aboutsummaryrefslogtreecommitdiffstats
path: root/calendar/gui/calendar-pilot-sync.c
diff options
context:
space:
mode:
Diffstat (limited to 'calendar/gui/calendar-pilot-sync.c')
-rw-r--r--calendar/gui/calendar-pilot-sync.c815
1 files changed, 0 insertions, 815 deletions
diff --git a/calendar/gui/calendar-pilot-sync.c b/calendar/gui/calendar-pilot-sync.c
deleted file mode 100644
index d9f44c14cb..0000000000
--- a/calendar/gui/calendar-pilot-sync.c
+++ /dev/null
@@ -1,815 +0,0 @@
-/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8 -*- */
-/*
- * calendar-pilot-sync.c:
- *
- * (C) 1999 International GNOME Support
- *
- * Author:
- * Miguel de Icaza (miguel@gnome-support.com)
- *
- */
-
-
-/*
- *
- * this only works in a monogamous pilot/desktop situation.
- *
- */
-
-
-
-#include <config.h>
-#include <gnome.h>
-#include <stdio.h>
-#include <stdlib.h>
-#include <string.h>
-#include <bonobo.h>
-#include <bonobo/bonobo-control.h>
-
-#ifdef USING_OAF
-#include <liboaf/liboaf.h>
-#else
-#include <libgnorba/gnorba.h>
-#endif
-
-#include <cal-client/cal-client.h>
-#include "cal-util/calobj.h"
-#include "cal-util/timeutil.h"
-#include "pi-source.h"
-#include "pi-socket.h"
-#include "pi-datebook.h"
-#include "pi-dlp.h"
-
-
-char *calendar_file;
-
-/* The default port to communicate with */
-char *pilot_port = "/dev/pilot";
-
-/* Our pi-socket address where we connect to */
-struct pi_sockaddr addr;
-
-/* The Pilot DB identifier for DateBook */
-int db;
-
-/* If true, enable debug output for alarms */
-int debug_alarms = 0;
-
-/* True if you want to dump the flags bits from the records */
-int debug_attrs = 0;
-
-int only_desktop_to_pilot = 0;
-
-int only_pilot_to_desktop = 0;
-
-
-const struct poptOption calendar_sync_options [] = {
- { "pilot", 0, POPT_ARG_STRING, &pilot_port, 0,
- N_("Specifies the port on which the Pilot is"), N_("PORT") },
- { "debug-attrs", 0, POPT_ARG_NONE, &debug_attrs, 0,
- N_("If you want to debug the attributes on records"), NULL },
- { "only-desktop", 0, POPT_ARG_NONE, &only_desktop_to_pilot, 0,
- N_("Only syncs from desktop to pilot"), NULL },
- { "only-pilot", 0, POPT_ARG_INT, &only_pilot_to_desktop, 0,
- N_("Only syncs from pilot to desktop"), NULL },
- { NULL, '\0', 0, NULL, 0 }
-};
-
-static void
-conduit_free_Appointment (struct Appointment *a)
-{
- /* free_Appointment is brain-dead with respect to guarding against
- double-frees */
-
- free_Appointment (a);
- a->exception = 0;
- a->description = 0;
- a->note = 0;
-}
-
-static int
-setup_connection (void)
-{
- int socket;
- int ret, news;
-
- if (!(socket = pi_socket(PI_AF_SLP, PI_SOCK_STREAM, PI_PF_PADP)))
- g_error (_("Can not create Pilot socket\n"));
-
- addr.pi_family = PI_AF_SLP;
- strncpy ((void *)&addr.pi_device, pilot_port, sizeof (addr.pi_device));
-
- ret = pi_bind (socket, (struct sockaddr *)&addr, sizeof (addr));
- if (ret == -1)
- g_error (_("Can not bind to device %s\n"), pilot_port);
-
- if (pi_listen (socket, 1) == -1)
- g_error (_("Failed to get a connection "
- "from the Pilot device"));
-
- if ((news = pi_accept (socket, 0, 0)) == -1)
- g_error (_("pi_accept failed"));
-
- return news;
-}
-
-
-static void
-init_bonobo (int *argc, char **argv)
-{
-# ifdef USING_OAF
- /* FIXME: VERSION instead of "0.0". */
- gnome_init_with_popt_table ("evolution-calendar", "0.0",
- *argc, argv, oaf_popt_options,
- 0, NULL);
- oaf_init (*argc, argv);
-# else
- CORBA_Environment ev;
-
- CORBA_exception_init (&ev);
- gnome_CORBA_init_with_popt_table (
- "evolution-calendar", "0.0",
- argc, argv, NULL, 0, NULL, GNORBA_INIT_SERVER_FUNC, &ev);
- CORBA_exception_free (&ev);
-# endif
-
- if (bonobo_init (CORBA_OBJECT_NIL,
- CORBA_OBJECT_NIL, CORBA_OBJECT_NIL) == FALSE)
- g_error (_("Could not initialize Bonobo"));
-}
-
-
-static void
-delete_record_from_desktop (CalClient *client, int id)
-{
- char *uid;
- CalClientGetStatus status;
-
- status = cal_client_get_uid_by_pilot_id (client, id, &uid);
-
- if (status == CAL_CLIENT_GET_SUCCESS) {
- cal_client_remove_object (client, uid);
- g_free (uid);
- }
-}
-
-
-
-static void
-dump_attr (int flags)
-{
- if (flags & dlpRecAttrDeleted)
- printf (" Deleted");
- if (flags & dlpRecAttrDirty)
- printf (" Dirty");
- if (flags & dlpRecAttrBusy)
- printf (" Busy");
- if (flags & dlpRecAttrSecret)
- printf (" Secret");
- if (flags & dlpRecAttrArchived)
- printf (" Archive");
- printf ("\n");
-}
-
-
-
-/* take a record retrieved from a pilot and merge it into the desktop cal */
-
-static void
-update_record (CalClient *client, int id, struct Appointment *a, int attr)
-{
- iCalObject *obj;
- int i;
- CalClientGetStatus status;
- char *uid = NULL;
- gboolean success;
-
- printf ("pilot->cal: %d, ", id);
-
- status = cal_client_get_uid_by_pilot_id (client, id, &uid);
- if (status == CAL_CLIENT_GET_SUCCESS)
- status = cal_client_get_object (client, uid, &obj);
-
- if (status != CAL_CLIENT_GET_SUCCESS) {
- /* Object did not exist, creating a new one */
- time_t now = time (NULL);
-
- obj = ical_new (a->note ? a->note : "",
- g_get_user_name (),
- a->description ? a->description : "");
-
- obj->created = now;
- obj->last_mod = now;
- obj->priority = 0;
- obj->transp = 0;
- obj->related = NULL;
- obj->pilot_id = id;
- obj->pilot_status = ICAL_PILOT_SYNC_NONE;
- }
-
- if (obj->pilot_status == ICAL_PILOT_SYNC_MOD) {
- printf (_("\tObject has been modified on desktop and on "
- "the pilot, desktop takes precedence\n"));
- ical_object_unref (obj);
- return;
- }
-
- /*
- * Begin and end
- */
-
- if (a->event)
- {
- /* turn day-long events into a full day's appointment */
- a->begin.tm_sec = 0;
- a->begin.tm_min = 0;
- a->begin.tm_hour = 6;
-
- a->end.tm_sec = 0;
- a->end.tm_min = 0;
- a->end.tm_hour = 10;
- }
-
- if (a->note)
- obj->comment = g_strdup (a->note);
-
- if (a->description)
- obj->summary = g_strdup (a->description);
-
-
- obj->dtstart = mktime (&a->begin);
- obj->dtend = mktime (&a->end);
-
- /* Special case: daily repetitions are converted to a multiday event */
- if (a->repeatType == repeatDaily){
- time_t newt = time_add_day (obj->dtend, a->repeatFrequency);
-
- obj->dtend = newt;
- }
-
- /*
- * Alarm
- */
- if (a->alarm){
- obj->aalarm.type = ALARM_AUDIO;
- obj->aalarm.enabled = 1;
- obj->aalarm.count = a->advance;
-
- switch (a->advanceUnits){
- case advMinutes:
- obj->aalarm.units = ALARM_MINUTES;
- break;
-
- case advHours:
- obj->aalarm.units = ALARM_HOURS;
- break;
-
- case advDays:
- obj->aalarm.units = ALARM_DAYS;
- break;
- default:
- }
- }
-
- /*
- * Recurrence
- */
- if (a->repeatFrequency && a->repeatType != repeatDaily){
- obj->recur = g_new0 (Recurrence, 1);
-
- switch (a->repeatType){
- case repeatDaily:
- /*
- * In the Pilot daily repetitions are actually
- * multi-day events
- */
- g_warning ("Should not have got here");
- break;
-
- case repeatMonthlyByDate:
- obj->recur->type = RECUR_MONTHLY_BY_DAY;
- obj->recur->u.month_day = a->repeatFrequency;
- break;
-
- case repeatWeekly:
- {
- int wd;
-
- obj->recur->type = RECUR_WEEKLY;
- for (wd = 0; wd < 7; wd++)
- if (a->repeatDays [wd])
- obj->recur->weekday |= 1 << wd;
-
- if (obj->recur->weekday == 0){
- struct tm tm = *localtime (&obj->dtstart);
-
- obj->recur->weekday = 1 << tm.tm_wday;
- }
- break;
- }
-
- case repeatMonthlyByDay:
- obj->recur->type = RECUR_MONTHLY_BY_POS;
- obj->recur->u.month_pos = a->repeatFrequency;
- obj->recur->weekday = (a->repeatDay / 7);
- break;
-
- case repeatYearly:
- obj->recur->type = RECUR_YEARLY_BY_DAY;
- break;
-
- default:
- g_warning ("Unhandled repeate case");
- }
-
- if (a->repeatForever)
- obj->recur->duration = 0;
- else
- obj->recur->_enddate = mktime (&a->repeatEnd);
- }
-
- /*
- * Load exception dates
- */
- obj->exdate = NULL;
- for (i = 0; i < a->exceptions; i++){
- time_t *t = g_new (time_t, 1);
-
- *t = mktime (&(a->exception [i]));
- obj->exdate = g_list_prepend (obj->exdate, t);
- }
-
- g_free (obj->class);
-
- if (attr & dlpRecAttrSecret)
- obj->class = g_strdup ("PRIVATE");
- else
- obj->class = g_strdup ("PUBLIC");
-
- /*
- * Now, convert the in memory iCalObject to a full vCalendar
- * we can send
- */
- success = cal_client_update_object (client, obj);
- /* set the pilot_status to sync_none so we don't send
- this event right back to the pilot */
- cal_client_update_pilot_id (client, obj->uid, obj->pilot_id,
- ICAL_PILOT_SYNC_NONE);
-
-
- dump_attr (attr);
- printf (" but not used.\n");
-
- /*
- * Shutdown
- */
- ical_object_unref (obj);
-}
-
-/*
- * Sets the alarm for Appointment based on @alarm
- */
-static int
-try_alarm (CalendarAlarm *alarm, struct Appointment *a)
-{
- if (!alarm->enabled)
- return 0;
-
- a->advance = alarm->count;
- switch (alarm->type){
- case ALARM_DAYS:
- a->advanceUnits = advDays;
- break;
-
- case ALARM_HOURS:
- a->advanceUnits = advHours;
- break;
-
- case ALARM_MINUTES:
- a->advanceUnits = advMinutes;
- break;
-
- default:
- return 0;
- }
- a->alarm = 1;
- return 1;
-}
-
-
-static void
-sync_object_to_pilot (CalClient *client, iCalObject *obj, int pilot_fd)
-{
- char buffer [65536];
- struct Appointment *a;
- int wd, i, idx, attr, cat, rec_len;
- recordid_t new_id;
- GList *l;
-
- a = g_new0 (struct Appointment, 1);
-
- attr = 0;
- cat = 0;
- idx = 0;
-
- printf ("cal->pilot: pilotid=%d, ", obj->pilot_id);
-
- if (obj->pilot_id) {
- rec_len = dlp_ReadRecordById (pilot_fd, db, obj->pilot_id,
- buffer,
- &idx, &rec_len, &attr, &cat);
-
- if (rec_len > 0)
- unpack_Appointment (a, buffer, rec_len);
- } else {
- attr = 0;
- cat = 0;
- }
-
- /* a contains the appointment either cleared or with
- the data from the Pilot */
- a->begin = *localtime (&obj->dtstart);
- a->end = *localtime (&obj->dtend);
-
- /* FIXME: add support for timeless */
- a->event = 0;
-
- /* Alarms, try the various ones. Probably we should only do Audio?
- * Otherwise going gnomecal->pilot->gnomecal would get the gnomecal
- * with *possibly* an alarm that was not originally defined.
- */
- a->alarm = 0;
- if (try_alarm (&obj->aalarm, a) == 0)
- if (try_alarm (&obj->dalarm, a) == 0)
- try_alarm (&obj->palarm, a);
-
- /* Recurrence */
- if (obj->recur){
- a->repeatFrequency = obj->recur->interval;
-
- switch (obj->recur->type){
- case RECUR_MONTHLY_BY_POS:
- a->repeatType = repeatMonthlyByDay;
- a->repeatFrequency = obj->recur->u.month_pos;
- a->repeatDay = obj->recur->weekday * 7;
- break;
-
- case RECUR_MONTHLY_BY_DAY:
- a->repeatType = repeatMonthlyByDate;
- a->repeatFrequency = obj->recur->u.month_day;
- break;
-
- case RECUR_YEARLY_BY_DAY:
- a->repeatType = repeatYearly;
- break;
-
- case RECUR_WEEKLY:
- for (wd = 0; wd < 7; wd++)
- if (obj->recur->weekday & (1 << wd))
- a->repeatDays [wd] = 1;
- a->repeatType = repeatWeekly;
- break;
- case RECUR_DAILY:
-
- default:
- a->repeatType = repeatNone;
- break;
- }
- if (obj->recur->enddate == 0){
- a->repeatForever = 1;
- } else
- a->repeatEnd = *localtime (&obj->recur->enddate);
- }
-
- /*
- * Pilot uses a repeat-daily for a multi-day event, adjust
- * for that case
- */
- if ((a->end.tm_mday != a->begin.tm_mday) ||
- (a->end.tm_mon != a->begin.tm_mon) ||
- (a->end.tm_year != a->begin.tm_year)) {
- a->event = 1;
- a->begin.tm_sec = 0;
- a->begin.tm_min = 0;
- a->begin.tm_hour = 0;
-
- a->end.tm_sec = 0;
- a->end.tm_min = 0;
- a->end.tm_hour = 0;
-
- a->repeatEnd = a->end;
- a->repeatForever = 0;
- a->repeatFrequency = 1;
- a->repeatType = repeatDaily;
- }
-
- /*
- * Exceptions
- */
- a->exceptions = g_list_length (obj->exdate);
- a->exception = (struct tm *)malloc (sizeof(struct tm) * a->exceptions);
- for (i = 0, l = obj->exdate; l; l = l->next, i++){
- time_t *exdate = l->data;
-
- a->exception [i] = *localtime (exdate);
- }
-
- /*
- * Description and note.
- *
- * We use strdup to be correct. free_Appointment assumes we used
- * malloc.
- */
- if (obj->comment)
- a->note = strdup (obj->comment);
- else
- a->note = 0;
-
- if (obj->summary)
- a->description = strdup (obj->summary);
- else
- a->description = strdup (_("No description"));
-
- if (strcmp (obj->class, "PUBLIC") != 0)
- attr |= dlpRecAttrSecret;
- else
- attr &= ~dlpRecAttrSecret;
-
- /*
- * Send the appointment to the pilot
- */
- rec_len = pack_Appointment (a, buffer, sizeof (buffer));
- attr &= ~dlpRecAttrDirty;
-
- dump_attr (attr);
- printf ("\n");
-
- dlp_WriteRecord (pilot_fd, db, attr,
- obj->pilot_id, 0, buffer, rec_len, &new_id);
-
- cal_client_update_pilot_id (client, obj->uid, new_id,
- ICAL_PILOT_SYNC_NONE);
-
-
- conduit_free_Appointment (a);
- g_free (a);
-}
-
-static void
-sync_cal_to_pilot (CalClient *client, int pilot_fd)
-{
- int c;
- int i;
- GList *uids;
- GList *cur;
-
-
- uids = cal_client_get_uids (client, CALOBJ_TYPE_ANY);
-
- c = g_list_length (uids);
-
-
- for (cur=uids, i=0; cur; cur=cur->next, i++) {
- const char *uid = cur->data;
- CalClientGetStatus status;
- iCalObject *ico;
-
- status = cal_client_get_object (client, uid, &ico);
- if (status == CAL_CLIENT_GET_SUCCESS &&
- ico->pilot_status == ICAL_PILOT_SYNC_MOD) {
- printf ("uid='%s', pilot_status=%d\n", uid,
- ico->pilot_status);
- sync_object_to_pilot (client, ico, pilot_fd);
- }
- /*
- else {
- warn
- }
- */
- }
-}
-
-
-static void
-sync_pilot_to_cal (CalClient *client, int pilot_fd)
-{
- int record;
- unsigned char buffer [65536];
-
- for (record = 0;; record++) {
- struct Appointment a;
- int rec_len, attr, size;
- recordid_t id;
-
- rec_len = dlp_ReadRecordByIndex (pilot_fd, db,
- record, buffer,
- &id, &size, &attr, 0);
- if (rec_len < 0)
- break;
-
- unpack_Appointment (&a, buffer, rec_len);
-
- if (debug_attrs)
- dump_attr (attr);
-
- /* If the object was deleted, remove it from
- the desktop database */
- if (attr & dlpRecAttrDeleted) {
- delete_record_from_desktop (client, id);
- conduit_free_Appointment (&a);
- dlp_DeleteRecord (pilot_fd, db, 0, id);
- continue;
- }
-
- if (attr & dlpRecAttrArchived)
- continue;
-
- if (attr & dlpRecAttrDirty) {
- update_record (client, id, &a, attr);
- } else {
- /* if the dirty flag is clear yet we have
- no copy of it in the desktop database, then
- we deleted it from the desktop database, so
- delete it from the pilot */
-
- char *uid;
- CalClientGetStatus status;
- status = cal_client_get_uid_by_pilot_id (client,
- id, &uid);
- if (status == CAL_CLIENT_GET_NOT_FOUND) {
- printf ("deleting %ld from pilot\n", id);
- dlp_DeleteRecord (pilot_fd, db, 0, id);
- }
- else
- g_free (uid);
- }
-
- attr &= ~dlpRecAttrDirty;
-
- conduit_free_Appointment (&a);
- }
-}
-
-
-static void
-sync_pilot (CalClient *client, int pilot_fd)
-{
- struct PilotUser user_info;
- struct SysInfo sys_info;
- unsigned char buffer [300];
-
-
- /* Get the pilot's system information. FIX ME check return */
- dlp_ReadSysInfo (pilot_fd, &sys_info);
-
- /* Ask the pilot who it is. FIX ME check return */
- dlp_ReadUserInfo (pilot_fd, &user_info);
-
-
- printf ("---------sys info--------------\n");
- printf ("romVersion=%ld\n", sys_info.romVersion);
- printf ("locale=%ld\n", sys_info.locale);
- strncpy (buffer, sys_info.name, sys_info.nameLength);
- printf ("name='%s'\n", buffer);
- printf ("---------user info--------------\n");
- printf ("userID=%ld\n", user_info.userID);
- printf ("viewerID=%ld\n", user_info.viewerID);
- printf ("lastSyncPC=%ld\n", user_info.lastSyncPC);
- printf ("successfulSyncDate=%s",
- ctime (& user_info.successfulSyncDate));
- printf ("lastSyncDate=%s",
- ctime (& user_info.lastSyncDate));
- printf ("username='%s'\n", user_info.username);
- strncpy (buffer, user_info.password, user_info.passwordLength);
- printf ("password='%s'\n", buffer);
- printf ("--------------------------------\n");
-
-
- /* This informs the user of the progress on the Pilot */
- dlp_OpenConduit (pilot_fd);
-
- if (dlp_OpenDB (pilot_fd, 0, 0x80 | 0x40, "DatebookDB", &db) < 0){
- g_warning (_("Could not open DatebookDB on the Pilot"));
- dlp_AddSyncLogEntry (pilot_fd, _("Unable to open DatebookDB"));
- pi_close (pilot_fd);
- exit (1);
- }
-
- /*
- * 1. Pull all the records from the Pilot, and make any updates
- * required on the desktop side
- */
- if (! only_desktop_to_pilot)
- sync_pilot_to_cal (client, pilot_fd);
-
-
- /*
- * 2. Push all changes on the desktop to the pilot.
- *
- */
-
- if (! only_pilot_to_desktop)
- sync_cal_to_pilot (client, pilot_fd);
-
- /*
- * 3. Clear the dirty bits on all the pilot's events.
- *
- */
-
- dlp_ResetSyncFlags (pilot_fd, db);
-
- /*
- * 4. Close down.
- *
- */
-
- dlp_CloseDB (pilot_fd, db);
- dlp_AddSyncLogEntry (pilot_fd,
- _("Synced DateBook from Pilot to GnomeCal"));
- pi_close (pilot_fd);
-
- /*
- * 5. Dump Core.
- *
- */
-}
-
-
-static void
-gnome_calendar_load_cb (GtkWidget *cal_client,
- CalClientLoadStatus status,
- int *link)
-{
- CalClient *client = CAL_CLIENT (cal_client);
- static int tried = 0;
-
- if (status == CAL_CLIENT_LOAD_SUCCESS) {
- printf ("<Syncing>\n");
- sync_pilot (client, *link);
- printf ("</Syncing>\n");
- }
- else {
- if (tried) {
- printf ("load and create of calendar failed\n");
- return;
- }
-
- cal_client_create_calendar (client, calendar_file);
- tried = 1;
- }
-
- gtk_main_quit ();
-}
-
-
-int
-main (int argc, char *argv [])
-{
- int link;
- CalClient *client;
-
- init_bonobo (&argc, argv);
-
- g_log_set_always_fatal (G_LOG_LEVEL_ERROR |
- G_LOG_LEVEL_CRITICAL |
- G_LOG_LEVEL_WARNING);
-
-
- /* FIX ME */
- calendar_file = g_concat_dir_and_file (g_get_home_dir (),
- "evolution/local/Calendar/calendar.vcf");
-
-
- for (;;) {
- printf ("Please, press HotSync button on the palm...\n");
- fflush (stdout);
- link = setup_connection ();
- printf ("Connected\n");
-
- printf ("Contacting calendar server...\n");
- fflush (stdout);
- client = cal_client_new ();
-
- gtk_signal_connect (GTK_OBJECT (client), "cal_loaded",
- gnome_calendar_load_cb, &link);
-
- cal_client_load_calendar (client, calendar_file);
-
- bonobo_main ();
-
- gtk_object_unref (GTK_OBJECT (client));
- pi_close (link);
- }
-
- return 0;
-}
-
-/* Just a stub to link with */
-
-void calendar_notify (time_t time, CalendarAlarm *which, void *data);
-
-void
-calendar_notify (time_t time, CalendarAlarm *which, void *data)
-{
-}
-
generated by cgit v1.2.3 (git 2.25.1) at 2025-01-12 08:38:30 +0800