aboutsummaryrefslogtreecommitdiffstats
path: root/help/no/evolution-faq.sgml
diff options
context:
space:
mode:
Diffstat (limited to 'help/no/evolution-faq.sgml')
-rw-r--r--help/no/evolution-faq.sgml973
1 files changed, 973 insertions, 0 deletions
diff --git a/help/no/evolution-faq.sgml b/help/no/evolution-faq.sgml
new file mode 100644
index 0000000000..8e658ff308
--- /dev/null
+++ b/help/no/evolution-faq.sgml
@@ -0,0 +1,973 @@
+<!--
+<!DOCTYPE appendix PUBLIC "-//GNOME//DTD DocBook PNG Variant V1.1//EN">
+-->
+<appendix id="evolution-faq">
+ <title>Frequently Asked Questions About Ximian Evolution</title>
+ <para>
+ Here are some frequently asked questions about the
+ <application>Evolution</application> groupware suite from
+ Ximian. If you have a question that's not listed, you can
+ contact us at evolve@ximian.com.
+ </para>
+
+ <sect1 id="faq-features">
+ <title>Features</title>
+
+ <qandaset>
+
+ <qandaentry>
+ <question>
+ <para>
+ How can I use Evolution with Microsoft Exchange or Lotus Notes?
+ </para>
+ </question>
+ <answer>
+ <para>
+ If your server uses standard open protocols like IMAP,
+ LDAP, POP, and SMTP, you can use Evolution with it. You
+ can share addresses with vCards and calendar items with
+ iCal appointments.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ Can I use Evolution with KDE?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Evolution will work fine in KDE. You will need to
+ install all of the GNOME libraries that it depends on.
+ Also, certain configuration options, such as default
+ fonts and the message editor keybinding behavior, must be
+ changed using the GNOME Control Center application (this
+ will also run from within KDE).
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ How can I remove or rename a folder?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Right-click on the folder and select the
+ <guimenuitem>Delete</guimenuitem> or
+ <guimenuitem>Rename</guimenuitem> items.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ Why doesn't drag and drop between folders seem to work?
+ </para>
+ </question>
+ <answer>
+ <para>
+ The implementation isn't finished, although it's nearly done.
+ </para>
+
+ <para>
+ In the meantime, right-click on the folders or messages
+ you want to move, and select the
+ <guimenuitem>Move</guimenuitem> or
+ <guimenuitem>Copy</guimenuitem> options.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ Can I read mail from a mailbox file created by some other
+ application (e.g. Mutt) without importing mail from it?
+ </para>
+ </question>
+ <answer>
+ <para>
+ No, but it's a planned feature.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ Can Evolution sync with my Palm OS (tm) device?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Yes. However, it is not yet stable enough for general
+ release and we do not yet ship Evolution with Palm
+ synchronization enabled default. Until we do, you will
+ need to compile this in yourself. Check the
+ <filename>README</filename> file for additional
+ information on the requirements. Full compatibility and
+ synchronization for calendar and addressbook applications
+ on Palm devices will be implemented and shipped soon.
+ </para>
+ </answer>
+ </qandaentry>
+ <qandaentry>
+ <question>
+ <para>
+ What is the difference between a virtual folder (vfolder)
+ and a regular folder?
+ </para>
+ </question>
+ <answer>
+ <para>
+ A virtual folder is like a saved search: it is a view of
+ your mail. Regular folders actually contain the mail
+ messages. You can have one message be in multiple virtual
+ folders, but only in one regular folder. See the section
+ in the Evolution manual about virtual folders for more
+ information.
+ </para>
+ </answer>
+ </qandaentry>
+ <qandaentry>
+ <question>
+ <para>
+ Can Evolution spell-check messages while I compose them?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Yes. The Evolution composer is able to highlight
+ mis-spelled word on the fly as you type them, and also
+ give you suggestions for possible corrections. In order
+ for this to work you need the
+ <filename>gnome-spell</filename> component, which is not
+ shipped with Ximian GNOME yet.
+ </para>
+
+ <para>
+ If you are brave enough, you can check out module
+ <filename>gnome-spell</filename> from the GNOME CVS and
+ compile it yourself. Check out its README file for a list
+ of <filename>gnome-spell</filename>'s requirements for
+ compilation.
+ </para>
+
+ <para>
+ Note that you don't need to recompile Evolution after
+ installing <filename>gnome-spell</filename>; it will be
+ picked up automatically.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ Why can't I see the images that are contained in some HTML
+ mail messages.
+ </para>
+ </question>
+ <answer>
+ <para>
+ Evolution currently doesn't support this, but it's a
+ planned feature. It will be an option: many people like
+ to turn off the images because they use up bandwidth and can
+ be used to spy on your email reading habits.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ Can I change the font that Evolution uses to compose and
+ display mail messages?
+ </para>
+ </question>
+ <answer>
+ <para>
+ You have to change the GtkHTML settings for that: in the
+ GNOME Control Center, go to the "HTML Viewer"
+ configuration page, which is under the "Document Handlers"
+ category.
+ </para>
+ </answer>
+ </qandaentry>
+ <qandaentry>
+ <question>
+ <para>
+ How do I import my Outlook <filename>.pst</filename> files into Evolution?
+ </para>
+ </question>
+ <answer>
+ <para>
+ You cannot import these files directly into Evolution
+ because the <filename>.pst</filename> format is a
+ proprietary format. However, Mozilla Mail on Windows can
+ convert them into the <type>mbox</type> format, which can
+ then be imported by Evolution.
+ </para>
+
+ <para>
+ To start importing your Outlook mail to Evolution, run
+ Mozilla Mail on Windows and select the
+ <menuchoice><guimenu>File</guimenu><guimenuitem>Import...</guimenuitem></menuchoice>
+ to begin. Then select that you wish to import Mail from
+ Outlook. Once Mozilla has imported all your mail, reboot
+ your computer into Linux.
+ </para>
+
+ <para>
+ Mount your Windows partition in Linux and run Evolution to
+ begin importing your mail. Select
+ <menuchoice><guimenu>File</guimenu><guimenuitem>Import
+ File...</guimenuitem></menuchoice> to start importing. Set
+ the file type to MBox (mbox) and click on
+ <guibutton>Browse</guibutton> to select the mail you want
+ to import.
+ </para>
+
+ <para>
+ If you are the only user on Windows, the mail files will
+ be stored in <filename>/mnt/c/windows/Application
+ Data/Mozilla/Profiles/default/XXXX/Mail/imported.mail/</filename>
+ where <filename>/mnt/c/</filename> is your windows
+ partition mount point and XXXX is some collection of
+ numbers and digits ending in <filename>.slt</filename>.
+ </para>
+
+ <para>
+ If there is more than one user, the file will be in
+ <filename>/mnt/c/windows/Profiles/USERNAME/XXXX/Mail/imported.mail/</filename>
+ where USERNAME is your Windows username.
+ </para>
+
+ <para>
+ For each mail folder in Outlook, Mozilla will convert the
+ folder into one mbox file. To import all your mail, import
+ all the files without a <filename>.msf</filename>
+ extension.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ If Mozilla can import <filename>.pst</filename> files, why can't Evolution?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Mozilla on Windows accesses the <filename>.pst</filename>
+ files through the <filename>MAPI.DLL</filename>, which is
+ only available on Windows. <filename>MAPI.DLL</filename>
+ is the only way to access <filename>.pst</filename> files
+ and Evolution cannot use this DLL in Linux.
+ </para>
+ </answer>
+ </qandaentry>
+ <qandaentry>
+ <question>
+ <para>
+ Will there be an Evolution server? How about a text-based or web-based front end?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Of course, we can't comment on unannounced future product
+ plans, but Evolution's architecture would permit the
+ existence of that kind of software. If there is enough
+ demand for such software we will consider moving in that
+ direction.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ Will Evolution make a good mocha?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Only espresso is planned, but you can easily plug in a chocolate component.
+ </para>
+ </answer>
+ </qandaentry>
+
+ </qandaset>
+ </sect1>
+
+
+ <!-- Section: Getting and compiling -->
+
+ <sect1 id="faq-get-and-compile">
+ <title>
+ Getting and Compiling Evolution
+ </title>
+ <qandaset>
+ <qandaentry>
+ <question>
+ <para>
+ Where can I get the latest Evolution release?
+ </para>
+ </question>
+ <answer>
+ <para>
+ There are two ways to install the latest Evolution
+ release:
+ <itemizedlist>
+ <listitem>
+ <para>
+ If you have Ximian GNOME installed, you can start
+ Red Carpet, Ximian's software updating system, and
+ subscribe to the Evolution channel. This will let
+ you install a binary for the latest release, and
+ will also warn you when a new version has been made
+ available.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ If you want to compile from source, you can
+ download the latest official Evolution tarball
+ from:
+ </para>
+
+ <para>
+ <ulink url="ftp://ftp.gnome.org/pub/GNOME/unstable/sources/evolution">
+ ftp://ftp.gnome.org/pub/GNOME/unstable/sources/evolution</ulink>
+ </para>
+ </listitem>
+ </itemizedlist>
+ </para>
+ </answer>
+ </qandaentry>
+ <qandaentry>
+ <question>
+ <para>
+ Are binary snapshots available?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Yes, if you have Ximian GNOME installed. Just run Red
+ Carpet and subscribe to the Evolution Snapshot channel.
+ </para>
+
+ <para>
+ You can check the status of snapshots at
+ <ulink url="http://primates.ximian.com/~snapshot">http://primates.ximian.com/~snapshot</ulink>.
+ </para>
+ </answer>
+ </qandaentry>
+ <qandaentry>
+ <question>
+ <para>
+ Why isn't a new snapshot available today?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Sometimes the build might fail because of problems with
+ the source on CVS. In this case, just wait for next day's
+ snapshot.
+ </para>
+ </answer>
+ </qandaentry>
+ <qandaentry>
+ <question>
+ <para>
+ How do I get Evolution from CVS?
+ </para>
+ </question>
+ <answer>
+ <para>
+ If you already have
+ <ulink url="http://cvs.gnome.org">GNOME CVS</ulink> access,
+ simply check out the following modules: evolution,
+ gtkhtml, gal.
+ </para>
+ <para>
+ If you don't have a CVS account, you can use anoncvs
+ instead. Bear in mind that anoncvs is only synchronized once
+ a day, and code received from anoncvs may not be latest
+ version available.
+ </para>
+
+ <para>
+ Before using the anoncvs server, you have to log into it.
+ This only needs to be done once. Use this command:
+ </para>
+
+ <programlisting>
+ cvs -z3 -d :pserver:anonymous@anoncvs.gnome.org:/cvs/gnome login
+ </programlisting>
+
+ <para>
+ Then you can retrieve the modules needed to compile Evolution
+ using the following command:
+ </para>
+
+ <programlisting>
+ cvs -z3 -d :pserver:anonymous@anoncvs.gnome.org:/cvs/gnome co evolution gtkhtml gal
+ </programlisting>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ How should I compile Evolution avoiding conflicts with my
+ existing GNOME installation?
+ </para>
+ </question>
+ <answer>
+ <para>
+ The best way is to install Evolution into a separate prefix.
+ In order to specify a non-default installation prefix, you
+ can pass the <parameter>--prefix</parameter> option to
+ <filename>configure</filename> or
+ <filename>autogen.sh</filename>. For example:
+ </para>
+
+ <programlisting>
+ cd /cvs/evolution
+ ./autogen.sh --prefix=/opt/gnome
+ </programlisting>
+
+ <para>
+ If you install Evolution and the Evolution libraries in a
+ non-standard prefix, make sure you set the appropriate
+ environment variables in the startup script for Evolution:
+ </para>
+
+ <programlisting>
+ export PATH=/opt/gnome:$PATH
+ export GNOME_PATH=/opt/gnome:/usr
+ </programlisting>
+
+ <para>
+ You may also need to add <filename>$prefix/lib</filename>
+ (e.g. <filename>/opt/gnome/lib</filename>) to your
+ <filename>/etc/ld.so.conf</filename>. Of course, this will
+ not work for systems which do not use ld.so.conf, such as
+ HP-UX.
+ </para>
+ </answer>
+ </qandaentry>
+ <qandaentry>
+ <question>
+ <para>
+ I get the error message: <computeroutput>make: *** No rule
+ to make target
+ `all-no-@BUILD_INCLUDED_LIBINTL@'</computeroutput>
+ </para>
+ </question>
+ <answer>
+ <para>
+ You probably have <filename>gettext</filename> 0.10.36 or
+ later installed. Try downgrading to 0.10.35;
+ unfortunately, 0.10.36 introduced some incompatibilities
+ with the current <filename>xml-i18n-tools</filename>.
+ </para>
+ </answer>
+ </qandaentry>
+ </qandaset>
+ </sect1>
+
+ <sect1 id="faq-trouble">
+ <title>Troubleshooting</title>
+ <qandaset>
+ <qandaentry>
+ <question>
+ <para>
+ I get <computeroutput>Cannot initialize the Evolution
+ shell</computeroutput>.
+ </para>
+ </question>
+ <answer>
+ <para>
+ There are a number of things that can cause this error.
+ Check that:
+ </para>
+
+ <itemizedlist>
+ <listitem>
+ <para>
+ <filename>oafd</filename> is listed in your <envar>PATH</envar>
+ environment variable.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <filename>GNOME_Evolution_Shell.oaf</filename> and
+ the other      
+ <filename>GNOME_Evolution_*.oaf</filename> files are
+ readable and installed in
+ <filename>$prefix/share/oaf</filename>, where
+ <filename>$prefix</filename> is one of the prefixes
+ listed in <envar>GNOME_PATH</envar> or
+ <envar>OAF_INFO_PATH</envar>.  (These variables are
+ supposed to contain $PATH-like colon-separated lists of
+ paths.  If the installation prefix for Evolution is
+ different from that). Run `oaf-slay' once before running
+ `evolution' again if you change $GNOME_PATH or
+ $OAF_INFO_PATH.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ <filename>evolution</filename>,
+ <filename>evolution-mail</filename> and the other
+ <filename>evolution-*</filename> executables are in your
+ $PATH.
+ </para>
+ </listitem>
+ </itemizedlist>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ I get <computeroutput>Cannot open composer window</computeroutput>.
+ </para>
+ </question>
+ <answer>
+ <para>
+ This actually means that Evolution cannot activate the HTML
+ editor component from GtkHTML. The comments in the previous
+ answer still apply; also make sure that
+ <command>gnome-gtkhtml-editor</command> is in your
+ <envar>PATH</envar>.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ The address suggestion list steals focus from the "To:"
+ entry box when I'm typing. How can I make it keep focus?
+ </para>
+ </question>
+ <answer>
+ <para>
+ This is a bug in GTK version 1.2.10. To avoid it, downgrade
+ to GTK version 1.2.9, or install the Ximian version of GTK
+ 1.2.10.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ I updated Evolution and now my addressbook information is gone!
+ What should I do?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Evolution uses the <filename>libdb</filename> library to
+ handle the addressbook database. Two versions of
+ <filename>libdb</filename> can be used with Evolution: version
+ 1.88 and version 2.
+ </para>
+
+ <para>
+ Unfortunately, an Evolution executable that is linked against
+ a certain version of <filename>libdb</filename> will only be
+ able to read addressbook files written by another Evolution
+ executable that is linked with the same version of the
+ library. If your addressbook is not readable by Evolution
+ anymore, it probably means that you used to have Evolution
+ linked with a certain version of <filename>libdb</filename>,
+ but now it gets linked to a different version.
+ </para>
+
+ <para>
+ Because of the way <filename>libdb</filename> is designed, it
+ is not easy for Evolution to automatically do the conversion
+ between the two formats. But, if your Evolution used to be
+ linked against version 1.85 and now is linked to version 2,
+ there is a very simple way to convert the database and recover
+ your data.
+ </para>
+
+ <itemizedlist>
+
+ <listitem>
+ <para>
+ First of all, check the format of the database using the
+ <command>file</command> command:
+ </para>
+
+ <programlisting>
+ file ~/evolution/local/Contacts/addressbook.db
+ </programlisting>
+
+ <para>
+ You want version 1.85 there. If your version is 2, then
+ your current Evolution is probably linked against
+ version 1.85 and you cannot convert the database to the
+ old format. To do that, follow these instructions:
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Quit Evolution.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Make a copy of the addressbook database for backup
+ purposes, then move the original out of the way.
+ </para>
+
+ <programlisting>
+ cd ~/evolution/local/Contacts
+ cp addressbook.db addressbook.db.backup
+ mv addressbook.db addressbook.db.tmp
+ </programlisting>
+ </listitem>
+
+ <listitem>
+ <para>
+ Convert the contacts to the new format using
+ <command>db_dump185</command> and
+ <command>db_load</command>:
+ </para>
+
+ <programlisting>
+ db_dump185 addressbook.db.tmp | db_load ~/evolution/local/Contacts/addressbook.db
+ </programlisting>
+ </listitem>
+
+ <listitem>
+ <para>
+ Restart Evolution.
+ </para>
+ </listitem>
+
+ </itemizedlist>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ Evolution reported an error when trying to retrieve from my
+ local spool in <filename>/var/spool/mail/username</filename>. Why?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Evolution doesn't have an external helper for moving mail,
+ so <filename>/var/spool/mail/</filename> must be writable
+ by you. Try this:
+ </para>
+
+ <programlisting>
+ chmod 1777 /var/spool/mail
+ </programlisting>
+
+ <para>
+ We're working on a solution to this problem now.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ Evolution crashes reporting that it couldn't allocate N
+ billion bytes; how do I fix this?
+ </para>
+ </question>
+ <answer>
+ <para>
+ This usually happens when a component tries talking a
+ certain version of a CORBA interface to another component
+ that supports a different version. For example, this can
+ happen when you recompile and install a single component
+ without recompiling/installing the rest of Evolution.
+ </para>
+
+ <para>
+ If you run into this problem, make sure all the components
+ are compiled and installed at the same time. This also
+ applies to GtkHTML upgrades; after upgrading and
+ installing a newer GtkHTML, always re-compile and
+ re-install Evolution against it.
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ What is <command>killev</command> and why do I need to use it?
+ </para>
+ </question>
+ <answer>
+ <para>
+ Evolution is actually made up of several components that run
+ as separate processes. Evolution's shell is not very good
+ at cleaning up stale processes, so it is possible that
+ sometimes already-running components cause unexpected and/or
+ broken behavior.
+ </para>
+
+ <para>
+ It's always a good idea to run <command>killev</command>
+ after a crash in Evolution, especially if the Evolution
+ shell itself crashed. (If a component crashes instead, you
+ should try to exit the shell cleanly first, so you give a
+ chance to the other components to clean things up properly.)
+ </para>
+ </answer>
+ </qandaentry>
+
+ <qandaentry>
+ <question>
+ <para>
+ What is <command>oaf-slay</command> and why do I need to use it?
+ </para>
+ </question>
+ <answer>
+ <para>
+ <command>oaf-slay</command> is an utility which comes with
+ OAF, the Object Activation Framework that is used in the
+ GNOME Desktop to activate components. It will kill the
+ object activation daemon (<command>oafd</command>) as well
+ as all the active components on the system.
+ </para>
+
+ <para>
+ Using <command>oaf-slay</command>
+ <command>oaf-slay</command> is quite drastic and can cause
+ problems with other programs that use oaf, especially with
+ <application>Nautilus</application>. To avoid problems, do
+ not run <command>oaf-slay</command> while you are in GNOME.
+ </para>
+ </answer>
+ </qandaentry>
+ </qandaset>
+ </sect1>
+
+ <sect1 id="faq-debugging">
+ <title>Questions about Bugs and Debugging</title>
+ <para>
+ Find a bug? Here's how to help us fix it!
+ </para>
+
+ <qandaset>
+ <qandaentry>
+ <question>
+ <para>
+ Where should I report bugs for Evolution?
+ </para>
+ </question>
+ <answer>
+ <para>
+ You can use the GNOME Bug Report Tool
+ (<command>bug-buddy</command>), or report bugs to the
+ Ximian bug reporting system (Bugzilla), located at <ulink
+ url="http://bugzilla.ximian.com">http://bugzilla.ximian.com</ulink>.
+ </para>
+
+ <para>
+ Please use the query function to check if a bug has been
+ submitted already, so that we avoid duplicate reports.
+ </para>
+ </answer>
+ </qandaentry>
+
+
+ <qandaentry>
+ <question>
+ <para>
+ What is a stack trace (backtrace) and how do I get one?
+ </para>
+ </question>
+ <answer>
+ <para>
+ A stack trace is a list of the chain of function calls
+ that lead to some point in the program. Typically, you
+ want to get a stack trace when Evolution crashes or
+ hangs and you want to try to figure out where in the
+ code that happened and why. For this reason, stack
+ traces are extremely useful for the Evolution
+ developers, so it's important that you learn how to get
+ them, and include them in crash reports. The
+ <application>bug-buddy</application> tool can get and
+ submit a stack trace for you. If you want to do it by
+ yourself, here's how:
+ </para>
+ <para>
+ First of all, in order to get a stack trace, your
+ executable (and possibly the libraries) must be compiled
+ with debugging symbols. Debugging symbols are created by
+ default if you compile from CVS, and are included in the
+ snapshot builds. If you decide to compile by yourself
+ with some custom CFLAGS value, make sure -g is included
+ in them.
+ </para>
+ <para>
+ Finally, you must put the component that crashes through
+ <application>gdb</application>, the GNU debugging tool.
+ To do so, make sure all the components are dead (exit
+ Evolution and run <command>killev</command>), then run the
+ following command:
+ <programlisting>
+ <command>gdb name-of-component</command>
+ </programlisting>
+
+ Where "name-of-component" is the name of the component that
+ crashed.
+ </para>
+ <para>
+ Then, at the gdb prompt, type r (for "run") and wait a
+ few seconds to make sure the component has registered
+ with the name service. Then start
+ <application>Evolution</application> normally from a
+ different terminal.
+ </para>
+ <para>
+ When you have started
+ <application>Evolution</application>, reproduce the
+ crash, and go back to the terminal where you ran gdb. If
+ the component crashed, you should have a prompt there;
+ otherwise, just hit Control+C. At the prompt, type
+ <command>info threads</command>. This will give you a
+ screen that looks like this:
+ </para>
+ <para>
+ <programlisting>
+(gdb) info threads
+ 8 Thread 6151 (LWP 14908) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 7 Thread 5126 (LWP 14907) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 6 Thread 4101 (LWP 1007) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 5 Thread 3076 (LWP 1006) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 4 Thread 2051 (LWP 1005) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 3 Thread 1026 (LWP 1004) 0x409778fe in sigsuspend () from /lib/libc.so.6
+ 2 Thread 2049 (LWP 1003) 0x40a10d90 in poll () from /lib/libc.so.6
+ 1 Thread 1024 (LWP 995) 0x40a10d90 in poll () from /lib/libc.so.6
+ </programlisting>
+
+ For the most part, only
+ <application>evolution-mail</application> will have more
+ than one thread.
+ </para>
+ <para>
+ Now, for each of the threads listed, type the following commands:
+<programlisting>
+thread N
+bt
+</programlisting>
+ Where 'N' is the number of the thread (in this example, 1
+ through 8).
+ </para>
+ <para>
+ Cut and paste all the output gdb gives you into a text
+ file. You can quit gdb by typing
+ <userinput>quit</userinput>
+ </para>
+ <para>
+ If you prefer, you can start gdb while a process is
+ running. You'll want to do this right after a crash dialog
+ appears, but before hitting "OK" or "Submit bug report".
+ Start <application>gdb</application> as above, but instead
+ of using <userinput>r</userinput>, type <userinput>attach
+ PID</userinput> where PID is the process ID of the
+ component you want to debug.
+ </para>
+ <para>
+ If that sounds too complicated, you can always use
+ <command>bug-buddy</command> to get and submit the stack
+ trace.
+ </para>
+ </answer>
+ </qandaentry>
+ <qandaentry>
+ <question>
+ <para>
+ A component of evolution crashed, but since the rest of
+ evolution stayed up, I couldn't use bug-buddy to get a
+ stack trace. How can I use gdb to get a stack trace of
+ the component?
+ </para>
+ </question>
+ <answer>
+ <para>
+ To trace a failing component (in this example, evolution-mail):
+ <orderedlist numeration="arabic">
+ <listitem>
+ <para>
+ Open two terminals.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ In one, type <command>gdb evolution-mail</command>
+ . Replace "evolution-mail" with the name of the
+ component that is crashing: evolution-addressbook,
+ evolution-calendar, etc.)
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ Once gdb starts, type <userinput>r</userinput> and
+ hit enter. Give it a few seconds, to make sure it
+ starts up completely.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ In the second terminal, type
+ <command>evolution</command>. Do whatever you did
+ to cause the crash in the component you used in
+ step two.
+ </para>
+ </listitem>
+ <listitem>
+ <para>
+ When the crash occurs, type 'bt' in the first
+ terminal.
+ </para>
+ </listitem>
+
+ <listitem>
+ <para>
+ Cut and paste the output into your bug report.
+ </para>
+ </listitem>
+ </orderedlist>
+ </para>
+ </answer>
+ </qandaentry>
+ </qandaset>
+ </sect1>
+ </appendix>
+
+<!-- Local Variables: --> <!-- indent-tabs-mode:nil --> <!-- End: -->
+
+
+
+