aboutsummaryrefslogtreecommitdiffstats
path: root/accounts/usbwallet/ledger_wallet.go
diff options
context:
space:
mode:
Diffstat (limited to 'accounts/usbwallet/ledger_wallet.go')
-rw-r--r--accounts/usbwallet/ledger_wallet.go460
1 files changed, 309 insertions, 151 deletions
diff --git a/accounts/usbwallet/ledger_wallet.go b/accounts/usbwallet/ledger_wallet.go
index 4f848aebd..b57a6f741 100644
--- a/accounts/usbwallet/ledger_wallet.go
+++ b/accounts/usbwallet/ledger_wallet.go
@@ -90,26 +90,47 @@ type ledgerWallet struct {
accounts []accounts.Account // List of derive accounts pinned on the Ledger
paths map[common.Address]accounts.DerivationPath // Known derivation paths for signing operations
- selfDeriveNextPath accounts.DerivationPath // Next derivation path for account auto-discovery
- selfDeriveNextAddr common.Address // Next derived account address for auto-discovery
- selfDerivePrevZero common.Address // Last zero-address where auto-discovery stopped
- selfDeriveChain ethereum.ChainStateReader // Blockchain state reader to discover used account with
- selfDeriveTime time.Time // Timestamp of the last self-derivation to avoid thrashing
-
- quit chan chan error
- lock sync.RWMutex
+ deriveNextPath accounts.DerivationPath // Next derivation path for account auto-discovery
+ deriveNextAddr common.Address // Next derived account address for auto-discovery
+ deriveChain ethereum.ChainStateReader // Blockchain state reader to discover used account with
+ deriveReq chan chan struct{} // Channel to request a self-derivation on
+ deriveQuit chan chan error // Channel to terminate the self-deriver with
+
+ healthQuit chan chan error
+
+ // Locking a hardware wallet is a bit special. Since hardware devices are lower
+ // performing, any communication with them might take a non negligible amount of
+ // time. Worse still, waiting for user confirmation can take arbitrarily long,
+ // but exclusive communication must be upheld during. Locking the entire wallet
+ // in the mean time however would stall any parts of the system that don't want
+ // to communicate, just read some state (e.g. list the accounts).
+ //
+ // As such, a hardware wallet needs two locks to function correctly. A state
+ // lock can be used to protect the wallet's software-side internal state, which
+ // must not be held exlusively during hardware communication. A communication
+ // lock can be used to achieve exclusive access to the device itself, this one
+ // however should allow "skipping" waiting for operations that might want to
+ // use the device, but can live without too (e.g. account self-derivation).
+ //
+ // Since we have two locks, it's important to know how to properly use them:
+ // - Communication requires the `device` to not change, so obtaining the
+ // commsLock should be done after having a stateLock.
+ // - Communication must not disable read access to the wallet state, so it
+ // must only ever hold a *read* lock to stateLock.
+ commsLock chan struct{} // Mutex (buf=1) for the USB comms without keeping the state locked
+ stateLock sync.RWMutex // Protects read and write access to the wallet struct fields
}
// URL implements accounts.Wallet, returning the URL of the Ledger device.
func (w *ledgerWallet) URL() accounts.URL {
- return *w.url
+ return *w.url // Immutable, no need for a lock
}
// Status implements accounts.Wallet, always whether the Ledger is opened, closed
// or whether the Ethereum app was not started on it.
func (w *ledgerWallet) Status() string {
- w.lock.RLock()
- defer w.lock.RUnlock()
+ w.stateLock.RLock() // No device communication, state lock is enough
+ defer w.stateLock.RUnlock()
if w.failure != nil {
return fmt.Sprintf("Failed: %v", w.failure)
@@ -124,25 +145,29 @@ func (w *ledgerWallet) Status() string {
}
// offline returns whether the wallet and the Ethereum app is offline or not.
+//
+// The method assumes that the state lock is held!
func (w *ledgerWallet) offline() bool {
return w.version == [3]byte{0, 0, 0}
}
// failed returns if the USB device wrapped by the wallet failed for some reason.
// This is used by the device scanner to report failed wallets as departed.
+//
+// The method assumes that the state lock is *not* held!
func (w *ledgerWallet) failed() bool {
- w.lock.RLock()
- defer w.lock.RUnlock()
+ w.stateLock.RLock() // No device communication, state lock is enough
+ defer w.stateLock.RUnlock()
return w.failure != nil
}
// Open implements accounts.Wallet, attempting to open a USB connection to the
-// Ledger hardware wallet. The Ledger does not require a user passphrase so that
-// is silently discarded.
+// Ledger hardware wallet. The Ledger does not require a user passphrase, so that
+// parameter is silently discarded.
func (w *ledgerWallet) Open(passphrase string) error {
- w.lock.Lock()
- defer w.lock.Unlock()
+ w.stateLock.Lock() // State lock is enough since there's no connection yet at this point
+ defer w.stateLock.Unlock()
// If the wallet was already opened, don't try to open again
if w.device != nil {
@@ -199,19 +224,26 @@ func (w *ledgerWallet) Open(passphrase string) error {
}
// Wallet seems to be successfully opened, guess if the Ethereum app is running
w.device, w.input, w.output = device, input, output
+ w.commsLock = make(chan struct{}, 1)
+ w.commsLock <- struct{}{} // Enable lock
w.paths = make(map[common.Address]accounts.DerivationPath)
- w.quit = make(chan chan error)
+
+ w.deriveReq = make(chan chan struct{})
+ w.deriveQuit = make(chan chan error)
+ w.healthQuit = make(chan chan error)
+
defer func() {
go w.heartbeat()
+ go w.selfDerive()
}()
- if _, err := w.deriveAddress(accounts.DefaultBaseDerivationPath); err != nil {
+ if _, err = w.ledgerDerive(accounts.DefaultBaseDerivationPath); err != nil {
// Ethereum app is not running, nothing more to do, return
return nil
}
// Try to resolve the Ethereum app's version, will fail prior to v1.0.2
- if w.resolveVersion() != nil {
+ if w.version, err = w.ledgerVersion(); err != nil {
w.version = [3]byte{1, 0, 0} // Assume worst case, can't verify if v1.0.0 or v1.0.1
}
return nil
@@ -222,57 +254,94 @@ func (w *ledgerWallet) Open(passphrase string) error {
// - libusb on Windows doesn't support hotplug, so we can't detect USB unplugs
// - communication timeout on the Ledger requires a device power cycle to fix
func (w *ledgerWallet) heartbeat() {
+ glog.V(logger.Debug).Infof("%s health-check started", w.url.String())
+ defer glog.V(logger.Debug).Infof("%s health-check stopped", w.url.String())
+
// Execute heartbeat checks until termination or error
var (
errc chan error
- fail error
+ err error
)
- for errc == nil && fail == nil {
+ for errc == nil && err == nil {
// Wait until termination is requested or the heartbeat cycle arrives
select {
- case errc = <-w.quit:
+ case errc = <-w.healthQuit:
// Termination requested
continue
case <-time.After(ledgerHeartbeatCycle):
// Heartbeat time
}
// Execute a tiny data exchange to see responsiveness
- w.lock.Lock()
- if err := w.resolveVersion(); err == usb.ERROR_IO || err == usb.ERROR_NO_DEVICE {
+ w.stateLock.RLock()
+ if w.device == nil {
+ // Terminated while waiting for the lock
+ w.stateLock.RUnlock()
+ continue
+ }
+ <-w.commsLock // Don't lock state while resolving version
+ _, err = w.ledgerVersion()
+ w.commsLock <- struct{}{}
+ w.stateLock.RUnlock()
+
+ if err == usb.ERROR_IO || err == usb.ERROR_NO_DEVICE {
+ w.stateLock.Lock() // Lock state to tear the wallet down
w.failure = err
w.close()
-
- fail = err
+ w.stateLock.Unlock()
}
- w.lock.Unlock()
+ // Ignore uninteresting errors
+ err = nil
}
// In case of error, wait for termination
- if fail != nil {
- errc = <-w.quit
+ if err != nil {
+ glog.V(logger.Debug).Infof("%s health-check failed: %v", w.url.String(), err)
+ errc = <-w.healthQuit
}
- errc <- fail
+ errc <- err
}
// Close implements accounts.Wallet, closing the USB connection to the Ledger.
func (w *ledgerWallet) Close() error {
- // Terminate the health checks
- errc := make(chan error)
- w.quit <- errc
- herr := <-errc // Save for later, we *must* close the USB
+ // Ensure the wallet was opened
+ w.stateLock.RLock()
+ hQuit, dQuit := w.healthQuit, w.deriveQuit
+ w.stateLock.RUnlock()
+ // Terminate the health checks
+ var herr error
+ if hQuit != nil {
+ errc := make(chan error)
+ hQuit <- errc
+ herr = <-errc // Save for later, we *must* close the USB
+ }
+ // Terminate the self-derivations
+ var derr error
+ if dQuit != nil {
+ errc := make(chan error)
+ dQuit <- errc
+ derr = <-errc // Save for later, we *must* close the USB
+ }
// Terminate the device connection
- w.lock.Lock()
- defer w.lock.Unlock()
+ w.stateLock.Lock()
+ defer w.stateLock.Unlock()
+
+ w.healthQuit = nil
+ w.deriveQuit = nil
+ w.deriveReq = nil
- w.quit = nil
if err := w.close(); err != nil {
return err
}
- return herr // If all went well, return any health-check errors
+ if herr != nil {
+ return herr
+ }
+ return derr
}
// close is the internal wallet closer that terminates the USB connection and
-// resets all the fields to their defaults. It assumes the lock is held.
+// resets all the fields to their defaults.
+//
+// Note, close assumes the state lock is held!
func (w *ledgerWallet) close() error {
// Allow duplicate closes, especially for health-check failures
if w.device == nil {
@@ -282,97 +351,169 @@ func (w *ledgerWallet) close() error {
err := w.device.Close()
w.device, w.input, w.output = nil, nil, nil
- w.version, w.paths = [3]byte{}, nil
+ w.version, w.accounts, w.paths = [3]byte{}, nil, nil
return err
}
// Accounts implements accounts.Wallet, returning the list of accounts pinned to
-// the Ledger hardware wallet. If self derivation was enabled, the account list
+// the Ledger hardware wallet. If self-derivation was enabled, the account list
// is periodically expanded based on current chain state.
func (w *ledgerWallet) Accounts() []accounts.Account {
- w.lock.Lock()
- defer w.lock.Unlock()
-
- // If the wallet is offline, there are no accounts to return
- if w.offline() {
- return nil
+ // Attempt self-derivation if it's running
+ reqc := make(chan struct{}, 1)
+ select {
+ case w.deriveReq <- reqc:
+ // Self-derivation request accepted, wait for it
+ <-reqc
+ default:
+ // Self-derivation offline, throttled or busy, skip
}
- // If no self derivation is done (or throttled), return the current accounts
- if w.selfDeriveChain == nil || time.Since(w.selfDeriveTime) < ledgerSelfDeriveThrottling {
- cpy := make([]accounts.Account, len(w.accounts))
- copy(cpy, w.accounts)
- return cpy
- }
- // Self derivation requested, try to expand our account list
- ctx := context.Background()
- for empty := false; !empty; {
- // Retrieve the next derived Ethereum account
- var err error
- if w.selfDeriveNextAddr == (common.Address{}) {
- w.selfDeriveNextAddr, err = w.deriveAddress(w.selfDeriveNextPath)
- if err != nil {
- // Derivation failed, disable auto discovery
- glog.V(logger.Warn).Infof("self-derivation failed: %v", err)
- w.selfDeriveChain = nil
- break
- }
- }
- // Check the account's status against the current chain state
- balance, err := w.selfDeriveChain.BalanceAt(ctx, w.selfDeriveNextAddr, nil)
- if err != nil {
- glog.V(logger.Warn).Infof("self-derivation balance retrieval failed: %v", err)
- w.selfDeriveChain = nil
- break
+ // Return whatever account list we ended up with
+ w.stateLock.RLock()
+ defer w.stateLock.RUnlock()
+
+ cpy := make([]accounts.Account, len(w.accounts))
+ copy(cpy, w.accounts)
+ return cpy
+}
+
+// selfDerive is an account derivation loop that upon request attempts to find
+// new non-zero accounts.
+func (w *ledgerWallet) selfDerive() {
+ glog.V(logger.Debug).Infof("%s self-derivation started", w.url.String())
+ defer glog.V(logger.Debug).Infof("%s self-derivation stopped", w.url.String())
+
+ // Execute self-derivations until termination or error
+ var (
+ reqc chan struct{}
+ errc chan error
+ err error
+ )
+ for errc == nil && err == nil {
+ // Wait until either derivation or termination is requested
+ select {
+ case errc = <-w.deriveQuit:
+ // Termination requested
+ continue
+ case reqc = <-w.deriveReq:
+ // Account discovery requested
}
- nonce, err := w.selfDeriveChain.NonceAt(ctx, w.selfDeriveNextAddr, nil)
- if err != nil {
- glog.V(logger.Warn).Infof("self-derivation nonce retrieval failed: %v", err)
- w.selfDeriveChain = nil
- break
+ // Derivation needs a chain and device access, skip if either unavailable
+ w.stateLock.RLock()
+ if w.device == nil || w.deriveChain == nil || w.offline() {
+ w.stateLock.RUnlock()
+ reqc <- struct{}{}
+ continue
}
- // If the next account is empty, stop self-derivation, but add it nonetheless
- if balance.BitLen() == 0 && nonce == 0 {
- w.selfDerivePrevZero = w.selfDeriveNextAddr
- empty = true
+ select {
+ case <-w.commsLock:
+ default:
+ w.stateLock.RUnlock()
+ reqc <- struct{}{}
+ continue
}
- // We've just self-derived a new non-zero account, start tracking it
- path := make(accounts.DerivationPath, len(w.selfDeriveNextPath))
- copy(path[:], w.selfDeriveNextPath[:])
+ // Device lock obtained, derive the next batch of accounts
+ var (
+ accs []accounts.Account
+ paths []accounts.DerivationPath
+
+ nextAddr = w.deriveNextAddr
+ nextPath = w.deriveNextPath
+
+ context = context.Background()
+ )
+ for empty := false; !empty; {
+ // Retrieve the next derived Ethereum account
+ if nextAddr == (common.Address{}) {
+ if nextAddr, err = w.ledgerDerive(nextPath); err != nil {
+ glog.V(logger.Warn).Infof("%s self-derivation failed: %v", w.url.String(), err)
+ break
+ }
+ }
+ // Check the account's status against the current chain state
+ var (
+ balance *big.Int
+ nonce uint64
+ )
+ balance, err = w.deriveChain.BalanceAt(context, nextAddr, nil)
+ if err != nil {
+ glog.V(logger.Warn).Infof("%s self-derivation balance retrieval failed: %v", w.url.String(), err)
+ break
+ }
+ nonce, err = w.deriveChain.NonceAt(context, nextAddr, nil)
+ if err != nil {
+ glog.V(logger.Warn).Infof("%s self-derivation nonce retrieval failed: %v", w.url.String(), err)
+ break
+ }
+ // If the next account is empty, stop self-derivation, but add it nonetheless
+ if balance.BitLen() == 0 && nonce == 0 {
+ empty = true
+ }
+ // We've just self-derived a new account, start tracking it locally
+ path := make(accounts.DerivationPath, len(nextPath))
+ copy(path[:], nextPath[:])
+ paths = append(paths, path)
+
+ account := accounts.Account{
+ Address: nextAddr,
+ URL: accounts.URL{Scheme: w.url.Scheme, Path: fmt.Sprintf("%s/%s", w.url.Path, path)},
+ }
+ accs = append(accs, account)
- account := accounts.Account{
- Address: w.selfDeriveNextAddr,
- URL: accounts.URL{Scheme: w.url.Scheme, Path: fmt.Sprintf("%s/%s", w.url.Path, path)},
- }
- _, known := w.paths[w.selfDeriveNextAddr]
- if !known || (!empty && w.selfDeriveNextAddr == w.selfDerivePrevZero) {
- // Either fully new account, or previous zero. Report discovery either way
- glog.V(logger.Info).Infof("%s discovered %s (balance %d, nonce %d) at %s", w.url.String(), w.selfDeriveNextAddr.Hex(), balance, nonce, path)
+ // Display a log message to the user for new (or previously empty accounts)
+ if _, known := w.paths[nextAddr]; !known || (!empty && nextAddr == w.deriveNextAddr) {
+ glog.V(logger.Info).Infof("%s discovered %s (balance %d, nonce %d) at %s", w.url.String(), nextAddr.Hex(), balance, nonce, path)
+ }
+ // Fetch the next potential account
+ if !empty {
+ nextAddr = common.Address{}
+ nextPath[len(nextPath)-1]++
+ }
}
- if !known {
- w.accounts = append(w.accounts, account)
- w.paths[w.selfDeriveNextAddr] = path
+ // Self derivation complete, release device lock
+ w.commsLock <- struct{}{}
+ w.stateLock.RUnlock()
+
+ // Insert any accounts successfully derived
+ w.stateLock.Lock()
+ for i := 0; i < len(accs); i++ {
+ if _, ok := w.paths[accs[i].Address]; !ok {
+ w.accounts = append(w.accounts, accs[i])
+ w.paths[accs[i].Address] = paths[i]
+ }
}
- // Fetch the next potential account
- if !empty {
- w.selfDeriveNextAddr = common.Address{}
- w.selfDeriveNextPath[len(w.selfDeriveNextPath)-1]++
+ // Shift the self-derivation forward
+ // TODO(karalabe): don't overwrite changes from wallet.SelfDerive
+ w.deriveNextAddr = nextAddr
+ w.deriveNextPath = nextPath
+ w.stateLock.Unlock()
+
+ // Notify the user of termination and loop after a bit of time (to avoid trashing)
+ reqc <- struct{}{}
+ if err == nil {
+ select {
+ case errc = <-w.deriveQuit:
+ // Termination requested, abort
+ case <-time.After(ledgerSelfDeriveThrottling):
+ // Waited enough, willing to self-derive again
+ }
}
}
- w.selfDeriveTime = time.Now()
-
- // Return whatever account list we ended up with
- cpy := make([]accounts.Account, len(w.accounts))
- copy(cpy, w.accounts)
- return cpy
+ // In case of error, wait for termination
+ if err != nil {
+ glog.V(logger.Debug).Infof("%s self-derivation failed: %s", w.url.String(), err)
+ errc = <-w.deriveQuit
+ }
+ errc <- err
}
// Contains implements accounts.Wallet, returning whether a particular account is
// or is not pinned into this Ledger instance. Although we could attempt to resolve
// unpinned accounts, that would be an non-negligible hardware operation.
func (w *ledgerWallet) Contains(account accounts.Account) bool {
- w.lock.RLock()
- defer w.lock.RUnlock()
+ w.stateLock.RLock()
+ defer w.stateLock.RUnlock()
_, exists := w.paths[account.Address]
return exists
@@ -382,15 +523,20 @@ func (w *ledgerWallet) Contains(account accounts.Account) bool {
// derivation path. If pin is set to true, the account will be added to the list
// of tracked accounts.
func (w *ledgerWallet) Derive(path accounts.DerivationPath, pin bool) (accounts.Account, error) {
- w.lock.Lock()
- defer w.lock.Unlock()
+ // Try to derive the actual account and update its URL if successful
+ w.stateLock.RLock() // Avoid device disappearing during derivation
- // If the wallet is closed, or the Ethereum app doesn't run, abort
if w.device == nil || w.offline() {
+ w.stateLock.RUnlock()
return accounts.Account{}, accounts.ErrWalletClosed
}
- // Try to derive the actual account and update it's URL if succeeful
- address, err := w.deriveAddress(path)
+ <-w.commsLock // Avoid concurrent hardware access
+ address, err := w.ledgerDerive(path)
+ w.commsLock <- struct{}{}
+
+ w.stateLock.RUnlock()
+
+ // If an error occurred or no pinning was requested, return
if err != nil {
return accounts.Account{}, err
}
@@ -398,12 +544,16 @@ func (w *ledgerWallet) Derive(path accounts.DerivationPath, pin bool) (accounts.
Address: address,
URL: accounts.URL{Scheme: w.url.Scheme, Path: fmt.Sprintf("%s/%s", w.url.Path, path)},
}
- // If pinning was requested, track the account
- if pin {
- if _, ok := w.paths[address]; !ok {
- w.accounts = append(w.accounts, account)
- w.paths[address] = path
- }
+ if !pin {
+ return account, nil
+ }
+ // Pinning needs to modify the state
+ w.stateLock.Lock()
+ defer w.stateLock.Unlock()
+
+ if _, ok := w.paths[address]; !ok {
+ w.accounts = append(w.accounts, account)
+ w.paths[address] = path
}
return account, nil
}
@@ -413,14 +563,14 @@ func (w *ledgerWallet) Derive(path accounts.DerivationPath, pin bool) (accounts.
// explicitly pin to the wallet manually. To avoid chain head monitoring, self
// derivation only runs during account listing (and even then throttled).
func (w *ledgerWallet) SelfDerive(base accounts.DerivationPath, chain ethereum.ChainStateReader) {
- w.lock.Lock()
- defer w.lock.Unlock()
+ w.stateLock.Lock()
+ defer w.stateLock.Unlock()
- w.selfDeriveNextPath = make(accounts.DerivationPath, len(base))
- copy(w.selfDeriveNextPath[:], base[:])
+ w.deriveNextPath = make(accounts.DerivationPath, len(base))
+ copy(w.deriveNextPath[:], base[:])
- w.selfDeriveNextAddr = common.Address{}
- w.selfDeriveChain = chain
+ w.deriveNextAddr = common.Address{}
+ w.deriveChain = chain
}
// SignHash implements accounts.Wallet, however signing arbitrary data is not
@@ -437,9 +587,13 @@ func (w *ledgerWallet) SignHash(acc accounts.Account, hash []byte) ([]byte, erro
// too old to sign EIP-155 transactions, but such is requested nonetheless, an error
// will be returned opposed to silently signing in Homestead mode.
func (w *ledgerWallet) SignTx(account accounts.Account, tx *types.Transaction, chainID *big.Int) (*types.Transaction, error) {
- w.lock.Lock()
- defer w.lock.Unlock()
+ w.stateLock.RLock() // Comms have own mutex, this is for the state fields
+ defer w.stateLock.RUnlock()
+ // If the wallet is closed, or the Ethereum app doesn't run, abort
+ if w.device == nil || w.offline() {
+ return nil, accounts.ErrWalletClosed
+ }
// Make sure the requested account is contained within
path, ok := w.paths[account.Address]
if !ok {
@@ -447,10 +601,13 @@ func (w *ledgerWallet) SignTx(account accounts.Account, tx *types.Transaction, c
}
// Ensure the wallet is capable of signing the given transaction
if chainID != nil && w.version[0] <= 1 && w.version[1] <= 0 && w.version[2] <= 2 {
- return nil, fmt.Errorf("Ledger v%d.%d.%d doesn't support signing this transaction, please update to v1.0.3 at least",
- w.version[0], w.version[1], w.version[2])
+ return nil, fmt.Errorf("Ledger v%d.%d.%d doesn't support signing this transaction, please update to v1.0.3 at least", w.version[0], w.version[1], w.version[2])
}
- return w.sign(path, account.Address, tx, chainID)
+ // All infos gathered and metadata checks out, request signing
+ <-w.commsLock
+ defer func() { w.commsLock <- struct{}{} }()
+
+ return w.ledgerSign(path, account.Address, tx, chainID)
}
// SignHashWithPassphrase implements accounts.Wallet, however signing arbitrary
@@ -467,8 +624,8 @@ func (w *ledgerWallet) SignTxWithPassphrase(account accounts.Account, passphrase
return w.SignTx(account, tx, chainID)
}
-// resolveVersion retrieves the current version of the Ethereum wallet app running
-// on the Ledger wallet and caches it for future reference.
+// ledgerVersion retrieves the current version of the Ethereum wallet app running
+// on the Ledger wallet.
//
// The version retrieval protocol is defined as follows:
//
@@ -484,21 +641,22 @@ func (w *ledgerWallet) SignTxWithPassphrase(account accounts.Account, passphrase
// Application major version | 1 byte
// Application minor version | 1 byte
// Application patch version | 1 byte
-func (wallet *ledgerWallet) resolveVersion() error {
+func (w *ledgerWallet) ledgerVersion() ([3]byte, error) {
// Send the request and wait for the response
- reply, err := wallet.exchange(ledgerOpGetConfiguration, 0, 0, nil)
+ reply, err := w.ledgerExchange(ledgerOpGetConfiguration, 0, 0, nil)
if err != nil {
- return err
+ return [3]byte{}, err
}
if len(reply) != 4 {
- return errors.New("reply not of correct size")
+ return [3]byte{}, errors.New("reply not of correct size")
}
// Cache the version for future reference
- copy(wallet.version[:], reply[1:])
- return nil
+ var version [3]byte
+ copy(version[:], reply[1:])
+ return version, nil
}
-// deriveAddress retrieves the currently active Ethereum address from a Ledger
+// ledgerDerive retrieves the currently active Ethereum address from a Ledger
// wallet at the specified derivation path.
//
// The address derivation protocol is defined as follows:
@@ -529,7 +687,7 @@ func (wallet *ledgerWallet) resolveVersion() error {
// Ethereum address length | 1 byte
// Ethereum address | 40 bytes hex ascii
// Chain code if requested | 32 bytes
-func (w *ledgerWallet) deriveAddress(derivationPath []uint32) (common.Address, error) {
+func (w *ledgerWallet) ledgerDerive(derivationPath []uint32) (common.Address, error) {
// Flatten the derivation path into the Ledger request
path := make([]byte, 1+4*len(derivationPath))
path[0] = byte(len(derivationPath))
@@ -537,7 +695,7 @@ func (w *ledgerWallet) deriveAddress(derivationPath []uint32) (common.Address, e
binary.BigEndian.PutUint32(path[1+4*i:], component)
}
// Send the request and wait for the response
- reply, err := w.exchange(ledgerOpRetrieveAddress, ledgerP1DirectlyFetchAddress, ledgerP2DiscardAddressChainCode, path)
+ reply, err := w.ledgerExchange(ledgerOpRetrieveAddress, ledgerP1DirectlyFetchAddress, ledgerP2DiscardAddressChainCode, path)
if err != nil {
return common.Address{}, err
}
@@ -559,8 +717,8 @@ func (w *ledgerWallet) deriveAddress(derivationPath []uint32) (common.Address, e
return address, nil
}
-// sign sends the transaction to the Ledger wallet, and waits for the user to
-// confirm or deny the transaction.
+// ledgerSign sends the transaction to the Ledger wallet, and waits for the user
+// to confirm or deny the transaction.
//
// The transaction signing protocol is defined as follows:
//
@@ -593,7 +751,7 @@ func (w *ledgerWallet) deriveAddress(derivationPath []uint32) (common.Address, e
// signature V | 1 byte
// signature R | 32 bytes
// signature S | 32 bytes
-func (w *ledgerWallet) sign(derivationPath []uint32, address common.Address, tx *types.Transaction, chainID *big.Int) (*types.Transaction, error) {
+func (w *ledgerWallet) ledgerSign(derivationPath []uint32, address common.Address, tx *types.Transaction, chainID *big.Int) (*types.Transaction, error) {
// We need to modify the timeouts to account for user feedback
defer func(old time.Duration) { w.device.ReadTimeout = old }(w.device.ReadTimeout)
w.device.ReadTimeout = time.Minute
@@ -632,7 +790,7 @@ func (w *ledgerWallet) sign(derivationPath []uint32, address common.Address, tx
chunk = len(payload)
}
// Send the chunk over, ensuring it's processed correctly
- reply, err = w.exchange(ledgerOpSignTransaction, op, 0, payload[:chunk])
+ reply, err = w.ledgerExchange(ledgerOpSignTransaction, op, 0, payload[:chunk])
if err != nil {
return nil, err
}
@@ -669,8 +827,8 @@ func (w *ledgerWallet) sign(derivationPath []uint32, address common.Address, tx
return signed, nil
}
-// exchange performs a data exchange with the Ledger wallet, sending it a message
-// and retrieving the response.
+// ledgerExchange performs a data exchange with the Ledger wallet, sending it a
+// message and retrieving the response.
//
// The common transport header is defined as follows:
//
@@ -702,7 +860,7 @@ func (w *ledgerWallet) sign(derivationPath []uint32, address common.Address, tx
// APDU P2 | 1 byte
// APDU length | 1 byte
// Optional APDU data | arbitrary
-func (w *ledgerWallet) exchange(opcode ledgerOpcode, p1 ledgerParam1, p2 ledgerParam2, data []byte) ([]byte, error) {
+func (w *ledgerWallet) ledgerExchange(opcode ledgerOpcode, p1 ledgerParam1, p2 ledgerParam2, data []byte) ([]byte, error) {
// Construct the message payload, possibly split into multiple chunks
var chunks [][]byte
for left := data; len(left) > 0 || len(chunks) == 0; {
@@ -731,7 +889,7 @@ func (w *ledgerWallet) exchange(opcode ledgerOpcode, p1 ledgerParam1, p2 ledgerP
msg := append(header, chunk...)
// Send over to the device
- if glog.V(logger.Core) {
+ if glog.V(logger.Detail) {
glog.Infof("-> %03d.%03d: %x", w.device.Bus, w.device.Address, msg)
}
if _, err := w.input.Write(msg); err != nil {
@@ -746,7 +904,7 @@ func (w *ledgerWallet) exchange(opcode ledgerOpcode, p1 ledgerParam1, p2 ledgerP
if _, err := io.ReadFull(w.output, chunk); err != nil {
return nil, err
}
- if glog.V(logger.Core) {
+ if glog.V(logger.Detail) {
glog.Infof("<- %03d.%03d: %x", w.device.Bus, w.device.Address, chunk)
}
// Make sure the transport header matches