diff options
Diffstat (limited to 'libical')
| -rw-r--r-- | libical/libical-0.23a.tar.gz | bin | 541537 -> 0 bytes | |||
| -rwxr-xr-x | libical/libtool | 4272 |
2 files changed, 0 insertions, 4272 deletions
diff --git a/libical/libical-0.23a.tar.gz b/libical/libical-0.23a.tar.gz Binary files differdeleted file mode 100644 index f8675b6325..0000000000 --- a/libical/libical-0.23a.tar.gz +++ /dev/null diff --git a/libical/libtool b/libical/libtool deleted file mode 100755 index 2278d6d18b..0000000000 --- a/libical/libtool +++ /dev/null @@ -1,4272 +0,0 @@ -#! /bin/sh - -# libtool - Provide generalized library-building support services. -# Generated automatically by ltconfig (GNU libtool 1.3.4 (1.385.2.196 1999/12/07 21:47:57)) -# NOTE: Changes made to this file will be lost: look at ltconfig or ltmain.sh. -# -# Copyright (C) 1996-1999 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Sed that helps us avoid accidentally triggering echo(1) options like -n. -Xsed="sed -e s/^X//" - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test "X${CDPATH+set}" = Xset; then CDPATH=:; export CDPATH; fi - -### BEGIN LIBTOOL CONFIG -# Libtool was configured as follows, on host zugzwang.ximian.com: -# -# CC="gcc" CFLAGS="-g -O2" CPPFLAGS="" \ -# LD="/usr/bin/ld" LDFLAGS="" LIBS="" \ -# NM="/usr/bin/nm -B" RANLIB="ranlib" LN_S="ln -s" \ -# DLLTOOL="" OBJDUMP="" AS="" \ -# ./ltconfig --with-gcc --with-gnu-ld --no-verify ./ltmain.sh i686-pc-linux-gnu -# -# Compiler and other test output produced by ltconfig, useful for -# debugging ltconfig, is in ./config.log if it exists. - -# The version of ltconfig that generated this script. -LTCONFIG_VERSION="1.3.4" - -# Shell to use when invoking shell scripts. -SHELL="/bin/sh" - -# Whether or not to build shared libraries. -build_libtool_libs=yes - -# Whether or not to build static libraries. -build_old_libs=yes - -# Whether or not to optimize for fast installation. -fast_install=yes - -# The host system. -host_alias=i686-pc-linux-gnu -host=i686-pc-linux-gnu - -# An echo program that does not interpret backslashes. -echo="echo" - -# The archiver. -AR="ar" - -# The default C compiler. -CC="gcc" - -# The linker used to build libraries. -LD="/usr/bin/ld" - -# Whether we need hard or soft links. -LN_S="ln -s" - -# A BSD-compatible nm program. -NM="/usr/bin/nm -B" - -# Used on cygwin: DLL creation program. -DLLTOOL="dlltool" - -# Used on cygwin: object dumper. -OBJDUMP="objdump" - -# Used on cygwin: assembler. -AS="as" - -# The name of the directory that contains temporary libtool files. -objdir=.libs - -# How to create reloadable object files. -reload_flag=" -r" -reload_cmds="\$LD\$reload_flag -o \$output\$reload_objs" - -# How to pass a linker flag through the compiler. -wl="-Wl," - -# Object file suffix (normally "o"). -objext="o" - -# Old archive suffix (normally "a"). -libext="a" - -# Executable file suffix (normally ""). -exeext="" - -# Additional compiler flags for building library objects. -pic_flag=" -fPIC" - -# Does compiler simultaneously support -c and -o options? -compiler_c_o="yes" - -# Can we write directly to a .lo ? -compiler_o_lo="yes" - -# Must we lock files when doing compilation ? -need_locks="no" - -# Do we need the lib prefix for modules? -need_lib_prefix=no - -# Do we need a version for libraries? -need_version=no - -# Whether dlopen is supported. -dlopen=unknown - -# Whether dlopen of programs is supported. -dlopen_self=unknown - -# Whether dlopen of statically linked programs is supported. -dlopen_self_static=unknown - -# Compiler flag to prevent dynamic linking. -link_static_flag="-static" - -# Compiler flag to turn off builtin functions. -no_builtin_flag=" -fno-builtin -fno-rtti -fno-exceptions" - -# Compiler flag to allow reflexive dlopens. -export_dynamic_flag_spec="\${wl}--export-dynamic" - -# Compiler flag to generate shared objects directly from archives. -whole_archive_flag_spec="\${wl}--whole-archive\$convenience \${wl}--no-whole-archive" - -# Compiler flag to generate thread-safe objects. -thread_safe_flag_spec="" - -# Library versioning type. -version_type=linux - -# Format of library name prefix. -libname_spec="lib\$name" - -# List of archive names. First name is the real one, the rest are links. -# The last name is the one that the linker finds with -lNAME. -library_names_spec="\${libname}\${release}.so\$versuffix \${libname}\${release}.so\$major \$libname.so" - -# The coded name of the library, if different from the real name. -soname_spec="\${libname}\${release}.so\$major" - -# Commands used to build and install an old-style archive. -RANLIB="ranlib" -old_archive_cmds="\$AR cru \$oldlib\$oldobjs~\$RANLIB \$oldlib" -old_postinstall_cmds="\$RANLIB \$oldlib~chmod 644 \$oldlib" -old_postuninstall_cmds="" - -# Create an old-style archive from a shared archive. -old_archive_from_new_cmds="" - -# Commands used to build and install a shared archive. -archive_cmds="\$CC -shared \$libobjs \$deplibs \$linkopts \${wl}-soname \$wl\$soname -o \$lib" -archive_expsym_cmds="\$CC -shared \$libobjs \$deplibs \$linkopts \${wl}-soname \$wl\$soname \${wl}-retain-symbols-file \$wl\$export_symbols -o \$lib" -postinstall_cmds="" -postuninstall_cmds="" - -# Method to check whether dependent libraries are shared objects. -deplibs_check_method="file_magic ELF [0-9][0-9]*-bit [LM]SB (shared object|dynamic lib )" - -# Command to use when deplibs_check_method == file_magic. -file_magic_cmd="/usr/bin/file" - -# Flag that allows shared libraries with undefined symbols to be built. -allow_undefined_flag="" - -# Flag that forces no undefined symbols. -no_undefined_flag="" - -# Commands used to finish a libtool library installation in a directory. -finish_cmds="PATH=\\\"\\\$PATH:/sbin\\\" ldconfig -n \$libdir" - -# Same as above, but a single script fragment to be evaled but not shown. -finish_eval="" - -# Take the output of nm and produce a listing of raw symbols and C names. -global_symbol_pipe="sed -n -e 's/^.*[ ]\\([ABCDGISTW]\\)[ ][ ]*\\(\\)\\([_A-Za-z][_A-Za-z0-9]*\\)\$/\\1 \\2\\3 \\3/p'" - -# Transform the output of nm in a proper C declaration -global_symbol_to_cdecl="sed -n -e 's/^. .* \\(.*\\)\$/extern char \\1;/p'" - -# This is the shared library runtime path variable. -runpath_var=LD_RUN_PATH - -# This is the shared library path variable. -shlibpath_var=LD_LIBRARY_PATH - -# Is shlibpath searched before the hard-coded library search path? -shlibpath_overrides_runpath=no - -# How to hardcode a shared library path into an executable. -hardcode_action=immediate - -# Flag to hardcode $libdir into a binary during linking. -# This must work even if $libdir does not exist. -hardcode_libdir_flag_spec="\${wl}--rpath \${wl}\$libdir" - -# Whether we need a single -rpath flag with a separated argument. -hardcode_libdir_separator="" - -# Set to yes if using DIR/libNAME.so during linking hardcodes DIR into the -# resulting binary. -hardcode_direct=no - -# Set to yes if using the -LDIR flag during linking hardcodes DIR into the -# resulting binary. -hardcode_minus_L=no - -# Set to yes if using SHLIBPATH_VAR=DIR during linking hardcodes DIR into -# the resulting binary. -hardcode_shlibpath_var=unsupported - -# Compile-time system search path for libraries -sys_lib_search_path_spec="/lib /usr/lib /usr/local/lib" - -# Run-time system search path for libraries -sys_lib_dlsearch_path_spec="/lib /usr/lib" - -# Fix the shell variable $srcfile for the compiler. -fix_srcfile_path="" - -# Set to yes if exported symbols are required. -always_export_symbols=no - -# The commands to list exported symbols. -export_symbols_cmds="\$NM \$libobjs \$convenience | \$global_symbol_pipe | sed 's/.* //' | sort | uniq > \$export_symbols" - -# Symbols that should not be listed in the preloaded symbols. -exclude_expsyms="_GLOBAL_OFFSET_TABLE_" - -# Symbols that must always be exported. -include_expsyms="" - -### END LIBTOOL CONFIG - -# ltmain.sh - Provide generalized library-building support services. -# NOTE: Changing this file will not affect anything until you rerun ltconfig. -# -# Copyright (C) 1996-1999 Free Software Foundation, Inc. -# Originally by Gordon Matzigkeit <gord@gnu.ai.mit.edu>, 1996 -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, but -# WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU -# General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# -# As a special exception to the GNU General Public License, if you -# distribute this file as part of a program that contains a -# configuration script generated by Autoconf, you may include it under -# the same distribution terms that you use for the rest of that program. - -# Check that we have a working $echo. -if test "X$1" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift -elif test "X$1" = X--fallback-echo; then - # Avoid inline document here, it may be left over - : -elif test "X`($echo '\t') 2>/dev/null`" = 'X\t'; then - # Yippee, $echo works! - : -else - # Restart under the correct shell, and then maybe $echo will work. - exec $SHELL "$0" --no-reexec ${1+"$@"} -fi - -if test "X$1" = X--fallback-echo; then - # used as fallback echo - shift - cat <<EOF -$* -EOF - exit 0 -fi - -# The name of this program. -progname=`$echo "$0" | sed 's%^.*/%%'` -modename="$progname" - -# Constants. -PROGRAM=ltmain.sh -PACKAGE=libtool -VERSION=1.3.4 -TIMESTAMP=" (1.385.2.196 1999/12/07 21:47:57)" - -default_mode= -help="Try \`$progname --help' for more information." -magic="%%%MAGIC variable%%%" -mkdir="mkdir" -mv="mv -f" -rm="rm -f" - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='s/\([\\`\\"$\\\\]\)/\\\1/g' -SP2NL='tr \040 \012' -NL2SP='tr \015\012 \040\040' - -# NLS nuisances. -# Only set LANG and LC_ALL to C if already set. -# These must not be set unconditionally because not all systems understand -# e.g. LANG=C (notably SCO). -# We save the old values to restore during execute mode. -if test "${LC_ALL+set}" = set; then - save_LC_ALL="$LC_ALL"; LC_ALL=C; export LC_ALL -fi -if test "${LANG+set}" = set; then - save_LANG="$LANG"; LANG=C; export LANG -fi - -if test "$LTCONFIG_VERSION" != "$VERSION"; then - echo "$modename: ltconfig version \`$LTCONFIG_VERSION' does not match $PROGRAM version \`$VERSION'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -if test "$build_libtool_libs" != yes && test "$build_old_libs" != yes; then - echo "$modename: not configured to build any kind of library" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 -fi - -# Global variables. -mode=$default_mode -nonopt= -prev= -prevopt= -run= -show="$echo" -show_help= -execute_dlfiles= -lo2o="s/\\.lo\$/.${objext}/" -o2lo="s/\\.${objext}\$/.lo/" - -# Parse our command line options once, thoroughly. -while test $# -gt 0 -do - arg="$1" - shift - - case "$arg" in - -*=*) optarg=`$echo "X$arg" | $Xsed -e 's/[-_a-zA-Z0-9]*=//'` ;; - *) optarg= ;; - esac - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case "$prev" in - execute_dlfiles) - eval "$prev=\"\$$prev \$arg\"" - ;; - *) - eval "$prev=\$arg" - ;; - esac - - prev= - prevopt= - continue - fi - - # Have we seen a non-optional argument yet? - case "$arg" in - --help) - show_help=yes - ;; - - --version) - echo "$PROGRAM (GNU $PACKAGE) $VERSION$TIMESTAMP" - exit 0 - ;; - - --config) - sed -e '1,/^### BEGIN LIBTOOL CONFIG/d' -e '/^### END LIBTOOL CONFIG/,$d' $0 - exit 0 - ;; - - --debug) - echo "$progname: enabling shell trace mode" - set -x - ;; - - --dry-run | -n) - run=: - ;; - - --features) - echo "host: $host" - if test "$build_libtool_libs" = yes; then - echo "enable shared libraries" - else - echo "disable shared libraries" - fi - if test "$build_old_libs" = yes; then - echo "enable static libraries" - else - echo "disable static libraries" - fi - exit 0 - ;; - - --finish) mode="finish" ;; - - --mode) prevopt="--mode" prev=mode ;; - --mode=*) mode="$optarg" ;; - - --quiet | --silent) - show=: - ;; - - -dlopen) - prevopt="-dlopen" - prev=execute_dlfiles - ;; - - -*) - $echo "$modename: unrecognized option \`$arg'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - *) - nonopt="$arg" - break - ;; - esac -done - -if test -n "$prevopt"; then - $echo "$modename: option \`$prevopt' requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 -fi - -if test -z "$show_help"; then - - # Infer the operation mode. - if test -z "$mode"; then - case "$nonopt" in - *cc | *++ | gcc* | *-gcc*) - mode=link - for arg - do - case "$arg" in - -c) - mode=compile - break - ;; - esac - done - ;; - *db | *dbx | *strace | *truss) - mode=execute - ;; - *install*|cp|mv) - mode=install - ;; - *rm) - mode=uninstall - ;; - *) - # If we have no mode, but dlfiles were specified, then do execute mode. - test -n "$execute_dlfiles" && mode=execute - - # Just use the default operation mode. - if test -z "$mode"; then - if test -n "$nonopt"; then - $echo "$modename: warning: cannot infer operation mode from \`$nonopt'" 1>&2 - else - $echo "$modename: warning: cannot infer operation mode without MODE-ARGS" 1>&2 - fi - fi - ;; - esac - fi - - # Only execute mode is allowed to have -dlopen flags. - if test -n "$execute_dlfiles" && test "$mode" != execute; then - $echo "$modename: unrecognized option \`-dlopen'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Change the help message to a mode-specific one. - generic_help="$help" - help="Try \`$modename --help --mode=$mode' for more information." - - # These modes are in order of execution frequency so that they run quickly. - case "$mode" in - # libtool compile mode - compile) - modename="$modename: compile" - # Get the compilation command and the source file. - base_compile= - lastarg= - srcfile="$nonopt" - suppress_output= - - user_target=no - for arg - do - # Accept any command-line options. - case "$arg" in - -o) - if test "$user_target" != "no"; then - $echo "$modename: you cannot specify \`-o' more than once" 1>&2 - exit 1 - fi - user_target=next - ;; - - -static) - build_old_libs=yes - continue - ;; - esac - - case "$user_target" in - next) - # The next one is the -o target name - user_target=yes - continue - ;; - yes) - # We got the output file - user_target=set - libobj="$arg" - continue - ;; - esac - - # Accept the current argument as the source file. - lastarg="$srcfile" - srcfile="$arg" - - # Aesthetically quote the previous argument. - - # Backslashify any backslashes, double quotes, and dollar signs. - # These are the only characters that are still specially - # interpreted inside of double-quoted scrings. - lastarg=`$echo "X$lastarg" | $Xsed -e "$sed_quote_subst"` - - # Double-quote args containing other shell metacharacters. - # Many Bourne shells cannot handle close brackets correctly in scan - # sets, so we specify it separately. - case "$lastarg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - lastarg="\"$lastarg\"" - ;; - esac - - # Add the previous argument to base_compile. - if test -z "$base_compile"; then - base_compile="$lastarg" - else - base_compile="$base_compile $lastarg" - fi - done - - case "$user_target" in - set) - ;; - no) - # Get the name of the library object. - libobj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%'` - ;; - *) - $echo "$modename: you must specify a target with \`-o'" 1>&2 - exit 1 - ;; - esac - - # Recognize several different file suffixes. - # If the user specifies -o file.o, it is replaced with file.lo - xform='[cCFSfmso]' - case "$libobj" in - *.ada) xform=ada ;; - *.adb) xform=adb ;; - *.ads) xform=ads ;; - *.asm) xform=asm ;; - *.c++) xform=c++ ;; - *.cc) xform=cc ;; - *.cpp) xform=cpp ;; - *.cxx) xform=cxx ;; - *.f90) xform=f90 ;; - *.for) xform=for ;; - esac - - libobj=`$echo "X$libobj" | $Xsed -e "s/\.$xform$/.lo/"` - - case "$libobj" in - *.lo) obj=`$echo "X$libobj" | $Xsed -e "$lo2o"` ;; - *) - $echo "$modename: cannot determine name of library object from \`$libobj'" 1>&2 - exit 1 - ;; - esac - - if test -z "$base_compile"; then - $echo "$modename: you must specify a compilation command" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Delete any leftover library objects. - if test "$build_old_libs" = yes; then - removelist="$obj $libobj" - else - removelist="$libobj" - fi - - $run $rm $removelist - trap "$run $rm $removelist; exit 1" 1 2 15 - - # Calculate the filename of the output object if compiler does - # not support -o with -c - if test "$compiler_c_o" = no; then - output_obj=`$echo "X$srcfile" | $Xsed -e 's%^.*/%%' -e 's%\..*$%%'`.${objext} - lockfile="$output_obj.lock" - removelist="$removelist $output_obj $lockfile" - trap "$run $rm $removelist; exit 1" 1 2 15 - else - need_locks=no - lockfile= - fi - - # Lock this critical section if it is needed - # We use this script file to make the link, it avoids creating a new file - if test "$need_locks" = yes; then - until ln "$0" "$lockfile" 2>/dev/null; do - $show "Waiting for $lockfile to be removed" - sleep 2 - done - elif test "$need_locks" = warn; then - if test -f "$lockfile"; then - echo "\ -*** ERROR, $lockfile exists and contains: -`cat $lockfile 2>/dev/null` - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - echo $srcfile > "$lockfile" - fi - - if test -n "$fix_srcfile_path"; then - eval srcfile=\"$fix_srcfile_path\" - fi - - # Only build a PIC object if we are building libtool libraries. - if test "$build_libtool_libs" = yes; then - # Without this assignment, base_compile gets emptied. - fbsd_hideous_sh_bug=$base_compile - - # All platforms use -DPIC, to notify preprocessed assembler code. - command="$base_compile $srcfile $pic_flag -DPIC" - if test "$build_old_libs" = yes; then - lo_libobj="$libobj" - dir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$libobj"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - libobj="$dir/"`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - - if test -d "$dir"; then - $show "$rm $libobj" - $run $rm $libobj - else - $show "$mkdir $dir" - $run $mkdir $dir - status=$? - if test $status -ne 0 && test ! -d $dir; then - exit $status - fi - fi - fi - if test "$compiler_o_lo" = yes; then - output_obj="$libobj" - command="$command -o $output_obj" - elif test "$compiler_c_o" = yes; then - output_obj="$obj" - command="$command -o $output_obj" - fi - - $run $rm "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - test -n "$output_obj" && $run $rm $removelist - exit 1 - fi - - if test "$need_locks" = warn && - test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed, then go on to compile the next one - if test x"$output_obj" != x"$libobj"; then - $show "$mv $output_obj $libobj" - if $run $mv $output_obj $libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # If we have no pic_flag, then copy the object into place and finish. - if test -z "$pic_flag" && test "$build_old_libs" = yes; then - # Rename the .lo from within objdir to obj - if test -f $obj; then - $show $rm $obj - $run $rm $obj - fi - - $show "$mv $libobj $obj" - if $run $mv $libobj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$obj" | $Xsed -e "s%.*/%%"` - libobj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` - # Now arrange that obj and lo_libobj become the same file - $show "(cd $xdir && $LN_S $baseobj $libobj)" - if $run eval '(cd $xdir && $LN_S $baseobj $libobj)'; then - exit 0 - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Allow error messages only from the first compilation. - suppress_output=' >/dev/null 2>&1' - fi - - # Only build a position-dependent object if we build old libraries. - if test "$build_old_libs" = yes; then - command="$base_compile $srcfile" - if test "$compiler_c_o" = yes; then - command="$command -o $obj" - output_obj="$obj" - fi - - # Suppress compiler output if we already did a PIC compilation. - command="$command$suppress_output" - $run $rm "$output_obj" - $show "$command" - if $run eval "$command"; then : - else - $run $rm $removelist - exit 1 - fi - - if test "$need_locks" = warn && - test x"`cat $lockfile 2>/dev/null`" != x"$srcfile"; then - echo "\ -*** ERROR, $lockfile contains: -`cat $lockfile 2>/dev/null` - -but it should contain: -$srcfile - -This indicates that another process is trying to use the same -temporary object file, and libtool could not work around it because -your compiler does not support \`-c' and \`-o' together. If you -repeat this compilation, it may succeed, by chance, but you had better -avoid parallel builds (make -j) in this platform, or get a better -compiler." - - $run $rm $removelist - exit 1 - fi - - # Just move the object if needed - if test x"$output_obj" != x"$obj"; then - $show "$mv $output_obj $obj" - if $run $mv $output_obj $obj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - - # Create an invalid libtool object if no PIC, so that we do not - # accidentally link it into a program. - if test "$build_libtool_libs" != yes; then - $show "echo timestamp > $libobj" - $run eval "echo timestamp > \$libobj" || exit $? - else - # Move the .lo from within objdir - $show "$mv $libobj $lo_libobj" - if $run $mv $libobj $lo_libobj; then : - else - error=$? - $run $rm $removelist - exit $error - fi - fi - fi - - # Unlock the critical section if it was locked - if test "$need_locks" != no; then - $rm "$lockfile" - fi - - exit 0 - ;; - - # libtool link mode - link) - modename="$modename: link" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - # It is impossible to link a dll without this setting, and - # we shouldn't force the makefile maintainer to figure out - # which system we are compiling for in order to pass an extra - # flag for every libtool invokation. - # allow_undefined=no - - # FIXME: Unfortunately, there are problems with the above when trying - # to make a dll which has undefined symbols, in which case not - # even a static library is built. For now, we need to specify - # -no-undefined on the libtool link line when we can be certain - # that all symbols are satisfied, otherwise we get a static library. - allow_undefined=yes - - # This is a source program that is used to create dlls on Windows - # Don't remove nor modify the starting and closing comments -# /* ltdll.c starts here */ -# #define WIN32_LEAN_AND_MEAN -# #include <windows.h> -# #undef WIN32_LEAN_AND_MEAN -# #include <stdio.h> -# -# #ifndef __CYGWIN__ -# # ifdef __CYGWIN32__ -# # define __CYGWIN__ __CYGWIN32__ -# # endif -# #endif -# -# #ifdef __cplusplus -# extern "C" { -# #endif -# BOOL APIENTRY DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved); -# #ifdef __cplusplus -# } -# #endif -# -# #ifdef __CYGWIN__ -# #include <cygwin/cygwin_dll.h> -# DECLARE_CYGWIN_DLL( DllMain ); -# #endif -# HINSTANCE __hDllInstance_base; -# -# BOOL APIENTRY -# DllMain (HINSTANCE hInst, DWORD reason, LPVOID reserved) -# { -# __hDllInstance_base = hInst; -# return TRUE; -# } -# /* ltdll.c ends here */ - # This is a source program that is used to create import libraries - # on Windows for dlls which lack them. Don't remove nor modify the - # starting and closing comments -# /* impgen.c starts here */ -# /* Copyright (C) 1999 Free Software Foundation, Inc. -# -# This file is part of GNU libtool. -# -# This program is free software; you can redistribute it and/or modify -# it under the terms of the GNU General Public License as published by -# the Free Software Foundation; either version 2 of the License, or -# (at your option) any later version. -# -# This program is distributed in the hope that it will be useful, -# but WITHOUT ANY WARRANTY; without even the implied warranty of -# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the -# GNU General Public License for more details. -# -# You should have received a copy of the GNU General Public License -# along with this program; if not, write to the Free Software -# Foundation, Inc., 59 Temple Place - Suite 330, Boston, MA 02111-1307, USA. -# */ -# -# #include <stdio.h> /* for printf() */ -# #include <unistd.h> /* for open(), lseek(), read() */ -# #include <fcntl.h> /* for O_RDONLY, O_BINARY */ -# #include <string.h> /* for strdup() */ -# -# static unsigned int -# pe_get16 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[2]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 2); -# return b[0] + (b[1]<<8); -# } -# -# static unsigned int -# pe_get32 (fd, offset) -# int fd; -# int offset; -# { -# unsigned char b[4]; -# lseek (fd, offset, SEEK_SET); -# read (fd, b, 4); -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# static unsigned int -# pe_as32 (ptr) -# void *ptr; -# { -# unsigned char *b = ptr; -# return b[0] + (b[1]<<8) + (b[2]<<16) + (b[3]<<24); -# } -# -# int -# main (argc, argv) -# int argc; -# char *argv[]; -# { -# int dll; -# unsigned long pe_header_offset, opthdr_ofs, num_entries, i; -# unsigned long export_rva, export_size, nsections, secptr, expptr; -# unsigned long name_rvas, nexp; -# unsigned char *expdata, *erva; -# char *filename, *dll_name; -# -# filename = argv[1]; -# -# dll = open(filename, O_RDONLY|O_BINARY); -# if (!dll) -# return 1; -# -# dll_name = filename; -# -# for (i=0; filename[i]; i++) -# if (filename[i] == '/' || filename[i] == '\\' || filename[i] == ':') -# dll_name = filename + i +1; -# -# pe_header_offset = pe_get32 (dll, 0x3c); -# opthdr_ofs = pe_header_offset + 4 + 20; -# num_entries = pe_get32 (dll, opthdr_ofs + 92); -# -# if (num_entries < 1) /* no exports */ -# return 1; -# -# export_rva = pe_get32 (dll, opthdr_ofs + 96); -# export_size = pe_get32 (dll, opthdr_ofs + 100); -# nsections = pe_get16 (dll, pe_header_offset + 4 +2); -# secptr = (pe_header_offset + 4 + 20 + -# pe_get16 (dll, pe_header_offset + 4 + 16)); -# -# expptr = 0; -# for (i = 0; i < nsections; i++) -# { -# char sname[8]; -# unsigned long secptr1 = secptr + 40 * i; -# unsigned long vaddr = pe_get32 (dll, secptr1 + 12); -# unsigned long vsize = pe_get32 (dll, secptr1 + 16); -# unsigned long fptr = pe_get32 (dll, secptr1 + 20); -# lseek(dll, secptr1, SEEK_SET); -# read(dll, sname, 8); -# if (vaddr <= export_rva && vaddr+vsize > export_rva) -# { -# expptr = fptr + (export_rva - vaddr); -# if (export_rva + export_size > vaddr + vsize) -# export_size = vsize - (export_rva - vaddr); -# break; -# } -# } -# -# expdata = (unsigned char*)malloc(export_size); -# lseek (dll, expptr, SEEK_SET); -# read (dll, expdata, export_size); -# erva = expdata - export_rva; -# -# nexp = pe_as32 (expdata+24); -# name_rvas = pe_as32 (expdata+32); -# -# printf ("EXPORTS\n"); -# for (i = 0; i<nexp; i++) -# { -# unsigned long name_rva = pe_as32 (erva+name_rvas+i*4); -# printf ("\t%s @ %ld ;\n", erva+name_rva, 1+ i); -# } -# -# return 0; -# } -# /* impgen.c ends here */ - ;; - *) - allow_undefined=yes - ;; - esac - compile_command="$nonopt" - finalize_command="$nonopt" - - compile_rpath= - finalize_rpath= - compile_shlibpath= - finalize_shlibpath= - convenience= - old_convenience= - deplibs= - linkopts= - - if test -n "$shlibpath_var"; then - # get the directories listed in $shlibpath_var - eval lib_search_path=\`\$echo \"X \${$shlibpath_var}\" \| \$Xsed -e \'s/:/ /g\'\` - else - lib_search_path= - fi - # now prepend the system-specific ones - eval lib_search_path=\"$sys_lib_search_path_spec\$lib_search_path\" - eval sys_lib_dlsearch_path=\"$sys_lib_dlsearch_path_spec\" - - avoid_version=no - dlfiles= - dlprefiles= - dlself=no - export_dynamic=no - export_symbols= - export_symbols_regex= - generated= - libobjs= - link_against_libtool_libs= - ltlibs= - module=no - objs= - prefer_static_libs=no - preload=no - prev= - prevarg= - release= - rpath= - xrpath= - perm_rpath= - temp_rpath= - thread_safe=no - vinfo= - - # We need to know -static, to get the right output filenames. - for arg - do - case "$arg" in - -all-static | -static) - if test "X$arg" = "X-all-static"; then - if test "$build_libtool_libs" = yes && test -z "$link_static_flag"; then - $echo "$modename: warning: complete static linking is impossible in this configuration" 1>&2 - fi - if test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - else - if test -z "$pic_flag" && test -n "$link_static_flag"; then - dlopen_self=$dlopen_self_static - fi - fi - build_libtool_libs=no - build_old_libs=yes - prefer_static_libs=yes - break - ;; - esac - done - - # See if our shared archives depend on static archives. - test -n "$old_archive_from_new_cmds" && build_old_libs=yes - - # Go through the arguments, transforming them on the way. - while test $# -gt 0; do - arg="$1" - shift - - # If the previous option needs an argument, assign it. - if test -n "$prev"; then - case "$prev" in - output) - compile_command="$compile_command @OUTPUT@" - finalize_command="$finalize_command @OUTPUT@" - ;; - esac - - case "$prev" in - dlfiles|dlprefiles) - if test "$preload" = no; then - # Add the symbol object into the linking commands. - compile_command="$compile_command @SYMFILE@" - finalize_command="$finalize_command @SYMFILE@" - preload=yes - fi - case "$arg" in - *.la | *.lo) ;; # We handle these cases below. - force) - if test "$dlself" = no; then - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - self) - if test "$prev" = dlprefiles; then - dlself=yes - elif test "$prev" = dlfiles && test "$dlopen_self" != yes; then - dlself=yes - else - dlself=needless - export_dynamic=yes - fi - prev= - continue - ;; - *) - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - else - dlprefiles="$dlprefiles $arg" - fi - prev= - ;; - esac - ;; - expsyms) - export_symbols="$arg" - if test ! -f "$arg"; then - $echo "$modename: symbol file \`$arg' does not exist" - exit 1 - fi - prev= - continue - ;; - expsyms_regex) - export_symbols_regex="$arg" - prev= - continue - ;; - release) - release="-$arg" - prev= - continue - ;; - rpath | xrpath) - # We need an absolute path. - case "$arg" in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 - ;; - esac - if test "$prev" = rpath; then - case "$rpath " in - *" $arg "*) ;; - *) rpath="$rpath $arg" ;; - esac - else - case "$xrpath " in - *" $arg "*) ;; - *) xrpath="$xrpath $arg" ;; - esac - fi - prev= - continue - ;; - *) - eval "$prev=\"\$arg\"" - prev= - continue - ;; - esac - fi - - prevarg="$arg" - - case "$arg" in - -all-static) - if test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -allow-undefined) - # FIXME: remove this flag sometime in the future. - $echo "$modename: \`-allow-undefined' is deprecated because it is the default" 1>&2 - continue - ;; - - -avoid-version) - avoid_version=yes - continue - ;; - - -dlopen) - prev=dlfiles - continue - ;; - - -dlpreopen) - prev=dlprefiles - continue - ;; - - -export-dynamic) - export_dynamic=yes - continue - ;; - - -export-symbols | -export-symbols-regex) - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: not more than one -exported-symbols argument allowed" - exit 1 - fi - if test "X$arg" = "X-export-symbols"; then - prev=expsyms - else - prev=expsyms_regex - fi - continue - ;; - - -L*) - dir=`$echo "X$arg" | $Xsed -e 's/^-L//'` - # We need an absolute path. - case "$dir" in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - absdir="$dir" - fi - dir="$absdir" - ;; - esac - case " $deplibs " in - *" $arg "*) ;; - *) deplibs="$deplibs $arg";; - esac - case " $lib_search_path " in - *" $dir "*) ;; - *) lib_search_path="$lib_search_path $dir";; - esac - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - case ":$dllsearchpath:" in - ::) dllsearchpath="$dllsearchdir";; - *":$dllsearchdir:"*) ;; - *) dllsearchpath="$dllsearchpath:$dllsearchdir";; - esac - ;; - esac - ;; - - -l*) - if test "$arg" = "-lc"; then - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) - # These systems don't actually have c library (as such) - continue - ;; - esac - elif test "$arg" = "-lm"; then - case "$host" in - *-*-cygwin* | *-*-beos*) - # These systems don't actually have math library (as such) - continue - ;; - esac - fi - deplibs="$deplibs $arg" - ;; - - -module) - module=yes - continue - ;; - - -no-undefined) - allow_undefined=no - continue - ;; - - -o) prev=output ;; - - -release) - prev=release - continue - ;; - - -rpath) - prev=rpath - continue - ;; - - -R) - prev=xrpath - continue - ;; - - -R*) - dir=`$echo "X$arg" | $Xsed -e 's/^-R//'` - # We need an absolute path. - case "$dir" in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - $echo "$modename: only absolute run-paths are allowed" 1>&2 - exit 1 - ;; - esac - case "$xrpath " in - *" $dir "*) ;; - *) xrpath="$xrpath $dir" ;; - esac - continue - ;; - - -static) - # If we have no pic_flag, then this is the same as -all-static. - if test -z "$pic_flag" && test -n "$link_static_flag"; then - compile_command="$compile_command $link_static_flag" - finalize_command="$finalize_command $link_static_flag" - fi - continue - ;; - - -thread-safe) - thread_safe=yes - continue - ;; - - -version-info) - prev=vinfo - continue - ;; - - # Some other compiler flag. - -* | +*) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - ;; - - *.o | *.obj | *.a | *.lib) - # A standard object. - objs="$objs $arg" - ;; - - *.lo) - # A library object. - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test "$build_libtool_libs" = yes && test "$dlopen" = yes; then - prev= - continue - else - # If libtool objects are unsupported, then we need to preload. - prev=dlprefiles - fi - fi - - if test "$prev" = dlprefiles; then - # Preload the old-style object. - dlprefiles="$dlprefiles "`$echo "X$arg" | $Xsed -e "$lo2o"` - prev= - fi - libobjs="$libobjs $arg" - ;; - - *.la) - # A libtool-controlled library. - - dlname= - libdir= - library_names= - old_library= - - # Check to see that this really is a libtool archive. - if (sed -e '2q' $arg | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$arg' is not a valid libtool archive" 1>&2 - exit 1 - fi - - # If the library was installed with an old release of libtool, - # it will not redefine variable installed. - installed=yes - - # Read the .la file - # If there is no directory component, then add one. - case "$arg" in - */* | *\\*) . $arg ;; - *) . ./$arg ;; - esac - - # Get the name of the library we link against. - linklib= - for l in $old_library $library_names; do - linklib="$l" - done - - if test -z "$linklib"; then - $echo "$modename: cannot find name of link library for \`$arg'" 1>&2 - exit 1 - fi - - # Find the relevant object directory and library name. - name=`$echo "X$arg" | $Xsed -e 's%^.*/%%' -e 's/\.la$//' -e 's/^lib//'` - - if test "X$installed" = Xyes; then - dir="$libdir" - else - dir=`$echo "X$arg" | $Xsed -e 's%/[^/]*$%%'` - if test "X$dir" = "X$arg"; then - dir="$objdir" - else - dir="$dir/$objdir" - fi - fi - - if test -n "$dependency_libs"; then - # Extract -R and -L from dependency_libs - temp_deplibs= - for deplib in $dependency_libs; do - case "$deplib" in - -R*) temp_xrpath=`$echo "X$deplib" | $Xsed -e 's/^-R//'` - case " $rpath $xrpath " in - *" $temp_xrpath "*) ;; - *) xrpath="$xrpath $temp_xrpath";; - esac;; - -L*) case "$compile_command $temp_deplibs " in - *" $deplib "*) ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - temp_dir=`$echo "X$deplib" | $Xsed -e 's/^-L//'` - case " $lib_search_path " in - *" $temp_dir "*) ;; - *) lib_search_path="$lib_search_path $temp_dir";; - esac - ;; - *) temp_deplibs="$temp_deplibs $deplib";; - esac - done - dependency_libs="$temp_deplibs" - fi - - if test -z "$libdir"; then - # It is a libtool convenience library, so add in its objects. - convenience="$convenience $dir/$old_library" - old_convenience="$old_convenience $dir/$old_library" - deplibs="$deplibs$dependency_libs" - compile_command="$compile_command $dir/$old_library$dependency_libs" - finalize_command="$finalize_command $dir/$old_library$dependency_libs" - continue - fi - - # This library was specified with -dlopen. - if test "$prev" = dlfiles; then - dlfiles="$dlfiles $arg" - if test -z "$dlname" || test "$dlopen" != yes || test "$build_libtool_libs" = no; then - # If there is no dlname, no dlopen support or we're linking statically, - # we need to preload. - prev=dlprefiles - else - # We should not create a dependency on this library, but we - # may need any libraries it requires. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - prev= - continue - fi - fi - - # The library was specified with -dlpreopen. - if test "$prev" = dlprefiles; then - # Prefer using a static library (so that no silly _DYNAMIC symbols - # are required to link). - if test -n "$old_library"; then - dlprefiles="$dlprefiles $dir/$old_library" - else - dlprefiles="$dlprefiles $dir/$linklib" - fi - prev= - fi - - if test -n "$library_names" && - { test "$prefer_static_libs" = no || test -z "$old_library"; }; then - link_against_libtool_libs="$link_against_libtool_libs $arg" - if test -n "$shlibpath_var"; then - # Make sure the rpath contains only unique directories. - case "$temp_rpath " in - *" $dir "*) ;; - *) temp_rpath="$temp_rpath $dir" ;; - esac - fi - - # We need an absolute path. - case "$dir" in - [\\/] | [A-Za-z]:[\\/]*) absdir="$dir" ;; - *) - absdir=`cd "$dir" && pwd` - if test -z "$absdir"; then - $echo "$modename: warning: cannot determine absolute directory name of \`$dir'" 1>&2 - $echo "$modename: passing it literally to the linker, although it might fail" 1>&2 - absdir="$dir" - fi - ;; - esac - - # This is the magic to use -rpath. - # Skip directories that are in the system default run-time - # search path, unless they have been requested with -R. - case " $sys_lib_dlsearch_path " in - *" $absdir "*) ;; - *) - case "$compile_rpath " in - *" $absdir "*) ;; - *) compile_rpath="$compile_rpath $absdir" - esac - ;; - esac - - case " $sys_lib_dlsearch_path " in - *" $libdir "*) ;; - *) - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" - esac - ;; - esac - - lib_linked=yes - case "$hardcode_action" in - immediate | unsupported) - if test "$hardcode_direct" = no; then - compile_command="$compile_command $dir/$linklib" - deplibs="$deplibs $dir/$linklib" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2*) - dllsearchdir=`cd "$dir" && pwd || echo "$dir"` - if test -n "$dllsearchpath"; then - dllsearchpath="$dllsearchpath:$dllsearchdir" - else - dllsearchpath="$dllsearchdir" - fi - ;; - esac - elif test "$hardcode_minus_L" = no; then - case "$host" in - *-*-sunos*) - compile_shlibpath="$compile_shlibpath$dir:" - ;; - esac - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$dir -l$name" - elif test "$hardcode_shlibpath_var" = no; then - case ":$compile_shlibpath:" in - *":$dir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$dir:";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" - else - lib_linked=no - fi - ;; - - relink) - if test "$hardcode_direct" = yes; then - compile_command="$compile_command $absdir/$linklib" - deplibs="$deplibs $absdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$compile_command " in - *" -L$absdir "*) ;; - *) compile_command="$compile_command -L$absdir";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -L$absdir -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$compile_shlibpath:" in - *":$absdir:"*) ;; - *) compile_shlibpath="$compile_shlibpath$absdir:";; - esac - compile_command="$compile_command -l$name" - deplibs="$deplibs -l$name" - else - lib_linked=no - fi - ;; - - *) - lib_linked=no - ;; - esac - - if test "$lib_linked" != yes; then - $echo "$modename: configuration error: unsupported hardcode properties" - exit 1 - fi - - # Finalize command for both is simple: just hardcode it. - if test "$hardcode_direct" = yes; then - finalize_command="$finalize_command $libdir/$linklib" - elif test "$hardcode_minus_L" = yes; then - case "$finalize_command " in - *" -L$libdir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - elif test "$hardcode_shlibpath_var" = yes; then - case ":$finalize_shlibpath:" in - *":$libdir:"*) ;; - *) finalize_shlibpath="$finalize_shlibpath$libdir:";; - esac - finalize_command="$finalize_command -l$name" - else - # We cannot seem to hardcode it, guess we'll fake it. - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$libdir";; - esac - finalize_command="$finalize_command -l$name" - fi - else - # Transform directly to old archives if we don't build new libraries. - if test -n "$pic_flag" && test -z "$old_library"; then - $echo "$modename: cannot find static library for \`$arg'" 1>&2 - exit 1 - fi - - # Here we assume that one of hardcode_direct or hardcode_minus_L - # is not unsupported. This is valid on all known static and - # shared platforms. - if test "$hardcode_direct" != unsupported; then - test -n "$old_library" && linklib="$old_library" - compile_command="$compile_command $dir/$linklib" - finalize_command="$finalize_command $dir/$linklib" - else - case "$compile_command " in - *" -L$dir "*) ;; - *) compile_command="$compile_command -L$dir";; - esac - compile_command="$compile_command -l$name" - case "$finalize_command " in - *" -L$dir "*) ;; - *) finalize_command="$finalize_command -L$dir";; - esac - finalize_command="$finalize_command -l$name" - fi - fi - - # Add in any libraries that this one depends upon. - compile_command="$compile_command$dependency_libs" - finalize_command="$finalize_command$dependency_libs" - continue - ;; - - # Some other compiler argument. - *) - # Unknown arguments in both finalize_command and compile_command need - # to be aesthetically quoted because they are evaled later. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - ;; - esac - - # Now actually substitute the argument into the commands. - if test -n "$arg"; then - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - done - - if test -n "$prev"; then - $echo "$modename: the \`$prevarg' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test "$export_dynamic" = yes && test -n "$export_dynamic_flag_spec"; then - eval arg=\"$export_dynamic_flag_spec\" - compile_command="$compile_command $arg" - finalize_command="$finalize_command $arg" - fi - - oldlibs= - # calculate the name of the file, without its directory - outputname=`$echo "X$output" | $Xsed -e 's%^.*/%%'` - libobjs_save="$libobjs" - - case "$output" in - "") - $echo "$modename: you must specify an output file" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - - *.a | *.lib) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into archives" 1>&2 - exit 1 - fi - - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for archives" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for archives" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for archives" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for archives" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for archives" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for archives" 1>&2 - fi - - if test -n "$export_symbols" || test -n "$export_symbols_regex"; then - $echo "$modename: warning: \`-export-symbols' is ignored for archives" 1>&2 - fi - - # Now set the variables for building old libraries. - build_libtool_libs=no - oldlibs="$output" - ;; - - *.la) - # Make sure we only generate libraries of the form `libNAME.la'. - case "$outputname" in - lib*) - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//' -e 's/^lib//'` - eval libname=\"$libname_spec\" - ;; - *) - if test "$module" = no; then - $echo "$modename: libtool library \`$output' must begin with \`lib'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - if test "$need_lib_prefix" != no; then - # Add the "lib" prefix for modules if required - name=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - eval libname=\"$libname_spec\" - else - libname=`$echo "X$outputname" | $Xsed -e 's/\.la$//'` - fi - ;; - esac - - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - - if test -n "$objs"; then - $echo "$modename: cannot build libtool library \`$output' from non-libtool objects:$objs" 2>&1 - exit 1 - fi - - # How the heck are we supposed to write a wrapper for a shared library? - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link shared libraries into libtool libraries" 1>&2 - exit 1 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for libtool libraries" 1>&2 - fi - - set dummy $rpath - if test $# -gt 2; then - $echo "$modename: warning: ignoring multiple \`-rpath's for a libtool library" 1>&2 - fi - install_libdir="$2" - - oldlibs= - if test -z "$rpath"; then - if test "$build_libtool_libs" = yes; then - # Building a libtool convenience library. - libext=al - oldlibs="$output_objdir/$libname.$libext $oldlibs" - build_libtool_libs=convenience - build_old_libs=yes - fi - dependency_libs="$deplibs" - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for convenience libraries" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for convenience libraries" 1>&2 - fi - else - - # Parse the version information argument. - IFS="${IFS= }"; save_ifs="$IFS"; IFS=':' - set dummy $vinfo 0 0 0 - IFS="$save_ifs" - - if test -n "$8"; then - $echo "$modename: too many parameters to \`-version-info'" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - current="$2" - revision="$3" - age="$4" - - # Check that each of the things are valid numbers. - case "$current" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: CURRENT \`$current' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case "$revision" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: REVISION \`$revision' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - case "$age" in - 0 | [1-9] | [1-9][0-9]*) ;; - *) - $echo "$modename: AGE \`$age' is not a nonnegative integer" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - ;; - esac - - if test $age -gt $current; then - $echo "$modename: AGE \`$age' is greater than the current interface number \`$current'" 1>&2 - $echo "$modename: \`$vinfo' is not valid version information" 1>&2 - exit 1 - fi - - # Calculate the version variables. - major= - versuffix= - verstring= - case "$version_type" in - none) ;; - - irix) - major=`expr $current - $age + 1` - versuffix="$major.$revision" - verstring="sgi$major.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$revision - while test $loop != 0; do - iface=`expr $revision - $loop` - loop=`expr $loop - 1` - verstring="sgi$major.$iface:$verstring" - done - ;; - - linux) - major=.`expr $current - $age` - versuffix="$major.$age.$revision" - ;; - - osf) - major=`expr $current - $age` - versuffix=".$current.$age.$revision" - verstring="$current.$age.$revision" - - # Add in all the interfaces that we are compatible with. - loop=$age - while test $loop != 0; do - iface=`expr $current - $loop` - loop=`expr $loop - 1` - verstring="$verstring:${iface}.0" - done - - # Make executables depend on our current version. - verstring="$verstring:${current}.0" - ;; - - sunos) - major=".$current" - versuffix=".$current.$revision" - ;; - - freebsd-aout) - major=".$current" - versuffix=".$current.$revision"; - ;; - - freebsd-elf) - major=".$current" - versuffix=".$current"; - ;; - - windows) - # Like Linux, but with '-' rather than '.', since we only - # want one extension on Windows 95. - major=`expr $current - $age` - versuffix="-$major-$age-$revision" - ;; - - *) - $echo "$modename: unknown library version type \`$version_type'" 1>&2 - echo "Fatal configuration error. See the $PACKAGE docs for more information." 1>&2 - exit 1 - ;; - esac - - # Clear the version info if we defaulted, and they specified a release. - if test -z "$vinfo" && test -n "$release"; then - major= - verstring="0.0" - if test "$need_version" = no; then - versuffix= - else - versuffix=".0.0" - fi - fi - - # Remove version info from name if versioning should be avoided - if test "$avoid_version" = yes && test "$need_version" = no; then - major= - versuffix= - verstring="" - fi - - # Check to see if the archive will have undefined symbols. - if test "$allow_undefined" = yes; then - if test "$allow_undefined_flag" = unsupported; then - $echo "$modename: warning: undefined symbols not allowed in $host shared libraries" 1>&2 - build_libtool_libs=no - build_old_libs=yes - fi - else - # Don't allow undefined symbols. - allow_undefined_flag="$no_undefined_flag" - fi - - dependency_libs="$deplibs" - case "$host" in - *-*-cygwin* | *-*-mingw* | *-*-os2* | *-*-beos*) - # these systems don't actually have a c library (as such)! - ;; - *) - # Add libc to deplibs on all other systems. - deplibs="$deplibs -lc" - ;; - esac - fi - - # Create the output directory, or remove our outputs if we need to. - if test -d $output_objdir; then - $show "${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.*" - $run ${rm}r $output_objdir/$outputname $output_objdir/$libname.* $output_objdir/${libname}${release}.* - else - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi - fi - - # Now set the variables for building old libraries. - if test "$build_old_libs" = yes && test "$build_libtool_libs" != convenience ; then - oldlibs="$oldlibs $output_objdir/$libname.$libext" - - # Transform .lo files to .o files. - oldobjs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e "$lo2o" | $NL2SP` - fi - - if test "$build_libtool_libs" = yes; then - # Transform deplibs into only deplibs that can be linked in shared. - name_save=$name - libname_save=$libname - release_save=$release - versuffix_save=$versuffix - major_save=$major - # I'm not sure if I'm treating the release correctly. I think - # release should show up in the -l (ie -lgmp5) so we don't want to - # add it in twice. Is that correct? - release="" - versuffix="" - major="" - newdeplibs= - droppeddeps=no - case "$deplibs_check_method" in - pass_all) - # Don't check for shared/static. Everything works. - # This might be a little naive. We might want to check - # whether the library exists or not. But this is on - # osf3 & osf4 and I'm not really sure... Just - # implementing what was already the behaviour. - newdeplibs=$deplibs - ;; - test_compile) - # This code stresses the "libraries are programs" paradigm to its - # limits. Maybe even breaks it. We compile a program, linking it - # against the deplibs as a proxy for the library. Then we can check - # whether they linked in statically or dynamically with ldd. - $rm conftest.c - cat > conftest.c <<EOF - int main() { return 0; } -EOF - $rm conftest - $CC -o conftest conftest.c $deplibs - if test $? -eq 0 ; then - ldd_output=`ldd conftest` - for i in $deplibs; do - name="`expr $i : '-l\(.*\)'`" - # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - fi - else - newdeplibs="$newdeplibs $i" - fi - done - else - # Error occured in the first compile. Let's try to salvage the situation: - # Compile a seperate program for each library. - for i in $deplibs; do - name="`expr $i : '-l\(.*\)'`" - # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then - $rm conftest - $CC -o conftest conftest.c $i - # Did it work? - if test $? -eq 0 ; then - ldd_output=`ldd conftest` - libname=`eval \\$echo \"$libname_spec\"` - deplib_matches=`eval \\$echo \"$library_names_spec\"` - set dummy $deplib_matches - deplib_match=$2 - if test `expr "$ldd_output" : ".*$deplib_match"` -ne 0 ; then - newdeplibs="$newdeplibs $i" - else - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $i." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - fi - else - droppeddeps=yes - echo - echo "*** Warning! Library $i is needed by this library but I was not able to" - echo "*** make it link in! You will probably need to install it or some" - echo "*** library that it depends on before this library will be fully" - echo "*** functional. Installing it before continuing would be even better." - fi - else - newdeplibs="$newdeplibs $i" - fi - done - fi - ;; - file_magic*) - set dummy $deplibs_check_method - file_magic_regex="`expr \"$deplibs_check_method\" : \"$2 \(.*\)\"`" - for a_deplib in $deplibs; do - name="`expr $a_deplib : '-l\(.*\)'`" - # If $name is empty we are operating on a -L argument. - if test "$name" != "" ; then - libname=`eval \\$echo \"$libname_spec\"` - for i in $lib_search_path; do - potential_libs=`ls $i/$libname[.-]* 2>/dev/null` - for potent_lib in $potential_libs; do - # Follow soft links. - if ls -lLd "$potent_lib" 2>/dev/null \ - | grep " -> " >/dev/null; then - continue - fi - # The statement above tries to avoid entering an - # endless loop below, in case of cyclic links. - # We might still enter an endless loop, since a link - # loop can be closed while we follow links, - # but so what? - potlib="$potent_lib" - while test -h "$potlib" 2>/dev/null; do - potliblink=`ls -ld $potlib | sed 's/.* -> //'` - case "$potliblink" in - [\\/]* | [A-Za-z]:[\\/]*) potlib="$potliblink";; - *) potlib=`$echo "X$potlib" | $Xsed -e 's,[^/]*$,,'`"$potliblink";; - esac - done - if eval $file_magic_cmd \"\$potlib\" 2>/dev/null \ - | sed 10q \ - | egrep "$file_magic_regex" > /dev/null; then - newdeplibs="$newdeplibs $a_deplib" - a_deplib="" - break 2 - fi - done - done - if test -n "$a_deplib" ; then - droppeddeps=yes - echo - echo "*** Warning: This library needs some functionality provided by $a_deplib." - echo "*** I have the capability to make that library automatically link in when" - echo "*** you link to this library. But I can only do this if you have a" - echo "*** shared version of the library, which you do not appear to have." - fi - else - # Add a -L argument. - newdeplibs="$newdeplibs $a_deplib" - fi - done # Gone through all deplibs. - ;; - none | unknown | *) - newdeplibs="" - if $echo "X $deplibs" | $Xsed -e 's/ -lc$//' \ - -e 's/ -[LR][^ ]*//g' -e 's/[ ]//g' | - grep . >/dev/null; then - echo - if test "X$deplibs_check_method" = "Xnone"; then - echo "*** Warning: inter-library dependencies are not supported in this platform." - else - echo "*** Warning: inter-library dependencies are not known to be supported." - fi - echo "*** All declared inter-library dependencies are being dropped." - droppeddeps=yes - fi - ;; - esac - versuffix=$versuffix_save - major=$major_save - release=$release_save - libname=$libname_save - name=$name_save - - if test "$droppeddeps" = yes; then - if test "$module" = yes; then - echo - echo "*** Warning: libtool could not satisfy all declared inter-library" - echo "*** dependencies of module $libname. Therefore, libtool will create" - echo "*** a static module, that should work as long as the dlopening" - echo "*** application is linked with the -dlopen flag." - if test -z "$global_symbol_pipe"; then - echo - echo "*** However, this would only work if libtool was able to extract symbol" - echo "*** lists from a program, using \`nm' or equivalent, but libtool could" - echo "*** not find such a program. So, this module is probably useless." - echo "*** \`nm' from GNU binutils and a full rebuild may help." - fi - if test "$build_old_libs" = no; then - oldlibs="$output_objdir/$libname.$libext" - build_libtool_libs=module - build_old_libs=yes - else - build_libtool_libs=no - fi - else - echo "*** The inter-library dependencies that have been dropped here will be" - echo "*** automatically added whenever a program is linked with this library" - echo "*** or is declared to -dlopen it." - fi - fi - # Done checking deplibs! - deplibs=$newdeplibs - fi - - # All the library-specific variables (install_libdir is set above). - library_names= - old_library= - dlname= - - # Test again, we may have decided not to build it any more - if test "$build_libtool_libs" = yes; then - # Get the real and link names of the library. - eval library_names=\"$library_names_spec\" - set dummy $library_names - realname="$2" - shift; shift - - if test -n "$soname_spec"; then - eval soname=\"$soname_spec\" - else - soname="$realname" - fi - - lib="$output_objdir/$realname" - for link - do - linknames="$linknames $link" - done - - # Ensure that we have .o objects for linkers which dislike .lo - # (e.g. aix) in case we are running --disable-static - for obj in $libobjs; do - xdir=`$echo "X$obj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$obj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$obj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - if test ! -f $xdir/$oldobj; then - $show "(cd $xdir && ${LN_S} $baseobj $oldobj)" - $run eval '(cd $xdir && ${LN_S} $baseobj $oldobj)' || exit $? - fi - done - - # Use standard objects if they are pic - test -z "$pic_flag" && libobjs=`$echo "X$libobjs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - if test "$always_export_symbols" = yes || test -n "$export_symbols_regex"; then - $show "generating symbol list for \`$libname.la'" - export_symbols="$output_objdir/$libname.exp" - $run $rm $export_symbols - eval cmds=\"$export_symbols_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - if test -n "$export_symbols_regex"; then - $show "egrep -e \"$export_symbols_regex\" \"$export_symbols\" > \"${export_symbols}T\"" - $run eval 'egrep -e "$export_symbols_regex" "$export_symbols" > "${export_symbols}T"' - $show "$mv \"${export_symbols}T\" \"$export_symbols\"" - $run eval '$mv "${export_symbols}T" "$export_symbols"' - fi - fi - fi - - if test -n "$export_symbols" && test -n "$include_expsyms"; then - $run eval '$echo "X$include_expsyms" | $SP2NL >> "$export_symbols"' - fi - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval libobjs=\"\$libobjs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - for xlib in $convenience; do - # Extract the objects. - case "$xlib" in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - libobjs="$libobjs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done - fi - fi - - if test "$thread_safe" = yes && test -n "$thread_safe_flag_spec"; then - eval flag=\"$thread_safe_flag_spec\" - linkopts="$linkopts $flag" - fi - - # Do each of the archive commands. - if test -n "$export_symbols" && test -n "$archive_expsym_cmds"; then - eval cmds=\"$archive_expsym_cmds\" - else - eval cmds=\"$archive_cmds\" - fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Create links to the real library. - for linkname in $linknames; do - if test "$realname" != "$linkname"; then - $show "(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval '(cd $output_objdir && $rm $linkname && $LN_S $realname $linkname)' || exit $? - fi - done - - # If -module or -export-dynamic was specified, set the dlname. - if test "$module" = yes || test "$export_dynamic" = yes; then - # On all known operating systems, these are identical. - dlname="$soname" - fi - fi - ;; - - *.lo | *.o | *.obj) - if test -n "$link_against_libtool_libs"; then - $echo "$modename: error: cannot link libtool libraries into objects" 1>&2 - exit 1 - fi - - if test -n "$deplibs"; then - $echo "$modename: warning: \`-l' and \`-L' are ignored for objects" 1>&2 - fi - - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - $echo "$modename: warning: \`-dlopen' is ignored for objects" 1>&2 - fi - - if test -n "$rpath"; then - $echo "$modename: warning: \`-rpath' is ignored for objects" 1>&2 - fi - - if test -n "$xrpath"; then - $echo "$modename: warning: \`-R' is ignored for objects" 1>&2 - fi - - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for objects" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for objects" 1>&2 - fi - - case "$output" in - *.lo) - if test -n "$objs"; then - $echo "$modename: cannot build library object \`$output' from non-libtool objects" 1>&2 - exit 1 - fi - libobj="$output" - obj=`$echo "X$output" | $Xsed -e "$lo2o"` - ;; - *) - libobj= - obj="$output" - ;; - esac - - # Delete the old objects. - $run $rm $obj $libobj - - # Objects from convenience libraries. This assumes - # single-version convenience libraries. Whenever we create - # different ones for PIC/non-PIC, this we'll have to duplicate - # the extraction. - reload_conv_objs= - gentop= - # reload_cmds runs $LD directly, so let us get rid of - # -Wl from whole_archive_flag_spec - wl= - - if test -n "$convenience"; then - if test -n "$whole_archive_flag_spec"; then - eval reload_conv_objs=\"\$reload_objs $whole_archive_flag_spec\" - else - gentop="$output_objdir/${obj}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - for xlib in $convenience; do - # Extract the objects. - case "$xlib" in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - reload_conv_objs="$reload_objs "`find $xdir -name \*.o -print -o -name \*.lo -print | $NL2SP` - done - fi - fi - - # Create the old-style object. - reload_objs="$objs "`$echo "X$libobjs" | $SP2NL | $Xsed -e '/\.'${libext}$'/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP`" $reload_conv_objs" - - output="$obj" - eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - - # Exit if we aren't doing a library object file. - if test -z "$libobj"; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit 0 - fi - - if test "$build_libtool_libs" != yes; then - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - # Create an invalid libtool object if no PIC, so that we don't - # accidentally link it into a program. - $show "echo timestamp > $libobj" - $run eval "echo timestamp > $libobj" || exit $? - exit 0 - fi - - if test -n "$pic_flag"; then - # Only do commands if we really have different PIC objects. - reload_objs="$libobjs $reload_conv_objs" - output="$libobj" - eval cmds=\"$reload_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - else - # Just create a symlink. - $show $rm $libobj - $run $rm $libobj - xdir=`$echo "X$libobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$libobj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$libobj" | $Xsed -e 's%^.*/%%'` - oldobj=`$echo "X$baseobj" | $Xsed -e "$lo2o"` - $show "(cd $xdir && $LN_S $oldobj $baseobj)" - $run eval '(cd $xdir && $LN_S $oldobj $baseobj)' || exit $? - fi - - if test -n "$gentop"; then - $show "${rm}r $gentop" - $run ${rm}r $gentop - fi - - exit 0 - ;; - - # Anything else should be a program. - *) - if test -n "$vinfo"; then - $echo "$modename: warning: \`-version-info' is ignored for programs" 1>&2 - fi - - if test -n "$release"; then - $echo "$modename: warning: \`-release' is ignored for programs" 1>&2 - fi - - if test "$preload" = yes; then - if test "$dlopen" = unknown && test "$dlopen_self" = unknown && - test "$dlopen_self_static" = unknown; then - $echo "$modename: warning: \`AC_LIBTOOL_DLOPEN' not used. Assuming no dlopen support." - fi - fi - - if test -n "$rpath$xrpath"; then - # If the user specified any rpath flags, then add them. - for libdir in $rpath $xrpath; do - # This is the magic to use -rpath. - case "$compile_rpath " in - *" $libdir "*) ;; - *) compile_rpath="$compile_rpath $libdir" ;; - esac - case "$finalize_rpath " in - *" $libdir "*) ;; - *) finalize_rpath="$finalize_rpath $libdir" ;; - esac - done - fi - - # Now hardcode the library paths - rpath= - hardcode_libdirs= - for libdir in $compile_rpath $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$perm_rpath " in - *" $libdir "*) ;; - *) perm_rpath="$perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - compile_rpath="$rpath" - - rpath= - hardcode_libdirs= - for libdir in $finalize_rpath; do - if test -n "$hardcode_libdir_flag_spec"; then - if test -n "$hardcode_libdir_separator"; then - if test -z "$hardcode_libdirs"; then - hardcode_libdirs="$libdir" - else - # Just accumulate the unique libdirs. - case "$hardcode_libdir_separator$hardcode_libdirs$hardcode_libdir_separator" in - *"$hardcode_libdir_separator$libdir$hardcode_libdir_separator"*) - ;; - *) - hardcode_libdirs="$hardcode_libdirs$hardcode_libdir_separator$libdir" - ;; - esac - fi - else - eval flag=\"$hardcode_libdir_flag_spec\" - rpath="$rpath $flag" - fi - elif test -n "$runpath_var"; then - case "$finalize_perm_rpath " in - *" $libdir "*) ;; - *) finalize_perm_rpath="$finalize_perm_rpath $libdir" ;; - esac - fi - done - # Substitute the hardcoded libdirs into the rpath. - if test -n "$hardcode_libdir_separator" && - test -n "$hardcode_libdirs"; then - libdir="$hardcode_libdirs" - eval rpath=\" $hardcode_libdir_flag_spec\" - fi - finalize_rpath="$rpath" - - output_objdir=`$echo "X$output" | $Xsed -e 's%/[^/]*$%%'` - if test "X$output_objdir" = "X$output"; then - output_objdir="$objdir" - else - output_objdir="$output_objdir/$objdir" - fi - - # Create the binary in the object directory, then wrap it. - if test ! -d $output_objdir; then - $show "$mkdir $output_objdir" - $run $mkdir $output_objdir - status=$? - if test $status -ne 0 && test ! -d $output_objdir; then - exit $status - fi - fi - - if test -n "$libobjs" && test "$build_old_libs" = yes; then - # Transform all the library objects into standard objects. - compile_command=`$echo "X$compile_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - finalize_command=`$echo "X$finalize_command" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - fi - - dlsyms= - if test -n "$dlfiles$dlprefiles" || test "$dlself" != no; then - if test -n "$NM" && test -n "$global_symbol_pipe"; then - dlsyms="${outputname}S.c" - else - $echo "$modename: not configured to extract global symbols from dlpreopened files" 1>&2 - fi - fi - - if test -n "$dlsyms"; then - case "$dlsyms" in - "") ;; - *.c) - # Discover the nlist of each of the dlfiles. - nlist="$output_objdir/${outputname}.nm" - - $show "$rm $nlist ${nlist}S ${nlist}T" - $run $rm "$nlist" "${nlist}S" "${nlist}T" - - # Parse the name list into a source file. - $show "creating $output_objdir/$dlsyms" - - test -z "$run" && $echo > "$output_objdir/$dlsyms" "\ -/* $dlsyms - symbol resolution table for \`$outputname' dlsym emulation. */ -/* Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP */ - -#ifdef __cplusplus -extern \"C\" { -#endif - -/* Prevent the only kind of declaration conflicts we can make. */ -#define lt_preloaded_symbols some_other_symbol - -/* External symbol declarations for the compiler. */\ -" - - if test "$dlself" = yes; then - $show "generating symbol list for \`$output'" - - test -z "$run" && $echo ': @PROGRAM@ ' > "$nlist" - - # Add our own program objects to the symbol list. - progfiles=`$echo "X$objs" | $SP2NL | $Xsed -e "$lo2o" | $NL2SP` - for arg in $progfiles; do - $show "extracting global C symbols from \`$arg'" - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -n "$exclude_expsyms"; then - $run eval 'egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - if test -n "$export_symbols_regex"; then - $run eval 'egrep -e "$export_symbols_regex" "$nlist" > "$nlist"T' - $run eval '$mv "$nlist"T "$nlist"' - fi - - # Prepare the list of exported symbols - if test -z "$export_symbols"; then - export_symbols="$output_objdir/$output.exp" - $run $rm $export_symbols - $run eval "sed -n -e '/^: @PROGRAM@$/d' -e 's/^.* \(.*\)$/\1/p' "'< "$nlist" > "$export_symbols"' - else - $run eval "sed -e 's/\([][.*^$]\)/\\\1/g' -e 's/^/ /' -e 's/$/$/'"' < "$export_symbols" > "$output_objdir/$output.exp"' - $run eval 'grep -f "$output_objdir/$output.exp" < "$nlist" > "$nlist"T' - $run eval 'mv "$nlist"T "$nlist"' - fi - fi - - for arg in $dlprefiles; do - $show "extracting global C symbols from \`$arg'" - name=`echo "$arg" | sed -e 's%^.*/%%'` - $run eval 'echo ": $name " >> "$nlist"' - $run eval "$NM $arg | $global_symbol_pipe >> '$nlist'" - done - - if test -z "$run"; then - # Make sure we have at least an empty file. - test -f "$nlist" || : > "$nlist" - - if test -n "$exclude_expsyms"; then - egrep -v " ($exclude_expsyms)$" "$nlist" > "$nlist"T - $mv "$nlist"T "$nlist" - fi - - # Try sorting and uniquifying the output. - if grep -v "^: " < "$nlist" | sort +2 | uniq > "$nlist"S; then - : - else - grep -v "^: " < "$nlist" > "$nlist"S - fi - - if test -f "$nlist"S; then - eval "$global_symbol_to_cdecl"' < "$nlist"S >> "$output_objdir/$dlsyms"' - else - echo '/* NONE */' >> "$output_objdir/$dlsyms" - fi - - $echo >> "$output_objdir/$dlsyms" "\ - -#undef lt_preloaded_symbols - -#if defined (__STDC__) && __STDC__ -# define lt_ptr_t void * -#else -# define lt_ptr_t char * -# define const -#endif - -/* The mapping between symbol names and symbols. */ -const struct { - const char *name; - lt_ptr_t address; -} -lt_preloaded_symbols[] = -{\ -" - - sed -n -e 's/^: \([^ ]*\) $/ {\"\1\", (lt_ptr_t) 0},/p' \ - -e 's/^. \([^ ]*\) \([^ ]*\)$/ {"\2", (lt_ptr_t) \&\2},/p' \ - < "$nlist" >> "$output_objdir/$dlsyms" - - $echo >> "$output_objdir/$dlsyms" "\ - {0, (lt_ptr_t) 0} -}; - -/* This works around a problem in FreeBSD linker */ -#ifdef FREEBSD_WORKAROUND -static const void *lt_preloaded_setup() { - return lt_preloaded_symbols; -} -#endif - -#ifdef __cplusplus -} -#endif\ -" - fi - - pic_flag_for_symtable= - case "$host" in - # compiling the symbol table file with pic_flag works around - # a FreeBSD bug that causes programs to crash when -lm is - # linked before any other PIC object. But we must not use - # pic_flag when linking with -static. The problem exists in - # FreeBSD 2.2.6 and is fixed in FreeBSD 3.1. - *-*-freebsd2*|*-*-freebsd3.0*|*-*-freebsdelf3.0*)
- case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC -DFREEBSD_WORKAROUND";; - esac;; - *-*-hpux*) - case "$compile_command " in - *" -static "*) ;; - *) pic_flag_for_symtable=" $pic_flag -DPIC";; - esac - esac - - # Now compile the dynamic symbol file. - $show "(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable \"$dlsyms\")" - $run eval '(cd $output_objdir && $CC -c$no_builtin_flag$pic_flag_for_symtable "$dlsyms")' || exit $? - - # Clean up the generated files. - $show "$rm $output_objdir/$dlsyms $nlist ${nlist}S ${nlist}T" - $run $rm "$output_objdir/$dlsyms" "$nlist" "${nlist}S" "${nlist}T" - - # Transform the symbol file into the correct name. - compile_command=`$echo "X$compile_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s%@SYMFILE@%$output_objdir/${outputname}S.${objext}%"` - ;; - *) - $echo "$modename: unknown suffix for \`$dlsyms'" 1>&2 - exit 1 - ;; - esac - else - # We keep going just in case the user didn't refer to - # lt_preloaded_symbols. The linker will fail if global_symbol_pipe - # really was required. - - # Nullify the symbol file. - compile_command=`$echo "X$compile_command" | $Xsed -e "s% @SYMFILE@%%"` - finalize_command=`$echo "X$finalize_command" | $Xsed -e "s% @SYMFILE@%%"` - fi - - if test -z "$link_against_libtool_libs" || test "$build_libtool_libs" != yes; then - # Replace the output file specification. - compile_command=`$echo "X$compile_command" | $Xsed -e 's%@OUTPUT@%'"$output"'%g'` - link_command="$compile_command$compile_rpath" - - # We have no uninstalled library dependencies, so finalize right now. - $show "$link_command" - $run eval "$link_command" - status=$? - - # Delete the generated files. - if test -n "$dlsyms"; then - $show "$rm $output_objdir/${outputname}S.${objext}" - $run $rm "$output_objdir/${outputname}S.${objext}" - fi - - exit $status - fi - - if test -n "$shlibpath_var"; then - # We should set the shlibpath_var - rpath= - for dir in $temp_rpath; do - case "$dir" in - [\\/]* | [A-Za-z]:[\\/]*) - # Absolute path. - rpath="$rpath$dir:" - ;; - *) - # Relative path: add a thisdir entry. - rpath="$rpath\$thisdir/$dir:" - ;; - esac - done - temp_rpath="$rpath" - fi - - if test -n "$compile_shlibpath$finalize_shlibpath"; then - compile_command="$shlibpath_var=\"$compile_shlibpath$finalize_shlibpath\$$shlibpath_var\" $compile_command" - fi - if test -n "$finalize_shlibpath"; then - finalize_command="$shlibpath_var=\"$finalize_shlibpath\$$shlibpath_var\" $finalize_command" - fi - - compile_var= - finalize_var= - if test -n "$runpath_var"; then - if test -n "$perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $perm_rpath; do - rpath="$rpath$dir:" - done - compile_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - if test -n "$finalize_perm_rpath"; then - # We should set the runpath_var. - rpath= - for dir in $finalize_perm_rpath; do - rpath="$rpath$dir:" - done - finalize_var="$runpath_var=\"$rpath\$$runpath_var\" " - fi - fi - - if test "$hardcode_action" = relink; then - # Fast installation is not supported - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - - $echo "$modename: warning: this platform does not like uninstalled shared libraries" 1>&2 - $echo "$modename: \`$output' will be relinked during installation" 1>&2 - else - if test "$fast_install" != no; then - link_command="$finalize_var$compile_command$finalize_rpath" - if test "$fast_install" = yes; then - relink_command=`$echo "X$compile_var$compile_command$compile_rpath" | $Xsed -e 's%@OUTPUT@%\$progdir/\$file%g'` - else - # fast_install is set to needless - relink_command= - fi - else - link_command="$compile_var$compile_command$compile_rpath" - relink_command="$finalize_var$finalize_command$finalize_rpath" - fi - fi - - # Replace the output file specification. - link_command=`$echo "X$link_command" | $Xsed -e 's%@OUTPUT@%'"$output_objdir/$outputname"'%g'` - - # Delete the old output files. - $run $rm $output $output_objdir/$outputname $output_objdir/lt-$outputname - - $show "$link_command" - $run eval "$link_command" || exit $? - - # Now create the wrapper script. - $show "creating $output" - - # Quote the relink command for shipping. - if test -n "$relink_command"; then - relink_command=`$echo "X$relink_command" | $Xsed -e "$sed_quote_subst"` - fi - - # Quote $echo for shipping. - if test "X$echo" = "X$SHELL $0 --fallback-echo"; then - case "$0" in - [\\/]* | [A-Za-z]:[\\/]*) qecho="$SHELL $0 --fallback-echo";; - *) qecho="$SHELL `pwd`/$0 --fallback-echo";; - esac - qecho=`$echo "X$qecho" | $Xsed -e "$sed_quote_subst"` - else - qecho=`$echo "X$echo" | $Xsed -e "$sed_quote_subst"` - fi - - # Only actually do things if our run command is non-null. - if test -z "$run"; then - # win32 will think the script is a binary if it has - # a .exe suffix, so we strip it off here. - case $output in - *.exe) output=`echo $output|sed 's,.exe$,,'` ;; - esac - $rm $output - trap "$rm $output; exit 1" 1 2 15 - - $echo > $output "\ -#! $SHELL - -# $output - temporary wrapper script for $objdir/$outputname -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# The $output program cannot be directly executed until all the libtool -# libraries that it depends on are installed. -# -# This wrapper script should never be moved out of the build directory. -# If it is, it will not operate correctly. - -# Sed substitution that helps us do robust quoting. It backslashifies -# metacharacters that are still active within double-quoted strings. -Xsed='sed -e 1s/^X//' -sed_quote_subst='$sed_quote_subst' - -# The HP-UX ksh and POSIX shell print the target directory to stdout -# if CDPATH is set. -if test \"\${CDPATH+set}\" = set; then CDPATH=:; export CDPATH; fi - -relink_command=\"$relink_command\" - -# This environment variable determines our operation mode. -if test \"\$libtool_install_magic\" = \"$magic\"; then - # install mode needs the following variable: - link_against_libtool_libs='$link_against_libtool_libs' -else - # When we are sourced in execute mode, \$file and \$echo are already set. - if test \"\$libtool_execute_magic\" != \"$magic\"; then - echo=\"$qecho\" - file=\"\$0\" - # Make sure echo works. - if test \"X\$1\" = X--no-reexec; then - # Discard the --no-reexec flag, and continue. - shift - elif test \"X\`(\$echo '\t') 2>/dev/null\`\" = 'X\t'; then - # Yippee, \$echo works! - : - else - # Restart under the correct shell, and then maybe \$echo will work. - exec $SHELL \"\$0\" --no-reexec \${1+\"\$@\"} - fi - fi\ -" - $echo >> $output "\ - - # Find the directory that this script lives in. - thisdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*$%%'\` - test \"x\$thisdir\" = \"x\$file\" && thisdir=. - - # Follow symbolic links until we get to the real thisdir. - file=\`ls -ld \"\$file\" | sed -n 's/.*-> //p'\` - while test -n \"\$file\"; do - destdir=\`\$echo \"X\$file\" | \$Xsed -e 's%/[^/]*\$%%'\` - - # If there was a directory component, then change thisdir. - if test \"x\$destdir\" != \"x\$file\"; then - case \"\$destdir\" in - [\\/]* | [A-Za-z]:[\\/]*) thisdir=\"\$destdir\" ;; - *) thisdir=\"\$thisdir/\$destdir\" ;; - esac - fi - - file=\`\$echo \"X\$file\" | \$Xsed -e 's%^.*/%%'\` - file=\`ls -ld \"\$thisdir/\$file\" | sed -n 's/.*-> //p'\` - done - - # Try to get the absolute directory name. - absdir=\`cd \"\$thisdir\" && pwd\` - test -n \"\$absdir\" && thisdir=\"\$absdir\" -" - - if test "$fast_install" = yes; then - echo >> $output "\ - program=lt-'$outputname' - progdir=\"\$thisdir/$objdir\" - - if test ! -f \"\$progdir/\$program\" || \\ - { file=\`ls -1dt \"\$progdir/\$program\" \"\$progdir/../\$program\" 2>/dev/null | sed 1q\`; \\ - test \"X\$file\" != \"X\$progdir/\$program\"; }; then - - file=\"\$\$-\$program\" - - if test ! -d \"\$progdir\"; then - $mkdir \"\$progdir\" - else - $rm \"\$progdir/\$file\" - fi" - - echo >> $output "\ - - # relink executable if necessary - if test -n \"\$relink_command\"; then - if (cd \"\$thisdir\" && eval \$relink_command); then : - else - $rm \"\$progdir/\$file\" - exit 1 - fi - fi - - $mv \"\$progdir/\$file\" \"\$progdir/\$program\" 2>/dev/null || - { $rm \"\$progdir/\$program\"; - $mv \"\$progdir/\$file\" \"\$progdir/\$program\"; } - $rm \"\$progdir/\$file\" - fi" - else - echo >> $output "\ - program='$outputname' - progdir=\"\$thisdir/$objdir\" -" - fi - - echo >> $output "\ - - if test -f \"\$progdir/\$program\"; then" - - # Export our shlibpath_var if we have one. - if test "$shlibpath_overrides_runpath" = yes && test -n "$shlibpath_var" && test -n "$temp_rpath"; then - $echo >> $output "\ - # Add our own library path to $shlibpath_var - $shlibpath_var=\"$temp_rpath\$$shlibpath_var\" - - # Some systems cannot cope with colon-terminated $shlibpath_var - # The second colon is a workaround for a bug in BeOS R4 sed - $shlibpath_var=\`\$echo \"X\$$shlibpath_var\" | \$Xsed -e 's/::*\$//'\` - - export $shlibpath_var -" - fi - - # fixup the dll searchpath if we need to. - if test -n "$dllsearchpath"; then - $echo >> $output "\ - # Add the dll search path components to the executable PATH - PATH=$dllsearchpath:\$PATH -" - fi - - $echo >> $output "\ - if test \"\$libtool_execute_magic\" != \"$magic\"; then - # Run the actual program with our arguments. -" - case $host in - *-*-cygwin* | *-*-mingw | *-*-os2*) - # win32 systems need to use the prog path for dll - # lookup to work - $echo >> $output "\ - exec \$progdir\\\\\$program \${1+\"\$@\"} -" - ;; - *) - $echo >> $output "\ - # Export the path to the program. - PATH=\"\$progdir:\$PATH\" - export PATH - - exec \$program \${1+\"\$@\"} -" - ;; - esac - $echo >> $output "\ - \$echo \"\$0: cannot exec \$program \${1+\"\$@\"}\" - exit 1 - fi - else - # The program doesn't exist. - \$echo \"\$0: error: \$progdir/\$program does not exist\" 1>&2 - \$echo \"This script is just a wrapper for \$program.\" 1>&2 - echo \"See the $PACKAGE documentation for more information.\" 1>&2 - exit 1 - fi -fi\ -" - chmod +x $output - fi - exit 0 - ;; - esac - - # See if we need to build an old-fashioned archive. - for oldlib in $oldlibs; do - - if test "$build_libtool_libs" = convenience; then - oldobjs="$libobjs_save" - addlibs="$convenience" - build_libtool_libs=no - else - if test "$build_libtool_libs" = module; then - oldobjs="$libobjs_save" - build_libtool_libs=no - else - oldobjs="$objs "`$echo "X$libobjs_save" | $SP2NL | $Xsed -e '/\.'${libext}'$/d' -e '/\.lib$/d' -e "$lo2o" | $NL2SP` - fi - addlibs="$old_convenience" - fi - - if test -n "$addlibs"; then - gentop="$output_objdir/${outputname}x" - $show "${rm}r $gentop" - $run ${rm}r "$gentop" - $show "mkdir $gentop" - $run mkdir "$gentop" - status=$? - if test $status -ne 0 && test ! -d "$gentop"; then - exit $status - fi - generated="$generated $gentop" - - # Add in members from convenience archives. - for xlib in $addlibs; do - # Extract the objects. - case "$xlib" in - [\\/]* | [A-Za-z]:[\\/]*) xabs="$xlib" ;; - *) xabs=`pwd`"/$xlib" ;; - esac - xlib=`$echo "X$xlib" | $Xsed -e 's%^.*/%%'` - xdir="$gentop/$xlib" - - $show "${rm}r $xdir" - $run ${rm}r "$xdir" - $show "mkdir $xdir" - $run mkdir "$xdir" - status=$? - if test $status -ne 0 && test ! -d "$xdir"; then - exit $status - fi - $show "(cd $xdir && $AR x $xabs)" - $run eval "(cd \$xdir && $AR x \$xabs)" || exit $? - - oldobjs="$oldobjs "`find $xdir -name \*.${objext} -print -o -name \*.lo -print | $NL2SP` - done - fi - - # Do each command in the archive commands. - if test -n "$old_archive_from_new_cmds" && test "$build_libtool_libs" = yes; then - eval cmds=\"$old_archive_from_new_cmds\" - else - # Ensure that we have .o objects in place in case we decided - # not to build a shared library, and have fallen back to building - # static libs even though --disable-static was passed! - for oldobj in $oldobjs; do - if test ! -f $oldobj; then - xdir=`$echo "X$oldobj" | $Xsed -e 's%/[^/]*$%%'` - if test "X$xdir" = "X$oldobj"; then - xdir="." - else - xdir="$xdir" - fi - baseobj=`$echo "X$oldobj" | $Xsed -e 's%^.*/%%'` - obj=`$echo "X$baseobj" | $Xsed -e "$o2lo"` - $show "(cd $xdir && ${LN_S} $obj $baseobj)" - $run eval '(cd $xdir && ${LN_S} $obj $baseobj)' || exit $? - fi - done - - eval cmds=\"$old_archive_cmds\" - fi - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$generated"; then - $show "${rm}r$generated" - $run ${rm}r$generated - fi - - # Now create the libtool archive. - case "$output" in - *.la) - old_library= - test "$build_old_libs" = yes && old_library="$libname.$libext" - $show "creating $output" - - if test -n "$xrpath"; then - temp_xrpath= - for libdir in $xrpath; do - temp_xrpath="$temp_xrpath -R$libdir" - done - dependency_libs="$temp_xrpath $dependency_libs" - fi - - # Only create the output if not a dry run. - if test -z "$run"; then - for installed in no yes; do - if test "$installed" = yes; then - if test -z "$install_libdir"; then - break - fi - output="$output_objdir/$outputname"i - fi - $rm $output - $echo > $output "\ -# $outputname - a libtool library file -# Generated by $PROGRAM - GNU $PACKAGE $VERSION$TIMESTAMP -# -# Please DO NOT delete this file! -# It is necessary for linking the library. - -# The name that we can dlopen(3). -dlname='$dlname' - -# Names of this library. -library_names='$library_names' - -# The name of the static archive. -old_library='$old_library' - -# Libraries that this one depends upon. -dependency_libs='$dependency_libs' - -# Version information for $libname. -current=$current -age=$age -revision=$revision - -# Is this an already installed library? -installed=$installed - -# Directory that this library needs to be installed in: -libdir='$install_libdir'\ -" - done - fi - - # Do a symbolic link so that the libtool archive can be found in - # LD_LIBRARY_PATH before the program is installed. - $show "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" - $run eval "(cd $output_objdir && $rm $outputname && $LN_S ../$outputname $outputname)" || exit $? - ;; - esac - exit 0 - ;; - - # libtool install mode - install) - modename="$modename: install" - - # There may be an optional sh(1) argument at the beginning of - # install_prog (especially on Windows NT). - if test "$nonopt" = "$SHELL" || test "$nonopt" = /bin/sh; then - # Aesthetically quote it. - arg=`$echo "X$nonopt" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$arg " - arg="$1" - shift - else - install_prog= - arg="$nonopt" - fi - - # The real first argument should be the name of the installation program. - # Aesthetically quote it. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog$arg" - - # We need to accept at least all the BSD install flags. - dest= - files= - opts= - prev= - install_type= - isdir=no - stripme= - for arg - do - if test -n "$dest"; then - files="$files $dest" - dest="$arg" - continue - fi - - case "$arg" in - -d) isdir=yes ;; - -f) prev="-f" ;; - -g) prev="-g" ;; - -m) prev="-m" ;; - -o) prev="-o" ;; - -s) - stripme=" -s" - continue - ;; - -*) ;; - - *) - # If the previous option needed an argument, then skip it. - if test -n "$prev"; then - prev= - else - dest="$arg" - continue - fi - ;; - esac - - # Aesthetically quote the argument. - arg=`$echo "X$arg" | $Xsed -e "$sed_quote_subst"` - case "$arg" in - *[\[\~\#\^\&\*\(\)\{\}\|\;\<\>\?\'\ \ ]*|*]*) - arg="\"$arg\"" - ;; - esac - install_prog="$install_prog $arg" - done - - if test -z "$install_prog"; then - $echo "$modename: you must specify an install program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -n "$prev"; then - $echo "$modename: the \`$prev' option requires an argument" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - if test -z "$files"; then - if test -z "$dest"; then - $echo "$modename: no file or destination specified" 1>&2 - else - $echo "$modename: you must specify a destination" 1>&2 - fi - $echo "$help" 1>&2 - exit 1 - fi - - # Strip any trailing slash from the destination. - dest=`$echo "X$dest" | $Xsed -e 's%/$%%'` - - # Check to see that the destination is a directory. - test -d "$dest" && isdir=yes - if test "$isdir" = yes; then - destdir="$dest" - destname= - else - destdir=`$echo "X$dest" | $Xsed -e 's%/[^/]*$%%'` - test "X$destdir" = "X$dest" && destdir=. - destname=`$echo "X$dest" | $Xsed -e 's%^.*/%%'` - - # Not a directory, so check to see that there is only one file specified. - set dummy $files - if test $# -gt 2; then - $echo "$modename: \`$dest' is not a directory" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - fi - case "$destdir" in - [\\/]* | [A-Za-z]:[\\/]*) ;; - *) - for file in $files; do - case "$file" in - *.lo) ;; - *) - $echo "$modename: \`$destdir' must be an absolute directory name" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - done - ;; - esac - - # This variable tells wrapper scripts just to set variables rather - # than running their programs. - libtool_install_magic="$magic" - - staticlibs= - future_libdirs= - current_libdirs= - for file in $files; do - - # Do each installation. - case "$file" in - *.a | *.lib) - # Do the static libraries later. - staticlibs="$staticlibs $file" - ;; - - *.la) - # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$file' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - library_names= - old_library= - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Add the libdir to current_libdirs if it is the destination. - if test "X$destdir" = "X$libdir"; then - case "$current_libdirs " in - *" $libdir "*) ;; - *) current_libdirs="$current_libdirs $libdir" ;; - esac - else - # Note the libdir as a future libdir. - case "$future_libdirs " in - *" $libdir "*) ;; - *) future_libdirs="$future_libdirs $libdir" ;; - esac - fi - - dir="`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'`/" - test "X$dir" = "X$file/" && dir= - dir="$dir$objdir" - - # See the names of the shared library. - set dummy $library_names - if test -n "$2"; then - realname="$2" - shift - shift - - # Install the shared library and build the symlinks. - $show "$install_prog $dir/$realname $destdir/$realname" - $run eval "$install_prog $dir/$realname $destdir/$realname" || exit $? - - if test $# -gt 0; then - # Delete the old symlinks, and create new ones. - for linkname - do - if test "$linkname" != "$realname"; then - $show "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - $run eval "(cd $destdir && $rm $linkname && $LN_S $realname $linkname)" - fi - done - fi - - # Do each command in the postinstall commands. - lib="$destdir/$realname" - eval cmds=\"$postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - fi - - # Install the pseudo-library for information purposes. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - instname="$dir/$name"i - $show "$install_prog $instname $destdir/$name" - $run eval "$install_prog $instname $destdir/$name" || exit $? - - # Maybe install the static library, too. - test -n "$old_library" && staticlibs="$staticlibs $dir/$old_library" - ;; - - *.lo) - # Install (i.e. copy) a libtool object. - - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Deduce the name of the destination old-style object file. - case "$destfile" in - *.lo) - staticdest=`$echo "X$destfile" | $Xsed -e "$lo2o"` - ;; - *.o | *.obj) - staticdest="$destfile" - destfile= - ;; - *) - $echo "$modename: cannot copy a libtool object to \`$destfile'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; - esac - - # Install the libtool object if requested. - if test -n "$destfile"; then - $show "$install_prog $file $destfile" - $run eval "$install_prog $file $destfile" || exit $? - fi - - # Install the old object if enabled. - if test "$build_old_libs" = yes; then - # Deduce the name of the old-style object file. - staticobj=`$echo "X$file" | $Xsed -e "$lo2o"` - - $show "$install_prog $staticobj $staticdest" - $run eval "$install_prog \$staticobj \$staticdest" || exit $? - fi - exit 0 - ;; - - *) - # Figure out destination file name, if it wasn't already specified. - if test -n "$destname"; then - destfile="$destdir/$destname" - else - destfile=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - destfile="$destdir/$destfile" - fi - - # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - link_against_libtool_libs= - relink_command= - - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Check the variables that should have been set. - if test -z "$link_against_libtool_libs"; then - $echo "$modename: invalid libtool wrapper script \`$file'" 1>&2 - exit 1 - fi - - finalize=yes - for lib in $link_against_libtool_libs; do - # Check to see that each library is installed. - libdir= - if test -f "$lib"; then - # If there is no directory component, then add one. - case "$lib" in - */* | *\\*) . $lib ;; - *) . ./$lib ;; - esac - fi - libfile="$libdir/`$echo "X$lib" | $Xsed -e 's%^.*/%%g'`" - if test -n "$libdir" && test ! -f "$libfile"; then - $echo "$modename: warning: \`$lib' has not been installed in \`$libdir'" 1>&2 - finalize=no - fi - done - - outputname= - if test "$fast_install" = no && test -n "$relink_command"; then - if test "$finalize" = yes && test -z "$run"; then - tmpdir="/tmp" - test -n "$TMPDIR" && tmpdir="$TMPDIR" - tmpdir="$tmpdir/libtool-$$" - if $mkdir -p "$tmpdir" && chmod 700 "$tmpdir"; then : - else - $echo "$modename: error: cannot create temporary directory \`$tmpdir'" 1>&2 - continue - fi - outputname="$tmpdir/$file" - # Replace the output file specification. - relink_command=`$echo "X$relink_command" | $Xsed -e 's%@OUTPUT@%'"$outputname"'%g'` - - $show "$relink_command" - if $run eval "$relink_command"; then : - else - $echo "$modename: error: relink \`$file' with the above command before installing it" 1>&2 - ${rm}r "$tmpdir" - continue - fi - file="$outputname" - else - $echo "$modename: warning: cannot relink \`$file'" 1>&2 - fi - else - # Install the binary that we compiled earlier. - file=`$echo "X$file" | $Xsed -e "s%\([^/]*\)$%$objdir/\1%"` - fi - fi - - $show "$install_prog$stripme $file $destfile" - $run eval "$install_prog\$stripme \$file \$destfile" || exit $? - test -n "$outputname" && ${rm}r "$tmpdir" - ;; - esac - done - - for file in $staticlibs; do - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - # Set up the ranlib parameters. - oldlib="$destdir/$name" - - $show "$install_prog $file $oldlib" - $run eval "$install_prog \$file \$oldlib" || exit $? - - # Do each command in the postinstall commands. - eval cmds=\"$old_postinstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || exit $? - done - IFS="$save_ifs" - done - - if test -n "$future_libdirs"; then - $echo "$modename: warning: remember to run \`$progname --finish$future_libdirs'" 1>&2 - fi - - if test -n "$current_libdirs"; then - # Maybe just do a dry run. - test -n "$run" && current_libdirs=" -n$current_libdirs" - exec $SHELL $0 --finish$current_libdirs - exit 1 - fi - - exit 0 - ;; - - # libtool finish mode - finish) - modename="$modename: finish" - libdirs="$nonopt" - admincmds= - - if test -n "$finish_cmds$finish_eval" && test -n "$libdirs"; then - for dir - do - libdirs="$libdirs $dir" - done - - for libdir in $libdirs; do - if test -n "$finish_cmds"; then - # Do each command in the finish commands. - eval cmds=\"$finish_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" || admincmds="$admincmds - $cmd" - done - IFS="$save_ifs" - fi - if test -n "$finish_eval"; then - # Do the single finish_eval. - eval cmds=\"$finish_eval\" - $run eval "$cmds" || admincmds="$admincmds - $cmds" - fi - done - fi - - # Exit here if they wanted silent mode. - test "$show" = : && exit 0 - - echo "----------------------------------------------------------------------" - echo "Libraries have been installed in:" - for libdir in $libdirs; do - echo " $libdir" - done - echo - echo "If you ever happen to want to link against installed libraries" - echo "in a given directory, LIBDIR, you must either use libtool, and" - echo "specify the full pathname of the library, or use \`-LLIBDIR'" - echo "flag during linking and do at least one of the following:" - if test -n "$shlibpath_var"; then - echo " - add LIBDIR to the \`$shlibpath_var' environment variable" - echo " during execution" - fi - if test -n "$runpath_var"; then - echo " - add LIBDIR to the \`$runpath_var' environment variable" - echo " during linking" - fi - if test -n "$hardcode_libdir_flag_spec"; then - libdir=LIBDIR - eval flag=\"$hardcode_libdir_flag_spec\" - - echo " - use the \`$flag' linker flag" - fi - if test -n "$admincmds"; then - echo " - have your system administrator run these commands:$admincmds" - fi - if test -f /etc/ld.so.conf; then - echo " - have your system administrator add LIBDIR to \`/etc/ld.so.conf'" - fi - echo - echo "See any operating system documentation about shared libraries for" - echo "more information, such as the ld(1) and ld.so(8) manual pages." - echo "----------------------------------------------------------------------" - exit 0 - ;; - - # libtool execute mode - execute) - modename="$modename: execute" - - # The first argument is the command name. - cmd="$nonopt" - if test -z "$cmd"; then - $echo "$modename: you must specify a COMMAND" 1>&2 - $echo "$help" - exit 1 - fi - - # Handle -dlopen flags immediately. - for file in $execute_dlfiles; do - if test ! -f "$file"; then - $echo "$modename: \`$file' is not a file" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - dir= - case "$file" in - *.la) - # Check to see that this really is a libtool archive. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then : - else - $echo "$modename: \`$lib' is not a valid libtool archive" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - # Read the libtool library. - dlname= - library_names= - - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Skip this library if it cannot be dlopened. - if test -z "$dlname"; then - # Warn if it was a shared library. - test -n "$library_names" && $echo "$modename: warning: \`$file' was not linked with \`-export-dynamic'" - continue - fi - - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - - if test -f "$dir/$objdir/$dlname"; then - dir="$dir/$objdir" - else - $echo "$modename: cannot find \`$dlname' in \`$dir' or \`$dir/$objdir'" 1>&2 - exit 1 - fi - ;; - - *.lo) - # Just add the directory containing the .lo file. - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - ;; - - *) - $echo "$modename: warning \`-dlopen' is ignored for non-libtool libraries and objects" 1>&2 - continue - ;; - esac - - # Get the absolute pathname. - absdir=`cd "$dir" && pwd` - test -n "$absdir" && dir="$absdir" - - # Now add the directory to shlibpath_var. - if eval "test -z \"\$$shlibpath_var\""; then - eval "$shlibpath_var=\"\$dir\"" - else - eval "$shlibpath_var=\"\$dir:\$$shlibpath_var\"" - fi - done - - # This variable tells wrapper scripts just to set shlibpath_var - # rather than running their programs. - libtool_execute_magic="$magic" - - # Check if any of the arguments is a wrapper script. - args= - for file - do - case "$file" in - -*) ;; - *) - # Do a test to see if this is really a libtool program. - if (sed -e '4q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - # If there is no directory component, then add one. - case "$file" in - */* | *\\*) . $file ;; - *) . ./$file ;; - esac - - # Transform arg to wrapped name. - file="$progdir/$program" - fi - ;; - esac - # Quote arguments (to preserve shell metacharacters). - file=`$echo "X$file" | $Xsed -e "$sed_quote_subst"` - args="$args \"$file\"" - done - - if test -z "$run"; then - if test -n "$shlibpath_var"; then - # Export the shlibpath_var. - eval "export $shlibpath_var" - fi - - # Restore saved enviroment variables - if test "${save_LC_ALL+set}" = set; then - LC_ALL="$save_LC_ALL"; export LC_ALL - fi - if test "${save_LANG+set}" = set; then - LANG="$save_LANG"; export LANG - fi - - # Now actually exec the command. - eval "exec \$cmd$args" - - $echo "$modename: cannot exec \$cmd$args" - exit 1 - else - # Display what would be done. - if test -n "$shlibpath_var"; then - eval "\$echo \"\$shlibpath_var=\$$shlibpath_var\"" - $echo "export $shlibpath_var" - fi - $echo "$cmd$args" - exit 0 - fi - ;; - - # libtool uninstall mode - uninstall) - modename="$modename: uninstall" - rm="$nonopt" - files= - - for arg - do - case "$arg" in - -*) rm="$rm $arg" ;; - *) files="$files $arg" ;; - esac - done - - if test -z "$rm"; then - $echo "$modename: you must specify an RM program" 1>&2 - $echo "$help" 1>&2 - exit 1 - fi - - for file in $files; do - dir=`$echo "X$file" | $Xsed -e 's%/[^/]*$%%'` - test "X$dir" = "X$file" && dir=. - name=`$echo "X$file" | $Xsed -e 's%^.*/%%'` - - rmfiles="$file" - - case "$name" in - *.la) - # Possibly a libtool archive, so verify it. - if (sed -e '2q' $file | egrep "^# Generated by .*$PACKAGE") >/dev/null 2>&1; then - . $dir/$name - - # Delete the libtool libraries and symlinks. - for n in $library_names; do - rmfiles="$rmfiles $dir/$n" - done - test -n "$old_library" && rmfiles="$rmfiles $dir/$old_library" - - $show "$rm $rmfiles" - $run $rm $rmfiles - - if test -n "$library_names"; then - # Do each command in the postuninstall commands. - eval cmds=\"$postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi - - if test -n "$old_library"; then - # Do each command in the old_postuninstall commands. - eval cmds=\"$old_postuninstall_cmds\" - IFS="${IFS= }"; save_ifs="$IFS"; IFS='~' - for cmd in $cmds; do - IFS="$save_ifs" - $show "$cmd" - $run eval "$cmd" - done - IFS="$save_ifs" - fi - - # FIXME: should reinstall the best remaining shared library. - fi - ;; - - *.lo) - if test "$build_old_libs" = yes; then - oldobj=`$echo "X$name" | $Xsed -e "$lo2o"` - rmfiles="$rmfiles $dir/$oldobj" - fi - $show "$rm $rmfiles" - $run $rm $rmfiles - ;; - - *) - $show "$rm $rmfiles" - $run $rm $rmfiles - ;; - esac - done - exit 0 - ;; - - "") - $echo "$modename: you must specify a MODE" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 - ;; - esac - - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$generic_help" 1>&2 - exit 1 -fi # test -z "$show_help" - -# We need to display help for each of the modes. -case "$mode" in -"") $echo \ -"Usage: $modename [OPTION]... [MODE-ARG]... - -Provide generalized library-building support services. - - --config show all configuration variables - --debug enable verbose shell tracing --n, --dry-run display commands without modifying any files - --features display basic configuration information and exit - --finish same as \`--mode=finish' - --help display this help message and exit - --mode=MODE use operation mode MODE [default=inferred from MODE-ARGS] - --quiet same as \`--silent' - --silent don't print informational messages - --version print version information - -MODE must be one of the following: - - compile compile a source file into a libtool object - execute automatically set library path, then run a program - finish complete the installation of libtool libraries - install install libraries or executables - link create a library or an executable - uninstall remove libraries from an installed directory - -MODE-ARGS vary depending on the MODE. Try \`$modename --help --mode=MODE' for -a more detailed description of MODE." - exit 0 - ;; - -compile) - $echo \ -"Usage: $modename [OPTION]... --mode=compile COMPILE-COMMAND... SOURCEFILE - -Compile a source file into a libtool library object. - -This mode accepts the following additional options: - - -o OUTPUT-FILE set the output file name to OUTPUT-FILE - -static always build a \`.o' file suitable for static linking - -COMPILE-COMMAND is a command to be used in creating a \`standard' object file -from the given SOURCEFILE. - -The output file name is determined by removing the directory component from -SOURCEFILE, then substituting the C source code suffix \`.c' with the -library object suffix, \`.lo'." - ;; - -execute) - $echo \ -"Usage: $modename [OPTION]... --mode=execute COMMAND [ARGS]... - -Automatically set library path, then run a program. - -This mode accepts the following additional options: - - -dlopen FILE add the directory containing FILE to the library path - -This mode sets the library path environment variable according to \`-dlopen' -flags. - -If any of the ARGS are libtool executable wrappers, then they are translated -into their corresponding uninstalled binary, and any of their required library -directories are added to the library path. - -Then, COMMAND is executed, with ARGS as arguments." - ;; - -finish) - $echo \ -"Usage: $modename [OPTION]... --mode=finish [LIBDIR]... - -Complete the installation of libtool libraries. - -Each LIBDIR is a directory that contains libtool libraries. - -The commands that this mode executes may require superuser privileges. Use -the \`--dry-run' option if you just want to see what would be executed." - ;; - -install) - $echo \ -"Usage: $modename [OPTION]... --mode=install INSTALL-COMMAND... - -Install executables or libraries. - -INSTALL-COMMAND is the installation command. The first component should be -either the \`install' or \`cp' program. - -The rest of the components are interpreted as arguments to that command (only -BSD-compatible install options are recognized)." - ;; - -link) - $echo \ -"Usage: $modename [OPTION]... --mode=link LINK-COMMAND... - -Link object files or libraries together to form another library, or to -create an executable program. - -LINK-COMMAND is a command using the C compiler that you would use to create -a program from several object files. - -The following components of LINK-COMMAND are treated specially: - - -all-static do not do any dynamic linking at all - -avoid-version do not add a version suffix if possible - -dlopen FILE \`-dlpreopen' FILE if it cannot be dlopened at runtime - -dlpreopen FILE link in FILE and add its symbols to lt_preloaded_symbols - -export-dynamic allow symbols from OUTPUT-FILE to be resolved with dlsym(3) - -export-symbols SYMFILE - try to export only the symbols listed in SYMFILE - -export-symbols-regex REGEX - try to export only the symbols matching REGEX - -LLIBDIR search LIBDIR for required installed libraries - -lNAME OUTPUT-FILE requires the installed library libNAME - -module build a library that can dlopened - -no-undefined declare that a library does not refer to external symbols - -o OUTPUT-FILE create OUTPUT-FILE from the specified objects - -release RELEASE specify package release information - -rpath LIBDIR the created library will eventually be installed in LIBDIR - -R[ ]LIBDIR add LIBDIR to the runtime path of programs and libraries - -static do not do any dynamic linking of libtool libraries - -version-info CURRENT[:REVISION[:AGE]] - specify library version info [each variable defaults to 0] - -All other options (arguments beginning with \`-') are ignored. - -Every other argument is treated as a filename. Files ending in \`.la' are -treated as uninstalled libtool libraries, other files are standard or library -object files. - -If the OUTPUT-FILE ends in \`.la', then a libtool library is created, -only library objects (\`.lo' files) may be specified, and \`-rpath' is -required, except when creating a convenience library. - -If OUTPUT-FILE ends in \`.a' or \`.lib', then a standard library is created -using \`ar' and \`ranlib', or on Windows using \`lib'. - -If OUTPUT-FILE ends in \`.lo' or \`.${objext}', then a reloadable object file -is created, otherwise an executable program is created." - ;; - -uninstall) - $echo \ -"Usage: $modename [OPTION]... --mode=uninstall RM [RM-OPTION]... FILE... - -Remove libraries from an installation directory. - -RM is the name of the program to use to delete files associated with each FILE -(typically \`/bin/rm'). RM-OPTIONS are options (such as \`-f') to be passed -to RM. - -If FILE is a libtool library, all the files associated with it are deleted. -Otherwise, only FILE itself is deleted using RM." - ;; - -*) - $echo "$modename: invalid operation mode \`$mode'" 1>&2 - $echo "$help" 1>&2 - exit 1 - ;; -esac - -echo -$echo "Try \`$modename --help' for more information about other modes." - -exit 0 - -# Local Variables: -# mode:shell-script -# sh-indentation:2 -# End: |