This commit was manufactured by cvs2svn to create tagGNOME-VFS_1_0_1

'GNOME-VFS_1_0_1'.

svn path=/tags/GNOME-VFS_1_0_1/; revision=9347

20 files changed, 0 insertions, 2058 deletions

diff --git a/devel-docs/.cvsignore b/devel-docs/.cvsignore
deleted file mode 100644
index d436efd0f7..0000000000
--- a/devel-docs/.cvsignore
+++ /dev/null
@@ -1,3 +0,0 @@
-Makefile.in
-Makefile
-
diff --git a/devel-docs/Makefile.am b/devel-docs/Makefile.am
deleted file mode 100644
index 74a5ff5b60..0000000000
--- a/devel-docs/Makefile.am
+++ /dev/null
@@ -1,3 +0,0 @@
-## Process this file with automake to produce Makefile.in
-
-SUBDIRS=camel
diff --git a/devel-docs/camel/.cvsignore b/devel-docs/camel/.cvsignore
deleted file mode 100644
index 56d9506207..0000000000
--- a/devel-docs/camel/.cvsignore
+++ /dev/null
@@ -1,12 +0,0 @@
-sgml
-html
-Makefile.in
-Makefile
-camel.signals
-camel.hierarchy
-camel.args
-camel-decl.txt
-camel-unused.txt
-camel.html
-camel-decl-list.txt
-
diff --git a/devel-docs/camel/Makefile.am b/devel-docs/camel/Makefile.am
deleted file mode 100644
index 276059cf88..0000000000
--- a/devel-docs/camel/Makefile.am
+++ /dev/null
@@ -1,101 +0,0 @@
-## Process this file with automake to produce Makefile.in
-
-# The name of the module.
-DOC_MODULE=camel
-
-# The top-level SGML file.
-DOC_MAIN_SGML_FILE=camel-docs.sgml
-
-# The directory containing the source code (if it contains documentation).
-DOC_SOURCE_DIR=$(top_srcdir)/camel
-
-CFLAGS=`gtk-config --cflags gtk`
-LDFLAGS="-lcamel `gtk-config --libs gtk` "
-
-
-HTML_DIR=$(datadir)/gnome/html
-
-
-
-TARGET_DIR=$(HTML_DIR)/$(DOC_MODULE)
-
-tmpl_sources =					\
-	tmpl/camel-data-wrapper.sgml		\
-	tmpl/camel-folder.sgml			\
-	tmpl/camel-mime-message.sgml		\
-	tmpl/camel-mime-part.sgml		\
-	tmpl/camel-recipient.sgml		\
-	tmpl/camel-service.sgml			\
-	tmpl/camel-store.sgml			\
-	tmpl/camel-stream.sgml		
-
-
-camel_docdir = $(HTML_DIR)
-camel_doc_DATA =				\
-	camel.html				\
-	camel.hierarchy			\
-	camel.types				\
-	camel-scan.c				\
-	camel-decl.txt			\
-	camel-sections.txt
-
-EXTRA_DIST = $(camel_doc_DATA)
-
-camel.html: html/book1.html
-	-cd $(srcdir) && cp html/book1.html camel.html
-
-html/book1.html: sgml/camel-doc.bottom
-	$(MAKE) html
-
-sgml/camel-doc.bottom: $(tmpl_sources)
-	$(MAKE) sgml
-
-camel-scan.c:
-
-scan: camel-scan.c				
-	CFLAGS=$(CFLAGS) LDFLAGS=$(LDFLAGS) gtkdoc-scanobj --module=$(DOC_MODULE)
-	gtkdoc-scan --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR)
-
-templates: scan
-	gtkdoc-mktmpl --module=$(DOC_MODULE)
-
-sgml: 
-	gtkdoc-mkdb --module=$(DOC_MODULE) --source-dir=$(DOC_SOURCE_DIR)
-
-html: 
-	if ! test -d html ; then mkdir html ; fi
-	-cd html && gtkdoc-mkhtml $(DOC_MODULE) ../$(DOC_MAIN_SGML_FILE)
-
-clean-local:
-	rm -f *~ *.bak *.hierarchy *.signals *.args *-unused.txt camel.html
-
-maintainer-clean-local: clean
-	rm -rf sgml html $(DOC_MODULE)-decl-list.txt $(DOC_MODULE)-decl.txt Makefile.in 
-
-install-data-local: 
-	$(mkinstalldirs) $(TARGET_DIR)
-	(installfiles=`echo $(srcdir)/html/*.html`; \
-	if test "$$installfiles" = '$(srcdir)/html/*.html'; \
-	then echo '-- Nothing to install' ; \
-	else \
-	  for i in $$installfiles; do \
-	    echo '-- Installing '$$i ; \
-	    $(INSTALL_DATA) $$i $(TARGET_DIR); \
-	  done; \
-	  echo '-- Installing $(srcdir)/html/index.sgml' ; \
-	  $(INSTALL_DATA) $(srcdir)/html/index.sgml $(TARGET_DIR); \
-	  echo '-- Fixing Crossreferences' ; \
-	  gtkdoc-fixxref --module=$(DOC_MODULE) --html-dir=$(HTML_DIR)|| true; \
-	fi)
-
-dist-hook:
-	mkdir $(distdir)/html
-	mkdir $(distdir)/sgml
-	mkdir $(distdir)/tmpl
-	-cp $(srcdir)/html/*.html $(srcdir)/html/*.css $(distdir)/html
-	-cp $(srcdir)/tmpl/*.sgml $(distdir)/tmpl
-	-cp $(srcdir)/sgml/*.sgml $(distdir)/sgml
-	-cp $(srcdir)/sgml/*.bottom $(srcdir)/sgml/*.top $(distdir)/sgml
-
-
-.PHONY : html sgml templates scan
diff --git a/devel-docs/camel/README_AND_TODO.txt b/devel-docs/camel/README_AND_TODO.txt
deleted file mode 100644
index 5feeb1e4e9..0000000000
--- a/devel-docs/camel/README_AND_TODO.txt
+++ /dev/null
@@ -1,43 +0,0 @@
-Camel is currently (conceptualy) separated in four parts:
-
-* the session handling 
-* the storage mechanism.
-* the (mime) message handling.
-* some general utilities class/functions.
-
-
-
-* Session handling 
-------------------
-
-(This is not gnome session managing related)
-CamelSession is an object used to store some parameters on a user
-basis. This can be a permanent (fs based) or volatile 
-(ram only) storage depending on user preferences. 
-The session object is, for example, responsible for 
-remembering authentication datas during application lifetime.
-It is also responsible for selecting and loading providers 
-corresponding to protocols. In the case where only one 
-provider exists for a given protocol, the task is trivial, 
-but when multiple providers exist for a given protocol, the
-user can choose their prefered one. Given its relationship
-with providers, the session object is also used to instanciate
-a store given an URL.
-
-Associated Classes:
-  CamelSession 
-    implementation: 5%
-
-Associated Files:
-  camel-provider.[ch]
-    implementation: 2.5% (a struct in camel-provider.h)
-
-
-* the storage mechanism.
-------------------------
-
-The storage mechanism is  mainly represented by 
-the Store class and the Folder class. 
-* the (mime) message handling.
-* some general utilities class/functions.
-
diff --git a/devel-docs/camel/camel-docs.sgml b/devel-docs/camel/camel-docs.sgml
deleted file mode 100644
index 33c6623731..0000000000
--- a/devel-docs/camel/camel-docs.sgml
+++ /dev/null
@@ -1,28 +0,0 @@
-<!doctype book PUBLIC "-//Davenport//DTD DocBook V3.0//EN" [
-<!entity CamelDataWrapper SYSTEM "sgml/camel-data-wrapper.sgml">
-<!entity CamelFolder SYSTEM "sgml/camel-folder.sgml">
-<!entity CamelMimeMessage SYSTEM "sgml/camel-mime-message.sgml">
-<!entity CamelMimePart SYSTEM "sgml/camel-mime-part.sgml">
-<!entity CamelRecipient SYSTEM "sgml/camel-recipient.sgml">
-<!entity CamelService SYSTEM "sgml/camel-service.sgml">
-<!entity CamelStore SYSTEM "sgml/camel-store.sgml">
-<!entity CamelStream SYSTEM "sgml/camel-stream.sgml">
-]>
-
-<book>
-  <bookinfo>
-    <title>Camel Messaging Library Reference Manual</title>
-  </bookinfo>
-
-  <chapter id="camel-objects">
-    <title>Camel Objects</title>
-    &CamelMimeMessage;
-    &CamelService;
-    &CamelStore;
-    &CamelFolder;
-    &CamelMimePart;
-    &CamelDataWrapper;
-    &CamelRecipient;
-
-  </chapter>
-</book>
diff --git a/devel-docs/camel/camel-sections.txt b/devel-docs/camel/camel-sections.txt
deleted file mode 100644
index 1f6d45c03c..0000000000
--- a/devel-docs/camel/camel-sections.txt
+++ /dev/null
@@ -1,154 +0,0 @@
-
-<INCLUDE>gnome.h</INCLUDE>
-<INCLUDE>camel-data-wrapper.h</INCLUDE>
-
-
-<SECTION>
-<FILE>camel-data-wrapper</FILE>
-CamelDataWrapper
-<TITLE>CamelDataWrapper</TITLE>
-camel_data_wrapper_write_to_stream
-<SUBSECTION Standard>
-CAMEL_DATA_WRAPPER
-camel_data_wrapper_get_type
-CAMEL_DATA_WRAPPER_CLASS
-</SECTION>
-
-<SECTION>
-<FILE>camel-recipient</FILE>
-CamelRecipientTable
-<TITLE>CamelRecipientTable</TITLE>
-camel_recipient_table_new
-camel_recipient_table_get
-camel_recipient_table_add
-camel_recipient_table_add_list
-camel_recipient_table_remove
-camel_recipient_table_ref
-camel_recipient_table_unref
-</SECTION>
-
-<SECTION>
-<FILE>camel-mime-part</FILE>
-CamelMimePart
-<TITLE>CamelMimePart</TITLE>
-camel_mime_part_add_header
-camel_mime_part_set_content_object
-camel_mime_part_set_filename
-camel_mime_part_get_disposition
-camel_mime_part_get_content_MD5
-camel_mime_part_get_encoding
-camel_mime_part_set_header_lines
-camel_mime_part_get_content_object
-camel_mime_part_get_content_id
-camel_mime_part_set_description
-camel_mime_part_set_text
-camel_mime_part_set_encoding
-camel_mime_part_set_disposition
-camel_mime_part_remove_header
-camel_mime_part_get_filename
-camel_mime_part_get_content_languages
-camel_mime_part_set_content_languages
-camel_mime_part_get_header_lines
-camel_mime_part_get_description
-camel_mime_part_get_header
-<SUBSECTION Standard>
-CAMEL_MIME_PART
-camel_mime_part_get_type
-CAMEL_MIME_PART_CLASS
-</SECTION>
-
-
-
-<SECTION>
-<FILE>camel-mime-message</FILE>
-CamelMimeMessage
-<TITLE>CamelMimeMessage</TITLE>
-camel_mime_message_remove_recipient
-camel_mime_message_get_recipients
-camel_mime_message_set_flag
-camel_mime_message_set_subject
-camel_mime_message_get_reply_to
-camel_mime_message_get_from
-camel_mime_message_set_reply_to
-camel_mime_message_get_sent_date
-camel_mime_message_new_with_session
-camel_mime_message_add_recipient
-camel_mime_message_get_subject
-camel_mime_message_set_from
-camel_mime_message_get_flag
-camel_mime_message_get_message_number
-camel_mime_message_get_received_date
-camel_mime_message_set_received_date
-<SUBSECTION Standard>
-CAMEL_MIME_MESSAGE
-camel_mime_message_get_type
-CAMEL_MIME_MESSAGE_CLASS
-</SECTION>
-
-
-<SECTION>
-<FILE>camel-folder</FILE>
-CamelFolder
-<TITLE>CamelFolder</TITLE>
-camel_folder_get_folder
-camel_folder_create
-camel_folder_delete
-camel_folder_delete_messages
-camel_folder_get_parent_folder
-camel_folder_get_parent_store
-camel_folder_get_mode
-camel_folder_list_subfolders
-<SUBSECTION Standard>
-CAMEL_FOLDER
-camel_folder_get_type
-CAMEL_FOLDER_CLASS
-</SECTION>
-
-<SECTION>
-<FILE>camel-service</FILE>
-CamelService
-<TITLE>CamelService</TITLE>
-camel_service_connect
-camel_service_is_connected
-camel_service_connect_to_with_login_passwd
-camel_service_connect_to_with_login_passwd_port
-camel_service_get_url
-<SUBSECTION Standard>
-CAMEL_SERVICE
-camel_service_get_type
-CAMEL_SERVICE_CLASS
-</SECTION>
-
-<SECTION>
-<FILE>camel-store</FILE>
-CamelStore
-<TITLE>CamelStore</TITLE>
-camel_store_get_separator
-camel_store_get_folder
-<SUBSECTION Standard>
-CAMEL_STORE
-camel_store_get_type
-CAMEL_STORE_CLASS
-</SECTION>
-
-
-<SECTION>
-<FILE>camel-stream</FILE>
-CamelStream
-<TITLE>CamelStream</TITLE>
-camel_stream_seek
-camel_stream_write
-camel_stream_flush
-camel_stream_eos
-camel_stream_write_string
-camel_stream_close
-camel_stream_write_strings
-camel_stream_read
-camel_stream_available
-<SUBSECTION Standard>
-CAMEL_STREAM
-camel_stream_get_type
-CAMEL_STREAM_CLASS
-</SECTION>
-
-
diff --git a/devel-docs/camel/camel.types b/devel-docs/camel/camel.types
deleted file mode 100644
index 93142d8692..0000000000
--- a/devel-docs/camel/camel.types
+++ /dev/null
@@ -1,9 +0,0 @@
-#include <gtk/gtk.h>
-#include <camel/camel-data-wrapper.h>
-camel_data_wrapper_get_type
-camel_folder_get_type
-camel_mime_message_get_type
-camel_mime_part_get_type
-camel_service_get_type
-camel_store_get_type
-camel_stream_get_type
diff --git a/devel-docs/camel/tmpl/.cvsignore b/devel-docs/camel/tmpl/.cvsignore
deleted file mode 100644
index 29db8d052d..0000000000
--- a/devel-docs/camel/tmpl/.cvsignore
+++ /dev/null
@@ -1,2 +0,0 @@
-camel-unused.sgml
-
diff --git a/devel-docs/camel/tmpl/camel-data-wrapper.sgml b/devel-docs/camel/tmpl/camel-data-wrapper.sgml
deleted file mode 100644
index 6fce9eb128..0000000000
--- a/devel-docs/camel/tmpl/camel-data-wrapper.sgml
+++ /dev/null
@@ -1,26 +0,0 @@
-<!-- ##### SECTION Title ##### -->
-CamelDataWrapper
-
-<!-- ##### SECTION Short_Description ##### -->
-data container with streaming methods
-
-<!-- ##### SECTION Long_Description ##### -->
-<para>
-A CamelDataWrapper is wrapper around data which can save them to a stream
-and restore them from a stream. 
-</para>
-
-<!-- ##### SECTION See_Also ##### -->
-<para>
-
-</para>
-
-<!-- ##### FUNCTION camel_data_wrapper_write_to_stream ##### -->
-<para>
-
-</para>
-
-@data_wrapper: 
-@stream: 
-
-
diff --git a/devel-docs/camel/tmpl/camel-folder.sgml b/devel-docs/camel/tmpl/camel-folder.sgml
deleted file mode 100644
index 882d63499c..0000000000
--- a/devel-docs/camel/tmpl/camel-folder.sgml
+++ /dev/null
@@ -1,96 +0,0 @@
-<!-- ##### SECTION Title ##### -->
-CamelFolder
-
-<!-- ##### SECTION Short_Description ##### -->
-Represents a folder of messages on a store.
-
-<!-- ##### SECTION Long_Description ##### -->
-<para>
-CamelFolder represents a folder in a message store. 
-</para>
-
-<!-- ##### SECTION See_Also ##### -->
-<para>
-
-</para>
-
-<!-- ##### STRUCT CamelFolder ##### -->
-<para>
-
-</para>
-
-
-<!-- ##### FUNCTION camel_folder_get_folder ##### -->
-<para>
-
-</para>
-
-@folder: 
-@folder_name: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_folder_create ##### -->
-<para>
-
-</para>
-
-@folder: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_folder_delete ##### -->
-<para>
-
-</para>
-
-@folder: 
-@recurse: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_folder_delete_messages ##### -->
-<para>
-
-</para>
-
-@folder: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_folder_get_parent_folder ##### -->
-<para>
-
-</para>
-
-@folder: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_folder_get_parent_store ##### -->
-<para>
-
-</para>
-
-@folder: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_folder_get_mode ##### -->
-<para>
-
-</para>
-
-@folder: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_folder_list_subfolders ##### -->
-<para>
-
-</para>
-
-@folder: 
-@Returns: 
-
-
diff --git a/devel-docs/camel/tmpl/camel-mime-message.sgml b/devel-docs/camel/tmpl/camel-mime-message.sgml
deleted file mode 100644
index 704f3d3572..0000000000
--- a/devel-docs/camel/tmpl/camel-mime-message.sgml
+++ /dev/null
@@ -1,171 +0,0 @@
-<!-- ##### SECTION Title ##### -->
-CamelMimeMessage
-
-<!-- ##### SECTION Short_Description ##### -->
-
-
-<!-- ##### SECTION Long_Description ##### -->
-<para>
-
-</para>
-
-<!-- ##### SECTION See_Also ##### -->
-<para>
-
-</para>
-
-<!-- ##### STRUCT CamelMimeMessage ##### -->
-<para>
-
-</para>
-
-
-<!-- ##### FUNCTION camel_mime_message_remove_recipient ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@recipient_type: 
-@recipient: 
-
-
-<!-- ##### FUNCTION camel_mime_message_get_recipients ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@recipient_type: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_message_set_flag ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@flag: 
-@value: 
-
-
-<!-- ##### FUNCTION camel_mime_message_set_subject ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@subject: 
-
-
-<!-- ##### FUNCTION camel_mime_message_get_reply_to ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_message_get_from ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_message_set_reply_to ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@reply_to: 
-
-
-<!-- ##### FUNCTION camel_mime_message_get_sent_date ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_message_new_with_session ##### -->
-<para>
-
-</para>
-
-@session: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_message_add_recipient ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@recipient_type: 
-@recipient: 
-
-
-<!-- ##### FUNCTION camel_mime_message_get_subject ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_message_set_from ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@from: 
-
-
-<!-- ##### FUNCTION camel_mime_message_get_flag ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@flag: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_message_get_message_number ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_message_get_received_date ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_message_set_received_date ##### -->
-<para>
-
-</para>
-
-@mime_message: 
-@received_date: 
-
-
diff --git a/devel-docs/camel/tmpl/camel-mime-part.sgml b/devel-docs/camel/tmpl/camel-mime-part.sgml
deleted file mode 100644
index 2db158b25f..0000000000
--- a/devel-docs/camel/tmpl/camel-mime-part.sgml
+++ /dev/null
@@ -1,151 +0,0 @@
-<!-- ##### SECTION Title ##### -->
-CamelMimePart
-
-<!-- ##### SECTION Short_Description ##### -->
-
-
-<!-- ##### SECTION Long_Description ##### -->
-<para>
-
-</para>
-
-<!-- ##### SECTION See_Also ##### -->
-<para>
-
-</para>
-
-<!-- ##### FUNCTION camel_mime_part_set_filename ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@filename: 
-
-
-<!-- ##### FUNCTION camel_mime_part_get_disposition ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_part_get_content_MD5 ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_part_get_encoding ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_part_set_header_lines ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@header_lines: 
-
-
-<!-- ##### FUNCTION camel_mime_part_get_content_id ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_part_set_description ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@description: 
-
-
-<!-- ##### FUNCTION camel_mime_part_set_text ##### -->
-<para>
-
-</para>
-
-@camel_mime_part: 
-@text: 
-
-
-<!-- ##### FUNCTION camel_mime_part_set_encoding ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@encoding: 
-
-
-<!-- ##### FUNCTION camel_mime_part_set_disposition ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@disposition: 
-
-
-<!-- ##### FUNCTION camel_mime_part_get_filename ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_part_get_content_languages ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_part_set_content_languages ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@content_languages: 
-
-
-<!-- ##### FUNCTION camel_mime_part_get_header_lines ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_mime_part_get_description ##### -->
-<para>
-
-</para>
-
-@mime_part: 
-@Returns: 
-
-
diff --git a/devel-docs/camel/tmpl/camel-recipient.sgml b/devel-docs/camel/tmpl/camel-recipient.sgml
deleted file mode 100644
index 4af84cf58e..0000000000
--- a/devel-docs/camel/tmpl/camel-recipient.sgml
+++ /dev/null
@@ -1,88 +0,0 @@
-<!-- ##### SECTION Title ##### -->
-CamelRecipientTable
-
-<!-- ##### SECTION Short_Description ##### -->
-
-
-<!-- ##### SECTION Long_Description ##### -->
-<para>
-
-</para>
-
-<!-- ##### SECTION See_Also ##### -->
-<para>
-
-</para>
-
-<!-- ##### STRUCT CamelRecipientTable ##### -->
-<para>
-
-</para>
-
-@recipient_hash_table: 
-@ref_count: 
-
-<!-- ##### FUNCTION camel_recipient_table_new ##### -->
-<para>
-
-</para>
-
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_recipient_table_unref ##### -->
-<para>
-
-</para>
-
-@recipient_table: 
-
-
-<!-- ##### FUNCTION camel_recipient_table_get ##### -->
-<para>
-
-</para>
-
-@recipient_table: 
-@recipient_type: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_recipient_table_add ##### -->
-<para>
-
-</para>
-
-@recipient_table: 
-@recipient_type: 
-@recipient: 
-
-
-<!-- ##### FUNCTION camel_recipient_table_remove ##### -->
-<para>
-
-</para>
-
-@recipient_table: 
-@recipient_type: 
-@recipient: 
-
-
-<!-- ##### FUNCTION camel_recipient_table_add_list ##### -->
-<para>
-
-</para>
-
-@recipient_table: 
-@recipient_type: 
-@recipient_list: 
-
-
-<!-- ##### FUNCTION camel_recipient_table_ref ##### -->
-<para>
-
-</para>
-
-@recipient_table: 
-
-
diff --git a/devel-docs/camel/tmpl/camel-service.sgml b/devel-docs/camel/tmpl/camel-service.sgml
deleted file mode 100644
index 5b51ea902e..0000000000
--- a/devel-docs/camel/tmpl/camel-service.sgml
+++ /dev/null
@@ -1,72 +0,0 @@
-<!-- ##### SECTION Title ##### -->
-CamelService
-
-<!-- ##### SECTION Short_Description ##### -->
-
-
-<!-- ##### SECTION Long_Description ##### -->
-<para>
-
-</para>
-
-<!-- ##### SECTION See_Also ##### -->
-<para>
-
-</para>
-
-<!-- ##### STRUCT CamelService ##### -->
-<para>
-
-</para>
-
-@e: 
-
-<!-- ##### FUNCTION camel_service_connect ##### -->
-<para>
-
-</para>
-
-@service: 
-
-
-<!-- ##### FUNCTION camel_service_is_connected ##### -->
-<para>
-
-</para>
-
-@service: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_service_connect_to_with_login_passwd ##### -->
-<para>
-
-</para>
-
-@service: 
-@host: 
-@login: 
-@passwd: 
-
-
-<!-- ##### FUNCTION camel_service_connect_to_with_login_passwd_port ##### -->
-<para>
-
-</para>
-
-@service: 
-@host: 
-@login: 
-@passwd: 
-@port: 
-
-
-<!-- ##### FUNCTION camel_service_get_url ##### -->
-<para>
-
-</para>
-
-@service: 
-@Returns: 
-
-
diff --git a/devel-docs/camel/tmpl/camel-store.sgml b/devel-docs/camel/tmpl/camel-store.sgml
deleted file mode 100644
index 2882c09986..0000000000
--- a/devel-docs/camel/tmpl/camel-store.sgml
+++ /dev/null
@@ -1,45 +0,0 @@
-<!-- ##### SECTION Title ##### -->
-CamelStore
-
-<!-- ##### SECTION Short_Description ##### -->
-
-A class representing a message (local or distant) repository
-
-<!-- ##### SECTION Long_Description ##### -->
-<para>
-The store class models a place where messages can be stored and retreived. It can be a local 
-store (for example an mbox-style store) or a distant server (for example an POP3 server). Messages are
-not retreived or stored directly with a CamelStore object. Instead, a CamelFolder object must be
-obtained from the store first. 
-</para>
-
-<!-- ##### SECTION See_Also ##### -->
-<para>
-
-</para>
-
-<!-- ##### STRUCT CamelStore ##### -->
-<para>
-
-</para>
-
-
-<!-- ##### FUNCTION camel_store_get_separator ##### -->
-<para>
-
-</para>
-
-@store: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_store_get_folder ##### -->
-<para>
-
-</para>
-
-@store: 
-@folder_name: 
-@Returns: 
-
-
diff --git a/devel-docs/camel/tmpl/camel-stream.sgml b/devel-docs/camel/tmpl/camel-stream.sgml
deleted file mode 100644
index e965db2e45..0000000000
--- a/devel-docs/camel/tmpl/camel-stream.sgml
+++ /dev/null
@@ -1,101 +0,0 @@
-<!-- ##### SECTION Title ##### -->
-CamelStream
-
-<!-- ##### SECTION Short_Description ##### -->
-
-
-<!-- ##### SECTION Long_Description ##### -->
-<para>
-
-</para>
-
-<!-- ##### SECTION See_Also ##### -->
-<para>
-
-</para>
-
-<!-- ##### FUNCTION camel_stream_seek ##### -->
-<para>
-
-</para>
-
-@stream: 
-@offset: 
-@policy: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_stream_write ##### -->
-<para>
-
-</para>
-
-@stream: 
-@buffer: 
-@n: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_stream_flush ##### -->
-<para>
-
-</para>
-
-@stream: 
-
-
-<!-- ##### FUNCTION camel_stream_eos ##### -->
-<para>
-
-</para>
-
-@stream: 
-@Returns: 
-
-
-<!-- ##### MACRO camel_stream_write_string ##### -->
-<para>
-
-</para>
-
-@stream: 
-@string: 
-
-
-<!-- ##### FUNCTION camel_stream_close ##### -->
-<para>
-
-</para>
-
-@stream: 
-
-
-<!-- ##### FUNCTION camel_stream_write_strings ##### -->
-<para>
-
-</para>
-
-@stream: 
-@Varargs: 
-
-
-<!-- ##### FUNCTION camel_stream_read ##### -->
-<para>
-
-</para>
-
-@stream: 
-@buffer: 
-@n: 
-@Returns: 
-
-
-<!-- ##### FUNCTION camel_stream_available ##### -->
-<para>
-
-</para>
-
-@stream: 
-@Returns: 
-
-
diff --git a/devel-docs/misc/ref_and_id_proposition.txt b/devel-docs/misc/ref_and_id_proposition.txt
deleted file mode 100644
index 2127b45a57..0000000000
--- a/devel-docs/misc/ref_and_id_proposition.txt
+++ /dev/null
@@ -1,237 +0,0 @@
-Author: Bertrand Guiheneuf <Bertrand.Guiheneuf@aful.org>
-Date: August 9th 1999
-Last revision date : September 3rd 1999
-Version: 0.2
-
-The last version of this document is always available in gnome CVS in
-the gnome-mailer module: devel-docs/misc/ref_and_id_proposition.txt
-
-
-
-A) Identifying messages within folders
---------------------------------------
-
-Currently, in Camel there is only one way to retrieve a message from a
-mail store:
-     CamelMimeMessage * 
-     get_message (CamelFolder *folder, gint number)
-
-where number is an integer representing the message rank within its
-parent folder.
-
-This is a traditional method (JavaMail, MAPI) and it is very useful
-because this is often the only way to get a message in from a
-classical store (pop3 for example).
-
-Moreover, various documents ([1], [2]) proposed to generalize the URL
-scheme used in Camel ([3]) to access mail stores in order to identify
-messages. Such an URL would be, for instance:
-
-pop3://po.myisp.com:1
-
-Meaning: "Access message 1 on Pop3 server po.myisp.com"
-
- 
-However, referencing a message with its number within a folder is a
-very unreliable method:
-
-1) Message order in a folder can change during a session: 
-   
-   The user can move or remove messages from the folder, thus
-   completely changing message numbers.  We could however imagine to
-   follow message operations in order to keep camel in a coherent
-   state at each time instant. This could be quite complex but may
-   be feasible using gtk signal system.
-
-2) Message order can change between sessions:
-
-   Gnome-mailer was designed from the begining to allow messages to be
-   stored in classical mailboxes (mbox, maildir, MH, IMAP ...), in
-   order to allow users to run other MUA on their mailboxes if
-   necessary.  These other MUA can change message order within folders
-   without any chance for Camel to trace the operations.
-   
-These two scenarii show that it is quite impossible to use reliable
-folder caching or message referencing if messages are referenced only
-by their position within their parent folder.
-   
-
-We thus have to find a general way to identify and retreive a message
-within its folder. One thing is sure, however: all folders
-implementation won't allow this method. Pop3 stores will always access
-messages using their rank on the server. MUA using Camel will thus
-have to be prepared to access some stores providing only the old
-fashionned message number access method.
-
-Basically, we have two choices:
-
-1) Accessing messages using (mailbox) Unique ID (UID)
-
-   A UID is a string identifier associated to a message, which is
-   guaranteed to be unique within its parent folder and which will not
-   change between sessions.
-
-2) Accessing messages using Message ID
-
-   A Message ID is a string identifier associated to a messages which
-   is guaranteed to be unique in the world, that is, no other message
-   can have the same Message ID. The message ID is defined in RFC 822,
-   and is stored as the message header "Message-id"
-   
-Method (1) already exists in IMAP.  
-It is quite simple to define on local stores (MH, mbox, ....) but it
-may not resist to message modification by other MUA.
-Methods based on Message-id matching or message content checksum seem
-to be the best one. Using an "X-" header is another possibility for
-non read-only folders. A combination of these three methods may be the
-most reliable solution.
-The UID is impossible to implement in a POP3 store provider.
-
-(2) Can be used with IMAP, but would be very ineficient. 
-The main issue with this method is its dependancy upon other MUAs and
-MTAs. Message-id is set before or during message transport. Moreover,
-some rfc822 compliant messages may not even have any Message-id
-header.
-These are major issues when accessing read-only stores.  
-The M-ID is also impossible to implement in a POP3 store provider.
-   
-
-We may not rely on external MUA and MTA to guarentee the uniqueness of
-the identifier . We may loose messages by never being able to read them
-if two had the same uid. It would be possible to find workarounds, but
-it could make Camel use a bit tricky.
-
-Given that most users will use IMAP or a database based store as their
-main mail store, and given that this stores allow UID very
-easily, I suggest that we use method (1). Discussion is still open,
-though.
-
-Here are the public methods I propose to add to CamelFolder:
-
-gboolean camel_folder_supports_uid (CamelFolder *folder)
-    returns true if the folder can get messages 
-    by their uid.
-
-gchar * camel_folder_get_uid_by_number (CamelFolder *folder, gint message_number)
-    return the uid of message which number in the folder
-    is %message_number.
-
-gchar * camel_folder_get_message_uid (CamelFolder *folder, CamelMimeMessage *message)
-    return the uid of the message within the folder.
-
-CamelMimeMessage *camel_folder_get_message_by_uid  (CamelFolder *folder, gchar *uid)
-    return the message which uid is %uid
-
-In addition, the CamelMessage Class will have a new public method
-
-gchar * camel_mime_message_get_uid (CamelMimeMessage *message) 
-    return the uid associated to the message in its physical parent
-    folder.
-
-
-
-B) Handling message references in (v)folders.
----------------------------------------------
- 
-
-We want the future Gnome mailer to be able to build (virtual) folders
-holding references to messages physically located in other
-folders. More generally, we would like folders to be able to hold:
-
-1) messages
-2) subfolders
-3) references to messages
-
-(1) and (2) are already implemented in Camel because most mail stores
-can hold messages and/or subfolders.
-
-(3) is a different issue, because no existing mail store can currently
-hold, within folders, references to messages in other folders.
-It will thus be a specific gnome-mailer extension. 
-
-
-One of the main issue is to determine what kind of behaviour we expect
-from folders holding references. Here is a possible API.
-
-( the world (v)folder is used to distinguish between the physical
-parent folder and the folder holding a reference to the message, when
-a confusion may arise)
-
-Addition to CamelFolder:
-
-gboolean camel_folder_can_hold_references (CamelFolder *folder)
-    return true if the folder can contain references
-
-void camel_folder_add_reference_by_uid (CamelFolder *folder, gchar *folder_url, gchar *message_uid)
-    add a reference into a folder. %folder_url is the url of 
-    the folder, %message_uid is the uid of the message within 
-    its physical parent folder.
- 
-void camel_folder_add_reference_by_message (CamelFolder *folder, CamelMessage *message)
-    add a reference. The place where the reference points 
-    to is found using CamelMessage methods
-
-void camel_folder_remove_reference_by_uid (CamelFolder *folder, gchar *uid)
-    remove a message reference form a folder. Reference 
-    is identified using its uid within the folder.
-
-gboolean camel_folder_uid_is_reference (CamelFolder *folder, gchar *uid)
-    return true if the message corresponding to the uid is a reference.
-
-Then all usual operations on the folder act if the message was
-actually physically stored in this folder. For example, when the mailer
-uses camel_folder_get_message_by_uid onto the (v)folder, the actual
-message is retreived from its physical store.
-
-As you can see, the uid of the message within its physical parent
-folder is different than its uid within the (v)folder. This is because
-there is no way to guarantee that the uids of two messages in two
-different folders would be different. Using references on this two
-message in the same vfolder would break uniqueness of the uid in the
-(v)folder.
-
-A couple of other methods could be defined but all the basics are
-described here.  
-
-This draft API is far from complete nor perfect, and is described here
-only to stimulate discussions before the actual implementation.
-
-
-The question now is to know how we store references. There are basically 
-two ways:
-
-1) references are stored using the URL of the physical folder
-   and the uid of the message within the folder
-
-2) a list of reference is kept, and in this list, reference are stored
-as in (1). Folders would refer to the actual message using index in
-the list
-
-
-   
-The main problem with (1) is that references get lost as soon
-as the actual message is moved. There is no way to find in which
-folders references to the message exist. 
-
-(2) is a way to solve this issue. When messages are used, Camel looks
-in the list to see if the message is refered somewhere, and actualize 
-the URL and the uid with their new values. 
-
-The problem with (2) is that we need to keep this information in a file
-and libraries writing automatically to files are generally a bad idea.
-
-As in additional remark, it is clear that Camel will only be able to
-hold references to messages on stores supporting UIDs.
-
-
-Thanks in advance for your comments and ideas,
-
-
-       Bertrand <Bertrand.Guiheneuf@aful.org>
-
-
---
-
-[1] : http://www.selequa.com/%7epurp/gnomail/mail2db.html 
-[2] : http://www.selequa.com/%7epurp/gnomail/dbRecFmt.html 
-[3] : http://www.gnome.org/mailing-lists/archives/gnome-mailer-list/1999-April/0248.shtml
diff --git a/devel-docs/query/virtual-folder-in-depth.sgml b/devel-docs/query/virtual-folder-in-depth.sgml
deleted file mode 100644
index d3e3e0504b..0000000000
--- a/devel-docs/query/virtual-folder-in-depth.sgml
+++ /dev/null
@@ -1,407 +0,0 @@
-<!doctype article PUBLIC "-//Davenport//DTD DocBook V3.0//EN" []>
-
-<!-- SGMLized by Bertrand <Bertrand.Guiheneuf@aful.org> -->
-
-<article id="index">
-  <artheader>
-    <authorgroup>
-      <author>
-	<firstname>Giao</firstname>
-	<surname>Nguyen</surname>
-      </author>
-    </authorgroup>
-
-    <title>An in-depth look at the virtual folder mechanism</title>
-    <abstract>
-      <para>
-	This document describes a different way of approaching mail
-	organization and how all things are possible in this brave new
-	world. This document does not describe physical storage issues
-	nor interface issues.
-      </para>
-      <para>
-	Historically mail has been organized into folders. These
-	folders usually mapped to a single storage medium. The
-	relationship between mail organization and storage medium was
-	one to one. There was one mail organization for every storage
-	medium. This scheme had its limitations.
-      </para>
-      <para>  
-	Efforts at categorizations are only meaningful at the instance that
-	one categorized. To find any piece of data, regardless of how well
-	it was categorized, required some amount of searching. Therefore, any
-	attempts to nullify searching is doomed to fail. It's time to embrace
-	searching as a way of life.
-      </para>
-      <para>  
-	These are the terms and their definitions. The example rules used are
-	based on the syntax for VM (http://www.wonderworks.com/vm/) by Kyle
-	Jones whose ideas form the basis for this. I'm only adding the
-	existence of summary files to aid in scaling. I currently use VM and
-	it's virtual-folder rules for my daily mail purposes. To date, my only 
-	complaints are speed (it has no caches) and for the unitiated, it's
-	not very user-friendly.
-      </para>
-      <para>  
-	Comments, questions, rants, etc. should be directed at Giao Nguyen
-	(grail@cafebabe.org) who will try to address issues in a timely
-	manner.
-      </para>
-    </abstract>
-  </artheader>
-
-  <!-- Definitions -->
-  <sect1 id="definitions">
-    <title>Definitions</title>
-    <sect2>
-      <title>Store</title> 
-      <para>
-	A location where mail can be found. This may be a file (Berkeley
-	mbox), directory (MH), IMAP server, POP3 server, Exchange server,
-	Lotus Notes server, a stack of Post-Its by your monitor fed through
-	some OCR system.
-      </para>
-    </sect2>
-
-    <sect2>
-      <title>Message</title> 
-      <para>  
-	An individual mail message.
-      </para>
-    </sect2>
-    <sect2>
-      <title>Vfolder</title> 
-      <para>  
-	A group of messages sharing some commonality. This is the result of a
-	query. The vfolder maybe contained in a store, but it is not necessary
-	that a store holds only one vfolder. There is always an implicit
-	vfolder rule which matches all messages. A store contains the vfolder
-	which is the result of the query (any). It's short for virtual folder
-	or maybe view folder. I dunno.
-      </para>
-    </sect2>
-    <sect2>
-      <title>Default-vfolder</title> 
-      <para>  
-	The vfolder defined by (any) applied to the store. This is not the
-	inbox. The inbox could easily be defined by a query. A default rule
-	for the inbox could be (new) but it doesn't have to be. Mine happens
-	to be (or (unread) (new)).
-      </para>
-    </sect2>
-    <sect2>
-      <title>Folder</title> 
-      <para>  
-	The classical mail folder approach: one message organization per
-	store.
-      </para>
-    </sect2>
-    <sect2>
-      <title>Query</title> 
-      <para>  
-	A search for messages. The result of this is a vfolder. There are two
-	kinds of queries: named queries and lambda queries. More on this
-	later.
-      </para>
-    </sect2>
-    <sect2>
-      <title>Summary file </title> 
-      <para>  
-	An external file that contains pointers to messages which are matches
-	for a named query. In addition to pointers, the summary file should
-	also contain signatures of the store for sanity checks. When the term
-	"index" is used as a verb, it means to build a summary file for a
-	given name-value pair.
-      </para>
-    </sect2>
-  </sect1>
-
-  <!-- Queries -->
-  <sect1>
-    <title>Queries</title> 
-    <para>  
-      Named queries are analogous to classical mail folders. Because named
-      queries maybe reused, summary files are kept as caches to reduce
-      the overall cost of viewing a vfolder. Summary files are superior to
-      folders in that they allow for the same messages to appear in multiple
-      vfolders without message duplications. Duplications of messages
-      defeats attempts at tagging a message with additional user information
-      like annotations. Named queries will define folders.
-    </para>
-    <para>
-      Lambda queries are similar to named queries except that they have no
-      name. These are created on the fly by the user to filter out or
-      include certain messages.
-    </para>
-    <para>
-      All queries can be layered on top of each other. A lambda query can be 
-      layered on a named query and a named query can be layered on a lambda
-      query. The possibilities are endless.
-    </para>
-    <para>
-      The layerings can be done as boolean operations (and, or, not). Short
-      circuiting should be used. 
-    </para>
-    <para>
-      Examples:
-      <programlisting>
-(and (author "Giao")
-  (unread))
-      </programlisting>
-      The (unread) query should only be evaluated on the results of (author
-      "Giao").
-      <programlisting>
-(or (author "Giao")
-  (unread))
-      </programlisting>
-      Both of these queries should be evaluated. Any matches are added to the
-      resulting vfolder.
-    </para>
-  </sect1>
-
-  <!-- Summary files -->
-  <sect1>
-    <title>Summary files</title> 
-    <para>    
-      Summary files are only meaningful when applied to the context of the
-      default-vfolder of a store.
-    </para>
-    <para>
-      Summary files should be generated for queries of the form:
-      <programlisting>
-(function "constant value")
-      </programlisting>
-      Summary files should never be generated for queries of the form:
-      <programlisting>
-	(function (function1))
-	
-	(and (function "value")
-	(another-function "another value"))
-      </programlisting>
-      Given a query of the form:
-      <programlisting>
-	(and (function "value")
-	(another-function "another value"))
-      </programlisting>
-      The system should use one summary file for (function "value") and
-      another summary file for (another-function "another value"). I will
-      call the prior form the "plain form".
-    </para>
-    <para>
-      It should be noted that the signature of the store should be based on
-      the assumption that new data may have been added to the store since
-      the application generated the summary file. Signatures generated on
-      the entirety of the store will most likely be meaningless for things
-      like POP/IMAP servers. 
-    </para>
-  </sect1>
-
-  <!-- Incremental Indexing -->
-  <sect1>
-    <title>Incremental indexing</title> 
-    <para>
-      When new messages are detected, all known queries should be evaluated
-      on the new messages. vfolders should be notified of new messages that
-      are positive matches for their queries. The indexes generated by this
-      process should be merged into the current indexes for the vfolder.
-    </para>
-  </sect1>
-
-  <!-- Can I have multiple stores -->
-  <sect1>
-    <title>Can I have multiple stores?</title> 
-    <para> 
-      I don't see why not. Again, the inbox is a vfolder so you can get a
-      unified inbox consisting of all new mail sent to all your stores or
-      your can get inboxes for each store or any combination your heart
-      desire. You get your cake, eat it, and someone else cleans the dishes!
-    </para>
-  </sect1>
-
-  <!-- Why all this? -->
-  <sect1>
-    <title>Why all this?</title> 
-    <para> 
-      Consider the dynamic nature of the following query:
-      <programlisting>
-(and (author "Giao")
-  (sent-after (today-midnight)))
-      </programlisting>
-      today-midnight would be a function that is evaluated at run-time to
-      calculate the appropriate object.
-    </para>
-  </sect1>
-
-  <!-- Scenarios of usage and their solutions -->
-  <sect1>
-    <title>Scenarios of usage and their solutions</title> 
-    <sect2>
-      <title>Mesage alterations</title>
-      <para>
-	This is a fuzzy area that should be left to the UI to handle. Messages 
-	are altered. Read status are altered when a new message is read for
-	example. How do we handle this if our query is for unread messages?
-	Upon viewing the state would change.
-      </para>
-      <para>
-	One idea is to not evaluate the queries unless we're changing between
-	vfolder views. This assumes that one can only view a particular
-	vfolder at a time. For multi-vfolder viewing, a message change should
-	propagate through the vfolder system. Certain effects (as in our
-	example) would not be intuitive.
-      </para>
-      <para> 
-	It would not be a clean solution to make special cases but they may be 
-	necessary where certain defined fields are ignored when they are
-	changed. Some combination of the above rules can be used. I don't
-	think it's an easy solution.
-      </para>
-    </sect2>
-    <sect2>
-      <title>Message inclusion and exclusion</title>
-      <para>
-	Messages are included and excluded also with queries. The final query
-	will have the form of:
-	<programlisting>
-	  (and (author "Giao")
-	  (criteria value)
-	  (not (criteria other-value)))
-	</programlisting>
-	Userland criterias may be a label of some sort. These may be userland
-	labels or Message-IDs. What are the performance issues involved in
-	this? With short circuiting, it's not a major problem.
-      </para>
-      <para>    
-	The criterias and values are determined by the UI. The vfolder
-	mechanism isn't concerned with such issues.
-      </para>
-      <para>   
-	Messages can be included and excluded at will. The idea is often
-	called "arbitrary inclusion/exclusion". This can be done by
-	Message-IDs or other fields. It's been noted that Message-IDs are not
-	unique. 
-      </para>
-      <para>  
-	I propose that any given vfolder is allocated an inclusion label and an 
-	exclusion label. These should be randomly generated. This should be
-	part of the vfolder description. It should be noted that the vfolder
-	description has not been drafted yet.
-      </para>
-      <para>   
-	The result is such that the rules for a given named query is:
-	<programlisting>
-	  (and (user-query)
-	  (label inclusion-label)
-	  (not exclusion-label))
-	</programlisting>
-      </para>
-    </sect2>
-    <sect2>
-      <title>Query scheduling</title>
-      <para>
-	Consider the following extremely dynamic queries:
-	<programlisting>
-	  A:
-	  (and (author "Giao")
-	  (sent-after (today-midnight)))
-	  
-	  B:
-	  (and (sent-after (today-midnight))
-	  (author "Giao"))
-	  
-	  C:
-	  (or (author "Giao")
-	  (sent-after (today-midnight)))
-	</programlisting>
-	Query A would be significantly faster because (author "Giao") is not
-	dynamic. A summary file could be generated for this query. Query B is
-	slow and can be optimized if there was a query compiler of some
-	sort. Query C demonstrates a query in which there is no good
-	optimization which can be applied. These come with a certain amount of
-	baggage.
-      </para>
-      <para>
-	It seems then that for boolean 'and' operations, plain forms should be 
-	moved forward and other queries should be moved such that they are
-	evaluated later. I would expect that the majority of queries would be
-	of the plain form.
-      </para>
-      <para>  
-	First is that the summary file is tied to the query and the store
-	where the query originates from. Second, a hashing function for
-	strings needs to be calculated for the query so that the query and the 
-	summary file can be associated. This hashing function could be similar 
-	to the hashing function described in Rob Pike's "The Practice of
-	Programming". (FIXME: Stick page number here)
-      </para>
-    </sect2>
-    <sect2>
-      <title>Archives</title>
-      <para>
-	Many people are concerned that archives won't be preserved, archives
-	aren't supported, and many other archive related issues. This is the
-	short version.
-      </para>
-      <para>    
-	Archives are just that, archives. Archives are stores. Take your
-	vfolder, export it to a store. You are done. If you load up the store
-	again, then the default-vfolder of that store is the view of the
-	vfolder, except the query is different.
-      </para>
-      <para>    
-	The point to vfolder is not to do away with classical folder
-	representation but to move the queries to the front where it would
-	make data management easier for people who don't think in terms of
-	files but in terms of queries because ordinary people don't think in
-	terms of files.
-      </para>    
-    </sect2>
-  </sect1>
-
-  <!-- Miscellany -->
-  <sect1>
-    <title>Miscellany</title>
-    <sect2>
-      <title>Annotations</title>
-      <para>
-	There should be a scheme to add annotations to messages. Common mail
-	user agents have used a tag in the message header to mark messages as
-	read/unread for example. Extending on this we have the ability to add
-	our own data to a message to add meaning to it. If we have a good
-	scheme for doing this, new possibilities are opened.
-      </para>
-      <sect3>
-	<title>Keywords</title>  
-	<para>
-	  When sending a message, a message could have certain keywords attached 
-	  to it. While this can be done with the subject line, the subject line
-	  has a tendency to be munged by other mail applications. One popular
-	  example is the "[rR]e:" prefix. Using the subject line also breaks the 
-	  "contract" with other mail user agents. Using keywords in another
-	  field in the message header allows the sender to assist the recipient
-	  in organizing data automatically. Note that the sender can only
-	  provide hints as the sender is unlikely to know the organization
-	  schemes of the recipient.
-	</para>
-      </sect3>
-    </sect2>
-    <sect2>
-      <title>Scope</title>  
-      <para>
-	Let us assume that we have multiple stores. Does a query work on a
-	given store? Or does it work on all stores? Or is it configurable such 
-	that a query can work on a user-selected list of stores?
-      </para>
-    </sect2>
-  </sect1>
-
-  <!-- Alternatives to the above -->
-  <sect1>
-    <title>Alternatives to the above</title>
-    <para>
-      Jim Meyer (purp@selequa.com) is putting some notes on where
-      annotations needs to be located. They'll be located here as well as
-      any contributions I may have to them.
-    </para>
-  </sect1>
-</article>
diff --git a/devel-docs/query/virtual-folder-in-depth.txt b/devel-docs/query/virtual-folder-in-depth.txt
deleted file mode 100644
index 01718a5f05..0000000000
--- a/devel-docs/query/virtual-folder-in-depth.txt
+++ /dev/null
@@ -1,309 +0,0 @@
-TITLE: An in-depth look at the virtual folder mechanism
-AUTHOR: Giao Nguyen <grail@cafebabe.org>
-
-* introduction
-
-This document describes a different way of approaching mail
-organization and how all things are possible in this brave new
-world. This document does not describe physical storage issues nor
-interface issues.
-
-Historically mail has been organized into folders. These folders
-usually mapped to a single storage medium. The relationship between
-mail organization and storage medium was one to one. There was one
-mail organization for every storage medium. This scheme had its
-limitations.
-
-Efforts at categorizations are only meaningful at the instance that
-one categorized. To find any piece of data, regardless of how well
-it was categorized, required some amount of searching. Therefore, any
-attempts to nullify searching is doomed to fail. It's time to embrace
-searching as a way of life.
-
-These are the terms and their definitions. The example rules used are
-based on the syntax for VM (http://www.wonderworks.com/vm/) by Kyle
-Jones whose ideas form the basis for this. I'm only adding the
-existence of summary files to aid in scaling. I currently use VM and
-it's virtual-folder rules for my daily mail purposes. To date, my only 
-complaints are speed (it has no caches) and for the unitiated, it's
-not very user-friendly.
-
-Comments, questions, rants, etc. should be directed at Giao Nguyen
-<grail@cafebabe.org> who will try to address issues in a timely
-manner.
-
-* Definitions
-
-** store 
-
-A location where mail can be found. This may be a file (Berkeley
-mbox), directory (MH), IMAP server, POP3 server, Exchange server,
-Lotus Notes server, a stack of Post-Its by your monitor fed through
-some OCR system.
-
-** message 
-
-An individual mail message.
-
-** vfolder 
-
-A group of messages sharing some commonality. This is the result of a
-query. The vfolder maybe contained in a store, but it is not necessary
-that a store holds only one vfolder. There is always an implicit
-vfolder rule which matches all messages. A store contains the vfolder
-which is the result of the query (any). It's short for virtual folder
-or maybe view folder. I dunno.
-
-** default-vfolder 
-
-The vfolder defined by (any) applied to the store. This is not the
-inbox. The inbox could easily be defined by a query. A default rule
-for the inbox could be (new) but it doesn't have to be. Mine happens
-to be (or (unread) (new)).
-
-** folder 
-
-The classical mail folder approach: one message organization per
-store.
-
-** query 
-
-A search for messages. The result of this is a vfolder. There are two
-kinds of queries: named queries and lambda queries. More on this
-later.
-
-** summary file 
-
-An external file that contains pointers to messages which are matches
-for a named query. In addition to pointers, the summary file should
-also contain signatures of the store for sanity checks. When the term
-"index" is used as a verb, it means to build a summary file for a
-given name-value pair.
-
-* Queries
-
-Named queries are analogous to classical mail folders. Because named
-queries maybe reused, summary files are kept as caches to reduce
-the overall cost of viewing a vfolder. Summary files are superior to
-folders in that they allow for the same messages to appear in multiple
-vfolders without message duplications. Duplications of messages
-defeats attempts at tagging a message with additional user information
-like annotations. Named queries will define folders.
-
-Lambda queries are similar to named queries except that they have no
-name. These are created on the fly by the user to filter out or
-include certain messages.
-
-All queries can be layered on top of each other. A lambda query can be 
-layered on a named query and a named query can be layered on a lambda
-query. The possibilities are endless.
-
-The layerings can be done as boolean operations (and, or, not). Short
-circuiting should be used. 
-
-Examples:
-
-(and (author "Giao")
-     (unread))
-
-The (unread) query should only be evaluated on the results of (author
-"Giao").
-
-(or (author "Giao")
-    (unread))
-
-Both of these queries should be evaluated. Any matches are added to the
-resulting vfolder.
-
-* Summary files
-
-Summary files are only meaningful when applied to the context of the
-default-vfolder of a store.
-
-Summary files should be generated for queries of the form:
-
-(function "constant value")
-
-Summary files should never be generated for queries of the form:
-
-(function (function1))
-
-(and (function "value")
-     (another-function "another value"))
-
-Given a query of the form:
-
-(and (function "value")
-     (another-function "another value"))
-
-The system should use one summary file for (function "value") and
-another summary file for (another-function "another value"). I will
-call the prior form the "plain form".
-
-It should be noted that the signature of the store should be based on
-the assumption that new data may have been added to the store since
-the application generated the summary file. Signatures generated on
-the entirety of the store will most likely be meaningless for things
-like POP/IMAP servers. 
-
-* Incremental indexing
-
-When new messages are detected, all known queries should be evaluated
-on the new messages. vfolders should be notified of new messages that
-are positive matches for their queries. The indexes generated by this
-process should be merged into the current indexes for the vfolder.
-
-* Can I have multiple stores?
-
-I don't see why not. Again, the inbox is a vfolder so you can get a
-unified inbox consisting of all new mail sent to all your stores or
-your can get inboxes for each store or any combination your heart
-desire. You get your cake, eat it, and someone else cleans the dishes!
-
-* Why all this?
-
-Consider the dynamic nature of the following query:
-
-(and (author "Giao")
-     (sent-after (today-midnight)))
-
-today-midnight would be a function that is evaluated at run-time to
-calculate the appropriate object.
-
-* Scenarios of usage and their solutions
-
-** Mesage alterations
-
-This is a fuzzy area that should be left to the UI to handle. Messages 
-are altered. Read status are altered when a new message is read for
-example. How do we handle this if our query is for unread messages?
-Upon viewing the state would change.
-
-One idea is to not evaluate the queries unless we're changing between
-vfolder views. This assumes that one can only view a particular
-vfolder at a time. For multi-vfolder viewing, a message change should
-propagate through the vfolder system. Certain effects (as in our
-example) would not be intuitive.
-
-It would not be a clean solution to make special cases but they may be 
-necessary where certain defined fields are ignored when they are
-changed. Some combination of the above rules can be used. I don't
-think it's an easy solution.
-
-** Message inclusion and exclusion
-
-Messages are included and excluded also with queries. The final query
-will have the form of:
-
-(and (author "Giao")
-     (criteria value)
-     (not (criteria other-value)))
-
-Userland criterias may be a label of some sort. These may be userland
-labels or Message-IDs. What are the performance issues involved in
-this? With short circuiting, it's not a major problem.
-
-The criterias and values are determined by the UI. The vfolder
-mechanism isn't concerned with such issues.
-
-Messages can be included and excluded at will. The idea is often
-called "arbitrary inclusion/exclusion". This can be done by
-Message-IDs or other fields. It's been noted that Message-IDs are not
-unique. 
-
-I propose that any given vfolder is allocated an inclusion label and an 
-exclusion label. These should be randomly generated. This should be
-part of the vfolder description. It should be noted that the vfolder
-description has not been drafted yet.
-
-The result is such that the rules for a given named query is:
-
-(and (user-query)
-     (label inclusion-label)
-     (not exclusion-label))
-
-** Query scheduling
-
-Consider the following extremely dynamic queries:
-
-A:
-(and (author "Giao")
-     (sent-after (today-midnight)))
-
-B:
-(and (sent-after (today-midnight))
-     (author "Giao"))
-
-C:
-(or (author "Giao")
-    (sent-after (today-midnight)))
-
-Query A would be significantly faster because (author "Giao") is not
-dynamic. A summary file could be generated for this query. Query B is
-slow and can be optimized if there was a query compiler of some
-sort. Query C demonstrates a query in which there is no good
-optimization which can be applied. These come with a certain amount of
-baggage.
-
-It seems then that for boolean 'and' operations, plain forms should be 
-moved forward and other queries should be moved such that they are
-evaluated later. I would expect that the majority of queries would be
-of the plain form.
-
-First is that the summary file is tied to the query and the store
-where the query originates from. Second, a hashing function for
-strings needs to be calculated for the query so that the query and the 
-summary file can be associated. This hashing function could be similar 
-to the hashing function described in Rob Pike's "The Practice of
-Programming". (FIXME: Stick page number here)
-
-** Archives
-
-Many people are concerned that archives won't be preserved, archives
-aren't supported, and many other archive related issues. This is the
-short version.
-
-Archives are just that, archives. Archives are stores. Take your
-vfolder, export it to a store. You are done. If you load up the store
-again, then the default-vfolder of that store is the view of the
-vfolder, except the query is different.
-
-The point to vfolder is not to do away with classical folder
-representation but to move the queries to the front where it would
-make data management easier for people who don't think in terms of
-files but in terms of queries because ordinary people don't think in
-terms of files.
-
-* Miscellany
-
-** Annotations
-
-There should be a scheme to add annotations to messages. Common mail
-user agents have used a tag in the message header to mark messages as
-read/unread for example. Extending on this we have the ability to add
-our own data to a message to add meaning to it. If we have a good
-scheme for doing this, new possibilities are opened.
-
-*** Keywords
-
-When sending a message, a message could have certain keywords attached 
-to it. While this can be done with the subject line, the subject line
-has a tendency to be munged by other mail applications. One popular
-example is the "[rR]e:" prefix. Using the subject line also breaks the 
-"contract" with other mail user agents. Using keywords in another
-field in the message header allows the sender to assist the recipient
-in organizing data automatically. Note that the sender can only
-provide hints as the sender is unlikely to know the organization
-schemes of the recipient.
-
-** Scope
-
-Let us assume that we have multiple stores. Does a query work on a
-given store? Or does it work on all stores? Or is it configurable such 
-that a query can work on a user-selected list of stores?
-
-* Alternatives to the above
-
-Jim Meyer <purp@selequa.com> is putting some notes on where
-annotations needs to be located. They'll be located here as well as
-any contributions I may have to them.