diff options
Diffstat (limited to 'Mk/bsd.port.mk')
| -rw-r--r-- | Mk/bsd.port.mk | 6113 |
1 files changed, 0 insertions, 6113 deletions
diff --git a/Mk/bsd.port.mk b/Mk/bsd.port.mk deleted file mode 100644 index 052301783..000000000 --- a/Mk/bsd.port.mk +++ /dev/null @@ -1,6113 +0,0 @@ -#-*- mode: makefile; tab-width: 4; -*- -# ex:ts=4 -# -# $FreeBSD$ -# $NetBSD: $ -# -# bsd.port.mk - 940820 Jordan K. Hubbard. -# This file is in the public domain. -# -# Please view me with 4 column tabs! - -# This is the master file for the most common elements to all port -# Makefile in the ports system. For a more general overview of its -# use and importance, see the Porter's Handbook. - -# There are two different types of "maintainers" in the ports framework. -# The maintainer alias of the bsd.port.mk file is listed below in the -# FreeBSD_MAINTAINER entry. You should consult them if you have any -# questions/suggestions regarding this file. -# -# DO NOT COMMIT CHANGES TO THIS FILE BY YOURSELF, EVEN IF YOU DID NOT GET -# A RESPONSE FROM THE MAINTAINER(S) WITHIN A REASONABLE TIMEFRAME! ALL -# UNAUTHORISED CHANGES WILL BE UNCONDITIONALLY REVERTED! - -FreeBSD_MAINTAINER= portmgr@FreeBSD.org - -# For each port, the MAINTAINER variable is what you should consult for -# contact information on the person(s) to contact if you have questions/ -# suggestions about that specific port. By default (if no MAINTAINER -# is listed), a port is maintained by the subscribers of the ports@FreeBSD.org -# mailing list, and any correspondence should be directed there. -# -# MAINTAINER - The e-mail address of the contact person for this port. -# Default: ports@FreeBSD.org -# -# These are meta-variables that are automatically set to the system -# you are running on. These are provided in case you need to take -# different actions for different values. -# -# ARCH - The architecture of the target machine, such as would be -# returned by "uname -p". (Note: Ports should test against -# ARCH, and not the host machine's architecture which is -# MACHINE_ARCH, to enable ports to be cross-built.) -# OPSYS - Portability clause. This is the operating system the -# makefile is being used on. Automatically set to -# "FreeBSD," "NetBSD," or "OpenBSD" as appropriate. -# OSREL - The release version (numeric) of the operating system. -# OSVERSION - The value of __FreeBSD_version. -# -# This is the beginning of the list of all variables that need to be -# defined in a port, listed in order that they should be included -# to fit in with existing conventions. (Exception: MAINTAINER actually -# should appear after EXTRACT_ONLY and before MASTER_SITE_BACKUP). -# -# These variables are used to identify your port. -# -# PORTNAME - Name of software. Mandatory. -# PORTVERSION - Version of software. Mandatory when no DISTVERSION is given. -# PORTREVISION - Version of port. Optional. Commonly used to indicate -# that an update has happened that affects the port -# framework itself, but not the distributed software -# (e.g., local patches or Makefile changes). -# PORTEPOCH - Optional. In certain odd cases, the PORTREVISION logic -# can be fooled by ports that appear to go backwards -# numerically (e.g. if port-0.3 is newer than port-1998). -# In this case, incrementing PORTEPOCH forces the revision. -# Default: 0 (no effect). -# PKGNAME - Always defined as -# ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PORTVERSION}. -# Do not define this in your Makefile. -# PKGNAMEPREFIX - Prefix to specify that port is language-specific, etc. -# Optional. -# PKGNAMESUFFIX - Suffix to specify compilation options. Optional. -# PKGVERSION - Always defined as -# ${PORTVERSION}. -# Do not define this in your Makefile. -# UNIQUENAME - A name for your port that is globally unique. By default, -# this is set to ${LATEST_LINK} when LATEST_LINK is set, -# and to ${PKGNAMEPREFIX}${PORTNAME} otherwise. -# DISTVERSION - Vendor version of the distribution. -# Default: ${PORTVERSION} -# DISTNAME - Name of port or distribution used in generating -# WRKSRC and DISTFILES below. -# Default: -# ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION}${DISTVERSIONSUFFIX} -# CATEGORIES - A list of descriptive categories into which this port falls. -# Mandatory. -# -# These variable describe how to fetch files required for building the port. -# -# DISTFILES - Name(s) of archive file(s) containing distribution. -# Set this to an empty string if the port doesn't require it. -# Default: ${DISTNAME}${EXTRACT_SUFX} -# EXTRACT_SUFX - Suffix for archive names -# You never have to set both DISTFILES and EXTRACT_SUFX. -# Default: .tar.bz2 if USE_BZIP2 is set, .zip if USE_ZIP is -# set, .run if USE_MAKESELF is set, .tar.gz otherwise). -# MASTER_SITES - Primary location(s) for distribution files if not found -# locally. See bsd.sites.mk for common choices for -# MASTER_SITES. -# MASTER_SITE_SUBDIR -# - Subdirectory of MASTER_SITES. Will sometimes need to be -# set to ${PORTNAME} for (e.g.) MASTER_SITE_SOURCEFORGE. -# Only guaranteed to work for choices of ${MASTER_SITES} -# defined in bsd.sites.mk. -# Default: not set. -# PATCHFILES - Name(s) of additional files that contain distribution -# patches. Make will look for them at PATCH_SITES (see below). -# They will automatically be uncompressed before patching if -# the names end with ".gz", ".bz2" or ".Z". -# Default: not set. -# PATCH_SITES - Primary location(s) for distribution patch files -# if not found locally. -# DIST_SUBDIR - Suffix to ${DISTDIR}. If set, all ${DISTFILES} and -# ${PATCHFILES} will be put in this subdirectory of -# ${DISTDIR} (see below). Also they will be fetched in this -# subdirectory from FreeBSD mirror sites. -# ALLFILES - All of ${DISTFILES} and ${PATCHFILES}. -# IGNOREFILES - If set, don't perform checksum checks on these files. -# NOFETCHFILES - If set, don't download these files from the ${MASTER_SITES} -# or ${MASTER_SITE_BACKUP} (but do from -# ${MASTER_SITE_OVERRIDE}) -# EXTRACT_ONLY - If set, a subset of ${DISTFILES} you want to -# actually extract. -# ALWAYS_KEEP_DISTFILES -# - If set, the package building cluster will save the distfiles -# along with the packages. This may be required to comply with -# some licenses, e.g. GPL in some cases. -# Default: not set. -# -# (NOTE: by convention, the MAINTAINER entry (see above) should go here.) -# -# These variables are typically set in /etc/make.conf to indicate -# the user's preferred location to fetch files from. You should -# rarely need to set these. -# -# MASTER_SITE_BACKUP -# - Backup location(s) for distribution files and patch -# files if not found locally and ${MASTER_SITES}/${PATCH_SITES} -# Default: -# ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ -# MASTER_SITE_OVERRIDE -# - If set, override the MASTER_SITES setting with this -# value. -# MASTER_SITE_FREEBSD -# - If set, only use ${MASTER_SITE_BACKUP} for -# MASTER_SITES. -# CD_MOUNTPTS - List of CDROM mountpoints to look for distfiles under. -# This variable supercedes CD_MOUNTPT, which is -# obsolete. -# -# Set these if your port should not be built under certain circumstances. -# These are string variables; you should set them to the reason why -# they are necessary. -# -# RESTRICTED - Prevent the distribution of distfiles and packages to -# the FTP sites or on CDROM (e.g. forbidden by license -# considerations). -# NO_CDROM - Packages and distfiles may not go on CDROM (e.g. must -# not be re-sold) but can go on FTP sites. -# NO_PACKAGE - Port should not be packaged for ftp sites or CDROMs, -# but distfiles can be put on ftp sites and CDROMs. -# FORBIDDEN - Package build should not be attempted because of -# security vulnerabilities. -# IGNORE - Package build should be skipped entirely (e.g. -# because of serious unfixable problems in the build, -# because it cannot be manually fetched, etc). Error -# logs will not appear on pointyhat, so this should be -# used sparingly. -# BROKEN - Port is believed to be broken. Package builds will -# still be attempted on the pointyhat package cluster to -# test this assumption. -# DEPRECATED - Port is deprecated to install. Advisory only. -# EXPIRATION_DATE -# - If DEPRECATED is set, determines a date when -# the port is planed to remove. The date format is -# ISO 8601 (YYYY-MM-DD). -# -# DISABLE_VULNERABILITIES -# - If set, do not check if the port is listed in the -# vulnerabilities database. -# -# In addition to RESTRICTED or NO_CDROM, if only a subset of distfiles -# or patchfiles have redistribution restrictions, set the following -# to the list of such files. -# -# RESTRICTED_FILES -# - List of files that cannot be redistributed. -# Default: "${DISTFILES} ${PATCHFILES}" if RESTRICTED -# or NO_CDROM is set, empty otherwise. -# -# These variables are booleans, so you don't need to set them to the reason. -# -# IS_INTERACTIVE -# - Set this if your port needs to interact with the user -# during any step in a package build. User can then decide -# to skip this port by setting ${BATCH}, or compiling only -# the interactive ports by setting ${INTERACTIVE}. -# Default: not set. -# USE_SUBMAKE - Set this if you want that each of the port's main 6 targets -# (extract, patch, configure, build, install and package) to be -# executed in a separate make(1) process. Useful when one of -# the stages needs to influence make(1) variables of the later -# stages using ${WRKDIR}/Makefile.inc generated on the fly. -# Default: not set. -# -# Set these if your port only makes sense to certain architectures. -# They are lists containing names for them (e.g., "alpha i386"). -# (Defaults: not set.) -# -# ONLY_FOR_ARCHS -# - Only build ports if ${ARCH} matches one of these. -# NOT_FOR_ARCHS - Only build ports if ${ARCH} doesn't match one of these. -# ONLY_FOR_ARCHS_REASON -# ONLY_FOR_ARCHS_REASON_${ARCH} -# - Reason why it's only for ${ONLY_FOR_ARCHS}s -# NOT_FOR_ARCHS_REASON -# NOT_FOR_ARCHS_REASON_${ARCH} -# - Reason why it's not for ${NOT_FOR_ARCHS}s -# IA32_BINARY_PORT -# - Set this instead of ONLY_FOR_ARCHS if the given port -# fetches and installs compiled i386 binaries. -# -# Dependency checking. Use these if your port requires another port -# not in the list below. (Default: empty.) -# -# EXTRACT_DEPENDS -# - A list of "path:dir[:target]" tuples of other ports this -# package depends on in the "extract" stage. "path" is -# the name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the existence -# (if it is a full pathname) or search for it in your -# $PATH (if it is an executable) and go into "dir" to do -# a "make all install" if it's not found. If the third -# field ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. -# PATCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends on in the "patch" stage. "path" is the -# name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the existence -# (if it is a full pathname) or search for it in your -# $PATH (if it is an executable) and go into "dir" to do -# a "make all install" if it's not found. If the third -# field ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. -# FETCH_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends in the "fetch" stage. "path" is the -# name of a file if it starts with a slash (/), an -# executable otherwise. make will test for the -# existence (if it is a full pathname) or search for -# it in your $PATH (if it is an executable) and go -# into "dir" to do a "make all install" if it's not -# found. If the third field ("target") exists, it will -# be used instead of ${DEPENDS_TARGET}. -# BUILD_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends to build (between the "extract" and -# "build" stages, inclusive). The test done to -# determine the existence of the dependency is the -# same as FETCH_DEPENDS. If the third field ("target") -# exists, it will be used instead of ${DEPENDS_TARGET}. -# RUN_DEPENDS - A list of "path:dir[:target]" tuples of other ports this -# package depends to run. The test done to determine -# the existence of the dependency is the same as -# FETCH_DEPENDS. This will be checked during the -# "install" stage and the name of the dependency will -# be put into the package as well. If the third field -# ("target") exists, it will be used instead of -# ${DEPENDS_TARGET}. -# LIB_DEPENDS - A list of "lib:dir[:target]" tuples of other ports this -# package depends on. "lib" is the name of a shared library. -# make will use "ldconfig -r" to search for the library. -# lib can contain extended regular expressions. -# DEPENDS_TARGET -# - The default target to execute when a port is calling a -# dependency. -# Default: install -# -# These variables control options about how a port gets built and/or -# are shorthand notations for common sets of dependencies. -# Use these if your port uses some of the common software packages. By -# convention these should be set to 'yes', although they only need to be -# defined. Defaults: not set, unless explicitly indicated below. -# -# Note: the distinction between the USE_* and WANT_* variables, and the -# WITH_* and WITHOUT_* variables, are that the former are restricted to -# usage inside the ports framework, and the latter are reserved for user- -# settable options. (Setting USE_* in /etc/make.conf is always wrong). -# -# WITH_DEBUG - If set, debugging flags are added to CFLAGS and the -# binaries don't get stripped by INSTALL_PROGRAM. -# Besides, individual ports might add their specific -# to produce binaries for debugging purposes. -# You can override the debug flags that are passed to -# the compiler by setting DEBUG_FLAGS. It is set to -# "-g" at default. -# -# USE_BZIP2 - If set, this port tarballs use bzip2, not gzip, for -# compression. -# USE_ZIP - If set, this port distfile uses zip, not tar w/[bg]zip -# for compression. -# USE_MAKESELF - If set, this port distfile uses makeself, not tar w/[bg]zip -# for compression. -# USE_DOS2UNIX - If set to "YES", remove the ^M from all files -# under ${WRKSRC}. If set to a string, remove in all -# files under ${WRKSRC} with one of these names the ^Ms. -# DOS2UNIX_REGEX -# - Limit the ^M removal to files which name matches -# the regular expression. -# USE_GCC - If set, this port requires this version of gcc, either in -# the system or installed from a port. -# USE_GMAKE - If set, this port uses gmake. -# GMAKE - Set to path of GNU make if not in $PATH. -# Default: gmake -## -# USE_GETOPT_LONG -# - If set, this port uses getopt_long. May be obsolete. -## -# USE_ICONV - If set, this port uses libiconv. -# USE_GETTEXT - If set, this port uses GNU gettext (libintl). -## -# USE_PERL5 - If set, this port uses perl5 in one or more of the extract, -# patch, build, install or run phases. -# USE_PERL5_BUILD -# - If set, this port uses perl5 in one or more of the extract, -# patch, build or install phases. -# USE_PERL5_RUN - If set, this port uses perl5 for running. -# PERL5 - Set to full path of perl5, either in the system or -# installed from a port. -# PERL - Set to full path of perl5, either in the system or -# installed from a port, but without the version number. -# Use this if you need to replace "#!" lines in scripts. -# PERL_VERSION - Full version of perl5 (see below for current value). -# PERL_VER - Short version of perl5 (see below for current value). -# PERL_LEVEL - Perl version as an integer of the form MNNNPP, where -# M is major version, N is minor version, and P is -# the patch level. E.g., PERL_VERSION=5.6.1 would give -# a PERL_LEVEL of 500601. This can be used in comparisons -# to determine if the version of perl is high enough, -# whether a particular dependency is needed, etc. -# PERL_ARCH - Directory name of architecture dependent libraries -# (value: ${ARCH}-freebsd). -# PERL_PORT - Name of the perl port that is installed -# (value: perl5) -# SITE_PERL - Directory name where site specific perl packages go. -# This value is added to PLIST_SUB. -# PERL_MODBUILD - Use Module::Build to configure, build and install port. -## -# USE_GHOSTSCRIPT -# - If set, this port needs ghostscript to both -# build and run. -# USE_GHOSTSCRIPT_BUILD -# - If set, this port needs ghostscript to build. -# USE_GHOSTSCRIPT_RUN -# - If set, this port needs ghostscript to run. -# GHOSTSCRIPT_PORT -# - The port that provides postscript functionality. -# Some installations may wish to override the default -# to specify a version without X11 and/or localized -# versions for their nationality. -# Default: print/ghostscript-gpl -# WITH_GHOSTSCRIPT_AFPL -# - If set, this port uses the AFPL version of the ghostscript -# software instead of the GPL version, which is used otherwise. -# WITH_GHOSTSCRIPT_GNU -# - If set, this port uses the GNU version of the ghostscript -# software instead of the GPL version, which is used otherwise. -## -# USE_BISON - If set, this port uses bison for building. -## -# USE_IMAKE - If set, this port uses imake. Implies USE_X_PREFIX. -# XMKMF - Set to path of `xmkmf' if not in $PATH -# Default: xmkmf -a -# USE_X_PREFIX - If set, this port installs in ${X11BASE}. Implies USE_XLIB. -# USE_XLIB - If set, this port uses the X libraries. In the USE_LINUX -# case the linux X libraries are referenced. -# -# USE_FREETYPE - If set, this port uses the freetype print libraries. -# USE_GL - A list of Mesa or GL related dependencies needed by the port. -# Supported components are: glut, glu, glw, gl and linux. -# If set to "yes", this is equivalent to "glu". Note that -# glut depends on glu, glw and glu depend on gl. -# USE_MOTIF - If set, this port uses a Motif toolkit. Implies USE_XPM. -# NO_OPENMOTIF - If set, this port uses a custom Motif toolkit -# instead of Openmotif. -# Used only when USE_MOTIF is set. -# WANT_LESSTIF - If set, this port uses Lesstif as Motif toolkit. -# Used only when USE_MOTIF is set. Implies -# NO_OPENMOTIF. -## -# USE_SDL - If set, this port uses the sdl libraries. -# See bsd.sdl.mk for more information. -# USE_XPM - If set, this port uses the xpm graphics libraries. -## -# USE_OPENSSL - If set, this port relies on the OpenSSL package. -## -# USE_OPENLDAP - If set, this port uses the OpenLDAP libraries. -# Implies: WANT_OPENLDAP_VER?=23 -# WANT_OPENLDAP_VER -# - Legal values are: 22, 23, 24 -# If set to an unkown value, the port is marked BROKEN. -# WANT_OPENLDAP_SASL -# - If set, the system should use OpenLDAP libraries -# with SASL support. -## -# USE_FAM - If set, this port uses the File Alteration Monitor. -# -# WANT_FAM_SYSTEM -# - Legal values are: gamin (default),fam -# If set to an unknown value, the port is marked IGNORE. -## -# USE_AUTOTOOLS - If set, this port uses various GNU autotools -# (libtool, autoconf, autoheader, automake et al.) -# See bsd.autotools.mk for more details. -## -# USE_SCONS - If set, this port uses the Python-based SCons build system -# See bsd.scons.mk for more details. -## -# USE_EFL - If set, this port use EFL libraries. -# Implies inclusion of bsd.efl.mk. (Also see -# that file for more information on USE_EFL_*). -# USE_JAVA - If set, this port relies on the Java language. -# Implies inclusion of bsd.java.mk. (Also see -# that file for more information on USE_JAVA_*). -# USE_OCAML - If set, this port relies on the OCaml language. -# Implies inclusion of bsd.ocaml.mk. (Also see -# that file for more information on USE_OCAML*). -# USE_PYTHON - If set, this port relies on the Python language. -# Implies inclusion of bsd.python.mk. (Also see -# that file for more information on USE_PYTHON_* -# and USE_PYDISTUTILS). -# USE_RUBY - If set, this port relies on the Ruby language. -# Implies inclusion of bsd.ruby.mk. (Also see -# that file for more information on USE_RUBY_*). -# USE_GNUSTEP - If set, this port relies on the GNUstep system. -# Implies the inclusion of bsd.gnustep.mk. -# (Also see that file for more information on -# USE_GNUSTEP_*). -## -# USE_GNOME - A list of the Gnome dependencies the port has (e.g., -# glib12, gtk12). Implies that the port needs Gnome. -# Implies inclusion of bsd.gnome.mk. See bsd.gnome.mk -# or http://www.FreeBSD.org/gnome/docs/porting.html -# for more details. -## -# USE_LUA - If set, this port uses the Lua library and related -# components. See bsd.lua.mk for more details. -## -# USE_WX - If set, this port uses the WxWidgets library and related -# components. See bsd.wx.mk for more details. -## -# USE_KDEBASE_VER - Set to 3 to use the KDE windowing system. -# Implies inclusion of bsd.kde.mk. -# -# USE_KDELIBS_VER - Set to 3 to use the KDE libraries. -# Implies inclusion of bsd.kde.mk. -# -# USE_QT_VER - Set to 3 or 4 to use the respective version -# of the QT libraries. -# Implies inclusion of bsd.kde.mk. -## -# USE_LINUX - Set to yes to say the port needs the default linux base port. -# Set to value <X>, if the port needs emulators/linux_base-<X>. -# If set to "7", a dependency is registered to emulators/linux_base. -# Implies appropriate settings for STRIP and STRIP_CMD. -# USE_LINUX_PREFIX -# - controls the action of PREFIX (see above). Only use this -# if the port is a linux infrastructure port (e.g. contains libs -# or a sound server which supports the FreeBSD native one), -# use the default or the X11 prefix if it's a leaf port -# (e.g. a game or program). -# Implies NO_MTREE=yes, and, if INSTALLS_SHLIB is defined: -# - USE_LINUX=yes -# - appropriate invocation of the Linux ldconfig -# USE_LINUX_RPM - Set to yes to pull in variables and targets useful to Linux -# RPM ports. -# Implies inclusion of bsd.linux-rpm.mk. -# -# USE_XORG - Set to a list of X.org module dependencies. -# Implies inclusion of bsd.xorg.mk. -# -# AUTOMATIC_PLIST -# - Set to yes to enable automatic packing list generation. -# Currently has no effect unless USE_LINUX_RPM is set. -# -# OVERRIDE_LINUX_BASE_PORT -# - This specifies the default linux base to use, for valid -# values have a look at the description of USE_LINUX. This is -# an user-only variable. Don't use it in any port, it's meant -# to be used in make.conf. -# -# LINUX_BASE_PORT -# - This is a read-only variable, it gets set to a value which is -# usable in *_DEPENDS (e.g. BUILD_DEPENDS=${LINUX_BASE_PORT}). -# It honors USE_LINUX=foo and OVERRIDE_LINUX_BASE_PORT. -# USE_RC_SUBR - If set, the ports startup/shutdown script uses the common -# routines found in etc/rc.subr and may need to -# depend on the sysutils/rc_subr port. -# If this is set to a list of files, these files will be -# automatically added to ${SUB_FILES}, some %%VAR%%'s will -# automatically be expanded, they will be installed in -# ${PREFIX}/etc/rc.d and added to the packing list. -# USE_RCORDER - List of rc.d startup scripts to be called early in the boot -# process. This acts exactly like USE_RC_SUBR except that -# scripts are installed in /etc/rc.d. -# RC_SUBR - Set to path of rc.subr. -# Default: ${LOCALBASE}/etc/rc.subr. -# RC_SUBR_SUFFIX -# - Contains the suffix of installed rc.subr scripts. -## -# USE_APACHE - If set, this port relies on an apache webserver. -# -# USE_CDRTOOLS - If set, this port depends on sysutils/cdrtools, unless -# cdrtools-cjk is present or USE_CDRTOOLS=cjk is set, then -# it depends on sysutils/cdrtools-cjk. -# -# Conflict checking. Use if your port cannot be installed at the same time as -# another package. -# -# CONFLICTS - A list of package name patterns that the port conflicts -# with, separated by blanks. The names may include shell -# pattern meta-characters "*", "?", "[", "]", and "!". -# Example: apache*-1.2* apache*-1.3.[012345] apache-*+ssl_* -# -# Various directory definitions and variables to control them. -# You rarely need to redefine any of these except WRKSRC and NO_WRKSUBDIR. -# -# X11BASE - Where X11 ports install things. -# Default: ${LOCALBASE} -# LOCALBASE - Where non-X11 ports install things. -# Default: /usr/local -# LINUXBASE - Where Linux ports install things. -# Default: /compat/linux -# PREFIX - Where *this* port installs its files. -# Default: ${X11BASE} if USE_X_PREFIX is set, -# ${LINUXBASE} if USE_LINUX_PREFIX is set, -# otherwise ${LOCALBASE} -# -# IGNORE_PATH_CHECKS -# - There are some sanity checks against PREFIX. -# You can disable these checks with defining -# this variable, but this is not recommended! -# Only do this if you really know what you are -# doing. These sanity checks are the following: -# - PREFIX has to be an absolute path. -# - PREFIX can't have a trailing slash. -# -# MASTERDIR - Where the port finds patches, package files, etc. Define -# this is you have two or more ports that share most of the -# files. -# Default: ${.CURDIR} -# PORTSDIR - The root of the ports tree. -# Default: /usr/ports -# DISTDIR - Where to search for and store copies of original sources -# Default: ${PORTSDIR}/distfiles -# PACKAGES - A top level directory where all packages go (rather than -# going locally to each port). -# Default: ${PORTSDIR}/packages -# WRKDIRPREFIX - The place to root the temporary working directory -# hierarchy. -# Default: none -# WRKDIR - A temporary working directory that gets *clobbered* on clean -# Default: ${WRKDIRPREFIX}${.CURDIR}/work -# WRKSRC - A subdirectory of ${WRKDIR} where the distribution actually -# unpacks to. -# Default: ${WRKDIR}/${DISTNAME} unless NO_WRKSUBDIR is set, -# in which case simply ${WRKDIR} -# NO_WRKSUBDIR - Assume port unpacks directly into ${WRKDIR}. -# PATCHDIR - A directory containing any additional patches you made -# to port this software to FreeBSD. -# Default: ${MASTERDIR}/files -# SCRIPTDIR - A directory containing any auxiliary scripts -# Default: ${MASTERDIR}/scripts -# FILESDIR - A directory containing any miscellaneous additional files. -# Default: ${MASTERDIR}/files -# PKGDIR - A directory containing any package creation files. -# Default: ${MASTERDIR} -# -# Variables that serve as convenient "aliases" for your *-install targets. -# Use these like: "${INSTALL_PROGRAM} ${WRKSRC}/prog ${PREFIX}/bin". -# -# INSTALL_PROGRAM -# - A command to install binary executables. (By -# default, also strips them, unless ${STRIP} is -# overridden to be the empty string). -# INSTALL_SCRIPT -# - A command to install executable scripts. -# INSTALL_DATA - A command to install sharable data. -# INSTALL_MAN - A command to install manpages. May or not compress, -# depending on the value of MANCOMPRESSED (see below). -# -# Boolean to control whether manpages are installed. -# -# NO_INSTALL_MANPAGES -# - If set, this port doesn't want to install any manpages. -# Default: not set, i.e. manpages are installed by default. -# -# Set the following to specify all manpages that your port installs. -# These manpages will be automatically listed in ${PLIST}. Depending -# on the setting of NOMANCOMPRESS, the make rules will compress the -# manpages for you. -# -# MAN<sect> - A list of manpages, categorized by section. For -# example, if your port has "man/man1/foo.1" and -# "man/mann/bar.n", set "MAN1=foo.1" and "MANN=bar.n". -# The available sections chars are "123456789LN". -# MAN<sect>_<lang> -# - If your port does not install all man pages for all -# languages in MANLANG, language specific pages for -# a language can be specified with this. For example, -# if the port installs foo.1 in English, Japanese, and -# German, bar.1 in English only, and baz.3 in German -# only, set -# MANLANG= "" de ja -# MAN1= foo.1 -# MAN1_EN= bar.1 -# MAN3_DE= baz.3 -# MLINKS - A list of <source, target> tuples for creating links -# for manpages. For example, "MLINKS= a.1 b.1 c.3 d.3" -# will do an "ln -sf a.1 b.1" and "ln -sf c.3 d.3" in -# appropriate directories. (Use this even if the port -# installs its own manpage links so they will show up -# correctly in ${PLIST}.) -# MANPREFIX - The directory prefix for ${MAN<sect>} and ${MLINKS}. -# Default: ${PREFIX} -# MAN<sect>PREFIX -# - If manual pages of some sections install in different -# locations than others, use these. -# Default: ${MANPREFIX} -# MANCOMPRESSED - This variable can take values "yes", "no" or -# "maybe". "yes" means manpages are installed -# compressed; "no" means they are not; "maybe" means -# it changes depending on the value of NOMANCOMPRESS. -# Default: "yes" if USE_IMAKE is set and NO_INSTALL_MANPAGES -# is not set, and "no" otherwise. -# -# Set the following to specify all .info files your port installs. -# -# INFO - A list of .info files (omitting the trailing ".info"); -# only one entry per document! These files are listed in -# the path relative to ${INFO_PATH}. -# INFO_PATH - Path, where all .info files will be installed by your -# port, relative to ${PREFIX} -# Default: "share/info" if ${PREFIX} is equal to /usr -# and "info" otherwise. -# -# Set the following to specify all documentation your port installs into -# ${DOCSDIR} -# -# PORTDOCS - A list of files and directories relative to DOCSDIR. -# Shell glob patterns can be used, directories include -# the entire subtree of contained files and directories. -# Should not be set when no documentation files are -# installed (for example because NOPORTDOCS is defined). -# Useful for dynamically generated documentation. -# -# Set the following to specify all documentation your port installs into -# ${EXAMPLESDIR} -# -# PORTEXAMPLES - A list of files and directories relative to EXAMPLESDIR. -# Shell glob patterns can be used, directories include -# the entire subtree of contained files and directories. -# Should not be set when no examples files are -# installed (for example because NOPORTEXAMPLES is defined). -# Useful for dynamically generated examples. -# -# Set the following to specify all documentation your port installs into -# ${DATADIR} -# -# PORTDATA - A list of files and directories relative to DATADIR. -# Shell glob patterns can be used, directories include -# the entire subtree of contained files and directories. -# Should not be set when no data files are -# installed (for example because NOPORTDATA is defined). -# Useful for dynamically generated data files. -# -# Default targets and their behaviors: -# -# fetch - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this -# port. -# fetch-list - Show list of commands to retrieve missing ${DISTFILES} and -# ${PATCHFILES} for this port. -# fetch-recursive -# - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this -# port and dependencies. -# fetch-recursive-list -# - Show list of commands to retrieve missing ${DISTFILES} and -# ${PATCHFILES} for this port and dependencies. -# fetch-required -# - Retrieves missing ${DISTFILES} and ${PATCHFILES} for this -# port and dependencies. -# fetch-required-list -# - Show list of commands to retrieve missing ${DISTFILES} and -# ${PATCHFILES} for this port and dependencies. -# fetch-url-list -# - Show list of URLS to retrieve missing ${DISTFILES} and -# ${PATCHFILES} for this port. -# fetch-urlall-list -# - Show list of URLS to retrieve ${DISTFILES} and -# ${PATCHFILES} for this port. -# -# all-depends-list -# - Show all directories which are dependencies -# for this port. -# build-depends-list -# - Show all directories which are build-dependencies -# for this port. -# package-depends-list -# - Show all directories which are package-dependencies -# for this port. This is based upon the dependency -# tree as recorded in the Makefiles of the ports -# collection, not as recorded in the currently -# installed ports. -# actual-package-depends-list -# - Like package-depends-list but with the difference -# that the dependencies of the currently installed -# ports are used instead of the dependencies as -# recorded in the ports collection. -# run-depends-list -# - Show all directories which are run-dependencies -# for this port. -# -# extract - Unpacks ${DISTFILES} into ${WRKDIR}. -# patch - Apply any provided patches to the source. -# configure - Runs either GNU configure, one or more local configure -# scripts or nothing, depending on what's available. -# build - Actually compile the sources. -# install - Install the results of a build. -# reinstall - Install the results of a build, ignoring "already installed" -# flag. -# deinstall - Remove the installation. -# deinstall-all - Remove all installations with the same PKGORIGIN. -# package - Create a package from an _installed_ port. -# package-recursive -# - Create a package for a port and _all_ of its dependancies. -# describe - Try to generate a one-line description for each port for -# use in INDEX files and the like. -# checkpatch - Do a "patch -C" instead of a "patch". Note that it may -# give incorrect results if multiple patches deal with -# the same file. -# checksum - Use distinfo to ensure that your distfiles are valid. -# checksum-recursive -# - Run checksum in this port and all dependencies. -# makesum - Generate distinfo (only do this for your own ports!). -# clean - Remove ${WRKDIR} and other temporary files used for building. -# clean-depends - Do a "make clean" for all dependencies. -# config - Configure options for this port (using ${DIALOG}). -# Automatically run prior to extract, patch, configure, build, -# install, and package. -# config-recursive -# - Configure options for this port for this port and all dependencies. -# showconfig - Display options config for this port. -# rmconfig - Remove the options config for this port. -# rmconfig-recursive -# - Remove the options config for this port and all dependencies. -# -# Default sequence for "all" is: -# -# check-sanity fetch checksum extract patch configure build -# -# Please read the comments in the targets section below; you -# should be able to use the pre-* or post-* targets/scripts -# (which are available for every stage except checksum) or -# override the do-* targets to do pretty much anything you want. -# -# NEVER override the "regular" targets unless you want to open -# a major can of worms. -# -# Set these variables if your port doesn't need some of the steps. -# Note that there are no NO_PATCH or NO_CONFIGURE variables because -# those steps are empty by default. NO_EXTRACT is not allowed anymore -# since we need to at least create ${WRKDIR}. Also, NO_CHECKSUM is a user -# variable and is not to be set in a port's Makefile. See above for NO_PACKAGE. -# -# NO_BUILD - Use a dummy (do-nothing) build target. -# NO_INSTALL - Use a dummy (do-nothing) install target. -# -# Here are some variables used in various stages. -# -# For options: -# OPTIONS - List of what WITH_<option> options this port accept. The -# format is <option> "<description>" [on|off] -# Example: -# FLEXRESP "Flexible response to events" off -# which tell that an option WITH_FLEXRESP exists for this port, -# that by default it is not defined, and that the description to -# show to a user in the config dialog is "Flexible response to -# events". If you have more than one option, just chain them -# into a single variable. NOTE: To make options work, you need -# to include bsd.port.pre.mk before you start testing the -# WITH_xyz variables. -# -# For fetch: -# -# FETCH_BINARY - Path to ftp/http fetch command if not in $PATH. -# Default: "/usr/bin/fetch" -# FETCH_ARGS - Arguments to ftp/http fetch command. -# Default: "-ARr" -# FETCH_CMD - ftp/http fetch command. -# Default: ${FETCH_BINARY} ${FETCH_ARGS} -# FETCH_BEFORE_ARGS -# - Arguments to ${FETCH_CMD} before filename. -# Default: none -# FETCH_AFTER_ARGS -# - Arguments to ${FETCH_CMD} following filename. -# Default: none -# FETCH_ENV - Environment to pass to ${FETCH_CMD}. -# Default: none -# FETCH_REGET - Times to retry fetching of files on checksum errors. -# Default: 1 -# -# For extract: -# -# EXTRACT_CMD - Command for extracting archive: "bzip2" if USE_BZIP2 -# is set, "unzip" if USE_ZIP is set, "unmakeself" if -# USE_MAKESELF if set, "gzip" otherwise. -# EXTRACT_BEFORE_ARGS -# - Arguments to ${EXTRACT_CMD} before filename. -# Default: "-dc" -# EXTRACT_AFTER_ARGS -# - Arguments to ${EXTRACT_CMD} following filename. -# default: "| tar -xf -" -# EXTRACT_PRESERVE_OWNERSHIP -# - Normally, when run as "root", the extract stage will -# change the owner and group of all files under ${WRKDIR} -# to 0:0. Set this variable if you want to turn off this -# feature. -# -# For makesum: -# -# NO_SIZE - Don't record size data in distinfo, needed -# when the master site does not report file -# sizes, or when multiple valid versions of -# a distfile, having different sizes, exist. -# -# For patch: -# -# EXTRA_PATCHES - Define this variable if you have patches not in -# ${PATCHDIR}. This usually happens when you need to -# do some pre-processing before some distribution -# patches can be applied. In that case, fetch them as -# extra distfiles, put the processed results in -# ${WRKDIR}, then point EXTRA_PATCHES to them. -# The patches specified by this variable will be -# applied after the normal distribution patches but -# before those in ${PATCHDIR}. -# PATCH_WRKSRC - Directory to apply patches in. -# Default: ${WRKSRC} -# -# For configure: -# -# HAS_CONFIGURE - If set, this port has its own configure script. The -# configure stage will not do anything if this is not set. -# GNU_CONFIGURE - If set, you are using GNU configure (optional). Implies -# HAS_CONFIGURE. -# PERL_CONFIGURE -# - Configure using Perl's MakeMaker. Implies USE_PERL5. -# CONFIGURE_WRKSRC -# - Directory to run configure in. -# Default: ${WRKSRC} -# CONFIGURE_SCRIPT -# - Name of configure script, relative to ${CONFIGURE_WRKSRC}. -# Default: "Makefile.PL" if PERL_CONFIGURE is set, -# "configure" otherwise. -# CONFIGURE_TARGET -# - The name of target to call when GNU_CONFIGURE is -# defined. -# Default: ${ARCH}-portbld-freebsd${OSREL} -# CONFIGURE_ARGS -# - Pass these args to configure if ${HAS_CONFIGURE} is set. -# Default: "--prefix=${PREFIX} --infodir=${PREFIX}/${INFO_PATH} -# --mandir=${MANPREFIX}/man ${CONFIGURE_TARGET}" if -# GNU_CONFIGURE is set, "CC=${CC} CCFLAGS=${CFLAGS} -# PREFIX=${PREFIX} INSTALLPRIVLIB=${PREFIX}/lib -# INSTALLARCHLIB=${PREFIX}/lib" if PERL_CONFIGURE is set, -# empty otherwise. -# CONFIGURE_ENV - Pass these env (shell-like) to configure if -# ${HAS_CONFIGURE} is set. -# CONFIGURE_LOG - The name of configure log file. It will be printed to -# the screen if configure fails. -# Default: config.log -# CONFIGURE_FAIL_MESSAGE -# - A message displayed to users when configure -# fails (note: this assumes the do-configure -# target has not been overwritten). This message -# will be passed through /usr/bin/fmt before -# being shown to the user. -# -# For build and install: -# -# MAKEFILE - Name of the makefile. -# Default: Makefile -# ALL_TARGET - Default target for sub-make in build stage. -# Default: all -# BUILD_WRKSRC - Directory to do build in (default: ${WRKSRC}). -# MAKE_ENV - Additional environment vars passed to sub-make in build -# and install stages. -# Default: see below -# MAKE_ARGS - Any extra arguments to sub-make in build and install stages. -# Default: none -# -# For install: -# -# INSTALL_TARGET -# - Default target for sub-make in install stage. -# Default: install -# INSTALL_WRKSRC -# - Directory to install from -# Default: ${WRKSRC} -# NO_MTREE - If set, will not invoke mtree from bsd.port.mk from -# the "install" target. -# MTREE_FILE - The name of the mtree file. -# Default: ${PORTSDIR}/Templates/BSD.local.dist or -# /etc/mtree/BSD.usr.dist if ${PREFIX} == "/usr". -# PLIST_DIRS - Directories to be added to packing list -# PLIST_FILES - Files and symbolic links to be added to packing list -# -# PLIST - Name of the `packing list' file. -# Change this to ${WRKDIR}/PLIST or something if you -# need to write to it. (It is not a good idea for a port -# to write to any file outside ${WRKDIR} during a normal -# build.) -# Default: ${PKGDIR}/pkg-plist -# TMPPLIST - Name of the `packing list' file after processing -# Default: ${WRKDIR}/.PLIST.mktmp -# PLIST_SUB - List of "variable=value" pair for substitution in ${PLIST} -# Default: see below -# -# SUB_FILES - Files that should be passed through sed and redirected to -# ${WRKDIR}. -# - For each file specified in SUB_FILES, there must be a -# corresponding file in ${FILESDIR} whose suffix is ".in". For -# instance, if the Makefile specifies "SUB_FILES= pkg-message" -# then there must be a file called pkg-message.in in -# ${FILESDIR}. -# - The substitution process is the same as PLIST_FILES, as -# described below except that any line beginning with @comment -# is deleted. -# SUB_LIST - List of "variable=value" pair for substitution in ${SUB_FILES} -# Some pairs are added by default: eg. PREFIX=${PREFIX} -# -# INSTALLS_SHLIB -# - If set, bsd.port.mk will automatically run ldconfig commands -# from post-install and also add appropriate @exec/@unexec -# directives to directories listed in LDCONFIG_DIRS. (deprecated) -# If USE_LINUX_PREFIX is defined, the Linux version of -# ldconfig will be used instead of the native FreeBSD -# version, and LDCONFIG_DIRS will be ignored. -# LDCONFIG_DIRS - List of directories to run ldconfig if INSTALLS_SHLIB is set. -# Note that this is passed through sed just like the -# rest of PLIST, so ${PLIST_SUB} substitutions also -# apply here. It is recommended that you use -# %%PREFIX%% for ${PREFIX}, %%LOCALBASE%% for -# ${LOCALBASE} and %%X11BASE%% for ${X11BASE}. -# Default: %%PREFIX%%/lib -# USE_LDCONFIG - If set to "yes", this subsumes the function of the -# deprecated variable INSTALLS_SHLIB and adds ${PREFIX}/lib -# to the list of directories to be searched for shared -# libraries. Otherwise, this is a list of directories to -# be added to that list. The directory names are written to -# ${PREFIX}/libdata/ldconfig/${UNIQUENAME} which is then -# used by the ldconfig startup script. -# This mechanism replaces ldconfig scripts installed by some -# ports, often under such names as 000.${UNQUENAME}.sh. -# USE_LDCONFIG32 -# - Same as USE_LDCONFIG but the target file is -# ${PREFIX}/libdata/ldconfig32/${UNIQUENAME} instead. -# Note: that should only be used on 64-bit architectures. -# NO_LDCONFIG_MTREE -# - Denotes whether the libdata/ldconfig directory is part of -# the mtree on a given OSVERSION system. If it is not, we -# create the directory, pull in the ldconfig_compat port, -# and clean up on de-installation. NOTE: this variable is -# internal to bsd.port.mk and must not be set in your Makefile. -# -# DOCSDIR - Name of the directory to install the packages docs in. -# Default: ${PREFIX}/share/doc/${PORTNAME} -# DOCSDIR_REL - The DOCSDIR relative to ${PREFIX} -# EXAMPLESDIR - Name of the directory to install the packages examples in. -# Default: ${PREFIX}/share/examples/${PORTNAME} -# EXAMPLESDIR_REL -# - The EXAMPLESDIR relative to ${PREFIX} -# DATADIR - Name of the directory to install the packages shared data in. -# Default: ${PREFIX}/share/${PORTNAME} -# DATADIR_REL - The DATADIR relative to ${PREFIX} -# -# WWWDIR - Name of the directory to install the packages www data in. -# Default: ${PREFIX}/www/${PORTNAME} -# WWWDIR_REL - The WWWDIR relative to ${PREFIX} -# -# DESKTOPDIR - Name of the directory to install ${DESKTOP_ENTRIES} in. -# Default: ${PREFIX}/share/applications -# DESKTOP_ENTRIES -# - List of desktop entry files to generate and install in -# ${DESKTOPDIR}. The format is -# "Name" "Comment" "Icon" "Exec" "Categories" StartupNotify -# Rules: -# * Only add desktop entries for applications which do not -# require a terminal (ie. X applications). -# * If the upstream distribution already installs .desktop -# files, you do not need to use this. -# * If you require a more elaborate .desktop file than this -# variable permits, write it yourself and install it -# in ${DESKTOPDIR}. -# Notes: -# * Comment and Icon may be empty strings (""). Categories -# may be an empty string in some cases (see below). The -# other fields are mandatory. -# * If Categories is an empty string, bsd.port.mk will try -# to deduce a default value using the CATEGORIES variable. -# If the deduction fails, you will have to set Categories -# manually. You should check the generated value using -# "make desktop-categories", and override it if necessary. -# * Exec will also be used to name the .desktop file. -# * The files will be automatically added to ${PLIST}. -# Example: -# "X Window Information" \ -# "Get information about X windows" \ -# "wininfo.png" \ -# "wininfo" \ -# "Application;System;" \ -# true -# See http://standards.freedesktop.org/desktop-entry-spec/desktop-entry-spec-latest.html -# for an explanation of the fields. If you need to create more -# than one file, just chain them into a single variable. -# -# Note that the install target will automatically add manpages (see -# above) and also substitute special sequences of characters (delimited -# by "%%") as defined in PLIST_SUB to generate ${TMPPLIST}. For -# instance, "OSREL=${OSREL}" in PLIST_SUB causes all occurrences of -# "%%OSREL%%" in ${PLIST} to be substituted by the value of OSREL. -# ${TMPPLIST} is generated before the do-install stage. If you are -# generating the packing list on-the-fly, make sure it's generated before -# do-install is called! -# -# For package: -# -# NO_LATEST_LINK -# - Do not install the "Latest" link for package. Define this -# if this port is a beta version of another stable port -# which is also in the tree. -# LATEST_LINK - Install the "Latest" link for the package as ___. Define -# this if the "Latest" link name will be incorrectly determined. -# -# This is used in all stages: -# -# SCRIPTS_ENV - Additional environment vars passed to scripts in -# ${SCRIPTDIR} executed by bsd.port.mk. -# Default: see below -# -# Finally, variables to change if you want a special behavior. These -# are for debugging purposes. Don't set them in your Makefile. -# -# ECHO_MSG - Used to print all the '===>' style prompts - override this -# to turn them off. -# Default: ${ECHO_CMD} -# PATCH_DEBUG - If set, print out more information about the patches as -# it attempts to apply them. -# PKG_DBDIR - Where package installation is recorded; this directory -# must not contain anything else. -# Default: /var/db/pkg -# PORT_DBDIR - Where port configuration options are recorded. -# Default: /var/db/ports -# NO_PKG_REGISTER -# - Don't register a port installation as a package. -# FORCE_PKG_REGISTER -# - If set, it will overwrite any existing package -# registration information in ${PKG_DBDIR}/${PKGNAME}. -# NO_DEPENDS - Don't verify build of dependencies. -# CHECKSUM_ALGORITHMS -# - Different checksum algorithms to check for verifying the -# integrity of the distfiles. The absence of the algorithm -# in distinfo doesn't make it fail. -# Default: md5 sha256 -# NO_CHECKSUM - Don't verify the checksum. Typically used when -# when you noticed the distfile you just fetched has -# a different checksum and you intend to verify if -# the port still works with it. -# USE_PACKAGE_DEPENDS -# - Install dependencies from existing packages instead -# of building the port from scratch. -# INSTALL_AS_USER -# - Define this to install as the current user, intended -# for systems where you have no root access. -# DISABLE_SIZE - Do not check the size of a distfile even if the SIZE field -# has been specified in distinfo. This is useful -# when using an alternate FETCH_CMD. -# -# End of the list of all variables that need to be defined in a port. -# Most port authors should not need to understand anything after this point. -# - -# These need to be absolute since we don't know how deep in the ports -# tree we are and thus can't go relative. They can, of course, be overridden -# by individual Makefiles or local system make configuration. -PORTSDIR?= /usr/ports -LOCALBASE?= /usr/local -X11BASE?= ${LOCALBASE} -LINUXBASE?= /compat/linux -DISTDIR?= ${PORTSDIR}/distfiles -_DISTDIR?= ${DISTDIR}/${DIST_SUBDIR} -INDEXDIR?= ${PORTSDIR} - -.include "${PORTSDIR}/Mk/bsd.commands.mk" - -# -# DESTDIR section to start a chrooted process if invoked with DESTDIR set -# - -.if defined(DESTDIR) && !empty(DESTDIR) && !defined(CHROOTED) && \ - !defined(BEFOREPORTMK) && !defined(INOPTIONSMK) - -.include "${PORTSDIR}/Mk/bsd.destdir.mk" - -.else - -# Look for ${WRKSRC}/.../*.orig files, and (re-)create -# ${FILEDIR}/patch-* files from them. - -.if !target(makepatch) -makepatch: - @cd ${.CURDIR} && ${MKDIR} ${FILESDIR} - @(cd ${WRKSRC}; \ - for i in `find . -type f -name '*.orig'`; do \ - ORG=$$i; \ - NEW=$${i%.orig}; \ - OUT=${FILESDIR}`${ECHO} $${NEW} | \ - ${SED} -e 's|/|__|g' \ - -e 's|^\.__|/patch-|'`; \ - ${ECHO} ${DIFF} -ud $${ORG} $${NEW} '>' $${OUT}; \ - ${DIFF} -ud $${ORG} $${NEW} > $${OUT} || ${TRUE}; \ - done \ - ) -.endif - - -# Start of options section -.if defined(INOPTIONSMK) || ( !defined(USEOPTIONSMK) && !defined(AFTERPORTMK) ) - -.if defined(MAKE_VERSION) -.if ${MAKE_VERSION} >= 5200408030 || ${MAKE_VERSION} >= 4200408030 && ${MAKE_VERSION} < 5000000000 -NOPRECIOUSSOFTMAKEVARS= yes -.endif -.endif - -# Get the default maintainer -MAINTAINER?= ports@FreeBSD.org - -# Get the architecture -.if !defined(ARCH) -ARCH!= ${UNAME} -p -.endif - -# Kludge for pre-3.0 systems -MACHINE_ARCH?= i386 - -# Get the operating system type -.if !defined(OPSYS) -OPSYS!= ${UNAME} -s -.endif - -# Get the operating system revision -.if !defined(OSREL) -OSREL!= ${UNAME} -r | ${SED} -e 's/[-(].*//' -.endif - -# Get __FreeBSD_version -.if !defined(OSVERSION) -.if exists(/usr/include/sys/param.h) -OSVERSION!= ${AWK} '/^\#define __FreeBSD_version/ {print $$3}' < /usr/include/sys/param.h -.elif exists(/usr/src/sys/sys/param.h) -OSVERSION!= ${AWK} '/^\#define __FreeBSD_version/ {print $$3}' < /usr/src/sys/sys/param.h -.else -OSVERSION!= ${SYSCTL} -n kern.osreldate -.endif -.endif - -MASTERDIR?= ${.CURDIR} - -.if ${MASTERDIR} != ${.CURDIR} -SLAVE_PORT?= yes -MASTER_PORT?=${MASTERDIR:C/[^\/]+\/\.\.\///:C/[^\/]+\/\.\.\///:C/^.*\/([^\/]+\/[^\/]+)$/\\1/} -.else -SLAVE_PORT?= no -MASTER_PORT?= -.endif - -# If they exist, include Makefile.inc, then architecture/operating -# system specific Makefiles, then local Makefile.local. - -.if ${MASTERDIR} != ${.CURDIR} && exists(${.CURDIR}/../Makefile.inc) -.include "${.CURDIR}/../Makefile.inc" -USE_SUBMAKE= yes -.endif - -.if exists(${MASTERDIR}/../Makefile.inc) -.include "${MASTERDIR}/../Makefile.inc" -USE_SUBMAKE= yes -.endif - -.if exists(${MASTERDIR}/Makefile.${ARCH}-${OPSYS}) -.include "${MASTERDIR}/Makefile.${ARCH}-${OPSYS}" -USE_SUBMAKE= yes -.elif exists(${MASTERDIR}/Makefile.${OPSYS}) -.include "${MASTERDIR}/Makefile.${OPSYS}" -USE_SUBMAKE= yes -.elif exists(${MASTERDIR}/Makefile.${ARCH}) -.include "${MASTERDIR}/Makefile.${ARCH}" -USE_SUBMAKE= yes -.endif - -.if exists(${MASTERDIR}/Makefile.local) -.include "${MASTERDIR}/Makefile.local" -USE_SUBMAKE= yes -.endif - -# where 'make config' records user configuration options -PORT_DBDIR?= /var/db/ports - -LDCONFIG_DIR= libdata/ldconfig -LDCONFIG32_DIR= libdata/ldconfig32 - -.if defined(LATEST_LINK) -UNIQUENAME?= ${LATEST_LINK} -.else -UNIQUENAME?= ${PKGNAMEPREFIX}${PORTNAME} -.endif -OPTIONSFILE?= ${PORT_DBDIR}/${UNIQUENAME}/options -_OPTIONSFILE!= ${ECHO_CMD} "${OPTIONSFILE}" -.if defined(OPTIONS) -# include OPTIONSFILE first if exists -. if exists(${_OPTIONSFILE}) && !make(rmconfig) -. include "${_OPTIONSFILE}" -. endif -. if exists(${_OPTIONSFILE}.local) -. include "${_OPTIONSFILE}.local" -. endif -WITHOUT:= -WITH:= -. if defined(OPTIONS) -REALOPTIONS=${OPTIONS:C/".*"//g} -. for O in ${REALOPTIONS} -RO:=${O} -. if ${RO:L} == off -WITHOUT:= ${WITHOUT} ${OPT} -. endif -. if ${RO:L} == on -WITH:= ${WITH} ${OPT} -. endif -OPT:=${RO} -. endfor -. endif -# define only if NO WITH/WITHOUT_${W} is defined -. for W in ${WITH} -. if !defined(WITH_${W}) && !defined(WITHOUT_${W}) -WITH_${W}:= true -. endif -. endfor -. for W in ${WITHOUT} -. if !defined(WITH_${W}) && !defined(WITHOUT_${W}) -WITHOUT_${W}:= true -. endif -. endfor -. undef WITH -. undef WITHOUT -. undef RO -. undef REALOPTIONS -.endif - -.endif - -DOS2UNIX_REGEX?= .* - - -# Start of pre-makefile section. -.if !defined(AFTERPORTMK) && !defined(INOPTIONSMK) - -.if defined(_PREMKINCLUDED) -check-makefile:: - @${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.pre].mk twice" - @${FALSE} -.endif - -_PREMKINCLUDED= yes - -.if defined(PORTVERSION) -.if ${PORTVERSION:M*[-_,]*}x != x -IGNORE= PORTVERSION ${PORTVERSION} may not contain '-' '_' or ',' -.endif -DISTVERSION?= ${PORTVERSION:S/:/::/g} -.elif defined(DISTVERSION) -PORTVERSION= ${DISTVERSION:L:C/([a-z])[a-z]+/\1/g:C/([0-9])([a-z])/\1.\2/g:C/:(.)/\1/g:C/[^a-z0-9+]+/./g} -.endif - -PORTREVISION?= 0 -.if ${PORTREVISION} != 0 -_SUF1= _${PORTREVISION} -.endif - -PORTEPOCH?= 0 -.if ${PORTEPOCH} != 0 -_SUF2= ,${PORTEPOCH} -.endif - -PKGVERSION= ${PORTVERSION:C/[-_,]/./g}${_SUF1}${_SUF2} -PKGNAME= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX}-${PKGVERSION} -DISTNAME?= ${PORTNAME}-${DISTVERSIONPREFIX}${DISTVERSION:C/:(.)/\1/g}${DISTVERSIONSUFFIX} - -INDEXFILE?= INDEX-${OSVERSION:C/([0-9]).*/\1/} - -DOCSDIR?= ${PREFIX}/share/doc/${PORTNAME} -EXAMPLESDIR?= ${PREFIX}/share/examples/${PORTNAME} -DATADIR?= ${PREFIX}/share/${PORTNAME} -WWWDIR?= ${PREFIX}/www/${PORTNAME} -ETCDIR?= ${PREFIX}/etc/${PORTNAME} - -.if defined(USE_LINUX_RPM) -.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk" -.endif - -.if ${OSVERSION} >= 502123 -X_WINDOW_SYSTEM ?= xorg -.else -X_WINDOW_SYSTEM ?= xfree86-4 -.endif - -.if ${OSVERSION} < 602000 -.if ${X11BASE} != ${LOCALBASE} && !defined(USE_NONDEFAULT_X11BASE) -.BEGIN: - @${ECHO_MSG} "On FreeBSD before 6.2 ports system unfortunately can not set default X11BASE by itself so please help it a bit by setting X11BASE=\$${LOCALBASE} in make.conf." - @${ECHO_MSG} "On the other hand, if you do wish to use non-default X11BASE, please set variable USE_NONDEFAULT_X11BASE." - @${FALSE} -.endif -.endif - -.if defined(USE_XORG) || defined(XORG_CAT) -. if ${X_WINDOW_SYSTEM} == "xorg" -.include "${PORTSDIR}/Mk/bsd.xorg.mk" -. endif -.endif - -.if defined(USE_BZIP2) -EXTRACT_SUFX?= .tar.bz2 -.elif defined(USE_ZIP) -EXTRACT_SUFX?= .zip -.elif defined(USE_MAKESELF) -EXTRACT_SUFX?= .run -.else -EXTRACT_SUFX?= .tar.gz -.endif -PACKAGES?= ${PORTSDIR}/packages -TEMPLATES?= ${PORTSDIR}/Templates - -PATCHDIR?= ${MASTERDIR}/files -FILESDIR?= ${MASTERDIR}/files -SCRIPTDIR?= ${MASTERDIR}/scripts -PKGDIR?= ${MASTERDIR} - -.if defined(USE_IMAKE) && !defined(USE_X_PREFIX) -USE_X_PREFIX= yes -.endif -.if defined(USE_X_PREFIX) && ${USE_X_PREFIX} == "no" -.undef USE_X_PREFIX -.endif -.if defined(USE_X_PREFIX) -USE_XLIB= yes -.endif -.if defined(USE_X_PREFIX) -PREFIX?= ${X11BASE} -.elif defined(USE_LINUX_PREFIX) -PREFIX?= ${LINUXBASE} -NO_MTREE= yes -.else -PREFIX?= ${LOCALBASE} -.endif - -.if defined(USE_LINUX_PREFIX) -LDCONFIG_CMD?= ${LINUXBASE}/sbin/ldconfig -r ${LINUXBASE} -LDCONFIG_PLIST_EXEC_CMD?= ${LDCONFIG_CMD} -LDCONFIG_PLIST_UNEXEC_CMD?= ${LDCONFIG_CMD} -.else -LDCONFIG_CMD?= ${LDCONFIG} -m ${LDCONFIG_RUNLIST} -LDCONFIG_PLIST_EXEC_CMD?= ${LDCONFIG} -m ${LDCONFIG_PLIST} -LDCONFIG_PLIST_UNEXEC_CMD?= ${LDCONFIG} -R -.endif - -PKGCOMPATDIR?= ${LOCALBASE}/lib/compat/pkg - -# XXX to remain undefined until all ports that require Perl are fixed -# to set one of the conditionals that force the inclusion of bsd.perl.mk -.if !defined(_PERL_REFACTORING_COMPLETE) - -PERL_VERSION?= 5.8.8 -PERL_VER?= 5.8.8 - -.if !defined(PERL_LEVEL) && defined(PERL_VERSION) -perl_major= ${PERL_VERSION:C|^([1-9]+).*|\1|} -_perl_minor= 00${PERL_VERSION:C|^([1-9]+)\.([0-9]+).*|\2|} -perl_minor= ${_perl_minor:C|^.*(...)|\1|} -.if ${perl_minor} >= 100 -perl_minor= ${PERL_VERSION:C|^([1-9]+)\.([0-9][0-9][0-9]).*|\2|} -perl_patch= ${PERL_VERSION:C|^.*(..)|\1|} -.else # ${perl_minor} < 100 -_perl_patch= 0${PERL_VERSION:C|^([1-9]+)\.([0-9]+)\.*|0|} -perl_patch= ${_perl_patch:C|^.*(..)|\1|} -.endif # ${perl_minor} < 100 -PERL_LEVEL= ${perl_major}${perl_minor}${perl_patch} -.else -PERL_LEVEL=0 -.endif # !defined(PERL_LEVEL) && defined(PERL_VERSION) - -PERL_ARCH?= mach - -.if ${PERL_LEVEL} >= 500800 -PERL_PORT?= perl5.8 -.else -PERL_PORT?= perl5 -.endif - -SITE_PERL_REL?= lib/perl5/site_perl/${PERL_VER} -SITE_PERL?= ${LOCALBASE}/${SITE_PERL_REL} - -PERL5= ${LOCALBASE}/bin/perl${PERL_VERSION} -PERL= ${LOCALBASE}/bin/perl - -PLIST_SUB+= PERL_VERSION=${PERL_VERSION} \ - PERL_VER=${PERL_VER} \ - PERL_ARCH=${PERL_ARCH} \ - SITE_PERL=${SITE_PERL_REL} - -.endif # !defined(_PERL_REFACTORING_COMPLETE) - -.if defined(USE_LOCAL_MK) -.include "${PORTSDIR}/Mk/bsd.local.mk" -.endif - -.if defined(USE_OPENSSL) -.include "${PORTSDIR}/Mk/bsd.openssl.mk" -.endif - -.if defined(USE_EMACS) -.include "${PORTSDIR}/Mk/bsd.emacs.mk" -.endif - -.if defined(USE_GNUSTEP) -.include "${PORTSDIR}/Mk/bsd.gnustep.mk" -.endif - -#.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) || defined(USE_PERL5_RUN) || defined(PERL_CONFIGURE) || defined(PERL_MODBUILD) -.include "${PORTSDIR}/Mk/bsd.perl.mk" -#.endif - -.if defined(USE_PHP) -.include "${PORTSDIR}/Mk/bsd.php.mk" -.endif - -.if defined(USE_PYTHON) || defined(USE_PYTHON_BUILD) || defined(USE_PYTHON_RUN) -.include "${PORTSDIR}/Mk/bsd.python.mk" -.endif - -.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART) -.include "${PORTSDIR}/Mk/bsd.efl.mk" -.endif - -.if defined(USE_JAVA) -.include "${PORTSDIR}/Mk/bsd.java.mk" -.endif - -.if defined(USE_RUBY) || defined(USE_LIBRUBY) -.include "${PORTSDIR}/Mk/bsd.ruby.mk" -.endif - -.if defined(USE_OCAML) -.include "${PORTSDIR}/Mk/bsd.ocaml.mk" -.endif - -.if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TCL_RUN) || defined(USE_TCL_WRAPPER) || defined(USE_TK) || defined(USE_TK_BUILD) || defined(USE_TK_RUN) || defined(USE_TK_WRAPPER) -.include "${PORTSDIR}/Mk/bsd.tcl.mk" -.endif - -.if defined(USE_APACHE) || defined(APACHE_COMPAT) -.include "${PORTSDIR}/Mk/bsd.apache.mk" -.endif - -.if (defined(USE_QT_VER) && ${USE_QT_VER:L} == 3) || defined(USE_KDELIBS_VER) || defined(USE_KDEBASE_VER) -.include "${PORTSDIR}/Mk/bsd.kde.mk" -.endif - -.if defined (USE_QT_VER) && ${USE_QT_VER:L} == 4 -.include "${PORTSDIR}/Mk/bsd.qt.mk" -.endif - -.if defined(WANT_GNOME) || defined(USE_GNOME) || defined(USE_GTK) -.include "${PORTSDIR}/Mk/bsd.gnome.mk" -.endif - -.if defined(WANT_LUA) || defined(USE_LUA) || defined(USE_LUA_NOT) -.include "${PORTSDIR}/Mk/bsd.lua.mk" -.endif - -.if defined(WANT_WX) || defined(USE_WX) || defined(USE_WX_NOT) -.include "${PORTSDIR}/Mk/bsd.wx.mk" -.endif - -.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER80) -.include "${PORTSDIR}/Mk/bsd.gstreamer.mk" -.endif - -.if defined(USE_QMAIL) || defined(USE_QMAIL_RUN) || defined(USE_QMAIL_BUILD) || defined(WANT_QMAIL) -.include "${PORTSDIR}/Mk/bsd.mail.mk" -.endif - -.if defined(USE_SDL) || defined(WANT_SDL) -.include "${PORTSDIR}/Mk/bsd.sdl.mk" -.endif - -.if defined(USE_XFCE) -.include "${PORTSDIR}/Mk/bsd.xfce.mk" -.endif - -# You can force skipping these test by defining IGNORE_PATH_CHECKS -.if !defined(IGNORE_PATH_CHECKS) -.if (${PREFIX:C,(^.).*,\1,} != "/") -.BEGIN: - @${ECHO_MSG} "PREFIX must be defined as an absolute path so that when 'make'" - @${ECHO_MSG} "is invoked in the work area PREFIX points to the right place." - @${FALSE} -.endif -.endif - -X_WINDOW_SYSTEM ?= xorg - -# Location of mounted CDROM(s) to search for files -CD_MOUNTPTS?= /cdrom ${CD_MOUNTPT} - -WANT_OPENLDAP_VER?= 23 - -# Owner and group of the WWW user -WWWOWN?= www -WWWGRP?= www - -.endif -# End of pre-makefile section. - -# Start of post-makefile section. -.if !defined(BEFOREPORTMK) && !defined(INOPTIONSMK) - -.if defined(_POSTMKINCLUDED) -check-makefile:: - @${ECHO_MSG} "${PKGNAME}: Makefile error: you cannot include bsd.port[.post].mk twice" - @${FALSE} -.endif - -_POSTMKINCLUDED= yes - -WRKDIR?= ${WRKDIRPREFIX}${.CURDIR}/work -.if defined(NO_WRKSUBDIR) -WRKSRC?= ${WRKDIR} -.else -WRKSRC?= ${WRKDIR}/${DISTNAME} -.endif - -PATCH_WRKSRC?= ${WRKSRC} -CONFIGURE_WRKSRC?= ${WRKSRC} -BUILD_WRKSRC?= ${WRKSRC} -INSTALL_WRKSRC?=${WRKSRC} - -PLIST_SUB+= OSREL=${OSREL} PREFIX=%D LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} -SUB_LIST+= PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} \ - DATADIR=${DATADIR} DOCSDIR=${DOCSDIR} EXAMPLESDIR=${EXAMPLESDIR} \ - WWWDIR=${WWWDIR} ETCDIR=${ETCDIR} - -PLIST_REINPLACE+= dirrmtry stopdaemon -PLIST_REINPLACE_DIRRMTRY=s!^@dirrmtry \(.*\)!@unexec rmdir %D/\1 2>/dev/null || true! -PLIST_REINPLACE_STOPDAEMON=s!^@stopdaemon \(.*\)!@unexec %D/etc/rc.d/\1${RC_SUBR_SUFFIX} forcestop 2>/dev/null || true! - -.if defined(WITHOUT_CPU_CFLAGS) -.if defined(_CPUCFLAGS) -.if !empty(_CPUCFLAGS) -CFLAGS:= ${CFLAGS:C/${_CPUCFLAGS}//} -.endif -.endif -.endif - -.if defined(WITH_DEBUG) && !defined(WITHOUT_DEBUG) -STRIP= #none -STRIP_CMD= ${TRUE} -DEBUG_FLAGS?= -g -CFLAGS:= ${CFLAGS:N-O*:N-fno-strict*} ${DEBUG_FLAGS} -.endif - -.if defined(NOPORTDOCS) -PLIST_SUB+= PORTDOCS="@comment " -.else -PLIST_SUB+= PORTDOCS="" -.endif - -.if defined(NOPORTEXAMPLES) -PLIST_SUB+= PORTEXAMPLES="@comment " -.else -PLIST_SUB+= PORTEXAMPLES="" -.endif - -.if defined(NOPORTDATA) -PLIST_SUB+= PORTDATA="@comment " -.else -PLIST_SUB+= PORTDATA="" -.endif - -CONFIGURE_SHELL?= ${SH} -MAKE_SHELL?= ${SH} - -CONFIGURE_ENV+= SHELL=${SH} CONFIG_SHELL=${SH} -MAKE_ENV+= SHELL=${SH} NO_LINT=YES - -.if defined(MANCOMPRESSED) -.if ${MANCOMPRESSED} != yes && ${MANCOMPRESSED} != no && \ - ${MANCOMPRESSED} != maybe -check-makevars:: - @${ECHO_MSG} "${PKGNAME}: Makefile error: value of MANCOMPRESSED (is \"${MANCOMPRESSED}\") can only be \"yes\", \"no\" or \"maybe\"". - @${FALSE} -.endif -.endif - -.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) -MANCOMPRESSED?= yes -.else -MANCOMPRESSED?= no -.endif - -.if defined(PATCHFILES) -.if ${PATCHFILES:M*.zip}x != x -PATCH_DEPENDS+= unzip:${PORTSDIR}/archivers/unzip -.endif -.endif - -# Check the compatibility layer for amd64/ia64 - -.if ${ARCH} == "amd64" || ${ARCH} =="ia64" -.if exists(/usr/lib32) -HAVE_COMPAT_IA32_LIBS?= YES -.endif -.if !defined(HAVE_COMPAT_IA32_KERN) -HAVE_COMPAT_IA32_KERN!= if ${SYSCTL} -a compat.ia32.maxvmem >/dev/null 2>&1; then echo YES; fi -.endif -.endif - -.if defined(IA32_BINARY_PORT) && ${ARCH} != "i386" -.if ${ARCH} == "amd64" || ${ARCH} == "ia64" -.if !defined(HAVE_COMPAT_IA32_KERN) -IGNORE= requires a kernel with compiled-in IA32 compatibility -.elif !defined(HAVE_COMPAT_IA32_LIBS) -IGNORE= requires 32-bit libraries installed under /usr/lib32 -.endif -_LDCONFIG_FLAGS=-32 -LIB32DIR= lib32 -.else -IGNORE= requires i386 (or compatible) platform to run -.endif -.else -LIB32DIR= lib -.endif -PLIST_SUB+= LIB32DIR=${LIB32DIR} - -.if defined(USE_ZIP) -EXTRACT_DEPENDS+= unzip:${PORTSDIR}/archivers/unzip -.endif -.if defined(USE_MAKESELF) -EXTRACT_DEPENDS+= unmakeself:${PORTSDIR}/archivers/unmakeself -.endif -.if defined(USE_GMAKE) -BUILD_DEPENDS+= gmake:${PORTSDIR}/devel/gmake -CONFIGURE_ENV+= MAKE=${GMAKE} -.endif - -.if defined(USE_GCC) || defined(USE_FORTRAN) -.include "${PORTSDIR}/Mk/bsd.gcc.mk" -.endif - -.if defined(USE_OPENLDAP_VER) -USE_OPENLDAP?= yes -WANT_OPENLDAP_VER= ${USE_OPENLDAP_VER} -.endif - -.if defined(USE_OPENLDAP) -.if defined(WANT_OPENLDAP_SASL) -_OPENLDAP_FLAVOUR= -sasl -.else -_OPENLDAP_FLAVOUR= -.endif -.if ${WANT_OPENLDAP_VER} == 22 -LIB_DEPENDS+= ldap-2.2.7:${PORTSDIR}/net/openldap22${_OPENLDAP_FLAVOUR}-client -.elif ${WANT_OPENLDAP_VER} == 23 -LIB_DEPENDS+= ldap-2.3.2:${PORTSDIR}/net/openldap23${_OPENLDAP_FLAVOUR}-client -.elif ${WANT_OPENLDAP_VER} == 24 -LIB_DEPENDS+= ldap-2.4.2:${PORTSDIR}/net/openldap24${_OPENLDAP_FLAVOUR}-client -.else -IGNORE= cannot be built with unknown OpenLDAP version: ${WANT_OPENLDAP_VER} -.endif -.endif - -.if defined(USE_FAM) -DEFAULT_FAM_SYSTEM= gamin -# Currently supported FAM systems -FAM_SYSTEM_FAM= fam.0:${PORTSDIR}/devel/fam -FAM_SYSTEM_GAMIN= fam.0:${PORTSDIR}/devel/gamin - -.if exists(${LOCALBASE}/libexec/gam_server) -_HAVE_FAM_SYSTEM= gamin -.elif exists(${LOCALBASE}/bin/fam) -_HAVE_FAM_SYSTEM= fam -.endif - -.if defined(WANT_FAM_SYSTEM) -.if defined(WITH_FAM_SYSTEM) && ${WITH_FAM_SYSTEM}!=${WANT_FAM_SYSTEM} -IGNORE= wants to use ${WANT_FAM_SYSTEM} as its FAM system, while you wish to use ${WITH_FAM_SYSTEM} -.endif -FAM_SYSTEM= ${WANT_FAM_SYSTEM} -.elif defined(WITH_FAM_SYSTEM) -FAM_SYSTEM= ${WITH_FAM_SYSTEM} -.else -.if defined(_HAVE_FAM_SYSTEM) -FAM_SYSTEM= ${_HAVE_FAM_SYSTEM} -.else -FAM_SYSTEM= ${DEFAULT_FAM_SYSTEM} -.endif -.endif # WANT_FAM_SYSTEM - -.if defined(_HAVE_FAM_SYSTEM) -.if ${_HAVE_FAM_SYSTEM}!= ${FAM_SYSTEM} -BROKEN= FAM system mismatch: ${_HAVE_FAM_SYSTEM} is installed, while desired FAM system is ${FAM_SYSTEM} -.endif -.endif - -.if defined(FAM_SYSTEM_${FAM_SYSTEM:U}) -LIB_DEPENDS+= ${FAM_SYSTEM_${FAM_SYSTEM:U}} -.else -IGNORE= cannot be built with unknown FAM system: ${FAM_SYSTEM} -.endif -.endif # USE_FAM - -.if defined(USE_RC_SUBR) || defined(USE_RCORDER) -RC_SUBR= /etc/rc.subr -SUB_LIST+= RC_SUBR=${RC_SUBR} -.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES" -SUB_FILES+= ${USE_RC_SUBR} -.endif -.if defined(USE_RCORDER) -SUB_FILES+= ${USE_RCORDER} -.endif -.if (${OSVERSION} >= 700007 || ( ${OSVERSION} < 700000 && ${OSVERSION} >= 600101 )) -RC_SUBR_SUFFIX?= -.else -RC_SUBR_SUFFIX?= .sh -.endif -.endif - -.if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) -.if ( ${OSVERSION} < 504105 ) || \ - ( ${OSVERSION} >= 700000 && ${OSVERSION} < 700012 ) || \ - ( ${OSVERSION} >= 600000 && ${OSVERSION} < 600104 ) -RUN_DEPENDS+= ${LOCALBASE}/${LDCONFIG_DIR}:${PORTSDIR}/misc/ldconfig_compat -NO_LDCONFIG_MTREE= yes -.endif -.if defined(USE_LDCONFIG) && ${USE_LDCONFIG:L} == "yes" -USE_LDCONFIG= ${PREFIX}/lib -.endif -.if defined(USE_LDCONFIG32) && ${USE_LDCONFIG32:L} == "yes" -IGNORE= has USE_LDCONFIG32 set to yes, which is not correct -.endif -.endif - -.if defined(USE_ICONV) -LIB_DEPENDS+= iconv.3:${PORTSDIR}/converters/libiconv -.endif - -.if defined(USE_GETTEXT) -. if ${USE_GETTEXT:L} == "yes" -LIB_DEPENDS+= intl:${PORTSDIR}/devel/gettext -. else -LIB_DEPENDS+= intl.${USE_GETTEXT}:${PORTSDIR}/devel/gettext -. endif -.endif - -.if defined(USE_LINUX_PREFIX) && defined(INSTALLS_SHLIB) -# we need ${LINUXBASE}/sbin/ldconfig -USE_LINUX?= yes -.endif - -.if defined(USE_LINUX) - -# install(1) also does a brandelf on strip, so don't strip with FreeBSD tools. -STRIP= -. if exists(${LINUXBASE}/usr/bin/strip) -STRIP_CMD= ${LINUXBASE}/usr/bin/strip -. else -STRIP_CMD= ${TRUE} -. endif - -# Allow the user to specify another linux_base version. -. if defined(OVERRIDE_LINUX_BASE_PORT) -. if ${USE_LINUX:L} == yes -USE_LINUX= ${OVERRIDE_LINUX_BASE_PORT} -. endif -. endif - -# NOTE: when you update the default linux_base version (case "yes"), -# don't forget to update the Handbook! - -. if exists(${PORTSDIR}/emulators/linux_base-${USE_LINUX}) -LINUX_BASE_PORT= ${LINUXBASE}/bin/sh:${PORTSDIR}/emulators/linux_base-${USE_LINUX} -. else -. if ${USE_LINUX:L} == "yes" -LINUX_BASE_PORT= ${LINUXBASE}/etc/fedora-release:${PORTSDIR}/emulators/linux_base-fc4 -. else -IGNORE= cannot be built: there is no emulators/linux_base-${USE_LINUX}, perhaps wrong use of USE_LINUX or OVERRIDE_LINUX_BASE_PORT -. endif -. endif - -RUN_DEPENDS+= ${LINUX_BASE_PORT} -.endif - -.if defined(USE_MOTIF) -USE_XPM= yes -.if defined(WANT_LESSTIF) -LIB_DEPENDS+= Xm:${PORTSDIR}/x11-toolkits/lesstif -NO_OPENMOTIF= yes -.endif -.if !defined(NO_OPENMOTIF) -LIB_DEPENDS+= Xm.3:${PORTSDIR}/x11-toolkits/open-motif -.endif -.endif - -.if defined(USE_FREETYPE) -LIB_DEPENDS+= ttf.4:${PORTSDIR}/print/freetype -.endif - -.if defined(X_WINDOW_SYSTEM) && ${X_WINDOW_SYSTEM:L} == xorg -X_IMAKE_PORT= ${PORTSDIR}/devel/imake -X_LIBRARIES_PORT= ${PORTSDIR}/x11/xorg-libraries -X_CLIENTS_PORT= ${PORTSDIR}/x11/xorg-apps -X_SERVER_PORT= ${PORTSDIR}/x11-servers/xorg-server -X_FONTSERVER_PORT= ${PORTSDIR}/x11-fonts/xfs -X_PRINTSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-printserver -X_VFBSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-vfbserver -X_NESTSERVER_PORT= ${PORTSDIR}/x11-servers/xorg-nestserver -X_FONTS_ENCODINGS_PORT= ${PORTSDIR}/x11-fonts/encodings -X_FONTS_MISC_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-miscbitmaps -X_FONTS_100DPI_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-100dpi -X_FONTS_75DPI_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-75dpi -X_FONTS_CYRILLIC_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-cyrillic -X_FONTS_TTF_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-truetype -X_FONTS_TYPE1_PORT= ${PORTSDIR}/x11-fonts/xorg-fonts-type1 -X_FONTS_ALIAS_PORT= ${PORTSDIR}/x11-fonts/font-alias -.elif defined(X_WINDOW_SYSTEM) && ${X_WINDOW_SYSTEM:L} == xfree86-4 -X_IMAKE_PORT= ${PORTSDIR}/devel/imake-4 -X_LIBRARIES_PORT= ${PORTSDIR}/x11/XFree86-4-libraries -X_CLIENTS_PORT= ${PORTSDIR}/x11/XFree86-4-clients -X_SERVER_PORT= ${PORTSDIR}/x11-servers/XFree86-4-Server -X_FONTSERVER_PORT= ${PORTSDIR}/x11-servers/XFree86-4-FontServer -X_PRINTSERVER_PORT= ${PORTSDIR}/x11-servers/XFree86-4-PrintServer -X_VFBSERVER_PORT= ${PORTSDIR}/x11-servers/XFree86-4-VirtualFramebufferServer -X_NESTSERVER_PORT= ${PORTSDIR}/x11-servers/XFree86-4-NestServer -X_FONTS_ENCODINGS_PORT= ${PORTSDIR}/x11-fonts/XFree86-4-fontEncodings -X_FONTS_MISC_PORT= ${PORTSDIR}/x11-fonts/XFree86-4-fontDefaultBitmaps -X_FONTS_100DPI_PORT= ${PORTSDIR}/x11-fonts/XFree86-4-font100dpi -X_FONTS_75DPI_PORT= ${PORTSDIR}/x11-fonts/XFree86-4-font75dpi -X_FONTS_CYRILLIC_PORT= ${PORTSDIR}/x11-fonts/XFree86-4-fontCyrillic -X_FONTS_TTF_PORT= ${PORTSDIR}/x11-fonts/XFree86-4-fontScalable -X_FONTS_TYPE1_PORT= ${PORTSDIR}/x11-fonts/XFree86-4-fontScalable -.else -IGNORE= cannot be installed: bad X_WINDOW_SYSTEM setting; valid values are 'xfree86-4' and 'xorg' -.endif - -.if defined(USE_IMAKE) -BUILD_DEPENDS+= imake:${X_IMAKE_PORT} -.endif - -.if defined(PACKAGE_BUILDING) && defined(USE_DISPLAY) -BUILD_DEPENDS+= Xvfb:${X_VFBSERVER_PORT} \ - ${X11BASE}/lib/X11/fonts/misc/8x13O.pcf.gz:${X_FONTS_MISC_PORT} \ - ${X11BASE}/lib/X11/fonts/misc/fonts.alias:${X_FONTS_ALIAS_PORT} -.endif - -.if ${X_WINDOW_SYSTEM:L} == xfree86-4 - -.if defined(USE_XPM) -USE_XLIB= yes -.endif - -XAWVER= 7 -PKG_IGNORE_DEPENDS?= 'this_port_does_not_exist' - -.else - -.if defined(USE_XPM) -LIB_DEPENDS+= Xpm.4:${PORTSDIR}/x11/libXpm -# XXX - At some point we'll have to fix ports to use USE_XORG to -# the right value and remove both USE_XPM and USE_XLIB. Hopefully -# XFree86-4 will be gone in the meantime. -USE_XLIB= yes -.endif - -XAWVER= 8 -PKG_IGNORE_DEPENDS?= 'this_port_does_not_exist' - -.endif - -PLIST_SUB+= XAWVER=${XAWVER} - -_GL_gl_LIB_DEPENDS= GL.1:${PORTSDIR}/graphics/libGL -_GL_glu_LIB_DEPENDS= GLU.1:${PORTSDIR}/graphics/libGLU -_GL_glw_LIB_DEPENDS= GLw.1:${PORTSDIR}/graphics/libGLw -_GL_glut_LIB_DEPENDS= glut.4:${PORTSDIR}/graphics/libglut -_GL_linux_RUN_DEPENDS= ${LINUXBASE}/usr/X11R6/lib/libGL.so.1:${PORTSDIR}/graphics/linux_dri - -.if defined(USE_GL) -. if ${X_WINDOW_SYSTEM:L} == xfree86-4 -USE_XLIB= yes -. else -. if ${USE_GL:L} == "yes" -USE_GL= glu -. endif -. for _component in ${USE_GL} -. if !defined(_GL_${_component}_LIB_DEPENDS) && \ - !defined(_GL_${_component}_RUN_DEPENDS) -IGNORE= uses unknown GL component -. else -LIB_DEPENDS+= ${_GL_${_component}_LIB_DEPENDS} -RUN_DEPENDS+= ${_GL_${_component}_RUN_DEPENDS} -. endif -. endfor -. endif -.endif - -.if defined(USE_BISON) -BUILD_DEPENDS+= bison:${PORTSDIR}/devel/bison -.endif - -.if defined(USE_LOCAL_MK) -.include "${PORTSDIR}/Mk/bsd.local.mk" -.endif - -.if defined(USE_MYSQL) || defined(WANT_MYSQL_VER) || \ - defined(USE_PGSQL) || defined(WANT_PGSQL_VER) || \ - defined(USE_BDB) || defined(USE_SQLITE) || defined(USE_FIREBIRD) -.include "${PORTSDIR}/Mk/bsd.database.mk" -.endif - -.if defined(WANT_GSTREAMER) || defined(USE_GSTREAMER) || defined(USE_GSTREAMER80) -.include "${PORTSDIR}/Mk/bsd.gstreamer.mk" -.endif - -.if defined(USE_EFL) || defined(WANT_EFL) || defined(USE_EFL_ESMART) -.include "${PORTSDIR}/Mk/bsd.efl.mk" -.endif - -.if defined(USE_JAVA) -.include "${PORTSDIR}/Mk/bsd.java.mk" -.endif - -.if defined(USE_LINUX_RPM) -.include "${PORTSDIR}/Mk/bsd.linux-rpm.mk" -.endif - -.if defined (USE_QT_VER) && ${USE_QT_VER:L} == 4 -.include "${PORTSDIR}/Mk/bsd.qt.mk" -.endif - -.if defined(USE_SCONS) -.include "${PORTSDIR}/Mk/bsd.scons.mk" -.endif - -.if defined(USE_SDL) || defined(WANT_SDL) -.include "${PORTSDIR}/Mk/bsd.sdl.mk" -.endif - -#.if defined(USE_PERL5) || defined(USE_PERL5_BUILD) || defined(USE_PERL5_RUN) || defined(PERL_CONFIGURE) || defined(PERL_MODBUILD) -.include "${PORTSDIR}/Mk/bsd.perl.mk" -#.endif - -.if defined(USE_PHP) -.include "${PORTSDIR}/Mk/bsd.php.mk" -.endif - -.if defined(USE_PYTHON) -.include "${PORTSDIR}/Mk/bsd.python.mk" -.endif - -.if defined(USE_TCL) || defined(USE_TCL_BUILD) || defined(USE_TK) || defined(USE_TK_BUILD) -.include "${PORTSDIR}/Mk/bsd.tcl.mk" -.endif - -.if defined(USE_LUA) || defined(USE_LUA_NOT) -.include "${PORTSDIR}/Mk/bsd.lua.mk" -.endif - -.if defined(USE_WX) || defined(USE_WX_NOT) -.include "${PORTSDIR}/Mk/bsd.wx.mk" -.endif - -.if defined(USE_APACHE) || defined(APACHE_COMPAT) -.include "${PORTSDIR}/Mk/bsd.apache.mk" -.endif - -.if defined(USE_AUTOTOOLS) -.include "${PORTSDIR}/Mk/bsd.autotools.mk" -.endif - -.if defined(WANT_GNOME) || defined(USE_GNOME) || defined(USE_GTK) -.include "${PORTSDIR}/Mk/bsd.gnome.mk" -.endif - -.if defined(USE_XFCE) -.include "${PORTSDIR}/Mk/bsd.xfce.mk" -.endif - -.if exists(${PORTSDIR}/../Makefile.inc) -.include "${PORTSDIR}/../Makefile.inc" -USE_SUBMAKE= yes -.endif - -.if defined(USE_XLIB) -. if defined(USE_LINUX) -RUN_DEPENDS+= ${LINUXBASE}/usr/X11R6/lib/libXrender.so.1:${PORTSDIR}/x11/linux-xorg-libs -. else -. if ${X_WINDOW_SYSTEM:L} == xorg -BUILD_DEPENDS+= ${X11BASE}/libdata/xorg/libraries:${X_LIBRARIES_PORT} -RUN_DEPENDS+= ${X11BASE}/libdata/xorg/libraries:${X_LIBRARIES_PORT} -. else -LIB_DEPENDS+= X11.6:${X_LIBRARIES_PORT} -. endif -. endif -.endif - -.if defined(USE_XLIB) || defined(USE_XORG) -# Add explicit X options to avoid problems with false positives in configure -.if defined(GNU_CONFIGURE) -CONFIGURE_ARGS+=--x-libraries=${X11BASE}/lib --x-includes=${X11BASE}/include -.endif -.endif - -# Set the default for the installation of Postscript(TM)- -# compatible functionality. -.if !defined(WITHOUT_X11) -.if defined(WITH_GHOSTSCRIPT_GNU) -GHOSTSCRIPT_PORT?= print/ghostscript-gnu -.elif defined(WITH_GHOSTSCRIPT_AFPL) -GHOSTSCRIPT_PORT?= print/ghostscript-afpl -.else -GHOSTSCRIPT_PORT?= print/ghostscript-gpl -.endif -.else -.if defined(WITH_GHOSTSCRIPT_GNU) -GHOSTSCRIPT_PORT?= print/ghostscript-gnu-nox11 -.elif defined(WITH_GHOSTSCRIPT_AFPL) -GHOSTSCRIPT_PORT?= print/ghostscript-afpl-nox11 -.else -GHOSTSCRIPT_PORT?= print/ghostscript-gpl-nox11 -.endif -.endif - -# Set up the ghostscript dependencies. -.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_BUILD) -BUILD_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT} -.endif -.if defined(USE_GHOSTSCRIPT) || defined(USE_GHOSTSCRIPT_RUN) -RUN_DEPENDS+= gs:${PORTSDIR}/${GHOSTSCRIPT_PORT} -.endif - -# Set up the cdrtools. -.if defined(USE_CDRTOOLS) -.if exists(${DOCSDIR}/cdrtools-cjk/README) || defined(WITH_CJK) || ${USE_CDRTOOLS:L} == "cjk" -BUILD_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools-cjk -RUN_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools-cjk -.else -BUILD_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools -RUN_DEPENDS+= cdrecord:${PORTSDIR}/sysutils/cdrtools -.endif -.endif - -# Macro for doing in-place file editing using regexps -REINPLACE_ARGS?= -i.bak -REINPLACE_CMD?= ${SED} ${REINPLACE_ARGS} - -# Names of cookies used to skip already completed stages -EXTRACT_COOKIE?= ${WRKDIR}/.extract_done.${PORTNAME}.${PREFIX:S/\//_/g} -CONFIGURE_COOKIE?= ${WRKDIR}/.configure_done.${PORTNAME}.${PREFIX:S/\//_/g} -INSTALL_COOKIE?= ${WRKDIR}/.install_done.${PORTNAME}.${PREFIX:S/\//_/g} -BUILD_COOKIE?= ${WRKDIR}/.build_done.${PORTNAME}.${PREFIX:S/\//_/g} -PATCH_COOKIE?= ${WRKDIR}/.patch_done.${PORTNAME}.${PREFIX:S/\//_/g} -PACKAGE_COOKIE?= ${WRKDIR}/.package_done.${PORTNAME}.${PREFIX:S/\//_/g} - -# How to do nothing. Override if you, for some strange reason, would rather -# do something. -DO_NADA?= ${TRUE} - -# Use this as the first operand to always build dependency. -NONEXISTENT?= /nonexistent - -# Miscellaneous overridable commands: -GMAKE?= gmake -XMKMF?= xmkmf -a -.if exists(/sbin/md5) -MD5?= /sbin/md5 -.else -MD5?= md5 -.endif -.if exists(/sbin/sha256) -SHA256?= /sbin/sha256 -.elif exists(${LOCALBASE}/sbin/sha256) -SHA256?= ${LOCALBASE}/sbin/sha256 -.else -SHA256?= NO -.endif - -CHECKSUM_ALGORITHMS?= md5 sha256 - -MD5_FILE?= ${MASTERDIR}/distinfo - -MAKE_FLAGS?= -f -MAKEFILE?= Makefile -MAKE_ENV+= PREFIX=${PREFIX} \ - LOCALBASE=${LOCALBASE} X11BASE=${X11BASE} \ - MOTIFLIB="${MOTIFLIB}" LIBDIR="${LIBDIR}" CFLAGS="${CFLAGS}" \ - CXXFLAGS="${CXXFLAGS}" MANPREFIX="${MANPREFIX}" - -PTHREAD_CFLAGS?= -PTHREAD_LIBS?= -pthread - -.if exists(/usr/bin/fetch) -FETCH_BINARY?= /usr/bin/fetch -FETCH_ARGS?= -ApRr -FETCH_REGET?= 1 -.if !defined(DISABLE_SIZE) -FETCH_BEFORE_ARGS+= $${CKSIZE:+-S $$CKSIZE} -.endif -.else -FETCH_BINARY?= /usr/bin/ftp -FETCH_ARGS?= -R -FETCH_REGET?= 0 -.endif -FETCH_CMD?= ${FETCH_BINARY} ${FETCH_ARGS} - -.if defined(RANDOMIZE_MASTER_SITES) -.if exists(/usr/games/random) -RANDOM_CMD?= /usr/games/random -RANDOM_ARGS?= "-w -f -" -_RANDOMIZE_SITES= " |${RANDOM_CMD} ${RANDOM_ARGS}" -.endif -.endif - -TOUCH?= /usr/bin/touch -TOUCH_FLAGS?= -f - -DISTORIG?= .bak.orig -PATCH?= /usr/bin/patch -PATCH_STRIP?= -p0 -PATCH_DIST_STRIP?= -p0 -.if defined(PATCH_DEBUG) -PATCH_DEBUG_TMP= yes -PATCH_ARGS?= -d ${PATCH_WRKSRC} -E ${PATCH_STRIP} -PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} -E ${PATCH_DIST_STRIP} -.else -PATCH_DEBUG_TMP= no -PATCH_ARGS?= -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_STRIP} -PATCH_DIST_ARGS?= --suffix ${DISTORIG} -d ${PATCH_WRKSRC} --forward --quiet -E ${PATCH_DIST_STRIP} -.endif -.if defined(BATCH) -PATCH_ARGS+= --batch -PATCH_DIST_ARGS+= --batch -.endif - -# Prevent breakage with VERSION_CONTROL=numbered -PATCH_ARGS+= -V simple - -.if defined(PATCH_CHECK_ONLY) -PATCH_ARGS+= -C -PATCH_DIST_ARGS+= -C -.endif - -.if ${PATCH} == "/usr/bin/patch" -PATCH_ARGS+= --suffix .orig -PATCH_DIST_ARGS+= --suffix .orig -.endif - -TAR?= /usr/bin/tar - -# EXTRACT_SUFX is defined in .pre.mk section -.if defined(USE_ZIP) -EXTRACT_CMD?= ${UNZIP_CMD} -EXTRACT_BEFORE_ARGS?= -qo -EXTRACT_AFTER_ARGS?= -d ${WRKDIR} -.elif defined(USE_MAKESELF) -EXTRACT_CMD?= ${UNMAKESELF_CMD} -EXTRACT_BEFORE_ARGS?= -EXTRACT_AFTER_ARGS?= -.else -EXTRACT_BEFORE_ARGS?= -dc -.if defined(EXTRACT_PRESERVE_OWNERSHIP) -EXTRACT_AFTER_ARGS?= | ${TAR} -xf - --no-same-owner -.else -EXTRACT_AFTER_ARGS?= | ${TAR} -xf - -.endif -.if defined(USE_BZIP2) -EXTRACT_CMD?= ${BZIP2_CMD} -.else -EXTRACT_CMD?= ${GZIP_CMD} -.endif -.endif - -# Figure out where the local mtree file is -.if !defined(MTREE_FILE) && !defined(NO_MTREE) -.if ${PREFIX} == /usr -MTREE_FILE= /etc/mtree/BSD.usr.dist -.else -MTREE_FILE= ${PORTSDIR}/Templates/BSD.local.dist -.endif -.endif -MTREE_CMD?= /usr/sbin/mtree -MTREE_ARGS?= -U ${MTREE_FOLLOWS_SYMLINKS} -f ${MTREE_FILE} -d -e -p - -# Determine whether or not we can use rootly owner/group functions. -.if !defined(UID) -UID!= ${ID} -u -.endif -.if ${UID} == 0 -_BINOWNGRP= -o ${BINOWN} -g ${BINGRP} -_SHROWNGRP= -o ${SHAREOWN} -g ${SHAREGRP} -_MANOWNGRP= -o ${MANOWN} -g ${MANGRP} -.else -_BINOWNGRP= -_SHROWNGRP= -_MANOWNGRP= -.endif - -# A few aliases for *-install targets -INSTALL_PROGRAM= \ - ${INSTALL} ${COPY} ${STRIP} ${_BINOWNGRP} -m ${BINMODE} -INSTALL_SCRIPT= \ - ${INSTALL} ${COPY} ${_BINOWNGRP} -m ${BINMODE} -INSTALL_DATA= \ - ${INSTALL} ${COPY} ${_SHROWNGRP} -m ${SHAREMODE} -INSTALL_MAN= \ - ${INSTALL} ${COPY} ${_MANOWNGRP} -m ${MANMODE} - -INSTALL_MACROS= BSD_INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ - BSD_INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ - BSD_INSTALL_DATA="${INSTALL_DATA}" \ - BSD_INSTALL_MAN="${INSTALL_MAN}" -MAKE_ENV+= ${INSTALL_MACROS} -SCRIPTS_ENV+= ${INSTALL_MACROS} - -# Macro for coping entire directory tree with correct permissions -.if ${UID} == 0 -COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ - 2>&1) && \ - ${CHOWN} -R ${BINOWN}:${BINGRP} $$1 && \ - ${FIND} $$1 -type d -exec chmod 755 {} \; && \ - ${FIND} $$1 -type f -exec chmod ${BINMODE} {} \;' -- -COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ - 2>&1) && \ - ${CHOWN} -R ${SHAREOWN}:${SHAREGRP} $$1 && \ - ${FIND} $$1/ -type d -exec chmod 755 {} \; && \ - ${FIND} $$1/ -type f -exec chmod ${SHAREMODE} {} \;' -- -.else -COPYTREE_BIN= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ - 2>&1) && \ - ${FIND} $$1 -type d -exec chmod 755 {} \; && \ - ${FIND} $$1 -type f -exec chmod ${BINMODE} {} \;' -- -COPYTREE_SHARE= ${SH} -c '(${FIND} -d $$0 $$2 | ${CPIO} -dumpl $$1 >/dev/null \ - 2>&1) && \ - ${FIND} $$1/ -type d -exec chmod 755 {} \; && \ - ${FIND} $$1/ -type f -exec chmod ${SHAREMODE} {} \;' -- -.endif - -# The user can override the NO_PACKAGE by specifying this from -# the make command line -.if defined(FORCE_PACKAGE) -.undef NO_PACKAGE -.endif - -DESCR?= ${PKGDIR}/pkg-descr -PLIST?= ${PKGDIR}/pkg-plist -PKGINSTALL?= ${PKGDIR}/pkg-install -PKGDEINSTALL?= ${PKGDIR}/pkg-deinstall -PKGREQ?= ${PKGDIR}/pkg-req -PKGMESSAGE?= ${PKGDIR}/pkg-message - -TMPPLIST?= ${WRKDIR}/.PLIST.mktmp - -.for _CATEGORY in ${CATEGORIES} -PKGCATEGORY?= ${_CATEGORY} -.endfor -_PORTDIRNAME= ${.CURDIR:T} -PORTDIRNAME?= ${_PORTDIRNAME} -PKGORIGIN?= ${PKGCATEGORY}/${PORTDIRNAME} - - -.if ((${OSVERSION} < 504105 || (${OSVERSION} >= 600000 && ${OSVERSION} < 600103) || (${OSVERSION} >= 700000 && ${OSVERSION} < 700012)) && ${PKGORIGIN} != "ports-mgmt/pkg_install") || exists(${LOCALBASE}/sbin/pkg_info) -.if (${OSVERSION} < 504105 || (${OSVERSION} >= 600000 && ${OSVERSION} < 600103) || (${OSVERSION} >= 700000 && ${OSVERSION} < 700012)) && ${PKGORIGIN} != "ports-mgmt/pkg_install" -EXTRACT_DEPENDS+= ${LOCALBASE}/sbin/pkg_info:${PORTSDIR}/ports-mgmt/pkg_install -.endif -PKG_CMD?= ${LOCALBASE}/sbin/pkg_create -PKG_ADD?= ${LOCALBASE}/sbin/pkg_add -PKG_DELETE?= ${LOCALBASE}/sbin/pkg_delete -PKG_INFO?= ${LOCALBASE}/sbin/pkg_info -PKG_VERSION?= ${LOCALBASE}/sbin/pkg_version -.else -PKG_CMD?= /usr/sbin/pkg_create -PKG_ADD?= /usr/sbin/pkg_add -PKG_DELETE?= /usr/sbin/pkg_delete -PKG_INFO?= /usr/sbin/pkg_info -PKG_VERSION?= /usr/sbin/pkg_version -.endif - -# Does the pkg_create tool support conflict checking? -# XXX Slow? -.if !defined(PKGINSTALLVER) -PKGINSTALLVER!= ${PKG_INFO} -P 2>/dev/null | ${SED} -e 's/.*: //' -.endif -.if ${PKGINSTALLVER} < 20030417 -DISABLE_CONFLICTS= YES -.endif -.if !defined(PKG_ARGS) -PKG_ARGS= -v -c -${COMMENT:Q} -d ${DESCR} -f ${TMPPLIST} -p ${PREFIX} -P "`cd ${.CURDIR} && ${MAKE} actual-package-depends | ${GREP} -v -E ${PKG_IGNORE_DEPENDS} | ${SORT} -u`" ${EXTRA_PKG_ARGS} $${_LATE_PKG_ARGS} -.if !defined(NO_MTREE) -PKG_ARGS+= -m ${MTREE_FILE} -.endif -.if defined(PKGORIGIN) -PKG_ARGS+= -o ${PKGORIGIN} -.endif -.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS) -PKG_ARGS+= -C "${CONFLICTS}" -.endif -.endif -.if defined(PKG_NOCOMPRESS) -PKG_SUFX?= .tar -.else -PKG_SUFX?= .tbz -.endif -# where pkg_add records its dirty deeds. -PKG_DBDIR?= /var/db/pkg - -MOTIFLIB?= -L${X11BASE}/lib -lXm -lXp - -ALL_TARGET?= all -INSTALL_TARGET?= install - -# Popular master sites -.include "bsd.sites.mk" - -# Empty declaration to avoid "variable MASTER_SITES recursive" error -MASTER_SITES?= -PATCH_SITES?= -_MASTER_SITES_DEFAULT?= -_PATCH_SITES_DEFAULT?= - -# Feed internal _{MASTER,PATCH}_SITES_n where n is a group designation -# as per grouping rules (:something) -# Organize _{MASTER,PATCH}_SITES_{DEFAULT,[^/:]+} according to grouping -# rules (:something) -.for _S in ${MASTER_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -_G_TEMP= ${_group} -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default -check-makevars:: - @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" - @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITES" - @${FALSE} -. endif -_MASTER_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endfor -. else -_MASTER_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endif -.endfor -.for _S in ${PATCH_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -_G_TEMP= ${_group} -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default -check-makevars:: - @${ECHO_MSG} "The words all, ALL and default are reserved and cannot be" - @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITES" - @${FALSE} -. endif -_PATCH_SITES_${_group}+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endfor -. else -_PATCH_SITES_DEFAULT+= ${_S:C@^(.*/):[^/:]+$@\1@} -. endif -.endfor - -# Feed internal _{MASTER,PATCH}_SITE_SUBDIR_n where n is a group designation -# as per grouping rules (:something) -# Organize _{MASTER,PATCH}_SITE_SUBDIR_{DEFAULT,[^/:]+} according to grouping -# rules (:something) -.for _S in ${MASTER_SITE_SUBDIR} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -_G_TEMP= ${_group} -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default -check-makevars:: - @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" - @${ECHO_MSG} "used in group definitions. Please fix your MASTER_SITE_SUBDIR" - @${FALSE} -. endif -. if defined(_MASTER_SITES_${_group}) -_MASTER_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endfor -. else -. if defined(_MASTER_SITES_DEFAULT) -_MASTER_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endif -.endfor -.for _S in ${PATCH_SITE_SUBDIR} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -_G_TEMP= ${_group} -. if ${_G_TEMP} == all || ${_G_TEMP} == ALL || ${_G_TEMP} == default -check-makevars:: - @${ECHO_MSG} "Makefile error: the words all, ALL and default are reserved and cannot be" - @${ECHO_MSG} "used in group definitions. Please fix your PATCH_SITE_SUBDIR" - @${FALSE} -. endif -. if defined(_PATCH_SITES_${_group}) -_PATCH_SITE_SUBDIR_${_group}+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endfor -. else -. if defined(_PATCH_SITES_DEFAULT) -_PATCH_SITE_SUBDIR_DEFAULT+= ${_S:C@^(.*)/:[^/:]+$@\1@} -. endif -. endif -.endfor - -# Substitute subdirectory names -# XXX simpler/faster solution but not the best space wise, suggestions please -.for _S in ${MASTER_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -. if !defined(_MASTER_SITE_SUBDIR_${_group}) -MASTER_SITES_TMP= ${_MASTER_SITES_${_group}:S^%SUBDIR%/^^} -. else -_S_TEMP_TEMP= ${_MASTER_SITES_${_group}:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -MASTER_SITES_TMP= ${_MASTER_SITES_${_group}} -. else -MASTER_SITES_TMP= -. for site in ${_MASTER_SITES_${_group}} -_S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -MASTER_SITES_TMP+= ${site} -. else -. for dir in ${_MASTER_SITE_SUBDIR_${_group}} -MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -. endif -_MASTER_SITES_${_group}:= ${MASTER_SITES_TMP} -. endfor -. endif -.endfor -.if defined(_MASTER_SITE_SUBDIR_DEFAULT) -_S_TEMP= ${_MASTER_SITES_DEFAULT:M*%SUBDIR%/*} -. if empty(_S_TEMP) -MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT} -. else -MASTER_SITES_TMP= -. for site in ${_MASTER_SITES_DEFAULT} -_S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -MASTER_SITES_TMP+= ${site} -. else -. for dir in ${_MASTER_SITE_SUBDIR_DEFAULT} -MASTER_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -.else -MASTER_SITES_TMP= ${_MASTER_SITES_DEFAULT:S^%SUBDIR%/^^} -.endif -_MASTER_SITES_DEFAULT:= ${MASTER_SITES_TMP} -MASTER_SITES_TMP= -.for _S in ${PATCH_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//:S/^://} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/,/ /g} -. if !defined(_PATCH_SITE_SUBDIR_${_group}) -PATCH_SITES_TMP= ${_PATCH_SITES_${_group}:S^%SUBDIR%/^^} -. else -_S_TEMP_TEMP= ${_PATCH_SITES_${_group}:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -PATCH_SITES_TMP= ${_PATCH_SITES_${_group}} -. else -PATCH_SITES_TMP= -. for site in ${_PATCH_SITES_${_group}} -_S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -PATCH_SITES_TMP+= ${site} -. else -. for dir in ${_PATCH_SITE_SUBDIR_${_group}} -PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -. endif -_PATCH_SITES_${_group}:= ${PATCH_SITES_TMP} -. endfor -. endif -.endfor -.if defined(_PATCH_SITE_SUBDIR_DEFAULT) -_S_TEMP= ${_PATCH_SITES_DEFAULT:M*%SUBDIR%/*} -. if empty(_S_TEMP) -PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT} -. else -PATCH_SITES_TMP= -. for site in ${_PATCH_SITES_DEFAULT} -_S_TEMP_TEMP= ${site:M*%SUBDIR%/*} -. if empty(_S_TEMP_TEMP) -PATCH_SITES_TMP+= ${site} -. else -. for dir in ${_PATCH_SITE_SUBDIR_DEFAULT} -PATCH_SITES_TMP+= ${site:S^%SUBDIR%^\${dir}^} -. endfor -. endif -. endfor -. endif -.else -PATCH_SITES_TMP= ${_PATCH_SITES_DEFAULT:S^%SUBDIR%/^^} -.endif -_PATCH_SITES_DEFAULT:= ${PATCH_SITES_TMP} -PATCH_SITES_TMP= - -# The primary backup site. -MASTER_SITE_BACKUP?= \ - ftp://ftp.FreeBSD.org/pub/FreeBSD/ports/distfiles/${DIST_SUBDIR}/ -MASTER_SITE_BACKUP:= ${MASTER_SITE_BACKUP:S^\${DIST_SUBDIR}/^^} - -# If the user has MASTER_SITE_FREEBSD set, go to the FreeBSD repository -# for everything, but don't search it twice by appending it to the end. -.if defined(MASTER_SITE_FREEBSD) -_MASTER_SITE_OVERRIDE:= ${MASTER_SITE_BACKUP} -_MASTER_SITE_BACKUP:= # empty -.else -_MASTER_SITE_OVERRIDE= ${MASTER_SITE_OVERRIDE} -_MASTER_SITE_BACKUP= ${MASTER_SITE_BACKUP} -.endif - -# Search CDROM first if mounted, symlink instead of copy if -# FETCH_SYMLINK_DISTFILES is set -.for MOUNTPT in ${CD_MOUNTPTS} -.if exists(${MOUNTPT}/ports/distfiles) -_MASTER_SITE_OVERRIDE:= file:${MOUNTPT}/ports/distfiles/${DIST_SUBDIR}/ ${_MASTER_SITE_OVERRIDE} -.if defined(FETCH_SYMLINK_DISTFILES) -FETCH_BEFORE_ARGS+= -l -.endif -.endif -.endfor - -NOFETCHFILES?= - -# Organize DISTFILES, PATCHFILES, _MASTER_SITES_ALL, _PATCH_SITES_ALL -# according to grouping rules (:something) -DISTFILES?= ${DISTNAME}${EXTRACT_SUFX} -_MASTER_SITES_ALL= ${_MASTER_SITES_DEFAULT} -_PATCH_SITES_ALL= ${_PATCH_SITES_DEFAULT} -_G_TEMP= DEFAULT -.for _D in ${DISTFILES} -_D_TEMP= ${_D:S/^${_D:C/:[^:]+$//}//} -. if !empty(_D_TEMP) -. for _group in ${_D_TEMP:S/^://:S/,/ /g} -. if !defined(_MASTER_SITES_${_group}) -_G_TEMP_TEMP= ${_G_TEMP:M/${_group}/} -. if empty(_G_TEMP_TEMP) -_G_TEMP+= ${_group} -_MASTER_SITES_ALL+= ${_MASTER_SITES_${_group}} -. endif -. endif -. endfor -_DISTFILES+= ${_D:C/:[^:]+$//} -. else -_DISTFILES+= ${_D} -. endif -.endfor -_G_TEMP= DEFAULT -.for _P in ${PATCHFILES} -_P_TEMP= ${_P:S/^${_P:C/:[^:]+$//}//} -. if !empty(_P_TEMP) -. for _group in ${_P_TEMP:S/^://:S/,/ /g} -. if !defined(_PATCH_SITES_${_group}) -_G_TEMP_TEMP= ${_G_TEMP:M/${_group}/} -. if empty(_G_TEMP_TEMP) -_G_TEMP+= ${_group} -_PATCH_SITES_ALL+= ${_PATCH_SITES_${_group}} -. endif -. endif -. endfor -_PATCHFILES+= ${_P:C/:[^:]+$//} -. else -_PATCHFILES+= ${_P} -. endif -.endfor -_G_TEMP= -_G_TEMP_TEMP= -ALLFILES?= ${_DISTFILES} ${_PATCHFILES} - -# -# Sort the master site list according to the patterns in MASTER_SORT -# -MASTER_SORT?= -MASTER_SORT_REGEX?= -MASTER_SORT_REGEX+= ${MASTER_SORT:S|.|\\.|g:S|^|://[^/]*|:S|$|/|} - -MASTER_SORT_AWK= BEGIN { RS = " "; ORS = " "; IGNORECASE = 1 ; gl = "${MASTER_SORT_REGEX:S|\\|\\\\|g}"; } -.for srt in ${MASTER_SORT_REGEX} -MASTER_SORT_AWK+= /${srt:S|/|\\/|g}/ { good["${srt:S|\\|\\\\|g}"] = good["${srt:S|\\|\\\\|g}"] " " $$0 ; next; } -.endfor -MASTER_SORT_AWK+= { rest = rest " " $$0; } END { n=split(gl, gla); for(i=1;i<=n;i++) { print good[gla[i]]; } print rest; } - -SORTED_MASTER_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} master-sites-DEFAULT -SORTED_PATCH_SITES_DEFAULT_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-sites-DEFAULT -SORTED_MASTER_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} master-sites-ALL -SORTED_PATCH_SITES_ALL_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-sites-ALL - -# -# Sort the master site list according to the patterns in MASTER_SORT -# according to grouping rules (:something) -# -# for use in the fetch targets -.for _S in ${MASTER_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/^://:S/,/ /g} -. if !target(master-sites-${_group}) -SORTED_MASTER_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} master-sites-${_group} -master-sites-${_group}: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} -. endif -. endfor -. endif -.endfor -.for _S in ${PATCH_SITES} -_S_TEMP= ${_S:S/^${_S:C@/:[^/:]+$@/@}//} -. if !empty(_S_TEMP) -. for _group in ${_S_TEMP:S/^://:S/,/ /g} -. if !target(patch-sites-${_group}) -SORTED_PATCH_SITES_${_group}_CMD= cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} patch-sites-${_group} -patch-sites-${_group}: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_${_group}}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} -. endif -. endfor -. endif -.endfor - -# -# Hackery to enable simple fetch targets with several dynamic MASTER_SITES -# -_MASTER_SITES_ENV= _MASTER_SITES_DEFAULT="${_MASTER_SITES_DEFAULT}" -.for _F in ${DISTFILES} -_F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://} -. if !empty(_F_TEMP) -. for _group in ${_F_TEMP:S/,/ /g} -. if defined(_MASTER_SITES_${_group}) -_MASTER_SITES_ENV+= _MASTER_SITES_${_group}="${_MASTER_SITES_${_group}}" -. endif -. endfor -. endif -.endfor -_PATCH_SITES_ENV= _PATCH_SITES_DEFAULT="${_PATCH_SITES_DEFAULT}" -.for _F in ${PATCHFILES} -_F_TEMP= ${_F:S/^${_F:C/:[^:]+$//}//:S/^://} -. if !empty(_F_TEMP) -. for _group in ${_F_TEMP:S/,/ /g} -. if defined(_PATCH_SITES_${_group}) -_PATCH_SITES_ENV+= _PATCH_SITES_${_group}="${_PATCH_SITES_${_group}}" -. endif -. endfor -. endif -.endfor - -master-sites-ALL: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} -patch-sites-ALL: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_ALL}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} -# has similar effect to old targets, i.e., access only {MASTER,PATCH}_SITES, not working with the new _n variables -master-sites-DEFAULT: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_MASTER_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} -patch-sites-DEFAULT: - @${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} '${_PATCH_SITES_DEFAULT}' | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP} - -# synonyms, mnemonics -master-sites-all: master-sites-ALL -patch-sites-all: patch-sites-ALL -master-sites-default: master-sites-DEFAULT -patch-sites-default: patch-sites-DEFAULT - -# compatibility with old behavior -master-sites: master-sites-DEFAULT -patch-sites: patch-sites-DEFAULT - -.if defined(IGNOREFILES) -.if !defined(CKSUMFILES) -CKSUMFILES!= \ - for file in ${ALLFILES}; do \ - ignore=0; \ - for tmp in ${IGNOREFILES}; do \ - if [ "$$file" = "$$tmp" ]; then \ - ignore=1; \ - fi; \ - done; \ - if [ "$$ignore" = 0 ]; then \ - ${ECHO_CMD} "$$file"; \ - fi; \ - done -.endif -.else -CKSUMFILES= ${ALLFILES} -.endif - -# List of all files, with ${DIST_SUBDIR} in front. Used for checksum. -.if defined(DIST_SUBDIR) -.if defined(CKSUMFILES) && ${CKSUMFILES}!="" -_CKSUMFILES?= ${CKSUMFILES:S/^/${DIST_SUBDIR}\//} -.endif -.if defined(IGNOREFILES) && ${IGNOREFILES}!="" -_IGNOREFILES?= ${IGNOREFILES:S/^/${DIST_SUBDIR}\//} -.endif -.else -_CKSUMFILES?= ${CKSUMFILES} -_IGNOREFILES?= ${IGNOREFILES} -.endif - -# This is what is actually going to be extracted, and is overridable -# by user. -EXTRACT_ONLY?= ${_DISTFILES} - -.if !target(maintainer) -maintainer: - @${ECHO_CMD} "${MAINTAINER}" -.endif - -.if !target(check-makefile) -check-makefile:: - @${DO_NADA} -.endif - -.if !defined(CATEGORIES) -check-categories: - @${ECHO_MSG} "${PKGNAME}: Makefile error: CATEGORIES is mandatory." - @${FALSE} -.else - -VALID_CATEGORIES+= accessibility afterstep arabic archivers astro audio \ - benchmarks biology cad chinese comms converters databases \ - deskutils devel dns editors elisp emulators finance french ftp \ - games geography german gnome gnustep graphics hamradio haskell hebrew hungarian \ - ipv6 irc japanese java kde kld korean lang linux lisp \ - mail math mbone misc multimedia net net-im net-mgmt net-p2p news \ - palm parallel pear perl5 plan9 polish portuguese ports-mgmt \ - print python ruby rubygems russian \ - scheme science security shells spanish sysutils \ - tcl tcl80 tcl82 tcl83 tcl84 textproc \ - tk tk80 tk82 tk83 tk84 tkstep80 \ - ukrainian vietnamese windowmaker www \ - x11 x11-clocks x11-drivers x11-fm x11-fonts x11-servers x11-themes \ - x11-toolkits x11-wm xfce zope - -check-categories: -.for cat in ${CATEGORIES} - @if ${ECHO_CMD} ${VALID_CATEGORIES} | ${GREP} -wq ${cat}; then \ - ${TRUE}; \ - else \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: category ${cat} not in list of valid categories."; \ - ${FALSE}; \ - fi -.endfor -.endif - -.if !target(check-makevars) -check-makevars:: - @${DO_NADA} -.endif - -.if !target(check-depends) -check-depends: - @${DO_NADA} -.endif - -PKGREPOSITORYSUBDIR?= All -PKGREPOSITORY?= ${PACKAGES}/${PKGREPOSITORYSUBDIR} -.if exists(${PACKAGES}) -PKGFILE?= ${PKGREPOSITORY}/${PKGNAME}${PKG_SUFX} -.else -PKGFILE?= ${.CURDIR}/${PKGNAME}${PKG_SUFX} -.endif - -# The "latest version" link -- ${PKGNAME} minus everthing after the last '-' -PKGLATESTREPOSITORY?= ${PACKAGES}/Latest -PKGBASE?= ${PKGNAMEPREFIX}${PORTNAME}${PKGNAMESUFFIX} -LATEST_LINK?= ${PKGBASE} -PKGLATESTFILE= ${PKGLATESTREPOSITORY}/${LATEST_LINK}${PKG_SUFX} - -CONFIGURE_SCRIPT?= configure -CONFIGURE_TARGET?= ${ARCH}-portbld-freebsd${OSREL} -CONFIGURE_LOG?= config.log - -# A default message to print if do-configure fails. -CONFIGURE_FAIL_MESSAGE?= "Please report the problem to ${MAINTAINER} [maintainer] and attach the \"${CONFIGURE_WRKSRC}/${CONFIGURE_LOG}\" including the output of the failure of your make command. Also, it might be a good idea to provide an overview of all packages installed on your system (e.g. an \`ls ${PKG_DBDIR}\`)." - -.if defined(GNU_CONFIGURE) -# Maximum command line length -.if !defined(CONFIGURE_MAX_CMD_LEN) -CONFIGURE_MAX_CMD_LEN!= ${SYSCTL} -n kern.argmax -.endif -CONFIGURE_ARGS+= --prefix=${PREFIX} $${_LATE_CONFIGURE_ARGS} ${CONFIGURE_TARGET} -CONFIGURE_ENV+= lt_cv_sys_max_cmd_len=${CONFIGURE_MAX_CMD_LEN} -HAS_CONFIGURE= yes - -SET_LATE_CONFIGURE_ARGS= \ - _LATE_CONFIGURE_ARGS="" ; \ - if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--mandir'`" ]; then \ - _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --mandir=${MANPREFIX}/man" ; \ - fi ; \ - if [ ! -z "`./${CONFIGURE_SCRIPT} --help 2>&1 | ${GREP} -- '--infodir'`" ]; then \ - _LATE_CONFIGURE_ARGS="$${_LATE_CONFIGURE_ARGS} --infodir=${PREFIX}/${INFO_PATH}/${INFO_SUBDIR}" ; \ - fi ; -.endif - -# Passed to most of script invocations -SCRIPTS_ENV+= CURDIR=${MASTERDIR} DISTDIR=${DISTDIR} \ - WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} PATCHDIR=${PATCHDIR} \ - SCRIPTDIR=${SCRIPTDIR} FILESDIR=${FILESDIR} \ - PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} LOCALBASE=${LOCALBASE} \ - X11BASE=${X11BASE} - -.if defined(BATCH) -SCRIPTS_ENV+= BATCH=yes -.endif - -.if ${PREFIX} == /usr -MANPREFIX?= /usr/share -.else -MANPREFIX?= ${PREFIX} -.endif - -.for sect in 1 2 3 4 5 6 7 8 9 -MAN${sect}PREFIX?= ${MANPREFIX} -.endfor -MANLPREFIX?= ${MANPREFIX} -MANNPREFIX?= ${MANPREFIX} - -MANLANG?= "" # english only by default - -.if !defined(NOMANCOMPRESS) -MANEXT= .gz -.endif - -.if (defined(MLINKS) || defined(_MLINKS_PREPEND)) && !defined(_MLINKS) -__pmlinks!= ${ECHO_CMD} '${MLINKS:S/ / /}' | ${AWK} \ - '{ if (NF % 2 != 0) { print "broken"; exit; } \ - for (i=1; i<=NF; i++) { \ - if ($$i ~ /^-$$/ && i != 1 && i % 2 != 0) \ - { $$i = $$(i-2); printf " " $$i " "; } \ - else if ($$i ~ /^[^ ]+\.[1-9ln][^. ]*$$/ || $$i ~ /^\//) \ - printf " " $$i " "; \ - else \ - { print "broken"; exit; } \ - } \ - }' | ${SED} -e 's \([^/ ][^ ]*\.\(.\)[^. ]*\) $${MAN\2PREFIX}/$$$$$$$${__lang}/man\2/\1${MANEXT}g' -e 's/ //g' -e 's/MANlPREFIX/MANLPREFIX/g' -e 's/MANnPREFIX/MANNPREFIX/g' -.if ${__pmlinks:Mbroken} == "broken" -check-makevars:: - @${ECHO_MSG} "${PKGNAME}: Makefile error: unable to parse MLINKS." - @${FALSE} -.endif -_MLINKS= ${_MLINKS_PREPEND} -# XXX 20040119 This next line should read: -# .for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%} -# but there is currently a bug in make(1) that prevents the double-quote -# substitution from working correctly. Once that problem is addressed, -# and has had a enough time to mature, this hack should be removed. -.for lang in ${MANLANG:S%^%man/%:S%^man/""$%man%:S%^man/"$%man%} -.for ___pmlinks in ${__pmlinks} -.for __lang in ${lang} -_MLINKS+= ${___pmlinks:S// /g} -.endfor -.endfor -.endfor -.endif -_COUNT=0 -.for ___tpmlinks in ${_MLINKS} -.if ${_COUNT} == "1" -_TMLINKS+= ${___tpmlinks} -_COUNT=0 -.else -_COUNT=1 -.endif -.endfor - -# XXX 20040119 This next line should read: -# .for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%} -# but there is currently a bug in make(1) that prevents the double-quote -# substitution from working correctly. Once that problem is addressed, -# and has had a enough time to mature, this hack should be removed. -.for manlang in ${MANLANG:S%^%man/%:S%^man/""$%man%:S%^man/"$%man%} - -.for sect in 1 2 3 4 5 6 7 8 9 L N -# MAN${sect} is for man pages installed for all languages in MANLANG for a given -# section. -.if defined(MAN${sect}) -_MANPAGES+= ${MAN${sect}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%} -.endif - -# Language specific MAN${sect} variables are for man pages installed in that -# language, but not necessarily all languages in MANLANG. -.if defined(MAN${sect}_${manlang:S%^man/%%:U}) -_MANPAGES+= ${MAN${sect}_${manlang:S%^man/%%:U}:S%^%${MAN${sect}PREFIX}/${manlang}/man${sect:L}/%} -.endif - -.endfor - -.endfor - -# Special case for English, since it is defined with "" in MANLANG rather than -# a language name and does not have man pages installed in a lang subdirectory -# of MAN${sect}PREFIX. -.for sect in 1 2 3 4 5 6 7 8 9 L N -.if defined(MAN${sect}_EN) -_MANPAGES+= ${MAN${sect}_EN:S%^%${MAN${sect}PREFIX}/man/man${sect:L}/%} -.endif -.endfor - -.if !defined(_TMLINKS) -_TMLINKS= -.endif - -.if defined(_MANPAGES) - -.if defined(NOMANCOMPRESS) -__MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%} -.else -__MANPAGES:= ${_MANPAGES:S%^${PREFIX}/%%:S%$%.gz%} -.endif - -.if ${MANCOMPRESSED} == "yes" -_MANPAGES:= ${_MANPAGES:S%$%.gz%} -.endif - -.endif - -.if ${PREFIX} == /usr -INFO_PATH?= share/info -.else -INFO_PATH?= info -.endif - -.if defined(INFO) -. for D in ${INFO:H} -RD:= ${D} -. if ${RD} != "." -. if !defined(INFO_SUBDIR) -INFO_SUBDIR:= ${RD} -. elif ${INFO_SUBDIR} != ${RD} -BROKEN= only one subdirectory in INFO is allowed -. endif -. endif -.undef RD -. endfor -.endif - -DOCSDIR_REL?= ${DOCSDIR:S,^${PREFIX}/,,} -EXAMPLESDIR_REL?= ${EXAMPLESDIR:S,^${PREFIX}/,,} -DATADIR_REL?= ${DATADIR:S,^${PREFIX}/,,} -WWWDIR_REL?= ${WWWDIR:S,^${PREFIX}/,,} -ETCDIR_REL?= ${ETCDIR:S,^${PREFIX}/,,} - -PLIST_SUB+= DOCSDIR="${DOCSDIR_REL}" \ - EXAMPLESDIR="${EXAMPLESDIR_REL}" \ - DATADIR="${DATADIR_REL}" \ - WWWDIR="${WWWDIR_REL}" \ - ETCDIR="${ETCDIR_REL}" - -DESKTOPDIR?= ${PREFIX}/share/applications -_DESKTOPDIR_REL= ${DESKTOPDIR:S,^${PREFIX}/,,}/ - -.if ${_DESKTOPDIR_REL} == ${DESKTOPDIR}/ -# DESKTOPDIR is not beneath PREFIX -_DESKTOPDIR_REL= -.endif - -# Put this as far down as possible so it will catch all PLIST_SUB definitions. - -.if defined(INSTALLS_SHLIB) -LDCONFIG_DIRS?= %%PREFIX%%/lib -LDCONFIG_PLIST!= ${ECHO_CMD} ${LDCONFIG_DIRS} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -LDCONFIG_RUNLIST!= ${ECHO_CMD} ${LDCONFIG_PLIST} | ${SED} -e "s!%D!${PREFIX}!g" -.endif - -.MAIN: all - -################################################################ -# Many ways to disable a port. -# -# If we're in BATCH mode and the port is interactive, or we're -# in interactive mode and the port is non-interactive, skip all -# the important targets. The reason we have two modes is that -# one might want to leave a build in BATCH mode running -# overnight, then come back in the morning and do _only_ the -# interactive ones that required your intervention. -# -# Ignore ports that can't be resold if building for a CDROM. -# -# Don't build a port if it's restricted and we don't want to get -# into that. -# -# Don't build a port if it's broken, unless we're running a parallel -# build (in case it's fixed). -# -# Don't build a port if it's forbidden for whatever reason. -# -# Don't build a port if the system is too old. -################################################################ - -# Check the machine architectures -.if defined(ONLY_FOR_ARCHS) -.for __ARCH in ${ONLY_FOR_ARCHS} -.if ${ARCH:M${__ARCH}} != "" -__ARCH_OK?= 1 -.endif -.endfor -.else -__ARCH_OK?= 1 -.endif - -.if defined(NOT_FOR_ARCHS) -.for __NARCH in ${NOT_FOR_ARCHS} -.if ${ARCH:M${__NARCH}} != "" -.undef __ARCH_OK -.endif -.endfor -.endif - -.if !defined(__ARCH_OK) -.if defined(ONLY_FOR_ARCHS) -IGNORE= is only for ${ONLY_FOR_ARCHS}, -.else # defined(NOT_FOR_ARCHS) -IGNORE= does not run on ${NOT_FOR_ARCHS}, -.endif -IGNORE+= while you are running ${ARCH} - -.if defined(ONLY_FOR_ARCHS_REASON_${ARCH}) -IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON_${ARCH}}) -.elif defined(ONLY_FOR_ARCHS_REASON) -IGNORE+= (reason: ${ONLY_FOR_ARCHS_REASON}) -.endif - -.if defined(NOT_FOR_ARCHS_REASON_${ARCH}) -IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON_${ARCH}}) -.elif defined(NOT_FOR_ARCHS_REASON) -IGNORE+= (reason: ${NOT_FOR_ARCHS_REASON}) -.endif - -.endif - -# Check the user interaction and legal issues -.if !defined(NO_IGNORE) -.if (defined(IS_INTERACTIVE) && defined(BATCH)) -IGNORE= is an interactive port -.elif (!defined(IS_INTERACTIVE) && defined(INTERACTIVE)) -IGNORE= is not an interactive port -.elif (defined(NO_CDROM) && defined(FOR_CDROM)) -IGNORE= may not be placed on a CDROM: ${NO_CDROM} -.elif (defined(RESTRICTED) && defined(NO_RESTRICTED)) -IGNORE= is restricted: ${RESTRICTED} -.elif defined(BROKEN) -.if !defined(TRYBROKEN) -IGNORE= is marked as broken: ${BROKEN} -.endif -.elif defined(FORBIDDEN) -IGNORE= is forbidden: ${FORBIDDEN} -.endif - -.if (defined(MANUAL_PACKAGE_BUILD) && defined(PACKAGE_BUILDING)) -IGNORE= has to be built manually: ${MANUAL_PACKAGE_BUILD} -clean: - @${IGNORECMD} -.endif - -.if defined(IGNORE) -.if defined(IGNORE_SILENT) -IGNORECMD= ${DO_NADA} -.else -IGNORECMD= ${ECHO_MSG} "===> ${PKGNAME} "${IGNORE:Q}.;exit 1 -.endif - -.for target in check-sanity fetch checksum extract patch configure all build install reinstall package -.if !target(${target}) -${target}: - @${IGNORECMD} -.if defined(INSTALLS_DEPENDS) - @${FALSE} -.endif -.endif -.endfor - -.endif - -.endif - -.if defined(IGNORE) || defined(NO_PACKAGE) -ignorelist: package-name -.else -ignorelist: - @${DO_NADA} -.endif - -.if defined(IGNORE) || defined(NO_PACKAGE) -ignorelist-verbose: -.if defined(IGNORE) - @${ECHO_MSG} "${PKGNAME}|IGNORE: "${IGNORE:Q} -.else - @${ECHO_MSG} "${PKGNAME}|NO_PACKAGE: "${NO_PACKAGE:Q} -.endif -.else -ignorelist-verbose: - @${DO_NADA} -.endif - -################################################################ -# Clean directories for ftp or CDROM. -################################################################ - -.if defined(RESTRICTED) -clean-restricted: delete-distfiles delete-package -clean-restricted-list: delete-distfiles-list delete-package-list -RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES} -.else -clean-restricted: -clean-restricted-list: -.endif - -.if defined(NO_CDROM) -clean-for-cdrom: delete-distfiles delete-package -clean-for-cdrom-list: delete-distfiles-list delete-package-list -RESTRICTED_FILES?= ${_DISTFILES} ${_PATCHFILES} -.else -clean-for-cdrom: -clean-for-cdrom-list: -.endif - -.if defined(ALL_HOOK) -all: - @cd ${.CURDIR} && ${SETENV} CURDIR=${.CURDIR} DISTNAME=${DISTNAME} \ - DISTDIR=${DISTDIR} WRKDIR=${WRKDIR} WRKSRC=${WRKSRC} \ - PATCHDIR=${PATCHDIR} SCRIPTDIR=${SCRIPTDIR} \ - FILESDIR=${FILESDIR} PORTSDIR=${PORTSDIR} PREFIX=${PREFIX} \ - BUILD_DEPENDS="${BUILD_DEPENDS}" RUN_DEPENDS="${RUN_DEPENDS}" X11BASE=${X11BASE} \ - CONFLICTS="${CONFLICTS}" \ - ${ALL_HOOK} -.endif - -.if !target(all) -all: build -.endif - -.if !defined(DEPENDS_TARGET) -.if defined(DEPENDS_PRECLEAN) -DEPENDS_TARGET= clean -DEPENDS_ARGS= NOCLEANDEPENDS=yes -.endif -.if make(reinstall) -DEPENDS_TARGET+= reinstall -.else -DEPENDS_TARGET+= install -.endif -.if defined(DEPENDS_CLEAN) -DEPENDS_TARGET+= clean -DEPENDS_ARGS+= NOCLEANDEPENDS=yes -.endif -.endif - -################################################################ -# -# Do preliminary work to detect if we need to run the config -# target or not. -# -################################################################ -.if (!defined(OPTIONS) || defined(CONFIG_DONE) || \ - defined(PACKAGE_BUILDING) || defined(BATCH)) -_OPTIONS_OK=yes -.endif - -################################################################ -# The following are used to create easy dummy targets for -# disabling some bit of default target behavior you don't want. -# They still check to see if the target exists, and if so don't -# do anything, since you might want to set this globally for a -# group of ports in a Makefile.inc, but still be able to -# override from an individual Makefile. -################################################################ - -# Disable checksum -.if defined(NO_CHECKSUM) && !target(checksum) -checksum: fetch - @${DO_NADA} -.endif - -# Disable build -.if defined(NO_BUILD) && !target(build) -build: configure - @${TOUCH} ${TOUCH_FLAGS} ${BUILD_COOKIE} -.endif - -# Disable install -.if defined(NO_INSTALL) && !target(install) -install: build - @${TOUCH} ${TOUCH_FLAGS} ${INSTALL_COOKIE} -.endif - -# Disable package -.if defined(NO_PACKAGE) && !target(package) -package: -.if defined(IGNORE_SILENT) - @${DO_NADA} -.else - @${ECHO_MSG} "===> ${PKGNAME} may not be packaged: "${NO_PACKAGE:Q}. -.endif -.endif - -# Disable describe -.if defined(NO_DESCRIBE) && !target(describe) -describe: - @${DO_NADA} -.endif - -################################################################ -# More standard targets start here. -# -# These are the body of the build/install framework. If you are -# not happy with the default actions, and you can't solve it by -# adding pre-* or post-* targets/scripts, override these. -################################################################ - -# Pre-everything - -# XXX MCL suggests deprecating this in favor of something -# less likely to be abused by overloading -pre-everything:: - @${DO_NADA} - -buildanyway-message: -.if defined(TRYBROKEN) && defined(BROKEN) - @${ECHO_MSG} "Trying build of ${PKGNAME} even though it is marked BROKEN." -.else - @${DO_NADA} -.endif - -options-message: -.if defined(GNOME_OPTION_MSG) && (!defined(PACKAGE_BUILDING) || !defined(BATCH)) - @for m in ${GNOME_OPTION_MSG}; do \ - ${ECHO_MSG} $$m; \ - done -.else - @${DO_NADA} -.endif -.if defined(_OPTIONS_READ) - @${ECHO_MSG} "===> Found saved configuration for ${_OPTIONS_READ}" -.if ${OPTIONSFILE} != ${_OPTIONSFILE} - @${ECHO_MSG} "===> *** CAUTION *** Using wrong configuration file ${_OPTIONSFILE}" -.endif -.endif - - -# Warn user about deprecated packages. Advisory only. - -.if !target(check-deprecated) -check-deprecated: -.if defined(DEPRECATED) - @${ECHO_MSG} "===> NOTICE:" - @${ECHO_MSG} - @${ECHO_MSG} "This port is deprecated; you may wish to reconsider installing it:" - @${ECHO_MSG} - @${ECHO_MSG} ${DEPRECATED:Q}. - @${ECHO_MSG} -.if defined(EXPIRATION_DATE) - @${ECHO_MSG} "It is scheduled to be removed on or after ${EXPIRATION_DATE}." - @${ECHO_MSG} -.endif -.endif -.endif - -# Check if the port is listed in the vulnerability database - -AUDITFILE?= /var/db/portaudit/auditfile.tbz -_EXTRACT_AUDITFILE= ${TAR} -jxOf "${AUDITFILE}" auditfile - -check-vulnerable: -.if !defined(DISABLE_VULNERABILITIES) && !defined(PACKAGE_BUILDING) - @if [ -f "${AUDITFILE}" ]; then \ - audit_created=`${_EXTRACT_AUDITFILE} | \ - ${SED} -nEe "1s/^#CREATED: *([0-9]{4})-?([0-9]{2})-?([0-9]{2}).*$$/\1\2\3/p"`; \ - audit_expiry=`/bin/date -u -v-14d "+%Y%m%d"`; \ - if [ "$$audit_created" -lt "$$audit_expiry" ]; then \ - ${ECHO_MSG} "===> WARNING: Vulnerability database out of date, checking anyway"; \ - fi; \ - vlist=`${_EXTRACT_AUDITFILE} | ${GREP} "${PORTNAME}" | \ - ${AWK} -F\| ' /^[^#]/ { \ - if (!system("${PKG_VERSION} -T \"${PKGNAME}\" \"" $$1 "\"")) \ - print "=> " $$3 ".\n Reference: <" $$2 ">" \ - } \ - '`; \ - if [ -n "$$vlist" ]; then \ - ${ECHO_MSG} "===> ${PKGNAME} has known vulnerabilities:"; \ - ${ECHO_MSG} "$$vlist"; \ - ${ECHO_MSG} "=> Please update your ports tree and try again."; \ - exit 1; \ - fi; \ - else \ - ${ECHO_MSG} "===> Vulnerability check disabled, database not found"; \ - fi -.endif - -# set alg to any of SIZE, MD5, SHA256 (or any other checksum algorithm): -DISTINFO_DATA?= if [ \( -n "${DISABLE_SIZE}" -a -n "${NO_CHECKSUM}" \) -o ! -f "${MD5_FILE}" ]; then exit; fi; \ - DIR=${DIST_SUBDIR}; ${AWK} -v alg=$$alg -v file=$${DIR:+$$DIR/}$${file} \ - '$$1 == alg && $$2 == "(" file ")" {print $$4}' ${MD5_FILE} - -# Fetch - -.if !target(do-fetch) -do-fetch: - @${MKDIR} ${_DISTDIR} - @cd ${_DISTDIR};\ - ${_MASTER_SITES_ENV} ; \ - for _file in ${DISTFILES}; do \ - file=$${_file%%:*}; \ - if [ $$_file = $$file ]; then \ - select=''; \ - else \ - select=`${ECHO_CMD} $${_file##*:} | ${SED} -e 's/,/ /g'` ; \ - fi; \ - force_fetch=false; \ - filebasename=`${BASENAME} $$file`; \ - for afile in ${FORCE_FETCH}; do \ - afile=`${BASENAME} $$afile`; \ - if [ "x$$afile" = "x$$filebasename" ]; then \ - force_fetch=true; \ - fi; \ - done; \ - if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \ - if [ -L $$file -o -L $$filebasename ]; then \ - ${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \ - ${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \ - ${ECHO_MSG} "=> Please correct this problem and try again."; \ - exit 1; \ - fi; \ - if [ -f ${MD5_FILE} -a "x${NO_CHECKSUM}" = "x" ]; then \ - _md5sum=`alg=MD5; ${DISTINFO_DATA}`; \ - if [ -z "$$_md5sum" ]; then \ - ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is not in ${MD5_FILE}."; \ - ${ECHO_MSG} "=> Either ${MD5_FILE} is out of date, or"; \ - ${ECHO_MSG} "=> $${DIR:+$$DIR/}$$file is spelled incorrectly."; \ - exit 1; \ - fi; \ - fi; \ - ${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \ - if [ ! -w ${DISTDIR} ]; then \ - ${ECHO_MSG} "=> ${DISTDIR} is not writable by you; cannot fetch."; \ - exit 1; \ - fi; \ - if [ ! -z "$$select" ] ; then \ - __MASTER_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \ - eval ___MASTER_SITES_TMP="\$${_MASTER_SITES_$${group}}" ; \ - __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \ - fi; \ - done; \ - ___MASTER_SITES_TMP= ; \ - SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \ - fi; \ - for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ - ${ECHO_MSG} "=> Attempting to fetch from $${site}."; \ - CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ - case $${file} in \ - */*) ${MKDIR} $${file%/*}; \ - args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \ - continue 2; \ - fi; \ - done; \ - ${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\ - ${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \ - exit 1; \ - fi; \ - done -.if defined(PATCHFILES) - @cd ${_DISTDIR};\ - ${_PATCH_SITES_ENV} ; \ - for _file in ${PATCHFILES}; do \ - file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ - select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ - force_fetch=false; \ - filebasename=`${BASENAME} $$file`; \ - for afile in ${FORCE_FETCH}; do \ - afile=`${BASENAME} $$afile`; \ - if [ "x$$afile" = "x$$filebasename" ]; then \ - force_fetch=true; \ - fi; \ - done; \ - if [ ! -f $$file -a ! -f $$filebasename -o "$$force_fetch" = "true" ]; then \ - if [ -L $$file -o -L `${BASENAME} $$file` ]; then \ - ${ECHO_MSG} "=> ${_DISTDIR}/$$file is a broken symlink."; \ - ${ECHO_MSG} "=> Perhaps a filesystem (most likely a CD) isn't mounted?"; \ - ${ECHO_MSG} "=> Please correct this problem and try again."; \ - exit 1; \ - fi; \ - ${ECHO_MSG} "=> $$file doesn't seem to exist in ${_DISTDIR}."; \ - if [ ! -z "$$select" ] ; then \ - __PATCH_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \ - eval ___PATCH_SITES_TMP="\$${_PATCH_SITES_$${group}}" ; \ - __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \ - fi; \ - done; \ - ___PATCH_SITES_TMP= ; \ - SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \ - fi; \ - for site in `eval $$SORTED_PATCH_SITES_CMD_TMP`; do \ - ${ECHO_MSG} "=> Attempting to fetch from $${site}."; \ - CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ - case $${file} in \ - */*) ${MKDIR} $${file%/*}; \ - args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - if ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} ${FETCH_AFTER_ARGS}; then \ - continue 2; \ - fi; \ - done; \ - ${ECHO_MSG} "=> Couldn't fetch it - please try to retrieve this";\ - ${ECHO_MSG} "=> port manually into ${_DISTDIR} and try again."; \ - exit 1; \ - fi; \ - done -.endif -.endif - -# Extract - -.if !target(do-extract) -do-extract: - @${RM} -rf ${WRKDIR} - @${MKDIR} ${WRKDIR} - @for file in ${EXTRACT_ONLY}; do \ - if ! (cd ${WRKDIR} && ${EXTRACT_CMD} ${EXTRACT_BEFORE_ARGS} ${_DISTDIR}/$$file ${EXTRACT_AFTER_ARGS});\ - then \ - exit 1; \ - fi; \ - done -.if !defined(EXTRACT_PRESERVE_OWNERSHIP) - @if [ `${ID} -u` = 0 ]; then \ - ${CHMOD} -R ug-s ${WRKDIR}; \ - ${CHOWN} -R 0:0 ${WRKDIR}; \ - fi -.endif -.endif - -# Patch - -.if !target(patch-dos2unix) -patch-dos2unix: -.if defined(USE_DOS2UNIX) -.if ${USE_DOS2UNIX:U}=="YES" - @${ECHO_MSG} "===> Converting DOS text files to UNIX text files" - @${FIND} -E ${WRKSRC} -type f -iregex '${DOS2UNIX_REGEX}' -print0 | \ - ${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/
$$//' -.else - @${ECHO_MSG} "===> Converting DOS text file to UNIX text file: ${f}" -.if ${USE_DOS2UNIX:M*/*} -.for f in ${USE_DOS2UNIX} - @${REINPLACE_CMD} -i '' -e 's/
$$//' ${WRKSRC}/${f} -.endfor -.else -.for f in ${USE_DOS2UNIX} - @${FIND} ${WRKSRC} -type f -name '${f}' -print0 | \ - ${XARGS} -0 ${REINPLACE_CMD} -i '' -e 's/
$$//' -.endfor -.endif -.endif -.else - @${DO_NADA} -.endif -.endif - -.if !target(do-patch) -do-patch: -.if defined(PATCHFILES) - @${ECHO_MSG} "===> Applying distribution patches for ${PKGNAME}" - @(cd ${_DISTDIR}; \ - for i in ${_PATCHFILES}; do \ - if [ ${PATCH_DEBUG_TMP} = yes ]; then \ - ${ECHO_MSG} "===> Applying distribution patch $$i" ; \ - fi; \ - case $$i in \ - *.Z|*.gz) \ - ${GZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \ - ;; \ - *.bz2) \ - ${BZCAT} $$i | ${PATCH} ${PATCH_DIST_ARGS}; \ - ;; \ - *) \ - ${PATCH} ${PATCH_DIST_ARGS} < $$i; \ - ;; \ - esac; \ - done) -.endif -.if defined(EXTRA_PATCHES) - @for i in ${EXTRA_PATCHES}; do \ - ${ECHO_MSG} "===> Applying extra patch $$i"; \ - ${PATCH} ${PATCH_ARGS} < $$i; \ - done -.endif - @if [ -d ${PATCHDIR} ]; then \ - if [ "`${ECHO_CMD} ${PATCHDIR}/patch-*`" != "${PATCHDIR}/patch-*" ]; then \ - ${ECHO_MSG} "===> Applying ${OPSYS} patches for ${PKGNAME}" ; \ - PATCHES_APPLIED="" ; \ - for i in ${PATCHDIR}/patch-*; do \ - case $$i in \ - *.orig|*.rej|*~|*,v) \ - ${ECHO_MSG} "===> Ignoring patchfile $$i" ; \ - ;; \ - *) \ - if [ ${PATCH_DEBUG_TMP} = yes ]; then \ - ${ECHO_MSG} "===> Applying ${OPSYS} patch $$i" ; \ - fi; \ - if ${PATCH} ${PATCH_ARGS} < $$i ; then \ - PATCHES_APPLIED="$$PATCHES_APPLIED $$i" ; \ - else \ - ${ECHO_MSG} `${ECHO_CMD} "=> Patch $$i failed to apply cleanly." | ${SED} "s|${PATCHDIR}/||"` ; \ - if [ x"$$PATCHES_APPLIED" != x"" ]; then \ - ${ECHO_MSG} `${ECHO_CMD} "=> Patch(es) $$PATCHES_APPLIED applied cleanly." | ${SED} "s|${PATCHDIR}/||g"` ; \ - fi; \ - ${FALSE} ; \ - fi; \ - ;; \ - esac; \ - done; \ - fi; \ - fi -.endif - -.if !target(run-autotools) -run-autotools: - @${DO_NADA} -.endif - -# Configure - -.if !target(do-configure) -do-configure: - @if [ -f ${SCRIPTDIR}/configure ]; then \ - cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ - ${SCRIPTDIR}/configure; \ - fi -.if defined(GNU_CONFIGURE) - @CONFIG_GUESS_DIRS=$$(${FIND} ${WRKDIR} -name config.guess -o -name config.sub \ - | ${XARGS} -n 1 ${DIRNAME}); \ - for _D in $${CONFIG_GUESS_DIRS}; do \ - ${CP} -f ${TEMPLATES}/config.guess $${_D}/config.guess; \ - ${CHMOD} a+rx $${_D}/config.guess; \ - ${CP} -f ${TEMPLATES}/config.sub $${_D}/config.sub; \ - ${CHMOD} a+rx $${_D}/config.sub; \ - done -.endif -.if defined(HAS_CONFIGURE) - @(cd ${CONFIGURE_WRKSRC} && \ - ${SET_LATE_CONFIGURE_ARGS} \ - if ! ${SETENV} CC="${CC}" CXX="${CXX}" \ - CFLAGS="${CFLAGS}" CXXFLAGS="${CXXFLAGS}" \ - INSTALL="/usr/bin/install -c ${_BINOWNGRP}" \ - INSTALL_DATA="${INSTALL_DATA}" \ - INSTALL_PROGRAM="${INSTALL_PROGRAM}" \ - INSTALL_SCRIPT="${INSTALL_SCRIPT}" \ - ${CONFIGURE_ENV} ./${CONFIGURE_SCRIPT} ${CONFIGURE_ARGS}; then \ - ${ECHO_MSG} "===> Script \"${CONFIGURE_SCRIPT}\" failed unexpectedly."; \ - (${ECHO_CMD} ${CONFIGURE_FAIL_MESSAGE}) | ${FMT} 75 79 ; \ - ${FALSE}; \ - fi) -.endif -.if defined(USE_IMAKE) - @(cd ${CONFIGURE_WRKSRC}; ${SETENV} ${MAKE_ENV} ${XMKMF}) -.endif -.endif - -# Build - -.if !target(do-build) -do-build: -.for dir in ${BUILD_WRKSRC} -.if defined(USE_GMAKE) - @(cd ${dir}; ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET}) -.else - @(cd ${dir}; ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${ALL_TARGET}) -.endif -.endfor -.endif - -# Check conflicts - -.if !target(check-conflicts) -check-conflicts: -.if defined(CONFLICTS) && !defined(DISABLE_CONFLICTS) - @found=`${PKG_INFO} -I ${CONFLICTS:C/.+/'&'/} 2>/dev/null | ${AWK} '{print $$1}'`; \ - conflicts_with=; \ - for entry in $${found}; do \ - if ${PKG_INFO} -e $${entry} ; then \ - prfx=`${PKG_INFO} -q -p "$${entry}" 2> /dev/null | ${SED} -ne '1s/^@cwd //p'`; \ - orgn=`${PKG_INFO} -q -o "$${entry}" 2> /dev/null`; \ - if [ "/${PREFIX}" = "/$${prfx}" -a "/${PKGORIGIN}" != "/$${orgn}" ]; then \ - conflicts_with="$${conflicts_with} $${entry}"; \ - fi; \ - fi; \ - done; \ - if [ -n "$${conflicts_with}" ]; then \ - ${ECHO_MSG}; \ - ${ECHO_MSG} "===> ${PKGNAME} conflicts with installed package(s): "; \ - for entry in $${conflicts_with}; do \ - ${ECHO_MSG} " $${entry}"; \ - done; \ - ${ECHO_MSG}; \ - ${ECHO_MSG} " They install files into the same place."; \ - ${ECHO_MSG} " Please remove them first with pkg_delete(1)."; \ - exit 1; \ - fi -.endif # CONFLICTS -.endif - -# Install - -.if !target(do-install) -do-install: -.for dir in ${INSTALL_WRKSRC} -.if defined(USE_GMAKE) - @(cd ${dir} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET}) -.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) - @(cd ${dir} && ${SETENV} ${MAKE_ENV} ${GMAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man) -.endif -.else # !defined(USE_GMAKE) - @(cd ${dir} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} ${INSTALL_TARGET}) -.if defined(USE_IMAKE) && !defined(NO_INSTALL_MANPAGES) - @(cd ${dir} && ${SETENV} ${MAKE_ENV} ${MAKE} ${MAKE_FLAGS} ${MAKEFILE} ${MAKE_ARGS} install.man) -.endif -.endif -.endfor -.endif - -# Package - -.if !target(do-package) -do-package: ${TMPPLIST} - @if [ -d ${PACKAGES} ]; then \ - if [ ! -d ${PKGREPOSITORY} ]; then \ - if ! ${MKDIR} ${PKGREPOSITORY}; then \ - ${ECHO_MSG} "=> Can't create directory ${PKGREPOSITORY}."; \ - exit 1; \ - fi; \ - fi; \ - fi - @__softMAKEFLAGS='${__softMAKEFLAGS:S/'/'\''/g}'; \ - _LATE_PKG_ARGS=""; \ - if [ -f ${PKGINSTALL} ]; then \ - _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -i ${PKGINSTALL}"; \ - fi; \ - if [ -f ${PKGDEINSTALL} ]; then \ - _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -k ${PKGDEINSTALL}"; \ - fi; \ - if [ -f ${PKGREQ} ]; then \ - _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -r ${PKGREQ}"; \ - fi; \ - if [ -f ${PKGMESSAGE} ]; then \ - _LATE_PKG_ARGS="$${_LATE_PKG_ARGS} -D ${PKGMESSAGE}"; \ - fi; \ - if ${PKG_CMD} ${PKG_ARGS} ${PKGFILE}; then \ - if [ -d ${PACKAGES} ]; then \ - cd ${.CURDIR} && eval ${MAKE} $${__softMAKEFLAGS} package-links; \ - fi; \ - else \ - cd ${.CURDIR} && eval ${MAKE} $${__softMAKEFLAGS} delete-package; \ - exit 1; \ - fi -.endif - -# Some support rules for do-package - -.if !target(package-links) -package-links: delete-package-links - @for cat in ${CATEGORIES}; do \ - if [ ! -d ${PACKAGES}/$$cat ]; then \ - if ! ${MKDIR} ${PACKAGES}/$$cat; then \ - ${ECHO_MSG} "=> Can't create directory ${PACKAGES}/$$cat."; \ - exit 1; \ - fi; \ - fi; \ - ${LN} -sf `${ECHO_CMD} $$cat | ${SED} -e 'sa[^/]*a..ag'`/${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PACKAGES}/$$cat; \ - done -.if !defined(NO_LATEST_LINK) - @if [ ! -d ${PKGLATESTREPOSITORY} ]; then \ - if ! ${MKDIR} ${PKGLATESTREPOSITORY}; then \ - ${ECHO_MSG} "=> Can't create directory ${PKGLATESTREPOSITORY}."; \ - exit 1; \ - fi; \ - fi - @${LN} -s ../${PKGREPOSITORYSUBDIR}/${PKGNAME}${PKG_SUFX} ${PKGLATESTFILE} -.endif -.endif - -.if !target(delete-package-links) -delete-package-links: - @for cat in ${CATEGORIES}; do \ - ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \ - done -.if !defined(NO_LATEST_LINK) - @${RM} -f ${PKGLATESTFILE} -.endif -.endif - -.if !target(delete-package) -delete-package: delete-package-links - @${RM} -f ${PKGFILE} -.endif - -.if !target(delete-package-links-list) -delete-package-links-list: - @for cat in ${CATEGORIES}; do \ - ${ECHO_CMD} ${RM} -f ${PACKAGES}/$$cat/${PKGNAME}${PKG_SUFX}; \ - done -.if !defined(NO_LATEST_LINK) - @${ECHO_CMD} ${RM} -f ${PKGLATESTFILE} -.endif -.endif - -.if !target(delete-package-list) -delete-package-list: delete-package-links-list - @${ECHO_CMD} "[ -f ${PKGFILE} ] && (${ECHO_CMD} deleting ${PKGFILE}; ${RM} -f ${PKGFILE})" -.endif - -# Utility targets follow - -.if !target(check-already-installed) -check-already-installed: -.if !defined(NO_PKG_REGISTER) && !defined(FORCE_PKG_REGISTER) - @${ECHO_MSG} "===> Checking if ${PKGORIGIN} already installed"; \ - ${MKDIR} ${PKG_DBDIR}; \ - already_installed=`${PKG_INFO} -q -O ${PKGORIGIN}`; \ - if [ -n "$${already_installed}" ]; then \ - for p in $${already_installed}; do \ - prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \ - if [ "x${PREFIX}" = "x$${prfx}" ]; then \ - df=`${PKG_INFO} -q -f $${p} 2> /dev/null | ${GREP} -v "^@" | ${COMM} -12 - ${TMPPLIST}`; \ - if [ -n "$${df}" ]; then \ - found_package=$${p}; \ - break; \ - fi; \ - fi; \ - done; \ - fi; \ - if [ -d ${PKG_DBDIR}/${PKGNAME} -o -n "$${found_package}" ]; then \ - if [ -d ${PKG_DBDIR}/${PKGNAME} ]; then \ - ${ECHO_CMD} "===> ${PKGNAME} is already installed"; \ - else \ - ${ECHO_CMD} "===> An older version of ${PKGORIGIN} is already installed ($${found_package})"; \ - fi; \ - ${ECHO_MSG} " You may wish to \`\`make deinstall'' and install this port again"; \ - ${ECHO_MSG} " by \`\`make reinstall'' to upgrade it properly."; \ - ${ECHO_MSG} " If you really wish to overwrite the old port of ${PKGORIGIN}"; \ - ${ECHO_MSG} " without deleting it first, set the variable \"FORCE_PKG_REGISTER\""; \ - ${ECHO_MSG} " in your environment or the \"make install\" command line."; \ - exit 1; \ - fi -.else - @${DO_NADA} -.endif -.endif - -.if !target(check-umask) -check-umask: - @if [ `${SH} -c umask` != 0022 ]; then \ - ${ECHO_MSG} "===> Warning: your umask is \"`${SH} -c umask`"\".; \ - ${ECHO_MSG} " If this is not desired, set it to an appropriate value"; \ - ${ECHO_MSG} " and install this port again by \`\`make reinstall''."; \ - fi -.endif - -.if !target(install-mtree) -install-mtree: - @${MKDIR} ${PREFIX} - @if [ `${ID} -u` != 0 ]; then \ - if [ -w ${PREFIX}/ ]; then \ - ${ECHO_MSG} "Warning: not superuser, you may get some errors during installation."; \ - else \ - ${ECHO_MSG} "Error: ${PREFIX}/ not writable."; \ - ${FALSE}; \ - fi; \ - fi -.if !defined(NO_MTREE) - @if [ `${ID} -u` = 0 ]; then \ - if [ ! -f ${MTREE_FILE} ]; then \ - ${ECHO_MSG} "Error: mtree file \"${MTREE_FILE}\" is missing."; \ - ${ECHO_MSG} "Copy it from a suitable location (e.g., /usr/src/etc/mtree) and try again."; \ - exit 1; \ - else \ - ${MTREE_CMD} ${MTREE_ARGS} ${PREFIX}/ >/dev/null; \ - if [ ${PREFIX} = ${LOCALBASE} ]; then \ - cd ${PREFIX}/share/nls; \ - ${LN} -shf C POSIX; \ - ${LN} -shf C en_US.US-ASCII; \ - fi; \ - fi; \ - else \ - ${ECHO_MSG} "Warning: not superuser, can't run mtree."; \ - ${ECHO_MSG} "You may want to become root and try again to ensure correct permissions."; \ - fi -.endif -.endif - -.if !target(install-ldconfig-file) -install-ldconfig-file: -.if defined(USE_LDCONFIG) || defined(USE_LDCONFIG32) || defined(INSTALLS_SHLIB) -.if defined(USE_LDCONFIG) -.if !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Running ldconfig" - ${LDCONFIG} -m ${USE_LDCONFIG} -.else - @${ECHO_MSG} "===> Running ldconfig (errors are ignored)" - -${LDCONFIG} -m ${USE_LDCONFIG} -.endif -.if ${USE_LDCONFIG} != "${PREFIX}/lib" - @${ECHO_MSG} "===> Installing ldconfig configuration file" -.if defined(NO_LDCONFIG_MTREE) - @${MKDIR} ${PREFIX}/${LDCONFIG_DIR} -.endif - @${ECHO_CMD} ${USE_LDCONFIG} | ${TR} ' ' '\n' \ - > ${PREFIX}/${LDCONFIG_DIR}/${UNIQUENAME} - @${ECHO_CMD} "@cwd" >> ${TMPPLIST} - @${ECHO_CMD} ${LDCONFIG_DIR}/${UNIQUENAME} >> ${TMPPLIST} -.if defined(NO_LDCONFIG_MTREE) - @${ECHO_CMD} "@unexec rmdir ${LDCONFIG_DIR} >/dev/null 2>&1 || true" >> ${TMPPLIST} -.endif -.endif -.endif -.if defined(USE_LDCONFIG32) -.if !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Running ldconfig" - ${LDCONFIG} -32 -m ${USE_LDCONFIG32} -.else - @${ECHO_MSG} "===> Running ldconfig (errors are ignored)" - -${LDCONFIG} -32 -m ${USE_LDCONFIG32} -.endif - @${ECHO_MSG} "===> Installing 32-bit ldconfig configuration file" -.if defined(NO_LDCONFIG_MTREE) - @${MKDIR} ${PREFIX}/${LDCONFIG_32DIR} -.endif - @${ECHO_CMD} ${USE_LDCONFIG32} | ${TR} ' ' '\n' \ - > ${PREFIX}/${LDCONFIG32_DIR}/${UNIQUENAME} - @${ECHO_CMD} "@cwd" >> ${TMPPLIST} - @${ECHO_CMD} ${LDCONFIG32_DIR}/${UNIQUENAME} >> ${TMPPLIST} -.if defined(NO_LDCONFIG_MTREE) - @${ECHO_CMD} "@unexec rmdir ${LDCONFIG32_DIR} >/dev/null 2>&1" >> ${TMPPLIST} -.endif -.endif -# This can be removed once all ports have been converted to USE_LDCONFIG. -.if defined(INSTALLS_SHLIB) -.if defined(USE_LDCONFIG) - @${ECHO_MSG} "===> INSTALLS_SHLIB and USE_LDCONFIG both defined." -.endif -.if defined(USE_LDCONFIG32) - @${ECHO_MSG} "===> INSTALLS_SHLIB and USE_LDCONFIG32 both defined." -.endif -.if !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Running ldconfig" - ${LDCONFIG_CMD} -.else - @${ECHO_MSG} "===> Running ldconfig (errors are ignored)" - -${LDCONFIG_CMD} -.endif -.endif -.else - @${DO_NADA} -.endif -.endif - -.if !target(security-check) -.if !defined(OLD_SECURITY_CHECK) - -security-check: -# Scan PLIST for: -# 1. setugid files -# 2. accept()/recvfrom() which indicates network listening capability -# 3. insecure functions (gets/mktemp/tempnam/[XXX]) -# 4. startup scripts, in conjunction with 2. -# 5. world-writable files/dirs -# - -@${RM} -f ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable ${WRKDIR}/.PLIST.objdump; \ - ${AWK} -v prefix='${PREFIX}' ' \ - match($$0, /^@cwd /) { prefix = substr($$0, RSTART + RLENGTH); if (prefix == "/") prefix=""; next; } \ - /^@/ { next; } \ - /^\// { print; next; } \ - { print prefix "/" $$0; } \ - ' ${TMPPLIST} > ${WRKDIR}/.PLIST.flattened; \ - ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \ - | ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) 2> /dev/null > ${WRKDIR}/.PLIST.setuid; \ - ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \ - | ${XARGS} -0 -J % ${FIND} % -prune -perm -0002 \! -type l 2> /dev/null > ${WRKDIR}/.PLIST.writable; \ - ${TR} '\n' '\0' < ${WRKDIR}/.PLIST.flattened \ - | ${XARGS} -0 -J % ${FIND} % -prune ! -type l -type f -print0 2> /dev/null \ - | ${XARGS} -0 -n 1 ${OBJDUMP} -R 2> /dev/null > ${WRKDIR}/.PLIST.objdump; \ - if \ - ! ${AWK} -v audit="$${PORTS_AUDIT}" -f ${PORTSDIR}/Tools/scripts/security-check.awk \ - ${WRKDIR}/.PLIST.flattened ${WRKDIR}/.PLIST.objdump ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.writable; \ - then \ - www_site=$$(cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} www-site); \ - if [ ! -z "$${www_site}" ]; then \ - ${ECHO_MSG}; \ - ${ECHO_MSG} " For more information, and contact details about the security"; \ - ${ECHO_MSG} " status of this software, see the following webpage: "; \ - ${ECHO_MSG} "$${www_site}"; \ - fi; \ - fi - - -.else # i.e. defined(OLD_SECURITY_CHECK) - -security-check: -# Scan PLIST for: -# 1. setugid files -# 2. accept()/recvfrom() which indicates network listening capability -# 3. insecure functions (gets/mktemp/tempnam/[XXX]) -# 4. startup scripts, in conjunction with 2. -# 5. world-writable files/dirs -# - -@${RM} -f ${WRKDIR}/.PLIST.setuid ${WRKDIR}/.PLIST.stupid \ - ${WRKDIR}/.PLIST.network ${WRKDIR}/.PLIST.writable; \ - if [ -n "$$PORTS_AUDIT" ]; then \ - stupid_functions_regexp=' (gets|mktemp|tempnam|tmpnam|strcpy|strcat|sprintf)$$'; \ - else \ - stupid_functions_regexp=' (gets|mktemp|tempnam|tmpnam)$$'; \ - fi; \ - for i in `${GREP} -v '^@' ${TMPPLIST}`; do \ - if [ ! -L "${PREFIX}/$$i" -a -f "${PREFIX}/$$i" ]; then \ - ${OBJDUMP} -R ${PREFIX}/$$i > \ - ${WRKDIR}/.PLIST.objdump 2> /dev/null; \ - if [ -s ${WRKDIR}/.PLIST.objdump ] ; then \ - ${EGREP} " $$stupid_functions_regexp" \ - ${WRKDIR}/.PLIST.objdump | ${AWK} '{print " " $$3}' | ${TR} -d '\n' \ - > ${WRKDIR}/.PLIST.stupid; \ - if [ -n "`${EGREP} ' (accept|recvfrom)$$' ${WRKDIR}/.PLIST.objdump`" ] ; then \ - if [ -s ${WRKDIR}/.PLIST.stupid ]; then \ - ${ECHO_CMD} -n "${PREFIX}/$$i (USES POSSIBLY INSECURE FUNCTIONS:" >> ${WRKDIR}/.PLIST.network; \ - ${CAT} ${WRKDIR}/.PLIST.stupid >> ${WRKDIR}/.PLIST.network; \ - ${ECHO_CMD} ")" >> ${WRKDIR}/.PLIST.network; \ - else \ - ${ECHO_CMD} ${PREFIX}/$$i >> ${WRKDIR}/.PLIST.network; \ - fi; \ - fi; \ - fi; \ - if [ -n "`${FIND} ${PREFIX}/$$i -prune \( -perm -4000 -o -perm -2000 \) \( -perm -0010 -o -perm -0001 \) 2>/dev/null`" ]; then \ - if [ -s ${WRKDIR}/.PLIST.stupid ]; then \ - ${ECHO_CMD} -n "${PREFIX}/$$i (USES POSSIBLY INSECURE FUNCTIONS:" >> ${WRKDIR}/.PLIST.setuid; \ - ${CAT} ${WRKDIR}/.PLIST.stupid >> ${WRKDIR}/.PLIST.setuid; \ - ${ECHO_CMD} ")" >> ${WRKDIR}/.PLIST.setuid; \ - else \ - ${ECHO_CMD} ${PREFIX}/$$i >> ${WRKDIR}/.PLIST.setuid; \ - fi; \ - fi; \ - fi; \ - if [ ! -L "${PREFIX}/$$i" ]; then \ - if [ -n "`${FIND} ${PREFIX}/$$i -prune -perm -0002 \! -type l 2>/dev/null`" ]; then \ - ${ECHO_CMD} ${PREFIX}/$$i >> ${WRKDIR}/.PLIST.writable; \ - fi; \ - fi; \ - done; \ - ${GREP} '^etc/rc.d/' ${TMPPLIST} > ${WRKDIR}/.PLIST.startup; \ - if [ -s ${WRKDIR}/.PLIST.setuid -o -s ${WRKDIR}/.PLIST.network -o -s ${WRKDIR}/.PLIST.writable ]; then \ - if [ -n "$$PORTS_AUDIT" ]; then \ - ${ECHO_MSG} "===> SECURITY REPORT (PARANOID MODE): "; \ - else \ - ${ECHO_MSG} "===> SECURITY REPORT: "; \ - fi; \ - if [ -s ${WRKDIR}/.PLIST.setuid ] ; then \ - ${ECHO_MSG} " This port has installed the following binaries,"; \ - ${ECHO_MSG} " which execute with increased privileges."; \ - ${CAT} ${WRKDIR}/.PLIST.setuid; \ - ${ECHO_MSG}; \ - fi; \ - if [ -s ${WRKDIR}/.PLIST.network ] ; then \ - ${ECHO_MSG} " This port has installed the following files, which may act as network"; \ - ${ECHO_MSG} " servers and may therefore pose a remote security risk to the system."; \ - ${CAT} ${WRKDIR}/.PLIST.network; \ - ${ECHO_MSG}; \ - if [ -s ${WRKDIR}/.PLIST.startup ] ; then \ - ${ECHO_MSG} " This port has installed the following startup scripts,"; \ - ${ECHO_MSG} " which may cause these network services to be started at boot time."; \ - ${SED} s,^,${PREFIX}/, < ${WRKDIR}/.PLIST.startup; \ - ${ECHO_MSG}; \ - fi; \ - fi; \ - if [ -s ${WRKDIR}/.PLIST.writable ] ; then \ - ${ECHO_MSG} " This port has installed the following world-writable files/directories."; \ - ${CAT} ${WRKDIR}/.PLIST.writable; \ - ${ECHO_MSG}; \ - fi; \ - ${ECHO_MSG} " If there are vulnerabilities in these programs there may be a security"; \ - ${ECHO_MSG} " risk to the system. The FreeBSD Project makes no guarantee about the"; \ - ${ECHO_MSG} " security of ports included in the Ports Collection."; \ - ${ECHO_MSG} " Please type 'make deinstall' to deinstall the port if this is a concern."; \ - www_site=$$(cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} www-site); \ - if [ ! -z "$${www_site}" ]; then \ - ${ECHO_MSG}; \ - ${ECHO_MSG} " For more information, and contact details about the security"; \ - ${ECHO_MSG} " status of this software, see the following webpage: "; \ - ${ECHO_MSG} "$${www_site}"; \ - fi; \ - fi -.endif # !defined(OLD_SECURITY_CHECK) -.endif - -################################################################ -# Skeleton targets start here -# -# You shouldn't have to change these. Either add the pre-* or -# post-* targets/scripts or redefine the do-* targets. These -# targets don't do anything other than checking for cookies and -# call the necessary targets/scripts. -################################################################ - -# Please note that the order of the following targets is important, and -# should not be modified. - -.if defined(CHROOTED) -_CHROOT_SEQ= post-chroot -.else -_CHROOT_SEQ= -.endif -_SANITY_SEQ= ${_CHROOT_SEQ} pre-everything check-makefile check-categories \ - check-makevars check-desktop-entries check-depends \ - check-deprecated check-vulnerable buildanyway-message \ - options-message -_FETCH_DEP= check-sanity -_FETCH_SEQ= fetch-depends pre-fetch pre-fetch-script \ - do-fetch post-fetch post-fetch-script -_EXTRACT_DEP= fetch -_EXTRACT_SEQ= extract-message checksum extract-depends pre-extract \ - pre-extract-script do-extract \ - post-extract post-extract-script -_PATCH_DEP= extract -_PATCH_SEQ= patch-message patch-depends patch-dos2unix pre-patch \ - pre-patch-script do-patch post-patch post-patch-script -_CONFIGURE_DEP= patch -_CONFIGURE_SEQ= build-depends lib-depends configure-message \ - pre-configure pre-configure-script \ - run-autotools do-configure post-configure post-configure-script -_BUILD_DEP= configure -_BUILD_SEQ= build-message pre-build pre-build-script do-build \ - post-build post-build-script -_INSTALL_DEP= build -_INSTALL_SEQ= install-message check-conflicts \ - run-depends lib-depends apply-slist pre-install \ - pre-install-script generate-plist check-already-installed -_INSTALL_SUSEQ= check-umask install-mtree pre-su-install \ - pre-su-install-script do-install install-desktop-entries \ - post-install post-install-script add-plist-info \ - add-plist-docs add-plist-examples add-plist-data \ - add-plist-post install-rc-script compress-man \ - install-ldconfig-file fake-pkg security-check -_PACKAGE_DEP= install -_PACKAGE_SEQ= package-message pre-package pre-package-script \ - do-package post-package-script - -.if !target(post-chroot) -post-chroot: - @${DO_NADA} -.endif - -.if !target(check-sanity) -check-sanity: ${_SANITY_SEQ} -.endif - -# XXX MCL might need to move in loop below? -.if !target(fetch) -fetch: ${_FETCH_DEP} ${_FETCH_SEQ} -.endif - -# Main logic. The loop generates 6 main targets and using cookies -# ensures that those already completed are skipped. - -.for target in extract patch configure build install package - -.if !target(${target}) && defined(_OPTIONS_OK) -${target}: ${${target:U}_COOKIE} -.elif !target(${target}) -${target}: config-conditional - @cd ${.CURDIR} && ${MAKE} CONFIG_DONE=1 ${__softMAKEFLAGS} ${${target:U}_COOKIE} -.elif target(${target}) && defined(IGNORE) -.endif - -.if !exists(${${target:U}_COOKIE}) - -.if ${UID} != 0 && defined(_${target:U}_SUSEQ) && !defined(INSTALL_AS_USER) -.if defined(USE_SUBMAKE) -${${target:U}_COOKIE}: ${_${target:U}_DEP} - @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${_${target:U}_SEQ} -.else -${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ} -.endif - @${ECHO_MSG} "===> Switching to root credentials for '${target}' target" - @cd ${.CURDIR} && \ - ${SU_CMD} "${MAKE} ${__softMAKEFLAGS} ${_${target:U}_SUSEQ}" - @${ECHO_MSG} "===> Returning to user credentials" - @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} -.elif defined(USE_SUBMAKE) -${${target:U}_COOKIE}: ${_${target:U}_DEP} - @cd ${.CURDIR} && \ - ${MAKE} ${__softMAKEFLAGS} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ} - @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} -.else -${${target:U}_COOKIE}: ${_${target:U}_DEP} ${_${target:U}_SEQ} ${_${target:U}_SUSEQ} - @${TOUCH} ${TOUCH_FLAGS} ${.TARGET} -.endif - -.else -${${target:U}_COOKIE}:: - @if [ -e ${.TARGET} ]; then \ - ${DO_NADA}; \ - else \ - cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${.TARGET}; \ - fi -.endif - -.endfor - -# Enforce order for -jN builds - -.ORDER: ${_SANITY_SEQ} -.ORDER: ${_FETCH_DEP} ${_FETCH_SEQ} -.ORDER: ${_EXTRACT_DEP} ${_EXTRACT_SEQ} -.ORDER: ${_PATCH_DEP} ${_PATCH_SEQ} -.ORDER: ${_CONFIGURE_DEP} ${_CONFIGURE_SEQ} -.ORDER: ${_BUILD_DEP} ${_BUILD_SEQ} -.ORDER: ${_INSTALL_DEP} ${_INSTALL_SEQ} -.ORDER: ${_PACKAGE_DEP} ${_PACKAGE_SEQ} - -extract-message: - @${ECHO_MSG} "===> Extracting for ${PKGNAME}" -patch-message: - @${ECHO_MSG} "===> Patching for ${PKGNAME}" -configure-message: - @${ECHO_MSG} "===> Configuring for ${PKGNAME}" -build-message: - @${ECHO_MSG} "===> Building for ${PKGNAME}" -install-message: - @${ECHO_MSG} "===> Installing for ${PKGNAME}" -package-message: - @${ECHO_MSG} "===> Building package for ${PKGNAME}" - -# Empty pre-* and post-* targets - -.for stage in pre post -.for name in check-sanity fetch extract patch configure build install package - -.if !target(${stage}-${name}) -${stage}-${name}: - @${DO_NADA} -.endif - -.if !target(${stage}-${name}-script) -${stage}-${name}-script: - @if [ -f ${SCRIPTDIR}/${.TARGET:S/-script$//} ]; then \ - cd ${.CURDIR} && ${SETENV} ${SCRIPTS_ENV} ${SH} \ - ${SCRIPTDIR}/${.TARGET:S/-script$//}; \ - fi -.endif - -.endfor -.endfor - -# Special cases for su -.if !target(pre-su-install) -pre-su-install: - @${DO_NADA} -.endif - -.if !target(pre-su-install-script) -pre-su-install-script: - @${DO_NADA} -.endif - - -.if !target(pretty-print-www-site) -pretty-print-www-site: - @www_site=$$(cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} www-site); \ - if [ -n "$${www_site}" ]; then \ - ${ECHO_MSG} -n " and/or visit the "; \ - ${ECHO_MSG} -n "<a href=\"$${www_site}\">web site</a>"; \ - ${ECHO_MSG} " for futher informations"; \ - fi -.endif - -################################################################ -# Some more targets supplied for users' convenience -################################################################ - -# Checkpatch -# -# Special target to verify patches - -.if !target(checkpatch) -checkpatch: - @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} PATCH_CHECK_ONLY=yes ${_PATCH_DEP} ${_PATCH_SEQ} -.endif - -# Reinstall -# -# Special target to re-run install - -.if !target(reinstall) -reinstall: - @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} - @cd ${.CURDIR} && DEPENDS_TARGET="${DEPENDS_TARGET}" ${MAKE} install -.endif - -# Deinstall -# -# Special target to remove installation - -.if !target(deinstall) -deinstall: -.if ${UID} != 0 && !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target" - @cd ${.CURDIR} && \ - ${SU_CMD} "${MAKE} ${__softMAKEFLAGS} ${.TARGET}" - @${ECHO_MSG} "===> Returning to user credentials" -.else - @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}" - @found_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \ - for p in $${found_names}; do \ - check_name=`${ECHO_CMD} $${p} | ${SED} -e 's/-[^-]*$$//'`; \ - if [ "$${check_name}" = "${PKGBASE}" ]; then \ - prfx=`${PKG_INFO} -q -p $${p} 2> /dev/null | ${SED} -ne '1s|^@cwd ||p'`; \ - if [ "x${PREFIX}" = "x$${prfx}" ]; then \ - ${ECHO_MSG} "===> Deinstalling $${p}"; \ - ${PKG_DELETE} -f $${p}; \ - else \ - ${ECHO_MSG} "===> $${p} has a different PREFIX: $${prfx}, skipping"; \ - fi; \ - fi; \ - done; \ - if [ -z "$${found_names}" ]; then \ - ${ECHO_MSG} "===> ${PKGBASE} not installed, skipping"; \ - fi - @${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} -.endif -.endif - -# Deinstall-all -# -# Special target to remove installation of all ports of the same origin - -.if !target(deinstall-all) -deinstall-all: -.if ${UID} != 0 && !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Switching to root credentials for '${.TARGET}' target" - @cd ${.CURDIR} && \ - ${SU_CMD} "${MAKE} ${__softMAKEFLAGS} ${.TARGET}" - @${ECHO_MSG} "===> Returning to user credentials" -.else - @${ECHO_MSG} "===> Deinstalling for ${PKGORIGIN}" - @deinstall_names=`${PKG_INFO} -q -O ${PKGORIGIN}`; \ - for oldpkgorigin in $$(${GREP} "|${PKGORIGIN}|" ${PORTSDIR}/MOVED | ${CUT} -f 1 -d '|' | ${SORT} -u); do \ - deinstall_names="$${deinstall_names} $$(${PKG_INFO} -q -O $${oldpkgorigin})"; \ - done; \ - if [ -n "$${deinstall_names}" ]; then \ - for d in $${deinstall_names}; do \ - ${ECHO_MSG} "===> Deinstalling $${d}"; \ - ${PKG_DELETE} -f $${d}; \ - done; \ - else \ - ${ECHO_MSG} "===> ${PKGORIGIN} not installed, skipping"; \ - fi; \ - ${RM} -f ${INSTALL_COOKIE} ${PACKAGE_COOKIE} -.endif -.endif - -# Cleaning up - -.if !target(do-clean) -do-clean: - @if [ -d ${WRKDIR} ]; then \ - if [ -w ${WRKDIR} ]; then \ - ${RM} -rf ${WRKDIR}; \ - else \ - ${ECHO_MSG} "===> ${WRKDIR} not writable, skipping"; \ - fi; \ - fi -.endif - -.if !target(clean) -clean: -.if !defined(NOCLEANDEPENDS) - @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} limited-clean-depends -.endif - @${ECHO_MSG} "===> Cleaning for ${PKGNAME}" -.if target(pre-clean) - @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} pre-clean -.endif - @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} do-clean -.if target(post-clean) - @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} post-clean -.endif -.endif - -.if !target(pre-distclean) -pre-distclean: - @${DO_NADA} -.endif - -.if !target(distclean) -distclean: pre-distclean clean - @cd ${.CURDIR} && ${MAKE} delete-distfiles RESTRICTED_FILES="${_DISTFILES} ${_PATCHFILES}" -.endif - -.if !target(delete-distfiles) -delete-distfiles: - @${ECHO_MSG} "===> Deleting distfiles for ${PKGNAME}" - @(if [ "X${RESTRICTED_FILES}" != "X" -a -d ${_DISTDIR} ]; then \ - cd ${_DISTDIR}; \ - for file in ${RESTRICTED_FILES}; do \ - ${RM} -f $${file}; \ - dir=$${file%/*}; \ - if [ "$${dir}" != "$${file}" ]; then \ - ${RMDIR} -p $${dir} >/dev/null 2>&1 || :; \ - fi; \ - done; \ - fi) -.if defined(DIST_SUBDIR) - -@${RMDIR} ${_DISTDIR} >/dev/null 2>&1 || ${TRUE} -.endif -.endif - -.if !target(delete-distfiles-list) -delete-distfiles-list: - @${ECHO_CMD} "# ${PKGNAME}" - @if [ "X${RESTRICTED_FILES}" != "X" ]; then \ - for file in ${RESTRICTED_FILES}; do \ - ${ECHO_CMD} "[ -f ${_DISTDIR}/$$file ] && (${ECHO_CMD} deleting ${_DISTDIR}/$$file; ${RM} -f ${_DISTDIR}/$$file)"; \ - dir=$${file%/*}; \ - if [ "$${dir}" != "$${file}" ]; then \ - ${ECHO_CMD} "(cd ${_DISTDIR} && ${RMDIR} -p $${dir} 2>/dev/null)"; \ - fi; \ - done; \ - fi -.if defined(DIST_SUBDIR) - @${ECHO_CMD} "${RMDIR} ${_DISTDIR} 2>/dev/null || ${TRUE}" -.endif -.endif - -# Prints out a list of files to fetch (useful to do a batch fetch) - -.if !target(fetch-list) -fetch-list: - @${MKDIR} ${_DISTDIR} - @(cd ${_DISTDIR}; \ - ${_MASTER_SITES_ENV} ; \ - for _file in ${DISTFILES}; do \ - file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ - select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ - if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ - if [ ! -z "$$select" ] ; then \ - __MASTER_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \ - eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \ - __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \ - fi; \ - done; \ - ___MASTER_SITES_TMP= ; \ - SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \ - fi; \ - for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ - if [ ! -z "`${ECHO_CMD} ${NOFETCHFILES} | ${GREP} -w $${file}`" ]; then \ - if [ -z "`${ECHO_CMD} ${MASTER_SITE_OVERRIDE} | ${GREP} -w $${site}`" ]; then \ - continue; \ - fi; \ - fi; \ - DIR=${DIST_SUBDIR};\ - CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ - case $${file} in \ - */*) args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - ${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \ - done; \ - ${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \ - fi; \ - done) -.if defined(PATCHFILES) - @(cd ${_DISTDIR}; \ - ${_PATCH_SITES_ENV} ; \ - for _file in ${PATCHFILES}; do \ - file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ - select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ - if [ ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ - if [ ! -z "$$select" ] ; then \ - __PATCH_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \ - eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \ - __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \ - fi; \ - done; \ - ___PATCH_SITES_TMP= ; \ - SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \ - fi; \ - for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ - CKSIZE=`alg=SIZE; ${DISTINFO_DATA}`; \ - case $${file} in \ - */*) args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - ${ECHO_CMD} -n ${SETENV} ${FETCH_ENV} ${FETCH_CMD} ${FETCH_BEFORE_ARGS} $${args} "${FETCH_AFTER_ARGS}" '|| ' ; \ - done; \ - ${ECHO_CMD} "${ECHO_CMD} $${file} not fetched" ; \ - fi; \ - done) -.endif -.endif - -.if !target(fetch-url-list-int) -fetch-url-list-int: - @${MKDIR} ${_DISTDIR} - @(cd ${_DISTDIR}; \ - ${_MASTER_SITES_ENV}; \ - for _file in ${DISTFILES}; do \ - file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ - select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ - if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ - if [ ! -z "$$select" ] ; then \ - __MASTER_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_MASTER_SITES_$${group}} ] ; then \ - eval ___MASTER_SITES_TMP=\$${_MASTER_SITES_$${group}} ; \ - __MASTER_SITES_TMP="$${__MASTER_SITES_TMP} $${___MASTER_SITES_TMP}" ; \ - fi \ - done; \ - ___MASTER_SITES_TMP= ; \ - SORTED_MASTER_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__MASTER_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_MASTER_SITES_CMD_TMP="${SORTED_MASTER_SITES_DEFAULT_CMD}" ; \ - fi ; \ - for site in `eval $$SORTED_MASTER_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ - DIR=${DIST_SUBDIR}; \ - CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \ - case $${file} in \ - */*) args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - ${ECHO_CMD} $${args} ; \ - done; \ - fi \ - done) -.if defined(PATCHFILES) - @(cd ${_DISTDIR}; \ - ${_PATCH_SITES_ENV} ; \ - for _file in ${PATCHFILES}; do \ - file=`${ECHO_CMD} $$_file | ${SED} -E -e 's/:[^:]+$$//'` ; \ - select=`${ECHO_CMD} $${_file#$${file}} | ${SED} -e 's/^://' -e 's/,/ /g'` ; \ - if [ ! -z "${LISTALL}" -o ! -f $$file -a ! -f `${BASENAME} $$file` ]; then \ - if [ ! -z "$$select" ] ; then \ - __PATCH_SITES_TMP= ; \ - for group in $$select; do \ - if [ ! -z \$${_PATCH_SITES_$${group}} ] ; then \ - eval ___PATCH_SITES_TMP=\$${_PATCH_SITES_$${group}} ; \ - __PATCH_SITES_TMP="$${__PATCH_SITES_TMP} $${___PATCH_SITES_TMP}" ; \ - fi \ - done; \ - ___PATCH_SITES_TMP= ; \ - SORTED_PATCH_SITES_CMD_TMP="${ECHO_CMD} ${_MASTER_SITE_OVERRIDE} `${ECHO_CMD} $${__PATCH_SITES_TMP} | ${AWK} '${MASTER_SORT_AWK:S|\\|\\\\|g}'` ${_MASTER_SITE_BACKUP}" ; \ - else \ - SORTED_PATCH_SITES_CMD_TMP="${SORTED_PATCH_SITES_DEFAULT_CMD}" ; \ - fi ; \ - for site in `eval $$SORTED_PATCH_SITES_CMD_TMP ${_RANDOMIZE_SITES}`; do \ - DIR=${DIST_SUBDIR}; \ - CKSIZE=`${GREP} "^SIZE ($${DIR:+$$DIR/}$$file)" ${MD5_FILE} | ${AWK} '{print $$4}'`; \ - case $${file} in \ - */*) args="-o $${file} $${site}$${file}";; \ - *) args=$${site}$${file};; \ - esac; \ - ${ECHO_CMD} $${args} ; \ - done; \ - fi \ - done) -.endif -.endif - -.if !target(fetch-urlall-list) -fetch-urlall-list: - @LISTALL=yes ${MAKE} fetch-url-list-int -.endif - -.if !target(fetch-url-list) -fetch-url-list: - @${MAKE} fetch-url-list-int -.endif - -# Generates patches. - -update-patches: - @toedit=`PATCH_WRKSRC=${PATCH_WRKSRC} \ - PATCHDIR=${PATCHDIR} \ - PATCH_LIST=${PATCHDIR}/patch-* \ - DIFF_ARGS=${DIFF_ARGS} \ - DISTORIG=${DISTORIG} \ - ${SH} ${PORTSDIR}/Tools/scripts/update-patches`; \ - case $$toedit in "");; \ - *) ${ECHO_CMD} -n 'edit patches: '; read i; \ - cd ${PATCHDIR} && $${VISUAL:-$${EDIT:-/usr/bin/vi}} $$toedit;; esac - -# Checksumming utilities - -check-checksum-algorithms: - @ \ - ${checksum_init} \ - \ - for alg in ${CHECKSUM_ALGORITHMS:U}; do \ - eval alg_executable=\$$$$alg; \ - if [ -z "$$alg_executable" ]; then \ - ${ECHO_MSG} "Checksum algorithm $$alg: Couldn't find the executable."; \ - ${ECHO_MSG} "Set $$alg=/path/to/$$alg in /etc/make.conf and try again."; \ - exit 1; \ - fi; \ - done; \ - -checksum_init=\ - SHA256=${SHA256}; \ - MD5=${MD5}; - -.if !target(makesum) -makesum: check-checksum-algorithms - @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} fetch NO_CHECKSUM=yes \ - DISABLE_SIZE=yes - @if [ -f ${MD5_FILE} ]; then ${CAT} /dev/null > ${MD5_FILE}; fi - @( \ - cd ${DISTDIR}; \ - \ - ${checksum_init} \ - \ - for file in ${_CKSUMFILES}; do \ - for alg in ${CHECKSUM_ALGORITHMS:U}; do \ - eval alg_executable=\$$$$alg; \ - \ - if [ $$alg_executable != "NO" ]; then \ - $$alg_executable $$file >> ${MD5_FILE}; \ - fi; \ - done; \ - if [ -z "${NO_SIZE}" ]; then \ - ${ECHO_CMD} "SIZE ($$file) = "`${LS} -ALln $$file | ${AWK} '{print $$5}'` >> ${MD5_FILE}; \ - fi; \ - done \ - ) - @for file in ${_IGNOREFILES}; do \ - for alg in ${CHECKSUM_ALGORITHMS:U}; do \ - ${ECHO_CMD} "$$alg ($$file) = IGNORE" >> ${MD5_FILE}; \ - done; \ - done -.endif - -.if !target(checksum) -checksum: fetch check-checksum-algorithms - @${checksum_init} \ - if [ -f ${MD5_FILE} ]; then \ - cd ${DISTDIR}; OK="";\ - for file in ${_CKSUMFILES}; do \ - ignored="true"; \ - _file=$${file#${DIST_SUBDIR}/*}; \ - for alg in ${CHECKSUM_ALGORITHMS:U}; do \ - ignore="false"; \ - eval alg_executable=\$$$$alg; \ - \ - if [ $$alg_executable != "NO" ]; then \ - MKSUM=`$$alg_executable < $$file`; \ - CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \ - else \ - ignore="true"; \ - fi; \ - \ - if [ $$ignore = "false" -a -z "$$CKSUM" ]; then \ - ${ECHO_MSG} "=> No $$alg checksum recorded for $$file."; \ - ignore="true"; \ - fi; \ - \ - if [ "$$CKSUM" = "IGNORE" ]; then \ - ${ECHO_MSG} "=> $$alg Checksum for $$file is set to IGNORE in distinfo file even though"; \ - ${ECHO_MSG} " the file is not in the "'$$'"{IGNOREFILES} list."; \ - ignore="true"; \ - OK=${FALSE}; \ - fi; \ - \ - if [ $$ignore = "false" ]; then \ - match="false"; \ - for chksum in $$CKSUM; do \ - if [ "$$chksum" = "$$MKSUM" ]; then \ - match="true"; \ - break; \ - fi; \ - done; \ - if [ $$match = "true" ]; then \ - ${ECHO_MSG} "=> $$alg Checksum OK for $$file."; \ - ignored="false"; \ - else \ - ${ECHO_MSG} "=> $$alg Checksum mismatch for $$file."; \ - refetchlist="$$refetchlist$$file "; \ - OK="$${OK:-retry}"; \ - ignored="false"; \ - fi; \ - fi; \ - done; \ - \ - if [ $$ignored = "true" ]; then \ - ${ECHO_MSG} "=> No suitable checksum found for $$file."; \ - OK="${FALSE}"; \ - fi; \ - \ - done; \ - \ - for file in ${_IGNOREFILES}; do \ - _file=$${file#${DIST_SUBDIR}/*}; \ - ignored="true"; \ - alreadymatched="false"; \ - for alg in ${CHECKSUM_ALGORITHMS:U}; do \ - ignore="false"; \ - eval alg_executable=\$$$$alg; \ - \ - if [ $$alg_executable != "NO" ]; then \ - CKSUM=`file=$$_file; ${DISTINFO_DATA}`; \ - else \ - ignore="true"; \ - fi; \ - \ - if [ $$ignore = "false" ]; then \ - if [ -z "$$CKSUM" ]; then \ - ${ECHO_MSG} "=> No $$alg checksum for $$file recorded (expected IGNORE)"; \ - OK="$$alreadymatched"; \ - elif [ $$CKSUM != "IGNORE" ]; then \ - ${ECHO_MSG} "=> $$alg Checksum for $$file is not set to IGNORE in distinfo file even though"; \ - ${ECHO_MSG} " the file is in the "'$$'"{IGNOREFILES} list."; \ - OK="false"; \ - else \ - ignored="false"; \ - alreadymatched="true"; \ - fi; \ - fi; \ - done; \ - \ - if ( [ $$ignored = "true" ]) ; then \ - ${ECHO_MSG} "=> No suitable checksum found for $$file."; \ - OK="false"; \ - fi; \ - \ - done; \ - \ - if [ "$${OK:=true}" = "retry" ] && [ ${FETCH_REGET} -gt 0 ]; then \ - ${ECHO_MSG} "===> Refetch for ${FETCH_REGET} more times files: $$refetchlist"; \ - if ( cd ${.CURDIR} && \ - ${MAKE} ${.MAKEFLAGS} FORCE_FETCH="$$refetchlist" FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" fetch); then \ - if ( cd ${.CURDIR} && \ - ${MAKE} ${.MAKEFLAGS} FETCH_REGET="`${EXPR} ${FETCH_REGET} - 1`" checksum ); then \ - OK="true"; \ - fi; \ - fi; \ - fi; \ - \ - if [ "$$OK" != "true" -a ${FETCH_REGET} -eq 0 ]; then \ - ${ECHO_MSG} "===> Giving up on fetching files: $$refetchlist"; \ - ${ECHO_MSG} "Make sure the Makefile and distinfo file (${MD5_FILE})"; \ - ${ECHO_MSG} "are up to date. If you are absolutely sure you want to override this"; \ - ${ECHO_MSG} "check, type \"make NO_CHECKSUM=yes [other args]\"."; \ - exit 1; \ - fi; \ - if [ "$$OK" != "true" ]; then \ - exit 1; \ - fi; \ - elif [ -n "${_CKSUMFILES:M*}" ]; then \ - ${ECHO_MSG} "=> No checksum file (${MD5_FILE})."; \ - fi -.endif - -################################################################ -# The special package-building targets -# You probably won't need to touch these -################################################################ - -# Nobody should want to override this unless PKGNAME is simply bogus. - -.if !target(package-name) -package-name: - @${ECHO_CMD} ${PKGNAME} -.endif - -# Build a package but don't check the package cookie - -.if !target(repackage) -repackage: pre-repackage package - -pre-repackage: - @${RM} -f ${PACKAGE_COOKIE} -.endif - -# Build a package but don't check the cookie for installation, also don't -# install package cookie - -.if !target(package-noinstall) -package-noinstall: - @${MKDIR} ${WRKDIR} - @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} pre-package \ - pre-package-script do-package post-package-script - @${RM} -f ${TMPPLIST} - -@${RMDIR} ${WRKDIR} -.endif - -################################################################ -# Dependency checking -################################################################ - -.if !target(depends) -depends: extract-depends patch-depends lib-depends fetch-depends build-depends run-depends - -.if defined(ALWAYS_BUILD_DEPENDS) -_DEPEND_ALWAYS= 1 -.else -_DEPEND_ALWAYS= 0 -.endif - -_INSTALL_DEPENDS= \ - if [ X${USE_PACKAGE_DEPENDS} != "X" ]; then \ - subpkgfile=`(cd $$dir; ${MAKE} $$depends_args -V PKGFILE)`; \ - if [ -r "$${subpkgfile}" -a "$$target" = "${DEPENDS_TARGET}" ]; then \ - ${ECHO_MSG} "===> Installing existing package $${subpkgfile}"; \ - ${PKG_ADD} $${subpkgfile}; \ - else \ - (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \ - fi; \ - else \ - (cd $$dir; ${MAKE} -DINSTALLS_DEPENDS $$target $$depends_args) ; \ - fi; \ - ${ECHO_MSG} "===> Returning to build of ${PKGNAME}"; - -.for deptype in EXTRACT PATCH FETCH BUILD RUN -${deptype:L}-depends: -.if defined(${deptype}_DEPENDS) -.if !defined(NO_DEPENDS) - @for i in `${ECHO_CMD} "${${deptype}_DEPENDS}"`; do \ - prog=`${ECHO_CMD} $$i | ${SED} -e 's/:.*//'`; \ - dir=`${ECHO_CMD} $$i | ${SED} -e 's/[^:]*://'`; \ - if ${EXPR} "$$dir" : '.*:' > /dev/null; then \ - target=`${ECHO_CMD} $$dir | ${SED} -e 's/.*://'`; \ - dir=`${ECHO_CMD} $$dir | ${SED} -e 's/:.*//'`; \ - if [ X${DEPENDS_PRECLEAN} != "X" ]; then \ - target="clean $$target"; \ - depends_args="$$depends_args NOCLEANDEPENDS=yes"; \ - fi; \ - if [ X${DEPENDS_CLEAN} != "X" ]; then \ - target="$$target clean"; \ - depends_args="$$depends_args NOCLEANDEPENDS=yes"; \ - fi; \ - else \ - target="${DEPENDS_TARGET}"; \ - depends_args="${DEPENDS_ARGS}"; \ - fi; \ - if ${EXPR} "$$prog" : \\/ >/dev/null; then \ - if [ -e "$$prog" ]; then \ - if [ "$$prog" = "${NONEXISTENT}" ]; then \ - ${ECHO_MSG} "Error: ${NONEXISTENT} exists. Please remove it, and restart the build."; \ - ${FALSE}; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - found"; \ - if [ ${_DEPEND_ALWAYS} = 1 ]; then \ - ${ECHO_MSG} " (but building it anyway)"; \ - notfound=1; \ - else \ - notfound=0; \ - fi; \ - fi; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on file: $$prog - not found"; \ - notfound=1; \ - fi; \ - else \ - case $${prog} in \ - *\>*|*\<*|*=*) pkg=yes;; \ - *) pkg="";; \ - esac; \ - if [ "$$pkg" != "" ]; then \ - if ${PKG_INFO} "$$prog" > /dev/null 2>&1 ; then \ - ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - found"; \ - if [ ${_DEPEND_ALWAYS} = 1 ]; then \ - ${ECHO_MSG} " (but building it anyway)"; \ - notfound=1; \ - else \ - notfound=0; \ - fi; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on package: $$prog - not found"; \ - notfound=1; \ - fi; \ - if [ $$notfound != 0 ]; then \ - inverse_dep=`${ECHO_CMD} $$prog | ${SED} \ - -e 's/<=/=gt=/; s/</=ge=/; s/>=/=lt=/; s/>/=le=/' \ - -e 's/=gt=/>/; s/=ge=/>=/; s/=lt=/</; s/=le=/<=/'`; \ - pkg_info=`${PKG_INFO} -E "$$inverse_dep" || ${TRUE}`; \ - if [ "$$pkg_info" != "" ]; then \ - ${ECHO_MSG} "===> Found $$pkg_info, but you need to upgrade to $$prog."; \ - exit 1; \ - fi; \ - fi; \ - elif ${WHICH} "$$prog" > /dev/null 2>&1 ; then \ - ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - found"; \ - if [ ${_DEPEND_ALWAYS} = 1 ]; then \ - ${ECHO_MSG} " (but building it anyway)"; \ - notfound=1; \ - else \ - notfound=0; \ - fi; \ - else \ - ${ECHO_MSG} "===> ${PKGNAME} depends on executable: $$prog - not found"; \ - notfound=1; \ - fi; \ - fi; \ - if [ $$notfound != 0 ]; then \ - ${ECHO_MSG} "===> Verifying $$target for $$prog in $$dir"; \ - if [ ! -d "$$dir" ]; then \ - ${ECHO_MSG} " => No directory for $$prog. Skipping.."; \ - else \ - ${_INSTALL_DEPENDS} \ - fi; \ - fi; \ - done -.endif -.else - @${DO_NADA} -.endif -.endfor - -lib-depends: -.if defined(LIB_DEPENDS) && !defined(NO_DEPENDS) - @for i in ${LIB_DEPENDS}; do \ - lib=$${i%%:*}; \ - case $$lib in \ - *.*.*) pattern="`${ECHO_CMD} $$lib | ${SED} -e 's/\./\\\\./g'`" ;;\ - *.*) pattern="$${lib%%.*}\.$${lib#*.}" ;;\ - *) pattern="$$lib" ;;\ - esac; \ - dir=$${i#*:}; \ - target=$${i##*:}; \ - if ${TEST} $$dir = $$target; then \ - target="${DEPENDS_TARGET}"; \ - depends_args="${DEPENDS_ARGS}"; \ - else \ - dir=$${dir%%:*}; \ - fi; \ - ${ECHO_MSG} -n "===> ${PKGNAME} depends on shared library: $$lib"; \ - if ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \ - ${ECHO_MSG} " - found"; \ - if [ ${_DEPEND_ALWAYS} = 1 ]; then \ - ${ECHO_MSG} " (but building it anyway)"; \ - notfound=1; \ - else \ - notfound=0; \ - fi; \ - else \ - ${ECHO_MSG} " - not found"; \ - notfound=1; \ - fi; \ - if [ $$notfound != 0 ]; then \ - ${ECHO_MSG} "===> Verifying $$target for $$lib in $$dir"; \ - if [ ! -d "$$dir" ]; then \ - ${ECHO_MSG} " => No directory for $$lib. Skipping.."; \ - else \ - ${_INSTALL_DEPENDS} \ - if ! ${LDCONFIG} ${_LDCONFIG_FLAGS} -r | ${GREP} -vwF -e "${PKGCOMPATDIR}" | ${GREP} -qwE -e "-l$$pattern"; then \ - ${ECHO_MSG} "Error: shared library \"$$lib\" does not exist"; \ - ${FALSE}; \ - fi; \ - fi; \ - fi; \ - done -.endif - -.endif - -# Dependency lists: both build and runtime, recursive. Print out directory names. - -_UNIFIED_DEPENDS=${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS} ${RUN_DEPENDS} -_DEPEND_DIRS= ${_UNIFIED_DEPENDS:C,^[^:]*:([^:]*).*$,\1,} - -all-depends-list: - @${ALL-DEPENDS-LIST} - -ALL-DEPENDS-LIST= \ - L="${_DEPEND_DIRS}"; \ - checked=""; \ - while [ -n "$$L" ]; do \ - l=""; \ - for d in $$L; do \ - case $$checked in \ - $$d\ *|*\ $$d\ *|*\ $$d) \ - continue;; \ - esac; \ - checked="$$checked $$d"; \ - if [ ! -d $$d ]; then \ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - ${ECHO_CMD} $$d; \ - if ! children=$$(cd $$d && ${MAKE} -V _DEPEND_DIRS); then\ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - for child in $$children; do \ - case "$$checked $$l" in \ - $$child\ *|*\ $$child\ *|*\ $$child) \ - continue;; \ - esac; \ - l="$$l $$child"; \ - done; \ - done; \ - L=$$l; \ - done - -CLEAN-DEPENDS-FULL= \ - L="${_DEPEND_DIRS}"; \ - checked=""; \ - while [ -n "$$L" ]; do \ - l=""; \ - for d in $$L; do \ - case $$checked in \ - $$d\ *|*\ $$d\ *|*\ $$d) \ - continue;; \ - esac; \ - checked="$$checked $$d"; \ - if [ ! -d $$d ]; then \ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - state=0; \ - for child in $$children; do \ - case $$state in \ - 0) \ - if [ -d $$child ]; then \ - ${ECHO_CMD} $$d; \ - fi; \ - state=1;; \ - 1) \ - case "$$checked $$l" in \ - $$child\ *|*\ $$child\ *|*\ $$child) \ - continue;; \ - esac; \ - l="$$l $$child";; \ - esac; \ - done; \ - done; \ - L=$$l; \ - done - -CLEAN-DEPENDS-LIMITED= \ - L="${_DEPEND_DIRS}"; \ - checked=""; \ - while [ -n "$$L" ]; do \ - l=""; \ - for d in $$L; do \ - case $$checked in \ - $$d\ *|*\ $$d\ *|*\ $$d) \ - continue;; \ - esac; \ - checked="$$checked $$d"; \ - if [ ! -d $$d ]; then \ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" non-existent -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - if ! children=$$(cd $$d && ${MAKE} -V WRKDIR -V _DEPEND_DIRS); then \ - ${ECHO_MSG} "${PKGNAME}: \"$$d\" erroneous -- dependency list incomplete" >&2; \ - continue; \ - fi; \ - state=0; \ - for child in $$children; do \ - case $$state in \ - 0) \ - if [ ! -d $$child ]; then \ - break; \ - fi; \ - state=1; \ - ${ECHO_CMD} $$d;; \ - 1) \ - case "$$checked $$l" in \ - $$child\ *|*\ $$child\ *|*\ $$child) \ - continue;; \ - esac; \ - l="$$l $$child";; \ - esac; \ - done; \ - done; \ - L=$$l; \ - done - -.if !target(clean-depends) -clean-depends: - @for dir in $$(${CLEAN-DEPENDS-FULL}); do \ - (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \ - done -.endif - -.if !target(limited-clean-depends) -limited-clean-depends: - @for dir in $$(${CLEAN-DEPENDS-LIMITED}); do \ - (cd $$dir; ${MAKE} NOCLEANDEPENDS=yes clean); \ - done -.endif - -.if !target(deinstall-depends) -deinstall-depends: - @for dir in $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} deinstall); \ - done -.endif - -.if !target(fetch-recursive) -fetch-recursive: - @${ECHO_MSG} "===> Fetching all distfiles for ${PKGNAME} and dependencies" - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} fetch); \ - done -.endif - -.if !target(fetch-recursive-list) -fetch-recursive-list: - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} fetch-list); \ - done -.endif - -# Used by fetch-required and fetch-required list, this script looks -# at each of the dependencies. If 3 items are specified in the tuple, -# such as foo:${PORTSDIR}/graphics/foo:extract, the first item (foo) -# is examined. Only if it begins with a / and does not exist on the -# file-system will ``make targ'' proceed. -# For more usual (dual-item) dependency tuples, the ``make targ'' -# proceeds, if the exact package, which the directory WOULD'VE installed, -# is not yet installed. -# This is the exact behaviour of the old code, and it may need -# revisiting. For example, the entire first case seems dubious, and in -# the second case we, probably, should be satisfied with _any_ (earlier) -# package, with the same origin as that of the dir. -# -# -mi -FETCH_LIST?= for i in $$deps; do \ - prog=$${i%%:*}; dir=$${i\#*:}; \ - case $$dir in \ - *:*) if [ $$prog != $${prog\#/} -o ! -e $$prog ]; then \ - dir=$${dir%%:*}; \ - else \ - continue; \ - fi;; \ - *) if [ -d ${PKG_DBDIR}/$$(cd $$dir; ${MAKE} -V PKGNAME) ]; then \ - continue; \ - fi;; \ - esac; \ - echo cd $$dir; ${MAKE} $$targ; \ - done - -.if !target(fetch-required) -fetch-required: fetch -.if defined(NO_DEPENDS) - @${ECHO_MSG} "===> NO_DEPENDS is set, not fetching any distfiles for ${PKG_NAME}" -.else - @${ECHO_MSG} "===> Fetching all required distfiles for ${PKGNAME} and dependencies" -.for deptype in EXTRACT PATCH FETCH BUILD RUN -.if defined(${deptype}_DEPENDS) - @targ=fetch; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST} -.endif -.endfor -.endif - -.endif - -.if !target(fetch-required-list) -fetch-required-list: fetch-list -.if !defined(NO_DEPENDS) -.for deptype in EXTRACT PATCH FETCH BUILD RUN -.if defined(${deptype}_DEPENDS) - @targ=fetch-list; deps="${${deptype}_DEPENDS}"; ${FETCH_LIST} -.endif -.endfor -.endif -.endif - -.if !target(checksum-recursive) -checksum-recursive: - @${ECHO_MSG} "===> Fetching and checking checksums for ${PKGNAME} and dependencies" - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} checksum); \ - done -.endif - -# Dependency lists: build and runtime. Print out directory names. - -build-depends-list: -.if defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) - @${BUILD-DEPENDS-LIST} -.endif - -BUILD-DEPENDS-LIST= \ - for dir in $$(${ECHO_CMD} "${EXTRACT_DEPENDS} ${PATCH_DEPENDS} ${FETCH_DEPENDS} ${BUILD_DEPENDS} ${LIB_DEPENDS}" | ${SED} -E -e 's,([^: ]*):([^: ]*)(:[^ ]*)?,\2,g' -e 'y/ /\n/'| ${SORT} -u); do \ - if [ -d $$dir ]; then \ - ${ECHO_CMD} $$dir; \ - else \ - ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ - fi; \ - done | ${SORT} -u - -run-depends-list: -.if defined(LIB_DEPENDS) || defined(RUN_DEPENDS) - @${RUN-DEPENDS-LIST} -.endif - -RUN-DEPENDS-LIST= \ - for dir in $$(${ECHO_CMD} "${_LIB_RUN_DEPENDS:C,.*:([^:]*).*,\1,}" | ${SED} -e 'y/ /\n/' | ${SORT} -u); do \ - if [ -d $$dir ]; then \ - ${ECHO_CMD} $$dir; \ - else \ - ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ - fi; \ - done | ${SORT} -u - -# Package (recursive runtime) dependency list. Print out both directory names -# and package names. - -package-depends-list: -.if defined(CHILD_DEPENDS) || defined(LIB_DEPENDS) || defined(RUN_DEPENDS) - @${PACKAGE-DEPENDS-LIST} -.endif - -_LIB_RUN_DEPENDS= ${LIB_DEPENDS} ${RUN_DEPENDS} -PACKAGE-DEPENDS-LIST?= \ - if [ "${CHILD_DEPENDS}" ]; then \ - installed=$$(${PKG_INFO} -qO ${PKGORIGIN} 2>/dev/null || \ - ${TRUE}); \ - if [ "$$installed" ]; then \ - break; \ - fi; \ - if [ -z "$$installed" ]; then \ - installed="${PKGNAME}"; \ - fi; \ - for pkgname in $$installed; do \ - ${ECHO_CMD} "$$pkgname ${.CURDIR} ${PKGORIGIN}"; \ - done; \ - fi; \ - checked="${PARENT_CHECKED}"; \ - for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \ - dir=$$(${REALPATH} $$dir); \ - if [ -d $$dir ]; then \ - case $$checked in \ - $$dir|$$dir\ *|*\ $$dir|*\ $$dir\ *) continue;; \ - esac; \ - childout=$$(cd $$dir; ${MAKE} CHILD_DEPENDS=yes PARENT_CHECKED="$$checked" package-depends-list); \ - set -- $$childout; \ - childdir=""; \ - while [ $$\# != 0 ]; do \ - childdir="$$childdir $$2"; \ - ${ECHO_CMD} "$$1 $$2 $$3"; \ - shift 3; \ - done; \ - checked="$$dir $$childdir $$checked"; \ - else \ - ${ECHO_MSG} "${PKGNAME}: \"$$dir\" non-existent -- dependency list incomplete" >&2; \ - fi; \ - done - -ACTUAL-PACKAGE-DEPENDS?= \ - if [ "${_LIB_RUN_DEPENDS}" != " " ]; then \ - origins=$$(for pkgname in ${PKG_DBDIR}/*; do \ - if [ -e $$pkgname/+CONTENTS ]; then \ - ${ECHO_CMD} $${pkgname\#\#*/}; \ - ${SED} -n -e "s/@comment ORIGIN://p" $$pkgname/+CONTENTS; \ - fi; \ - done); \ - for dir in ${_LIB_RUN_DEPENDS:C,[^:]*:([^:]*):?.*,\1,}; do \ - tmp=$${dir%/*}; \ - dir=$${tmp\#\#*/}/$${dir\#\#*/}; \ - set -- $$origins; \ - while [ $$\# -gt 1 ]; do \ - if [ "$$dir" = "$$2" ]; then \ - ${ECHO_CMD} $$1:$$dir; \ - if [ -e ${PKG_DBDIR}/$$1/+CONTENTS -a -z "${EXPLICIT_PACKAGE_DEPENDS}" ]; then \ - packagelist="$$packagelist ${PKG_DBDIR}/$$1/+CONTENTS"; \ - fi; \ - break; \ - fi; \ - shift 2; \ - done; \ - done; \ - [ -z "$$packagelist" ] || ${AWK} -F '( |:)' 'BEGIN { pkgname="broken_contents" } /@pkgdep / { pkgname=$$2 } /@comment DEPORIGIN:/ { printf "%s:%s\n", pkgname, $$3; pkgname="broken_contents" }' $$packagelist; \ - fi - -# Print out package names. - -package-depends: - @${PACKAGE-DEPENDS-LIST} | ${AWK} '{print $$1":"$$3}' - -actual-package-depends: - @${ACTUAL-PACKAGE-DEPENDS} - -# Build packages for port and dependencies - -package-recursive: package - @for dir in $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} package-noinstall); \ - done - -# Show missing dependiencies -missing: - @for dir in $$(${ALL-DEPENDS-LIST}); do \ - THISORIGIN=$${dir##${PORTSDIR}/}; \ - installed=$$(${PKG_INFO} -qO $${THISORIGIN}); \ - if [ -z "$$installed" ]; then \ - ${ECHO_CMD} $$THISORIGIN; \ - fi; \ - done - -################################################################ -# Everything after here are internal targets and really -# shouldn't be touched by anybody but the release engineers. -################################################################ - -# This target generates an index entry suitable for aggregation into -# a large index. Format is: -# -# distribution-name|port-path|installation-prefix|comment| \ -# description-file|maintainer|categories|extract-depends| \ -# patch-depends|fetch-depends|build-depends|run-depends|www site -# -# If this ever changes, portmgr should contact the portsnap maintainer -# first to avoid gratuitous breakage. - -.if !target(describe) -describe: - @${ECHO_CMD} -n "${PKGNAME}|${.CURDIR}|${PREFIX}|" -.if defined(COMMENT) - @${ECHO_CMD} -n ${COMMENT:Q} -.else - @${ECHO_CMD} -n '** No Description' -.endif - @perl -e ' \ - if ( -f q{${DESCR}} ) { \ - print q{|${DESCR}}; \ - } else { \ - print q{|/dev/null}; \ - } \ - print q{|${MAINTAINER}|${CATEGORIES}|}; \ - @edirs = map((split /:/)[1], split(q{ }, q{${EXTRACT_DEPENDS}})); \ - @pdirs = map((split /:/)[1], split(q{ }, q{${PATCH_DEPENDS}})); \ - @fdirs = map((split /:/)[1], split(q{ }, q{${FETCH_DEPENDS}})); \ - @bdirs = map((split /:/)[1], split(q{ }, q{${BUILD_DEPENDS}})); \ - @rdirs = map((split /:/)[1], split(q{ }, q{${RUN_DEPENDS}})); \ - @ldirs = map((split /:/)[1], split(q{ }, q{${LIB_DEPENDS}})); \ - for my $$i (\@edirs, \@pdirs, \@fdirs, \@bdirs, \@rdirs, \@ddirs, \@ldirs) { \ - my @dirs = @$$i; \ - @$$i = (); \ - for (@dirs) { \ - if (-d $$_) { \ - push @$$i, $$_; \ - } else { \ - print STDERR qq{${PKGNAME}: \"$$_\" non-existent -- dependency list incomplete\n}; \ - exit(1); \ - } \ - } \ - } \ - for (@edirs, @ddirs) { \ - $$xe{$$_} = 1; \ - } \ - print join(q{ }, sort keys %xe), q{|}; \ - for (@pdirs, @ddirs) { \ - $$xp{$$_} = 1; \ - } \ - print join(q{ }, sort keys %xp), q{|}; \ - for (@fdirs, @ddirs) { \ - $$xf{$$_} = 1; \ - } \ - print join(q{ }, sort keys %xf), q{|}; \ - for (@bdirs, @ddirs, @ldirs) { \ - $$xb{$$_} = 1; \ - } \ - print join(q{ }, sort keys %xb), q{|}; \ - for (@rdirs, @ddirs, @ldirs) { \ - $$xr{$$_} = 1; \ - } \ - print join(q{ }, sort keys %xr), q{|}; \ - if (open(DESCR, q{${DESCR}})) { \ - while (<DESCR>) { \ - if (/^WWW:\s+(\S+)/) { \ - print $$1; \ - last; \ - } \ - } \ - } \ - print qq{\n};' -.endif - -www-site: -.if exists(${DESCR}) - @${AWK} '$$1 ~ /^WWW:/ {print $$2}' ${DESCR} | ${HEAD} -1 -.else - @${ECHO_CMD} -.endif - -.if !target(readmes) -readmes: readme -.endif - -.if !target(readme) -readme: - @${RM} -f ${.CURDIR}/README.html - @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} ${.CURDIR}/README.html -.endif - -${.CURDIR}/README.html: - @${ECHO_MSG} "===> Creating README.html for ${PKGNAME}" - @__softMAKEFLAGS='${__softMAKEFLAGS:S/'/'\''/g}'; \ - ${SED} -e 's|%%PORT%%|'$$(${ECHO_CMD} ${.CURDIR} | \ - ${SED} -e 's|.*/\([^/]*/[^/]*\)$$|\1|')'|g' \ - -e 's|%%PKG%%|${PKGNAME}|g' \ - -e 's|%%COMMENT%%|'"$$(${ECHO_CMD} ${COMMENT:Q})"'|' \ - -e '/%%COMMENT%%/d' \ - -e 's|%%DESCR%%|'"$$(${ECHO_CMD} ${DESCR} | \ - ${SED} -e 's|${.CURDIR}/||')"'|' \ - -e 's|%%EMAIL%%|'"$$(${ECHO_CMD} "${MAINTAINER}" | \ - ${SED} -e 's/([^)]*)//;s/.*<//;s/>.*//')"'|g' \ - -e 's|%%MAINTAINER%%|${MAINTAINER}|g' \ - -e 's|%%WEBSITE%%|'"$$(cd ${.CURDIR} && eval ${MAKE} \ - $${__softMAKEFLAGS} pretty-print-www-site)"'|' \ - -e 's|%%BUILD_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} \ - $${__softMAKEFLAGS} pretty-print-build-depends-list)"'|' \ - -e 's|%%RUN_DEPENDS%%|'"$$(cd ${.CURDIR} && eval ${MAKE} \ - $${__softMAKEFLAGS} pretty-print-run-depends-list)"'|' \ - -e 's|%%TOP%%|'"$$(${ECHO_CMD} ${CATEGORIES} | \ - ${SED} -e 's| .*||' -e 's|[^/]*|..|g')"'/..|' \ - ${TEMPLATES}/README.port >> $@ - -# The following two targets require an up-to-date INDEX in ${PORTSDIR} - -_PRETTY_PRINT_DEPENDS_LIST=\ - if [ ! -r ${INDEXDIR}/${INDEXFILE} ] ; then \ - ${ECHO_MSG} "${.TARGET} requires an INDEX file (${INDEXFILE}). Please run make index or make fetchindex."; \ - else \ - target=${.TARGET:C/pretty-print-(.*)-depends-list/\1/} ; \ - if [ "$$target" = "build" ] ; then fldnum=8 ; else fldnum=9 ; fi; \ - ${ECHO_MSG} -n 'This port requires package(s) "' ; \ - ${ECHO_MSG} -n `${AWK} -F\| "\\$$1 ~ /^${PKGNAME}/ {print \\$$$${fldnum};}" ${INDEXDIR}/${INDEXFILE}` ; \ - ${ECHO_MSG} "\" to $$target."; \ - fi; - - -.if !target(pretty-print-build-depends-list) -pretty-print-build-depends-list: -.if defined(EXTRACT_DEPENDS) || defined(PATCH_DEPENDS) || \ - defined(FETCH_DEPENDS) || defined(BUILD_DEPENDS) || defined(LIB_DEPENDS) - @${_PRETTY_PRINT_DEPENDS_LIST} -.endif -.endif - -.if !target(pretty-print-run-depends-list) -pretty-print-run-depends-list: -.if defined(RUN_DEPENDS) || defined(LIB_DEPENDS) - @${_PRETTY_PRINT_DEPENDS_LIST} -.endif -.endif - -_SUB_LIST_TEMP= ${SUB_LIST:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -.if !target(apply-slist) -apply-slist: -.if defined(SUB_FILES) -.for file in ${SUB_FILES} -.if !exists(${FILESDIR}/${file}.in) - @${ECHO_MSG} "** Missing ${FILESDIR}/${file}.in for ${PKGNAME}."; exit 1 -.else - @${SED} ${_SUB_LIST_TEMP} -e '/^@comment /d' ${FILESDIR}/${file}.in > ${WRKDIR}/${file} -.endif -.endfor -.for i in pkg-message pkg-install pkg-deinstall pkg-req -.if ${SUB_FILES:M${i}*}!="" -${i:S/-//:U}= ${WRKDIR}/${SUB_FILES:M${i}*} -.endif -.endfor -.endif -.endif - -# Generate packing list. Also tests to make sure all required package -# files exist. - -.if !target(generate-plist) -generate-plist: - @${ECHO_MSG} "===> Generating temporary packing list" - @${MKDIR} `${DIRNAME} ${TMPPLIST}` - @if [ ! -f ${DESCR} ]; then ${ECHO_MSG} "** Missing pkg-descr for ${PKGNAME}."; exit 1; fi - @>${TMPPLIST} - @for file in ${PLIST_FILES}; do \ - ${ECHO_CMD} $${file} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} >> ${TMPPLIST}; \ - done - @for man in ${__MANPAGES}; do \ - ${ECHO_CMD} $${man} >> ${TMPPLIST}; \ - done -.for _PREFIX in ${PREFIX} -.if ${_TMLINKS:M${_PREFIX}*}x != x - @for i in ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||}; do \ - ${ECHO_CMD} "$$i" >> ${TMPPLIST}; \ - done -.endif -.if ${_TMLINKS:N${_PREFIX}*}x != x - @${ECHO_CMD} @cwd / >> ${TMPPLIST} - @for i in ${_TMLINKS:N${_PREFIX}*:S|^/||}; do \ - ${ECHO_CMD} "$$i" >> ${TMPPLIST}; \ - done - @${ECHO_CMD} '@cwd ${PREFIX}' >> ${TMPPLIST} -.endif - @for i in $$(${ECHO_CMD} ${__MANPAGES} ${_TMLINKS:M${_PREFIX}*:S|^${_PREFIX}/||} ' ' | ${SED} -E -e 's|man([1-9ln])/([^/ ]+) |cat\1/\2 |g'); do \ - ${ECHO_CMD} "@unexec rm -f %D/$$i %D/$${i%.gz} %D/$${i%.bz2} %D/$$i.gz %D/$$i.bz2" >> ${TMPPLIST}; \ - done -.endfor - @if [ -f ${PLIST} ]; then \ - ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} ${PLIST} >> ${TMPPLIST}; \ - fi -.for reinplace in ${PLIST_REINPLACE} -.if defined(PLIST_REINPLACE_${reinplace:U}) - @${SED} -i "" -e '${PLIST_REINPLACE_${reinplace:U}}' ${TMPPLIST} -.endif -.endfor - -.for dir in ${PLIST_DIRS} - @${ECHO_CMD} ${dir} | ${SED} ${PLIST_SUB:S/$/!g/:S/^/ -e s!%%/:S/=/%%!/} -e 's,^,@dirrm ,' >> ${TMPPLIST} -.endfor -# To be removed once INSTALLS_SHLIB has been eradicated. -.if defined(INSTALLS_SHLIB) && !defined(INSTALL_AS_USER) - @${ECHO_CMD} "@exec ${LDCONFIG_PLIST_EXEC_CMD}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG_PLIST_UNEXEC_CMD}" >> ${TMPPLIST} -.elif defined(INSTALLS_SHLIB) - @${ECHO_CMD} "@exec ${LDCONFIG_PLIST_EXEC_CMD} || ${TRUE}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG_PLIST_UNEXEC_CMD} || ${TRUE}" >> ${TMPPLIST} -.endif -.if defined(USE_LDCONFIG) -.if !defined(INSTALL_AS_USER) - @${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG} -R" >> ${TMPPLIST} -.else - @${ECHO_CMD} "@exec ${LDCONFIG} -m ${USE_LDCONFIG} || ${TRUE}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG} -R || ${TRUE}" >> ${TMPPLIST} -.endif -.endif -.if defined(USE_LDCONFIG32) -.if !defined(INSTALL_AS_USER) - @${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R" >> ${TMPPLIST} -.else - @${ECHO_CMD} "@exec ${LDCONFIG} -32 -m ${USE_LDCONFIG32} || ${TRUE}" >> ${TMPPLIST} - @${ECHO_CMD} "@unexec ${LDCONFIG} -32 -R || ${TRUE}" >> ${TMPPLIST} -.endif -.endif -.endif - -${TMPPLIST}: - @cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} generate-plist - -.if !target(add-plist-docs) -add-plist-docs: -.if defined(PORTDOCS) && !defined(NOPORTDOCS) - @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \ - [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \ - ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ - fi -.for x in ${PORTDOCS} - @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ - if [ ! -e ${DOCSDIR}/${x} ]; then \ - ${ECHO_CMD} ${DOCSDIR_REL}/${x} >> ${TMPPLIST}; \ - fi;fi -.endfor - @${FIND} -P ${PORTDOCS:S/^/${DOCSDIR}\//} ! -type d 2>/dev/null | \ - ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST} - @${FIND} -P -d ${PORTDOCS:S/^/${DOCSDIR}\//} -type d 2>/dev/null | \ - ${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST} - @${ECHO_CMD} "@dirrm ${DOCSDIR_REL}" >> ${TMPPLIST} -.else - @${DO_NADA} -.endif -.endif - -.if !target(add-plist-examples) -add-plist-examples: -.if defined(PORTEXAMPLES) && !defined(NOPORTEXAMPLES) - @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \ - [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \ - ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ - fi -.for x in ${PORTEXAMPLES} - @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ - if [ ! -e ${EXAMPLESDIR}/${x} ]; then \ - ${ECHO_CMD} ${EXAMPLESDIR}/${x} | \ - ${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \ - fi;fi -.endfor - @${FIND} -P ${PORTEXAMPLES:S/^/${EXAMPLESDIR}\//} ! -type d 2>/dev/null | \ - ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST} - @${FIND} -P -d ${PORTEXAMPLES:S/^/${EXAMPLESDIR}\//} -type d 2>/dev/null | \ - ${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST} - @${ECHO_CMD} "@dirrm ${EXAMPLESDIR:S,^${PREFIX}/,,}" >> ${TMPPLIST} -.else - @${DO_NADA} -.endif -.endif - -.if !target(add-plist-data) -add-plist-data: -.if defined(PORTDATA) && !defined(NOPORTDATA) - @if ${EGREP} -qe '^@cw?d' ${TMPPLIST} && \ - [ "`${SED} -En -e '/^@cw?d[ ]*/s,,,p' ${TMPPLIST} | ${TAIL} -n 1`" != "${PREFIX}" ]; then \ - ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ - fi -.for x in ${PORTDATA} - @if ${ECHO_CMD} "${x}"| ${AWK} '$$1 ~ /(\*|\||\[|\]|\?|\{|\}|\$$)/ { exit 1};'; then \ - if [ ! -e ${DATADIR}/${x} ]; then \ - ${ECHO_CMD} ${DATADIR}/${x} | \ - ${SED} -e 's,^${PREFIX}/,,' >> ${TMPPLIST}; \ - fi;fi -.endfor - @${FIND} -P ${PORTDATA:S/^/${DATADIR}\//} ! -type d 2>/dev/null | \ - ${SED} -ne 's,^${PREFIX}/,,p' >> ${TMPPLIST} - @${FIND} -P -d ${PORTDATA:S/^/${DATADIR}\//} -type d 2>/dev/null | \ - ${SED} -ne 's,^${PREFIX}/,@dirrm ,p' >> ${TMPPLIST} - @${ECHO_CMD} "@dirrm ${DATADIR:S,^${PREFIX}/,,}" >> ${TMPPLIST} -.else - @${DO_NADA} -.endif -.endif - -.if !target(add-plist-info) -add-plist-info: -# Process GNU INFO files at package install/deinstall time -.if defined(INFO) -.for i in ${INFO} - install-info --quiet ${PREFIX}/${INFO_PATH}/$i.info ${PREFIX}/${INFO_PATH}/dir - @${ECHO_CMD} "@unexec install-info --quiet --delete %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \ - >> ${TMPPLIST} - @${LS} ${PREFIX}/${INFO_PATH}/$i.info* | ${SED} -e s:${PREFIX}/::g >> ${TMPPLIST} - @${ECHO_CMD} "@exec install-info --quiet %D/${INFO_PATH}/$i.info %D/${INFO_PATH}/dir" \ - >> ${TMPPLIST} -.endfor -.if defined(INFO_SUBDIR) - @${ECHO_CMD} "@unexec ${RMDIR} %D/${INFO_PATH}/${INFO_SUBDIR} 2> /dev/null || true" >> ${TMPPLIST} -.endif -.if (${PREFIX} != "/usr") - @${ECHO_CMD} "@unexec if [ -f %D/${INFO_PATH}/dir ]; then if sed -e '1,/Menu:/d' %D/${INFO_PATH}/dir | grep -q '^[*] '; then true; else rm %D/${INFO_PATH}/dir; fi; fi" >> ${TMPPLIST} -.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${X11BASE} && ${PREFIX} != ${LINUXBASE}) - @${ECHO_CMD} "@unexec rmdir %D/${INFO_PATH} 2>/dev/null || true" >> ${TMPPLIST} -.endif -.endif -.endif -.endif - -# If we're installing into a non-standard PREFIX, we need to remove that directory at -# deinstall-time -.if !target(add-plist-post) -add-plist-post: -.if (${PREFIX} != ${LOCALBASE} && ${PREFIX} != ${X11BASE} && ${PREFIX} != ${LINUXBASE} && ${PREFIX} != "/usr") - @${ECHO_CMD} "@unexec rmdir %D 2> /dev/null || true" >> ${TMPPLIST} -.else - @${DO_NADA} -.endif -.endif - -.if !target(install-rc-script) -install-rc-script: -.if defined(USE_RCORDER) || defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES" -.if defined(USE_RCORDER) - @${ECHO_MSG} "===> Installing early rc.d startup script(s)" - @${ECHO_CMD} "@cwd /" >> ${TMPPLIST} - @for i in ${USE_RCORDER}; do \ - ${INSTALL_SCRIPT} ${WRKDIR}/$${i} /etc/rc.d/$${i%.sh}; \ - ${ECHO_CMD} "etc/rc.d/$${i%.sh}" >> ${TMPPLIST}; \ - done - @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST} -.endif -.if defined(USE_RC_SUBR) && ${USE_RC_SUBR:U} != "YES" - @${ECHO_MSG} "===> Installing rc.d startup script(s)" - @${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST} - @for i in ${USE_RC_SUBR}; do \ - ${INSTALL_SCRIPT} ${WRKDIR}/$${i} ${PREFIX}/etc/rc.d/$${i%.sh}${RC_SUBR_SUFFIX}; \ - ${ECHO_CMD} "etc/rc.d/$${i%.sh}${RC_SUBR_SUFFIX}" >> ${TMPPLIST}; \ - done -.endif -.else - @${DO_NADA} -.endif -.endif - -# Compress (or uncompress) and symlink manpages. -.if !target(compress-man) -compress-man: -.if defined(_MANPAGES) || defined(_MLINKS) -.if ${MANCOMPRESSED} == yes && defined(NOMANCOMPRESS) - @${ECHO_MSG} "===> Uncompressing manual pages for ${PKGNAME}" - @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GUNZIP_CMD} $${_manpages} ) || ${TRUE} -.elif ${MANCOMPRESSED} == no && !defined(NOMANCOMPRESS) - @${ECHO_MSG} "===> Compressing manual pages for ${PKGNAME}" - @_manpages='${_MANPAGES:S/'/'\''/g}' && [ "$${_manpages}" != "" ] && ( eval ${GZIP_CMD} $${_manpages} ) || ${TRUE} -.endif -.if defined(_MLINKS) - @set -- ${_MLINKS}; \ - while :; do \ - [ $$# -eq 0 ] && break || ${TRUE}; \ - ${RM} -f $${2%.gz}; ${RM} -f $$2.gz; \ - ${LN} -fs `${ECHO_CMD} $$1 $$2 | ${AWK} '{ \ - z=split($$1, a, /\//); x=split($$2, b, /\//); \ - while (a[i] == b[i]) i++; \ - for (q=i; q<x; q++) printf "../"; \ - for (; i<z; i++) printf a[i] "/"; printf a[z]; }'` $$2; \ - shift; shift; \ - done -.endif -.else - @${DO_NADA} -.endif -.endif - -# Fake installation of package so that user can pkg_delete it later. -# Also, make sure that an installed port is recognized correctly in -# accordance to the @pkgdep directive in the packing lists - -.if !target(fake-pkg) -fake-pkg: -.if !defined(NO_PKG_REGISTER) - @if [ ! -d ${PKG_DBDIR} ]; then ${RM} -f ${PKG_DBDIR}; ${MKDIR} ${PKG_DBDIR}; fi - @${RM} -f /tmp/${PKGNAME}-required-by -.if defined(FORCE_PKG_REGISTER) - @if [ -e ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY ]; then \ - ${CP} ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY /tmp/${PKGNAME}-required-by; \ - fi - @${RM} -rf ${PKG_DBDIR}/${PKGNAME} -.endif - @if [ ! -d ${PKG_DBDIR}/${PKGNAME} ]; then \ - ${ECHO_MSG} "===> Registering installation for ${PKGNAME}"; \ - ${MKDIR} ${PKG_DBDIR}/${PKGNAME}; \ - ${PKG_CMD} ${PKG_ARGS} -O ${PKGFILE} > ${PKG_DBDIR}/${PKGNAME}/+CONTENTS; \ - ${CP} ${DESCR} ${PKG_DBDIR}/${PKGNAME}/+DESC; \ - ${ECHO_CMD} ${COMMENT:Q} > ${PKG_DBDIR}/${PKGNAME}/+COMMENT; \ - if [ -f ${PKGINSTALL} ]; then \ - ${CP} ${PKGINSTALL} ${PKG_DBDIR}/${PKGNAME}/+INSTALL; \ - fi; \ - if [ -f ${PKGDEINSTALL} ]; then \ - ${CP} ${PKGDEINSTALL} ${PKG_DBDIR}/${PKGNAME}/+DEINSTALL; \ - fi; \ - if [ -f ${PKGREQ} ]; then \ - ${CP} ${PKGREQ} ${PKG_DBDIR}/${PKGNAME}/+REQUIRE; \ - fi; \ - if [ -f ${PKGMESSAGE} ]; then \ - ${CP} ${PKGMESSAGE} ${PKG_DBDIR}/${PKGNAME}/+DISPLAY; \ - fi; \ - for dep in `${PKG_INFO} -qf ${PKGNAME} | ${AWK} '/^@pkgdep / {print $$2}' | ${SORT} -u`; do \ - if [ -d ${PKG_DBDIR}/$$dep -a -z `${ECHO_CMD} $$dep | ${GREP} -E ${PKG_IGNORE_DEPENDS}` ]; then \ - if ! ${GREP} ^${PKGNAME}$$ ${PKG_DBDIR}/$$dep/+REQUIRED_BY \ - >/dev/null 2>&1; then \ - ${ECHO_CMD} ${PKGNAME} >> ${PKG_DBDIR}/$$dep/+REQUIRED_BY; \ - fi; \ - fi; \ - done; \ - fi -.if !defined(NO_MTREE) - @if [ -f ${MTREE_FILE} ]; then \ - ${CP} ${MTREE_FILE} ${PKG_DBDIR}/${PKGNAME}/+MTREE_DIRS; \ - fi -.endif - @if [ -e /tmp/${PKGNAME}-required-by ]; then \ - ${CAT} /tmp/${PKGNAME}-required-by >> ${PKG_DBDIR}/${PKGNAME}/+REQUIRED_BY; \ - ${RM} -f /tmp/${PKGNAME}-required-by; \ - fi -.else - @${DO_NADA} -.endif -.endif - -# Depend is generally meaningless for arbitrary ports, but if someone wants -# one they can override this. This is just to catch people who've gotten into -# the habit of typing `make depend all install' as a matter of course. -# -.if !target(depend) -depend: -.endif - -# Same goes for tags -.if !target(tags) -tags: -.endif - -.if !defined(NOPRECIOUSSOFTMAKEVARS) -.for softvar in CKSUMFILES _MLINKS -.if defined(${softvar}) -__softMAKEFLAGS+= '${softvar}+=${${softvar}:S/'/'\''/g}' -.endif -.endfor -.endif - -.if !defined(NOPRECIOUSMAKEVARS) -# These won't change, so we can pass them through the environment -.MAKEFLAGS: \ - ARCH="${ARCH:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ - OPSYS="${OPSYS:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ - OSREL="${OSREL:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ - OSVERSION="${OSVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" \ - SYSTEMVERSION="${SYSTEMVERSION:S/"/"'"'"/g:S/\$/\$\$/g:S/\\/\\\\/g}" -.endif - -.if !target(config) -config: -.if !defined(OPTIONS) - @${ECHO_MSG} "===> No options to configure" -.else -.if ${OPTIONSFILE} != ${_OPTIONSFILE} - @${ECHO_MSG} "===> Using wrong configuration file ${_OPTIONSFILE}" - @exit 1 -.endif -.if ${UID} != 0 && !defined(INSTALL_AS_USER) - @${ECHO_MSG} "===> Switching to root credentials to create `${DIRNAME} ${_OPTIONSFILE}`" - @(${SU_CMD} "${SH} -c \"${MKDIR} `${DIRNAME} ${_OPTIONSFILE}` 2> /dev/null\"") || \ - (${ECHO_MSG} "===> Cannot create `${DIRNAME} ${_OPTIONSFILE}`, check permissions"; exit 1) - @${ECHO_MSG} "===> Returning to user credentials" -.else - @(${MKDIR} `${DIRNAME} ${_OPTIONSFILE}` 2> /dev/null) || \ - (${ECHO_MSG} "===> Cannot create `${DIRNAME} ${_OPTIONSFILE}`, check permissions"; exit 1) -.endif - -@if [ -e ${_OPTIONSFILE} ]; then \ - . ${_OPTIONSFILE}; \ - fi; \ - set -- ${OPTIONS} XXX; \ - while [ $$# -gt 3 ]; do \ - OPTIONSLIST="$${OPTIONSLIST} $$1"; \ - defaultval=$$3; \ - withvar=WITH_$$1; \ - withoutvar=WITHOUT_$$1; \ - withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \ - withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \ - if [ ! -z "$${withval}" ]; then \ - val=on; \ - elif [ ! -z "$${withoutval}" ]; then \ - val=off; \ - else \ - val=$$3; \ - fi; \ - DEFOPTIONS="$${DEFOPTIONS} $$1 \"$$2\" $${val}"; \ - shift 3; \ - done; \ - TMPOPTIONSFILE=$$(mktemp -t portoptions); \ - trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \ - ${SH} -c "${DIALOG} --checklist \"Options for ${PKGNAME:C/-([^-]+)$/ \1/}\" 21 70 15 $${DEFOPTIONS} 2> $${TMPOPTIONSFILE}"; \ - status=$$?; \ - if [ $${status} -ne 0 ] ; then \ - ${RM} -f $${TMPOPTIONSFILE}; \ - ${ECHO_MSG} "===> Options unchanged"; \ - exit 0; \ - fi; \ - if [ ! -e ${TMPOPTIONSFILE} ]; then \ - ${ECHO_MSG} "===> No user-specified options to save for ${PKGNAME}"; \ - exit 0; \ - fi; \ - SELOPTIONS=$$(${CAT} $${TMPOPTIONSFILE}); \ - ${RM} -f $${TMPOPTIONSFILE}; \ - TMPOPTIONSFILE=$$(mktemp -t portoptions); \ - trap "${RM} -f $${TMPOPTIONSFILE}; exit 1" 1 2 3 5 10 13 15; \ - ${ECHO_CMD} "# This file is auto-generated by 'make config'." > $${TMPOPTIONSFILE}; \ - ${ECHO_CMD} "# No user-servicable parts inside!" >> $${TMPOPTIONSFILE}; \ - ${ECHO_CMD} "# Options for ${PKGNAME}" >> $${TMPOPTIONSFILE}; \ - ${ECHO_CMD} "_OPTIONS_READ=${PKGNAME}" >> $${TMPOPTIONSFILE}; \ - for i in $${OPTIONSLIST}; do \ - ${ECHO_CMD} $${SELOPTIONS} | ${GREP} -qw $${i}; \ - if [ $$? -eq 0 ]; then \ - ${ECHO_CMD} WITH_$${i}=true >> $${TMPOPTIONSFILE}; \ - else \ - ${ECHO_CMD} WITHOUT_$${i}=true >> $${TMPOPTIONSFILE}; \ - fi; \ - done; \ - if [ `${ID} -u` != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \ - ${ECHO_MSG} "===> Switching to root credentials to write ${_OPTIONSFILE}"; \ - ${SU_CMD} "${CAT} $${TMPOPTIONSFILE} > ${_OPTIONSFILE}"; \ - ${ECHO_MSG} "===> Returning to user credentials"; \ - else \ - ${CAT} $${TMPOPTIONSFILE} > ${_OPTIONSFILE}; \ - fi; \ - ${RM} -f $${TMPOPTIONSFILE} -.endif -.endif - -.if !target(config-recursive) -config-recursive: - @${ECHO_MSG} "===> Setting user-specified options for ${PKGNAME} and dependencies"; - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} config-conditional); \ - done -.endif - -.if !target(config-conditional) -config-conditional: -.if defined(OPTIONS) -.if exists(${_OPTIONSFILE}) -# scan saved options and invalidate them, if the set of options does not match - @. ${_OPTIONSFILE}; \ - set ${OPTIONS} XXX; \ - while [ $$# -gt 3 ]; do \ - withvar=WITH_$$1; \ - withoutvar=WITHOUT_$$1; \ - withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \ - withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \ - if [ ! -z "$${withval}" ]; then \ - val=on; \ - elif [ ! -z "$${withoutval}" ]; then \ - val=off; \ - else \ - val=missing; \ - fi; \ - if [ "$${val}" = "missing" ]; then \ - OPTIONS_INVALID=yes; \ - fi; \ - shift 3; \ - done; \ - if [ "$${OPTIONS_INVALID}" = "yes" ]; then \ - cd ${.CURDIR} && ${MAKE} config; \ - fi; -.else - cd ${.CURDIR} && ${MAKE} config; -.endif -.endif -.endif - -.if !target(showconfig) -showconfig: -.if defined(OPTIONS) - @${ECHO_MSG} "===> The following configuration options are available for ${PKGNAME}:" - -@if [ -e ${_OPTIONSFILE} ]; then \ - . ${_OPTIONSFILE}; \ - fi; \ - set -- ${OPTIONS} XXX; \ - while [ $$# -gt 3 ]; do \ - defaultval=$$3; \ - withvar=WITH_$$1; \ - withoutvar=WITHOUT_$$1; \ - withval=$$(eval ${ECHO_CMD} $$\{$${withvar}\}); \ - withoutval=$$(eval ${ECHO_CMD} $$\{$${withoutvar}\}); \ - if [ ! -z "$${withval}" ]; then \ - val=on; \ - elif [ ! -z "$${withoutval}" ]; then \ - val=off; \ - else \ - val="$$3 (default)"; \ - fi; \ - ${ECHO_MSG} " $$1=$${val} \"$$2\""; \ - shift 3; \ - done - @${ECHO_MSG} "===> Use 'make config' to modify these settings" -.endif -.endif - -.if !target(rmconfig) -rmconfig: -.if defined(OPTIONS) && exists(${_OPTIONSFILE}) - -@${ECHO_MSG} "===> Removing user-configured options for ${PKGNAME}"; \ - if [ `${ID} -u` != 0 -a "x${INSTALL_AS_USER}" = "x" ]; then \ - ${ECHO_MSG} "===> Switching to root credentials to remove ${_OPTIONSFILE} and `${DIRNAME} ${_OPTIONSFILE}`"; \ - ${SU_CMD} "${RM} -f ${_OPTIONSFILE} ; \ - ${RMDIR} `${DIRNAME} ${_OPTIONSFILE}`"; \ - ${ECHO_MSG} "===> Returning to user credentials"; \ - else \ - ${RM} -f ${_OPTIONSFILE}; \ - ${RMDIR} `${DIRNAME} ${_OPTIONSFILE}`; \ - fi -.else - @${ECHO_MSG} "===> No user-specified options configured for ${PKGNAME}" -.endif -.endif - -.if !target(rmconfig-recursive) -rmconfig-recursive: - @${ECHO_MSG} "===> Removing user-specified options for ${PKGNAME} and dependencies"; - @for dir in ${.CURDIR} $$(${ALL-DEPENDS-LIST}); do \ - (cd $$dir; ${MAKE} rmconfig); \ - done -.endif - -desktop-categories: - @categories=""; \ - for native_category in ${CATEGORIES}; do \ - c=""; \ - case $$native_category in \ - accessibility) c="Accessibility Utility" ;; \ - archivers) c="Archiving" ;; \ - astro) c="Astronomy Science Education" ;; \ - audio) c="Audio AudioVideo" ;; \ - benchmarks) c="System" ;; \ - biology) c="Biology Science Education" ;; \ - cad) c="Engineering" ;; \ - databases) c="Database" ;; \ - deskutils) c="Utility" ;; \ - devel) c="Development" ;; \ - dns) c="Network" ;; \ - elisp) c="Development" ;; \ - emulators) c="Emulator" ;; \ - finance) c="Finance Office" ;; \ - ftp) c="FileTransfer Network" ;; \ - games) c="Game" ;; \ - gnome) c="GNOME GTK" ;; \ - graphics) c="Graphics" ;; \ - hamradio) c="HamRadio" ;; \ - haskell) c="Development" ;; \ - ipv6) c="Network" ;; \ - irc) c="IRCClient Network" ;; \ - java) c="Java Development" ;; \ - kde) c="KDE QT" ;; \ - lang) c="Development" ;; \ - lisp) c="Development" ;; \ - mail) c="Email Office Network" ;; \ - mbone) c="Network AudioVideo" ;; \ - multimedia) c="AudioVideo" ;; \ - net) c="Network" ;; \ - net-im) c="InstantMessaging Network" ;; \ - net-mgmt) c="Network" ;; \ - net-p2p) c="P2P Network" ;; \ - news) c="News" ;; \ - pear) c="WebDevelopment Development" ;; \ - perl5) c="Development" ;; \ - python) c="Development" ;; \ - ruby) c="Development" ;; \ - rubygems) c="Development" ;; \ - scheme) c="Development" ;; \ - science) c="Science Education" ;; \ - security) c="Security System" ;; \ - shells) c="Shell" ;; \ - sysutils) c="System Utility" ;; \ - tcl*|tk*) c="Development" ;; \ - www) c="Network" ;; \ - x11-clocks) c="Clock Utility" ;; \ - x11-fm) c="FileManager" ;; \ - xfce) c="GTK" ;; \ - zope) c="WebDevelopment Development" ;; \ - esac; \ - if [ -n "$$c" ]; then \ - categories="$$categories $$c"; \ - fi; \ - done; \ - if [ -n "$$categories" ]; then \ - for c in Application $$categories; do ${ECHO_MSG} "$$c"; done \ - | ${SORT} -u | ${TR} '\n' ';'; \ - ${ECHO_MSG}; \ - fi - -VALID_DESKTOP_CATEGORIES+= Application Core Development Building Debugger IDE \ - GUIDesigner Profiling RevisionControl Translation Office Calendar \ - ContactManagement Database Dictionary Chart Email Finance FlowChart PDA \ - ProjectManagement Presentation Spreadsheet WordProcessor Graphics \ - 2DGraphics VectorGraphics RasterGraphics 3DGraphics Scanning OCR \ - Photography Viewer Settings DesktopSettings HardwareSettings \ - PackageManager Network Dialup InstantMessaging IRCClient FileTransfer \ - HamRadio News P2P RemoteAccess Telephony WebBrowser WebDevelopment \ - AudioVideo Audio Midi Mixer Sequencer Tuner Video TV AudioVideoEditing \ - Player Recorder DiscBurning Game ActionGame AdventureGame ArcadeGame \ - BoardGame BlocksGame CardGame KidsGame LogicGame RolePlaying Simulation \ - SportsGame StrategyGame Education Art Construction Music Languages \ - Science Astronomy Biology Chemistry Geology Math MedicalSoftware Physics \ - Teaching Amusement Applet Archiving Electronics Emulator Engineering \ - FileManager Shell Screensaver TerminalEmulator TrayIcon System Filesystem \ - Monitor Security Utility Accessibility Calculator Clock TextEditor KDE \ - GNOME GTK Qt Motif Java ConsoleOnly AdvancedSettings - -check-desktop-entries: -.if defined(DESKTOP_ENTRIES) - @set -- ${DESKTOP_ENTRIES} XXX; \ - if [ `${EXPR} \( $$# - 1 \) % 6` -ne 0 ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: the DESKTOP_ENTRIES list must contain one or more groups of 6 elements"; \ - exit 1; \ - fi; \ - num=1; \ - while [ $$# -gt 6 ]; do \ - entry="#$$num"; \ - if [ -n "$$4" ]; then \ - entry="$$entry ($$4)"; \ - elif [ -n "$$1" ]; then \ - entry="$$entry ($$1)"; \ - fi; \ - if [ -z "$$1" ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 1 (Name) is empty"; \ - exit 1; \ - fi; \ - if [ -z "$$4" ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 4 (Exec) is empty"; \ - exit 1; \ - fi; \ - if [ -n "$$5" ]; then \ - for c in `${ECHO_CMD} "$$5" | ${TR} ';' ' '`; do \ - if ! ${ECHO_CMD} ${VALID_DESKTOP_CATEGORIES} | ${GREP} -wq $$c; then \ - ${ECHO_CMD} "${PKGNAME}: Makefile error: in desktop entry $$entry: category $$c is not a valid desktop category"; \ - exit 1; \ - fi; \ - done; \ - if ! ${ECHO_CMD} "$$5" | ${GREP} -q ';$$'; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) does not end with a semicolon"; \ - exit 1; \ - fi; \ - else \ - if [ -z "`cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} desktop-categories`" ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 5 (Categories) is empty and could not be deduced from the CATEGORIES variable"; \ - exit 1; \ - fi; \ - fi; \ - if [ -z "$$6" ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is empty"; \ - exit 1; \ - fi; \ - if [ "x$$6" != "xtrue" ] && [ "x$$6" != "xfalse" ]; then \ - ${ECHO_MSG} "${PKGNAME}: Makefile error: in desktop entry $$entry: field 6 (StartupNotify) is not \"true\" or \"false\""; \ - exit 1; \ - fi; \ - shift 6; \ - num=`${EXPR} $$num + 1`; \ - done -.else - @${DO_NADA} -.endif - -.if !target(install-desktop-entries) -install-desktop-entries: -.if defined(DESKTOP_ENTRIES) - @(${MKDIR} "${DESKTOPDIR}" 2> /dev/null) || \ - (${ECHO_MSG} "===> Cannot create ${DESKTOPDIR}, check permissions"; exit 1) - @set -- ${DESKTOP_ENTRIES} XXX; \ - if [ -z "${_DESKTOPDIR_REL}" ]; then \ - ${ECHO_CMD} "@cwd ${DESKTOPDIR}" >> ${TMPPLIST}; \ - fi; \ - while [ $$# -gt 6 ]; do \ - filename="$$4.desktop"; \ - pathname="${DESKTOPDIR}/$$filename"; \ - categories="$$5"; \ - if [ -z "$$categories" ]; then \ - categories="`cd ${.CURDIR} && ${MAKE} ${__softMAKEFLAGS} desktop-categories`"; \ - fi; \ - ${ECHO_CMD} "${_DESKTOPDIR_REL}$$filename" >> ${TMPPLIST}; \ - ${ECHO_CMD} "[Desktop Entry]" > $$pathname; \ - ${ECHO_CMD} "Type=Application" >> $$pathname; \ - ${ECHO_CMD} "Version=0.9.4" >> $$pathname; \ - ${ECHO_CMD} "Encoding=UTF-8" >> $$pathname; \ - ${ECHO_CMD} "Name=$$1" >> $$pathname; \ - if [ -n "$$2" ]; then \ - ${ECHO_CMD} "Comment=$$2" >> $$pathname; \ - fi; \ - if [ -n "$$3" ]; then \ - ${ECHO_CMD} "Icon=$$3" >> $$pathname; \ - fi; \ - ${ECHO_CMD} "Exec=$$4" >> $$pathname; \ - ${ECHO_CMD} "Categories=$$categories" >> $$pathname; \ - ${ECHO_CMD} "StartupNotify=$$6" >> $$pathname; \ - shift 6; \ - done; \ - ${ECHO_CMD} "@unexec rmdir ${DESKTOPDIR} 2>/dev/null || true" >> ${TMPPLIST}; \ - if [ -z "${_DESKTOPDIR_REL}" ]; then \ - ${ECHO_CMD} "@cwd ${PREFIX}" >> ${TMPPLIST}; \ - fi -.else - @${DO_NADA} -.endif -.endif - -.endif -# End of post-makefile section. - -.endif -# End of the DESTDIR if statement |