#.rst:
# FindPackageHandleStandardArgs
# -----------------------------
#
#
#
# FIND_PACKAGE_HANDLE_STANDARD_ARGS(<name> ... )
#
# This function is intended to be used in FindXXX.cmake modules files.
# It handles the REQUIRED, QUIET and version-related arguments to
# find_package(). It also sets the <packagename>_FOUND variable. The
# package is considered found if all variables <var1>... listed contain
# valid results, e.g. valid filepaths.
#
# There are two modes of this function. The first argument in both
# modes is the name of the Find-module where it is called (in original
# casing).
#
# The first simple mode looks like this:
#
# ::
#
# FIND_PACKAGE_HANDLE_STANDARD_ARGS(<name>
# (DEFAULT_MSG|"Custom failure message") <var1>...<varN> )
#
# If the variables <var1> to <varN> are all valid, then
# <UPPERCASED_NAME>_FOUND will be set to TRUE. If DEFAULT_MSG is given
# as second argument, then the function will generate itself useful
# success and error messages. You can also supply a custom error
# message for the failure case. This is not recommended.
#
# The second mode is more powerful and also supports version checking:
#
# ::
#
# FIND_PACKAGE_HANDLE_STANDARD_ARGS(NAME
# [FOUND_VAR <resultVar>]
# [REQUIRED_VARS <var1>...<varN>]
# [VERSION_VAR <versionvar>]
# [HANDLE_COMPONENTS]
# [CONFIG_MODE]
# [FAIL_MESSAGE "Custom failure message"] )
#
# In this mode, the name of the result-variable can be set either to
# either <UPPERCASED_NAME>_FOUND or <OriginalCase_Name>_FOUND using the
# FOUND_VAR option. Other names for the result-variable are not
# allowed. So for a Find-module named FindFooBar.cmake, the two
# possible names are FooBar_FOUND and FOOBAR_FOUND. It is recommended
# to use the original case version. If the FOUND_VAR option is not
# used, the default is <UPPERCASED_NAME>_FOUND.
#
# As in the simple mode, if <var1> through <varN> are all valid,
# <packagename>_FOUND will be set to TRUE. After REQUIRED_VARS the
# variables which are required for this package are listed. Following
# VERSION_VAR the name of the variable can be specified which holds the
# version of the package which has been found. If this is done, this
# version will be checked against the (potentially) specified required
# version used in the find_package() call. The EXACT keyword is also
# handled. The default messages include information about the required
# version and the version which has been actually found, both if the
# version is ok or not. If the package supports components, use the
# HANDLE_COMPONENTS option to enable handling them. In this case,
# find_package_handle_standard_args() will report which components have
# been found and which are missing, and the <packagename>_FOUND variable
# will be set to FALSE if any of the required components (i.e. not the
# ones listed after OPTIONAL_COMPONENTS) are missing. Use the option
# CONFIG_MODE if your FindXXX.cmake module is a wrapper for a
# find_package(... NO_MODULE) call. In this case VERSION_VAR will be
# set to <NAME>_VERSION and the macro will automatically check whether
# the Config module was found. Via FAIL_MESSAGE a custom failure
# message can be specified, if this is not used, the default message
# will be displayed.
#
# Example for mode 1:
#
# ::
#
# find_package_handle_standard_args(LibXml2 DEFAULT_MSG
# LIBXML2_LIBRARY LIBXML2_INCLUDE_DIR)
#
#
#
# LibXml2 is considered to be found, if both LIBXML2_LIBRARY and
# LIBXML2_INCLUDE_DIR are valid. Then also LIBXML2_FOUND is set to
# TRUE. If it is not found and REQUIRED was used, it fails with
# FATAL_ERROR, independent whether QUIET was used or not. If it is
# found, success will be reported, including the content of <var1>. On
# repeated Cmake runs, the same message won't be printed again.
#
# Example for mode 2:
#
# ::
#
# find_package_handle_standard_args(LibXslt
# FOUND_VAR LibXslt_FOUND
# REQUIRED_VARS LibXslt_LIBRARIES LibXslt_INCLUDE_DIRS
# VERSION_VAR LibXslt_VERSION_STRING)
#
# In this case, LibXslt is considered to be found if the variable(s)
# listed after REQUIRED_VAR are all valid, i.e. LibXslt_LIBRARIES and
# LibXslt_INCLUDE_DIRS in this case. The result will then be stored in
# LibXslt_FOUND . Also the version of LibXslt will be checked by using
# the version contained in LibXslt_VERSION_STRING. Since no
# FAIL_MESSAGE is given, the default messages will be printed.
#
# Another example for mode 2:
#
# ::
#
# find_package(Automoc4 QUIET NO_MODULE HINTS /opt/automoc4)
# find_package_handle_standard_args(Automoc4 CONFIG_MODE)
#
# In this case, FindAutmoc4.cmake wraps a call to find_package(Automoc4
# NO_MODULE) and adds an additional search directory for automoc4. Here
# the result will be stored in AUTOMOC4_FOUND. The following
# FIND_PACKAGE_HANDLE_STANDARD_ARGS() call produces a proper
# success/error message.
#=============================================================================
# Copyright 2007-2009 Kitware, Inc.
#
# Distributed under the OSI-approved BSD License (the "License");
# see accompanying file Copyright.txt for details.
#
# This software is distributed WITHOUT ANY WARRANTY; without even the
# implied warranty of MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.
# See the License for more information.
#=============================================================================
# (To distribute this file outside of CMake, substitute the full
# License text for the above reference.)
include(${CMAKE_CURRENT_LIST_DIR}/FindPackageMessage.cmake)
include(${CMAKE_CURRENT_LIST_DIR}/CMakeParseArguments.cmake)
# internal helper macro
macro(_FPHSA_FAILURE_MESSAGE _msg)
if (${_NAME}_FIND_REQUIRED)
message(FATAL_ERROR "${_msg}")
else ()
if (NOT ${_NAME}_FIND_QUIETLY)
message(STATUS "${_msg}")
endif ()
endif ()
endmacro()
# internal helper macro to generate the failure message when used in CONFIG_MODE:
macro(_FPHSA_HANDLE_FAILURE_CONFIG_MODE)
# <name>_CONFIG is set, but FOUND is false, this means that some other of the REQUIRED_VARS was not found:
if(${_NAME}_CONFIG)
_FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: missing: ${MISSING_VARS} (found ${${_NAME}_CONFIG} ${VERSION_MSG})")
else()
# If _CONSIDERED_CONFIGS is set, the config-file has been found, but no suitable version.
# List them all in the error message:
if(${_NAME}_CONSIDERED_CONFIGS)
set(configsText "")
list(LENGTH ${_NAME}_CONSIDERED_CONFIGS configsCount)
math(EXPR configsCount "${configsCount} - 1")
foreach(currentConfigIndex RANGE ${configsCount})
list(GET ${_NAME}_CONSIDERED_CONFIGS ${currentConfigIndex} filename)
list(GET ${_NAME}_CONSIDERED_VERSIONS ${currentConfigIndex} version)
set(configsText "${configsText} ${filename} (version ${version})\n")
endforeach()
if (${_NAME}_NOT_FOUND_MESSAGE)
set(configsText "${configsText} Reason given by package: ${${_NAME}_NOT_FOUND_MESSAGE}\n")
endif()
_FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE} ${VERSION_MSG}, checked the following files:\n${configsText}")
else()
# Simple case: No Config-file was found at all:
_FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: found neither ${_NAME}Config.cmake nor ${_NAME_LOWER}-config.cmake ${VERSION_MSG}")
endif()
endif()
endmacro()
function(FIND_PACKAGE_HANDLE_STANDARD_ARGS _NAME _FIRST_ARG)
# set up the arguments for CMAKE_PARSE_ARGUMENTS and check whether we are in
# new extended or in the "old" mode:
set(options CONFIG_MODE HANDLE_COMPONENTS)
set(oneValueArgs FAIL_MESSAGE VERSION_VAR FOUND_VAR)
set(multiValueArgs REQUIRED_VARS)
set(_KEYWORDS_FOR_EXTENDED_MODE ${options} ${oneValueArgs} ${multiValueArgs} )
list(FIND _KEYWORDS_FOR_EXTENDED_MODE "${_FIRST_ARG}" INDEX)
if(${INDEX} EQUAL -1)
set(FPHSA_FAIL_MESSAGE ${_FIRST_ARG})
set(FPHSA_REQUIRED_VARS ${ARGN})
set(FPHSA_VERSION_VAR)
else()
CMAKE_PARSE_ARGUMENTS(FPHSA "${options}" "${oneValueArgs}" "${multiValueArgs}" ${_FIRST_ARG} ${ARGN})
if(FPHSA_UNPARSED_ARGUMENTS)
message(FATAL_ERROR "Unknown keywords given to FIND_PACKAGE_HANDLE_STANDARD_ARGS(): \"${FPHSA_UNPARSED_ARGUMENTS}\"")
endif()
if(NOT FPHSA_FAIL_MESSAGE)
set(FPHSA_FAIL_MESSAGE "DEFAULT_MSG")
endif()
endif()
# now that we collected all arguments, process them
if("x${FPHSA_FAIL_MESSAGE}" STREQUAL "xDEFAULT_MSG")
set(FPHSA_FAIL_MESSAGE "Could NOT find ${_NAME}")
endif()
# In config-mode, we rely on the variable <package>_CONFIG, which is set by find_package()
# when it successfully found the config-file, including version checking:
if(FPHSA_CONFIG_MODE)
list(INSERT FPHSA_REQUIRED_VARS 0 ${_NAME}_CONFIG)
list(REMOVE_DUPLICATES FPHSA_REQUIRED_VARS)
set(FPHSA_VERSION_VAR ${_NAME}_VERSION)
endif()
if(NOT FPHSA_REQUIRED_VARS)
message(FATAL_ERROR "No REQUIRED_VARS specified for FIND_PACKAGE_HANDLE_STANDARD_ARGS()")
endif()
list(GET FPHSA_REQUIRED_VARS 0 _FIRST_REQUIRED_VAR)
string(TOUPPER ${_NAME} _NAME_UPPER)
string(TOLOWER ${_NAME} _NAME_LOWER)
if(FPHSA_FOUND_VAR)
if(FPHSA_FOUND_VAR MATCHES "^${_NAME}_FOUND$" OR FPHSA_FOUND_VAR MATCHES "^${_NAME_UPPER}_FOUND$")
set(_FOUND_VAR ${FPHSA_FOUND_VAR})
else()
message(FATAL_ERROR "The argument for FOUND_VAR is \"${FPHSA_FOUND_VAR}\", but only \"${_NAME}_FOUND\" and \"${_NAME_UPPER}_FOUND\" are valid names.")
endif()
else()
set(_FOUND_VAR ${_NAME_UPPER}_FOUND)
endif()
# collect all variables which were not found, so they can be printed, so the
# user knows better what went wrong (#6375)
set(MISSING_VARS "")
set(DETAILS "")
# check if all passed variables are valid
unset(${_FOUND_VAR})
foreach(_CURRENT_VAR ${FPHSA_REQUIRED_VARS})
if(NOT ${_CURRENT_VAR})
set(${_FOUND_VAR} FALSE)
set(MISSING_VARS "${MISSING_VARS} ${_CURRENT_VAR}")
else()
set(DETAILS "${DETAILS}[${${_CURRENT_VAR}}]")
endif()
endforeach()
if(NOT "${${_FOUND_VAR}}" STREQUAL "FALSE")
set(${_FOUND_VAR} TRUE)
endif()
# component handling
unset(FOUND_COMPONENTS_MSG)
unset(MISSING_COMPONENTS_MSG)
if(FPHSA_HANDLE_COMPONENTS)
foreach(comp ${${_NAME}_FIND_COMPONENTS})
if(${_NAME}_${comp}_FOUND)
if(NOT DEFINED FOUND_COMPONENTS_MSG)
set(FOUND_COMPONENTS_MSG "found components: ")
endif()
set(FOUND_COMPONENTS_MSG "${FOUND_COMPONENTS_MSG} ${comp}")
else()
if(NOT DEFINED MISSING_COMPONENTS_MSG)
set(MISSING_COMPONENTS_MSG "missing components: ")
endif()
set(MISSING_COMPONENTS_MSG "${MISSING_COMPONENTS_MSG} ${comp}")
if(${_NAME}_FIND_REQUIRED_${comp})
set(${_FOUND_VAR} FALSE)
set(MISSING_VARS "${MISSING_VARS} ${comp}")
endif()
endif()
endforeach()
set(COMPONENT_MSG "${FOUND_COMPONENTS_MSG} ${MISSING_COMPONENTS_MSG}")
set(DETAILS "${DETAILS}[c${COMPONENT_MSG}]")
endif()
# version handling:
set(VERSION_MSG "")
set(VERSION_OK TRUE)
set(VERSION ${${FPHSA_VERSION_VAR}})
# check with DEFINED here as the requested or found version may be "0"
if (DEFINED ${_NAME}_FIND_VERSION)
if(DEFINED ${FPHSA_VERSION_VAR})
if(${_NAME}_FIND_VERSION_EXACT) # exact version required
# count the dots in the version string
string(REGEX REPLACE "[^.]" "" _VERSION_DOTS "${VERSION}")
# add one dot because there is one dot more than there are components
string(LENGTH "${_VERSION_DOTS}." _VERSION_DOTS)
if (_VERSION_DOTS GREATER ${_NAME}_FIND_VERSION_COUNT)
# Because of the C++ implementation of find_package() ${_NAME}_FIND_VERSION_COUNT
# is at most 4 here. Therefore a simple lookup table is used.
if (${_NAME}_FIND_VERSION_COUNT EQUAL 1)
set(_VERSION_REGEX "[^.]*")
elseif (${_NAME}_FIND_VERSION_COUNT EQUAL 2)
set(_VERSION_REGEX "[^.]*\\.[^.]*")
elseif (${_NAME}_FIND_VERSION_COUNT EQUAL 3)
set(_VERSION_REGEX "[^.]*\\.[^.]*\\.[^.]*")
else ()
set(_VERSION_REGEX "[^.]*\\.[^.]*\\.[^.]*\\.[^.]*")
endif ()
string(REGEX REPLACE "^(${_VERSION_REGEX})\\..*" "\\1" _VERSION_HEAD "${VERSION}")
unset(_VERSION_REGEX)
if (NOT ${_NAME}_FIND_VERSION VERSION_EQUAL _VERSION_HEAD)
set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"")
set(VERSION_OK FALSE)
else ()
set(VERSION_MSG "(found suitable exact version \"${VERSION}\")")
endif ()
unset(_VERSION_HEAD)
else ()
if (NOT "${${_NAME}_FIND_VERSION}" VERSION_EQUAL "${VERSION}")
set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is exact version \"${${_NAME}_FIND_VERSION}\"")
set(VERSION_OK FALSE)
else ()
set(VERSION_MSG "(found suitable exact version \"${VERSION}\")")
endif ()
endif ()
unset(_VERSION_DOTS)
else() # minimum version specified:
if ("${${_NAME}_FIND_VERSION}" VERSION_GREATER "${VERSION}")
set(VERSION_MSG "Found unsuitable version \"${VERSION}\", but required is at least \"${${_NAME}_FIND_VERSION}\"")
set(VERSION_OK FALSE)
else ()
set(VERSION_MSG "(found suitable version \"${VERSION}\", minimum required is \"${${_NAME}_FIND_VERSION}\")")
endif ()
endif()
else()
# if the package was not found, but a version was given, add that to the output:
if(${_NAME}_FIND_VERSION_EXACT)
set(VERSION_MSG "(Required is exact version \"${${_NAME}_FIND_VERSION}\")")
else()
set(VERSION_MSG "(Required is at least version \"${${_NAME}_FIND_VERSION}\")")
endif()
endif()
else ()
if(VERSION)
set(VERSION_MSG "(found version \"${VERSION}\")")
endif()
endif ()
if(VERSION_OK)
set(DETAILS "${DETAILS}[v${VERSION}(${${_NAME}_FIND_VERSION})]")
else()
set(${_FOUND_VAR} FALSE)
endif()
# print the result:
if (${_FOUND_VAR})
FIND_PACKAGE_MESSAGE(${_NAME} "Found ${_NAME}: ${${_FIRST_REQUIRED_VAR}} ${VERSION_MSG} ${COMPONENT_MSG}" "${DETAILS}")
else ()
if(FPHSA_CONFIG_MODE)
_FPHSA_HANDLE_FAILURE_CONFIG_MODE()
else()
if(NOT VERSION_OK)
_FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE}: ${VERSION_MSG} (found ${${_FIRST_REQUIRED_VAR}})")
else()
_FPHSA_FAILURE_MESSAGE("${FPHSA_FAIL_MESSAGE} (missing: ${MISSING_VARS}) ${VERSION_MSG}")
endif()
endif()
endif ()
set(${_FOUND_VAR} ${${_FOUND_VAR}} PARENT_SCOPE)
endfunction()
