Add current b.p.m

git-svn-id: https://trillian.chruetertee.ch/svn/ports/trunk@1410 058c260c-8361-11dd-a0ac-aa2bafec7d09

1 files changed, 6602 insertions, 0 deletions

diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk
new file mode 100644
index 0000000..3f361bf
--- /dev/null
+++ b/Mk/bsd.port.mk
@@ -0,0 +1,6602 @@
+#-*- tab-width: 4; -*-
+# ex:ts=4
+#
+# $FreeBSD: head/Mk/bsd.port.mk 347393 2014-03-07 14:41:37Z bapt $
+#	$NetBSD: $
+#
+#	bsd.port.mk - 940820 Jordan K. Hubbard.
+#	This file is in the public domain.
+#
+# Please view me with 4 column tabs!
+
+# This is the master file for the most common elements to all port
+# Makefile in the ports system.  For a more general overview of its
+# use and importance, see the Porter's Handbook.
+
+# There are two different types of "maintainers" in the ports framework.
+# The maintainer alias of the bsd.port.mk file is listed below in the
+# FreeBSD_MAINTAINER entry.  You should consult them if you have any
+# questions/suggestions regarding this file.
+#
+# DO NOT COMMIT CHANGES TO THIS FILE BY YOURSELF, EVEN IF YOU DID NOT GET
+# A RESPONSE FROM THE MAINTAINER(S) WITHIN A REASONABLE TIMEFRAME! ALL
+# UNAUTHORISED CHANGES WILL BE UNCONDITIONALLY REVERTED!
+
+FreeBSD_MAINTAINER=	portmgr@FreeBSD.org
+
+# For each port, the MAINTAINER variable is what you should consult for
+# contact information on the person(s) to contact if you have questions/
+# suggestions about that specific port.  By default (if no MAINTAINER
+# is listed), a port is maintained by the subscribers of the ports@FreeBSD.org
+# mailing list, and any correspondence should be directed there.
+#
+# MAINTAINER	- The e-mail address of the contact person for this port.
+#				  Default: ports@FreeBSD.org
+#
+# These are meta-variables that are automatically set to the system
+# you are running on.  These are provided in case you need to take
+# different actions for different values.
+#
+# ARCH			- The architecture of the target machine, such as would be
+#				  returned by "uname -p".
+# OPSYS			- Portability clause.  This is the operating system the
+#				  makefile is being used on.  Automatically set to
+#				  "FreeBSD," "NetBSD," or "OpenBSD" as appropriate.
+# OSREL			- The release version (numeric) of the operating system.
+# OSVERSION		- The value of __FreeBSD_version.
+#
+# This is the beginning of the list of all variables that need to be
+# defined in a port, listed in order that they should be included
+# to fit in with existing conventions.  (Exception: MAINTAINER actually
+# should appear after EXTRACT_ONLY and before MASTER_SITE_BACKUP).
+#
+# These variables are used to identify your port.
+#
+# PORTNAME		- Name of software.  Mandatory.
+# PORTVERSION	- Version of software.  Mandatory when no DISTVERSION is given.
+# PORTREVISION	- Version of port.  Optional.  Commonly used to indicate
+#				  that an update has happened that affects the port
+#				  framework itself, but not the distributed software
+#				  (e.g., local patches or Makefile changes).
+# PORTEPOCH		- Optional.  In certain odd cases, the PORTREVISION logic
+#				  can be fooled by ports that appear to go backwards
+#				  numerically (e.g. if port-0.3 is newer than port-1998).
+#				  In this case, incrementing PORTEPOCH forces the revision.
+#				  Default: 0 (no effect).
+# PKGNAME		- Always defined as
+#				  ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}.
+#				  Do not define this in your Makefile.
+# PKGNAMEPREFIX	- Prefix to specify that port is language-specific, etc.
+#				  Optional.
+# PKGNAMESUFFIX	- Suffix to specify compilation options or a version
+#				  designator (in case there are different versions of
+#				  one port as is the case for Tcl).
+#				  Optional.
+# PKGVERSION	- Always defined as ${PORTVERSION}.
+#				  Do not define this in your Makefile.
+# UNIQUENAME	- A name for your port that is globally unique.  By default,
+#				  this is set to ${LATEST_LINK} when LATEST_LINK is set,
+#				  and to ${PKGNAMEPREFIX}${PORTNAME} otherwise.
+# DISTVERSION	- Vendor version of the distribution.
+#				  Default: ${PORTVERSION}
+# DISTNAME		- Name of port or distribution used in generating
+#				  WRKSRC and DISTFILES below.
+#				  Default:
+#				  ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION}${DISTVERSIONSUFFIX}
+# CATEGORIES	- A list of descriptive categories into which this port falls.
+#				  Mandatory.
+#
+# These variable describe how to fetch files required for building the port.
+#
+# DISTFILES		- Name(s) of archive file(s) containing distribution.
+#				  Set this to an empty string if the port doesn't require it.
+#				  Default: ${DISTNAME}${EXTRACT_SUFX}
+# EXTRACT_SUFX	- Suffix for archive names
+#				  You never have to set both DISTFILES and EXTRACT_SUFX.
+#				  Default: .tar.bz2 if USE_BZIP2 is set, .lzh if USE_LHA is set,
+#				  .zip if USE_ZIP is set, .tar.xz if USE_XZ is set, .tar.gz
+#				  otherwise).
+# MASTER_SITES	- Primary location(s) for distribution files if not found
+#				  locally.  See bsd.sites.mk for common choices for
+#				  MASTER_SITES.
+# MASTER_SITE_SUBDIR
+#				- Subdirectory of MASTER_SITES. Will sometimes need to be
+#				  set to ${PORTNAME} for (e.g.) MASTER_SITE_SOURCEFORGE.
+#				  Only guaranteed to work for choices of ${MASTER_SITES}
+#				  defined in bsd.sites.mk.
+#				  Default: not set.
+# PATCHFILES	- Name(s) of additional files that contain distribution
+#				  patches. Make will look for them at PATCH_SITES (see below).
+#				  They will automatically be uncompressed before patching if
+#				  the names end with ".gz", ".bz2" or ".Z".
+#				  For each file you can optionally specify a strip
+#				  flag of patch(1) after a colon if it has a different
+#				  base directory, e.g. "file1 file2:-p1 file3".
+#				  You can also use a :group at the end for matching up to
+#				  dist file groups. See Porters Handbook for more information.
+#				  Syntax: PATCHFILES= patch[:-pX][:group]
+#				  Default: not set.
+# PATCH_SITES	- Primary location(s) for distribution patch files
+#				  if not found locally.
+# DIST_SUBDIR	- Suffix to ${DISTDIR}.  If set, all ${DISTFILES} and
+#				  ${PATCHFILES} will be put in this subdirectory of
+#				  ${DISTDIR} (see below).  Also they will be fetched in this
+#				  subdirectory from FreeBSD mirror sites.
+# ALLFILES		- All of ${DISTFILES} and ${PATCHFILES}.
+# IGNOREFILES	- If set, don't perform checksum checks on these files.
+# NOFETCHFILES	- If set, don't download these files from the ${MASTER_SITES}
+#				  or ${MASTER_SITE_BACKUP} (but do from
+#				  ${MASTER_SITE_OVERRIDE})
+# EXTRACT_ONLY	- If set, a subset of ${DISTFILES} you want to
+#				  actually extract.
+# ALWAYS_KEEP_DISTFILES
+#				- If set, the package building cluster will save the distfiles
+#				  along with the packages. This may be required to comply with
+#				  some licenses, e.g. GPL in some cases.
+#				  Default: not set.
+#
+# (NOTE: by convention, the MAINTAINER entry (see above) should go here.)
+#
+# These variables are typically set in /etc/make.conf to indicate
+# the user's preferred location to fetch files from.  You should
+# rarely need to set these.
+#
+# MASTER_SITE_BACKUP
+#				- Backup location(s) for distribution files and patch
+#				  files if not found locally and ${MASTER_SITES}/${PATCH_SITES}
+#				  Default:
+#				  ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
+# MASTER_SITE_OVERRIDE
+#				- If set, override the MASTER_SITES setting with this
+#				  value.
+# MASTER_SITE_FREEBSD
+#				- If set, only use ${MASTER_SITE_BACKUP} for
+#				  MASTER_SITES.
+# CD_MOUNTPTS	- List of CDROM mountpoints to look for distfiles under.
+#				  This variable supercedes CD_MOUNTPT, which is
+#				  obsolete.
+#
+# Set these if your port should not be built under certain circumstances.
+# These are string variables; you should set them to the reason why
+# they are necessary.
+#
+# RESTRICTED	- Prevent the distribution of distfiles and packages to
+#				  the FTP sites or on CDROM (e.g. forbidden by license
+#				  considerations).
+# NO_CDROM		- Packages and distfiles may not go on CDROM (e.g. must
+#				  not be re-sold) but can go on FTP sites.
+# NO_PACKAGE	- Port should not be packaged for ftp sites or CDROMs,
+#				  but distfiles can be put on ftp sites and CDROMs.
+# FORBIDDEN		- Package build should not be attempted because of
+#				  security vulnerabilities.
+# LEGAL_TEXT	- Port has legal issues (e.g., special permission to distribute, lacks a license).
+# LEGAL_PACKAGE - Port has no legal issues but defines NO_PACKAGE
+# IGNORE		- Package build should be skipped entirely (e.g.
+#				  because of serious unfixable problems in the build,
+#				  because it cannot be manually fetched, etc).  Error
+#				  logs will not appear on pointyhat, so this should be
+#				  used sparingly.
+# BROKEN		- Port is believed to be broken.  Package builds can
+# 				  still be attempted using TRYBROKEN to test this
+#				  assumption.
+# BROKEN_${ARCH}  Port is believed to be broken on ${ARCH}. Package builds
+#				  can still be attempted using TRYBROKEN to test this
+#				  assumption.
+# DEPRECATED	- Port is deprecated to install. Advisory only.
+# EXPIRATION_DATE
+#				- If DEPRECATED is set, determines a date when
+#				  the port is planed to remove. The date format is
+#				  ISO 8601 (YYYY-MM-DD).
+#
+# DISABLE_VULNERABILITIES
+#				- If set, do not check if the port is listed in the
+#				  vulnerabilities database.
+#
+# In addition to RESTRICTED or NO_CDROM, if only a subset of distfiles
+# or patchfiles have redistribution restrictions, set the following
+# to the list of such files.
+#
+# RESTRICTED_FILES
+#				- List of files that cannot be redistributed.
+#				  Default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED
+#				  or NO_CDROM is set, empty otherwise.
+#
+# These variables are booleans, so you don't need to set them to the reason.
+#
+# IS_INTERACTIVE
+#				- Set this if your port needs to interact with the user
+#				  during any step in a package build.  User can then decide
+#				  to skip this port by setting ${BATCH}, or compiling only
+#				  the interactive ports by setting ${INTERACTIVE}.
+#				  Default: not set.
+# USE_SUBMAKE	- Set this if you want that each of the port's main 7 targets
+#				  (extract, patch, configure, build, stage, install and
+#				  package) to be executed in a separate make(1) process.
+#				  Useful when one of the stages needs to influence make(1)
+#				  variables of the later stages using ${WRKDIR}/Makefile.inc
+#				  generated on the fly.
+#				  Default: not set.
+#
+# NO_ARCH			- Set this if port is architecture neutral.
+#
+# Set these if your port only makes sense to certain architectures.
+# They are lists containing names for them (e.g., "amd64 i386").
+# (Defaults: not set.)
+#
+# ONLY_FOR_ARCHS
+#				- Only build ports if ${ARCH} matches one of these.
+# NOT_FOR_ARCHS	- Only build ports if ${ARCH} doesn't match one of these.
+# ONLY_FOR_ARCHS_REASON
+# ONLY_FOR_ARCHS_REASON_${ARCH}
+#				- Reason why it's only for ${ONLY_FOR_ARCHS}s
+# NOT_FOR_ARCHS_REASON
+# NOT_FOR_ARCHS_REASON_${ARCH}
+#				- Reason why it's not for ${NOT_FOR_ARCHS}s
+# IA32_BINARY_PORT
+#				- Set this instead of ONLY_FOR_ARCHS if the given port
+#				  fetches and installs compiled i386 binaries.
+#
+# Dependency checking.  Use these if your port requires another port
+# not in the list below.  (Default: empty.)
+#
+# EXTRACT_DEPENDS
+#				- A list of "path:dir[:target]" tuples of other ports this
+#				  package depends on in the "extract" stage.  "path" is
+#				  the name of a file if it starts with a slash (/), an
+#				  executable otherwise.  make will test for the existence
+#				  (if it is a full pathname) or search for it in your
+#				  $PATH (if it is an executable) and go into "dir" to do
+#				  a "make all install" if it's not found.  If the third
+#				  field ("target") exists, it will be used instead of
+#				  ${DEPENDS_TARGET}.  The first field also supports a
+#				  package name with a version range, in the form package>=1.2
+#				  if a particular version is desired.
+# PATCH_DEPENDS	- A list of "path:dir[:target]" tuples of other ports this
+#				  package depends on in the "patch" stage.  "path" is the
+#				  name of a file if it starts with a slash (/), an
+#				  executable otherwise.  make will test for the existence
+#				  (if it is a full pathname) or search for it in your
+#				  $PATH (if it is an executable) and go into "dir" to do
+#				  a "make all install" if it's not found.  If the third
+#				  field ("target") exists, it will be used instead of
+#				  ${DEPENDS_TARGET}.  The first field also supports a
+#				  package name with a version range, in the form package>=1.2
+#				  if a particular version is desired.
+# FETCH_DEPENDS	- A list of "path:dir[:target]" tuples of other ports this
+#				  package depends in the "fetch" stage.  "path" is the
+#				  name of a file if it starts with a slash (/), an
+#				  executable otherwise.  make will test for the
+#				  existence (if it is a full pathname) or search for
+#				  it in your $PATH (if it is an executable) and go
+#				  into "dir" to do a "make all install" if it's not
+#				  found.  If the third field ("target") exists, it will
+#				  be used instead of ${DEPENDS_TARGET}.  The first field
+#				  also supports a package name with a version range, in
+#				  the form package>=1.2 if a particular version is desired.
+# BUILD_DEPENDS	- A list of "path:dir[:target]" tuples of other ports this
+#				  package depends to build (between the "extract" and
+#				  "build" stages, inclusive).  The test done to
+#				  determine the existence of the dependency is the
+#				  same as FETCH_DEPENDS.  If the third field ("target")
+#				  exists, it will be used instead of ${DEPENDS_TARGET}.
+# RUN_DEPENDS	- A list of "path:dir[:target]" tuples of other ports this
+#				  package depends to run.  The test done to determine
+#				  the existence of the dependency is the same as
+#				  FETCH_DEPENDS.  This will be checked during the
+#				  "install" stage and the name of the dependency will
+#				  be put into the package as well.  If the third field
+#				  ("target") exists, it will be used instead of
+#				  ${DEPENDS_TARGET}.  The first field also supports a
+#				  package name with a version range, in the form package>=1.2
+#				  if a particular version is desired.
+# LIB_DEPENDS	- A list of "lib:dir[:target]" tuples of other ports this
+#				  package depends on.  "lib" is the name of a shared library.
+#				  make will use "ldconfig -r" to search for the library.
+#				  lib can contain extended regular expressions.
+# DEPENDS_TARGET
+#				- The default target to execute when a port is calling a
+#				  dependency.
+#				  Default: install
+#
+# These variables control options about how a port gets built and/or
+# are shorthand notations for common sets of dependencies.
+# Use these if your port uses some of the common software packages. By
+# convention these should be set to 'yes', although they only need to be
+# defined. Defaults: not set, unless explicitly indicated below.
+#
+# Note: the distinction between the USE_* and WANT_* variables, and the
+# WITH_* and WITHOUT_* variables, are that the former are restricted to
+# usage inside the ports framework, and the latter are reserved for user-
+# settable options.  (Setting USE_* in /etc/make.conf is always wrong).
+#
+# WITH_DEBUG            - If set, debugging flags are added to CFLAGS and the
+#                         binaries don't get stripped by INSTALL_PROGRAM or
+#                         INSTALL_LIB. Besides, individual ports might
+#                         add their specific to produce binaries for debugging
+#                         purposes. You can override the debug flags that are
+#                         passed to the compiler by setting DEBUG_FLAGS. It is
+#                         set to "-g" at default.
+#
+# WITH_DEBUG_PORTS		- A list of origins for which WITH_DEBUG will be set
+#
+# WITH_SSP_PORTS
+# 				- If set, SSP_FLAGS (defaults to -fstack-protector)
+#				  is added to CFLAGS and the necessary flags
+#				  are added to LDFLAGS. Note that SSP_UNSAFE
+#				  can be used in Makefiles by port maintainers
+#				  if a port breaks with it (it should be
+#				  extremely rare).
+#
+# USE_BZIP2		- If set, this port tarballs use bzip2, not gzip, for
+#				  compression.
+# USE_LHA		- If set, this port distfile uses lha for compression
+# USE_XZ		- If set, this port tarballs use xz (or lzma)
+#				  for compression
+# USE_ZIP		- If set, this port distfile uses zip, not tar w/[bg]zip
+#				  for compression.
+# USE_GCC		- If set, this port requires this version of gcc, either in
+#				  the system or installed from a port.
+# USE_CSTD		- Override the default C language standard (gnu89, gnu99)
+# USE_CXXSTD	  Override the default C++ language standard
+# USE_BINUTILS	- Use binutils suite from port instead of the version in base.
+# CFLAGS_${ARCH}  Append the cflags to CFLAGS only on the specified architecture
+# CXXFLAGS_${ARCH}
+#				 Append the cxxflags to CXXFLAGS only on the specified architecture
+##
+# USE_GHOSTSCRIPT
+#				- If set, this port needs ghostscript to both
+#				  build and run.  If a number is specified,
+#				  the specified version will be used.
+#				  The valid value is '7', '8', or '9' in that case.
+# USE_GHOSTSCRIPT_BUILD
+#				- If set, this port needs ghostscript to build.
+# USE_GHOSTSCRIPT_RUN
+#				- If set, this port needs ghostscript to run.
+# GHOSTSCRIPT_PORT
+#				- The port that provides postscript functionality.
+#				  Some installations may wish to override the default
+#				  to specify a version without X11 and/or localized
+#				  versions for their nationality.
+#				  Default: print/ghostscript9
+# WITH_GHOSTSCRIPT_VER
+#				- If set, the specified version of ghostscript will be
+#				  used.  The valid value is "7", "8", or "9".  Note that
+#				  this is for users, not for port maintainers.  This
+#				  should not be used in Makefile.
+##
+# USE_GL		- A list of Mesa or GL related dependencies needed by the port.
+#				  Supported components are: egl, glesv2, glut, glu, glw, and gl.
+#				  If set to "yes", this is equivalent to "glu". Note that
+#				  glew and glut depend on glu, glw and glu depend on gl.
+##
+# USE_SDL		- If set, this port uses the sdl libraries.
+#				  See bsd.sdl.mk for more information.
+##
+# USE_OPENSSL	- If set, this port relies on the OpenSSL package.
+##
+# USE_OPENLDAP	- If set, this port uses the OpenLDAP libraries.
+#				  Implies: WANT_OPENLDAP_VER?=24
+# WANT_OPENLDAP_VER
+#				- Legal values are: 23, 24
+#				  If set to an unknown value, the port is marked BROKEN.
+# WANT_OPENLDAP_SASL
+#				- If set, the system should use OpenLDAP libraries
+#				  with SASL support.
+##
+# USE_AUTOTOOLS	- If set, this port uses various GNU autotools
+#				  (libtool, autoconf, autoheader, automake et al.)
+#				  See bsd.autotools.mk for more details.
+##
+# USE_SCONS		- If set, this port uses the Python-based SCons build system
+#				  See bsd.scons.mk for more details.
+##
+# USE_EFL		- If set, this port use EFL libraries.
+#				  Implies inclusion of bsd.efl.mk.  (Also see
+#				  that file for more information on USE_EFL_*).
+# USE_FPC		- If set, this port relies on the Free Pascal language.
+# 				  Implies inclusion of bsd.fpc.mk.  (Also see
+#				  that file for more information on WANT_FPC_*).
+# USE_JAVA		- If set, this port relies on the Java language.
+#				  Implies inclusion of bsd.java.mk.  (Also see
+#				  that file for more information on USE_JAVA_*).
+# USE_OCAML		- If set, this port relies on the OCaml language.
+#				  Implies inclusion of bsd.ocaml.mk.  (Also see
+#				  that file for more information on USE_OCAML*).
+# USE_PYTHON	- If set, this port relies on the Python language.
+#				  Implies inclusion of bsd.python.mk. (Also see
+#				  that file for more information on USE_PYTHON_*
+#				  and USE_PYDISTUTILS).
+# USE_RUBY		- If set, this port relies on the Ruby language.
+#				  Implies inclusion of bsd.ruby.mk.  (Also see
+#				  that file for more information on USE_RUBY_*).
+# USE_GNUSTEP	- If set, this port relies on the GNUstep system.
+#				  Implies the inclusion of bsd.gnustep.mk.
+#				  (Also see that file for more information on
+#				  USE_GNUSTEP_*).
+##
+# USE_GECKO		- If set, this port uses the Gecko/Mozilla product.
+#				  See bsd.gecko.mk for more details.
+##
+# USE_GNOME		- A list of the Gnome dependencies the port has (e.g.,
+#				  glib12, gtk12).  Implies that the port needs Gnome.
+#				  Implies inclusion of bsd.gnome.mk.  See bsd.gnome.mk
+#				  or http://www.FreeBSD.org/gnome/docs/porting.html
+#				  for more details.
+##
+# USE_MATE		- A list of the MATE dependencies the port has. Implies
+#				  that the port needs MATE. Implies inclusion of
+#				  bsd.mate.mk. See bsd.mate.mk for more details.
+##
+# USE_LUA		- If set, this port uses the Lua library and related
+#				  components. See bsd.lua.mk for more details.
+##
+# USE_WX		- If set, this port uses the WxWidgets library and related
+#				  components. See bsd.wx.mk for more details.
+##
+# USE_KDE4		- A list of the KDE 4 dependencies the port has (e.g.,
+#				  kdelibs, kdebase).  Implies that the port needs KDE.
+#				  Implies inclusion of bsd.kde4.mk.  See bsd.kde4.mk
+#				  for more details.
+#
+# USE_QT4		- A list of the Qt 4 dependencies the port has (e.g,
+#				  corelib, webkit).  Implies that the port needs Qt.
+#				  Implies the inclusion of bsd.qt.mk.  See bsd.qt.mk
+#				  for more details.
+#
+# USE_QT5		- A list of the Qt 5 dependencies the port has (e.g,
+#				  core, webkit).  Implies that the port needs Qt.
+#				  Implies the inclusion of bsd.qt.mk.  See bsd.qt.mk
+#				  for more details.
+#
+# USE_LINUX		- Set to yes to say the port needs the default linux base port.
+#				  Set to value <X>, if the port needs emulators/linux_base-<X>.
+#				  Implies appropriate settings for STRIP and STRIP_CMD.
+# USE_LINUX_PREFIX
+#				- controls the action of PREFIX (see above). Only use this
+#				  if the port is a linux infrastructure port (e.g. contains libs
+#				  or a sound server which supports the FreeBSD native one),
+#				  use the default or the X11 prefix if it's a leaf port
+#				  (e.g. a game or program).
+#				  Implies NO_MTREE=yes, and, if USE_LDCONFIG is defined:
+#				    - USE_LINUX=yes
+#				    - appropriate invocation of the Linux ldconfig
+# USE_LINUX_RPM	- Set to yes to pull in variables and targets useful to Linux
+#				  RPM ports.
+#				  Implies inclusion of bsd.linux-rpm.mk.
+#
+# LINUX_OSRELEASE	- Contains the value of compat.linux.osrelease sysctl.
+#				  Will be used to distinguish which linux
+#				  infrastructure ports should be used.
+#				  Valid values: 2.6.16.
+# AUTOMATIC_PLIST
+#				- Set to yes to enable automatic packing list generation.
+#				  Currently has no effect unless USE_LINUX_RPM is set.
+#
+# OVERRIDE_LINUX_BASE_PORT
+#				- This specifies the default linux base to use, for valid
+#				  values have a look at the description of USE_LINUX. This is
+#				  an user-only variable. Don't use it in any port, it's meant
+#				  to be used in make.conf.
+#
+# LINUX_BASE_PORT
+#				- This is a read-only variable, it gets set to a value which is
+#				  usable in *_DEPENDS (e.g. BUILD_DEPENDS=${LINUX_BASE_PORT}).
+#				  It honors USE_LINUX=foo and OVERRIDE_LINUX_BASE_PORT.
+##
+# USE_XORG			- Set to a list of X.org module dependencies.
+#				  Implies inclusion of bsd.xorg.mk.
+##
+# USE_TEX			- A list of the TeX dependencies the port has.
+#
+##
+# USE_RC_SUBR	- If set, the ports startup/shutdown script uses the common
+#				  routines found in /etc/rc.subr.
+#				  If this is set to a list of files, these files will be
+#				  automatically added to ${SUB_FILES}, some %%VAR%%'s will
+#				  automatically be expanded, they will be installed in
+#				  ${PREFIX}/etc/rc.d and added to the packing list.
+# USE_RCORDER	- List of rc.d startup scripts to be called early in the boot
+#				  process. This acts exactly like USE_RC_SUBR except that
+#				  scripts are installed in /etc/rc.d.
+#				  Because local rc.d scripts are included in the base rcorder
+#				  this option is not needed unless the port installs in the base.
+##
+# USE_APACHE	- If set, this port relies on an apache webserver.
+#
+# Conflict checking.  Use if your port cannot be installed at the same time as
+# another package.
+#
+# CONFLICTS		- A list of package name patterns that the port conflicts
+#				  with, separated by blanks.  The names may include shell
+#				  pattern meta-characters "*", "?", "[", "]", and "!".
+#				  Example: apache*-1.2* apache*-1.3.[012345] apache-*+ssl_*
+#
+# CONFLICTS_BUILD
+#				- Check conflict prior to the build.
+#
+# CONFLICTS_INSTALL
+#				- Check conflict prior to the installation stage.
+#
+# Various directory definitions and variables to control them.
+# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR.
+#
+# LOCALBASE		- Where non-X11 ports install things.
+#				  Default: /usr/local
+# LINUXBASE		- Where Linux ports install things.
+#				  Default: /compat/linux
+# PREFIX		- Where *this* port installs its files.
+#				  Default: ${LINUXBASE} if USE_LINUX_PREFIX is set,
+#				  otherwise ${LOCALBASE}
+#
+# IGNORE_PATH_CHECKS
+#				- There are some sanity checks against PREFIX.
+#				  You can disable these checks with defining
+#				  this variable, but this is not recommended!
+#				  Only do this if you really know what you are
+#				  doing.  These sanity checks are the following:
+#				    - PREFIX has to be an absolute path.
+#				    - PREFIX can't have a trailing slash.
+#
+# MASTERDIR		- Where the port finds patches, package files, etc.  Define
+#				  this is you have two or more ports that share most of the
+#				  files.
+#				  Default: ${.CURDIR}
+# PORTSDIR		- The root of the ports tree.
+#				  Default: /usr/ports
+# DISTDIR		- Where to search for and store copies of original sources
+#				  Default: ${PORTSDIR}/distfiles
+# PACKAGES		- A top level directory where all packages go (rather than
+#				  going locally to each port).
+#				  Default: ${PORTSDIR}/packages
+# WRKDIRPREFIX	- The place to root the temporary working directory
+#				  hierarchy.
+#				  Default: none
+# WRKDIR		- A temporary working directory that gets *clobbered* on clean
+#				  Default: ${WRKDIRPREFIX}${.CURDIR}/work
+# WRKSRC		- A subdirectory of ${WRKDIR} where the distribution actually
+#				  unpacks to.
+#				  Default: ${WRKDIR}/${DISTNAME} unless NO_WRKSUBDIR is set,
+#				  in which case simply ${WRKDIR}
+# WRKSRC_SUBDIR	- A subdirectory of ${WRKSRC} where the distribution actually
+#				  builds in.
+#				  Default: not set
+# NO_WRKSUBDIR	- Assume port unpacks directly into ${WRKDIR}.
+# PATCHDIR		- A directory containing any additional patches you made
+#				  to port this software to FreeBSD.
+#				  Default: ${MASTERDIR}/files
+# SCRIPTDIR		- A directory containing any auxiliary scripts
+#				  Default: ${MASTERDIR}/scripts
+# FILESDIR		- A directory containing any miscellaneous additional files.
+#				  Default: ${MASTERDIR}/files
+# PKGDIR		- A directory containing any package creation files.
+#				  Default: ${MASTERDIR}
+# SRC_BASE		- The root of the src tree.  (Some ports require this to get
+#				  kernel sources).  Default: /usr/src
+# UID_FILES		- A list of files containing information about registered UIDs.
+# 				  Note that files have decreasing priority.
+# GID_FILES		- A list of files containing information about registered GIDs.
+# 				  Note that files have decreasing priority.
+#
+# Variables that serve as convenient "aliases" for your *-install targets.
+# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin".
+#
+# INSTALL_PROGRAM
+#				- A command to install binary executables.  (By
+#				  default, also strips them, unless ${STRIP} is
+#				  overridden to be the empty string).
+# INSTALL_KLD	- As INSTALL_PROGRAM, but without the STRIP.
+# INSTALL_LIB	- As INSTALL_DATA, but also strips the file.
+# INSTALL_SCRIPT
+#				- A command to install executable scripts.
+# INSTALL_DATA	- A command to install sharable data.
+# INSTALL_MAN	- A command to install manpages.  May or not compress,
+#				  depending on the value of MANCOMPRESSED (see below).
+#
+# Boolean to control whether manpages are installed.
+#
+# NO_INSTALL_MANPAGES
+#				- If set, this port doesn't want to install any manpages.
+#				  Default: not set, i.e. manpages are installed by default.
+#
+# Set the following to specify all manpages that your port installs.
+# These manpages will be automatically listed in ${PLIST}.  Depending
+# on the setting of NO_MANCOMPRESS, the make rules will compress the
+# manpages for you.
+#
+# MAN<sect>		- A list of manpages, categorized by section.  For
+#				  example, if your port has "man/man1/foo.1" and
+#				  "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n".
+#				  The available sections chars are "123456789LN".
+# MAN<sect>_<lang>
+#				- If your port does not install all man pages for all
+#				  languages in MANLANG, language specific pages for
+#				  a language can be specified with this. For example,
+#				  if the port installs foo.1 in English, Japanese, and
+#				  German, bar.1 in English only, and baz.3 in German
+#				  only, set
+#					MANLANG=	"" de ja
+#					MAN1=		foo.1
+#					MAN1_EN=	bar.1
+#					MAN3_DE=	baz.3
+# MLINKS		- A list of <source, target> tuples for creating links
+#				  for manpages.  For example, "MLINKS= a.1 b.1 c.3 d.3"
+#				  will do an "ln -sf a.1 b.1" and "ln -sf c.3 d.3" in
+#				  appropriate directories.  (Use this even if the port
+#				  installs its own manpage links so they will show up
+#				  correctly in ${PLIST}.)
+# MANPREFIX		- The directory prefix for ${MAN<sect>} and ${MLINKS}.
+#				  Default: ${PREFIX}
+# MAN<sect>PREFIX
+#				- If manual pages of some sections install in different
+#				  locations than others, use these.
+#				  Default: ${MANPREFIX}
+# MANCOMPRESSED	- This variable can take values "yes", "no" or
+#				  "maybe".  "yes" means manpages are installed
+#				  compressed; "no" means they are not; "maybe" means
+#				  it changes depending on the value of NO_MANCOMPRESS.
+#				  Default: "yes" if USES=imake is set and NO_INSTALL_MANPAGES
+#				  is not set, and "no" otherwise.
+#
+# Set the following to specify all .info files your port installs.
+#
+# INFO			- A list of .info files (omitting the trailing ".info");
+#				  only one entry per document! These files are listed in
+#				  the path relative to ${INFO_PATH}.
+# INFO_PATH		- Path, where all .info files will be installed by your
+#				  port, relative to ${PREFIX}
+#				  Default: "share/info" if ${PREFIX} is equal to /usr
+#				  and "info" otherwise.
+#
+# Set the following to specify all documentation your port installs into
+# ${DOCSDIR}
+#
+# PORTDOCS		- A list of files and directories relative to DOCSDIR.
+#				  Shell glob patterns can be used, directories include
+#				  the entire subtree of contained files and directories.
+#				  Should not be set when no documentation files are
+#				  installed.
+#				  Useful for dynamically generated documentation.
+#
+# Set the following to specify all documentation your port installs into
+# ${EXAMPLESDIR}
+#
+# PORTEXAMPLES		- A list of files and directories relative to EXAMPLESDIR.
+#				  Shell glob patterns can be used, directories include
+#				  the entire subtree of contained files and directories.
+#				  Should not be set when no examples files are
+#				  installed.
+#				  Useful for dynamically generated examples.
+#
+# Set the following to specify all files and directories your port installs into
+# ${DATADIR}
+#
+# PORTDATA		- A list of files and directories relative to DATADIR.
+#				  Shell glob patterns can be used, directories include
+#				  the entire subtree of contained files and directories.
+#				  Should not be set when no data files are
+#				  installed.
+#				  Useful for dynamically generated data files.
+#
+# Default targets and their behaviors:
+#
+# fetch			- Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
+#				  port.
+# fetch-list	- Show list of commands to retrieve missing ${DISTFILES} and
+#				  ${PATCHFILES} for this port.
+# fetch-recursive
+#				- Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
+#				  port and dependencies.
+# fetch-recursive-list
+#				- Show list of commands to retrieve missing ${DISTFILES} and
+#				  ${PATCHFILES} for this port and dependencies.
+# fetch-required
+#				- Retrieves missing ${DISTFILES} and ${PATCHFILES} for this
+#				  port and dependencies.
+# fetch-required-list
+#				- Show list of commands to retrieve missing ${DISTFILES} and
+#				  ${PATCHFILES} for this port and dependencies.
+# fetch-url-list
+#				- Show list of URLS to retrieve missing ${DISTFILES} and
+#				  ${PATCHFILES} for this port.
+# fetch-urlall-list
+#				- Show list of URLS to retrieve ${DISTFILES} and
+#				  ${PATCHFILES} for this port.
+#
+# all-depends-list
+#				- Show all directories which are dependencies
+#				  for this port.
+# build-depends-list
+#				- Show all directories which are build-dependencies
+#				  for this port.
+# package-depends-list
+#				- Show all directories which are package-dependencies
+#				  for this port. This is based upon the dependency
+#				  tree as recorded in the Makefiles of the ports
+#				  collection, not as recorded in the currently
+#				  installed ports.
+# actual-package-depends
+#				- Like package-depends-list but with the difference
+#				  that the dependencies of the currently installed
+#				  ports are used instead of the dependencies as
+#				  recorded in the ports collection.
+# run-depends-list
+#				- Show all directories which are run-dependencies
+#				  for this port.
+#
+# extract		- Unpacks ${DISTFILES} into ${WRKDIR}.
+# patch			- Apply any provided patches to the source.
+# configure		- Runs either GNU configure, one or more local configure
+#				  scripts or nothing, depending on what's available.
+# build			- Actually compile the sources.
+# install		- Install the results of a build.
+# reinstall		- Install the results of a build, ignoring "already installed"
+#				  flag.
+# deinstall		- Remove the installation.
+# deinstall-all	- Remove all installations with the same PKGORIGIN.
+# package		- Create a package from an _installed_ port.
+# package-recursive
+#				- Create a package for a port and _all_ of its dependencies.
+# describe		- Try to generate a one-line description for each port for
+#				  use in INDEX files and the like.
+# checkpatch	- Do a "patch -C" instead of a "patch".  Note that it may
+#				  give incorrect results if multiple patches deal with
+#				  the same file.
+# checksum		- Use distinfo to ensure that your distfiles are valid.
+# checksum-recursive
+#				- Run checksum in this port and all dependencies.
+# makesum		- Generate distinfo (only do this for your own ports!).
+# clean			- Remove ${WRKDIR} and other temporary files used for building.
+# clean-depends	- Do a "make clean" for all dependencies.
+# config		- Configure options for this port (using ${DIALOG}).
+#				  Automatically run prior to extract, patch, configure, build,
+#				  install, and package.
+# config-recursive
+#				- Configure options for this port for a port and all its
+#				  dependencies.
+# showconfig	- Display options config for this port.
+# showconfig-recursive
+#				- Display options config for this port and all its
+#				  dependencies.
+# rmconfig		- Remove the options config for this port.
+# rmconfig-recursive
+#				- Remove the options config for this port and all its
+#				  dependencies.
+#
+# Default sequence for "all" is:
+#
+#		check-sanity fetch checksum extract patch configure build
+#
+# Please read the comments in the targets section below; you
+# should be able to use the pre-* or post-* targets/scripts
+# (which are available for every stage except checksum) or
+# override the do-* targets to do pretty much anything you want.
+#
+# NEVER override the "regular" targets unless you want to open
+# a major can of worms.
+#
+# Set these variables if your port doesn't need some of the steps.
+# Note that there are no NO_PATCH or NO_CONFIGURE variables because
+# those steps are empty by default.  NO_EXTRACT is not allowed anymore
+# since we need to at least create ${WRKDIR}.  Also, NO_CHECKSUM is a user
+# variable and is not to be set in a port's Makefile.  See above for NO_PACKAGE.
+#
+# NO_BUILD		- Use a dummy (do-nothing) build target.
+# NO_INSTALL	- Use a dummy (do-nothing) install target.
+#
+# Here are some variables used in various stages.
+#
+# For options see bsd.options.mk
+#
+# For fetch:
+#
+# FETCH_BINARY	- Path to ftp/http fetch command if not in $PATH.
+#				  Default: "/usr/bin/fetch"
+# FETCH_ARGS	- Arguments to ftp/http fetch command.
+#				  Default: "-Fpr"
+# FETCH_CMD		- ftp/http fetch command.
+#				  Default: ${FETCH_BINARY} ${FETCH_ARGS}
+# FETCH_BEFORE_ARGS
+#				- Arguments to ${FETCH_CMD} before filename.
+#				  Default: none
+# FETCH_AFTER_ARGS
+#				- Arguments to ${FETCH_CMD} following filename.
+#				  Default: none
+# FETCH_ENV		- Environment to pass to ${FETCH_CMD}.
+#				  Default: none
+# FETCH_REGET	- Times to retry fetching of files on checksum errors.
+#				  Default: 1
+# CLEAN_FETCH_ENV
+#				- Disable package dependency in fetch target for mass
+#				  fetching.  User settable.
+#
+# For extract:
+#
+# EXTRACT_CMD	- Command for extracting archive: "bzip2" if USE_BZIP2
+#				  is set, "unzip" if USE_ZIP is set, "gzip" otherwise.
+# EXTRACT_BEFORE_ARGS
+#				- Arguments to ${EXTRACT_CMD} before filename.
+#				  Default: "-dc"
+# EXTRACT_AFTER_ARGS
+#				- Arguments to ${EXTRACT_CMD} following filename.
+#				  default: "| tar -xf -"
+# EXTRACT_PRESERVE_OWNERSHIP
+#				- Normally, when run as "root", the extract stage will
+#				  change the owner and group of all files under ${WRKDIR}
+#				  to 0:0.  Set this variable if you want to turn off this
+#				  feature.
+# For patch:
+#
+# EXTRA_PATCHES	- Define this variable if you have patches not in
+#				  ${PATCHDIR}.  This usually happens when you need to
+#				  do some pre-processing before some distribution
+#				  patches can be applied.  In that case, fetch them as
+#				  extra distfiles, put the processed results in
+#				  ${WRKDIR}, then point EXTRA_PATCHES to them.
+#				  The patches specified by this variable will be
+#				  applied after the normal distribution patches but
+#				  before those in ${PATCHDIR}.
+# PATCH_WRKSRC	- Directory to apply patches in.
+#				  Default: ${WRKSRC}
+#
+# For configure:
+#
+# HAS_CONFIGURE	- If set, this port has its own configure script.  The
+#				  configure stage will not do anything if this is not set.
+# GNU_CONFIGURE	- If set, you are using GNU configure (optional).  Implies
+#				  HAS_CONFIGURE.
+# CONFIGURE_WRKSRC
+#				- Directory to run configure in.
+#				  Default: ${WRKSRC}
+# CONFIGURE_SCRIPT
+#				- Name of configure script, relative to ${CONFIGURE_WRKSRC}.
+#				  Default: "Makefile.PL" if USES=perl5 and USE_PERL5=configure
+#				  are set, "configure" otherwise.
+# CONFIGURE_TARGET
+#				- The name of target to call when GNU_CONFIGURE is
+#				  defined.
+#				  Default: ${ARCH}-portbld-freebsd${OSREL}
+# GNU_CONFIGURE_PREFIX
+#				- The directory passed as prefix to the configure script if
+#				  GNU_CONFIGURE is set.
+#				  Default: ${PREFIX}
+# CONFIGURE_ARGS
+#				- Pass these args to configure if ${HAS_CONFIGURE} is set.
+#				  Default: "--prefix=${GNU_CONFIGURE_PREFIX} --infodir=${PREFIX}/${INFO_PATH}
+#				  --mandir=${MANPREFIX}/man --build=${CONFIGURE_TARGET}" if
+#				  GNU_CONFIGURE is set, "CC=${CC} CFLAGS=${CFLAGS}
+#				  PREFIX=${PREFIX} INSTALLPRIVLIB=${PREFIX}/lib
+#				  INSTALLARCHLIB=${PREFIX}/lib" if USES=perl5 and
+#				  USE_PERL5=configure are set, empty otherwise.
+# CONFIGURE_ENV	- Pass these env (shell-like) to configure if
+#				  ${HAS_CONFIGURE} is set.
+# CONFIGURE_LOG	- The name of configure log file. It will be printed to
+#				  the screen if configure fails.
+#				  Default: config.log
+# CONFIGURE_FAIL_MESSAGE
+#				- A message displayed to users when configure
+#				  fails (note: this assumes the do-configure
+#				  target has not been overwritten).  This message
+#				  will be passed through /usr/bin/fmt before
+#				  being shown to the user.
+#
+# WITHOUT_FBSD10_FIX		  Disable FreeBSD 10.0 autotools workaround.
+#
+# For build and install:
+#
+# MAKEFILE		- Name of the makefile.
+#				  Default: Makefile
+# ALL_TARGET	- Default target for sub-make in build stage.
+#				  Default: all
+# BUILD_WRKSRC	- Directory to do build in (default: ${WRKSRC}).
+# MAKE_ENV		- Additional environment vars passed to sub-make in build
+#				  and install stages.
+#				  Default: see below
+# MAKE_ARGS		- Any extra arguments to sub-make in build and install stages.
+#				  Default: none
+##
+# MAKE_JOBS_UNSAFE
+#				- Disallow multiple jobs even when user set a global override.
+#				  To be used with known bad ports.
+# DISABLE_MAKE_JOBS
+#				- Set to disable the multiple jobs feature.  User settable.
+# MAKE_JOBS_NUMBER
+#				- Override the number of make jobs to be used.  User settable.
+# MAKE_JOBS_NUMBER_LIMIT
+#				- Set a limit for maximum number of make jobs allowed to be
+#				  used.
+## cacche
+#
+# WITH_CCACHE_BUILD
+# 				- Enable CCACHE support (devel/ccache).  User settable.
+# CCACHE_DIR
+# 				- Which directory to use for ccache (default: $HOME/.ccache)
+# NO_CCACHE
+#				- Disable CCACHE support for example for certain ports if
+#				  CCACHE is enabled.  User settable.
+#
+# For install:
+#
+# INSTALL_TARGET
+#				- Default target for sub-make in install stage.
+#				  Default: install
+# INSTALL_WRKSRC
+#				- Directory to install from
+#				  Default: ${WRKSRC}
+# NO_MTREE		- If set, will not invoke mtree from bsd.port.mk from
+#				  the "install" target.
+# MTREE_FILE	- The name of the mtree file.
+#				  Default: ${PORTSDIR}/Templates/BSD.local.dist or
+#				  /etc/mtree/BSD.usr.dist if ${PREFIX} == "/usr".
+# PLIST_DIRS	- Directories to be added to packing list
+# PLIST_DIRSTRY	- Directories to be added to packing list and try to remove them.
+# PLIST_FILES	- Files and symbolic links to be added to packing list
+#
+# PLIST			- Name of the `packing list' file.
+#				  Change this to ${WRKDIR}/PLIST or something if you
+#				  need to write to it.  (It is not a good idea for a port
+#				  to write to any file outside ${WRKDIR} during a normal
+#				  build.)
+#				  Default: ${PKGDIR}/pkg-plist
+# TMPPLIST		- Name of the `packing list' file after processing
+#				  Default: ${WRKDIR}/.PLIST.mktmp
+# PLIST_SUB		- List of "variable=value" pair for substitution in ${PLIST}
+#				  Default: see below
+#
+# SUB_FILES		- Files that should be passed through sed and redirected to
+#				  ${WRKDIR}.
+#				- For each file specified in SUB_FILES, there must be a
+#				  corresponding file in ${FILESDIR} whose suffix is ".in". For
+#				  instance, if the Makefile specifies "SUB_FILES= pkg-message"
+#				  then there must be a file called pkg-message.in in
+#				  ${FILESDIR}.
+#				- The substitution process is the same as PLIST_FILES, as
+#				  described below except that any line beginning with @comment
+#				  is deleted.
+# SUB_LIST		- List of "variable=value" pair for substitution in ${SUB_FILES}
+#				  Some pairs are added by default: eg. PREFIX=${PREFIX}
+#
+# USE_LDCONFIG  - If set to "yes", this adds ${PREFIX}/lib to the list of
+#				  directories to be searched for shared libraries.
+#				  Otherwise, this is a list of directories to be added to that
+#				  list. The directory names are written to
+#				  ${PREFIX}/libdata/ldconfig/${UNIQUENAME} which is then
+#				  used by the ldconfig startup script.
+#				  This mechanism replaces ldconfig scripts installed by some
+#				  ports, often under such names as 000.${UNQUENAME}.sh.
+#				  If USE_LINUX_PREFIX is defined, the Linux version of
+#				  ldconfig will be used instead of the native FreeBSD
+#				  version, and the directory list given will be ignored.
+# USE_LDCONFIG32
+# 				- Same as USE_LDCONFIG but the target file is
+# 				  ${PREFIX}/libdata/ldconfig32/${UNIQUENAME} instead.
+# 				  Note: that should only be used on 64-bit architectures.
+# NO_LDCONFIG_MTREE
+#				- Denotes whether the libdata/ldconfig directory is part of
+#				  the mtree on a given OSVERSION system.  If it is not, we
+#				  create the directory, pull in the ldconfig_compat port,
+#				  and clean up on de-installation.  NOTE: this variable is
+#				  internal to bsd.port.mk and must not be set in your Makefile.
+#
+# DOCSDIR		- Name of the directory to install the packages docs in.
+#				  Default: ${PREFIX}/share/doc/${PORTNAME}
+# DOCSDIR_REL	- The DOCSDIR relative to ${PREFIX}
+# EXAMPLESDIR	- Name of the directory to install the packages examples in.
+#				  Default: ${PREFIX}/share/examples/${PORTNAME}
+# EXAMPLESDIR_REL
+#				- The EXAMPLESDIR relative to ${PREFIX}
+# DATADIR		- Name of the directory to install the packages shared data in.
+#				  Default: ${PREFIX}/share/${PORTNAME}
+# DATADIR_REL	- The DATADIR relative to ${PREFIX}
+#
+# WWWDIR		- Name of the directory to install the packages www data in.
+#				  Default: ${PREFIX}/www/${PORTNAME}
+# WWWDIR_REL	- The WWWDIR relative to ${PREFIX}
+#
+# USERS			- List of users to create at install time. Each login must
+# 				  have a corresponding entry in ${UID_FILES}.
+# GROUPS		- List of groups to create at install time. Each group must
+# 				  have a corresponding entry in ${GID_FILES}.
+#
+# DESKTOPDIR	- Name of the directory to install ${DESKTOP_ENTRIES} in.
+#				  Default: ${PREFIX}/share/applications
+# DESKTOP_ENTRIES
+#				- List of desktop entry files to generate and install in
+#				  ${DESKTOPDIR}. The format is
+#				  "Name" "Comment" "Icon" "Exec" "Categories" StartupNotify
+#				  Rules:
+#					* Only add desktop entries for applications which do not
+#					  require a terminal (ie. X applications).
+#					* If the upstream distribution already installs .desktop
+#					  files, you do not need to use this.
+#					* If you require a more elaborate .desktop file than this
+#					  variable permits, write it yourself and install it
+#					  in ${DESKTOPDIR}.
+#				  Notes:
+#					* Comment, Icon and StartupNotify may be empty
+#					  strings (""). Categories may be an empty string in some
+#					  cases (see below). The other fields are mandatory.
+#					* If Comment is an empty string, port ${COMMENT} will be
+#					  used.
+#					* If set, Icon must be either absolute path (usually
+#					  ${PREFIX}/share/pixmaps/${PORTNAME}.png) or icon name
+#					  without extension if installed icons follow Icon Theme
+#					  Specification.
+#					* If Categories is an empty string, bsd.port.mk will try
+#					  to deduce a default value using the CATEGORIES variable.
+#					  If the deduction fails, you will have to set Categories
+#					  manually. You should check the generated value using
+#					  "make desktop-categories", and override it if necessary.
+#					* Exec will also be used to name the .desktop file.
+#					* StartupNotify may be true, false or empty (see Desktop
+#					  Entry Specification for details).
+#					* The files will be automatically added to ${PLIST}.
+#				  Example:
+#					"X Window Information" \
+#					"Get information about X windows" \
+#					"${PREFIX}/share/pixmaps/wininfo.png" \
+#					"${PREFIX}/bin/wininfo" \
+#					"System;" \
+#					""
+#				  See http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html
+#				  for an explanation of the fields. If you need to create more
+#				  than one file, just chain them into a single variable.
+#
+# Note that the install target will automatically add manpages (see
+# above) and also substitute special sequences of characters (delimited
+# by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}.  For
+# instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of
+# "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL.
+# ${TMPPLIST} is generated before the do-install stage.  If you are
+# generating the packing list on-the-fly, make sure it's generated before
+# do-install is called!
+#
+# For package:
+#
+# NO_LATEST_LINK
+#				- Do not install the "Latest" link for package.  Define this
+#				  if this port is a beta version of another stable port
+#				  which is also in the tree.
+# LATEST_LINK	- Install the "Latest" link for the package as ___.  Define
+#				  this if the "Latest" link name will be incorrectly determined.
+#
+# This is used in all stages:
+#
+# SCRIPTS_ENV	- Additional environment vars passed to scripts in
+#				  ${SCRIPTDIR} executed by bsd.port.mk.
+#				  Default: see below
+#
+# Finally, variables to change if you want a special behavior.  These
+# are for debugging purposes.  Don't set them in your Makefile.
+#
+# ECHO_MSG		- Used to print all the '===>' style prompts - override this
+#				  to turn them off.
+#				  Default: ${ECHO_CMD}
+# PATCH_DEBUG	- If set, print out more information about the patches as
+#				  it attempts to apply them.
+# PKG_DBDIR		- Where package installation is recorded; this directory
+#				  must not contain anything else.
+#				  Default: /var/db/pkg
+# PORT_DBDIR	- Where port configuration options are recorded.
+#				  Default: /var/db/ports
+# NO_PKG_REGISTER
+#				- Don't register a port installation as a package.
+# FORCE_PKG_REGISTER
+#				- If set, it will overwrite any existing package
+#				  registration information in ${PKG_DBDIR}/${PKGNAME}.
+# NO_DEPENDS	- Don't verify build of dependencies.
+# CHECKSUM_ALGORITHMS
+#				- Different checksum algorithms to check for verifying the
+#				  integrity of the distfiles. The absence of the algorithm
+#				  in distinfo doesn't make it fail.
+#				  Default: sha256
+# NO_CHECKSUM	- Don't verify the checksum.  Typically used when
+#				  when you noticed the distfile you just fetched has
+#				  a different checksum and you intend to verify if
+#				  the port still works with it.
+# USE_PACKAGE_DEPENDS
+#				- Try to install dependencies from existing packages instead
+#				  of building the port from scratch. Fallback on source
+#				  if an existing package is not present.
+# USE_PACKAGE_DEPENDS_ONLY
+#				- Like USE_PACKAGE_DEPENDS, but do not fallback on source.
+# INSTALL_AS_USER
+#				- Define this to install as the current user, intended
+#				  for systems where you have no root access.
+# DISABLE_SIZE	- Do not check the size of a distfile even if the SIZE field
+#				  has been specified in distinfo.  This is useful
+#				  when using an alternate FETCH_CMD.
+#
+# End of the list of all variables that need to be defined in a port.
+# Most port authors should not need to understand anything after this point.
+#
+
+# These need to be absolute since we don't know how deep in the ports
+# tree we are and thus can't go relative.  They can, of course, be overridden
+# by individual Makefiles or local system make configuration.
+PORTSDIR?=		/usr/ports
+LOCALBASE?=		/usr/local
+LINUXBASE?=		/compat/linux
+DISTDIR?=		${PORTSDIR}/distfiles
+_DISTDIR?=		${DISTDIR}/${DIST_SUBDIR}
+INDEXDIR?=		${PORTSDIR}
+SRC_BASE?=		/usr/src
+USESDIR?=		${PORTSDIR}/Mk/Uses
+SCRIPTSDIR?=	${PORTSDIR}/Mk/Scripts
+LIB_DIRS?=		/lib /usr/lib ${LOCALBASE}/lib
+NOTPHONY?=
+
+.if defined(FORCE_STAGE)
+.undef NO_STAGE
+.endif
+
+# make sure bmake treats -V as expected
+.MAKE.EXPAND_VARIABLES= yes
+# tell bmake we use the old :L :U modifiers
+.MAKE.FreeBSD_UL= yes
+
+.include "${PORTSDIR}/Mk/bsd.commands.mk"
+
+#
+# DESTDIR section to start a chrooted process if invoked with DESTDIR set
+#
+
+.if defined(DESTDIR) && !empty(DESTDIR) && !defined(CHROOTED) && \
+	!defined(BEFOREPORTMK) && !defined(INOPTIONSMK)
+
+.include "${PORTSDIR}/Mk/bsd.destdir.mk"
+
+.else
+
+# Look for ${PATCH_WRKSRC}/.../*.orig files, and (re-)create
+# ${FILEDIR}/patch-* files from them.
+
+.if !target(makepatch)
+makepatch:
+	@${MKDIR} ${FILESDIR}
+	@(cd ${PATCH_WRKSRC}; \
+		for i in `find . -type f -name '*.orig'`; do \
+			ORG=$$i; \
+			NEW=$${i%.orig}; \
+			OUT=${FILESDIR}`${ECHO} $${NEW} | \
+				${SED} -e 's|/|__|g' \
+					-e 's|^\.__|/patch-|'`; \
+			${ECHO} ${DIFF} -ud $${ORG} $${NEW} '>' $${OUT}; \
+			${DIFF} -ud $${ORG} $${NEW} > $${OUT} || ${TRUE}; \
+		done \
+	)
+.endif
+
+
+# Start of options section
+.if defined(INOPTIONSMK) || ( !defined(USEOPTIONSMK) && !defined(AFTERPORTMK) )
+
+
+# Get the default maintainer
+MAINTAINER?=	ports@FreeBSD.org
+
+# Get the architecture
+.if !defined(ARCH)
+ARCH!=	${UNAME} -p
+.endif
+
+# Get the operating system type
+.if !defined(OPSYS)
+OPSYS!=	${UNAME} -s
+.endif
+
+# Get the operating system revision
+.if !defined(OSREL)
+OSREL!=	${UNAME} -r | ${SED} -e 's/[-(].*//'
+.endif
+
+# Get __FreeBSD_version
+.if !defined(OSVERSION)
+.if exists(/usr/include/sys/param.h)
+OSVERSION!=	${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h
+.elif exists(${SRC_BASE}/sys/sys/param.h)
+OSVERSION!=	${AWK} '/^\#define[[:blank:]]__FreeBSD_version/ {print $$3}' < ${SRC_BASE}/sys/sys/param.h
+.else
+OSVERSION!=	${SYSCTL} -n kern.osreldate
+.endif
+.endif
+
+.if ${OSVERSION} >= 1000017
+.if !defined(WITHOUT_PKGNG)
+WITH_PKGNG?=	yes
+.else
+.undef	WITH_PKGNG
+.endif
+.endif
+
+.if !defined(WITH_PKGNG) && !defined(NO_WARNING_PKG_INSTALL_EOL)
+WARNING+=	"pkg_install EOL is scheduled for 2014-09-01. Please consider migrating to pkgng"
+WARNING+=	"http://blogs.freebsdish.org/portmgr/2014/02/03/time-to-bid-farewell-to-the-old-pkg_-tools/"
+WARNING+=	"If you do not want to see this message again set NO_WARNING_PKG_INSTALL_EOL=yes in your make.conf"
+.endif
+
+# Enable new xorg for FreeBSD versions after Radeon KMS was imported unless
+# WITHOUT_NEW_XORG is set.
+.if ${OSVERSION} >= 1100000
+. if !defined(WITHOUT_NEW_XORG)
+WITH_NEW_XORG?=	yes
+. else
+.undef WITH_NEW_XORG
+. endif
+.endif
+
+# Only define tools here (for transition period with between pkg tools)
+.include "${PORTSDIR}/Mk/bsd.commands.mk"
+
+MASTERDIR?=	${.CURDIR}
+
+.if ${MASTERDIR} != ${.CURDIR}
+SLAVE_PORT?=	yes
+MASTER_PORT?=${MASTERDIR:C/[^\/]+\/\.\.\///:C/[^\/]+\/\.\.\///:C/^.*\/([^\/]+\/[^\/]+)$/\\1/}
+.else
+SLAVE_PORT?=	no
+MASTER_PORT?=
+.endif
+
+# If they exist, include Makefile.inc, then architecture/operating
+# system specific Makefiles, then local Makefile.local.
+
+.if ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/../Makefile.inc)
+.include "${.CURDIR}/../Makefile.inc"
+USE_SUBMAKE=	yes
+.endif
+
+.if exists(${MASTERDIR}/../Makefile.inc)
+.include "${MASTERDIR}/../Makefile.inc"
+USE_SUBMAKE=	yes
+.endif
+
+.if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS})
+.include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}"
+USE_SUBMAKE=	yes
+.elif exists(${MASTERDIR}/Makefile.${OPSYS})
+.include "${MASTERDIR}/Makefile.${OPSYS}"
+USE_SUBMAKE=	yes
+.elif exists(${MASTERDIR}/Makefile.${ARCH})
+.include "${MASTERDIR}/Makefile.${ARCH}"
+USE_SUBMAKE=	yes
+.endif
+
+.if exists(${MASTERDIR}/Makefile.local)
+.include "${MASTERDIR}/Makefile.local"
+USE_SUBMAKE=	yes
+.endif
+
+.for _CATEGORY in ${CATEGORIES}
+PKGCATEGORY?=	${_CATEGORY}
+.endfor
+_PORTDIRNAME=	${.CURDIR:T}
+PORTDIRNAME?=	${_PORTDIRNAME}
+PKGORIGIN?=		${PKGCATEGORY}/${PORTDIRNAME}
+
+# where 'make config' records user configuration options
+PORT_DBDIR?=	/var/db/ports
+
+UID_FILES?=	${PORTSDIR}/UIDs
+GID_FILES?=	${PORTSDIR}/GIDs
+UID_OFFSET?=	0
+GID_OFFSET?=	0
+
+# predefined accounts from src/etc/master.passwd
+# alpha numeric sort order
+USERS_BLACKLIST=	_dhcp _pflogd auditdistd bin bind daemon games hast kmem mailnull man news nobody operator pop proxy root smmsp sshd toor tty uucp www
+
+LDCONFIG_DIR=	libdata/ldconfig
+LDCONFIG32_DIR=	libdata/ldconfig32
+
+.if defined(LATEST_LINK)
+UNIQUENAME?=	${LATEST_LINK}
+.else
+UNIQUENAME?=	${PKGNAMEPREFIX}${PORTNAME}
+.endif
+
+.endif
+
+# At least KDE needs TMPDIR for the package building,
+# so we're setting it to the known default value.
+.if defined(PACKAGE_BUILDING)
+TMPDIR?=	/tmp
+.endif # defined(PACKAGE_BUILDING)
+
+# Respect TMPDIR passed via make.conf or similar and pass it down
+# to configure and make.
+.if defined(TMPDIR)
+MAKE_ENV+=	TMPDIR="${TMPDIR}"
+CONFIGURE_ENV+=	TMPDIR="${TMPDIR}"
+.endif # defined(TMPDIR)
+
+.if defined(WITH_DEBUG_PORTS)
+.if ${WITH_DEBUG_PORTS:M${PKGORIGIN}}
+WITH_DEBUG=	yes
+.endif
+.endif
+
+# Reset value from bsd.own.mk.
+.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG)
+STRIP=	#none
+MAKE_ENV+=	DONTSTRIP=yes
+.endif
+
+.include "${PORTSDIR}/Mk/bsd.options.mk"
+
+# Start of pre-makefile section.
+.if !defined(AFTERPORTMK) && !defined(INOPTIONSMK)
+
+.include "${PORTSDIR}/Mk/bsd.sanity.mk"
+
+_PREMKINCLUDED=	yes
+
+.if defined(PORTVERSION)
+.if ${PORTVERSION:M*[-_,]*}x != x
+IGNORE=			PORTVERSION ${PORTVERSION} may not contain '-' '_' or ','
+.endif
+DISTVERSION?=	${PORTVERSION:S/:/::/g}
+.elif defined(DISTVERSION)
+PORTVERSION=	${DISTVERSION:L:C/([a-z])[a-z]+/\1/g:C/([0-9])([a-z])/\1.\2/g:C/:(.)/\1/g:C/[^a-z0-9+]+/./g}
+.endif
+
+PORTREVISION?=	0
+.if ${PORTREVISION} != 0
+_SUF1=	_${PORTREVISION}
+.endif
+
+PORTEPOCH?=		0
+.if ${PORTEPOCH} != 0
+_SUF2=	,${PORTEPOCH}
+.endif
+
+PKGVERSION=	${PORTVERSION:C/[-_,]/./g}${_SUF1}${_SUF2}
+PKGNAME=	${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PKGVERSION}
+DISTNAME?=	${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION:C/:(.)/\1/g}${DISTVERSIONSUFFIX}
+
+INDEXFILE?=		INDEX-${OSVERSION:C/([0-9]*)[0-9]{5}/\1/}
+
+DOCSDIR?=		${PREFIX}/share/doc/${PORTNAME}
+EXAMPLESDIR?=		${PREFIX}/share/examples/${PORTNAME}
+DATADIR?=		${PREFIX}/share/${PORTNAME}
+WWWDIR?=		${PREFIX}/www/${PORTNAME}
+ETCDIR?=		${PREFIX}/etc/${PORTNAME}
+
+.if defined(USE_LINUX_RPM)
+.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk"
+.endif
+
+.if defined(USE_LINUX_APPS)
+.include "${PORTSDIR}/Mk/bsd.linux-apps.mk"
+.endif
+
+.if defined(USE_XORG) || defined(XORG_CAT)
+.include "${PORTSDIR}/Mk/bsd.xorg.mk"
+.endif
+
+PACKAGES?=		${PORTSDIR}/packages
+TEMPLATES?=		${PORTSDIR}/Templates
+
+PATCHDIR?=		${MASTERDIR}/files
+FILESDIR?=		${MASTERDIR}/files
+SCRIPTDIR?=		${MASTERDIR}/scripts
+PKGDIR?=		${MASTERDIR}
+
+.if defined(USE_LINUX_PREFIX)
+PREFIX?=		${LINUXBASE}
+NO_MTREE=		yes
+.else
+PREFIX?=		${LOCALBASE}
+.endif
+
+.if defined(USE_LINUX_PREFIX)
+LDCONFIG_CMD?=			${LINUXBASE}/sbin/ldconfig -r ${LINUXBASE}
+.endif
+
+PKGCOMPATDIR?=		${LOCALBASE}/lib/compat/pkg
+
+.if defined(USE_LOCAL_MK)
+.include "${PORTSDIR}/Mk/bsd.local.mk"
+.endif
+
+.if defined(USE_OPENSSL)
+.include "${PORTSDIR}/Mk/bsd.openssl.mk"
+.endif
+
+.if defined(USE_EMACS)
+.include "${PORTSDIR}/Mk/bsd.emacs.mk"
+.endif
+
+.if defined(USE_GNUSTEP)
+.include "${PORTSDIR}/Mk/bsd.gnustep.mk"
+.endif
+
+.if defined(USE_PHP)
+.include "${PORTSDIR}/Mk/bsd.php.mk"
+.endif
+
+.if defined(USE_PYTHON) || defined(USE_PYTHON_BUILD) || defined(USE_PYTHON_RUN)
+.include "${PORTSDIR}/Mk/bsd.python.mk"
+.endif
+
+.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART)
+.include "${PORTSDIR}/Mk/bsd.efl.mk"
+.endif
+
+.if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL)
+.include "${PORTSDIR}/Mk/bsd.fpc.mk"
+.endif
+
+.if defined(USE_JAVA)
+.include "${PORTSDIR}/Mk/bsd.java.mk"
+.endif
+
+.if defined(USE_RUBY) || defined(USE_LIBRUBY)
+.include "${PORTSDIR}/Mk/bsd.ruby.mk"
+.endif
+
+.if defined(USE_OCAML)
+.include "${PORTSDIR}/Mk/bsd.ocaml.mk"
+.endif
+
+.if defined(USE_APACHE) || defined(USE_APACHE_BUILD) || defined(USE_APACHE_RUN)
+.include "${PORTSDIR}/Mk/bsd.apache.mk"
+.endif
+
+.if defined(USE_QT4) || defined(USE_QT5)
+.include "${PORTSDIR}/Mk/bsd.qt.mk"
+.endif
+
+.if defined(USE_TEX)
+.include "${PORTSDIR}/Mk/bsd.tex.mk"
+.endif
+
+.if defined(USE_DRUPAL)
+.include "${PORTSDIR}/Mk/bsd.drupal.mk"
+.endif
+
+.if defined(WANT_GECKO) || defined(USE_GECKO) || defined(USE_FIREFOX) || defined(USE_FIREFOX_BUILD) || defined(USE_SEAMONKEY) || defined(USE_SEAMONKEY_BUILD) || defined(USE_THUNDERBIRD) || defined(USE_THUNDERBIRD_BUILD)
+.include "${PORTSDIR}/Mk/bsd.gecko.mk"
+.endif
+
+.if defined(WANT_GNOME) || defined(USE_GNOME) || defined(INSTALLS_ICONS)
+.include "${PORTSDIR}/Mk/bsd.gnome.mk"
+.endif
+
+.if defined(USE_MATE)
+.include "${PORTSDIR}/Mk/bsd.mate.mk"
+.endif
+
+.if defined(WANT_LUA) || defined(USE_LUA) || defined(USE_LUA_NOT)
+.include "${PORTSDIR}/Mk/bsd.lua.mk"
+.endif
+
+.if defined(WANT_WX) || defined(USE_WX) || defined(USE_WX_NOT)
+.include "${PORTSDIR}/Mk/bsd.wx.mk"
+.endif
+
+.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER1)
+.include "${PORTSDIR}/Mk/bsd.gstreamer.mk"
+.endif
+
+.if defined(USE_SDL) || defined(WANT_SDL)
+.include "${PORTSDIR}/Mk/bsd.sdl.mk"
+.endif
+
+.if defined(USE_XFCE)
+.include "${PORTSDIR}/Mk/bsd.xfce.mk"
+.endif
+
+.if defined(USE_KDE4) || defined(KDE4_BUILDENV)
+.include "${PORTSDIR}/Mk/bsd.kde4.mk"
+.endif
+
+.include "${PORTSDIR}/Mk/bsd.pbi.mk"
+
+.if defined(USE_GMAKE)
+USES+=	gmake
+.endif
+
+.if defined(USE_DOS2UNIX)
+.if ${USE_DOS2UNIX:U}=="YES"
+DOS2UNIX_REGEX?=	.*
+.else
+.if ${USE_DOS2UNIX:M*/*}
+DOS2UNIX_FILES+=	${USE_DOS2UNIX}
+.else
+DOS2UNIX_GLOB+=	${USE_DOS2UNIX}
+.endif
+.endif
+USES+=	dos2unix
+.endif
+
+.if !defined(UID)
+UID!=	${ID} -u
+.endif
+
+# Loading features
+.for f in ${USES}
+_f=${f:C/\:.*//g}
+.if ${_f} != ${f}
+${_f}_ARGS:=	${f:C/^[^\:]*\://g}
+.endif
+.include "${USESDIR}/${_f}.mk"
+.endfor
+
+.if defined(USE_BZIP2)
+EXTRACT_SUFX?=			.tar.bz2
+.elif defined(USE_LHA)
+EXTRACT_SUFX?=			.lzh
+.elif defined(USE_ZIP)
+EXTRACT_SUFX?=			.zip
+.elif defined(USE_XZ)
+EXTRACT_SUFX?=			.tar.xz
+.else
+EXTRACT_SUFX?=			.tar.gz
+.endif
+
+# You can force skipping these test by defining IGNORE_PATH_CHECKS
+.if !defined(IGNORE_PATH_CHECKS)
+.if ! ${PREFIX:M/*}
+.BEGIN:
+	@${ECHO_MSG} "PREFIX must be defined as an absolute path so that when 'make'"
+	@${ECHO_MSG} "is invoked in the work area PREFIX points to the right place."
+	@${FALSE}
+.endif
+.endif
+
+# Location of mounted CDROM(s) to search for files
+CD_MOUNTPTS?=	/cdrom ${CD_MOUNTPT}
+
+# Owner and group of the WWW user
+WWWOWN?=	www
+WWWGRP?=	www
+
+.endif
+# End of pre-makefile section.
+
+# Start of post-makefile section.
+.if !defined(BEFOREPORTMK) && !defined(INOPTIONSMK)
+
+.if defined(_POSTMKINCLUDED)
+DEV_ERROR+=	"${PKGNAME}: Makefile error: you cannot include bsd.port[.post].mk twice"
+	@${FALSE}
+.endif
+
+_POSTMKINCLUDED=	yes
+
+WRKDIR?=		${WRKDIRPREFIX}${.CURDIR}/work
+.if !defined(IGNORE_MASTER_SITE_GITHUB) && defined(USE_GITHUB)
+WRKSRC?=		${WRKDIR}/${GH_ACCOUNT}-${GH_PROJECT}-${GH_COMMIT}
+.endif
+.if defined(NO_WRKSUBDIR)
+WRKSRC?=		${WRKDIR}
+.else
+WRKSRC?=		${WRKDIR}/${DISTNAME}
+.endif
+.if defined(WRKSRC_SUBDIR)
+WRKSRC:=		${WRKSRC}/${WRKSRC_SUBDIR}
+.endif
+
+PATCH_WRKSRC?=	${WRKSRC}
+CONFIGURE_WRKSRC?=	${WRKSRC}
+BUILD_WRKSRC?=	${WRKSRC}
+INSTALL_WRKSRC?=${WRKSRC}
+
+PLIST_SUB+=	OSREL=${OSREL} PREFIX=%D LOCALBASE=${LOCALBASE}
+SUB_LIST+=	PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} \
+		DATADIR=${DATADIR} DOCSDIR=${DOCSDIR} EXAMPLESDIR=${EXAMPLESDIR} \
+		WWWDIR=${WWWDIR} ETCDIR=${ETCDIR}
+
+PLIST_REINPLACE+=	dirrmtry stopdaemon rmtry
+PLIST_REINPLACE_DIRRMTRY=s!^@dirrmtry \(.*\)!@unexec rmdir "%D/\1" 2>/dev/null || true!
+PLIST_REINPLACE_RMTRY=s!^@rmtry \(.*\)!@unexec rm -f %D/\1 2>/dev/null || true!
+PLIST_REINPLACE_STOPDAEMON=s!^@stopdaemon \(.*\)!@unexec %D/etc/rc.d/\1 forcestop 2>/dev/null || true!
+
+# kludge to strip trailing whitespace from CFLAGS;
+# sub-configure will not # survive double space
+CFLAGS:=	${CFLAGS:C/ $//}
+
+.if defined(WITHOUT_CPU_CFLAGS)
+.if defined(_CPUCFLAGS)
+.if !empty(_CPUCFLAGS)
+CFLAGS:=	${CFLAGS:C/${_CPUCFLAGS}//}
+.endif
+.endif
+.endif
+
+.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG)
+STRIP_CMD=	${TRUE}
+DEBUG_FLAGS?=	-g
+CFLAGS:=		${CFLAGS:N-O*:N-fno-strict*} ${DEBUG_FLAGS}
+.endif
+
+.if defined(WITH_SSP) || defined(WITH_SSP_PORTS)
+.include "${PORTSDIR}/Mk/bsd.ssp.mk"
+.endif
+
+.if defined(NOPORTDOCS)
+PLIST_SUB+=		PORTDOCS="@comment "
+.else
+PLIST_SUB+=		PORTDOCS=""
+.endif
+
+.if defined(NOPORTEXAMPLES)
+PLIST_SUB+=	        PORTEXAMPLES="@comment "
+.else
+PLIST_SUB+=	        PORTEXAMPLES=""
+.endif
+
+.if defined(NOPORTDATA)
+PLIST_SUB+=	        PORTDATA="@comment "
+.else
+PLIST_SUB+=	        PORTDATA=""
+.endif
+
+CONFIGURE_SHELL?=	${SH}
+MAKE_SHELL?=	${SH}
+
+CONFIGURE_ENV+=	SHELL=${SH} CONFIG_SHELL=${SH}
+MAKE_ENV+=		SHELL=${SH} NO_LINT=YES
+
+.if defined(MANCOMPRESSED)
+.if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \
+	${MANCOMPRESSED} != maybe
+check-makevars::
+	@${ECHO_MSG} "${PKGNAME}: Makefile error: value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\"".
+	@${FALSE}
+.endif
+.endif
+
+MANCOMPRESSED?=	no
+
+.if defined(PATCHFILES)
+.if ${PATCHFILES:M*.zip}x != x
+PATCH_DEPENDS+=		${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip
+.endif
+.endif
+
+# Check the compatibility layer for amd64/ia64
+
+.if ${ARCH} == "amd64" || ${ARCH} =="ia64"
+.if exists(/usr/lib32)
+HAVE_COMPAT_IA32_LIBS?=  YES
+.endif
+.if !defined(HAVE_COMPAT_IA32_KERN)
+HAVE_COMPAT_IA32_KERN!= if ${SYSCTL} -n compat.ia32.maxvmem >/dev/null 2>&1; then echo YES; fi; echo
+.if empty(HAVE_COMPAT_IA32_KERN)
+.undef HAVE_COMPAT_IA32_KERN
+.endif
+.endif
+.endif
+
+.if defined(IA32_BINARY_PORT) && ${ARCH} != "i386"
+.if ${ARCH} == "amd64" || ${ARCH} == "ia64"
+.if !defined(HAVE_COMPAT_IA32_KERN)
+IGNORE=		requires a kernel with compiled-in IA32 compatibility
+.elif !defined(HAVE_COMPAT_IA32_LIBS)
+IGNORE=		requires 32-bit libraries installed under /usr/lib32
+.endif
+_LDCONFIG_FLAGS=-32
+LIB32DIR=	lib32
+.else
+IGNORE=		requires i386 (or compatible) platform to run
+.endif
+.else
+LIB32DIR=	lib
+.endif
+PLIST_SUB+=	LIB32DIR=${LIB32DIR}
+
+PKGNG_ORIGIN?=	ports-mgmt/pkg
+.if defined(WITH_PKGNG)
+.if ${WITH_PKGNG} == devel
+PKGNG_ORIGIN=		ports-mgmt/pkg-devel
+.endif
+.if !defined(PKG_DEPENDS)
+.if !defined(CLEAN_FETCH_ENV)
+PKG_DEPENDS+=		${LOCALBASE}/sbin/pkg:${PORTSDIR}/${PKGNG_ORIGIN}
+.endif
+.endif
+.endif
+
+.if defined(USE_LHA)
+EXTRACT_DEPENDS+=	lha:${PORTSDIR}/archivers/lha
+.endif
+.if defined(USE_ZIP)
+EXTRACT_DEPENDS+=	${LOCALBASE}/bin/unzip:${PORTSDIR}/archivers/unzip
+.endif
+
+.if defined(USE_GCC)
+.include "${PORTSDIR}/Mk/bsd.gcc.mk"
+.endif
+
+.if defined(USE_BINUTILS) && !defined(DISABLE_BINUTILS)
+BUILD_DEPENDS+=	${LOCALBASE}/bin/as:${PORTSDIR}/devel/binutils
+BINUTILS?=	ADDR2LINE AR AS CPPFILT GPROF LD NM OBJCOPY OBJDUMP RANLIB \
+	READELF SIZE STRINGS
+BINUTILS_NO_MAKE_ENV?=
+. for b in ${BINUTILS}
+${b}=	${LOCALBASE}/bin/${b:C/PP/++/:L}
+.  if defined(GNU_CONFIGURE) || defined(BINUTILS_CONFIGURE)
+CONFIGURE_ENV+=	${b}="${${b}}"
+.  endif
+.  if ${BINUTILS_NO_MAKE_ENV:M${b}} == ""
+MAKE_ENV+=	${b}="${${b}}"
+.  endif
+. endfor
+.endif
+
+.if defined(USE_OPENLDAP) || defined(WANT_OPENLDAP_VER)
+.include "${PORTSDIR}/Mk/bsd.ldap.mk"
+.endif
+
+.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
+SUB_FILES+=	${USE_RC_SUBR}
+.endif
+
+.if defined(USE_RCORDER)
+SUB_FILES+=	${USE_RCORDER}
+.endif
+
+.if defined(USE_LDCONFIG) && ${USE_LDCONFIG:L} == "yes"
+USE_LDCONFIG=	${PREFIX}/lib
+.endif
+.if defined(USE_LDCONFIG32) && ${USE_LDCONFIG32:L} == "yes"
+IGNORE=			has USE_LDCONFIG32 set to yes, which is not correct
+.endif
+
+.if defined(USE_LINUX_PREFIX) && defined(USE_LDCONFIG)
+# we need ${LINUXBASE}/sbin/ldconfig
+USE_LINUX?=	yes
+.endif
+
+.if defined(USE_LINUX)
+
+.  if !defined(LINUX_OSRELEASE)
+LINUX_OSRELEASE!=	${ECHO_CMD} `${SYSCTL} -n compat.linux.osrelease 2>/dev/null`
+.  endif
+
+# install(1) also does a brandelf on strip, so don't strip with FreeBSD tools.
+STRIP=
+.	if exists(${LINUXBASE}/usr/bin/strip)
+STRIP_CMD=	${LINUXBASE}/usr/bin/strip
+.	else
+STRIP_CMD=	${TRUE}
+.	endif
+
+# Allow the user to specify another linux_base version.
+.	if defined(OVERRIDE_LINUX_BASE_PORT)
+.		if ${USE_LINUX:L} == yes
+USE_LINUX=	${OVERRIDE_LINUX_BASE_PORT}
+.		endif
+.	endif
+
+# NOTE: when you update the default linux_base version (case "yes"),
+# don't forget to update the Handbook!
+
+.	if exists(${PORTSDIR}/emulators/linux_base-${USE_LINUX})
+LINUX_BASE_PORT=	${LINUXBASE}/bin/sh:${PORTSDIR}/emulators/linux_base-${USE_LINUX}
+.	else
+.		if ${USE_LINUX:L} == "yes"
+LINUX_BASE_PORT=	${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-f10
+.		else
+IGNORE=		cannot be built: there is no emulators/linux_base-${USE_LINUX}, perhaps wrong use of USE_LINUX or OVERRIDE_LINUX_BASE_PORT
+.		endif
+.	endif
+
+RUN_DEPENDS+=	${LINUX_BASE_PORT}
+.endif
+
+.if defined(USE_DISPLAY)
+USES+=	display
+.endif
+
+PKG_IGNORE_DEPENDS?=		'this_port_does_not_exist'
+
+_GL_glesv2_LIB_DEPENDS=		libGLESv2.so:${PORTSDIR}/graphics/libglesv2
+_GL_egl_LIB_DEPENDS=		libEGL.so:${PORTSDIR}/graphics/libEGL
+_GL_gl_LIB_DEPENDS=		libGL.so:${PORTSDIR}/graphics/libGL
+_GL_gl_USE_XORG=		glproto dri2proto
+_GL_glew_LIB_DEPENDS=		libGLEW.so:${PORTSDIR}/graphics/glew
+_GL_glu_LIB_DEPENDS=		libGLU.so:${PORTSDIR}/graphics/libGLU
+_GL_glu_USE_XORG=		glproto dri2proto
+_GL_glw_LIB_DEPENDS=		libGLw.so:${PORTSDIR}/graphics/libGLw
+_GL_glut_LIB_DEPENDS=		libglut.so:${PORTSDIR}/graphics/freeglut
+
+.if defined(USE_GL)
+. if ${USE_GL:L} == "yes"
+USE_GL=		glu
+. endif
+. for _component in ${USE_GL}
+.  if !defined(_GL_${_component}_LIB_DEPENDS) && \
+		!defined(_GL_${_component}_RUN_DEPENDS)
+IGNORE=		uses unknown GL component
+.  else
+USE_XORG+=	${_GL_${_component}_USE_XORG}
+BUILD_DEPENDS+=	${_GL_${_component}_BUILD_DEPENDS}
+LIB_DEPENDS+=	${_GL_${_component}_LIB_DEPENDS}
+RUN_DEPENDS+=	${_GL_${_component}_RUN_DEPENDS}
+.  endif
+. endfor
+.endif
+
+.if !defined(NO_STAGE)
+.include "${PORTSDIR}/Mk/bsd.stage.mk"
+.else
+# Ignore STAGEDIR if set from make.conf
+.undef STAGEDIR
+# From command line it is impossible to undefined so we must raise an error
+.if defined(STAGEDIR)
+IGNORE=	Do not define STAGEDIR in command line
+.endif
+.endif
+
+.if defined(WITH_PKGNG)
+.include "${PORTSDIR}/Mk/bsd.pkgng.mk"
+.endif
+
+.if defined(USE_LOCAL_MK)
+.include "${PORTSDIR}/Mk/bsd.local.mk"
+.endif
+
+.if defined(USE_XORG) || defined(XORG_CAT)
+.include "${PORTSDIR}/Mk/bsd.xorg.mk"
+.endif
+
+.if defined(USE_MYSQL) || defined(WANT_MYSQL_VER) || \
+	defined(USE_PGSQL) || defined(WANT_PGSQL_VER) || \
+	defined(USE_BDB) || defined(USE_SQLITE) || defined(USE_FIREBIRD)
+.include "${PORTSDIR}/Mk/bsd.database.mk"
+.endif
+
+.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER1)
+.include "${PORTSDIR}/Mk/bsd.gstreamer.mk"
+.endif
+
+.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART)
+.include "${PORTSDIR}/Mk/bsd.efl.mk"
+.endif
+
+.if defined(USE_JAVA)
+.include "${PORTSDIR}/Mk/bsd.java.mk"
+.endif
+
+.if defined(USE_LINUX_RPM)
+.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk"
+.endif
+
+.if defined(USE_LINUX_APPS)
+.include "${PORTSDIR}/Mk/bsd.linux-apps.mk"
+.endif
+
+.if defined(USE_QT4) || defined(USE_QT5)
+.include "${PORTSDIR}/Mk/bsd.qt.mk"
+.endif
+
+.if defined(USE_SCONS)
+.include "${PORTSDIR}/Mk/bsd.scons.mk"
+.endif
+
+.if defined(USE_SDL) || defined(WANT_SDL)
+.include "${PORTSDIR}/Mk/bsd.sdl.mk"
+.endif
+
+.if defined(USE_PHP)
+.include "${PORTSDIR}/Mk/bsd.php.mk"
+.endif
+
+.if defined(USE_PYTHON)
+.include "${PORTSDIR}/Mk/bsd.python.mk"
+.endif
+
+.if defined(USE_LUA) || defined(USE_LUA_NOT)
+.include "${PORTSDIR}/Mk/bsd.lua.mk"
+.endif
+
+.if defined(USE_WX) || defined(USE_WX_NOT)
+.include "${PORTSDIR}/Mk/bsd.wx.mk"
+.endif
+
+.if defined(USE_APACHE) || defined(USE_APACHE_BUILD) || defined(USE_APACHE_RUN)
+.include "${PORTSDIR}/Mk/bsd.apache.mk"
+.endif
+
+.if defined(USE_AUTOTOOLS)
+.include "${PORTSDIR}/Mk/bsd.autotools.mk"
+.endif
+
+.if defined(USE_FPC) || defined(WANT_FPC_BASE) || defined(WANT_FPC_ALL)
+.include "${PORTSDIR}/Mk/bsd.fpc.mk"
+.endif
+
+.if defined(WANT_GECKO) || defined(USE_GECKO)
+.include "${PORTSDIR}/Mk/bsd.gecko.mk"
+.endif
+
+.if defined(WANT_GNOME) || defined(USE_GNOME)
+.include "${PORTSDIR}/Mk/bsd.gnome.mk"
+.endif
+
+.if defined(USE_MATE)
+.include "${PORTSDIR}/Mk/bsd.mate.mk"
+.endif
+
+.if defined(USE_XFCE)
+.include "${PORTSDIR}/Mk/bsd.xfce.mk"
+.endif
+
+.if defined(USE_KDE4)
+.include "${PORTSDIR}/Mk/bsd.kde4.mk"
+.endif
+
+.if exists(${PORTSDIR}/Makefile.inc)
+.include "${PORTSDIR}/Makefile.inc"
+USE_SUBMAKE=	yes
+.endif
+
+# Loading features
+.for f in ${_USES_POST}
+_f=${f:C/\:.*//g}
+.if ${_f} != ${f}
+${_f}_ARGS:=	${f:C/^[^\:]*\://g}
+.endif
+.include "${USESDIR}/${_f}.mk"
+.endfor
+
+.if defined(USE_XORG)
+# Add explicit X options to avoid problems with false positives in configure
+.if defined(GNU_CONFIGURE)
+CONFIGURE_ARGS+=--x-libraries=${LOCALBASE}/lib --x-includes=${LOCALBASE}/include
+.endif
+.endif
+
+# Set the default for the installation of Postscript(TM)-
+# compatible functionality.
+.if !defined(USE_GHOSTSCRIPT)
+.	if defined(USE_GHOSTSCRIPT_BUILD)
+_USE_GHOSTSCRIPT=	${USE_GHOSTSCRIPT_BUILD}
+.	elif defined(USE_GHOSTSCRIPT_RUN)
+_USE_GHOSTSCRIPT=	${USE_GHOSTSCRIPT_RUN}
+.	endif
+.else
+_USE_GHOSTSCRIPT=	${USE_GHOSTSCRIPT}
+.endif
+
+.if defined(WITH_GHOSTSCRIPT_VER) && !empty(WITH_GHOSTSCRIPT_VER:M[789])
+_USE_GHOSTSCRIPT_DEFAULT_VER=	${WITH_GHOSTSCRIPT_VER}
+.else
+_USE_GHOSTSCRIPT_DEFAULT_VER=	9
+.endif
+
+.if defined(_USE_GHOSTSCRIPT)
+.	if !defined(WITHOUT_X11)
+_USE_GHOSTSCRIPT_PKGNAME_SUFFIX=
+.	else
+_USE_GHOSTSCRIPT_PKGNAME_SUFFIX=-nox11
+.	endif
+.	if !empty(_USE_GHOSTSCRIPT:M[789])
+_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT:M[789]}
+.	else
+_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER}
+.	endif
+.else
+_USE_GHOSTSCRIPT_VER=${_USE_GHOSTSCRIPT_DEFAULT_VER}
+.endif
+
+# Sanity check
+.if defined(_USE_GHOSTSCRIPT) && defined(WITH_GHOSTSCRIPT_VER)
+.	if empty(WITH_GHOSTSCRIPT_VER:M[789])
+.		error You set an invalid value "${WITH_GHOSTSCRIPT_VER}" in WITH_GHOSTSCRIPT_VER.  Abort.
+.	elif ${_USE_GHOSTSCRIPT_VER} != ${WITH_GHOSTSCRIPT_VER}
+.		error You set WITH_GHOSTSCRIPT_VER as ${WITH_GHOSTSCRIPT_VER} but ${PKGNAME} requires print/ghostscript${_USE_GHOSTSCRIPT_VER}.  Abort.
+.	endif
+.endif
+
+GHOSTSCRIPT_PORT?=	print/ghostscript${_USE_GHOSTSCRIPT_VER}${_USE_GHOSTSCRIPT_PKGNAME_SUFFIX}
+
+# Set up the ghostscript dependencies.
+.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_BUILD)
+BUILD_DEPENDS+=	gs:${PORTSDIR}/${GHOSTSCRIPT_PORT}
+.endif
+.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_RUN)
+RUN_DEPENDS+=	gs:${PORTSDIR}/${GHOSTSCRIPT_PORT}
+.endif
+
+# Macro for doing in-place file editing using regexps
+REINPLACE_ARGS?=	-i.bak
+REINPLACE_CMD?=	${SED} ${REINPLACE_ARGS}
+
+# Names of cookies used to skip already completed stages
+EXTRACT_COOKIE?=	${WRKDIR}/.extract_done.${PORTNAME}.${PREFIX:S/\//_/g}
+CONFIGURE_COOKIE?=	${WRKDIR}/.configure_done.${PORTNAME}.${PREFIX:S/\//_/g}
+INSTALL_COOKIE?=	${WRKDIR}/.install_done.${PORTNAME}.${PREFIX:S/\//_/g}
+BUILD_COOKIE?=		${WRKDIR}/.build_done.${PORTNAME}.${PREFIX:S/\//_/g}
+PATCH_COOKIE?=		${WRKDIR}/.patch_done.${PORTNAME}.${PREFIX:S/\//_/g}
+PACKAGE_COOKIE?=	${WRKDIR}/.package_done.${PORTNAME}.${PREFIX:S/\//_/g}
+STAGE_COOKIE?=		${WRKDIR}/.stage_done.${PORTNAME}.${PREFIX:S/\//_/g}
+
+# How to do nothing.  Override if you, for some strange reason, would rather
+# do something.
+DO_NADA?=		${TRUE}
+
+# Use this as the first operand to always build dependency.
+NONEXISTENT?=	/nonexistent
+
+CHECKSUM_ALGORITHMS?= sha256
+
+DISTINFO_FILE?=		${MASTERDIR}/distinfo
+
+MAKE_FLAGS?=	-f
+MAKEFILE?=		Makefile
+MAKE_CMD?=		/usr/bin/make
+MAKE_ENV+=		PREFIX=${PREFIX} \
+			LOCALBASE=${LOCALBASE} \
+			LIBDIR="${LIBDIR}" \
+			CC="${CC}" CFLAGS="${CFLAGS}" \
+			CPP="${CPP}" CPPFLAGS="${CPPFLAGS}" \
+			LDFLAGS="${LDFLAGS}" \
+			CXX="${CXX}" CXXFLAGS="${CXXFLAGS}" \
+			MANPREFIX="${MANPREFIX}"
+
+# Add -fno-strict-aliasing to CFLAGS with optimization level -O2 or higher.
+# gcc 4.x enable strict aliasing optimization with -O2 which is known to break
+# a lot of ports.
+.if !defined(WITHOUT_NO_STRICT_ALIASING)
+.if ${CC} != "icc"
+.if !empty(CFLAGS:M-O[23s]) && empty(CFLAGS:M-fno-strict-aliasing)
+CFLAGS+=       -fno-strict-aliasing
+.endif
+.endif
+.endif
+
+.if defined(USE_CSTD)
+CFLAGS:=	${CFLAGS:N-std=*} -std=${USE_CSTD}
+.endif
+
+.if defined(CFLAGS_${ARCH})
+CFLAGS+=	${CFLAGS_${ARCH}}
+.endif
+
+.if defined(USE_CXXSTD)
+CXXFLAGS:=	${CXXFLAGS:N-std=*} -std=${USE_CXXSTD}
+.endif
+
+.if defined(CXXFLAGS_${ARCH})
+CXXFLAGS+=	${CXXFLAGS_${ARCH}}
+.endif
+
+# Multiple make jobs support
+.if defined(DISABLE_MAKE_JOBS) || defined(MAKE_JOBS_UNSAFE)
+_MAKE_JOBS=		#
+MAKE_JOBS_NUMBER=	1
+.else
+.if defined(MAKE_JOBS_NUMBER)
+_MAKE_JOBS_NUMBER:=	${MAKE_JOBS_NUMBER}
+.else
+_MAKE_JOBS_NUMBER!=	${SYSCTL} -n kern.smp.cpus
+.endif
+.if defined(MAKE_JOBS_NUMBER_LIMIT) && ( ${MAKE_JOBS_NUMBER_LIMIT} < ${_MAKE_JOBS_NUMBER} )
+MAKE_JOBS_NUMBER=	${MAKE_JOBS_NUMBER_LIMIT}
+.else
+MAKE_JOBS_NUMBER=	${_MAKE_JOBS_NUMBER}
+.endif
+_MAKE_JOBS?=		-j${MAKE_JOBS_NUMBER}
+BUILD_FAIL_MESSAGE+=	Try to set MAKE_JOBS_UNSAFE=yes and rebuild before reporting the failure to the maintainer.
+.endif
+
+# ccache support
+# Support NO_CCACHE for common setups, require WITH_CCACHE_BUILD, and
+# don't use if ccache already set in CC
+.if !defined(NO_CCACHE) && defined(WITH_CCACHE_BUILD) && !${CC:M*ccache*} && \
+  !defined(NO_BUILD) && !defined(NOCCACHE)
+# Avoid depends loops between pkg and ccache
+.	if !${.CURDIR:M*/devel/ccache} && !${.CURDIR:M*/ports-mgmt/pkg}
+BUILD_DEPENDS+=		${LOCALBASE}/bin/ccache:${PORTSDIR}/devel/ccache
+.	endif
+
+_CCACHE_PATH=	${LOCALBASE}/libexec/ccache
+
+# Prepend the ccache dir into the PATH and setup ccache env
+PATH:=	${_CCACHE_PATH}:${PATH}
+.if !${MAKE_ENV:MPATH=*} && !${CONFIGURE_ENV:MPATH=*}
+MAKE_ENV+=			PATH=${PATH}
+CONFIGURE_ENV+=		PATH=${PATH}
+.endif
+
+.	if defined(CCACHE_DIR)
+MAKE_ENV+=		CCACHE_DIR="${CCACHE_DIR}"
+CONFIGURE_ENV+=	CCACHE_DIR="${CCACHE_DIR}"
+.	endif
+.endif
+
+PTHREAD_CFLAGS?=
+PTHREAD_LIBS?=		-pthread
+
+FETCH_ENV?=		SSL_NO_VERIFY_PEER=1 SSL_NO_VERIFY_HOSTNAME=1
+FETCH_BINARY?=	/usr/bin/fetch
+FETCH_ARGS?=	-Fpr
+FETCH_REGET?=	1
+.if !defined(DISABLE_SIZE)
+FETCH_BEFORE_ARGS+=	$${CKSIZE:+-S $$CKSIZE}
+.endif
+FETCH_CMD?=		${FETCH_BINARY} ${FETCH_ARGS}
+
+.if defined(RANDOMIZE_MASTER_SITES)
+.if exists(/usr/games/random)
+RANDOM_CMD?=	/usr/games/random
+RANDOM_ARGS?=	"-w -f -"
+_RANDOMIZE_SITES=	" |${RANDOM_CMD} ${RANDOM_ARGS}"
+.endif
+.endif
+
+TOUCH?=			/usr/bin/touch
+TOUCH_FLAGS?=	-f
+
+DISTORIG?=	.bak.orig
+PATCH?=			/usr/bin/patch
+PATCH_STRIP?=	-p0
+PATCH_DIST_STRIP?=	-p0
+.if defined(PATCH_DEBUG)
+PATCH_DEBUG_TMP=	yes
+PATCH_ARGS?=	-d ${PATCH_WRKSRC} -E ${PATCH_STRIP}
+PATCH_DIST_ARGS?=	--suffix ${DISTORIG} -d ${PATCH_WRKSRC} -E ${PATCH_DIST_STRIP}
+.else
+PATCH_DEBUG_TMP=	no
+PATCH_ARGS?=	-d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_STRIP}
+PATCH_DIST_ARGS?=	--suffix ${DISTORIG} -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP}
+.endif
+.if !defined(QUIET)
+PATCH_SILENT=		PATCH_SILENT=yes
+.endif
+.if defined(BATCH)
+PATCH_ARGS+=		--batch
+PATCH_DIST_ARGS+=	--batch
+.endif
+
+# Prevent breakage with VERSION_CONTROL=numbered
+PATCH_ARGS+=	-V simple
+
+.if defined(PATCH_CHECK_ONLY)
+PATCH_ARGS+=	-C
+PATCH_DIST_ARGS+=	-C
+.endif
+
+.if ${PATCH} == "/usr/bin/patch"
+PATCH_ARGS+=	--suffix .orig
+PATCH_DIST_ARGS+=	--suffix .orig
+.endif
+
+TAR?=	/usr/bin/tar
+
+# EXTRACT_SUFX is defined in .pre.mk section
+.if defined(USE_LHA)
+EXTRACT_CMD?=		${LHA_CMD}
+EXTRACT_BEFORE_ARGS?=	xfqw=${WRKDIR}
+EXTRACT_AFTER_ARGS?=
+.elif defined(USE_ZIP)
+EXTRACT_CMD?=		${UNZIP_CMD}
+EXTRACT_BEFORE_ARGS?=	-qo
+EXTRACT_AFTER_ARGS?=	-d ${WRKDIR}
+.else
+EXTRACT_CMD?=	${TAR}
+EXTRACT_BEFORE_ARGS?=	-xf
+.if defined(EXTRACT_PRESERVE_OWNERSHIP)
+EXTRACT_AFTER_ARGS?=
+.else
+EXTRACT_AFTER_ARGS?=	--no-same-owner --no-same-permissions
+.endif
+.endif
+
+# Figure out where the local mtree file is
+.if !defined(MTREE_FILE) && !defined(NO_MTREE)
+.if ${PREFIX} == /usr
+MTREE_FILE=	/etc/mtree/BSD.usr.dist
+.else
+MTREE_FILE=	${PORTSDIR}/Templates/BSD.local.dist
+.endif
+MTREE_FILE_DEFAULT=yes
+.endif
+MTREE_CMD?=	/usr/sbin/mtree
+MTREE_ARGS?=	-U ${MTREE_FOLLOWS_SYMLINKS} -f ${MTREE_FILE} -d -e -p
+
+READLINK_CMD?=	/usr/bin/readlink
+
+# Determine whether or not we can use rootly owner/group functions.
+.if ${UID} == 0
+_BINOWNGRP=	-o ${BINOWN} -g ${BINGRP}
+_SHROWNGRP=	-o ${SHAREOWN} -g ${SHAREGRP}
+_MANOWNGRP=	-o ${MANOWN} -g ${MANGRP}
+.else
+_BINOWNGRP=
+_SHROWNGRP=
+_MANOWNGRP=
+.endif
+
+# A few aliases for *-install targets
+INSTALL_PROGRAM= \
+	${INSTALL} ${COPY} ${STRIP} ${_BINOWNGRP} -m ${BINMODE}
+INSTALL_KLD= \
+	${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE}
+INSTALL_LIB= \
+	${INSTALL} ${COPY} ${STRIP} ${_SHROWNGRP} -m ${SHAREMODE}
+INSTALL_SCRIPT= \
+	${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE}
+INSTALL_DATA= \
+	${INSTALL} ${COPY} ${_SHROWNGRP} -m ${SHAREMODE}
+INSTALL_MAN= \
+	${INSTALL} ${COPY} ${_MANOWNGRP} -m ${MANMODE}
+
+INSTALL_MACROS=	BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
+			BSD_INSTALL_LIB="${INSTALL_LIB}" \
+			BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
+			BSD_INSTALL_DATA="${INSTALL_DATA}" \
+			BSD_INSTALL_MAN="${INSTALL_MAN}"
+MAKE_ENV+=	${INSTALL_MACROS}
+SCRIPTS_ENV+=	${INSTALL_MACROS}
+
+# Macro for copying entire directory tree with correct permissions
+.if ${UID} == 0
+COPYTREE_BIN=	${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
+					2>&1) && \
+					${CHOWN} -Rh ${BINOWN}:${BINGRP} $$1 && \
+					${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
+					${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' --
+COPYTREE_SHARE=	${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
+					2>&1) && \
+					${CHOWN} -Rh ${SHAREOWN}:${SHAREGRP} $$1 && \
+					${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
+					${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' --
+.else
+COPYTREE_BIN=	${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
+					2>&1) && \
+					${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
+					${FIND} -d $$0 $$2 -type f -exec chmod ${BINMODE} $$1/{} \;' --
+COPYTREE_SHARE=	${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \
+					2>&1) && \
+					${FIND} -d $$0 $$2 -type d -exec chmod 755 $$1/{} \; && \
+					${FIND} -d $$0 $$2 -type f -exec chmod ${SHAREMODE} $$1/{} \;' --
+.endif
+
+# The user can override the NO_PACKAGE by specifying this from
+# the make command line
+.if defined(FORCE_PACKAGE)
+.undef NO_PACKAGE
+.endif
+
+DESCR?=			${PKGDIR}/pkg-descr
+PLIST?=			${PKGDIR}/pkg-plist
+PKGHELP?=		${PKGDIR}/pkg-help
+PKGINSTALL?=	${PKGDIR}/pkg-install
+PKGDEINSTALL?=	${PKGDIR}/pkg-deinstall
+PKGREQ?=		${PKGDIR}/pkg-req
+PKGMESSAGE?=	${PKGDIR}/pkg-message
+
+TMPPLIST?=	${WRKDIR}/.PLIST.mktmp
+TMPPLIST_SORT?=	${WRKDIR}/.PLIST.mktmp.sorted
+TMPGUCMD?=	${WRKDIR}/.PLIST.gucmd
+
+.if !defined(PKG_ARGS)
+PKG_ARGS=		-v -c -${COMMENT:Q} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`cd ${.CURDIR} && ${MAKE} actual-package-depends | ${GREP} -v -E ${PKG_IGNORE_DEPENDS} | ${SORT} -u -t : -k 2`" ${EXTRA_PKG_ARGS} $${_LATE_PKG_ARGS}
+.if !defined(NO_MTREE)
+PKG_ARGS+=		-m ${MTREE_FILE}
+.endif
+.if defined(PKGORIGIN)
+PKG_ARGS+=		-o ${PKGORIGIN}
+.endif
+.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS)
+PKG_ARGS+=		-C "${CONFLICTS}"
+.endif
+.if defined(CONFLICTS_INSTALL) && !defined(DISABLE_CONFLICTS)
+PKG_ARGS+=		-C "${CONFLICTS_INSTALL}"
+.endif
+.endif
+.if defined(PKG_NOCOMPRESS)
+PKG_SUFX?=		.tar
+.else
+.if defined(WITH_PKGNG)
+PKG_SUFX?=		.txz
+.else
+PKG_SUFX?=		.tbz
+.endif
+.endif
+# where pkg_add records its dirty deeds.
+PKG_DBDIR?=		/var/db/pkg
+
+ALL_TARGET?=		all
+INSTALL_TARGET?=	install
+INSTALL_TARGET+=	${LATE_INSTALL_ARGS}
+
+# Integrate with the license auditing framework
+.if !defined (DISABLE_LICENSES)
+.include "${PORTSDIR}/Mk/bsd.licenses.mk"
+.endif
+
+# Popular master sites
+.include "${PORTSDIR}/Mk/bsd.sites.mk"
+
+# Empty declaration to avoid "variable MASTER_SITES recursive" error
+MASTER_SITES?=
+PATCH_SITES?=
+_MASTER_SITES_DEFAULT?=
+_PATCH_SITES_DEFAULT?=
+
+# Feed internal _{MASTER,PATCH}_SITES_n where n is a group designation
+# as per grouping rules (:something)
+# Organize _{MASTER,PATCH}_SITES_{DEFAULT,[^/:]+} according to grouping
+# rules (:something)
+.for _S in ${MASTER_SITES}
+_S_TEMP=	${_S:S/^${_S:C@/?:[^/:]+$@/@}//:S/^://}
+.	if !empty(_S_TEMP)
+.		for _group in ${_S_TEMP:S/,/ /g}
+_G_TEMP=	${_group}
+.			if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
+check-makevars::
+				@${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
+				@${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITES"
+				@${FALSE}
+.			endif
+_MASTER_SITES_${_group}+=	${_S:C@^(.*/):[^/:]+$@\1@}
+.		endfor
+.	else
+_MASTER_SITES_DEFAULT+=	${_S:C@^(.*/):[^/:]+$@\1@}
+.	endif
+.endfor
+.for _S in ${PATCH_SITES}
+_S_TEMP=	${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
+.	if !empty(_S_TEMP)
+.		for _group in ${_S_TEMP:S/,/ /g}
+_G_TEMP=	${_group}
+.			if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
+check-makevars::
+				@${ECHO_MSG} "The words all, ALL and default are reserved and cannot be"
+				@${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITES"
+				@${FALSE}
+.			endif
+_PATCH_SITES_${_group}+=	${_S:C@^(.*/):[^/:]+$@\1@}
+.		endfor
+.	else
+_PATCH_SITES_DEFAULT+=	${_S:C@^(.*/):[^/:]+$@\1@}
+.	endif
+.endfor
+
+# Feed internal _{MASTER,PATCH}_SITE_SUBDIR_n where n is a group designation
+# as per grouping rules (:something)
+# Organize _{MASTER,PATCH}_SITE_SUBDIR_{DEFAULT,[^/:]+} according to grouping
+# rules (:something)
+.for _S in ${MASTER_SITE_SUBDIR}
+_S_TEMP=	${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
+.	if !empty(_S_TEMP)
+.		for _group in ${_S_TEMP:S/,/ /g}
+_G_TEMP=	${_group}
+.			if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
+check-makevars::
+				@${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
+				@${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITE_SUBDIR"
+				@${FALSE}
+.			endif
+.			if defined(_MASTER_SITES_${_group})
+_MASTER_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@}
+.			endif
+.		endfor
+.	else
+.		if defined(_MASTER_SITES_DEFAULT)
+_MASTER_SITE_SUBDIR_DEFAULT+=	${_S:C@^(.*)/:[^/:]+$@\1@}
+.		endif
+.	endif
+.endfor
+.for _S in ${PATCH_SITE_SUBDIR}
+_S_TEMP=	${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
+.	if !empty(_S_TEMP)
+.		for _group in ${_S_TEMP:S/,/ /g}
+_G_TEMP=	${_group}
+.			if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default
+check-makevars::
+				@${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be"
+				@${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITE_SUBDIR"
+				@${FALSE}
+.			endif
+.			if defined(_PATCH_SITES_${_group})
+_PATCH_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@}
+.			endif
+.		endfor
+.	else
+.		if defined(_PATCH_SITES_DEFAULT)
+_PATCH_SITE_SUBDIR_DEFAULT+=	${_S:C@^(.*)/:[^/:]+$@\1@}
+.		endif
+.	endif
+.endfor
+
+# Substitute subdirectory names
+# XXX simpler/faster solution but not the best space wise, suggestions please
+.for _S in ${MASTER_SITES}
+_S_TEMP=	${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
+.	if !empty(_S_TEMP)
+.		for _group in ${_S_TEMP:S/,/ /g}
+.			if !defined(_MASTER_SITE_SUBDIR_${_group})
+MASTER_SITES_TMP=	${_MASTER_SITES_${_group}:S^%SUBDIR%/^^}
+.			else
+_S_TEMP_TEMP=		${_MASTER_SITES_${_group}:M*%SUBDIR%/*}
+.				if empty(_S_TEMP_TEMP)
+MASTER_SITES_TMP=	${_MASTER_SITES_${_group}}
+.				else
+MASTER_SITES_TMP=
+.					for site in ${_MASTER_SITES_${_group}}
+_S_TEMP_TEMP=	${site:M*%SUBDIR%/*}
+.						if empty(_S_TEMP_TEMP)
+MASTER_SITES_TMP+=	${site}
+.						else
+.							for dir in ${_MASTER_SITE_SUBDIR_${_group}}
+MASTER_SITES_TMP+=	${site:S^%SUBDIR%^\${dir}^}
+.							endfor
+.						endif
+.					endfor
+.				endif
+.			endif
+_MASTER_SITES_${_group}:=	${MASTER_SITES_TMP}
+.		endfor
+.	endif
+.endfor
+.if defined(_MASTER_SITE_SUBDIR_DEFAULT)
+_S_TEMP=	${_MASTER_SITES_DEFAULT:M*%SUBDIR%/*}
+.	if empty(_S_TEMP)
+MASTER_SITES_TMP=	${_MASTER_SITES_DEFAULT}
+.	else
+MASTER_SITES_TMP=
+.		for site in ${_MASTER_SITES_DEFAULT}
+_S_TEMP_TEMP=		${site:M*%SUBDIR%/*}
+.			if empty(_S_TEMP_TEMP)
+MASTER_SITES_TMP+=	${site}
+.			else
+.				for dir in ${_MASTER_SITE_SUBDIR_DEFAULT}
+MASTER_SITES_TMP+=	${site:S^%SUBDIR%^\${dir}^}
+.				endfor
+.			endif
+.		endfor
+.	endif
+.else
+MASTER_SITES_TMP=	${_MASTER_SITES_DEFAULT:S^%SUBDIR%/^^}
+.endif
+_MASTER_SITES_DEFAULT:=	${MASTER_SITES_TMP}
+MASTER_SITES_TMP=
+.for _S in ${PATCH_SITES}
+_S_TEMP=	${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://}
+.	if !empty(_S_TEMP)
+.		for _group in ${_S_TEMP:S/,/ /g}
+.			if !defined(_PATCH_SITE_SUBDIR_${_group})
+PATCH_SITES_TMP=	${_PATCH_SITES_${_group}:S^%SUBDIR%/^^}
+.			else
+_S_TEMP_TEMP=		${_PATCH_SITES_${_group}:M*%SUBDIR%/*}
+.				if empty(_S_TEMP_TEMP)
+PATCH_SITES_TMP=	${_PATCH_SITES_${_group}}
+.				else
+PATCH_SITES_TMP=
+.					for site in ${_PATCH_SITES_${_group}}
+_S_TEMP_TEMP=	${site:M*%SUBDIR%/*}
+.						if empty(_S_TEMP_TEMP)
+PATCH_SITES_TMP+=	${site}
+.						else
+.							for dir in ${_PATCH_SITE_SUBDIR_${_group}}
+PATCH_SITES_TMP+=	${site:S^%SUBDIR%^\${dir}^}
+.							endfor
+.						endif
+.					endfor
+.				endif
+.			endif
+_PATCH_SITES_${_group}:=	${PATCH_SITES_TMP}
+.		endfor
+.	endif
+.endfor
+.if defined(_PATCH_SITE_SUBDIR_DEFAULT)
+_S_TEMP=	${_PATCH_SITES_DEFAULT:M*%SUBDIR%/*}
+.	if empty(_S_TEMP)
+PATCH_SITES_TMP=	${_PATCH_SITES_DEFAULT}
+.	else
+PATCH_SITES_TMP=
+.		for site in ${_PATCH_SITES_DEFAULT}
+_S_TEMP_TEMP=		${site:M*%SUBDIR%/*}
+.			if empty(_S_TEMP_TEMP)
+PATCH_SITES_TMP+=	${site}
+.			else
+.				for dir in ${_PATCH_SITE_SUBDIR_DEFAULT}
+PATCH_SITES_TMP+=	${site:S^%SUBDIR%^\${dir}^}
+.				endfor
+.			endif
+.		endfor
+.	endif
+.else
+PATCH_SITES_TMP=	${_PATCH_SITES_DEFAULT:S^%SUBDIR%/^^}
+.endif
+_PATCH_SITES_DEFAULT:=	${PATCH_SITES_TMP}
+PATCH_SITES_TMP=
+
+# The primary backup site.
+MASTER_SITE_BACKUP?=	\
+	ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/
+MASTER_SITE_BACKUP:=	${MASTER_SITE_BACKUP:S^\${DIST_SUBDIR}/^^}
+
+# If the user has MASTER_SITE_FREEBSD set, go to the FreeBSD repository
+# for everything, but don't search it twice by appending it to the end.
+.if defined(MASTER_SITE_FREEBSD)
+_MASTER_SITE_OVERRIDE:=	${MASTER_SITE_BACKUP}
+_MASTER_SITE_BACKUP:=	# empty
+.else
+_MASTER_SITE_OVERRIDE=	${MASTER_SITE_OVERRIDE}
+_MASTER_SITE_BACKUP=	${MASTER_SITE_BACKUP}
+.endif
+
+# Search CDROM first if mounted, symlink instead of copy if
+# FETCH_SYMLINK_DISTFILES is set
+.for MOUNTPT in ${CD_MOUNTPTS}
+.if exists(${MOUNTPT}/ports/distfiles)
+_MASTER_SITE_OVERRIDE:=	file:${MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${_MASTER_SITE_OVERRIDE}
+.if defined(FETCH_SYMLINK_DISTFILES)
+FETCH_BEFORE_ARGS+=	-l
+.endif
+.endif
+.endfor
+
+NOFETCHFILES?=
+
+# Organize DISTFILES, PATCHFILES, _MASTER_SITES_ALL, _PATCH_SITES_ALL
+# according to grouping rules (:something)
+DISTFILES?=		${DISTNAME}${EXTRACT_SUFX}
+_MASTER_SITES_ALL=	${_MASTER_SITES_DEFAULT}
+_PATCH_SITES_ALL=	${_PATCH_SITES_DEFAULT}
+_G_TEMP=	DEFAULT
+.for _D in ${DISTFILES}
+_D_TEMP=	${_D:S/^${_D:C/:[^:]+$//}//}
+.	if !empty(_D_TEMP)
+.		for _group in ${_D_TEMP:S/^://:S/,/ /g}
+.			if !defined(_MASTER_SITES_${_group})
+_G_TEMP_TEMP=	${_G_TEMP:M/${_group}/}
+.				if empty(_G_TEMP_TEMP)
+_G_TEMP+=	${_group}
+_MASTER_SITES_ALL+=	${_MASTER_SITES_${_group}}
+.				endif
+.			endif
+.		endfor
+_DISTFILES+=	${_D:C/:[^:]+$//}
+.	else
+_DISTFILES+=	${_D}
+.	endif
+.endfor
+_G_TEMP=	DEFAULT
+.for _P in ${PATCHFILES}
+_P_TEMP=	${_P:C/:[^-:][^:]*$//}
+_P_groups=	${_P:S/^${_P:C/:[^:]+$//}//:S/^://}
+_P_file=	${_P_TEMP:C/:-[^:]+$//}
+_P_strip=	${_P_TEMP:S/^${_P_TEMP:C/:-[^:]*$//}//:S/^://}
+.	if !empty(_P_groups)
+.		for _group in ${_P_groups:S/,/ /g}
+.			if !defined(_PATCH_SITES_${_group})
+_G_TEMP_TEMP=	${_G_TEMP:M/${_group}/}
+.				if empty(_G_TEMP_TEMP)
+_G_TEMP+=	${_group}
+_PATCH_SITES_ALL+=	${_PATCH_SITES_${_group}}
+.				endif
+.			endif
+.		endfor
+.	endif
+_PATCHFILES:=	${_PATCHFILES} ${_P_file}
+.	if !empty(_P_strip)
+_PATCH_DIST_STRIP_CASES:=	${_PATCH_DIST_STRIP_CASES} ("${_P_file}") printf %s "${_P_strip}" ;;
+.	endif
+.endfor
+_P_groups=
+_P_file=
+_P_strip=
+_G_TEMP=
+_G_TEMP_TEMP=
+ALLFILES?=	${_DISTFILES} ${_PATCHFILES}
+
+#
+# Sort the master site list according to the patterns in MASTER_SORT
+#
+MASTER_SORT?=
+MASTER_SORT_REGEX?=
+MASTER_SORT_REGEX+=	${MASTER_SORT:S|.|\\.|g:S|^|://[^/]*|:S|$|/|}
+
+MASTER_SORT_AWK=	BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S|\\|\\\\|g}"; }
+.for srt in ${MASTER_SORT_REGEX}
+MASTER_SORT_AWK+=	/${srt:S|/|\\/|g}/ { good["${srt:S|\\|\\\\|g}"] = good["${srt:S|\\|\\\\|g}"] " " $$0 ; next; }
+.endfor
+MASTER_SORT_AWK+=	{ rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; }
+
+SORTED_MASTER_SITES_DEFAULT_CMD=	cd ${.CURDIR} && ${MAKE} master-sites-DEFAULT
+SORTED_PATCH_SITES_DEFAULT_CMD=		cd ${.CURDIR} && ${MAKE} patch-sites-DEFAULT
+SORTED_MASTER_SITES_ALL_CMD=	cd ${.CURDIR} && ${MAKE} master-sites-ALL
+SORTED_PATCH_SITES_ALL_CMD=	cd ${.CURDIR} && ${MAKE} patch-sites-ALL
+
+# has similar effect to old targets, i.e., access only {MASTER,PATCH}_SITES, not working with the new _n variables
+master-sites-DEFAULT:
+	@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+patch-sites-DEFAULT:
+	@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+
+#
+# Sort the master site list according to the patterns in MASTER_SORT
+# according to grouping rules (:something)
+#
+# for use in the fetch targets
+.for _S in ${MASTER_SITES}
+_S_TEMP=	${_S:S/^${_S:C@/:[^/:]+$@/@}//}
+.	if !empty(_S_TEMP)
+.		for _group in ${_S_TEMP:S/^://:S/,/ /g}
+.			if !target(master-sites-${_group})
+SORTED_MASTER_SITES_${_group}_CMD=	cd ${.CURDIR} && ${MAKE} master-sites-${_group}
+master-sites-${_group}:
+	@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+.			endif
+.		endfor
+.	endif
+.endfor
+.for _S in ${PATCH_SITES}
+_S_TEMP=	${_S:S/^${_S:C@/:[^/:]+$@/@}//}
+.	if !empty(_S_TEMP)
+.		for _group in ${_S_TEMP:S/^://:S/,/ /g}
+.			if !target(patch-sites-${_group})
+SORTED_PATCH_SITES_${_group}_CMD=	cd ${.CURDIR} && ${MAKE} patch-sites-${_group}
+patch-sites-${_group}:
+	@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+.			endif
+.		endfor
+.	endif
+.endfor
+
+#
+# Hackery to enable simple fetch targets with several dynamic MASTER_SITES
+#
+_MASTER_SITES_ENV=	_MASTER_SITES_DEFAULT="${_MASTER_SITES_DEFAULT}"
+.for _F in ${DISTFILES}
+_F_TEMP=	${_F:S/^${_F:C/:[^:]+$//}//:S/^://}
+.	if !empty(_F_TEMP)
+.		for _group in ${_F_TEMP:S/,/ /g}
+.			if defined(_MASTER_SITES_${_group})
+_MASTER_SITES_ENV+=	_MASTER_SITES_${_group}="${_MASTER_SITES_${_group}}"
+.			endif
+.		endfor
+.	endif
+.endfor
+_PATCH_SITES_ENV=	_PATCH_SITES_DEFAULT="${_PATCH_SITES_DEFAULT}"
+.for _F in ${PATCHFILES}
+_F_TEMP=	${_F:S/^${_F:C/:[^-:][^:]*$//}//:S/^://}
+.	if !empty(_F_TEMP)
+.		for _group in ${_F_TEMP:S/,/ /g}
+.			if defined(_PATCH_SITES_${_group})
+_PATCH_SITES_ENV+=	_PATCH_SITES_${_group}="${_PATCH_SITES_${_group}}"
+.			endif
+.		endfor
+.	endif
+.endfor
+
+master-sites-ALL:
+	@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+patch-sites-ALL:
+	@${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}
+
+# synonyms, mnemonics
+master-sites-all: master-sites-ALL
+patch-sites-all: patch-sites-ALL
+master-sites-default: master-sites-DEFAULT
+patch-sites-default: patch-sites-DEFAULT
+
+# compatibility with old behavior
+master-sites: master-sites-DEFAULT
+patch-sites: patch-sites-DEFAULT
+
+.if defined(IGNOREFILES)
+.if !defined(CKSUMFILES)
+.  for _f in ${ALLFILES}
+.    if ! ${IGNOREFILES:M${_f}}
+CKSUMFILES+=	${_f}
+.   endif
+.  endfor
+.  undef _f
+.endif
+.else
+CKSUMFILES=		${ALLFILES}
+.endif
+
+# List of all files, with ${DIST_SUBDIR} in front.  Used for checksum.
+.if defined(DIST_SUBDIR)
+.if defined(CKSUMFILES) && ${CKSUMFILES}!=""
+_CKSUMFILES?=	${CKSUMFILES:S/^/${DIST_SUBDIR}\//}
+.endif
+.if defined(IGNOREFILES) && ${IGNOREFILES}!=""
+_IGNOREFILES?=	${IGNOREFILES:S/^/${DIST_SUBDIR}\//}
+.endif
+.else
+_CKSUMFILES?=	${CKSUMFILES}
+_IGNOREFILES?=	${IGNOREFILES}
+.endif
+
+# This is what is actually going to be extracted, and is overridable
+#  by user.
+EXTRACT_ONLY?=	${_DISTFILES}
+
+.if !target(maintainer)
+maintainer:
+	@${ECHO_CMD} "${MAINTAINER}"
+.endif
+
+.if !defined(CATEGORIES)
+check-categories:
+	@${ECHO_MSG} "${PKGNAME}: Makefile error: CATEGORIES is mandatory."
+	@${FALSE}
+.else
+
+VALID_CATEGORIES+= accessibility afterstep arabic archivers astro audio \
+	benchmarks biology cad chinese comms converters databases \
+	deskutils devel docs dns editors elisp emulators enlightenment finance french ftp \
+	games geography german gnome gnustep graphics hamradio haskell hebrew hungarian \
+	ipv6 irc japanese java kde kld korean lang linux lisp \
+	mail mate math mbone misc multimedia net net-im net-mgmt net-p2p news \
+	palm parallel pear perl5 plan9 polish portuguese ports-mgmt \
+	print python ruby rubygems russian \
+	scheme science security shells spanish sysutils \
+	tcl textproc tk \
+	ukrainian vietnamese windowmaker www \
+	x11 x11-clocks x11-drivers x11-fm x11-fonts x11-servers x11-themes \
+	x11-toolkits x11-wm xfce zope
+
+check-categories:
+.for cat in ${CATEGORIES}
+.	if empty(VALID_CATEGORIES:M${cat})
+		@${ECHO_MSG} "${PKGNAME}: Makefile error: category ${cat} not in list of valid categories."; \
+		${FALSE};
+.	endif
+.endfor
+.endif
+
+PKGREPOSITORYSUBDIR?=	All
+PKGREPOSITORY?=		${PACKAGES}/${PKGREPOSITORYSUBDIR}
+.if exists(${PACKAGES})
+PKGFILE?=		${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX}
+.else
+PKGFILE?=		${.CURDIR}/${PKGNAME}${PKG_SUFX}
+.endif
+
+# The "latest version" link -- ${PKGNAME} minus everthing after the last '-'
+PKGLATESTREPOSITORY?=	${PACKAGES}/Latest
+PKGBASE?=			${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}
+LATEST_LINK?=		${PKGBASE}
+PKGLATESTFILE=		${PKGLATESTREPOSITORY}/${LATEST_LINK}${PKG_SUFX}
+
+CONFIGURE_SCRIPT?=	configure
+CONFIGURE_TARGET?=	${ARCH}-portbld-freebsd${OSREL}
+CONFIGURE_TARGET:=	${CONFIGURE_TARGET:S/--build=//}
+CONFIGURE_LOG?=		config.log
+
+# A default message to print if do-configure fails.
+CONFIGURE_FAIL_MESSAGE?=	"Please report the problem to ${MAINTAINER} [maintainer] and attach the \"${CONFIGURE_WRKSRC}/${CONFIGURE_LOG}\" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. a ${PKG_INFO} -Ea)."
+
+.if defined(GNU_CONFIGURE)
+# Maximum command line length
+.if !defined(CONFIGURE_MAX_CMD_LEN)
+CONFIGURE_MAX_CMD_LEN!=	${SYSCTL} -n kern.argmax
+.endif
+GNU_CONFIGURE_PREFIX?=	${PREFIX}
+GNU_CONFIGURE_MANPREFIX?=	${MANPREFIX}
+CONFIG_SITE?=		${PORTSDIR}/Templates/config.site
+CONFIGURE_ARGS+=	--prefix=${GNU_CONFIGURE_PREFIX} $${_LATE_CONFIGURE_ARGS}
+CONFIGURE_ENV+=		CONFIG_SITE=${CONFIG_SITE} lt_cv_sys_max_cmd_len=${CONFIGURE_MAX_CMD_LEN}
+HAS_CONFIGURE=		yes
+
+SET_LATE_CONFIGURE_ARGS= \
+     _LATE_CONFIGURE_ARGS="" ; \
+	if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--mandir'`" ]; then \
+	    _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --mandir=${GNU_CONFIGURE_MANPREFIX}/man" ; \
+	fi ; \
+	if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--infodir'`" ]; then \
+	    _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --infodir=${GNU_CONFIGURE_PREFIX}/${INFO_PATH}/${INFO_SUBDIR}" ; \
+	fi ; \
+	if [ -z "`./${CONFIGURE_SCRIPT} --version 2>&1 | ${EGREP} -i '(autoconf.*2\.13|Unrecognized option)'`" ]; then \
+		_LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --build=${CONFIGURE_TARGET}" ; \
+	else \
+		_LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} ${CONFIGURE_TARGET}" ; \
+	fi ;
+.endif
+
+# Passed to most of script invocations
+SCRIPTS_ENV+=	CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \
+		  WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \
+		  SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \
+		  PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE}
+
+.if defined(BATCH)
+SCRIPTS_ENV+=	BATCH=yes
+.endif
+
+.if ${PREFIX} == /usr
+MANPREFIX?=	/usr/share
+.else
+MANPREFIX?=	${PREFIX}
+.endif
+
+MANDIRS+=	${MANPREFIX}/man
+.for sect in 1 2 3 4 5 6 7 8 9
+MAN${sect}PREFIX?=	${MANPREFIX}
+.endfor
+MANLPREFIX?=	${MANPREFIX}
+MANNPREFIX?=	${MANPREFIX}
+
+MANLANG?=	""	# english only by default
+
+.if !defined(NO_MANCOMPRESS)
+MANEXT=	.gz
+.endif
+
+.if (defined(MLINKS) || defined(_MLINKS_PREPEND)) && !defined(_MLINKS)
+
+.if defined(.PARSEDIR)
+_MLINKS=	 ${_MLINKS_PREPEND} \
+		 ${MANLANG:S,^,man/,:S,/"",,:@m@${MLINKS:@p@${MAN${p:E:C/(.).*/\1/g}PREFIX}/$m/man${p:E:C/(.).*/\1/g}/$p${MANEXT}@}@}
+.else
+__pmlinks!=	${ECHO_CMD} '${MLINKS:S/	/ /}' | ${AWK} \
+ '{ if (NF % 2 != 0) { print "broken"; exit; } \
+	for (i=1; i<=NF; i++) { \
+		if ($$i ~ /^-$$/ && i != 1 && i % 2 != 0) \
+			{ $$i = $$(i-2); printf " " $$i " "; } \
+		else if ($$i ~ /^[^ ]+\.[1-9ln][^. ]*$$/ || $$i ~ /^\//) \
+			printf " " $$i " "; \
+		else \
+			{ print "broken"; exit; } \
+	} \
+  }' | ${SED} -e 's \([^/ ][^ ]*\.\(.\)[^. ]*\) $${MAN\2PREFIX}/$$$$$$$${__lang}/man\2/\1${MANEXT}g' -e 's/ //g' -e 's/MANlPREFIX/MANLPREFIX/g' -e 's/MANnPREFIX/MANNPREFIX/g'
+.if ${__pmlinks:Mbroken} == "broken"
+check-makevars::
+	@${ECHO_MSG} "${PKGNAME}: Makefile error: unable to parse MLINKS."
+	@${FALSE}
+.endif
+_MLINKS=	${_MLINKS_PREPEND}
+
+.for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
+.for ___pmlinks in ${__pmlinks}
+.for __lang in ${lang}
+_MLINKS+=	${___pmlinks:S// /g}
+.endfor
+.endfor
+.endfor
+.endif
+.endif
+_COUNT=0
+.for ___tpmlinks in ${_MLINKS}
+.if ${_COUNT} == "1"
+_TMLINKS+=	${___tpmlinks}
+_COUNT=0
+.else
+_COUNT=1
+.endif
+.endfor
+
+.for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%}
+
+.for sect in 1 2 3 4 5 6 7 8 9 L N
+# MAN${sect} is for man pages installed for all languages in MANLANG for a given
+# section.
+.if defined(MAN${sect})
+_MANPAGES+=	${MAN${sect}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%}
+.endif
+
+# Language specific MAN${sect} variables are for man pages installed in that
+# language, but not necessarily all languages in MANLANG.
+.if defined(MAN${sect}_${manlang:S%^man/%%:U})
+_MANPAGES+=	${MAN${sect}_${manlang:S%^man/%%:U}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%}
+.endif
+
+.endfor
+
+.endfor
+
+# Special case for English, since it is defined with "" in MANLANG rather than
+# a language name and does not have man pages installed in a lang subdirectory
+# of MAN${sect}PREFIX.
+.for sect in 1 2 3 4 5 6 7 8 9 L N
+.if defined(MAN${sect}_EN)
+_MANPAGES+=	${MAN${sect}_EN:S%^%${MAN${sect}PREFIX}/man/man${sect:L}/%}
+.endif
+.endfor
+
+.if !defined(_TMLINKS)
+_TMLINKS=
+.endif
+
+.if defined(_MANPAGES)
+
+.if defined(NO_MANCOMPRESS)
+__MANPAGES:=	${_MANPAGES:S%^${PREFIX}/%%}
+.else
+__MANPAGES:=	${_MANPAGES:S%^${PREFIX}/%%:S%$%.gz%}
+.endif
+
+.if ${MANCOMPRESSED} == "yes"
+_MANPAGES:=	${_MANPAGES:S%$%.gz%}
+.endif
+
+.endif
+
+.if ${PREFIX} == /usr
+INFO_PATH?=	share/info
+.else
+INFO_PATH?=	info
+.endif
+
+.if defined(INFO)
+. for D in ${INFO:H}
+RD:=	${D}
+.  if ${RD} != "."
+.   if !defined(INFO_SUBDIR)
+INFO_SUBDIR:=	${RD}
+.   elif ${INFO_SUBDIR} != ${RD}
+BROKEN=		only one subdirectory in INFO is allowed
+.   endif
+.  endif
+.undef RD
+. endfor
+.endif
+
+DOCSDIR_REL?=	${DOCSDIR:S,^${PREFIX}/,,}
+EXAMPLESDIR_REL?=	${EXAMPLESDIR:S,^${PREFIX}/,,}
+DATADIR_REL?=	${DATADIR:S,^${PREFIX}/,,}
+WWWDIR_REL?=	${WWWDIR:S,^${PREFIX}/,,}
+ETCDIR_REL?=	${ETCDIR:S,^${PREFIX}/,,}
+
+PLIST_SUB+=	DOCSDIR="${DOCSDIR_REL}" \
+		EXAMPLESDIR="${EXAMPLESDIR_REL}" \
+		DATADIR="${DATADIR_REL}" \
+		WWWDIR="${WWWDIR_REL}" \
+		ETCDIR="${ETCDIR_REL}"
+
+DESKTOPDIR?=		${PREFIX}/share/applications
+_DESKTOPDIR_REL=	${DESKTOPDIR:S,^${PREFIX}/,,}/
+
+.if ${_DESKTOPDIR_REL} == ${DESKTOPDIR}/
+# DESKTOPDIR is not beneath PREFIX
+_DESKTOPDIR_REL=
+.endif
+
+.MAIN: all
+
+################################################################
+# Many ways to disable a port.
+#
+# If we're in BATCH mode and the port is interactive, or we're
+# in interactive mode and the port is non-interactive, skip all
+# the important targets.  The reason we have two modes is that
+# one might want to leave a build in BATCH mode running
+# overnight, then come back in the morning and do _only_ the
+# interactive ones that required your intervention.
+#
+# Ignore ports that can't be resold if building for a CDROM.
+#
+# Don't build a port if it's restricted and we don't want to get
+# into that.
+#
+# Don't build a port if it's broken, unless we're running a parallel
+# build (in case it's fixed).
+#
+# Don't build a port if it's forbidden for whatever reason.
+#
+# Don't build a port if the system is too old.
+################################################################
+
+# Check the machine architectures
+.if defined(ONLY_FOR_ARCHS)
+.for __ARCH in ${ONLY_FOR_ARCHS}
+.if ${ARCH:M${__ARCH}} != ""
+__ARCH_OK?=		1
+.endif
+.endfor
+.else
+__ARCH_OK?=		1
+.endif
+
+.if defined(NOT_FOR_ARCHS)
+.for __NARCH in ${NOT_FOR_ARCHS}
+.if ${ARCH:M${__NARCH}} != ""
+.undef __ARCH_OK
+.endif
+.endfor
+.endif
+
+.if !defined(__ARCH_OK)
+.if defined(ONLY_FOR_ARCHS)
+IGNORE=		is only for ${ONLY_FOR_ARCHS},
+.else # defined(NOT_FOR_ARCHS)
+IGNORE=		does not run on ${NOT_FOR_ARCHS},
+.endif
+IGNORE+=	while you are running ${ARCH}
+
+.if defined(ONLY_FOR_ARCHS_REASON_${ARCH})
+IGNORE+=	(reason: ${ONLY_FOR_ARCHS_REASON_${ARCH}})
+.elif defined(ONLY_FOR_ARCHS_REASON)
+IGNORE+=	(reason: ${ONLY_FOR_ARCHS_REASON})
+.endif
+
+.if defined(NOT_FOR_ARCHS_REASON_${ARCH})
+IGNORE+=	(reason: ${NOT_FOR_ARCHS_REASON_${ARCH}})
+.elif defined(NOT_FOR_ARCHS_REASON)
+IGNORE+=	(reason: ${NOT_FOR_ARCHS_REASON})
+.endif
+
+.endif
+
+# Check the user interaction and legal issues
+.if !defined(NO_IGNORE)
+.if (defined(IS_INTERACTIVE) && defined(BATCH))
+IGNORE=		is an interactive port
+.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE))
+IGNORE=		is not an interactive port
+.elif (defined(NO_CDROM) && defined(FOR_CDROM))
+IGNORE=		may not be placed on a CDROM: ${NO_CDROM}
+.elif (defined(RESTRICTED) && defined(NO_RESTRICTED))
+IGNORE=		is restricted: ${RESTRICTED}
+.elif defined(BROKEN)
+.if !defined(TRYBROKEN)
+IGNORE=		is marked as broken: ${BROKEN}
+.endif
+.elif defined(BROKEN_${ARCH})
+.if !defined(TRYBROKEN)
+IGNORE=		is marked as broken on ${ARCH}: ${BROKEN_${ARCH}}
+.endif
+.elif defined(FORBIDDEN)
+IGNORE=		is forbidden: ${FORBIDDEN}
+.endif
+
+# Define the text to be output to LEGAL
+.if defined(LEGAL_TEXT)
+LEGAL= ${LEGAL_TEXT}
+.elif defined(RESTRICTED)
+LEGAL= ${RESTRICTED}
+.elif defined(NO_CDROM)
+LEGAL= ${NO_CDROM}
+.elif defined(NO_PACKAGE) && ! defined(LEGAL_PACKAGE)
+LEGAL= ${NO_PACKAGE}
+.endif
+
+.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING))
+IGNORE=		has to be built manually: ${MANUAL_PACKAGE_BUILD}
+clean:
+	@${IGNORECMD}
+.endif
+
+.if defined(IGNORE)
+.if defined(IGNORE_SILENT)
+IGNORECMD=	${DO_NADA}
+.else
+IGNORECMD=	${ECHO_MSG} "===>  ${PKGNAME} "${IGNORE:Q}.;exit 1
+.endif
+
+.if !defined(NO_STAGE)
+_TARGETS=	check-sanity fetch checksum extract patch configure all build stage restage install reinstall package
+.else
+_TARGETS=	check-sanity fetch checksum extract patch configure all build install reinstall package
+.endif
+.for target in ${_TARGETS}
+.if !target(${target})
+${target}:
+	@${IGNORECMD}
+.if defined(INSTALLS_DEPENDS)
+	@${FALSE}
+.endif
+.endif
+.endfor
+
+.endif
+
+.endif
+
+.if defined(IGNORE) || defined(NO_PACKAGE)
+ignorelist: package-name
+.else
+ignorelist:
+	@${DO_NADA}
+.endif
+
+.if defined(IGNORE) || defined(NO_PACKAGE)
+ignorelist-verbose:
+.if defined(IGNORE)
+	@${ECHO_CMD} "${PKGNAME}|IGNORE: "${IGNORE:Q}
+.else
+	@${ECHO_CMD} "${PKGNAME}|NO_PACKAGE: "${NO_PACKAGE:Q}
+.endif
+.else
+ignorelist-verbose:
+	@${DO_NADA}
+.endif
+
+################################################################
+# Clean directories for ftp or CDROM.
+################################################################
+
+.if !defined(LICENSE)
+
+.if defined(RESTRICTED)
+clean-restricted:	delete-distfiles delete-package
+clean-restricted-list: delete-distfiles-list delete-package-list
+RESTRICTED_FILES?=	${_DISTFILES} ${_PATCHFILES}
+.else
+clean-restricted:
+clean-restricted-list:
+.endif
+
+.if defined(NO_CDROM)
+clean-for-cdrom:	delete-distfiles delete-package
+clean-for-cdrom-list:	delete-distfiles-list delete-package-list
+RESTRICTED_FILES?=	${_DISTFILES} ${_PATCHFILES}
+.else
+clean-for-cdrom:
+clean-for-cdrom-list:
+.endif
+
+.endif # !defined(LICENSE)
+
+.if defined(ALL_HOOK)
+all:
+	@cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \
+	  DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \
+	  PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \
+	  FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \
+	  BUILD_DEPENDS="${BUILD_DEPENDS}" RUN_DEPENDS="${RUN_DEPENDS}" \
+	  CONFLICTS="${CONFLICTS}" \
+	${ALL_HOOK}
+.endif
+
+.if !target(all)
+all: build
+.endif
+
+.if !defined(DEPENDS_TARGET)
+.if defined(DEPENDS_PRECLEAN)
+DEPENDS_TARGET=	clean
+DEPENDS_ARGS=	NOCLEANDEPENDS=yes
+.endif
+.if make(reinstall)
+DEPENDS_TARGET+=	reinstall
+.else
+DEPENDS_TARGET+=	install
+.endif
+.if defined(DEPENDS_CLEAN)
+DEPENDS_TARGET+=	clean
+DEPENDS_ARGS+=	NOCLEANDEPENDS=yes
+.endif
+.endif
+
+################################################################
+#
+# Do preliminary work to detect if we need to run the config
+# target or not.
+#
+################################################################
+.if ((!defined(OPTIONS_DEFINE) && !defined(OPTIONS_SINGLE) && !defined(OPTIONS_MULTI)) \
+	&& !defined(OPTIONS_GROUP) && !defined(OPTIONS_RADIO) \
+	|| defined(CONFIG_DONE_${UNIQUENAME:U}) || \
+	defined(PACKAGE_BUILDING) || defined(BATCH))
+_OPTIONS_OK=yes
+.endif
+
+################################################################
+# The following are used to create easy dummy targets for
+# disabling some bit of default target behavior you don't want.
+# They still check to see if the target exists, and if so don't
+# do anything, since you might want to set this globally for a
+# group of ports in a Makefile.inc, but still be able to
+# override from an individual Makefile.
+################################################################
+
+# Disable checksum
+.if defined(NO_CHECKSUM) && !target(checksum)
+checksum: fetch
+	@${DO_NADA}
+.endif
+
+# Disable build
+.if defined(NO_BUILD) && !target(build)
+build: configure
+	@${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE}
+.endif
+
+# Disable install
+.if defined(NO_INSTALL) && !target(do-install)
+do-install:
+	@${DO_NADA}
+.endif
+
+# Disable package
+.if defined(NO_PACKAGE) && !target(package)
+package:
+.if defined(IGNORE_SILENT)
+	@${DO_NADA}
+.else
+	@${ECHO_MSG} "===>  ${PKGNAME} may not be packaged: "${NO_PACKAGE:Q}.
+.endif
+.endif
+
+# Disable describe
+.if defined(NO_DESCRIBE) && !target(describe)
+describe:
+	@${DO_NADA}
+.endif
+
+################################################################
+# More standard targets start here.
+#
+# These are the body of the build/install framework.  If you are
+# not happy with the default actions, and you can't solve it by
+# adding pre-* or post-* targets/scripts, override these.
+################################################################
+
+# Pre-everything
+
+pre-everything::
+	@${DO_NADA}
+
+.if defined(TRYBROKEN) && defined(BROKEN)
+buildanyway-message:
+	@${ECHO_MSG} "Trying build of ${PKGNAME} even though it is marked BROKEN."
+.endif
+
+options-message:
+.if defined(GNOME_OPTION_MSG) && (!defined(PACKAGE_BUILDING) || !defined(BATCH))
+	@for m in ${GNOME_OPTION_MSG}; do \
+		${ECHO_MSG} $$m; \
+	done
+.else
+	@${DO_NADA}
+.endif
+.if defined(_OPTIONS_READ)
+	@${ECHO_MSG} "===>  Found saved configuration for ${_OPTIONS_READ}"
+.endif
+
+
+# Warn user about deprecated packages.  Advisory only.
+
+.if !target(check-deprecated)
+check-deprecated:
+.if defined(DEPRECATED)
+	@${ECHO_MSG} "===>   NOTICE:"
+	@${ECHO_MSG}
+	@${ECHO_MSG} "This port is deprecated; you may wish to reconsider installing it:"
+	@${ECHO_MSG}
+	@${ECHO_MSG} ${DEPRECATED:Q}.
+	@${ECHO_MSG}
+.if defined(EXPIRATION_DATE)
+	@${ECHO_MSG} "It is scheduled to be removed on or after ${EXPIRATION_DATE}."
+	@${ECHO_MSG}
+.endif
+.endif
+.endif
+
+# Check if the port is listed in the vulnerability database
+
+.if defined(WITH_PKGNG)
+AUDITFILE?=		${PKG_DBDIR}/vuln.xml
+_EXTRACT_AUDITFILE=	${CAT} "${AUDITFILE}"
+.else
+AUDITFILE?=		/var/db/portaudit/auditfile.tbz
+_EXTRACT_AUDITFILE=	${TAR} -jxOf "${AUDITFILE}" auditfile
+.endif
+
+check-vulnerable:
+.if !defined(DISABLE_VULNERABILITIES) && !defined(PACKAGE_BUILDING)
+	@if [ -f "${AUDITFILE}" ]; then \
+		if [ -n "${WITH_PKGNG}" ]; then \
+			if [ -x "${PKG_BIN}" ]; then \
+				vlist=`${PKG_BIN} audit "${PKGNAME}"`; \
+			elif [ "${PORTNAME}" = "pkg" ]; then \
+				vlist=""; \
+			else \
+				${ECHO_MSG} "===> Unable to check vuln database as pkg(8) is missing"; \
+				exit 1; \
+			fi; \
+		elif [ -x "${LOCALBASE}/sbin/portaudit" ]; then \
+			vlist=`${LOCALBASE}/sbin/portaudit -X 14 "${PKGNAME}" \
+				2>&1 | grep -vE '^[0-9]+ problem\(s\) found.' \
+				|| true`; \
+			if [ -n "$$vlist" ]; then \
+				vlist=`${LOCALBASE}/sbin/portaudit -X 14 "${PKGNAME}" \
+					2>&1 | grep -vE '^[0-9]+ problem\(s\) found.' \
+					|| true`; \
+			fi ; \
+		else \
+			${ECHO_MSG} "===>  portaudit database exists, however, portaudit is not installed!"; \
+		fi; \
+		if [ -n "$$vlist" ]; then \
+			${ECHO_MSG} "===>  ${PKGNAME} has known vulnerabilities:"; \
+			${ECHO_MSG} "$$vlist"; \
+			${ECHO_MSG} "=> Please update your ports tree and try again."; \
+			exit 1; \
+		fi; \
+	fi
+.endif
+
+# set alg to any of SIZE, SHA256 (or any other checksum algorithm):
+DISTINFO_DATA?=	if [ \( -n "${DISABLE_SIZE}" -a -n "${NO_CHECKSUM}" \) -o ! -f "${DISTINFO_FILE}" ]; then exit; fi; \
+	DIR=${DIST_SUBDIR}; ${AWK} -v alg=$$alg -v file=$${DIR:+$$DIR/}$${file}	\
+		'$$1 == alg && $$2 == "(" file ")" {print $$4}' ${DISTINFO_FILE}
+
+# Fetch
+
+.if !target(do-fetch)
+do-fetch:
+	@${MKDIR} ${_DISTDIR}
+	@cd ${_DISTDIR};\
+	${_MASTER_SITES_ENV} ; \
+	for _file in ${DISTFILES}; do \
+		file=$${_file%%:*}; \
+		if [ $$_file = $$file ]; then	\
+			select='';	\
+		else	\
+			select=`${ECHO_CMD} $${_file##*:} | ${SED} -e 's/,/ /g'` ;	\
+		fi;	\
+		force_fetch=false; \
+		filebasename=$${file##*/}; \
+		for afile in ${FORCE_FETCH}; do \
+			afile=$${afile##*/}; \
+			if [ "x$$afile" = "x$$filebasename" ]; then \
+				force_fetch=true; \
+			fi; \
+		done; \
+		if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \
+			if [ -L $$file -o -L $$filebasename ]; then \
+				${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \
+				${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
+				${ECHO_MSG} "=> Please correct this problem and try again."; \
+				exit 1; \
+			fi; \
+			if [ -f ${DISTINFO_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \
+				_sha256sum=`alg=SHA256; ${DISTINFO_DATA}`; \
+				if [ -z "$$_sha256sum" ]; then \
+					${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is not in ${DISTINFO_FILE}."; \
+					${ECHO_MSG} "=> Either ${DISTINFO_FILE} is out of date, or"; \
+					${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is spelled incorrectly."; \
+					exit 1; \
+				fi; \
+			fi; \
+			${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \
+			if [ ! -w ${DISTDIR} ]; then \
+			   ${ECHO_MSG} "=> ${DISTDIR} is not writable by you; cannot fetch."; \
+			   exit 1; \
+			fi; \
+			if [ ! -z "$$select" ] ; then \
+				__MASTER_SITES_TMP= ; \
+				for group in $$select; do \
+					if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
+						eval ___MASTER_SITES_TMP="\$${_MASTER_SITES_$${group}}" ; \
+						__MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
+					fi; \
+				done; \
+				___MASTER_SITES_TMP= ; \
+				SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+			else \
+				SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
+			fi; \
+			sites_remaining=0; \
+			sites="`eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`"; \
+			for site in $${sites}; do \
+				sites_remaining=$$(($${sites_remaining} + 1)); \
+			done; \
+			for site in $${sites}; do \
+				sites_remaining=$$(($${sites_remaining} - 1)); \
+			    ${ECHO_MSG} "=> Attempting to fetch $${site}$${file}"; \
+				CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
+				case $${file} in \
+				*/*)	${MKDIR} $${file%/*}; \
+						args="-o $${file} $${site}$${file}";; \
+				*)		args=$${site}$${file};; \
+				esac; \
+				if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \
+					actual_size=`stat -f %z "$${file}"`; \
+					if [ -n "${DISABLE_SIZE}" ] || [ -z "$${CKSIZE}" ] || [ $${actual_size} -eq $${CKSIZE} ]; then \
+						continue 2; \
+					else \
+						${ECHO_MSG} "=> Fetched file size mismatch (expected $${CKSIZE}, actual $${actual_size})"; \
+						if [ $${sites_remaining} -gt 1 ]; then \
+							${ECHO_MSG} "=> Trying next site"; \
+							${RM} -f $${file}; \
+						fi; \
+					fi; \
+				fi; \
+			done; \
+			${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\
+			${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \
+			exit 1; \
+	    fi; \
+	 done
+.if defined(PATCHFILES)
+	@cd ${_DISTDIR};\
+	${_PATCH_SITES_ENV} ; \
+	for _file in ${PATCHFILES}; do \
+		file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^-:][^:]*$$//'` ; \
+		select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
+		file=`${ECHO_CMD} $$file | ${SED} -E -e 's/:-[^:]+$$//'` ; \
+		force_fetch=false; \
+		filebasename=$${file##*/}; \
+		for afile in ${FORCE_FETCH}; do \
+			afile=$${afile##*/}; \
+			if [ "x$$afile" = "x$$filebasename" ]; then \
+				force_fetch=true; \
+			fi; \
+		done; \
+		if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \
+			if [ -L $$file -o -L $${file##*/} ]; then \
+				${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \
+				${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \
+				${ECHO_MSG} "=> Please correct this problem and try again."; \
+				exit 1; \
+			fi; \
+			${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \
+			if [ ! -z "$$select" ] ; then \
+				__PATCH_SITES_TMP= ; \
+				for group in $$select; do \
+					if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
+						eval ___PATCH_SITES_TMP="\$${_PATCH_SITES_$${group}}" ; \
+						__PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
+					fi; \
+				done; \
+				___PATCH_SITES_TMP= ; \
+				SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+			else \
+				SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
+			fi; \
+			sites_remaining=0; \
+			sites="`eval $$SORTED_PATCH_SITES_CMD_TMP`"; \
+			for site in $${sites}; do \
+				sites_remaining=$$(($${sites_remaining} + 1)); \
+			done; \
+			for site in $${sites}; do \
+				sites_remaining=$$(($${sites_remaining} - 1)); \
+			    ${ECHO_MSG} "=> Attempting to fetch $${site}$${file}"; \
+				CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
+				case $${file} in \
+				*/*)	${MKDIR} $${file%/*}; \
+						args="-o $${file} $${site}$${file}";; \
+				*)		args=$${site}$${file};; \
+				esac; \
+				if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \
+					actual_size=`stat -f %z "$${file}"`; \
+					if [ -n "${DISABLE_SIZE}" ] || [ -z "$${CKSIZE}" ] || [ $${actual_size} -eq $${CKSIZE} ]; then \
+						continue 2; \
+					else \
+						${ECHO_MSG} "=> Fetched file size mismatch (expected $${CKSIZE}, actual $${actual_size})"; \
+						if [ $${sites_remaining} -gt 1 ]; then \
+							${ECHO_MSG} "=> Trying next site"; \
+							${RM} -f $${file}; \
+						fi; \
+					fi; \
+				fi; \
+			done; \
+			${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\
+			${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \
+			exit 1; \
+		fi; \
+	 done
+.endif
+.endif
+
+# Extract
+
+.if !target(do-extract)
+do-extract:
+	@${RM} -rf ${WRKDIR}
+	@${MKDIR} ${WRKDIR}
+	@for file in ${EXTRACT_ONLY}; do \
+		if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\
+		then \
+			exit 1; \
+		fi; \
+	done
+.if !defined(EXTRACT_PRESERVE_OWNERSHIP)
+	@if [ ${UID} = 0 ]; then \
+		${CHMOD} -R ug-s ${WRKDIR}; \
+		${CHOWN} -R 0:0 ${WRKDIR}; \
+	fi
+.endif
+.endif
+
+# Patch
+
+.if !target(do-patch)
+do-patch:
+.if defined(PATCHFILES)
+	@${ECHO_MSG} "===>  Applying distribution patches for ${PKGNAME}"
+	@(set -e; \
+	cd ${_DISTDIR}; \
+	patch_dist_strip () { \
+		case "$$1" in \
+		${_PATCH_DIST_STRIP_CASES} \
+		esac; \
+	}; \
+	for i in ${_PATCHFILES}; do \
+		if [ ${PATCH_DEBUG_TMP} = yes ]; then \
+			${ECHO_MSG} "===>   Applying distribution patch $$i" ; \
+		fi ; \
+		case $$i in \
+		*.Z|*.gz) ${GZCAT} $$i ;; \
+		*.bz2) ${BZCAT} $$i ;; \
+		*.xz) ${XZCAT} $$i ;; \
+		*) ${CAT} $$i ;; \
+		esac | ${PATCH} ${PATCH_DIST_ARGS} `patch_dist_strip $$i` ; \
+	done )
+.endif
+.if defined(EXTRA_PATCHES)
+	@set -e ; \
+	for i in ${EXTRA_PATCHES}; do \
+		${ECHO_MSG} "===>  Applying extra patch $$i" ; \
+		case $$i in \
+		*.Z|*.gz) ${GZCAT} $$i ;; \
+		*.bz2) ${BZCAT} $$i ;; \
+		*.xz) ${XZCAT} $$i ;; \
+		*) ${CAT} $$i ;; \
+		esac | ${PATCH} ${PATCH_ARGS} ; \
+	done
+.endif
+	@set -e ;\
+	if [ -d ${PATCHDIR} ]; then \
+		if [ "`${ECHO_CMD} ${PATCHDIR}/patch-*`" != "${PATCHDIR}/patch-*" ]; then \
+			${ECHO_MSG} "===>  Applying ${OPSYS} patches for ${PKGNAME}" ; \
+			PATCHES_APPLIED="" ; \
+			for i in ${PATCHDIR}/patch-*; do \
+				case $$i in \
+					*.orig|*.rej|*~|*,v) \
+						${ECHO_MSG} "===>   Ignoring patchfile $$i" ; \
+						;; \
+					*) \
+						if [ ${PATCH_DEBUG_TMP} = yes ]; then \
+							${ECHO_MSG} "===>   Applying ${OPSYS} patch $$i" ; \
+						fi; \
+						if ${PATCH} ${PATCH_ARGS} < $$i ; then \
+							PATCHES_APPLIED="$$PATCHES_APPLIED $$i" ; \
+						else \
+							${ECHO_MSG} `${ECHO_CMD} "=> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \
+							if [ x"$$PATCHES_APPLIED" != x"" -a ${PATCH_SILENT} != "yes" ]; then \
+								${ECHO_MSG} `${ECHO_CMD} "=> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \
+							fi; \
+							${FALSE} ; \
+						fi; \
+						;; \
+				esac; \
+			done; \
+		fi; \
+	fi
+.endif
+
+.if !target(run-autotools-fixup)
+run-autotools-fixup:
+# Work around an issue where FreeBSD 10.0 is detected as FreeBSD 1.x.
+.if ${OSVERSION} >= 1000000 && !defined(WITHOUT_FBSD10_FIX)
+	-@for f in `${FIND} ${WRKDIR} -type f \( -name config.libpath -o \
+		-name config.rpath -o -name configure -o -name libtool.m4 -o \
+		-name ltconfig -o -name libtool -o -name aclocal.m4 -o \
+		-name acinclude.m4 \)` ; do \
+			${SED} -i.fbsd10bak \
+				-e 's|freebsd1\*)|freebsd1.\*)|g' \
+				-e 's|freebsd\[12\]\*)|freebsd[12].*)|g' \
+				-e 's|freebsd\[123\]\*)|freebsd[123].*)|g' \
+				-e 's|freebsd\[\[12\]\]\*)|freebsd[[12]].*)|g' \
+				-e 's|freebsd\[\[123\]\]\*)|freebsd[[123]].*)|g' \
+					$${f} ; \
+			${TOUCH} ${TOUCH_FLAGS} -mr $${f}.fbsd10bak $${f} ; \
+			${RM} -f $${f}.fbsd10bak ; \
+			${ECHO_MSG} "===>   FreeBSD 10 autotools fix applied to $${f}"; \
+		done
+.endif
+.endif
+
+# Configure
+
+.if !target(do-configure)
+do-configure:
+	@if [ -f ${SCRIPTDIR}/configure ]; then \
+		cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
+		  ${SCRIPTDIR}/configure; \
+	fi
+.if defined(GNU_CONFIGURE)
+	@CONFIG_GUESS_DIRS=$$(${FIND} ${WRKDIR} -name config.guess -o -name config.sub \
+		| ${XARGS} -n 1 ${DIRNAME}); \
+	for _D in $${CONFIG_GUESS_DIRS}; do \
+		${CP} -f ${TEMPLATES}/config.guess $${_D}/config.guess; \
+		${CHMOD} a+rx $${_D}/config.guess; \
+	    ${CP} -f ${TEMPLATES}/config.sub $${_D}/config.sub; \
+		${CHMOD} a+rx $${_D}/config.sub; \
+	done
+.endif
+.if defined(HAS_CONFIGURE)
+	@(cd ${CONFIGURE_WRKSRC} && \
+	    ${SET_LATE_CONFIGURE_ARGS} \
+		if ! ${SETENV} CC="${CC}" CPP="${CPP}" CXX="${CXX}" \
+	    CFLAGS="${CFLAGS}" CPPFLAGS="${CPPFLAGS}" CXXFLAGS="${CXXFLAGS}" \
+	    LDFLAGS="${LDFLAGS}" \
+	    INSTALL="/usr/bin/install -c ${_BINOWNGRP}" \
+	    INSTALL_DATA="${INSTALL_DATA}" \
+	    INSTALL_LIB="${INSTALL_LIB}" \
+	    INSTALL_PROGRAM="${INSTALL_PROGRAM}" \
+	    INSTALL_SCRIPT="${INSTALL_SCRIPT}" \
+	    ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}; then \
+			 ${ECHO_MSG} "===>  Script \"${CONFIGURE_SCRIPT}\" failed unexpectedly."; \
+			 (${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT} 75 79 ; \
+			 ${FALSE}; \
+		fi)
+.endif
+.endif
+
+# Build
+# XXX: ${MAKE_ARGS:N${DESTDIRNAME}=*} would be easier but it is not valid with the old fmake
+.if !target(do-build)
+do-build:
+	@(cd ${BUILD_WRKSRC}; if ! ${SETENV} ${MAKE_ENV} ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${_MAKE_JOBS} ${MAKE_ARGS:C,^${DESTDIRNAME}=.*,,g} ${ALL_TARGET}; then \
+		if [ -n "${BUILD_FAIL_MESSAGE}" ] ; then \
+			${ECHO_MSG} "===> Compilation failed unexpectedly."; \
+			(${ECHO_CMD} "${BUILD_FAIL_MESSAGE}") | ${FMT} 75 79 ; \
+			fi; \
+		${FALSE}; \
+		fi)
+.endif
+
+# Check conflicts
+
+.if !target(check-conflicts)
+check-conflicts: check-build-conflicts check-install-conflicts
+.endif
+
+.if !target(check-build-conflicts)
+check-build-conflicts:
+.if ( defined(CONFLICTS) || defined(CONFLICTS_BUILD) ) && !defined(DISABLE_CONFLICTS) && !defined(DEFER_CONFLICTS_CHECK)
+	@found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
+	conflicts_with=; \
+	for entry in $${found}; do \
+		if ${PKG_INFO} -e $${entry} ; then \
+			prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
+			orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
+			if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
+				conflicts_with="$${conflicts_with} $${entry}"; \
+			fi; \
+		fi; \
+	done; \
+	if [ -n "$${conflicts_with}" ]; then \
+		${ECHO_MSG}; \
+		${ECHO_MSG} "===>  ${PKGNAME} conflicts with installed package(s): "; \
+		for entry in $${conflicts_with}; do \
+			${ECHO_MSG} "      $${entry}"; \
+		done; \
+		${ECHO_MSG}; \
+		${ECHO_MSG} "      They will not build together."; \
+		${ECHO_MSG} "      Please remove them first with pkg_delete(1)."; \
+		exit 1; \
+	fi
+.endif
+.endif
+
+.if !target(identify-install-conflicts)
+identify-install-conflicts:
+.if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) ) && !defined(DISABLE_CONFLICTS)
+	@found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
+	conflicts_with=; \
+	for entry in $${found}; do \
+		if ${PKG_INFO} -e $${entry} ; then \
+			prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
+			orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
+			if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
+				conflicts_with="$${conflicts_with} $${entry}"; \
+			fi; \
+		fi; \
+	done; \
+	if [ -n "$${conflicts_with}" ]; then \
+		${ECHO_MSG}; \
+		${ECHO_MSG} "===>  ${PKGNAME} conflicts with installed package(s): "; \
+		for entry in $${conflicts_with}; do \
+			${ECHO_MSG} "      $${entry}"; \
+		done; \
+		${ECHO_MSG}; \
+		${ECHO_MSG} "      They install files into the same place."; \
+		${ECHO_MSG} "      You may want to stop build with Ctrl + C."; \
+		sleep 10; \
+	fi
+.endif
+.endif
+
+.if !target(check-install-conflicts)
+check-install-conflicts:
+.if ( defined(CONFLICTS) || defined(CONFLICTS_INSTALL) || ( defined(CONFLICTS_BUILD) && defined(DEFER_CONFLICTS_CHECK) ) ) && !defined(DISABLE_CONFLICTS) 
+.if defined(DEFER_CONFLICTS_CHECK)
+	@found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_BUILD:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
+	conflicts_with=; \
+	for entry in $${found}; do \
+		if ${PKG_INFO} -e $${entry} ; then \
+			prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
+			orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
+			if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
+				conflicts_with="$${conflicts_with} $${entry}"; \
+			fi; \
+		fi; \
+	done; \
+	if [ -n "$${conflicts_with}" ]; then \
+		${ECHO_MSG}; \
+		${ECHO_MSG} "===>  ${PKGNAME} conflicts with installed package(s): "; \
+		for entry in $${conflicts_with}; do \
+			${ECHO_MSG} "      $${entry}"; \
+		done; \
+		${ECHO_MSG}; \
+		${ECHO_MSG} "      Please remove them first with pkg_delete(1)."; \
+		exit 1; \
+	fi
+.else
+	@found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} ${CONFLICTS_INSTALL:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \
+	conflicts_with=; \
+	for entry in $${found}; do \
+		if ${PKG_INFO} -e $${entry} ; then \
+			prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \
+			orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \
+			if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \
+				conflicts_with="$${conflicts_with} $${entry}"; \
+			fi; \
+		fi; \
+	done; \
+	if [ -n "$${conflicts_with}" ]; then \
+		${ECHO_MSG}; \
+		${ECHO_MSG} "===>  ${PKGNAME} conflicts with installed package(s): "; \
+		for entry in $${conflicts_with}; do \
+			${ECHO_MSG} "      $${entry}"; \
+		done; \
+		${ECHO_MSG}; \
+		${ECHO_MSG} "      They install files into the same place."; \
+		${ECHO_MSG} "      Please remove them first with pkg_delete(1)."; \
+		exit 1; \
+	fi
+.endif # defined(DEFER_CONFLICTS_CHECK)
+.endif
+.endif
+
+# Install
+
+.if !target(do-install)
+do-install:
+	@(cd ${INSTALL_WRKSRC} && ${SETENV} ${MAKE_ENV} ${MAKE_CMD} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET})
+.endif
+
+# Package
+
+.if !target(do-package)
+do-package: ${TMPPLIST}
+	@if [ -d ${PACKAGES} ]; then \
+		if [ ! -d ${PKGREPOSITORY} ]; then \
+			if ! ${MKDIR} ${PKGREPOSITORY}; then \
+				${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \
+				exit 1; \
+			fi; \
+		fi; \
+	fi
+.if defined(NO_STAGE)
+	@if ${PKG_CMD} -b ${PKGNAME} ${PKGFILE}; then \
+		if [ -d ${PACKAGES} ]; then \
+			cd ${.CURDIR} && eval ${MAKE} package-links; \
+		fi; \
+	else \
+		cd ${.CURDIR} && eval ${MAKE} delete-package; \
+		exit 1; \
+	fi
+.else
+	@_LATE_PKG_ARGS=""; \
+	if [ -f ${PKGINSTALL} ]; then \
+		_LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -i ${PKGINSTALL}"; \
+	fi; \
+	if [ -f ${PKGDEINSTALL} ]; then \
+		_LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -k ${PKGDEINSTALL}"; \
+	fi; \
+	if [ -f ${PKGREQ} ]; then \
+		_LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -r ${PKGREQ}"; \
+	fi; \
+	if [ -f ${PKGMESSAGE} ]; then \
+		_LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -D ${PKGMESSAGE}"; \
+	fi; \
+	if ${PKG_CMD} -S ${STAGEDIR} ${PKG_ARGS} ${WRKDIR}/${PKGNAME}${PKG_SUFX}; then \
+		if [ -d ${PACKAGES} -a -w ${PACKAGES} ]; then \
+			${LN} -f ${WRKDIR}/${PKGNAME}${PKG_SUFX} ${PKGFILE} 2>/dev/null || \
+			    ${CP} -af ${WRKDIR}/${PKGNAME}${PKG_SUFX} ${PKGFILE}; \
+			cd ${.CURDIR} && eval ${MAKE} package-links; \
+		fi; \
+	else \
+		cd ${.CURDIR} && eval ${MAKE} delete-package; \
+		exit 1; \
+	fi
+.endif
+.endif
+
+# Some support rules for do-package
+
+.if !target(package-links)
+package-links: delete-package-links
+	@for cat in ${CATEGORIES}; do \
+		if [ ! -d ${PACKAGES}/$$cat ]; then \
+			if ! ${MKDIR} ${PACKAGES}/$$cat; then \
+				${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \
+				exit 1; \
+			fi; \
+		fi; \
+		${LN} -sf `${ECHO_CMD} $$cat | ${SED} -e 'sa[^/]*a..ag'`/${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \
+	done
+.if !defined(NO_LATEST_LINK)
+	@if [ ! -d ${PKGLATESTREPOSITORY} ]; then \
+		if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \
+			${ECHO_MSG} "=> Can't create directory ${PKGLATESTREPOSITORY}."; \
+			exit 1; \
+		fi; \
+	fi
+	@${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PKGLATESTFILE}
+.endif
+.endif
+
+.if !target(delete-package-links)
+delete-package-links:
+	@for cat in ${CATEGORIES}; do \
+		${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
+	done
+.if !defined(NO_LATEST_LINK)
+	@${RM} -f ${PKGLATESTFILE}
+.endif
+.endif
+
+.if !target(delete-package)
+delete-package: delete-package-links
+.	if defined(NO_STAGE)
+	@${RM} -f ${PKGFILE}
+.	else
+# When staging, the package may only be in the workdir if not root
+	@${RM} -f ${PKGFILE} ${WRKDIR}/${PKGNAME}${PKG_SUFX} 2>/dev/null || :
+.	endif
+.endif
+
+.if !target(delete-package-links-list)
+delete-package-links-list:
+	@for cat in ${CATEGORIES}; do \
+		${ECHO_CMD} ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \
+	done
+.if !defined(NO_LATEST_LINK)
+	@${ECHO_CMD} ${RM} -f ${PKGLATESTFILE}
+.endif
+.endif
+
+.if !target(delete-package-list)
+delete-package-list: delete-package-links-list
+	@${ECHO_CMD} "[ -f ${PKGFILE} ] && (${ECHO_CMD} deleting ${PKGFILE}; ${RM} -f ${PKGFILE})"
+.endif
+
+# Only used if !defined(NO_STAGE)
+.if !target(install-package)
+install-package:
+.if defined(FORCE_PKG_REGISTER)
+	@${PKG_ADD} -f ${WRKDIR}/${PKGNAME}${PKG_SUFX}
+.else
+	@${PKG_ADD} ${WRKDIR}/${PKGNAME}${PKG_SUFX}
+.endif
+.endif
+
+
+# Utility targets follow
+
+.if !target(check-already-installed)
+.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER)
+check-already-installed: ${TMPPLIST_SORT}
+		@${ECHO_MSG} "===>  Checking if ${PKGORIGIN} already installed"; \
+		${MKDIR} ${PKG_DBDIR}; \
+		already_installed=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
+		if [ -n "$${already_installed}" ]; then \
+				for p in $${already_installed}; do \
+						prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \
+						if [ "x${PREFIX}" = "x$${prfx}" ]; then \
+								df=`${PKG_INFO} -q -f $${p} 2> /dev/null | ${GREP} -v "^@" | ${SORT} -u | ${COMM} -12 - ${TMPPLIST_SORT}`; \
+								if [ -n "$${df}" ]; then \
+										found_package=$${p}; \
+										break; \
+								fi; \
+						fi; \
+				done; \
+		fi; \
+		if [ -d ${PKG_DBDIR}/${PKGNAME} -o -n "$${found_package}" ]; then \
+				if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \
+					${ECHO_CMD} "===>   ${PKGNAME} is already installed"; \
+				else \
+					${ECHO_CMD} "===>   An older version of ${PKGORIGIN} is already installed ($${found_package})"; \
+				fi; \
+				${ECHO_MSG} "      You may wish to \`\`make deinstall'' and install this port again"; \
+				${ECHO_MSG} "      by \`\`make reinstall'' to upgrade it properly."; \
+				${ECHO_MSG} "      If you really wish to overwrite the old port of ${PKGORIGIN}"; \
+				${ECHO_MSG} "      without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \
+				${ECHO_MSG} "      in your environment or the \"make install\" command line."; \
+				exit 1; \
+		fi
+.endif
+.endif
+
+.if !target(check-umask)
+check-umask:
+	@if [ `${SH} -c umask` != 0022 ]; then \
+		${ECHO_MSG} "===>  Warning: your umask is \"`${SH} -c umask`"\".; \
+		${ECHO_MSG} "      If this is not desired, set it to an appropriate value"; \
+		${ECHO_MSG} "      and install this port again by \`\`make reinstall''."; \
+	fi
+.endif
+
+.if !target(install-mtree)
+install-mtree:
+	@${MKDIR} ${PREFIX}
+	@if [ ${UID} != 0 ]; then \
+		if [ -w ${PREFIX}/ ]; then \
+			${ECHO_MSG} "Warning: not superuser, you may get some errors during installation."; \
+		else \
+			${ECHO_MSG} "Error: ${PREFIX}/ not writable."; \
+			${FALSE}; \
+		fi; \
+	fi
+.if !defined(NO_MTREE)
+	@if [ ${UID} = 0 ]; then \
+		if [ ! -f ${MTREE_FILE} ]; then \
+			${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \
+			${ECHO_MSG} "Copy it from a suitable location (e.g., ${SRC_BASE}/etc/mtree) and try again."; \
+			exit 1; \
+		else \
+			${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \
+			if [ ${PREFIX} = ${LOCALBASE} -a "${MTREE_FILE_DEFAULT}" = "yes" ]; then \
+				cd ${PREFIX}/share/nls; \
+				for link in POSIX en_US.US-ASCII; \
+				do \
+					if [ x"`${READLINK_CMD} $${link}`" != x"C" ]; \
+					then \
+						${LN} -shf C $${link}; \
+					fi; \
+				done; \
+			fi; \
+		fi; \
+	else \
+		${ECHO_MSG} "Warning: not superuser, can't run mtree."; \
+		${ECHO_MSG} "You may want to become root and try again to ensure correct permissions."; \
+	fi
+.endif
+.endif
+
+.if !target(install-ldconfig-file)
+install-ldconfig-file:
+.if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32)
+.if defined(USE_LDCONFIG)
+.if defined(USE_LINUX_PREFIX)
+.if defined(NO_STAGE)
+	@${ECHO_MSG} "===>   Running linux ldconfig"
+	${LDCONFIG_CMD}
+.endif
+.else
+.if defined(NO_STAGE)
+.if !defined(INSTALL_AS_USER)
+	@${ECHO_MSG} "===>   Running ldconfig"
+	${LDCONFIG} -m ${USE_LDCONFIG}
+.else
+	@${ECHO_MSG} "===>   Running ldconfig (errors are ignored)"
+	-${LDCONFIG} -m ${USE_LDCONFIG}
+.endif
+.endif
+.if ${USE_LDCONFIG} != "${PREFIX}/lib" && !defined(INSTALL_AS_USER)
+	@${ECHO_MSG} "===>   Installing ldconfig configuration file"
+.if defined(NO_LDCONFIG_MTREE)
+	@${MKDIR} ${STAGEDIR}${PREFIX}/${LDCONFIG_DIR}
+.endif
+	@${ECHO_CMD} ${USE_LDCONFIG} | ${TR} ' ' '\n' \
+		> ${STAGEDIR}${PREFIX}/${LDCONFIG_DIR}/${UNIQUENAME}
+	@${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
+	@${ECHO_CMD} ${LDCONFIG_DIR}/${UNIQUENAME} >> ${TMPPLIST}
+.if defined(NO_LDCONFIG_MTREE)
+	@${ECHO_CMD} "@unexec rmdir ${LDCONFIG_DIR} >/dev/null 2>&1 || true" >> ${TMPPLIST}
+.endif
+.endif
+.endif
+.endif
+.if defined(USE_LDCONFIG32)
+.if defined(NO_STAGE)
+.if !defined(INSTALL_AS_USER)
+	@${ECHO_MSG} "===>   Running ldconfig"
+	${LDCONFIG} -32 -m ${USE_LDCONFIG32}
+.else
+	@${ECHO_MSG} "===>   Running ldconfig (errors are ignored)"
+	-${LDCONFIG} -32 -m ${USE_LDCONFIG32}
+.endif
+.endif
+.if !defined(INSTALL_AS_USER)
+	@${ECHO_MSG} "===>   Installing 32-bit ldconfig configuration file"
+.if defined(NO_LDCONFIG_MTREE)
+	@${MKDIR} ${STAGEDIR}${PREFIX}/${LDCONFIG_32DIR}
+.endif
+	@${ECHO_CMD} ${USE_LDCONFIG32} | ${TR} ' ' '\n' \
+		> ${STAGEDIR}${PREFIX}/${LDCONFIG32_DIR}/${UNIQUENAME}
+	@${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
+	@${ECHO_CMD} ${LDCONFIG32_DIR}/${UNIQUENAME} >> ${TMPPLIST}
+.if defined(NO_LDCONFIG_MTREE)
+	@${ECHO_CMD} "@unexec rmdir ${LDCONFIG32_DIR} >/dev/null 2>&1" >> ${TMPPLIST}
+.endif
+.endif
+.endif
+.if defined(INSTALLS_SHLIB)
+	@${ECHO_MSG} "INSTALLS_SHLIB is deprecated. Use USE_LDCONFIG instead."
+.endif
+.endif
+.endif
+
+.if !target(create-users-groups)
+.if defined(GROUPS) || defined(USERS)
+.if defined(WITH_PKGNG)
+_UG_OUTPUT=	${WRKDIR}/users-groups.sh
+PKGPREINSTALL+=	${_UG_OUTPUT}
+.else
+_UG_OUTPUT=	/dev/null
+.endif
+.endif
+.if defined(GROUPS) || defined(USERS)
+create-users-groups:
+.if defined(GROUPS)
+.for _file in ${GID_FILES}
+.if !exists(${_file})
+	@${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1
+.endif
+.endfor
+.if defined(WITH_PKGNG)
+		@${RM} -f ${_UG_OUTPUT} || ${TRUE}
+.endif
+	@${ECHO_MSG} "===> Creating users and/or groups."
+.if defined(WITH_PKGNG)
+	@${ECHO_CMD} "echo \"===> Creating users and/or groups.\"" >> ${_UG_OUTPUT}
+.else
+	@${ECHO_CMD} "@exec echo \"===> Creating users and/or groups.\"" >> ${TMPPLIST}
+.endif
+.for _group in ${GROUPS}
+# _bgpd:*:130:
+	@if ! ${GREP} -h ^${_group}: ${GID_FILES} >/dev/null 2>&1; then \
+		${ECHO_CMD} "** Cannot find any information about group \`${_group}' in ${GID_FILES}."; \
+		exit 1; \
+	fi
+	@IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \
+		gid=$$(($$gid+${GID_OFFSET})); \
+		if [ "${NO_STAGE}" = "yes" ]; then \
+		if ! ${PW} groupshow $$group >/dev/null 2>&1; then \
+			${ECHO_MSG} "Creating group \`$$group' with gid \`$$gid'."; \
+			${PW} groupadd $$group -g $$gid; \
+		else \
+			${ECHO_MSG} "Using existing group \`$$group'."; \
+		fi; \
+		fi ; \
+		if [ -z "${WITH_PKGNG}" ]; then \
+				${ECHO_CMD} "@exec if ! ${PW} groupshow $$group >/dev/null 2>&1; then \
+					echo \"Creating group '$$group' with gid '$$gid'.\"; \
+					${PW} groupadd $$group -g $$gid; else echo \"Using existing group '$$group'.\"; fi" >> ${TMPPLIST}; \
+		else \
+				${ECHO_CMD} -e "if ! ${PW} groupshow $$group >/dev/null 2>&1; then \n \
+					echo \"Creating group '$$group' with gid '$$gid'.\" \n \
+					${PW} groupadd $$group -g $$gid; else echo \"Using existing group '$$group'.\"\nfi" >> ${_UG_OUTPUT}; \
+		fi ; \
+	done
+.endfor
+.endif
+.if defined(USERS)
+.for _file in ${UID_FILES}
+.if !exists(${_file})
+	@${ECHO_CMD} "** ${_file} doesn't exist. Exiting."; exit 1
+.endif
+.endfor
+.for _user in ${USERS}
+# _bgpd:*:130:130:BGP Daemon:/var/empty:/sbin/nologin
+	@if ! ${GREP} -h ^${_user}: ${UID_FILES} >/dev/null 2>&1; then \
+		${ECHO_CMD} "** Cannot find any information about user \`${_user}' in ${UID_FILES}."; \
+		exit 1; \
+	fi
+	@IFS=":"; ${GREP} -h ^${_user}: ${UID_FILES} | head -n 1 | while read login passwd uid gid class change expire gecos homedir shell; do \
+		uid=$$(($$uid+${UID_OFFSET})); \
+		gid=$$(($$gid+${GID_OFFSET})); \
+		class="$${class:+-L }$$class"; \
+		homedir=$$(echo $$homedir | sed "s|^/usr/local|${PREFIX}|"); \
+		if [ "${NO_STAGE}" = "yes" ]; then \
+		if ! ${PW} usershow $$login >/dev/null 2>&1; then \
+			${ECHO_MSG}  "Creating user \`$$login' with uid \`$$uid'."; \
+			eval ${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; \
+			case $$homedir in /nonexistent|/var/empty) ;; *) ${INSTALL} -d -g $$gid -o $$uid $$homedir;; esac; \
+		else \
+			${ECHO_MSG} "Using existing user \`$$login'."; \
+		fi; \
+		fi; \
+		if [ -z "${WITH_PKGNG}" ]; then \
+			${ECHO_CMD} "@exec if ! ${PW} usershow $$login >/dev/null 2>&1; then \
+				echo \"Creating user '$$login' with uid '$$uid'.\"; \
+				${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell; \
+				else echo \"Using existing user '$$login'.\"; fi" >> ${TMPPLIST}; \
+		else \
+			${ECHO_CMD} -e "if ! ${PW} usershow $$login >/dev/null 2>&1; then \n \
+				echo \"Creating user '$$login' with uid '$$uid'.\" \n \
+				${PW} useradd $$login -u $$uid -g $$gid $$class -c \"$$gecos\" -d $$homedir -s $$shell \n \
+				else \necho \"Using existing user '$$login'.\" \nfi" >> ${_UG_OUTPUT}; \
+		fi ; \
+		case $$homedir in /nonexistent|/var/empty) ;; *) ${ECHO_CMD} "@exec ${INSTALL} -d -g $$gid -o $$uid $$homedir" >> ${TMPPLIST};; esac; \
+	done
+.endfor
+.if defined(GROUPS)
+.for _group in ${GROUPS}
+# mail:*:6:postfix,clamav
+	@IFS=":"; ${GREP} -h ^${_group}: ${GID_FILES} | head -n 1 | while read group foo gid members; do \
+		gid=$$(($$gid+${GID_OFFSET})); \
+		IFS=","; for _login in $$members; do \
+			for _user in ${USERS}; do \
+				if [ "x$${_user}" = "x$${_login}" ]; then \
+					if [ "${NO_STAGE}" = "yes" ]; then \
+					if ! ${PW} groupshow ${_group} | ${GREP} -qw $${_login}; then \
+						${ECHO_MSG} "Adding user \`$${_login}' to group \`${_group}'."; \
+						${PW} groupmod ${_group} -m $${_login}; \
+					fi; \
+					fi; \
+					if [ -z "${WITH_PKGNG}" ]; then \
+							${ECHO_CMD} "@exec if ! ${PW} groupshow ${_group} | ${GREP} -qw $${_login}; then \
+								echo \"Adding user '$${_login}' to group '${_group}'.\"; \
+								${PW} groupmod ${_group} -m $${_login}; fi" >> ${TMPPLIST}; \
+					else \
+							${ECHO_CMD} -e "if ! ${PW} groupshow ${_group} | ${GREP} -qw $${_login}; then \n \
+								echo \"Adding user '$${_login}' to group '${_group}'.\" \n \
+								${PW} groupmod ${_group} -m $${_login} \nfi" >> ${_UG_OUTPUT}; \
+					fi ; \
+				fi; \
+			done; \
+		done; \
+	done
+.endfor
+.endif
+.if defined(USERS)
+.for _user in ${USERS}
+	@if [ ! ${USERS_BLACKLIST:M${_user}} ]; then \
+		${ECHO_CMD} "@unexec if ${PW} usershow ${_user} >/dev/null 2>&1; then \
+		echo \"==> You should manually remove the \\\"${_user}\\\" user. \"; fi" >> ${TMPPLIST}; \
+	fi
+.endfor
+.endif
+.endif
+.endif
+.endif
+
+# PR ports/152498
+# XXX Make sure the commands to create group(s)
+# and user(s) are the first in pkg-plist
+.if !target(fix-plist-sequence)
+fix-plist-sequence: ${TMPPLIST}
+.if !defined(WITH_PKGNG) && (defined(GROUPS) || defined(USERS))
+	@${ECHO_CMD} "===> Correct pkg-plist sequence to create group(s) and user(s)"
+	@${EGREP} -e '^@exec echo.*Creating users and' -e '^@exec.*${PW}' -e '^@exec ${INSTALL} -d -g' ${TMPPLIST} > ${TMPGUCMD}
+	@${EGREP} -v -e '^@exec echo.*Creating users and' -e '^@exec.*${PW}' -e '^@exec ${INSTALL} -d -g' ${TMPPLIST} >> ${TMPGUCMD}
+	@${MV} -f ${TMPGUCMD} ${TMPPLIST}
+.endif
+.if !defined(WITH_PKGNG)
+	@${ECHO_CMD} "@exec echo pkg_install EOL is scheduled for 2014-09-01. Please consider migrating to pkgng" >> ${TMPPLIST}
+	@${ECHO_CMD} "@exec echo http://blogs.freebsdish.org/portmgr/2014/02/03/time-to-bid-farewell-to-the-old-pkg_-tools/" >> ${TMPPLIST}
+.endif
+.endif
+
+.if !defined(DISABLE_SECURITY_CHECK)
+.if !target(security-check)
+security-check:
+# Scan PLIST for:
+#   1.  setugid files
+#   2.  accept()/recvfrom() which indicates network listening capability
+#   3.  insecure functions (gets/mktemp/tempnam/[XXX])
+#   4.  startup scripts, in conjunction with 2.
+#   5.  world-writable files/dirs
+#
+	-@${RM} -f ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable ${WRKDIR}/.PLIST.objdump; \
+	${AWK} -v prefix='${PREFIX}' ' \
+		match($$0, /^@cwd /) { prefix = substr($$0, RSTART + RLENGTH); if (prefix == "/") prefix=""; next; } \
+		/^@/ { next; } \
+		/^\// { print; next; } \
+		{ print prefix "/" $$0; } \
+	' ${TMPPLIST} > ${WRKDIR}/.PLIST.flattened; \
+	${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
+	| ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) 2> /dev/null > ${WRKDIR}/.PLIST.setuid; \
+	${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
+	| ${XARGS} -0 -J % ${FIND} % -prune -perm -0002 \! -type l 2> /dev/null > ${WRKDIR}/.PLIST.writable; \
+	${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \
+	| ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f -print0 2> /dev/null \
+	| ${XARGS} -0 -n 1 ${OBJDUMP} -R 2> /dev/null > ${WRKDIR}/.PLIST.objdump; \
+	if \
+		! ${AWK} -v audit="$${PORTS_AUDIT}" -f ${PORTSDIR}/Tools/scripts/security-check.awk \
+		  ${WRKDIR}/.PLIST.flattened ${WRKDIR}/.PLIST.objdump ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable; \
+	then \
+		www_site=$$(cd ${.CURDIR} && ${MAKE} www-site); \
+	    if [ ! -z "$${www_site}" ]; then \
+			${ECHO_MSG}; \
+			${ECHO_MSG} "      For more information, and contact details about the security"; \
+			${ECHO_MSG} "      status of this software, see the following webpage: "; \
+			${ECHO_MSG} "$${www_site}"; \
+		fi; \
+	fi
+.endif
+.else # i.e. defined(DISABLE_SECURITY_CHECK)
+security-check:
+	@${ECHO_MSG} "      WARNING: Security check has been disabled."
+.endif # !defined(DISABLE_SECURITY_CHECK)
+
+################################################################
+# Skeleton targets start here
+#
+# You shouldn't have to change these.  Either add the pre-* or
+# post-* targets/scripts or redefine the do-* targets.  These
+# targets don't do anything other than checking for cookies and
+# call the necessary targets/scripts.
+################################################################
+
+extract-message:
+	@${ECHO_MSG} "===>  Extracting for ${PKGNAME}"
+patch-message:
+	@${ECHO_MSG} "===>  Patching for ${PKGNAME}"
+configure-message:
+	@${ECHO_MSG} "===>  Configuring for ${PKGNAME}"
+build-message:
+	@${ECHO_MSG} "===>  Building for ${PKGNAME}"
+stage-message:
+	@${ECHO_MSG} "===>  Staging for ${PKGNAME}"
+install-message:
+	@${ECHO_MSG} "===>  Installing for ${PKGNAME}"
+package-message:
+	@${ECHO_MSG} "===>  Building package for ${PKGNAME}"
+
+# Empty pre-* and post-* targets
+
+.for stage in pre post
+.for name in pkg check-sanity fetch extract patch configure build stage install package
+
+.if exists(${SCRIPTDIR}/${stage}-${name})
+.if !target(${stage}-${name}-script)
+${stage}-${name}-script:
+	@ cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \
+			${SCRIPTDIR}/${.TARGET:S/-script$//}
+.endif
+.endif
+
+.endfor
+.endfor
+
+.if !target(pretty-print-www-site)
+pretty-print-www-site:
+	@www_site=$$(cd ${.CURDIR} && ${MAKE} www-site); \
+	if [ -n "$${www_site}" ]; then \
+		${ECHO_MSG} -n " and/or visit the "; \
+		${ECHO_MSG} -n "<a href=\"$${www_site}\">web site</a>"; \
+		${ECHO_MSG} " for further information"; \
+	fi
+.endif
+
+################################################################
+# Some more targets supplied for users' convenience
+################################################################
+
+# Checkpatch
+#
+# Special target to verify patches
+
+.if !target(checkpatch)
+checkpatch:
+	@cd ${.CURDIR} && ${MAKE} ${PATCH_SILENT} PATCH_CHECK_ONLY=yes ${_PATCH_DEP} ${_PATCH_REAL_SEQ}
+.endif
+
+# Reinstall
+#
+# Special target to re-run install
+
+.if !target(reinstall)
+reinstall:
+	@${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
+	@cd ${.CURDIR} && DEPENDS_TARGET="${DEPENDS_TARGET}" ${MAKE} -DFORCE_PKG_REGISTER install
+.endif
+
+.if !target(restage)
+restage:
+	@${RM} -rf ${STAGEDIR} ${STAGE_COOKIE} ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
+	@cd ${.CURDIR} && ${MAKE} stage
+.endif
+
+# Deinstall
+#
+# Special target to remove installation
+
+.if !target(deinstall)
+deinstall:
+.if ${UID} != 0 && !defined(INSTALL_AS_USER)
+	@${ECHO_MSG} "===>  Switching to root credentials for '${.TARGET}' target"
+	@cd ${.CURDIR} && \
+		${SU_CMD} "${MAKE} ${.TARGET}"
+	@${ECHO_MSG} "===>  Returning to user credentials"
+.else
+	@${ECHO_MSG} "===>  Deinstalling for ${PKGORIGIN}"
+	@found_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
+	for p in $${found_names}; do \
+			check_name=`${ECHO_CMD} $${p} | ${SED} -e 's/-[^-]*$$//'`; \
+			if [ "$${check_name}" = "${PKGBASE}" ]; then \
+					prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \
+					if [ "x${PREFIX}" = "x$${prfx}" ]; then \
+							${ECHO_MSG} "===>   Deinstalling $${p}"; \
+							${PKG_DELETE} -f $${p}; \
+					else \
+							${ECHO_MSG} "===>   $${p} has a different PREFIX: $${prfx}, skipping"; \
+					fi; \
+			fi; \
+	done; \
+	if [ -z "$${found_names}" ]; then \
+		${ECHO_MSG} "===>   ${PKGBASE} not installed, skipping"; \
+	fi
+	@${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
+.endif
+.endif
+
+# Deinstall-all
+#
+# Special target to remove installation of all ports of the same origin
+
+.if !target(deinstall-all)
+deinstall-all:
+.if ${UID} != 0 && !defined(INSTALL_AS_USER)
+	@${ECHO_MSG} "===>  Switching to root credentials for '${.TARGET}' target"
+	@cd ${.CURDIR} && \
+		${SU_CMD} "${MAKE} ${.TARGET}"
+	@${ECHO_MSG} "===>  Returning to user credentials"
+.else
+	@${ECHO_MSG} "===>  Deinstalling for ${PKGORIGIN}"
+	@deinstall_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \
+	for oldpkgorigin in $$(${GREP} "|${PKGORIGIN}|" ${PORTSDIR}/MOVED | ${CUT} -f 1 -d '|' | ${SORT} -u); do \
+		deinstall_names="$${deinstall_names} $$(${PKG_INFO} -q -O $${oldpkgorigin})"; \
+	done; \
+	if [ -n "$${deinstall_names}" ]; then \
+		for d in $${deinstall_names}; do \
+			${ECHO_MSG} "===>   Deinstalling $${d}"; \
+			${PKG_DELETE} -f $${d}; \
+		done; \
+	else \
+		${ECHO_MSG} "===>   ${PKGORIGIN} not installed, skipping"; \
+	fi; \
+	${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE}
+.endif
+.endif
+
+# Cleaning up
+
+.if !target(do-clean)
+do-clean:
+.if !defined(NO_STAGE) && defined(NEED_ROOT) && ${UID} != 0 && !defined(INSTALL_AS_USER) && exists(${STAGE_COOKIE})
+	@${ECHO_MSG} "===>  Switching to root credentials for '${.TARGET}' target"
+	@cd ${.CURDIR} && \
+		${SU_CMD} "${MAKE} ${.TARGET}"
+	@${ECHO_MSG} "===>  Returning to user credentials"
+.else
+	@if [ -d ${WRKDIR} ]; then \
+		if [ -w ${WRKDIR} ]; then \
+			${RM} -rf ${WRKDIR}; \
+		else \
+			${ECHO_MSG} "===>   ${WRKDIR} not writable, skipping"; \
+		fi; \
+	fi
+.endif
+.endif
+
+.if !target(clean)
+clean:
+.if !defined(NOCLEANDEPENDS)
+	@cd ${.CURDIR} && ${MAKE} limited-clean-depends
+.endif
+	@${ECHO_MSG} "===>  Cleaning for ${PKGNAME}"
+.if target(pre-clean)
+	@cd ${.CURDIR} && ${MAKE} pre-clean
+.endif
+	@cd ${.CURDIR} && ${MAKE} do-clean
+.if target(post-clean)
+	@cd ${.CURDIR} && ${MAKE} post-clean
+.endif
+.endif
+
+.if !target(pre-distclean)
+pre-distclean:
+	@${DO_NADA}
+.endif
+
+.if !target(distclean)
+distclean: pre-distclean clean
+	@cd ${.CURDIR} && ${MAKE} delete-distfiles RESTRICTED_FILES="${_DISTFILES} ${_PATCHFILES}"
+.endif
+
+.if !target(delete-distfiles)
+delete-distfiles:
+	@${ECHO_MSG} "===>  Deleting distfiles for ${PKGNAME}"
+	@(if [ "X${RESTRICTED_FILES}" != "X" -a -d ${_DISTDIR} ]; then \
+		cd ${_DISTDIR}; \
+		for file in ${RESTRICTED_FILES}; do \
+			${RM} -f $${file}; \
+			dir=$${file%/*}; \
+			if [ "$${dir}" != "$${file}" ]; then \
+				${RMDIR} -p $${dir} >/dev/null 2>&1 || :; \
+			fi; \
+		done; \
+	fi)
+.if defined(DIST_SUBDIR)
+	-@${RMDIR} ${_DISTDIR} >/dev/null 2>&1 || ${TRUE}
+.endif
+.endif
+
+.if !target(delete-distfiles-list)
+delete-distfiles-list:
+	@${ECHO_CMD} "# ${PKGNAME}"
+	@if [ "X${RESTRICTED_FILES}" != "X" ]; then \
+		for file in ${RESTRICTED_FILES}; do \
+			${ECHO_CMD} "[ -f ${_DISTDIR}/$$file ] && (${ECHO_CMD} deleting ${_DISTDIR}/$$file; ${RM} -f ${_DISTDIR}/$$file)"; \
+			dir=$${file%/*}; \
+			if [ "$${dir}" != "$${file}" ]; then \
+				${ECHO_CMD} "(cd ${_DISTDIR} && ${RMDIR} -p $${dir} 2>/dev/null)"; \
+			fi; \
+		done; \
+	fi
+.if defined(DIST_SUBDIR)
+	@${ECHO_CMD} "${RMDIR} ${_DISTDIR} 2>/dev/null || ${TRUE}"
+.endif
+.endif
+
+# Prints out a list of files to fetch (useful to do a batch fetch)
+
+.if !target(fetch-list)
+fetch-list:
+	@${MKDIR} ${_DISTDIR}
+	@(cd ${_DISTDIR}; \
+	 ${_MASTER_SITES_ENV} ; \
+	 for _file in ${DISTFILES}; do \
+		file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
+		select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
+		if [ ! -f $$file -a ! -f $${file##*/} ]; then \
+			if [ ! -z "$$select" ] ; then \
+				__MASTER_SITES_TMP= ; \
+				for group in $$select; do \
+					if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
+						eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \
+						__MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
+					fi; \
+				done; \
+				___MASTER_SITES_TMP= ; \
+				SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+			else \
+				SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
+			fi; \
+			for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
+				if [ ! -z "`${ECHO_CMD} ${NOFETCHFILES} | ${GREP} -w $${file}`" ]; then \
+					if [ -z "`${ECHO_CMD} ${MASTER_SITE_OVERRIDE} | ${GREP} -w $${site}`" ]; then \
+						continue; \
+					fi; \
+				fi; \
+				DIR=${DIST_SUBDIR};\
+				CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
+				case $${file} in \
+				*/*)	args="-o $${file} $${site}$${file}";; \
+				*)		args=$${site}$${file};; \
+				esac; \
+				${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \
+			done; \
+			${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \
+		fi; \
+	done)
+.if defined(PATCHFILES)
+	@(cd ${_DISTDIR}; \
+	 ${_PATCH_SITES_ENV} ; \
+	 for _file in ${PATCHFILES}; do \
+		file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^-:][^:]*$$//'` ; \
+		select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
+		file=`${ECHO_CMD} $$file | ${SED} -E -e 's/:-[^:]+$$//'` ; \
+		if [ ! -f $$file -a ! -f $${file##*/} ]; then \
+			if [ ! -z "$$select" ] ; then \
+				__PATCH_SITES_TMP= ; \
+				for group in $$select; do \
+					if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
+						eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \
+						__PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
+				fi; \
+				done; \
+				___PATCH_SITES_TMP= ; \
+				SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+			else \
+				SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
+			fi; \
+			for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
+				CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \
+				case $${file} in \
+				*/*)	args="-o $${file} $${site}$${file}";; \
+				*)		args=$${site}$${file};; \
+				esac; \
+				${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \
+			done; \
+			${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \
+		fi; \
+	 done)
+.endif
+.endif
+
+.if !target(fetch-url-list-int)
+fetch-url-list-int:
+	@${MKDIR} ${_DISTDIR}
+	@(cd ${_DISTDIR}; \
+	${_MASTER_SITES_ENV}; \
+	for _file in ${DISTFILES}; do \
+		file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \
+			fileptn=`${ECHO_CMD} $$file | ${SED} 's|/|\\\\/|g;s/\./\\\\./g;s/\+/\\\\+/g;s/\?/\\\\?/g'` ; \
+		select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
+		if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f $${file##*/} ]; then \
+			if [ ! -z "$$select" ] ; then \
+				__MASTER_SITES_TMP= ; \
+				for group in $$select; do \
+					if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \
+						eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \
+						__MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \
+					fi \
+				done; \
+				___MASTER_SITES_TMP= ; \
+				SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+			else \
+				SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \
+			fi ; \
+			for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
+				case $${file} in \
+				*/*)	args="-o $${file} $${site}$${file}";; \
+				*)		args=$${site}$${file};; \
+				esac; \
+				${ECHO_CMD} $${args} ; \
+			done; \
+		fi \
+	done)
+.if defined(PATCHFILES)
+	@(cd ${_DISTDIR}; \
+	${_PATCH_SITES_ENV} ; \
+	for _file in ${PATCHFILES}; do \
+		file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^-:][^:]*$$//'` ; \
+		select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \
+		file=`${ECHO_CMD} $$file | ${SED} -E -e 's/:-[^:]+$$//'` ; \
+		fileptn=`${ECHO_CMD} $$file | ${SED} 's|/|\\\\/|g;s/\./\\\\./g;s/\+/\\\\+/g;s/\?/\\\\?/g'` ; \
+		if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f $${file##*/} ]; then \
+			if [ ! -z "$$select" ] ; then \
+				__PATCH_SITES_TMP= ; \
+				for group in $$select; do \
+					if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \
+						eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \
+						__PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \
+					fi \
+				done; \
+				___PATCH_SITES_TMP= ; \
+				SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \
+			else \
+				SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \
+			fi ; \
+			for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \
+				case $${file} in \
+				*/*)	args="-o $${file} $${site}$${file}";; \
+				*)		args=$${site}$${file};; \
+				esac; \
+				${ECHO_CMD} $${args} ; \
+			done; \
+		fi \
+	 done)
+.endif
+.endif
+
+.if !target(fetch-urlall-list)
+fetch-urlall-list:
+	@cd ${.CURDIR} && LISTALL=yes ${MAKE} fetch-url-list-int
+.endif
+
+.if !target(fetch-url-list)
+fetch-url-list:
+	@cd ${.CURDIR} && ${MAKE} fetch-url-list-int
+.endif
+
+# Generates patches.
+
+update-patches:
+	@toedit=`PATCH_WRKSRC=${PATCH_WRKSRC} \
+		PATCHDIR=${PATCHDIR} \
+		PATCH_LIST=${PATCHDIR}/patch-* \
+		DIFF_ARGS=${DIFF_ARGS} \
+		DISTORIG=${DISTORIG} \
+		${SH} ${PORTSDIR}/Tools/scripts/update-patches`; \
+	case $$toedit in "");; \
+	*) ${ECHO_CMD} -n 'edit patches: '; read i; \
+	cd ${PATCHDIR} && $${VISUAL:-$${EDIT:-/usr/bin/vi}} $$toedit;; esac
+
+# Checksumming utilities
+
+check-checksum-algorithms:
+	@ \
+	${checksum_init} \
+	\
+	for alg in ${CHECKSUM_ALGORITHMS:U}; do \
+		eval alg_executable=\$$$$alg; \
+		if [ -z "$$alg_executable" ]; then \
+			${ECHO_MSG} "Checksum algorithm $$alg: Couldn't find the executable."; \
+			${ECHO_MSG} "Set $$alg=/path/to/$$alg in /etc/make.conf and try again."; \
+			exit 1; \
+		fi; \
+	done; \
+
+checksum_init=\
+	SHA256=${SHA256};
+
+.if !target(makesum)
+makesum: check-checksum-algorithms
+	@cd ${.CURDIR} && ${MAKE} fetch NO_CHECKSUM=yes \
+		DISABLE_SIZE=yes
+	@if [ -f ${DISTINFO_FILE} ]; then ${CAT} /dev/null > ${DISTINFO_FILE}; fi
+	@( \
+		cd ${DISTDIR}; \
+		\
+		${checksum_init} \
+		\
+		for file in ${_CKSUMFILES}; do \
+			for alg in ${CHECKSUM_ALGORITHMS:U}; do \
+				eval alg_executable=\$$$$alg; \
+				\
+				if [ $$alg_executable != "NO" ]; then \
+					$$alg_executable $$file >> ${DISTINFO_FILE}; \
+				fi; \
+			done; \
+			${ECHO_CMD} "SIZE ($$file) = `${STAT} -f \"%z\" $$file`" >> ${DISTINFO_FILE}; \
+		done \
+	)
+	@for file in ${_IGNOREFILES}; do \
+		for alg in ${CHECKSUM_ALGORITHMS:U}; do \
+			${ECHO_CMD} "$$alg ($$file) = IGNORE" >> ${DISTINFO_FILE}; \
+		done; \
+	done
+.endif
+
+.if !target(checksum)
+checksum: fetch check-checksum-algorithms
+	@set -e ; \
+	${checksum_init} \
+	if [ -f ${DISTINFO_FILE} ]; then \
+		cd ${DISTDIR}; OK="";\
+		for file in ${_CKSUMFILES}; do \
+			ignored="true"; \
+			_file=$${file#${DIST_SUBDIR}/*};	\
+			for alg in ${CHECKSUM_ALGORITHMS:U}; do \
+				ignore="false"; \
+				eval alg_executable=\$$$$alg; \
+				\
+				if [ $$alg_executable != "NO" ]; then \
+					MKSUM=`$$alg_executable < $$file`; \
+					CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \
+				else \
+					ignore="true"; \
+				fi; \
+				\
+				if [ $$ignore = "false" -a -z "$$CKSUM" ]; then \
+					${ECHO_MSG} "=> No $$alg checksum recorded for $$file."; \
+					ignore="true"; \
+				fi; \
+				\
+				if [ "$$CKSUM" = "IGNORE" ]; then \
+					${ECHO_MSG} "=> $$alg Checksum for $$file is set to IGNORE in distinfo file even though"; \
+					${ECHO_MSG} "   the file is not in the "'$$'"{IGNOREFILES} list."; \
+					ignore="true"; \
+					OK=${FALSE}; \
+				fi; \
+				\
+				if [ $$ignore = "false" ]; then \
+					match="false"; \
+					for chksum in $$CKSUM; do \
+						if [ "$$chksum" = "$$MKSUM" ]; then \
+							match="true"; \
+							break; \
+						fi; \
+					done; \
+					if [ $$match = "true" ]; then \
+						${ECHO_MSG} "=> $$alg Checksum OK for $$file."; \
+						ignored="false"; \
+					else \
+						${ECHO_MSG} "=> $$alg Checksum mismatch for $$file."; \
+						refetchlist="$$refetchlist$$file "; \
+						OK="$${OK:-retry}"; \
+						[ "$${OK}" = "retry" -a ${FETCH_REGET} -gt 0 ] && ${RM} -f $${file}; \
+						ignored="false"; \
+					fi; \
+				fi; \
+			done; \
+			\
+			if [ $$ignored = "true" ]; then \
+				${ECHO_MSG} "=> No suitable checksum found for $$file."; \
+				OK="${FALSE}"; \
+			fi; \
+			\
+		done; \
+		\
+		for file in ${_IGNOREFILES}; do \
+			_file=$${file#${DIST_SUBDIR}/*};	\
+			ignored="true"; \
+			alreadymatched="false"; \
+			for alg in ${CHECKSUM_ALGORITHMS:U}; do \
+				ignore="false"; \
+				eval alg_executable=\$$$$alg; \
+				\
+				if [ $$alg_executable != "NO" ]; then \
+					CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \
+				else \
+					ignore="true"; \
+				fi; \
+				\
+				if [ $$ignore = "false" ]; then \
+					if [ -z "$$CKSUM" ]; then \
+						${ECHO_MSG} "=> No $$alg checksum for $$file recorded (expected IGNORE)"; \
+						OK="$$alreadymatched"; \
+					elif [ $$CKSUM != "IGNORE" ]; then \
+						${ECHO_MSG} "=> $$alg Checksum for $$file is not set to IGNORE in distinfo file even though"; \
+						${ECHO_MSG} "   the file is in the "'$$'"{IGNOREFILES} list."; \
+						OK="false"; \
+					else \
+						ignored="false"; \
+						alreadymatched="true"; \
+					fi; \
+				fi; \
+			done; \
+			\
+			if ( [ $$ignored = "true" ]) ; then \
+				${ECHO_MSG} "=> No suitable checksum found for $$file."; \
+				OK="false"; \
+			fi; \
+			\
+		done; \
+		\
+		if [ "$${OK:=true}" = "retry" ] && [ ${FETCH_REGET} -gt 0 ]; then \
+			${ECHO_MSG} "===>  Refetch for ${FETCH_REGET} more times files: $$refetchlist"; \
+			if ( cd ${.CURDIR} && \
+			    ${MAKE} ${.MAKEFLAGS} FORCE_FETCH="$$refetchlist" FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" fetch); then \
+				  if ( cd ${.CURDIR} && \
+			        ${MAKE} ${.MAKEFLAGS} FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" checksum ); then \
+				      OK="true"; \
+				  fi; \
+			fi; \
+		fi; \
+		\
+		if [ "$$OK" != "true" -a ${FETCH_REGET} -eq 0 ]; then \
+			${ECHO_MSG} "===>  Giving up on fetching files: $$refetchlist"; \
+			${ECHO_MSG} "Make sure the Makefile and distinfo file (${DISTINFO_FILE})"; \
+			${ECHO_MSG} "are up to date.  If you are absolutely sure you want to override this"; \
+			${ECHO_MSG} "check, type \"make NO_CHECKSUM=yes [other args]\"."; \
+			exit 1; \
+		fi; \
+		if [ "$$OK" != "true" ]; then \
+			exit 1; \
+		fi; \
+	elif [ -n "${_CKSUMFILES:M*}" ]; then \
+		${ECHO_MSG} "=> No checksum file (${DISTINFO_FILE})."; \
+	fi
+.endif
+
+################################################################
+# The special package-building targets
+# You probably won't need to touch these
+################################################################
+
+# Nobody should want to override this unless PKGNAME is simply bogus.
+
+.if !target(package-name)
+package-name:
+	@${ECHO_CMD} ${PKGNAME}
+.endif
+
+# Build a package but don't check the package cookie
+
+.if !target(repackage)
+repackage: pre-repackage package
+
+pre-repackage:
+	@${RM} -f ${PACKAGE_COOKIE}
+.endif
+
+# Build a package but don't check the cookie for installation, also don't
+# install package cookie
+
+.if !target(package-noinstall)
+package-noinstall:
+.if defined(NO_STAGE)
+	@${MKDIR} ${WRKDIR}
+	@cd ${.CURDIR} && ${MAKE} ${_PACKAGE_REAL_SEQ}
+	@${RM} -f ${TMPPLIST}
+	-@${RMDIR} ${WRKDIR}
+.else
+	@cd ${.CURDIR} && ${MAKE} package
+.endif
+.endif
+
+################################################################
+# Dependency checking
+################################################################
+
+.if !target(depends)
+depends: pkg-depends extract-depends patch-depends lib-depends fetch-depends build-depends run-depends
+
+.if defined(ALWAYS_BUILD_DEPENDS)
+_DEPEND_ALWAYS=	1
+.else
+_DEPEND_ALWAYS=	0
+.endif
+
+_INSTALL_DEPENDS=	\
+		if [ -n "${USE_PACKAGE_DEPENDS}" -o -n "${USE_PACKAGE_DEPENDS_ONLY}" ]; then \
+			subpkgfile=`(cd $$dir; ${MAKE} $$depends_args -V PKGFILE)`; \
+			subpkgname=$${subpkgfile%-*} ; \
+			subpkgname=$${subpkgname\#\#*/} ; \
+			if [ -r "$${subpkgfile}" -a "$$target" = "${DEPENDS_TARGET}" ]; then \
+				${ECHO_MSG} "===>   Installing existing package $${subpkgfile}"; \
+				if [ -n "${WITH_PKGNG}" -a $${subpkgname} = "pkg" ]; then \
+					[ -d ${WRKDIR} ] || ${MKDIR} ${WRKDIR} ; \
+					${TAR} xf $${subpkgfile} -C ${WRKDIR} -s ",/.*/,,g" "*/pkg-static" ; \
+					${WRKDIR}/pkg-static add $${subpkgfile}; \
+					${RM} -f ${WRKDIR}/pkg-static; \
+				else \
+					${PKG_ADD} $${subpkgfile}; \
+				fi; \
+			elif [ -n "${USE_PACKAGE_DEPENDS_ONLY}" -a "$${target}" = "${DEPENDS_TARGET}" ]; then \
+				${ECHO_MSG} "===>   ${PKGNAME} depends on package: $${subpkgfile} - not found"; \
+				${ECHO_MSG} "===>   USE_PACKAGE_DEPENDS_ONLY set - not building missing dependency from source"; \
+				exit 1; \
+			else \
+			  (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \
+			fi; \
+		else \
+			(cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \
+		fi; \
+		${ECHO_MSG} "===>   Returning to build of ${PKGNAME}";
+
+.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN
+${deptype:L}-depends:
+.if defined(${deptype}_DEPENDS)
+.if !defined(NO_DEPENDS)
+	@set -e ; for i in `${ECHO_CMD} "${${deptype}_DEPENDS}"`; do \
+		prog=$${i%%:*}; \
+		if [ -z "$$prog" ]; then \
+			${ECHO_MSG} "Error: there is an empty port dependency in ${deptype}_DEPENDS."; \
+			break; \
+		fi; \
+		dir=`${ECHO_CMD} $$i | ${SED} -e 's/[^:]*://'`; \
+		if ${EXPR} "$$dir" : '.*:' > /dev/null; then \
+			target=$${dir##*:}; \
+			dir=$${dir%%:*}; \
+			if [ X${DEPENDS_PRECLEAN} != "X" ]; then \
+				target="clean $$target"; \
+				depends_args="$$depends_args NOCLEANDEPENDS=yes"; \
+			fi; \
+			if [ X${DEPENDS_CLEAN} != "X" ]; then \
+				target="$$target clean"; \
+				depends_args="$$depends_args NOCLEANDEPENDS=yes"; \
+			fi; \
+		else \
+			target="${DEPENDS_TARGET}"; \
+			depends_args="${DEPENDS_ARGS}"; \
+		fi; \
+		if ${EXPR} "$$prog" : \\/ >/dev/null; then \
+			if [ -e "$$prog" ]; then \
+				if [ "$$prog" = "${NONEXISTENT}" ]; then \
+					${ECHO_MSG} "Error: ${NONEXISTENT} exists.  Please remove it, and restart the build."; \
+					${FALSE}; \
+				else \
+					${ECHO_MSG} "===>   ${PKGNAME} depends on file: $$prog - found"; \
+					if [ ${_DEPEND_ALWAYS} = 1 ]; then \
+						${ECHO_MSG} "       (but building it anyway)"; \
+						notfound=1; \
+					else \
+						notfound=0; \
+					fi; \
+				fi; \
+			else \
+				${ECHO_MSG} "===>   ${PKGNAME} depends on file: $$prog - not found"; \
+				notfound=1; \
+			fi; \
+		else \
+			case $${prog} in \
+				*\>*|*\<*|*=*)	pkg=yes;; \
+				*)		pkg="";; \
+			esac; \
+			if [ "$$pkg" != "" ]; then \
+				if ${PKG_INFO} "$$prog" > /dev/null 2>&1 ; then \
+					${ECHO_MSG} "===>   ${PKGNAME} depends on package: $$prog - found"; \
+					if [ ${_DEPEND_ALWAYS} = 1 ]; then \
+						${ECHO_MSG} "       (but building it anyway)"; \
+						notfound=1; \
+					else \
+						notfound=0; \
+					fi; \
+				else \
+					${ECHO_MSG} "===>   ${PKGNAME} depends on package: $$prog - not found"; \
+					notfound=1; \
+				fi; \
+				if [ $$notfound != 0 ]; then \
+					inverse_dep=`${ECHO_CMD} $$prog | ${SED} \
+						-e 's/<=/=gt=/; s/</=ge=/; s/>=/=lt=/; s/>/=le=/' \
+						-e 's/=gt=/>/; s/=ge=/>=/; s/=lt=/</; s/=le=/<=/'`; \
+					pkg_info=`${PKG_INFO} -E "$$inverse_dep" || ${TRUE}`; \
+					if [ "$$pkg_info" != "" ]; then \
+						${ECHO_MSG} "===>   Found $$pkg_info, but you need to upgrade to $$prog."; \
+						exit 1; \
+					fi; \
+				fi; \
+			elif ${WHICH} "$$prog" > /dev/null 2>&1 ; then \
+				${ECHO_MSG} "===>   ${PKGNAME} depends on executable: $$prog - found"; \
+				if [ ${_DEPEND_ALWAYS} = 1 ]; then \
+					${ECHO_MSG} "       (but building it anyway)"; \
+					notfound=1; \
+				else \
+					notfound=0; \
+				fi; \
+			else \
+				${ECHO_MSG} "===>   ${PKGNAME} depends on executable: $$prog - not found"; \
+				notfound=1; \
+			fi; \
+		fi; \
+		if [ $$notfound != 0 ]; then \
+			${ECHO_MSG} "===>    Verifying $$target for $$prog in $$dir"; \
+			if [ ! -d "$$dir" ]; then \
+				${ECHO_MSG} "     => No directory for $$prog.  Skipping.."; \
+			else \
+				${_INSTALL_DEPENDS} \
+			fi; \
+		fi; \
+	done
+.endif
+.else
+	@${DO_NADA}
+.endif
+.endfor
+
+lib-depends:
+.if defined(LIB_DEPENDS) && !defined(NO_DEPENDS)
+	@set -e ; \
+	for i in ${LIB_DEPENDS:M*.so*\:*}; do \
+		lib=$${i%%:*} ; \
+		dir=$${i#*:}  ; \
+		target="${DEPENDS_TARGET}"; \
+		depends_args="${DEPENDS_ARGS}"; \
+		${ECHO_MSG}  -n "===>   ${PKGNAME} depends on shared library: $${lib}" ; \
+		found=0 ; \
+		dirs="${LIB_DIRS} `${CAT} ${LOCALBASE}/libdata/ldconfig/* 2>/dev/null || : `" ; \
+		for libdir in $$dirs; do \
+			test -f $${libdir}/$${lib} || continue; \
+			if [ -x /usr/bin/file ]; then \
+				_LIB_FILE=`realpath $${libdir}/$${lib}`; \
+				[ `file -b -L --mime-type $${_LIB_FILE}` = "application/x-sharedlib" ] || continue ; \
+			fi ; \
+			found=1 ; \
+			${ECHO_MSG} " - found"; \
+		done ; \
+		if [ $${found} -eq 0 ]; then \
+			${ECHO_MSG} " - not found"; \
+			${ECHO_MSG} "===>    Verifying for $$lib in $$dir"; \
+			if [ ! -d "$$dir" ] ; then \
+				${ECHO_MSG} "    => No directory for $$lib.  Skipping.."; \
+			else \
+				${_INSTALL_DEPENDS} \
+			fi ; \
+		fi ; \
+	done
+	@set -e ; for i in ${LIB_DEPENDS:N*.so*\:*}; do \
+		lib=$${i%%:*}; \
+		pattern="`${ECHO_CMD} $$lib | ${SED} -E -e 's/\./\\\\./g' -e 's/(\\\\)?\+/\\\\+/g'`"\
+		dir=$${i#*:}; \
+		target=$${i##*:}; \
+		if ${TEST} $$dir = $$target; then \
+			target="${DEPENDS_TARGET}"; \
+			depends_args="${DEPENDS_ARGS}"; \
+		else \
+			dir=$${dir%%:*}; \
+		fi; \
+		${ECHO_MSG} -n "===>   ${PKGNAME} depends on shared library: $$lib"; \
+		if ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \
+			${ECHO_MSG} " - found"; \
+			if [ ${_DEPEND_ALWAYS} = 1 ]; then \
+				${ECHO_MSG} "       (but building it anyway)"; \
+				notfound=1; \
+			else \
+				notfound=0; \
+			fi; \
+		else \
+			${ECHO_MSG} " - not found"; \
+			notfound=1; \
+		fi; \
+		if [ $$notfound != 0 ]; then \
+			${ECHO_MSG} "===>    Verifying $$target for $$lib in $$dir"; \
+			if [ ! -d "$$dir" ]; then \
+				${ECHO_MSG} "     => No directory for $$lib.  Skipping.."; \
+			else \
+				${_INSTALL_DEPENDS} \
+				if ! ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \
+					${ECHO_MSG} "Error: shared library \"$$lib\" does not exist"; \
+					${FALSE}; \
+				fi; \
+			fi; \
+		fi; \
+	done
+.endif
+
+.endif
+
+# Dependency lists: both build and runtime, recursive.  Print out directory names.
+
+_UNIFIED_DEPENDS=${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS}
+_DEPEND_DIRS=	${_UNIFIED_DEPENDS:C,^[^:]*:([^:]*).*$,\1,}
+_DEPEND_SPECIALS=	${_UNIFIED_DEPENDS:M*\:*\:*:C,^[^:]*:([^:]*):.*$,\1,}
+
+all-depends-list:
+	@${ALL-DEPENDS-LIST}
+
+ALL-DEPENDS-LIST= \
+	L="${_DEPEND_DIRS}";						\
+	checked="";							\
+	while [ -n "$$L" ]; do						\
+		l="";							\
+		for d in $$L; do					\
+			case $$checked in				\
+			$$d\ *|*\ $$d\ *|*\ $$d)			\
+				continue;;				\
+			esac;						\
+			checked="$$checked $$d";			\
+			if [ ! -d $$d ]; then				\
+				${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
+				continue;				\
+			fi;						\
+			${ECHO_CMD} $$d;				\
+			if ! children=$$(cd $$d && ${MAKE} -V _DEPEND_DIRS); then\
+				${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
+				continue;				\
+			fi;						\
+			for child in $$children; do			\
+				case "$$checked $$l" in			\
+				$$child\ *|*\ $$child\ *|*\ $$child)	\
+					continue;;			\
+				esac;					\
+				l="$$l $$child";			\
+			done;						\
+		done;							\
+		L=$$l;							\
+	done
+
+CLEAN-DEPENDS-FULL= \
+	L="${_DEPEND_DIRS}";						\
+	checked="";							\
+	while [ -n "$$L" ]; do						\
+		l="";							\
+		for d in $$L; do					\
+			case $$checked in				\
+			$$d\ *|*\ $$d\ *|*\ $$d)			\
+				continue;;				\
+			esac;						\
+			checked="$$checked $$d";			\
+			if [ ! -d $$d ]; then				\
+				${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
+				continue;				\
+			fi;						\
+			if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \
+				${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
+				continue;				\
+			fi;						\
+			state=0;					\
+			for child in $$children; do			\
+				case $$state in				\
+				0)					\
+					if [ -d $$child ]; then 	\
+						${ECHO_CMD} $$d;	\
+					fi;				\
+					state=1;;			\
+				1)					\
+					case "$$checked $$l" in		\
+					$$child\ *|*\ $$child\ *|*\ $$child) \
+						continue;;		\
+					esac;				\
+					l="$$l $$child";;		\
+				esac;					\
+			done;						\
+		done;							\
+		L=$$l;							\
+	done
+
+CLEAN-DEPENDS-LIMITED= \
+	L="${_DEPEND_DIRS}";						\
+	checked="";							\
+	while [ -n "$$L" ]; do						\
+		l="";							\
+		for d in $$L; do					\
+			case $$checked in				\
+			$$d\ *|*\ $$d\ *|*\ $$d)			\
+				continue;;				\
+			esac;						\
+			checked="$$checked $$d";			\
+			if [ ! -d $$d ]; then				\
+				${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \
+				continue;				\
+			fi;						\
+			if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \
+				${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \
+				continue;				\
+			fi;						\
+			state=0;					\
+			for child in $$children; do			\
+				case $$state in				\
+				0)					\
+					if [ ! -d $$child ]; then 	\
+						break;		\
+					fi;				\
+					state=1;			\
+					${ECHO_CMD} $$d;;		\
+				1)					\
+					case "$$checked $$l" in		\
+					$$child\ *|*\ $$child\ *|*\ $$child) \
+						continue;;		\
+					esac;				\
+					l="$$l $$child";;		\
+				esac;					\
+			done;						\
+		done;							\
+		L=$$l;							\
+	done
+
+.if !target(clean-depends)
+clean-depends:
+	@for dir in $$(${CLEAN-DEPENDS-FULL}); do \
+		(cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \
+	done
+.endif
+
+.if !target(limited-clean-depends)
+limited-clean-depends:
+	@for dir in $$(${CLEAN-DEPENDS-LIMITED}); do \
+		(cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \
+	done
+.endif
+
+.if !target(deinstall-depends)
+deinstall-depends:
+	@for dir in $$(${ALL-DEPENDS-LIST}); do \
+		(cd $$dir; ${MAKE} deinstall); \
+	done
+.endif
+
+.if !target(fetch-specials)
+fetch-specials:
+	@${ECHO_MSG} "===> Fetching all distfiles required by ${PKGNAME} for building"
+	@for dir in ${_DEPEND_SPECIALS}; do \
+		(cd $$dir; ${MAKE} fetch); \
+	done
+.endif
+
+.if !target(fetch-recursive)
+fetch-recursive:
+	@${ECHO_MSG} "===> Fetching all distfiles for ${PKGNAME} and dependencies"
+	@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+		(cd $$dir; ${MAKE} fetch); \
+	done
+.endif
+
+.if !target(fetch-recursive-list)
+fetch-recursive-list:
+	@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+		(cd $$dir; ${MAKE} fetch-list); \
+	done
+.endif
+
+# Used by fetch-required and fetch-required list, this script looks
+# at each of the dependencies. If 3 items are specified in the tuple,
+# such as foo:${PORTSDIR}/graphics/foo:extract, the first item (foo)
+# is examined. Only if it begins with a / and does not exist on the
+# file-system will ``make targ'' proceed.
+# For more usual (dual-item) dependency tuples, the ``make targ''
+# proceeds, if the exact package, which the directory WOULD'VE installed,
+# is not yet installed.
+# This is the exact behaviour of the old code, and it may need
+# revisiting. For example, the entire first case seems dubious, and in
+# the second case we, probably, should be satisfied with _any_ (earlier)
+# package, with the same origin as that of the dir.
+#
+#	-mi
+FETCH_LIST?=	for i in $$deps; do \
+		prog=$${i%%:*}; dir=$${i\#*:}; \
+		case $$dir in	\
+		*:*) if [ $$prog != $${prog\#/} -o ! -e $$prog ]; then	\
+				dir=$${dir%%:*};	\
+			else	\
+				continue;	\
+			fi;;	\
+		*) if [ -d ${PKG_DBDIR}/$$(cd $$dir; ${MAKE} -V PKGNAME) ]; then \
+				continue;	\
+			fi;;	\
+		esac;	\
+		echo cd $$dir; cd $$dir; ${MAKE} $$targ; \
+	done
+
+.if !target(fetch-required)
+fetch-required: fetch
+.if defined(NO_DEPENDS)
+	@${ECHO_MSG} "===> NO_DEPENDS is set, not fetching any other distfiles for ${PKGNAME}"
+.else
+	@${ECHO_MSG} "===> Fetching all required distfiles for ${PKGNAME} and dependencies"
+.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN
+.if defined(${deptype}_DEPENDS)
+	@targ=fetch; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST}
+.endif
+.endfor
+.endif
+
+.endif
+
+.if !target(fetch-required-list)
+fetch-required-list: fetch-list
+.if !defined(NO_DEPENDS)
+.for deptype in PKG EXTRACT PATCH FETCH BUILD RUN
+.if defined(${deptype}_DEPENDS)
+	@targ=fetch-list; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST}
+.endif
+.endfor
+.endif
+.endif
+
+.if !target(checksum-recursive)
+checksum-recursive:
+	@${ECHO_MSG} "===> Fetching and checking checksums for ${PKGNAME} and dependencies"
+	@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+		(cd $$dir; ${MAKE} checksum); \
+	done
+.endif
+
+# Dependency lists: build and runtime.  Print out directory names.
+
+build-depends-list:
+.if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS)
+	@${BUILD-DEPENDS-LIST}
+.endif
+
+BUILD-DEPENDS-LIST= \
+	for dir in $$(${ECHO_CMD} "${PKG_DEPENDS} ${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${SED} -E -e 's,([^: ]*):([^: ]*)(:[^ ]*)?,\2,g' -e 'y/ /\n/'| ${SORT} -u); do \
+		if [ -d $$dir ]; then \
+			${ECHO_CMD} $$dir; \
+		else \
+			${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
+		fi; \
+	done | ${SORT} -u
+
+run-depends-list:
+.if defined(LIB_DEPENDS) || defined(RUN_DEPENDS)
+	@${RUN-DEPENDS-LIST}
+.endif
+
+RUN-DEPENDS-LIST= \
+	for dir in $$(${ECHO_CMD} "${_LIB_RUN_DEPENDS:C,.*:([^:]*).*,\1,}" | ${SED} -e 'y/ /\n/' | ${SORT} -u); do \
+		if [ -d $$dir ]; then \
+			${ECHO_CMD} $$dir; \
+		else \
+			${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
+		fi; \
+	done | ${SORT} -u
+
+# Package (recursive runtime) dependency list.  Print out both directory names
+# and package names.
+
+package-depends-list:
+.if defined(CHILD_DEPENDS) || defined(LIB_DEPENDS) || defined(RUN_DEPENDS)
+	@${PACKAGE-DEPENDS-LIST}
+.endif
+
+_LIB_RUN_DEPENDS=	${LIB_DEPENDS} ${RUN_DEPENDS}
+PACKAGE-DEPENDS-LIST?= \
+	if [ "${CHILD_DEPENDS}" ]; then \
+		installed=$$(${PKG_INFO} -qO ${PKGORIGIN} 2>/dev/null || \
+			${TRUE}); \
+		if [ "$$installed" ]; then \
+			break; \
+		fi; \
+		if [ -z "$$installed" ]; then \
+			installed="${PKGNAME}"; \
+		fi; \
+		for pkgname in $$installed; do \
+			${ECHO_CMD} "$$pkgname ${.CURDIR} ${PKGORIGIN}"; \
+		done; \
+	fi; \
+	checked="${PARENT_CHECKED}"; \
+	for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \
+		dir=$$(${REALPATH} $$dir); \
+		if [ -d $$dir ]; then \
+			case $$checked in	\
+			$$dir|$$dir\ *|*\ $$dir|*\ $$dir\ *) continue;;	\
+			esac;	\
+			childout=$$(cd $$dir; ${MAKE} CHILD_DEPENDS=yes PARENT_CHECKED="$$checked" package-depends-list); \
+			set -- $$childout; \
+			childdir=""; \
+			while [ $$\# != 0 ]; do \
+				childdir="$$childdir $$2"; \
+				${ECHO_CMD} "$$1 $$2 $$3"; \
+				shift 3; \
+			done; \
+			checked="$$dir $$childdir $$checked"; \
+		else \
+			${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \
+		fi; \
+	done
+
+ACTUAL-PACKAGE-DEPENDS?= \
+	if [ "${_LIB_RUN_DEPENDS}" != "  " ]; then \
+		origins=$$(for pkgname in ${PKG_DBDIR}/*; do \
+			if [ -e $$pkgname/+CONTENTS ]; then \
+				${ECHO_CMD} $${pkgname\#\#*/}; \
+				${SED} -n -e "s/@comment ORIGIN://p" $$pkgname/+CONTENTS; \
+			fi; \
+		done); \
+		for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \
+			tmp=$${dir\#${PORTSDIR}/}; \
+			if [ "$$tmp" = "$$dir" ]; then \
+				tmp=$${dir%/*}; \
+				dir=$${tmp\#\#*/}/$${dir\#\#*/}; \
+			else \
+				dir=$$tmp; \
+			fi; \
+			set -- $$origins; \
+			while [ $$\# -gt 1 ]; do \
+				if [ ! -d "${PORTSDIR}/$$2" ]; then \
+					shift; \
+					continue; \
+				fi; \
+				if [ "$$dir" = "$$2" ]; then \
+					${ECHO_CMD} $$1:$$dir; \
+					if [ -e ${PKG_DBDIR}/$$1/+CONTENTS -a -z "${EXPLICIT_PACKAGE_DEPENDS}" ]; then \
+						packagelist="$$packagelist ${PKG_DBDIR}/$$1/+CONTENTS"; \
+					fi; \
+					break; \
+				fi; \
+				shift 2; \
+			done; \
+		done; \
+		[ -z "$$packagelist" ] || ${AWK} -F '( |:)' 'BEGIN { pkgname="broken_contents" } /@pkgdep / { pkgname=$$2 } /@comment DEPORIGIN:/ { printf "%s:%s\n", pkgname, $$3; pkgname="broken_contents" }' $$packagelist; \
+	fi
+
+# Print out package names.
+
+package-depends:
+	@${PACKAGE-DEPENDS-LIST} | ${AWK} '{print $$1":"$$3}'
+
+actual-package-depends:
+	@${ACTUAL-PACKAGE-DEPENDS}
+
+# Build packages for port and dependencies
+
+package-recursive: package
+	@for dir in $$(${ALL-DEPENDS-LIST}); do \
+		(cd $$dir; ${MAKE} package-noinstall); \
+	done
+
+# Show missing dependencies
+missing:
+	@_origins=$$(${PKG_INFO} -aoq); \
+	for dir in $$(${ALL-DEPENDS-LIST}); do \
+		_origin=$${dir##${PORTSDIR}/}; \
+		if ! $$(${ECHO_CMD} $${_origins} | ${GREP} -q $${_origin}); then \
+			${ECHO_CMD} $${_origin}; \
+		fi; \
+	done
+
+################################################################
+# Everything after here are internal targets and really
+# shouldn't be touched by anybody but the release engineers.
+################################################################
+
+# This target generates an index entry suitable for aggregation into
+# a large index.  Format is:
+#
+# distribution-name|port-path|installation-prefix|comment| \
+#  description-file|maintainer|categories|extract-depends| \
+#  patch-depends|fetch-depends|build-depends|run-depends|www site
+#
+# If this ever changes, portmgr should contact the portsnap maintainer
+# first to avoid gratuitous breakage.
+
+. if !target(describe)
+_EXTRACT_DEPENDS=${EXTRACT_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
+_PATCH_DEPENDS=${PATCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
+_FETCH_DEPENDS=${FETCH_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
+_LIB_DEPENDS=${LIB_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u}
+_BUILD_DEPENDS=${BUILD_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS}
+_RUN_DEPENDS=${RUN_DEPENDS:C/^[^ :]+:([^ :]+)(:[^ :]+)?/\1/:O:u} ${_LIB_DEPENDS}
+. if exists(${DESCR})
+_DESCR=${DESCR}
+. else
+_DESCR=/dev/null
+. endif
+
+.  if defined(BUILDING_INDEX) && defined(INDEX_PORTS)
+INDEX_OUT=${INDEX_TMPDIR}/${INDEXFILE}.desc.aggr
+.  else
+INDEX_OUT=/dev/stdout
+.  endif
+
+describe:
+	@(${ECHO_CMD} -n "${PKGNAME}|${.CURDIR}|${PREFIX}|"; \
+	${ECHO_CMD} -n ${COMMENT:Q}; \
+	${ECHO_CMD} -n "|${_DESCR}|${MAINTAINER}|${CATEGORIES}|${_EXTRACT_DEPENDS}|${_PATCH_DEPENDS}|${_FETCH_DEPENDS}|${_BUILD_DEPENDS:O:u}|${_RUN_DEPENDS:O:u}|"; \
+	while read one two discard; do \
+		case "$$one" in \
+		WWW:)   case "$$two" in \
+			https://*|http://*|ftp://*) ${ECHO_CMD} -n "$$two" ;; \
+			*) ${ECHO_CMD} -n "http://$$two" ;; \
+			esac; \
+			break; \
+			;; \
+		esac; \
+	done < ${DESCR}; ${ECHO_CMD}) >>${INDEX_OUT}
+. endif
+
+www-site:
+.if exists(${DESCR})
+	@${AWK} '$$1 ~ /^WWW:/ {print $$2}' ${DESCR} | ${HEAD} -1
+.else
+	@${ECHO_CMD}
+.endif
+
+.if !target(readmes)
+readmes:	readme
+.endif
+
+.if !target(readme)
+readme:
+	@${RM} -f ${.CURDIR}/README.html
+	@cd ${.CURDIR} && ${MAKE} ${.CURDIR}/README.html
+.endif
+
+${.CURDIR}/README.html:
+	@${ECHO_MSG} "===>   Creating README.html for ${PKGNAME}"
+	@${SED} -e 's|%%PORT%%|'$$(${ECHO_CMD} ${.CURDIR} | \
+							  ${SED} -e 's|.*/\([^/]*/[^/]*\)$$|\1|')'|g' \
+			-e 's|%%PKG%%|${PKGNAME}|g' \
+			-e 's|%%COMMENT%%|'"$$(${ECHO_CMD} ${COMMENT:Q})"'|' \
+			-e '/%%COMMENT%%/d' \
+			-e 's|%%DESCR%%|'"$$(${ECHO_CMD} ${DESCR} | \
+								 ${SED} -e 's|${.CURDIR}/||')"'|' \
+			-e 's|%%EMAIL%%|'"$$(${ECHO_CMD} "${MAINTAINER}" | \
+								 ${SED} -e 's/([^)]*)//;s/.*<//;s/>.*//')"'|g' \
+			-e 's|%%MAINTAINER%%|${MAINTAINER}|g' \
+			-e 's|%%WEBSITE%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-www-site)"'|' \
+			-e 's|%%BUILD_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-build-depends-list)"'|' \
+			-e 's|%%RUN_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} pretty-print-run-depends-list)"'|' \
+			-e 's|%%TOP%%|'"$$(${ECHO_CMD} ${CATEGORIES} | \
+							   ${SED} -e 's| .*||' -e 's|[^/]*|..|g')"'/..|' \
+		${TEMPLATES}/README.port >> ${.TARGET}
+
+# The following two targets require an up-to-date INDEX in ${PORTSDIR}
+
+_PRETTY_PRINT_DEPENDS_LIST=\
+	if [ ! -r ${INDEXDIR}/${INDEXFILE} ] ; then \
+		${ECHO_MSG} "${.TARGET} requires an INDEX file (${INDEXFILE}). Please run make index or make fetchindex."; \
+	else \
+		target=${.TARGET:C/pretty-print-(.*)-depends-list/\1/} ; \
+		if [ "$$target" = "build" ] ; then fldnum=8 ; else fldnum=9 ; fi; \
+		${ECHO_MSG} -n 'This port requires package(s) "' ; \
+		${ECHO_MSG} -n `${AWK} -F\| "\\$$1 ~ /^${PKGNAME}/ {print \\$$$${fldnum};}" ${INDEXDIR}/${INDEXFILE}` ; \
+		${ECHO_MSG} "\" to $$target."; \
+	fi;
+
+
+.if !target(pretty-print-build-depends-list)
+pretty-print-build-depends-list:
+.if defined(PKG_DEPENDS) || defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || \
+	defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS)
+	@${_PRETTY_PRINT_DEPENDS_LIST}
+.endif
+.endif
+
+.if !target(pretty-print-run-depends-list)
+pretty-print-run-depends-list:
+.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS)
+	@${_PRETTY_PRINT_DEPENDS_LIST}
+.endif
+.endif
+
+_SUB_LIST_TEMP=	${SUB_LIST:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/}
+.if !target(apply-slist)
+apply-slist:
+.if defined(SUB_FILES)
+.for file in ${SUB_FILES}
+.if !exists(${FILESDIR}/${file}.in)
+	@${ECHO_MSG} "** Missing ${FILESDIR}/${file}.in for ${PKGNAME}."; exit 1
+.else
+	@${SED} ${_SUB_LIST_TEMP} -e '/^@comment /d' ${FILESDIR}/${file}.in > ${WRKDIR}/${file}
+.endif
+.endfor
+.for i in pkg-message pkg-install pkg-deinstall pkg-req
+.if ${SUB_FILES:M${i}*}!=""
+${i:S/-//:U}=	${WRKDIR}/${SUB_FILES:M${i}*}
+.endif
+.endfor
+.endif
+.endif
+
+# Generate packing list.  Also tests to make sure all required package
+# files exist.
+
+.if !target(generate-plist)
+generate-plist:
+	@${ECHO_MSG} "===>   Generating temporary packing list"
+	@${MKDIR} `${DIRNAME} ${TMPPLIST}`
+	@if [ ! -f ${DESCR} ]; then ${ECHO_MSG} "** Missing pkg-descr for ${PKGNAME}."; exit 1; fi
+.if defined(NO_STAGE) || defined(NEED_ROOT)
+	@>${TMPPLIST}
+.else
+	@${ECHO_CMD} -e "@owner root\n@group wheel" >${TMPPLIST}
+.endif
+	@for file in ${PLIST_FILES}; do \
+		${ECHO_CMD} $${file} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} >> ${TMPPLIST}; \
+	done
+.if defined(NO_STAGE)
+	@for man in ${__MANPAGES}; do \
+		${ECHO_CMD} $${man} >> ${TMPPLIST}; \
+	done
+.for _PREFIX in ${PREFIX}
+.if ${_TMLINKS:M${_PREFIX}*}x != x
+	@for i in ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||}; do \
+		${ECHO_CMD} "$$i" >> ${TMPPLIST}; \
+	done
+.endif
+.if ${_TMLINKS:N${_PREFIX}*}x != x
+	@${ECHO_CMD} @cwd / >> ${TMPPLIST}
+	@for i in ${_TMLINKS:N${_PREFIX}*:S|^/||}; do \
+		${ECHO_CMD} "$$i" >> ${TMPPLIST}; \
+	done
+	@${ECHO_CMD} '@cwd ${PREFIX}' >> ${TMPPLIST}
+.endif
+.endfor
+.endif
+	@if [ -f ${PLIST} ]; then \
+		${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${PLIST} >> ${TMPPLIST}; \
+	fi
+
+.for dir in ${PLIST_DIRS}
+	@${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrm ,' >> ${TMPPLIST}
+.endfor
+.for dir in ${PLIST_DIRSTRY}
+	@${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrmtry ,' >> ${TMPPLIST}
+.endfor
+
+.for reinplace in ${PLIST_REINPLACE}
+.if defined(PLIST_REINPLACE_${reinplace:U})
+	@${SED} -i "" -e '${PLIST_REINPLACE_${reinplace:U}}' ${TMPPLIST}
+.endif
+.endfor
+
+.if defined(USE_LINUX_PREFIX)
+.if defined(USE_LDCONFIG)
+	@${ECHO_CMD} "@exec ${LDCONFIG_CMD}" >> ${TMPPLIST}
+	@${ECHO_CMD} "@unexec ${LDCONFIG_CMD}" >> ${TMPPLIST}
+.endif
+.else
+.if defined(USE_LDCONFIG)
+.if !defined(INSTALL_AS_USER)
+	@${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG}" >> ${TMPPLIST}
+	@${ECHO_CMD} "@unexec ${LDCONFIG} -R" >> ${TMPPLIST}
+.else
+	@${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG} || ${TRUE}" >> ${TMPPLIST}
+	@${ECHO_CMD} "@unexec ${LDCONFIG} -R || ${TRUE}" >> ${TMPPLIST}
+.endif
+.endif
+.if defined(USE_LDCONFIG32)
+.if !defined(INSTALL_AS_USER)
+	@${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32}" >> ${TMPPLIST}
+	@${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R" >> ${TMPPLIST}
+.else
+	@${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32} || ${TRUE}" >> ${TMPPLIST}
+	@${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R || ${TRUE}" >> ${TMPPLIST}
+.endif
+.endif
+.endif
+.if !defined(WITH_PKGNG)
+	@cd ${.CURDIR} && { ${MAKE} pretty-print-config | fold -sw 120 | ${SED} -e 's/^/@comment OPTIONS:/'; } >> ${TMPPLIST}
+.endif
+.endif
+
+${TMPPLIST}:
+	@cd ${.CURDIR} && ${MAKE} generate-plist
+
+${TMPPLIST_SORT}: ${TMPPLIST}
+	@${SORT} -u ${TMPPLIST} >${TMPPLIST_SORT}
+
+.if !target(add-plist-docs)
+.if defined(PORTDOCS) && !defined(NOPORTDOCS)
+add-plist-docs:
+	@if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
+		[ "`${SED} -En -e '/^@cw?d[ 	]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
+		${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
+	fi
+.for x in ${PORTDOCS}
+	@if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
+		if [ ! -e ${STAGEDIR}${DOCSDIR}/${x} ]; then \
+		${ECHO_CMD} ${DOCSDIR_REL}/${x} >> ${TMPPLIST}; \
+	fi;fi
+.endfor
+	@${FIND} -P ${PORTDOCS:S/^/${STAGEDIR}${DOCSDIR}\//} ! -type d 2>/dev/null | \
+		${SED} -ne 's,^${STAGEDIR}${PREFIX}/,,p' >> ${TMPPLIST}
+	@${FIND} -P -d ${PORTDOCS:S/^/${STAGEDIR}${DOCSDIR}\//} -type d 2>/dev/null | \
+		${SED} -ne 's,^${STAGEDIR}${PREFIX}/,@dirrm ,p' >> ${TMPPLIST}
+	@${ECHO_CMD} "@dirrm ${DOCSDIR_REL}" >> ${TMPPLIST}
+.endif
+.endif
+
+.if !target(add-plist-examples)
+.if defined(PORTEXAMPLES) && !defined(NOPORTEXAMPLES)
+add-plist-examples:
+	@if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
+		[ "`${SED} -En -e '/^@cw?d[ 	]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
+		${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
+	fi
+.for x in ${PORTEXAMPLES}
+	@if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
+		if [ ! -e ${STAGEDIR}${EXAMPLESDIR}/${x} ]; then \
+		${ECHO_CMD} ${EXAMPLESDIR}/${x} | \
+			${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \
+	fi;fi
+.endfor
+	@${FIND} -P ${PORTEXAMPLES:S/^/${STAGEDIR}${EXAMPLESDIR}\//} ! -type d 2>/dev/null | \
+		${SED} -ne 's,^${STAGEDIR}${PREFIX}/,,p' >> ${TMPPLIST}
+	@${FIND} -P -d ${PORTEXAMPLES:S/^/${STAGEDIR}${EXAMPLESDIR}\//} -type d 2>/dev/null | \
+		${SED} -ne 's,^${STAGEDIR}${PREFIX}/,@dirrm ,p' >> ${TMPPLIST}
+	@${ECHO_CMD} "@dirrm ${EXAMPLESDIR_REL}" >> ${TMPPLIST}
+.endif
+.endif
+
+.if !target(add-plist-data)
+.if defined(PORTDATA) && !defined(NOPORTDATA)
+add-plist-data:
+	@if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \
+		[ "`${SED} -En -e '/^@cw?d[ 	]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \
+		${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
+	fi
+.for x in ${PORTDATA}
+	@if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \
+		if [ ! -e ${STAGEDIR}${DATADIR}/${x} ]; then \
+		${ECHO_CMD} ${DATADIR}/${x} | \
+			${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \
+	fi;fi
+.endfor
+	@${FIND} -P ${PORTDATA:S/^/${STAGEDIR}${DATADIR}\//} ! -type d 2>/dev/null | \
+		${SED} -ne 's,^${STAGEDIR}${PREFIX}/,,p' >> ${TMPPLIST}
+	@${FIND} -P -d ${PORTDATA:S/^/${STAGEDIR}${DATADIR}\//} -type d 2>/dev/null | \
+		${SED} -ne 's,^${STAGEDIR}${PREFIX}/,@dirrm ,p' >> ${TMPPLIST}
+	@${ECHO_CMD} "@dirrm ${DATADIR_REL}" >> ${TMPPLIST}
+.endif
+.endif
+
+.if !target(add-plist-buildinfo)
+add-plist-buildinfo:
+.if defined(PACKAGE_BUILDING)
+	@${ECHO_CMD} "@comment Build details:  ${BUILDHOST}|${JAIL}|${BUILD}|${PORTSTREE}|${BUILDDATE}" >> ${TMPPLIST}
+.endif
+.endif
+
+.if !target(add-plist-info)
+.if defined(INFO)
+add-plist-info:
+# Process GNU INFO files at package install/deinstall time
+.for i in ${INFO}
+.if defined(NO_STAGE)
+	install-info --quiet ${PREFIX}/${INFO_PATH}/$i.info ${PREFIX}/${INFO_PATH}/dir
+.endif
+.if !defined(WITH_PKGNG)
+	@${ECHO_CMD} "@unexec install-info --quiet --delete %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \
+		>> ${TMPPLIST}
+	@${ECHO_CMD} "@unexec [ \`info -d %D/${INFO_PATH}  --output - 2>/dev/null | grep -c '^*'\` -eq 1 ] && rm -f %D/${INFO_PATH}/dir || :"\
+		>> ${TMPPLIST}
+	@${LS} ${STAGEDIR}${PREFIX}/${INFO_PATH}/$i.info* | ${SED} -e s:${STAGEDIR}${PREFIX}/::g >> ${TMPPLIST}
+	@${ECHO_CMD} "@exec install-info --quiet %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \
+		>> ${TMPPLIST}
+.else
+	@${LS} ${STAGEDIR}${PREFIX}/${INFO_PATH}/$i.info* 2>/dev/null | ${SED} -e s:${STAGEDIR}${PREFIX}/:@info\ :g >> ${TMPPLIST}
+.endif
+.endfor
+.if defined(INFO_SUBDIR)
+.if !defined(WITH_PKGNG)
+	@${ECHO_CMD} "@unexec ${RMDIR} %D/${INFO_PATH}/${INFO_SUBDIR} 2> /dev/null || true" >> ${TMPPLIST}
+.else
+	@${ECHO_CMD} "@dirrmtry ${INFO_PATH}/${INFO_SUBDIR}" >> ${TMPPLIST}
+.endif
+.endif
+.if (${PREFIX} != "/usr")
+	@${ECHO_CMD} "@unexec if [ -f %D/${INFO_PATH}/dir ]; then if sed -e '1,/Menu:/d' %D/${INFO_PATH}/dir | grep -q '^[*] '; then true; else rm %D/${INFO_PATH}/dir; fi; fi" >> ${TMPPLIST}
+.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${LINUXBASE})
+	@${ECHO_CMD} "@unexec rmdir %D/${INFO_PATH} 2>/dev/null || true" >> ${TMPPLIST}
+.endif
+.endif
+.endif
+.endif
+
+# If we're installing into a non-standard PREFIX, we need to remove that directory at
+# deinstall-time
+.if !target(add-plist-post)
+.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${LINUXBASE} && ${PREFIX} != "/usr")
+add-plist-post:
+	@${ECHO_CMD} "@unexec rmdir %D 2> /dev/null || true" >> ${TMPPLIST}
+.endif
+.endif
+
+.if !target(install-rc-script)
+.if defined(USE_RCORDER) || defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
+install-rc-script:
+.if defined(USE_RCORDER)
+	@${ECHO_MSG} "===> Staging early rc.d startup script(s)"
+	@${ECHO_CMD} "@cwd /" >> ${TMPPLIST}
+	@for i in ${USE_RCORDER}; do \
+		${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${STAGEDIR}/etc/rc.d/$${i%.sh}; \
+		${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \
+	done
+	@${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
+.endif
+.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES"
+	@${ECHO_MSG} "===> Staging rc.d startup script(s)"
+	@${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}
+	@for i in ${USE_RC_SUBR}; do \
+		${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${STAGEDIR}${PREFIX}/etc/rc.d/$${i%.sh}; \
+		${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \
+	done
+.endif
+.endif
+.endif
+
+# Compress (or uncompress) and symlink manpages.
+.if !target(compress-man)
+.if defined(_MANPAGES) || defined(_MLINKS)
+compress-man:
+.if ${MANCOMPRESSED} == yes && defined(NO_MANCOMPRESS)
+	@${ECHO_MSG} "===>   Uncompressing manual pages for ${PKGNAME}"
+	@_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GUNZIP_CMD} $${_manpages} ) || ${TRUE}
+.elif ${MANCOMPRESSED} == no && !defined(NO_MANCOMPRESS)
+	@${ECHO_MSG} "===>   Compressing manual pages for ${PKGNAME}"
+	@_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GZIP_CMD} $${_manpages} ) || ${TRUE}
+.endif
+.if defined(_MLINKS)
+	@set -- ${_MLINKS}; \
+	while :; do \
+		[ $$# -eq 0 ] && break || ${TRUE}; \
+		${RM} -f $${2%.gz}; ${RM} -f $$2.gz; \
+		${LN} -fs `${ECHO_CMD} $$1 $$2 | ${AWK} '{ \
+					z=split($$1, a, /\//); x=split($$2, b, /\//); \
+					while (a[i] == b[i]) i++; \
+					for (q=i; q<x; q++) printf "../"; \
+					for (; i<z; i++) printf a[i] "/"; printf a[z]; }'` $$2; \
+		shift; shift; \
+	done
+.endif
+.endif
+.endif
+
+# Fake installation of package so that user can pkg_delete it later.
+# Also, make sure that an installed port is recognized correctly in
+# accordance to the @pkgdep directive in the packing lists
+
+.if !target(fake-pkg)
+.if !defined(NO_PKG_REGISTER)
+fake-pkg:
+	@if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi
+	@${RM} -f /tmp/${PKGNAME}-required-by
+.if defined(FORCE_PKG_REGISTER)
+	@if [ -e ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY ]; then \
+		${CP} ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY /tmp/${PKGNAME}-required-by; \
+	fi
+	@${RM} -rf ${PKG_DBDIR}/${PKGNAME}
+.endif
+	@if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \
+		${ECHO_MSG} "===>   Registering installation for ${PKGNAME}"; \
+		${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \
+		${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
+		${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \
+		${ECHO_CMD} ${COMMENT:Q} > ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \
+		if [ -f ${PKGINSTALL} ]; then \
+			${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \
+		fi; \
+		if [ -f ${PKGDEINSTALL} ]; then \
+			${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \
+		fi; \
+		if [ -f ${PKGREQ} ]; then \
+			${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \
+		fi; \
+		if [ -f ${PKGMESSAGE} ]; then \
+			${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \
+			${ECHO_CMD} "@display +DISPLAY" >> ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \
+		fi; \
+		for dep in `${PKG_INFO} -qf ${PKGNAME} | ${AWK} '/^@pkgdep / {print $$2}' | ${SORT} -u`; do \
+			if [ -d ${PKG_DBDIR}/$$dep -a -z `${ECHO_CMD} $$dep | ${GREP} -E ${PKG_IGNORE_DEPENDS}` ]; then \
+				if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \
+					>/dev/null 2>&1; then \
+					${ECHO_CMD} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \
+				fi; \
+			fi; \
+		done; \
+	fi
+.if !defined(NO_MTREE)
+	@if [ -f ${MTREE_FILE} ]; then \
+		${CP} ${MTREE_FILE} ${PKG_DBDIR}/${PKGNAME}/+MTREE_DIRS; \
+	fi
+.endif
+	@if [ -e /tmp/${PKGNAME}-required-by ]; then \
+		${CAT} /tmp/${PKGNAME}-required-by >> ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY; \
+		${RM} -f /tmp/${PKGNAME}-required-by; \
+	fi
+.endif
+.endif
+
+# Depend is generally meaningless for arbitrary ports, but if someone wants
+# one they can override this.  This is just to catch people who've gotten into
+# the habit of typing `make depend all install' as a matter of course.
+#
+.if !target(depend)
+depend:
+.endif
+
+# Same goes for tags
+.if !target(tags)
+tags:
+.endif
+
+.if !defined(NOPRECIOUSMAKEVARS)
+# These won't change, so we can pass them through the environment
+.MAKEFLAGS: \
+	ARCH="${ARCH:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
+	OPSYS="${OPSYS:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
+	OSREL="${OSREL:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
+	OSVERSION="${OSVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \
+	SYSTEMVERSION="${SYSTEMVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}"
+.endif
+
+.if !target(pre-check-config)
+pre-check-config:
+.for single in ${OPTIONS_SINGLE}
+.  for opt in ${OPTIONS_SINGLE_${single}}
+.    if empty(ALL_OPTIONS:M${single}) || !empty(PORT_OPTIONS:M${single})
+.      if !empty(PORT_OPTIONS:M${opt})
+.        if defined(OPTFOUND)
+OPTIONS_WRONG_SINGLE+=	${single}
+.        else
+OPTFOUND=	true
+.        endif
+.      endif
+.    else
+# if conditional and if the condition is unchecked, remove opt from the list of
+# set options
+PORT_OPTIONS:=	${PORT_OPTIONS:N${opt}}
+OPTNOCHECK=	true
+.    endif
+.  endfor
+.  if !defined(OPTFOUND) && !defined(OPTNOCHECK)
+OPTIONS_WRONG_SINGLE+=	${single}
+.  endif
+.  undef OPTFOUND
+.  undef OPTNOCHECK
+.endfor
+.undef single
+
+.for radio in ${OPTIONS_RADIO}
+.  for opt in ${OPTIONS_RADIO_${radio}}
+.    if !empty(PORT_OPTIONS:M${opt})
+.      if defined(OPTFOUND)
+OPTIONS_WRONG_RADIO+=	${radio}
+.      else
+OPTFOUND=	true
+.      endif
+.    endif
+.  endfor
+.  undef OPTFOUND
+.endfor
+
+.for multi in ${OPTIONS_MULTI}
+.  for opt in ${OPTIONS_MULTI_${multi}}
+.    if empty(ALL_OPTIONS:M${multi}) || !empty(PORT_OPTIONS:M${multi})
+.      if !empty(PORT_OPTIONS:M${opt})
+OPTFOUND=	true
+.      endif
+.    else
+# if conditional and if the condition is unchecked, remove opt from the list of
+# set options
+PORT_OPTIONS:=	${PORT_OPTIONS:N${opt}}
+OPTNOCHECK=	true
+.    endif
+.  endfor
+.  if !defined(OPTFOUND) && !defined(OPTNOCHECK)
+OPTIONS_WRONG_MULTI+=	${multi}
+.  endif
+.  undef OPTFOUND
+.  undef OPTNOCHECK
+.endfor
+.undef multi
+.undef opt
+.endif #pre-check-config
+
+.if !target(_check-config)
+_check-config: pre-check-config
+.for multi in ${OPTIONS_WRONG_MULTI}
+	@${ECHO_MSG} "====> You must check at least one option in the ${multi} multi"
+.endfor
+.for single in ${OPTIONS_WRONG_SINGLE}
+	@${ECHO_MSG} "====> You must select one and only one option from the ${single} single"
+.endfor
+.for radio in ${OPTIONS_WRONG_RADIO}
+	@${ECHO_MSG} "====> You cannot select multiple options from the ${radio} radio"
+.endfor
+.if !empty(OPTIONS_WRONG_MULTI) || !empty(OPTIONS_WRONG_SINGLE) || !empty(OPTIONS_WRONG_RADIO)
+_CHECK_CONFIG_ERROR=	true
+.endif
+.endif # _check-config
+
+.if !target(check-config)
+check-config: _check-config
+.if !empty(_CHECK_CONFIG_ERROR)
+	@exit 1
+.endif
+.endif # check-config
+
+.if !target(sanity-config)
+sanity-config: _check-config
+.if !empty(_CHECK_CONFIG_ERROR)
+	@echo -n "Config is invalid. Re-edit? [Y/n] "; \
+	read answer; \
+	case $$answer in \
+	[Nn]|[Nn][Oo]) \
+		exit 0; \
+	esac; \
+	cd ${.CURDIR} && ${MAKE} config
+.endif
+.endif # sanity-config
+
+.if !target(pre-config)
+pre-config:
+D4P_ENV=	PKGNAME="${PKGNAME}" \
+		PORT_OPTIONS="${PORT_OPTIONS}" \
+		ALL_OPTIONS="${ALL_OPTIONS}" \
+		OPTIONS_MULTI="${OPTIONS_MULTI}" \
+		OPTIONS_SINGLE="${OPTIONS_SINGLE}" \
+		OPTIONS_RADIO="${OPTIONS_RADIO}" \
+		OPTIONS_GROUP="${OPTIONS_GROUP}" \
+		NEW_OPTIONS="${NEW_OPTIONS}" \
+		DIALOG4PORTS="${DIALOG4PORTS}" \
+		PREFIX="${PREFIX}" \
+		LOCALBASE="${LOCALBASE}" \
+		PORTSDIR="${PORTSDIR}" \
+		MAKE="${MAKE}" \
+		D4PHEIGHT="${D4PHEIGHT}" \
+		D4PWIDTH="${D4PWIDTH}" \
+		D4PFULLSCREEN="${D4PFULLSCREEN}"
+.if exists(${PKGHELP})
+D4P_ENV+=	PKGHELP="${PKGHELP}"
+.endif
+.for opt in ${ALL_OPTIONS}
+D4P_ENV+=	 ${opt}_DESC=""${${opt}_DESC:Q}""
+.endfor
+.for otype in MULTI GROUP SINGLE RADIO
+.  for m in ${OPTIONS_${otype}}
+D4P_ENV+=	OPTIONS_${otype}_${m}="${OPTIONS_${otype}_${m}}" \
+		${m}_DESC=""${${m}_DESC:Q}""
+.    for opt in ${OPTIONS_${otype}_${m}}
+D4P_ENV+=	 ${opt}_DESC=""${${opt}_DESC:Q}""
+.    endfor
+.  endfor
+.endfor
+.undef m
+.undef otype
+.undef opt
+.endif # pre-config
+
+.if !target(do-config)
+do-config:
+.if empty(ALL_OPTIONS) && empty(OPTIONS_SINGLE) && empty(OPTIONS_MULTI) && empty(OPTIONS_RADIO) && empty(OPTIONS_GROUP)
+	@${ECHO_MSG} "===> No options to configure"
+.else
+.if ${UID} != 0 && !defined(INSTALL_AS_USER)
+	@optionsdir=${OPTIONS_FILE}; optionsdir=$${optionsdir%/*}; \
+	oldoptionsdir=${OPTIONSFILE}; oldoptionsdir=$${oldoptionsdir%/*}; \
+	${ECHO_MSG} "===>  Switching to root credentials to create $${optionsdir}"; \
+	(${SU_CMD} "${SH} -c \"if [ -d $${oldoptionsdir} -a ! -d $${optionsdir} ]; then ${MV} $${oldoptionsdir} $${optionsdir}; elif [ -d $${oldoptionsdir} -a -d $${optionsdir} ]; then ${RM} -rf $${oldoptionsdir} ; fi ; ${MKDIR} $${optionsdir} 2> /dev/null\"") || \
+		(${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1); \
+	${ECHO_MSG} "===>  Returning to user credentials"
+.else
+	@optionsdir=${OPTIONS_FILE}; optionsdir=$${optionsdir%/*}; \
+	oldoptionsdir=${OPTIONSFILE}; oldoptionsdir=$${oldoptionsdir%/*}; \
+	if [ -d $${oldoptionsdir} -a ! -d $${optionsdir} ]; then \
+		${MV} $${oldoptionsdir} $${optionsdir}; \
+	elif [ -d $${oldoptionsdir} -a -d $${optionsdir} ]; then \
+		${RM} -rf $${oldoptionsdir} ; \
+	fi ; \
+	${MKDIR} $${optionsdir} 2> /dev/null || \
+	(${ECHO_MSG} "===> Cannot create $${optionsdir}, check permissions"; exit 1)
+.endif
+	@TMPOPTIONSFILE=$$(mktemp -t portoptions); \
+	trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \
+	${SETENV} ${D4P_ENV} ${SH} ${SCRIPTSDIR}/dialog4ports.sh $${TMPOPTIONSFILE} || { \
+		${RM} -f $${TMPOPTIONSFILE}; \
+		${ECHO_MSG} "===> Options unchanged"; \
+		exit 0; \
+	}; \
+	${ECHO_CMD}; \
+	if [ ! -e $${TMPOPTIONSFILE} ]; then \
+		${ECHO_MSG} "===> No user-specified options to save for ${PKGNAME}"; \
+		exit 0; \
+	fi; \
+	SELOPTIONS=$$(${CAT} $${TMPOPTIONSFILE}); \
+	${RM} -f $${TMPOPTIONSFILE}; \
+	TMPOPTIONSFILE=$$(mktemp -t portoptions); \
+	trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \
+	${ECHO_CMD} "# This file is auto-generated by 'make config'." > $${TMPOPTIONSFILE}; \
+	${ECHO_CMD} "# Options for ${PKGNAME}" >> $${TMPOPTIONSFILE}; \
+	${ECHO_CMD} "_OPTIONS_READ=${PKGNAME}" >> $${TMPOPTIONSFILE}; \
+	${ECHO_CMD} "_FILE_COMPLETE_OPTIONS_LIST=${COMPLETE_OPTIONS_LIST}" >> $${TMPOPTIONSFILE}; \
+	for i in ${COMPLETE_OPTIONS_LIST}; do \
+		if ${ECHO_CMD} $${SELOPTIONS} | ${GREP} -qw $${i}; then \
+			${ECHO_CMD} "OPTIONS_FILE_SET+=$${i}" >> $${TMPOPTIONSFILE}; \
+		else \
+			${ECHO_CMD} "OPTIONS_FILE_UNSET+=$${i}" >> $${TMPOPTIONSFILE}; \
+		fi; \
+	done; \
+	if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \
+		${ECHO_MSG} "===>  Switching to root credentials to write ${OPTIONS_FILE}"; \
+		${SU_CMD} "${CAT} $${TMPOPTIONSFILE} > ${OPTIONS_FILE}"; \
+		${ECHO_MSG} "===>  Returning to user credentials"; \
+	else \
+		${CAT} $${TMPOPTIONSFILE} > ${OPTIONS_FILE}; \
+	fi; \
+	${RM} -f $${TMPOPTIONSFILE}
+	@cd ${.CURDIR} && ${MAKE} sanity-config
+.endif
+.endif # do-config
+
+.if !target(config)
+.if !defined(NO_DIALOG)
+config: pre-config do-config
+.else
+config:
+	@${ECHO_MSG} "===> Skipping 'config' as NO_DIALOG is defined"
+.endif
+.endif # config
+
+.if !target(config-recursive)
+config-recursive:
+	@${ECHO_MSG} "===> Setting user-specified options for ${PKGNAME} and dependencies";
+	@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+		(cd $$dir; ${MAKE} config-conditional); \
+	done
+.endif # config-recursive
+
+.if !target(config-conditional)
+config-conditional:
+.if !empty(NEW_OPTIONS)
+	@cd ${.CURDIR} && ${MAKE} config;
+.endif
+.endif # config-conditional
+
+.if !target(showconfig)
+.include "${PORTSDIR}/Mk/bsd.options.desc.mk"
+MULTI_EOL=	: you have to choose at least one of them
+SINGLE_EOL=	: you have to select exactly one of them
+RADIO_EOL=	: you can only select none or one of them
+showconfig:
+.if !empty(COMPLETE_OPTIONS_LIST)
+	@${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME}":
+.for opt in ${ALL_OPTIONS}
+	@[ -z "${PORT_OPTIONS:M${opt}}" ] || match="on" ; ${ECHO_MSG} -n "     ${opt}=$${match:-off}"
+.  if !empty(${opt}_DESC)
+	@${ECHO_MSG} -n ": "${${opt}_DESC:Q}
+.  endif
+	@${ECHO_MSG} ""
+.endfor
+
+#multi and conditional multis
+.for otype in MULTI GROUP SINGLE RADIO
+.  for m in ${OPTIONS_${otype}}
+.    if empty(${m}_DESC)
+		@${ECHO_MSG} "====> Options available for the ${otype:L} ${m}${${otype}_EOL}"
+.    else
+		@${ECHO_MSG} "====> ${${m}_DESC}${${otype}_EOL}"
+.    endif
+.    for opt in ${OPTIONS_${otype}_${m}}
+	@[ -z "${PORT_OPTIONS:M${opt}}" ] || match="on" ; ${ECHO_MSG} -n "     ${opt}=$${match:-off}"
+.      if !empty(${opt}_DESC)
+	@${ECHO_MSG} -n ": "${${opt}_DESC:Q}
+.      endif
+	@${ECHO_MSG} ""
+.    endfor
+.  endfor
+.endfor
+
+.undef otype
+.undef m
+.undef opt
+	@${ECHO_MSG} "===> Use 'make config' to modify these settings"
+.endif
+.endif # showconfig
+
+.if !target(showconfig-recursive)
+showconfig-recursive:
+	@${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME} and dependencies";
+	@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+		(cd $$dir; ${MAKE} showconfig); \
+	done
+.endif # showconfig-recursive
+
+.if !target(rmconfig)
+rmconfig:
+.if exists(${OPTIONSFILE})
+	-@${ECHO_MSG} "===> Removing user-configured options for ${PKGNAME}"; \
+	optionsdir=${OPTIONSFILE}; optionsdir=$${optionsdir%/*}; \
+	if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \
+		${ECHO_MSG} "===> Switching to root credentials to remove ${OPTIONSFILE} and $${optionsdir}"; \
+		${SU_CMD} "${RM} -f ${OPTIONSFILE} ; \
+			${RMDIR} $${optionsdir}"; \
+		${ECHO_MSG} "===> Returning to user credentials"; \
+	else \
+		${RM} -f ${OPTIONSFILE}; \
+		${RMDIR} $${optionsdir} 2>/dev/null || return 0; \
+	fi
+.endif
+.if exists(${OPTIONS_FILE})
+	-@${ECHO_MSG} "===> Removing user-configured options for ${PKGNAME}"; \
+	optionsdir=${OPTIONS_FILE}; optionsdir=$${optionsdir%/*}; \
+	if [ ${UID} != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \
+		${ECHO_MSG} "===> Switching to root credentials to remove ${OPTIONS_FILE} and $${optionsdir}"; \
+		${SU_CMD} "${RM} -f ${OPTIONS_FILE} ; \
+			${RMDIR} $${optionsdir}"; \
+		${ECHO_MSG} "===> Returning to user credentials"; \
+	else \
+		${RM} -f ${OPTIONS_FILE}; \
+		${RMDIR} $${optionsdir} 2>/dev/null || return 0; \
+	fi
+.else
+	@${ECHO_MSG} "===> No user-specified options configured for ${PKGNAME}"
+.endif
+.endif # rmconfig
+
+.if !target(rmconfig-recursive)
+rmconfig-recursive:
+	@${ECHO_MSG} "===> Removing user-specified options for ${PKGNAME} and dependencies";
+	@for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \
+		(cd $$dir; ${MAKE} rmconfig); \
+	done
+.endif # rmconfig-recursive
+
+.if !target(pretty-print-config)
+MULTI_START=	[
+MULTI_END=	]
+GROUP_START=	[
+GROUP_END=	]
+SINGLE_START=	(
+SINGLE_END=	)
+RADIO_START=	(
+RADIO_END=	)
+pretty-print-config:
+.for opt in ${ALL_OPTIONS}
+	@[ -z "${PORT_OPTIONS:M${opt}}" ] || match="+" ; ${ECHO_MSG} -n "$${match:--}${opt} "
+.endfor
+.for otype in MULTI GROUP SINGLE RADIO
+.  for m in ${OPTIONS_${otype}}
+	@${ECHO_MSG} -n "${m}${${otype}_START} "
+.    for opt in ${OPTIONS_${otype}_${m}}
+		@[ -z "${PORT_OPTIONS:M${opt}}" ] || match="+" ; ${ECHO_MSG} -n "$${match:--}${opt} "
+.    endfor
+	@${ECHO_MSG} -n "${${otype}_END} "
+.  endfor
+.endfor
+.undef otype
+.undef m
+.undef opt
+	@${ECHO_MSG} ""
+.endif # pretty-print-config
+
+desktop-categories:
+	@categories=""; \
+	for native_category in ${CATEGORIES}; do \
+		c=""; \
+		case $$native_category in \
+			accessibility)	c="Utility Accessibility"		;; \
+			archivers)		c="Utility Archiving"			;; \
+			astro)			c="Education Science Astronomy"	;; \
+			audio)			c="AudioVideo Audio"			;; \
+			benchmarks)		c="System"						;; \
+			biology)		c="Education Science Biology"	;; \
+			cad)			c="Graphics Engineering"		;; \
+			comms)			c="Utility"						;; \
+			converters)		c="Utility"						;; \
+			databases)		c="Office Database"				;; \
+			deskutils)		c="Utility"						;; \
+			devel)			c="Development"					;; \
+			dns)			c="Network"						;; \
+			elisp)			c="Development"					;; \
+			editors)		c="Utility"						;; \
+			emulators)		c="System Emulator"				;; \
+			finance)		c="Office Finance"				;; \
+			ftp)			c="Network FileTransfer"		;; \
+			games)			c="Game"						;; \
+			geography)		c="Education Science Geography"	;; \
+			gnome)			c="GNOME GTK"					;; \
+			graphics)		c="Graphics"					;; \
+			hamradio)		c="HamRadio"					;; \
+			haskell)		c="Development"					;; \
+			irc)			c="Network IRCClient"			;; \
+			java)			c="Development Java"			;; \
+			kde)			c="KDE Qt"						;; \
+			lang)			c="Development"					;; \
+			lisp)			c="Development"					;; \
+			mail)			c="Office Email"				;; \
+			mate)			c="MATE GTK"		;; \
+			math)			c="Education Science Math"		;; \
+			mbone)			c="Network AudioVideo"			;; \
+			multimedia)		c="AudioVideo"					;; \
+			net)			c="Network"						;; \
+			net-im)			c="Network InstantMessaging"	;; \
+			net-mgmt)		c="Network"						;; \
+			net-p2p)		c="Network P2P"					;; \
+			news)			c="Network News"				;; \
+			palm)			c="Office PDA"					;; \
+			parallel)		c="ParallelComputing"			;; \
+			pear)			c="Development WebDevelopment"	;; \
+			perl5)			c="Development"					;; \
+			python)			c="Development"					;; \
+			ruby)			c="Development"					;; \
+			rubygems)		c="Development"					;; \
+			scheme)			c="Development"					;; \
+			science)		c="Science Education"			;; \
+			security)		c="System Security"				;; \
+			shells)			c="System Shell"				;; \
+			sysutils)		c="System"						;; \
+			tcl*|tk*)		c="Development"					;; \
+			textproc)		c="Utility TextTools"			;; \
+			www)			c="Network"						;; \
+			x11-clocks)		c="Utility Clock"				;; \
+			x11-fm)			c="System FileManager"			;; \
+			xfce)			c="GTK XFCE"					;; \
+			zope)			c="Development WebDevelopment"	;; \
+		esac; \
+		if [ -n "$$c" ]; then \
+			categories="$$categories $$c"; \
+		fi; \
+	done; \
+	if [ -n "$$categories" ]; then \
+		for c in $$categories; do ${ECHO_MSG} "$$c"; done \
+			| ${SORT} -u | ${TR} '\n' ';'; \
+		${ECHO_MSG}; \
+	fi
+
+# http://standards.freedesktop.org/menu-spec/menu-spec-latest.html
+DESKTOP_CATEGORIES_MAIN=	AudioVideo Audio Video Development Education \
+	Game Graphics Network Office Science Settings System Utility
+DESKTOP_CATEGORIES_ADDITIONAL=	Building Debugger IDE GUIDesigner Profiling \
+	RevisionControl Translation Calendar ContactManagement Database \
+	Dictionary Chart Email Finance FlowChart PDA ProjectManagement \
+	Presentation Spreadsheet WordProcessor 2DGraphics VectorGraphics \
+	RasterGraphics 3DGraphics Scanning OCR Photography Publishing Viewer \
+	TextTools DesktopSettings HardwareSettings Printing PackageManager \
+	Dialup InstantMessaging Chat IRCClient Feed FileTransfer HamRadio News \
+	P2P RemoteAccess Telephony TelephonyTools VideoConference WebBrowser \
+	WebDevelopment Midi Mixer Sequencer Tuner TV AudioVideoEditing Player \
+	Recorder DiscBurning ActionGame AdventureGame ArcadeGame BoardGame \
+	BlocksGame CardGame KidsGame LogicGame RolePlaying Shooter Simulation \
+	SportsGame StrategyGame Art Construction Music Languages \
+	ArtificialIntelligence Astronomy Biology Chemistry ComputerScience \
+	DataVisualization Economy Electricity Geography Geology Geoscience \
+	History Humanities ImageProcessing Literature Maps Math \
+	NumericalAnalysis MedicalSoftware Physics Robotics Spirituality Sports \
+	ParallelComputing Amusement Archiving Compression Electronics Emulator \
+	Engineering FileTools FileManager TerminalEmulator Filesystem Monitor \
+	Security Accessibility Calculator Clock TextEditor Documentation Adult \
+	Core KDE GNOME MATE XFCE GTK Qt Motif Java ConsoleOnly
+DESKTOP_CATEGORIES_RESERVED=	Screensaver TrayIcon Applet Shell
+
+VALID_DESKTOP_CATEGORIES+=	${DESKTOP_CATEGORIES_MAIN} \
+	${DESKTOP_CATEGORIES_ADDITIONAL} \
+	${DESKTOP_CATEGORIES_RESERVED}
+
+.if defined(DESKTOP_ENTRIES)
+check-desktop-entries:
+	@set -- ${DESKTOP_ENTRIES} XXX; \
+	if [ `${EXPR} \( $$# - 1 \) % 6` -ne 0 ]; then \
+		${ECHO_MSG} "${PKGNAME}: Makefile error: the DESKTOP_ENTRIES list must contain one or more groups of 6 elements"; \
+		exit 1; \
+	fi; \
+	num=1; \
+	while [ $$# -gt 6 ]; do \
+		entry="#$$num"; \
+		if [ -n "$$4" ]; then \
+			entry="$$entry ($$4)"; \
+		elif [ -n "$$1" ]; then \
+			entry="$$entry ($$1)"; \
+		fi; \
+		if [ -z "$$1" ]; then \
+			${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 1 (Name) is empty"; \
+			exit 1; \
+		fi; \
+		if ${ECHO_CMD} "$$3" | ${GREP} -iq '.\(png\|svg\|xpm\)$$'; then \
+			if ! ${ECHO_CMD} "$$3" | ${GREP} -iq '^/'; then \
+				${ECHO_MSG} "${PKGNAME}: Makefile warning: in desktop entry $$entry: field 3 (Icon) should be either absolute path or icon name without extension if installed icons follow Icon Theme Specification"; \
+			fi; \
+		fi; \
+		if [ -z "$$4" ]; then \
+			${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 4 (Exec) is empty"; \
+			exit 1; \
+		fi; \
+		if [ -n "$$5" ]; then \
+			for c in `${ECHO_CMD} "$$5" | ${TR} ';' ' '`; do \
+				if ! ${ECHO_CMD} ${VALID_DESKTOP_CATEGORIES} | ${GREP} -wq $$c; then \
+					${ECHO_CMD} "${PKGNAME}: Makefile warning: in desktop entry $$entry: category $$c is not a valid desktop category"; \
+				fi; \
+			done; \
+			if ! ${ECHO_CMD} "$$5" | ${GREP} -q "`${ECHO_CMD} ${DESKTOP_CATEGORIES_MAIN} | ${SED} -E 's,[[:blank:]]+,\\\|,g'`"; then \
+				${ECHO_CMD} "${PKGNAME}: Makefile warning: in desktop entry $$entry: field 5 (Categories) must contain at least one main desktop category (make -VDESKTOP_CATEGORIES_MAIN)"; \
+			fi; \
+			if ! ${ECHO_CMD} "$$5" | ${GREP} -q ';$$'; then \
+				${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) does not end with a semicolon"; \
+				exit 1; \
+			fi; \
+		else \
+			if [ -z "`cd ${.CURDIR} && ${MAKE} desktop-categories`" ]; then \
+				${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) is empty and could not be deduced from the CATEGORIES variable"; \
+				exit 1; \
+			fi; \
+		fi; \
+		if [ "x$$6" != "xtrue" ] && [ "x$$6" != "xfalse" ] && [ "x$$6" != "x" ]; then \
+			${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is not \"true\", \"false\" or \"\"(empty)"; \
+			exit 1; \
+		fi; \
+		shift 6; \
+		num=`${EXPR} $$num + 1`; \
+	done
+.endif
+
+.if !target(install-desktop-entries)
+.if defined(DESKTOP_ENTRIES)
+install-desktop-entries:
+	@set -- ${DESKTOP_ENTRIES} XXX; \
+	if [ -z "${_DESKTOPDIR_REL}" ]; then \
+		${ECHO_CMD} "@cwd ${DESKTOPDIR}" >> ${TMPPLIST}; \
+	fi; \
+	while [ $$# -gt 6 ]; do \
+		filename="`${ECHO_CMD} "$$4" | ${SED} -e 's,^/,,g;s,[/ ],_,g;s,[^_[:alnum:]],,g'`.desktop"; \
+		pathname="${STAGEDIR}${DESKTOPDIR}/$$filename"; \
+		categories="$$5"; \
+		if [ -z "$$categories" ]; then \
+			categories="`cd ${.CURDIR} && ${MAKE} desktop-categories`"; \
+		fi; \
+		${ECHO_CMD} "${_DESKTOPDIR_REL}$$filename" >> ${TMPPLIST}; \
+		${ECHO_CMD} "[Desktop Entry]" > $$pathname; \
+		${ECHO_CMD} "Type=Application" >> $$pathname; \
+		${ECHO_CMD} "Version=1.0" >> $$pathname; \
+		${ECHO_CMD} "Name=$$1" >> $$pathname; \
+		comment="$$2"; \
+		if [ -z "$$2" ]; then \
+			comment="`cd ${.CURDIR} && ${MAKE} -VCOMMENT`"; \
+		fi; \
+		${ECHO_CMD} "GenericName=$$comment" >> $$pathname; \
+		${ECHO_CMD} "Comment=$$comment" >> $$pathname; \
+		if [ -n "$$3" ]; then \
+			${ECHO_CMD} "Icon=$$3" >> $$pathname; \
+		fi; \
+		${ECHO_CMD} "Exec=$$4" >> $$pathname; \
+		${ECHO_CMD} "Categories=$$categories" >> $$pathname; \
+		if [ -n "$$6" ]; then \
+			${ECHO_CMD} "StartupNotify=$$6" >> $$pathname; \
+		fi; \
+		shift 6; \
+	done; \
+	if [ -z "${_DESKTOPDIR_REL}" ]; then \
+		${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \
+	fi
+.endif
+.endif
+
+.if defined(WARNING)
+WARNING_WAIT?=	10
+show-warnings:
+	@${ECHO_MSG} "/!\\ WARNING /!\\"
+.for m in ${WARNING}
+	@${ECHO_MSG} "${m}"
+.endfor
+	@${ECHO_MSG}
+	@sleep ${WARNING_WAIT}
+.endif
+
+.if defined(DEVELOPER)
+.if defined(DEV_WARNING)
+DEV_WARNING_WAIT?=	10
+show-dev-warnings:
+	@${ECHO_MSG} "/!\\ ${PKGNAME}: Makefile warnings, please consider fixing /!\\"
+	@${ECHO_MSG}
+.for m in ${DEV_WARNING}
+	@${ECHO_MSG} "${m}"
+.endfor
+	@${ECHO_MSG}
+	@sleep ${DEV_WARNING_WAIT}
+.endif
+
+.if defined(DEV_ERROR)
+show-dev-errors:
+	@${ECHO_MSG} "/!\\ ${PKGNAME}: Makefile errors /!\\"
+	@${ECHO_MSG}
+.for m in ${DEV_ERROR}
+	@${ECHO_MSG} "${m}"
+.endfor
+	@${ECHO_MSG}
+	@${FALSE}
+.endif
+.endif #DEVELOPER
+
+# Please note that the order of the following targets is important, and
+# should not be modified.
+
+_TARGETS_STAGES=	SANITY PKG FETCH EXTRACT PATCH CONFIGURE BUILD INSTALL PACKAGE
+.if !defined(NO_STAGE)
+_TARGETS_STAGES+=	STAGE
+.endif
+
+_SANITY_SEQ=	post-chroot pre-everything check-makefile \
+				show-warnings show-dev-warnings show-dev-errors \
+				check-categories check-makevars check-desktop-entries \
+				check-depends identify-install-conflicts check-deprecated \
+				check-vulnerable check-license check-config buildanyway-message \
+				options-message
+
+_PKG_DEP=		check-sanity
+_PKG_SEQ=		pkg-depends
+_FETCH_DEP=		pkg
+_FETCH_SEQ=		fetch-depends pre-fetch pre-fetch-script \
+				do-fetch fetch-specials post-fetch post-fetch-script
+_EXTRACT_DEP=	fetch
+_EXTRACT_SEQ=	check-build-conflicts extract-message checksum extract-depends \
+				pre-extract pre-extract-script do-extract \
+				post-extract post-extract-script
+_PATCH_DEP=		extract
+_PATCH_SEQ=		ask-license patch-message patch-depends pathfix-pre-patch dos2unix fix-shebang \
+				pre-patch \
+				pre-patch-script do-patch charsetfix-post-patch post-patch post-patch-script
+_CONFIGURE_DEP=	patch
+_CONFIGURE_SEQ=	build-depends lib-depends configure-message run-autotools-fixup \
+				configure-autotools pre-configure pre-configure-script \
+				run-autotools patch-libtool do-configure post-configure \
+				post-configure-script
+_BUILD_DEP=		configure
+_BUILD_SEQ=		build-message pre-build pre-build-script do-build \
+				post-build post-build-script
+.if !defined(NO_STAGE)
+
+_STAGE_DEP=		build
+_STAGE_SEQ=		stage-message stage-dir run-depends lib-depends apply-slist pre-install generate-plist \
+				pre-su-install
+.if defined(NEED_ROOT)
+_STAGE_SUSEQ=	create-users-groups do-install desktop-file-post-install kmod-post-install \
+				shared-mime-post-install webplugin-post-install \
+				post-install post-install-script move-uniquefiles post-stage compress-man \
+				install-rc-script install-ldconfig-file install-license \
+				install-desktop-entries add-plist-info add-plist-docs add-plist-examples \
+				add-plist-data add-plist-post move-uniquefiles-plist fix-plist-sequence
+.if defined(DEVELOPER)
+_STAGE_SUSEQ+=	stage-qa
+.endif
+.else
+_STAGE_SEQ+=	create-users-groups do-install desktop-file-post-install kmod-post-install \
+				shared-mime-post-install webplugin-post-install post-install post-install-script \
+				move-uniquefiles post-stage compress-man install-rc-script install-ldconfig-file \
+				install-license install-desktop-entries add-plist-info add-plist-docs \
+				add-plist-examples add-plist-data add-plist-post move-uniquefiles-plist \
+				fix-plist-sequence
+.if defined(DEVELOPER)
+_STAGE_SEQ+=	stage-qa
+.endif
+.endif
+.if defined(WITH_PKGNG)
+_INSTALL_DEP=	stage
+_INSTALL_SEQ=	install-message run-depends lib-depends check-already-installed
+_INSTALL_SUSEQ=	fake-pkg security-check
+
+_PACKAGE_DEP=	stage
+_PACKAGE_SEQ=	package-message pre-package pre-package-script do-package post-package-script
+
+.else # pkg_install
+
+_PACKAGE_DEP=	stage
+_PACKAGE_SEQ=	package-message pre-package pre-package-script do-package post-package-script
+
+_INSTALL_DEP=	package
+_INSTALL_SEQ=	install-message run-depends lib-depends check-already-installed
+_INSTALL_SUSEQ=	install-package security-check
+.endif
+
+.else # NO_STAGE
+
+_INSTALL_DEP=	build
+_INSTALL_SEQ=	install-message check-install-conflicts run-depends lib-depends apply-slist pre-install \
+				pre-install-script generate-plist check-already-installed
+_INSTALL_SUSEQ= check-umask install-mtree pre-su-install \
+				pre-su-install-script create-users-groups do-install \
+				install-desktop-entries install-license install-rc-script \
+				desktop-file-post-install kmod-post-install shared-mime-post-install webplugin-post-install \
+				post-install post-install-script add-plist-buildinfo \
+				add-plist-info add-plist-docs add-plist-examples \
+				add-plist-data add-plist-post fix-plist-sequence \
+				compress-man install-ldconfig-file fake-pkg security-check
+_PACKAGE_DEP=	install
+_PACKAGE_SEQ=	package-message pre-package pre-package-script \
+				do-package post-package-script
+.endif
+
+# Enforce order for -jN builds
+
+.for _t in ${_TARGETS_STAGES}
+.  for s in ${_${_t}_SEQ}
+.    if target(${s})
+.      if ! ${NOTPHONY:M${s}}
+_PHONY_TARGETS+= ${s}
+.      endif
+_${_t}_REAL_SEQ+=	${s}
+.    endif
+.  endfor
+.  for s in ${_${_t}_SUSEQ}
+.    if target(${s})
+.      if ! ${NOTPHONY:M${s}}
+_PHONY_TARGETS+= ${s}
+.       endif
+_${_t}_REAL_SUSEQ+=	${s}
+.    endif
+.  endfor
+.ORDER: ${_${_t}_DEP} ${_${_t}_REAL_SEQ}
+.endfor
+
+.for target in extract patch configure build stage install package
+
+.if !target(${target}) && defined(_OPTIONS_OK)
+_PHONY_TARGETS+= ${target}
+${target}: ${${target:U}_COOKIE}
+.elif !target(${target})
+${target}: config-conditional
+	@cd ${.CURDIR} && ${MAKE} CONFIG_DONE_${UNIQUENAME:U}=1 ${${target:U}_COOKIE}
+.elif target(${target}) && defined(IGNORE)
+.endif
+
+.if !exists(${${target:U}_COOKIE})
+
+.if ${UID} != 0 && defined(_${target:U}_REAL_SUSEQ) && !defined(INSTALL_AS_USER)
+.if defined(USE_SUBMAKE)
+${${target:U}_COOKIE}: ${_${target:U}_DEP}
+	@cd ${.CURDIR} && ${MAKE} ${_${target:U}_REAL_SEQ}
+.else
+${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_REAL_SEQ}
+.endif
+	@${ECHO_MSG} "===>  Switching to root credentials for '${target}' target"
+	@cd ${.CURDIR} && \
+		${SU_CMD} "${MAKE} ${_${target:U}_REAL_SUSEQ}"
+	@${ECHO_MSG} "===>  Returning to user credentials"
+	@${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
+.elif defined(USE_SUBMAKE)
+${${target:U}_COOKIE}: ${_${target:U}_DEP}
+	@cd ${.CURDIR} && \
+		${MAKE} ${_${target:U}_REAL_SEQ} ${_${target:U}_REAL_SUSEQ}
+	@${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
+.else
+${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_REAL_SEQ} ${_${target:U}_REAL_SUSEQ}
+	@${TOUCH} ${TOUCH_FLAGS} ${.TARGET}
+.endif
+
+.else
+${${target:U}_COOKIE}::
+	@if [ -e ${.TARGET} ]; then \
+		${DO_NADA}; \
+	else \
+		cd ${.CURDIR} && ${MAKE} ${.TARGET}; \
+	fi
+.endif
+
+.endfor
+
+.PHONY: ${_PHONY_TARGETS} check-sanity fetch pkg
+
+.if !target(check-sanity)
+check-sanity: ${_SANITY_REAL_SEQ}
+.endif
+
+.if !target(fetch)
+fetch: ${_FETCH_DEP} ${_FETCH_REAL_SEQ}
+.endif
+
+.if !target(pkg)
+pkg: ${_PKG_DEP} ${_PKG_REAL_SEQ}
+.endif
+
+.endif
+# End of post-makefile section.
+
+.endif
+# End of the DESTDIR if statement