/*
Copyright 2018 ZeroEx Intl.
Licensed under the Apache License, Version 2.0 (the "License");
you may not use this file except in compliance with the License.
You may obtain a copy of the License at
http://www.apache.org/licenses/LICENSE-2.0
Unless required by applicable law or agreed to in writing, software
distributed under the License is distributed on an "AS IS" BASIS,
WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
See the License for the specific language governing permissions and
limitations under the License.
*/
pragma solidity ^0.4.24;
pragma experimental ABIEncoderV2;
import "../utils/LibBytes/LibBytes.sol";
import "./MixinWethFees.sol";
import "./MixinMarketBuyZrx.sol";
import "./MixinExpectedResults.sol";
import "./MixinERC20.sol";
import "./MixinERC721.sol";
import "./MixinConstants.sol";
import "../protocol/Exchange/libs/LibOrder.sol";
contract MixinMarketBuyTokens is
MixinConstants,
MixinWethFees,
MixinMarketBuyZrx,
MixinExpectedResults,
MixinERC20,
MixinERC721
{
bytes4 public constant ERC20_DATA_ID = bytes4(keccak256("ERC20Token(address)"));
bytes4 public constant ERC721_DATA_ID = bytes4(keccak256("ERC721Token(address,uint256,bytes)"));
/// @dev Buys the exact amount of assets (ERC20 and ERC721), performing fee abstraction if required.
/// All order assets must be of the same type. Deducts a proportional fee to fee recipient.
/// This function is payable and will convert all incoming ETH into WETH and perform the trade on behalf of the caller.
/// The caller is sent all assets from the fill of orders. This function will revert unless the requested amount of assets are purchased.
/// Any excess ETH sent will be returned to the caller
/// @param orders An array of Order struct containing order specifications.
/// @param signatures An array of Proof that order has been created by maker.
/// @param feeOrders An array of Order struct containing order specifications for fees.
/// @param makerTokenFillAmount The amount of maker asset to buy.
/// @param feeSignatures An array of Proof that order has been created by maker for the fee orders.
/// @param feeProportion A proportion deducted off the ETH spent and sent to feeRecipient. The maximum value for this
/// is 1000, aka 10%. Supports up to 2 decimal places. I.e 0.59% is 59.
/// @param feeRecipient An address of the fee recipient whom receives feeProportion of ETH.
/// @return FillResults amounts filled and fees paid by maker and taker.
function marketBuyTokensWithEth(
LibOrder.Order[] memory orders,
bytes[] memory signatures,
LibOrder.Order[] memory feeOrders,
bytes[] memory feeSignatures,
uint256 makerTokenFillAmount,
uint16 feeProportion,
address feeRecipient
)
payable
public
returns (FillResults memory totalFillResults)
{
uint256 takerEthAmount = msg.value;
require(
takerEthAmount > 0,
"VALUE_GREATER_THAN_ZERO"
);
require(
makerTokenFillAmount > 0,
"VALUE_GREATER_THAN_ZERO"
);
bytes4 assetDataId = LibBytes.readBytes4(orders[0].makerAssetData, 0);
require(
assetDataId == ERC20_DATA_ID || assetDataId == ERC721_DATA_ID,
"UNSUPPORTED_TOKEN_PROXY"
);
ETHER_TOKEN.deposit.value(takerEthAmount)();
if (assetDataId == ERC20_DATA_ID) {
totalFillResults = marketBuyERC20TokensInternal(
orders,
signatures,
feeOrders,
feeSignatures,
makerTokenFillAmount
);
} else if (assetDataId == ERC721_DATA_ID) {
totalFillResults = batchBuyERC721TokensInternal(
orders,
signatures,
feeOrders,
feeSignatures
);
}
// Prevent accidental WETH owned by this contract and it being spent
require(
takerEthAmount >= totalFillResults.takerAssetFilledAmount,
"INVALID_MSG_VALUE"
);
withdrawPayAndDeductEthFee(
safeSub(takerEthAmount, totalFillResults.takerAssetFilledAmount),
totalFillResults.takerAssetFilledAmount,
feeProportion,
feeRecipient
);
return totalFillResults;
}
/// @dev Buys an exact amount of an ERC20 token using WETH.
/// @param orders Orders to fill. The maker asset is the ERC20 token to buy. The taker asset is WETH.
/// @param signatures Proof that the orders were created by their respective makers.
/// @param feeOrders to fill. The maker asset is ZRX and the taker asset is WETH.
/// @param feeSignatures Proof that the feeOrders were created by their respective makers.
/// @param makerTokenFillAmount Amount of the ERC20 token to buy.
/// @return totalFillResults Aggregated fill results of buying the ERC20 and ZRX tokens.
function marketBuyERC20TokensInternal(
LibOrder.Order[] memory orders,
bytes[] memory signatures,
LibOrder.Order[] memory feeOrders,
bytes[] memory feeSignatures,
uint256 makerTokenFillAmount
)
private
returns (FillResults memory totalFillResults)
{
// We read the maker token address to check if it is ZRX and later use it for transfer
address makerTokenAddress = LibBytes.readAddress(orders[0].makerAssetData, 16);
// We assume that asset being bought by taker is the same for each order.
// Rather than passing this in as calldata, we copy the makerAssetData from the first order onto all later orders.
orders[0].takerAssetData = WETH_ASSET_DATA;
// We can short cut here for effeciency and use buyFeeTokensInternal if maker asset token is ZRX
// this buys us exactly that amount taking into account the fees. This saves gas and calculates the rate correctly
FillResults memory marketBuyResults;
if (makerTokenAddress == address(ZRX_TOKEN)) {
marketBuyResults = marketBuyZrxInternal(
orders,
signatures,
makerTokenFillAmount
);
// When buying ZRX we round up which can result in a small margin excess
require(
marketBuyResults.makerAssetFilledAmount >= makerTokenFillAmount,
"UNACCEPTABLE_THRESHOLD"
);
addFillResults(totalFillResults, marketBuyResults);
require(
isAcceptableThreshold(
safeAdd(totalFillResults.makerAssetFilledAmount, totalFillResults.takerFeePaid), // Total ZRX
totalFillResults.makerAssetFilledAmount // amount going to msg.sender
),
"UNACCEPTABLE_THRESHOLD"
);
} else {
FillResults memory calculatedMarketBuyResults = calculateMarketBuyResults(orders, makerTokenFillAmount);
if (calculatedMarketBuyResults.takerFeePaid > 0) {
// Fees are required for these orders. Buy enough ZRX to cover the future market buy
FillResults memory zrxMarketBuyResults = marketBuyZrxInternal(
feeOrders,
feeSignatures,
calculatedMarketBuyResults.takerFeePaid
);
totalFillResults.takerAssetFilledAmount = zrxMarketBuyResults.takerAssetFilledAmount;
totalFillResults.takerFeePaid = zrxMarketBuyResults.takerFeePaid;
}
// Make our market buy of the requested tokens with the remaining balance
marketBuyResults = EXCHANGE.marketBuyOrders(
orders,
makerTokenFillAmount,
signatures
);
require(
marketBuyResults.makerAssetFilledAmount == makerTokenFillAmount,
"UNACCEPTABLE_THRESHOLD"
);
addFillResults(totalFillResults, marketBuyResults);
require(
isAcceptableThreshold(
totalFillResults.takerAssetFilledAmount,
marketBuyResults.takerAssetFilledAmount
),
"UNACCEPTABLE_THRESHOLD"
);
}
// Transfer all purchased tokens to msg.sender
transferToken(
makerTokenAddress,
msg.sender,
marketBuyResults.makerAssetFilledAmount
);
return totalFillResults;
}
/// @dev Buys an all of the ERC721 tokens in the orders.
/// @param orders Orders to fill. The maker asset is the ERC721 token to buy. The taker asset is WETH.
/// @param signatures Proof that the orders were created by their respective makers.
/// @param feeOrders to fill. The maker asset is ZRX and the taker asset is WETH.
/// @param feeSignatures Proof that the feeOrders were created by their respective makers.
/// @return totalFillResults Aggregated fill results of buying the ERC721 tokens and ZRX tokens.
function batchBuyERC721TokensInternal(
LibOrder.Order[] memory orders,
bytes[] memory signatures,
LibOrder.Order[] memory feeOrders,
bytes[] memory feeSignatures
)
private
returns (FillResults memory totalFillResults)
{
uint256 totalZrxFeeAmount;
uint256 ordersLength = orders.length;
uint256[] memory takerAssetFillAmounts = new uint256[](ordersLength);
for (uint256 i = 0; i < ordersLength; i++) {
// Total up the fees
totalZrxFeeAmount = safeAdd(totalZrxFeeAmount, orders[i].takerFee);
// We assume that asset being bought by taker is the same for each order.
// Rather than passing this in as calldata, we set the takerAssetData as WETH asset data
orders[i].takerAssetData = WETH_ASSET_DATA;
// Populate takerAssetFillAmounts for later batchFill
takerAssetFillAmounts[i] = orders[i].takerAssetAmount;
}
if (totalZrxFeeAmount > 0) {
// Fees are required for these orders. Buy enough ZRX to cover the future fill
FillResults memory zrxMarketBuyResults = marketBuyZrxInternal(
feeOrders,
feeSignatures,
totalZrxFeeAmount
);
totalFillResults.takerFeePaid = zrxMarketBuyResults.takerFeePaid;
totalFillResults.takerAssetFilledAmount = zrxMarketBuyResults.takerAssetFilledAmount;
}
FillResults memory batchFillResults = EXCHANGE.batchFillOrKillOrders(
orders,
takerAssetFillAmounts,
signatures
);
addFillResults(totalFillResults, batchFillResults);
require(
isAcceptableThreshold(
totalFillResults.takerAssetFilledAmount,
batchFillResults.takerAssetFilledAmount
),
"UNACCEPTABLE_THRESHOLD"
);
// Transfer all of the tokens filled from the batchFill
for (i = 0; i < ordersLength; i++) {
transferERC721Token(
orders[i].makerAssetData,
msg.sender
);
}
return totalFillResults;
}
}
