aboutsummaryrefslogtreecommitdiffstats
path: root/help
diff options
context:
space:
mode:
Diffstat (limited to 'help')
-rw-r--r--help/C/evolution-faq.sgml859
-rw-r--r--help/ChangeLog4
2 files changed, 425 insertions, 438 deletions
diff --git a/help/C/evolution-faq.sgml b/help/C/evolution-faq.sgml
index 62621ba798..84f71a89fa 100644
--- a/help/C/evolution-faq.sgml
+++ b/help/C/evolution-faq.sgml
@@ -1,32 +1,32 @@
<!--
<!DOCTYPE appendix PUBLIC "-//GNOME//DTD DocBook PNG Variant V1.1//EN">
-->
- <appendix id="evolution-faq">
+<appendix id="evolution-faq">
<title>Frequently Asked Questions About Ximian Evolution</title>
- <para>
- Here are some frequently asked questions about the
- <application>Evolution</application> groupware suite from
- Ximian.
- </para>
-
- <!-- Section: Getting and compiling -->
-
- <sect1 id="get-and-compile">
- <title>
- Getting and Compiling Evolution
- </title>
+ <para>
+ Here are some frequently asked questions about the
+ <application>Evolution</application> groupware suite from
+ Ximian.
+ </para>
+
+ <!-- Section: Getting and compiling -->
+
+ <sect1 id="get-and-compile">
+ <title>
+ Getting and Compiling Evolution
+ </title>
<qandaset>
<qandaentry>
<question>
<para>
- Where can I get the latest Evolution release?
+ Where can I get the latest Evolution release?
</para>
</question>
<answer>
<para>
- There are two ways to install the latest Evolution
- release:
- <itemizedlist>
+ There are two ways to install the latest Evolution
+ release:
+ <itemizedlist>
<listitem>
<para>
If you have Ximian GNOME installed, you can start
@@ -40,18 +40,18 @@
<listitem>
<para>
- If you want to compile from source, you can
- download the latest official Evolution tarball
- from:
+ If you want to compile from source, you can
+ download the latest official Evolution tarball
+ from:
</para>
<para>
<ulink url="ftp://ftp.gnome.org/pub/GNOME/unstable/sources/evolution">
- ftp://ftp.gnome.org/pub/GNOME/unstable/sources/evolution</ulink>
+ ftp://ftp.gnome.org/pub/GNOME/unstable/sources/evolution</ulink>
</para>
</listitem>
</itemizedlist>
- </para>
+ </para>
</answer>
</qandaentry>
<qandaentry>
@@ -61,15 +61,15 @@
</para>
</question>
<answer>
- <para>
- Yes, if you have Ximian GNOME installed. Just run Red
- Carpet and subscribe to the Evolution Snapshot channel.
- </para>
-
- <para>
- You can check the status of snapshots at <ulink
- url="http://primates.ximian.com/~snapshot">http://primates.ximian.com/~snapshot</ulink>.
- </para>
+ <para>
+ Yes, if you have Ximian GNOME installed. Just run Red
+ Carpet and subscribe to the Evolution Snapshot channel.
+ </para>
+
+ <para>
+ You can check the status of snapshots at <ulink
+ url="http://primates.ximian.com/~snapshot">http://primates.ximian.com/~snapshot</ulink>.
+ </para>
</answer>
</qandaentry>
<qandaentry>
@@ -95,34 +95,34 @@
<answer>
<para>
If you already have <ulink
- url="http://cvs.gnome.org">GNOME CVS</ulink> access,
+ url="http://cvs.gnome.org">GNOME CVS</ulink> access,
simply check out the following modules: evolution,
gtkhtml, gal.
- </para>
- <para>
- If you don't have a CVS account, you can use anoncvs
- instead. Bear in mind that anoncvs is only synchronized once
- a day, and code received from anoncvs may not be latest
- version available.
- </para>
-
- <para>
- Before using the anoncvs server, you have to log into it.
- This only needs to be done once. Use this command:
- </para>
-
- <programlisting>
-cvs -z3 -d :pserver:anonymous@anoncvs.gnome.org:/cvs/gnome login
- </programlisting>
-
- <para>
- Then you can retrieve the modules needed to compile Evolution
- using the following command:
- </para>
-
- <programlisting>
-cvs -z3 -d :pserver:anonymous@anoncvs.gnome.org:/cvs/gnome co evolution gtkhtml gal
- </programlisting>
+ </para>
+ <para>
+ If you don't have a CVS account, you can use anoncvs
+ instead. Bear in mind that anoncvs is only synchronized once
+ a day, and code received from anoncvs may not be latest
+ version available.
+ </para>
+
+ <para>
+ Before using the anoncvs server, you have to log into it.
+ This only needs to be done once. Use this command:
+ </para>
+
+ <programlisting>
+ cvs -z3 -d :pserver:anonymous@anoncvs.gnome.org:/cvs/gnome login
+ </programlisting>
+
+ <para>
+ Then you can retrieve the modules needed to compile Evolution
+ using the following command:
+ </para>
+
+ <programlisting>
+ cvs -z3 -d :pserver:anonymous@anoncvs.gnome.org:/cvs/gnome co evolution gtkhtml gal
+ </programlisting>
</answer>
</qandaentry>
<qandaentry>
@@ -130,47 +130,47 @@ cvs -z3 -d :pserver:anonymous@anoncvs.gnome.org:/cvs/gnome co evolution gtkhtml
<para>
How should I compile Evolution avoiding conflicts with my
existing GNOME installation?
- </para>
+ </para>
</question>
<answer>
- <para>
- The best way is to install Evolution into a separate prefix.
- In order to specify a non-default installation prefix, you
- can pass the <parameter>--prefix</parameter> option to
- <filename>configure</filename> or
- <filename>autogen.sh</filename>. For example:
- </para>
-
- <programlisting>
-cd /cvs/evolution
-./autogen.sh --prefix=/opt/gnome
- </programlisting>
-
- <para>
- If you install Evolution and the Evolution libraries in a
- non-standard prefix, make sure you set the appropriate
- environment variables in the startup script for Evolution:
- </para>
-
- <programlisting>
-export PATH=/opt/gnome:$PATH
-export GNOME_PATH=/opt/gnome:/usr
- </programlisting>
-
- <para>
- You may also need to add <filename>$prefix/lib</filename>
- (e.g. <filename>/opt/gnome/lib</filename>) to your
- <filename>/etc/ld.so.conf</filename>. Of course, this will
- not work for systems which do not use ld.so.conf, such as
- HP-UX.
- </para>
+ <para>
+ The best way is to install Evolution into a separate prefix.
+ In order to specify a non-default installation prefix, you
+ can pass the <parameter>--prefix</parameter> option to
+ <filename>configure</filename> or
+ <filename>autogen.sh</filename>. For example:
+ </para>
+
+ <programlisting>
+ cd /cvs/evolution
+ ./autogen.sh --prefix=/opt/gnome
+ </programlisting>
+
+ <para>
+ If you install Evolution and the Evolution libraries in a
+ non-standard prefix, make sure you set the appropriate
+ environment variables in the startup script for Evolution:
+ </para>
+
+ <programlisting>
+ export PATH=/opt/gnome:$PATH
+ export GNOME_PATH=/opt/gnome:/usr
+ </programlisting>
+
+ <para>
+ You may also need to add <filename>$prefix/lib</filename>
+ (e.g. <filename>/opt/gnome/lib</filename>) to your
+ <filename>/etc/ld.so.conf</filename>. Of course, this will
+ not work for systems which do not use ld.so.conf, such as
+ HP-UX.
+ </para>
</answer>
</qandaentry>
<qandaentry>
<question>
<para>
I get <computeroutput>make: *** No rule to make target
- `all-no-@BUILD_INCLUDED_LIBINTL@'</computeroutput>
+ `all-no-@BUILD_INCLUDED_LIBINTL@'</computeroutput>
</para>
</question>
<answer>
@@ -183,61 +183,61 @@ export GNOME_PATH=/opt/gnome:/usr
</answer>
</qandaentry>
</qandaset>
- </sect1>
+ </sect1>
- <sect1 id="faq-trouble">
- <title>Troubleshooting</title>
+ <sect1 id="faq-trouble">
+ <title>Troubleshooting</title>
<qandaset>
<qandaentry>
<question>
<para>
I get <computeroutput>Cannot initialize the Evolution
- shell</computeroutput>.
- </para>
+ shell</computeroutput>.
+ </para>
</question>
<answer>
<para>
Check that:
</para>
- <itemizedlist>
- <listitem>
- <para>
- <filename>oafd</filename> is listen in your <envar>PATH</envar>
- environment variable.
- </para>
- </listitem>
-
- <listitem>
- <para>
- <filename>GNOME_Evolution_Shell.oaf</filename> and
- the other      
- <filename>GNOME_Evolution_*.oaf</filename> files are
- readable and installed in
- <filename>$prefix/share/oaf</filename>, where
- <filename>$prefix</filename> is one of the prefixes
- listed in <envar>GNOME_PATH</envar> or
- <envar>OAF_INFO_PATH</envar>.  (These variables are
- supposed to contain $PATH-like colon-separated lists of
- paths.  If the installation prefix for Evolution is
- different from that). Run `oaf-slay' once before running
- `evolution' again if you change $GNOME_PATH or
- $OAF_INFO_PATH.
- </para>
- </listitem>
-
- <listitem>
- <para>
- <filename>evolution</filename>,
- <filename>evolution-mail</filename> and the other
- <filename>evolution-*</filename> executables are in your
- $PATH.
- </para>
- </listitem>
- </itemizedlist>
+ <itemizedlist>
+ <listitem>
+ <para>
+ <filename>oafd</filename> is listen in your <envar>PATH</envar>
+ environment variable.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <filename>GNOME_Evolution_Shell.oaf</filename> and
+ the other      
+ <filename>GNOME_Evolution_*.oaf</filename> files are
+ readable and installed in
+ <filename>$prefix/share/oaf</filename>, where
+ <filename>$prefix</filename> is one of the prefixes
+ listed in <envar>GNOME_PATH</envar> or
+ <envar>OAF_INFO_PATH</envar>.  (These variables are
+ supposed to contain $PATH-like colon-separated lists of
+ paths.  If the installation prefix for Evolution is
+ different from that). Run `oaf-slay' once before running
+ `evolution' again if you change $GNOME_PATH or
+ $OAF_INFO_PATH.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <filename>evolution</filename>,
+ <filename>evolution-mail</filename> and the other
+ <filename>evolution-*</filename> executables are in your
+ $PATH.
+ </para>
+ </listitem>
+ </itemizedlist>
</answer>
</qandaentry>
-
+
<qandaentry>
<question>
<para>
@@ -246,107 +246,107 @@ export GNOME_PATH=/opt/gnome:/usr
</question>
<answer>
<para>
- This actually means that Evolution cannot activate the HTML
- editor component from GtkHTML. The comments in the previous
- answer still apply; also make sure that
- <command>gnome-gtkhtml-editor</command> is in your
- <envar>PATH</envar>.
- </para>
+ This actually means that Evolution cannot activate the HTML
+ editor component from GtkHTML. The comments in the previous
+ answer still apply; also make sure that
+ <command>gnome-gtkhtml-editor</command> is in your
+ <envar>PATH</envar>.
+ </para>
</answer>
</qandaentry>
-
- <qandaentry>
- <question>
- <para>
- I updated my Evolution, but my addressbook contacts are no
- longer there, what should I do?
- </para>
+
+ <qandaentry>
+ <question>
+ <para>
+ I updated my Evolution, but my addressbook contacts are no
+ longer there, what should I do?
+ </para>
</question>
<answer>
- <para>
- Evolution uses the <filename>libdb</filename> library to
- handle the addressbook database. Two versions of
- <filename>libdb</filename> can be used with Evolution: version
- 1.88 and version 2.
- </para>
-
- <para>
- Unfortunately, an Evolution executable that is linked against
- a certain version of <filename>libdb</filename> will only be
- able to read addressbook files written by another Evolution
- executable that is linked with the same version of the
- library. If your addressbook is not readable by Evolution
- anymore, it probably means that you used to have Evolution
- linked with a certain version of <filename>libdb</filename>,
- but now it gets linked to a different version.
- </para>
-
- <para>
- Because of the way <filename>libdb</filename> is designed, it
- is not easy for Evolution to automatically do the conversion
- between the two formats. But, if your Evolution used to be
- linked against version 1.85 and now is linked to version 2,
- there is a very simple way to convert the database and recover
- your data.
- </para>
-
- <itemizedlist>
-
- <listitem>
- <para>
- First of all, check the format of the database using the
- <command>file</command> command:
- </para>
-
- <programlisting>
+ <para>
+ Evolution uses the <filename>libdb</filename> library to
+ handle the addressbook database. Two versions of
+ <filename>libdb</filename> can be used with Evolution: version
+ 1.88 and version 2.
+ </para>
+
+ <para>
+ Unfortunately, an Evolution executable that is linked against
+ a certain version of <filename>libdb</filename> will only be
+ able to read addressbook files written by another Evolution
+ executable that is linked with the same version of the
+ library. If your addressbook is not readable by Evolution
+ anymore, it probably means that you used to have Evolution
+ linked with a certain version of <filename>libdb</filename>,
+ but now it gets linked to a different version.
+ </para>
+
+ <para>
+ Because of the way <filename>libdb</filename> is designed, it
+ is not easy for Evolution to automatically do the conversion
+ between the two formats. But, if your Evolution used to be
+ linked against version 1.85 and now is linked to version 2,
+ there is a very simple way to convert the database and recover
+ your data.
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ First of all, check the format of the database using the
+ <command>file</command> command:
+ </para>
+
+ <programlisting>
file ~/evolution/local/Contacts/addressbook.db
- </programlisting>
-
- <para>
- You want version 1.85 there. If your version is 2, then
- your current Evolution is probably linked against
- version 1.85 and you cannot convert the database to the
- old format. To do that, follow these instructions:
- </para>
- </listitem>
-
- <listitem>
- <para>
- Quit Evolution.
- </para>
- </listitem>
-
- <listitem>
- <para>
- Make a copy of the addressbook database for backup
- purposes.
- </para>
-
- <programlisting>
-cd ~/evolution/local/Contacts
-cp addressbook.db addressbook.db.backup
- </programlisting>
- </listitem>
-
- <listitem>
- <para>
- Convert the contacts to the new format using
- <command>db_dump185</command> and
- <command>db_load</command>:
- </para>
-
- <programlisting>
-db_dump185 ~/evolution/local/Contacts/addressbook.db.backup | db_load ~/evolution/local/Contacts/addressbook.db
- </programlisting>
- </listitem>
-
- <listitem>
- <para>
- Restart Evolution.
- </para>
- </listitem>
-
- </itemizedlist>
+ </programlisting>
+
+ <para>
+ You want version 1.85 there. If your version is 2, then
+ your current Evolution is probably linked against
+ version 1.85 and you cannot convert the database to the
+ old format. To do that, follow these instructions:
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Quit Evolution.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Make a copy of the addressbook database for backup
+ purposes.
+ </para>
+
+ <programlisting>
+ cd ~/evolution/local/Contacts
+ cp addressbook.db addressbook.db.backup
+ </programlisting>
+ </listitem>
+
+ <listitem>
+ <para>
+ Convert the contacts to the new format using
+ <command>db_dump185</command> and
+ <command>db_load</command>:
+ </para>
+
+ <programlisting>
+ db_dump185 ~/evolution/local/Contacts/addressbook.db.backup | db_load ~/evolution/local/Contacts/addressbook.db
+ </programlisting>
+ </listitem>
+
+ <listitem>
+ <para>
+ Restart Evolution.
+ </para>
+ </listitem>
+
+ </itemizedlist>
</answer>
</qandaentry>
@@ -365,8 +365,8 @@ db_dump185 ~/evolution/local/Contacts/addressbook.db.backup | db_load ~/evolutio
</para>
<programlisting>
-chmod 1777 /var/spool/mail
- </programlisting>
+ chmod 1777 /var/spool/mail
+ </programlisting>
<para>
Yes, we know this is a problem. It will be fixed eventually.
@@ -375,11 +375,11 @@ chmod 1777 /var/spool/mail
</qandaentry>
<qandaentry>
- <question>
- <para>
- Evolution crashes reporting that it couldn't allocate N
- billion bytes; how do I fix this?
- </para>
+ <question>
+ <para>
+ Evolution crashes reporting that it couldn't allocate N
+ billion bytes; how do I fix this?
+ </para>
</question>
<answer>
<para>
@@ -396,32 +396,32 @@ chmod 1777 /var/spool/mail
applies to GtkHTML upgrades; after upgrading and
installing a newer GtkHTML, always re-compile and
re-install Evolution against it.
- </para>
+ </para>
</answer>
</qandaentry>
<qandaentry>
- <question>
- <para>
- What is <command>killev</command> and why do I need to use it?
- </para>
+ <question>
+ <para>
+ What is <command>killev</command> and why do I need to use it?
+ </para>
</question>
<answer>
- <para>
- Evolution is actually made up of several components that run
- as separate processes. Evolution's shell is not very good
- at cleaning up stale processes, so it is possible that
- sometimes already-running components cause unexpected and/or
- broken behavior.
- </para>
-
- <para>
- It's always a good idea to run <command>killev</command>
- after a crash in Evolution, especially if the Evolution
- shell itself crashed. (If a component crashes instead, you
- should try to exit the shell cleanly first, so you give a
- chance to the other components to clean things up properly.)
- </para>
+ <para>
+ Evolution is actually made up of several components that run
+ as separate processes. Evolution's shell is not very good
+ at cleaning up stale processes, so it is possible that
+ sometimes already-running components cause unexpected and/or
+ broken behavior.
+ </para>
+
+ <para>
+ It's always a good idea to run <command>killev</command>
+ after a crash in Evolution, especially if the Evolution
+ shell itself crashed. (If a component crashes instead, you
+ should try to exit the shell cleanly first, so you give a
+ chance to the other components to clean things up properly.)
+ </para>
</answer>
</qandaentry>
@@ -438,32 +438,32 @@ chmod 1777 /var/spool/mail
GNOME Desktop to activate components. It will kill the
object activation daemon (<command>oafd</command>) as well
as all the active components on the system.
- </para>
-
- <para>
- Normally, you shouldn't need to run
- <command>oaf-slay</command>, unless <command>oafd</command>
- gets stuck or confused. For example, it might help in case
- Evolution cannot activate components.
- </para>
-
- <para>
- Using <command>oaf-slay</command>
- <command>oaf-slay</command> is quite drastic and can cause
- problems with other programs that use oaf, especially with
- <application>Nautilus</application>. To avoid problems, do
- not run <command>oaf-slay</command> while you are in GNOME.
- </para>
+ </para>
+
+ <para>
+ Normally, you shouldn't need to run
+ <command>oaf-slay</command>, unless <command>oafd</command>
+ gets stuck or confused. For example, it might help in case
+ Evolution cannot activate components.
+ </para>
+
+ <para>
+ Using <command>oaf-slay</command>
+ <command>oaf-slay</command> is quite drastic and can cause
+ problems with other programs that use oaf, especially with
+ <application>Nautilus</application>. To avoid problems, do
+ not run <command>oaf-slay</command> while you are in GNOME.
+ </para>
</answer>
</qandaentry>
</qandaset>
- </sect1>
+ </sect1>
- <sect1 id="faq-debugging">
+ <sect1 id="faq-debugging">
<title>Questions about Bugs and Debugging</title>
- <para>
- Find a bug? Here's how to help us fix it!
- </para>
+ <para>
+ Find a bug? Here's how to help us fix it!
+ </para>
<qandaset>
<qandaentry>
@@ -476,16 +476,16 @@ chmod 1777 /var/spool/mail
<para>
You should report bugs about Evolution into the Ximian bug
reporting system (Bugzilla), located at <ulink
- url="http://bugzilla.ximian.com">http://bugzilla.ximian.com</ulink>.
- </para>
-
+ url="http://bugzilla.ximian.com">http://bugzilla.ximian.com</ulink>.
+ </para>
+
<para>
Please use the query function to check if a bug has been
submitted already before submitting it.
</para>
</answer>
</qandaentry>
-
+
<qandaentry>
<question>
<para>
@@ -493,11 +493,11 @@ chmod 1777 /var/spool/mail
</para>
</question>
<answer>
- <para>
- Not yet. The Ximian bug tracker does not yet have an
- email-based interface, so Bug Buddy cannot talk to it. This
- will be fixed eventually.
- </para>
+ <para>
+ Not yet. The Ximian bug tracker does not yet have an
+ email-based interface, so Bug Buddy cannot talk to it. This
+ will be fixed eventually.
+ </para>
</answer>
</qandaentry>
@@ -508,114 +508,114 @@ chmod 1777 /var/spool/mail
</para>
</question>
<answer>
- <para>
- A stack trace is a list of the chain of function calls that
- lead to some point in the program. Typically, you want to
- get a stack trace when Evolution crashes or hangs and you
- want to try to figure out where in the code that happened
- and why. For this reason, stack traces are extremely
- useful for the Evolution developers, so it's important that
- you learn how to get them, and include them in crash
- reports. Once we have <command>bug-buddy</command> working
- with our bug database, it will be much easier to do
- this. Until then, here's how:
- </para>
-
- <para>
- First of all, in order to get a stack trace, your executable
- (and possibly the libraries) must be compiled with debugging
- symbols. Debugging symbols are created by default if you
- compile from CVS, and are included in the snapshot builds.
- If you decide to compile by yourself with some custom CFLAGS
- value, make sure <command>-g</command> is included in them.
- </para>
-
- <para>
- Finally, you must put the component that crashes through
- <command>gdb</command>. Make sure all the components are
- dead (exit Evolution and <command>killev</command>), then
- run the following command:
- </para>
-
- <programlisting>
-gdb name-of-component
- </programlisting>
-
- <para>
- Then, at the gdb prompt, type <userinput>r</userinput> (for
- "run") and wait a few seconds to make sure the component has
- registered with the name service. Then start Evolution
- normally from a different terminal.
- </para>
-
- <para>
- Then, reproduce the crash, and go back to the terminal where
- you ran <command>gdb</command>. If the component crashed,
- you should have a prompt there; otherwise, just hit
- <keycombo action=simul>
- <keycap>Control</keycap>
- <keycap>C</keycap>
- </keycombo>.
- At the prompt, type:
- </para>
-
- <programlisting>
-info threads
- </programlisting>
-
- <para>
- This will give you a list of the current running threads,
- e.g.
- </para>
-
- <screen>
-(gdb) info threads
- 8 Thread 6151 (LWP 14908) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 7 Thread 5126 (LWP 14907) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 6 Thread 4101 (LWP 1007) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 5 Thread 3076 (LWP 1006) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 4 Thread 2051 (LWP 1005) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 3 Thread 1026 (LWP 1004) 0x409778fe in sigsuspend () from /lib/libc.so.6
- 2 Thread 2049 (LWP 1003) 0x40a10d90 in poll () from /lib/libc.so.6
- 1 Thread 1024 (LWP 995) 0x40a10d90 in poll () from /lib/libc.so.6
- </screen>
-
- <para>
- (Notice that, normally, only
- <command>evolution-mail</command> will have more than one
- thread.)
- </para>
-
- <para>
- Now, for each of the thread listed, type the following
- commands:
- </para>
-
- <programlisting>
-thread N
-bt
- </programlisting>
-
- <para>
- Where `N' is the thread number. (In this example, you would
- have to do it with N as 1, 2, 3... 8.) Then cut and paste
- all the output into some text file, and quit
- <command>gdb</command> by typing
- <userinput>quit</userinput>.
- </para>
-
- <para>
- You can also get a stack trace from a running component or a
- component that has just crashed. Just start
- <command>gdb</command> normally and, instead of using the
- <userinput>r</userinput> command, use
- <userinput>attach</userinput> to attach to the running
- process:
- </para>
-
- <programlisting>
-attach PID
- </programlisting>
+ <para>
+ A stack trace is a list of the chain of function calls that
+ lead to some point in the program. Typically, you want to
+ get a stack trace when Evolution crashes or hangs and you
+ want to try to figure out where in the code that happened
+ and why. For this reason, stack traces are extremely
+ useful for the Evolution developers, so it's important that
+ you learn how to get them, and include them in crash
+ reports. Once we have <command>bug-buddy</command> working
+ with our bug database, it will be much easier to do
+ this. Until then, here's how:
+ </para>
+
+ <para>
+ First of all, in order to get a stack trace, your executable
+ (and possibly the libraries) must be compiled with debugging
+ symbols. Debugging symbols are created by default if you
+ compile from CVS, and are included in the snapshot builds.
+ If you decide to compile by yourself with some custom CFLAGS
+ value, make sure <command>-g</command> is included in them.
+ </para>
+
+ <para>
+ Finally, you must put the component that crashes through
+ <command>gdb</command>. Make sure all the components are
+ dead (exit Evolution and <command>killev</command>), then
+ run the following command:
+ </para>
+
+ <programlisting>
+ gdb name-of-component
+ </programlisting>
+
+ <para>
+ Then, at the gdb prompt, type <userinput>r</userinput> (for
+ "run") and wait a few seconds to make sure the component has
+ registered with the name service. Then start Evolution
+ normally from a different terminal.
+ </para>
+
+ <para>
+ Then, reproduce the crash, and go back to the terminal where
+ you ran <command>gdb</command>. If the component crashed,
+ you should have a prompt there; otherwise, just hit
+ <keycombo action=simul>
+ <keycap>Control</keycap>
+ <keycap>C</keycap>
+ </keycombo>.
+ At the prompt, type:
+ </para>
+
+ <programlisting>
+ info threads
+ </programlisting>
+
+ <para>
+ This will give you a list of the current running threads,
+ e.g.
+ </para>
+
+ <screen>
+ (gdb) info threads
+ 8 Thread 6151 (LWP 14908) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 7 Thread 5126 (LWP 14907) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 6 Thread 4101 (LWP 1007) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 5 Thread 3076 (LWP 1006) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 4 Thread 2051 (LWP 1005) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 3 Thread 1026 (LWP 1004) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 2 Thread 2049 (LWP 1003) 0x40a10d90 in poll () from /lib/libc.so.6
+ 1 Thread 1024 (LWP 995) 0x40a10d90 in poll () from /lib/libc.so.6
+ </screen>
+
+ <para>
+ (Notice that, normally, only
+ <command>evolution-mail</command> will have more than one
+ thread.)
+ </para>
+
+ <para>
+ Now, for each of the thread listed, type the following
+ commands:
+ </para>
+
+ <programlisting>
+ thread N
+ bt
+ </programlisting>
+
+ <para>
+ Where `N' is the thread number. (In this example, you would
+ have to do it with N as 1, 2, 3... 8.) Then cut and paste
+ all the output into some text file, and quit
+ <command>gdb</command> by typing
+ <userinput>quit</userinput>.
+ </para>
+
+ <para>
+ You can also get a stack trace from a running component or a
+ component that has just crashed. Just start
+ <command>gdb</command> normally and, instead of using the
+ <userinput>r</userinput> command, use
+ <userinput>attach</userinput> to attach to the running
+ process:
+ </para>
+
+ <programlisting>
+ attach PID
+ </programlisting>
<para>
Where <userinput>PID</userinput> is the PID of the
@@ -630,10 +630,10 @@ attach PID
<sect1 id="faq-features">
<title>Features</title>
- <para>
- Following is a list of questions about the features in
- <application>Evolution</application>.
- </para>
+ <para>
+ Following is a list of questions about the features in
+ <application>Evolution</application>.
+ </para>
<qandaset>
<qandaentry>
@@ -660,7 +660,7 @@ attach PID
</para>
<programlisting>
-rm -rf ~/evolution/local/Inbox/subfolders/Foo
+ rm -rf ~/evolution/local/Inbox/subfolders/Foo
</programlisting>
<para>
@@ -668,7 +668,7 @@ rm -rf ~/evolution/local/Inbox/subfolders/Foo
</para>
</answer>
</qandaentry>
-
+
<qandaentry>
<question>
<para>
@@ -688,7 +688,7 @@ rm -rf ~/evolution/local/Inbox/subfolders/Foo
</para>
<programlisting>
-cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/Bar
+ cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/Bar
</programlisting>
<para>
@@ -699,11 +699,11 @@ cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/
</qandaentry>
<qandaentry>
- <question>
- <para>
- Can I read mail from a mailbox file created by some other
- application (e.g. Mutt) without importing mail from it?
- </para>
+ <question>
+ <para>
+ Can I read mail from a mailbox file created by some other
+ application (e.g. Mutt) without importing mail from it?
+ </para>
</question>
<answer>
<para>
@@ -759,7 +759,7 @@ cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/
for this to work you need the
<filename>gnome-spell</filename> component, which is not
shipped with Ximian GNOME yet.
- </para>
+ </para>
<para>
If you are brave enough, you can check out module
@@ -807,14 +807,14 @@ cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/
GNOME Control Center, go to the "HTML Viewer"
configuration page, which is under the "Document Handlers"
category.
- </para>
+ </para>
</answer>
</qandaentry>
<qandaentry>
<question>
<para>
How do I import my Outlook <filename>.pst</filename> files into Evolution?
- </para>
+ </para>
</question>
<answer>
<para>
@@ -824,7 +824,7 @@ cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/
convert them into the <type>mbox</type> format, which can
then be imported by Evolution.
</para>
-
+
<para>
To start importing your Outlook mail to Evolution, run
Mozilla Mail on Windows and select the
@@ -833,21 +833,21 @@ cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/
Outlook. Once Mozilla has imported all your mail, reboot
your computer into Linux.
</para>
-
+
<para>
Mount your Windows partition in Linux and run Evolution to
begin importing your mail. Select
<menuchoice><guimenu>File</guimenu><guimenuitem>Import
- File...</guimenuitem></menuchoice> to start importing. Set
+ File...</guimenuitem></menuchoice> to start importing. Set
the file type to MBox (mbox) and click on
<guibutton>Browse</guibutton> to select the mail you want
to import.
</para>
-
+
<para>
If you are the only user on Windows, the mail files will
be stored in <filename>/mnt/c/windows/Application
- Data/Mozilla/Profiles/default/XXXX/Mail/imported.mail/</filename>
+ Data/Mozilla/Profiles/default/XXXX/Mail/imported.mail/</filename>
where <filename>/mnt/c/</filename> is your windows
partition mount point and XXXX is some collection of
numbers and digits ending in <filename>.slt</filename>.
@@ -857,14 +857,14 @@ cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/
If there is more than one user, the file will be in
<filename>/mnt/c/windows/Profiles/USERNAME/XXXX/Mail/imported.mail/</filename>
where USERNAME is your Windows username.
- </para>
+ </para>
<para>
For each mail folder in Outlook, Mozilla will convert the
folder into one mbox file. To import all your mail, import
all the files without a <filename>.msf</filename>
extension.
- </para>
+ </para>
</answer>
</qandaentry>
@@ -876,31 +876,14 @@ cp -r ~/evolution/local/Inbox/subfolders/Foo ~/evolution/local/Inbox/subfolders/
</question>
<answer>
<para>
- Mozilla on Windows accesses the <filename>.pst</filename>
- files through the <filename>MAPI.DLL</filename>, which is
- only avaliable on Windows. <filename>MAPI.DLL</filename>
- is the only way to access <filename>.pst</filename> files
- and Evolution cannot use this DLL in Linux.
+ Mozilla on Windows accesses the <filename>.pst</filename>
+ files through the <filename>MAPI.DLL</filename>, which is
+ only avaliable on Windows. <filename>MAPI.DLL</filename>
+ is the only way to access <filename>.pst</filename> files
+ and Evolution cannot use this DLL in Linux.
</para>
</answer>
</qandaentry>
</qandaset>
- </sect1>
- </appendix>
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
+ </sect1>
+</appendix>
diff --git a/help/ChangeLog b/help/ChangeLog
index 6bde52e51c..65402a993e 100644
--- a/help/ChangeLog
+++ b/help/ChangeLog
@@ -1,3 +1,7 @@
+2001-05-23 Ettore Perazzoli <ettore@ximian.com>
+
+ * C/evolution-faq.sgml: Re-indented.
+
2001-05-18 Duncan Mak <duncan@ximian.com>
* C/evolution-faq.sgml: Added two questions about importing Outlook (text from Iain).