/* $Id$ */ #include "bbs.h" #define FN_REGISTER_LOG "register.log" // global registration history #define FN_REJECT_NOTIFY "justify.reject" #define FN_NOTIN_WHITELIST_NOTICE "etc/whitemail.notice" // Regform1 file name (deprecated) #define fn_register "register.new" // New style (Regform2) file names: #define FN_REGFORM "regform" // registration form in user home #define FN_REGFORM_LOG "regform.log" // regform history in user home #define FN_REQLIST "reg.wait" // request list file, in global directory (replacing fn_register) #define FN_REJECT_NOTES "etc/reg_reject.notes" #define FN_JOBSPOOL_DIR "jobspool/" // #define DBG_DISABLE_CHECK // disable all input checks // #define DBG_DRYRUN // Dry-run test (mainly for RegForm2) #define MSG_ERR_MAXTRIES "您嘗試錯誤的輸入次數太多，請下次再來吧" #define MSG_ERR_TOO_OLD "年份可能有誤。 若這是您的真實生日請另行通知站務處理" #define MSG_ERR_TOO_YOUNG "年份有誤。 嬰兒/未出生應該無法使用 BBS..." #define DATE_SAMPLE "1911/2/29" //////////////////////////////////////////////////////////////////////////// // Value Validation //////////////////////////////////////////////////////////////////////////// static int HaveRejectStr(const char *s, const char **rej) { int i; char *rejectstr[] = {"幹", "不", "你媽", "某", "笨", "呆", "..", "xx", "你管", "管我", "猜", "天才", "超人", /* "阿", (某些住址有) */ "ㄅ", "ㄆ", "ㄇ", "ㄈ", "ㄉ", "ㄊ", "ㄋ", "ㄌ", "ㄍ", "ㄎ", "ㄏ", "ㄐ", "ㄑ", "ㄒ", "ㄓ", "ㄔ", "ㄕ", "ㄖ", "ㄗ", "ㄘ", "ㄙ", "ㄧ", "ㄨ", "ㄩ", "ㄚ", "ㄛ", "ㄜ", "ㄝ", "ㄞ", "ㄟ", "ㄠ", "ㄡ", "ㄢ", "ㄣ", "ㄤ", "ㄥ", "ㄦ", NULL}; if( rej != NULL ) for( i = 0 ; rej[i] != NULL ; ++i ) if( DBCS_strcasestr(s, rej[i]) ) return 1; for( i = 0 ; rejectstr[i] != NULL ; ++i ) if( DBCS_strcasestr(s, rejectstr[i]) ) return 1; return 0; } static int removespace(char *s) { int i, index; for (i = 0, index = 0; s[i]; i++) { if (s[i] != ' ') s[index++] = s[i]; } s[index] = '\0'; return index; } int reserved_user_id(const char *userid) { if (file_exist_record(FN_RESERVED_ID, userid)) return 1; return 0; } int bad_user_id(const char *userid) { if(!is_validuserid(userid)) return 1; #if defined(STR_REGNEW) if (strcasecmp(userid, STR_REGNEW) == 0) return 1; #endif #if defined(STR_GUEST) && !defined(NO_GUEST_ACCOUNT_REG) if (strcasecmp(userid, STR_GUEST) == 0) return 1; #endif /* in2: 原本是用strcasestr, 不過有些人中間剛剛好出現這個字應該還算合理吧? */ if( strncasecmp(userid, "fuck", 4) == 0 || strncasecmp(userid, "shit", 4) == 0 ) return 1; /* * while((ch = *(++userid))) if(not_alnum(ch)) return 1; */ return 0; } static char * isvalidname(char *rname) { #ifdef FOREIGN_REG return NULL; #else const char *rejectstr[] = {"肥", "胖", "豬頭", "小白", "小明", "路人", "老王", "老李", "寶貝", "先生", "帥哥", "老頭", "小姊", "小姐", "美女", "小妹", "大頭", "公主", "同學", "寶寶", "公子", "大頭", "小小", "小弟", "小妹", "妹妹", "嘿", "嗯", "爺爺", "大哥", "無", NULL}; if( removespace(rname) && rname[0] < 0 && strlen(rname) >= 4 && !HaveRejectStr(rname, rejectstr) && strncmp(rname, "小", 2) != 0 && //起頭是「小」 strncmp(rname, "我是", 4) != 0 && //起頭是「我是」 !(strlen(rname) == 4 && strncmp(&rname[2], "兒", 2) == 0) && !(strlen(rname) >= 4 && strncmp(&rname[0], &rname[2], 2) == 0)) return NULL; return "您的輸入似乎不正確"; #endif } static char * isvalidcareer(char *career) { #ifndef FOREIGN_REG const char *rejectstr[] = {NULL}; if (!(career[0] < 0 && strlen(career) >= 6) || strcmp(career, "家裡") == 0 || HaveRejectStr(career, rejectstr) ) return "您的輸入似乎不正確"; if (strcmp(&career[strlen(career) - 2], "大") == 0 || strcmp(&career[strlen(career) - 4], "大學") == 0 || strcmp(career, "學生大學") == 0) return "麻煩請加學校系所"; if (strcmp(career, "學生高中") == 0) return "麻煩輸入學校名稱"; #else if( strlen(career) < 6 ) return "您的輸入不正確"; #endif if (DBCS_strcasestr(career, "學") && DBCS_strcasestr(career, "系") && DBCS_strcasestr(career, "級") == 0 && (DBCS_strcasestr(career, "畢") == 0 && DBCS_strcasestr(career, "肄") == 0)) return "請加上年級"; return NULL; } static int strlen_without_space(const char *s) { int i = 0; while (*s) if (*s++ != ' ') i++; return i; } static char * isvalidaddr(char *addr) { const char *rejectstr[] = {"地球", "銀河", "火星", NULL}; #ifdef DBG_DISABLE_CHECK return NULL; #endif // DBG_DISABLE_CHECK // addr[0] > 0: check if address is starting by Chinese. if (DBCS_strcasestr(addr, "信箱") != 0 || DBCS_strcasestr(addr, "郵政") != 0) return "抱歉我們不接受郵政信箱"; if (strlen_without_space(addr) < 15 || (DBCS_strcasestr(addr, "市") == 0 && DBCS_strcasestr(addr, "巿") == 0 && DBCS_strcasestr(addr, "縣") == 0 && DBCS_strcasestr(addr, "室") == 0) || strcmp(&addr[strlen(addr) - 2], "段") == 0 || strcmp(&addr[strlen(addr) - 2], "路") == 0 || strcmp(&addr[strlen(addr) - 2], "巷") == 0 || strcmp(&addr[strlen(addr) - 2], "弄") == 0 || strcmp(&addr[strlen(addr) - 2], "區") == 0 || strcmp(&addr[strlen(addr) - 2], "市") == 0 || strcmp(&addr[strlen(addr) - 2], "街") == 0 ) return "這個地址似乎並不完整"; if (HaveRejectStr(addr, rejectstr)) return "這個地址似乎有誤"; return NULL; } static char * isvalidphone(char *phone) { int i; #ifdef DBG_DISABLE_CHECK return NULL; #endif // DBG_DISABLE_CHECK for( i = 0 ; phone[i] != 0 ; ++i ) if( !isdigit((int)phone[i]) ) return "請不要加分隔符號"; if (!removespace(phone) || strlen(phone) < 9 || strstr(phone, "00000000") != NULL || strstr(phone, "22222222") != NULL ) { return "這個電話號碼並不正確(請含區碼)" ; } return NULL; } //////////////////////////////////////////////////////////////////////////// // Account Expiring //////////////////////////////////////////////////////////////////////////// /* -------------------------------- */ /* New policy for allocate new user */ /* (a) is the worst user currently */ /* (b) is the object to be compared */ /* -------------------------------- */ static int compute_user_value(const userec_t * urec, time4_t clock) { int value; /* if (urec) has XEMPT permission, don't kick it */ if ((urec->userid[0] == '\0') || (urec->userlevel & PERM_XEMPT) /* || (urec->userlevel & PERM_LOGINOK) */ || !strcmp(STR_GUEST, urec->userid)) return 999999; value = (clock - urec->lastlogin) / 60; /* minutes */ #ifdef STR_REGNEW /* new user should register in 30 mins */ // XXX 目前 new acccount 並不會在 utmp 裡放 STR_REGNEW... if (strcmp(urec->userid, STR_REGNEW) == 0) return 30 - value; #endif #if 0 if (!urec->numlogins) /* 未 login 成功者，不保留 */ return -1; if (urec->numlogins <= 3) /* #login 少於三者，保留 20 天 */ return 20 * 24 * 60 - value; #endif /* 未完成註冊者，保留 15 天 */ /* 一般情況，保留 120 天 */ return (urec->userlevel & PERM_LOGINOK ? 120 : 15) * 24 * 60 - value; } int check_and_expire_account(int uid, const userec_t * urec, int expireRange) { char genbuf[200]; int val; if ((val = compute_user_value(urec, now)) < 0) { snprintf(genbuf, sizeof(genbuf), "#%d %-12s %s %d %d %d", uid, urec->userid, Cdatelite(&(urec->lastlogin)), urec->numlogins, urec->numposts, val); // 若超過 expireRange 則砍人， // 不然就 return 0 if (-val > expireRange) { log_usies("DATED", genbuf); // log_usies("CLEAN", genbuf); kill_user(uid, urec->userid); } else val = 0; } return val; } //////////////////////////////////////////////////////////////////////////// // Regcode Support //////////////////////////////////////////////////////////////////////////// #define REGCODE_INITIAL "v6" // always 2 characters static char * getregfile(char *buf) { // not in user's home because s/he could zip his/her home snprintf(buf, PATHLEN, FN_JOBSPOOL_DIR ".regcode.%s", cuser.userid); return buf; } static char * makeregcode(char *buf) { char fpath[PATHLEN]; int fd, i; // prevent ambigious characters: oOlI const char *alphabet = "qwertyuipasdfghjkzxcvbnmoQWERTYUPASDFGHJKLZXCVBNM"; /* generate a new regcode */ buf[13] = 0; buf[0] = REGCODE_INITIAL[0]; buf[1] = REGCODE_INITIAL[1]; for( i = 2 ; i < 13 ; ++i ) buf[i] = alphabet[random() % strlen(alphabet)]; getregfile(fpath); if( (fd = open(fpath, O_WRONLY | O_CREAT, 0600)) == -1 ){ perror("open"); exit(1); } write(fd, buf, 13); close(fd); return buf; } static char * getregcode(char *buf) { int fd; char fpath[PATHLEN]; getregfile(fpath); if( (fd = open(fpath, O_RDONLY)) == -1 ){ buf[0] = 0; return buf; } read(fd, buf, 13); close(fd); buf[13] = 0; return buf; } void delregcodefile(void) { char fpath[PATHLEN]; getregfile(fpath); unlink(fpath); } //////////////////////////////////////////////////////////////////////////// // Figlet Captcha System //////////////////////////////////////////////////////////////////////////// #ifdef USE_FIGLET_CAPTCHA static int gen_captcha(char *buf, int szbuf, char *fpath) { // do not use: GQV const char *alphabet = "ABCDEFHIJKLMNOPRSTUWXYZ"; int calphas = strlen(alphabet); char cmd[PATHLEN], opts[PATHLEN]; int i, coptSpace, coptFont; static const char *optSpace[] = { "-S", "-s", "-k", "-W", // "-o", NULL }; static const char *optFont[] = { "banner", "big", "slant", "small", "smslant", "standard", // block family "block", "lean", // shadow family // "shadow", "smshadow", // mini (better with large spacing) // "mini", NULL }; // fill captcha code for (i = 0; i < szbuf-1; i++) buf[i] = alphabet[random() % calphas]; buf[i] = 0; // szbuf-1 // decide options coptSpace = coptFont = 0; while (optSpace[coptSpace]) coptSpace++; while (optFont[coptFont]) coptFont++; snprintf(opts, sizeof(opts), "%s -f %s", optSpace[random() % coptSpace], optFont [random() % coptFont ]); // create file snprintf(fpath, PATHLEN, FN_JOBSPOOL_DIR ".captcha.%s", buf); snprintf(cmd, sizeof(cmd), FIGLET_PATH " %s %s > %s", opts, buf, fpath); // vmsg(cmd); if (system(cmd) != 0) return 0; return 1; } static int _vgetcb_data_upper(int key, VGET_RUNTIME *prt, void *instance) { if (key >= 'a' && key <= 'z') key = toupper(key); if (key < 'A' || key > 'Z') { bell(); return VGETCB_NEXT; } return VGETCB_NONE; } static int _vgetcb_data_post(int key, VGET_RUNTIME *prt, void *instance) { char *s = prt->buf; while (*s) { if (isascii(*s) && islower(*s)) *s = toupper(*s); s++; } return VGETCB_NONE; } static int verify_captcha() { char captcha[7] = "", code[STRLEN]; char fpath[PATHLEN]; VGET_CALLBACKS vge = { NULL, _vgetcb_data_upper, _vgetcb_data_post }; int tries = 0, i; do { // create new captcha if (tries % 2 == 0 || !captcha[0]) { // if generation failed, skip captcha. if (!gen_captcha(captcha, sizeof(captcha), fpath) || !dashf(fpath)) return 1; // prompt user about captcha vs_hdr("CAPTCHA 認證程序"); outs("為了確認您的註冊程序，請輸入下面圖樣顯示的文字。\n" "圖樣只會由大寫的 A-Z 英文字母組成。\n\n"); show_file(fpath, 4, b_lines-5, SHOWFILE_ALLOW_ALL); unlink(fpath); } // each run waits 10 seconds. for (i = 10; i > 0; i--) { move(b_lines-1, 0); clrtobot(); prints("請仔細檢查上面的圖形， %d 秒後即可輸入...", i); // flush out current input doupdate(); peek_input(0.1f, Ctrl('C')); drop_input(); sleep(1); } // input captcha move(b_lines-1, 0); clrtobot(); prints("請輸入圖樣顯示的 %d 個英文字母: ", (int)strlen(captcha)); vgetstring(code, strlen(captcha)+1, 0, "", &vge, NULL); if (code[0] && strcasecmp(code, captcha) == 0) break; // error case. if (++tries >= 10) return 0; // error vmsg("輸入錯誤，請重試。注意組成文字全是大寫英文字母。"); } while (1); clear(); return 1; } #else // !USE_FIGLET_CAPTCHA static int verify_captcha() { return 1; } #endif // !USE_FIGLET_CAPTCHA //////////////////////////////////////////////////////////////////////////// // Justify Utilities //////////////////////////////////////////////////////////////////////////// static void email_justify(const userec_t *muser) { char buf[256], genbuf[256]; /* * It is intended to use BBSENAME instead of BBSNAME here. * Because recently many poor users with poor mail clients * (or evil mail servers) cannot handle/decode Chinese * subjects (BBSNAME) correctly, so we'd like to use * BBSENAME here to prevent subject being messed up. * And please keep BBSENAME short or it may be truncated * by evil mail servers. */ snprintf(buf, sizeof(buf), " " BBSENAME " - [ %s ]", makeregcode(genbuf)); #ifdef HAVEMOBILE if (strcmp(muser->email, "m") == 0 || strcmp(muser->email, "M") == 0) mobile_message(mobile, buf); else #endif bsmtp("etc/registermail", buf, muser->email, "non-exist"); move(20,0); clrtobot(); outs("我們即將寄出認證信 (您應該會在 10 分鐘內收到)\n" "收到後您可以根據認證信標題的認證碼\n" "輸入到 (U)ser -> (R)egister 後就可以完成註冊"); pressanykey(); return; } /* 使用者填寫註冊表格 */ static void getfield(int line, const char *info, const char *desc, char *buf, int len) { char prompt[STRLEN]; char genbuf[200]; // clear first move(line+1, 0); clrtoeol(); move(line, 0); clrtoeol(); prints(" 原先設定：%-30.30s (%s)", buf, info); snprintf(prompt, sizeof(prompt), " %s：", desc); if (getdata_str(line + 1, 0, prompt, genbuf, len, DOECHO, buf)) strcpy(buf, genbuf); move(line+1, 0); clrtoeol(); move(line, 0); clrtoeol(); prints(" %s：%s", desc, buf); } int setupnewuser(const userec_t *user) { char genbuf[50]; char *fn_fresh = ".fresh"; userec_t utmp; time_t clock; struct stat st; int fd, uid; clock = now; // XXX race condition... if (dosearchuser(user->userid, NULL)) { vmsg("手腳不夠快，別人已經搶走了！"); exit(1); } /* Lazy method : 先找尋已經清除的過期帳號 */ if ((uid = dosearchuser("", NULL)) == 0) { /* 每 1 個小時，清理 user 帳號一次 */ if ((stat(fn_fresh, &st) == -1) || (st.st_mtime < clock - 3600)) { if ((fd = open(fn_fresh, O_RDWR | O_CREAT, 0600)) == -1) return -1; write(fd, ctime(&clock), 25); close(fd); log_usies("CLEAN", "dated users"); fprintf(stdout, "尋找新帳號中, 請稍待片刻...\n\r"); if ((fd = open(fn_passwd, O_RDWR | O_CREAT, 0600)) == -1) return -1; /* 不曉得為什麼要從 2 開始... Ptt:因為SYSOP在1 */ for (uid = 2; uid <= MAX_USERS; uid++) { passwd_query(uid, &utmp); // tolerate for one year. check_and_expire_account(uid, &utmp, 365*12*60); } } } /* initialize passwd semaphores */ if (passwd_init()) exit(1); passwd_lock(); uid = dosearchuser("", NULL); if ((uid <= 0) || (uid > MAX_USERS)) { passwd_unlock(); vmsg("抱歉，使用者帳號已經滿了，無法註冊新的帳號"); exit(1); } setuserid(uid, user->userid); snprintf(genbuf, sizeof(genbuf), "uid %d", uid); log_usies("APPLY", genbuf); SHM->money[uid - 1] = user->money; if (passwd_update(uid, (userec_t *)user) == -1) { passwd_unlock(); vmsg("客滿了，再見！"); exit(1); } passwd_unlock(); return uid; } ///////////////////////////////////////////////////////////////////////////// // New Registration (Phase 1: Create Account) ///////////////////////////////////////////////////////////////////////////// void new_register(void) { userec_t newuser; char passbuf[STRLEN]; int try, id, uid; char *errmsg = NULL; #ifdef HAVE_USERAGREEMENT int haveag = more(HAVE_USERAGREEMENT, YEA); while( haveag != -1 ){ int c = vans("請問您接受這份使用者條款嗎? (yes/no) "); if (c == 'y') break; else if (c == 'n') { vmsg("抱歉, 您須要接受使用者條款才能註冊帳號享受我們的服務唷!"); exit(1); } vmsg("請輸入 y表示接受, n表示不接受"); } #endif // setup newuser memset(&newuser, 0, sizeof(newuser)); newuser.version = PASSWD_VERSION; newuser.userlevel = PERM_DEFAULT; newuser.uflag = BRDSORT_FLAG | MOVIE_FLAG; newuser.uflag2 = 0; newuser.firstlogin = newuser.lastlogin = now; newuser.pager = PAGER_ON; strlcpy(newuser.lasthost, fromhost, sizeof(newuser.lasthost)); #ifdef DBCSAWARE if(u_detectDBCSAwareEvilClient()) newuser.uflag &= ~DBCSAWARE_FLAG; else newuser.uflag |= DBCSAWARE_FLAG; #endif more("etc/register", NA); try = 0; while (1) { userec_t xuser; int minute; if (++try >= 6) { vmsg(MSG_ERR_MAXTRIES); exit(1); } getdata(17, 0, msg_uid, newuser.userid, sizeof(newuser.userid), DOECHO); strcpy(passbuf, newuser.userid); if (bad_user_id(passbuf)) outs("無法接受這個代號，請使用英文字母，並且不要包含空格\n"); else if ((id = getuser(passbuf, &xuser)) && // >=: see check_and_expire_account definition (minute = check_and_expire_account(id, &xuser, 0)) >= 0) { if (minute == 999999) // XXX magic number. It should be greater than MAX_USERS at least. outs("此代號已經有人使用 是不死之身"); else { prints("此代號已經有人使用 還有 %d 天才過期 \n", minute / (60 * 24) + 1); } } else if (reserved_user_id(passbuf)) outs("此代號已由系統保留，請使用別的代號\n"); else // success break; } // XXX 記得最後 create account 前還要再檢查一次 acc try = 0; while (1) { if (++try >= 6) { vmsg(MSG_ERR_MAXTRIES); exit(1); } move(20, 0); clrtoeol(); outs(ANSI_COLOR(1;33) "為避免被偷看，您的密碼並不會顯示在畫面上，直接輸入完後按 Enter 鍵即可。\n" "另外請注意密碼只有前八個字元有效，超過的將自動忽略。" ANSI_RESET); if ((getdata(18, 0, "請設定密碼：", passbuf, sizeof(passbuf), NOECHO) < 3) || !strcmp(passbuf, newuser.userid)) { outs("密碼太簡單，易遭入侵，至少要 4 個字，請重新輸入\n"); continue; } strlcpy(newuser.passwd, passbuf, PASSLEN); getdata(19, 0, "請檢查密碼：", passbuf, sizeof(passbuf), NOECHO); if (strncmp(passbuf, newuser.passwd, PASSLEN)) { move(19, 0); outs("密碼輸入錯誤, 請重新輸入密碼.\n"); continue; } passbuf[8] = '\0'; strlcpy(newuser.passwd, genpasswd(passbuf), PASSLEN); break; } // set-up more information. move(19, 0); clrtobot(); // warning: because currutmp=NULL, we can simply pass newuser.* to getdata. // DON'T DO THIS IF YOUR currutmp != NULL. try = 0; while (strlen(newuser.nickname) < 2) { if (++try > 10) { vmsg(MSG_ERR_MAXTRIES); exit(1); } getdata(19, 0, "綽號暱稱：", newuser.nickname, sizeof(newuser.nickname), DOECHO); } try = 0; while (strlen(newuser.realname) < 4) { if (++try > 10) { vmsg(MSG_ERR_MAXTRIES); exit(1); } getdata(20, 0, "真實姓名：", newuser.realname, sizeof(newuser.realname), DOECHO); if ((errmsg = isvalidname(newuser.realname))) { memset(newuser.realname, 0, sizeof(newuser.realname)); vmsg(errmsg); } } try = 0; while (strlen(newuser.address) < 8) { // do not use isvalidaddr to check, // because that requires foreign info. if (++try > 10) { vmsg(MSG_ERR_MAXTRIES); exit(1); } getdata(21, 0, "聯絡地址：", newuser.address, sizeof(newuser.address), DOECHO); } try = 0; while (newuser.year < 40) // magic number 40: see user.c { char birthday[sizeof("mmmm/yy/dd ")]; int y, m, d; struct tm tm; localtime4_r(&now, &tm); if (++try > 20) { vmsg(MSG_ERR_MAXTRIES); exit(1); } getdata(22, 0, "生日 (西元年/月/日, 如 " DATE_SAMPLE ")：", birthday, sizeof(birthday), DOECHO); if (strcmp(birthday, DATE_SAMPLE) == 0) { vmsg("不要複製範例！ 請輸入你真實生日"); continue; } if (ParseDate(birthday, &y, &m, &d)) { vmsg("日期格式不正確"); continue; } else if (y < 1930) { vmsg(MSG_ERR_TOO_OLD); continue; } else if (y+3 > tm.tm_year+1900) { vmsg(MSG_ERR_TOO_YOUNG); continue; } newuser.year = (unsigned char)(y-1900); newuser.month = (unsigned char)m; newuser.day = (unsigned char)d; } if (!verify_captcha()) { vmsg(MSG_ERR_MAXTRIES); exit(1); } setupnewuser(&newuser); if( (uid = initcuser(newuser.userid)) < 0) { vmsg("無法建立帳號"); exit(1); } log_usies("REGISTER", fromhost); } int check_regmail(char *email) { FILE *fp; char buf[128], *c; int allow = 0; c = strchr(email, '@'); if (c == NULL) return 0; // reject multiple '@' if (c != strrchr(email, '@')) { vmsg("E-Mail 的格式不正確。"); return 0; } // domain tolower str_lower(c, c); // allow list allow = 0; if ((fp = fopen("etc/whitemail", "rt"))) { while (fgets(buf, sizeof(buf), fp)) { if (buf[0] == '#') continue; chomp(buf); c = buf+1; // vmsgf("%c %s %s",buf[0], c, email); switch(buf[0]) { case 'A': if (strcasecmp(c, email) == 0) allow = 1; break; case 'P': if (strcasestr(email, c)) allow = 1; break; case 'S': if (strcasecmp(strstr(email, "@") + 1, c) == 0) allow = 1; break; case '%': allow = 1; break; // allow all // domain match (*@c | *@*.c) case 'D': if (strlen(email) > strlen(c)) { // c2 points to starting of possible c. const char *c2 = email + strlen(email) - strlen(c); if (strcasecmp(c2, c) != 0) break; c2--; if (*c2 == '.' || *c2 == '@') allow = 1; } break; } if (allow) break; } fclose(fp); if (!allow) { // show whitemail notice if it exists. if (dashf(FN_NOTIN_WHITELIST_NOTICE)) { VREFSCR scr = vscr_save(); more(FN_NOTIN_WHITELIST_NOTICE, NA); pressanykey(); vscr_restore(scr); } else vmsg("抱歉，目前不接受此 Email 的註冊申請。"); return 0; } } // reject list allow = 1; if ((fp = fopen("etc/banemail", "r"))) { while (allow && fgets(buf, sizeof(buf), fp)) { if (buf[0] == '#') continue; chomp(buf); c = buf+1; switch(buf[0]) { case 'A': if (strcasecmp(c, email) == 0) { allow = 0; // exact match vmsg("此電子信箱已被禁止註冊"); } break; case 'P': if (strcasestr(email, c)) { allow = 0; vmsg("此信箱已被禁止用於註冊 (可能是免費信箱)"); } break; case 'S': if (strcasecmp(strstr(email, "@") + 1, c) == 0) { allow = 0; vmsg("此信箱已被禁止用於註冊 (可能是免費信箱)"); } break; case 'D': if (strlen(email) > strlen(c)) { // c2 points to starting of possible c. const char *c2 = email + strlen(email) - strlen(c); if (strcasecmp(c2, c) != 0) break; c2--; if (*c2 == '.' || *c2 == '@') { vmsg("此信箱的網域已被禁止用於註冊 (可能是免費信箱)"); allow = 0; } } break; } } fclose(fp); } return allow; } void check_birthday(void) { // check birthday int changed = 0; time_t t = (time_t)now; struct tm tm; localtime_r(&t, &tm); while ( cuser.year < 40 || // magic number 40: see user.c cuser.year+3 > tm.tm_year) { char birthday[sizeof("mmmm/yy/dd ")]; int y, m, d; clear(); vs_hdr("輸入生日"); move(2,0); outs("本站為配合實行內容分級制度，請您輸入正確的生日資訊。"); getdata(5, 0, "生日 (西元年/月/日, 如 " DATE_SAMPLE ")：", birthday, sizeof(birthday), DOECHO); if (strcmp(birthday, DATE_SAMPLE) == 0) { vmsg("不要複製範例！ 請輸入你真實生日"); continue; } if (ParseDate(birthday, &y, &m, &d)) { vmsg("日期格式不正確"); continue; } else if (y < 1930) { vmsg(MSG_ERR_TOO_OLD); continue; } else if (y+3 > tm.tm_year+1900) { vmsg(MSG_ERR_TOO_YOUNG); continue; } cuser.year = (unsigned char)(y-1900); cuser.month = (unsigned char)m; cuser.day = (unsigned char)d; changed = 1; } if (changed) { clear(); resolve_over18(); } } ///////////////////////////////////////////////////////////////////////////// // User Registration (Phase 2: Validation) ///////////////////////////////////////////////////////////////////////////// void check_register(void) { char fn[PATHLEN]; // 已經通過的就不用了 if (HasUserPerm(PERM_LOGINOK) || HasUserPerm(PERM_SYSOP)) return; // 基本權限被拔應該是要讓他不能註冊用。 if (!HasUserPerm(PERM_BASIC)) return; /* * 避免使用者被退回註冊單後，在知道退回的原因之前， * 又送出一次註冊單。 */ setuserfile(fn, FN_REJECT_NOTIFY); if (dashf(fn)) { int xun = 0, abort = 0; userec_t u = {0}; char buf[PATHLEN] = ""; FILE *fp = fopen(fn, "rt"); // load reference fgets(buf, sizeof(buf), fp); fclose(fp); // parse reference if (buf[0] == '#') { xun = atoi(buf+1); if (xun < 0 || xun >= MAX_USERS || passwd_query(xun, &u) < 0 || !(u.userlevel & (PERM_ACCOUNTS | PERM_ACCTREG))) memset(&u, 0, sizeof(u)); // now u is valid only if reference is loaded with account sysop. } // show message. more(fn, YEA); move(b_lines-4, 0); clrtobot(); outs("\n" ANSI_COLOR(1;31) "前次註冊單審查失敗。 (本記錄已備份於您的信箱中)\n" "請重新申請並照上面指示正確填寫註冊單。\n"); if (u.userid[0]) outs("如有任何問題或需要與站務人員聯絡請按 r 回信。"); outs(ANSI_RESET "\n"); // force user to confirm. while (!abort) { switch(vans(u.userid[0] ? "請輸入 y 繼續或輸入 r 回信給站務: " : "請輸入 y 繼續: ")) { case 'y': abort = 1; break; case 'r': if (!u.userid[0]) break; // mail to user setuserfile(quote_file, FN_REJECT_NOTIFY); strlcpy(quote_user, "[退註通知]", sizeof(quote_user)); clear(); do_innersend(u.userid, NULL, "[註冊問題] 退註相關問題"); abort = 1; // quick return to avoid confusing user unlink(fn); return; break; default: bell(); break; } } unlink(fn); } /* 回覆過身份認證信函，或曾經 E-mail post 過 */ clear(); move(9, 0); // 無法使用註冊碼 = 被退註的，提示一下? // (u_register 裡面會 vmsg) if (HasUserPerm(PERM_NOREGCODE)) { } outs(" 您目前尚未通過註冊認證程序，請細詳填寫" ANSI_COLOR(32) "註冊申請單" ANSI_RESET "，\n" " 通告站長以獲得進階使用權力。\n\n"); outs(" 如果您之前曾使用 email 等認證方式通過註冊認證但又看到此訊息，\n" " 代表您的認證由於資料不完整已被取消。\n"); u_register(); #ifdef NEWUSER_LIMIT if (cuser.lastlogin - cuser->firstlogin < 3 * DAY_SECONDS) cuser.userlevel &= ~PERM_POST; more("etc/newuser", YEA); #endif } static int create_regform_request() { FILE *fn; char fname[PATHLEN]; setuserfile(fname, FN_REGFORM); fn = fopen(fname, "wt"); // regform 2: replace model if (!fn) return 0; // create request data fprintf(fn, "uid: %s\n", cuser.userid); fprintf(fn, "name: %s\n", cuser.realname); fprintf(fn, "career: %s\n", cuser.career); fprintf(fn, "addr: %s\n", cuser.address); fprintf(fn, "phone: %s\n", cuser.phone); fprintf(fn, "email: %s\n", "x"); // email is apparently 'x' here. fprintf(fn, "----\n"); fclose(fn); // regform2 must update request list file_append_record(FN_REQLIST, cuser.userid); // save justify information snprintf(cuser.justify, sizeof(cuser.justify), ""); return 1; } static void toregister(char *email) { clear(); vs_hdr("認證設定"); if (cuser.userlevel & PERM_NOREGCODE){ strcpy(email, "x"); goto REGFORM2; } move(1, 0); outs("您好, 本站認證認證的方式有:\n" " 1.若您有 E-Mail (本站不接受 yahoo, kimo等免費的 E-Mail)\n" " 請輸入您的 E-Mail , 我們會寄發含有認證碼的信件給您\n" " 收到後請到 (U)ser => (R)egister 輸入認證碼, 即可通過認證\n" "\n" " 2.若您沒有 E-Mail 或是一直無法收到認證信, 請輸入 x \n" " 會有站長親自人工審核註冊資料，" ANSI_COLOR(1;33) "但注意這可能會花上數週或更多時間。" ANSI_RESET "\n" "**********************************************************\n" "* 注意! *\n" "* 通常應該會在輸入完成後十分鐘內收到認證信, 若過久未收到 *\n" "* 請到郵件垃圾桶檢查是否被當作垃圾信(SPAM)了，另外若是 *\n" "* 輸入後發生認證碼錯誤請重填一次 E-Mail *\n" "**********************************************************\n"); #ifdef HAVEMOBILE outs(" 3.若您有手機門號且想採取手機簡訊認證的方式 , 請輸入 m \n" " 我們將會寄發含有認證碼的簡訊給您 \n" " 收到後請到(U)ser => (R)egister 輸入認證碼, 即可通過認證\n"); #endif while (1) { email[0] = 0; getfield(15, "身分認證用", "E-Mail Address", email, 50); strip_blank(email, email); if (strcmp(email, "X") == 0) email[0] = 'x'; if (strcmp(email, "x") == 0) break; #ifdef HAVEMOBILE else if (strcmp(email, "m") == 0 || strcmp(email, "M") == 0) { if (isvalidmobile(mobile)) { char yn[3]; getdata(16, 0, "請再次確認您輸入的手機號碼正確嘛? [y/N]", yn, sizeof(yn), LCECHO); if (yn[0] == 'Y' || yn[0] == 'y') break; } else { move(15, 0); clrtobot(); move(17, 0); outs("指定的手機號碼不正確," "若您無手機門號請選擇其他方式認證"); } } #endif else if (check_regmail(email)) { char yn[3]; #ifdef USE_EMAILDB int email_count = emaildb_check_email(email, strlen(email)); if (email_count < 0) { move(15, 0); clrtobot(); move(17, 0); outs("暫時不允許\ email 認證註冊, 請稍後再試\n"); pressanykey(); return; } else if (email_count >= EMAILDB_LIMIT) { move(15, 0); clrtobot(); move(17, 0); outs("指定的 E-Mail 已註冊過多帳號, 請使用其他 E-Mail, 或輸入 x 採手動認證\n"); outs("但注意手動認證通常會花上數週以上的時間。\n"); } else { #endif move(18, 0); outs(ANSI_COLOR(1;31) "提醒您: 如果之後發現您輸入的註冊資料有問題，不僅註冊會被取消，\n" "原本認證用的 E-mail 也不能再用來認證。\n" ANSI_RESET); getdata(16, 0, "請再次確認您輸入的 E-Mail 位置正確嘛? [y/N]", yn, sizeof(yn), LCECHO); clrtobot(); if (yn[0] == 'Y' || yn[0] == 'y') break; #ifdef USE_EMAILDB } #endif } else { move(15, 0); clrtobot(); move(17, 0); outs("指定的 E-Mail 不正確。可能你輸入的是免費的Email，\n"); outs("或曾有使用者以本 E-Mail 認證後被取消資格。\n\n"); outs("若您無 E-Mail 請輸入 x 由站長手動認證，\n"); outs("但注意手動認證通常會花上數週以上的時間。\n"); } } #ifdef USE_EMAILDB if (emaildb_update_email(cuser.userid, strlen(cuser.userid), email, strlen(email)) < 0) { move(15, 0); clrtobot(); move(17, 0); outs("暫時不允許\ email 認證註冊, 請稍後再試\n"); pressanykey(); return; } #endif strlcpy(cuser.email, email, sizeof(cuser.email)); REGFORM2: if (strcasecmp(email, "x") == 0) { /* 手動認證 */ if (!create_regform_request()) { vmsg("註冊申請單建立失敗。請至 " BN_BUGREPORT " 報告。"); } } else { // register by mail or mobile snprintf(cuser.justify, sizeof(cuser.justify), ""); #ifdef HAVEMOBILE if (phone != NULL && email[1] == 0 && tolower(email[0]) == 'm') snprintf(cuser.justify, sizeof(cuser.justify), ""); #endif email_justify(&cuser); } } int u_register(void) { char rname[20], addr[50], mobile[16]; #ifdef FOREIGN_REG char fore[2]; #endif char phone[20], career[40], email[50], birthday[11], sex_is[2]; unsigned char year, mon, day; char inregcode[14], regcode[50]; char ans[3], *errcode; int i = 0; if (cuser.userlevel & PERM_LOGINOK) { outs("您的身份確認已經完成，不需填寫申請表"); return XEASY; } // TODO REGFORM 2 checks 2 parts. i = file_find_record(FN_REQLIST, cuser.userid); if (i > 0) { vs_hdr("註冊單尚在處理中"); move(3, 0); prints(" 您的註冊申請單尚在處理中(處理順位: %d)，請耐心等候\n\n", i); outs(" * 如果您之前曾使用 email 等認證方式通過註冊認證但又看到此訊息，\n" " 代表您的認證由於資料不完整已被取消。\n\n" " * 如果您已收到註冊碼卻看到這個畫面，代表您在使用 Email 註冊後\n" " " ANSI_COLOR(1;31) "又另外申請了站長直接人工審核的註冊申請單。" ANSI_RESET "\n" " 進入人工審核程序後 Email 註冊碼自動失效，要等到審核完成\n" " (會多花很多時間，數天到數週是正常的) ，所以請耐心等候。\n\n"); vmsg("您的註冊申請單尚在處理中"); return FULLUPDATE; } strlcpy(rname, cuser.realname, sizeof(rname)); strlcpy(addr, cuser.address, sizeof(addr)); strlcpy(email, cuser.email, sizeof(email)); strlcpy(career,cuser.career, sizeof(career)); strlcpy(phone, cuser.phone, sizeof(phone)); if (cuser.mobile) snprintf(mobile, sizeof(mobile), "0%09d", cuser.mobile); else mobile[0] = 0; if (cuser.month == 0 && cuser.day == 0 && cuser.year == 0) birthday[0] = 0; else snprintf(birthday, sizeof(birthday), "%04i/%02i/%02i", 1900 + cuser.year, cuser.month, cuser.day); sex_is[0] = (cuser.sex % 8) + '1'; sex_is[1] = 0; if (cuser.userlevel & PERM_NOREGCODE) { vmsg("您不被允許\使用認證碼認證。請填寫註冊申請單"); goto REGFORM; } // getregcode(regcode); // XXX why check by year? // birthday is moved to earlier, so let's check email instead. if (cuser.email[0] && // cuser.year != 0 && /* 已經第一次填過了~ ^^" */ strcmp(cuser.email, "x") != 0 && /* 上次手動認證失敗 */ strcmp(cuser.email, "X") != 0) { vs_hdr("EMail認證"); move(2, 0); prints("請輸入您的認證碼。(由 %s 開頭無空白的十三碼)\n" "或輸入 x 來重新填寫 E-Mail 或改由站長手動認證\n", REGCODE_INITIAL); inregcode[0] = 0; do{ getdata(10, 0, "您的認證碼：", inregcode, sizeof(inregcode), DOECHO); if( strcmp(inregcode, "x") == 0 || strcmp(inregcode, "X") == 0 ) break; if( strlen(inregcode) != 13 || inregcode[0] == ' ') vmsg("認證碼輸入不完整，總共應有十三碼，沒有空白字元。"); else if( inregcode[0] != REGCODE_INITIAL[0] || inregcode[1] != REGCODE_INITIAL[1] ) { /* old regcode */ vmsg("輸入的認證碼錯誤，" // "或因系統昇級已失效，" "請輸入 x 重填一次 E-Mail"); } else break; } while( 1 ); // make it case insensitive. if (strcasecmp(inregcode, getregcode(regcode)) == 0) { int unum; delregcodefile(); if ((unum = searchuser(cuser.userid, NULL)) == 0) { vmsg("系統錯誤，查無此人！"); u_exit("getuser error"); exit(0); } mail_muser(cuser, "[註冊成功\囉]", "etc/registeredmail"); #if FOREIGN_REG_DAY > 0 if(cuser.uflag2 & FOREIGN) mail_muser(cuser, "[出入境管理局]", "etc/foreign_welcome"); #endif cuser.userlevel |= (PERM_LOGINOK | PERM_POST); outs("\n註冊成功\, 重新上站後將取得完整權限\n" "請按下任一鍵跳離後重新上站~ :)"); snprintf(cuser.justify, sizeof(cuser.justify), ": %s", Cdate(&now)); pressanykey(); u_exit("registed"); exit(0); return QUIT; } else if (strcasecmp(inregcode, "x") != 0) { if (regcode[0]) { vmsg("認證碼錯誤！"); return FULLUPDATE; } else { vmsg("認證碼已過期，請重新註冊。"); toregister(email); return FULLUPDATE; } } else { toregister(email); return FULLUPDATE; } } REGFORM: getdata(b_lines - 1, 0, "您確定要填寫註冊單嗎(Y/N)？[N] ", ans, 3, LCECHO); if (ans[0] != 'y') return FULLUPDATE; move(2, 0); clrtobot(); while (1) { clear(); move(1, 0); prints("%s(%s) 您好，請據實填寫以下的資料:", cuser.userid, cuser.nickname); #ifdef FOREIGN_REG fore[0] = 'y'; fore[1] = 0; getfield(2, "Y/n", "是否現在住在台灣", fore, 2); if (fore[0] == 'n') fore[0] |= FOREIGN; else fore[0] = 0; #endif while (1) { getfield(8, #ifdef FOREIGN_REG "請用本名", #else "請用中文", #endif "真實姓名", rname, 20); if( (errcode = isvalidname(rname)) == NULL ) break; else vmsg(errcode); } move(11, 0); outs(" 請盡量詳細的填寫您的服務單位，大專院校請麻煩" "加" ANSI_COLOR(1;33) "系所" ANSI_RESET "，公司單位請加" ANSI_COLOR(1;33) "職稱" ANSI_RESET "，\n" " 暫無工作請麻煩填寫" ANSI_COLOR(1;33) "畢業學校" ANSI_RESET "。\n"); while (1) { getfield(9, "(畢業)學校(含" ANSI_COLOR(1;33) "系所年級" ANSI_RESET ")或單位職稱", "服務單位", career, 40); if( (errcode = isvalidcareer(career)) == NULL ) break; else vmsg(errcode); } move(10, 0); clrtobot(); while (1) { getfield(10, "含" ANSI_COLOR(1;33) "縣市" ANSI_RESET "及門寢號碼" "(台北請加" ANSI_COLOR(1;33) "行政區" ANSI_RESET ")", "目前住址", addr, sizeof(addr)); if( (errcode = isvalidaddr(addr)) == NULL #ifdef FOREIGN_REG || fore[0] #endif ) break; else vmsg(errcode); } while (1) { getfield(11, "不加-(), 包括長途區號", "連絡電話", phone, 11); if( (errcode = isvalidphone(phone)) == NULL ) break; else vmsg(errcode); } getfield(12, "只輸入數字 如:0912345678 (可不填)", "手機號碼", mobile, 20); while (1) { getfield(13, "西元/月月/日日 如: " DATE_SAMPLE , "生日", birthday, sizeof(birthday)); if (birthday[0] == 0) { snprintf(birthday, sizeof(birthday), "%04i/%02i/%02i", 1900 + cuser.year, cuser.month, cuser.day); mon = cuser.month; day = cuser.day; year = cuser.year; } else { int y, m, d; if (strcmp(birthday, DATE_SAMPLE) == 0) { vmsg("不要複製範例！ 請輸入你真實生日"); continue; } if (ParseDate(birthday, &y, &m, &d)) { vmsg("您的輸入不正確"); continue; } mon = (unsigned char)m; day = (unsigned char)d; year = (unsigned char)(y - 1900); } if (year < 40) { vmsg("您的輸入不正確"); continue; } break; } getfield(14, "1.♂男 2.♀女 ", "性別", sex_is, 2); getdata(20, 0, "以上資料是否正確(Y/N)？(Q)取消註冊 [N] ", ans, 3, LCECHO); if (ans[0] == 'q') return 0; if (ans[0] == 'y') break; } // copy values to cuser strlcpy(cuser.realname, rname, sizeof(cuser.realname)); strlcpy(cuser.address, addr, sizeof(cuser.address)); strlcpy(cuser.email, email, sizeof(cuser.email)); strlcpy(cuser.career, career, sizeof(cuser.career)); strlcpy(cuser.phone, phone, sizeof(cuser.phone)); cuser.mobile = atoi(mobile); cuser.sex = (sex_is[0] - '1') % 8; cuser.month = mon; cuser.day = day; cuser.year = year; #ifdef FOREIGN_REG if (fore[0]) cuser.uflag2 |= FOREIGN; else cuser.uflag2 &= ~FOREIGN; #endif // if reach here, email is apparently 'x'. toregister(email); // update cuser passwd_update(usernum, &cuser); return FULLUPDATE; } //////////////////////////////////////////////////////////////////////////// // Regform Utilities //////////////////////////////////////////////////////////////////////////// // TODO define and use structure instead, even in reg request file. typedef struct { // current format: // (optional) num: unum, date // [0] uid: xxxxx (IDLEN=12) // [1] name: RRRRRR (20) // [2] career: YYYYYYYYYYYYYYYYYYYYYYYYYY (40) // [3] addr: TTTTTTTTT (50) // [4] phone: 02DDDDDDDD (20) // [5] email: x (50) (deprecated) // [6] mobile: (deprecated) // [7] ---- userec_t u; // user record char online; } RegformEntry; // regform format utilities // regform loader: deprecated. // now we use real user record. /* int load_regform_entry(RegformEntry *pre, FILE *fp) { char buf[STRLEN]; char *v; memset(pre, 0, sizeof(RegformEntry)); while (fgets(buf, sizeof(buf), fp)) { if (buf[0] == '-') break; buf[sizeof(buf)-1] = 0; v = strchr(buf, ':'); if (v == NULL) continue; *v++ = 0; if (*v == ' ') v++; chomp(v); if (strcmp(buf, "uid") == 0) strlcpy(pre->u.userid, v, sizeof(pre->u.userid)); else if (strcmp(buf, "name") == 0) strlcpy(pre->u.realname, v, sizeof(pre->u.realname)); else if (strcmp(buf, "career") == 0) strlcpy(pre->u.career, v, sizeof(pre->u.career)); else if (strcmp(buf, "addr") == 0) strlcpy(pre->u.address, v, sizeof(pre->u.address)); else if (strcmp(buf, "phone") == 0) strlcpy(pre->u.phone, v, sizeof(pre->u.phone)); } return pre->u.userid[0] ? 1 : 0; } */ static int print_regform_entry(const RegformEntry *pre, FILE *fp, int close) { fprintf(fp, "uid: %s\n", pre->u.userid); fprintf(fp, "name: %s\n", pre->u.realname); fprintf(fp, "career: %s\n", pre->u.career); fprintf(fp, "addr: %s\n", pre->u.address); fprintf(fp, "phone: %s\n", pre->u.phone); if (close) fprintf(fp, "----\n"); return 1; } static int concat_regform_entry_localized(const RegformEntry *pre, char *result, int maxlen) { int len = strlen(result); len += snprintf(result + len, maxlen - len, "使用者ID: %s\n", pre->u.userid); len += snprintf(result + len, maxlen - len, "真實姓名: %s\n", pre->u.realname); len += snprintf(result + len, maxlen - len, "職業學校: %s\n", pre->u.career); len += snprintf(result + len, maxlen - len, "目前住址: %s\n", pre->u.address); len += snprintf(result + len, maxlen - len, "電話號碼: %s\n", pre->u.phone); len += snprintf(result + len, maxlen - len, "上站位置: %s\n", pre->u.lasthost); len += snprintf(result + len, maxlen - len, "----\n"); return 1; } static int print_regform_entry_localized(const RegformEntry *pre, FILE *fp) { char buf[STRLEN * 6]; concat_regform_entry_localized(pre, buf, sizeof(buf)); fputs(buf, fp); return 1; } int append_regform(const RegformEntry *pre, const char *logfn, const char *ext) { FILE *fout = fopen(logfn, "at"); if (!fout) return 0; print_regform_entry(pre, fout, 0); if (ext) { syncnow(); fprintf(fout, "Date: %s\n", Cdate(&now)); if (*ext) fprintf(fout, ext); } // close it fprintf(fout, "----\n"); fclose(fout); return 1; } // prototype declare static void regform_print_reasons(const char *reason, FILE *fp); static void regform_concat_reasons(const char *reason, char *result, int maxlen); int regform_estimate_queuesize() { return dashs(FN_REQLIST) / IDLEN; } ///////////////////////////////////////////////////////////////////////////// // Administration (SYSOP Validation) ///////////////////////////////////////////////////////////////////////////// #define REJECT_REASONS (6) #define REASON_LEN (60) static const char *reasonstr[REJECT_REASONS] = { "請輸入真實姓名", "請詳填(畢業)學校『系』『級』或服務單位(含所屬縣市及職稱)", "請填寫完整住址 (含縣市/鄉鎮市區, 台北市請記得加行政區域)", "請詳填連絡電話 (含區碼, 中間不加 '-', '(', ')' 等符號)", "請精確並完整填寫註冊申請表", "請用中文填寫申請單", }; #define REASON_FIRSTABBREV '0' #define REASON_IN_ABBREV(x) \ ((x) >= REASON_FIRSTABBREV && (x) - REASON_FIRSTABBREV < REJECT_REASONS) #define REASON_EXPANDABBREV(x) reasonstr[(x) - REASON_FIRSTABBREV] void regform_log2board(const RegformEntry *pre, char accepted, const char *reason, int priority) { #ifdef BN_ID_RECORD char title[STRLEN]; char *title2 = NULL; char msg[STRLEN * REJECT_REASONS]; snprintf(title, sizeof(title), "[審核] %s: %s (%s: %s)", accepted ? "○通過":"╳退回", pre->u.userid, priority ? "指定審核" : "審核者", cuser.userid); // reduce mail header title title2 = strchr(title, ' '); if (title2) title2++; // construct msg strlcpy(msg, title2 ? title2 : title, sizeof(msg)); strlcat(msg, "\n", sizeof(msg)); if (!accepted) { regform_concat_reasons(reason, msg, sizeof(msg)); } strlcat(msg, "\n", sizeof(msg)); concat_regform_entry_localized(pre, msg, sizeof(msg)); post_msg(BN_ID_RECORD, title, msg, "[註冊系統]"); #endif // BN_ID_RECORD } void regform_accept(const char *userid, const char *justify) { char buf[PATHLEN]; int unum = 0; userec_t muser; unum = getuser(userid, &muser); if (unum == 0) return; // invalid user muser.userlevel |= (PERM_LOGINOK | PERM_POST); strlcpy(muser.justify, justify, sizeof(muser.justify)); // manual accept sets email to 'x' strlcpy(muser.email, "x", sizeof(muser.email)); // handle files sethomefile(buf, muser.userid, FN_REJECT_NOTIFY); unlink(buf); // update password file passwd_update(unum, &muser); // alert online users? if (search_ulist(unum)) { sendalert(muser.userid, ALERT_PWD_PERM|ALERT_PWD_JUSTIFY); // force to reload perm kick_all(muser.userid); } // According to suggestions by PTT BBS account sysops, // it is better to use anonymous here. #if FOREIGN_REG_DAY > 0 if(muser.uflag2 & FOREIGN) mail_log2id(muser.userid, "[System] Registration Complete ", "etc/foreign_welcome", "[SYSTEM]", 1, 0); else #endif // last: send notification mail mail_log2id(muser.userid, "[系統通知] 註冊成功\ ", "etc/registered", "[系統通知]", 1, 0); } void regform_reject(const char *userid, const char *reason, const RegformEntry *pre) { char buf[PATHLEN]; FILE *fp = NULL; int unum = 0; userec_t muser; unum = getuser(userid, &muser); if (unum == 0) return; // invalid user muser.userlevel &= ~(PERM_LOGINOK | PERM_POST); // handle files // update password file passwd_update(unum, &muser); // alert online users? if (search_ulist(unum)) { sendalert(muser.userid, ALERT_PWD_PERM); // force to reload perm kick_all(muser.userid); } // last: send notification mkuserdir(muser.userid); sethomefile(buf, muser.userid, FN_REJECT_NOTIFY); fp = fopen(buf, "wt"); assert(fp); syncnow(); // log reference for mail-reply. fprintf(fp, "#%010d\n\n", usernum); if(pre) print_regform_entry_localized(pre, fp); fprintf(fp, "%s 註冊失敗。\n", Cdate(&now)); // prompt user for how to contact if they have problem // (deprecated because we allow direct reply now) // fprintf(fp, ANSI_COLOR(1;31) "如有任何問題或需要與站務人員聯絡請至" // BN_ID_PROBLEM "看板。" ANSI_RESET "\n"); // multiple abbrev loop regform_print_reasons(reason, fp); fprintf(fp, "--\n"); fclose(fp); // if current site has extra notes if (dashf(FN_REJECT_NOTES)) AppendTail(FN_REJECT_NOTES, buf, 0); // According to suggestions by PTT BBS account sysops, // it is better to use anonymous here. // // XXX how to handle the notification file better? // mail_log2id: do not use move. // mail_muser(muser, "[註冊失敗]", buf); // use regform2! no need to set 'newmail'. mail_log2id(muser.userid, "[註冊失敗記錄]", buf, "[註冊系統]", 0, 0); } // New Regform UI static void prompt_regform_ui() { vs_footer(" 審核 ", " (y)接受(n)拒絕(d)丟掉 (s)跳過(u)復原 (空白/PgDn)儲存+下頁 (q/END)結束"); } static void regform_concat_reasons(const char *reason, char *result, int maxlen) { int len = strlen(result); // multiple abbrev loop if (REASON_IN_ABBREV(reason[0])) { int i = 0; for (i = 0; reason[i] && REASON_IN_ABBREV(reason[i]); i++) { len += snprintf(result + len, maxlen - len, "[退回原因] %s\n", REASON_EXPANDABBREV(reason[i])); } } else { len += snprintf(result + len, maxlen - len, "[退回原因] %s\n", reason); } } static void regform_print_reasons(const char *reason, FILE *fp) { char msg[STRLEN * REJECT_REASONS]; msg[0] = '\0'; regform_concat_reasons(reason, msg, sizeof(msg)); fputs(msg, fp); } static void resolve_reason(char *s, int y, int force) { // should start with REASON_FIRSTABBREV const char *reason_prompt = " (0)真實姓名 (1)詳填系級 (2)完整住址" " (3)詳填電話 (4)確實填寫 (5)中文填寫"; s[0] = 0; move(y, 0); outs(reason_prompt); outs("\n"); do { getdata(y+1, 0, "退回原因: ", s, REASON_LEN, DOECHO); // convert abbrev reasons (format: single digit, or multiple digites) if (REASON_IN_ABBREV(s[0])) { if (s[1] == 0) // simple replace ment { strlcpy(s, REASON_EXPANDABBREV(s[0]), REASON_LEN); } else { // strip until all digites char *p = s; while (*p) { if (!REASON_IN_ABBREV(*p)) *p = ' '; p++; } strip_blank(s, s); strlcat(s, " [多重原因]", REASON_LEN); } } if (!force && !*s) return; if (strlen(s) < 4) { if (vmsg("原因太短。 要取消退回嗎？ (y/N): ") == 'y') { *s = 0; return; } } } while (strlen(s) < 4); } //////////////////////////////////////////////////////////////////////////// // Regform2 API //////////////////////////////////////////////////////////////////////////// // registration queue int regq_append(const char *userid) { if (file_append_record(FN_REQLIST, userid) < 0) return 0; return 1; } int regq_find(const char *userid) { return file_find_record(FN_REQLIST, userid); } int regq_delete(const char *userid) { return file_delete_record(FN_REQLIST, userid, 0); } // user home regform operation int regfrm_exist(const char *userid) { char fn[PATHLEN]; sethomefile(fn, userid, FN_REGFORM); return dashf(fn) ? 1 : 0; } int regfrm_delete(const char *userid) { char fn[PATHLEN]; sethomefile(fn, userid, FN_REGFORM); #ifdef DBG_DRYRUN // dry run! vmsgf("regfrm_delete (%s)", userid); return 1; #endif // directly delete. unlink(fn); // remove from queue regq_delete(userid); return 1; } int regfrm_load(const char *userid, RegformEntry *pre) { // FILE *fp = NULL; char fn[PATHLEN]; int unum = 0; memset(pre, 0, sizeof(RegformEntry)); // first check if user exists. unum = getuser(userid, &(pre->u)); // valid unum starts at 1. if (unum < 1) return 0; // check if regform exists. sethomefile(fn, userid, FN_REGFORM); if (!dashf(fn)) return 0; #ifndef DBG_DRYRUN // check if user is already registered if (pre->u.userlevel & PERM_LOGINOK) { regfrm_delete(userid); return 0; } #endif // load regform // (deprecated in current version, we use real user data now) // fill RegformEntry data pre->online = search_ulist(unum) ? 1 : 0; return 1; } int regfrm_save(const char *userid, const RegformEntry *pre) { FILE *fp = NULL; char fn[PATHLEN]; int ret = 0; sethomefile(fn, userid, FN_REGFORM); fp = fopen(fn, "wt"); if (!fp) return 0; ret = print_regform_entry(pre, fp, 1); fclose(fp); return ret; } int regfrm_trylock(const char *userid) { int fd = 0; char fn[PATHLEN]; sethomefile(fn, userid, FN_REGFORM); if (!dashf(fn)) return 0; fd = open(fn, O_RDONLY); if (fd < 0) return 0; if (flock(fd, LOCK_EX|LOCK_NB) == 0) return fd; close(fd); return 0; } int regfrm_unlock(int lockfd) { int fd = lockfd; if (lockfd <= 0) return 0; lockfd = flock(fd, LOCK_UN) == 0 ? 1 : 0; close(fd); return lockfd; } // regform processors int regfrm_accept(RegformEntry *pre, int priority) { char justify[REGLEN+1], buf[STRLEN*2]; char fn[PATHLEN], fnlog[PATHLEN]; #ifdef DBG_DRYRUN // dry run! vmsg("regfrm_accept"); return 1; #endif sethomefile(fn, pre->u.userid, FN_REGFORM); // build justify string snprintf(justify, sizeof(justify), "[%s] %s", cuser.userid, Cdate(&now)); // call handler regform_accept(pre->u.userid, justify); // log to user home sethomefile(fnlog, pre->u.userid, FN_REGFORM_LOG); append_regform(pre, fnlog, ""); // log to global history snprintf(buf, sizeof(buf), "Approved: %s -> %s\n", cuser.userid, pre->u.userid); append_regform(pre, FN_REGISTER_LOG, buf); // log to board regform_log2board(pre, 1, NULL, priority); // remove from queue unlink(fn); regq_delete(pre->u.userid); return 1; } int regfrm_reject(RegformEntry *pre, const char *reason, int priority) { char buf[STRLEN*2]; char fn[PATHLEN]; #ifdef DBG_DRYRUN // dry run! vmsg("regfrm_reject"); return 1; #endif sethomefile(fn, pre->u.userid, FN_REGFORM); // call handler regform_reject(pre->u.userid, reason, pre); // log to global history snprintf(buf, sizeof(buf), "Rejected: %s -> %s [%s]\n", cuser.userid, pre->u.userid, reason); append_regform(pre, FN_REGISTER_LOG, buf); // log to board regform_log2board(pre, 0, reason, priority); // remove from queue unlink(fn); regq_delete(pre->u.userid); return 1; } // working queue FILE * regq_init_pull() { FILE *fp = tmpfile(), *src =NULL; char buf[STRLEN]; if (!fp) return NULL; src = fopen(FN_REQLIST, "rt"); if (!src) { fclose(fp); return NULL; } while (fgets(buf, sizeof(buf), src)) fputs(buf, fp); fclose(src); rewind(fp); return fp; } int regq_pull(FILE *fp, char *uid) { char buf[STRLEN]; size_t idlen = 0; uid[0] = 0; if (fgets(buf, sizeof(buf), fp) == NULL) return 0; idlen = strcspn(buf, str_space); if (idlen < 1) return 0; if (idlen > IDLEN) idlen = IDLEN; strlcpy(uid, buf, idlen+1); return 1; } int regq_end_pull(FILE *fp) { // no need to unlink because fp is a tmpfile. if (!fp) return 0; fclose(fp); return 1; } // UI part int ui_display_regform_single( const RegformEntry *pre, int tid, char *reason) { int c; const userec_t *xuser = &(pre->u); while (1) { move(1, 0); user_display(xuser, 1); move(14, 0); prints(ANSI_COLOR(1;32) "--------------- 這是第 %2d 份註冊單 -----------------------" ANSI_RESET "\n", tid); prints(" %-12s: %s %s\n", "帳號", pre->u.userid, (xuser->userlevel & PERM_NOREGCODE) ? ANSI_COLOR(1;31) " [T:禁止使用認證碼註冊]" ANSI_RESET: ""); prints("0.%-12s: %s%s\n", "真實姓名", pre->u.realname, xuser->uflag2 & FOREIGN ? " (外籍)" : ""); prints("1.%-12s: %s\n", "服務單位", pre->u.career); prints("2.%-12s: %s\n", "目前住址", pre->u.address); prints("3.%-12s: %s\n", "連絡電話", pre->u.phone); move(b_lines, 0); outs("是否接受此資料(Y/N/Q/Del/Skip)？[S] "); // round to ASCII while ((c = igetch()) > 0xFF); c = tolower(c); if (c == 'y' || c == 'q' || c == 'd' || c == 's') return c; if (c == 'n') { int n = 0; move(3, 0); outs("\n" ANSI_COLOR(1;31) "請提出退回申請表原因，按 取消:\n" ANSI_RESET); for (n = 0; n < REJECT_REASONS; n++) prints("%d) %s\n", n, reasonstr[n]); outs("\n\n\n"); // preserved for prompt getdata(3+2+REJECT_REASONS+1, 0,"退回原因: ", reason, REASON_LEN, DOECHO); if (reason[0] == 0) continue; // interprete reason return 'n'; } else if (REASON_IN_ABBREV(c)) { // quick set sprintf(reason, "%c", c); return 'n'; } return 's'; } // shall never reach here return 's'; } void regform2_validate_single(const char *xuid) { int lfd = 0; int tid = 0; char uid[IDLEN+1]; char rsn[REASON_LEN]; FILE *fpregq = regq_init_pull(); RegformEntry re; if (xuid && !*xuid) xuid = NULL; if (!fpregq) return; while (regq_pull(fpregq, uid)) { int abort = 0; // if target assigned, loop until given target. if (xuid && strcasecmp(uid, xuid) != 0) continue; // try to load regform. if (!regfrm_load(uid, &re)) { regq_delete(uid); continue; } // try to lock lfd = regfrm_trylock(uid); if (lfd <= 0) continue; tid ++; // display regform and process switch(ui_display_regform_single(&re, tid, rsn)) { case 'y': // accept regfrm_accept(&re, xuid ? 1 : 0); break; case 'd': // delete regfrm_delete(uid); break; case 'q': // quit abort = 1; break; case 'n': // reject regfrm_reject(&re, rsn, xuid ? 1 : 0); break; case 's': // skip // do nothing. break; default: // shall never reach here assert(0); break; } // final processing regfrm_unlock(lfd); if (abort) break; } regq_end_pull(fpregq); // finishing clear(); move(5, 0); if (xuid && tid == 0) prints("未發現 %s 的註冊單。", xuid); else prints("您檢視了 %d 份註冊單。", tid); pressanykey(); } #define FORMS_IN_PAGE (10) int regform2_validate_page(int dryrun) { int yMsg = FORMS_IN_PAGE*2+1; RegformEntry forms [FORMS_IN_PAGE]; char ans [FORMS_IN_PAGE]; int lfds [FORMS_IN_PAGE]; char rejects[FORMS_IN_PAGE][REASON_LEN]; // reject reason length char rsn [REASON_LEN]; int cforms = 0, // current loaded forms ci = 0, // cursor index ch = 0, // input key i; int tid = 0; char uid[IDLEN+1]; FILE *fpregq = regq_init_pull(); if (!fpregq) return 0; while (ch != 'q') { // initialize and prepare memset(ans, 0, sizeof(ans)); memset(rejects, 0, sizeof(rejects)); memset(forms, 0, sizeof(forms)); memset(lfds, 0, sizeof(lfds)); cforms = 0; clear(); // load forms while (cforms < FORMS_IN_PAGE) { if (!regq_pull(fpregq, uid)) break; i = cforms; // align index // check if user exists. if (!regfrm_load(uid, &forms[i])) { regq_delete(uid); continue; } // try to lock lfds[i] = regfrm_trylock(uid); if (lfds[i] <= 0) continue; // assign default answers if (forms[i].u.userlevel & PERM_LOGINOK) ans[i] = 'd'; #ifdef REGFORM_DISABLE_ONLINE_USER else if (forms[i].online) ans[i] = 's'; #endif // REGFORM_DISABLE_ONLINE_USER // display regform move(i*2, 0); prints(" %2d%s %s%-12s " ANSI_RESET, i+1, ( (forms[i].u.userlevel & PERM_LOGINOK) ? ANSI_COLOR(1;33) "Y" : #ifdef REGFORM_DISABLE_ONLINE_USER forms[i].online ? "s" : #endif "."), forms[i].online ? ANSI_COLOR(1;35) : ANSI_COLOR(1), forms[i].u.userid); prints( ANSI_COLOR(1;31) "%19s " ANSI_COLOR(1;32) "%-40s" ANSI_RESET"\n", forms[i].u.realname, forms[i].u.career); move(i*2+1, 0); prints(" %s %-50s%20s\n", (forms[i].u.userlevel & PERM_NOREGCODE) ? ANSI_COLOR(1;31) "T" ANSI_RESET : " ", forms[i].u.address, forms[i].u.phone); cforms++, tid ++; } // if no more forms then leave. if (cforms < 1) break; // adjust cursor if required if (ci >= cforms) ci = cforms-1; // display page info vbarf(ANSI_REVERSE "\t%s 已顯示 %d 份註冊單 ", // "(%2d%%) ", dryrun? "(測試模式)" : "", tid); // handle user input prompt_regform_ui(); ch = 0; while (ch != 'q' && ch != ' ') { ch = cursor_key(ci*2, 0); switch (ch) { // nav keys case KEY_UP: case 'k': if (ci > 0) ci--; break; case KEY_DOWN: case 'j': ch = 'j'; // go next break; // quick nav (assuming to FORMS_IN_PAGE=10) case '1': case '2': case '3': case '4': case '5': case '6': case '7': case '8': case '9': ci = ch - '1'; if (ci >= cforms) ci = cforms-1; break; case '0': ci = 10-1; if (ci >= cforms) ci = cforms-1; break; case KEY_HOME: ci = 0; break; /* case KEY_END: ci = cforms-1; break; */ // abort case KEY_END: case 'q': ch = 'q'; if (vans("確定要離開了嗎？ (本頁變更將不會儲存) [y/N]: ") != 'y') { prompt_regform_ui(); ch = 0; continue; } break; // prepare to go next page case KEY_PGDN: case ' ': ch = ' '; { int blanks = 0; // solving blank (undecided entries) for (i = 0, blanks = 0; i < cforms; i++) if (ans[i] == 0) blanks ++; if (!blanks) break; // have more blanks ch = vansf("尚未指定的 %d 個項目要: (S跳過/y通過/n拒絕/e繼續編輯): ", blanks); } if (ch == 'e') { prompt_regform_ui(); ch = 0; continue; } if (ch == 'y') { // do nothing. } else if (ch == 'n') { // query reject reason resolve_reason(rsn, yMsg, 1); if (*rsn == 0) ch = 's'; } else ch = 's'; // filling answers for (i = 0; i < cforms; i++) { if (ans[i] != 0) continue; ans[i] = ch; if (ch != 'n') continue; strlcpy(rejects[i], rsn, REASON_LEN); } ch = ' '; // go to page mode! break; // function keys case 'y': // accept #ifdef REGFORM_DISABLE_ONLINE_USER if (forms[ci].online) { vmsg("暫不開放審核在線上使用者。"); break; } #endif case 's': // skip case 'd': // delete case KEY_DEL: //delete if (ch == KEY_DEL) ch = 'd'; grayout(ci*2, ci*2+1, GRAYOUT_DARK); move_ansi(ci*2, 4); outc(ch); ans[ci] = ch; ch = 'j'; // go next break; case 'u': // undo #ifdef REGFORM_DISABLE_ONLINE_USER if (forms[ci].online) { vmsg("暫不開放審核在線上使用者。"); break; } #endif grayout(ci*2, ci*2+1, GRAYOUT_NORM); move_ansi(ci*2, 4); outc('.'); ans[ci] = 0; ch = 'j'; // go next break; case 'n': // reject #ifdef REGFORM_DISABLE_ONLINE_USER if (forms[ci].online) { vmsg("暫不開放審核在線上使用者。"); break; } #endif // query for reason resolve_reason(rejects[ci], yMsg, 0); move(yMsg, 0); clrtobot(); prompt_regform_ui(); if (!rejects[ci][0]) break; move(yMsg, 0); prints("退回 %s 註冊單原因:\n %s\n", forms[ci].u.userid, rejects[ci]); // do reject grayout(ci*2, ci*2+1, GRAYOUT_DARK); move_ansi(ci*2, 4); outc(ch); ans[ci] = ch; ch = 'j'; // go next break; } // switch(ch) // change cursor if (ch == 'j' && ++ci >= cforms) ci = cforms -1; } // while(ch != QUIT/SAVE) // if exit, we still need to skip all read forms if (ch == 'q') { for (i = 0; i < cforms; i++) ans[i] = 's'; } // page complete (save). assert(ch == ' ' || ch == 'q'); // save/commit if required. if (dryrun) { // prmopt for debug clear(); vs_hdr("測試模式"); outs("您正在執行測試模式，所以剛審的註冊單並不會生效。\n" "下面列出的是剛才您審完的結果:\n\n"); for (i = 0; i < cforms; i++) { char justify[REGLEN+1]; if (ans[i] == 'y') snprintf(justify, sizeof(justify), // build justify string "%s %s", cuser.userid, Cdate(&now)); prints("%2d. %-12s - %c %s\n", i+1, forms[i].u.userid, ans[i], ans[i] == 'n' ? rejects[i] : ans[i] == 'y' ? justify : ""); } if (ch != 'q') pressanykey(); } else { // real functionality for (i = 0; i < cforms; i++) { switch(ans[i]) { case 'y': // accept regfrm_accept(&forms[i], 0); break; case 'd': // delete regfrm_delete(uid); break; case 'n': // reject regfrm_reject(&forms[i], rejects[i], 0); break; case 's': // skip // do nothing. break; default: assert(0); break; } } } // !dryrun // unlock all forms for (i = 0; i < cforms; i++) regfrm_unlock(lfds[i]); } // while (ch != 'q') regq_end_pull(fpregq); // finishing clear(); move(5, 0); prints("您檢視了 %d 份註冊單。", tid); pressanykey(); return 0; } ///////////////////////////////////////////////////////////////////////////// // Regform UI // 處理 Register Form ///////////////////////////////////////////////////////////////////////////// /* Auto-Regform-Scan * FIXME 真是一團垃圾 * * fdata 用了太多 magic number * return value 應該是指 reason (return index + 1) * ans[0] 指的是帳管選擇的「錯誤的欄位」 (Register 選單裡看到的那些) */ #if 0 static int auto_scan(char fdata[][STRLEN], char ans[]) { int good = 0; int count = 0; int i; char temp[10]; if (!strncmp(fdata[1], "小", 2) || DBCS_strcasestr(fdata[1], "丫") || DBCS_strcasestr(fdata[1], "誰") || DBCS_strcasestr(fdata[1], "不")) { ans[0] = '0'; return 1; } strlcpy(temp, fdata[1], 3); /* 疊字 */ if (!strncmp(temp, &(fdata[1][2]), 2)) { ans[0] = '0'; return 1; } if (strlen(fdata[1]) >= 6) { if (DBCS_strcasestr(fdata[1], "陳水扁")) { ans[0] = '0'; return 1; } if (DBCS_strcasestr("趙錢孫李周吳鄭王", temp)) good++; else if (DBCS_strcasestr("杜顏黃林陳官余辛劉", temp)) good++; else if (DBCS_strcasestr("蘇方吳呂李邵張廖應蘇", temp)) good++; else if (DBCS_strcasestr("徐謝石盧施戴翁唐", temp)) good++; } if (!good) return 0; if (!strcmp(fdata[2], fdata[3]) || !strcmp(fdata[2], fdata[4]) || !strcmp(fdata[3], fdata[4])) { ans[0] = '4'; return 5; } if (DBCS_strcasestr(fdata[2], "大")) { if (DBCS_strcasestr(fdata[2], "台") || DBCS_strcasestr(fdata[2], "淡") || DBCS_strcasestr(fdata[2], "交") || DBCS_strcasestr(fdata[2], "政") || DBCS_strcasestr(fdata[2], "清") || DBCS_strcasestr(fdata[2], "警") || DBCS_strcasestr(fdata[2], "師") || DBCS_strcasestr(fdata[2], "銘傳") || DBCS_strcasestr(fdata[2], "中央") || DBCS_strcasestr(fdata[2], "成") || DBCS_strcasestr(fdata[2], "輔") || DBCS_strcasestr(fdata[2], "東吳")) good++; } else if (DBCS_strcasestr(fdata[2], "女中")) good++; if (DBCS_strcasestr(fdata[3], "地球") || DBCS_strcasestr(fdata[3], "宇宙") || DBCS_strcasestr(fdata[3], "信箱")) { ans[0] = '2'; return 3; } if (DBCS_strcasestr(fdata[3], "市") || DBCS_strcasestr(fdata[3], "縣")) { if (DBCS_strcasestr(fdata[3], "路") || DBCS_strcasestr(fdata[3], "街")) { if (DBCS_strcasestr(fdata[3], "號")) good++; } } for (i = 0; fdata[4][i]; i++) { if (isdigit((int)fdata[4][i])) count++; } if (count <= 4) { ans[0] = '3'; return 4; } else if (count >= 7) good++; if (good >= 3) { ans[0] = 'y'; return -1; } else return 0; } #endif int m_register(void) { FILE *fn; int x, y, wid, len; char ans[4]; char genbuf[200]; if (dashs(FN_REQLIST) <= 0) { outs("目前並無新註冊資料"); return XEASY; } fn = fopen(FN_REQLIST, "r"); assert(fn); vs_hdr("審核使用者註冊資料"); y = 2; x = wid = 0; while (fgets(genbuf, STRLEN, fn) && x < 65) { move(y++, x); outs(genbuf); len = strlen(genbuf); if (len > wid) wid = len; if (y >= t_lines - 3) { y = 2; x += wid + 2; } } fclose(fn); getdata(b_lines - 1, 0, "開始審核嗎 (Y:單筆模式/N:不審/E:整頁模式/U:指定ID)？[N] ", ans, sizeof(ans), LCECHO); if (ans[0] == 'y') regform2_validate_single(NULL); else if (ans[0] == 'e') regform2_validate_page(0); else if (ans[0] == 'u') { vs_hdr("指定審核"); usercomplete(msg_uid, genbuf); if (genbuf[0]) regform2_validate_single(genbuf); } return 0; } /* vim:sw=4 */