This commit was manufactured by cvs2svn to create tag 'GAL_0_8'.GAL_0_8

svn path=/tags/GAL_0_8/; revision=9892

1 files changed, 0 insertions, 1539 deletions

diff --git a/help/C/usage-mail.sgml b/help/C/usage-mail.sgml
deleted file mode 100644
index 9ec12d9e5b..0000000000
--- a/help/C/usage-mail.sgml
+++ /dev/null
@@ -1,1539 +0,0 @@
-<!--
-<!DOCTYPE Chapter PUBLIC "-//GNOME//DTD DocBook PNG Variant V1.1//EN">
--->
-
-<chapter id="usage-mail"> 
-  <title>Evolution Mail</title>
-  <abstract>
-    <title> An Overview of the Evolution Mailer</title>
-    <para>
-       <application>Evolution</application> email is like other email
-       programs in all the ways you would hope:
-     <itemizedlist>
-       <listitem>
-	 <para>
-	   It can sort and organize your mail in a wide variety of ways with
-	   folders, searches, and filters.
-	 </para>
-       </listitem>
-       <listitem>
-	 <para>
-	  It can send and receive mail in HTML or as plain text, and
-	  permits multiple file attachments.
-	 </para>
-       </listitem>
-       <listitem>
-	 <para>
-	   It supports multiple mail sources, including <glossterm
-	   linkend="imap">IMAP</glossterm>, <glossterm
-	   linkend="pop">POP3</glossterm>, local
-	   <systemitem><filename>mbox</filename></systemitem> and
-	   <systemitem><filename>mh</filename></systemitem> files, and
-	   even NNTP messages (newsgroups), which aren't technically
-	   email.
-	 </para>
-       </listitem>
-     </itemizedlist>
-    </para>
-    <para>
-      However, <application>Evolution</application> has some important
-      differences.  First, it's built to handle very large amounts of
-      mail without slowing down or crashing.  Both the <link
-      linkend="usage-mail-organize-filters">filtering</link> and <link
-      linkend="usage-mail-organize-search">searching</link> functions
-      were built for speed and efficiency on gargantuan volumes of
-      mail. There's also the <application>Evolution</application>
-      <link linkend="usage-mail-organize-vFolders">Virtual
-      Folder</link>, an advanced organizational feature not found in
-      other mail clients.  If you get a lot of mail, or if you keep
-      every message you get in case you need to refer to it later,
-      you'll find this feature especially useful.
-    </para>
-  </abstract>
-
-  <sect1 id="usage-mail-getnsend">
-    <title>Reading, Getting and Sending Mail</title>
-
-    <sect2 id="usage-mail-getnsend-read">
-      <title>Reading Mail</title>
-      <para>
-       You can start reading email by clicking
-       <guibutton>Inbox</guibutton> in the shortcut bar. The first
-       time you use <application>Evolution</application>, it will
-       start with the <interface>Inbox</interface> open and show you a
-       message from Ximian welcoming you to the application.
-      </para>
-      <para>
-	Your <application>Evolution</application>
-	<guilabel>Inbox</guilabel> will look something like the one in
-	<xref linkend="usage-mail-intro-fig">. Just below the toolbar
-	is the <interface>message list</interface>, showing message
-	header information like <guilabel>Subject</guilabel> and
-	<guilabel>Date</guilabel>.  The message itself appears below
-	that, in the <interface>view pane</interface>.  If you find
-	the <interface>view pane</interface> too small, you can resize
-	the pane, enlarge the whole window, or double-click on the
-	message in the <interface>message list</interface> to have it
-	open in a new window.  Just like with folders, you can
-	right-click on messages in the message list and get a menu of
-	possible actions.
-     </para>
-
- <!-- ==============Figure=================================== -->
- 
-      <figure id="usage-mail-intro-fig">
-	  <title>Evolution Mail</title>
-	  <screenshot>
-	    <screeninfo>Inbox</screeninfo>
-	    <graphic fileref="fig/mail-pic" format="png" srccredit="Aaron Weber">
-	</graphic>
-	</screenshot>
-      </figure>
-<!-- ==============End of Figure============================== -->
-
-      <para>
-         Most of the mail-related actions you'll want to perform are
-         listed in the <guimenu>Message</guimenu> menu in the menu
-         bar.  The most frequently used ones, like
-         <guimenuitem>Reply</guimenuitem> and
-         <guimenuitem>Forward</guimenuitem>, also appear as buttons in
-         the toolbar, and almost all of them are duplicated in the
-         right-click menu and as keyboard shortcuts, which tend to be
-         faster once you get the hang of them.  You can choose
-         whichever way you like best; the idea is that the software
-         should work the way you want, rather than making you work the
-         way the it does.
-	 <tip id="view-headers">
-	 <title>Take a look at the headers</title>
-	 <para>
-	 To look at the entire source of your email message, including
-	 all the header information, select
-	 <menuchoice><guimenu>View</guimenu><guimenuitem>Source</guimenuitem></menuchoice>
-	 </para>
-	 </tip>
-       </para>
-
-      <sect3 id="usage-mail-listorder">
-	<title>Sorting the message list</title>
-	<para>
-          One of the ways <application>Evolution</application> lets
-          you choose the way you work is the way it lets you sort your
-          message lists.  To sort by sender, subject, or date, click
-          on the bars with those labels at the top of the message
-          list. The direction of the arrow next to the label indicates
-          the direction of the sort, and if you click again, you'll
-          sort them in reverse order. For example, click once on
-          <guilabel>Date</guilabel> to sort messages by date from
-          oldest to newest.  Click again, and
-          <application>Evolution</application> sorts the list from
-          newest to oldest. You can also right-click on the message
-          header bars to get a set of sorting options, and add or
-          remove columns from the message list.  You can find detailed
-          instructions on how to customize your message display
-          columns in <xref linkend="usage-mail-organize-columns">.
-        </para>
-	<para>
-          You can also choose a threaded message view. Select
-          <menuchoice> <guimenu>View</guimenu>
-          <guimenuitem>Threaded</guimenuitem> </menuchoice> to turn
-          the threaded view on or off.  When you select this option,
-          <application>Evolution</application> groups the replies to a
-          message with the original, so you can follow the thread of a
-          conversation from one message to the next.
-        </para>
-      </sect3>
-      <sect3 id="usage-mail-getnsend-delete">
-        <title>Deleting Mail</title>
-        <para>
-          Once you've read your mail, you may want to get rid of
-          it. To mark a message for deletion, select it in the the
-          <interface>message list</interface> by clicking on it once.
-          Then click on the <guibutton>Delete</guibutton> button in
-          the tool bar. Or, right-click on a message and choose
-          <guimenuitem>Delete</guimenuitem> from the right-click
-          menu. The message will appear with a line through it, to
-          show that you've marked it for deletion.
-        </para>
-        <para>
-          If you change your mind and decide you want to keep it,
-          select <menuchoice> <guimenu>Message</guimenu>
-          <guimenuitem>Undelete</guimenuitem></menuchoice>.  If you
-          really want to get rid of it, choose
-          <guimenuitem>Expunge</guimenuitem> from the
-          <guimenu>Folder</guimenu> menu.  That will delete it
-          permanently.
-        </para>
-      </sect3>
-    </sect2>
-
-    <sect2 id="usage-mail-getnsend-get">
-      <title>Checking Mail</title>
-      <para>
-	Now that you've had a look around the
-	<interface>Inbox</interface>, it's time to check for new mail.
-	Click <guibutton>Get mail</guibutton> in the toolbar to check
-	your mail.  If it's the first time you've done so, the
-	<interface>mail setup assistant</interface> will ask you for
-	the information it needs to check your mail (see <xref
-	linkend="config-setupassist"> for more information). 
-     </para>
-     <para>
-        Then, you need to enter your email
-        password. <application>Evolution</application> will remember
-        your password until until you select <menuchoice>
-        <guimenu>Settings</guimenu> <guimenuitem>Forget
-        Passwords</guimenuitem> </menuchoice>.
-      </para>
-      <para>
-        Once it's validated the password,
-	<application>Evolution</application> will check your mail.
-	New mail will appear in the local <interface>Inbox</interface>
-	if you're using a <glossterm>POP</glossterm> account, and in
-	your <glossterm>IMAP</glossterm> folders if you use IMAP.  If
-	you have chosen to use IMAP, and you have multiple folders on
-	your IMAP server, you may need to subscribe to them.  To learn
-	how to use the subscription manager, read <xref
-	linkend="usage-mail-subscriptions">.
-      </para>
-   
-     <note id="badmailsettings">
-     <title>Can't Check Mail?</title> 
-     <para>
-	If you get an error message instead of mail, you probably need
-	to change your network settings.  To learn how to do that,
-	have a look at <xref linkend="config-prefs-mail-network">, or
-	ask your system administrator.
-      </para>
-    </note>
-
-      <sect3 id="usage-mail-getnsend-get-news">
-         <title>Using Evolution for News </title>
-       <para>
-         Newsgroups are so similar to email that there's no reason not
-         to read them side by side.  If you want to do that, add a
-         news source to your configuration (see <xref
-         linkend="config-prefs-network-news">). The news server will
-         appear as a remote server, and will look quite similar to an
-         IMAP folder.  When you click <guibutton>Get Mail</guibutton>,
-         <application>Evolution</application> will also check for news
-         messages.
-       </para>
-       </sect3>
-
-      <sect3 id="usage-mail-getnsend-get-attach">
-	<title>Attachments and HTML Mail</title>
-	<para>
-	  If someone sends you an <glossterm>attachment</glossterm>, a
-	  file attached to an email,
-	  <application>Evolution</application> will display the file
-	  at the bottom of the message to which it's attached.  Text,
-	  HTML, and most images will be displayed within the message
-	  itself.  For other files,
-	  <application>Evolution</application> will show an icon at
-	  the end of the message.  Right-click on the icon to get a
-	  list of options which will vary depending on the type of
-	  attachment. You will have the option to display most files
-	  as part of the message, export them to a different
-	  application (images to Eye of GNOME, spreadsheets to
-	  Gnumeric, and so forth), or save them to disk.
-        </para>
-
-	<para>
-	   <application>Evolution</application> can also display
-	   HTML-formatted mail, complete with graphics.  HTML
-	   formatting will display automatically, although you can
-	   turn it off if you prefer.
-	</para>
-      </sect3>
-    </sect2>
-
-    <sect2 id="usage-mail-getnsend-send">
-      <title>Writing and Sending Mail</title>
-      <para>
-	 You can start writing a new email message by selecting
-	 <menuchoice> <guimenu>File</guimenu>
-	 <guisubmenu>New</guisubmenu> <guimenuitem>
-	 Mail Message</guimenuitem></menuchoice>, or by pressing the
-	 <guibutton>Compose</guibutton> button in the Inbox toolbar.
-	 When you do so, the <interface>New Message</interface> window
-	 will open, as shown in <xref
-	 linkend="usage-mail-newmsg-fig">.
-      </para>
-
-<!--   ==============Figure=================================== -->
-      <figure id="usage-mail-newmsg-fig">
-	<title>New Message Window</title>
-	<screenshot>
-	  <screeninfo>Evolution Main Window</screeninfo>
-	  <graphic fileref="fig/newmsg-pic" format="png" srccredit="Kevin Breit">
-	</graphic>
-	</screenshot>
-      </figure>
-<!-- ==============End of Figure=================================== -->
-
- <!-- Check the alignment of the following paragraph in the PS and
- HTML output: it's indented for no good reason -->
-      <para>
-	 Enter an address in the <guilabel>To:</guilabel> field, a
-	 subject in the <guilabel>Subject:</guilabel> and a message in
-	 the big empty box at the bottom of the window, and press
-	 <guibutton>Send</guibutton>.
-       </para>
-
-      <sect3 id="usage-mail-getnsend-send-delay">
-	<title>Saving Messages for Later</title>
-	<para>
-	   Evolution will send mail immediately unless you tell it to
-	   do otherwise by selecting <menuchoice>
-	   <guimenu>File</guimenu> <guimenuitem>Send
-	   Later</guimenuitem></menuchoice>.  This will add your
-	   messages to the <guilabel>Outbox</guilabel> queue.  Then,
-	   when you press <guibutton>Send</guibutton> in another
-	   message, or <guibutton>Get Mail</guibutton> in the main
-	   mail window, all your unsent messages will go out at once.
-	   I like to use "Send Later" because it gives me a chance to
-	   change my mind about a message before it goes out.  That
-	   way, I don't send anything I'll regret the next day.
-	</para>
-	<para>
-	   To learn more about how you can specify message queue and
-	   filter behavior, see <xref linkend="config-prefs-mail">.
-	</para>
-
-	<para>
-           You can also choose to save messages as drafts or as text
-           files.  Choose
-           <menuchoice>
-             <guimenu>File</guimenu>
-             <guimenuitem>Save</guimenuitem>
-	  </menuchoice>
-          or <guimenuitem>Save As</guimenuitem> to save your message
-          as a text file. If you prefer to keep your message in a
-          folder (the <guilabel>Drafts</guilabel> folder would be the
-          obvious place), you can select <menuchoice>
-          <guimenu>File</guimenu> <guimenuitem>Save In
-          Folder</guimenuitem> </menuchoice>. 
-        </para>
-      </sect3>
-      <sect3 id="usage-mail-getnsend-send-compose">
-        <title>Advanced Mail Composition</title>
-        <para>
-	  You can probably guess the purpose of the buttons labelled
-	  <guibutton>Cut</guibutton>, <guibutton>Copy</guibutton>,
-	  <guibutton>Paste</guibutton>, <guibutton>Undo</guibutton>
-	  and <guibutton>Redo</guibutton>, but there's a bit more to
-	  sending mail that's less obvious.  In the next few sections,
-	  you'll see how <application>Evolution</application> handles
-	  additional features, including large recipient lists,
-	  attachments, and forwarding.
-        </para>
-      <sect4 id="usage-mail-getnsend-send-attach">
-	<title>Attachments</title>
-	<para>
-	    If you want to attach a file to your email message, you
-	    can drag it from your desktop into the message window, or
-	    click the button in the toolbar with a paper clip on it,
-	    labelled <guibutton>Attach</guibutton>.  If you click the
-	    <guibutton>Attach</guibutton> button,
-	    <application>Evolution</application> will open a file
-	    selection dialog box to ask you which file you want to
-	    send.  Select the file and click <guilabel>OK</guilabel>.
-        </para>
-	<para>
-            To hide the display of files you've attached to the
-            message, select <menuchoice>
-            <guimenu>View</guimenu> <guimenuitem>Hide
-            Attachments</guimenuitem> </menuchoice>; to show them
-            again, choose <guimenuitem>Show Attachments</guimenuitem>.
-        </para>
-	<para>
-            When you send the message, a copy of the attached file
-	    will go with it.  Be aware that big attachments can take a
-	    long time to download.
-          </para>
-	</sect4>
-        <sect4 id="usage-mail-getnsend-send-to-types">
-         <title>Types of Recipients</title>
-        <para>
-	    <application>Evolution</application>, like most email
-	    programs recognizes three types of addressee: primary
-	    recipients, secondary recipients, and hidden ("blind")
-	    recipients.
-         </para>
-         <para>
-	    The simplest way to direct a message is to put the email
-            address or addresses in the <guilabel>To:</guilabel>
-            field, which denotes primary recipients.  To send mail to
-            more than one or two people, you can use the the
-            <guilabel>Cc:</guilabel> field.
-	  </para>
-	  <para>
-	    Hearkening back to the dark ages when people used
-	    typewriters and there were no copy machines, "Cc" stands
-	    for "Carbon Copy."  Use it whenever you want to share a
-	    message you've written to someone else.
-	    <example id="ex-mail-cc">
-	      <title>Using the Cc: field</title>
-	      <para>
-	         When Susan sends an email to a client, she puts her
-	         co-worker, Tim, in the in the
-	         <guilabel>Cc:</guilabel> field, so that he know
-	         what's going on.  The client can see that Tim also
-	         received the message, and knows that he can talk to
-	         Tim about the message as well.
-	      </para>
-	    </example>
-	  </para>
-	  <para>
-	    If you have a large number of recipients, or if you want
-	    to send mail to several people without sharing the
-	    recipient list, you should use
-	    <guilabel>Bcc:</guilabel>. "Bcc" stands for "Blind Carbon
-	    Copy", and it sends messages discreetly.  In other words,
-	    the people in the <guilabel>Bcc:</guilabel> field get the
-	    message, but nobody sees that they got it.  Note that the
-	    contents of the <guilabel>To:</guilabel> and
-	    <guilabel>Cc:</guilabel> fields are visible to all
-	    recipients, even to people on the
-	    <guilabel>Bcc:</guilabel> list.
-
-	    <example id="ex-mail-bcc">
-	      <title>Using the Bcc: field</title>
-	      <para>
-	         Tim is sending an email announcement to all of his
-	         company's clients, some of whom are in competition
-	         with each other, and all of whom value their
-	         privacy. He needs to use the
-	         <guilabel>Bcc:</guilabel> field here.  If he puts
-	         every address from his address book's "Clients"
-	         category into the <guilabel>To:</guilabel> or
-	         <guilabel>Cc:</guilabel> fields, he'll make the
-	         company's <emphasis>entire</emphasis> client list
-	         public. It seems like a small difference, but it can
-	         make a huge difference in some situations.
-	     </para>
-	    </example>
-	  </para>
-	</sect4>
-
-        <sect4 id="usage-mail-getnsend-send-to">
-	<title>Choosing Recipients Quickly</title>
-	<para>
-	  If you have created address cards in the contact manager,
-	  you can also enter nicknames or other portions of address
-	  data, and <application>Evolution</application> will complete
-	  the address for you. <!-- (INSERT description of UI for this
-	  feature, once it is decided upon). --> If you enter a name
-	  or nickname that can go with more than one card, Evolution
-	  will open a dialog box to ask you which person you meant.
-	  <!-- (NOT YET) Also, <application>Evolution</application>
-	  will add a domain to any unqualified addresses.  By default,
-	  this is your domain, but you can choose which one mail
-	  preferences dialog. -->
-          </para>
-	  <para>
-            Alternately, you can click on the
-            <guibutton>To:</guibutton>, <guibutton>Cc:</guibutton>, or
-            <guibutton>Bcc:</guibutton> buttons to get a list &mdash;
-            potentially a very long one &mdash; of the email addresses
-            in your contact manager.  Select addresses and click on
-            the arrows to move them into the appropriate address
-            columns.
-          </para>
-	  <para>
-            For more information about using email together with the
-	    contact manager and the calendar, see <xref
-	    linkend="usage-contact-automate"> and <xref
-	    linkend="usage-calendar-apts">.
-	  </para>
-        </sect4>
-      </sect3>
-      
-      <sect3 id="usage-mail-getnsend-send-reply">
-	<title>Replying to Messages</title>
-	<para>
-	   To reply to a message, press the
-	   <guibutton>Reply</guibutton> button while it is selected,
-	   or choose <guimenuitem>Reply to Sender</guimenuitem> from
-	   the message's right-click menu.  That will open the
-	   <interface>message composer</interface>.  The
-	   <guilabel>To:</guilabel> and <guilabel>Subject</guilabel>
-	   fields will already be filled, although you can alter them
-	   if you wish.  In addition, the full text of the old message
-	   is inserted into the new message, either in italics (for
-	   HTML display) or with the &gt; character before each line
-	   (in plain text mode), to indicate that it's part of the
-	   previous message.  People often intersperse their message
-	   with the quoted material as shown in <xref
-	   linkend="usage-mail-getnsend-reply-fig">.
-
-<!-- note that this figure should have a reply message ready to send,
-with quoted materials and the relevant replies interspersed-->
- <!-- ==============Figure=================================== -->
-       <figure id="usage-mail-getnsend-reply-fig">
-	 <title>Reply Message Window</title>
-	 <screenshot>
-	  <screeninfo>Evolution Main Window</screeninfo>
-	  <graphic fileref="fig/replymsg" format="png" srccredit="Aaron Weber">
-	</graphic>
-	</screenshot>
-      </figure>
-<!-- ==============End of Figure=================================== -->
-	</para>
-
-	<para>
-	  If you're reading a message with several recipients, you may
-	   wish to use <guibutton>Reply to All</guibutton> instead of
-	   <guibutton>Reply</guibutton>.  If there are large numbers
-	   of people in the <guilabel>Cc:</guilabel> or
-	   <guilabel>To:</guilabel> fields, this can save substantial
-	   amounts of time. 
-	  <example>
-	    <title>Using the Reply to All feature</title>
-	    <para>
-	      Susan sends an email to a client and sends copies to Tim
-	      and to an internal company mailing list of co-workers.
-	      If Tim wants to make a comment for all of them to read,
-	      he uses <guibutton>Reply to All</guibutton>, but if he
-	      just wants to tell Susan that he agrees with her, he
-	      uses <guibutton>Reply</guibutton>.  Note that his reply
-	      will not reach anyone that Susan put on her
-	      <guilabel>Bcc</guilabel> list, since that list is not
-	      shared with anyone.
-	    </para>
-	  </example>
-	</para>
-      </sect3>
-      <sect3 id="usage-mail-getnsend-send-find">
-        <title>Searching and Replacing with the Composer</title>
-	<para>
-           You're probably familiar with search and replace features,
-           and if you come from a Linux or Unix background, you
-           probably know what <guimenuitem>Find Regex</guimenuitem>
-           does.  If you aren't among the lucky who already know,
-           here's a quick rundown of an important section of the
-           <guimenu>Edit</guimenu> menu.
-        </para>
-	<para>
-           <variablelist>
-	    <varlistentry>
-	      <term><guimenuitem>Find</guimenuitem></term>
-	      <listitem><para> Enter a word or phrase, and
-	      <application>Evolution</application> will find it
-              in your message.
-	      </para></listitem>
-	    </varlistentry>
-	    
-	    <varlistentry>
-	      <term><guimenuitem>Find Regex</guimenuitem></term>
-	      <listitem>
-		<para>
-                  Find a regex, also called a
-                  <glossterm linkend="regular-expression">regular
-                  expression</glossterm>, in your composer window.
-               </para>
-             </listitem>
-	    </varlistentry>
-
-	    <varlistentry>
-	      <term><guimenuitem>Find Again</guimenuitem></term>
-	      <listitem><para>
-                   Select this item to repeat the last search you performed.
-              </para></listitem>
-	    </varlistentry>
-
-	    <varlistentry>
-	       <term><guimenuitem>Replace</guimenuitem></term>
-	       <listitem><para> 
-                 Find a word or phrase, and replace it with
-	         something else.  
-               </para></listitem>
-	    </varlistentry>
-
-	  </variablelist>
-        </para>  
-	<para>
-            For all of these menu items, you can choose whether or not
-            to <guilabel>Search Backwards</guilabel> in the document
-            from the point where your cursor is.  For all but the
-            regular expression search (which doesn't need it), you are
-            offered a check box to determine whether the search is to
-            be <guilabel>Case Sensitive</guilabel> when it determines
-            a match.
-        </para>
-      </sect3>
-      <sect3 id="usage-mail-getnsend-send-html">
-	<title>Embellish your email with HTML</title>
-	<para>
-            Normally, you can't set text styles or insert pictures in
-            emails, which is why you've probably seen people use far
-            too many exclamation points for emphasis, or use
-            <glossterm linkend="emoticon">emoticons</glossterm> to
-            convey their feelings.  However, most newer email programs
-            can display images and text styles as well as basic
-            alignment and paragraph formatting. They do this with
-            <glossterm linkend="html">HTML</glossterm>, just like web
-            pages do.
-        </para>
-	<note>
-	  <title>HTML Mail is not a Default Setting</title>
-	  <para>
-	    Some people do not have HTML-capable mail clients, or
-	    prefer not to receive HTML-enhanced mail because it is
-	    slower to download and display.  <emphasis>Some</emphasis>
-	    people refer to HTML mail as "the root of all evil" and
-	    get very angry if you send them HTML mail, which is why
-	    <application>Evolution</application> sends plain text
-	    unless you explicitly ask for HTML.  To send HTML mail,
-	    you will need to select <menuchoice>
-	    <guimenu>Format</guimenu> <guimenuitem>
-	    HTML</guimenuitem></menuchoice>.  Alternately, you can set
-	    your default mail format preferences in the mail
-	    configuration dialog.  See <xref
-	    linkend="config-prefs-mail-other"> for more information.
-          </para>
-	</note>
-	<para>
-           HTML formatting tools are located in the toolbar just above
-	   the space where you'll actually compose the message, and
-	   they also appear in the <guimenu>Insert</guimenu> and
-	   <guimenu>Format</guimenu> menus.  
-	  </para>
-	  <para>
-            The icons in the toolbar are explained in <glossterm
-            linkend="tooltip">tool-tips</glossterm>, which appear when
-            you hold your mouse over the buttons.  The buttons fall
-            into four categories:
-            <variablelist>
-             <varlistentry>
-             <term>Headers and lists</term>
-	      <listitem>
-		<para>
-                  At the left edge of the toolbar, you can choose
-                  <guilabel>Normal</guilabel> for a default text style
-                  or <guilabel>Header 1</guilabel> through
-                  <guilabel>Header 6</guilabel> for varying sizes of
-                  header from large (1) to tiny (6). Other styles
-                  include <guilabel>pre</guilabel>, to use the HTML
-                  tag for preformatted blocks of text, and three types
-                  of <guilabel>List Item</guilabel> for the highly
-                  organized.
-                </para>
-	      </listitem>
-           </varlistentry>
-           <varlistentry>
-             <term>Text style</term>
-	      <listitem>
-		<para>
-                  Use these buttons to determine the way your letters
-                  look.  If you have text selected, the style will
-                  apply to the selected text.  If you do not have text
-                  selected, the style will apply to whatever you type
-                  next.  The buttons are:
-                  <itemizedlist mark="none">      
-		  <listitem><para>Push <guibutton>B</guibutton> for bold text</para></listitem>   
-                  <listitem><para>Push <guibutton>I</guibutton> for italics</para></listitem>
-		  <listitem><para>Push <guibutton>U</guibutton> to underline</para></listitem>
-		  <listitem><para>Push <guibutton>S</guibutton> for a strikethrough.</para></listitem>
-                 </itemizedlist>
-               </para>               
-	      </listitem>    
-	    </varlistentry>
-	    <varlistentry>
-	      <term>Alignment</term>
-	      <listitem>
-		<para>
-                   Located next to the text style buttons, these three
-                   paragraph icons should be familiar to users of most
-                   word processing software.  The leftmost button will
-                   make your text aligned to the left, the center
-                   button, centered, and the right hand button,
-                   aligned on the right side.
-                </para>
-	      </listitem>
-	      </varlistentry>
-
-	    <varlistentry>
-	      <term>Indentation rules</term>
-	      <listitem>
-		<para>
-                  The button with the arrow pointing left will reduce
-                  a paragraph's indentation, and the right arrow will
-                  increase its indentation.
-               </para>
-	    </listitem>
-	  </varlistentry>
-
-	    <varlistentry>
-	      <term>Color Selection</term>
-	      <listitem>
-		<para>
-                  At the far right is the color section tool.  The
-                  colored box displays the current text color; to
-                  choose a new one, click the arrow button just to the
-                  right. If you have text selected, the color will
-                  apply to the selected text.  If you do not have text
-                  selected, the color will apply to whatever you type
-                  next.
-               </para>
-	    </listitem>
-	  </varlistentry>
-
-
-	  </variablelist>
-        </para>
-	<para>
-           There are three tools that you can find only in the
-           <guimenu>Insert</guimenu> menu.
-           <variablelist>
-             <varlistentry>
-               <term><guimenuitem>Insert Link</guimenuitem>:</term>
-	       <listitem>
-	        <para>
-                  Use this tool to put hyperlinks in your HTML
-                  messages.  When you select it,
-                  <application>Evolution</application> will prompt you
-                  for the <guilabel>Text</guilabel> that will appear,
-                  and the <guilabel>Link</guilabel>, where you should
-                  enter the actual web address (URL). If you don't
-                  want special link text, you can just enter the address
-                  directly, and <application>Evolution</application>
-                  will recognize it as a link.
-               </para>
-	    </listitem>
-          </varlistentry>
-          <varlistentry>
-            <term> <guimenuitem>Insert Image</guimenuitem>:</term>
-	    <listitem>
-	      <para>
-               Select this item to embed an image into your email, as
-               was done in the welcome message.  Images will appear at
-               the location of the cursor. This is different from
-               attaching them to a message, but not very different.
-              </para>
-	    </listitem>
-           </varlistentry>
-          <varlistentry>
-             <term><guimenuitem>Insert Rule</guimenuitem>:</term>
-             <listitem><para>
-               This will insert a horizontal line, or rule, into your document.
-               You'll be presented with a dialog box which gives you
-               the choice of size, percentage of screen, shading, and
-               alignment; if you leave everything at the default
-               values you'll get a thin black rule all the way across
-               the screen.</para></listitem>
-	</varlistentry>
-
-	  </variablelist>
-          </para>
-	  <note>
-	    <title>A Technical note on HTML Tags</title>
-	    <para>
-	      The composer is a WYSIWYG (What You See Is What You Get)
-	      editor for HTML. That means that if you enter HTML
-	      directly into the composer&mdash; say, <markup
-	      role="html">&lt;B&gt;Bold Text&lt;/B&gt</markup>, the
-	      the composer will assume you meant exactly that string
-	      of characters, and not "make this text bold," as an HTML
-	      composition tool or text editor would.
-	    </para>
-	</note>
-      </sect3>
-   
-
-<!-- Function not implemented, 
-possibly never will be due to security evil. -->
-<!--
-	<sect3 id="usage-mail-getnsend-send-live">
-	  <title>Live Documents</title>
-	  <para>
-	    Later versions of <application>Evolution</application>
-	    will allow you to enliven your email with almost any
-	    sort of document, and even with entire
-	    applications. At this point, however, this feature has not 
-	    yet been implemented.
-	  </para>
-	</sect3>
--->
-
-      <sect3 id="usage-mail-getnsend-fwd">
-	<title>Forwarding Mail</title>      
-	<para>
-	  The post office forwards your mail for you when you change
-	  addresses, and you can forward mail when you get a letter by
-	  mistake.  The email <guilabel>Forward</guilabel> button
-	  works in much the same way.  It's particularly useful if you
-	  have received a message and you think someone else would
-	  like to see it.  You can forward a message as an attachment
-	  to a new message (this is the default) or
-	  you can send it <glossterm linkend="inline">inline</glossterm> as a quoted
-	  portion of the message you are sending.  Attachment
-	  forwarding is best if you want to send the full, unaltered
-	  message on to someone else.  Inline forwarding is best if
-	  you want to send portions of a message, or if you have a
-	  large number of comments on different sections of the
-	  message you are forwarding.  Remember to note from whom the
-	  message came, and where, if at all, you have removed or
-	  altered content.
-	</para>
-	<para>
-	  To forward a message you are reading, press
-	  <guibutton>Forward</guibutton> on the toolbar, or select
-	  <menuchoice> <guimenu>Message</guimenu>
-	  <guimenuitem>Forward</guimenuitem> </menuchoice>.  If you
-	  prefer to forward the message <glossterm linkend="inline">inline</glossterm>
-	  instead of attached, select <menuchoice>
-	  <guimenu>Message</guimenu> <guimenuitem>Forward
-	  Inline</guimenuitem> </menuchoice> from the menu.  Choose an
-	  addressee as you would when sending a new message; the
-	  subject will already be entered, but you can alter it.
-	  Enter your comments on the message in the
-	  <interface>composition frame</interface>, and press
-	  <guibutton>Send</guibutton>.
-	</para>
-      </sect3>
-      <sect3 id="usage-mail-getnsend-ettiquette">
-	<title>Seven Tips for Email Courtesy</title>
-	<para>
-	  I started with ten, but four were "Don't send
-	  <glossterm linkend="spam">spam</glossterm>."
-	  <itemizedlist>
-
-	    <listitem>
-	      <para>
-		 Don't send spam or forward chain mail.  If you must,
-		 watch out for hoaxes and urban legends, and make sure
-		 the message doesn't have multiple layers of
-		 greater-than signs, (&gt;) indicating multiple layers
-		 of careless in-line forwarding.
-	      </para>
-	    </listitem>
-
-	    <listitem>
-	      <para>
-		Always begin and close with a salutation. Say "please"
-		and "thank you," just like you do in real life. You
-		can keep your pleasantries short, but be pleasant!
-	      </para>
-	    </listitem>
-
-	    <listitem>
-	      <para>
-		ALL CAPS MEANS YOU'RE SHOUTING! Don't write a whole
-		message in capital letters.  It hurts people's ears.
-	      </para>
-	    </listitem>
-
-	    <listitem>
-	      <para>
-		 Never write anything in email you wouldn't say in
-		 public.  Old messages have a nasty habit of
-		 resurfacing when you least expect.
-	      </para>
-	    </listitem>
-
-	    <listitem>
-	      <para>
-	       Check your spelling and use complete sentences.
-	      </para>
-	    </listitem>
-
-	    <listitem>
-	      <para>
-		Don't send nasty emails (flames).  If you get one,
-		don't write back.
-	      </para>
-	    </listitem>
-
-	    <listitem>
-	      <para>
-		 When you reply or forward, include just enough of
-		 the previous message to provide context: not too
-		 much, not too little.
-	       </para>
-	    </listitem>
-	  </itemizedlist>
-	</para>
-	<para> Happy mailing! </para>
-      </sect3>
-    </sect2>
-  </sect1>
-
-  <sect1 id="usage-mail-organize">
-    <title>Organizing Your Mail</title>
-    <para>
-      Even if you only get a few email messages a day, you probably
-      want to sort and organize them.  When you get a hundred a day
-      and you want to refer to a message you received six weeks ago,
-      you <emphasis>need</emphasis> to sort and organize them.
-      Fortunately, <application>Evolution</application> has the tools
-      to help you do it.
-    </para>
-    <sect2 id="usage-mail-organize-columns">
-      <title>Sorting Mail with Column Headers</title>
-      <para>
-         By default, the message list has columns with the following
-         headings: an envelope icon indicating whether you have read
-         or replied to a message (closed for unread, open for read,
-         and open with an arrow on it to indicate you've sent a
-         reply), an exclamation point indicating priority, and the
-         <guilabel>From</guilabel>, <guilabel>Subject</guilabel>, and
-         <guilabel>Date</guilabel> fields. You can change their order
-         and remove them by dragging and dropping them.  You can add
-         new ones with the <guimenuitem>Field Chooser</guimenuitem>
-         item in the right click menu for the column headings.
-      </para>
-      <para>
-         Right-click on one of the column headers to get a list of
-         options:
-             <variablelist>
-
-               <varlistentry>
-                  <term><guimenuitem>Sort Ascending</guimenuitem>,
-                  <guimenuitem>Sort Descending</guimenuitem>, and
-                  <guimenuitem>Unsort</guimenuitem></term>
-                  <listitem><para>Which should be pretty obvious. You
-                  can also set these sorts by just clicking on the
-                  column headers.</para></listitem>
-               </varlistentry>
-
-              <varlistentry>
-                  <term><guimenuitem>Group By this Field</guimenuitem></term>
-                  <listitem><para>
-                     Groups messages instead of sorting them. (FIXME: Explain further) 
-                  </para></listitem>
-               </varlistentry>
-
-              <varlistentry>
-                  <term><guimenuitem>Remove this
-                  Column</guimenuitem></term> <listitem><para> Remove
-                  this column from the display. You can also remove
-                  columns by dragging the header off the list and
-                  letting it drop.  </para></listitem>
-               </varlistentry>
-
-              <varlistentry>
-                  <term><guimenuitem>Field
-                  Chooser</guimenuitem></term> <listitem><para> A list
-                  of column headers; just drag and drop them into
-                  place between two existing headers. A red arrow will
-                  appear to show you where you're about to put the
-                  column.  </para></listitem>
-               </varlistentry>
-            </variablelist>
-      </para>
-    </sect2>
-
-    <sect2 id="usage-mail-organize-folders">
-      <title>Getting Organized with Folders</title>
-      <para>
-	<application>Evolution</application> keeps mail, as well as
-	address cards and calendars, in folders.  You start out with a
-	few, like <guilabel>Inbox</guilabel>,
-	<guilabel>Outbox</guilabel>, and <guilabel>Drafts</guilabel>,
-	but you can create as many as you like.  Create new folders by
-	selecting <guisubmenu>New</guisubmenu> and then
-	<guimenuitem>Folder</guimenuitem> from the
-	<guimenu>File</guimenu> menu.
-	<application>Evolution</application> will as you for the name
-	and the type of the folder, and will provide you with a folder
-	tree so you can pick where it goes.
-      </para>
-      <para>
-        When you click <guibutton>OK</guibutton>, your new folder will
-	appear in the <interface>folder view</interface>.  You can
-	then put messages in it by dragging and dropping them, or by
-	using the <guibutton>Move</guibutton> button in the
-	toolbar. If you want to move several messages at once, click
-	on the ones you want to move while holding down the
-	<keycap>CTRL</keycap> key, or use <keycap>Shift</keycap> to
-	select a range of messages.  If you create a filter with the
-	<interface>filter assistant</interface>, you can have mail
-	moved to your folder automatically.
-      </para>
-        </sect2>    
-
-    <sect2 id="usage-mail-organize-search">
-      <title>Searching for Messages</title>
-      <para>
-	Most mail clients can search through your messages for you,
-	but <application>Evolution</application> does it faster. You
-	can search through just the message subjects, just the message
-	body, or both body and subject.
-      </para>
-      <para>
-	To start searching, enter a word or phrase in the text area
-	right below the toolbar, and choose a search type:
-	<variablelist>
-	  <varlistentry>
-	    <term><guilabel>Body or subject contains:</guilabel></term>
-	  <listitem>
-	      <para>
-	        This will search message subjects and the messages
-	        themselves for the word or phrase you've entered in
-	        the search field.
-   	      </para>
-	    </listitem>
-	  </varlistentry>
-	  <varlistentry>
-	    <term> <guilabel>Body contains:</guilabel> </term>
-	    <listitem>
-	      <para>
-	        This will search only in message text, not the subject
-	        lines.
-	      </para>
-	    </listitem>
-	  </varlistentry>
-	  <varlistentry>
-	    <term><guilabel>Subject contains:</guilabel></term>
-	    <listitem>
-	      <para>
-	        This will show you messages where the search text is
-	        in the subject line.  It will not search in the
-	        message body.
-	      </para>
-	    </listitem>
-	  </varlistentry>
-	  <varlistentry>
-	    <term><guilabel>Body does not contain:</guilabel></term>
-	    <listitem>
-	      <para>
-	        This finds every email message that does not have the
-	        search text in the message body.  It will still show
-	        messages that have the search text in the subject
-	        line, if it is not also in the body.
-	      </para>
-	    </listitem>
-	  </varlistentry>
-	  <varlistentry>
-	    <term><guilabel>Subject does not contain:</guilabel></term>
-	    <listitem>
-	      <para>
-	        This finds every mail whose subject does not contain
-	        the search text.
-	      </para>
-	    </listitem>
-	  </varlistentry>
-	</variablelist>
-
-        When you've entered your search phrase, press
-        <keycap>Enter</keycap>.  <application>Evolution</application>
-        will show your search results in the message list.
-      </para>
-
-      <para>
-         If you think you'll want to return to a search again, you can
-         save it as a virtual folder by selecting <guilabel>Store
-         Search as Virtual Folder</guilabel>.
-      </para>
-
-      <para>
-         When you're done with the search, go back to seeing all your
-         messages by choosing <guimenuitem>Show All</guimenuitem> from
-         the <guilabel>Search</guilabel> drop-down box. If you're
-         sneaky, just enter a blank search: since every message has at
-         least one space in it, you'll see every message in the
-         folder.
-      </para>
-
-      <para>
-        If you'd like to perform a more complex search, open the
-        advanced search dialog by selecting
-        <guilabel>Advanced...</guilabel> from the
-        <guilabel>Search</guilabel> drop-down menu.  Then, create your
-        search criteria (each with the same options you saw in the
-        regular search bar), and decide whether you want to find
-        messages that match all of them, or messages that match even
-        one. Then, click <guibutton>Search</guibutton> to go and find
-        those messages.
-     </para>
-
-     <para>
-        You'll see a similar approach to sorting messages when you
-        create filters and virtual folders in the next few sections.
-     </para>
-
-    </sect2>
-
-    <sect2 id="usage-mail-organize-filters">
-      <title>Staying organized: Mail Filters in Evolution</title>
-      <para>
-        I once worked in the mail room of a large company, where my
-        job was to bundle, sort, and distribute mail to the various
-        mail boxes and desks throughout the building.  Filters do that
-        same job with email, but they lose much less mail than I did.
-        In addition, you can have multiple filters performing multiple
-        actions that may effect the same message in several ways.  For
-        example, your filters could put copies of one message into
-        multiple folders, or keep a copy and send one to another
-        person as well, and it can do that in under a second. Which is
-        to say, it's faster and more flexible than an actual person
-        with a pile of envelopes.
-      </para>
-      <para>
-        Most often, you'll want to have
-        <application>Evolution</application> put mail into different
-        folders, but you can have it do almost anything you like.
-        People who get lots of mail, or who often need to refer to old
-        messages, find filters especially helpful, but they're good
-        for anybody who gets more than a few messages a day.  To
-        create a filter, open the <interface>filter
-        assistant</interface> by selecting
-	<menuchoice>
-	  <guimenu>Settings</guimenu> 
-          <guimenuitem>Mail Filters</guimenuitem>
-        </menuchoice>.
-      </para>
-            
-       <figure id="usage-mail-filters-fig-assist">
-	 <title>The Filter Assistant</title>
-	 <screenshot>
-	  <screeninfo>The Filter Assistant</screeninfo>
-	  <graphic fileref="fig/filter-assist-fig" format="png" srccredit="Aaron Weber">
-	</graphic>
-	</screenshot>
-      </figure>
-
-      <para>
-        The <interface>filter assistant</interface> window contains a
-        list of your current filters, sorted by the order in which
-        they are used.  From the drop-down box at the top of the
-        window, choose <guilabel>Incoming</guilabel> to display
-        filters for incoming mail, and <guilabel>Outgoing</guilabel>
-        for those which sort only outgoing mail.
-      </para>
-      <para>
-         The <interface>filter assistant</interface> also has a set of
-         buttons:
-        <itemizedlist>
-
-           <listitem><para>
-            <guibutton>Add</guibutton> &mdash; Create a new filter.
-           </para></listitem>
-
-           <listitem><para>
-            <guibutton>Edit</guibutton> &mdash; Edit an existing filter.
-           </para></listitem>
-
-           <listitem><para>
-            <guibutton>Delete</guibutton> &mdash; Delete the selected filter.
-           </para></listitem>
-
-           <listitem><para> <guibutton>Up</guibutton> &mdash; Move the
-            selected filter up in the list so it gets applied first.
-           </para></listitem>
-
-           <listitem><para>
-            <guibutton>Down</guibutton> &mdash;  Move the selected filter down 
-             in the list, so it comes into play later.
-           </para></listitem>
-        </itemizedlist>
-
-        If you don't have any filters set up, the only one of those
-        buttons you can click is <guibutton>Add</guibutton>, which
-        will open a dialog to let you add a filter rule.  If you do
-        have filters, you can either add a new filter rule, or select
-        one from your list and click <guibutton>Edit</guibutton>.
-      </para>
-      <para>
-        The filter rule editor, shown in <xref
-        linkend="usage-mail-filters-fig-new">, is where you'll
-        actually create your filtering rule.
-
-       <figure id="usage-mail-filters-fig-new">
-	 <title>Creating a new Filter</title>
-	 <screenshot>
-	  <screeninfo>Creating a new Filter</screeninfo>
-	  <graphic fileref="fig/filter-new-fig" format="png" srccredit="Aaron Weber">
-	</graphic>
-	</screenshot>
-      </figure>
-      </para>
-      <para>
-        Enter a name for your filter in the <guilabel>Rule
-        Name</guilabel> field, and then begin choosing the criteria
-        you'd like to use as you sort your mail.  Choose how many
-        criteria you'd like by pressing <guibutton>Add
-        Criterion</guibutton> and <guibutton>Remove
-        Criterion</guibutton>.  If you have multiple criteria, you
-        should then decide whether to have the filter do its job only
-        <guilabel>if all criteria are met</guilabel>, or <guilabel>if
-        any criteria are met</guilabel>.
-     </para>
-     <para>
-        For each filter criterion, you must first select what
-        part of the message you want the filter to examine:
-        <variablelist>
-	  <varlistentry>
-	    <term><guilabel>Sender</guilabel></term>
-	    <listitem><para>
-                The sender's address.
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Recipients</guilabel></term>
-	    <listitem><para>
-               The recipients of the message.
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Subject</guilabel></term>
-	    <listitem><para>
-                The subject line of the message.
-            </para></listitem>
-	  </varlistentry>
-
-
-	  <varlistentry>
-	    <term><guilabel>Specific Header</guilabel></term>
-	    <listitem><para>
-              The filter can look at any header you
-	      want, even obscure or custom ones. Enter the header name
-	      in the first text box, and put your search text in the
-	      second one.
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Message Body</guilabel></term>
-	    <listitem><para>
-                Search in the actual text of the message.
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Expression</guilabel></term>
-	    <listitem>
-             <para>
-               Enter a <glossterm linkend="regular-expression">regular
-	       expression</glossterm>, and
-	       <application>Evolution</application> will search the
-	       entire message, including headers, to match it for you.
-	     </para>
-           </listitem>
-	  </varlistentry>
-
-
-	  <varlistentry>
-	    <term><guilabel>Date Sent</guilabel></term>
-	    <listitem><para> Filter messages by when they were sent:
-	    First, choose the conditions you want a message to
-	    meet&mdash; <guilabel>before</guilabel> a given time,
-	    <guilabel>after</guilabel> it, and so forth.  Then, choose
-	    the time. The filter will compare the message's time-stamp
-	    to the system clock when the filter is run, or to a
-	    specific time and date you choose from a calendar.  You
-	    can even have it look for messages within a range of time
-	    relative to the filter&mdash perhaps you're looking for
-	    messages less than two days old.  </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Date Recieved</guilabel></term>
-	    <listitem><para>
-                This works the same way as the <guilabel>Date Sent</guilabel> 
-                option, except that it compares the time you got the message 
-                with the dates you specify.
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Priority</guilabel></term>
-	    <listitem><para>
-               Emails have a standard priority range from -3 (least
-               important) to 3 (most important). You can have filters set the
-               priority of messages you recieve, and then have other filters 
-               applied only to those messages which have a certain priority.
-            </para></listitem>
-           </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Regex Match</guilabel></term>
-	    <listitem>
-              <para>
-                If you know your way around a <glossterm
-  	        linkend="regular-expression">regex</glossterm>, or
-  	        regular expression, put your knowledge to use here.
-  	       </para>
-            </listitem>
-          </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Source</guilabel></term>
-	    <listitem>
-               <para>
-               Filter messages according the server you got them from.
-               You can enter a URL or choose one from the drop-down
-               list.  This ability is only relevant if you use more
-               than one mail source.
-             </para>
-            </listitem>
-	  </varlistentry>
-	</variablelist>
-      </para>
-        <para>
-        Now, tell it what to do with those messages.  If you want more
-        actions, click <guibutton>Add Action</guibutton>; if you want
-        fewer, click <guibutton>Remove Action</guibutton>.  And choose
-        again:
-        <variablelist>
-
-	  <varlistentry>
-	    <term><guilabel>Copy to Folder</guilabel></term>
-	    <listitem><para>
-               If you select this item, <application>Evolution</application>
-               will put the messages into a folder you specify.  Click the 
-               <guibutton>&lt;click here to select a folder&gt;</guibutton> button
-               to select a folder. 
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Move to Folder</guilabel></term>
-	    <listitem><para>
-               If you select this item, <application>Evolution</application>
-               will put the messages into a folder you specify.  Click the 
-               <guibutton>&lt;click here to select a folder&gt;</guibutton> button
-               to select a folder. 
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Forward to Address</guilabel></term>
-	    <listitem><para>
-                Select this, enter an address, and the addressee will
-                get a copy of the message.
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Delete</guilabel></term>
-	    <listitem><para>
-                Marks the message for deletion.  You can still get the message
-                back, at least until you <guimenuitem>Expunge</guimenuitem> your
-                mail yourself.
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Stop Processing</guilabel></term>
-	    <listitem><para>
-              Select this if you want to tell all other filters to ignore 
-              this message, because whatever you've done with it so far
-              is plenty.
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Assign Color</guilabel></term>
-	    <listitem><para>
-                Select this item, and <application>Evolution</application>
-                will mark the message with whatever color you please.
-            </para></listitem>
-	  </varlistentry>
-
-	  <varlistentry>
-	    <term><guilabel>Assign Score</guilabel></term>
-	    <listitem><para> If you know that all mail with
-	    "important" somewhere in the message body line is
-	    important, you can give it a high priority score. In a subsequent filter you can 
-            then arrange your messages by their priority score.
-	  </para></listitem>
-	  </varlistentry>
-
-	</variablelist>
-      </para>
-      <para>
-        You're done.  Click <guibutton>OK</guibutton> to use this
-        filter, or <guibutton>Cancel</guibutton> to close the window
-        without saving any changes.
-      </para>
-
-
-
-   <!-- FIXME: This needs to be in there.  But the feature is temporarily
-         disabled and I don't know how it will be reimplemented.
-
-	  <itemizedlist>
-	    <listitem>
-	       <para>
-		 <guilabel>When mail arrives:</guilabel> Select
-		 this option to have messages filtered as they
-		 arrive.
-	       </para>
-	     </listitem>
-	     <listitem>
-	       <para>
-		 <guilabel>When mail is sent:</guilabel> Select
-		 this option to filter your outgoing mail.  You
-		 can use this feature to keep your
-		 <interface>Outbox</interface> as organized as
-		 your <interface>Inbox</interface>.
-	     </para>
-	  </listitem>
-	</itemizedlist>
-      </para>
-
-    -->
-
-      <note>
-	<title>Two Notable Filter Features</title>
-	<para>
-	  <itemizedlist>
-	    <listitem><para>
-              Incoming email that your filters don't move goes into the Inbox; 
-              outgoing mail that they don't move ends up in the Sent folder.
-             </para>
-	    </listitem>
-
-	    <listitem><para>If you move a folder, your filters
-	    will follow it.  </para></listitem>
-	  </itemizedlist>
-	</para>
-      </note>
-    </sect2>
-
-
-
-    <sect2 id="usage-mail-organize-vFolders">
-      <title>Getting Really Organized with Virtual Folders</title>
-      <para>
-	If filters aren't flexible enough for you, or you find
-	yourself performing the same search again and again, consider
-	a virtual folder. Virtual folders, or vFolders, are an
-	advanced way of viewing your email messages within
-	<application>Evolution</application>.  If you get a lot of
-	mail or often forget where you put messages, virtual folders can help
-	you stay on top of things.
-      </para>
-      <para>
-	A virtual folder is really a hybrid of all the other organizational
-	tools: it looks like a folder, it acts like a search, and you
-	set it up like a filter.  In other words, while a conventional
-	folder actually contains messages, a virtual folder is a view of
-	messages that may be in several different folders.  The
-	messages it contains are determined on the fly using a set of
-	criteria you choose in advance.
-      </para>
-
-      <para>
-	As messages that meet the virtual folder criteria arrive or are
-	deleted, <application>Evolution</application> will
-	automatically place them in and remove them from the
-	virtual folder contents list.  When you delete a message, it gets
-	erased from the folder in which it actually exists, as well as
-	any virtual folders which display it.
-      </para>
-
-      <para>
-	Imagine a business trying to keep track of mail from hundreds
-	of vendors and clients, or a university with overlapping and
-	changing groups of faculty, staff, administrators and
-	students.  The more mail you need to organize, the less you
-	can afford the sort of confusion that stems from an
-	organizational system that's not flexible enough.  Virtual folders
-	make for better organization because they can accept
-	overlapping groups in a way that regular folders and filing
-	systems can't.
-      </para>
-
-      <example id="usage-mail-organize-vFolders-ex">
-	<title>Using Folders, Searches, and Virtual Folders</title>
-	<para>
-	   To organize my mail box, I set up a virtual folder for
-	   emails from my friend and co-worker Anna.  I have another
-	   one for messages that have "ximian.com" in the address and
-	   "Evolution" in the subject line, so I can keep a record of
-	   what people from work send me about
-	   <application>Evolution</application>.  If Anna sends me a
-	   message about anything other than Evolution, it only shows
-	   up in the "Anna" folder. When Anna sends me mail about the
-	   user interface for <application>Evolution</application>, I
-	   can see that message both in the "Anna" virtual folder and
-	   in the "Internal Evolution Discussion" virtual folder.
-	</para>
-      </example>
-
-	<!--  (INSERT SCREENSHOT HERE: virtual folders in action) -->
-
-      <para>
-	 To create a virtual folder, select <menuchoice>
-	 <guimenu>Settings</guimenu> <guimenuitem>Virtual Folder
-	 Editor</guimenuitem> </menuchoice>.  This will bring up a
-	 dialog box that looks suspiciously like the filter window
-	 (for more information on filters, see <xref
-	 linkend="usage-mail-organize-filters">), and which
-	 presents you with a list of virtual folders you have previously
-	 created. If you have created any virtual folders, they are listed
-	 here, and you can select, edit or remove them if you wish.
-	 If you have not created any, there will be only one available
-	 option: click <guibutton>Add</guibutton> to add a new
-	 Virtual Folder.
-      </para>
-      <para>
-	 You can enter a name for your virtual folder in the
-	 <guilabel>Name</guilabel>.  Then, tell
-	 <application>Evolution</application> what messages to look
-	 for.  This process is exactly like filter creation: decide
-	 between <guilabel>Match all parts</guilabel> and
-	 <guilabel>Match any part</guilabel>, then choose what part of
-	 the message to look in, what sort of matching to perform, and
-	 specify exactly what it is that you want to find, be it a
-	 line of text, a score, a regular expression, or a particular date or
-	 range of dates.
-       </para>
-       <para>
-         The second part, however, is slightly different.  In the
-         section of the window labelled <guilabel>Virtual Folder Sources
-         </guilabel> is a list of folders in which
-         <application>Evolution</application> will search for the
-         contents of your vFolder.  Click <guibutton>Add</guibutton>
-         to add a folder, or <guibutton>Remove</guibutton> to remove
-         one.  That way, you can have your vFolder search in
-         newsgroups, or just in one of your mailboxes, or just in a
-         select few folders you've already screened with filters.
-       </para>
-       <para>
-        The vFolder creation window is shown in <xref
-	linkend="usage-mail-vfolder-fig-createrule">
-
-       <figure id="usage-mail-vfolder-fig-createrule">
-	 <title>Selecting a vFolder Rule</title>
-	 <screenshot>
-	  <screeninfo>Creating a vFolder Rule</screeninfo>
-	  <graphic fileref="fig/vfolder-createrule-fig" format="png" srccredit="Aaron Weber">
-	</graphic>
-	</screenshot>
-      </figure>
-      </para>
-    </sect2>
-    <sect2 id="usage-mail-subscriptions">
-      <title>Subscription Management</title>
-      <para>
-         <application>Evolution</application> lets you handle your
-         IMAP and newsgroup subscriptions with the same tool: the
-         subscriptions manager.  To start using it, choose
-         <menuchoice> <guimenu>Settings</guimenu> <guimenuitem>Manage
-         Subscriptions</guimenuitem> </menuchoice>.
-      </para>
-      <para>
-         If you have configured any IMAP (mail) or NNTP (news)
-         servers, you will see them listed in the left half of the
-         subscription management window.  Click on a server to select
-         it, and you will see the folders or newsgroups available to
-         you.  You can then select individual folders and subscribe to
-         them, or remove yourself from the subscription list.
-      </para>
-      <para>
-        Once you have subscribed to a folder or newsgroup, your system
-        will check for new messages whenever you press the
-        <guibutton>Get Mail</guibutton> button.
-      </para>
-
-    </sect2>
-  </sect1>
-</chapter>
-
-