From f010bd39cf21bd0bd9d28b16f8141500ddefed8e Mon Sep 17 00:00:00 2001 From: Kjartan Maraas Date: Wed, 15 Aug 2001 20:26:26 +0000 Subject: Added beginnings of a Norwegian translation. Forgot to add this. Kinda 2001-08-15 Kjartan Maraas * no/*: Added beginnings of a Norwegian translation. * sgmldocs.make: Forgot to add this. Kinda important. svn path=/trunk/; revision=12070 --- help/no/config-sync.sgml | 128 +++++++++++++++++++++++++++++++++++++++++++++++ 1 file changed, 128 insertions(+) create mode 100644 help/no/config-sync.sgml (limited to 'help/no/config-sync.sgml') diff --git a/help/no/config-sync.sgml b/help/no/config-sync.sgml new file mode 100644 index 0000000000..8f3b30d1f0 --- /dev/null +++ b/help/no/config-sync.sgml @@ -0,0 +1,128 @@ + + Setting up your synchronization system + + Synchronization presents you with two issues you'll need to + address. + + + Your computer needs to recognize and access your handheld. + At this time, Evolution only + supports Palm-OS devices like the PalmPilot and the + Handspring Visor. + + + You should decide what sort of synchronization behavior you + want. + + + + + + + If you haven't used a handheld device with your computer + before, you'll need to run the GNOME Control + Center and make sure that Pilot + Link is properly configured. Then, select the + Evolution conduits under the + Pilot Conduits section of the Control + Center. + + + + Once your computer and your Palm-OS device are talking happily + to each other, you'll have to decide what exactly you want + them to do with the data they exchange. To enable a conduit, click the + Enable to enable it and click + Settings. Your options may vary + depending on the conduit, but typically they will be: + + + + Disabled + + + Do nothing. + + + + + + Synchronize + + + Copy new data from the computer to the handheld, and + from the handheld to the computer. Remove items + that were on both systems but have been deleted on + one. + + + + + + Copy From Pilot + + + If there is any new data on the the handheld device, + copy it to the computer. + + + + + + Copy To Pilot + + + Copy new data from the computer to the handheld. + + + + + + Merge From Pilot + + + Copy new data from the handheld to the computer, and + remove any information from the computer that has + been deleted on the handheld. + + + + + + Merge To Pilot + + + Copy new data from the computer to the handheld, and + remove any information from the handheld that has + been deleted on the computer. + + + + + + + + Select a behavior for each conduit available. For the most + part, you'll want to stick with + Synchronize. Then, put your handheld on + its cradle and press the synchronization button. + + + + + + Data Loss Prevention + + It's always a good idea to make a backup. To do that, + make a copy of your + ~/evolution directory. + + + + + + + + + -- cgit v1.2.3