path: root/camel/ChangeLog

2000-04-20  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-utils.[ch]: Removed.

    * providers/mbox/camel-mbox-parser.[ch]: Removed.  Removed
    references to it.

2000-04-20  Dan Winship  <danw@helixcode.com>

    * camel-mime-utils.c (rfc2047_decode_word): use libunicode iconv
    functions rather than libc ones (since libc might not have them).
    (header_decode_date): add autoconfiscation on timezone code

    * camel.c (camel_init): call unicode_init ()

2000-04-20  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-summary.c (message_struct_new): Trim
    leading/trailing spaces off the raw headers.

    * MERGE NEW_PARSER branch into HEAD, fixed conflicts.
    
    * gmime-content-field.c (_print_parameter): Duh, removed again
    (@@#$@ cvs merge).

    * camel-mime-utils.c (header_content_type_is): Constify.
    (header_content_type_unref): Killed a couple warnings.

    * camel-folder.c (_init): Removed more log crap.

    * providers/Makefile.am (SUBDIRS): Removed nntp, pending fixes for
    summary changes.

    * providers/mbox/camel-mbox-folder.c (_get_message_by_number):
    Fixed for new summary interface.  Added a warning for using this
    broken api.
    (_get_message_by_uid): Fixed for message new with session
    vanishing.

2000-04-19  Dan Winship  <danw@helixcode.com>

    * camel-simple-data-wrapper-stream.c
    (camel_simple_data_wrapper_stream_get_type): This is a subtype of
    CamelSeekableStream, not CamelStream.

    * camel-seekable-substream.c: clean up a lot.
    (eos): When testing for end-of-stream, reset the parent position
    before testing if it is at end-of-stream, since either (a) it may
    have been seek'ed to eos by someone else, or (b) we may have been
    seek'ed away from eos and it hasn't been synced yet.

    * camel-medium.[ch] (camel_medium_add_header): const poison.
    (Belatedly goes with my change of 2000-02-23.)
    (camel_medium_init): Use g_strcase_{hash,equal} on the header
    array.
    
2000-04-18  Dan Winship  <danw@helixcode.com>

    * camel-mime-part.c (my_set_input_stream): 
    * camel-data-wrapper.c (set_input_stream, set_output_stream): do
    better reference counting of streams so they actually go away
    when they should.

    * camel-log.[ch], *: Nuke camel log stuff. Replace calls to
    CAMEL_LOG_WARNING with calls to g_warning.

    * camel-data-wrapper.[ch]:
    * camel-simple-data-wrapper.[ch]:
    * camel-medium.[ch]: Clean, polish, document. Most of the gtk-doc
    comments added to camel-data-wrapper.c note serious problems that
    need to be fixed.

2000-04-17  Dan Winship  <danw@helixcode.com>

    * camel-mime-message.[ch]: Remove the "session" field from
    CamelMimeMessage. Nothing uses it, about half of the existing
    calls to camel_mime_message_new_with_session pass NULL, and
    there's no obvious reason for it to be there.

    * providers/MH/camel-mh-folder.c:
    * providers/maildir/camel-maildir-folder.c:
    * providers/mbox/camel-mbox-folder.c:
    * providers/mbox/camel-mbox-utils.c:
    * providers/nntp/camel-nntp-folder.c:
    * providers/pop3/camel-pop3-folder.c: Use camel_mime_message_new
    instead of camel_mime_message_new_with_session.

    * camel-session.c (get_store_for_protocol_with_url): Set the
    exception if no provider is found.

    * camel-url.c: Add code to encode and decode %-escapes in URLs,
    and do some additional correctness-checking on URL syntax. From
    Tiago Antào with modifications by me.

2000-04-14  Chris Toshok  <toshok@helixcode.com>

    * providers/Makefile.am (SUBDIRS): add nntp

2000-04-14  Christopher James Lahey  <clahey@helixcode.com>

    * providers/mbox/camel-mbox-folder.c: Fix switch statement.

2000-04-14  Chris Toshok  <toshok@helixcode.com>

    * providers/nntp/camel-nntp-folder.c (_exists): always return TRUE
    for now.  we need to check the server response to make sure the
    group exists.
    (_get_message_by_uid): make sure to account for the \n we add to
    the string after every line.

    * providers/nntp/camel-nntp-utils.c (get_XOVER_headers): function
    to get the headers using the XOVER command.
    (get_HEAD_headers): function to get the headers using the HEAD
    command on each message. slooooooow.
    (camel_nntp_get_headers): make this function use either XOVER or HEAD
    versions depending on whether or not the server extension is present.

2000-04-14  Dan Winship  <danw@helixcode.com>

    * camel-formatter.[ch]: This didn't belong in Camel. Move to mail/

    * Makefile.am, camel-types.h: remove references to
    camel-formatter.

2000-04-12  Matt Loper  <matt@helixcode.com>

    * camel-folder-pt-proxy.c (_folder_open_cb): Print warning message
    for broken function.
    (_folder_close_cb): Same.

2000-04-12  Miguel de Icaza  <miguel@gnu.org>

    * Makefile.am (pthread_SRC): Use correct names for the pthread
    source variables.

2000-04-10  Dan Winship  <danw@helixcode.com>

    * providers/pop3/camel-pop3-store.c (pop3_connect): fix various
    bugs in APOP code (still untested) and some of the error cases.

    * camel-provider.h: Clarify what provider.protocol, provider.name,
    and provider.description should be.

    * providers/mbox/camel-mbox-provider.c: 
    * providers/pop3/camel-pop3-provider.c: 
    * providers/sendmail/camel-sendmail-provider.c: 
    * providers/smtp/camel-smtp-provider.c: update protocols, names,
    and descriptions

    * providers/mbox/camel-mbox-folder.c (_get_message_by_number):
    implement get_message_by_number for the mail fetch code.

2000-04-09  Jeffrey Stedfast  <fejj@stampede.org>

    * providers/smtp/camel-smtp-transport.c: reformatted to fit
    the standard indent format used by helix code

2000-04-09  Dan Winship  <danw@helixcode.com>

    * camel-movemail.c: New file with new function to dot-lock an mbox
    file and copy it to a safe private directory.

2000-04-08  Christopher James Lahey  <clahey@helixcode.com>

    * providers/smtp/.cvsignore: Added a .cvsignore file.

2000-04-08  Dan Winship  <danw@helixcode.com>

    * providers/sendmail/camel-sendmail-transport.c (_send_internal):
    actually record the pid returned by fork(). Noticed by clahey.

    * providers/smtp/camel-smtp-transport.c: #include <sys/param.h>
    for MAXHOSTNAMELEN. (This is a stopgap: some of the uses of
    MAXHOSTNAMELEN are wrong anyway...)

2000-04-07  Jeffrey Stedfast  <fejj@stampede.org>

    * providers/smtp/camel-smtp-transport.c: fixes to numerous bugs;
    should now build fine.
    * providers/Makefile.am: Readded smtp now that smtp builds without
    error.

2000-04-20  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-summary.c
    (camel_mbox_summary_next_uid): Public function to get the next
    uid, makes sure its saved to disk too.

    * camel-mime-part.c (my_finalize): Fix disposition crap with a
    real disposition.
    (my_set_disposition): Likewise.
    (my_get_disposition): And here.
    (my_write_to_stream): And here, needs more cleanup.

    * providers/mbox/camel-mbox-folder.c (_append_message): Assign a
    new uid at this point.

    * gmime-content-field.c (gmime_content_field_write_to_stream):
    Make something up if we have an invalid/missing content type
    (i.e. text/plain).

2000-04-19  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-folder.c (_delete): Fixed completely
    broken switch() syntax, only compiled because errno is a macro on
    some systems.
    (_list_subfolders): Likewise.

2000-04-18  NotZed  <NotZed@HelixCode.com>

    * camel-mime-parser.c (folder_scan_init): init stream to null.

    * providers/mbox/camel-mbox-summary.c
    (CAMEL_MBOX_SUMMARY_VERSION): Moved to .c file, incremented.
    (index_folder): Changed to have index passed via the summary.
    (decode_string): Do a sanity check on the string size, so we dont
    visit g_malloc()'s friendly abort().

    * camel-folder-pt-proxy.c (camel_folder_pt_proxy_class_init):
    Removed reference to set_name.
    (_set_name): Removed.

    * providers/mbox/camel-mbox-utils.c
    (parsed_information_to_mbox_summary): Removed.  Most of this file
    is about to be binned.

    * providers/mbox/camel-mbox-search.c (func_header_contains): Fixes
    for changes to summary interface.
    (struct _searchcontext): Remove pointer to message info, get it
    straight from the mboxsummary.
    (camel_mbox_folder_search_by_expression): New summary interface.
    (camel_mbox_folder_search_by_expression): Uh, the summary is not
    an object anymore (well not yet).

    * providers/mbox/camel-mbox-folder.c
    (camel_mbox_folder_class_init): Removed set_name init.
    (_set_name): Removed.
    (_open): Call new summary interface.
    (_close): Use new summary interface.
    (_create): Removed a summary object leak.
    (_get_message_count): New summary interface.
    (_get_uid_list): Use new summary interface. FIXME: this is leaky.
    (_get_message_by_uid): Use the new summary interface, some
    cleanup.
    (_append_message): Totally changed, basically just appends the
    message directly, ignores the summary (for now), the summary will
    fix itself up if it needs to.
    (_check_get_or_maybe_generate_summary_file): Bye bye old code.
    (summary_get_message_info): Implement get_message_info again, for
    folder.

    * camel-folder.c (camel_folder_class_init): Removed set_name
    setup.
    (_set_name): Moved contents into _init.
    (_init): Perform the old functions of set_name here.

    * camel-folder.h: Removed the set_name internal interface.

2000-04-14  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-summary.[ch]: Completely replaced with
    new code.

    * Makefile.am (libcamel_la_SOURCES): Removed
    camel-folder-summary.[ch].

    * camel-folder.h (struct _CamelFolder): Removed summary.
    (struct _CamelFolder): Changed flags to be 1 bit bitfields.

    * camel-folder-summary.[ch]: Class removed entirely.

    * camel-folder.c (camel_folder_get_summary): Removed.
    (camel_folder_summary_get_message_info): Moved from
    camel-folder-summary.c
    (camel_folder_summary_get_subfolder_info): Moved from
    camel-folder-summary.c

    * camel-mime-parser.c (folder_scan_step): Store the start of
    headers and start of from in the scan state.
    (camel_mime_parser_tell_start_headers): Query the start of the
    headers.
    (camel_mime_parser_tell_start_from): Query the cached start of
    from marker.

2000-04-13  NotZed  <NotZed@HelixCode.com>

    * gmime-content-field.c (gmime_content_field_free): Removed this
    function.  If its too dangerous to use, it shouldn't be here.
    (gmime_content_field_ref): Also ref the embedded content-type.
    (gmime_content_field_unref): Ditto to unref it.

    * camel-mime-utils.h: Add a refcount for content-type header.

    * camel-mime-utils.c (header_content_type_unref): Implement unref
    for content-type.
    (header_content_type_ref): Implement ref for header content type.

2000-04-12  NotZed  <NotZed@HelixCode.com>

    * gmime-content-field.h: Changed to use a _header_content_type.
    Added type/subtype back for compatability with clients.
    
    * gmime-content-field.c: Basically a total rewrite, and now just a
    thin wrapper ontop of header_content_type.
    (_free_parameter): Got rid of it.
    (gmime_content_field_new): Use header_content_type_* functions.
    (gmime_content_field_set_parameter): Likewise.
    (_print_parameter): Blow away.
    (gmime_content_field_write_to_stream): Get details from the
    content_type field.  Should check if it needs to escape chars in
    the paramter value.
    (gmime_content_field_get_mime_type): Likewise.
    (___debug_print_parameter): Get rid of this rather annoyingly
    named function.
    (gmime_content_field_get_parameter): Simplified function.
    (gmime_content_field_construct_from_string): Fixed this to use a
    real parser.
    (gmime_content_field_is_type): New function to test if a type matches.
    (gmime_content_field_construct_from_string): Track type/subtype
    from subordinate content_type header struct.

    * gmime-rfc2047.[ch]: Removed.  Unused.

    * camel-stream-b64.[ch]: Blown away more duplicated code.

    * Makefile.am: Removed camel-stream-b64.[ch], and
    gmime-base64.[ch].

    * camel-mime-part.c (my_get_content_object): Replaced
    camel-stream-b64 with camel-stream-filter/camel-mime-filter-basic.
    (my_write_content_to_stream): Replaced camel-stream-b64 with the
    camel-stream-filter with an encoder.
    (my_get_content_object): Also implement quoted-printable decoding.
    (my_write_content_to_stream): Also implement quoted-printable
    encoding.
    (my_get_output_stream): Took out stream-b64 code (nothing's being
    executed yet anyway).

    * gmime-base64.[ch]: Blown away.  Not used, dont need it.

    * camel-mime-utils.h: Added offset for this header.  Records where
    it is in the source.

    * camel-mime-utils.c (header_raw_append_parse): Add offset
    parameter, to store where the header is stored in the stream.
    (header_raw_append): Added offset param.
    (header_raw_find): Return offset, if a pointer supplied for it.
    (header_raw_replace): Add offset param.
    (header_content_type_new): New function, to create an empty
    content type.
    (header_content_type_set_param): Set a parameter in the
    content-type.
    (header_set_param): Generic header parameter setting function.
    (header_decode_string): Handle NULL input.

    * camel-mime-parser.c (camel_mime_parser_headers_raw): New
    function to get access to all the raw headers.
    (folder_scan_header): Keep track of the header start position, and
    store it when saving the header.

2000-04-11  NotZed  <NotZed@HelixCode.com>

    * camel-mime-utils.c: Moved a bunch of printf's to debug.

    * camel-mime-parser.c: Moved a bunch of printf's to debug.
    (folder_scan_header): Detect end of each header line using the
    last scanned char, and not the last scanned position.

    * camel-mime-filter-index.[ch]: Indexing filter.  Indexes unicode
    sequences into ibex files.

2000-04-09  NotZed  <NotZed@HelixCode.com>

    * camel-mime-part.c: Dont include gmime-base64.h

    * camel-mime-filter-charset.c (complete): Implement the completion
    function.

    * camel-mime-parser.c (folder_scan_step): If we get to the end of
    the body data, check any filters for outstanding completion data.
    (camel_mime_parser_scan_from): Set whether we scan for "From "
    headers or not.

    * camel-stream-filter.c (do_read): If we get to end of stream on
    the source, then call the filtering completion function to see if
    we have any more data to return.

    * camel-mime-filter-basic.c (filter): Implement quoted printable
    encoding and decoding filters.
    (complete): And the complete function as well.

    * camel-mime-utils.c (base64_encode_close): Also take an input
    buffer, allow closing of filters.
    (quoted_encode_step): First cut, simple quoted-printable encoder.
    Doesn't handle trailing spaces/tabs on end of line properly yet.
    (quoted_encode_close): Complete a quoted-encoding.
    (is_qpsafe): New type check, for quoted-printable safe characters
    (that do not need encoding).  Thats all bits used in the type
    table!  Rebuilt the types table.
    (header_content_type_is): Checks a content type against at
    type/subtype match.
    (header_content_type_param): Handle NULL content type pointer.

2000-04-08  NotZed  <NotZed@HelixCode.com>

    * camel-mime-filter-basic.c (filter): Implement the base64
    encoder.  Problem is, there is no way to know when to close it.
    Close/Reset will have to provide the same args as filter, so it can
    flush remaining data *sigh*

    * camel-mime-utils.c (base64_encode_step): A rather complex base64
    encoder, fast?
    (base64_step_close): Companion function to finish off the base64
    sequence.

    * camel-mime-part.c (my_write_content_to_stream): Changed to use
    camel_stream_write_to_stream().

    * camel-stream.[ch] (camel_stream_write_to_stream): From
    camel_stream_b64_write_to_stream().  Fixed some infinite loop
    bugs with error conditions.

    * camel-stream-b64.[ch] (camel_stream_b64_write_to_stream): Removed.
    This has nothing to do with stream-b64, so i've moved it to
    CamelStream.

    * camel-mime-utils.h: Add a comment about refcounting
    header_content_type struct.

    * Makefile.am: Added camel-stream-filter*.[ch].

    * camel-stream-filter.[ch]: Class to implement a generic
    (multipass) filter ontop of a stream.  Only implements a read-only
    stream.

    * camel-mime-parser.c (camel_mime_parser_filter_add): Ref the
    filter we just added.

    * Makefile.am: Added camel-mime-filter*.[ch].

    * camel-mime-filter-charset.[ch]: A filter to preform character set
    conversion (uses unicode_iconv).

    * camel-mime-filter-save.[ch]: A simple filter which will save all
    data directly to a file or file descriptor.

    * camel-mime-filter-basic.[ch]: Implements the basic mime filters,
    base64 and quoted-printable decoding (encoding not implemented yet).

    * camel-mime-filter.[ch]: A filtering class, which can filter streams
    of data without having to copy them.  Simpler than stream classes,
    and can be plugged into a single stream class (when i write it).

2000-04-07  Dan Winship  <danw@helixcode.com>

    * providers/pop3/camel-pop3-store.c (pop3_connect): Clarify error
    messages.
    (finalize): fix a bug in camel_exception usage
    (pop3_connect): Remember the password after asking for it the
    first time.

2000-04-07  NotZed  <NotZed@HelixCode.com>

    * Makefile.am: Added camel-mime-parser/camel-mime-utils.

    * camel-mime-parser.c: Fast mime parser.

    * camel-mime-utils.c: Mime utility functions, and email header
    parsers.

2000-04-07  NotZed  <NotZed@HelixCode.com>

    * providers/Makefile.am: Removed smtp for now, its a long way from
    building.
    * providers/smtp/Makefile.in: Removed file that shouldn't have been
    checked in.

2000-04-06  Matt Loper  <matt@helixcode.com>

    * camel-folder-pt-proxy.c (_get_full_name): Remove exception param
    from get_full_name() called, since get_full_name() was changed to
    not have an exception in the last param (see dan's notes below).
    (_get_name): same.

2000-04-06  Dan Winship  <danw@helixcode.com>

    * camel-store.[ch]: Reorganize the folder-fetching methods and
    implement a folder cache so that multiple requests for the same
    folder will yield the same CamelFolder object (as long as it
    remains active). Includes some code to remove no-longer-active
    folders from the cache, but it doesn't get used since nothing is
    ever unref'ed in Camel right now...
    
    * providers/mbox/camel-mbox-store.c:
    * providers/pop3/camel-pop3-store.c: update for CamelStore
    changes.

    * camel-folder.[ch]: Remove the (unused) CamelException argument
    from camel_folder_get_name and camel_folder_get_full_name.
    (camel_folder_set_name): make this go away since changing a
    folder's name after it has been created could result in it
    conflicting with a separately-issued folder.
    
2000-04-05  Dan Winship  <danw@helixcode.com>

    * g_url_new really wanted to take a CamelException. So, rename
    Gurl to CamelURL, g_url_* to camel_url_* (with camel_url_new
    taking an exception), and url-util.[ch] to camel-url.[ch]. Also
    force url->port to be numeric and remove camel_service_getport. (I
    was confused before: the URL RFC says the port must be numeric, so
    we don't want to do getportbyname.)

2000-04-01  Dan Winship  <danw@helixcode.com>

    * providers/mbox/camel-mbox-folder.c
    (_check_get_or_maybe_generate_summary_file): Compare
    mbox_file_size and mbox_modtime to the results of stat()ing the
    mbox file, not the summary file. Duh.
    (_close): Update the summary's mbox_file_size and mbox_modtime
    before writing it to disk.

    * providers/mbox/camel-mbox-summary.c (camel_mbox_summary_save,
    camel_mbox_summary_load): Wow. I must have been tired when I wrote
    this code. First, the comparison bug above. Second, it was using
    ntohs and htons instead of ntohl and htonl. Third, I was reading
    the status flag byte in two different places and thus getting out
    of sync. Fourth, it was writing out field_length bytes of each
    header field after having converted field_length to network byte
    order, resulting in lots of random crap being appended, and the
    summary files being huge. (Fortunately, since the size/modtime
    comparison was biffed, the garbage summary read from disk was
    always immediately discarded.)

    * providers/mbox/camel-mbox-parser.c (camel_mbox_parse_file): fix
    an off-by-one error that caused the last-used UID to be reused if
    the summary file was regenerated. (That one wasn't my fault. :-)

2000-03-31  Dan Winship  <danw@helixcode.com>

    * camel-stream-mem.c: implement unimplemented methods

    * gmime-content-field.c
    (gmime_content_field_construct_from_string):
    * data-wrapper-repository.c
    (data_wrapper_repository_get_data_wrapper_type):
    * camel-simple-data-wrapper.c (my_write_to_stream):
    * camel-mime-part.c (my_set_input_stream):
    remove debugging printf()s that no longer seem useful.

2000-03-31  Matt Loper  <matt@helixcode.com>

    * camel-formatter.c (text_to_html): Added "convert_newlines_to_br"
    boolean param, to give the option of not converting '\n's to <br>
    tags. This way, when we stick stuff in a <pre> tag, newlines stay
    newlines.

2000-03-30  Matt Loper  <matt@helixcode.com>

    * camel-formatter.c (handle_text_plain): Use <pre> tag to force
    the use of monospaced fonts.

2000-03-30  Dan Winship  <danw@helixcode.com>

    * camel-service.c (camel_service_getport): Add a htons in the
    default_number case, and document the fact that the function
    returns the port in network byte order.

    * providers/pop3/camel-pop3-store.c (pop3_connect): Revert
    Miguel's change. The port number bug was actually somewhere
    else, and the IP address copying code was fine already.
    
2000-03-29  Miguel de Icaza  <miguel@gnu.org>

    * providers/pop3/camel-pop3-store.c (pop3_connect): Add htons
    (port), and only copy 4 bytes for the IP address to prevent a DNS
    attack. 

2000-03-28  Dan Winship  <danw@helixcode.com>

    * camel-seekable-substream.c
    (camel_seekable_substream_new_with_seekable_stream_and_bounds):
    make this return a CamelStream rather than a
    CamelSeekableSubstream, because that's the way Gtk objects tend to
    work.

    * camel-service.c (camel_service_gethost,
    camel_service_getport): convenience functions to canonicalize
    the host and port values of a service's URL.
    * providers/pop3/camel-pop3-store.c: use them

    * providers/mbox/camel-mbox-folder.c
    (_check_get_or_maybe_generate_summary_file): Make this work when
    the inbox file doesn't yet exist.

2000-03-27  Dan Winship  <danw@helixcode.com>

    * providers/mbox/camel-mbox-folder.c (_append_message): uncomment
    the call to unlink the temp file: there's no way to tell
    camel_stream_fs to truncate a file, so reusing the same file was
    resulting in junk at the ends of messages.

    * camel-folder.[ch]: add delete_message_by_{number,uid}.

    * providers/pop3/camel-pop3-folder.[ch]: implement
    delete_message_by_uid. Add a close method to do expunging
    of deleted messages if requested.

    * providers/pop3/camel-pop3-store.[ch]: support for
    CamelPop3Folder::close. (You have to close the connection
    in order to expunge the folder, thus the store may be
    connected in the CamelService::is_connected sense when it
    is not actually connected to the server.) Also some bugfixes.

2000-03-27  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-folder.c (_append_message): Unref the
    output_stream when done, close doesn't do it.
    (_append_message): Clear all uid's from the appending messages, so
    they are reassigned proper unique id's.

    * gmime-utils.c (get_header_array_from_stream): Actually free the
    header, it is copied elsewhere.

2000-03-26  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Added
    folder parameter to function.  Fixed callers.
    (index_message): Index a message as it is assigned a unique id.

    * camel-mime-part.c (my_set_content_id): Make sure we malloc and
    copy the content_id, otherwise *poof*

2000-03-25  NotZed  <NotZed@HelixCode.com>

    * camel-medium.c (_finalize): Another leak, unref the content if
    finished with it.

    * camel-recipient.c (camel_recipient_table_free): Plug another
    memory leak - actually free the recipient table.

    * camel-mime-message.c (_finalize): Plugged a memory leak with the
    flags table.

    * gmime-utils.c (_store_header_pair_from_string): A simpler, more
    debuggable and functionally identical header extraction function.

2000-03-24  NotZed  <NotZed@HelixCode.com>

    * gmime-content-field.c (gmime_content_field_set_parameter):
    Remove the hash table entry before freeing its key and data.

2000-03-27  Dan Winship  <danw@helixcode.com>

    * providers/Makefile.am (SUBDIRS): Add pop3.

    * providers/pop3/camel-pop3-store.c: keep separate input and
    output streams so the output doesn't end up being buffered.

    * providers/pop3/camel-pop3-folder.c (get_message_by_number):
    finish implementing this.

2000-03-27  Michael Meeks  <michael@helixcode.com>

    * camel-mime-part.c (my_set_disposition): fix so less broken.
    (my_finalize): remove dodgy disposition free.

    * camel-data-wrapper.c (my_set_mime_type_field): unref instead of
    free on mime_type.

2000-03-27  Dan Winship  <danw@helixcode.com>

    * camel-service.c (camel_service_free_auth_types): new routine to
    free the data allocated by camel_service_query_auth_types.

    * providers/pop3/camel-pop3-store.c (free_auth_types): implement

    * camel-stream-mem.c (camel_stream_mem_new_with_buffer): rename
    camel_stream_mem_new_with_buffer to ..._with_byte_array and add a
    new ..._with_buffer that takes a char * rather than a GByteArray.

    * Remove CamelStreamBufferedFs, since CamelStreamBuffer makes it
    redundant.

2000-03-25  Dan Winship  <danw@helixcode.com>

    * camel-folder-summary.[ch]: change the CamelFolderSummary
    interfaces to allow partial summary queries (for dealing
    with very large folders). Remove the "extended_fields" from
    CamelFolderInfo and CamelMessageInfo: this is better dealt
    with by subtyping.

    * providers/mbox/camel-mbox-summary.[ch]: Make CamelMboxSummary a
    subclass of CamelFolderSummary. Update interfaces for that. Remove
    the internal/external summary distinction. Remove the (unused) md5
    checksum in the folder summary. Change the summary file format
    (primarily to make it no longer byte-order dependent) and add a
    version number to it so it will be easier to change in the future.
    
    * providers/mbox/camel-mbox-folder.[ch]
    * providers/mbox/camel-mbox-search.c
    * providers/mbox/camel-mbox-utils.c: update for summary changes

    * camel-exception-list.def: add
    CAMEL_EXCEPTION_FOLDER_SUMMARY_INVALID
    
2000-03-23  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-provider.c: Added flag to provider
    initialisation, to match changed structure.

2000-03-22  NotZed  <NotZed@HelixCode.com>

    * camel-folder.[ch]: Added async search api.

    * providers/mbox/camel-mbox-search.c
    (camel_mbox_folder_search_by_expression): Changed to use an
    asynchronous interface.
    (camel_mbox_folder_search_cancel): Cancel function for async
    interface.

2000-03-23  Dan Winship  <danw@helixcode.com>

    * camel-stream-buffer.c (camel_stream_buffer_read_line): Function
    to read one line of any size from a stream and return it in
    allocated memory.

2000-03-22  Dan Winship  <danw@helixcode.com>

    * camel-service.c (camel_service_query_auth_types): New function
    to query a service for the authentication protocols it supports.
    * providers/pop3/camel-pop3-store.c (query_auth_types): implement

    * camel-provider.c (camel_provider_scan): New function to
    scan the provider dir and return a list of all providers.

    * providers/pop3/camel-pop3-folder.c: fill this in partially
    * providers/pop3/camel-pop3-store.c: make camel_pop3_command
    return the text after "+OK"/"-ERR" and add a separate
    camel_pop3_get_additional_data to get the message body or
    whatever. Also make them take a CamelPop3Store rather than
    a CamelStreamBuffer.

2000-03-22  Matt Loper  <matt@helixcode.com>

    * camel-formatter.c (debug): Disabled some useless debug
    messaging.

2000-03-21  Dan Winship  <danw@helixcode.com>

    * providers/pop3: some initial bits of the POP3 provider, to
    make Matt happy. Incomplete, untested, etc.

2000-03-21  bertrand  <bertrand@helixcode.com>

    * providers/mbox/camel-mbox-summary.c 
    (camel_mbox_summary_append_internal_to_external): copy the size field

    * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): initialize 
    message_info to NULL

    * camel-folder-summary.h: added the size field.

    * providers/mbox/camel-mbox-summary.h: 
    added the received_date field.

    * providers/mbox/camel-mbox-summary.c:
    documented all functions.

    * camel-folder-summary.h: name change and 
    new fields.

    * providers/mbox/camel-mbox-search.c: update to 
    conform to name change in the summary fields.

2000-03-10  bertrand  <bertrand@helixcode.com>

    * camel-service.h: cosmetic changes.

2000-03-09  Dan Winship  <danw@helixcode.com>

    * s/HelixCode/Helix Code, Inc./ in the copyrights

2000-03-07  bertrand  <bertrand@helixcode.com>

    * camel-formatter.c (handle_mime_part): 
    plug mem leaks due to bad documentation
    of camel_content_field_get_mime_type
    (print_camel_body_part): idem
    (handle_multipart_alternative): idem

    * gmime-content-field.c (gmime_content_field_get_mime_type): 
    documentation fix.


    * camel-mime-part.c (my_finalize): unref the 
    content_input_stream if any. 

2000-03-06  bertrand  <bertrand@helixcode.com>

    * camel-stream-fs.c (_seek): fix a bogus calculation
    in the return position.

2000-03-05  bertrand  <bertrand@helixcode.com>

    * camel-session.h: cosmetic fixes.

    * camel-stream-fs.c (_read): 
    (_seek): fixed the current position so that it refers
    to the current position in the stream, not in its parent.

2000-03-04  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-search.c
    (camel_mbox_folder_search_by_expression): Ref the summary
    after we have got it.

2000-03-04  bertrand  <bertrand@helixcode.com>

    * camel-mime-part.c (my_write_content_to_stream): 
    stream the raw content instead of nothing if the encoding
    is not supported.

    * camel-stream-fs.c (_seek): handle eos more
    properly.

    * camel-formatter.c (get_bonobo_tag_for_object): 
    bonobo-goad-id is the good key to look for. 
    (get_bonobo_tag_for_object): close the <object> tag.
    (get_bonobo_tag_for_object): the correct syntax for the
    to set a parameter inside an <object> tag is :
    <object classid="..."> <param name="uid" value="..."> <param ...>
    </object>

2000-03-03  bertrand  <bertrand@helixcode.com>

    * providers/mbox/camel-mbox-folder.c (_get_message_by_uid): 
    use set_input_stream instead of construct_from_stream
    to feed the message object. 

    * camel-data-wrapper.c (my_write_to_stream): reset output stream.
    (my_set_input_stream): unref the previous input stream.
    use the set_output_stream for default behaviour.
    (my_set_output_stream): unref previous output stream.

    * camel-mime-part.c (my_write_content_to_stream): reset content
    object output stream.

2000-03-03  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Make
    sure we open with create with a creation mask.

2000-03-01  NotZed  <NotZed@HelixCode.com>

    * camel-mime-part-utils.c
    (camel_mime_part_construct_content_from_stream): DO NOT assert on
    content type, we have fallback code 4 lines below it ... *sigh*

2000-02-29  NotZed  <NotZed@HelixCode.com>

    * Makefile.am (libcamelinclude_HEADERS): Added camel-stream-buffer
    to build.

    * camel-stream-buffer.[ch]: Generic buffer which can be applied to
    any stream.

2000-03-03  bertrand  <bertrand@helixcode.com>

    * camel-formatter.c (handle_image): in the case
    of images, put the content object output stream
    in the url. This allows the message browser
    to show inline images.

    * camel-stream-b64.c (my_read_encode): fixed state
    0 keep value. 

2000-03-02  bertrand  <bertrand@helixcode.com>

    * camel-stream-b64.c (my_read_encode): don't forget to 
    set the state to 0 after 3.
    (my_read_encode): don't forget to encode, even in state 3.

    * camel-simple-data-wrapper.c: static functions are prefixed 
    with my_ instead of _
    * camel-multipart.c: static functions are prefixed 
    with my_ instead of _
    (my_write_to_stream): commented.
    (my_write_to_stream): warning in case the boudary is set
    but is a zero length string.

    * camel-mime-part.c (camel_mime_part_encoding_from_string): 
    remove debug trace. 
    
    * camel-mime-part.c: Replaced all static functions
    with name begining with _ by the same name begining
    with "my_" to prevent the possible conflicts 
    with system symbols Dan warned us about. 
    
    * camel-stream-b64.c (camel_stream_b64_write_to_stream): 
    use CamelStreamB64 type for the input stream.

    * camel-mime-part.c (_get_content_object): remove 
    debugging trace
    (_write_content_to_stream): implement the b64 
    encoding the new way (that is using camel_stream_b64)

    * camel-data-wrapper.c (my_write_to_stream): 
    fix implementation so that it writes properly
    to the output stream even.

    * camel-stream-b64.c (camel_stream_b64_write_to_stream): 
    fix implementation. 

2000-02-29  bertrand  <bertrand@helixcode.com>

    * camel-stream-b64.c (camel_stream_b64_write_to_stream): new
    utility function. 

    * camel-data-wrapper.c (_write_to_stream): default
    implementation. 

    * gmime-utils.c (_store_header_pair_from_string): 
    revert strange changes. 

    * camel-stream-b64.c (my_read_decode): set eos to true when we
    have read the whole input stream. 
    (my_reset): set eos to FALSE.

2000-02-28  NotZed  <NotZed@HelixCode.com>

    * camel-mime-part.c (_parse_header_pair): Dont free this either.

    * camel-medium.c (_remove_header): Ugh, dont free the header
    before we actually remove it.
    (_add_header): Ugh, dont free hashtable entries which may be
    duplicated (hash_insert _will_ reference that memory).

    * string-utils.c (string_trim): Trimming a 0-length string is not
    an error.

    * camel-mime-message.c (_parse_header_pair): Fixed very broken
    memory handling of header_name/value.

    * providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev):
    Initialise end_of_last_message always.
    (camel_mbox_copy_file_chunk): Stop trying to read if we run out of
    data, rather than looping forever.
    (camel_mbox_write_xev): Use an open flag when opening with create.

    * camel-folder.c (camel_folder_search_by_expression): No, its not
    a fatal error to search on a non-searchable folder, you just dont
    get any matches.
    (_open): Dont open an opened folder (i dont see why this is really
    a bug, but what the hell ...)

    * providers/mbox/camel-mbox-folder.c (_init): Set search cap on.
    (_open): Call parent class to perform open.  Remove folder-open
    check to parent instead.
    (_create): open takes a creation mask, dont use umask to try and
    set the open mode.
    (_delete): Dont bother checking folder==NULL, its already been
    checked on the external interface (changed to an assertion, this
    would have to be a camel bug).
    (_delete_messages): Likewise.
    (_create): Ditto.
    (_init): Dont go and clear all the paths and shit that the parent
    open just setup for us.
    (_delete_messages): Get rid of more umask stuff.
    (_append_message): Make sure we pass file mode to open with create.
    (_append_message): Cleaned up some indenting to make it readable.

    * camel-stream-b64.c (my_read_encode): Fixed a typo.

    * providers/mbox/camel-mbox-search.c: Changed to use e-sexp,
    rather than filter-sexp.

2000-02-28  bertrand  <bertrand@helixcode.com>

    * camel-stream-b64.c (my_read_encode): encoding
    filter.

2000-02-23  bertrand  <Bertrand.Guiheneuf@aful.org>

    * camel-stream-b64.c: changed the __static 
    suffix into a my_ prefix. 
    (camel_stream_b64_set_mode): reset the persistent
    status. 
    (my_read_decode): remove superfluous %
    
    * providers/mbox/camel-mbox-utils.c (camel_mbox_copy_file_chunk): 
    fix exception description message.

2000-02-24  Dan Winship  <danw@helixcode.com>

    * camel-session.c: Add camel_session_get_transport_for_protocol.

    * camel-transport.h:
    * camel-transport.c: Add an abstract CamelTransport class.

    * providers/sendmail/*: A CamelTransport that uses sendmail
    to deliver mail.

2000-02-24  Dan Winship  <danw@helixcode.com>

    * camel-folder.c: use CamelExceptions for run-time errors, not
    incorrect code. Don't bother validating that an object exists from
    inside one of its methods, since you couldn't have gotten there if
    it didn't. Fix some code style bugs.

    (_init): Rename init_with_store to init and add parent_folder,
    separator, and name arguments.
    (_set_name): Get separator from self, not parent_store now.

    * camel-store.h:
    * camel-store.c: Remove get/set_separator.

    * providers/mbox/: Update for above.

2000-02-23  Dan Winship  <danw@helixcode.com>

    * camel-medium.c (_finalize): Free the data in the headers hash
    table.
    (_add_header): g_strdup the header name and value when adding it.

    * camel-mime-part-utils.c
    (camel_mime_part_construct_headers_from_stream): Free the header
    data after calling camel_medium_add_header, since it will have
    g_strdup()ed it itself.

2000-02-22  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-search.c: Dont compile by default.

    * providers/mbox/Makefile.am: Fuck off the filter code.

2000-02-22  bertrand  <Bertrand.Guiheneuf@aful.org>

    * camel-stream-b64.c (read_decode__static): 
    don't read the char if we reached the length
    of the output buffer. Hours lost on this
    %$!@# bug : 3.5

    * camel-folder.c (camel_folder_get_subfolder): 
    (camel_folder_create): 
    (camel_folder_delete): 
    (camel_folder_delete_messages): 
    (camel_folder_list_subfolders): 
    (camel_folder_expunge): 
    (camel_folder_get_message_by_number): 
    (camel_folder_get_message_count): 
    (camel_folder_append_message): 
    (camel_folder_copy_message_to): 
    (camel_folder_get_summary): 
    (camel_folder_get_message_uid): 
    (camel_folder_get_message_by_uid): 
    (camel_folder_get_uid_list): 
    Check folder state (open/close) and raise an
    exception if it is not ok. 
    
    * providers/mbox/camel-mbox-folder.c (_create): 
    create the file and the path with two different
    names.

    * camel-folder.c (_create): handle the case 
    when the folder name starts with '/'

    * camel-exception.c (camel_exception_new): use 
    (void) instead of () in decl.

    * camel-exception.h: cosmetic fixes.

    * camel-exception.c (camel_exception_init): new routine.
    Fix a bug in mail/message-list.c
    

    * camel-folder.h: cosmetic changes.

    * camel-stream-b64.c (reset__static): added a
    reset method. Thanks message-browser to find
    so much bugs :)

    * providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): readd
    Unicode libs.

2000-02-21  bertrand  <Bertrand.Guiheneuf@aful.org>

    * camel-formatter.c (lookup_unique_id): 
    awful hack to test get_output_stream.
    * camel-stream-b64.[ch] :
    b64 encoding/decoding is now implemented as
    a stream. 
    

2000-02-21  bertrand  <Bertrand.Guiheneuf@aful.org>

    * camel-seekable-substream.c (_reemit_parent_signal): 
    emit "data_available" when parent stream emits it. 


2000-02-21  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/Makefile.am: Uh, fixed LIBADD again.  What was
    there was never ever going to work, wasn't it tested?


2000-02-21  Dan Winship  <danw@helixcode.com>

    * camel-session.h: (struct _CamelSession): Add authenticator.

    * camel-session.c (camel_session_new): Add authenticator.
    (camel_session_query_authenticator): New function to query the
    session authenticator for password, etc, information.

2000-02-21  Dan Winship  <danw@helixcode.com>

    * camel-session.c: add CamelExceptions to several functions. Use
    camel_session_new to initialize the session and URL fields of
    created CamelStores as appropriate.

    * camel-store.h:
    * camel-store.c
    * camel-service.h:
    * camel-service.c: Move the session and url (and associated
    functions) from CamelStore to CamelService. Add url_flags to
    CamelService so subclasses can specify which URL components
    are mandatory for them. Add camel_session_new for
    camel_session_get_store* to use.

    * providers/mbox/camel-mbox-folder.c:
    * providers/mbox/camel-mbox-store.c:
    * providers/mbox/camel-mbox-store.h: Update for above changes.

    * camel-exception-list.def: Once camel is being used for real,
    exceptions won't be renumberable. So renumber them now to make
    more room to add exceptions to the various categories later, and
    add a big warning message.

2000-02-20  Dan Winship  <danw@helixcode.com>

    * providers/mbox/Makefile.am: add libibex back to
    libcamelmbox_la_LIBADD

2000-02-18  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/camel-mbox-search.h
    (camel_mbox_folder_search_by_expression): Added exception to call,
    and fixed caller.

    * providers/mbox/camel-mbox-search.c
    (camel_mbox_folder_search_by_expression): Major changes, to use
    the sexp evaluator from filter/filter-sexp.c to implement the
    searching.
    (func_body_contains): Changed to support multiple strings in 1
    command (results or'd together)

    * url-util.c (g_url_new): Fixed a typo (colon == 0 isn't right),
    and made it so full url's are absolute pathed (Dan, this is how it
    has to work!).  Also, always include a path part, even if it is an
    empty string.

2000-02-18  Dan Winship  <danw@helixcode.com>

    * camel/camel-types.h: New header with the typedefs for all camel
    classes. Now the class headers can just include this and the
    header for the parent type. This makes it possible for
    CamelService to include a CamelSession without creating an
    #include loop.

    * camel/*:  
    * composer/e-msg-composer-attachment-bar.h:
    * mail/folder-browser.c:
    * mail/message-list.c: frob #includes to match the new reality

2000-02-17  Dan Winship  <danw@helixcode.com>

    * camel/camel-service.h:
    * camel/camel-service.c: Make camel-service us a Gurl internally.
    Remove the login/password interfaces and instead provide
    camel_service_connect_with_url. Add CamelExceptions

2000-02-17  bertrand  <Bertrand.Guiheneuf@aful.org>

    * camel/camel-formatter.c (handle_text_plain): 
    (handle_text_html): use camel_stream_reset instead
    of seek. The formatter should be able to work 
    with all streams, not only seekable streams. 
    In the case where some provider implementation
    would not be able to provide a reset method 
    to their stream, implementors would have
    to find a workaround.

    * camel/camel-session.c (camel_session_new): use
    (void) instean of () in function decl.

    * camel/camel-folder.c: ifdef async operation 
    related code. 

    * camel/camel-seekable-stream.c (_seek): added a warning.
    (_reset): default implementation of reset for seekable
    stream.

    * camel/camel-mime-message.h: set_received_date declaration fix.
    cosmetic changes.

    * camel/providers/mbox/camel-mbox-provider.c (camel_provider_module_init): 
    use (void) instead of ().

    * camel/camel-stream.c (camel_stream_reset): 
    new method for CamelStream.

2000-02-17  Dan Winship  <danw@helixcode.com>

    * camel/url-util.c (g_url_to_string): New function to convert
    a Gurl back into a char *.

2000-02-17  bertrand  <Bertrand.Guiheneuf@aful.org>

    * camel/camel-formatter.c (handle_text_plain): 
    revamped so that it uses the output stream
    of the data wrapper
    (handle_text_html): ditto.
    
    
    * camel/camel-simple-data-wrapper.h: 
    * camel/camel-simple-data-wrapper.c (camel_simple_data_wrapper_new): 
    use (void) instead of ().
    (_get_output_stream): simple implementation. 

2000-02-16  bertrand  <Bertrand.Guiheneuf@aful.org>

    * camel/camel-data-wrapper.c (_set_input_stream): ref input stream
    (_set_output_stream): ref output stream
    (_finalize): unref input and output streams

    * camel/camel-seekable-substream.c (_set_bounds): don't
    seek the begining of the substream.
    (_eos): fix eos condition testing. 
    (_finalize): unref parent stream
    (_init_with_seekable_stream_and_bounds): ref parent stream

    * camel/gstring-util.c (g_string_equal_for_hash): 
    (g_string_equal_for_glist): return type is int.

    * camel/camel.h: 
    * camel/camel.c (camel_init): use (void) 
    instead of ().
    
2000-02-16  NotZed  <NotZed@HelixCode.com>

    * providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Added
    libfilter to link line (temporarily?).  Required for
    filter-sexp.

2000-02-15  bertrand  <bertrand@helixcode.com>

    * camel/camel-multipart.c (_localize_part): 
    this routine replaces the _read_part routine
    and does not store the part in a buffer. 
    (_set_input_stream): use the set_input_stream
    instead of the construct_from_stream.
    each bodypart is given an input stream. 

    * camel/camel-mime-part-utils.c: 
    include the data-wrapper-repository header. 
    (camel_mime_part_construct_content_from_stream): 
    use the set_input_stream instead of the 
    construct_from_stream method. 

    * camel/camel-seekable-substream.c (_set_bounds): 
    cur position is set to 0 not to inf_bound.

2000-02-15  bertrand  <Bertrand.Guiheneuf@aful.org>

    * camel/camel-mime-part.c: include gmime-base64.h
    various compilation and runtime fixes.
    (_set_input_stream): store the input substream 
    for the content object.

    * camel/camel-data-wrapper.h: declare the 
    set/get function on input/output stream.

    * camel/camel-mime-part.c (_get_content_object): 
    don't use a temporary mem stream.   

    * camel/camel-seekable-substream.c (_seek): 
    (_eos): 
    (_read): the substream can be unlimited in length

    * camel/camel-data-wrapper.c (camel_data_wrapper_class_init): 
    set the get/set_input/output_stream methods.    

    * camel/camel-multipart.c (_construct_from_stream): 
    camel_stream_seek -> camel_seekable_stream_seek

2000-02-14  Miguel de Icaza  <miguel@gnu.org>

    * camel/providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Add
    the unicode libraries as well.

    * camel/camel-provider.c (camel_provider_register_as_module): Add
    error reporting here.  Desire to use Solaris increases.  Hair loss
    in the last two hours: 5,400.

    * camel/providers/mbox/camel-mbox-provider.c
    (camel_mbox_get_provider): Renamed function.

    * camel/camel.h: All include files use camel/ now here.

    * camel/providers/mbox/Makefile.am: Drop all the dynamism from
    Camel, and make this a standard library.

2000-02-14  bertrand  <Bertrand.Guiheneuf@aful.org>

    * camel/gmime-utils.c (get_header_array_from_stream): use the 
    eos stream method. 
    (gmime_read_line_from_stream): ditto.

    * camel/camel-stream-fs.h (struct ): add the eof field
    cosmetics changes. 

    * camel/camel-stream-fs.c (camel_stream_fs_init): set eof.
    (_read): set eof on end of file.
    (_eos): implemented.

    * camel/gmime-utils.c (get_header_array_from_stream): 
    make a blocking version of the header parser. 
    When the fs stream uses gnome-vfs, this should
    be changed. 
    (gmime_read_line_from_stream): ditto. 

2000-02-11  bertrand  <Bertrand.Guiheneuf@aful.org>

    * camel/camel-stream-fs.c: 
    everywhere, when using the cur_pos field, do it
    on the CamelSeekableStream object.
    (_seek): small fix. 

    * camel/camel-seekable-stream.c (camel_seekable_stream_seek): 
    s/camel_stream_seek/camel_seekable_stream_seek/g

    * camel/camel-seekable-stream.h: 
    (struct ): added a field to store the
    current position.

    * camel/camel-seekable-stream.c (camel_seekable_stream_get_current_position): 
    New function. Allows to get the current position 
    of a seekable stream.
    

2000-02-13  NotZed  <notzed@zedzone.helixcode.com>

    * providers/mbox/camel-mbox-search.c: New file, implements the
    search api for mbox folders.

    * providers/mbox/Makefile.am: Link with ibex.

    * camel-folder.c (camel_folder_has_search_capability): Api
    additions.
    (camel_folder_search_by_expression): Ditto.

2000-02-12  NotZed  <notzed@zedzone.helixcode.com>

    * providers/mbox/camel-mbox-folder.c (_set_name): Setup index
    filename as well.
    (_init_with_store): Init index filename.  Hmm, none of these
    names ever seem to get free'd (FIXME?)

    * providers/mbox/camel-mbox-folder.h: Add index file name.

2000-02-12  NotZed  <notzed@helixcode.com>

    * camel-folder.h: Add folder search functions.

    ** Created ChangeLog just for camel **
     - refer to ../ChangeLog for changes prior to this date.