MANCOMPRESS, the make rules will compress the -# manpages for you. -# -# MAN<sect> - A list of manpages, categorized by section. For -# example, if your port has "man/man1/foo.1" and -# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n". -# The available sections chars are "123456789LN". -# MAN<sect>_<lang> -# - If your port does not install all man pages for all -# languages in MANLANG, language specific pages for -# a language can be specified with this. For example, -# if the port installs foo.1 in English, Japanese, and -# German, bar.1 in English only, and baz.3 in German -# only, set -# MANLANG= "" de ja -# MAN1= foo.1 -# MAN1_EN= bar.1 -# MAN3_DE= baz.3 -# MLINKS - A list of <source, target> tuples for creating links -# for manpages. For example, "MLINKS= a.1 b.1 c.3 d.3" -# will do an "ln -sf a.1 b.1" and "ln -sf c.3 d.3" in -# appropriate directories. (Use this even if the port -# installs its own manpage links so they will show up -# correctly in ${PLIST}.) -# MANPREFIX - The directory prefix for ${MAN<sect>} and ${MLINKS}. -# Default: ${PREFIX} -# MAN<sect>PREFIX -# - If manual pages of some sections install in different -# locations than others, use these. -# Default: ${MANPREFIX} -# MANCOMPRESSED - This variable can take values "yes", "no" or -# "maybe". "yes" means manpages are installed -# compressed; "no" means they are not; "maybe" means -# it changes depending on the value of NO_MANCOMPRESS. -# Default: "yes" if USES=imake is set and NO_INSTALL_MANPAGES -# is not set, and "no" otherwise. -# -# Set the following to specify all .info files your port installs. -# -# INFO - A list of .info files (omitting the trailing ".info"); -# only one entry per document! These files are listed in -# the path relative to ${INFO_PATH}. -# INFO_PATH - Path, where all .info files will be installed by your -# port, relative to ${PREFIX} -# Default: "share/info" if ${PREFIX} is equal to /usr -# and "info" otherwise. -# -# Set the following to specify all documentation your port installs into -# ${DOCSDIR} -# -# PORTDOCS - A list of files and directories relative to DOCSDIR. -# Shell glob patterns can be used, directories include -# the entire subtree of contained files and directories. -# Should not be set when no documentation files are -# installed. -# Useful for dynamically generated documentation. -# -# Set the following to specify all documentation your port installs into -# ${EXAMPLESDIR} -# -# PORTEXAMPLES - A list of files and directories relative to EXAMPLESDIR. -# Shell glob patterns can be used, directories include -# the entire subtree of contained files and directories. -# Should not be set when no examples files are -# installed. -# Useful for dynamically generated examples. -# -# Set the following to specify all files and directories your port installs into -# ${DATADIR} -# -# PORTDATA - A list of files and directories relative to DATADIR. -# Shell glob patterns can be used, directories include -# the entire subtree of contained files and directories. -# Should not be set when no data files are -# installed. -# Useful for dynamically generated data files. -# -# Default targets and their behaviors: -# -# fetch - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this -# port. -# fetch-list - Show list of commands to retrieve missing ${DISTFILES} and -# ${PATCHFILES} for this port. -# fetch-recursive -# - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this -# port and dependencies. -# fetch-recursive-list -# - Show list of commands to retrieve missing ${DISTFILES} and -# ${PATCHFILES} for this port and dependencies. -# fetch-required -# - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this -# port and dependencies. -# fetch-required-list -# - Show list of commands to retrieve missing ${DISTFILES} and -# ${PATCHFILES} for this port and dependencies. -# fetch-url-list -# - Show list of URLS to retrieve missing ${DISTFILES} and -# ${PATCHFILES} for this port. -# fetch-urlall-list -# - Show list of URLS to retrieve ${DISTFILES} and -# ${PATCHFILES} for this port. -# -# all-depends-list -# - Show all directories which are dependencies -# for this port. -# build-depends-list -# - Show all directories which are build-dependencies -# for this port. -# package-depends-list -# - Show all directories which are package-dependencies -# for this port. This is based upon the dependency -# tree as recorded in the Makefiles of the ports -# collection, not as recorded in the currently -# installed ports. -# actual-package-depends -# - Like package-depends-list but with the difference -# that the dependencies of the currently installed -# ports are used instead of the dependencies as -# recorded in the ports collection. -# run-depends-list -# - Show all directories which are run-dependencies -# for this port. -# -# extract - Unpacks ${DISTFILES} into ${WRKDIR}. -# patch - Apply any provided patches to the source. -# configure - Runs either GNU configure, one or more local configure -# scripts or nothing, depending on what's available. -# build - Actually compile the sources. -# install - Install the results of a build. -# reinstall - Install the results of a build, ignoring "already installed" -# flag. -# deinstall - Remove the installation. -# deinstall-all - Remove all installations with the same PKGORIGIN. -# package - Create a package from an _installed_ port. -# package-recursive -# - Create a package for a port and _all_ of its dependencies. -# describe - Try to generate a one-line description for each port for -# use in INDEX files and the like. -# checkpatch - Do a "patch -C" instead of a "patch". Note that it may -# give incorrect results if multiple patches deal with -# the same file. -# checksum - Use distinfo to ensure that your distfiles are valid. -# checksum-recursive -# - Run checksum in this port and all dependencies. -# makesum - Generate distinfo (only do this for your own ports!). -# clean - Remove ${WRKDIR} and other temporary files used for building. -# clean-depends - Do a "make clean" for all dependencies. -# config - Configure options for this port (using ${DIALOG}). -# Automatically run prior to extract, patch, configure, build, -# install, and package. -# config-recursive -# - Configure options for this port for a port and all its -# dependencies. -# showconfig - Display options config for this port. -# showconfig-recursive -# - Display options config for this port and all its -# dependencies. -# rmconfig - Remove the options config for this port. -# rmconfig-recursive -# - Remove the options config for this port and all its -# dependencies. -# -# Default sequence for "all" is: -# -# check-sanity fetch checksum extract patch configure build -# -# Please read the comments in the targets section below; you -# should be able to use the pre-* or post-* targets/scripts -# (which are available for every stage except checksum) or -# override the do-* targets to do pretty much anything you want. -# -# NEVER override the "regular" targets unless you want to open -# a major can of worms. -# -# Set these variables if your port doesn't need some of the steps. -# Note that there are no NO_PATCH or NO_CONFIGURE variables because -# those steps are empty by default. NO_EXTRACT is not allowed anymore -# since we need to at least create ${WRKDIR}. Also, NO_CHECKSUM is a user -# variable and is not to be set in a port's Makefile. See above for NO_PACKAGE. -# -# NO_BUILD - Use a dummy (do-nothing) build target. -# NO_INSTALL - Use a dummy (do-nothing) install target. -# -# Here are some variables used in various stages. -# -# For options see bsd.options.mk -# -# For fetch: -# -# FETCH_BINARY - Path to ftp/http fetch command if not in $PATH. -# Default: "/usr/bin/fetch" -# FETCH_ARGS - Arguments to ftp/http fetch command. -# Default: "-AFpr" -# FETCH_CMD - ftp/http fetch command. -# Default: ${FETCH_BINARY} ${FETCH_ARGS} -# FETCH_BEFORE_ARGS -# - Arguments to ${FETCH_CMD} before filename. -# Default: none -# FETCH_AFTER_ARGS -# - Arguments to ${FETCH_CMD} following filename. -# Default: none -# FETCH_ENV - Environment to pass to ${FETCH_CMD}. -# Default: none -# FETCH_REGET - Times to retry fetching of files on checksum errors. -# Default: 1 -# CLEAN_FETCH_ENV -# - Disable package dependency in fetch target for mass -# fetching. User settable. -# -# For extract: -# -# EXTRACT_CMD - Command for extracting archive: "bzip2" if USE_BZIP2 -# is set, "unzip" if USE_ZIP is set, "unmakeself" if -# USE_MAKESELF if set, "gzip" otherwise. -# EXTRACT_BEFORE_ARGS -# - Arguments to ${EXTRACT_CMD} before filename. -# Default: "-dc" -# EXTRACT_AFTER_ARGS -# - Arguments to ${EXTRACT_CMD} following filename. -# default: "| tar -xf -" -# EXTRACT_PRESERVE_OWNERSHIP -# - Normally, when run as "root", the extract stage will -# change the owner and group of all files under ${WRKDIR} -# to 0:0. Set this variable if you want to turn off this -# feature. -# For patch: -# -# EXTRA_PATCHES - Define this variable if you have patches not in -# ${PATCHDIR}. This usually happens when you need to -# do some pre-processing before some distribution -# patches can be applied. In that case, fetch them as -# extra distfiles, put the processed results in -# ${WRKDIR}, then point EXTRA_PATCHES to them. -# The patches specified by this variable will be -# applied after the normal distribution patches but -# before those in ${PATCHDIR}. -# PATCH_WRKSRC - Directory to apply patches in. -# Default: ${WRKSRC} -# -# For configure: -# -# HAS_CONFIGURE - If set, this port has its own configure script. The -# configure stage will not do anything if this is not set. -# GNU_CONFIGURE - If set, you are using GNU configure (optional). Implies -# HAS_CONFIGURE. -# CONFIGURE_WRKSRC -# - Directory to run configure in. -# Default: ${WRKSRC} -# CONFIGURE_SCRIPT -# - Name of configure script, relative to ${CONFIGURE_WRKSRC}. -# Default: "Makefile.PL" if USES=perl5 and USE_PERL5=configure -# are set, "configure" otherwise. -# CONFIGURE_TARGET -# - The name of target to call when GNU_CONFIGURE is -# defined. -# Default: ${ARCH}-portbld-freebsd${OSREL} -# GNU_CONFIGURE_PREFIX -# - The directory passed as prefix to the configure script if -# GNU_CONFIGURE is set. -# Default: ${PREFIX} -# CONFIGURE_ARGS -# - Pass these args to configure if ${HAS_CONFIGURE} is set. -# Default: "--prefix=${GNU_CONFIGURE_PREFIX} --infodir=${PREFIX}/${INFO_PATH} -# --mandir=${MANPREFIX}/man --build=${CONFIGURE_TARGET}" if -# GNU_CONFIGURE is set, "CC=${CC} CFLAGS=${CFLAGS} -# PREFIX=${PREFIX} INSTALLPRIVLIB=${PREFIX}/lib -# INSTALLARCHLIB=${PREFIX}/lib" if USES=perl5 and -# USE_PERL5=configure are set, empty otherwise. -# CONFIGURE_ENV - Pass these env (shell-like) to configure if -# ${HAS_CONFIGURE} is set. -# CONFIGURE_LOG - The name of configure log file. It will be printed to -# the screen if configure fails. -# Default: config.log -# CONFIGURE_FAIL_MESSAGE -# - A message displayed to users when configure -# fails (note: this assumes the do-configure -# target has not been overwritten). This message -# will be passed through /usr/bin/fmt before -# being shown to the user. -# -# WITHOUT_FBSD10_FIX Disable FreeBSD 10.0 autotools workaround. -# -# For build and install: -# -# MAKEFILE - Name of the makefile. -# Default: Makefile -# ALL_TARGET - Default target for sub-make in build stage. -# Default: all -# BUILD_WRKSRC - Directory to do build in (default: ${WRKSRC}). -# MAKE_ENV - Additional environment vars passed to sub-make in build -# and install stages. -# Default: see below -# MAKE_ARGS - Any extra arguments to sub-make in build and install stages. -# Default: none -## -# MAKE_JOBS_UNSAFE -# - Disallow multiple jobs even when user set a global override. -# To be used with known bad ports. -# DISABLE_MAKE_JOBS -# - Set to disable the multiple jobs feature. User settable. -# MAKE_JOBS_NUMBER -# - Override the number of make jobs to be used. User settable. -# MAKE_JOBS_NUMBER_LIMIT -# - Set a limit for maximum number of make jobs allowed to be -# used. -## cacche -# -# WITH_CCACHE_BUILD -# - Enable CCACHE support (devel/ccache). User settable. -# CCACHE_DIR -# - Which directory to use for ccache (default: $HOME/.ccache) -# NO_CCACHE -# - Disable CCACHE support for example for certain ports if -# CCACHE is enabled. User settable. -# -# For install: -# -# INSTALL_TARGET -# - Default target for sub-make in install stage. -# Default: install -# INSTALL_WRKSRC -# - Directory to install from -# Default: ${WRKSRC} -# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from -# the "install" target. -# MTREE_FILE - The name of the mtree file. -# Default: ${PORTSDIR}/Templates/BSD.local.dist or -# /etc/mtree/BSD.usr.dist if ${PREFIX} == "/usr". -# PLIST_DIRS - Directories to be added to packing list -# PLIST_DIRSTRY - Directories to be added to packing list and try to remove them. -# PLIST_FILES - Files and symbolic links to be added to packing list -# -# PLIST - Name of the `packing list' file. -# Change this to ${WRKDIR}/PLIST or something if you -# need to write to it. (It is not a good idea for a port -# to write to any file outside ${WRKDIR} during a normal -# build.) -# Default: ${PKGDIR}/pkg-plist -# TMPPLIST - Name of the `packing list' file after processing -# Default: ${WRKDIR}/.PLIST.mktmp -# PLIST_SUB - List of "variable=value" pair for substitution in ${PLIST} -# Default: see below -# -# SUB_FILES - Files that should be passed through sed and redirected to -# ${WRKDIR}. -# - For each file specified in SUB_FILES, there must be a -# corresponding file in ${FILESDIR} whose suffix is ".in". For -# instance, if the Makefile specifies "SUB_FILES= pkg-message" -# then there must be a file called pkg-message.in in -# ${FILESDIR}. -# - The substitution process is the same as PLIST_FILES, as -# described below except that any line beginning with @comment -# is deleted. -# SUB_LIST - List of "variable=value" pair for substitution in ${SUB_FILES} -# Some pairs are added by default: eg. PREFIX=${PREFIX} -# -# USE_LDCONFIG - If set to "yes", this adds ${PREFIX}/lib to the list of -# directories to be searched for shared libraries. -# Otherwise, this is a list of directories to be added to that -# list. The directory names are written to -# ${PREFIX}/libdata/ldconfig/${UNIQUENAME} which is then -# used by the ldconfig startup script. -# This mechanism replaces ldconfig scripts installed by some -# ports, often under such names as 000.${UNQUENAME}.sh. -# If USE_LINUX_PREFIX is defined, the Linux version of -# ldconfig will be used instead of the native FreeBSD -# version, and the directory list given will be ignored. -# USE_LDCONFIG32 -# - Same as USE_LDCONFIG but the target file is -# ${PREFIX}/libdata/ldconfig32/${UNIQUENAME} instead. -# Note: that should only be used on 64-bit architectures. -# NO_LDCONFIG_MTREE -# - Denotes whether the libdata/ldconfig directory is part of -# the mtree on a given OSVERSION system. If it is not, we -# create the directory, pull in the ldconfig_compat port, -# and clean up on de-installation. NOTE: this variable is -# internal to bsd.port.mk and must not be set in your Makefile. -# -# DOCSDIR - Name of the directory to install the packages docs in. -# Default: ${PREFIX}/share/doc/${PORTNAME} -# DOCSDIR_REL - The DOCSDIR relative to ${PREFIX} -# EXAMPLESDIR - Name of the directory to install the packages examples in. -# Default: ${PREFIX}/share/examples/${PORTNAME} -# EXAMPLESDIR_REL -# - The EXAMPLESDIR relative to ${PREFIX} -# DATADIR - Name of the directory to install the packages shared data in. -# Default: ${PREFIX}/share/${PORTNAME} -# DATADIR_REL - The DATADIR relative to ${PREFIX} -# -# WWWDIR - Name of the directory to install the packages www data in. -# Default: ${PREFIX}/www/${PORTNAME} -# WWWDIR_REL - The WWWDIR relative to ${PREFIX} -# -# USERS - List of users to create at install time. Each login must -# have a corresponding entry in ${UID_FILES}. -# GROUPS - List of groups to create at install time. Each group must -# have a corresponding entry in ${GID_FILES}. -# -# DESKTOPDIR - Name of the directory to install ${DESKTOP_ENTRIES} in. -# Default: ${PREFIX}/share/applications -# DESKTOP_ENTRIES -# - List of desktop entry files to generate and install in -# ${DESKTOPDIR}. The format is -# "Name" "Comment" "Icon" "Exec" "Categories" StartupNotify -# Rules: -# * Only add desktop entries for applications which do not -# require a terminal (ie. X applications). -# * If the upstream distribution already installs .desktop -# files, you do not need to use this. -# * If you require a more elaborate .desktop file than this -# variable permits, write it yourself and install it -# in ${DESKTOPDIR}. -# Notes: -# * Comment, Icon and StartupNotify may be empty -# strings (""). Categories may be an empty string in some -# cases (see below). The other fields are mandatory. -# * If Comment is an empty string, port ${COMMENT} will be -# used. -# * If set, Icon must be either absolute path (usually -# ${PREFIX}/share/pixmaps/${PORTNAME}.png) or icon name -# without extension if installed icons follow Icon Theme -# Specification. -# * If Categories is an empty string, bsd.port.mk will try -# to deduce a default value using the CATEGORIES variable. -# If the deduction fails, you will have to set Categories -# manually. You should check the generated value using -# "make desktop-categories", and override it if necessary. -# * Exec will also be used to name the .desktop file. -# * StartupNotify may be true, false or empty (see Desktop -# Entry Specification for details). -# * The files will be automatically added to ${PLIST}. -# Example: -# "X Window Information" \ -# "Get information about X windows" \ -# "${PREFIX}/share/pixmaps/wininfo.png" \ -# "${PREFIX}/bin/wininfo" \ -# "System;" \ -# "" -# See http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html -# for an explanation of the fields. If you need to create more -# than one file, just chain them into a single variable. -# -# Note that the install target will automatically add manpages (see -# above) and also substitute special sequences of characters (delimited -# by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}. For -# instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of -# "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL. -# ${TMPPLIST} is generated before the do-install stage. If you are -# generating the packing list on-the-fly, make sure it's generated before -# do-install is called! -# -# For package: -# -# NO_LATEST_LINK -# - Do not install the "Latest" link for package. Define this -# if this port is a beta version of another stable port -# which is also in the tree. -# LATEST_LINK - Install the "Latest" link for the package as ___. Define -# this if the "Latest" link name will be incorrectly determined. -# -# This is used in all stages: -# -# SCRIPTS_ENV - Additional environment vars passed to scripts in -# ${SCRIPTDIR} executed by bsd.port.mk. -# Default: see below -# -# Finally, variables to change if you want a special behavior. These -# are for debugging purposes. Don't set them in your Makefile. -# -# ECHO_MSG - Used to print all the '===>' style prompts - override this -# to turn them off. -# Default: ${ECHO_CMD} -# PATCH_DEBUG - If set, print out more information about the patches as -# it attempts to apply them. -# PKG_DBDIR - Where package installation is recorded; this directory -# must not contain anything else. -# Default: /var/db/pkg -# PORT_DBDIR - Where port configuration options are recorded. -# Default: /var/db/ports -# NO_PKG_REGISTER -# - Don't register a port installation as a package. -# FORCE_PKG_REGISTER -# - If set, it will overwrite any existing package -# registration information in ${PKG_DBDIR}/${PKGNAME}. -# NO_DEPENDS - Don't verify build of dependencies. -# CHECKSUM_ALGORITHMS -# - Different checksum algorithms to check for verifying the -# integrity of the distfiles. The absence of the algorithm -# in distinfo doesn't make it fail. -# Default: sha256 -# NO_CHECKSUM - Don't verify the checksum. Typically used when -# when you noticed the distfile you just fetched has -# a different checksum and you intend to verify if -# the port still works with it. -# USE_PACKAGE_DEPENDS -# - Try to install dependencies from existing packages instead -# of building the port from scratch. Fallback on source -# if an existing package is not present. -# USE_PACKAGE_DEPENDS_ONLY -# - Like USE_PACKAGE_DEPENDS, but do not fallback on source. -# INSTALL_AS_USER -# - Define this to install as the current user, intended -# for systems where you have no root access. -# DISABLE_SIZE - Do not check the size of a distfile even if the SIZE field -# has been specified in distinfo. This is useful -# when using an alternate FETCH_CMD. -# -# End of the list of all variables that need to be defined in a port. -# Most port authors should not need to understand anything after this point. -# - -# These need to be absolute since we don't know how deep in the ports -# tree we are and thus can't go relative. They can, of course, be overridden -# by individual Makefiles or local system make configuration. -PORTSDIR?= /usr/ports -LOCALBASE?= /usr/local -LINUXBASE?= /compat/linux -DISTDIR?= ${PORTSDIR}/distfiles -_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR} -INDEXDIR?= ${PORTSDIR} -SRC_BASE?= /usr/src -USESDIR?= ${PORTSDIR}/Mk/Uses -SCRIPTSDIR?= ${PORTSDIR}/Mk/Scripts -LIB_DIRS?= /lib /usr/lib ${LOCALBASE}/lib - -.if defined(FORCE_STAGE) -.undef NO_STAGE -.endif - -# make sure bmake treats -V as expected -.MAKE.EXPAND_VARIABLES= yes -# tell bmake we use the old :L :U modifiers -.MAKE.FreeBSD_UL= yes - -.include "${PORTSDIR}/Mk/bsd.commands.mk" - -# -# DESTDIR section to start a chrooted process if invoked with DESTDIR set -# - -.if defined(DESTDIR) && !empty(DESTDIR) && !defined(CHROOTED) && \ - !defined(BEFOREPORTMK) && !defined(INOPTIONSMK) - -.include "${PORTSDIR}/Mk/bsd.destdir.mk" - -.else - -# Look for ${PATCH_WRKSRC}/.../*.orig files, and (re-)create -# ${FILEDIR}/patch-* files from them. - -.if !target(makepatch) -makepatch: - @${MKDIR} ${FILESDIR} - @(cd ${PATCH_WRKSRC}; \ - for i in `find . -type f -name '*.orig'`; do \ - ORG=$$i; \ - NEW=$${i%.orig}; \ - OUT=${FILESDIR}`${ECHO} $${NEW} | \ - ${SED} -e 's|/|__|g' \ - -e 's|^\.__|/patch-|'`; \ - ${ECHO} ${DIFF} -ud $${ORG} $${NEW} '>' $${OUT}; \ - ${DIFF} -ud $${ORG} $${NEW} > $${OUT} || ${TRUE}; \ - done \ - ) -.endif - - -# Start of options section -.if defined(INOPTIONSMK) || ( !defined(USEOPTIONSMK) && !defined(AFTERPORTMK) ) - - -# Get the default maintainer -MAINTAINER?= ports@FreeBSD.org - -# Get the architecture -.if !defined(ARCH) -ARCH!= ${UNAME} -p -.endif - -# Get the operating system type -.if !defined(OPSYS) -OPSYS!= ${UNAME} -s -.endif - -# Get the operating system revision -.if !defined(OSREL) -OSREL!= ${UNAME} -r | ${SED} -e 's/[-(].*//' -.endif - -# Get __FreeBSD_version -.if !defined(OSVERSION) -.if exists(/usr/include/sys/param.h) -OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h -.elif exists(${SRC_BASE}/sys/sys/param.h) -OSVERSION!= ${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < ${SRC_BASE}/sys/sys/param.h -.else -OSVERSION!= ${SYSCTL} -n kern.osreldate -.endif -.endif - -.if ${OSVERSION} >= 1000017 -.if !defined(WITHOUT_PKGNG) -WITH_PKGNG?= yes -.else -.undef WITH_PKGNG -.endif -.endif - -# Enable new xorg for FreeBSD versions after Radeon KMS was imported unless -# WITHOUT_NEW_XORG is set. -# XXX - This version should switch to whatever version newcons gets. -.if ${OSVERSION} >= 1100000 -. if !defined(WITHOUT_NEW_XORG) -WITH_NEW_XORG?= yes -. else -.undef WITH_NEW_XORG -. endif -.endif - -# Only define tools here (for transition period with between pkg tools) -.include "${PORTSDIR}/Mk/bsd.commands.mk" - -MASTERDIR?= ${.CURDIR} - -.if ${MASTERDIR} != ${.CURDIR} -SLAVE_PORT?= yes -MASTER_PORT?=${MASTERDIR:C/[^\/]+\/\.\.\///:C/[^\/]+\/\.\.\///:C/^.*\/([^\/]+\/[^\/]+)$/\\1/} -.else -SLAVE_PORT?= no -MASTER_PORT?= -.endif - -# If they exist, include Makefile.inc, then architecture/operating -# system specific Makefiles, then local Makefile.local. - -.if ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/../Makefile.inc) -.include "${.CURDIR}/../Makefile.inc" -USE_SUBMAKE= yes -.endif - -.if exists(${MASTERDIR}/../Makefile.inc) -.include "${MASTERDIR}/../Makefile.inc" -USE_SUBMAKE= yes -.endif - -.if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS}) -.include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}" -USE_SUBMAKE= yes -.elif exists(${MASTERDIR}/Makefile.${OPSYS}) -.include "${MASTERDIR}/Makefile.${OPSYS}" -USE_SUBMAKE= yes -.elif exists(${MASTERDIR}/Makefile.${ARCH}) -.include "${MASTERDIR}/Makefile.${ARCH}" -USE_SUBMAKE= yes -.endif - -.if exists(${MASTERDIR}/Makefile.local) -.include "${MASTERDIR}/Makefile.local" -USE_SUBMAKE= yes -.endif - -.for _CATEGORY in ${CATEGORIES} -PKGCATEGORY?= ${_CATEGORY} -.endfor -_PORTDIRNAME= ${.CURDIR:T} -PORTDIRNAME?= ${_PORTDIRNAME} -PKGORIGIN?= ${PKGCATEGORY}/${PORTDIRNAME} - -# where 'make config' records user configuration options -PORT_DBDIR?= /var/db/ports - -UID_FILES?= ${PORTSDIR}/UIDs -GID_FILES?= ${PORTSDIR}/GIDs -UID_OFFSET?= 0 -GID_OFFSET?= 0 - -# predefined accounts from src/etc/master.passwd -# alpha numeric sort order -USERS_BLACKLIST= _dhcp _pflogd auditdistd bin bind daemon games hast kmem mailnull man news nobody operator pop proxy root smmsp sshd toor tty uucp www - -LDCONFIG_DIR= libdata/ldconfig -LDCONFIG32_DIR= libdata/ldconfig32 - -.if defined(LATEST_LINK) -UNIQUENAME?= ${LATEST_LINK} -.else -UNIQUENAME?= ${PKGNAMEPREFIX}${PORTNAME} -.endif - -.endif - -DOS2UNIX_REGEX?= .* - -# At least KDE needs TMPDIR for the package building, -# so we're setting it to the known default value. -.if defined(PACKAGE_BUILDING) -TMPDIR?= /tmp -.endif # defined(PACKAGE_BUILDING) - -# Respect TMPDIR passed via make.conf or similar and pass it down -# to configure and make. -.if defined(TMPDIR) -MAKE_ENV+= TMPDIR="${TMPDIR}" -CONFIGURE_ENV+= TMPDIR="${TMPDIR}" -.endif # defined(TMPDIR) - -.if defined(WITH_DEBUG_PORTS) -.if ${WITH_DEBUG_PORTS:M${PKGORIGIN}} -WITH_DEBUG= yes -.endif -.endif - -# Reset value from bsd.own.mk. -.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG) -STRIP= #none -.endif - -.include "${PORTSDIR}/Mk/bsd.options.mk" - -# Start of pre-makefile section. -.if !defined(AFTERPORTMK) && !defined(INOPTIONSMK) - -.include "${PORTSDIR}/Mk/bsd.sanity.mk" - -_PREMKINCLUDED= yes - -.if defined(PORTVERSION) -.if ${PORTVERSION:M*[-_,]*}x != x -IGNORE= PORTVERSION ${PORTVERSION} may not contain '-' '_' or ',' -.endif -DISTVERSION?= ${PORTVERSION:S/:/::/g} -.elif defined(DISTVERSION) -PORTVERSION= ${DISTVERSION:L:C/([a-z])[a-z]+/\1/g:C/([0-9])([a-z])/\1.\2/g:C/:(.)/\1/g:C/[^a-z0-9+]+/./g} -.endif - -PORTREVISION?= 0 -.if ${PORTREVISION} != 0 -_SUF1= _${PORTREVISION} -.endif - -PORTEPOCH?= 0 -.if ${PORTEPOCH} != 0 -_SUF2= ,${PORTEPOCH} -.endif - -PKGVERSION= ${PORTVERSION:C/[-_,]/./g}${_SUF1}${_SUF2} -PKGNAME= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PKGVERSION} -DISTNAME?= ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION:C/:(.)/\1/g}${DISTVERSIONSUFFIX} - -INDEXFILE?= INDEX-${OSVERSION:C/([0-9]*)[0-9]{5}/\1/} - -DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME} -EXAMPLESDIR?= ${PREFIX}/share/examples/${PORTNAME} -DATADIR?= ${PREFIX}/share/${PORTNAME} -WWWDIR?= ${PREFIX}/www/${PORTNAME} -ETCDIR?= ${PREFIX}/etc/${PORTNAME} - -.if defined(USE_LINUX_RPM) -.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk" -.endif - -.if defined(USE_LINUX_APPS) -.include "${PORTSDIR}/Mk/bsd.linux-apps.mk" -.endif - -.if defined(USE_XORG) || defined(XORG_CAT) -.include "${PORTSDIR}/Mk/bsd.xorg.mk" -.endif - -PACKAGES?= ${PORTSDIR}/packages -TEMPLATES?= ${PORTSDIR}/Templates - -PATCHDIR?= ${MASTERDIR}/files -FILESDIR?= ${MASTERDIR}/files -SCRIPTDIR?= ${MASTERDIR}/scripts -PKGDIR?= ${MASTERDIR} - -.if defined(USE_LINUX_PREFIX) -PREFIX?= ${LINUXBASE} -NO_MTREE= yes -.else -PREFIX?= ${LOCALBASE} -.endif - -.if defined(USE_LINUX_PREFIX) -LDCONFIG_CMD?= ${LINUXBASE}/sbin/ldconfig -r ${LINUXBASE} -.endif - -PKGCOMPATDIR?= ${LOCALBASE}/lib/compat/pkg - -.if defined(USE_LOCAL_MK) -.include "${PORTSDIR}/Mk/bsd.local.mk" -.endif - -.if defined(USE_OPENSSL) -.include "${PORTSDIR}/Mk/bsd.openssl.mk" -.endif - -.if defined(USE_EMACS) -.include "${PORTSDIR}/Mk/bsd.emacs.mk" -.endif - -.if defined(USE_GNUSTEP) -.include "${PORTSDIR}/Mk/bsd.gnustep.mk" -.endif - -.if defined(USE_PHP) -.include "${PORTSDIR}/Mk/bsd.php.mk" -.endif - -.if defined(USE_PYTHON) || defined(USE_PYTHON_BUILD) || defined(USE_PYTHON_RUN) -.include "${PORTSDIR}/Mk/bsd.python.mk" -.endif - -.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART) -.include "${PORTSDIR}/Mk/bsd.efl.mk" -.endif - -.if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL) -.include "${PORTSDIR}/Mk/bsd.fpc.mk" -.endif - -.if defined(USE_JAVA) -.include "${PORTSDIR}/Mk/bsd.java.mk" -.endif - -.if defined(USE_R_MOD) -.include "${PORTSDIR}/Mk/bsd.cran.mk" -.endif - -.if defined(USE_RUBY) || defined(USE_LIBRUBY) -.include "${PORTSDIR}/Mk/bsd.ruby.mk" -.endif - -.if defined(USE_OCAML) -.include "${PORTSDIR}/Mk/bsd.ocaml.mk" -.endif - -.if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TCL_RUN) || defined(USE_TCL_WRAPPER) || defined(USE_TK) || defined(USE_TK_BUILD) || defined(USE_TK_RUN) || defined(USE_TK_WRAPPER) -.include "${PORTSDIR}/Mk/bsd.tcl.mk" -.endif - -.if defined(USE_APACHE) || defined(USE_APACHE_BUILD) || defined(USE_APACHE_RUN) -.include "${PORTSDIR}/Mk/bsd.apache.mk" -.endif - -.if defined(USE_QT4) -.include "${PORTSDIR}/Mk/bsd.qt.mk" -.endif - -.if defined(USE_TEX) -.include "${PORTSDIR}/Mk/bsd.tex.mk" -.endif - -.if defined(USE_DRUPAL) -.include "${PORTSDIR}/Mk/bsd.drupal.mk" -.endif - -.if defined(WANT_GECKO) || defined(USE_GECKO) || defined(USE_FIREFOX) || defined(USE_FIREFOX_BUILD) || defined(USE_SEAMONKEY) || defined(USE_SEAMONKEY_BUILD) || defined(USE_THUNDERBIRD) || defined(USE_THUNDERBIRD_BUILD) -.include "${PORTSDIR}/Mk/bsd.gecko.mk" -.endif - -.if defined(WANT_GNOME) || defined(USE_GNOME) || defined(INSTALLS_ICONS) -.include "${PORTSDIR}/Mk/bsd.gnome.mk" -.endif - -.if defined(USE_MATE) -.include "${PORTSDIR}/Mk/bsd.mate.mk" -.endif - -.if defined(WANT_LUA) || defined(USE_LUA) || defined(USE_LUA_NOT) -.include "${PORTSDIR}/Mk/bsd.lua.mk" -.endif - -.if defined(WANT_WX) || defined(USE_WX) || defined(USE_WX_NOT) -.include "${PORTSDIR}/Mk/bsd.wx.mk" -.endif - -.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER1) -.include "${PORTSDIR}/Mk/bsd.gstreamer.mk" -.endif - -.if defined(USE_SDL) || defined(WANT_SDL) -.include "${PORTSDIR}/Mk/bsd.sdl.mk" -.endif - -.if defined(USE_XFCE) -.include "${PORTSDIR}/Mk/bsd.xfce.mk" -.endif - -.if defined(USE_KDE4) || defined(KDE4_BUILDENV) -.include "${PORTSDIR}/Mk/bsd.kde4.mk" -.endif - -.include "${PORTSDIR}/Mk/bsd.pbi.mk" - -.if defined(USE_GMAKE) -USES+= gmake -.endif - -.if !defined(UID) -UID!= ${ID} -u -.endif - -# Loading features -.for f in ${USES} -_f=${f:C/\:.*//g} -.if ${_f} != ${f} -${_f}_ARGS:= ${f:C/^[^\:]*\://g} -.endif -.include "${USESDIR}/${_f}.mk" -.endfor - -.if defined(USE_BZIP2) -EXTRACT_SUFX?= .tar.bz2 -.elif defined(USE_LHA) -EXTRACT_SUFX?= .lzh -.elif defined(USE_ZIP) -EXTRACT_SUFX?= .zip -.elif defined(USE_XZ) -EXTRACT_SUFX?= .tar.xz -.elif defined(USE_MAKESELF) -EXTRACT_SUFX?= .run -.else -EXTRACT_SUFX?= .tar.gz -.endif - -# You can force skipping these test by defining IGNORE_PATH_CHECKS -.if !defined(IGNORE_PATH_CHECKS) -.if ! ${PREFIX:M/*} -.BEGIN: - @${ECHO_MSG} "PREFIX must be defined as an absolute path so that when 'make'" - @${ECHO_MSG} "is invoked in the work area PREFIX points to the right place." - @${FALSE} -.endif -.endif - -# Location of mounted CDROM(s) to search for files -CD_MOUNTPTS?= /cdrom ${CD_MOUNTPT} - -# Owner and group of the WWW user -WWWOWN?= www -WWWGRP?= www - -.endif -# End of pre-makefile section. - -# Start of post-makefile section. -.if !defined(BEFOREPORTMK) && !defined(INOPTIONSMK) - -.if defined(_POSTMKINCLUDED) -check-makefile:: - @${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.post].mk twice" - @${FALSE} -.endif - -_POSTMKINCLUDED= yes - -WRKDIR?= ${WRKDIRPREFIX}${.CURDIR}/work -.if !defined(IGNORE_MASTER_SITE_GITHUB) && defined(USE_GITHUB) -WRKSRC?= ${WRKDIR}/${GH_ACCOUNT}-${GH_PROJECT}-${GH_COMMIT} -.endif -.if defined(NO_WRKSUBDIR) -WRKSRC?= ${WRKDIR} -.else -WRKSRC?= ${WRKDIR}/${DISTNAME} -.endif -.if defined(WRKSRC_SUBDIR) -WRKSRC:= ${WRKSRC}/${WRKSRC_SUBDIR} -.endif - -PATCH_WRKSRC?= ${WRKSRC} -CONFIGURE_WRKSRC?= ${WRKSRC} -BUILD_WRKSRC?= ${WRKSRC} -INSTALL_WRKSRC?=${WRKSRC} - -PLIST_SUB+= OSREL=${OSREL} PREFIX=%D LOCALBASE=${LOCALBASE} -SUB_LIST+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} \ - DATADIR=${DATADIR} DOCSDIR=${DOCSDIR} EXAMPLESDIR=${EXAMPLESDIR} \ - WWWDIR=${WWWDIR} ETCDIR=${ETCDIR} - -PLIST_REINPLACE+= dirrmtry stopdaemon rmtry -PLIST_REINPLACE_DIRRMTRY=s!^@dirrmtry \(.*\)!@unexec rmdir "%D/\1" 2>/dev/null || true! -PLIST_REINPLACE_RMTRY=s!^@rmtry \(.*\)!@unexec rm -f %D/\1 2>/dev/null || true! -PLIST_REINPLACE_STOPDAEMON=s!^@stopdaemon \(.*\)!@unexec %D/etc/rc.d/\1 forcestop 2>/dev/null || true! - -# kludge to strip trailing whitespace from CFLAGS; -# sub-configure will not # survive double space -CFLAGS:= ${CFLAGS:C/ $//} - -.if defined(WITHOUT_CPU_CFLAGS) -.if defined(_CPUCFLAGS) -.if !empty(_CPUCFLAGS) -CFLAGS:= ${CFLAGS:C/${_CPUCFLAGS}//} -.endif -.endif -.endif - -.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG) -STRIP_CMD= ${TRUE} -DEBUG_FLAGS?= -g -CFLAGS:= ${CFLAGS:N-O*:N-fno-strict*} ${DEBUG_FLAGS} -.endif - -.if defined(WITH_SSP) || defined(WITH_SSP_PORTS) -.include "${PORTSDIR}/Mk/bsd.ssp.mk" -.endif - -.if defined(NOPORTDOCS) -PLIST_SUB+= PORTDOCS="@comment " -.else -PLIST_SUB+= PORTDOCS="" -.endif - -.if defined(NOPORTEXAMPLES) -PLIST_SUB+= PORTEXAMPLES="@comment " -.else -PLIST_SUB+= PORTEXAMPLES="" -.endif - -.if defined(NOPORTDATA) -PLIST_SUB+= PORTDATA="@comment " -.else -PLIST_SUB+= PORTDATA="" -.endif - -CONFIGURE_SHELL?= ${SH} -MAKE_SHELL?= ${SH} - -CONFIGURE_ENV+= SHELL=${SH} CONFIG_SHELL=${SH} -MAKE_ENV+= SHELL=${SH} NO_LINT=YES - -.if defined(MANCOMPRESSED) -.if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \ - ${MANCOMPRESSED} != maybe -check-makevars:: - @${ECHO_MSG} "${PKGNAME}: Makefile error: value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\"". - @${FALSE} -.endif -.endif - -MANCOMPRESSED?= no - -.if defined(PATCHFILES) -.if ${PATCHFILES:M*.zip}x != x -PATCH_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip -.endif -.endif - -# Check the compatibility layer for amd64/ia64 - -.if ${ARCH} == "amd64" || ${ARCH} =="ia64" -.if exists(/usr/lib32) -HAVE_COMPAT_IA32_LIBS?= YES -.endif -.if !defined(HAVE_COMPAT_IA32_KERN) -HAVE_COMPAT_IA32_KERN!= if ${SYSCTL} -n compat.ia32.maxvmem >/dev/null 2>&1; then echo YES; fi; echo -.if empty(HAVE_COMPAT_IA32_KERN) -.undef HAVE_COMPAT_IA32_KERN -.endif -.endif -.endif - -.if defined(IA32_BINARY_PORT) && ${ARCH} != "i386" -.if ${ARCH} == "amd64" || ${ARCH} == "ia64" -.if !defined(HAVE_COMPAT_IA32_KERN) -IGNORE= requires a kernel with compiled-in IA32 compatibility -.elif !defined(HAVE_COMPAT_IA32_LIBS) -IGNORE= requires 32-bit libraries installed under /usr/lib32 -.endif -_LDCONFIG_FLAGS=-32 -LIB32DIR= lib32 -.else -IGNORE= requires i386 (or compatible) platform to run -.endif -.else -LIB32DIR= lib -.endif -PLIST_SUB+= LIB32DIR=${LIB32DIR} - -PKGNG_ORIGIN?= ports-mgmt/pkg -.if defined(WITH_PKGNG) -.if ${WITH_PKGNG} == devel -PKGNG_ORIGIN= ports-mgmt/pkg-devel -.endif -.if !defined(PKG_DEPENDS) -.if !defined(CLEAN_FETCH_ENV) -PKG_DEPENDS+= ${LOCALBASE}/sbin/pkg:${PORTSDIR}/${PKGNG_ORIGIN} -.endif -.endif -.endif - -.if defined(USE_LHA) -EXTRACT_DEPENDS+= lha:${PORTSDIR}/archivers/lha -.endif -.if defined(USE_ZIP) -EXTRACT_DEPENDS+= ${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip -.endif -.if defined(USE_XZ) && ( (${OSVERSION} >= 900000 && ${OSVERSION} < 900012) || ${OSVERSION} < 800505 ) -EXTRACT_DEPENDS+= ${LOCALBASE}/bin/xz:${PORTSDIR}/archivers/xz -.endif -.if defined(USE_MAKESELF) -EXTRACT_DEPENDS+= unmakeself:${PORTSDIR}/archivers/unmakeself -.endif - -.if defined(USE_GCC) || defined(USE_FORTRAN) -.include "${PORTSDIR}/Mk/bsd.gcc.mk" -.endif - -.if defined(USE_BINUTILS) && !defined(DISABLE_BINUTILS) -BUILD_DEPENDS+= ${LOCALBASE}/bin/as:${PORTSDIR}/devel/binutils -BINUTILS?= ADDR2LINE AR AS CPPFILT GPROF LD NM OBJCOPY OBJDUMP RANLIB \ - READELF SIZE STRINGS -BINUTILS_NO_MAKE_ENV?= -. for b in ${BINUTILS} -${b}= ${LOCALBASE}/bin/${b:C/PP/++/:L} -. if defined(GNU_CONFIGURE) || defined(BINUTILS_CONFIGURE) -CONFIGURE_ENV+= ${b}="${${b}}" -. endif -. if ${BINUTILS_NO_MAKE_ENV:M${b}} == "" -MAKE_ENV+= ${b}="${${b}}" -. endif -. endfor -.endif - -.if defined(USE_OPENLDAP) || defined(WANT_OPENLDAP_VER) -.include "${PORTSDIR}/Mk/bsd.ldap.mk" -.endif - -.if defined(USE_OPENAL) -_OPENAL_ALL= al si soft alut -_OPENAL_LIBS= si soft -# Default choice. -_DEFAULT_OPENAL= soft - -_OPENAL_SOFT= openal.1:${PORTSDIR}/audio/openal-soft -_OPENAL_SI= openal.0:${PORTSDIR}/audio/openal -_OPENAL_ALUT= alut.1:${PORTSDIR}/audio/freealut - -.if exists(${LOCALBASE}/lib/libopenal.a) -_HAVE_OPENAL= si -.elif exists(${LOCALBASE}/bin/openal-info) -_HAVE_OPENAL= soft -.endif - -.if ${USE_OPENAL} == "yes" -# Be friendly. -USE_OPENAL= ${_DEFAULT_OPENAL} -.endif - -__USED_OPENAL= -_USE_OPENAL= -.for component in ${USE_OPENAL} -.if ${__USED_OPENAL:M${component}} == "" -__USED_OPENAL+= ${component} - -.if ${_OPENAL_ALL:M${component}} == "" -BROKEN= OPENAL mismatch: unknown component ${component} -.elif ${_OPENAL_ALL:M${component}} == "al" - -# Check if the user wish matches the found OpenAL system. -.if defined(WANT_OPENAL) && defined(_HAVE_OPENAL) && ${_HAVE_OPENAL} != ${WANT_OPENAL} -BROKEN= OPENAL mismatch: ${_HAVE_OPENAL} is installed, but ${WANT_OPENAL} desired -.endif # WANT_OPENAL - -.if defined(_HAVE_OPENAL) -_OPENAL_SYSTEM= ${_HAVE_OPENAL} -.elif defined(WANT_OPENAL) -_OPENAL_SYSTEM= ${WANT_OPENAL} -.else -_OPENAL_SYSTEM= ${_DEFAULT_OPENAL} -.endif # _HAVE_OPENAL - -_USE_OPENAL+= ${_OPENAL_${_OPENAL_SYSTEM:U}} - -.else # ${_OPENAL_ALL:M${component}} == "" - -.if ${_OPENAL_LIBS:M${component}} == ${component} -# Check for the system implementation to use. -.if defined(WANT_OPENAL) && ${WANT_OPENAL} != ${component} -BROKEN= OPENAL mismatch: wants to use ${component}, while you wish to use ${WANT_OPENAL} -.endif -.if defined(_OPENAL_SYSTEM) -BROKEN= OPENAL mismatch: cannot use ${component} and al together. -.endif -.if defined(_HAVE_OPENAL) && ${_HAVE_OPENAL} != ${component} -BROKEN= OPENAL mismatch: wants to use ${component}, but ${_HAVE_OPENAL} is installed -.endif - -_OPENAL_SYSTEM= ${component} - -.endif # ${_OPENAL_LIBS:M${component}} == ${component} - -_USE_OPENAL+= ${_OPENAL_${component:U}} - -.endif # ${_OPENAL_ALL:M${component}} == "" - -.endif # ${__USED_OPENAL:M${component} == "" -.endfor # component in ${USE_OPENAL} - -.for dep in ${_USE_OPENAL} -LIB_DEPENDS+= ${dep} -.endfor - -.endif # USE_OPENAL - -.if defined(USE_FAM) -DEFAULT_FAM_SYSTEM= gamin -# Currently supported FAM systems -FAM_SYSTEM_FAM= fam.0:${PORTSDIR}/devel/fam -FAM_SYSTEM_GAMIN= fam.0:${PORTSDIR}/devel/gamin - -.if exists(${LOCALBASE}/libexec/gam_server) -_HAVE_FAM_SYSTEM= gamin -.elif exists(${LOCALBASE}/bin/fam) -_HAVE_FAM_SYSTEM= fam -.endif - -.if defined(WANT_FAM_SYSTEM) -.if defined(WITH_FAM_SYSTEM) && ${WITH_FAM_SYSTEM}!=${WANT_FAM_SYSTEM} -IGNORE= wants to use ${WANT_FAM_SYSTEM} as its FAM system, while you wish to use ${WITH_FAM_SYSTEM} -.endif -FAM_SYSTEM= ${WANT_FAM_SYSTEM} -.elif defined(WITH_FAM_SYSTEM) -FAM_SYSTEM= ${WITH_FAM_SYSTEM} -.else -.if defined(_HAVE_FAM_SYSTEM) -FAM_SYSTEM= ${_HAVE_FAM_SYSTEM} -.else -FAM_SYSTEM= ${DEFAULT_FAM_SYSTEM} -.endif -.endif # WANT_FAM_SYSTEM - -.if defined(_HAVE_FAM_SYSTEM) -.if ${_HAVE_FAM_SYSTEM}!= ${FAM_SYSTEM} -BROKEN= FAM system mismatch: ${_HAVE_FAM_SYSTEM} is installed, while desired FAM system is ${FAM_SYSTEM} -.endif -.endif - -.if defined(FAM_SYSTEM_${FAM_SYSTEM:U}) -LIB_DEPENDS+= ${FAM_SYSTEM_${FAM_SYSTEM:U}} -.else -IGNORE= cannot be built with unknown FAM system: ${FAM_SYSTEM} -.endif -.endif # USE_FAM - -.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES" -SUB_FILES+= ${USE_RC_SUBR} -.endif - -.if defined(USE_RCORDER) -SUB_FILES+= ${USE_RCORDER} -.endif - -.if defined(USE_LDCONFIG) && ${USE_LDCONFIG:L} == "yes" -USE_LDCONFIG= ${PREFIX}/lib -.endif -.if defined(USE_LDCONFIG32) && ${USE_LDCONFIG32:L} == "yes" -IGNORE= has USE_LDCONFIG32 set to yes, which is not correct -.endif - -.if defined(USE_LINUX_PREFIX) && defined(USE_LDCONFIG) -# we need ${LINUXBASE}/sbin/ldconfig -USE_LINUX?= yes -.endif - -.if defined(USE_LINUX) - -. if !defined(LINUX_OSRELEASE) -LINUX_OSRELEASE!= ${ECHO_CMD} `${SYSCTL} -n compat.linux.osrelease 2>/dev/null` -. endif - -# install(1) also does a brandelf on strip, so don't strip with FreeBSD tools. -STRIP= -. if exists(${LINUXBASE}/usr/bin/strip) -STRIP_CMD= ${LINUXBASE}/usr/bin/strip -. else -STRIP_CMD= ${TRUE} -. endif - -# Allow the user to specify another linux_base version. -. if defined(OVERRIDE_LINUX_BASE_PORT) -. if ${USE_LINUX:L} == yes -USE_LINUX= ${OVERRIDE_LINUX_BASE_PORT} -. endif -. endif - -# NOTE: when you update the default linux_base version (case "yes"), -# don't forget to update the Handbook! - -. if exists(${PORTSDIR}/emulators/linux_base-${USE_LINUX}) -LINUX_BASE_PORT= ${LINUXBASE}/bin/sh:${PORTSDIR}/emulators/linux_base-${USE_LINUX} -. else -. if ${USE_LINUX:L} == "yes" -LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-f10 -. else -IGNORE= cannot be built: there is no emulators/linux_base-${USE_LINUX}, perhaps wrong use of USE_LINUX or OVERRIDE_LINUX_BASE_PORT -. endif -. endif - -RUN_DEPENDS+= ${LINUX_BASE_PORT} -.endif - -.if defined(USE_DISPLAY) -USES+= display -.endif - -PKG_IGNORE_DEPENDS?= 'this_port_does_not_exist' - -_GL_glesv2_LIB_DEPENDS= libGLESv2.so:${PORTSDIR}/grahpics/libglesv2 -_GL_egl_LIB_DEPENDS= libEGL.so:${PORTSDIR}/graphics/libEGL -_GL_gl_LIB_DEPENDS= libGL.so:${PORTSDIR}/graphics/libGL -_GL_gl_USE_XORG= glproto dri2proto -_GL_glew_LIB_DEPENDS= libGLEW.so:${PORTSDIR}/graphics/glew -_GL_glu_LIB_DEPENDS= libGLU.so:${PORTSDIR}/graphics/libGLU -_GL_glu_USE_XORG= glproto dri2proto -_GL_glw_LIB_DEPENDS= libGLw.so:${PORTSDIR}/graphics/libGLw -_GL_glut_LIB_DEPENDS= libglut.so:${PORTSDIR}/graphics/freeglut - -.if defined(USE_GL) -. if ${USE_GL:L} == "yes" -USE_GL= glu -. endif -. for _component in ${USE_GL} -. if !defined(_GL_${_component}_LIB_DEPENDS) && \ - !defined(_GL_${_component}_RUN_DEPENDS) -IGNORE= uses unknown GL component -. else -USE_XORG+= ${_GL_${_component}_USE_XORG} -BUILD_DEPENDS+= ${_GL_${_component}_BUILD_DEPENDS} -LIB_DEPENDS+= ${_GL_${_component}_LIB_DEPENDS} -RUN_DEPENDS+= ${_GL_${_component}_RUN_DEPENDS} -. endif -. endfor -.endif - -.if !defined(NO_STAGE) -.include "${PORTSDIR}/Mk/bsd.stage.mk" -.endif - -.if defined(WITH_PKGNG) -.include "${PORTSDIR}/Mk/bsd.pkgng.mk" -.endif - -.if defined(USE_LOCAL_MK) -.include "${PORTSDIR}/Mk/bsd.local.mk" -.endif - -.if defined(USE_XORG) || defined(XORG_CAT) -.include "${PORTSDIR}/Mk/bsd.xorg.mk" -.endif - -.if defined(USE_MYSQL) || defined(WANT_MYSQL_VER) || \ - defined(USE_PGSQL) || defined(WANT_PGSQL_VER) || \ - defined(USE_BDB) || defined(USE_SQLITE) || defined(USE_FIREBIRD) -.include "${PORTSDIR}/Mk/bsd.database.mk" -.endif - -.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER1) -.include "${PORTSDIR}/Mk/bsd.gstreamer.mk" -.endif - -.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART) -.include "${PORTSDIR}/Mk/bsd.efl.mk" -.endif - -.if defined(USE_JAVA) -.include "${PORTSDIR}/Mk/bsd.java.mk" -.endif - -.if defined(USE_LINUX_RPM) -.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk" -.endif - -.if defined(USE_LINUX_APPS) -.include "${PORTSDIR}/Mk/bsd.linux-apps.mk" -.endif - -.if defined(USE_QT4) -.include "${PORTSDIR}/Mk/bsd.qt.mk" -.endif - -.if defined(USE_SCONS) -.include "${PORTSDIR}/Mk/bsd.scons.mk" -.endif - -.if defined(USE_SDL) || defined(WANT_SDL) -.include "${PORTSDIR}/Mk/bsd.sdl.mk" -.endif - -.if defined(USE_PHP) -.include "${PORTSDIR}/Mk/bsd.php.mk" -.endif - -.if defined(USE_PYTHON) -.include "${PORTSDIR}/Mk/bsd.python.mk" -.endif - -.if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TK) || defined(USE_TK_BUILD) -.include "${PORTSDIR}/Mk/bsd.tcl.mk" -.endif - -.if defined(USE_LUA) || defined(USE_LUA_NOT) -.include "${PORTSDIR}/Mk/bsd.lua.mk" -.endif - -.if defined(USE_WX) || defined(USE_WX_NOT) -.include "${PORTSDIR}/Mk/bsd.wx.mk" -.endif - -.if defined(USE_APACHE) || defined(USE_APACHE_BUILD) || defined(USE_APACHE_RUN) -.include "${PORTSDIR}/Mk/bsd.apache.mk" -.endif - -.if defined(USE_AUTOTOOLS) -.include "${PORTSDIR}/Mk/bsd.autotools.mk" -.endif - -.if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL) -.include "${PORTSDIR}/Mk/bsd.fpc.mk" -.endif - -.if defined(WANT_GECKO) || defined(USE_GECKO) -.include "${PORTSDIR}/Mk/bsd.gecko.mk" -.endif - -.if defined(WANT_GNOME) || defined(USE_GNOME) -.include "${PORTSDIR}/Mk/bsd.gnome.mk" -.endif - -.if defined(USE_MATE) -.include "${PORTSDIR}/Mk/bsd.mate.mk" -.endif - -.if defined(USE_XFCE) -.include "${PORTSDIR}/Mk/bsd.xfce.mk" -.endif - -.if defined(USE_KDE4) -.include "${PORTSDIR}/Mk/bsd.kde4.mk" -.endif - -.if exists(${PORTSDIR}/Makefile.inc) -.include "${PORTSDIR}/Makefile.inc" -USE_SUBMAKE= yes -.endif - -# Loading features -.for f in ${_USES_POST} -_f=${f:C/\:.*//g} -.if ${_f} != ${f} -${_f}_ARGS:= ${f:C/^[^\:]*\://g} -.endif -.include "${USESDIR}/${_f}.mk" -.endfor - -.if defined(USE_XORG) -# Add explicit X options to avoid problems with false positives in configure -.if defined(GNU_CONFIGURE) -CONFIGURE_ARGS+=--x-libraries=${LOCALBASE}/lib --x-includes=${LOCALBASE}/include -.endif -.endif - -# Set the default for the installation of Postscript(TM)- -# compatible functionality. -.if !defined(USE_GHOSTSCRIPT) -. if defined(USE_GHOSTSCRIPT_BUILD) -_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT_BUILD} -. elif defined(USE_GHOSTSCRIPT_RUN) -_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT_RUN} -. endif -.else -_USE_GHOSTSCRIPT= ${USE_GHOSTSCRIPT} -.endif - -.if defined(WITH_GHOSTSCRIPT_VER) && !empty(WITH_GHOSTSCRIPT_VER:M[789]) -_USE_GHOSTSCRIPT_DEFAULT_VER= ${WITH_GHOSTSCRIPT_VER} -.else -_USE_GHOSTSCRIPT_DEFAULT_VER= 9 -.endif - -.if defined(_USE_GHOSTSCRIPT) -. if !defined(WITHOUT_X11) -_USE_GHOSTSCRIPT_PKGNAME_SUFFIX= -. else -_USE_GHOSTSCRIPT_PKGNAME_SUFFIX=-nox11 -. endif -. if !empty(_USE_GHOSTSCRIPT:M[789]) -_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT:M[789]} -. else -_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER} -. endif -.else -_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER} -.endif - -# Sanity check -.if defined(_USE_GHOSTSCRIPT) && defined(WITH_GHOSTSCRIPT_VER) -. if empty(WITH_GHOSTSCRIPT_VER:M[789]) -. error You set an invalid value "${WITH_GHOSTSCRIPT_VER}" in WITH_GHOSTSCRIPT_VER. Abort. -. elif ${_USE_GHOSTSCRIPT_VER} != ${WITH_GHOSTSCRIPT_VER} -. error You set WITH_GHOSTSCRIPT_VER as ${WITH_GHOSTSCRIPT_VER} but ${PKGNAME} requires print/ghostscript${_USE_GHOSTSCRIPT_VER}. Abort. -. endif -.endif - -GHOSTSCRIPT_PORT?= print/ghostscript${_USE_GHOSTSCRIPT_VER}${_USE_GHOSTSCRIPT_PKGNAME_SUFFIX} - -# Set up the ghostscript dependencies. -.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_BUILD) -BUILD_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT} -.endif -.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_RUN) -RUN_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT} -.endif - -# Macro for doing in-place file editing using regexps -REINPLACE_ARGS?= -i.bak -REINPLACE_CMD?= ${SED} ${REINPLACE_ARGS} - -# Names of cookies used to skip already completed stages -EXTRACT_COOKIE?= ${WRKDIR}/.extract_done.${PORTNAME}.${PREFIX:S/\//_/g} -CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done.${PORTNAME}.${PREFIX:S/\//_/g} -INSTALL_COOKIE?= ${WRKDIR}/.install_done.${PORTNAME}.${PREFIX:S/\//_/g} -BUILD_COOKIE?= ${WRKDIR}/.build_done.${PORTNAME}.${PREFIX:S/\//_/g} -PATCH_COOKIE?= ${WRKDIR}/.patch_done.${PORTNAME}.${PREFIX:S/\//_/g} -PACKAGE_COOKIE?= ${WRKDIR}/.package_done.${PORTNAME}.${PREFIX:S/\//_/g} -STAGE_COOKIE?= ${WRKDIR}/.stage_done.${PORTNAME}.${PREFIX:S/\//_/g} - -# How to do nothing. Override if you, for some strange reason, would rather -# do something. -DO_NADA?= ${TRUE} - -# Use this as the first operand to always build dependency. -NONEXISTENT?= /nonexistent - -CHECKSUM_ALGORITHMS?= sha256 - -DISTINFO_FILE?= ${MASTERDIR}/distinfo - -MAKE_FLAGS?= -f -MAKEFILE?= Makefile -MAKE_CMD?= /usr/bin/make -MAKE_ENV+= PREFIX=${PREFIX} \ - LOCALBASE=${LOCALBASE} \ - LIBDIR="${LIBDIR}" \ - CC="${CC}" CFLAGS="${CFLAGS}" \ - CPP="${CPP}" CPPFLAGS="${CPPFLAGS}" \ - LDFLAGS="${LDFLAGS}" \ - CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \ - MANPREFIX="${MANPREFIX}" - -# Add -fno-strict-aliasing to CFLAGS with optimization level -O2 or higher. -# gcc 4.x enable strict aliasing optimization with -O2 which is known to break -# a lot of ports. -.if !defined(WITHOUT_NO_STRICT_ALIASING) -.if ${CC} != "icc" -.if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing) -CFLAGS+= -fno-strict-aliasing -.endif -.endif -.endif - -.if defined(USE_CSTD) -CFLAGS:= ${CFLAGS:N-std=*} -std=${USE_CSTD} -.endif - -.if defined(USE_CXXSTD) -CXXFLAGS:= ${CXXFLAGS:N-std=*} -std=${USE_CXXSTD} -.endif - -# Multiple make jobs support -.if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE) -_MAKE_JOBS= # -MAKE_JOBS_NUMBER= 1 -.else -.if defined(MAKE_JOBS_NUMBER) -_MAKE_JOBS_NUMBER:= ${MAKE_JOBS_NUMBER} -.else -_MAKE_JOBS_NUMBER!= ${SYSCTL} -n kern.smp.cpus -.endif -.if defined(MAKE_JOBS_NUMBER_LIMIT) && ( ${MAKE_JOBS_NUMBER_LIMIT} < ${_MAKE_JOBS_NUMBER} ) -MAKE_JOBS_NUMBER= ${MAKE_JOBS_NUMBER_LIMIT} -.else -MAKE_JOBS_NUMBER= ${_MAKE_JOBS_NUMBER} -.endif -_MAKE_JOBS?= -j${MAKE_JOBS_NUMBER} -BUILD_FAIL_MESSAGE+= Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer. -.endif - -# ccache support -# Support NO_CCACHE for common setups, require WITH_CCACHE_BUILD, and -# don't use if ccache already set in CC -.if !defined(NO_CCACHE) && defined(WITH_CCACHE_BUILD) && !${CC:M*ccache*} && \ - !defined(NO_BUILD) && !defined(NOCCACHE) -# Avoid depends loops between pkg and ccache -. if !${.CURDIR:M*/devel/ccache} && !${.CURDIR:M*/ports-mgmt/pkg} -BUILD_DEPENDS+= ${LOCALBASE}/bin/ccache:${PORTSDIR}/devel/ccache -. endif - -_CCACHE_PATH= ${LOCALBASE}/libexec/ccache - -# Prepend the ccache dir into the PATH and setup ccache env -PATH:= ${_CCACHE_PATH}:${PATH} -.if !${MAKE_ENV:MPATH=*} && !${CONFIGURE_ENV:MPATH=*} -MAKE_ENV+= PATH=${PATH} -CONFIGURE_ENV+= PATH=${PATH} -.endif - -. if defined(CCACHE_DIR) -MAKE_ENV+= CCACHE_DIR="${CCACHE_DIR}" -CONFIGURE_ENV+= CCACHE_DIR="${CCACHE_DIR}" -. endif -.endif - -PTHREAD_CFLAGS?= -PTHREAD_LIBS?= -pthread - -FETCH_ENV?= SSL_NO_VERIFY_PEER=1 SSL_NO_VERIFY_HOSTNAME=1 -FETCH_BINARY?= /usr/bin/fetch -FETCH_ARGS?= -AFpr -FETCH_REGET?= 1 -.if !defined(DISABLE_SIZE) -FETCH_BEFORE_ARGS+= $${CKSIZE:+-S $$CKSIZE} -.endif -FETCH_CMD?= ${FETCH_BINARY} ${FETCH_ARGS} - -.if defined(RANDOMIZE_MASTER_SITES) -.if exists(/usr/games/random) -RANDOM_CMD?= /usr/games/random -RANDOM_ARGS?= "-w -f -" -_RANDOMIZE_SITES= " |${RANDOM_CMD} ${RANDOM_ARGS}" -.endif -.endif - -TOUCH?= /usr/bin/touch -TOUCH_FLAGS?= -f - -DISTORIG?= .bak.orig -PATCH?= /usr/bin/patch -PATCH_STRIP?= -p0 -PATCH_DIST_STRIP?= -p0 -.if defined(PATCH_DEBUG) -PATCH_DEBUG_TMP= yes -PATCH_ARGS?= -d ${PATCH_WRKSRC} -E ${PATCH_STRIP} -PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} -E ${PATCH_DIST_STRIP} -.else -PATCH_DEBUG_TMP= no -PATCH_ARGS?= -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_STRIP} -PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP} -.endif -.if defined(BATCH) -PATCH_ARGS+= --batch -PATCH_DIST_ARGS+= --batch -.endif - -# Prevent breakage with VERSION_CONTROL=numbered -PATCH_ARGS+= -V simple - -.if defined(PATCH_CHECK_ONLY) -PATCH_ARGS+= -C -PATCH_DIST_ARGS+= -C -.endif - -.if ${PATCH} == "/usr/bin/patch" -PATCH_ARGS+= --suffix .orig -PATCH_DIST_ARGS+= --suffix .orig -.endif - -TAR?= /usr/bin/tar - -# EXTRACT_SUFX is defined in .pre.mk section -.if defined(USE_LHA) -EXTRACT_CMD?= ${LHA_CMD} -EXTRACT_BEFORE_ARGS?= xfqw=${WRKDIR} -EXTRACT_AFTER_ARGS?= -.elif defined(USE_ZIP) -EXTRACT_CMD?= ${UNZIP_CMD} -EXTRACT_BEFORE_ARGS?= -qo -EXTRACT_AFTER_ARGS?= -d ${WRKDIR} -.elif defined(USE_MAKESELF) -EXTRACT_CMD?= ${UNMAKESELF_CMD} -EXTRACT_BEFORE_ARGS?= -EXTRACT_AFTER_ARGS?= -.else -EXTRACT_CMD?= ${TAR} -EXTRACT_BEFORE_ARGS?= -xf -.if defined(EXTRACT_PRESERVE_OWNERSHIP) -EXTRACT_AFTER_ARGS?= -.else -EXTRACT_AFTER_ARGS?= --no-same-owner --no-same-permissions -.endif -.endif - -# Figure out where the local mtree file is -.if !defined(MTREE_FILE) && !defined(NO_MTREE) -.if ${PREFIX} == /usr -MTREE_FILE= /etc/mtree/BSD.usr.dist -.else -MTREE_FILE= ${PORTSDIR}/Templates/BSD.local.dist -.endif -MTREE_FILE_DEFAULT=yes -.endif -MTREE_CMD?= /usr/sbin/mtree -MTREE_ARGS?= -U ${MTREE_FOLLOWS_SYMLINKS} -f ${MTREE_FILE} -d -e -p - -READLINK_CMD?= /usr/bin/readlink - -# Determine whether or not we can use rootly owner/group functions. -.if ${UID} == 0 -_BINOWNGRP= -o ${BINOWN} -g ${BINGRP} -_SHROWNGRP= -o ${SHAREOWN} -g ${SHAREGRP} -_MANOWNGRP= -o ${MANOWN} -g ${MANGRP} -.else -_BINOWNGRP= -_SHROWNGRP= -_MANOWNGRP= -.endif - -# A few aliases for *-install targets -INSTALL_PROGRAM= \ - ${INSTALL} ${COPY} ${STRIP} ${_BINOWNGRP} -m ${BINMODE} -INSTALL_KLD= \ - ${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE} -INSTALL_LIB= \ - ${INSTALL} ${COPY} ${STRIP} ${_SHROWNGRP} -m ${SHAREMODE} -INSTALL_SCRIPT= \ - ${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE} -INSTALL_DATA= \ - ${INSTALL} ${COPY} ${_SHROWNGRP} -m ${SHAREMODE} -INSTALL_MAN= \ - ${INSTALL} ${COPY} ${_MANOWNGRP} -m ${MANMODE} - -INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ - BSD_INSTALL_LIB="${INSTALL_LIB}" \ - BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ - BSD_INSTALL_DATA="${INSTALL_DATA}" \ - BSD_INSTALL_MAN="${INSTALL_MAN}" -MAKE_ENV+= ${INSTALL_MACROS} -SCRIPTS_ENV+= ${INSTALL_MACROS} - -# Macro for copying entire directory tree with correct permissions -.if ${UID} == 0 -COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ - 2>&1) && \ - ${CHOWN} -Rh ${BINOWN}:${BINGRP} $$1 && \ - ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \ - ${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' -- -COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ - 2>&1) && \ - ${CHOWN} -Rh ${SHAREOWN}:${SHAREGRP} $$1 && \ - ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \ - ${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' -- -.else -COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ - 2>&1) && \ - ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \ - ${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' -- -COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ - 2>&1) && \ - ${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \ - ${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' -- -.endif - -# The user can override the NO_PACKAGE by specifying this from -# the make command line -.if defined(FORCE_PACKAGE) -.undef NO_PACKAGE -.endif - -DESCR?= ${PKGDIR}/pkg-descr -PLIST?= ${PKGDIR}/pkg-plist -PKGHELP?= ${PKGDIR}/pkg-help -PKGINSTALL?= ${PKGDIR}/pkg-install -PKGDEINSTALL?= ${PKGDIR}/pkg-deinstall -PKGREQ?= ${PKGDIR}/pkg-req -PKGMESSAGE?= ${PKGDIR}/pkg-message - -TMPPLIST?= ${WRKDIR}/.PLIST.mktmp -TMPPLIST_SORT?= ${WRKDIR}/.PLIST.mktmp.sorted -TMPGUCMD?= ${WRKDIR}/.PLIST.gucmd - -.if !defined(PKG_ARGS) -PKG_ARGS= -v -c -${COMMENT:Q} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`cd ${.CURDIR} && ${MAKE} actual-package-depends | ${GREP} -v -E ${PKG_IGNORE_DEPENDS} | ${SORT} -u -t : -k 2`" ${EXTRA_PKG_ARGS} $${_LATE_PKG_ARGS} -.if !defined(NO_MTREE) -PKG_ARGS+= -m ${MTREE_FILE} -.endif -.if defined(PKGORIGIN) -PKG_ARGS+= -o ${PKGORIGIN} -.endif -.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS) -PKG_ARGS+= -C "${CONFLICTS}" -.endif -.if defined(CONFLICTS_INSTALL) && !defined(DISABLE_CONFLICTS) -PKG_ARGS+= -C "${CONFLICTS_INSTALL}" -.endif -.endif -.if defined(PKG_NOCOMPRESS) -PKG_SUFX?= .tar -.else -.if defined(WITH_PKGNG) -PKG_SUFX?= .txz -.else -PKG_SUFX?= .tbz -.endif -.endif -# where pkg_add records its dirty deeds. -PKG_DBDIR?= /var/db/pkg - -ALL_TARGET?= all -INSTALL_TARGET?= install -INSTALL_TARGET+= ${LATE_INSTALL_ARGS} - -# Integrate with the license auditing framework -.if !defined (DISABLE_LICENSES) -.include "${PORTSDIR}/Mk/bsd.licenses.mk" -.endif - -# Popular master sites -.include "${PORTSDIR}/Mk/bsd.sites.mk" - -# Empty declaration to avoid "variable MASTER_SITES recursive" error -MASTER_SITES?= -PATCH_SITES?= -_MASTER_SITES_DEFAULT?= -_PATCH_SITES_DEFAULT?= - -# Feed internal _{MASTER,PATCH}_SITES_n where n is a group designation -# as per grouping rules (:something) -# Organize _{MASTER,PATCH}_SITES_{DEFAULT,[^/:]+} according to grouping -# rules (:something) -.for _S in ${MASTER_SITES} -_S_TEMP= ${_S:S/^${_S:C@/?:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -_G_TEMP= ${_group} -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default -check-makevars:: - @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" - @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITES" - @${FALSE} -. endif -_MASTER_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endfor -. else -_MASTER_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endif -.endfor -.for _S in ${PATCH_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -_G_TEMP= ${_group} -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default -check-makevars:: - @${ECHO_MSG} "The words all, ALL and default are reserved and cannot be" - @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITES" - @${FALSE} -. endif -_PATCH_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endfor -. else -_PATCH_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endif -.endfor - -# Feed internal _{MASTER,PATCH}_SITE_SUBDIR_n where n is a group designation -# as per grouping rules (:something) -# Organize _{MASTER,PATCH}_SITE_SUBDIR_{DEFAULT,[^/:]+} according to grouping -# rules (:something) -.for _S in ${MASTER_SITE_SUBDIR} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -_G_TEMP= ${_group} -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default -check-makevars:: - @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" - @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITE_SUBDIR" - @${FALSE} -. endif -. if defined(_MASTER_SITES_${_group}) -_MASTER_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endfor -. else -. if defined(_MASTER_SITES_DEFAULT) -_MASTER_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endif -.endfor -.for _S in ${PATCH_SITE_SUBDIR} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -_G_TEMP= ${_group} -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default -check-makevars:: - @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" - @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITE_SUBDIR" - @${FALSE} -. endif -. if defined(_PATCH_SITES_${_group}) -_PATCH_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endfor -. else -. if defined(_PATCH_SITES_DEFAULT) -_PATCH_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endif -.endfor - -# Substitute subdirectory names -# XXX simpler/faster solution but not the best space wise, suggestions please -.for _S in ${MASTER_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -. if !defined(_MASTER_SITE_SUBDIR_${_group}) -MASTER_SITES_TMP= ${_MASTER_SITES_${_group}:S^%SUBDIR%/^^} -. else -_S_TEMP_TEMP= ${_MASTER_SITES_${_group}:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -MASTER_SITES_TMP= ${_MASTER_SITES_${_group}} -. else -MASTER_SITES_TMP= -. for site in ${_MASTER_SITES_${_group}} -_S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -MASTER_SITES_TMP+= ${site} -. else -. for dir in ${_MASTER_SITE_SUBDIR_${_group}} -MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -. endif -_MASTER_SITES_${_group}:= ${MASTER_SITES_TMP} -. endfor -. endif -.endfor -.if defined(_MASTER_SITE_SUBDIR_DEFAULT) -_S_TEMP= ${_MASTER_SITES_DEFAULT:M*%SUBDIR%/*} -. if empty(_S_TEMP) -MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT} -. else -MASTER_SITES_TMP= -. for site in ${_MASTER_SITES_DEFAULT} -_S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -MASTER_SITES_TMP+= ${site} -. else -. for dir in ${_MASTER_SITE_SUBDIR_DEFAULT} -MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -.else -MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT:S^%SUBDIR%/^^} -.endif -_MASTER_SITES_DEFAULT:= ${MASTER_SITES_TMP} -MASTER_SITES_TMP= -.for _S in ${PATCH_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -. if !defined(_PATCH_SITE_SUBDIR_${_group}) -PATCH_SITES_TMP= ${_PATCH_SITES_${_group}:S^%SUBDIR%/^^} -. else -_S_TEMP_TEMP= ${_PATCH_SITES_${_group}:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -PATCH_SITES_TMP= ${_PATCH_SITES_${_group}} -. else -PATCH_SITES_TMP= -. for site in ${_PATCH_SITES_${_group}} -_S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -PATCH_SITES_TMP+= ${site} -. else -. for dir in ${_PATCH_SITE_SUBDIR_${_group}} -PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -. endif -_PATCH_SITES_${_group}:= ${PATCH_SITES_TMP} -. endfor -. endif -.endfor -.if defined(_PATCH_SITE_SUBDIR_DEFAULT) -_S_TEMP= ${_PATCH_SITES_DEFAULT:M*%SUBDIR%/*} -. if empty(_S_TEMP) -PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT} -. else -PATCH_SITES_TMP= -. for site in ${_PATCH_SITES_DEFAULT} -_S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -PATCH_SITES_TMP+= ${site} -. else -. for dir in ${_PATCH_SITE_SUBDIR_DEFAULT} -PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -.else -PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT:S^%SUBDIR%/^^} -.endif -_PATCH_SITES_DEFAULT:= ${PATCH_SITES_TMP} -PATCH_SITES_TMP= - -# The primary backup site. -MASTER_SITE_BACKUP?= \ - ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ -MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:S^\${DIST_SUBDIR}/^^} - -# If the user has MASTER_SITE_FREEBSD set, go to the FreeBSD repository -# for everything, but don't search it twice by appending it to the end. -.if defined(MASTER_SITE_FREEBSD) -_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_BACKUP} -_MASTER_SITE_BACKUP:= # empty -.else -_MASTER_SITE_OVERRIDE= ${MASTER_SITE_OVERRIDE} -_MASTER_SITE_BACKUP= ${MASTER_SITE_BACKUP} -.endif - -# Search CDROM first if mounted, symlink instead of copy if -# FETCH_SYMLINK_DISTFILES is set -.for MOUNTPT in ${CD_MOUNTPTS} -.if exists(${MOUNTPT}/ports/distfiles) -_MASTER_SITE_OVERRIDE:= file:${MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${_MASTER_SITE_OVERRIDE} -.if defined(FETCH_SYMLINK_DISTFILES) -FETCH_BEFORE_ARGS+= -l -.endif -.endif -.endfor - -NOFETCHFILES?= - -# Organize DISTFILES, PATCHFILES, _MASTER_SITES_ALL, _PATCH_SITES_ALL -# according to grouping rules (:something) -DISTFILES?= ${DISTNAME}${EXTRACT_SUFX} -_MASTER_SITES_ALL= ${_MASTER_SITES_DEFAULT} -_PATCH_SITES_ALL= ${_PATCH_SITES_DEFAULT} -_G_TEMP= DEFAULT -.for _D in ${DISTFILES} -_D_TEMP= ${_D:S/^${_D:C/:[^:]+$//}//} -. if !empty(_D_TEMP) -. for _group in ${_D_TEMP:S/^://:S/,/ /g} -. if !defined(_MASTER_SITES_${_group}) -_G_TEMP_TEMP= ${_G_TEMP:M/${_group}/} -. if empty(_G_TEMP_TEMP) -_G_TEMP+= ${_group} -_MASTER_SITES_ALL+= ${_MASTER_SITES_${_group}} -. endif -. endif -. endfor -_DISTFILES+= ${_D:C/:[^:]+$//} -. else -_DISTFILES+= ${_D} -. endif -.endfor -_G_TEMP= DEFAULT -.for _P in ${PATCHFILES} -_P_TEMP= ${_P:C/:[^-:][^:]*$//} -_P_groups= ${_P:S/^${_P:C/:[^:]+$//}//:S/^://} -_P_file= ${_P_TEMP:C/:-[^:]+$//} -_P_strip= ${_P_TEMP:S/^${_P_TEMP:C/:-[^:]*$//}//:S/^://} -. if !empty(_P_groups) -. for _group in ${_P_groups:S/,/ /g} -. if !defined(_PATCH_SITES_${_group}) -_G_TEMP_TEMP= ${_G_TEMP:M/${_group}/} -. if empty(_G_TEMP_TEMP) -_G_TEMP+= ${_group} -_PATCH_SITES_ALL+= ${_PATCH_SITES_${_group}} -. endif -. endif -. endfor -. endif -_PATCHFILES:= ${_PATCHFILES} ${_P_file} -. if !empty(_P_strip) -_PATCH_DIST_STRIP_CASES:= ${_PATCH_DIST_STRIP_CASES} ("${_P_file}") printf %s "${_P_strip}" ;; -. endif -.endfor -_P_groups= -_P_file= -_P_strip= -_G_TEMP= -_G_TEMP_TEMP= -ALLFILES?= ${_DISTFILES} ${_PATCHFILES} - -# -# Sort the master site list according to the patterns in MASTER_SORT -# -MASTER_SORT?= -MASTER_SORT_REGEX?= -MASTER_SORT_REGEX+= ${MASTER_SORT:S|.|\\.|g:S|^|://[^/]*|:S|$|/|} - -MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S|\\|\\\\|g}"; } -.for srt in ${MASTER_SORT_REGEX} -MASTER_SORT_AWK+= /${srt:S|/|\\/|g}/ { good["${srt:S|\\|\\\\|g}"] = good["${srt:S|\\|\\\\|g}"] " " $$0 ; next; } -.endfor -MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; } - -SORTED_MASTER_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} master-sites-DEFAULT -SORTED_PATCH_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} patch-sites-DEFAULT -SORTED_MASTER_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} master-sites-ALL -SORTED_PATCH_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} patch-sites-ALL - -# has similar effect to old targets, i.e., access only {MASTER,PATCH}_SITES, not working with the new _n variables -master-sites-DEFAULT: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} -patch-sites-DEFAULT: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} - -# -# Sort the master site list according to the patterns in MASTER_SORT -# according to grouping rules (:something) -# -# for use in the fetch targets -.for _S in ${MASTER_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/^://:S/,/ /g} -. if !target(master-sites-${_group}) -SORTED_MASTER_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} master-sites-${_group} -master-sites-${_group}: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} -. endif -. endfor -. endif -.endfor -.for _S in ${PATCH_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/^://:S/,/ /g} -. if !target(patch-sites-${_group}) -SORTED_PATCH_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} patch-sites-${_group} -patch-sites-${_group}: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} -. endif -. endfor -. endif -.endfor - -# -# Hackery to enable simple fetch targets with several dynamic MASTER_SITES -# -_MASTER_SITES_ENV= _MASTER_SITES_DEFAULT="${_MASTER_SITES_DEFAULT}" -.for _F in ${DISTFILES} -_F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://} -. if !empty(_F_TEMP) -. for _group in ${_F_TEMP:S/,/ /g} -. if defined(_MASTER_SITES_${_group}) -_MASTER_SITES_ENV+= _MASTER_SITES_${_group}="${_MASTER_SITES_${_group}}" -. endif -. endfor -. endif -.endfor -_PATCH_SITES_ENV= _PATCH_SITES_DEFAULT="${_PATCH_SITES_DEFAULT}" -.for _F in ${PATCHFILES} -_F_TEMP= ${_F:S/^${_F:C/:[^-:][^:]*$//}//:S/^://} -. if !empty(_F_TEMP) -. for _group in ${_F_TEMP:S/,/ /g} -. if defined(_PATCH_SITES_${_group}) -_PATCH_SITES_ENV+= _PATCH_SITES_${_group}="${_PATCH_SITES_${_group}}" -. endif -. endfor -. endif -.endfor - -master-sites-ALL: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} -patch-sites-ALL: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} - -# synonyms, mnemonics -master-sites-all: master-sites-ALL -patch-sites-all: patch-sites-ALL -master-sites-default: master-sites-DEFAULT -patch-sites-default: patch-sites-DEFAULT - -# compatibility with old behavior -master-sites: master-sites-DEFAULT -patch-sites: patch-sites-DEFAULT - -.if defined(IGNOREFILES) -.if !defined(CKSUMFILES) -. for _f in ${ALLFILES} -. if ! ${IGNOREFILES:M${_f}} -CKSUMFILES+= ${_f} -. endif -. endfor -. undef _f -.endif -.else -CKSUMFILES= ${ALLFILES} -.endif - -# List of all files, with ${DIST_SUBDIR} in front. Used for checksum. -.if defined(DIST_SUBDIR) -.if defined(CKSUMFILES) && ${CKSUMFILES}!="" -_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//} -.endif -.if defined(IGNOREFILES) && ${IGNOREFILES}!="" -_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//} -.endif -.else -_CKSUMFILES?= ${CKSUMFILES} -_IGNOREFILES?= ${IGNOREFILES} -.endif - -# This is what is actually going to be extracted, and is overridable -# by user. -EXTRACT_ONLY?= ${_DISTFILES} - -.if !target(maintainer) -maintainer: - @${ECHO_CMD} "${MAINTAINER}" -.endif - -.if !target(check-makefile) -check-makefile:: - @${DO_NADA} -.endif - -.if !defined(CATEGORIES) -check-categories: - @${ECHO_MSG} "${PKGNAME}: Makefile error: CATEGORIES is mandatory." - @${FALSE} -.else - -VALID_CATEGORIES+= accessibility afterstep arabic archivers astro audio \ - benchmarks biology cad chinese comms converters databases \ - deskutils devel docs dns editors elisp emulators enlightenment finance french ftp \ - games geography german gnome gnustep graphics hamradio haskell hebrew hungarian \ - ipv6 irc japanese java kde kld korean lang linux lisp \ - mail mate math mbone misc multimedia net net-im net-mgmt net-p2p news \ - palm parallel pear perl5 plan9 polish portuguese ports-mgmt \ - print python ruby rubygems russian \ - scheme science security shells spanish sysutils \ - tcl textproc tk \ - ukrainian vietnamese windowmaker www \ - x11 x11-clocks x11-drivers x11-fm x11-fonts x11-servers x11-themes \ - x11-toolkits x11-wm xfce zope - -check-categories: -.for cat in ${CATEGORIES} -. if empty(VALID_CATEGORIES:M${cat}) - @${ECHO_MSG} "${PKGNAME}: Makefile error: category ${cat} not in list of valid categories."; \ - ${FALSE}; -. endif -.endfor -.endif - -.if !target(check-makevars) -check-makevars:: - @${DO_NADA} -.endif - -.if !target(check-depends) -check-depends: - @${DO_NADA} -.endif - -PKGREPOSITORYSUBDIR?= All -PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR} -.if exists(${PACKAGES}) -PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX} -.else -PKGFILE?= ${.CURDIR}/${PKGNAME}${PKG_SUFX} -.endif - -# The "latest version" link -- ${PKGNAME} minus everthing after the last '-' -PKGLATESTREPOSITORY?= ${PACKAGES}/Latest -PKGBASE?= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX} -LATEST_LINK?= ${PKGBASE} -PKGLATESTFILE= ${PKGLATESTREPOSITORY}/${LATEST_LINK}${PKG_SUFX} - -CONFIGURE_SCRIPT?= configure -CONFIGURE_TARGET?= ${ARCH}-portbld-freebsd${OSREL} -CONFIGURE_TARGET:= ${CONFIGURE_TARGET:S/--build=//} -CONFIGURE_LOG?= config.log - -# A default message to print if do-configure fails. -CONFIGURE_FAIL_MESSAGE?= "Please report the problem to ${MAINTAINER} [maintainer] and attach the \"${CONFIGURE_WRKSRC}/${CONFIGURE_LOG}\" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. a ${PKG_INFO} -Ea)." - -.if defined(GNU_CONFIGURE) -# Maximum command line length -.if !defined(CONFIGURE_MAX_CMD_LEN) -CONFIGURE_MAX_CMD_LEN!= ${SYSCTL} -n kern.argmax -.endif -GNU_CONFIGURE_PREFIX?= ${PREFIX} -CONFIG_SITE?= ${PORTSDIR}/Templates/config.site -CONFIGURE_ARGS+= --prefix=${GNU_CONFIGURE_PREFIX} $${_LATE_CONFIGURE_ARGS} -CONFIGURE_ENV+= CONFIG_SITE=${CONFIG_SITE} lt_cv_sys_max_cmd_len=${CONFIGURE_MAX_CMD_LEN} -HAS_CONFIGURE= yes - -SET_LATE_CONFIGURE_ARGS= \ - _LATE_CONFIGURE_ARGS="" ; \ - if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--mandir'`" ]; then \ - _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --mandir=${MANPREFIX}/man" ; \ - fi ; \ - if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--infodir'`" ]; then \ - _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --infodir=${PREFIX}/${INFO_PATH}/${INFO_SUBDIR}" ; \ - fi ; \ - if [ -z "`./${CONFIGURE_SCRIPT} --version 2>&1 | ${EGREP} -i '(autoconf.*2\.13|Unrecognized option)'`" ]; then \ - _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --build=${CONFIGURE_TARGET}" ; \ - else \ - _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} ${CONFIGURE_TARGET}" ; \ - fi ; -.endif - -# Passed to most of script invocations -SCRIPTS_ENV+= CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \ - WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \ - SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \ - PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} - -.if defined(BATCH) -SCRIPTS_ENV+= BATCH=yes -.endif - -.if ${PREFIX} == /usr -MANPREFIX?= /usr/share -.else -MANPREFIX?= ${PREFIX} -.endif - -MANDIRS+= ${MANPREFIX}/man -.for sect in 1 2 3 4 5 6 7 8 9 -MAN${sect}PREFIX?= ${MANPREFIX} -.endfor -MANLPREFIX?= ${MANPREFIX} -MANNPREFIX?= ${MANPREFIX} - -MANLANG?= "" # english only by default - -.if !defined(NO_MANCOMPRESS) -MANEXT= .gz -.endif - -.if (defined(MLINKS) || defined(_MLINKS_PREPEND)) && !defined(_MLINKS) - -.if defined(.PARSEDIR) -_MLINKS= ${_MLINKS_PREPEND} \ - ${MANLANG:S,^,man/,:S,/"",,:@m@${MLINKS:@p@${MAN${p:E:C/(.).*/\1/g}PREFIX}/$m/man${p:E:C/(.).*/\1/g}/$p${MANEXT}@}@} -.else -__pmlinks!= ${ECHO_CMD} '${MLINKS:S/ / /}' | ${AWK} \ - '{ if (NF % 2 != 0) { print "broken"; exit; } \ - for (i=1; i<=NF; i++) { \ - if ($$i ~ /^-$$/ && i != 1 && i % 2 != 0) \ - { $$i = $$(i-2); printf " " $$i " "; } \ - else if ($$i ~ /^[^ ]+\.[1-9ln][^. ]*$$/ || $$i ~ /^\//) \ - printf " " $$i " "; \ - else \ - { print "broken"; exit; } \ - } \ - }' | ${SED} -e 's \([^/ ][^ ]*\.\(.\)[^. ]*\) $${MAN\2PREFIX}/$$$$$$$${__lang}/man\2/\1${MANEXT}g' -e 's/ //g' -e 's/MANlPREFIX/MANLPREFIX/g' -e 's/MANnPREFIX/MANNPREFIX/g' -.if ${__pmlinks:Mbroken} == "broken" -check-makevars:: - @${ECHO_MSG} "${PKGNAME}: Makefile error: unable to parse MLINKS." - @${FALSE} -.endif -_MLINKS= ${_MLINKS_PREPEND} - -.for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%} -.for ___pmlinks in ${__pmlinks} -.for __lang in ${lang} -_MLINKS+= ${___pmlinks:S// /g} -.endfor -.endfor -.endfor -.endif -.endif -_COUNT=0 -.for ___tpmlinks in ${_MLINKS} -.if ${_COUNT} == "1" -_TMLINKS+= ${___tpmlinks} -_COUNT=0 -.else -_COUNT=1 -.endif -.endfor - -.for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%} - -.for sect in 1 2 3 4 5 6 7 8 9 L N -# MAN${sect} is for man pages installed for all languages in MANLANG for a given -# section. -.if defined(MAN${sect}) -_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%} -.endif - -# Language specific MAN${sect} variables are for man pages installed in that -# language, but not necessarily all languages in MANLANG. -.if defined(MAN${sect}_${manlang:S%^man/%%:U}) -_MANPAGES+= ${MAN${sect}_${manlang:S%^man/%%:U}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%} -.endif - -.endfor - -.endfor - -# Special case for English, since it is defined with "" in MANLANG rather than -# a language name and does not have man pages installed in a lang subdirectory -# of MAN${sect}PREFIX. -.for sect in 1 2 3 4 5 6 7 8 9 L N -.if defined(MAN${sect}_EN) -_MANPAGES+= ${MAN${sect}_EN:S%^%${MAN${sect}PREFIX}/man/man${sect:L}/%} -.endif -.endfor - -.if !defined(_TMLINKS) -_TMLINKS= -.endif - -.if defined(_MANPAGES) - -.if defined(NO_MANCOMPRESS) -__MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%} -.else -__MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%:S%$%.gz%} -.endif - -.if ${MANCOMPRESSED} == "yes" -_MANPAGES:= ${_MANPAGES:S%$%.gz%} -.endif - -.endif - -.if ${PREFIX} == /usr -INFO_PATH?= share/info -.else -INFO_PATH?= info -.endif - -.if defined(INFO) -. for D in ${INFO:H} -RD:= ${D} -. if ${RD} != "." -. if !defined(INFO_SUBDIR) -INFO_SUBDIR:= ${RD} -. elif ${INFO_SUBDIR} != ${RD} -BROKEN= only one subdirectory in INFO is allowed -. endif -. endif -.undef RD -. endfor -.endif - -DOCSDIR_REL?= ${DOCSDIR:S,^${PREFIX}/,,} -EXAMPLESDIR_REL?= ${EXAMPLESDIR:S,^${PREFIX}/,,} -DATADIR_REL?= ${DATADIR:S,^${PREFIX}/,,} -WWWDIR_REL?= ${WWWDIR:S,^${PREFIX}/,,} -ETCDIR_REL?= ${ETCDIR:S,^${PREFIX}/,,} - -PLIST_SUB+= DOCSDIR="${DOCSDIR_REL}" \ - EXAMPLESDIR="${EXAMPLESDIR_REL}" \ - DATADIR="${DATADIR_REL}" \ - WWWDIR="${WWWDIR_REL}" \ - ETCDIR="${ETCDIR_REL}" - -DESKTOPDIR?= ${PREFIX}/share/applications -_DESKTOPDIR_REL= ${DESKTOPDIR:S,^${PREFIX}/,,}/ - -.if ${_DESKTOPDIR_REL} == ${DESKTOPDIR}/ -# DESKTOPDIR is not beneath PREFIX -_DESKTOPDIR_REL= -.endif - -.MAIN: all - -################################################################ -# Many ways to disable a port. -# -# If we're in BATCH mode and the port is interactive, or we're -# in interactive mode and the port is non-interactive, skip all -# the important targets. The reason we have two modes is that -# one might want to leave a build in BATCH mode running -# overnight, then come back in the morning and do _only_ the -# interactive ones that required your intervention. -# -# Ignore ports that can't be resold if building for a CDROM. -# -# Don't build a port if it's restricted and we don't want to get -# into that. -# -# Don't build a port if it's broken, unless we're running a parallel -# build (in case it's fixed). -# -# Don't build a port if it's forbidden for whatever reason. -# -# Don't build a port if the system is too old. -################################################################ - -# Check the machine architectures -.if defined(ONLY_FOR_ARCHS) -.for __ARCH in ${ONLY_FOR_ARCHS} -.if ${ARCH:M${__ARCH}} != "" -__ARCH_OK?= 1 -.endif -.endfor -.else -__ARCH_OK?= 1 -.endif - -.if defined(NOT_FOR_ARCHS) -.for __NARCH in ${NOT_FOR_ARCHS} -.if ${ARCH:M${__NARCH}} != "" -.undef __ARCH_OK -.endif -.endfor -.endif - -.if !defined(__ARCH_OK) -.if defined(ONLY_FOR_ARCHS) -IGNORE= is only for ${ONLY_FOR_ARCHS}, -.else # defined(NOT_FOR_ARCHS) -IGNORE= does not run on ${NOT_FOR_ARCHS}, -.endif -IGNORE+= while you are running ${ARCH} - -.if defined(ONLY_FOR_ARCHS_REASON_${ARCH}) -IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON_${ARCH}}) -.elif defined(ONLY_FOR_ARCHS_REASON) -IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON}) -.endif - -.if defined(NOT_FOR_ARCHS_REASON_${ARCH}) -IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON_${ARCH}}) -.elif defined(NOT_FOR_ARCHS_REASON) -IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON}) -.endif - -.endif - -# Check the user interaction and legal issues -.if !defined(NO_IGNORE) -.if (defined(IS_INTERACTIVE) && defined(BATCH)) -IGNORE= is an interactive port -.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE)) -IGNORE= is not an interactive port -.elif (defined(NO_CDROM) && defined(FOR_CDROM)) -IGNORE= may not be placed on a CDROM: ${NO_CDROM} -.elif (defined(RESTRICTED) && defined(NO_RESTRICTED)) -IGNORE= is restricted: ${RESTRICTED} -.elif defined(BROKEN) -.if !defined(TRYBROKEN) -IGNORE= is marked as broken: ${BROKEN} -.endif -.elif defined(BROKEN_${ARCH}) -.if !defined(TRYBROKEN) -IGNORE= is marked as broken on ${ARCH}: ${BROKEN_${ARCH}} -.endif -.elif defined(FORBIDDEN) -IGNORE= is forbidden: ${FORBIDDEN} -.endif - -.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING)) -IGNORE= has to be built manually: ${MANUAL_PACKAGE_BUILD} -clean: - @${IGNORECMD} -.endif - -.if defined(IGNORE) -.if defined(IGNORE_SILENT) -IGNORECMD= ${DO_NADA} -.else -IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} "${IGNORE:Q}.;exit 1 -.endif - -.if !defined(NO_STAGE) -_TARGETS= check-sanity fetch checksum extract patch configure all build stage restage install reinstall package -.else -_TARGETS= check-sanity fetch checksum extract patch configure all build install reinstall package -.endif -.for target in ${_TARGETS} -.if !target(${target}) -${target}: - @${IGNORECMD} -.if defined(INSTALLS_DEPENDS) - @${FALSE} -.endif -.endif -.endfor - -.endif - -.endif - -.if defined(IGNORE) || defined(NO_PACKAGE) -ignorelist: package-name -.else -ignorelist: - @${DO_NADA} -.endif - -.if defined(IGNORE) || defined(NO_PACKAGE) -ignorelist-verbose: -.if defined(IGNORE) - @${ECHO_CMD} "${PKGNAME}|IGNORE: "${IGNORE:Q} -.else - @${ECHO_CMD} "${PKGNAME}|NO_PACKAGE: "${NO_PACKAGE:Q} -.endif -.else -ignorelist-verbose: - @${DO_NADA} -.endif - -################################################################ -# Clean directories for ftp or CDROM. -################################################################ - -.if !defined(LICENSE) - -.if defined(RESTRICTED) -clean-restricted: delete-distfiles delete-package -clean-restricted-list: delete-distfiles-list delete-package-list -RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES} -.else -clean-restricted: -clean-restricted-list: -.endif - -.if defined(NO_CDROM) -clean-for-cdrom: delete-distfiles delete-package -clean-for-cdrom-list: delete-distfiles-list delete-package-list -RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES} -.else -clean-for-cdrom: -clean-for-cdrom-list: -.endif - -.endif # !defined(LICENSE) - -.if defined(ALL_HOOK) -all: - @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \ - DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \ - PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \ - FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \ - BUILD_DEPENDS="${BUILD_DEPENDS}" RUN_DEPENDS="${RUN_DEPENDS}" \ - CONFLICTS="${CONFLICTS}" \ - ${ALL_HOOK} -.endif - -.if !target(all) -all: build -.endif - -.if !defined(DEPENDS_TARGET) -.if defined(DEPENDS_PRECLEAN) -DEPENDS_TARGET= clean -DEPENDS_ARGS= NOCLEANDEPENDS=yes -.endif -.if make(reinstall) -DEPENDS_TARGET+= reinstall -.else -DEPENDS_TARGET+= install -.endif -.if defined(DEPENDS_CLEAN) -DEPENDS_TARGET+= clean -DEPENDS_ARGS+= NOCLEANDEPENDS=yes -.endif -.endif - -################################################################ -# -# Do preliminary work to detect if we need to run the config -# target or not. -# -################################################################ -.if ((!defined(OPTIONS_DEFINE) && !defined(OPTIONS_SINGLE) && !defined(OPTIONS_MULTI)) \ - && !defined(OPTIONS_GROUP) && !defined(OPTIONS_RADIO) \ - || defined(CONFIG_DONE_${UNIQUENAME:U}) || \ - defined(PACKAGE_BUILDING) || defined(BATCH)) -_OPTIONS_OK=yes -.endif - -################################################################ -# The following are used to create easy dummy targets for -# disabling some bit of default target behavior you don't want. -# They still check to see if the target exists, and if so don't -# do anything, since you might want to set this globally for a -# group of ports in a Makefile.inc, but still be able to -# override from an individual Makefile. -################################################################ - -# Disable checksum -.if defined(NO_CHECKSUM) && !target(checksum) -checksum: fetch - @${DO_NADA} -.endif - -# Disable build -.if defined(NO_BUILD) && !target(build) -build: configure - @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE} -.endif - -# Disable install -.if defined(NO_INSTALL) && !target(do-install) -do-install: - @${DO_NADA} -.endif - -# Disable package -.if defined(NO_PACKAGE) && !target(package) -package: -.if defined(IGNORE_SILENT) - @${DO_NADA} -.else - @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: "${NO_PACKAGE:Q}. -.endif -.endif - -# Disable describe -.if defined(NO_DESCRIBE) && !target(describe) -describe: - @${DO_NADA} -.endif - -################################################################ -# More standard targets start here. -# -# These are the body of the build/install framework. If you are -# not happy with the default actions, and you can't solve it by -# adding pre-* or post-* targets/scripts, override these. -################################################################ - -# Pre-everything - -pre-everything:: - @${DO_NADA} - -buildanyway-message: -.if defined(TRYBROKEN) && defined(BROKEN) - @${ECHO_MSG} "Trying build of ${PKGNAME} even though it is marked BROKEN." -.else - @${DO_NADA} -.endif - -options-message: -.if defined(GNOME_OPTION_MSG) && (!defined(PACKAGE_BUILDING) || !defined(BATCH)) - @for m in ${GNOME_OPTION_MSG}; do \ - ${ECHO_MSG} $$m; \ - done -.else - @${DO_NADA} -.endif -.if defined(_OPTIONS_READ) - @${ECHO_MSG} "===> Found saved configuration for ${_OPTIONS_READ}" -.endif - - -# Warn user about deprecated packages. Advisory only. - -.if !target(check-deprecated) -check-deprecated: -.if defined(DEPRECATED) - @${ECHO_MSG} "===> NOTICE:" - @${ECHO_MSG} - @${ECHO_MSG} "This port is deprecated; you may wish to reconsider installing it:" - @${ECHO_MSG} - @${ECHO_MSG} ${DEPRECATED:Q}. - @${ECHO_MSG} -.if defined(EXPIRATION_DATE) - @${ECHO_MSG} "It is scheduled to be removed on or after ${EXPIRATION_DATE}." - @${ECHO_MSG} -.endif -.endif -.endif - -# Check if the port is listed in the vulnerability database - -.if defined(WITH_PKGNG) -AUDITFILE?= ${PKG_DBDIR}/vuln.xml -_EXTRACT_AUDITFILE= ${CAT} "${AUDITFILE}" -.else -AUDITFILE?= /var/db/portaudit/auditfile.tbz -_EXTRACT_AUDITFILE= ${TAR} -jxOf "${AUDITFILE}" auditfile -.endif - -check-vulnerable: -.if !defined(DISABLE_VULNERABILITIES) && !defined(PACKAGE_BUILDING) - @if [ -f "${AUDITFILE}" ]; then \ - if [ -n "${WITH_PKGNG}" ]; then \ - if [ -x "${PKG_BIN}" ]; then \ - vlist=`${PKG_BIN} audit "${PKGNAME}"`; \ - elif [ "${PORTNAME}" = "pkg" ]; then \ - vlist=""; \ - else \ - ${ECHO_MSG} "===> Unable to check vuln database as pkg(8) is missing"; \ - exit 1; \ - fi; \ - elif [ -x "${LOCALBASE}/sbin/portaudit" ]; then \ - vlist=`${LOCALBASE}/sbin/portaudit -X 14 "${PKGNAME}" \ - 2>&1 | grep -vE '^[0-9]+ problem\(s\) found.' \ - || true`; \ - else \ - ${ECHO_MSG} "===> portaudit database exists, however, portaudit is not installed!"; \ - fi; \ - if [ -n "$$vlist" ]; then \ - ${ECHO_MSG} "===> ${PKGNAME} has known vulnerabilities:"; \ - ${ECHO_MSG} "$$vlist"; \ - ${ECHO_MSG} "=> Please update your ports tree and try again."; \ - exit 1; \ - fi; \ - fi -.endif - -# set alg to any of SIZE, SHA256 (or any other checksum algorithm): -DISTINFO_DATA?= if [ \( -n "${DISABLE_SIZE}" -a -n "${NO_CHECKSUM}" \) -o ! -f "${DISTINFO_FILE}" ]; then exit; fi; \ - DIR=${DIST_SUBDIR}; ${AWK} -v alg=$$alg -v file=$${DIR:+$$DIR/}$${file} \ - '$$1 == alg && $$2 == "(" file ")" {print $$4}' ${DISTINFO_FILE} - -# Fetch - -.if !target(do-fetch) -do-fetch: - @${MKDIR} ${_DISTDIR} - @cd ${_DISTDIR};\ - ${_MASTER_SITES_ENV} ; \ - for _file in ${DISTFILES}; do \ - file=$${_file%%:*}; \ - if [ $$_file = $$file ]; then \ - select=''; \ - else \ - select=`${ECHO_CMD} $${_file##*:} | ${SED} -e 's/,/ /g'` ; \ - fi; \ - force_fetch=false; \ - filebasename=$${file##*/}; \ - for afile in ${FORCE_FETCH}; do \ - afile=$${afile##*/}; \ - if [ "x$$afile" = "x$$filebasename" ]; then \ - force_fetch=true; \ - fi; \ - done; \ - if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \ - if [ -L $$file -o -L $$filebasename ]; then \ - ${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \ - ${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \ - ${ECHO_MSG} "=> Please correct this problem and try again."; \ - exit 1; \ - fi; \ - if [ -f ${DISTINFO_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \ - _sha256sum=`alg=SHA256; ${DISTINFO_DATA}`; \ - if [ -z "$$_sha256sum" ]; then \ - ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is not in ${DISTINFO_FILE}."; \ - ${ECHO_MSG} "=> Either ${DISTINFO_FILE} is out of date, or"; \ - ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is spelled incorrectly."; \ - exit 1; \ - fi; \ - fi; \ - ${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \ - if [ ! -w ${DISTDIR} ]; then \ - ${ECHO_MSG} "=> ${DISTDIR} is not writable by you; cannot fetch."; \ - exit 1; \ - fi; \ - if [ ! -z "$$select" ] ; then \ - __MASTER_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \ - eval ___MASTER_SITES_TMP="\$${_MASTER_SITES_$${group}}" ; \ - __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \ - fi; \ - done; \ - ___MASTER_SITES_TMP= ; \ - SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \ - fi; \ - sites_remaining=0; \ - sites="`eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`"; \ - for site in $${sites}; do \ - sites_remaining=$$(($${sites_remaining} + 1)); \ - done; \ - for site in $${sites}; do \ - sites_remaining=$$(($${sites_remaining} - 1)); \ - ${ECHO_MSG} "=> Attempting to fetch $${site}$${file}"; \ - CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ - case $${file} in \ - */*) ${MKDIR} $${file%/*}; \ - args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \ - actual_size=`stat -f %z "$${file}"`; \ - if [ -n "${DISABLE_SIZE}" ] || [ -z "$${CKSIZE}" ] || [ $${actual_size} -eq $${CKSIZE} ]; then \ - continue 2; \ - else \ - ${ECHO_MSG} "=> Fetched file size mismatch (expected $${CKSIZE}, actual $${actual_size})"; \ - if [ $${sites_remaining} -gt 1 ]; then \ - ${ECHO_MSG} "=> Trying next site"; \ - ${RM} -f $${file}; \ - fi; \ - fi; \ - fi; \ - done; \ - ${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\ - ${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \ - exit 1; \ - fi; \ - done -.if defined(PATCHFILES) - @cd ${_DISTDIR};\ - ${_PATCH_SITES_ENV} ; \ - for _file in ${PATCHFILES}; do \ - file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^-:][^:]*$$//'` ; \ - select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ - file=`${ECHO_CMD} $$file | ${SED} -E -e 's/:-[^:]+$$//'` ; \ - force_fetch=false; \ - filebasename=$${file##*/}; \ - for afile in ${FORCE_FETCH}; do \ - afile=$${afile##*/}; \ - if [ "x$$afile" = "x$$filebasename" ]; then \ - force_fetch=true; \ - fi; \ - done; \ - if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \ - if [ -L $$file -o -L $${file##*/} ]; then \ - ${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \ - ${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \ - ${ECHO_MSG} "=> Please correct this problem and try again."; \ - exit 1; \ - fi; \ - ${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \ - if [ ! -z "$$select" ] ; then \ - __PATCH_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \ - eval ___PATCH_SITES_TMP="\$${_PATCH_SITES_$${group}}" ; \ - __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \ - fi; \ - done; \ - ___PATCH_SITES_TMP= ; \ - SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \ - fi; \ - sites_remaining=0; \ - sites="`eval $$SORTED_PATCH_SITES_CMD_TMP`"; \ - for site in $${sites}; do \ - sites_remaining=$$(($${sites_remaining} + 1)); \ - done; \ - for site in $${sites}; do \ - sites_remaining=$$(($${sites_remaining} - 1)); \ - ${ECHO_MSG} "=> Attempting to fetch $${site}$${file}"; \ - CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ - case $${file} in \ - */*) ${MKDIR} $${file%/*}; \ - args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \ - actual_size=`stat -f %z "$${file}"`; \ - if [ -n "${DISABLE_SIZE}" ] || [ -z "$${CKSIZE}" ] || [ $${actual_size} -eq $${CKSIZE} ]; then \ - continue 2; \ - else \ - ${ECHO_MSG} "=> Fetched file size mismatch (expected $${CKSIZE}, actual $${actual_size})"; \ - if [ $${sites_remaining} -gt 1 ]; then \ - ${ECHO_MSG} "=> Trying next site"; \ - ${RM} -f $${file}; \ - fi; \ - fi; \ - fi; \ - done; \ - ${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\ - ${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \ - exit 1; \ - fi; \ - done -.endif -.endif - -# Extract - -.if !target(do-extract) -do-extract: - @${RM} -rf ${WRKDIR} - @${MKDIR} ${WRKDIR} - @for file in ${EXTRACT_ONLY}; do \ - if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\ - then \ - exit 1; \ - fi; \ - done -.if !defined(EXTRACT_PRESERVE_OWNERSHIP) - @if [ ${UID} = 0 ]; then \ - ${CHMOD} -R ug-s ${WRKDIR}; \ - ${CHOWN} -R 0:0 ${WRKDIR}; \ - fi -.endif -.endif - -# Patch - -.if !target(patch-dos2unix) -patch-dos2unix: -.if defined(USE_DOS2UNIX) -.if ${USE_DOS2UNIX:U}=="YES" - @${ECHO_MSG} "===> Converting DOS text files to UNIX text files" - @${FIND} -E ${WRKSRC} -type f -iregex '${DOS2UNIX_REGEX}' -print0 | \ - ${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/
$$//' -.else -.if ${USE_DOS2UNIX:M*/*} -.for f in ${USE_DOS2UNIX} - @${ECHO_MSG} "===> Converting DOS text file to UNIX text file: ${f}" - @${REINPLACE_CMD} -i '' -e 's/
$$//' ${WRKSRC}/${f} -.endfor -.else -.for f in ${USE_DOS2UNIX} - @${FIND} ${WRKSRC} -type f -name '${f}' -print0 | \ - ${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/
$$//' -.endfor -.endif -.endif -.else - @${DO_NADA} -.endif -.endif - -.if !target(do-patch) -do-patch: -.if defined(PATCHFILES) - @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}" - @(set -e; \ - cd ${_DISTDIR}; \ - patch_dist_strip () { \ - case "$$1" in \ - ${_PATCH_DIST_STRIP_CASES} \ - esac; \ - }; \ - for i in ${_PATCHFILES}; do \ - if [ ${PATCH_DEBUG_TMP} = yes ]; then \ - ${ECHO_MSG} "===> Applying distribution patch $$i" ; \ - fi ; \ - case $$i in \ - *.Z|*.gz) ${GZCAT} $$i ;; \ - *.bz2) ${BZCAT} $$i ;; \ - *.xz) ${XZCAT} $$i ;; \ - *) ${CAT} $$i ;; \ - esac | ${PATCH} ${PATCH_DIST_ARGS} `patch_dist_strip $$i` ; \ - done ) -.endif -.if defined(EXTRA_PATCHES) - @set -e ; \ - for i in ${EXTRA_PATCHES}; do \ - ${ECHO_MSG} "===> Applying extra patch $$i" ; \ - case $$i in \ - *.Z|*.gz) ${GZCAT} $$i ;; \ - *.bz2) ${BZCAT} $$i ;; \ - *.xz) ${XZCAT} $$i ;; \ - *) ${CAT} $$i ;; \ - esac | ${PATCH} ${PATCH_ARGS} ; \ - done -.endif - @set -e ;\ - if [ -d ${PATCHDIR} ]; then \ - if [ "`${ECHO_CMD} ${PATCHDIR}/patch-*`" != "${PATCHDIR}/patch-*" ]; then \ - ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \ - PATCHES_APPLIED="" ; \ - for i in ${PATCHDIR}/patch-*; do \ - case $$i in \ - *.orig|*.rej|*~|*,v) \ - ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \ - ;; \ - *) \ - if [ ${PATCH_DEBUG_TMP} = yes ]; then \ - ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \ - fi; \ - if ${PATCH} ${PATCH_ARGS} < $$i ; then \ - PATCHES_APPLIED="$$PATCHES_APPLIED $$i" ; \ - else \ - ${ECHO_MSG} `${ECHO_CMD} "=> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \ - if [ x"$$PATCHES_APPLIED" != x"" ]; then \ - ${ECHO_MSG} `${ECHO_CMD} "=> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \ - fi; \ - ${FALSE} ; \ - fi; \ - ;; \ - esac; \ - done; \ - fi; \ - fi -.endif - -.if !target(run-autotools-fixup) -run-autotools-fixup: -# Work around an issue where FreeBSD 10.0 is detected as FreeBSD 1.x. -.if ${OSVERSION} >= 1000000 && !defined(WITHOUT_FBSD10_FIX) - -@for f in `${FIND} ${WRKDIR} -type f \( -name config.libpath -o \ - -name config.rpath -o -name configure -o -name libtool.m4 -o \ - -name ltconfig -o -name libtool -o -name aclocal.m4 -o \ - -name acinclude.m4 \)` ; do \ - ${SED} -i.fbsd10bak \ - -e 's|freebsd1\*)|freebsd1.\*)|g' \ - -e 's|freebsd\[12\]\*)|freebsd[12].*)|g' \ - -e 's|freebsd\[123\]\*)|freebsd[123].*)|g' \ - -e 's|freebsd\[\[12\]\]\*)|freebsd[[12]].*)|g' \ - -e 's|freebsd\[\[123\]\]\*)|freebsd[[123]].*)|g' \ - $${f} ; \ - ${TOUCH} ${TOUCH_FLAGS} -mr $${f}.fbsd10bak $${f} ; \ - ${RM} -f $${f}.fbsd10bak ; \ - ${ECHO_MSG} "===> FreeBSD 10 autotools fix applied to $${f}"; \ - done -.endif -.endif - -.if !target(configure-autotools) -configure-autotools: - @${DO_NADA} -.endif - -.if !target(run-autotools) -run-autotools: - @${DO_NADA} -.endif - -# Configure - -.if !target(do-configure) -do-configure: - @if [ -f ${SCRIPTDIR}/configure ]; then \ - cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ - ${SCRIPTDIR}/configure; \ - fi -.if defined(GNU_CONFIGURE) - @CONFIG_GUESS_DIRS=$$(${FIND} ${WRKDIR} -name config.guess -o -name config.sub \ - | ${XARGS} -n 1 ${DIRNAME}); \ - for _D in $${CONFIG_GUESS_DIRS}; do \ - ${CP} -f ${TEMPLATES}/config.guess $${_D}/config.guess; \ - ${CHMOD} a+rx $${_D}/config.guess; \ - ${CP} -f ${TEMPLATES}/config.sub $${_D}/config.sub; \ - ${CHMOD} a+rx $${_D}/config.sub; \ - done -.endif -.if defined(HAS_CONFIGURE) - @(cd ${CONFIGURE_WRKSRC} && \ - ${SET_LATE_CONFIGURE_ARGS} \ - if ! ${SETENV} CC="${CC}" CPP="${CPP}" CXX="${CXX}" \ - CFLAGS="${CFLAGS}" CPPFLAGS="${CPPFLAGS}" CXXFLAGS="${CXXFLAGS}" \ - LDFLAGS="${LDFLAGS}" \ - INSTALL="/usr/bin/install -c ${_BINOWNGRP}" \ - INSTALL_DATA="${INSTALL_DATA}" \ - INSTALL_LIB="${INSTALL_LIB}" \ - INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ - INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ - ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}; then \ - ${ECHO_MSG} "===> Script \"${CONFIGURE_SCRIPT}\" failed unexpectedly."; \ - (${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT} 75 79 ; \ - ${FALSE}; \ - fi) -.endif -.endif - -# Build - -.if !target(do-build) -do-build: - @(cd ${BUILD_WRKSRC}; if ! ${SETENV} ${MAKE_ENV} ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS} ${ALL_TARGET}; then \ - if [ -n "${BUILD_FAIL_MESSAGE}" ] ; then \ - ${ECHO_MSG} "===> Compilation failed unexpectedly."; \ - (${ECHO_CMD} "${BUILD_FAIL_MESSAGE}") | ${FMT} 75 79 ; \ - fi; \ - ${FALSE}; \ - fi) -.endif - -# Check conflicts - -.if !target(check-conflicts) -check-conflicts: check-build-conflicts check-install-conflicts -.endif - -.if !target(check-build-conflicts) -check-build-conflicts: -.if ( defined(CONFLICTS) || defined(CONFLICTS_BUILD) ) && !defined(DISABLE_CONFLICTS) && !defined(DEFER_CONFLICTS_CHECK) - @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \ - conflicts_with=; \ - for entry in $${found}; do \ - if ${PKG_INFO} -e $${entry} ; then \ - prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \ - orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \ - if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ - conflicts_with="$${conflicts_with} $${entry}"; \ - fi; \ - fi; \ - done; \ - if [ -n "$${conflicts_with}" ]; then \ - ${ECHO_MSG}; \ - ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ - for entry in $${conflicts_with}; do \ - ${ECHO_MSG} " $${entry}"; \ - done; \ - ${ECHO_MSG}; \ - ${ECHO_MSG} " They will not build together."; \ - ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \ - exit 1; \ - fi -.endif -.endif - -.if !target(identify-install-conflicts) -identify-install-conflicts: -.if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) ) && !defined(DISABLE_CONFLICTS) - @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \ - conflicts_with=; \ - for entry in $${found}; do \ - if ${PKG_INFO} -e $${entry} ; then \ - prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \ - orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \ - if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ - conflicts_with="$${conflicts_with} $${entry}"; \ - fi; \ - fi; \ - done; \ - if [ -n "$${conflicts_with}" ]; then \ - ${ECHO_MSG}; \ - ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ - for entry in $${conflicts_with}; do \ - ${ECHO_MSG} " $${entry}"; \ - done; \ - ${ECHO_MSG}; \ - ${ECHO_MSG} " They install files into the same place."; \ - ${ECHO_MSG} " You may want to stop build with Ctrl + C."; \ - sleep 10; \ - fi -.endif -.endif - -.if !target(check-install-conflicts) -check-install-conflicts: -.if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) || ( defined(CONFLICTS_BUILD) && defined(DEFER_CONFLICTS_CHECK) ) ) && !defined(DISABLE_CONFLICTS) -.if defined(DEFER_CONFLICTS_CHECK) - @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \ - conflicts_with=; \ - for entry in $${found}; do \ - if ${PKG_INFO} -e $${entry} ; then \ - prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \ - orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \ - if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ - conflicts_with="$${conflicts_with} $${entry}"; \ - fi; \ - fi; \ - done; \ - if [ -n "$${conflicts_with}" ]; then \ - ${ECHO_MSG}; \ - ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ - for entry in $${conflicts_with}; do \ - ${ECHO_MSG} " $${entry}"; \ - done; \ - ${ECHO_MSG}; \ - ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \ - exit 1; \ - fi -.else - @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \ - conflicts_with=; \ - for entry in $${found}; do \ - if ${PKG_INFO} -e $${entry} ; then \ - prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \ - orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \ - if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ - conflicts_with="$${conflicts_with} $${entry}"; \ - fi; \ - fi; \ - done; \ - if [ -n "$${conflicts_with}" ]; then \ - ${ECHO_MSG}; \ - ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ - for entry in $${conflicts_with}; do \ - ${ECHO_MSG} " $${entry}"; \ - done; \ - ${ECHO_MSG}; \ - ${ECHO_MSG} " They install files into the same place."; \ - ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \ - exit 1; \ - fi -.endif # defined(DEFER_CONFLICTS_CHECK) -.endif -.endif - -# Install - -.if !target(do-install) -do-install: - @(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET}) -.endif - -# Package - -.if !target(do-package) -do-package: ${TMPPLIST} - @if [ -d ${PACKAGES} ]; then \ - if [ ! -d ${PKGREPOSITORY} ]; then \ - if ! ${MKDIR} ${PKGREPOSITORY}; then \ - ${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \ - exit 1; \ - fi; \ - fi; \ - fi -.if defined(NO_STAGE) - @if ${PKG_CMD} -b ${PKGNAME} ${PKGFILE}; then \ - if [ -d ${PACKAGES} ]; then \ - cd ${.CURDIR} && eval ${MAKE} package-links; \ - fi; \ - else \ - cd ${.CURDIR} && eval ${MAKE} delete-package; \ - exit 1; \ - fi -.else - @_LATE_PKG_ARGS=""; \ - if [ -f ${PKGINSTALL} ]; then \ - _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -i ${PKGINSTALL}"; \ - fi; \ - if [ -f ${PKGDEINSTALL} ]; then \ - _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -k ${PKGDEINSTALL}"; \ - fi; \ - if [ -f ${PKGREQ} ]; then \ - _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -r ${PKGREQ}"; \ - fi; \ - if [ -f ${PKGMESSAGE} ]; then \ - _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -D ${PKGMESSAGE}"; \ - fi; \ - if ${PKG_CMD} -S ${STAGEDIR} ${PKG_ARGS} ${WRKDIR}/${PKGNAME}${PKG_SUFX}; then \ - if [ -d ${PACKAGES} -a -w ${PACKAGES} ]; then \ - ${LN} -f ${WRKDIR}/${PKGNAME}${PKG_SUFX} ${PKGFILE} 2>/dev/null || \ - ${CP} -af ${WRKDIR}/${PKGNAME}${PKG_SUFX} ${PKGFILE}; \ - cd ${.CURDIR} && eval ${MAKE} package-links; \ - fi; \ - else \ - cd ${.CURDIR} && eval ${MAKE} delete-package; \ - exit 1; \ - fi -.endif -.endif - -# Some support rules for do-package - -.if !target(package-links) -package-links: delete-package-links - @for cat in ${CATEGORIES}; do \ - if [ ! -d ${PACKAGES}/$$cat ]; then \ - if ! ${MKDIR} ${PACKAGES}/$$cat; then \ - ${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \ - exit 1; \ - fi; \ - fi; \ - ${LN} -sf `${ECHO_CMD} $$cat | ${SED} -e 'sa[^/]*a..ag'`/${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \ - done -.if !defined(NO_LATEST_LINK) - @if [ ! -d ${PKGLATESTREPOSITORY} ]; then \ - if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \ - ${ECHO_MSG} "=> Can't create directory ${PKGLATESTREPOSITORY}."; \ - exit 1; \ - fi; \ - fi - @${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PKGLATESTFILE} -.endif -.endif - -.if !target(delete-package-links) -delete-package-links: - @for cat in ${CATEGORIES}; do \ - ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \ - done -.if !defined(NO_LATEST_LINK) - @${RM} -f ${PKGLATESTFILE} -.endif -.endif - -.if !target(delete-package) -delete-package: delete-package-links -. if defined(NO_STAGE) - @${RM} -f ${PKGFILE} -. else -# When staging, the package may only be in the workdir if not root - @${RM} -f ${PKGFILE} ${WRKDIR}/${PKGNAME}${PKG_SUFX} 2>/dev/null || : -. endif -.endif - -.if !target(delete-package-links-list) -delete-package-links-list: - @for cat in ${CATEGORIES}; do \ - ${ECHO_CMD} ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \ - done -.if !defined(NO_LATEST_LINK) - @${ECHO_CMD} ${RM} -f ${PKGLATESTFILE} -.endif -.endif - -.if !target(delete-package-list) -delete-package-list: delete-package-links-list - @${ECHO_CMD} "[ -f ${PKGFILE} ] && (${ECHO_CMD} deleting ${PKGFILE}; ${RM} -f ${PKGFILE})" -.endif - -# Only used if !defined(NO_STAGE) -.if !target(install-package) -install-package: -.if defined(FORCE_PKG_REGISTER) - @${PKG_ADD} -f ${WRKDIR}/${PKGNAME}${PKG_SUFX} -.else - @${PKG_ADD} ${WRKDIR}/${PKGNAME}${PKG_SUFX} -.endif -.endif - - -# Utility targets follow - -.if !target(check-already-installed) -check-already-installed: ${TMPPLIST_SORT} -.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) - @${ECHO_MSG} "===> Checking if ${PKGORIGIN} already installed"; \ - ${MKDIR} ${PKG_DBDIR}; \ - already_installed=`${PKG_INFO} -q -O ${PKGORIGIN}`; \ - if [ -n "$${already_installed}" ]; then \ - for p in $${already_installed}; do \ - prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \ - if [ "x${PREFIX}" = "x$${prfx}" ]; then \ - df=`${PKG_INFO} -q -f $${p} 2> /dev/null | ${GREP} -v "^@" | ${SORT} -u | ${COMM} -12 - ${TMPPLIST_SORT}`; \ - if [ -n "$${df}" ]; then \ - found_package=$${p}; \ - break; \ - fi; \ - fi; \ - done; \ - fi; \ - if [ -d ${PKG_DBDIR}/${PKGNAME} -o -n "$${found_package}" ]; then \ - if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \ - ${ECHO_CMD} "===> ${PKGNAME} is already installed"; \ - else \ - ${ECHO_CMD} "===> An older version of ${PKGORIGIN} is already installed ($${found_package})"; \ - fi; \ - ${ECHO_MSG} " You may wish to \`\`make deinstall'' and install this port again"; \ - ${ECHO_MSG} " by \`\`make reinstall'' to upgrade it properly."; \ - ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGORIGIN}"; \ - ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \ - ${ECHO_MSG} " in your environment or the \"make install\" command line."; \ - exit 1; \ - fi -.else - @${DO_NADA} -.endif -.endif - -.if !target(check-umask) -check-umask: - @if [ `${SH} -c umask` != 0022 ]; then \ - ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \ - ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \ - ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \ - fi -.endif - -.if !target(install-mtree) -install-mtree: - @${MKDIR} ${PREFIX} - @if [ ${UID} != 0 ]; then \ - if [ -w ${PREFIX}/ ]; then \ - ${ECHO_MSG} "Warning: not superuser, you may get some errors during installation."; \ - else \ - ${ECHO_MSG} "Error: ${PREFIX}/ not writable."; \ - ${FALSE}; \ - fi; \ - fi -.if !defined(NO_MTREE) - @if [ ${UID} = 0 ]; then \ - if [ ! -f ${MTREE_FILE} ]; then \ - ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \ - ${ECHO_MSG} "Copy it from a suitable location (e.g., ${SRC_BASE}/etc/mtree) and try again."; \ - exit 1; \ - else \ - ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \ - if [ ${PREFIX} = ${LOCALBASE} -a "${MTREE_FILE_DEFAULT}" = "yes" ]; then \ - cd ${PREFIX}/share/nls; \ - for link in POSIX en_US.US-ASCII; \ - do \ - if [ x"`${READLINK_CMD} $${link}`" != x"C" ]; \ - then \ - ${LN} -shf C $${link}; \ - fi; \ - done; \ - fi; \ - fi; \ - else \ - ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \ - ${ECHO_MSG} "You may want to become root and try again to ensure correct permissions."; \ - fi -.endif -.endif - -.if !target(install-ldconfig-file) -install-ldconfig-file: -.if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) -.if defined(USE_LDCONFIG) -.if defined(USE_LINUX_PREFIX) -.if defined(NO_STAGE) - @${ECHO_MSG} "===> Running linux ldconfig" - ${LDCONFIG_CMD} -.endif -.else -.if defined(NO_STAGE) -.if !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Running ldconfig" - ${LDCONFIG} -m ${USE_LDCONFIG} -.else - @${ECHO_MSG} "===> Running ldconfig (errors are ignored)" - -${LDCONFIG} -m ${USE_LDCONFIG} -.endif -.endif -.if ${USE_LDCONFIG} != "${PREFIX}/lib" && !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Installing ldconfig configuration file" -.if defined(NO_LDCONFIG_MTREE) - @${MKDIR} ${STAGEDIR}${PREFIX}/${LDCONFIG_DIR} -.endif - @${ECHO_CMD} ${USE_LDCONFIG} | ${TR} ' ' '\n' \ - > ${STAGEDIR}${PREFIX}/${LDCONFIG_DIR}/${UNIQUENAME} - @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST} - @${ECHO_CMD} ${LDCONFIG_DIR}/${UNIQUENAME} >> ${TMPPLIST} -.if defined(NO_LDCONFIG_MTREE) - @${ECHO_CMD} "@unexec rmdir ${LDCONFIG_DIR} >/dev/null 2>&1 || true" >> ${TMPPLIST} -.endif -.endif -.endif -.endif -.if defined(USE_LDCONFIG32) -.if defined(NO_STAGE) -.if !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Running ldconfig" - ${LDCONFIG} -32 -m ${USE_LDCONFIG32} -.else - @${ECHO_MSG} "===> Running ldconfig (errors are ignored)" - -${LDCONFIG} -32 -m ${USE_LDCONFIG32} -.endif -.endif -.if !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Installing 32-bit ldconfig configuration file" -.if defined(NO_LDCONFIG_MTREE) - @${MKDIR} ${STAGEDIR}${PREFIX}/${LDCONFIG_32DIR} -.endif - @${ECHO_CMD} ${USE_LDCONFIG32} | ${TR} ' ' '\n' \ - > ${STAGEDIR}${PREFIX}/${LDCONFIG32_DIR}/${UNIQUENAME} - @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST} - @${ECHO_CMD} ${LDCONFIG32_DIR}/${UNIQUENAME} >> ${TMPPLIST} -.if defined(NO_LDCONFIG_MTREE) - @${ECHO_CMD} "@unexec rmdir ${LDCONFIG32_DIR} >/dev/null 2>&1" >> ${TMPPLIST} -.endif -.endif -.endif -.if defined(INSTALLS_SHLIB) - @${ECHO_MSG} "INSTALLS_SHLIB is deprecated. Use USE_LDCONFIG instead." -.endif -.endif -.endif - -.if !target(create-users-groups) -.if defined(GROUPS) || defined(USERS) -.if defined(WITH_PKGNG) -_UG_OUTPUT= ${WRKDIR}/users-groups.sh -PKGPREINSTALL+= ${_UG_OUTPUT} -.else -_UG_OUTPUT= /dev/null -.endif -.endif -create-users-groups: -.if defined(GROUPS) || defined(USERS) -.if defined(GROUPS) -.for _file in ${GID_FILES} -.if !exists(${_file}) - @${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1 -.endif -.endfor -.if defined(WITH_PKGNG) - @${RM} -f ${_UG_OUTPUT} || ${TRUE} -.endif - @${ECHO_MSG} "===> Creating users and/or groups." -.if defined(WITH_PKGNG) - @${ECHO_CMD} "echo \"===> Creating users and/or groups.\"" >> ${_UG_OUTPUT} -.else - @${ECHO_CMD} "@exec echo \"===> Creating users and/or groups.\"" >> ${TMPPLIST} -.endif -.for _group in ${GROUPS} -# _bgpd:*:130: - @if ! ${GREP} -h ^${_group}: ${GID_FILES} >/dev/null 2>&1; then \ - ${ECHO_CMD} "** Cannot find any information about group \`${_group}' in ${GID_FILES}."; \ - exit 1; \ - fi - @IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \ - gid=$$(($$gid+${GID_OFFSET})); \ - if [ "${NO_STAGE}" = "yes" ]; then \ - if ! ${PW} groupshow $$group >/dev/null 2>&1; then \ - ${ECHO_MSG} "Creating group \`$$group' with gid \`$$gid'."; \ - ${PW} groupadd $$group -g $$gid; \ - else \ - ${ECHO_MSG} "Using existing group \`$$group'."; \ - fi; \ - fi ; \ - if [ -z "${WITH_PKGNG}" ]; then \ - ${ECHO_CMD} "@exec if ! ${PW} groupshow $$group >/dev/null 2>&1; then \ - echo \"Creating group '$$group' with gid '$$gid'.\"; \ - ${PW} groupadd $$group -g $$gid; else echo \"Using existing group '$$group'.\"; fi" >> ${TMPPLIST}; \ - else \ - ${ECHO_CMD} -e "if ! ${PW} groupshow $$group >/dev/null 2>&1; then \n \ - echo \"Creating group '$$group' with gid '$$gid'.\" \n \ - ${PW} groupadd $$group -g $$gid; else echo \"Using existing group '$$group'.\"\nfi" >> ${_UG_OUTPUT}; \ - fi ; \ - done -.endfor -.endif -.if defined(USERS) -.for _file in ${UID_FILES} -.if !exists(${_file}) - @${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1 -.endif -.endfor -.for _user in ${USERS} -# _bgpd:*:130:130:BGP Daemon:/var/empty:/sbin/nologin - @if ! ${GREP} -h ^${_user}: ${UID_FILES} >/dev/null 2>&1; then \ - ${ECHO_CMD} "** Cannot find any information about user \`${_user}' in ${UID_FILES}."; \ - exit 1; \ - fi - @IFS=":"; ${GREP} -h ^${_user}: ${UID_FILES} | head -n 1 | while read login passwd uid gid class change expire gecos homedir shell; do \ - uid=$$(($$uid+${UID_OFFSET})); \ - gid=$$(($$gid+${GID_OFFSET})); \ - class="$${class:+-L }$$class"; \ - homedir=$$(echo $$homedir | sed "s|^/usr/local|${PREFIX}|"); \ - if [ "${NO_STAGE}" = "yes" ]; then \ - if ! ${PW} usershow $$login >/dev/null 2>&1; then \ - ${ECHO_MSG} "Creating user \`$$login' with uid \`$$uid'."; \ - eval ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; \ - case $$homedir in /nonexistent|/var/empty) ;; *) ${INSTALL} -d -g $$gid -o $$uid $$homedir;; esac; \ - else \ - ${ECHO_MSG} "Using existing user \`$$login'."; \ - fi; \ - fi; \ - if [ -z "${WITH_PKGNG}" ]; then \ - ${ECHO_CMD} "@exec if ! ${PW} usershow $$login >/dev/null 2>&1; then \ - echo \"Creating user '$$login' with uid '$$uid'.\"; \ - ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; \ - else echo \"Using existing user '$$login'.\"; fi" >> ${TMPPLIST}; \ - else \ - ${ECHO_CMD} -e "if ! ${PW} usershow $$login >/dev/null 2>&1; then \n \ - echo \"Creating user '$$login' with uid '$$uid'.\" \n \ - ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell \n \ - else \necho \"Using existing user '$$login'.\" \nfi" >> ${_UG_OUTPUT}; \ - fi ; \ - case $$homedir in /nonexistent|/var/empty) ;; *) ${ECHO_CMD} "@exec ${INSTALL} -d -g $$gid -o $$uid $$homedir" >> ${TMPPLIST};; esac; \ - done -.endfor -.if defined(GROUPS) -.for _group in ${GROUPS} -# mail:*:6:postfix,clamav - @IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \ - gid=$$(($$gid+${GID_OFFSET})); \ - IFS=","; for _login in $$members; do \ - for _user in ${USERS}; do \ - if [ "x$${_user}" = "x$${_login}" ]; then \ - if ! ${PW} groupshow ${_group} | ${GREP} -qw $${_login}; then \ - ${ECHO_MSG} "Adding user \`$${_login}' to group \`${_group}'."; \ - ${PW} groupmod ${_group} -m $${_login}; \ - fi; \ - if [ -z "${WITH_PKGNG}" ]; then \ - ${ECHO_CMD} "@exec if ! ${PW} groupshow ${_group} | ${GREP} -qw $${_login}; then \ - echo \"Adding user '$${_login}' to group '${_group}'.\"; \ - ${PW} groupmod ${_group} -m $${_login}; fi" >> ${TMPPLIST}; \ - else \ - ${ECHO_CMD} -e "if ! ${PW} groupshow ${_group} | ${GREP} -qw $${_login}; then \n \ - echo \"Adding user '$${_login}' to group '${_group}'.\" \n \ - ${PW} groupmod ${_group} -m $${_login} \nfi" >> ${_UG_OUTPUT}; \ - fi ; \ - fi; \ - done; \ - done; \ - done -.endfor -.endif -.if defined(USERS) -.for _user in ${USERS} - @if [ ! ${USERS_BLACKLIST:M${_user}} ]; then \ - ${ECHO_CMD} "@unexec if ${PW} usershow ${_user} >/dev/null 2>&1; then \ - echo \"==> You should manually remove the \\\"${_user}\\\" user. \"; fi" >> ${TMPPLIST}; \ - fi -.endfor -.endif -.endif -.else - @${DO_NADA} -.endif -.endif - -# PR ports/152498 -# XXX Make sure the commands to create group(s) -# and user(s) are the first in pkg-plist -.if !target(fix-plist-sequence) -fix-plist-sequence: ${TMPPLIST} -.if !defined(WITH_PKGNG) && (defined(GROUPS) || defined(USERS)) - @${ECHO_CMD} "===> Correct pkg-plist sequence to create group(s) and user(s)" - @${EGREP} -e '^@exec echo.*Creating users and' -e '^@exec.*${PW}' -e '^@exec ${INSTALL} -d -g' ${TMPPLIST} > ${TMPGUCMD} - @${EGREP} -v -e '^@exec echo.*Creating users and' -e '^@exec.*${PW}' -e '^@exec ${INSTALL} -d -g' ${TMPPLIST} >> ${TMPGUCMD} - @${MV} -f ${TMPGUCMD} ${TMPPLIST} -.endif -.endif - -.if !defined(DISABLE_SECURITY_CHECK) -.if !target(security-check) -security-check: -# Scan PLIST for: -# 1. setugid files -# 2. accept()/recvfrom() which indicates network listening capability -# 3. insecure functions (gets/mktemp/tempnam/[XXX]) -# 4. startup scripts, in conjunction with 2. -# 5. world-writable files/dirs -# - -@${RM} -f ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable ${WRKDIR}/.PLIST.objdump; \ - ${AWK} -v prefix='${PREFIX}' ' \ - match($$0, /^@cwd /) { prefix = substr($$0, RSTART + RLENGTH); if (prefix == "/") prefix=""; next; } \ - /^@/ { next; } \ - /^\// { print; next; } \ - { print prefix "/" $$0; } \ - ' ${TMPPLIST} > ${WRKDIR}/.PLIST.flattened; \ - ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \ - | ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) 2> /dev/null > ${WRKDIR}/.PLIST.setuid; \ - ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \ - | ${XARGS} -0 -J % ${FIND} % -prune -perm -0002 \! -type l 2> /dev/null > ${WRKDIR}/.PLIST.writable; \ - ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \ - | ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f -print0 2> /dev/null \ - | ${XARGS} -0 -n 1 ${OBJDUMP} -R 2> /dev/null > ${WRKDIR}/.PLIST.objdump; \ - if \ - ! ${AWK} -v audit="$${PORTS_AUDIT}" -f ${PORTSDIR}/Tools/scripts/security-check.awk \ - ${WRKDIR}/.PLIST.flattened ${WRKDIR}/.PLIST.objdump ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable; \ - then \ - www_site=$$(cd ${.CURDIR} && ${MAKE} www-site); \ - if [ ! -z "$${www_site}" ]; then \ - ${ECHO_MSG}; \ - ${ECHO_MSG} " For more information, and contact details about the security"; \ - ${ECHO_MSG} " status of this software, see the following webpage: "; \ - ${ECHO_MSG} "$${www_site}"; \ - fi; \ - fi -.endif -.else # i.e. defined(DISABLE_SECURITY_CHECK) -security-check: - @${ECHO_MSG} " WARNING: Security check has been disabled." -.endif # !defined(DISABLE_SECURITY_CHECK) - -################################################################ -# Skeleton targets start here -# -# You shouldn't have to change these. Either add the pre-* or -# post-* targets/scripts or redefine the do-* targets. These -# targets don't do anything other than checking for cookies and -# call the necessary targets/scripts. -################################################################ - -# Please note that the order of the following targets is important, and -# should not be modified. - -.if defined(CHROOTED) -_CHROOT_SEQ= post-chroot -.else -_CHROOT_SEQ= -.endif -_SANITY_SEQ= ${_CHROOT_SEQ} pre-everything check-makefile \ - check-categories check-makevars check-desktop-entries \ - check-depends identify-install-conflicts check-deprecated \ - check-vulnerable check-license check-config buildanyway-message \ - options-message - -_PKG_DEP= check-sanity -_PKG_SEQ= pkg-depends -_FETCH_DEP= pkg -_FETCH_SEQ= fetch-depends pre-fetch pre-fetch-script \ - do-fetch fetch-specials post-fetch post-fetch-script -_EXTRACT_DEP= fetch -_EXTRACT_SEQ= check-build-conflicts extract-message checksum extract-depends \ - pre-extract pre-extract-script do-extract \ - post-extract post-extract-script -_PATCH_DEP= extract -_PATCH_SEQ= ask-license patch-message patch-depends patch-dos2unix pre-patch \ - pre-patch-script do-patch post-patch post-patch-script -_CONFIGURE_DEP= patch -_CONFIGURE_SEQ= build-depends lib-depends configure-message run-autotools-fixup \ - configure-autotools pre-configure pre-configure-script \ - run-autotools do-configure post-configure post-configure-script -_BUILD_DEP= configure -_BUILD_SEQ= build-message pre-build pre-build-script do-build \ - post-build post-build-script -.if !defined(NO_STAGE) - -_STAGE_DEP= build -_STAGE_SEQ= stage-message stage-dir run-depends lib-depends apply-slist pre-install generate-plist \ - pre-su-install -.if defined(NEED_ROOT) -_STAGE_SUSEQ= create-users-groups do-install post-install post-install-script post-stage compress-man \ - install-rc-script install-ldconfig-file install-license \ - install-desktop-entries add-plist-info add-plist-docs add-plist-examples \ - add-plist-data add-plist-post fix-plist-sequence -.if defined(DEVELOPER) -_STAGE_SUSEQ+= stage-qa -.endif -.else -_STAGE_SEQ+= create-users-groups do-install post-install post-install-script post-stage compress-man \ - install-rc-script install-ldconfig-file install-license \ - install-desktop-entries add-plist-info add-plist-docs add-plist-examples \ - add-plist-data add-plist-post fix-plist-sequence -.if defined(DEVELOPER) -_STAGE_SEQ+= stage-qa -.endif -.endif -.if defined(WITH_PKGNG) -_INSTALL_DEP= stage -_INSTALL_SEQ= install-message run-depends lib-depends check-already-installed -_INSTALL_SUSEQ= fake-pkg security-check - -_PACKAGE_DEP= stage -_PACKAGE_SEQ= package-message pre-package pre-package-script do-package post-package-script - -.else # pkg_install - -_PACKAGE_DEP= stage -_PACKAGE_SEQ= package-message pre-package pre-package-script do-package post-package-script - -_INSTALL_DEP= package -_INSTALL_SEQ= install-message run-depends lib-depends check-already-installed -_INSTALL_SUSEQ= install-package security-check -.endif - -.else # NO_STAGE - -_INSTALL_DEP= build -_INSTALL_SEQ= install-message check-install-conflicts run-depends lib-depends apply-slist pre-install \ - pre-install-script generate-plist check-already-installed -_INSTALL_SUSEQ= check-umask install-mtree pre-su-install \ - pre-su-install-script create-users-groups do-install \ - install-desktop-entries install-license install-rc-script \ - post-install post-install-script add-plist-buildinfo \ - add-plist-info add-plist-docs add-plist-examples \ - add-plist-data add-plist-post fix-plist-sequence \ - compress-man install-ldconfig-file fake-pkg security-check -_PACKAGE_DEP= install -_PACKAGE_SEQ= package-message pre-package pre-package-script \ - do-package post-package-script -.endif - -.if !target(post-chroot) -post-chroot: - @${DO_NADA} -.endif - -.if !target(check-sanity) -check-sanity: ${_SANITY_SEQ} -.endif - -# XXX MCL might need to move in loop below? -.if !target(fetch) -fetch: ${_FETCH_DEP} ${_FETCH_SEQ} -.endif - -.if !target(pkg) -pkg: ${_PKG_DEP} ${_PKG_SEQ} -.endif - -# Main logic. The loop generates 7 main targets and using cookies -# ensures that those already completed are skipped. - -.for target in extract patch configure build stage install package - -.if !target(${target}) && defined(_OPTIONS_OK) -${target}: ${${target:U}_COOKIE} -.elif !target(${target}) -${target}: config-conditional - @cd ${.CURDIR} && ${MAKE} CONFIG_DONE_${UNIQUENAME:U}=1 ${${target:U}_COOKIE} -.elif target(${target}) && defined(IGNORE) -.endif - -.if !exists(${${target:U}_COOKIE}) - -.if ${UID} != 0 && defined(_${target:U}_SUSEQ) && !defined(INSTALL_AS_USER) -.if defined(USE_SUBMAKE) -${${target:U}_COOKIE}: ${_${target:U}_DEP} - @cd ${.CURDIR} && ${MAKE} ${_${target:U}_SEQ} -.else -${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ} -.endif - @${ECHO_MSG} "===> Switching to root credentials for '${target}' target" - @cd ${.CURDIR} && \ - ${SU_CMD} "${MAKE} ${_${target:U}_SUSEQ}" - @${ECHO_MSG} "===> Returning to user credentials" - @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} -.elif defined(USE_SUBMAKE) -${${target:U}_COOKIE}: ${_${target:U}_DEP} - @cd ${.CURDIR} && \ - ${MAKE} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ} - @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} -.else -${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ} - @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} -.endif - -.else -${${target:U}_COOKIE}:: - @if [ -e ${.TARGET} ]; then \ - ${DO_NADA}; \ - else \ - cd ${.CURDIR} && ${MAKE} ${.TARGET}; \ - fi -.endif - -.endfor - -# Enforce order for -jN builds - -.ORDER: ${_SANITY_SEQ} -.ORDER: ${_PKG_DEP} ${_PKG_SEQ} -.ORDER: ${_FETCH_DEP} ${_FETCH_SEQ} -.ORDER: ${_EXTRACT_DEP} ${_EXTRACT_SEQ} -.ORDER: ${_PATCH_DEP} ${_PATCH_SEQ} -.ORDER: ${_CONFIGURE_DEP} ${_CONFIGURE_SEQ} -.ORDER: ${_BUILD_DEP} ${_BUILD_SEQ} -.if !defined(NO_STAGE) -.ORDER: ${_STAGE_DEP} ${_STAGE_SEQ} -.endif -.ORDER: ${_INSTALL_DEP} ${_INSTALL_SEQ} -.ORDER: ${_PACKAGE_DEP} ${_PACKAGE_SEQ} - -extract-message: - @${ECHO_MSG} "===> Extracting for ${PKGNAME}" -patch-message: - @${ECHO_MSG} "===> Patching for ${PKGNAME}" -configure-message: - @${ECHO_MSG} "===> Configuring for ${PKGNAME}" -build-message: - @${ECHO_MSG} "===> Building for ${PKGNAME}" -stage-message: - @${ECHO_MSG} "===> Staging for ${PKGNAME}" -install-message: - @${ECHO_MSG} "===> Installing for ${PKGNAME}" -package-message: - @${ECHO_MSG} "===> Building package for ${PKGNAME}" - -# Empty pre-* and post-* targets - -.for stage in pre post -.for name in pkg check-sanity fetch extract patch configure build stage install package - -.if !target(${stage}-${name}) -${stage}-${name}: - @${DO_NADA} -.endif - -.if !target(${stage}-${name}-script) -${stage}-${name}-script: - @if [ -f ${SCRIPTDIR}/${.TARGET:S/-script$//} ]; then \ - cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ - ${SCRIPTDIR}/${.TARGET:S/-script$//}; \ - fi -.endif - -.endfor -.endfor - -# Special cases for su -.if !target(pre-su-install) -pre-su-install: - @${DO_NADA} -.endif - -.if !target(pre-su-install-script) -pre-su-install-script: - @${DO_NADA} -.endif - - -.if !target(pretty-print-www-site) -pretty-print-www-site: - @www_site=$$(cd ${.CURDIR} && ${MAKE} www-site); \ - if [ -n "$${www_site}" ]; then \ - ${ECHO_MSG} -n " and/or visit the "; \ - ${ECHO_MSG} -n "<a href=\"$${www_site}\">web site</a>"; \ - ${ECHO_MSG} " for further information"; \ - fi -.endif - -################################################################ -# Some more targets supplied for users' convenience -################################################################ - -# Checkpatch -# -# Special target to verify patches - -.if !target(checkpatch) -checkpatch: - @cd ${.CURDIR} && ${MAKE} PATCH_CHECK_ONLY=yes ${_PATCH_DEP} ${_PATCH_SEQ} -.endif - -# Reinstall -# -# Special target to re-run install - -.if !target(reinstall) -reinstall: - @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} - @cd ${.CURDIR} && DEPENDS_TARGET="${DEPENDS_TARGET}" ${MAKE} -DFORCE_PKG_REGISTER install -.endif - -.if !target(restage) -restage: - @${RM} -rf ${STAGEDIR} ${STAGE_COOKIE} ${INSTALL_COOKIE} ${PACKAGE_COOKIE} - @cd ${.CURDIR} && ${MAKE} stage -.endif - -# Deinstall -# -# Special target to remove installation - -.if !target(deinstall) -deinstall: -.if ${UID} != 0 && !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target" - @cd ${.CURDIR} && \ - ${SU_CMD} "${MAKE} ${.TARGET}" - @${ECHO_MSG} "===> Returning to user credentials" -.else - @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}" - @found_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \ - for p in $${found_names}; do \ - check_name=`${ECHO_CMD} $${p} | ${SED} -e 's/-[^-]*$$//'`; \ - if [ "$${check_name}" = "${PKGBASE}" ]; then \ - prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \ - if [ "x${PREFIX}" = "x$${prfx}" ]; then \ - ${ECHO_MSG} "===> Deinstalling $${p}"; \ - ${PKG_DELETE} -f $${p}; \ - else \ - ${ECHO_MSG} "===> $${p} has a different PREFIX: $${prfx}, skipping"; \ - fi; \ - fi; \ - done; \ - if [ -z "$${found_names}" ]; then \ - ${ECHO_MSG} "===> ${PKGBASE} not installed, skipping"; \ - fi - @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} -.endif -.endif - -# Deinstall-all -# -# Special target to remove installation of all ports of the same origin - -.if !target(deinstall-all) -deinstall-all: -.if ${UID} != 0 && !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target" - @cd ${.CURDIR} && \ - ${SU_CMD} "${MAKE} ${.TARGET}" - @${ECHO_MSG} "===> Returning to user credentials" -.else - @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}" - @deinstall_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \ - for oldpkgorigin in $$(${GREP} "|${PKGORIGIN}|" ${PORTSDIR}/MOVED | ${CUT} -f 1 -d '|' | ${SORT} -u); do \ - deinstall_names="$${deinstall_names} $$(${PKG_INFO} -q -O $${oldpkgorigin})"; \ - done; \ - if [ -n "$${deinstall_names}" ]; then \ - for d in $${deinstall_names}; do \ - ${ECHO_MSG} "===> Deinstalling $${d}"; \ - ${PKG_DELETE} -f $${d}; \ - done; \ - else \ - ${ECHO_MSG} "===> ${PKGORIGIN} not installed, skipping"; \ - fi; \ - ${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} -.endif -.endif - -# Cleaning up - -.if !target(do-clean) -do-clean: -.if !defined(NO_STAGE) && defined(NEED_ROOT) && ${UID} != 0 && !defined(INSTALL_AS_USER) && exists(${STAGE_COOKIE}) - @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target" - @cd ${.CURDIR} && \ - ${SU_CMD} "${MAKE} ${.TARGET}" - @${ECHO_MSG} "===> Returning to user credentials" -.else - @if [ -d ${WRKDIR} ]; then \ - if [ -w ${WRKDIR} ]; then \ - ${RM} -rf ${WRKDIR}; \ - else \ - ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \ - fi; \ - fi -.endif -.endif - -.if !target(clean) -clean: -.if !defined(NOCLEANDEPENDS) - @cd ${.CURDIR} && ${MAKE} limited-clean-depends -.endif - @${ECHO_MSG} "===> Cleaning for ${PKGNAME}" -.if target(pre-clean) - @cd ${.CURDIR} && ${MAKE} pre-clean -.endif - @cd ${.CURDIR} && ${MAKE} do-clean -.if target(post-clean) - @cd ${.CURDIR} && ${MAKE} post-clean -.endif -.endif - -.if !target(pre-distclean) -pre-distclean: - @${DO_NADA} -.endif - -.if !target(distclean) -distclean: pre-distclean clean - @cd ${.CURDIR} && ${MAKE} delete-distfiles RESTRICTED_FILES="${_DISTFILES} ${_PATCHFILES}" -.endif - -.if !target(delete-distfiles) -delete-distfiles: - @${ECHO_MSG} "===> Deleting distfiles for ${PKGNAME}" - @(if [ "X${RESTRICTED_FILES}" != "X" -a -d ${_DISTDIR} ]; then \ - cd ${_DISTDIR}; \ - for file in ${RESTRICTED_FILES}; do \ - ${RM} -f $${file}; \ - dir=$${file%/*}; \ - if [ "$${dir}" != "$${file}" ]; then \ - ${RMDIR} -p $${dir} >/dev/null 2>&1 || :; \ - fi; \ - done; \ - fi) -.if defined(DIST_SUBDIR) - -@${RMDIR} ${_DISTDIR} >/dev/null 2>&1 || ${TRUE} -.endif -.endif - -.if !target(delete-distfiles-list) -delete-distfiles-list: - @${ECHO_CMD} "# ${PKGNAME}" - @if [ "X${RESTRICTED_FILES}" != "X" ]; then \ - for file in ${RESTRICTED_FILES}; do \ - ${ECHO_CMD} "[ -f ${_DISTDIR}/$$file ] && (${ECHO_CMD} deleting ${_DISTDIR}/$$file; ${RM} -f ${_DISTDIR}/$$file)"; \ - dir=$${file%/*}; \ - if [ "$${dir}" != "$${file}" ]; then \ - ${ECHO_CMD} "(cd ${_DISTDIR} && ${RMDIR} -p $${dir} 2>/dev/null)"; \ - fi; \ - done; \ - fi -.if defined(DIST_SUBDIR) - @${ECHO_CMD} "${RMDIR} ${_DISTDIR} 2>/dev/null || ${TRUE}" -.endif -.endif - -# Prints out a list of files to fetch (useful to do a batch fetch) - -.if !target(fetch-list) -fetch-list: - @${MKDIR} ${_DISTDIR} - @(cd ${_DISTDIR}; \ - ${_MASTER_SITES_ENV} ; \ - for _file in ${DISTFILES}; do \ - file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ - select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ - if [ ! -f $$file -a ! -f $${file##*/} ]; then \ - if [ ! -z "$$select" ] ; then \ - __MASTER_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \ - eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \ - __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \ - fi; \ - done; \ - ___MASTER_SITES_TMP= ; \ - SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \ - fi; \ - for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ - if [ ! -z "`${ECHO_CMD} ${NOFETCHFILES} | ${GREP} -w $${file}`" ]; then \ - if [ -z "`${ECHO_CMD} ${MASTER_SITE_OVERRIDE} | ${GREP} -w $${site}`" ]; then \ - continue; \ - fi; \ - fi; \ - DIR=${DIST_SUBDIR};\ - CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ - case $${file} in \ - */*) args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - ${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \ - done; \ - ${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \ - fi; \ - done) -.if defined(PATCHFILES) - @(cd ${_DISTDIR}; \ - ${_PATCH_SITES_ENV} ; \ - for _file in ${PATCHFILES}; do \ - file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^-:][^:]*$$//'` ; \ - select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ - file=`${ECHO_CMD} $$file | ${SED} -E -e 's/:-[^:]+$$//'` ; \ - if [ ! -f $$file -a ! -f $${file##*/} ]; then \ - if [ ! -z "$$select" ] ; then \ - __PATCH_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \ - eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \ - __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \ - fi; \ - done; \ - ___PATCH_SITES_TMP= ; \ - SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \ - fi; \ - for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ - CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ - case $${file} in \ - */*) args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - ${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \ - done; \ - ${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \ - fi; \ - done) -.endif -.endif - -.if !target(fetch-url-list-int) -fetch-url-list-int: - @${MKDIR} ${_DISTDIR} - @(cd ${_DISTDIR}; \ - ${_MASTER_SITES_ENV}; \ - for _file in ${DISTFILES}; do \ - file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ - fileptn=`${ECHO_CMD} $$file | ${SED} 's|/|\\\\/|g;s/\./\\\\./g;s/\+/\\\\+/g;s/\?/\\\\?/g'` ; \ - select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ - if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f $${file##*/} ]; then \ - if [ ! -z "$$select" ] ; then \ - __MASTER_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \ - eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \ - __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \ - fi \ - done; \ - ___MASTER_SITES_TMP= ; \ - SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \ - fi ; \ - for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ - case $${file} in \ - */*) args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - ${ECHO_CMD} $${args} ; \ - done; \ - fi \ - done) -.if defined(PATCHFILES) - @(cd ${_DISTDIR}; \ - ${_PATCH_SITES_ENV} ; \ - for _file in ${PATCHFILES}; do \ - file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^-:][^:]*$$//'` ; \ - select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ - file=`${ECHO_CMD} $$file | ${SED} -E -e 's/:-[^:]+$$//'` ; \ - fileptn=`${ECHO_CMD} $$file | ${SED} 's|/|\\\\/|g;s/\./\\\\./g;s/\+/\\\\+/g;s/\?/\\\\?/g'` ; \ - if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f $${file##*/} ]; then \ - if [ ! -z "$$select" ] ; then \ - __PATCH_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \ - eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \ - __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \ - fi \ - done; \ - ___PATCH_SITES_TMP= ; \ - SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \ - fi ; \ - for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ - case $${file} in \ - */*) args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - ${ECHO_CMD} $${args} ; \ - done; \ - fi \ - done) -.endif -.endif - -.if !target(fetch-urlall-list) -fetch-urlall-list: - @cd ${.CURDIR} && LISTALL=yes ${MAKE} fetch-url-list-int -.endif - -.if !target(fetch-url-list) -fetch-url-list: - @cd ${.CURDIR} && ${MAKE} fetch-url-list-int -.endif - -# Generates patches. - -update-patches: - @toedit=`PATCH_WRKSRC=${PATCH_WRKSRC} \ - PATCHDIR=${PATCHDIR} \ - PATCH_LIST=${PATCHDIR}/patch-* \ - DIFF_ARGS=${DIFF_ARGS} \ - DISTORIG=${DISTORIG} \ - ${SH} ${PORTSDIR}/Tools/scripts/update-patches`; \ - case $$toedit in "");; \ - *) ${ECHO_CMD} -n 'edit patches: '; read i; \ - cd ${PATCHDIR} && $${VISUAL:-$${EDIT:-/usr/bin/vi}} $$toedit;; esac - -# Checksumming utilities - -check-checksum-algorithms: - @ \ - ${checksum_init} \ - \ - for alg in ${CHECKSUM_ALGORITHMS:U}; do \ - eval alg_executable=\$$$$alg; \ - if [ -z "$$alg_executable" ]; then \ - ${ECHO_MSG} "Checksum algorithm $$alg: Couldn't find the executable."; \ - ${ECHO_MSG} "Set $$alg=/path/to/$$alg in /etc/make.conf and try again."; \ - exit 1; \ - fi; \ - done; \ - -checksum_init=\ - SHA256=${SHA256}; - -.if !target(makesum) -makesum: check-checksum-algorithms - @cd ${.CURDIR} && ${MAKE} fetch NO_CHECKSUM=yes \ - DISABLE_SIZE=yes - @if [ -f ${DISTINFO_FILE} ]; then ${CAT} /dev/null > ${DISTINFO_FILE}; fi - @( \ - cd ${DISTDIR}; \ - \ - ${checksum_init} \ - \ - for file in ${_CKSUMFILES}; do \ - for alg in ${CHECKSUM_ALGORITHMS:U}; do \ - eval alg_executable=\$$$$alg; \ - \ - if [ $$alg_executable != "NO" ]; then \ - $$alg_executable $$file >> ${DISTINFO_FILE}; \ - fi; \ - done; \ - ${ECHO_CMD} "SIZE ($$file) = `${STAT} -f \"%z\" $$file`" >> ${DISTINFO_FILE}; \ - done \ - ) - @for file in ${_IGNOREFILES}; do \ - for alg in ${CHECKSUM_ALGORITHMS:U}; do \ - ${ECHO_CMD} "$$alg ($$file) = IGNORE" >> ${DISTINFO_FILE}; \ - done; \ - done -.endif - -.if !target(checksum) -checksum: fetch check-checksum-algorithms - @set -e ; \ - ${checksum_init} \ - if [ -f ${DISTINFO_FILE} ]; then \ - cd ${DISTDIR}; OK="";\ - for file in ${_CKSUMFILES}; do \ - ignored="true"; \ - _file=$${file#${DIST_SUBDIR}/*}; \ - for alg in ${CHECKSUM_ALGORITHMS:U}; do \ - ignore="false"; \ - eval alg_executable=\$$$$alg; \ - \ - if [ $$alg_executable != "NO" ]; then \ - MKSUM=`$$alg_executable < $$file`; \ - CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \ - else \ - ignore="true"; \ - fi; \ - \ - if [ $$ignore = "false" -a -z "$$CKSUM" ]; then \ - ${ECHO_MSG} "=> No $$alg checksum recorded for $$file."; \ - ignore="true"; \ - fi; \ - \ - if [ "$$CKSUM" = "IGNORE" ]; then \ - ${ECHO_MSG} "=> $$alg Checksum for $$file is set to IGNORE in distinfo file even though"; \ - ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \ - ignore="true"; \ - OK=${FALSE}; \ - fi; \ - \ - if [ $$ignore = "false" ]; then \ - match="false"; \ - for chksum in $$CKSUM; do \ - if [ "$$chksum" = "$$MKSUM" ]; then \ - match="true"; \ - break; \ - fi; \ - done; \ - if [ $$match = "true" ]; then \ - ${ECHO_MSG} "=> $$alg Checksum OK for $$file."; \ - ignored="false"; \ - else \ - ${ECHO_MSG} "=> $$alg Checksum mismatch for $$file."; \ - refetchlist="$$refetchlist$$file "; \ - OK="$${OK:-retry}"; \ - [ "$${OK}" = "retry" -a ${FETCH_REGET} -gt 0 ] && ${RM} -f $${file}; \ - ignored="false"; \ - fi; \ - fi; \ - done; \ - \ - if [ $$ignored = "true" ]; then \ - ${ECHO_MSG} "=> No suitable checksum found for $$file."; \ - OK="${FALSE}"; \ - fi; \ - \ - done; \ - \ - for file in ${_IGNOREFILES}; do \ - _file=$${file#${DIST_SUBDIR}/*}; \ - ignored="true"; \ - alreadymatched="false"; \ - for alg in ${CHECKSUM_ALGORITHMS:U}; do \ - ignore="false"; \ - eval alg_executable=\$$$$alg; \ - \ - if [ $$alg_executable != "NO" ]; then \ - CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \ - else \ - ignore="true"; \ - fi; \ - \ - if [ $$ignore = "false" ]; then \ - if [ -z "$$CKSUM" ]; then \ - ${ECHO_MSG} "=> No $$alg checksum for $$file recorded (expected IGNORE)"; \ - OK="$$alreadymatched"; \ - elif [ $$CKSUM != "IGNORE" ]; then \ - ${ECHO_MSG} "=> $$alg Checksum for $$file is not set to IGNORE in distinfo file even though"; \ - ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \ - OK="false"; \ - else \ - ignored="false"; \ - alreadymatched="true"; \ - fi; \ - fi; \ - done; \ - \ - if ( [ $$ignored = "true" ]) ; then \ - ${ECHO_MSG} "=> No suitable checksum found for $$file."; \ - OK="false"; \ - fi; \ - \ - done; \ - \ - if [ "$${OK:=true}" = "retry" ] && [ ${FETCH_REGET} -gt 0 ]; then \ - ${ECHO_MSG} "===> Refetch for ${FETCH_REGET} more times files: $$refetchlist"; \ - if ( cd ${.CURDIR} && \ - ${MAKE} ${.MAKEFLAGS} FORCE_FETCH="$$refetchlist" FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" fetch); then \ - if ( cd ${.CURDIR} && \ - ${MAKE} ${.MAKEFLAGS} FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" checksum ); then \ - OK="true"; \ - fi; \ - fi; \ - fi; \ - \ - if [ "$$OK" != "true" -a ${FETCH_REGET} -eq 0 ]; then \ - ${ECHO_MSG} "===> Giving up on fetching files: $$refetchlist"; \ - ${ECHO_MSG} "Make sure the Makefile and distinfo file (${DISTINFO_FILE})"; \ - ${ECHO_MSG} "are up to date. If you are absolutely sure you want to override this"; \ - ${ECHO_MSG} "check, type \"make NO_CHECKSUM=yes [other args]\"."; \ - exit 1; \ - fi; \ - if [ "$$OK" != "true" ]; then \ - exit 1; \ - fi; \ - elif [ -n "${_CKSUMFILES:M*}" ]; then \ - ${ECHO_MSG} "=> No checksum file (${DISTINFO_FILE})."; \ - fi -.endif - -################################################################ -# The special package-building targets -# You probably won't need to touch these -################################################################ - -# Nobody should want to override this unless PKGNAME is simply bogus. - -.if !target(package-name) -package-name: - @${ECHO_CMD} ${PKGNAME} -.endif - -# Build a package but don't check the package cookie - -.if !target(repackage) -repackage: pre-repackage package - -pre-repackage: - @${RM} -f ${PACKAGE_COOKIE} -.endif - -# Build a package but don't check the cookie for installation, also don't -# install package cookie - -.if !target(package-noinstall) -package-noinstall: - @${MKDIR} ${WRKDIR} - @cd ${.CURDIR} && ${MAKE} pre-package \ - pre-package-script do-package post-package-script - @${RM} -f ${TMPPLIST} - -@${RMDIR} ${WRKDIR} -.endif - -################################################################ -# Dependency checking -################################################################ - -.if !target(depends) -depends: pkg-depends extract-depends patch-depends lib-depends fetch-depends build-depends run-depends - -.if defined(ALWAYS_BUILD_DEPENDS) -_DEPEND_ALWAYS= 1 -.else -_DEPEND_ALWAYS= 0 -.endif - -_INSTALL_DEPENDS= \ - if [ -n "${USE_PACKAGE_DEPENDS}" -o -n "${USE_PACKAGE_DEPENDS_ONLY}" ]; then \ - subpkgfile=`(cd $$dir; ${MAKE} $$depends_args -V PKGFILE)`; \ - subpkgname=$${subpkgfile%-*} ; \ - subpkgname=$${subpkgname\#\#*/} ; \ - if [ -r "$${subpkgfile}" -a "$$target" = "${DEPENDS_TARGET}" ]; then \ - ${ECHO_MSG} "===> Installing existing package $${subpkgfile}"; \ - if [ -n "${WITH_PKGNG}" -a $${subpkgname} = "pkg" ]; then \ - [ -d ${WRKDIR} ] || ${MKDIR} ${WRKDIR} ; \ - ${TAR} xf $${subpkgfile} -C ${WRKDIR} -s ",/.*/,,g" "*/pkg-static" ; \ - ${WRKDIR}/pkg-static add $${subpkgfile}; \ - ${RM} -f ${WRKDIR}/pkg-static; \ - else \ - ${PKG_ADD} $${subpkgfile}; \ - fi; \ - elif [ -n "${USE_PACKAGE_DEPENDS_ONLY}" -a "$${target}" = "${DEPENDS_TARGET}" ]; then \ - ${ECHO_MSG} "===> ${PKGNAME} depends on package: $${subpkgfile} - not found"; \ - ${ECHO_MSG} "===> USE_PACKAGE_DEPENDS_ONLY set - not building missing dependency from source"; \ - exit 1; \ - else \ - (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \ - fi; \ - else \ - (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \ - fi; \ - ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; - -.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN -${deptype:L}-depends: -.if defined(${deptype}_DEPENDS) -.if !defined(NO_DEPENDS) - @set -e ; for i in `${ECHO_CMD} "${${deptype}_DEPENDS}"`; do \ - prog=$${i%%:*}; \ - if [ -z "$$prog" ]; then \ - ${ECHO_MSG} "Error: there is an empty port dependency in ${deptype}_DEPENDS."; \ - break; \ - fi; \ - dir=`${ECHO_CMD} $$i | ${SED} -e 's/[^:]*://'`; \ - if ${EXPR} "$$dir" : '.*:' > /dev/null; then \ - target=$${dir##*:}; \ - dir=$${dir%%:*}; \ - if [ X${DEPENDS_PRECLEAN} != "X" ]; then \ - target="clean $$target"; \ - depends_args="$$depends_args NOCLEANDEPENDS=yes"; \ - fi; \ - if [ X${DEPENDS_CLEAN} != "X" ]; then \ - target="$$target clean"; \ - depends_args="$$depends_args NOCLEANDEPENDS=yes"; \ - fi; \ - else \ - target="${DEPENDS_TARGET}"; \ - depends_args="${DEPENDS_ARGS}"; \ - fi; \ - if ${EXPR} "$$prog" : \\/ >/dev/null; then \ - if [ -e "$$prog" ]; then \ - if [ "$$prog" = "${NONEXISTENT}" ]; then \ - ${ECHO_MSG} "Error: ${NONEXISTENT} exists. Please remove it, and restart the build."; \ - ${FALSE}; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \ - if [ ${_DEPEND_ALWAYS} = 1 ]; then \ - ${ECHO_MSG} " (but building it anyway)"; \ - notfound=1; \ - else \ - notfound=0; \ - fi; \ - fi; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \ - notfound=1; \ - fi; \ - else \ - case $${prog} in \ - *\>*|*\<*|*=*) pkg=yes;; \ - *) pkg="";; \ - esac; \ - if [ "$$pkg" != "" ]; then \ - if ${PKG_INFO} "$$prog" > /dev/null 2>&1 ; then \ - ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - found"; \ - if [ ${_DEPEND_ALWAYS} = 1 ]; then \ - ${ECHO_MSG} " (but building it anyway)"; \ - notfound=1; \ - else \ - notfound=0; \ - fi; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - not found"; \ - notfound=1; \ - fi; \ - if [ $$notfound != 0 ]; then \ - inverse_dep=`${ECHO_CMD} $$prog | ${SED} \ - -e 's/<=/=gt=/; s/</=ge=/; s/>=/=lt=/; s/>/=le=/' \ - -e 's/=gt=/>/; s/=ge=/>=/; s/=lt=/</; s/=le=/<=/'`; \ - pkg_info=`${PKG_INFO} -E "$$inverse_dep" || ${TRUE}`; \ - if [ "$$pkg_info" != "" ]; then \ - ${ECHO_MSG} "===> Found $$pkg_info, but you need to upgrade to $$prog."; \ - exit 1; \ - fi; \ - fi; \ - elif ${WHICH} "$$prog" > /dev/null 2>&1 ; then \ - ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \ - if [ ${_DEPEND_ALWAYS} = 1 ]; then \ - ${ECHO_MSG} " (but building it anyway)"; \ - notfound=1; \ - else \ - notfound=0; \ - fi; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \ - notfound=1; \ - fi; \ - fi; \ - if [ $$notfound != 0 ]; then \ - ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \ - if [ ! -d "$$dir" ]; then \ - ${ECHO_MSG} " => No directory for $$prog. Skipping.."; \ - else \ - ${_INSTALL_DEPENDS} \ - fi; \ - fi; \ - done -.endif -.else - @${DO_NADA} -.endif -.endfor - -lib-depends: -.if defined(LIB_DEPENDS) && !defined(NO_DEPENDS) - @set -e ; \ - for i in ${LIB_DEPENDS:M*.so*\:*}; do \ - lib=$${i%%:*} ; \ - dir=$${i#*:} ; \ - target="${DEPENDS_TARGET}"; \ - depends_args="${DEPENDS_ARGS}"; \ - ${ECHO_MSG} -n "===> ${PKGNAME} depends on shared library: $${lib}" ; \ - found=0 ; \ - dirs="${LIB_DIRS} `${CAT} ${LOCALBASE}/libdata/ldconfig/* 2>/dev/null || : `" ; \ - for libdir in $$dirs; do \ - test -f $${libdir}/$${lib} || continue; \ - if [ -x /usr/bin/file ]; then \ - _LIB_FILE=`realpath $${libdir}/$${lib}`; \ - [ `file -b -L --mime-type $${_LIB_FILE}` = "application/x-sharedlib" ] || continue ; \ - fi ; \ - found=1 ; \ - ${ECHO_MSG} " - found"; \ - done ; \ - if [ $${found} -eq 0 ]; then \ - ${ECHO_MSG} " - not found"; \ - ${ECHO_MSG} "===> Verifying for $$lib in $$dir"; \ - if [ ! -d "$$dir" ] ; then \ - ${ECHO_MSG} " => No directory for $$lib. Skipping.."; \ - else \ - ${_INSTALL_DEPENDS} \ - fi ; \ - fi ; \ - done - @set -e ; for i in ${LIB_DEPENDS:N*.so*\:*}; do \ - lib=$${i%%:*}; \ - pattern="`${ECHO_CMD} $$lib | ${SED} -E -e 's/\./\\\\./g' -e 's/(\\\\)?\+/\\\\+/g'`"\ - dir=$${i#*:}; \ - target=$${i##*:}; \ - if ${TEST} $$dir = $$target; then \ - target="${DEPENDS_TARGET}"; \ - depends_args="${DEPENDS_ARGS}"; \ - else \ - dir=$${dir%%:*}; \ - fi; \ - ${ECHO_MSG} -n "===> ${PKGNAME} depends on shared library: $$lib"; \ - if ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \ - ${ECHO_MSG} " - found"; \ - if [ ${_DEPEND_ALWAYS} = 1 ]; then \ - ${ECHO_MSG} " (but building it anyway)"; \ - notfound=1; \ - else \ - notfound=0; \ - fi; \ - else \ - ${ECHO_MSG} " - not found"; \ - notfound=1; \ - fi; \ - if [ $$notfound != 0 ]; then \ - ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \ - if [ ! -d "$$dir" ]; then \ - ${ECHO_MSG} " => No directory for $$lib. Skipping.."; \ - else \ - ${_INSTALL_DEPENDS} \ - if ! ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \ - ${ECHO_MSG} "Error: shared library \"$$lib\" does not exist"; \ - ${FALSE}; \ - fi; \ - fi; \ - fi; \ - done -.endif - -.endif - -# Dependency lists: both build and runtime, recursive. Print out directory names. - -_UNIFIED_DEPENDS=${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} -_DEPEND_DIRS= ${_UNIFIED_DEPENDS:C,^[^:]*:([^:]*).*$,\1,} -_DEPEND_SPECIALS= ${_UNIFIED_DEPENDS:M*\:*\:*:C,^[^:]*:([^:]*):.*$,\1,} - -all-depends-list: - @${ALL-DEPENDS-LIST} - -ALL-DEPENDS-LIST= \ - L="${_DEPEND_DIRS}"; \ - checked=""; \ - while [ -n "$$L" ]; do \ - l=""; \ - for d in $$L; do \ - case $$checked in \ - $$d\ *|*\ $$d\ *|*\ $$d) \ - continue;; \ - esac; \ - checked="$$checked $$d"; \ - if [ ! -d $$d ]; then \ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - ${ECHO_CMD} $$d; \ - if ! children=$$(cd $$d && ${MAKE} -V _DEPEND_DIRS); then\ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - for child in $$children; do \ - case "$$checked $$l" in \ - $$child\ *|*\ $$child\ *|*\ $$child) \ - continue;; \ - esac; \ - l="$$l $$child"; \ - done; \ - done; \ - L=$$l; \ - done - -CLEAN-DEPENDS-FULL= \ - L="${_DEPEND_DIRS}"; \ - checked=""; \ - while [ -n "$$L" ]; do \ - l=""; \ - for d in $$L; do \ - case $$checked in \ - $$d\ *|*\ $$d\ *|*\ $$d) \ - continue;; \ - esac; \ - checked="$$checked $$d"; \ - if [ ! -d $$d ]; then \ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - state=0; \ - for child in $$children; do \ - case $$state in \ - 0) \ - if [ -d $$child ]; then \ - ${ECHO_CMD} $$d; \ - fi; \ - state=1;; \ - 1) \ - case "$$checked $$l" in \ - $$child\ *|*\ $$child\ *|*\ $$child) \ - continue;; \ - esac; \ - l="$$l $$child";; \ - esac; \ - done; \ - done; \ - L=$$l; \ - done - -CLEAN-DEPENDS-LIMITED= \ - L="${_DEPEND_DIRS}"; \ - checked=""; \ - while [ -n "$$L" ]; do \ - l=""; \ - for d in $$L; do \ - case $$checked in \ - $$d\ *|*\ $$d\ *|*\ $$d) \ - continue;; \ - esac; \ - checked="$$checked $$d"; \ - if [ ! -d $$d ]; then \ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - state=0; \ - for child in $$children; do \ - case $$state in \ - 0) \ - if [ ! -d $$child ]; then \ - break; \ - fi; \ - state=1; \ - ${ECHO_CMD} $$d;; \ - 1) \ - case "$$checked $$l" in \ - $$child\ *|*\ $$child\ *|*\ $$child) \ - continue;; \ - esac; \ - l="$$l $$child";; \ - esac; \ - done; \ - done; \ - L=$$l; \ - done - -.if !target(clean-depends) -clean-depends: - @for dir in $$(${CLEAN-DEPENDS-FULL}); do \ - (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \ - done -.endif - -.if !target(limited-clean-depends) -limited-clean-depends: - @for dir in $$(${CLEAN-DEPENDS-LIMITED}); do \ - (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \ - done -.endif - -.if !target(deinstall-depends) -deinstall-depends: - @for dir in $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} deinstall); \ - done -.endif - -.if !target(fetch-specials) -fetch-specials: - @${ECHO_MSG} "===> Fetching all distfiles required by ${PKGNAME} for building" - @for dir in ${_DEPEND_SPECIALS}; do \ - (cd $$dir; ${MAKE} fetch); \ - done -.endif - -.if !target(fetch-recursive) -fetch-recursive: - @${ECHO_MSG} "===> Fetching all distfiles for ${PKGNAME} and dependencies" - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} fetch); \ - done -.endif - -.if !target(fetch-recursive-list) -fetch-recursive-list: - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} fetch-list); \ - done -.endif - -# Used by fetch-required and fetch-required list, this script looks -# at each of the dependencies. If 3 items are specified in the tuple, -# such as foo:${PORTSDIR}/graphics/foo:extract, the first item (foo) -# is examined. Only if it begins with a / and does not exist on the -# file-system will ``make targ'' proceed. -# For more usual (dual-item) dependency tuples, the ``make targ'' -# proceeds, if the exact package, which the directory WOULD'VE installed, -# is not yet installed. -# This is the exact behaviour of the old code, and it may need -# revisiting. For example, the entire first case seems dubious, and in -# the second case we, probably, should be satisfied with _any_ (earlier) -# package, with the same origin as that of the dir. -# -# -mi -FETCH_LIST?= for i in $$deps; do \ - prog=$${i%%:*}; dir=$${i\#*:}; \ - case $$dir in \ - *:*) if [ $$prog != $${prog\#/} -o ! -e $$prog ]; then \ - dir=$${dir%%:*}; \ - else \ - continue; \ - fi;; \ - *) if [ -d ${PKG_DBDIR}/$$(cd $$dir; ${MAKE} -V PKGNAME) ]; then \ - continue; \ - fi;; \ - esac; \ - echo cd $$dir; cd $$dir; ${MAKE} $$targ; \ - done - -.if !target(fetch-required) -fetch-required: fetch -.if defined(NO_DEPENDS) - @${ECHO_MSG} "===> NO_DEPENDS is set, not fetching any other distfiles for ${PKGNAME}" -.else - @${ECHO_MSG} "===> Fetching all required distfiles for ${PKGNAME} and dependencies" -.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN -.if defined(${deptype}_DEPENDS) - @targ=fetch; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST} -.endif -.endfor -.endif - -.endif - -.if !target(fetch-required-list) -fetch-required-list: fetch-list -.if !defined(NO_DEPENDS) -.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN -.if defined(${deptype}_DEPENDS) - @targ=fetch-list; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST} -.endif -.endfor -.endif -.endif - -.if !target(checksum-recursive) -checksum-recursive: - @${ECHO_MSG} "===> Fetching and checking checksums for ${PKGNAME} and dependencies" - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} checksum); \ - done -.endif - -# Dependency lists: build and runtime. Print out directory names. - -build-depends-list: -.if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) - @${BUILD-DEPENDS-LIST} -.endif - -BUILD-DEPENDS-LIST= \ - for dir in $$(${ECHO_CMD} "${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${SED} -E -e 's,([^: ]*):([^: ]*)(:[^ ]*)?,\2,g' -e 'y/ /\n/'| ${SORT} -u); do \ - if [ -d $$dir ]; then \ - ${ECHO_CMD} $$dir; \ - else \ - ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ - fi; \ - done | ${SORT} -u - -run-depends-list: -.if defined(LIB_DEPENDS) || defined(RUN_DEPENDS) - @${RUN-DEPENDS-LIST} -.endif - -RUN-DEPENDS-LIST= \ - for dir in $$(${ECHO_CMD} "${_LIB_RUN_DEPENDS:C,.*:([^:]*).*,\1,}" | ${SED} -e 'y/ /\n/' | ${SORT} -u); do \ - if [ -d $$dir ]; then \ - ${ECHO_CMD} $$dir; \ - else \ - ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ - fi; \ - done | ${SORT} -u - -# Package (recursive runtime) dependency list. Print out both directory names -# and package names. - -package-depends-list: -.if defined(CHILD_DEPENDS) || defined(LIB_DEPENDS) || defined(RUN_DEPENDS) - @${PACKAGE-DEPENDS-LIST} -.endif - -_LIB_RUN_DEPENDS= ${LIB_DEPENDS} ${RUN_DEPENDS} -PACKAGE-DEPENDS-LIST?= \ - if [ "${CHILD_DEPENDS}" ]; then \ - installed=$$(${PKG_INFO} -qO ${PKGORIGIN} 2>/dev/null || \ - ${TRUE}); \ - if [ "$$installed" ]; then \ - break; \ - fi; \ - if [ -z "$$installed" ]; then \ - installed="${PKGNAME}"; \ - fi; \ - for pkgname in $$installed; do \ - ${ECHO_CMD} "$$pkgname ${.CURDIR} ${PKGORIGIN}"; \ - done; \ - fi; \ - checked="${PARENT_CHECKED}"; \ - for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \ - dir=$$(${REALPATH} $$dir); \ - if [ -d $$dir ]; then \ - case $$checked in \ - $$dir|$$dir\ *|*\ $$dir|*\ $$dir\ *) continue;; \ - esac; \ - childout=$$(cd $$dir; ${MAKE} CHILD_DEPENDS=yes PARENT_CHECKED="$$checked" package-depends-list); \ - set -- $$childout; \ - childdir=""; \ - while [ $$\# != 0 ]; do \ - childdir="$$childdir $$2"; \ - ${ECHO_CMD} "$$1 $$2 $$3"; \ - shift 3; \ - done; \ - checked="$$dir $$childdir $$checked"; \ - else \ - ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ - fi; \ - done - -ACTUAL-PACKAGE-DEPENDS?= \ - if [ "${_LIB_RUN_DEPENDS}" != " " ]; then \ - origins=$$(for pkgname in ${PKG_DBDIR}/*; do \ - if [ -e $$pkgname/+CONTENTS ]; then \ - ${ECHO_CMD} $${pkgname\#\#*/}; \ - ${SED} -n -e "s/@comment ORIGIN://p" $$pkgname/+CONTENTS; \ - fi; \ - done); \ - for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \ - tmp=$${dir\#${PORTSDIR}/}; \ - if [ "$$tmp" = "$$dir" ]; then \ - tmp=$${dir%/*}; \ - dir=$${tmp\#\#*/}/$${dir\#\#*/}; \ - else \ - dir=$$tmp; \ - fi; \ - set -- $$origins; \ - while [ $$\# -gt 1 ]; do \ - if [ ! -d "${PORTSDIR}/$$2" ]; then \ - shift; \ - continue; \ - fi; \ - if [ "$$dir" = "$$2" ]; then \ - ${ECHO_CMD} $$1:$$dir; \ - if [ -e ${PKG_DBDIR}/$$1/+CONTENTS -a -z "${EXPLICIT_PACKAGE_DEPENDS}" ]; then \ - packagelist="$$packagelist ${PKG_DBDIR}/$$1/+CONTENTS"; \ - fi; \ - break; \ - fi; \ - shift 2; \ - done; \ - done; \ - [ -z "$$packagelist" ] || ${AWK} -F '( |:)' 'BEGIN { pkgname="broken_contents" } /@pkgdep / { pkgname=$$2 } /@comment DEPORIGIN:/ { printf "%s:%s\n", pkgname, $$3; pkgname="broken_contents" }' $$packagelist; \ - fi - -# Print out package names. - -package-depends: - @${PACKAGE-DEPENDS-LIST} | ${AWK} '{print $$1":"$$3}' - -actual-package-depends: - @${ACTUAL-PACKAGE-DEPENDS} - -# Build packages for port and dependencies - -package-recursive: package - @for dir in $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} package clean); \ - done - -# Show missing dependencies -missing: - @_origins=$$(${PKG_INFO} -aoq); \ - for dir in $$(${ALL-DEPENDS-LIST}); do \ - _origin=$${dir##${PORTSDIR}/}; \ - if ! $$(${ECHO_CMD} $${_origins} | ${GREP} -q $${_origin}); then \ - ${ECHO_CMD} $${_origin}; \ - fi; \ - done - -################################################################ -# Everything after here are internal targets and really -# shouldn't be touched by anybody but the release engineers. -################################################################ - -# This target generates an index entry suitable for aggregation into -# a large index. Format is: -# -# distribution-name|port-path|installation-prefix|comment| \ -# description-file|maintainer|categories|extract-depends| \ -# patch-depends|fetch-depends|build-depends|run-depends|www site -# -# If this ever changes, portmgr should contact the portsnap maintainer -# first to avoid gratuitous breakage. - -. if !target(describe) -_EXTRACT_DEPENDS=${EXTRACT_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} -_PATCH_DEPENDS=${PATCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} -_FETCH_DEPENDS=${FETCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} -_LIB_DEPENDS=${LIB_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} -_BUILD_DEPENDS=${BUILD_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS} -_RUN_DEPENDS=${RUN_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS} -. if exists(${DESCR}) -_DESCR=${DESCR} -. else -_DESCR=/dev/null -. endif - -. if defined(BUILDING_INDEX) && defined(INDEX_PORTS) -INDEX_OUT=${INDEX_TMPDIR}/${INDEXFILE}.desc.aggr -. else -INDEX_OUT=/dev/stdout -. endif - -describe: - @(${ECHO_CMD} -n "${PKGNAME}|${.CURDIR}|${PREFIX}|"; \ - ${ECHO_CMD} -n ${COMMENT:Q}; \ - ${ECHO_CMD} -n "|${_DESCR}|${MAINTAINER}|${CATEGORIES}|${_EXTRACT_DEPENDS}|${_PATCH_DEPENDS}|${_FETCH_DEPENDS}|${_BUILD_DEPENDS:O:u}|${_RUN_DEPENDS:O:u}|"; \ - while read one two discard; do \ - case "$$one" in \ - WWW:) case "$$two" in \ - https://*|http://*|ftp://*) ${ECHO_CMD} -n "$$two" ;; \ - *) ${ECHO_CMD} -n "http://$$two" ;; \ - esac; \ - break; \ - ;; \ - esac; \ - done < ${DESCR}; ${ECHO_CMD}) >>${INDEX_OUT} -. endif - -www-site: -.if exists(${DESCR}) - @${AWK} '$$1 ~ /^WWW:/ {print $$2}' ${DESCR} | ${HEAD} -1 -.else - @${ECHO_CMD} -.endif - -.if !target(readmes) -readmes: readme -.endif - -.if !target(readme) -readme: - @${RM} -f ${.CURDIR}/README.html - @cd ${.CURDIR} && ${MAKE} ${.CURDIR}/README.html -.endif - -${.CURDIR}/README.html: - @${ECHO_MSG} "===> Creating README.html for ${PKGNAME}" - @${SED} -e 's|%%PORT%%|'$$(${ECHO_CMD} ${.CURDIR} | \ - ${SED} -e 's|.*/\([^/]*/[^/]*\)$$|\1|')'|g' \ - -e 's|%%PKG%%|${PKGNAME}|g' \ - -e 's|%%COMMENT%%|'"$$(${ECHO_CMD} ${COMMENT:Q})"'|' \ - -e '/%%COMMENT%%/d' \ - -e 's|%%DESCR%%|'"$$(${ECHO_CMD} ${DESCR} | \ - ${SED} -e 's|${.CURDIR}/||')"'|' \ - -e 's|%%EMAIL%%|'"$$(${ECHO_CMD} "${MAINTAINER}" | \ - ${SED} -e 's/([^)]*)//;s/.*<//;s/>.*//')"'|g' \ - -e 's|%%MAINTAINER%%|${MAINTAINER}|g' \ - -e 's|%%WEBSITE%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-www-site)"'|' \ - -e 's|%%BUILD_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-build-depends-list)"'|' \ - -e 's|%%RUN_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-run-depends-list)"'|' \ - -e 's|%%TOP%%|'"$$(${ECHO_CMD} ${CATEGORIES} | \ - ${SED} -e 's| .*||' -e 's|[^/]*|..|g')"'/..|' \ - ${TEMPLATES}/README.port >> ${.TARGET} - -# The following two targets require an up-to-date INDEX in ${PORTSDIR} - -_PRETTY_PRINT_DEPENDS_LIST=\ - if [ ! -r ${INDEXDIR}/${INDEXFILE} ] ; then \ - ${ECHO_MSG} "${.TARGET} requires an INDEX file (${INDEXFILE}). Please run make index or make fetchindex."; \ - else \ - target=${.TARGET:C/pretty-print-(.*)-depends-list/\1/} ; \ - if [ "$$target" = "build" ] ; then fldnum=8 ; else fldnum=9 ; fi; \ - ${ECHO_MSG} -n 'This port requires package(s) "' ; \ - ${ECHO_MSG} -n `${AWK} -F\| "\\$$1 ~ /^${PKGNAME}/ {print \\$$$${fldnum};}" ${INDEXDIR}/${INDEXFILE}` ; \ - ${ECHO_MSG} "\" to $$target."; \ - fi; - - -.if !target(pretty-print-build-depends-list) -pretty-print-build-depends-list: -.if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || \ - defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) - @${_PRETTY_PRINT_DEPENDS_LIST} -.endif -.endif - -.if !target(pretty-print-run-depends-list) -pretty-print-run-depends-list: -.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) - @${_PRETTY_PRINT_DEPENDS_LIST} -.endif -.endif - -_SUB_LIST_TEMP= ${SUB_LIST:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -.if !target(apply-slist) -apply-slist: -.if defined(SUB_FILES) -.for file in ${SUB_FILES} -.if !exists(${FILESDIR}/${file}.in) - @${ECHO_MSG} "** Missing ${FILESDIR}/${file}.in for ${PKGNAME}."; exit 1 -.else - @${SED} ${_SUB_LIST_TEMP} -e '/^@comment /d' ${FILESDIR}/${file}.in > ${WRKDIR}/${file} -.endif -.endfor -.for i in pkg-message pkg-install pkg-deinstall pkg-req -.if ${SUB_FILES:M${i}*}!="" -${i:S/-//:U}= ${WRKDIR}/${SUB_FILES:M${i}*} -.endif -.endfor -.endif -.endif - -# Generate packing list. Also tests to make sure all required package -# files exist. - -.if !target(generate-plist) -generate-plist: - @${ECHO_MSG} "===> Generating temporary packing list" - @${MKDIR} `${DIRNAME} ${TMPPLIST}` - @if [ ! -f ${DESCR} ]; then ${ECHO_MSG} "** Missing pkg-descr for ${PKGNAME}."; exit 1; fi -.if defined(NO_STAGE) || defined(NEED_ROOT) - @>${TMPPLIST} -.else - @${ECHO_CMD} -e "@owner root\n@group wheel" >${TMPPLIST} -.endif - @for file in ${PLIST_FILES}; do \ - ${ECHO_CMD} $${file} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} >> ${TMPPLIST}; \ - done -.if defined(NO_STAGE) - @for man in ${__MANPAGES}; do \ - ${ECHO_CMD} $${man} >> ${TMPPLIST}; \ - done -.for _PREFIX in ${PREFIX} -.if ${_TMLINKS:M${_PREFIX}*}x != x - @for i in ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||}; do \ - ${ECHO_CMD} "$$i" >> ${TMPPLIST}; \ - done -.endif -.if ${_TMLINKS:N${_PREFIX}*}x != x - @${ECHO_CMD} @cwd / >> ${TMPPLIST} - @for i in ${_TMLINKS:N${_PREFIX}*:S|^/||}; do \ - ${ECHO_CMD} "$$i" >> ${TMPPLIST}; \ - done - @${ECHO_CMD} '@cwd ${PREFIX}' >> ${TMPPLIST} -.endif -.endfor -.endif - @if [ -f ${PLIST} ]; then \ - ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${PLIST} >> ${TMPPLIST}; \ - fi - -.for dir in ${PLIST_DIRS} - @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrm ,' >> ${TMPPLIST} -.endfor -.for dir in ${PLIST_DIRSTRY} - @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrmtry ,' >> ${TMPPLIST} -.endfor - -.for reinplace in ${PLIST_REINPLACE} -.if defined(PLIST_REINPLACE_${reinplace:U}) - @${SED} -i "" -e '${PLIST_REINPLACE_${reinplace:U}}' ${TMPPLIST} -.endif -.endfor - -.if defined(USE_LINUX_PREFIX) -.if defined(USE_LDCONFIG) - @${ECHO_CMD} "@exec ${LDCONFIG_CMD}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG_CMD}" >> ${TMPPLIST} -.endif -.else -.if defined(USE_LDCONFIG) -.if !defined(INSTALL_AS_USER) - @${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG} -R" >> ${TMPPLIST} -.else - @${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG} || ${TRUE}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG} -R || ${TRUE}" >> ${TMPPLIST} -.endif -.endif -.if defined(USE_LDCONFIG32) -.if !defined(INSTALL_AS_USER) - @${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R" >> ${TMPPLIST} -.else - @${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32} || ${TRUE}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R || ${TRUE}" >> ${TMPPLIST} -.endif -.endif -.endif -.if !defined(WITH_PKGNG) - @cd ${.CURDIR} && { ${MAKE} pretty-print-config | fold -sw 120 | ${SED} -e 's/^/@comment OPTIONS:/'; } >> ${TMPPLIST} -.endif -.endif - -${TMPPLIST}: - @cd ${.CURDIR} && ${MAKE} generate-plist - -${TMPPLIST_SORT}: ${TMPPLIST} - @${SORT} -u ${TMPPLIST} >${TMPPLIST_SORT} - -.if !target(add-plist-docs) -add-plist-docs: -.if defined(PORTDOCS) && !defined(NOPORTDOCS) - @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \ - [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \ - ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ - fi -.for x in ${PORTDOCS} - @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ - if [ ! -e ${STAGEDIR}${DOCSDIR}/${x} ]; then \ - ${ECHO_CMD} ${DOCSDIR_REL}/${x} >> ${TMPPLIST}; \ - fi;fi -.endfor - @${FIND} -P ${PORTDOCS:S/^/${STAGEDIR}${DOCSDIR}\//} ! -type d 2>/dev/null | \ - ${SED} -ne 's,^${STAGEDIR}${PREFIX}/,,p' >> ${TMPPLIST} - @${FIND} -P -d ${PORTDOCS:S/^/${STAGEDIR}${DOCSDIR}\//} -type d 2>/dev/null | \ - ${SED} -ne 's,^${STAGEDIR}${PREFIX}/,@dirrm ,p' >> ${TMPPLIST} - @${ECHO_CMD} "@dirrm ${DOCSDIR_REL}" >> ${TMPPLIST} -.else - @${DO_NADA} -.endif -.endif - -.if !target(add-plist-examples) -add-plist-examples: -.if defined(PORTEXAMPLES) && !defined(NOPORTEXAMPLES) - @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \ - [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \ - ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ - fi -.for x in ${PORTEXAMPLES} - @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ - if [ ! -e ${STAGEDIR}${EXAMPLESDIR}/${x} ]; then \ - ${ECHO_CMD} ${EXAMPLESDIR}/${x} | \ - ${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \ - fi;fi -.endfor - @${FIND} -P ${PORTEXAMPLES:S/^/${STAGEDIR}${EXAMPLESDIR}\//} ! -type d 2>/dev/null | \ - ${SED} -ne 's,^${STAGEDIR}${PREFIX}/,,p' >> ${TMPPLIST} - @${FIND} -P -d ${PORTEXAMPLES:S/^/${STAGEDIR}${EXAMPLESDIR}\//} -type d 2>/dev/null | \ - ${SED} -ne 's,^${STAGEDIR}${PREFIX}/,@dirrm ,p' >> ${TMPPLIST} - @${ECHO_CMD} "@dirrm ${EXAMPLESDIR_REL}" >> ${TMPPLIST} -.else - @${DO_NADA} -.endif -.endif - -.if !target(add-plist-data) -add-plist-data: -.if defined(PORTDATA) && !defined(NOPORTDATA) - @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \ - [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \ - ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ - fi -.for x in ${PORTDATA} - @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ - if [ ! -e ${STAGEDIR}${DATADIR}/${x} ]; then \ - ${ECHO_CMD} ${DATADIR}/${x} | \ - ${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \ - fi;fi -.endfor - @${FIND} -P ${PORTDATA:S/^/${STAGEDIR}${DATADIR}\//} ! -type d 2>/dev/null | \ - ${SED} -ne 's,^${STAGEDIR}${PREFIX}/,,p' >> ${TMPPLIST} - @${FIND} -P -d ${PORTDATA:S/^/${STAGEDIR}${DATADIR}\//} -type d 2>/dev/null | \ - ${SED} -ne 's,^${STAGEDIR}${PREFIX}/,@dirrm ,p' >> ${TMPPLIST} - @${ECHO_CMD} "@dirrm ${DATADIR_REL}" >> ${TMPPLIST} -.else - @${DO_NADA} -.endif -.endif - -.if !target(add-plist-buildinfo) -add-plist-buildinfo: -.if defined(PACKAGE_BUILDING) - @${ECHO_CMD} "@comment Build details: ${BUILDHOST}|${JAIL}|${BUILD}|${PORTSTREE}|${BUILDDATE}" >> ${TMPPLIST} -.endif -.endif - -.if !target(add-plist-info) -add-plist-info: -# Process GNU INFO files at package install/deinstall time -.if defined(INFO) -.for i in ${INFO} -.if defined(NO_STAGE) - install-info --quiet ${PREFIX}/${INFO_PATH}/$i.info ${PREFIX}/${INFO_PATH}/dir -.endif -.if !defined(WITH_PKGNG) - @${ECHO_CMD} "@unexec install-info --quiet --delete %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \ - >> ${TMPPLIST} - @${ECHO_CMD} "@unexec [ \`info -d %D/${INFO_PATH} --output - 2>/dev/null | grep -c '^*'\` -eq 1 ] && rm -f %D/${INFO_PATH}/dir || :"\ - >> ${TMPPLIST} - @${LS} ${STAGEDIR}${PREFIX}/${INFO_PATH}/$i.info* | ${SED} -e s:${STAGEDIR}${PREFIX}/::g >> ${TMPPLIST} - @${ECHO_CMD} "@exec install-info --quiet %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \ - >> ${TMPPLIST} -.else - @${LS} ${STAGEDIR}${PREFIX}/${INFO_PATH}/$i.info* 2>/dev/null | ${SED} -e s:${STAGEDIR}${PREFIX}/:@info\ :g >> ${TMPPLIST} -.endif -.endfor -.if defined(INFO_SUBDIR) -.if !defined(WITH_PKGNG) - @${ECHO_CMD} "@unexec ${RMDIR} %D/${INFO_PATH}/${INFO_SUBDIR} 2> /dev/null || true" >> ${TMPPLIST} -.else - @${ECHO_CMD} "@dirrmtry ${INFO_PATH}/${INFO_SUBDIR}" >> ${TMPPLIST} -.endif -.endif -.if (${PREFIX} != "/usr") - @${ECHO_CMD} "@unexec if [ -f %D/${INFO_PATH}/dir ]; then if sed -e '1,/Menu:/d' %D/${INFO_PATH}/dir | grep -q '^[*] '; then true; else rm %D/${INFO_PATH}/dir; fi; fi" >> ${TMPPLIST} -.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${LINUXBASE}) - @${ECHO_CMD} "@unexec rmdir %D/${INFO_PATH} 2>/dev/null || true" >> ${TMPPLIST} -.endif -.endif -.endif -.endif - -# If we're installing into a non-standard PREFIX, we need to remove that directory at -# deinstall-time -.if !target(add-plist-post) -add-plist-post: -.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${LINUXBASE} && ${PREFIX} != "/usr") - @${ECHO_CMD} "@unexec rmdir %D 2> /dev/null || true" >> ${TMPPLIST} -.else - @${DO_NADA} -.endif -.endif - -.if !target(install-rc-script) -install-rc-script: -.if defined(USE_RCORDER) || defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES" -.if defined(USE_RCORDER) - @${ECHO_MSG} "===> Staging early rc.d startup script(s)" - @${ECHO_CMD} "@cwd /" >> ${TMPPLIST} - @for i in ${USE_RCORDER}; do \ - ${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${STAGEDIR}/etc/rc.d/$${i%.sh}; \ - ${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \ - done - @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST} -.endif -.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES" - @${ECHO_MSG} "===> Staging rc.d startup script(s)" - @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST} - @for i in ${USE_RC_SUBR}; do \ - ${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${STAGEDIR}${PREFIX}/etc/rc.d/$${i%.sh}; \ - ${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \ - done -.endif -.else - @${DO_NADA} -.endif -.endif - -# Compress (or uncompress) and symlink manpages. -.if !target(compress-man) -compress-man: -.if defined(_MANPAGES) || defined(_MLINKS) -.if ${MANCOMPRESSED} == yes && defined(NO_MANCOMPRESS) - @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}" - @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GUNZIP_CMD} $${_manpages} ) || ${TRUE} -.elif ${MANCOMPRESSED} == no && !defined(NO_MANCOMPRESS) - @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}" - @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GZIP_CMD} $${_manpages} ) || ${TRUE} -.endif -.if defined(_MLINKS) - @set -- ${_MLINKS}; \ - while :; do \ - [ $$# -eq 0 ] && break || ${TRUE}; \ - ${RM} -f $${2%.gz}; ${RM} -f $$2.gz; \ - ${LN} -fs `${ECHO_CMD} $$1 $$2 | ${AWK} '{ \ - z=split($$1, a, /\//); x=split($$2, b, /\//); \ - while (a[i] == b[i]) i++; \ - for (q=i; q<x; q++) printf "../"; \ - for (; i<z; i++) printf a[i] "/"; printf a[z]; }'` $$2; \ - shift; shift; \ - done -.endif -.else - @${DO_NADA} -.endif -.endif - -# Fake installation of package so that user can pkg_delete it later. -# Also, make sure that an installed port is recognized correctly in -# accordance to the @pkgdep directive in the packing lists - -.if !target(fake-pkg) -fake-pkg: -.if !defined(NO_PKG_REGISTER) - @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi - @${RM} -f /tmp/${PKGNAME}-required-by -.if defined(FORCE_PKG_REGISTER) - @if [ -e ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY ]; then \ - ${CP} ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY /tmp/${PKGNAME}-required-by; \ - fi - @${RM} -rf ${PKG_DBDIR}/${PKGNAME} -.endif - @if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \ - ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \ - ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \ - ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \ - ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \ - ${ECHO_CMD} ${COMMENT:Q} > ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \ - if [ -f ${PKGINSTALL} ]; then \ - ${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \ - fi; \ - if [ -f ${PKGDEINSTALL} ]; then \ - ${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \ - fi; \ - if [ -f ${PKGREQ} ]; then \ - ${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \ - fi; \ - if [ -f ${PKGMESSAGE} ]; then \ - ${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \ - ${ECHO_CMD} "@display +DISPLAY" >> ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \ - fi; \ - for dep in `${PKG_INFO} -qf ${PKGNAME} | ${AWK} '/^@pkgdep / {print $$2}' | ${SORT} -u`; do \ - if [ -d ${PKG_DBDIR}/$$dep -a -z `${ECHO_CMD} $$dep | ${GREP} -E ${PKG_IGNORE_DEPENDS}` ]; then \ - if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \ - >/dev/null 2>&1; then \ - ${ECHO_CMD} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \ - fi; \ - fi; \ - done; \ - fi -.if !defined(NO_MTREE) - @if [ -f ${MTREE_FILE} ]; then \ - ${CP} ${MTREE_FILE} ${PKG_DBDIR}/${PKGNAME}/+MTREE_DIRS; \ - fi -.endif - @if [ -e /tmp/${PKGNAME}-required-by ]; then \ - ${CAT} /tmp/${PKGNAME}-required-by >> ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY; \ - ${RM} -f /tmp/${PKGNAME}-required-by; \ - fi -.else - @${DO_NADA} -.endif -.endif - -# Depend is generally meaningless for arbitrary ports, but if someone wants -# one they can override this. This is just to catch people who've gotten into -# the habit of typing `make depend all install' as a matter of course. -# -.if !target(depend) -depend: -.endif - -# Same goes for tags -.if !target(tags) -tags: -.endif - -.if !defined(NOPRECIOUSMAKEVARS) -# These won't change, so we can pass them through the environment -.MAKEFLAGS: \ - ARCH="${ARCH:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ - OPSYS="${OPSYS:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ - OSREL="${OSREL:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ - OSVERSION="${OSVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ - SYSTEMVERSION="${SYSTEMVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" -.endif - -.if !target(pre-check-config) -pre-check-config: -.for single in ${OPTIONS_SINGLE} -. for opt in ${OPTIONS_SINGLE_${single}} -. if empty(ALL_OPTIONS:M${single}) || !empty(PORT_OPTIONS:M${single}) -. if !empty(PORT_OPTIONS:M${opt}) -. if defined(OPTFOUND) -OPTIONS_WRONG_SINGLE+= ${single} -. else -OPTFOUND= true -. endif -. endif -. else -# if conditional and if the condition is unchecked, remove opt from the list of -# set options -PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}} -OPTNOCHECK= true -. endif -. endfor -. if !defined(OPTFOUND) && !defined(OPTNOCHECK) -OPTIONS_WRONG_SINGLE+= ${single} -. endif -. undef OPTFOUND -. undef OPTNOCHECK -.endfor -.undef single - -.for radio in ${OPTIONS_RADIO} -. for opt in ${OPTIONS_RADIO_${radio}} -. if !empty(PORT_OPTIONS:M${opt}) -. if defined(OPTFOUND) -OPTIONS_WRONG_RADIO+= ${radio} -. else -OPTFOUND= true -. endif -. endif -. endfor -. undef OPTFOUND -.endfor - -.for multi in ${OPTIONS_MULTI} -. for opt in ${OPTIONS_MULTI_${multi}} -. if empty(ALL_OPTIONS:M${multi}) || !empty(PORT_OPTIONS:M${multi}) -. if !empty(PORT_OPTIONS:M${opt}) -OPTFOUND= true -. endif -. else -# if conditional and if the condition is unchecked, remove opt from the list of -# set options -PORT_OPTIONS:= ${PORT_OPTIONS:N${opt}} -OPTNOCHECK= true -. endif -. endfor -. if !defined(OPTFOUND) && !defined(OPTNOCHECK) -OPTIONS_WRONG_MULTI+= ${multi} -. endif -. undef OPTFOUND -. undef OPTNOCHECK -.endfor -.undef multi -.undef opt -.endif #pre-check-config - -.if !target(_check-config) -_check-config: pre-check-config -.for multi in ${OPTIONS_WRONG_MULTI} - @${ECHO_MSG} "====> You must check at least one option in the ${multi} multi" -.endfor -.for single in ${OPTIONS_WRONG_SINGLE} - @${ECHO_MSG} "====> You must select one and only one option from the ${single} single" -.endfor -.for radio in ${OPTIONS_WRONG_RADIO} - @${ECHO_MSG} "====> You cannot select multiple options from the ${radio} radio" -.endfor -.if !empty(OPTIONS_WRONG_MULTI) || !empty(OPTIONS_WRONG_SINGLE) || !empty(OPTIONS_WRONG_RADIO) -_CHECK_CONFIG_ERROR= true -.endif -.endif # _check-config - -.if !target(check-config) -check-config: _check-config -.if !empty(_CHECK_CONFIG_ERROR) - @exit 1 -.endif -.endif # check-config - -.if !target(sanity-config) -sanity-config: _check-config -.if !empty(_CHECK_CONFIG_ERROR) - @echo -n "Config is invalid. Re-edit? [Y/n] "; \ - read answer; \ - case $$answer in \ - [Nn]|[Nn][Oo]) \ - exit 0; \ - esac; \ - cd ${.CURDIR} && ${MAKE} config -.endif -.endif # sanity-config - -.if !target(pre-config) -pre-config: -D4P_ENV= PKGNAME="${PKGNAME}" \ - PORT_OPTIONS="${PORT_OPTIONS}" \ - ALL_OPTIONS="${ALL_OPTIONS}" \ - OPTIONS_MULTI="${OPTIONS_MULTI}" \ - OPTIONS_SINGLE="${OPTIONS_SINGLE}" \ - OPTIONS_RADIO="${OPTIONS_RADIO}" \ - OPTIONS_GROUP="${OPTIONS_GROUP}" \ - NEW_OPTIONS="${NEW_OPTIONS}" \ - DIALOG4PORTS="${DIALOG4PORTS}" \ - PREFIX="${PREFIX}" \ - LOCALBASE="${LOCALBASE}" \ - PORTSDIR="${PORTSDIR}" \ - MAKE="${MAKE}" \ - D4PHEIGHT="${D4PHEIGHT}" \ - D4PWIDTH="${D4PWIDTH}" \ - D4PFULLSCREEN="${D4PFULLSCREEN}" -.if exists(${PKGHELP}) -D4P_ENV+= PKGHELP="${PKGHELP}" -.endif -.for opt in ${ALL_OPTIONS} -D4P_ENV+= ${opt}_DESC=""${${opt}_DESC:Q}"" -.endfor -.for otype in MULTI GROUP SINGLE RADIO -. for m in ${OPTIONS_${otype}} -D4P_ENV+= OPTIONS_${otype}_${m}="${OPTIONS_${otype}_${m}}" \ - ${m}_DESC=""${${m}_DESC:Q}"" -. for opt in ${OPTIONS_${otype}_${m}} -D4P_ENV+= ${opt}_DESC=""${${opt}_DESC:Q}"" -. endfor -. endfor -.endfor -.undef m -.undef otype -.undef opt -.endif # pre-config - -.if !target(do-config) -do-config: -.if empty(ALL_OPTIONS) && empty(OPTIONS_SINGLE) && empty(OPTIONS_MULTI) && empty(OPTIONS_RADIO) && empty(OPTIONS_GROUP) - @${ECHO_MSG} "===> No options to configure" -.else -.if ${UID} != 0 && !defined(INSTALL_AS_USER) - @optionsdir=${OPTIONS_FILE}; optionsdir=$${optionsdir%/*}; \ - oldoptionsdir=${OPTIONSFILE}; oldoptionsdir=$${oldoptionsdir%/*}; \ - ${ECHO_MSG} "===> Switching to root credentials to create $${optionsdir}"; \ - (${SU_CMD} "${SH} -c \"if [ -d $${oldoptionsdir} -a ! -d $${optionsdir} ]; then ${MV} $${oldoptionsdir} $${optionsdir}; elif [ -d $${oldoptionsdir} -a -d $${optionsdir} ]; then ${RM} -rf $${oldoptionsdir} ; fi ; ${MKDIR} $${optionsdir} 2> /dev/null\"") || \ - (${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1); \ - ${ECHO_MSG} "===> Returning to user credentials" -.else - @optionsdir=${OPTIONS_FILE}; optionsdir=$${optionsdir%/*}; \ - oldoptionsdir=${OPTIONSFILE}; oldoptionsdir=$${oldoptionsdir%/*}; \ - if [ -d $${oldoptionsdir} -a ! -d $${optionsdir} ]; then \ - ${MV} $${oldoptionsdir} $${optionsdir}; \ - elif [ -d $${oldoptionsdir} -a -d $${optionsdir} ]; then \ - ${RM} -rf $${oldoptionsdir} ; \ - fi ; \ - ${MKDIR} $${optionsdir} 2> /dev/null || \ - (${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1) -.endif - @TMPOPTIONSFILE=$$(mktemp -t portoptions); \ - trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \ - ${SETENV} ${D4P_ENV} ${SH} ${SCRIPTSDIR}/dialog4ports.sh $${TMPOPTIONSFILE} || { \ - ${RM} -f $${TMPOPTIONSFILE}; \ - ${ECHO_MSG} "===> Options unchanged"; \ - exit 0; \ - }; \ - ${ECHO_CMD}; \ - if [ ! -e $${TMPOPTIONSFILE} ]; then \ - ${ECHO_MSG} "===> No user-specified options to save for ${PKGNAME}"; \ - exit 0; \ - fi; \ - SELOPTIONS=$$(${CAT} $${TMPOPTIONSFILE}); \ - ${RM} -f $${TMPOPTIONSFILE}; \ - TMPOPTIONSFILE=$$(mktemp -t portoptions); \ - trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \ - ${ECHO_CMD} "# This file is auto-generated by 'make config'." > $${TMPOPTIONSFILE}; \ - ${ECHO_CMD} "# Options for ${PKGNAME}" >> $${TMPOPTIONSFILE}; \ - ${ECHO_CMD} "_OPTIONS_READ=${PKGNAME}" >> $${TMPOPTIONSFILE}; \ - ${ECHO_CMD} "_FILE_COMPLETE_OPTIONS_LIST=${COMPLETE_OPTIONS_LIST}" >> $${TMPOPTIONSFILE}; \ - for i in ${COMPLETE_OPTIONS_LIST}; do \ - if ${ECHO_CMD} $${SELOPTIONS} | ${GREP} -qw $${i}; then \ - ${ECHO_CMD} "OPTIONS_FILE_SET+=$${i}" >> $${TMPOPTIONSFILE}; \ - else \ - ${ECHO_CMD} "OPTIONS_FILE_UNSET+=$${i}" >> $${TMPOPTIONSFILE}; \ - fi; \ - done; \ - if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \ - ${ECHO_MSG} "===> Switching to root credentials to write ${OPTIONS_FILE}"; \ - ${SU_CMD} "${CAT} $${TMPOPTIONSFILE} > ${OPTIONS_FILE}"; \ - ${ECHO_MSG} "===> Returning to user credentials"; \ - else \ - ${CAT} $${TMPOPTIONSFILE} > ${OPTIONS_FILE}; \ - fi; \ - ${RM} -f $${TMPOPTIONSFILE} - @cd ${.CURDIR} && ${MAKE} sanity-config -.endif -.endif # do-config - -.if !target(config) -.if !defined(NO_DIALOG) -config: pre-config do-config -.else -config: - @${ECHO_MSG} "===> Skipping 'config' as NO_DIALOG is defined" -.endif -.endif # config - -.if !target(config-recursive) -config-recursive: - @${ECHO_MSG} "===> Setting user-specified options for ${PKGNAME} and dependencies"; - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} config-conditional); \ - done -.endif # config-recursive - -.if !target(config-conditional) -config-conditional: -.if !empty(NEW_OPTIONS) - @cd ${.CURDIR} && ${MAKE} config; -.endif -.endif # config-conditional - -.if !target(showconfig) -.include "${PORTSDIR}/Mk/bsd.options.desc.mk" -MULTI_EOL= : you have to choose at least one of them -SINGLE_EOL= : you have to select exactly one of them -RADIO_EOL= : you can only select none or one of them -showconfig: -.if !empty(COMPLETE_OPTIONS_LIST) - @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME}": -.for opt in ${ALL_OPTIONS} - @[ -z "${PORT_OPTIONS:M${opt}}" ] || match="on" ; ${ECHO_MSG} -n " ${opt}=$${match:-off}" -. if !empty(${opt}_DESC) - @${ECHO_MSG} -n ": "${${opt}_DESC:Q} -. endif - @${ECHO_MSG} "" -.endfor - -#multi and conditional multis -.for otype in MULTI GROUP SINGLE RADIO -. for m in ${OPTIONS_${otype}} -. if empty(${m}_DESC) - @${ECHO_MSG} "====> Options available for the ${otype:L} ${m}${${otype}_EOL}" -. else - @${ECHO_MSG} "====> ${${m}_DESC}${${otype}_EOL}" -. endif -. for opt in ${OPTIONS_${otype}_${m}} - @[ -z "${PORT_OPTIONS:M${opt}}" ] || match="on" ; ${ECHO_MSG} -n " ${opt}=$${match:-off}" -. if !empty(${opt}_DESC) - @${ECHO_MSG} -n ": "${${opt}_DESC:Q} -. endif - @${ECHO_MSG} "" -. endfor -. endfor -.endfor - -.undef otype -.undef m -.undef opt - @${ECHO_MSG} "===> Use 'make config' to modify these settings" -.endif -.endif # showconfig - -.if !target(showconfig-recursive) -showconfig-recursive: - @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME} and dependencies"; - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} showconfig); \ - done -.endif # showconfig-recursive - -.if !target(rmconfig) -rmconfig: -.if exists(${OPTIONSFILE}) - -@${ECHO_MSG} "===> Removing user-configured options for ${PKGNAME}"; \ - optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \ - if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \ - ${ECHO_MSG} "===> Switching to root credentials to remove ${OPTIONSFILE} and $${optionsdir}"; \ - ${SU_CMD} "${RM} -f ${OPTIONSFILE} ; \ - ${RMDIR} $${optionsdir}"; \ - ${ECHO_MSG} "===> Returning to user credentials"; \ - else \ - ${RM} -f ${OPTIONSFILE}; \ - ${RMDIR} $${optionsdir} 2>/dev/null || return 0; \ - fi -.endif -.if exists(${OPTIONS_FILE}) - -@${ECHO_MSG} "===> Removing user-configured options for ${PKGNAME}"; \ - optionsdir=${OPTIONS_FILE}; optionsdir=$${optionsdir%/*}; \ - if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \ - ${ECHO_MSG} "===> Switching to root credentials to remove ${OPTIONS_FILE} and $${optionsdir}"; \ - ${SU_CMD} "${RM} -f ${OPTIONS_FILE} ; \ - ${RMDIR} $${optionsdir}"; \ - ${ECHO_MSG} "===> Returning to user credentials"; \ - else \ - ${RM} -f ${OPTIONS_FILE}; \ - ${RMDIR} $${optionsdir} 2>/dev/null || return 0; \ - fi -.else - @${ECHO_MSG} "===> No user-specified options configured for ${PKGNAME}" -.endif -.endif # rmconfig - -.if !target(rmconfig-recursive) -rmconfig-recursive: - @${ECHO_MSG} "===> Removing user-specified options for ${PKGNAME} and dependencies"; - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} rmconfig); \ - done -.endif # rmconfig-recursive - -.if !target(pretty-print-config) -MULTI_START= [ -MULTI_END= ] -GROUP_START= [ -GROUP_END= ] -SINGLE_START= ( -SINGLE_END= ) -RADIO_START= ( -RADIO_END= ) -pretty-print-config: -.for opt in ${ALL_OPTIONS} - @[ -z "${PORT_OPTIONS:M${opt}}" ] || match="+" ; ${ECHO_MSG} -n "$${match:--}${opt} " -.endfor -.for otype in MULTI GROUP SINGLE RADIO -. for m in ${OPTIONS_${otype}} - @${ECHO_MSG} -n "${m}${${otype}_START} " -. for opt in ${OPTIONS_${otype}_${m}} - @[ -z "${PORT_OPTIONS:M${opt}}" ] || match="+" ; ${ECHO_MSG} -n "$${match:--}${opt} " -. endfor - @${ECHO_MSG} -n "${${otype}_END} " -. endfor -.endfor -.undef otype -.undef m -.undef opt - @${ECHO_MSG} "" -.endif # pretty-print-config - -desktop-categories: - @categories=""; \ - for native_category in ${CATEGORIES}; do \ - c=""; \ - case $$native_category in \ - accessibility) c="Utility Accessibility" ;; \ - archivers) c="Utility Archiving" ;; \ - astro) c="Education Science Astronomy" ;; \ - audio) c="AudioVideo Audio" ;; \ - benchmarks) c="System" ;; \ - biology) c="Education Science Biology" ;; \ - cad) c="Graphics Engineering" ;; \ - comms) c="Utility" ;; \ - converters) c="Utility" ;; \ - databases) c="Office Database" ;; \ - deskutils) c="Utility" ;; \ - devel) c="Development" ;; \ - dns) c="Network" ;; \ - elisp) c="Development" ;; \ - editors) c="Utility" ;; \ - emulators) c="System Emulator" ;; \ - finance) c="Office Finance" ;; \ - ftp) c="Network FileTransfer" ;; \ - games) c="Game" ;; \ - geography) c="Education Science Geography" ;; \ - gnome) c="GNOME GTK" ;; \ - graphics) c="Graphics" ;; \ - hamradio) c="HamRadio" ;; \ - haskell) c="Development" ;; \ - irc) c="Network IRCClient" ;; \ - java) c="Development Java" ;; \ - kde) c="KDE Qt" ;; \ - lang) c="Development" ;; \ - lisp) c="Development" ;; \ - mail) c="Office Email" ;; \ - mate) c="MATE GTK" ;; \ - math) c="Education Science Math" ;; \ - mbone) c="Network AudioVideo" ;; \ - multimedia) c="AudioVideo" ;; \ - net) c="Network" ;; \ - net-im) c="Network InstantMessaging" ;; \ - net-mgmt) c="Network" ;; \ - net-p2p) c="Network P2P" ;; \ - news) c="Network News" ;; \ - palm) c="Office PDA" ;; \ - parallel) c="ParallelComputing" ;; \ - pear) c="Development WebDevelopment" ;; \ - perl5) c="Development" ;; \ - python) c="Development" ;; \ - ruby) c="Development" ;; \ - rubygems) c="Development" ;; \ - scheme) c="Development" ;; \ - science) c="Science Education" ;; \ - security) c="System Security" ;; \ - shells) c="System Shell" ;; \ - sysutils) c="System" ;; \ - tcl*|tk*) c="Development" ;; \ - textproc) c="Utility TextTools" ;; \ - www) c="Network" ;; \ - x11-clocks) c="Utility Clock" ;; \ - x11-fm) c="System FileManager" ;; \ - xfce) c="GTK XFCE" ;; \ - zope) c="Development WebDevelopment" ;; \ - esac; \ - if [ -n "$$c" ]; then \ - categories="$$categories $$c"; \ - fi; \ - done; \ - if [ -n "$$categories" ]; then \ - for c in $$categories; do ${ECHO_MSG} "$$c"; done \ - | ${SORT} -u | ${TR} '\n' ';'; \ - ${ECHO_MSG}; \ - fi - -# http://standards.freedesktop.org/menu-spec/menu-spec-latest.html -DESKTOP_CATEGORIES_MAIN= AudioVideo Audio Video Development Education \ - Game Graphics Network Office Science Settings System Utility -DESKTOP_CATEGORIES_ADDITIONAL= Building Debugger IDE GUIDesigner Profiling \ - RevisionControl Translation Calendar ContactManagement Database \ - Dictionary Chart Email Finance FlowChart PDA ProjectManagement \ - Presentation Spreadsheet WordProcessor 2DGraphics VectorGraphics \ - RasterGraphics 3DGraphics Scanning OCR Photography Publishing Viewer \ - TextTools DesktopSettings HardwareSettings Printing PackageManager \ - Dialup InstantMessaging Chat IRCClient Feed FileTransfer HamRadio News \ - P2P RemoteAccess Telephony TelephonyTools VideoConference WebBrowser \ - WebDevelopment Midi Mixer Sequencer Tuner TV AudioVideoEditing Player \ - Recorder DiscBurning ActionGame AdventureGame ArcadeGame BoardGame \ - BlocksGame CardGame KidsGame LogicGame RolePlaying Shooter Simulation \ - SportsGame StrategyGame Art Construction Music Languages \ - ArtificialIntelligence Astronomy Biology Chemistry ComputerScience \ - DataVisualization Economy Electricity Geography Geology Geoscience \ - History Humanities ImageProcessing Literature Maps Math \ - NumericalAnalysis MedicalSoftware Physics Robotics Spirituality Sports \ - ParallelComputing Amusement Archiving Compression Electronics Emulator \ - Engineering FileTools FileManager TerminalEmulator Filesystem Monitor \ - Security Accessibility Calculator Clock TextEditor Documentation Adult \ - Core KDE GNOME MATE XFCE GTK Qt Motif Java ConsoleOnly -DESKTOP_CATEGORIES_RESERVED= Screensaver TrayIcon Applet Shell - -VALID_DESKTOP_CATEGORIES+= ${DESKTOP_CATEGORIES_MAIN} \ - ${DESKTOP_CATEGORIES_ADDITIONAL} \ - ${DESKTOP_CATEGORIES_RESERVED} - -check-desktop-entries: -.if defined(DESKTOP_ENTRIES) - @set -- ${DESKTOP_ENTRIES} XXX; \ - if [ `${EXPR} \( $$# - 1 \) % 6` -ne 0 ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: the DESKTOP_ENTRIES list must contain one or more groups of 6 elements"; \ - exit 1; \ - fi; \ - num=1; \ - while [ $$# -gt 6 ]; do \ - entry="#$$num"; \ - if [ -n "$$4" ]; then \ - entry="$$entry ($$4)"; \ - elif [ -n "$$1" ]; then \ - entry="$$entry ($$1)"; \ - fi; \ - if [ -z "$$1" ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 1 (Name) is empty"; \ - exit 1; \ - fi; \ - if ${ECHO_CMD} "$$3" | ${GREP} -iq '.\(png\|svg\|xpm\)$$'; then \ - if ! ${ECHO_CMD} "$$3" | ${GREP} -iq '^/'; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile warning: in desktop entry $$entry: field 3 (Icon) should be either absolute path or icon name without extension if installed icons follow Icon Theme Specification"; \ - fi; \ - fi; \ - if [ -z "$$4" ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 4 (Exec) is empty"; \ - exit 1; \ - fi; \ - if [ -n "$$5" ]; then \ - for c in `${ECHO_CMD} "$$5" | ${TR} ';' ' '`; do \ - if ! ${ECHO_CMD} ${VALID_DESKTOP_CATEGORIES} | ${GREP} -wq $$c; then \ - ${ECHO_CMD} "${PKGNAME}: Makefile warning: in desktop entry $$entry: category $$c is not a valid desktop category"; \ - fi; \ - done; \ - if ! ${ECHO_CMD} "$$5" | ${GREP} -q "`${ECHO_CMD} ${DESKTOP_CATEGORIES_MAIN} | ${SED} -E 's,[[:blank:]]+,\\\|,g'`"; then \ - ${ECHO_CMD} "${PKGNAME}: Makefile warning: in desktop entry $$entry: field 5 (Categories) must contain at least one main desktop category (make -VDESKTOP_CATEGORIES_MAIN)"; \ - fi; \ - if ! ${ECHO_CMD} "$$5" | ${GREP} -q ';$$'; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) does not end with a semicolon"; \ - exit 1; \ - fi; \ - else \ - if [ -z "`cd ${.CURDIR} && ${MAKE} desktop-categories`" ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) is empty and could not be deduced from the CATEGORIES variable"; \ - exit 1; \ - fi; \ - fi; \ - if [ "x$$6" != "xtrue" ] && [ "x$$6" != "xfalse" ] && [ "x$$6" != "x" ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is not \"true\", \"false\" or \"\"(empty)"; \ - exit 1; \ - fi; \ - shift 6; \ - num=`${EXPR} $$num + 1`; \ - done -.else - @${DO_NADA} -.endif - -.if !target(install-desktop-entries) -install-desktop-entries: -.if defined(DESKTOP_ENTRIES) - @set -- ${DESKTOP_ENTRIES} XXX; \ - if [ -z "${_DESKTOPDIR_REL}" ]; then \ - ${ECHO_CMD} "@cwd ${DESKTOPDIR}" >> ${TMPPLIST}; \ - fi; \ - while [ $$# -gt 6 ]; do \ - filename="`${ECHO_CMD} "$$4" | ${SED} -e 's,^/,,g;s,[/ ],_,g;s,[^_[:alnum:]],,g'`.desktop"; \ - pathname="${STAGEDIR}${DESKTOPDIR}/$$filename"; \ - categories="$$5"; \ - if [ -z "$$categories" ]; then \ - categories="`cd ${.CURDIR} && ${MAKE} desktop-categories`"; \ - fi; \ - ${ECHO_CMD} "${_DESKTOPDIR_REL}$$filename" >> ${TMPPLIST}; \ - ${ECHO_CMD} "[Desktop Entry]" > $$pathname; \ - ${ECHO_CMD} "Type=Application" >> $$pathname; \ - ${ECHO_CMD} "Version=1.0" >> $$pathname; \ - ${ECHO_CMD} "Name=$$1" >> $$pathname; \ - comment="$$2"; \ - if [ -z "$$2" ]; then \ - comment="`cd ${.CURDIR} && ${MAKE} -VCOMMENT`"; \ - fi; \ - ${ECHO_CMD} "GenericName=$$comment" >> $$pathname; \ - ${ECHO_CMD} "Comment=$$comment" >> $$pathname; \ - if [ -n "$$3" ]; then \ - ${ECHO_CMD} "Icon=$$3" >> $$pathname; \ - fi; \ - ${ECHO_CMD} "Exec=$$4" >> $$pathname; \ - ${ECHO_CMD} "Categories=$$categories" >> $$pathname; \ - if [ -n "$$6" ]; then \ - ${ECHO_CMD} "StartupNotify=$$6" >> $$pathname; \ - fi; \ - shift 6; \ - done; \ - if [ -z "${_DESKTOPDIR_REL}" ]; then \ - ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ - fi -.else - @${DO_NADA} -.endif -.endif - -.if !target(check-license) -check-license: - @${DO_NADA} -.endif - -.if !target(ask-license) -ask-license: - @${DO_NADA} -.endif - -.if !target(install-license) -install-license: - @${DO_NADA} -.endif - -.if defined(WARNING) -WARNING_WAIT?= 10 -show-warnings: - @${ECHO_MSG} "/!\\ WARNING /!\\" -.for m in ${WARNING} - @${ECHO_MSG} "${m}" -.endfor - @${ECHO_MSG} - @sleep ${WARNING_WAIT} - -check-makefile:: show-warnings -.endif - -.if defined(DEVELOPER) -.if defined(DEV_WARNING) -DEV_WARNING_WAIT?= 10 -show-dev-warnings: - @${ECHO_MSG} "/!\\ ${PKGNAME}: Makefile warnings, please consider fixing /!\\" - @${ECHO_MSG} -.for m in ${DEV_WARNING} - @${ECHO_MSG} "${m}" -.endfor - @${ECHO_MSG} - @sleep ${DEV_WARNING_WAIT} -check-makefile:: show-dev-warnings -.endif - -.if defined(DEV_ERROR) -show-dev-errors: - @${ECHO_MSG} "/!\\ ${PKGNAME}: Makefile errors /!\\" - @${ECHO_MSG} -.for m in ${DEV_ERROR} - @${ECHO_MSG} "${m}" -.endfor - @${ECHO_MSG} - @${FALSE} -check-makefile:: show-dev-errors -.endif -.endif #DEVELOPER -.endif -# End of post-makefile section. - -.endif -# End of the DESTDIR if statement diff --git a/devel/libpciaccess/Makefile b/devel/libpciaccess/Makefile index 70befad..76019e1 100644 --- a/devel/libpciaccess/Makefile +++ b/devel/libpciaccess/Makefile @@ -14,5 +14,4 @@ CONFIGURE_ARGS+= --with-pciids-path=${LOCALBASE}/share/pciids XORG_CAT= lib -NO_STAGE= yes .include <bsd.port.mk> diff --git a/graphics/libGL/bsd.mesalib.mk b/graphics/libGL/bsd.mesalib.mk index 7cb7694..8c41760 100644 --- a/graphics/libGL/bsd.mesalib.mk +++ b/graphics/libGL/bsd.mesalib.mk @@ -35,7 +35,7 @@ BUILD_DEPENDS+= makedepend:${PORTSDIR}/devel/makedepend \ python2:${PORTSDIR}/lang/python2 \ ${PYTHON_SITELIBDIR}/libxml2.py:${PORTSDIR}/textproc/py-libxml2 -USES= bison gmake pathfix pkgconfig shebangfix +USES+= bison gmake pathfix pkgconfig shebangfix USE_PYTHON_BUILD=-2.7 USE_BZIP2= yes USE_LDCONFIG= yes diff --git a/x11-drivers/xf86-input-keyboard/Makefile b/x11-drivers/xf86-input-keyboard/Makefile index 3518e17..841bd4c 100644 --- a/x11-drivers/xf86-input-keyboard/Makefile +++ b/x11-drivers/xf86-input-keyboard/Makefile @@ -2,7 +2,6 @@ PORTNAME= xf86-input-keyboard PORTVERSION= 1.8.0 -PORTREVISION= 1 CATEGORIES= x11-drivers MAINTAINER= x11@FreeBSD.org diff --git a/x11-drivers/xf86-input-mouse/Makefile b/x11-drivers/xf86-input-mouse/Makefile index 3bbe02f..c5fe162 100644 --- a/x11-drivers/xf86-input-mouse/Makefile +++ b/x11-drivers/xf86-input-mouse/Makefile @@ -2,6 +2,7 @@ PORTNAME= xf86-input-mouse PORTVERSION= 1.9.0 +PORTREVISION= 1 CATEGORIES= x11-drivers MAINTAINER= x11@FreeBSD.org @@ -9,7 +10,5 @@ COMMENT= X.Org mouse input driver XORG_CAT= driver USES= pathfix -MAN4= mousedrv.4x -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-drivers/xf86-input-mouse/pkg-plist b/x11-drivers/xf86-input-mouse/pkg-plist index 3e9b203..b871c54 100644 --- a/x11-drivers/xf86-input-mouse/pkg-plist +++ b/x11-drivers/xf86-input-mouse/pkg-plist @@ -2,6 +2,7 @@ include/xorg/xf86-mouse-properties.h lib/xorg/modules/input/mouse_drv.la lib/xorg/modules/input/mouse_drv.so libdata/pkgconfig/xorg-mouse.pc +man/man4/mousedrv.4x.gz @dirrmtry lib/xorg/modules/input @dirrmtry lib/xorg/modules @dirrmtry lib/xorg diff --git a/x11-drivers/xf86-video-ati/Makefile b/x11-drivers/xf86-video-ati/Makefile index 17ed8f4..077caa1 100644 --- a/x11-drivers/xf86-video-ati/Makefile +++ b/x11-drivers/xf86-video-ati/Makefile @@ -2,6 +2,7 @@ PORTNAME= xf86-video-ati PORTVERSION= ${ATI_VERSION} +PORTREVISION= ${ATI_REVISION} CATEGORIES= x11-drivers MAINTAINER= x11@FreeBSD.org @@ -10,17 +11,17 @@ COMMENT= X.Org ati display driver USE_GL= gl XORG_CAT= driver USE_XORG= xf86driproto xineramaproto xf86miscproto glproto -MAN4= ati.4x radeon.4x -NO_STAGE= yes .include <bsd.port.pre.mk> .if ${OSVERSION} < 1000051 || !defined(WITH_NEW_XORG) ATI_VERSION= 6.14.6 +ATI_REVISION= 1 CONFIGURE_ARGS+=--disable-kms PLIST_SUB+= OLD="" .else ATI_VERSION= 7.2.0 +ATI_REVISION= 1 CONFIGURE_ARGS+=--disable-udev EXTRA_PATCHES+= ${FILESDIR}/extra-src__radeon_kms.c PLIST_SUB+= OLD="@comment " diff --git a/x11-drivers/xf86-video-ati/pkg-plist b/x11-drivers/xf86-video-ati/pkg-plist index 1c0799f..a244776 100644 --- a/x11-drivers/xf86-video-ati/pkg-plist +++ b/x11-drivers/xf86-video-ati/pkg-plist @@ -8,6 +8,8 @@ lib/xorg/modules/drivers/radeon_drv.so %%OLD%%lib/xorg/modules/multimedia/theatre_detect_drv.so %%OLD%%lib/xorg/modules/multimedia/theatre_drv.la %%OLD%%lib/xorg/modules/multimedia/theatre_drv.so +man/man4/ati.4x.gz +man/man4/radeon.4x.gz @dirrmtry lib/xorg/modules/drivers %%OLD%%@dirrmtry lib/xorg/modules/multimedia @dirrmtry lib/xorg/modules diff --git a/x11-drivers/xf86-video-fbdev/Makefile b/x11-drivers/xf86-video-fbdev/Makefile index 3cc799f..dea21f9 100644 --- a/x11-drivers/xf86-video-fbdev/Makefile +++ b/x11-drivers/xf86-video-fbdev/Makefile @@ -2,14 +2,12 @@ PORTNAME= xf86-video-fbdev PORTVERSION= 0.4.4 -PORTREVISION= 1 +PORTREVISION= 2 CATEGORIES= x11-drivers MAINTAINER= x11@FreeBSD.org COMMENT= X.Org fbdev display driver XORG_CAT= driver -MAN4= fbdev.4x -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-drivers/xf86-video-fbdev/pkg-plist b/x11-drivers/xf86-video-fbdev/pkg-plist index 274315c..e99ec71 100644 --- a/x11-drivers/xf86-video-fbdev/pkg-plist +++ b/x11-drivers/xf86-video-fbdev/pkg-plist @@ -1,5 +1,6 @@ lib/xorg/modules/drivers/fbdev_drv.la lib/xorg/modules/drivers/fbdev_drv.so +man/man4/fbdev.4x.gz @dirrmtry lib/xorg/modules/drivers @dirrmtry lib/xorg/modules @dirrmtry lib/xorg diff --git a/x11-drivers/xf86-video-intel/Makefile b/x11-drivers/xf86-video-intel/Makefile index a06f593..708df7f 100644 --- a/x11-drivers/xf86-video-intel/Makefile +++ b/x11-drivers/xf86-video-intel/Makefile @@ -27,7 +27,7 @@ USE_XORG= glproto \ .if defined(WITH_NEW_XORG) INTEL_VERSION= 2.21.15 -INTEL_REVISION= 0 +INTEL_REVISION= 1 CONFIGURE_ENV+= xorg_cv_cc_flag__Wno_maybe_uninitialized=no CONFIGURE_ARGS+= --enable-sna MAKE_JOBS_UNSAFE=yes @@ -39,7 +39,7 @@ EXTRA_PATCHES+= ${PATCHDIR}/extra-src__sna__sna_threads.c \ LIB_DEPENDS+= libxcb-util.so:${PORTSDIR}/x11/xcb-util .else INTEL_VERSION= 2.7.1 -INTEL_REVISION= 5 +INTEL_REVISION= 6 PLIST_SUB+= OLD="" EXTRA_PATCHES+= ${PATCHDIR}/extra-src_ch7017_ch7017.c \ diff --git a/x11-drivers/xf86-video-vesa/Makefile b/x11-drivers/xf86-video-vesa/Makefile index 3b80a5c..6b2ed13 100644 --- a/x11-drivers/xf86-video-vesa/Makefile +++ b/x11-drivers/xf86-video-vesa/Makefile @@ -2,13 +2,12 @@ PORTNAME= xf86-video-vesa PORTVERSION= 2.3.3 +PORTREVISION= 1 CATEGORIES= x11-drivers MAINTAINER= x11@FreeBSD.org COMMENT= X.Org vesa display driver XORG_CAT= driver -MAN4= vesa.4x -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-drivers/xf86-video-vesa/pkg-plist b/x11-drivers/xf86-video-vesa/pkg-plist index 5a9cf2e..1091e20 100644 --- a/x11-drivers/xf86-video-vesa/pkg-plist +++ b/x11-drivers/xf86-video-vesa/pkg-plist @@ -1,5 +1,6 @@ lib/xorg/modules/drivers/vesa_drv.la lib/xorg/modules/drivers/vesa_drv.so +man/man4/vesa.4x.gz @dirrmtry lib/xorg/modules/drivers @dirrmtry lib/xorg/modules @dirrmtry lib/xorg diff --git a/x11-drivers/xorg-drivers/Makefile b/x11-drivers/xorg-drivers/Makefile index a8f0921..2729f9a 100644 --- a/x11-drivers/xorg-drivers/Makefile +++ b/x11-drivers/xorg-drivers/Makefile @@ -97,7 +97,6 @@ SUNFFB_DESC= Install sunffb video driver # these drivers have a different module name compared to the plugin they install QUIRKS= keyboard:kbd -NO_STAGE= yes .include <bsd.port.options.mk> # Manual add arch specific drivers so they be added to depend lines. @@ -122,7 +121,7 @@ RUN_DEPENDS+= ${${type:U}DIR}/${i}_drv.so:${PORTSDIR}/x11-drivers/xf86-${type}-$ .endfor do-install: - ${MKDIR} ${PREFIX}/libdata/xorg - ${TOUCH} ${PREFIX}/libdata/xorg/drivers + ${MKDIR} ${STAGEDIR}${PREFIX}/libdata/xorg + ${TOUCH} ${STAGEDIR}${PREFIX}/libdata/xorg/drivers .include <bsd.port.mk> diff --git a/x11-fonts/libXfont/Makefile b/x11-fonts/libXfont/Makefile index 1741768..dba8dc6 100644 --- a/x11-fonts/libXfont/Makefile +++ b/x11-fonts/libXfont/Makefile @@ -16,5 +16,4 @@ USE_XORG= xproto:both xtrans fontsproto:both fontenc CONFIGURE_ARGS=--without-xmlto --disable-devel-docs -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-fonts/xfs/Makefile b/x11-fonts/xfs/Makefile index be18e10..0fa5429 100644 --- a/x11-fonts/xfs/Makefile +++ b/x11-fonts/xfs/Makefile @@ -14,9 +14,6 @@ USE_XORG= libfs xfont xtrans USE_RC_SUBR= xfs CONFIGURE_ARGS= --without-xmlto --without-fop -MAN1= xfs.1 - -NO_STAGE= yes post-patch: ${REINPLACE_CMD} '/^config_DATA/d' ${WRKSRC}/config/Makefile.in .if defined(WITHOUT_XFS_CACHE) @@ -27,9 +24,7 @@ post-build: @cd ${WRKSRC}/config/ && ${GMAKE} config post-install: - ${INSTALL_SCRIPT} ${WRKSRC}/config/config ${PREFIX}/etc/X11/fs/config.default - @if [ ! -f ${PREFIX}/etc/X11/fs/config ]; then \ - ${INSTALL_SCRIPT} ${WRKSRC}/config/config ${PREFIX}/etc/X11/fs/config; \ - fi + ${INSTALL_SCRIPT} ${WRKSRC}/config/config ${STAGEDIR}${PREFIX}/etc/X11/fs/config.default + ${INSTALL_SCRIPT} ${WRKSRC}/config/config ${STAGEDIR}${PREFIX}/etc/X11/fs/config; \ .include <bsd.port.mk> diff --git a/x11-fonts/xfs/pkg-plist b/x11-fonts/xfs/pkg-plist index e2378ab..e175b97 100644 --- a/x11-fonts/xfs/pkg-plist +++ b/x11-fonts/xfs/pkg-plist @@ -1,4 +1,5 @@ bin/xfs +man/man1/xfs.1.gz @unexec if cmp -s %D/etc/X11/fs/config.default %D/etc/X11/fs/config; then rm -f %D/etc/X11/fs/config; fi etc/X11/fs/config.default @exec if [ ! -f %D/etc/X11/fs/config ] ; then cp -p %D/%F %B/config; fi diff --git a/x11-fonts/xorg-fonts-100dpi/Makefile b/x11-fonts/xorg-fonts-100dpi/Makefile index c3a6520..7517c77 100644 --- a/x11-fonts/xorg-fonts-100dpi/Makefile +++ b/x11-fonts/xorg-fonts-100dpi/Makefile @@ -21,9 +21,9 @@ RUN_DEPENDS= ${FONTDIR}/100dpi/courB08.pcf.gz:${PORTSDIR}/x11-fonts/font-adobe-1 CONFLICTS= XFree86-font100dpi-* NO_BUILD= # none +NO_MTREE= yes FONTDIR= ${LOCALBASE}/lib/X11/fonts do-install: # empty -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-fonts/xorg-fonts-75dpi/Makefile b/x11-fonts/xorg-fonts-75dpi/Makefile index 496f98f..f863267 100644 --- a/x11-fonts/xorg-fonts-75dpi/Makefile +++ b/x11-fonts/xorg-fonts-75dpi/Makefile @@ -21,9 +21,9 @@ RUN_DEPENDS= ${FONTDIR}/75dpi/courB08.pcf.gz:${PORTSDIR}/x11-fonts/font-adobe-75 CONFLICTS= XFree86-font75dpi-* NO_BUILD= # none +NO_MTREE= yes FONTDIR= ${LOCALBASE}/lib/X11/fonts do-install: # empty -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-fonts/xorg-fonts-cyrillic/Makefile b/x11-fonts/xorg-fonts-cyrillic/Makefile index b78adb9..d2242bc 100644 --- a/x11-fonts/xorg-fonts-cyrillic/Makefile +++ b/x11-fonts/xorg-fonts-cyrillic/Makefile @@ -20,9 +20,9 @@ RUN_DEPENDS= ${FONTDIR}/cyrillic/crox1c.pcf.gz:${PORTSDIR}/x11-fonts/font-cronyx CONFLICTS= XFree86-fontCyrillic-* NO_BUILD= # none +NO_MTREE= yes FONTDIR= ${LOCALBASE}/lib/X11/fonts do-install: # empty -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-fonts/xorg-fonts-miscbitmaps/Makefile b/x11-fonts/xorg-fonts-miscbitmaps/Makefile index dffea8b..193725e 100644 --- a/x11-fonts/xorg-fonts-miscbitmaps/Makefile +++ b/x11-fonts/xorg-fonts-miscbitmaps/Makefile @@ -27,9 +27,9 @@ RUN_DEPENDS= ${FONTDIR}/misc/arabic24.pcf.gz:${PORTSDIR}/x11-fonts/font-arabic-m CONFLICTS= XFree86-fontDefaultBitmaps-* NO_BUILD= # none +NO_MTREE= yes FONTDIR= ${LOCALBASE}/lib/X11/fonts do-install: # empty -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-fonts/xorg-fonts-truetype/Makefile b/x11-fonts/xorg-fonts-truetype/Makefile index a70282f..fc5cbb1 100644 --- a/x11-fonts/xorg-fonts-truetype/Makefile +++ b/x11-fonts/xorg-fonts-truetype/Makefile @@ -21,7 +21,7 @@ RUN_DEPENDS= ${FONTDIR}/TTF/luximb.ttf:${PORTSDIR}/x11-fonts/font-bh-ttf \ do-install: # empty NO_BUILD= # none +NO_MTREE= yes FONTDIR= ${LOCALBASE}/lib/X11/fonts -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-fonts/xorg-fonts-type1/Makefile b/x11-fonts/xorg-fonts-type1/Makefile index a6c2739..f254b37 100644 --- a/x11-fonts/xorg-fonts-type1/Makefile +++ b/x11-fonts/xorg-fonts-type1/Makefile @@ -23,7 +23,7 @@ CONFLICTS= XFree86-fontScalable-* do-install: # empty NO_BUILD= # none +NO_MTREE= yes FONTDIR= ${LOCALBASE}/lib/X11/fonts -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-fonts/xorg-fonts/Makefile b/x11-fonts/xorg-fonts/Makefile index f3ef39b..33a7041 100644 --- a/x11-fonts/xorg-fonts/Makefile +++ b/x11-fonts/xorg-fonts/Makefile @@ -23,9 +23,8 @@ RUN_DEPENDS= xorg-fonts-100dpi>=0:${PORTSDIR}/x11-fonts/xorg-fonts-100dpi \ NO_BUILD= yes -NO_STAGE= yes do-install: - ${MKDIR} ${PREFIX}/libdata/xorg - ${TOUCH} ${PREFIX}/libdata/xorg/fonts + ${MKDIR} ${STAGEDIR}${PREFIX}/libdata/xorg + ${TOUCH} ${STAGEDIR}${PREFIX}/libdata/xorg/fonts .include <bsd.port.mk> diff --git a/x11-servers/xephyr/Makefile b/x11-servers/xephyr/Makefile index bab652e..f62b4b0 100644 --- a/x11-servers/xephyr/Makefile +++ b/x11-servers/xephyr/Makefile @@ -19,10 +19,16 @@ CONFIGURE_ARGS= --enable-kdrive --enable-xephyr --disable-dmx --disable-xvfb \ --disable-xnest --localstatedir=/var --without-dtrace SLAVE_PORT= yes -PLIST_FILES= bin/Xephyr +PLIST_FILES= bin/Xephyr man/man1/Xephyr.1.gz + +.include <bsd.port.options.mk> -NO_STAGE= yes do-install: - ${INSTALL_PROGRAM} ${WRKSRC}/hw/kdrive/ephyr/Xephyr ${PREFIX}/bin/ + ${INSTALL_PROGRAM} ${WRKSRC}/hw/kdrive/ephyr/Xephyr ${STAGEDIR}${PREFIX}/bin/ +.if defined(WITH_NEW_XORG) + ${INSTALL_MAN} ${WRKSRC}/hw/kdrive/ephyr/man/Xephyr.1 ${STAGEDIR}${PREFIX}/man/man1/ +.else + ${INSTALL_MAN} ${WRKSRC}/hw/kdrive/ephyr/Xephyr.1 ${STAGEDIR}${PREFIX}/man/man1/ +.endif .include "${MASTERDIR}/Makefile" diff --git a/x11-servers/xorg-dmx/Makefile b/x11-servers/xorg-dmx/Makefile index f1ef1e4..e54c94f 100644 --- a/x11-servers/xorg-dmx/Makefile +++ b/x11-servers/xorg-dmx/Makefile @@ -23,6 +23,6 @@ CONFIGURE_ARGS= --disable-xvfb --disable-xnest \ SLAVE_PORT= yes do-install: - cd ${WRKSRC}/hw/dmx; ${MAKE} install + cd ${WRKSRC}/hw/dmx; DESTDIR=${STAGEDIR} ${MAKE} install .include "${MASTERDIR}/Makefile" diff --git a/x11-servers/xorg-nestserver/Makefile b/x11-servers/xorg-nestserver/Makefile index 7dc1ab3..3257a20 100644 --- a/x11-servers/xorg-nestserver/Makefile +++ b/x11-servers/xorg-nestserver/Makefile @@ -20,8 +20,9 @@ CONFIGURE_ARGS= --disable-dmx --disable-xvfb \ --localstatedir=/var --without-dtrace SLAVE_PORT= yes -PLIST_FILES= bin/Xnest \ - man/man1/Xnest.1.gz +PLIST_FILES= bin/Xnest man/man1/Xnest.1.gz + +.include <bsd.port.options.mk> do-install: ${INSTALL_PROGRAM} ${WRKSRC}/hw/xnest/Xnest ${STAGEDIR}${PREFIX}/bin/ diff --git a/x11-toolkits/libXaw/Makefile b/x11-toolkits/libXaw/Makefile index da11eaa..2dd6999 100644 --- a/x11-toolkits/libXaw/Makefile +++ b/x11-toolkits/libXaw/Makefile @@ -14,7 +14,4 @@ USE_XORG= printproto:both x11 xau xext xextproto xmu xp xpm xproto:both xt USES= gmake CONFIGURE_ARGS+=--without-xmlto -MAN3= Xaw.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-toolkits/libXaw/pkg-plist b/x11-toolkits/libXaw/pkg-plist index d8c4c79..1d6a6c3 100644 --- a/x11-toolkits/libXaw/pkg-plist +++ b/x11-toolkits/libXaw/pkg-plist @@ -82,6 +82,7 @@ lib/libXaw7.so lib/libXaw7.so.7 libdata/pkgconfig/xaw6.pc libdata/pkgconfig/xaw7.pc +man/man3/Xaw.3.gz %%DOCSDIR%%/AsciiSink.xml %%DOCSDIR%%/AsciiSource.xml %%DOCSDIR%%/AsciiText.xml diff --git a/x11-toolkits/libXmu/Makefile b/x11-toolkits/libXmu/Makefile index f5eab9c..e0c0383 100644 --- a/x11-toolkits/libXmu/Makefile +++ b/x11-toolkits/libXmu/Makefile @@ -12,5 +12,4 @@ COMMENT= X Miscellaneous Utilities libraries XORG_CAT= lib USE_XORG= xproto:both x11 xt xext -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11-toolkits/libXt/Makefile b/x11-toolkits/libXt/Makefile index 6cc4439..9b09cf6 100644 --- a/x11-toolkits/libXt/Makefile +++ b/x11-toolkits/libXt/Makefile @@ -13,276 +13,6 @@ XORG_CAT= lib USE_XORG= x11 sm xproto:both kbproto CONFIGURE_ARGS= --disable-specs -MAN3= MenuPopdown.3 \ - MenuPopup.3 \ - XtAddActions.3 \ - XtAddCallback.3 \ - XtAddCallbacks.3 \ - XtAddConverter.3 \ - XtAddEventHandler.3 \ - XtAddExposureToRegion.3 \ - XtAddGrab.3 \ - XtAddInput.3 \ - XtAddRawEventHandler.3 \ - XtAddTimeOut.3 \ - XtAddWorkProc.3 \ - XtAllocateGC.3 \ - XtAppAddActionHook.3 \ - XtAppAddActions.3 \ - XtAppAddBlockHook.3 \ - XtAppAddConverter.3 \ - XtAppAddInput.3 \ - XtAppAddSignal.3 \ - XtAppAddTimeOut.3 \ - XtAppAddWorkProc.3 \ - XtAppCreateShell.3 \ - XtAppError.3 \ - XtAppErrorMsg.3 \ - XtAppGetErrorDatabase.3 \ - XtAppGetErrorDatabaseText.3 \ - XtAppGetExitFlag.3 \ - XtAppGetSelectionTimeout.3 \ - XtAppInitialize.3 \ - XtAppLock.3 \ - XtAppMainLoop.3 \ - XtAppNextEvent.3 \ - XtAppPeekEvent.3 \ - XtAppPending.3 \ - XtAppProcessEvent.3 \ - XtAppReleaseCacheRefs.3 \ - XtAppSetErrorHandler.3 \ - XtAppSetErrorMsgHandler.3 \ - XtAppSetExitFlag.3 \ - XtAppSetFallbackResources.3 \ - XtAppSetSelectionTimeout.3 \ - XtAppSetTypeConverter.3 \ - XtAppSetWarningHandler.3 \ - XtAppSetWarningMsgHandler.3 \ - XtAppUnlock.3 \ - XtAppWarning.3 \ - XtAppWarningMsg.3 \ - XtAsprintf.3 \ - XtAugmentTranslations.3 \ - XtBuildEventMask.3 \ - XtCallAcceptFocus.3\ - XtCallActionProc.3 \ - XtCallCallbackList.3 \ - XtCallCallbacks.3 \ - XtCallConverter.3 \ - XtCallbackExclusive.3 \ - XtCallbackNone.3 \ - XtCallbackNonexclusive.3 \ - XtCallbackPopdown.3 \ - XtCalloc.3 \ - XtCancelSelectionRequest.3 \ - XtChangeManagedSet.3 \ - XtCheckSubclass.3 \ - XtClass.3\ - XtCloseDisplay.3\ - XtConfigureWidget.3\ - XtConvert.3\ - XtConvertAndStore.3\ - XtConvertCase.3\ - XtCreateApplicationContext.3\ - XtCreateApplicationShell.3\ - XtCreateManagedWidget.3\ - XtCreatePopupShell.3\ - XtCreateSelectionRequest.3\ - XtCreateWidget.3\ - XtCreateWindow.3\ - XtDatabase.3\ - XtDestroyApplicationContext.3\ - XtDestroyWidget.3\ - XtDirectConvert.3\ - XtDisownSelection.3 \ - XtDispatchEvent.3 \ - XtDispatchEventToWidget.3\ - XtDisplay.3\ - XtDisplayInitialize.3\ - XtDisplayOfObject.3\ - XtDisplayStringConversionWarning.3\ - XtDisplayToApplicationContext.3\ - XtError.3\ - XtErrorMsg.3\ - XtFindFile.3\ - XtFree.3\ - XtGetActionKeysym.3\ - XtGetActionList.3\ - XtGetApplicationNameAndClass.3\ - XtGetApplicationResources.3\ - XtGetClassExtension.3\ - XtGetConstraintResourceList.3\ - XtGetDisplays.3\ - XtGetErrorDatabase.3\ - XtGetErrorDatabaseText.3\ - XtGetGC.3\ - XtGetKeyboardFocusWidget.3\ - XtGetKeysymTable.3\ - XtGetMultiClickTime.3 \ - XtGetResourceList.3\ - XtGetSelectionParameters.3\ - XtGetSelectionRequest.3\ - XtGetSelectionTimeout.3\ - XtGetSelectionValue.3\ - XtGetSelectionValueIncremental.3 \ - XtGetSelectionValues.3\ - XtGetSelectionValuesIncremental.3 \ - XtGetSubresources.3 \ - XtGetSubvalues.3 \ - XtGetValues.3 \ - XtGrabButton.3 \ - XtGrabKey.3 \ - XtGrabKeyboard.3 \ - XtGrabPointer.3 \ - XtHasCallbacks.3 \ - XtHooksOfDisplay.3 \ - XtInitialize.3 \ - XtInitializeWidgetClass.3 \ - XtInsertEventHandler.3 \ - XtInsertEventTypeHandler.3 \ - XtInsertRawEventHandler.3 \ - XtInstallAccelerators.3\ - XtInstallAllAccelerators.3\ - XtIsApplicationShell.3\ - XtIsComposite.3\ - XtIsConstraint.3\ - XtIsManaged.3\ - XtIsObject.3\ - XtIsOverrideShell.3\ - XtIsRealized.3\ - XtIsRectObj.3\ - XtIsSensitive.3\ - XtIsSessionShell.3\ - XtIsShell.3\ - XtIsSubclass.3\ - XtIsTopLevelShell.3\ - XtIsTransientShell.3\ - XtIsVendorShell.3\ - XtIsWMShell.3\ - XtIsWidget.3\ - XtKeysymToKeycodeList.3\ - XtLastEventProcessed.3\ - XtLastTimestampProcessed.3 \ - XtMainLoop.3 \ - XtMakeGeometryRequest.3 \ - XtMakeResizeRequest.3 \ - XtMalloc.3 \ - XtManageChild.3 \ - XtManageChildren.3 \ - XtMapWidget.3 \ - XtMergeArgLists.3 \ - XtMoveWidget.3 \ - XtName.3 \ - XtNameToWidget.3 \ - XtNew.3 \ - XtNewString.3 \ - XtNextEvent.3 \ - XtNoticeSignal.3 \ - XtNumber.3 \ - XtOffset.3 \ - XtOffsetOf.3 \ - XtOpenApplication.3 \ - XtOpenDisplay.3 \ - XtOverrideTranslations.3 \ - XtOwnSelection.3 \ - XtOwnSelectionIncremental.3 \ - XtParent.3 \ - XtParseAcceleratorTable.3 \ - XtParseTranslationTable.3 \ - XtPeekEvent.3 \ - XtPending.3 \ - XtPopdown.3 \ - XtPopup.3 \ - XtPopupSpringLoaded.3 \ - XtProcessEvent.3 \ - XtProcessLock.3 \ - XtProcessUnlock.3 \ - XtQueryGeometry.3 \ - XtRealizeWidget.3 \ - XtRealloc.3 \ - XtRegisterCaseConverter.3 \ - XtRegisterDrawable.3 \ - XtRegisterExtensionSelector.3 \ - XtRegisterGrabAction.3 \ - XtReleaseGC.3 \ - XtReleasePropertyAtom.3 \ - XtRemoveActionHook.3 \ - XtRemoveAllCallbacks.3 \ - XtRemoveBlockHook.3 \ - XtRemoveCallback.3 \ - XtRemoveCallbacks.3 \ - XtRemoveEventHandler.3\ - XtRemoveEventTypeHandler.3\ - XtRemoveGrab.3\ - XtRemoveInput.3\ - XtRemoveRawEventHandler.3\ - XtRemoveSignal.3\ - XtRemoveTimeOut.3\ - XtRemoveWorkProc.3\ - XtReservePropertyAtom.3\ - XtResizeWidget.3\ - XtResolvePathname.3\ - XtScreen.3\ - XtScreenDatabase.3\ - XtScreenOfObject.3\ - XtSendSelectionRequest.3\ - XtSessionGetToken.3\ - XtSessionReturnToken.3\ - XtSetArg.3\ - XtSetErrorHandler.3\ - XtSetErrorMsgHandler.3\ - XtSetEventDispatcher.3\ - XtSetKeyTranslator.3\ - XtSetKeyboardFocus.3\ - XtSetLanguageProc.3 \ - XtSetMappedWhenManaged.3 \ - XtSetMultiClickTime.3 \ - XtSetSelectionParameters.3 \ - XtSetSelectionTimeout.3 \ - XtSetSensitive.3 \ - XtSetSubvalues.3 \ - XtSetTypeConverter.3 \ - XtSetValues.3 \ - XtSetWMColormapWindows.3 \ - XtSetWarningHandler.3 \ - XtSetWarningMsgHandler.3\ - XtStringConversionWarning.3\ - XtSuperclass.3\ - XtToolkitInitialize.3\ - XtToolkitThreadInitialize.3\ - XtTranslateCoords.3 \ - XtTranslateKeycode.3\ - XtUngrabButton.3\ - XtUngrabKey.3\ - XtUngrabKeyboard.3\ - XtUngrabPointer.3\ - XtUninstallTranslations.3\ - XtUnmanageChild.3\ - XtUnmanageChildren.3\ - XtUnmapWidget.3\ - XtUnrealizeWidget.3\ - XtUnregisterDrawable.3\ - XtVaAppCreateShell.3\ - XtVaAppInitialize.3\ - XtVaCreateArgsList.3\ - XtVaCreateManagedWidget.3\ - XtVaCreatePopupShell.3\ - XtVaCreateWidget.3\ - XtVaGetApplicationResources.3\ - XtVaGetSubresources.3\ - XtVaGetSubvalues.3 \ - XtVaGetValues.3 \ - XtVaOpenApplication.3\ - XtVaSetSubvalues.3\ - XtVaSetValues.3\ - XtWarning.3 \ - XtWarningMsg.3\ - XtWidgetToApplicationContext.3\ - XtWindow.3 \ - XtWindowOfObject.3 \ - XtWindowToWidget.3 - -NO_STAGE= yes post-patch: @${REINPLACE_CMD} 's/test.*-traditional.*;/true;/' \ ${WRKSRC}/configure diff --git a/x11-toolkits/libXt/pkg-plist b/x11-toolkits/libXt/pkg-plist index 2020099..1f049a9 100644 --- a/x11-toolkits/libXt/pkg-plist +++ b/x11-toolkits/libXt/pkg-plist @@ -36,3 +36,271 @@ lib/libXt.la lib/libXt.so lib/libXt.so.6 libdata/pkgconfig/xt.pc +man/man3/MenuPopdown.3.gz +man/man3/MenuPopup.3.gz +man/man3/XtAddActions.3.gz +man/man3/XtAddCallback.3.gz +man/man3/XtAddCallbacks.3.gz +man/man3/XtAddConverter.3.gz +man/man3/XtAddEventHandler.3.gz +man/man3/XtAddExposureToRegion.3.gz +man/man3/XtAddGrab.3.gz +man/man3/XtAddInput.3.gz +man/man3/XtAddRawEventHandler.3.gz +man/man3/XtAddTimeOut.3.gz +man/man3/XtAddWorkProc.3.gz +man/man3/XtAllocateGC.3.gz +man/man3/XtAppAddActionHook.3.gz +man/man3/XtAppAddActions.3.gz +man/man3/XtAppAddBlockHook.3.gz +man/man3/XtAppAddConverter.3.gz +man/man3/XtAppAddInput.3.gz +man/man3/XtAppAddSignal.3.gz +man/man3/XtAppAddTimeOut.3.gz +man/man3/XtAppAddWorkProc.3.gz +man/man3/XtAppCreateShell.3.gz +man/man3/XtAppError.3.gz +man/man3/XtAppErrorMsg.3.gz +man/man3/XtAppGetErrorDatabase.3.gz +man/man3/XtAppGetErrorDatabaseText.3.gz +man/man3/XtAppGetExitFlag.3.gz +man/man3/XtAppGetSelectionTimeout.3.gz +man/man3/XtAppInitialize.3.gz +man/man3/XtAppLock.3.gz +man/man3/XtAppMainLoop.3.gz +man/man3/XtAppNextEvent.3.gz +man/man3/XtAppPeekEvent.3.gz +man/man3/XtAppPending.3.gz +man/man3/XtAppProcessEvent.3.gz +man/man3/XtAppReleaseCacheRefs.3.gz +man/man3/XtAppSetErrorHandler.3.gz +man/man3/XtAppSetErrorMsgHandler.3.gz +man/man3/XtAppSetExitFlag.3.gz +man/man3/XtAppSetFallbackResources.3.gz +man/man3/XtAppSetSelectionTimeout.3.gz +man/man3/XtAppSetTypeConverter.3.gz +man/man3/XtAppSetWarningHandler.3.gz +man/man3/XtAppSetWarningMsgHandler.3.gz +man/man3/XtAppUnlock.3.gz +man/man3/XtAppWarning.3.gz +man/man3/XtAppWarningMsg.3.gz +man/man3/XtAsprintf.3.gz +man/man3/XtAugmentTranslations.3.gz +man/man3/XtBuildEventMask.3.gz +man/man3/XtCallAcceptFocus.3.gz +man/man3/XtCallActionProc.3.gz +man/man3/XtCallCallbackList.3.gz +man/man3/XtCallCallbacks.3.gz +man/man3/XtCallConverter.3.gz +man/man3/XtCallbackExclusive.3.gz +man/man3/XtCallbackNone.3.gz +man/man3/XtCallbackNonexclusive.3.gz +man/man3/XtCallbackPopdown.3.gz +man/man3/XtCalloc.3.gz +man/man3/XtCancelSelectionRequest.3.gz +man/man3/XtChangeManagedSet.3.gz +man/man3/XtCheckSubclass.3.gz +man/man3/XtClass.3.gz +man/man3/XtCloseDisplay.3.gz +man/man3/XtConfigureWidget.3.gz +man/man3/XtConvert.3.gz +man/man3/XtConvertAndStore.3.gz +man/man3/XtConvertCase.3.gz +man/man3/XtCreateApplicationContext.3.gz +man/man3/XtCreateApplicationShell.3.gz +man/man3/XtCreateManagedWidget.3.gz +man/man3/XtCreatePopupShell.3.gz +man/man3/XtCreateSelectionRequest.3.gz +man/man3/XtCreateWidget.3.gz +man/man3/XtCreateWindow.3.gz +man/man3/XtDatabase.3.gz +man/man3/XtDestroyApplicationContext.3.gz +man/man3/XtDestroyWidget.3.gz +man/man3/XtDirectConvert.3.gz +man/man3/XtDisownSelection.3.gz +man/man3/XtDispatchEvent.3.gz +man/man3/XtDispatchEventToWidget.3.gz +man/man3/XtDisplay.3.gz +man/man3/XtDisplayInitialize.3.gz +man/man3/XtDisplayOfObject.3.gz +man/man3/XtDisplayStringConversionWarning.3.gz +man/man3/XtDisplayToApplicationContext.3.gz +man/man3/XtError.3.gz +man/man3/XtErrorMsg.3.gz +man/man3/XtFindFile.3.gz +man/man3/XtFree.3.gz +man/man3/XtGetActionKeysym.3.gz +man/man3/XtGetActionList.3.gz +man/man3/XtGetApplicationNameAndClass.3.gz +man/man3/XtGetApplicationResources.3.gz +man/man3/XtGetClassExtension.3.gz +man/man3/XtGetConstraintResourceList.3.gz +man/man3/XtGetDisplays.3.gz +man/man3/XtGetErrorDatabase.3.gz +man/man3/XtGetErrorDatabaseText.3.gz +man/man3/XtGetGC.3.gz +man/man3/XtGetKeyboardFocusWidget.3.gz +man/man3/XtGetKeysymTable.3.gz +man/man3/XtGetMultiClickTime.3.gz +man/man3/XtGetResourceList.3.gz +man/man3/XtGetSelectionParameters.3.gz +man/man3/XtGetSelectionRequest.3.gz +man/man3/XtGetSelectionTimeout.3.gz +man/man3/XtGetSelectionValue.3.gz +man/man3/XtGetSelectionValueIncremental.3.gz +man/man3/XtGetSelectionValues.3.gz +man/man3/XtGetSelectionValuesIncremental.3.gz +man/man3/XtGetSubresources.3.gz +man/man3/XtGetSubvalues.3.gz +man/man3/XtGetValues.3.gz +man/man3/XtGrabButton.3.gz +man/man3/XtGrabKey.3.gz +man/man3/XtGrabKeyboard.3.gz +man/man3/XtGrabPointer.3.gz +man/man3/XtHasCallbacks.3.gz +man/man3/XtHooksOfDisplay.3.gz +man/man3/XtInitialize.3.gz +man/man3/XtInitializeWidgetClass.3.gz +man/man3/XtInsertEventHandler.3.gz +man/man3/XtInsertEventTypeHandler.3.gz +man/man3/XtInsertRawEventHandler.3.gz +man/man3/XtInstallAccelerators.3.gz +man/man3/XtInstallAllAccelerators.3.gz +man/man3/XtIsApplicationShell.3.gz +man/man3/XtIsComposite.3.gz +man/man3/XtIsConstraint.3.gz +man/man3/XtIsManaged.3.gz +man/man3/XtIsObject.3.gz +man/man3/XtIsOverrideShell.3.gz +man/man3/XtIsRealized.3.gz +man/man3/XtIsRectObj.3.gz +man/man3/XtIsSensitive.3.gz +man/man3/XtIsSessionShell.3.gz +man/man3/XtIsShell.3.gz +man/man3/XtIsSubclass.3.gz +man/man3/XtIsTopLevelShell.3.gz +man/man3/XtIsTransientShell.3.gz +man/man3/XtIsVendorShell.3.gz +man/man3/XtIsWMShell.3.gz +man/man3/XtIsWidget.3.gz +man/man3/XtKeysymToKeycodeList.3.gz +man/man3/XtLastEventProcessed.3.gz +man/man3/XtLastTimestampProcessed.3.gz +man/man3/XtMainLoop.3.gz +man/man3/XtMakeGeometryRequest.3.gz +man/man3/XtMakeResizeRequest.3.gz +man/man3/XtMalloc.3.gz +man/man3/XtManageChild.3.gz +man/man3/XtManageChildren.3.gz +man/man3/XtMapWidget.3.gz +man/man3/XtMergeArgLists.3.gz +man/man3/XtMoveWidget.3.gz +man/man3/XtName.3.gz +man/man3/XtNameToWidget.3.gz +man/man3/XtNew.3.gz +man/man3/XtNewString.3.gz +man/man3/XtNextEvent.3.gz +man/man3/XtNoticeSignal.3.gz +man/man3/XtNumber.3.gz +man/man3/XtOffset.3.gz +man/man3/XtOffsetOf.3.gz +man/man3/XtOpenApplication.3.gz +man/man3/XtOpenDisplay.3.gz +man/man3/XtOverrideTranslations.3.gz +man/man3/XtOwnSelection.3.gz +man/man3/XtOwnSelectionIncremental.3.gz +man/man3/XtParent.3.gz +man/man3/XtParseAcceleratorTable.3.gz +man/man3/XtParseTranslationTable.3.gz +man/man3/XtPeekEvent.3.gz +man/man3/XtPending.3.gz +man/man3/XtPopdown.3.gz +man/man3/XtPopup.3.gz +man/man3/XtPopupSpringLoaded.3.gz +man/man3/XtProcessEvent.3.gz +man/man3/XtProcessLock.3.gz +man/man3/XtProcessUnlock.3.gz +man/man3/XtQueryGeometry.3.gz +man/man3/XtRealizeWidget.3.gz +man/man3/XtRealloc.3.gz +man/man3/XtRegisterCaseConverter.3.gz +man/man3/XtRegisterDrawable.3.gz +man/man3/XtRegisterExtensionSelector.3.gz +man/man3/XtRegisterGrabAction.3.gz +man/man3/XtReleaseGC.3.gz +man/man3/XtReleasePropertyAtom.3.gz +man/man3/XtRemoveActionHook.3.gz +man/man3/XtRemoveAllCallbacks.3.gz +man/man3/XtRemoveBlockHook.3.gz +man/man3/XtRemoveCallback.3.gz +man/man3/XtRemoveCallbacks.3.gz +man/man3/XtRemoveEventHandler.3.gz +man/man3/XtRemoveEventTypeHandler.3.gz +man/man3/XtRemoveGrab.3.gz +man/man3/XtRemoveInput.3.gz +man/man3/XtRemoveRawEventHandler.3.gz +man/man3/XtRemoveSignal.3.gz +man/man3/XtRemoveTimeOut.3.gz +man/man3/XtRemoveWorkProc.3.gz +man/man3/XtReservePropertyAtom.3.gz +man/man3/XtResizeWidget.3.gz +man/man3/XtResolvePathname.3.gz +man/man3/XtScreen.3.gz +man/man3/XtScreenDatabase.3.gz +man/man3/XtScreenOfObject.3.gz +man/man3/XtSendSelectionRequest.3.gz +man/man3/XtSessionGetToken.3.gz +man/man3/XtSessionReturnToken.3.gz +man/man3/XtSetArg.3.gz +man/man3/XtSetErrorHandler.3.gz +man/man3/XtSetErrorMsgHandler.3.gz +man/man3/XtSetEventDispatcher.3.gz +man/man3/XtSetKeyTranslator.3.gz +man/man3/XtSetKeyboardFocus.3.gz +man/man3/XtSetLanguageProc.3.gz +man/man3/XtSetMappedWhenManaged.3.gz +man/man3/XtSetMultiClickTime.3.gz +man/man3/XtSetSelectionParameters.3.gz +man/man3/XtSetSelectionTimeout.3.gz +man/man3/XtSetSensitive.3.gz +man/man3/XtSetSubvalues.3.gz +man/man3/XtSetTypeConverter.3.gz +man/man3/XtSetValues.3.gz +man/man3/XtSetWMColormapWindows.3.gz +man/man3/XtSetWarningHandler.3.gz +man/man3/XtSetWarningMsgHandler.3.gz +man/man3/XtStringConversionWarning.3.gz +man/man3/XtSuperclass.3.gz +man/man3/XtToolkitInitialize.3.gz +man/man3/XtToolkitThreadInitialize.3.gz +man/man3/XtTranslateCoords.3.gz +man/man3/XtTranslateKeycode.3.gz +man/man3/XtUngrabButton.3.gz +man/man3/XtUngrabKey.3.gz +man/man3/XtUngrabKeyboard.3.gz +man/man3/XtUngrabPointer.3.gz +man/man3/XtUninstallTranslations.3.gz +man/man3/XtUnmanageChild.3.gz +man/man3/XtUnmanageChildren.3.gz +man/man3/XtUnmapWidget.3.gz +man/man3/XtUnrealizeWidget.3.gz +man/man3/XtUnregisterDrawable.3.gz +man/man3/XtVaAppCreateShell.3.gz +man/man3/XtVaAppInitialize.3.gz +man/man3/XtVaCreateArgsList.3.gz +man/man3/XtVaCreateManagedWidget.3.gz +man/man3/XtVaCreatePopupShell.3.gz +man/man3/XtVaCreateWidget.3.gz +man/man3/XtVaGetApplicationResources.3.gz +man/man3/XtVaGetSubresources.3.gz +man/man3/XtVaGetSubvalues.3.gz +man/man3/XtVaGetValues.3.gz +man/man3/XtVaOpenApplication.3.gz +man/man3/XtVaSetSubvalues.3.gz +man/man3/XtVaSetValues.3.gz +man/man3/XtWarning.3.gz +man/man3/XtWarningMsg.3.gz +man/man3/XtWidgetToApplicationContext.3.gz +man/man3/XtWindow.3.gz +man/man3/XtWindowOfObject.3.gz +man/man3/XtWindowToWidget.3.gz diff --git a/x11/fstobdf/Makefile b/x11/fstobdf/Makefile index 78c0703..23f9800 100644 --- a/x11/fstobdf/Makefile +++ b/x11/fstobdf/Makefile @@ -10,9 +10,6 @@ COMMENT= Generate BDF font from X font server XORG_CAT= app USE_XORG= x11 libfs -PLIST_FILES= bin/fstobdf +PLIST_FILES= bin/fstobdf man/man1/fstobdf.1.gz -MAN1= fstobdf.1 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXScrnSaver/Makefile b/x11/libXScrnSaver/Makefile index e83a276..5676b8c 100644 --- a/x11/libXScrnSaver/Makefile +++ b/x11/libXScrnSaver/Makefile @@ -10,18 +10,4 @@ COMMENT= The XScrnSaver library XORG_CAT= lib USE_XORG= x11 xext xextproto scrnsaverproto:both -MAN3= Xss.3 \ - XScreenSaverAllocInfo.3 \ - XScreenSaverGetRegistered.3 \ - XScreenSaverQueryExtension.3 \ - XScreenSaverQueryInfo.3 \ - XScreenSaverQueryVersion.3 \ - XScreenSaverRegister.3 \ - XScreenSaverSelectInput.3 \ - XScreenSaverSetAttributes.3 \ - XScreenSaverSuspend.3 \ - XScreenSaverUnregister.3 \ - XScreenSaverUnsetAttributes.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXScrnSaver/pkg-plist b/x11/libXScrnSaver/pkg-plist index 505b19d..01aed87 100644 --- a/x11/libXScrnSaver/pkg-plist +++ b/x11/libXScrnSaver/pkg-plist @@ -4,4 +4,16 @@ lib/libXss.so lib/libXss.la lib/libXss.a libdata/pkgconfig/xscrnsaver.pc +man/man3/Xss.3.gz +man/man3/XScreenSaverAllocInfo.3.gz +man/man3/XScreenSaverGetRegistered.3.gz +man/man3/XScreenSaverQueryExtension.3.gz +man/man3/XScreenSaverQueryInfo.3.gz +man/man3/XScreenSaverQueryVersion.3.gz +man/man3/XScreenSaverRegister.3.gz +man/man3/XScreenSaverSelectInput.3.gz +man/man3/XScreenSaverSetAttributes.3.gz +man/man3/XScreenSaverSuspend.3.gz +man/man3/XScreenSaverUnregister.3.gz +man/man3/XScreenSaverUnsetAttributes.3.gz @dirrmtry include/X11/extensions diff --git a/x11/libXau/Makefile b/x11/libXau/Makefile index 4ee84d1..4578133 100644 --- a/x11/libXau/Makefile +++ b/x11/libXau/Makefile @@ -11,12 +11,7 @@ COMMENT= Authentication Protocol library for X11 XORG_CAT= lib USE_XORG= xproto:both -MAN3= Xau.3 XauDisposeAuth.3 XauFileName.3 XauGetAuthByAddr.3 \ - XauGetBestAuthByAddr.3 XauLockAuth.3 XauReadAuth.3 \ - XauUnlockAuth.3 XauWriteAuth.3 - -NO_STAGE= yes post-install: - ${LN} -sf ${PREFIX}/lib/libXau.so.6 ${PREFIX}/lib/libXau.so.0 + ${LN} -sf ${PREFIX}/lib/libXau.so.6 ${STAGEDIR}${PREFIX}/lib/libXau.so.0 .include <bsd.port.mk> diff --git a/x11/libXau/pkg-plist b/x11/libXau/pkg-plist index f46f0a8..38e98d0 100644 --- a/x11/libXau/pkg-plist +++ b/x11/libXau/pkg-plist @@ -5,3 +5,12 @@ lib/libXau.so lib/libXau.so.0 lib/libXau.so.6 libdata/pkgconfig/xau.pc +man/man3/Xau.3.gz +man/man3/XauDisposeAuth.3.gz +man/man3/XauFileName.3.gz +man/man3/XauGetAuthByAddr.3.gz +man/man3/XauGetBestAuthByAddr.3.gz +man/man3/XauLockAuth.3.gz +man/man3/XauReadAuth.3.gz +man/man3/XauUnlockAuth.3.gz +man/man3/XauWriteAuth.3.gz diff --git a/x11/libXcomposite/Makefile b/x11/libXcomposite/Makefile index 04477a5..932a189 100644 --- a/x11/libXcomposite/Makefile +++ b/x11/libXcomposite/Makefile @@ -11,18 +11,5 @@ COMMENT= X Composite extension library XORG_CAT= lib USE_XORG= compositeproto:both x11 xfixes xext fixesproto xproto:both -MAN3= Xcomposite.3 \ - XCompositeQueryExtension.3 \ - XCompositeQueryVersion.3 \ - XCompositeVersion.3 \ - XCompositeRedirectWindow.3 \ - XCompositeRedirectSubwindows.3 \ - XCompositeUnredirectWindow.3 \ - XCompositeUnredirectSubwindows.3 \ - XCompositeCreateRegionFromBorderClip.3 \ - XCompositeNameWindowPixmap.3 \ - XCompositeGetOverlayWindow.3 \ - XCompositeReleaseOverlayWindow.3 -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXcomposite/pkg-plist b/x11/libXcomposite/pkg-plist index af59654..42f1227 100644 --- a/x11/libXcomposite/pkg-plist +++ b/x11/libXcomposite/pkg-plist @@ -4,4 +4,16 @@ lib/libXcomposite.la lib/libXcomposite.so lib/libXcomposite.so.1 libdata/pkgconfig/xcomposite.pc +man/man3/Xcomposite.3.gz +man/man3/XCompositeQueryExtension.3.gz +man/man3/XCompositeQueryVersion.3.gz +man/man3/XCompositeVersion.3.gz +man/man3/XCompositeRedirectWindow.3.gz +man/man3/XCompositeRedirectSubwindows.3.gz +man/man3/XCompositeUnredirectWindow.3.gz +man/man3/XCompositeUnredirectSubwindows.3.gz +man/man3/XCompositeCreateRegionFromBorderClip.3.gz +man/man3/XCompositeNameWindowPixmap.3.gz +man/man3/XCompositeGetOverlayWindow.3.gz +man/man3/XCompositeReleaseOverlayWindow.3.gz @dirrmtry include/X11/extensions diff --git a/x11/libXcursor/Makefile b/x11/libXcursor/Makefile index f4ef75c..7d4c122 100644 --- a/x11/libXcursor/Makefile +++ b/x11/libXcursor/Makefile @@ -16,38 +16,4 @@ USE_XORG= xrender x11 xfixes fixesproto xproto:both \ CONFIGURE_ARGS= --with-icondir=${PREFIX}/lib/X11/icons -MAN3= Xcursor.3 \ - XcursorImageCreate.3 \ - XcursorImageDestroy.3 \ - XcursorImagesCreate.3 \ - XcursorImagesDestroy.3 \ - XcursorCursorsCreate.3 \ - XcursorCursorsDestroy.3 \ - XcursorXcFileLoadImage.3 \ - XcursorXcFileLoadImages.3 \ - XcursorXcFileLoadAllImages.3 \ - XcursorXcFileLoad.3 \ - XcursorXcFileSave.3 \ - XcursorFilenameLoadImage.3 \ - XcursorFilenameLoadImages.3 \ - XcursorFilenameLoadAllImages.3 \ - XcursorFilenameLoad.3 \ - XcursorFilenameSaveImages.3 \ - XcursorFilenameSave.3 \ - XcursorLibraryLoadImage.3 \ - XcursorLibraryLoadImages.3 \ - XcursorFilenameLoadCursor.3 \ - XcursorLibraryLoadCursor.3 \ - XcursorLibraryLoadCursors.3 \ - XcursorShapeLoadImage.3 \ - XcursorShapeLoadImages.3 \ - XcursorShapeLoadCursor.3 \ - XcursorShapeLoadCursors.3 \ - XcursorSupportsARGB.3 \ - XcursorSetDefaultSize.3 \ - XcursorGetDefaultSize.3 \ - XcursorSetTheme.3 \ - XcursorGetTheme.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXcursor/pkg-plist b/x11/libXcursor/pkg-plist index 0a6c480..786b7aa 100644 --- a/x11/libXcursor/pkg-plist +++ b/x11/libXcursor/pkg-plist @@ -4,4 +4,36 @@ lib/libXcursor.la lib/libXcursor.so lib/libXcursor.so.1 libdata/pkgconfig/xcursor.pc +man/man3/Xcursor.3.gz +man/man3/XcursorImageCreate.3.gz +man/man3/XcursorImageDestroy.3.gz +man/man3/XcursorImagesCreate.3.gz +man/man3/XcursorImagesDestroy.3.gz +man/man3/XcursorCursorsCreate.3.gz +man/man3/XcursorCursorsDestroy.3.gz +man/man3/XcursorXcFileLoadImage.3.gz +man/man3/XcursorXcFileLoadImages.3.gz +man/man3/XcursorXcFileLoadAllImages.3.gz +man/man3/XcursorXcFileLoad.3.gz +man/man3/XcursorXcFileSave.3.gz +man/man3/XcursorFilenameLoadImage.3.gz +man/man3/XcursorFilenameLoadImages.3.gz +man/man3/XcursorFilenameLoadAllImages.3.gz +man/man3/XcursorFilenameLoad.3.gz +man/man3/XcursorFilenameSaveImages.3.gz +man/man3/XcursorFilenameSave.3.gz +man/man3/XcursorLibraryLoadImage.3.gz +man/man3/XcursorLibraryLoadImages.3.gz +man/man3/XcursorFilenameLoadCursor.3.gz +man/man3/XcursorLibraryLoadCursor.3.gz +man/man3/XcursorLibraryLoadCursors.3.gz +man/man3/XcursorShapeLoadImage.3.gz +man/man3/XcursorShapeLoadImages.3.gz +man/man3/XcursorShapeLoadCursor.3.gz +man/man3/XcursorShapeLoadCursors.3.gz +man/man3/XcursorSupportsARGB.3.gz +man/man3/XcursorSetDefaultSize.3.gz +man/man3/XcursorGetDefaultSize.3.gz +man/man3/XcursorSetTheme.3.gz +man/man3/XcursorGetTheme.3.gz @dirrm include/X11/Xcursor diff --git a/x11/libXext/Makefile b/x11/libXext/Makefile index 8a7b8cb..48ec2fe 100644 --- a/x11/libXext/Makefile +++ b/x11/libXext/Makefile @@ -15,67 +15,4 @@ XORG_CAT= lib USE_XORG= xproto x11 xextproto:both xau CONFIGURE_ARGS+=--disable-specs --without-xmlto -MAN3= DBE.3 \ - DPMSCapable.3 \ - DPMSDisable.3 \ - DPMSEnable.3 \ - DPMSForceLevel.3 \ - DPMSGetTimeouts.3 \ - DPMSGetVersion.3 \ - DPMSInfo.3 \ - DPMSQueryExtension.3 \ - DPMSSetTimeouts.3 \ - XShape.3 \ - XShapeCombineMask.3 \ - XShapeCombineRectangles.3 \ - XShapeCombineRegion.3 \ - XShapeCombineShape.3 \ - XShapeGetRectangles.3 \ - XShapeInputSelected.3 \ - XShapeOffsetShape.3 \ - XShapeQueryExtension.3 \ - XShapeQueryExtents.3 \ - XShapeQueryVersion.3 \ - XShapeSelectInput.3 \ - XcupGetReservedColormapEntries.3 \ - XcupQueryVersion.3 \ - XcupStoreColors.3 \ - XdbeAllocateBackBufferName.3 \ - XdbeBeginIdiom.3 \ - XdbeDeallocateBackBufferName.3 \ - XdbeEndIdiom.3 \ - XdbeFreeVisualInfo.3 \ - XdbeGetBackBufferAttributes.3 \ - XdbeGetVisualInfo.3 \ - XdbeQueryExtension.3 \ - XdbeSwapBuffers.3 \ - Xevi.3 \ - XeviGetVisualInfo.3 \ - XeviQueryExtension.3 \ - XeviQueryVersion.3 \ - Xmbuf.3 \ - XmbufChangeBufferAttributes.3 \ - XmbufChangeWindowAttributes.3 \ - XmbufCreateBuffers.3 \ - XmbufCreateStereoWindow.3 \ - XmbufDestroyBuffers.3 \ - XmbufDisplayBuffers.3 \ - XmbufGetBufferAttributes.3 \ - XmbufGetScreenInfo.3 \ - XmbufGetVersion.3 \ - XmbufGetWindowAttributes.3 \ - XmbufQueryExtension.3 \ - XShm.3 \ - XShmAttach.3 \ - XShmCreateImage.3 \ - XShmCreatePixmap.3 \ - XShmDetach.3 \ - XShmGetEventBase.3 \ - XShmGetImage.3 \ - XShmPixmapFormat.3 \ - XShmPutImage.3 \ - XShmQueryExtension.3 \ - XShmQueryVersion.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXext/pkg-plist b/x11/libXext/pkg-plist index 61c829c..023b27a 100644 --- a/x11/libXext/pkg-plist +++ b/x11/libXext/pkg-plist @@ -19,4 +19,65 @@ include/X11/extensions/shape.h include/X11/extensions/sync.h include/X11/extensions/xtestext1.h libdata/pkgconfig/xext.pc +man/man3/DBE.3.gz +man/man3/DPMSCapable.3.gz +man/man3/DPMSDisable.3.gz +man/man3/DPMSEnable.3.gz +man/man3/DPMSForceLevel.3.gz +man/man3/DPMSGetTimeouts.3.gz +man/man3/DPMSGetVersion.3.gz +man/man3/DPMSInfo.3.gz +man/man3/DPMSQueryExtension.3.gz +man/man3/DPMSSetTimeouts.3.gz +man/man3/XShape.3.gz +man/man3/XShapeCombineMask.3.gz +man/man3/XShapeCombineRectangles.3.gz +man/man3/XShapeCombineRegion.3.gz +man/man3/XShapeCombineShape.3.gz +man/man3/XShapeGetRectangles.3.gz +man/man3/XShapeInputSelected.3.gz +man/man3/XShapeOffsetShape.3.gz +man/man3/XShapeQueryExtension.3.gz +man/man3/XShapeQueryExtents.3.gz +man/man3/XShapeQueryVersion.3.gz +man/man3/XShapeSelectInput.3.gz +man/man3/XcupGetReservedColormapEntries.3.gz +man/man3/XcupQueryVersion.3.gz +man/man3/XcupStoreColors.3.gz +man/man3/XdbeAllocateBackBufferName.3.gz +man/man3/XdbeBeginIdiom.3.gz +man/man3/XdbeDeallocateBackBufferName.3.gz +man/man3/XdbeEndIdiom.3.gz +man/man3/XdbeFreeVisualInfo.3.gz +man/man3/XdbeGetBackBufferAttributes.3.gz +man/man3/XdbeGetVisualInfo.3.gz +man/man3/XdbeQueryExtension.3.gz +man/man3/XdbeSwapBuffers.3.gz +man/man3/Xevi.3.gz +man/man3/XeviGetVisualInfo.3.gz +man/man3/XeviQueryExtension.3.gz +man/man3/XeviQueryVersion.3.gz +man/man3/Xmbuf.3.gz +man/man3/XmbufChangeBufferAttributes.3.gz +man/man3/XmbufChangeWindowAttributes.3.gz +man/man3/XmbufCreateBuffers.3.gz +man/man3/XmbufCreateStereoWindow.3.gz +man/man3/XmbufDestroyBuffers.3.gz +man/man3/XmbufDisplayBuffers.3.gz +man/man3/XmbufGetBufferAttributes.3.gz +man/man3/XmbufGetScreenInfo.3.gz +man/man3/XmbufGetVersion.3.gz +man/man3/XmbufGetWindowAttributes.3.gz +man/man3/XmbufQueryExtension.3.gz +man/man3/XShm.3.gz +man/man3/XShmAttach.3.gz +man/man3/XShmCreateImage.3.gz +man/man3/XShmCreatePixmap.3.gz +man/man3/XShmDetach.3.gz +man/man3/XShmGetEventBase.3.gz +man/man3/XShmGetImage.3.gz +man/man3/XShmPixmapFormat.3.gz +man/man3/XShmPutImage.3.gz +man/man3/XShmQueryExtension.3.gz +man/man3/XShmQueryVersion.3.gz @dirrmtry include/X11/extensions diff --git a/x11/libXfixes/Makefile b/x11/libXfixes/Makefile index 04eaad0..a2df62b 100644 --- a/x11/libXfixes/Makefile +++ b/x11/libXfixes/Makefile @@ -1,5 +1,5 @@ # Created by: Eric Anholt <anholt@FreeBSD.org> -# $FreeBSD: head/x11/libXfixes/Makefile 300897 2012-07-14 14:29:18Z beat $ +# $FreeBSD$ PORTNAME= libXfixes PORTVERSION= 5.0.1 @@ -13,7 +13,4 @@ LICENSE= MIT XORG_CAT= lib USE_XORG= x11 fixesproto:both xproto:both xextproto -MAN3= Xfixes.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXfixes/pkg-plist b/x11/libXfixes/pkg-plist index f8e8b57..43f539b 100644 --- a/x11/libXfixes/pkg-plist +++ b/x11/libXfixes/pkg-plist @@ -4,3 +4,4 @@ lib/libXfixes.la lib/libXfixes.so lib/libXfixes.so.3 libdata/pkgconfig/xfixes.pc +man/man3/Xfixes.3.gz diff --git a/x11/libXi/Makefile b/x11/libXi/Makefile index ecbfd00..d83f968 100644 --- a/x11/libXi/Makefile +++ b/x11/libXi/Makefile @@ -21,79 +21,4 @@ CONFIGURE_ARGS+=--disable-docs \ --without-asciidoc \ --without-xsltproc -MAN3= XAllowDeviceEvents.3 \ - XChangeDeviceControl.3 \ - XChangeDeviceDontPropagateList.3 \ - XChangeDeviceKeyMapping.3 \ - XChangeDeviceProperty.3 \ - XChangeFeedbackControl.3 \ - XChangeKeyboardDevice.3\ - XChangePointerDevice.3\ - XCloseDevice.3\ - XDeleteDeviceProperty.3\ - XDeviceBell.3\ - XDeviceTimeCoord.3\ - XFreeDeviceList.3\ - XGetDeviceButtonMapping.3\ - XGetDeviceControl.3\ - XGetDeviceDontPropagateList.3\ - XGetDeviceFocus.3\ - XGetDeviceKeyMapping.3 \ - XGetDeviceModifierMapping.3\ - XGetDeviceMotionEvents.3\ - XGetDeviceProperty.3\ - XGetExtensionVersion.3\ - XGetFeedbackControl.3\ - XGetSelectedExtensionEvents.3\ - XGrabDevice.3\ - XGrabDeviceButton.3\ - XGrabDeviceKey.3\ - XIBarrierReleasePointer.3\ - XIBarrierReleasePointers.3\ - XIChangeHierarchy.3\ - XIChangeProperty.3\ - XIDefineCursor.3\ - XIDeleteProperty.3\ - XIFreeDeviceInfo.3\ - XIGetClientPointer.3\ - XIGetFocus.3\ - XIGetProperty.3\ - XIGetSelectedEvents.3\ - XIGrabButton.3 \ - XIGrabDevice.3\ - XIGrabEnter.3\ - XIGrabFocusIn.3\ - XIGrabKeycode.3\ - XIGrabTouchBegin.3 \ - XIListProperties.3\ - XIQueryDevice.3\ - XIQueryPointer.3\ - XIQueryVersion.3\ - XISelectEvents.3\ - XISetClientPointer.3\ - XISetFocus.3\ - XIUndefineCursor.3\ - XIUngrabButton.3\ - XIUngrabDevice.3 \ - XIUngrabEnter.3 \ - XIUngrabFocusIn.3 \ - XIUngrabKeycode.3 \ - XIUngrabTouchBegin.3 \ - XIWarpPointer.3 \ - XListDeviceProperties.3 \ - XListInputDevices.3 \ - XOpenDevice.3 \ - XQueryDeviceState.3 \ - XSelectExtensionEvent.3\ - XSendExtensionEvent.3\ - XSetDeviceButtonMapping.3\ - XSetDeviceFocus.3\ - XSetDeviceMode.3\ - XSetDeviceModifierMapping.3 \ - XSetDeviceValuators.3 \ - XUngrabDevice.3 \ - XUngrabDeviceButton.3 \ - XUngrabDeviceKey.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXi/pkg-plist b/x11/libXi/pkg-plist index 0f704e2..51bbd1d 100644 --- a/x11/libXi/pkg-plist +++ b/x11/libXi/pkg-plist @@ -5,4 +5,77 @@ lib/libXi.la lib/libXi.so lib/libXi.so.6 libdata/pkgconfig/xi.pc +man/man3/XAllowDeviceEvents.3.gz +man/man3/XChangeDeviceControl.3.gz +man/man3/XChangeDeviceDontPropagateList.3.gz +man/man3/XChangeDeviceKeyMapping.3.gz +man/man3/XChangeDeviceProperty.3.gz +man/man3/XChangeFeedbackControl.3.gz +man/man3/XChangeKeyboardDevice.3.gz +man/man3/XChangePointerDevice.3.gz +man/man3/XCloseDevice.3.gz +man/man3/XDeleteDeviceProperty.3.gz +man/man3/XDeviceBell.3.gz +man/man3/XDeviceTimeCoord.3.gz +man/man3/XFreeDeviceList.3.gz +man/man3/XGetDeviceButtonMapping.3.gz +man/man3/XGetDeviceControl.3.gz +man/man3/XGetDeviceDontPropagateList.3.gz +man/man3/XGetDeviceFocus.3.gz +man/man3/XGetDeviceKeyMapping.3.gz +man/man3/XGetDeviceModifierMapping.3.gz +man/man3/XGetDeviceMotionEvents.3.gz +man/man3/XGetDeviceProperty.3.gz +man/man3/XGetExtensionVersion.3.gz +man/man3/XGetFeedbackControl.3.gz +man/man3/XGetSelectedExtensionEvents.3.gz +man/man3/XGrabDevice.3.gz +man/man3/XGrabDeviceButton.3.gz +man/man3/XGrabDeviceKey.3.gz +man/man3/XIBarrierReleasePointer.3.gz +man/man3/XIBarrierReleasePointers.3.gz +man/man3/XIChangeHierarchy.3.gz +man/man3/XIChangeProperty.3.gz +man/man3/XIDefineCursor.3.gz +man/man3/XIDeleteProperty.3.gz +man/man3/XIFreeDeviceInfo.3.gz +man/man3/XIGetClientPointer.3.gz +man/man3/XIGetFocus.3.gz +man/man3/XIGetProperty.3.gz +man/man3/XIGetSelectedEvents.3.gz +man/man3/XIGrabButton.3.gz +man/man3/XIGrabDevice.3.gz +man/man3/XIGrabEnter.3.gz +man/man3/XIGrabFocusIn.3.gz +man/man3/XIGrabKeycode.3.gz +man/man3/XIGrabTouchBegin.3.gz +man/man3/XIListProperties.3.gz +man/man3/XIQueryDevice.3.gz +man/man3/XIQueryPointer.3.gz +man/man3/XIQueryVersion.3.gz +man/man3/XISelectEvents.3.gz +man/man3/XISetClientPointer.3.gz +man/man3/XISetFocus.3.gz +man/man3/XIUndefineCursor.3.gz +man/man3/XIUngrabButton.3.gz +man/man3/XIUngrabDevice.3.gz +man/man3/XIUngrabEnter.3.gz +man/man3/XIUngrabFocusIn.3.gz +man/man3/XIUngrabKeycode.3.gz +man/man3/XIUngrabTouchBegin.3.gz +man/man3/XIWarpPointer.3.gz +man/man3/XListDeviceProperties.3.gz +man/man3/XListInputDevices.3.gz +man/man3/XOpenDevice.3.gz +man/man3/XQueryDeviceState.3.gz +man/man3/XSelectExtensionEvent.3.gz +man/man3/XSendExtensionEvent.3.gz +man/man3/XSetDeviceButtonMapping.3.gz +man/man3/XSetDeviceFocus.3.gz +man/man3/XSetDeviceMode.3.gz +man/man3/XSetDeviceModifierMapping.3.gz +man/man3/XSetDeviceValuators.3.gz +man/man3/XUngrabDevice.3.gz +man/man3/XUngrabDeviceButton.3.gz +man/man3/XUngrabDeviceKey.3.gz @dirrmtry include/X11/extensions diff --git a/x11/libXinerama/Makefile b/x11/libXinerama/Makefile index 2acc3be..e17c983 100644 --- a/x11/libXinerama/Makefile +++ b/x11/libXinerama/Makefile @@ -15,11 +15,4 @@ XORG_CAT= lib USE_XORG= x11 xext xextproto xineramaproto:both USE_AUTOTOOLS= libtool -MAN3= Xinerama.3 \ - XineramaQueryExtension.3 \ - XineramaQueryVersion.3 \ - XineramaIsActive.3 \ - XineramaQueryScreens.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXinerama/pkg-plist b/x11/libXinerama/pkg-plist index ff8b840..5e7b012 100644 --- a/x11/libXinerama/pkg-plist +++ b/x11/libXinerama/pkg-plist @@ -5,4 +5,9 @@ lib/libXinerama.la lib/libXinerama.so lib/libXinerama.so.1 libdata/pkgconfig/xinerama.pc +man/man3/Xinerama.3.gz +man/man3/XineramaQueryExtension.3.gz +man/man3/XineramaQueryVersion.3.gz +man/man3/XineramaIsActive.3.gz +man/man3/XineramaQueryScreens.3.gz @dirrmtry include/X11/extensions diff --git a/x11/libXp/Makefile b/x11/libXp/Makefile index 8c2a6f8..21e92ca 100644 --- a/x11/libXp/Makefile +++ b/x11/libXp/Makefile @@ -1,5 +1,5 @@ # Created by: Eric Anholt <anholt@FreeBSD.org> -# $FreeBSD: head/x11/libXp/Makefile 319055 2013-05-25 14:37:02Z zeising $ +# $FreeBSD$ PORTNAME= libXp PORTVERSION= 1.0.2 @@ -15,40 +15,4 @@ XORG_CAT= lib USE_XORG= x11 xext xextproto xau printproto:both USE_AUTOTOOLS= libtool -MAN3= XpCancelDoc.3 \ - XpCancelJob.3 \ - XpCancelPage.3 \ - XpCreateContext.3 \ - XpDestroyContext.3 \ - XpEndDoc.3 \ - XpEndJob.3 \ - XpEndPage.3 \ - XpFreePrinterList.3 \ - XpGetAttributes.3 \ - XpGetContext.3 \ - XpGetDocumentData.3 \ - XpGetImageResolution.3 \ - XpGetLocaleHinter.3 \ - XpGetOneAttribute.3 \ - XpGetPageDimensions.3 \ - XpGetPdmStartParams.3 \ - XpGetPrinterList.3 \ - XpGetScreenOfContext.3 \ - XpInputSelected.3 \ - XpPutDocumentData.3 \ - XpQueryExtension.3 \ - XpQueryScreens.3 \ - XpQueryVersion.3 \ - XpRehashPrinterList.3 \ - XpSelectInput.3 \ - XpSetAttributes.3 \ - XpSetContext.3 \ - XpSetImageResolution.3 \ - XpSetLocaleHinter.3 \ - XpStartDoc.3 \ - XpStartJob.3 \ - XpStartPage.3 \ - libXp.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXp/pkg-plist b/x11/libXp/pkg-plist index ba86a7f..0c120ff 100644 --- a/x11/libXp/pkg-plist +++ b/x11/libXp/pkg-plist @@ -3,3 +3,37 @@ lib/libXp.la lib/libXp.so lib/libXp.so.6 libdata/pkgconfig/xp.pc +man/man3/XpCancelDoc.3.gz +man/man3/XpCancelJob.3.gz +man/man3/XpCancelPage.3.gz +man/man3/XpCreateContext.3.gz +man/man3/XpDestroyContext.3.gz +man/man3/XpEndDoc.3.gz +man/man3/XpEndJob.3.gz +man/man3/XpEndPage.3.gz +man/man3/XpFreePrinterList.3.gz +man/man3/XpGetAttributes.3.gz +man/man3/XpGetContext.3.gz +man/man3/XpGetDocumentData.3.gz +man/man3/XpGetImageResolution.3.gz +man/man3/XpGetLocaleHinter.3.gz +man/man3/XpGetOneAttribute.3.gz +man/man3/XpGetPageDimensions.3.gz +man/man3/XpGetPdmStartParams.3.gz +man/man3/XpGetPrinterList.3.gz +man/man3/XpGetScreenOfContext.3.gz +man/man3/XpInputSelected.3.gz +man/man3/XpPutDocumentData.3.gz +man/man3/XpQueryExtension.3.gz +man/man3/XpQueryScreens.3.gz +man/man3/XpQueryVersion.3.gz +man/man3/XpRehashPrinterList.3.gz +man/man3/XpSelectInput.3.gz +man/man3/XpSetAttributes.3.gz +man/man3/XpSetContext.3.gz +man/man3/XpSetImageResolution.3.gz +man/man3/XpSetLocaleHinter.3.gz +man/man3/XpStartDoc.3.gz +man/man3/XpStartJob.3.gz +man/man3/XpStartPage.3.gz +man/man3/libXp.3.gz diff --git a/x11/libXpm/Makefile b/x11/libXpm/Makefile index 28e9d78..13ca108 100644 --- a/x11/libXpm/Makefile +++ b/x11/libXpm/Makefile @@ -13,7 +13,4 @@ LICENSE= MIT XORG_CAT= lib USE_XORG= xproto x11 xext xextproto xt -MAN1= cxpm.1 sxpm.1 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXpm/pkg-plist b/x11/libXpm/pkg-plist index 57c9469..aa4d174 100644 --- a/x11/libXpm/pkg-plist +++ b/x11/libXpm/pkg-plist @@ -6,3 +6,5 @@ lib/libXpm.la lib/libXpm.so lib/libXpm.so.4 libdata/pkgconfig/xpm.pc +man/man1/cxpm.1.gz +man/man1/sxpm.1.gz diff --git a/x11/libXrandr/Makefile b/x11/libXrandr/Makefile index 715bf5f..4dee0f8 100644 --- a/x11/libXrandr/Makefile +++ b/x11/libXrandr/Makefile @@ -13,21 +13,4 @@ LICENSE= MIT XORG_CAT= lib USE_XORG= x11 randrproto:both xext xextproto xrender renderproto xproto:both -MAN3= Xrandr.3 \ - XRRConfigCurrentConfiguration.3 \ - XRRConfigCurrentRate.3 \ - XRRConfigRates.3 \ - XRRConfigRotations.3 \ - XRRConfigSizes.3 \ - XRRConfigTimes.3 \ - XRRFreeScreenConfigInfo.3 \ - XRRGetScreenInfo.3 \ - XRRQueryExtension.3 \ - XRRQueryVersion.3 \ - XRRRootToScreen.3 \ - XRRSelectInput.3 \ - XRRSetScreenConfig.3 \ - XRRSetScreenConfigAndRate.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXrandr/pkg-plist b/x11/libXrandr/pkg-plist index 1b0f1f3..cd6f3df 100644 --- a/x11/libXrandr/pkg-plist +++ b/x11/libXrandr/pkg-plist @@ -4,3 +4,18 @@ lib/libXrandr.la lib/libXrandr.so lib/libXrandr.so.2 libdata/pkgconfig/xrandr.pc +man/man3/Xrandr.3.gz +man/man3/XRRConfigCurrentConfiguration.3.gz +man/man3/XRRConfigCurrentRate.3.gz +man/man3/XRRConfigRates.3.gz +man/man3/XRRConfigRotations.3.gz +man/man3/XRRConfigSizes.3.gz +man/man3/XRRConfigTimes.3.gz +man/man3/XRRFreeScreenConfigInfo.3.gz +man/man3/XRRGetScreenInfo.3.gz +man/man3/XRRQueryExtension.3.gz +man/man3/XRRQueryVersion.3.gz +man/man3/XRRRootToScreen.3.gz +man/man3/XRRSelectInput.3.gz +man/man3/XRRSetScreenConfig.3.gz +man/man3/XRRSetScreenConfigAndRate.3.gz diff --git a/x11/libXres/Makefile b/x11/libXres/Makefile index 38420c5..96f8f08 100644 --- a/x11/libXres/Makefile +++ b/x11/libXres/Makefile @@ -13,12 +13,4 @@ LICENSE= MIT XORG_CAT= lib USE_XORG= x11 xext xextproto resourceproto xproto:both -MAN3= XRes.3 \ - XResQueryClients.3 \ - XResQueryClientPixmapBytes.3 \ - XResQueryClientResources.3 \ - XResQueryExtension.3 \ - XResQueryVersion.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXres/pkg-plist b/x11/libXres/pkg-plist index ea8918a..1a5b780 100644 --- a/x11/libXres/pkg-plist +++ b/x11/libXres/pkg-plist @@ -4,3 +4,9 @@ lib/libXRes.la lib/libXRes.so lib/libXRes.so.1 libdata/pkgconfig/xres.pc +man/man3/XRes.3.gz +man/man3/XResQueryClients.3.gz +man/man3/XResQueryClientPixmapBytes.3.gz +man/man3/XResQueryClientResources.3.gz +man/man3/XResQueryExtension.3.gz +man/man3/XResQueryVersion.3.gz diff --git a/x11/libXtst/Makefile b/x11/libXtst/Makefile index 7ed7bf9..c3c1cad 100644 --- a/x11/libXtst/Makefile +++ b/x11/libXtst/Makefile @@ -17,19 +17,6 @@ USE_AUTOTOOLS= libtool CONFIGURE_ARGS+=--disable-specs --without-xmlto -MAN3= XTestCompareCurrentCursorWithWindow.3 \ - XTestCompareCursorWithWindow.3 \ - XTestDiscard.3 \ - XTestFakeButtonEvent.3 \ - XTestFakeKeyEvent.3 \ - XTestFakeMotionEvent.3 \ - XTestFakeRelativeMotionEvent.3 \ - XTestGrabControl.3 \ - XTestQueryExtension.3 \ - XTestSetGContextOfGC.3 \ - XTestSetVisualIDOfVisual.3 - -NO_STAGE= yes post-patch: @${REINPLACE_CMD} '/^SUBDIRS/,/^$$/ \ s/specs//' ${WRKSRC}/Makefile.in diff --git a/x11/libXtst/pkg-plist b/x11/libXtst/pkg-plist index 26d8788..e6ad938 100644 --- a/x11/libXtst/pkg-plist +++ b/x11/libXtst/pkg-plist @@ -5,4 +5,15 @@ lib/libXtst.la lib/libXtst.so lib/libXtst.so.6 libdata/pkgconfig/xtst.pc +man/man3/XTestCompareCurrentCursorWithWindow.3.gz +man/man3/XTestCompareCursorWithWindow.3.gz +man/man3/XTestDiscard.3.gz +man/man3/XTestFakeButtonEvent.3.gz +man/man3/XTestFakeKeyEvent.3.gz +man/man3/XTestFakeMotionEvent.3.gz +man/man3/XTestFakeRelativeMotionEvent.3.gz +man/man3/XTestGrabControl.3.gz +man/man3/XTestQueryExtension.3.gz +man/man3/XTestSetGContextOfGC.3.gz +man/man3/XTestSetVisualIDOfVisual.3.gz @dirrmtry include/X11/extensions diff --git a/x11/libXv/Makefile b/x11/libXv/Makefile index f1784fd..2c21649 100644 --- a/x11/libXv/Makefile +++ b/x11/libXv/Makefile @@ -14,32 +14,4 @@ LICENSE= MIT XORG_CAT= lib USE_XORG= x11 xext xextproto videoproto:both xproto:both -MAN3= Xv.3 \ - XvFreeAdaptorInfo.3 \ - XvFreeEncodingInfo.3 \ - XvCreateImage.3 \ - XvGetPortAttribute.3 \ - XvGetStill.3 \ - XvGetVideo.3 \ - XvGrabPort.3 \ - XvListImageFormats.3 \ - XvPutImage.3 \ - XvPortNotify.3 \ - XvPutStill.3 \ - XvPutVideo.3 \ - XvQueryAdaptors.3 \ - XvQueryBestSize.3 \ - XvQueryEncodings.3 \ - XvQueryExtension.3 \ - XvQueryPortAttributes.3 \ - XvSelectPortNotify.3 \ - XvSelectVideoNotify.3 \ - XvSetPortAttribute.3 \ - XvShmCreateImage.3 \ - XvShmPutImage.3 \ - XvStopVideo.3 \ - XvUngrabPort.3 \ - XvVideoNotify.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXv/pkg-plist b/x11/libXv/pkg-plist index 6fb5643..9465ee2 100644 --- a/x11/libXv/pkg-plist +++ b/x11/libXv/pkg-plist @@ -4,4 +4,30 @@ lib/libXv.la lib/libXv.so lib/libXv.so.1 libdata/pkgconfig/xv.pc +man/man3/Xv.3.gz +man/man3/XvFreeAdaptorInfo.3.gz +man/man3/XvFreeEncodingInfo.3.gz +man/man3/XvCreateImage.3.gz +man/man3/XvGetPortAttribute.3.gz +man/man3/XvGetStill.3.gz +man/man3/XvGetVideo.3.gz +man/man3/XvGrabPort.3.gz +man/man3/XvListImageFormats.3.gz +man/man3/XvPutImage.3.gz +man/man3/XvPortNotify.3.gz +man/man3/XvPutStill.3.gz +man/man3/XvPutVideo.3.gz +man/man3/XvQueryAdaptors.3.gz +man/man3/XvQueryBestSize.3.gz +man/man3/XvQueryEncodings.3.gz +man/man3/XvQueryExtension.3.gz +man/man3/XvQueryPortAttributes.3.gz +man/man3/XvSelectPortNotify.3.gz +man/man3/XvSelectVideoNotify.3.gz +man/man3/XvSetPortAttribute.3.gz +man/man3/XvShmCreateImage.3.gz +man/man3/XvShmPutImage.3.gz +man/man3/XvStopVideo.3.gz +man/man3/XvUngrabPort.3.gz +man/man3/XvVideoNotify.3.gz @dirrmtry include/X11/extensions diff --git a/x11/libXxf86dga/Makefile b/x11/libXxf86dga/Makefile index 4005033..f46f396 100644 --- a/x11/libXxf86dga/Makefile +++ b/x11/libXxf86dga/Makefile @@ -13,27 +13,4 @@ LICENSE= MIT XORG_CAT= lib USE_XORG= xproto x11 xextproto xext xf86dgaproto:both -MAN3= XDGA.3 \ - XDGAOpenFramebuffer.3 \ - XDGAChangePixmapMode.3 \ - XDGAQueryExtension.3 \ - XDGACloseFramebuffer.3 \ - XDGAQueryModes.3 \ - XDGACopyArea.3 \ - XDGAQueryVersion.3 \ - XDGACopyTransparentArea.3 \ - XDGASelectInput.3 \ - XDGACreateColormap.3 \ - XDGASetClientVersion.3 \ - XDGAFillRectangle.3 \ - XDGASetMode.3 \ - XDGAGetViewportStatus.3 \ - XDGASetViewport.3 \ - XDGAInstallColormap.3 \ - XDGASync.3 \ - XDGAKeyEventToXKeyEvent.3 \ - XF86DGA.3 \ - XFree86-DGA.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXxf86dga/pkg-plist b/x11/libXxf86dga/pkg-plist index 77c173b..23fb304 100644 --- a/x11/libXxf86dga/pkg-plist +++ b/x11/libXxf86dga/pkg-plist @@ -5,4 +5,25 @@ lib/libXxf86dga.la lib/libXxf86dga.so lib/libXxf86dga.so.1 libdata/pkgconfig/xxf86dga.pc +man/man3/XDGA.3.gz +man/man3/XDGAOpenFramebuffer.3.gz +man/man3/XDGAChangePixmapMode.3.gz +man/man3/XDGAQueryExtension.3.gz +man/man3/XDGACloseFramebuffer.3.gz +man/man3/XDGAQueryModes.3.gz +man/man3/XDGACopyArea.3.gz +man/man3/XDGAQueryVersion.3.gz +man/man3/XDGACopyTransparentArea.3.gz +man/man3/XDGASelectInput.3.gz +man/man3/XDGACreateColormap.3.gz +man/man3/XDGASetClientVersion.3.gz +man/man3/XDGAFillRectangle.3.gz +man/man3/XDGASetMode.3.gz +man/man3/XDGAGetViewportStatus.3.gz +man/man3/XDGASetViewport.3.gz +man/man3/XDGAInstallColormap.3.gz +man/man3/XDGASync.3.gz +man/man3/XDGAKeyEventToXKeyEvent.3.gz +man/man3/XF86DGA.3.gz +man/man3/XFree86-DGA.3.gz @dirrmtry include/X11/extensions diff --git a/x11/libXxf86vm/Makefile b/x11/libXxf86vm/Makefile index aec047e..4593ad5 100644 --- a/x11/libXxf86vm/Makefile +++ b/x11/libXxf86vm/Makefile @@ -13,28 +13,4 @@ LICENSE= MIT XORG_CAT= lib USE_XORG= xproto x11 xextproto xext xf86vidmodeproto:both -MAN3= XF86VM.3 \ - XF86VidModeLockModeSwitch.3 \ - XF86VidModeDeleteModeLine.3 \ - XF86VidModeModModeLine.3 \ - XF86VidModeGetAllModeLines.3 \ - XF86VidModeQueryExtension.3 \ - XF86VidModeGetDotClocks.3 \ - XF86VidModeQueryVersion.3 \ - XF86VidModeGetGamma.3 \ - XF86VidModeSetClientVersion.3 \ - XF86VidModeGetGammaRamp.3 \ - XF86VidModeSetGamma.3 \ - XF86VidModeGetGammaRampSize.3 \ - XF86VidModeSetGammaRamp.3 \ - XF86VidModeGetModeLine.3 \ - XF86VidModeSetViewPort.3 \ - XF86VidModeGetMonitor.3 \ - XF86VidModeSwitchMode.3 \ - XF86VidModeGetPermissions.3 \ - XF86VidModeSwitchToMode.3 \ - XF86VidModeGetViewPort.3 \ - XF86VidModeValidateModeLine.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libXxf86vm/pkg-plist b/x11/libXxf86vm/pkg-plist index 17f8d37..050fb6c 100644 --- a/x11/libXxf86vm/pkg-plist +++ b/x11/libXxf86vm/pkg-plist @@ -4,4 +4,26 @@ lib/libXxf86vm.la lib/libXxf86vm.so lib/libXxf86vm.so.1 libdata/pkgconfig/xxf86vm.pc +man/man3/XF86VM.3.gz +man/man3/XF86VidModeLockModeSwitch.3.gz +man/man3/XF86VidModeDeleteModeLine.3.gz +man/man3/XF86VidModeModModeLine.3.gz +man/man3/XF86VidModeGetAllModeLines.3.gz +man/man3/XF86VidModeQueryExtension.3.gz +man/man3/XF86VidModeGetDotClocks.3.gz +man/man3/XF86VidModeQueryVersion.3.gz +man/man3/XF86VidModeGetGamma.3.gz +man/man3/XF86VidModeSetClientVersion.3.gz +man/man3/XF86VidModeGetGammaRamp.3.gz +man/man3/XF86VidModeSetGamma.3.gz +man/man3/XF86VidModeGetGammaRampSize.3.gz +man/man3/XF86VidModeSetGammaRamp.3.gz +man/man3/XF86VidModeGetModeLine.3.gz +man/man3/XF86VidModeSetViewPort.3.gz +man/man3/XF86VidModeGetMonitor.3.gz +man/man3/XF86VidModeSwitchMode.3.gz +man/man3/XF86VidModeGetPermissions.3.gz +man/man3/XF86VidModeSwitchToMode.3.gz +man/man3/XF86VidModeGetViewPort.3.gz +man/man3/XF86VidModeValidateModeLine.3.gz @dirrmtry include/X11/extensions diff --git a/x11/libdmx/Makefile b/x11/libdmx/Makefile index 5ffb20b..2c209dd 100644 --- a/x11/libdmx/Makefile +++ b/x11/libdmx/Makefile @@ -11,23 +11,4 @@ COMMENT= DMX extension library XORG_CAT= lib USE_XORG= x11 xext xextproto dmxproto:both -MAN3= DMX.3 \ - DMXAddInput.3 \ - DMXAddScreen.3 \ - DMXChangeDesktopAttributes.3 \ - DMXChangeScreensAttributes.3 \ - DMXForceWindowCreation.3 \ - DMXGetDesktopAttributes.3 \ - DMXGetInputAttributes.3 \ - DMXGetInputCount.3 \ - DMXGetScreenAttributes.3 \ - DMXGetScreenCount.3 \ - DMXGetWindowAttributes.3 \ - DMXQueryExtension.3 \ - DMXQueryVersion.3 \ - DMXRemoveInput.3 \ - DMXRemoveScreen.3 \ - DMXSync.3 - -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/libdmx/pkg-plist b/x11/libdmx/pkg-plist index 933f89e..f6cbd33 100644 --- a/x11/libdmx/pkg-plist +++ b/x11/libdmx/pkg-plist @@ -4,4 +4,21 @@ lib/libdmx.la lib/libdmx.so lib/libdmx.so.1 libdata/pkgconfig/dmx.pc +man/man3/DMX.3.gz +man/man3/DMXAddInput.3.gz +man/man3/DMXAddScreen.3.gz +man/man3/DMXChangeDesktopAttributes.3.gz +man/man3/DMXChangeScreensAttributes.3.gz +man/man3/DMXForceWindowCreation.3.gz +man/man3/DMXGetDesktopAttributes.3.gz +man/man3/DMXGetInputAttributes.3.gz +man/man3/DMXGetInputCount.3.gz +man/man3/DMXGetScreenAttributes.3.gz +man/man3/DMXGetScreenCount.3.gz +man/man3/DMXGetWindowAttributes.3.gz +man/man3/DMXQueryExtension.3.gz +man/man3/DMXQueryVersion.3.gz +man/man3/DMXRemoveInput.3.gz +man/man3/DMXRemoveScreen.3.gz +man/man3/DMXSync.3.gz @dirrmtry include/X11/extensions diff --git a/x11/pixman/Makefile b/x11/pixman/Makefile index 4040240..4787c11 100644 --- a/x11/pixman/Makefile +++ b/x11/pixman/Makefile @@ -12,6 +12,7 @@ USE_PERL5= build XORG_CAT= lib USE_AUTOTOOLS= libtool CONFIGURE_ARGS= --disable-gtk +USE_GNOME= ltverhack:30 OPTIONS_DEFINE= SIMD diff --git a/x11/pixman/pkg-plist b/x11/pixman/pkg-plist index 8b752f5..139159f 100644 --- a/x11/pixman/pkg-plist +++ b/x11/pixman/pkg-plist @@ -3,6 +3,6 @@ include/pixman-1/pixman.h lib/libpixman-1.a lib/libpixman-1.la lib/libpixman-1.so -lib/libpixman-1.so.32 +lib/libpixman-1.so.30 libdata/pkgconfig/pixman-1.pc @dirrm include/pixman-1 diff --git a/x11/xcb-proto/files/patch-src_sync.xml b/x11/xcb-proto/files/patch-src_sync.xml new file mode 100644 index 0000000..cc53068 --- /dev/null +++ b/x11/xcb-proto/files/patch-src_sync.xml @@ -0,0 +1,50 @@ +From 9c343995eacdc39db2ec7f93cbeab00c88a55026 Mon Sep 17 00:00:00 2001 +From: Peter Harris <pharris@opentext.com> +Date: Fri, 15 Nov 2013 16:07:39 +0000 +Subject: sync: Add missing namespace for the INT64 struct + +Signed-off-by: Peter Harris <pharris@opentext.com> +Reviewed-By: Daniel Martin <consume.noise@gmail.com> +--- +diff --git a/src/sync.xml b/src/sync.xml +index bc07c5b..dd70a08 100644 +--- src/sync.xml ++++ src/sync.xml +@@ -147,7 +147,7 @@ for licensing information. + </bitcase> + <bitcase> + <enumref ref="CA">Value</enumref> +- <field type="INT64" name="value" /> ++ <field type="sync:INT64" name="value" /> + </bitcase> + <bitcase> + <enumref ref="CA">TestType</enumref> +@@ -155,7 +155,7 @@ for licensing information. + </bitcase> + <bitcase> + <enumref ref="CA">Delta</enumref> +- <field type="INT64" name="delta" /> ++ <field type="sync:INT64" name="delta" /> + </bitcase> + <bitcase> + <enumref ref="CA">Events</enumref> +@@ -179,7 +179,7 @@ for licensing information. + </bitcase> + <bitcase> + <enumref ref="CA">Value</enumref> +- <field type="INT64" name="value" /> ++ <field type="sync:INT64" name="value" /> + </bitcase> + <bitcase> + <enumref ref="CA">TestType</enumref> +@@ -187,7 +187,7 @@ for licensing information. + </bitcase> + <bitcase> + <enumref ref="CA">Delta</enumref> +- <field type="INT64" name="delta" /> ++ <field type="sync:INT64" name="delta" /> + </bitcase> + <bitcase> + <enumref ref="CA">Events</enumref> +-- +cgit v0.9.0.2-2-gbebe diff --git a/x11/xorg-apps/Makefile b/x11/xorg-apps/Makefile index 52121bb..77be001 100644 --- a/x11/xorg-apps/Makefile +++ b/x11/xorg-apps/Makefile @@ -27,10 +27,9 @@ COMPONENTS+= x11-wm/twm:twm x11-clocks/xclock:xclock xinit xterm NO_BUILD= yes -NO_STAGE= yes do-install: - ${MKDIR} ${PREFIX}/libdata/xorg - ${TOUCH} ${PREFIX}/libdata/xorg/apps + ${MKDIR} ${STAGEDIR}${PREFIX}/libdata/xorg + ${TOUCH} ${STAGEDIR}${PREFIX}/libdata/xorg/apps .for comp in ${COMPONENTS} OPTIONS_DEFINE+= ${comp:C/:.*//:C/.*\///:U} diff --git a/x11/xorg-docs/Makefile b/x11/xorg-docs/Makefile index 6642225..b6549dd 100644 --- a/x11/xorg-docs/Makefile +++ b/x11/xorg-docs/Makefile @@ -8,11 +8,8 @@ CATEGORIES= x11 MAINTAINER= x11@FreeBSD.org COMMENT= X.org documentation files -MAN7= X.7 Standards.7 XProjectTeam.7 Consortium.7 Xsecurity.7 XOrgFoundation.7 - CONFIGURE_ARGS+= --without-xmlto --without-fop --disable-specs XORG_CAT= doc -NO_STAGE= yes .include <bsd.port.mk> diff --git a/x11/xorg-docs/pkg-plist b/x11/xorg-docs/pkg-plist index 43c3bc4..dcbfbc2 100644 --- a/x11/xorg-docs/pkg-plist +++ b/x11/xorg-docs/pkg-plist @@ -1,3 +1,9 @@ +man/man7/X.7.gz +man/man7/Standards.7.gz +man/man7/XProjectTeam.7.gz +man/man7/Consortium.7.gz +man/man7/Xsecurity.7.gz +man/man7/XOrgFoundation.7.gz %%DOCSDIR%%/fonts/fonts.xml %%DOCSDIR%%/input/XKB-Config.xml %%DOCSDIR%%/input/XKB-Enhancing.xml diff --git a/x11/xorg-libraries/Makefile b/x11/xorg-libraries/Makefile index d3d1e00..db86bf7 100644 --- a/x11/xorg-libraries/Makefile +++ b/x11/xorg-libraries/Makefile @@ -54,9 +54,8 @@ RUN_DEPENDS= ${LOCALBASE}/libdata/pkgconfig/dmx.pc:${PORTSDIR}/x11/libdmx \ ${LOCALBASE}/libdata/pkgconfig/xxf86misc.pc:${PORTSDIR}/x11/libXxf86misc \ ${LOCALBASE}/libdata/pkgconfig/xxf86vm.pc:${PORTSDIR}/x11/libXxf86vm -NO_STAGE= yes do-install: - ${MKDIR} ${PREFIX}/libdata/xorg - ${TOUCH} ${PREFIX}/libdata/xorg/libraries + ${MKDIR} ${STAGEDIR}${PREFIX}/libdata/xorg + ${TOUCH} ${STAGEDIR}${PREFIX}/libdata/xorg/libraries .include <bsd.port.mk> diff --git a/x11/xorg/Makefile b/x11/xorg/Makefile index 58d5942..8ba46be 100644 --- a/x11/xorg/Makefile +++ b/x11/xorg/Makefile @@ -12,6 +12,7 @@ MAINTAINER= x11@FreeBSD.org COMMENT= X.Org complete distribution metaport NO_BUILD= yes +NO_MTREE= yes RUN_DEPENDS+= ${LOCALBASE}/libdata/pkgconfig/dri.pc:${PORTSDIR}/graphics/dri @@ -19,7 +20,6 @@ RUN_DEPENDS+= ${LOCALBASE}/libdata/pkgconfig/dri.pc:${PORTSDIR}/graphics/dri RUN_DEPENDS+= ${LOCALBASE}/libdata/pkgconfig/xbitmaps.pc:${PORTSDIR}/x11/xbitmaps \ ${LOCALBASE}/lib/X11/icons/handhelds/cursors/X_cursor:${PORTSDIR}/x11-themes/xcursor-themes -NO_STAGE= yes .include <bsd.port.options.mk> # doc |