diff options
Diffstat (limited to 'tools/verify-evolution-install.sh')
| -rwxr-xr-x | tools/verify-evolution-install.sh | 393 |
1 files changed, 393 insertions, 0 deletions
diff --git a/tools/verify-evolution-install.sh b/tools/verify-evolution-install.sh new file mode 100755 index 0000000000..f71cfd2e82 --- /dev/null +++ b/tools/verify-evolution-install.sh @@ -0,0 +1,393 @@ +#!/bin/sh +# +# Verifies that Evolution and all its supporting components +# are installed correctly. A tool to weed out common +# build problems. +# +# (C)2000 Helix Code, Inc. +# Author: Peter Williams <peterw@helixcode.com> +# +# This program is free software; you can redistribute it and/or +# modify it under the terms of the GNU Library General Public License +# as published by the Free Software Foundation; either version 2 of +# the License, or (at your option) any later version. +# +# This program is distributed in the hope that it will be useful, +# but WITHOUT ANY WARRANTY; without even the implied warranty of +# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the +# GNU Library General Public License for more details. +# +# You should have received a copy of the GNU Library General Public +# License along with this program; if not, write to the Free Software +# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA. +# + +problem() { + echo "I detected the following problem: $problem" + if test x"$rpmsystem" = xyes ; then + echo "Suggested solution via RPM: $rpmsolution" + fi + if test x"$debsystem" = xyes ; then + echo "Suggested solution via DEB: $debsolution" + fi + echo "Suggested solution via sources: $srcsolution" + if test x"$comment" != x ; then + echo "" + echo "$comment" + fi + exit 1 +} + +check_config() { + #bigname=$1 + #cfgname=$2 + #pkgname=$3 + eval $1=\${$1-\`which $2\`} + + eval val=\$$1 + if test ! -x $val ; then + problem="Cannot find $2 or it ($val) is not executable" + rpmsolution="Install or reinstall the '$3-devel' package" + debsolution="Install or reinstall the $3 development libraries." #FIXME + srcsolution="Get the latest release of $3 and install it." + comment="If you know that $3 is installed, try setting the +environment variable $1 to its location" + problem + fi +} + +check_prefix() { + #othercfg=$1 + #othername=$2 + + eval otherpfx=\`\$$1 --prefix\` + if test x"$otherpfx" != x"$gl_prefix" ; then + problem="gnome-libs and $2 do not share the same prefix" + rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome." + debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome." + srcsolution="Re-run 'configure' in $2's source directory with the flag '--prefix=$gl_prefix." + problem + fi +} + +check_sysconf() { + #othercfg=$1 + #othername=$2 + + eval othersysc=\`\$$1 --sysconfdir\` + if test x"$othersysc" != x"$gl_sysconf" ; then + problem="gnome-libs and $2 do not share the same sysconfdir" + rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome." + debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome." + srcsolution="Re-run 'configure' in $2's source directory with the flag '--sysconfdir=$gl_sysconf." + problem + fi +} + +check_oafinfo() { + #basename=$1 + #othername=$2 + + if test ! -f ${gl_datadir}/oaf/$1.oafinfo ; then + problem="$1.oafinfo isn't installed into Gnome's prefix" + rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome." + debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome." + srcsolution="Re-run 'configure' in $2's source directory with the flag '--datadir=$gl_datadir." + comment="Another likely cause of this problem would be a failed installation of $2. +You should check to see that the install succeeded." + problem + fi +} + +check_bin() { + #name=$1 + #othername=$2 + + if test ! -f ${gl_bindir}/$1 ; then + problem="The binary $1 isn't installed into Gnome's prefix" + rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome." + debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome." + srcsolution="Re-run 'configure' in $2's source directory with the flag '--bindir=$gl_bindir." + comment="Another likely cause of this problem would be a failed installation of $2. +You should check to see that the install succeeded." + problem + fi +} + +check_no_gnorba() { + #libs=$1 + #othername=$2 + + ping=`echo $1 |grep 'gnorba'` + + if test x"$ping" != x ; then + problem="$2 was built using Gnorba, not OAF" + rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome." + debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome." + srcsolution="Update $2 and re-run 'configure' in its source directory with the flag '--enable-oaf=yes." + problem + fi +} + +######################################## + +versionparse3() { + #inst_version=$1 + #reqd_version=$2 + #package=$3 + + inst_version=`versiongrab3 "$1"` + inst_major=`echo $inst_version |sed -e 's,\([0-9][0-9]*\)\..*\..*,\1,'` + inst_minor=`echo $inst_version |sed -e 's,.*\.\([0-9][0-9]*\)\..*,\1,'` + inst_micro=`echo $inst_version |sed -e 's,.*\..*\.\([0-9][0-9]*\),\1,'` + + reqd_version=`versiongrab3 "$2"` + reqd_major=`echo $reqd_version |sed -e 's,\([0-9][0-9]*\)\..*\..*,\1,'` + reqd_minor=`echo $reqd_version |sed -e 's,.*\.\([0-9][0-9]*\)\..*,\1,'` + reqd_micro=`echo $reqd_version |sed -e 's,.*\..*\.\([0-9][0-9]*\),\1,'` + + ok=yes + if test $inst_major -lt $reqd_major ; then + ok=no + elif test $inst_major -gt $reqd_major ; then + ok=yes + elif test $inst_minor -lt $reqd_minor; then + ok=no + elif test $inst_minor -gt $reqd_minor; then + ok=yes + elif test $inst_micro -lt $reqd_micro; then + ok=no + fi + + if test x$ok = xno ; then + problem="Package $3 is not new enough ($1 detected, $2 required)" + rpmsolution="Obtain a newer version and install it" + depsolution="Obtain a newer version and install it" + srcsolution="Obtain a newer version and install it" + comment="If you think you have a newer installation, make sure that the +package is not installed twice." + problem + fi +} + +versiongrab3() { + echo $1 |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*,\1,' +} + +check_module3() { + #$1=gnome-libs name + #$2=package + #$3=version + $GNOME_CONFIG --modversion $1 1>/dev/null 2>/dev/null </dev/null + if test x$? != x0 ; then + problem="Package $2 doesn't seem to be installed." + rpmsolution="Get and install the packages '$2' and '$2-devel'" + debsolution="Get and install the package $2 and its development libraries" #FIXME + srcsolution="Download the source and install the package $2" + comment="If you think the package is installed, check that its prefix is $gl_prefix -- +${1}Conf.sh should be installed into `$GNOME_CONFIG --libdir`" + problem + fi + + instversion=`$GNOME_CONFIG --modversion $1` + + #eew eew hacky + # gnome-vfs used to be versioned gnome-vfs-0.1, + # and gnome-vfs-0.2, but then they moved to three figs-- + # now it's gnome-vfs-0.2.0 + + if test $2 = gnome-vfs ; then + case "$instversion" in + gnome-vfs-0.1) + problem="Package gnome-vfs is not new enough (0.1 detected, $3 required)" + rpmsolution="Obtain a newer version and install it" + depsolution="Obtain a newer version and install it" + srcsolution="Obtain a newer version and install it" + comment="If you think you have a newer installation, make sure that the +package is not installed twice." + problem + ;; + gnome-vfs-0.2) + instversion="gnome-vfs-0.2.0" + ;; + *) + #nothing, version is ok + ;; + esac + fi + + versionparse3 "$instversion" "$3" "$2" +} + +######################################## + +versionparse2() { + #inst_version=$1 + #reqd_version=$2 + #package=$3 + + inst_version=`versiongrab2 "$1"` + inst_major=`echo $inst_version |sed -e 's,\([0-9][0-9]*\)\..*,\1,'` + inst_minor=`echo $inst_version |sed -e 's,.*\.\([0-9][0-9]*\),\1,'` + + reqd_version=`versiongrab2 "$2"` + reqd_major=`echo $reqd_version |sed -e 's,\([0-9][0-9]*\)\..*,\1,'` + reqd_minor=`echo $reqd_version |sed -e 's,.*\.\([0-9][0-9]*\),\1,'` + + ok=yes + if test $inst_major -lt $reqd_major ; then + ok=no + elif test $inst_major -gt $reqd_major ; then + ok=yes + elif test $inst_minor -lt $reqd_minor; then + ok=no + fi + + if test x$ok = xno ; then + problem="Package $3 is not new enough ($1 detected, $2 required)" + rpmsolution="Obtain a newer version and install it" + depsolution="Obtain a newer version and install it" + srcsolution="Obtain a newer version and install it" + comment="If you think you have a newer installation, make sure that the +package is not installed twice." + problem + fi +} + +versiongrab2() { + echo $1 |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\).*,\1,' +} + +check_module2() { + #$1=gnome-libs name + #$2=package + #$3=version + $GNOME_CONFIG --modversion $1 1>/dev/null 2>/dev/null </dev/null + if test x$? != x0 ; then + problem="Package $2 doesn't seem to be installed." + rpmsolution="Get and install the packages '$2' and '$2-devel'" + debsolution="Get and install the package $2 and its development libraries" #FIXME + srcsolution="Download the source and install the package $2" + comment="If you think the package is installed, check that its prefix is $gl_prefix -- +${1}Conf.sh should be installed into `$GNOME_CONFIG --libdir`" + problem + fi + + instversion=`$GNOME_CONFIG --modversion $1` + versionparse2 "$instversion" "$3" "$2" +} + +######################################## + +#prep +if test -d /var/lib/rpm ; then + rpmsystem=yes + RPM=${RPM_PROG-`which rpm`} + + $RPM --version 1>/dev/null 2>/dev/null </dev/null + if test x$? != x0 ; then + problem="The rpm executable ($RPM) does not seem to work." + rpmsolution="none, if rpm doesn't work." + debsolution="not applicable." + srcsolution="download and install rpm manually." + comment="If rpm really won't work then there is something wrong with your system." + problem + fi +else + rpmsystem=no +fi + +if test -d /var/lib/dpkg ; then + debsystem=yes + #FIXME: check if deb works +else + debsystem=no +fi + +if test x"$GNOME_PATH" != x ; then + PATH="$GNOME_PATH:$PATH" +fi + +#gnome-libs +check_config GNOME_CONFIG gnome-config gnome-libs + +gl_version=`$GNOME_CONFIG --version` # |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*,\1,'` +gl_sysconf=`$GNOME_CONFIG --sysconfdir` +gl_prefix=`$GNOME_CONFIG --prefix` +gl_datadir=`$GNOME_CONFIG --datadir` +gl_bindir=`$GNOME_CONFIG --bindir` + +versionparse3 "$gl_version" "1.0.59" "gnome-libs" + +#libunicode +check_config UNICODE_CONFIG unicode-config libunicode +check_prefix UNICODE_CONFIG libunicode +versionparse2 "`$UNICODE_CONFIG --version`" "0.4" libunicode + +#ORBit +check_config ORBIT_CONFIG orbit-config ORBit +check_prefix ORBIT_CONFIG ORBit + +#oaf +check_config OAF_CONFIG oaf-config oaf +check_prefix OAF_CONFIG oaf +versionparse3 "`$OAF_CONFIG --version`" "0.4.0" "oaf" +check_oafinfo oafd oaf +check_bin oafd + +#gconf +check_config GCONF_CONFIG gconf-config GConf +check_prefix GCONF_CONFIG GConf +versionparse2 "`$GCONF_CONFIG --version`" "0.5" GConf +check_oafinfo gconfd GConf +check_bin gconfd +check_no_gnorba "`$GCONF_CONFIG --libs`" GConf + +#gnome vfs +check_module3 vfs gnome-vfs "0.2.0" +check_no_gnorba "`$GNOME_CONFIG --libs vfs`" gnome-vfs + +#gnome print +check_module2 print gnome-print "0.20" +check_no_gnorba "`$GNOME_CONFIG --libs print`" gnome-print + +#bonobo +check_module2 bonobo bonobo "0.15" +check_oafinfo audio-ulaw bonobo +check_bin bonobo-audio-ulaw bonobo +check_no_gnorba "`$GNOME_CONFIG --libs bonobo`" bonobo + +bn_libs=`$GNOME_CONFIG --libs bonobo` + +ping=`echo $bn_libs |grep 'oaf'` + +if test x"$ping" = x ; then + problem="Bonobo was not compiled with oaf enabled." + rpmsolution="Reinstall the packages 'bonobo' and 'bonobo-devel'." + debsolution="Reinstall Bonobo and its development libraries." #FIXME + srcsolution="Re-run 'configure' in Bonobo's source directory with the flag '--enable-oaf=yes'." + problem +fi + +#gtkhtml +check_module2 gtkhtml GtkHTML "0.5" +check_oafinfo html-editor-control GtkHTML +check_bin html-editor-control GtkHTML +check_no_gnorba "`$GNOME_CONFIG --libs gtkhtml`" GtkHTML + +#evolution +check_oafinfo addressbook evolution +check_oafinfo calendar-control evolution +check_oafinfo evolution-mail evolution +check_oafinfo evolution-calendar evolution +check_oafinfo evolution-addressbook-select-names evolution +check_oafinfo wombat evolution +check_bin evolution-mail evolution +check_bin evolution-calendar evolution +check_bin evolution-addressbook evolution +check_bin wombat evolution +check_bin evolution evolution + +#done +echo "Your Gnome system appears to be properly set up. Enjoy Evolution!" +exit 0
\ No newline at end of file |