diff options
author | nobody <nobody@localhost> | 2001-08-02 23:43:54 +0800 |
---|---|---|
committer | nobody <nobody@localhost> | 2001-08-02 23:43:54 +0800 |
commit | 7acab8b24cd9e7e2e32211e77d2a5c2eae1c4bb0 (patch) | |
tree | 94acb43d14c571e8ec432fa3650277178741f531 /libical/doc/UsingLibical.txt | |
parent | ea4315435238149d387701ed2940bf8c97d4d319 (diff) | |
download | gsoc2013-evolution-release-0-2-91.tar gsoc2013-evolution-release-0-2-91.tar.gz gsoc2013-evolution-release-0-2-91.tar.bz2 gsoc2013-evolution-release-0-2-91.tar.lz gsoc2013-evolution-release-0-2-91.tar.xz gsoc2013-evolution-release-0-2-91.tar.zst gsoc2013-evolution-release-0-2-91.zip |
This commit was manufactured by cvs2svn to create tagrelease-0-2-91
'release-0-2-91'.
svn path=/tags/release-0-2-91/; revision=11578
Diffstat (limited to 'libical/doc/UsingLibical.txt')
-rw-r--r-- | libical/doc/UsingLibical.txt | 1384 |
1 files changed, 0 insertions, 1384 deletions
diff --git a/libical/doc/UsingLibical.txt b/libical/doc/UsingLibical.txt deleted file mode 100644 index 6b203d43d2..0000000000 --- a/libical/doc/UsingLibical.txt +++ /dev/null @@ -1,1384 +0,0 @@ - - -Using Libical - -Eric Busboom (eric@softwarestudio.org) - -January 2001 - - - -1 Introduction - -Libical is an Open Source implementation of the iCalendar protocols -and protocol data units. The iCalendar specification describes how -calendar clients can communicate with calendar servers so users can -store their calendar data and arrange meetings with other users. - -Libical implements RFC2445, RFC2446 and some of RFC2447 and the CAP -draft. - -This documentation assumes that you are familiar with the iCalendar -standards RFC2445 and RFC2446. these specifications are online on -the CALSCH webpage at: - -http://www.imc.org/ietf-calendar/ - -1.1 The libical project - -This code is under active development. If you would like to contribute -to the project, you can contact me, Eric Busboom, at eric@softwarestudio.org. -The project has a webpage at - -http://softwarestudio.org/libical/index.html - -and a mailing list that you can join by sending the following mail: - -To: minimalist@softwarestudio.org - -Subject: subscribe libical - -1.2 License - -The code and datafiles in this distribution are licensed under the -Mozilla Public License. See http://www.mozilla.org/NPL/MPL-1.0.html -for a copy of the license. Alternately, you may use libical under -the terms of the GNU Library General Public License. See http://www.fsf.org/copyleft/lesser.html -for a copy of the LGPL. - -This dual license ensures that the library can be incorporated into -both proprietary code and GPL'd programs, and will benefit from improvements -made by programmers in both realms. I will only accept changes into -my version of the library if they are similarly dual-licensed. - -1.3 Example Code - -A lot of the documentation for this library is in the form of example -code. These examples are in the "examples" directory of the distribution. -Also look in "src/test" for additional annotated examples. - -2 Building the Library - -Libical uses autoconf to generate makefiles. It should built with no -adjustments on Linux, FreeBSD and Solaris under gcc. Some version -have been successfully been build on MacOS, Solaris, UnixWare, And -Tru64 UNIX without gcc, but you may run into problems with a particular -later version. - -For a more complete guide to building the library, see the README file -in the distribution. - -3 Structure - -The iCal calendar model is based on four types of objects: components, -properties, values and parameters. - -Properties are the fundamental unit of information in iCal, and they -work a bit like a hash entry, with a constant key and a variable value. -Properties may also have modifiers, called parameters. In the iCal -content line - -ORGANIZER;ROLE=CHAIR:MAILTO:mrbig@host.com - -The property name is "ORGANIZER," the value of the property is "mrbig@host.com" -and the "ROLE" parameter specifies that Mr Big is the chair of the -meetings associated with this property. - -Components are groups of properties that represent the core objects -of a calendar system, such as events or timezones. Components are -delimited by "BEGIN" and "END" tags. - -When a component is sent across a network, if it is un-encrypted, it -will look something like: - -BEGIN:VCALENDAR - -METHOD:REQUEST - -PRODID: -//hacksw/handcal//NONSGML v1.0//EN - -BEGIN:VEVENT - -DTSTAMP:19980309T231000Z - -UID:guid-1.host1.com - -ORGANIZER;ROLE=CHAIR:MAILTO:mrbig@host.com - -ATTENDEE;RSVP=TRUE;ROLE=REQ-PARTICIPANT;CUTYPE=GROUP: - - MAILTO:employee-A@host.com - -DESCRIPTION:Project XYZ Review Meeting - -CATEGORIES:MEETING - -CLASS:PUBLIC - -CREATED:19980309T130000Z - -SUMMARY:XYZ Project Review - -DTSTART;TZID=US-Eastern:19980312T083000 - -DTEND;TZID=US-Eastern:19980312T093000 - -LOCATION:1CP Conference Room 4350 - -END:VEVENT - -END:VCALENDAR - -Note that components can be nested; this example has both a VCALENDAR -and a VEVENT component, one nested inside the other. - -3.1 Core iCal classes - -Libical is an object-based, data-oriented library. Nearly all of the -routines in the library are associated with an opaque data types and -perform some operation on that data type. Although the library does -not actually have classes, we will use those terms since the behavior -of these associations of data and routines is very similar to a class. - -3.1.1 Properties - -Properties are represented with the icalproperty class and its many -"derived" classes with on "derived" class per property type in RFC2445. -Again, there is no actual inheritance relations, but there are clusters -of routines that make this term useful. A property is a container -for a single value and a set of parameters. - -3.1.2 Components - -In libical, components are represented with the icalcomponent class. -Icalcomponent is a container for a set of other components and properties. - -3.1.3 Values - -Values are represented in a similar way to properties; a base class -and many "derived " classes. A value is essentially a abstract handle -on a single fundamental type, a structure or a union. - -3.1.4 Parameters - -Parameters are represetned in a similar way to properties, except that -they contain only one value - -3.2 Other elements of libical - -In addition to the core iCal classes, libical has many other types, -structures, classes that aid in creating and using iCal components. - -3.2.1 Enumerations and types - -Libical is strongly typed, soo every component, property, parameter, -and value type has an enumeration, and some have an associated structure -or union. - -3.2.2 The parser - -The libical parser offers a variety of ways to convert RFC2445 text -into a libical iinsteral component structure. the parser can parse -blocks of text as a string, or it can parse lin-by-line. - -3.2.3 Error objects - -Libical has a substantial error reporting system for both programming -errors and component usage errors. - -3.2.4 Memory Management - -Since many of libicals interfaces return strings, the library has its -own memory management system to elimiate the need to free every string -returned from the libraru. - -3.2.5 Storage classes - -The library also offers several classes to store components to flies, -memory or databases. - -4 Differences From RFCs - -Libical has been designed to follow the standards as closely as possible, -so that the key objects in the standards are also key objects in the -library. However, there are a few areas where the specifications are -(arguably) irregular, and following them exactly would result in an -unfriendly interface. These deviations make libical easier to use -by maintaining a self-similar interface. - -4.1 Pseudo Components - -Libical defines components for groups of properties that look and act -like components, but are not defined as components in the specification. -XDAYLIGHT and XSTANDARD are notable examples. These pseudo components -group properties within the VTIMEZONE components. For instanace, the -timezone properties associated with daylight savings time starts with -"BEGIN:DAYLIGHT" and ends with "END:DAYLIGHT, just like other components, -but is not defined as a component in RFC2445. ( See RFC2445, page -61 ) In Libical,this grouping is represented by the XDAYLIGHT component. -Standard iCAL components all start with the letter "V," while pseudo -components start with"X." - -There are also pseudo components that are conceptually derived classes -of VALARM. RFC2446 defines what properties may be included in each -component, and for VALARM, the set of properties it may have depends -on the value of the ACTION property. - -For instance, if a VALARM component has an ACTION property with the -value of "AUDIO," the component must also have an "ATTACH" property. -However, if the ACTION value is "DISPLAY," the component must have -a DESCRIPTION property. - -To handle these various, complex restrictions, libical has pseudo components -for each type of alarm: XAUDIOALARM, XDISPLAYALARM, XEMAILALARM and -XPROCEDUREALARM. - -4.2 Combined Values - -Many values can take more than one type. TRIGGER, for instance, can -have a value type of with DURATION or of DATE-TIME. These multiple -types make it difficult to create routines to return the value associated -with a property. - -It is natural to have interfaces that would return the value of a property, -but it is cumbersome for a single routine to return multiple types. -So, in libical, properties that can have multiple types are given -a single type that is the union of their RFC2445 types. For instance, -in libical, the value of the TRIGGER property resolves to struct icaltriggertype. -This type is a union of a DURATION and a DATE-TIME. - -4.3 Multi-Valued Properties - -Some properties, such as CATEGORIES have only one value type, but each -CATEGORIES property can have multiple value instances. This also results -in a cumbersome interface -- CATEGORIES accessors would have to return -a list while all other accessors returned a single value. In libical, -all properties have a single value, and multi-valued properties are -broken down into multiple single valued properties during parsing. -That is, an input line like, - -CATEGORIES: work, home - -becomes in libical's internal representation - -CATEGORIES: work - -CATEGORIES: home - -Oddly, RFC2445 allows some multi-valued properties ( like FREEBUSY -) to exist as both a multi-values property and as multiple single -value properties, while others ( like CATEGORIES ) can only exist -as single multi-valued properties. This makes the internal representation -for CATEGORIES illegal. However when you convert a component to a -string, the library will collect all of the CATEGORIES properties -into one. - -5 Using libical - -5.1 Creating Components - -There are three ways to create components in Libical: creating individual -objects and assembling them, building entire objects in massive vaargs -calls, and parsing a text file containing iCalendar data. - -5.1.1 Constructor Interfaces - -Using constructor interfaces, you create each of the objects separately -and then assemble them in to components: - -icalcomponent *event; - -icalproperty *prop; - -icalparameter *param; - -struct icaltimetype atime; - -event = icalcomponent_new(ICAL_VEVENT_COMPONENT); - -prop = icalproperty_new_dtstamp(atime) ; - -icalcomponent_add_property(event, prop); - -prop = icalproperty_new_uid(''guid-1.host1.com'') ); - -icalcomponent_add_property(event,prop); - -prop=icalproperty_new_organizer(''mrbig@host.com''); - -param = icalparameter_new_role(ICAL_ROLE_CHAIR) - -icalproperty_add_parameter(prop, param); - -icalcomponent_add_property(event,prop); - -Notice that libical uses a semi-object-oriented style of interface. -Most things you work with are objects, that are instantiated with -a constructor that has "new" in the name. Also note that, other than -the object reference, most structure data is passed in to libical -routines by value. Libical has some complex but very regular memory -handling rules. These are detailed in section [sec:memory]. - -If any of the constructors fail, they will return 0. If you try to -insert 0 into a property or component, or use a zero-valued object -reference, libical will either silently ignore the error or will abort -with an error message. This behavior is controlled by a compile time -flag (ICAL_ERRORS_ARE_FATAL), and will abort by default. - -5.1.2 vaargs Constructors - -There is another way to create complex components, which is arguably -more elegant, if you are not horrified by varargs. The varargs constructor -interface allows you to create intricate components in a single block -of code. Here is the previous examples in the vaargs style. - - calendar = - - icalcomponent_vanew( - - ICAL_VCALENDAR_COMPONENT, - - icalproperty_new_version(''2.0''), - - icalproperty_new_prodid( - - ''-//RDU Software//NONSGML HandCal//EN''), - - icalcomponent_vanew( - - ICAL_VEVENT_COMPONENT, - - icalproperty_new_dtstamp(atime), - - icalproperty_new_uid(''guid-1.host1.com''), - - icalproperty_vanew_organizer( - - ''mrbig@host.com''), - - icalparameter_new_role(ICAL_ROLE_CHAIR), - - 0 - - ), - - icalproperty_vanew_attendee( - - ''employee-A@host.com'', - - icalparameter_new_role( - - ICAL_ROLE_REQPARTICIPANT), - - icalparameter_new_rsvp(1), - - icalparameter_new_cutype(ICAL_CUTYPE_GROUP), - - 0 - - ), - - icalproperty_new_location( - - "1CP Conference Room 4350"), - - 0 - - ), - - 0 - - ); - -This form is similar to the constructor form , except that the constructors -have "vanew" instead of "new" in the name. The arguments are similar -too, except that the component constructor can have a list of properties, -and the property constructor can have a list of parameters. Be sure -to terminate every list with a '0', or your code will crash, if you -are lucky. - -5.1.3 Parsing Text Files - -The final way to create components will probably be the most common; -you can create components from RFC2445 compliant text. If you have -the string in memory, use - -icalcomponent* icalparser_parse_string(char* str); - -If the string contains only one component, the parser will return the -component in libical form. If the string contains multiple components, -the multiple components will be returned as the children of an ICAL_XROOT_COMPONENT -component. - -Parsing a whole string may seem wasteful if you want to pull a large -component off of the network or from a file; you may prefer to parse -the component line by line. This is possible too by using: - -icalparser* icalparser_new(); - -void icalparser_free(icalparser* parser); - -icalparser_get_line(parser,read_stream); - -icalparser_add_line(parser,line); - -icalparser_set_gen_data(parser,stream) - -These routines will construct a parser object to which you can add -lines of input and retrieve any components that the parser creates -from the input. These routines work by specifing an adaptor routine -to get string data from a source. For an example: - -char* read_stream(char *s, size_t size, void *d) - -{ - - char *c = fgets(s,size, (FILE*)d); - - return c; - -} - -main() { - - char* line; - - icalcomponent *c; - - icalparser *parser = icalparser_new(); - - FILE* stream = fopen(argv[1],"r"); - - icalparser_set_gen_data(parser,stream); - - do{ - - line = icalparser_get_line(parser,read_stream); - - c = icalparser_add_line(parser,line); - - if (c != 0){ - - printf("%s",icalcomponent_as_ical_string(c)); - - icalparser_claim(parser); - - printf("\n---------------\n"); - - icalcomponent_free(c); - - } - - } while ( line != 0); - -} - -The parser object parameterizes the routine used to get input lines -with icalparser_set_gen_data() and icalparser_get_line(). In this -example, the routine read_stream() will fetch the next line from a -stream, with the stream passed in as the void* parameter d. The parser -calls read_stream() from icalparser_get_line(), but it also needs -to know what stream to use. This is set by the call to icalparser_set_gen_data(). -By using a different routine for read_stream or passing in different -data with icalparser_set_gen_data, you can connect to any data source. - -Using the same mechanism, other implementations could read from memory -buffers, sockets or other interfaces. - -Since the example code is a very common way to use the parser, there -is a convenience routine; - -icalcomponent* icalparser_parse(icalparser *parser, - - char* (*line_gen_func)(char *s, size_t size, void* -d)) - -To use this routine, you still must construct the parser object and -pass in a reference to a line reading routine. If the parser can create -a single component from the input, it will return a pointer to the -newly constructed component. If the parser can construct multiple -components from the input, it will return a reference to an XROOT -component ( of type ICAL_XROOT_COMPONENT.) This XROOT component will -hold all of the components constructed from the input as children. - -5.2 Accessing Components - -Given a reference to a component, you probably will want to access -the properties, parameters and values inside. Libical interfaces let -you find sub-component, add and remove sub-components, and do the -same three operations on properties. - -5.2.1 Finding Components - -To find a sub-component of a component, use: - -icalcomponent* icalcomponent_get_first_component( - - icalcomponent* component, - - icalcomponent_kind kind); - -This routine will return a reference to the first component of the -type 'kind.' The key kind values, listed in icalenums.h are: - -ICAL_ANY_COMPONENT - -ICAL_VEVENT_COMPONENT - -ICAL_VTODO_COMPONENT - -ICAL_VJOURNAL_COMPONENT - -ICAL_VCALENDAR_COMPONENT - -ICAL_VFREEBUSY_COMPONENT - -ICAL_VALARM_COMPONENT - -These are only the most common components; there are many more listed -in icalenums.h. - -As you might guess, if there is more than one subcomponent of the type -you have chosen, this routine will return only the first. to get at -the others, you need to iterate through the component. - -5.2.2 Iterating Through Components - -Iteration requires a second routine to get the next subcomponent after -the first: - -icalcomponent* icalcomponent_get_next_component( - - icalcomponent* component, - - icalcomponent_kind kind); - -With the 'first' and 'next' routines, you can create a for loop to -iterate through all of a components subcomponents - - for(c = icalcomponent_get_first_component(comp,ICAL_ANY_COMPONENT); - - c != 0; - - c = icalcomponent_get_next_component(comp,ICAL_ANY_COMPONENT)) - -{ - - do_something(c); - -} - -This code bit wil iterate through all of the subcomponents in 'comp' -but you can select a specific type of component by changing ICAL_ANY_COMPONENT -to another component type. - -5.2.3 Using Component Iterators - -The iteration model in the previous section requires the component -to keep the state of the iteration. So, you could not use this model -to perform a sorting operations, since you'd need two iterators and -there is only space for one. If you ever call icalcomponent_get_first_component() -when an iteration is in progress, the pointer will be reset to the -beginning. - -To solve this problem, there are also external iterators for components. -The routines associated with these external iterators are: - -icalcompiter icalcomponent_begin_component(icalcomponent* component, -icalcomponent_kind kind); - -icalcompiter icalcomponent_end_component(icalcomponent* component, -icalcomponent_kind kind); - -icalcomponent* icalcompiter_next(icalcompiter* i); - -icalcomponent* icalcompiter_prior(icalcompiter* i); - -icalcomponent* icalcompiter_deref(icalcompiter* i); - -The _begin_() and _end_() routines return a new iterator that points -to the beginning and ending of the list of subcomponent for the given -component, and the kind argument works like the kind argument for -internal iterators. - -After creating an iterators, use _next_() and _prior_() to step forward -and backward through the list and get the component that the iterator -points to, and use _deref() to return the component that the iterator -points to without moving the iterator. All routines will return 0 -when they move to point off the end of the list. - -Here is an example of a loop using these routines: - -for( - - i = icalcomponent_begin_component(impl->cluster,ICAL_ANY_COMPONENT); - - icalcompiter_deref(&i)!= 0; - - icalcompiter_next(&i) - -) { - - icalcomponent *this = icalcompiter_deref(&i); - -} - -5.2.4 Removing Components - -Removing an element from a list while iterating through the list with -the internal iterators can cause problems, since you will probably -be removing the element that the internal iterator points to. The -_remove() routine will keep the iterator valid by moving it to the -next component, but in a normal loop, this will result in two advances -per iteration, and you will remove only every other component. To -avoid the problem, you will need to step the iterator ahead of the -element you are going to remove, like this: - -for(c = icalcomponent_get_first_component(parent_comp,ICAL_ANY_COMPONENT); - - c != 0; - - c = next - -{ - - next = icalcomponent_get_next_component(parent_comp,ICAL_ANY_COMPONENT); - - icalcomponent_remove_component(parent_comp,c); - -} - -Another way to remove components is to rely on the side effect of icalcomponent_remove_component: -if component iterator in the parent component is pointing to the child -that will be removed, it will move the iterator to the component after -the child. The following code will exploit this behavior: - -icalcomponent_get_first_component(parent_comp,ICAL_VEVENT_COMPONENT); - -while((c=icalcomponent_get_current_component(c)) != 0 ){ - - if(icalcomponent_isa(c) == ICAL_VEVENT_COMPONENT){ - - icalcomponent_remove_component(parent_comp,inner); - - } else { - - icalcomponent_get_next_component(parent_comp,ICAL_VEVENT_COMPONENT); - - } - -} - -5.2.5 Working with properties and parameters - -Finding, iterating and removing properties works the same as it does -for components, using the property-specific or parameter-specific -interfaces: - -icalproperty* icalcomponent_get_first_property( - - icalcomponent* component, - - icalproperty_kind kind); - -icalproperty* icalcomponent_get_next_property( - - icalcomponent* component, - - icalproperty_kind kind); - -void icalcomponent_add_property( - - icalcomponent* component, - - icalproperty* property); - -void icalcomponent_remove_property( - - icalcomponent* component, - - icalproperty* property); - -For parameters: - -icalparameter* icalproperty_get_first_parameter( - - icalproperty* prop, - - icalparameter_kind kind); - -icalparameter* icalproperty_get_next_parameter( - - icalproperty* prop, - - icalparameter_kind kind); - -void icalproperty_add_parameter( - - icalproperty* prop, - - icalparameter* parameter); - -void icalproperty_remove_parameter( - - icalproperty* prop, - - icalparameter_kind kind); - -Note that since there should be only one parameter of each type in -a property, you will rarely need to use icalparameter_get_nect_paameter. - -5.2.6 Working with values - -Values are typically part of a property, although they can exist on -their own. You can manipulate them either as part of the property -or independently. - -The most common way to work with values to is to manipulate them from -they properties that contain them. This involves fewer routine calls -and intermediate variables than working with them independently, and -it is type-safe. - -For each property, there are a _get_ and a _set_ routine that access -the internal value. For instanace, for the UID property, the routines -are: - -void icalproperty_set_uid(icalproperty* prop, const char* v) - -const char* icalproperty_get_uid(icalproperty* prop) - -For multi-valued properties, like ATTACH, the value type is usually -a struct or union that holds both possible types. - -If you want to work with the underlying value object, you can get and -set it with: - -icalvalue* icalproperty_get_value (icalproperty* prop) - -void icalproperty_set_value(icalproperty* prop, icalvalue* value); - -Icalproperty_get_value() will return a reference that you can manipulate -with other icalvalue routines. Most of the time, you will have to -know what the type of the value is. For instance, if you know that -the value is a DATETIME type, you can manipulate it with: - -struct icaltimetype icalvalue_get_datetime(icalvalue* value); - -void icalvalue_set_datetime(icalvalue* value, struct icaltimetype v); - -When working with an extension property or value (and X-PROPERTY or -a property that has the parameter VALUE=x-name ) the value type is -always a string. To get and set the value, use: - -void icalproperty_set_x(icalproperty* prop, char* v); - -char* icalproperty_get_x(icalproperty* prop); - -All X properties have the type of ICAL_X_PROPERTY, so you will need -these routines to get and set the name of the property: - -char* icalproperty_get_x_name(icalproperty* prop) - -void icalproperty_set_x_name(icalproperty* prop, char* name); - -5.2.7 Checking Component Validity - -RFC 2446 defines rules for what properties must exist in a component -to be used for transferring scheduling data. Most of these rules relate -to the existence of properties relative to the METHOD property, which -declares what operation a remote receiver should use to process a -component. For instance, if the METHOD is REQUEST and the component -is a VEVENT, the sender is probably asking the receiver to join in -a meeting. In this case, RFC2446 says that the component must specify -a start time (DTSTART) and list the receiver as an attendee (ATTENDEE). - -Libical can check these restrictions with the routine: - -int icalrestriction_check(icalcomponent* comp); - -This routine returns 0 if the component does not pass RFC2446 restrictions, -or if the component is malformed. The component you pass in must be -a VCALENDAR, with one or more children, like the examples in RFC2446. - -When this routine runs, it will insert new properties into the component -to indicate any errors it finds. See section 6.5.3, X-LIC-ERROR for -more information about these error properties. - -5.2.8 Converting Components to Text - -To create an RFC2445 compliant text representation of an object, use -one of the *_as_ical_string() routines: - -char* icalcomponent_as_ical_string (icalcomponent* component) - -char* icalproperty_as_ical_string (icalproperty* property) - -char* icalparameter_as_ical_string (icalparameter* parameter) - -char* icalvalue_as_ical_string (icalvalue* value) - -In most cases, you will only use icalcomponent_as_ical_string (), since -it will cascade and convert all of the parameters, properties and -values that are attached to the root component. - -Icalproperty_as_ical_string() will terminate each line with the RFC2445 -specified line terminator "\\n" However, if you compile with the symbol -ICAL_UNIX_NEWLINE undefined, ( it is defined by default) it will terminate -lines with "\\n\\r" - -Remember that the string returned by these routines is owned by the -library, and will eventually be re-written. You should copy it if -you want to preserve it. - -5.3 Time - -5.3.1 Time structure - -LIbical defines it's own time structure for storing all dates and times. -It would have been nice to re-use the C library's struct tm, but that -structure does not differentiate between dates and times, and between -local time and UTC. The libical structure is: - -struct icaltimetype { - - int year; - - int month; - - int day; - - int hour; - - int minute; - - int second; - - int is_utc; /* 1-> time is in UTC timezone */ - - int is_date; /* 1 -> interpret this as date. */ }; - -The year, month, day, hour, minute and second fields hold the broken-out -time values. The is_utc field distinguishes between times in UTC and -a local time zone. The is_date field indicates if the time should -be interpreted only as a date. If it is a date, the hour, minute and -second fields are assumed to be zero, regardless of their actual vaules. - -5.3.2 Creating time structures - -There are several ways to create a new icaltimetype structure: - -struct icaltimetype icaltime_from_string(const char* str); - -struct icaltimetype icaltime_from_timet(time_t v, int is_date); - -struct icaltimetype icaltime_from_int(int v, int is_date, int is_utc); - -Icaltime_from_string takes any RFC2445 compliant time string: - -struct icaltimetype tt = icaltime_from_string("19970101T103000"); - -Icaltime_from_timet takes a timet value, representing seconds past -the POSIX epoch, and a flag to indicate if the time is a date. Dates -have an identical structure to a time, but the time portion ( hours, -minuts and seconds ) is always 00:00:00. Dates act differently in -sorting an comparision, and they have a different string representation -in RFC2445. - -The icaltime_from_int is like icaltime_from_timet, but with an arbitrary -epoch. This routine was a mistake and is deprecated. - -5.3.3 Time manipulating routines - -The null time value is used to indicate that the data in the structure -is not a valid time. - -struct icaltimetype icaltime_null_time(void); - -int icaltime_is_null_time(struct icaltimetype t); - -It is sensible for the broken-out time fields to contain values that -are not permitted in an ISO compliant time string. For instance, the -seconds field can hold values greater than 59, and the hours field -can hold values larger than 24. The excessive values will be rolled -over into the next larger field when the structure is normalized. - -struct icaltimetype icaltime_normalize(struct icaltimetype t); - -Normalizing allows you to do arithmetic operations on time values. - -struct icaltimetype tt = icaltime_from_string("19970101T103000"); - -tt.days +=3 - -tt.second += 70; - -tt = icaltime_normalize(tt); - -There are several routines to get the day of the week or month, etc, -from a time structure. - -short icaltime_day_of_year(struct icaltimetype t); - -struct icaltimetype icaltime_from_day_of_year(short doy, short year); - -short icaltime_day_of_week(struct icaltimetype t); - -short icaltime_start_doy_of_week(struct icaltimetype t); - -short icaltime_week_number(short day_of_month, short month, short year); - -struct icaltimetype icaltime_from_week_number(short week_number, short -year); - -short icaltime_days_in_month(short month,short year); - -Two routines convert time structures to and from the number of seconds -since the POSIX epoch. The is_date field indicates whether or not -the hour, minute and second fields should be used in the conversion. - -struct icaltimetype icaltime_from_timet(time_t v, int is_date); - -time_t icaltime_as_timet(struct icaltimetype); - -The compare routine works exactly like strcmp, but on time structures. - -int icaltime_compare(struct icaltimetype a,struct icaltimetype b); - -The following routines convert between UTC and a named timezone. The -tzid field must be a timezone name from the Olsen database, such as -"America/Los_Angeles." - -The utc_offset routine returns the offset of the named time zone from -UTC, in seconds. - -The tt parameter in the following routines indicates the date on which -the conversion should be made. The tt parameter is necessary because -timezones have many different rules for when daylight savings time -is used, and these rules can change over time. So, for a single timezone -one year may have daylight savings time on March 15, but for other -years March 15 may be standard time, and some years may have standard -time all year. - -int icaltime_utc_offset(struct icaltimetype tt, char* tzid); - -int icaltime_local_utc_offset(); - -struct icaltimetype icaltime_as_utc(struct icaltimetype tt,char* tzid); - -struct icaltimetype icaltime_as_zone(struct icaltimetype tt,char* tzid); - -struct icaltimetype icaltime_as_local(struct icaltimetype tt); - -5.4 Storing Objects - -The libical distribution includes a separate library, libicalss, that -allows you to store iCal component data to disk in a variety of ways. -This library also includes code to implement the CSTP protocol of -CAP and has some routines for deciphering incomming messages. - -The file storage routines are organized in an inheritance heirarchy -that is rooted in icalset, with the derived class icalfileset and -icaldirset. Icalfileset stores components to a file, while icaldirset -stores components to multiple files, one per month based on DTSTAMP. -Other storages classess, for storage to a heap or a mysql database -are planned for the future. - -All of the icalset derived classes have the same interface: - -icaldirset* icaldirset_new(const char* path); - -void icaldirset_free(icaldirset* store); - -const char* icaldirset_path(icaldirset* store); - -void icaldirset_mark(icaldirset* store); - -icalerrorenum icaldirset_commit(icaldirset* store); - -icalerrorenum icaldirset_add_component(icaldirset* store, icalcomponent* -comp); - -icalerrorenum icaldirset_remove_component(icaldirset* store, icalcomponent* -comp); - -int icaldirset_count_components(icaldirset* store, icalcomponent_kind -kind); - -icalerrorenum icaldirset_select(icaldirset* store, icalcomponent* gauge); - -void icaldirset_clear(icaldirset* store); - -icalcomponent* icaldirset_fetch(icaldirset* store, const char* uid); - -int icaldirset_has_uid(icaldirset* store, const char* uid); - -icalcomponent* icaldirset_fetch_match(icaldirset* set, icalcomponent -*c); - -icalerrorenum icaldirset_modify(icaldirset* store, icalcomponent *oldc, -icalcomponent *newc); - -icalcomponent* icaldirset_get_current_component(icaldirset* store); - -icalcomponent* icaldirset_get_first_component(icaldirset* store); - -icalcomponent* icaldirset_get_next_component(icaldirset* store); - -5.4.1 Creating a new set - -You can create a new set from either the base class or the direved -class. From the base class use one of: - -icalset* icalset_new_file(const char* path); - -icalset* icalset_new_dir(const char* path); - -icalset* icalset_new_heap(void); - -icalset* icalset_new_mysql(const char* path); - -You can also create a new set based on the derived class, For instance, -with icalfileset: - -icalfileset* icalfileset_new(const char* path); - -icalfileset* icalfileset_new_open(const char* path, int flags, mode_t -mode); - -Icaset_new_file is identical to icalfileset_new. BOth routines will -open an existing file for readinga and writing, or create a new file -if it does not exist. Icalfilset_new_open takes the same arguments -as the open() system routine and behaves in the same way. - -The icalset and icalfilset objects are somewhat interchangable -- you -can use an icalfileset* as an argument to any of the icalset routines. - -The following examples will all use icalfileset routines; using the -other icalset derived classess will be similar. - -5.4.2 Adding, Finding and Removing Components - -To add components to a set, use: - -icalerrorenum icalfileset_add_component(icalfileset* cluster, icalcomponent* -child); - -The fileset keeps an inmemory copy of the components, and this set -must be written back to the file ocassionally. There are two routines -to manage this: - -void icalfileset_mark(icalfileset* cluster); - -icalerrorenum icalfileset_commit(icalfileset* cluster); - -Icalfileset_mark indicates that the in-memory components have changed. -Calling the _add_component routine will call _mark automatically, -but you may need to call it yourself if you have made a change to -an existing component. The _commit routine writes the data base to -disk, but only if it is marked. The _commit routine is called automatically -when the icalfileset is freed. - -To iterate through the components in a set, use: - -icalcomponent* icalfileset_get_first_component(icalfileset* cluster); - -icalcomponent* icalfileset_get_next_component(icalfileset* cluster); - -icalcomponent* icalfileset_get_current_component (icalfileset* cluster); - -These routines work like the corresponding routines from icalcomponent, -except that their output is filtered through a gauge. A gauge is a -test for the properties within a components; only components that -pass the test are returned. A gauge can be constructed from a MINSQL -string with: - -icalgauge* icalgauge_new_from_sql(char* sql); - -Then, you can add the gauge to the set with : - -icalerrorenum icalfileset_select(icalfileset* store, icalgauge* gauge); - -Here is an example that puts all of these routines together: - -void test_fileset() - -{ - - icalfileset *fs; - - icalcomponent *c; - - int i; - - char *path = "test_fileset.ics"; - - icalgauge *g = icalgauge_new_from_sql( - - "SELECT * FROM VEVENT WHERE DTSTART > '20000103T120000Z' AND -DTSTART <= '20000106T120000Z'"); - - - - fs = icalfileset_new(path); - - - - for (i = 0; i!= 10; i++){ - - c = make_component(i); /* Make a new component where DTSTART -has month of i */ - - icalfileset_add_component(fs,c); - - } - - icalfileset_commit(fs); /* Write to disk */ - - icalfileset_select(fs,g); /* Set the gauge to filter components -*/ - - - - for (c = icalfileset_get_first_component(fs); - - c != 0; - - c = icalfileset_get_next_component(fs)){ - - struct icaltimetype t = icalcomponent_get_dtstart(c); - - - - printf("%s\n",icaltime_as_ctime(t)); - - } - - icalfileset_free(fs); - -} - -5.4.3 Other routines - -There are several other routines in the icalset interface, but they -not fully implemented yet. - -5.5 <sec:memory>Memory Management - -Libical relies heavily on dynamic allocation for both the core objects -and for the strings used to hold values. Some of this memory the library -caller owns and must free, and some of the memory is managed by the -library. Here is a summary of the memory rules. - -1) If the function name has "new" in it, the caller gets control - of the memory. ( such as icalcomponent_new(), or icalproperty_new_clone() - ) - -2) If you got the memory from a routine with new in it, you must - call the corresponding *_free routine to free the memory. ( Use - icalcomponent_free() to free objects created with icalcomponent_new()) - -3) If the function name has "add" in it, the caller is transferring - control of the memory to the routine. ( icalproperty_add_parameter() ) - -4) If the function name has "remove" in it, the caller passes in - a pointer to an object and after the call returns, the caller owns - the object. So, before you call icalcomponent_remove_property(comp,foo), - you do not own "foo" and after the call returns, you do. - -5) If the routine returns a string, libical owns the memory and will - put it on a ring buffer to reclaim later. For example, icalcomponent_as_ical_string(). - You'd better strdup() it if you want to keep it, and you don't have - to delete it. - -5.6 Error Handling - -Libical has several error handling mechanisms for the various types -of programming, semantic and syntactic errors you may encounter. - -5.6.1 Return values - -Many library routines signal errors through their return values. All -routines that return a pointer, such as icalcomponent_new(), will -return 0 ( zero ) on a fatal error. Some routines will return a value -of enum icalerrorenum. - -5.6.2 icalerrno - -Most routines will set the global error value icalerrno on errors. -This variable is an enumeration; permissible values can be found in -libical/icalerror.h. If the routine returns an enum icalerrorenum, -then the return value will be the same as icalerrno. You can use icalerror_strerror() -to get a string that describes the error. The enumerations are: - -* ICAL_BADARG_ERROR -- One of the argument to a routine was bad. Typically - for a null pointer. - -* ICAL_NEWFAILED_ERROR -- A new() or malloc() failed - -* ICAL_MALFORMEDDATA_ERROR -- An input string was not in the correct - format - -* ICAL_PARSE_ERROR -- The parser failed to parse an incomming component - -* ICAL_INTERNAL_ERROR -- Largely equivalent to an assert - -* ICAL_FILE_ERROR -- A file operation failed. Check errno for more - detail. - -* ICAL_ALLOCATION_ERROR -- ? - -* ICAL_USAGE_ERROR -- ? - -* ICAL_NO_ERROR -- No error - -* ICAL_MULTIPLEINCLUSION_ERROR -- ? - -* ICAL_TIMEDOUT_ERROR -- For CSTP and acquiring locks - -* ICAL_UNKNOWN_ERROR -- ? - -5.6.3 X-LIC-ERROR and X-LIC-INVALID-COMPONENT - -The library handles semantic and syntactic errors in components by -inserting errors properties into the components. If the parser cannot -parse incoming text ( a syntactic error ) or if the icalrestriction_check() -routine indicates that the component does not meet the requirements -of RFC2446 ( a semantic error) the library will insert properties -of the type X-LIC-ERROR to describe the error. Here is an example -of the error property: - -X-LIC-ERROR;X-LIC-ERRORTYPE=INVALID_ITIP :Failed iTIP restrictions -for property DTSTART. - -Expected 1 instances of the property and got 0 - -This error resulted from a call to icalrestriction_check(), which discovered -that the component does not have a DTSTART property, as required by -RFC2445. - -There are a few routines to manipulate error properties: - -[ The following data is supposed to be in a table. It looks OK in LyX, -but does not format propertly in output. ] - -+-------------------------------------+---------------------------------------------------------+ -| Routine | Purpose | -+-------------------------------------+---------------------------------------------------------+ -| void icalrestriction_check() | Check a component against RFC2446 and insert | -+-------------------------------------+---------------------------------------------------------+ -| | error properties to indicate non compliance | -+-------------------------------------+---------------------------------------------------------+ -| int icalcomponent_count_errors() | Return the number of error properties | -+-------------------------------------+---------------------------------------------------------+ -| | in a component | -+-------------------------------------+---------------------------------------------------------+ -| void icalcomponent_strip_errors() | Remove all error properties in as | -+-------------------------------------+---------------------------------------------------------+ -| | component | -+-------------------------------------+---------------------------------------------------------+ -| void icalcomponent_convert_errors() | Convert some error properties into | -+-------------------------------------+---------------------------------------------------------+ -| | REQUESTS-STATUS proprties to indicate the inability to | -+-------------------------------------+---------------------------------------------------------+ -| | process the component as an iTIP request. | -+-------------------------------------+---------------------------------------------------------+ - - -The types of errors are listed in icalerror.h. They are: - -ICAL_XLICERRORTYPE_COMPONENTPARSEERROR - -ICAL_XLICERRORTYPE_PARAMETERVALUEPARSEERROR - -ICAL_XLICERRORTYPE_PARAMETERNAMEPARSEERROR - -ICAL_XLICERRORTYPE_PROPERTYPARSEERROR - -ICAL_XLICERRORTYPE_VALUEPARSEERROR - -ICAL_XLICERRORTYPE_UNKVCALPROP - -ICAL_XLICERRORTYPE_INVALIDITIP - -The libical parser will generate the error that end in PARSEERROR when -it encounters garbage in the input steam. ICAL_XLICERRORTYPE_INVALIDITIP -is inserted by icalrestriction_check(), and ICAL_XLICERRORTYPE_UNKVCALPROP -is generated by icalvcal_convert() when it encounters a vCal property -that it cannot convert or does not know about. - -Icalcomponent_convert_errors() converts some of the error properties -in a component into REQUEST-STATUS properties that indicate a failure. -As of libical version0.18, this routine only convert *PARSEERROR errors -and it always generates a 3.x ( failure ) code. This makes it more -of a good idea than a really useful bit of code. - -5.6.4 ICAL_ERRORS_ARE_FATAL and icalerror_errors_are_fatal - -If the global variable icalerror_errors_are_fatal is set to 1, then -any error condition will cause the program to abort. The abort occurs -in icalerror_set_errno(), and is done with an assert(0) if NDEBUG -is undefined, and with icalerror_crash_here if NDEBUG is defined. -The default value of icalerror_errors_are_fatal is 1 when ICAL_ERRORS_ARE_FATAL -is defined, and 0 otherwise. Since ICAL_ERRORS_ARE_FATAL is defined -by default, icalerror_errors_are_fatal is also defined by default. - -5.7 Naming Standard - -Structures that you access with the "struct" keyword, such as "struct -icaltimetype" are things that you are allowed to see inside and poke -at. - -Structures that you access though a typedef, such as "icalcomponent" -are things where all of the data is hidden. - -Component names that start with "V" are part of RFC 2445 or another -iCal standard. Component names that start with "X" are also part of -the spec, but they are not actually components in the spec. However, -they look and act like components, so they are components in libical. -Names that start with "XLIC" or "X-LIC" are not part of any iCal spec. -They are used internally by libical. - -Enums that identify a component, property, value or parameter end with -"_COMPONENT," "_PROPERTY," "_VALUE," or "_PARAMETER"s - -Enums that identify a parameter value have the name of the parameter -as the second word. For instance: ICAL_ROLE_REQPARTICIPANT or ICAL_PARTSTAT_ACCEPTED. - -The enums for the parts of a recurarance rule and request statuses -are irregular. - -6 Hacks and Bugs - -There are a lot of hacks in the library -- bits of code that I am not -proud of and should probably be changed. These are marked with the -comment string "HACK." - -7 Library Reference - -7.1 Manipulating struct icaltimetype - -7.1.1 Struct icaltimetype - -struct icaltimetype - -{ - - int year; - - int month; - - int day; - - int hour; - - int minute; - - int second; - - int is_utc; - - int is_date; - - const char* zone; - -}; |