path: root/tools/verify-evolution-install.sh

#!/bin/sh
#
# Verifies that Evolution and all its supporting components
# are installed correctly. A tool to weed out common
# build problems.
#
# (C)2000 Helix Code, Inc.
# Author: Peter Williams <peterw@helixcode.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public License
# as published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE.  See the
# GNU Library General Public License for more details.
#
# You should have received a copy of the GNU Library General Public
# License along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#

problem() {
    echo "I detected the following problem: $problem"
    if test x"$rpmsystem" = xyes ; then
    echo "Suggested solution via RPM: $rpmsolution"
    fi
    if test x"$debsystem" = xyes ; then
    echo "Suggested solution via DEB: $debsolution"
    fi
    echo "Suggested solution via sources: $srcsolution"
    if test x"$comment" != x ; then
    echo ""
    echo "$comment"
    fi
    exit 1
}

check_config() {
    #bigname=$1
    #cfgname=$2
    #pkgname=$3
    eval $1=\${$1-\`which $2\`}

    eval val=\$$1
    if test ! -x $val ; then
    problem="Cannot find $2 or it ($val) is not executable"
    rpmsolution="Install or reinstall the \'$3-devel\' package"
    debsolution="Install or reinstall the $3 development libraries." #FIXME
    srcsolution="Get the latest release of $3 and install it."
    comment="If you know that $3 is installed, try setting the
environment variable $1 to its location"
    problem
    fi
}

check_prefix() {
    #othercfg=$1
    #othername=$2
    #strict=$3

    eval otherpfx=\`\$$1 --prefix\`
    if test x"$3" = xstrict ; then
    if test x"$otherpfx" != x"$gl_prefix" ; then
        problem="gnome-libs and $2 do not share the same prefix"
        rpmsolution="This problem shouldn\'t happen with RPM installations. Verify your installation of Helix Gnome."
        debsolution="This problem shouldn\'t happen with DEB installations. Verify your installation of Helix Gnome."
        srcsolution="Re-run \'configure\' in $2\'s source directory with the flag \'--prefix=$gl_prefix\'."
        problem
    fi
    else
    IFSbak="$IFS"
    ok="$GNOME_PATH:$gl_prefix"
    IFS=":"
    passed=no

    for e in $ok; do
        if test x"$e" != x ; then
        if test $otherpfx = $e ; then
            passed=yes;
        fi
        fi
    done

    IFS="$IFSbak"

    if test x"$passed" = xno ; then
        problem="$2 is not in GNOME_PATH or the same prefix as gnome-libs"
        rpmsolution="This problem shouldn\'t happen with RPM installations. Verify your installation of Helix Gnome."
        debsolution="This problem shouldn\'t happen with DEB installations. Verify your installation of Helix Gnome."
        srcsolution="Re-run \'configure\' in $2\'s source directory with the flag \'--prefix=$gl_prefix\'."
        comment="Try exporting an environment variable \'GNOME_PATH\' with the prefix of $2."
        problem
    fi
    fi
}

check_sysconf() {
    #othercfg=$1
    #othername=$2

    eval othersysc=\`\$$1 --sysconfdir\`
    if test x"$othersysc" != x"$gl_sysconf" ; then
    problem="gnome-libs and $2 do not share the same sysconfdir"
    rpmsolution="This problem shouldn\'t happen with RPM installations. Verify your installation of Helix Gnome."
    debsolution="This problem shouldn\'t happen with DEB installations. Verify your installation of Helix Gnome."
    srcsolution="Re-run \'configure\' in $2\'s source directory with the flag \'--sysconfdir=$gl_sysconf\'."
    problem
    fi
}

check_oafinfo() {
    #basename=$1
    #othername=$2

    base=$1.oafinfo
    search="${gl_datadir}/oaf:$OAF_INFO_PATH"
    IFSback="$IFS"
    IFS=":"
    ok=no

    for ping in $search ; do
    if test x"$ping" != x ; then
        if test -f $ping/$base ; then
        file=$ping/$base
        ok=yes
        fi
    fi
    done

    IFS="$IFSback"

    if test x$ok = xno ; then
    problem="$1.oafinfo isn\'t installed into Gnome\'s prefix or in OAF_INFO_PATH"
    rpmsolution="This problem shouldn\'t happen with RPM installations. Verify your installation of Helix Gnome."
    debsolution="This problem shouldn\'t happen with DEB installations. Verify your installation of Helix Gnome."
    srcsolution="Re-run \'configure\' in $2\'s source directory with the flag \'--datadir=$gl_datadir\'."
    comment="Another likely cause of this problem would be a failed installation of $2.
You should check to see that the install succeeded. You may also add the
location $1.oafinfo to the environment variable OAF_INFO_PATH"
    problem
    fi

    iids=`cat $file |grep iid= |sed -e 's,.*iid="\([^"]*\)".*,\1,'`
    IFS="
"

    tempfile="temp-$$-verifier"
    for iid in $iids ; do
    echo "Attempting to activate IID \"$iid\"..."
    $OAF_CLIENT -qs "iid == '$iid'" >$tempfile
    result=`cat $tempfile |grep exception`
    if test x"$result" != x ; then
        problem="The component $2 (in $file) couldn't be activated by OAF"
        rpmsolution="Verify that $file is valid and that oaf and $2 are correctly installed."
        debsolution="Verify that $file is valid and that oaf and $2 are correctly installed."
        srcsolution="Verify that $file is valid and that oaf and $2 are correctly installed."
        comment="$OAF_CLIENT reported this:
`cat $tempfile`"
        rm -f $tempfile
        problem
        fi
    done
    rm -f $tempfile

    IFS="$IFSback"
}

check_bin() {
    #name=$1
    #othername=$2

    if test ! -f ${gl_bindir}/$1 ; then
    problem="The binary $1 isn\'t installed into Gnome\'s prefix"
    rpmsolution="This problem shouldn\'t happen with RPM installations. Verify your installation of Helix Gnome."
    debsolution="This problem shouldn\'t happen with DEB installations. Verify your installation of Helix Gnome."
    srcsolution="Re-run \'configure\' in $2\'s source directory with the flag \'--bindir=$gl_bindir\'."
    comment="Another likely cause of this problem would be a failed installation of $2.
You should check to see that the install succeeded."
    problem
    fi
}

check_no_gnorba() {
    #libs=$1
    #othername=$2

    ping=`echo $1 |grep 'gnorba'`

    if test x"$ping" != x ; then
    problem="$2 was built using Gnorba, not OAF"
    rpmsolution="This problem shouldn\'t happen with RPM installations. Verify your installation of Helix Gnome."
    debsolution="This problem shouldn\'t happen with DEB installations. Verify your installation of Helix Gnome."
    srcsolution="Update $2 and re-run \'configure\' in its source directory with the flag \'--enable-oaf=yes\'."
    problem
    fi
}

########################################

versionparse3() {
    #inst_version=$1
    #reqd_version=$2
    #package=$3

    inst_version=`versiongrab3 "$1"`
    inst_major=`echo $inst_version |sed -e 's,\([0-9][0-9]*\)\..*\..*,\1,'`
    inst_minor=`echo $inst_version |sed -e 's,.*\.\([0-9][0-9]*\)\..*,\1,'`
    inst_micro=`echo $inst_version |sed -e 's,.*\..*\.\([0-9][0-9]*\),\1,'`

    reqd_version=`versiongrab3 "$2"`
    reqd_major=`echo $reqd_version |sed -e 's,\([0-9][0-9]*\)\..*\..*,\1,'`
    reqd_minor=`echo $reqd_version |sed -e 's,.*\.\([0-9][0-9]*\)\..*,\1,'`
    reqd_micro=`echo $reqd_version |sed -e 's,.*\..*\.\([0-9][0-9]*\),\1,'`

    ok=yes
    if test $inst_major -lt $reqd_major ; then
    ok=no
    elif test $inst_major -gt $reqd_major ; then
    ok=yes
    elif test $inst_minor -lt $reqd_minor; then
    ok=no
    elif test $inst_minor -gt $reqd_minor; then
    ok=yes
    elif test $inst_micro -lt $reqd_micro; then
    ok=no
    fi

    if test x$ok = xno ; then
    problem="Package $3 is not new enough ($1 detected, $2 required)"
    rpmsolution="Obtain a newer version and install it"
    depsolution="Obtain a newer version and install it"
    srcsolution="Obtain a newer version and install it"
    comment="If you think you have a newer installation, make sure that the
package is not installed twice."
    problem
    fi
}

versiongrab3() {
    echo $1 |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*,\1,'
}

check_module3() {
    #$1=gnome-libs name
    #$2=package
    #$3=version
    $GNOME_CONFIG --modversion $1 1>/dev/null 2>/dev/null </dev/null
    if test x$? != x0 ; then
    problem="Package $2 doesn\'t seem to be installed."
    rpmsolution="Get and install the packages \'$2\' and \'$2-devel\'"
    debsolution="Get and install the package $2 and its development libraries" #FIXME
    srcsolution="Download the source and install the package $2"
    comment="If you think the package is installed, check that its prefix is $gl_prefix --
${1}Conf.sh should be installed into `$GNOME_CONFIG --libdir`"
    problem
    fi

    instversion=`$GNOME_CONFIG --modversion $1`

    #eew eew hacky
    # gnome-vfs used to be versioned gnome-vfs-0.1,
    # and gnome-vfs-0.2, but then they moved to three figs--
    # now it's gnome-vfs-0.2.0

    if test $2 = gnome-vfs ; then
    case "$instversion" in
    gnome-vfs-0.1)
        problem="Package gnome-vfs is not new enough (0.1 detected, $3 required)"
        rpmsolution="Obtain a newer version and install it"
        depsolution="Obtain a newer version and install it"
        srcsolution="Obtain a newer version and install it"
        comment="If you think you have a newer installation, make sure that the
package is not installed twice."
        problem
        ;;
    gnome-vfs-0.2)
        instversion="gnome-vfs-0.2.0"
        ;;
    *)
        #nothing, version is ok
        ;;
    esac
    fi

    versionparse3 "$instversion" "$3" "$2"
}

########################################

versionparse2() {
    #inst_version=$1
    #reqd_version=$2
    #package=$3

    inst_version=`versiongrab2 "$1"`
    inst_major=`echo $inst_version |sed -e 's,\([0-9][0-9]*\)\..*,\1,'`
    inst_minor=`echo $inst_version |sed -e 's,.*\.\([0-9][0-9]*\),\1,'`

    reqd_version=`versiongrab2 "$2"`
    reqd_major=`echo $reqd_version |sed -e 's,\([0-9][0-9]*\)\..*,\1,'`
    reqd_minor=`echo $reqd_version |sed -e 's,.*\.\([0-9][0-9]*\),\1,'`

    ok=yes
    if test $inst_major -lt $reqd_major ; then
    ok=no
    elif test $inst_major -gt $reqd_major ; then
    ok=yes
    elif test $inst_minor -lt $reqd_minor; then
    ok=no
    fi

    if test x$ok = xno ; then
    problem="Package $3 is not new enough ($1 detected, $2 required)"
    rpmsolution="Obtain a newer version and install it"
    depsolution="Obtain a newer version and install it"
    srcsolution="Obtain a newer version and install it"
    comment="If you think you have a newer installation, make sure that the
package is not installed twice."
    problem
    fi
}

versiongrab2() {
    echo $1 |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\).*,\1,'
}

check_module2() {
    #$1=gnome-libs name
    #$2=package
    #$3=version
    $GNOME_CONFIG --modversion $1 1>/dev/null 2>/dev/null </dev/null
    if test x$? != x0 ; then
    problem="Package $2 doesn\'t seem to be installed."
    rpmsolution="Get and install the packages \'$2\' and \'$2-devel\'"
    debsolution="Get and install the package $2 and its development libraries" #FIXME
    srcsolution="Download the source and install the package $2"
    comment="If you think the package is installed, check that its prefix is $gl_prefix --
${1}Conf.sh should be installed into `$GNOME_CONFIG --libdir`"
    problem
    fi

    instversion=`$GNOME_CONFIG --modversion $1`
    versionparse2 "$instversion" "$3" "$2"
}

########################################

#prep
if test -d /var/lib/rpm ; then
    rpmsystem=yes
    RPM=${RPM_PROG-`which rpm`}

    $RPM --version 1>/dev/null 2>/dev/null </dev/null
    if test x$? != x0 ; then
    problem="The rpm executable ($RPM) does not seem to work."
    rpmsolution="none, if rpm doesn\'t work."
    debsolution="not applicable."
    srcsolution="download and install rpm manually."
    comment="If rpm really won\'t work then there is something wrong with your system."
    problem
    fi
else
    rpmsystem=no
fi

if test -d /var/lib/dpkg ; then
    debsystem=yes
    #FIXME: check if deb works
else
    debsystem=no
fi

if test x"$GNOME_PATH" != x ; then
    PATH="$GNOME_PATH:$PATH"
fi

#gnome-libs
check_config GNOME_CONFIG gnome-config gnome-libs

gl_version=`$GNOME_CONFIG --version` # |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*,\1,'`
gl_sysconf=`$GNOME_CONFIG --sysconfdir`
gl_prefix=`$GNOME_CONFIG --prefix`
gl_datadir=`$GNOME_CONFIG --datadir`
gl_bindir=`$GNOME_CONFIG --bindir`

versionparse3 "$gl_version" "1.0.59" "gnome-libs"

#libunicode
check_config UNICODE_CONFIG unicode-config libunicode
check_prefix UNICODE_CONFIG libunicode
versionparse2 "`$UNICODE_CONFIG --version`" "0.4" libunicode

#ORBit
check_config ORBIT_CONFIG orbit-config ORBit
check_prefix ORBIT_CONFIG ORBit

#oaf
check_config OAF_CONFIG oaf-config oaf
check_prefix OAF_CONFIG oaf
versionparse3 "`$OAF_CONFIG --version`" "0.4.0" "oaf"
check_bin oafd

OAF_CLIENT=${OAF_CLIENT-`which oaf-client`}
if test ! -x ${OAF_CLIENT-notexecutable} ; then
    problem="oaf-client couldn't be found"
    rpmsolution="Install the 'oaf-devel' package"
    debsolution="Install the oaf development libraries"
    srcsolution="Make sure that oaf is installed correctly"
    comment="If you think you have oaf-client installed, try exporting an
environment variable OAF_CLIENT pointing to it"
    problem
fi

check_oafinfo oafd oaf

#gconf
check_config GCONF_CONFIG gconf-config GConf
check_prefix GCONF_CONFIG GConf
versionparse2 "`$GCONF_CONFIG --version`" "0.5" GConf
if test x`which gconfd-1` != x ; then
    check_oafinfo gconfd-1 GConf
    check_bin gconfd-1
else
    check_oafinfo gconfd GConf
    check_bin gconfd
fi
check_no_gnorba "`$GCONF_CONFIG --libs`" GConf

#gnome vfs
check_module3 vfs gnome-vfs "0.2.0"
check_no_gnorba "`$GNOME_CONFIG --libs vfs`" gnome-vfs

#gnome print
check_module2 print gnome-print "0.20"
check_no_gnorba "`$GNOME_CONFIG --libs print`" gnome-print

#bonobo
check_module2 bonobo bonobo "0.15"
check_prefix "GNOME_CONFIG bonobo" bonobo strict
check_oafinfo audio-ulaw bonobo
check_bin bonobo-audio-ulaw bonobo
check_no_gnorba "`$GNOME_CONFIG --libs bonobo`" bonobo

#gtkhtml
check_module2 gtkhtml GtkHTML "0.5"
check_oafinfo html-editor-control GtkHTML
check_bin html-editor-control GtkHTML
check_no_gnorba "`$GNOME_CONFIG --libs gtkhtml`" GtkHTML

#evolution
check_oafinfo addressbook evolution
check_oafinfo calendar-control evolution
check_oafinfo evolution-mail evolution
check_oafinfo evolution-calendar evolution
check_oafinfo evolution-addressbook-select-names evolution
check_oafinfo wombat evolution
check_bin evolution-mail evolution
check_bin evolution-calendar evolution
check_bin evolution-addressbook evolution
check_bin wombat evolution
check_bin evolution evolution

#done
echo "Your Gnome system appears to be properly set up. Enjoy Evolution!"
exit 0