From 200606f92810d3de322e5ee96f8326e1a656f8bb Mon Sep 17 00:00:00 2001 From: JP Rosevear Date: Fri, 7 Nov 2003 05:52:24 +0000 Subject: Various changes to merge in evolution-data-server reliance. svn path=/trunk/; revision=23206 --- addressbook/backend/ebook/docs/rfc2047.txt | 843 ----------------------------- 1 file changed, 843 deletions(-) delete mode 100644 addressbook/backend/ebook/docs/rfc2047.txt (limited to 'addressbook/backend/ebook/docs/rfc2047.txt') diff --git a/addressbook/backend/ebook/docs/rfc2047.txt b/addressbook/backend/ebook/docs/rfc2047.txt deleted file mode 100644 index ff9a744bf3..0000000000 --- a/addressbook/backend/ebook/docs/rfc2047.txt +++ /dev/null @@ -1,843 +0,0 @@ - - - - - - -Network Working Group K. Moore -Request for Comments: 2047 University of Tennessee -Obsoletes: 1521, 1522, 1590 November 1996 -Category: Standards Track - - - MIME (Multipurpose Internet Mail Extensions) Part Three: - Message Header Extensions for Non-ASCII Text - -Status of this Memo - - This document specifies an Internet standards track protocol for the - Internet community, and requests discussion and suggestions for - improvements. Please refer to the current edition of the "Internet - Official Protocol Standards" (STD 1) for the standardization state - and status of this protocol. Distribution of this memo is unlimited. - -Abstract - - STD 11, RFC 822, defines a message representation protocol specifying - considerable detail about US-ASCII message headers, and leaves the - message content, or message body, as flat US-ASCII text. This set of - documents, collectively called the Multipurpose Internet Mail - Extensions, or MIME, redefines the format of messages to allow for - - (1) textual message bodies in character sets other than US-ASCII, - - (2) an extensible set of different formats for non-textual message - bodies, - - (3) multi-part message bodies, and - - (4) textual header information in character sets other than US-ASCII. - - These documents are based on earlier work documented in RFC 934, STD - 11, and RFC 1049, but extends and revises them. Because RFC 822 said - so little about message bodies, these documents are largely - orthogonal to (rather than a revision of) RFC 822. - - This particular document is the third document in the series. It - describes extensions to RFC 822 to allow non-US-ASCII text data in - Internet mail header fields. - - - - - - - - - -Moore Standards Track [Page 1] - -RFC 2047 Message Header Extensions November 1996 - - - Other documents in this series include: - - + RFC 2045, which specifies the various headers used to describe - the structure of MIME messages. - - + RFC 2046, which defines the general structure of the MIME media - typing system and defines an initial set of media types, - - + RFC 2048, which specifies various IANA registration procedures - for MIME-related facilities, and - - + RFC 2049, which describes MIME conformance criteria and - provides some illustrative examples of MIME message formats, - acknowledgements, and the bibliography. - - These documents are revisions of RFCs 1521, 1522, and 1590, which - themselves were revisions of RFCs 1341 and 1342. An appendix in RFC - 2049 describes differences and changes from previous versions. - -1. Introduction - - RFC 2045 describes a mechanism for denoting textual body parts which - are coded in various character sets, as well as methods for encoding - such body parts as sequences of printable US-ASCII characters. This - memo describes similar techniques to allow the encoding of non-ASCII - text in various portions of a RFC 822 [2] message header, in a manner - which is unlikely to confuse existing message handling software. - - Like the encoding techniques described in RFC 2045, the techniques - outlined here were designed to allow the use of non-ASCII characters - in message headers in a way which is unlikely to be disturbed by the - quirks of existing Internet mail handling programs. In particular, - some mail relaying programs are known to (a) delete some message - header fields while retaining others, (b) rearrange the order of - addresses in To or Cc fields, (c) rearrange the (vertical) order of - header fields, and/or (d) "wrap" message headers at different places - than those in the original message. In addition, some mail reading - programs are known to have difficulty correctly parsing message - headers which, while legal according to RFC 822, make use of - backslash-quoting to "hide" special characters such as "<", ",", or - ":", or which exploit other infrequently-used features of that - specification. - - While it is unfortunate that these programs do not correctly - interpret RFC 822 headers, to "break" these programs would cause - severe operational problems for the Internet mail system. The - extensions described in this memo therefore do not rely on little- - used features of RFC 822. - - - -Moore Standards Track [Page 2] - -RFC 2047 Message Header Extensions November 1996 - - - Instead, certain sequences of "ordinary" printable ASCII characters - (known as "encoded-words") are reserved for use as encoded data. The - syntax of encoded-words is such that they are unlikely to - "accidentally" appear as normal text in message headers. - Furthermore, the characters used in encoded-words are restricted to - those which do not have special meanings in the context in which the - encoded-word appears. - - Generally, an "encoded-word" is a sequence of printable ASCII - characters that begins with "=?", ends with "?=", and has two "?"s in - between. It specifies a character set and an encoding method, and - also includes the original text encoded as graphic ASCII characters, - according to the rules for that encoding method. - - A mail composer that implements this specification will provide a - means of inputting non-ASCII text in header fields, but will - translate these fields (or appropriate portions of these fields) into - encoded-words before inserting them into the message header. - - A mail reader that implements this specification will recognize - encoded-words when they appear in certain portions of the message - header. Instead of displaying the encoded-word "as is", it will - reverse the encoding and display the original text in the designated - character set. - -NOTES - - This memo relies heavily on notation and terms defined RFC 822 and - RFC 2045. In particular, the syntax for the ABNF used in this memo - is defined in RFC 822, as well as many of the terminal or nonterminal - symbols from RFC 822 are used in the grammar for the header - extensions defined here. Among the symbols defined in RFC 822 and - referenced in this memo are: 'addr-spec', 'atom', 'CHAR', 'comment', - 'CTLs', 'ctext', 'linear-white-space', 'phrase', 'quoted-pair'. - 'quoted-string', 'SPACE', and 'word'. Successful implementation of - this protocol extension requires careful attention to the RFC 822 - definitions of these terms. - - When the term "ASCII" appears in this memo, it refers to the "7-Bit - American Standard Code for Information Interchange", ANSI X3.4-1986. - The MIME charset name for this character set is "US-ASCII". When not - specifically referring to the MIME charset name, this document uses - the term "ASCII", both for brevity and for consistency with RFC 822. - However, implementors are warned that the character set name must be - spelled "US-ASCII" in MIME message and body part headers. - - - - - - -Moore Standards Track [Page 3] - -RFC 2047 Message Header Extensions November 1996 - - - This memo specifies a protocol for the representation of non-ASCII - text in message headers. It specifically DOES NOT define any - translation between "8-bit headers" and pure ASCII headers, nor is - any such translation assumed to be possible. - -2. Syntax of encoded-words - - An 'encoded-word' is defined by the following ABNF grammar. The - notation of RFC 822 is used, with the exception that white space - characters MUST NOT appear between components of an 'encoded-word'. - - encoded-word = "=?" charset "?" encoding "?" encoded-text "?=" - - charset = token ; see section 3 - - encoding = token ; see section 4 - - token = 1* - - especials = "(" / ")" / "<" / ">" / "@" / "," / ";" / ":" / " - <"> / "/" / "[" / "]" / "?" / "." / "=" - - encoded-text = 1* - ; (but see "Use of encoded-words in message - ; headers", section 5) - - Both 'encoding' and 'charset' names are case-independent. Thus the - charset name "ISO-8859-1" is equivalent to "iso-8859-1", and the - encoding named "Q" may be spelled either "Q" or "q". - - An 'encoded-word' may not be more than 75 characters long, including - 'charset', 'encoding', 'encoded-text', and delimiters. If it is - desirable to encode more text than will fit in an 'encoded-word' of - 75 characters, multiple 'encoded-word's (separated by CRLF SPACE) may - be used. - - While there is no limit to the length of a multiple-line header - field, each line of a header field that contains one or more - 'encoded-word's is limited to 76 characters. - - The length restrictions are included both to ease interoperability - through internetwork mail gateways, and to impose a limit on the - amount of lookahead a header parser must employ (while looking for a - final ?= delimiter) before it can decide whether a token is an - "encoded-word" or something else. - - - - - -Moore Standards Track [Page 4] - -RFC 2047 Message Header Extensions November 1996 - - - IMPORTANT: 'encoded-word's are designed to be recognized as 'atom's - by an RFC 822 parser. As a consequence, unencoded white space - characters (such as SPACE and HTAB) are FORBIDDEN within an - 'encoded-word'. For example, the character sequence - - =?iso-8859-1?q?this is some text?= - - would be parsed as four 'atom's, rather than as a single 'atom' (by - an RFC 822 parser) or 'encoded-word' (by a parser which understands - 'encoded-words'). The correct way to encode the string "this is some - text" is to encode the SPACE characters as well, e.g. - - =?iso-8859-1?q?this=20is=20some=20text?= - - The characters which may appear in 'encoded-text' are further - restricted by the rules in section 5. - -3. Character sets - - The 'charset' portion of an 'encoded-word' specifies the character - set associated with the unencoded text. A 'charset' can be any of - the character set names allowed in an MIME "charset" parameter of a - "text/plain" body part, or any character set name registered with - IANA for use with the MIME text/plain content-type. - - Some character sets use code-switching techniques to switch between - "ASCII mode" and other modes. If unencoded text in an 'encoded-word' - contains a sequence which causes the charset interpreter to switch - out of ASCII mode, it MUST contain additional control codes such that - ASCII mode is again selected at the end of the 'encoded-word'. (This - rule applies separately to each 'encoded-word', including adjacent - 'encoded-word's within a single header field.) - - When there is a possibility of using more than one character set to - represent the text in an 'encoded-word', and in the absence of - private agreements between sender and recipients of a message, it is - recommended that members of the ISO-8859-* series be used in - preference to other character sets. - -4. Encodings - - Initially, the legal values for "encoding" are "Q" and "B". These - encodings are described below. The "Q" encoding is recommended for - use when most of the characters to be encoded are in the ASCII - character set; otherwise, the "B" encoding should be used. - Nevertheless, a mail reader which claims to recognize 'encoded-word's - MUST be able to accept either encoding for any character set which it - supports. - - - -Moore Standards Track [Page 5] - -RFC 2047 Message Header Extensions November 1996 - - - Only a subset of the printable ASCII characters may be used in - 'encoded-text'. Space and tab characters are not allowed, so that - the beginning and end of an 'encoded-word' are obvious. The "?" - character is used within an 'encoded-word' to separate the various - portions of the 'encoded-word' from one another, and thus cannot - appear in the 'encoded-text' portion. Other characters are also - illegal in certain contexts. For example, an 'encoded-word' in a - 'phrase' preceding an address in a From header field may not contain - any of the "specials" defined in RFC 822. Finally, certain other - characters are disallowed in some contexts, to ensure reliability for - messages that pass through internetwork mail gateways. - - The "B" encoding automatically meets these requirements. The "Q" - encoding allows a wide range of printable characters to be used in - non-critical locations in the message header (e.g., Subject), with - fewer characters available for use in other locations. - -4.1. The "B" encoding - - The "B" encoding is identical to the "BASE64" encoding defined by RFC - 2045. - -4.2. The "Q" encoding - - The "Q" encoding is similar to the "Quoted-Printable" content- - transfer-encoding defined in RFC 2045. It is designed to allow text - containing mostly ASCII characters to be decipherable on an ASCII - terminal without decoding. - - (1) Any 8-bit value may be represented by a "=" followed by two - hexadecimal digits. For example, if the character set in use - were ISO-8859-1, the "=" character would thus be encoded as - "=3D", and a SPACE by "=20". (Upper case should be used for - hexadecimal digits "A" through "F".) - - (2) The 8-bit hexadecimal value 20 (e.g., ISO-8859-1 SPACE) may be - represented as "_" (underscore, ASCII 95.). (This character may - not pass through some internetwork mail gateways, but its use - will greatly enhance readability of "Q" encoded data with mail - readers that do not support this encoding.) Note that the "_" - always represents hexadecimal 20, even if the SPACE character - occupies a different code position in the character set in use. - - (3) 8-bit values which correspond to printable ASCII characters other - than "=", "?", and "_" (underscore), MAY be represented as those - characters. (But see section 5 for restrictions.) In - particular, SPACE and TAB MUST NOT be represented as themselves - within encoded words. - - - -Moore Standards Track [Page 6] - -RFC 2047 Message Header Extensions November 1996 - - -5. Use of encoded-words in message headers - - An 'encoded-word' may appear in a message header or body part header - according to the following rules: - -(1) An 'encoded-word' may replace a 'text' token (as defined by RFC 822) - in any Subject or Comments header field, any extension message - header field, or any MIME body part field for which the field body - is defined as '*text'. An 'encoded-word' may also appear in any - user-defined ("X-") message or body part header field. - - Ordinary ASCII text and 'encoded-word's may appear together in the - same header field. However, an 'encoded-word' that appears in a - header field defined as '*text' MUST be separated from any adjacent - 'encoded-word' or 'text' by 'linear-white-space'. - -(2) An 'encoded-word' may appear within a 'comment' delimited by "(" and - ")", i.e., wherever a 'ctext' is allowed. More precisely, the RFC - 822 ABNF definition for 'comment' is amended as follows: - - comment = "(" *(ctext / quoted-pair / comment / encoded-word) ")" - - A "Q"-encoded 'encoded-word' which appears in a 'comment' MUST NOT - contain the characters "(", ")" or " - 'encoded-word' that appears in a 'comment' MUST be separated from - any adjacent 'encoded-word' or 'ctext' by 'linear-white-space'. - - It is important to note that 'comment's are only recognized inside - "structured" field bodies. In fields whose bodies are defined as - '*text', "(" and ")" are treated as ordinary characters rather than - comment delimiters, and rule (1) of this section applies. (See RFC - 822, sections 3.1.2 and 3.1.3) - -(3) As a replacement for a 'word' entity within a 'phrase', for example, - one that precedes an address in a From, To, or Cc header. The ABNF - definition for 'phrase' from RFC 822 thus becomes: - - phrase = 1*( encoded-word / word ) - - In this case the set of characters that may be used in a "Q"-encoded - 'encoded-word' is restricted to: . An 'encoded-word' that appears within a - 'phrase' MUST be separated from any adjacent 'word', 'text' or - 'special' by 'linear-white-space'. - - - - - - -Moore Standards Track [Page 7] - -RFC 2047 Message Header Extensions November 1996 - - - These are the ONLY locations where an 'encoded-word' may appear. In - particular: - - + An 'encoded-word' MUST NOT appear in any portion of an 'addr-spec'. - - + An 'encoded-word' MUST NOT appear within a 'quoted-string'. - - + An 'encoded-word' MUST NOT be used in a Received header field. - - + An 'encoded-word' MUST NOT be used in parameter of a MIME - Content-Type or Content-Disposition field, or in any structured - field body except within a 'comment' or 'phrase'. - - The 'encoded-text' in an 'encoded-word' must be self-contained; - 'encoded-text' MUST NOT be continued from one 'encoded-word' to - another. This implies that the 'encoded-text' portion of a "B" - 'encoded-word' will be a multiple of 4 characters long; for a "Q" - 'encoded-word', any "=" character that appears in the 'encoded-text' - portion will be followed by two hexadecimal characters. - - Each 'encoded-word' MUST encode an integral number of octets. The - 'encoded-text' in each 'encoded-word' must be well-formed according - to the encoding specified; the 'encoded-text' may not be continued in - the next 'encoded-word'. (For example, "=?charset?Q?=?= - =?charset?Q?AB?=" would be illegal, because the two hex digits "AB" - must follow the "=" in the same 'encoded-word'.) - - Each 'encoded-word' MUST represent an integral number of characters. - A multi-octet character may not be split across adjacent 'encoded- - word's. - - Only printable and white space character data should be encoded using - this scheme. However, since these encoding schemes allow the - encoding of arbitrary octet values, mail readers that implement this - decoding should also ensure that display of the decoded data on the - recipient's terminal will not cause unwanted side-effects. - - Use of these methods to encode non-textual data (e.g., pictures or - sounds) is not defined by this memo. Use of 'encoded-word's to - represent strings of purely ASCII characters is allowed, but - discouraged. In rare cases it may be necessary to encode ordinary - text that looks like an 'encoded-word'. - - - - - - - - - -Moore Standards Track [Page 8] - -RFC 2047 Message Header Extensions November 1996 - - -6. Support of 'encoded-word's by mail readers - -6.1. Recognition of 'encoded-word's in message headers - - A mail reader must parse the message and body part headers according - to the rules in RFC 822 to correctly recognize 'encoded-word's. - - 'encoded-word's are to be recognized as follows: - - (1) Any message or body part header field defined as '*text', or any - user-defined header field, should be parsed as follows: Beginning - at the start of the field-body and immediately following each - occurrence of 'linear-white-space', each sequence of up to 75 - printable characters (not containing any 'linear-white-space') - should be examined to see if it is an 'encoded-word' according to - the syntax rules in section 2. Any other sequence of printable - characters should be treated as ordinary ASCII text. - - (2) Any header field not defined as '*text' should be parsed - according to the syntax rules for that header field. However, - any 'word' that appears within a 'phrase' should be treated as an - 'encoded-word' if it meets the syntax rules in section 2. - Otherwise it should be treated as an ordinary 'word'. - - (3) Within a 'comment', any sequence of up to 75 printable characters - (not containing 'linear-white-space'), that meets the syntax - rules in section 2, should be treated as an 'encoded-word'. - Otherwise it should be treated as normal comment text. - - (4) A MIME-Version header field is NOT required to be present for - 'encoded-word's to be interpreted according to this - specification. One reason for this is that the mail reader is - not expected to parse the entire message header before displaying - lines that may contain 'encoded-word's. - -6.2. Display of 'encoded-word's - - Any 'encoded-word's so recognized are decoded, and if possible, the - resulting unencoded text is displayed in the original character set. - - NOTE: Decoding and display of encoded-words occurs *after* a - structured field body is parsed into tokens. It is therefore - possible to hide 'special' characters in encoded-words which, when - displayed, will be indistinguishable from 'special' characters in the - surrounding text. For this and other reasons, it is NOT generally - possible to translate a message header containing 'encoded-word's to - an unencoded form which can be parsed by an RFC 822 mail reader. - - - - -Moore Standards Track [Page 9] - -RFC 2047 Message Header Extensions November 1996 - - - When displaying a particular header field that contains multiple - 'encoded-word's, any 'linear-white-space' that separates a pair of - adjacent 'encoded-word's is ignored. (This is to allow the use of - multiple 'encoded-word's to represent long strings of unencoded text, - without having to separate 'encoded-word's where spaces occur in the - unencoded text.) - - In the event other encodings are defined in the future, and the mail - reader does not support the encoding used, it may either (a) display - the 'encoded-word' as ordinary text, or (b) substitute an appropriate - message indicating that the text could not be decoded. - - If the mail reader does not support the character set used, it may - (a) display the 'encoded-word' as ordinary text (i.e., as it appears - in the header), (b) make a "best effort" to display using such - characters as are available, or (c) substitute an appropriate message - indicating that the decoded text could not be displayed. - - If the character set being used employs code-switching techniques, - display of the encoded text implicitly begins in "ASCII mode". In - addition, the mail reader must ensure that the output device is once - again in "ASCII mode" after the 'encoded-word' is displayed. - -6.3. Mail reader handling of incorrectly formed 'encoded-word's - - It is possible that an 'encoded-word' that is legal according to the - syntax defined in section 2, is incorrectly formed according to the - rules for the encoding being used. For example: - - (1) An 'encoded-word' which contains characters which are not legal - for a particular encoding (for example, a "-" in the "B" - encoding, or a SPACE or HTAB in either the "B" or "Q" encoding), - is incorrectly formed. - - (2) Any 'encoded-word' which encodes a non-integral number of - characters or octets is incorrectly formed. - - A mail reader need not attempt to display the text associated with an - 'encoded-word' that is incorrectly formed. However, a mail reader - MUST NOT prevent the display or handling of a message because an - 'encoded-word' is incorrectly formed. - -7. Conformance - - A mail composing program claiming compliance with this specification - MUST ensure that any string of non-white-space printable ASCII - characters within a '*text' or '*ctext' that begins with "=?" and - ends with "?=" be a valid 'encoded-word'. ("begins" means: at the - - - -Moore Standards Track [Page 10] - -RFC 2047 Message Header Extensions November 1996 - - - start of the field-body, immediately following 'linear-white-space', - or immediately following a "(" for an 'encoded-word' within '*ctext'; - "ends" means: at the end of the field-body, immediately preceding - 'linear-white-space', or immediately preceding a ")" for an - 'encoded-word' within '*ctext'.) In addition, any 'word' within a - 'phrase' that begins with "=?" and ends with "?=" must be a valid - 'encoded-word'. - - A mail reading program claiming compliance with this specification - must be able to distinguish 'encoded-word's from 'text', 'ctext', or - 'word's, according to the rules in section 6, anytime they appear in - appropriate places in message headers. It must support both the "B" - and "Q" encodings for any character set which it supports. The - program must be able to display the unencoded text if the character - set is "US-ASCII". For the ISO-8859-* character sets, the mail - reading program must at least be able to display the characters which - are also in the ASCII set. - -8. Examples - - The following are examples of message headers containing 'encoded- - word's: - - From: =?US-ASCII?Q?Keith_Moore?= - To: =?ISO-8859-1?Q?Keld_J=F8rn_Simonsen?= - CC: =?ISO-8859-1?Q?Andr=E9?= Pirard - Subject: =?ISO-8859-1?B?SWYgeW91IGNhbiByZWFkIHRoaXMgeW8=?= - =?ISO-8859-2?B?dSB1bmRlcnN0YW5kIHRoZSBleGFtcGxlLg==?= - - Note: In the first 'encoded-word' of the Subject field above, the - last "=" at the end of the 'encoded-text' is necessary because each - 'encoded-word' must be self-contained (the "=" character completes a - group of 4 base64 characters representing 2 octets). An additional - octet could have been encoded in the first 'encoded-word' (so that - the encoded-word would contain an exact multiple of 3 encoded - octets), except that the second 'encoded-word' uses a different - 'charset' than the first one. - - From: =?ISO-8859-1?Q?Olle_J=E4rnefors?= - To: ietf-822@dimacs.rutgers.edu, ojarnef@admin.kth.se - Subject: Time for ISO 10646? - - To: Dave Crocker - Cc: ietf-822@dimacs.rutgers.edu, paf@comsol.se - From: =?ISO-8859-1?Q?Patrik_F=E4ltstr=F6m?= - Subject: Re: RFC-HDR care and feeding - - - - - -Moore Standards Track [Page 11] - -RFC 2047 Message Header Extensions November 1996 - - - From: Nathaniel Borenstein - (=?iso-8859-8?b?7eXs+SDv4SDp7Oj08A==?=) - To: Greg Vaudreuil , Ned Freed - , Keith Moore - Subject: Test of new header generator - MIME-Version: 1.0 - Content-type: text/plain; charset=ISO-8859-1 - - The following examples illustrate how text containing 'encoded-word's - which appear in a structured field body. The rules are slightly - different for fields defined as '*text' because "(" and ")" are not - recognized as 'comment' delimiters. [Section 5, paragraph (1)]. - - In each of the following examples, if the same sequence were to occur - in a '*text' field, the "displayed as" form would NOT be treated as - encoded words, but be identical to the "encoded form". This is - because each of the encoded-words in the following examples is - adjacent to a "(" or ")" character. - - encoded form displayed as - --------------------------------------------------------------------- - (=?ISO-8859-1?Q?a?=) (a) - - (=?ISO-8859-1?Q?a?= b) (a b) - - Within a 'comment', white space MUST appear between an - 'encoded-word' and surrounding text. [Section 5, - paragraph (2)]. However, white space is not needed between - the initial "(" that begins the 'comment', and the - 'encoded-word'. - - - (=?ISO-8859-1?Q?a?= =?ISO-8859-1?Q?b?=) (ab) - - White space between adjacent 'encoded-word's is not - displayed. - - (=?ISO-8859-1?Q?a?= =?ISO-8859-1?Q?b?=) (ab) - - Even multiple SPACEs between 'encoded-word's are ignored - for the purpose of display. - - (=?ISO-8859-1?Q?a?= (ab) - =?ISO-8859-1?Q?b?=) - - Any amount of linear-space-white between 'encoded-word's, - even if it includes a CRLF followed by one or more SPACEs, - is ignored for the purposes of display. - - - -Moore Standards Track [Page 12] - -RFC 2047 Message Header Extensions November 1996 - - - (=?ISO-8859-1?Q?a_b?=) (a b) - - In order to cause a SPACE to be displayed within a portion - of encoded text, the SPACE MUST be encoded as part of the - 'encoded-word'. - - (=?ISO-8859-1?Q?a?= =?ISO-8859-2?Q?_b?=) (a b) - - In order to cause a SPACE to be displayed between two strings - of encoded text, the SPACE MAY be encoded as part of one of - the 'encoded-word's. - -9. References - - [RFC 822] Crocker, D., "Standard for the Format of ARPA Internet Text - Messages", STD 11, RFC 822, UDEL, August 1982. - - [RFC 2049] Borenstein, N., and N. Freed, "Multipurpose Internet Mail - Extensions (MIME) Part Five: Conformance Criteria and Examples", - RFC 2049, November 1996. - - [RFC 2045] Borenstein, N., and N. Freed, "Multipurpose Internet Mail - Extensions (MIME) Part One: Format of Internet Message Bodies", - RFC 2045, November 1996. - - [RFC 2046] Borenstein N., and N. Freed, "Multipurpose Internet Mail - Extensions (MIME) Part Two: Media Types", RFC 2046, - November 1996. - - [RFC 2048] Freed, N., Klensin, J., and J. Postel, "Multipurpose - Internet Mail Extensions (MIME) Part Four: Registration - Procedures", RFC 2048, November 1996. - - - - - - - - - - - - - - - - - - - -Moore Standards Track [Page 13] - -RFC 2047 Message Header Extensions November 1996 - - -10. Security Considerations - - Security issues are not discussed in this memo. - -11. Acknowledgements - - The author wishes to thank Nathaniel Borenstein, Issac Chan, Lutz - Donnerhacke, Paul Eggert, Ned Freed, Andreas M. Kirchwitz, Olle - Jarnefors, Mike Rosin, Yutaka Sato, Bart Schaefer, and Kazuhiko - Yamamoto, for their helpful advice, insightful comments, and - illuminating questions in response to earlier versions of this - specification. - -12. Author's Address - - Keith Moore - University of Tennessee - 107 Ayres Hall - Knoxville TN 37996-1301 - - EMail: moore@cs.utk.edu - - - - - - - - - - - - - - - - - - - - - - - - - - - - - - -Moore Standards Track [Page 14] - -RFC 2047 Message Header Extensions November 1996 - - -Appendix - changes since RFC 1522 (in no particular order) - - + explicitly state that the MIME-Version is not requried to use - 'encoded-word's. - - + add explicit note that SPACEs and TABs are not allowed within - 'encoded-word's, explaining that an 'encoded-word' must look like an - 'atom' to an RFC822 parser.values, to be precise). - - + add examples from Olle Jarnefors (thanks!) which illustrate how - encoded-words with adjacent linear-white-space are displayed. - - + explicitly list terms defined in RFC822 and referenced in this memo - - + fix transcription typos that caused one or two lines and a couple of - characters to disappear in the resulting text, due to nroff quirks. - - + clarify that encoded-words are allowed in '*text' fields in both - RFC822 headers and MIME body part headers, but NOT as parameter - values. - - + clarify the requirement to switch back to ASCII within the encoded - portion of an 'encoded-word', for any charset that uses code switching - sequences. - - + add a note about 'encoded-word's being delimited by "(" and ")" - within a comment, but not in a *text (how bizarre!). - - + fix the Andre Pirard example to get rid of the trailing "_" after - the =E9. (no longer needed post-1342). - - + clarification: an 'encoded-word' may appear immediately following - the initial "(" or immediately before the final ")" that delimits a - comment, not just adjacent to "(" and ")" *within* *ctext. - - + add a note to explain that a "B" 'encoded-word' will always have a - multiple of 4 characters in the 'encoded-text' portion. - - + add note about the "=" in the examples - - + note that processing of 'encoded-word's occurs *after* parsing, and - some of the implications thereof. - - + explicitly state that you can't expect to translate between - 1522 and either vanilla 822 or so-called "8-bit headers". - - + explicitly state that 'encoded-word's are not valid within a - 'quoted-string'. - - - -Moore Standards Track [Page 15] - -- cgit v1.2.3