+ * C/evo_book_0.1.sgml: removed.

+
+	* C/apx-authors.sgml: new file.
+	* C/apx-bugs.sgml: same.
+	* C/apx-fdl.sgml: same.
+	* C/config-prefs.sgml: same.
+	* C/config-setupassist.sgml: same.
+	* C/config-sync.sgml: same.
+	* C/devel-action.sgml: same.
+	* C/devel-component.sgml: same.
+	* C/devel-script.sgml: same.
+	* C/evolution-guide.sgml: same.
+	* C/preface.sgml: same.
+	* C/usage-calendar.sgml: same.
+	* C/usage-contact.sgml: same.
+	* C/usage-mail.sgml: same.
+	* C/usage-mainwindow.sgml: same.
+	* C/usage-setup.sgml: same.
+	* C/usage-sync.sgml: same.

svn path=/trunk/; revision=3125

18 files changed, 2731 insertions, 449 deletions

diff --git a/doc/C/apx-authors.sgml b/doc/C/apx-authors.sgml
new file mode 100644
index 0000000000..f68b395c9f
--- /dev/null
+++ b/doc/C/apx-authors.sgml
@@ -0,0 +1,70 @@
+
+  <appendix id="authors">
+    <title>Authors</title>
+     <para>
+      <application>Evolution</application> was written by:
+
+      Seth Alves: <email>alves@helixcode.com</email>
+      Anders Carlsson<email>andersca@helixcode.com</email>
+      Damon Chaplin:<email>damon@helixcode.com</email>
+      Clifford R. Conover <email>rusty@zootweb.com</email>
+      Miguel De Icaza: <email>miguel@helixcode.com</email>
+      Arturo Espinoza <email>arturo@nucleu.unam.mx</email>
+      Larry Ewing: <email>lewing@helixcode.com</email>
+      Bertrand Guiheneuf: <email>bertrand@helixcode.com</email>
+      Tuomas Kuosmanen: <email>tigert@gimp.org</email>
+      Christopher J. Lahey: <email>clahey@helixcode.com</email>
+      Matthew Loper:  <email>matt@helixcode.com</email>
+      Dave Mason <email>dcm@redhat.com</email>
+      Federico Mena: <email>federico@helixcode.com</email>
+      Eskil Heyn Olsen<email>deity@eski.dk</email>
+      Nat Friedman: <email>nat@helixcode.com</email>
+      Ettore Perazzoli:<email>ettore@helixcode.com</email>
+      Russell Steinthal: <email>rms39@columbia.edu</email>
+      Peter Teichman: <email>peter@helixcode.com</email>      
+      Chris Toshok: <email>toshok@helixcode.com</email>
+      Radek Doulik: <email>rodo@helixcode.com</email>
+      Dan Winship: <email>winship@helixcode.com</email>
+      Michael Zucchi: <email>notzed@helixcode.com</email>
+
+and other dedicated GNOME programmers. 
+</para>
+    <para>
+      The <application>Evolution</application> code owes a great debt
+       to the <application>GNOME-pim</application> and
+       <application>GNOME-Calendar</application> applications, and to
+       <application>KHTMLW</application>.  The developers of
+       <application>Evolution</application> acknowledge the efforts
+       and contributions of all who worked on those projects.
+    </para>
+
+   <para>
+     For more information please visit the
+      <application>Evolution</application> <ulink
+      url="http://www.helixcode.com/apps/evolution.php3"
+      type="http">Web page</ulink>.  Please send all comments,
+      suggestions, and bug reports to the <ulink
+      url="http://bugs.gnome.org" type="http">GNOME bug tracking
+      database</ulink>. Instructions for submitting bug reports can be
+      found on-line at <ulink
+      url="http://bugs.gnome.org/Reporting.html" type="http">
+      http://bugs.gnome.org/Reporting.html</ulink>. If you are using
+      GNOME 1.1 or later, you can also use command
+      <command>bug-buddy</command> for submitting bug reports.
+    </para>
+    <para>
+      This manual was written by Aaron Weber
+      (<email>aaron@helixcode.com</email>) with the help of the
+      application programmers and the GNOME Documentation Project.
+      Please send all comments and suggestions regarding the manual to
+      the GNOME Documentation Project at
+      <email>docs@gnome.org</email>. You can also add your comments
+      online by using <ulink type="http"
+      url="http://www.gnome.org/gdp/doctable/">GNOME Documentation
+      Status Table</ulink>.
+    </para>
+    <!-- For translations: uncomment this: <para> Latin translation
+      was done by ME (<email>MYNAME@MYADDRESS</email>). Please send
+      all comments and suggestions regarding this translation to
+      SOMEWHERE.  </para> -->
+    </appendix>
diff --git a/doc/C/apx-bugs.sgml b/doc/C/apx-bugs.sgml
new file mode 100644
index 0000000000..eb30901422
--- /dev/null
+++ b/doc/C/apx-bugs.sgml
@@ -0,0 +1,19 @@
+ <appendix id="bugs">
+   
+    <title>Known bugs and limitations</title>
+    <abstract>
+    <para>
+     This appendix describes known bugs and limitations of
+    <application>Evolution</application>.  Please contact the
+    Evolution team (<email>bugs@helixcode.com</email>) or use
+    <application>bug-buddy</application> if you find one we have not
+    listed, or if you have a patch to fix one.
+    </para>
+    </abstract>
+
+    <para>
+      The bugs are many, but the application is young, and this is to
+      be expected.
+    </para>
+  </appendix>
+
diff --git a/doc/C/apx-fdl.sgml b/doc/C/apx-fdl.sgml
new file mode 100644
index 0000000000..7a85c6e4a2
--- /dev/null
+++ b/doc/C/apx-fdl.sgml
@@ -0,0 +1,678 @@
+<appendix id="fdl" label="Appendix - C">
+  <title>GNU Free Documentation License</title>
+  <para>
+    Version 1.1, March 2000
+  </para>
+  
+  <para>
+    Copyright &copy; 2000 
+    <address>
+      Free Software Foundation, Inc. 
+      <street>59 Temple Place, Suite 330</street>, 
+      <city>Boston</city>, 
+      <state>MA</state>  
+      <postcode>02111-1307</postcode>  
+      <country>USA</country>
+    </address> 
+    Everyone is permitted to copy and distribute verbatim copies of this license
+    document, but changing it is not allowed.
+  </para>
+  
+  <variablelist>
+    <varlistentry id="fdl-preamble">
+      <term>0. PREAMBLE</term>
+      <listitem>
+	<para>
+	  The purpose of this License is to make a manual, textbook, or other
+	  written document "free" in the sense of freedom: to assure everyone
+	  the effective freedom to copy and redistribute it, with or without
+	  modifying it, either commercially or noncommercially. Secondarily,
+	  this License preserves for the author and publisher a way to get
+	  credit for their work, while not being considered responsible for
+	  modifications made by others.
+	</para>
+	
+	<para>
+	  This License is a kind of "copyleft", which means that derivative
+	  works of the document must themselves be free in the same sense. It
+	  complements the GNU General Public License, which is a copyleft
+	  license designed for free software.
+	</para>
+	
+	<para>
+	  We have designed this License in order to use it for manuals for free
+	  software, because free software needs free documentation: a free
+	  program should come with manuals providing the same freedoms that the
+	  software does. But this License is not limited to software manuals; it
+	  can be used for any textual work, regardless of subject matter or
+	  whether it is published as a printed book. We recommend this License
+	  principally for works whose purpose is instruction or reference.
+	</para>
+      </listitem>
+    </varlistentry>
+    <varlistentry id="fdl-section1">
+      <term>1. APPLICABILITY AND DEFINITIONS</term>
+      <listitem>
+	<para id="fdl-document">
+	  This License applies to any manual or other work that contains a
+	  notice placed by the copyright holder saying it can be distributed
+	  under the terms of this License. The <link
+	  linkend="fdl-document">"Document" </link>, below, refers to any such
+	  manual or work. Any member of the public is a licensee, and is
+	  addressed as "you".
+	</para>
+	
+	<para id="fdl-modified">
+	  A <link linkend="fdl-modified">"Modified Version"</link> of the
+	  Document means any work containing the Document or a portion of it,
+	  either copied verbatim, or with modifications and/or translated into
+	  another language.
+	</para>
+	
+	<para id="fdl-secondary">
+	  A <link linkend="fdl-secondary">"Secondary Section"</link> is a named
+	  appendix or a front-matter section of the <link
+	  linkend="fdl-document">Document</link> that deals exclusively with the
+	  relationship of the publishers or authors of the <link
+	  linkend="fdl-document"> Document</link> to the <link
+	  linkend="fdl-document"> Document's</link> overall subject (or to
+	  related matters) and contains nothing that could fall directly within
+	  that overall subject. (For example, if the <link
+	  linkend="fdl-document">Document</link> is in part a textbook of
+	  mathematics, a <link linkend="fdl-secondary">Secondary Section</link>
+	  may not explain any mathematics.)  The relationship could be a matter
+	  of historical connection with the subject or with related matters, or
+	  of legal, commercial, philosophical, ethical or political position
+	  regarding them.
+	</para>
+
+	<para id="fdl-invariant">
+	  The <link linkend="fdl-invariant">"Invariant Sections"</link> are
+	  certain <link linkend="fdl-secondary"> Secondary Sections</link> whose
+	  titles are designated, as being those of <link
+	  linkend="fdl-invariant">Invariant Sections</link>, in the notice that
+	  says that the <link linkend="fdl-document">Document</link> is released
+	  under this License.
+	</para>
+
+	<para id="fdl-cover-texts">
+	  The <link linkend="fdl-cover-texts">"Cover Texts"</link> are certain
+	  short passages of text that are listed, as <link
+	  linkend="fdl-cover-texts">Front-Cover Texts</link> or <link
+	  linkend="fdl-cover-texts">Back-Cover Texts</link>, in the notice that
+	  says that the <link linkend="fdl-document">Document</link> is released
+	  under this License.
+	</para>
+	
+	<para id="fdl-transparent">
+	  A <link linkend="fdl-transparent">"Transparent"</link> copy of the
+	  <link linkend="fdl-document"> Document</link> means a machine-readable
+	  copy, represented in a format whose specification is available to the
+	  general public, whose contents can be viewed and edited directly and
+	  straightforwardly with generic text editors or (for images composed of
+	  pixels) generic paint programs or (for drawings) some widely available
+	  drawing editor, and that is suitable for input to text formatters or
+	  for automatic translation to a variety of formats suitable for input
+	  to text formatters. A copy made in an otherwise <link
+	  linkend="fdl-transparent"> Transparent</link> file format whose markup
+	  has been designed to thwart or discourage subsequent modification by
+	  readers is not <link linkend="fdl-transparent">Transparent</link>.  A
+	  copy that is not <link linkend="fdl-transparent">"Transparent"</link>
+	  is called "Opaque".
+	</para>
+	
+	<para>
+	  Examples of suitable formats for <link
+	  linkend="fdl-transparent">Transparent</link> copies include plain
+	  ASCII without markup, Texinfo input format, LaTeX input format, SGML
+	  or XML using a publicly available DTD, and standard-conforming simple
+	  HTML designed for human modification. Opaque formats include
+	  PostScript, PDF, proprietary formats that can be read and edited only
+	  by proprietary word processors, SGML or XML for which the DTD and/or
+	  processing tools are not generally available, and the
+	  machine-generated HTML produced by some word processors for output
+	  purposes only.
+	</para>
+	
+	<para id="fdl-title-page">
+	  The <link linkend="fdl-title-page">"Title Page"</link> means, for a
+	  printed book, the title page itself, plus such following pages as are
+	  needed to hold, legibly, the material this License requires to appear
+	  in the title page. For works in formats which do not have any title
+	  page as such, <link linkend="fdl-title-page"> "Title Page"</link>
+	  means the text near the most prominent appearance of the work's title,
+	  preceding the beginning of the body of the text.
+	</para>
+      </listitem>
+    </varlistentry>
+    
+    <varlistentry id="fdl-section2">
+      <term>2. VERBATIM COPYING</term>
+      <listitem>
+	<para>
+	  You may copy and distribute the <link
+	  linkend="fdl-document">Document</link> in any medium, either
+	  commercially or noncommercially, provided that this License, the
+	  copyright notices, and the license notice saying this License applies
+	  to the <link linkend="fdl-document">Document</link> are reproduced in
+	  all copies, and that you add no other conditions whatsoever to those
+	  of this License. You may not use technical measures to obstruct or
+	  control the reading or further copying of the copies you make or
+	  distribute. However, you may accept compensation in exchange for
+	  copies. If you distribute a large enough number of copies you must
+	  also follow the conditions in <link linkend="fdl-section3">section
+	  3</link>.
+	</para>
+	
+	<para>
+	  You may also lend copies, under the same conditions stated above, and
+	  you may publicly display copies.
+	</para>
+      </listitem>
+    </varlistentry>
+    
+    <varlistentry id="fdl-section3">
+      <term>3. COPYING IN QUANTITY</term>
+      <listitem>
+	<para>
+	  If you publish printed copies of the <link
+	  linkend="fdl-document">Document</link> numbering more than 100, and
+	  the <link linkend="fdl-document">Document's</link> license notice
+	  requires <link linkend="fdl-cover-texts">Cover Texts</link>, you must
+	  enclose the copies in covers that carry, clearly and legibly, all
+	  these <link linkend="fdl-cover-texts">Cover Texts</link>:  Front-Cover
+	  Texts on the front cover, and Back-Cover Texts on the back cover. Both
+	  covers must also clearly and legibly identify you as the publisher of
+	  these copies. The front cover must present the full title with all
+	  words of the title equally prominent and visible. You may add other
+	  material on the covers in addition. Copying with changes limited to
+	  the covers, as long as they preserve the title of the <link
+	  linkend="fdl-document">Document</link> and satisfy these conditions,
+	  can be treated as verbatim copying in other respects.
+	</para>
+	
+	<para>
+	  If the required texts for either cover are too voluminous to fit
+	  legibly, you should put the first ones listed (as many as fit
+	  reasonably) on the actual cover, and continue the rest onto adjacent
+	  pages.
+	</para>
+	
+	<para>
+	  If you publish or distribute <link
+	  linkend="fdl-transparent">Opaque</link> copies of the <link
+	  linkend="fdl-document">Document</link> numbering more than 100, you
+	  must either include a machine-readable <link
+	  linkend="fdl-transparent">Transparent</link> copy along with each
+	  <link linkend="fdl-transparent">Opaque</link> copy, or state in or
+	  with each <link linkend="fdl-transparent">Opaque</link> copy a
+	  publicly-accessible computer-network location containing a complete
+	  <link linkend="fdl-transparent"> Transparent</link> copy of the <link
+	  linkend="fdl-document">Document</link>, free of added material, which
+	  the general network-using public has access to download anonymously at
+	  no charge using public-standard network protocols. If you use the
+	  latter option, you must take reasonably prudent steps, when you begin
+	  distribution of <link linkend="fdl-transparent">Opaque</link> copies
+	  in quantity, to ensure that this <link
+	  linkend="fdl-transparent">Transparent</link> copy will remain thus
+	  accessible at the stated location until at least one year after the
+	  last time you distribute an <link
+	  linkend="fdl-transparent">Opaque</link> copy (directly or through your
+	  agents or retailers) of that edition to the public.
+	</para>
+	
+	<para>
+	  It is requested, but not required, that you contact the authors of the
+	  <link linkend="fdl-document">Document</link> well before
+	  redistributing any large number of copies, to give them a chance to
+	  provide you with an updated version of the <link
+	  linkend="fdl-document">Document</link>.
+	</para>
+      </listitem>
+    </varlistentry>
+    
+    <varlistentry id="fdl-section4">
+      <term>4. MODIFICATIONS</term>
+      <listitem>
+	<para>
+	  You may copy and distribute a <link linkend="fdl-modified">Modified
+	  Version</link> of the <link linkend="fdl-document">Document</link>
+	  under the conditions of sections <link linkend="fdl-section2">2</link>
+	  and <link linkend="fdl-section3">3</link> above, provided that you
+	  release the <link linkend="fdl-modified">Modified Version</link> under
+	  precisely this License, with the <link linkend="fdl-modified">Modified
+	  Version</link> filling the role of the <link
+	  linkend="fdl-document">Document</link>, thus licensing distribution
+	  and modification of the <link linkend="fdl-modified">Modified
+	  Version</link> to whoever possesses a copy of it. In addition, you
+	  must do these things in the <link linkend="fdl-modified">Modified
+	  Version</link>:
+	</para>
+	
+	<itemizedlist mark="opencircle">
+	  <listitem>
+	    <formalpara>
+	      <title>A</title>
+	      <para>
+		Use in the <link linkend="fdl-title-page">Title Page</link> (and
+		on the covers, if any) a title distinct from that of the <link
+		linkend="fdl-document">Document</link>, and from those of
+		previous versions (which should, if there were any, be listed in
+		the History section of the <link
+		linkend="fdl-document">Document</link>). You may use the same
+		title as a previous version if the original publisher of that
+		version gives permission.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>B</title>
+	      <para>
+		List on the <link linkend="fdl-title-page">Title Page</link>, as
+		authors, one or more persons or entities responsible for
+		authorship of the modifications in the <link
+		linkend="fdl-modified">Modified Version</link>, together with at
+		least five of the principal authors of the <link
+		linkend="fdl-document">Document</link> (all of its principal
+		authors, if it has less than five).
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>C</title>
+	      <para>
+		State on the <link linkend="fdl-title-page">Title Page</link>
+		the name of the publisher of the <link
+		linkend="fdl-modified">Modified Version</link>, as the
+		publisher.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>D</title>
+	      <para>
+		Preserve all the copyright notices of the <link
+		linkend="fdl-document">Document</link>.
+	      </para>
+	    </formalpara>
+	  </listitem>
+
+	  <listitem>
+	    <formalpara>
+	      <title>E</title>
+	      <para>
+		Add an appropriate copyright notice for your modifications
+		adjacent to the other copyright notices.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>F</title>
+	      <para>
+		Include, immediately after the copyright notices, a license
+		notice giving the public permission to use the <link
+		linkend="fdl-modified">Modified Version</link> under the terms
+		of this License, in the form shown in the Addendum below.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>G</title>
+	      <para>
+		Preserve in that license notice the full lists of <link
+		linkend="fdl-invariant"> Invariant Sections</link> and required
+		<link linkend="fdl-cover-texts">Cover Texts</link> given in the
+		<link linkend="fdl-document">Document's</link> license notice.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>H</title>
+	      <para>
+		Include an unaltered copy of this License.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>I</title>
+	      <para>
+		Preserve the section entitled "History", and its title, and add
+		to it an item stating at least the title, year, new authors, and
+		publisher of the <link linkend="fdl-modified">Modified Version
+		</link>as given on the <link linkend="fdl-title-page">Title
+		Page</link>.  If there is no section entitled "History" in the
+		<link linkend="fdl-document">Document</link>, create one stating
+		the title, year, authors, and publisher of the <link
+		linkend="fdl-document">Document</link> as given on its <link
+		linkend="fdl-title-page">Title Page</link>, then add an item
+		describing the <link linkend="fdl-modified">Modified
+		Version</link> as stated in the previous sentence.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>J</title>
+	      <para>
+		Preserve the network location, if any, given in the <link
+		linkend="fdl-document">Document</link> for public access to a
+		<link linkend="fdl-transparent">Transparent</link> copy of the
+		<link linkend="fdl-document">Document</link>, and likewise the
+		network locations given in the <link
+		linkend="fdl-document">Document</link> for previous versions it
+		was based on. These may be placed in the "History" section. You
+		may omit a network location for a work that was published at
+		least four years before the <link
+		linkend="fdl-document">Document</link> itself, or if the
+		original publisher of the version it refers to gives permission.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>K</title>
+	      <para>
+		In any section entitled "Acknowledgements" or "Dedications",
+		preserve the section's title, and preserve in the section all
+		the substance and tone of each of the contributor
+		acknowledgements and/or dedications given therein.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>L</title>
+	      <para>
+		Preserve all the <link linkend="fdl-invariant">Invariant
+		Sections</link> of the <link
+		linkend="fdl-document">Document</link>, unaltered in their text
+		and in their titles.  Section numbers or the equivalent are not
+		considered part of the section titles.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>M</title>
+	      <para>
+		Delete any section entitled "Endorsements". Such a section may
+		not be included in the <link linkend="fdl-modified">Modified
+		Version</link>.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	  
+	  <listitem>
+	    <formalpara>
+	      <title>N</title>
+	      <para>
+		Do not retitle any existing section as "Endorsements" or to
+		conflict in title with any <link
+		linkend="fdl-invariant">Invariant Section</link>.
+	      </para>
+	    </formalpara>
+	  </listitem>
+	</itemizedlist>
+	
+	<para>
+	  If the <link linkend="fdl-modified">Modified Version</link> includes
+	  new front-matter sections or appendices that qualify as <link
+	  linkend="fdl-secondary">Secondary Sections</link> and contain no
+	  material copied from the Document, you may at your option designate
+	  some or all of these sections as invariant. To do this, add their
+	  titles to the list of <link linkend="fdl-invariant">Invariant
+	  Sections</link> in the <link linkend="fdl-modified">Modified
+	  Version's</link> license notice. These titles must be distinct from
+	  any other section titles.
+	</para>
+	
+	<para>
+	  You may add a section entitled "Endorsements", provided it contains
+	  nothing but endorsements of your <link linkend="fdl-modified">Modified
+	  Version</link> by various parties--for example, statements of peer
+	  review or that the text has been approved by an organization as the
+	  authoritative definition of a standard.
+	</para>
+	
+	<para>
+	  You may add a passage of up to five words as a <link
+	  linkend="fdl-cover-texts">Front-Cover Text</link>, and a passage of up
+	  to 25 words as a <link linkend="fdl-cover-texts">Back-Cover
+	  Text</link>, to the end of the list of <link
+	  linkend="fdl-cover-texts">Cover Texts</link> in the <link
+	  linkend="fdl-modified">Modified Version</link>.  Only one passage of
+	  <link linkend="fdl-cover-texts">Front-Cover Text</link> and one of
+	  <link linkend="fdl-cover-texts">Back-Cover Text</link> may be added by
+	  (or through arrangements made by) any one entity. If the <link
+	  linkend="fdl-document">Document</link> already includes a cover text
+	  for the same cover, previously added by you or by arrangement made by
+	  the same entity you are acting on behalf of, you may not add another;
+	  but you may replace the old one, on explicit permission from the
+	  previous publisher that added the old one.
+	</para>
+	
+	<para>
+	  The author(s) and publisher(s) of the <link
+	  linkend="fdl-document">Document</link> do not by this License give
+	  permission to use their names for publicity for or to assert or imply
+	  endorsement of any <link linkend="fdl-modified">Modified Version
+	  </link>.
+	</para>
+      </listitem>
+    </varlistentry>
+    
+    <varlistentry id="fdl-section5">
+      <term>5. COMBINING DOCUMENTS</term>
+      <listitem>
+	<para>
+	  You may combine the <link linkend="fdl-document">Document</link> with
+	  other documents released under this License, under the terms defined
+	  in <link linkend="fdl-section4">section 4</link> above for modified
+	  versions, provided that you include in the combination all of the
+	  <link linkend="fdl-invariant">Invariant Sections</link> of all of the
+	  original documents, unmodified, and list them all as <link
+	  linkend="fdl-invariant">Invariant Sections</link> of your combined
+	  work in its license notice.
+	</para>
+
+	<para>
+	  The combined work need only contain one copy of this License, and
+	  multiple identical <link linkend="fdl-invariant">Invariant
+	  Sections</link> may be replaced with a single copy. If there are
+	  multiple <link linkend="fdl-invariant"> Invariant Sections</link> with
+	  the same name but different contents, make the title of each such
+	  section unique by adding at the end of it, in parentheses, the name of
+	  the original author or publisher of that section if known, or else a
+	  unique number. Make the same adjustment to the section titles in the
+	  list of <link linkend="fdl-invariant">Invariant Sections</link> in the
+	  license notice of the combined work.
+	</para>
+	
+	<para>
+	  In the combination, you must combine any sections entitled "History"
+	  in the various original documents, forming one section entitled
+	  "History"; likewise combine any sections entitled "Acknowledgements",
+	  and any sections entitled "Dedications". You must delete all sections
+	  entitled "Endorsements."
+	</para>
+      </listitem>
+    </varlistentry>
+    
+    <varlistentry id="fdl-section6">
+      <term>6. COLLECTIONS OF DOCUMENTS</term>
+      <listitem>
+	<para>
+	  You may make a collection consisting of the <link
+	  linkend="fdl-document">Document</link> and other documents released
+	  under this License, and replace the individual copies of this License
+	  in the various documents with a single copy that is included in the
+	  collection, provided that you follow the rules of this License for
+	  verbatim copying of each of the documents in all other respects.
+	</para>
+	
+	<para>
+	  You may extract a single document from such a collection, and
+	  distribute it individually under this License, provided you insert a
+	  copy of this License into the extracted document, and follow this
+	  License in all other respects regarding verbatim copying of that
+	  document.
+	</para>
+      </listitem>
+    </varlistentry>
+    
+    <varlistentry id="fdl-section7">
+      <term>7. AGGREGATION WITH INDEPENDENT WORKS</term>
+      <listitem>
+	<para>
+	  A compilation of the <link linkend="fdl-document">Document</link> or
+	  its derivatives with other separate and independent documents or
+	  works, in or on a volume of a storage or distribution medium, does not
+	  as a whole count as a <link linkend="fdl-modified">Modified
+	  Version</link> of the <link linkend="fdl-document"> Document</link>,
+	  provided no compilation copyright is claimed for the compilation.
+	  Such a compilation is called an "aggregate", and this License does not
+	  apply to the other self-contained works thus compiled with the <link
+	  linkend="fdl-document">Document</link> , on account of their being
+	  thus compiled, if they are not themselves derivative works of the
+	  <link linkend="fdl-document">Document</link>.  If the <link
+	  linkend="fdl-cover-texts">Cover Text</link> requirement of <link
+	  linkend="fdl-section3">section 3</link> is applicable to these copies
+	  of the <link linkend="fdl-document">Document</link>, then if the <link
+	  linkend="fdl-document">Document</link> is less than one quarter of the
+	  entire aggregate, the <link linkend="fdl-document">Document's</link>
+	  <link linkend="fdl-cover-texts">Cover Texts</link> may be placed on
+	  covers that surround only the <link
+	  linkend="fdl-document">Document</link> within the aggregate. Otherwise
+	  they must appear on covers around the whole aggregate.
+	</para>
+      </listitem>
+    </varlistentry>
+    
+    <varlistentry id="fdl-section8">
+      <term>8. TRANSLATION</term>
+      <listitem>
+	<para>
+	  Translation is considered a kind of modification, so you may
+	  distribute translations of the <link
+	  linkend="fdl-document">Document</link> under the terms of <link
+	  linkend="fdl-section4">section 4</link>. Replacing <link
+	  linkend="fdl-invariant"> Invariant Sections</link> with translations
+	  requires special permission from their copyright holders, but you may
+	  include translations of some or all <link
+	  linkend="fdl-invariant">Invariant Sections</link> in addition to the
+	  original versions of these <link linkend="fdl-invariant">Invariant
+	  Sections</link>. You may include a translation of this License
+	  provided that you also include the original English version of this
+	  License. In case of a disagreement between the translation and the
+	  original English version of this License, the original English version
+	  will prevail.
+	</para>
+      </listitem>
+    </varlistentry>
+    
+    <varlistentry id="fdl-section9">
+      <term>9. TERMINATION</term>
+      <listitem>
+	<para>
+	  You may not copy, modify, sublicense, or distribute the <link
+	  linkend="fdl-document">Document</link> except as expressly provided
+	  for under this License. Any other attempt to copy, modify, sublicense
+	  or distribute the <link linkend="fdl-document">Document</link> is
+	  void, and will automatically terminate your rights under this
+	  License. However, parties who have received copies, or rights, from
+	  you under this License will not have their licenses terminated so long
+	  as such parties remain in full compliance.
+	</para>
+      </listitem>
+    </varlistentry>
+    
+    <varlistentry id="fdl-section10">
+      <term>10. FUTURE REVISIONS OF THIS LICENSE</term>
+      <listitem>
+	<para>
+	  The <ulink type="http" url="http://www.gnu.org/fsf/fsf.html">Free
+	  Software Foundation</ulink> may publish new, revised versions of the
+	  GNU Free Documentation License from time to time. Such new versions
+	  will be similar in spirit to the present version, but may differ in
+	  detail to address new problems or concerns. See <ulink type="http"
+	  url="http://www.gnu.org/copyleft">http://www.gnu.org/copyleft/</ulink>.
+	</para>
+	
+	<para>
+	  Each version of the License is given a distinguishing version
+	  number. If the <link linkend="fdl-document">Document</link> specifies
+	  that a particular numbered version of this License "or any later
+	  version" applies to it, you have the option of following the terms and
+	  conditions either of that specified version or of any later version
+	  that has been published (not as a draft) by the Free Software
+	  Foundation. If the <link linkend="fdl-document">Document</link> does
+	  not specify a version number of this License, you may choose any
+	  version ever published (not as a draft) by the Free Software
+	  Foundation.
+	</para>
+      </listitem>
+    </varlistentry>
+
+    <varlistentry id="fdl-using">
+      <term>Addendum</term>
+      <listitem>
+	<para>
+	  To use this License in a document you have written, include a copy of
+	  the License in the document and put the following copyright and
+	  license notices just after the title page:
+	</para>
+
+	<para>
+	  Copyright &copy; YEAR  YOUR NAME.
+	</para>
+
+	<para>
+	  Permission is granted to copy, distribute and/or modify this document
+	  under the terms of the GNU Free Documentation License, Version 1.1 or
+	  any later version published by the Free Software Foundation; with the
+	  <link linkend="fdl-invariant">Invariant Sections</link> being LIST
+	  THEIR TITLES, with the <link linkend="fdl-cover-texts">Front-Cover
+	  Texts</link> being LIST, and with the <link
+	  linkend="fdl-cover-texts">Back-Cover Texts</link> being LIST.  A copy
+	  of the license is included in the section entitled <quote>GNU Free
+	  Documentation License</quote>.
+	</para>
+
+	<para>
+	  If you have no <link linkend="fdl-invariant">Invariant
+	  Sections</link>, write "with no Invariant Sections" instead of saying
+	  which ones are invariant.  If you have no <link
+	  linkend="fdl-cover-texts">Front-Cover Texts</link>, write "no
+	  Front-Cover Texts" instead of "Front-Cover Texts being LIST"; likewise
+	  for <link linkend="fdl-cover-texts">Back-Cover Texts</link>.
+	</para>
+
+	<para>
+	  If your document contains nontrivial examples of program code, we
+	  recommend releasing these examples in parallel under your choice of
+	  free software license, such as the <ulink type="http"
+	  url="http://www.gnu.org/copyleft/gpl.html"> GNU General Public
+	  License</ulink>, to permit their use in free software.
+	</para>
+      </listitem>
+    </varlistentry>
+  </variablelist>
+</appendix>  
\ No newline at end of file
diff --git a/doc/C/config-prefs.sgml b/doc/C/config-prefs.sgml
new file mode 100644
index 0000000000..67ca0e7577
--- /dev/null
+++ b/doc/C/config-prefs.sgml
@@ -0,0 +1,209 @@
+
+    <chapter id="config-prefs">
+      <title>Advanced Configuration with the Preferences Window</title>
+      <para>
+        If you prefer not to use the setup assistant, select
+        <guimenuitem>Preferences</guimenuitem> from the
+        <guimenu>Settings</guimenu> menu, and work your way through
+        the page tabs it offers you.  They are:
+        <itemizedlist>
+          <listitem>
+	    <para>
+               <guilabel>Identity</guilabel>, which allows you to set
+               your name, email address, and other information.  The
+               default values are the ones found on your system account.
+	    </para>
+	  </listitem>
+
+	  <listitem>
+	    <para>
+              <guilabel>Network</guilabel>, which allows you to
+              specify your network settings.  There are no default
+              values for this information.
+             </para>
+	  </listitem>
+
+	  <listitem>
+	    <para>
+              <guilabel>Mail</guilabel>, which allows you to specify
+              attachment and HTML handling, forwarding behavior,
+              filters, and other <application>Evolution</application>
+              behaviors specific to email.  The default behaviors are
+              those approved by Jamie Zawinski.
+            </para>
+	  </listitem>
+ 
+	  <listitem>
+	    <para>
+               <guilabel>Contacts</guilabel>, which allows you to
+               specify behavior that is specific to your contact
+               manager.
+            </para>
+	  </listitem>
+
+	  <listitem>
+	    <para>
+              <guilabel>Calendar</guilabel>, which allows you to set
+              the way that your calendar will behave and appear.  The
+              default view is by week and the default calendar is
+              Western.  Date format is determined by the system clock
+              and localization, and cannot be set here.
+            </para>
+	  </listitem>
+ 
+	  <listitem>
+	    <para>
+              <guilabel>General</guilabel>, which covers everything
+              else, including the <application>Evolution</application>
+              startup screen.
+            </para>
+	  </listitem>
+	</itemizedlist>
+      
+        The <interface>Preferences Dialog</interface> is shown in
+        <xref linkend="config-prefs-fig">.
+      </para>
+
+      <!-- ==============Figure===================== -->
+      <figure id="config-prefs-fig">
+	<title>Preferences Dialog</title>
+	<screenshot>
+	  <screeninfo>Preferences dialog</screeninfo>
+	  <graphic fileref="evolution_config_pic" format="png" srccredit="Aaron Weber">
+	    </graphic>
+	</screenshot>
+      </figure>
+      <!-- ==============End of Figure================-->
+
+
+      <sect1 id="config-prefs-identity">
+      <title>Identity Settings</title> 
+      <para>
+         If you have only one email address, or use automatic
+         forwarding to funnel multiple addresses into one, then you
+         will only need to configure one identity. To create a single
+         user with a single identity, enter the following information:
+         (INSERT detailed DESCRIPTION HERE)
+      </para>
+
+      <para>
+         If you have one email accout for your personal life, and one
+	 for work, you'll want to create multiple identities.  You
+	 can do this by: (INSERT DESCRIPTION HERE)
+      </para>
+
+      <note id="config-prefs-identity-note">
+	<title>Multiple Identities and Network Settings</title>
+	<para>
+           If you use multiple network connections&mdash;if, for
+           example, you dial up an ISP for your personal mail, and use
+           a LAN for your work-related tasks&mdash; you will also have
+           to set seperate network settings for each identity.
+        </para>
+      </note>
+    </sect1>
+
+    <sect1 id="config-prefs-network">
+      <title>Setting up the Network</title> 
+      <para>
+        In order to do much of anything with
+        <application>Evolution</application>, you need to connect to
+        your network.  To do that, you'll need to know your user name
+        and password, what sort of mail sending and receiving
+        protocols your network uses, and the names of the servers
+        you'll be using.  If you're switching from another groupware
+        or email progam, you can almost certainly use the same
+        settings as you did with that program.  Select the
+        <guibutton>Network</guibutton> tab in the
+        <interface>Preferences</interface> window to get started.
+      </para>
+ 
+	<sect2 id="config-prefs-network-advanced">
+	  <title>Advanced Network Configuration</title>
+	  <para>
+            INSERT a little introduction paragraph here.
+          </para>
+	  <sect3 id="config-prefs-network-advanced-multiconnect">
+	    <title>Multiple Network Connections</title>
+	    <para>
+              People with who use multiple ISP's or networks, or who
+	      have multiple email accounts, will need to do a little
+	      more work, but not much.
+            </para>
+	    <example>
+	      <title>Multiple Identities and Networks</title>
+	      <para>
+                Nate's laptop goes everywhere with him, and he needs
+	        to be able to use <application>Evolution</application>
+	        from anywhere&mdash a hotel room, an airplane, a
+	        client's office, his office, anywhere at all.  (INSERT
+	        HOW EVOLUTION HELPS HIM DO THIS).
+              </para>
+	    </example>
+
+	    <para>
+              (INSERT DESCRIPTION OF WHAT THESE THINGS ARE AND HOW TO
+              USE THEM) (I'M THINKING IN TERMS OF THE APPLE LOCATION
+              MANAGER) (Kill this section if Evolution doesn't support
+              this for 1.0).
+            </para>
+	  </sect3>
+	  
+	  <sect3 id="config-prefs-network-advanced-other">
+	    <title>Other Advanced Network Settings</title>
+            <para>
+              I can't think of any at the moment but i'm sure they're
+              out there.  They belong here.
+          </para>
+	  </sect3>
+	</sect2>
+      </sect1>
+      <sect1 id="config-prefs-mail">
+	<title>Modifying the Mail</title>
+	<para>
+          This section discusses mail-specific preferences.  Click on
+          the <guibutton>Mail</guibutton> tab in the
+          <interface>Preferences</interface> window to access these
+          settings.
+        </para>
+	<para>
+          You can set the following options: <!--insert variable list here-->
+        </para>
+      </sect1>
+    
+      <sect1 id="config-prefs-contact">
+	<title>Managing the Contact Manager</title>
+	<para>
+          To set the behavior of your Contact Manager, click on the
+          <guibutton>Contact Manager</guibutton> tab in the
+          <interface>Preferences</interface> window.
+        </para>
+	<para>
+          You can set the following options: <!--insert variable list
+          here-->
+        </para>
+      </sect1>
+    
+      <sect1 id="config-prefs-cal">
+	<title>Configuring the Calendar</title>
+	<para>
+          This section discusses calendar-specific preferences.  Click
+          on the <guibutton>Calendar</guibutton> tab in the
+          <interface>Preferences</interface> window to access these
+          settings.
+        </para>
+        <para>
+          You can set the following options: <!--insert variable list
+          here-->
+        </para>
+      </sect1>
+
+
+      <sect1 id="config-prefs-general">
+	<title>General Preferences</title> 
+	<para>
+          Overall Evolution prefs-- whatever else doesn't fit.
+        </para>
+      </sect1>
+    </chapter>
+    
\ No newline at end of file
diff --git a/doc/C/config-setupassist.sgml b/doc/C/config-setupassist.sgml
new file mode 100644
index 0000000000..03b85ea12c
--- /dev/null
+++ b/doc/C/config-setupassist.sgml
@@ -0,0 +1,16 @@
+
+    <chapter id="config-setupassist">
+      <title>Easy Setup with the Setup Assistant</title>
+      <para>
+        The setup assistant can gather most of the information
+        necessary for <application>Evolution</application>'s daily
+        operation. If you chose not to use it the first time you ran
+        <application>Evolution</application>, you can run it again by
+        doing SOMETHING HERE.
+      </para>
+      <para>
+         This paragraph will describe all information required by the
+         setup assistant. It will include a long itemized list, and a
+         screenshot or two.
+      </para>
+    </chapter>
diff --git a/doc/C/config-sync.sgml b/doc/C/config-sync.sgml
new file mode 100644
index 0000000000..ae78a6daaf
--- /dev/null
+++ b/doc/C/config-sync.sgml
@@ -0,0 +1,67 @@
+  <chapter id="config-sync">
+ 
+       <!-- THIS ENTIRE CHAPTER MAY BE DELETED -->
+
+     <title>Setting up your synchronization system</title> 
+     <para>
+        Synchronization presents you with two issues you'll need to
+        deal with.  The first one is pretty simple: you'll need to get
+        the data to move among the various devices you're using.  If
+        you've already got <application>Gnome-Pilot</application>
+        working, then all you have to do is tell it to use Evolution
+        as a conduit.  If you haven't used
+        <application>Gnome-Pilot</application> before, you'll need to
+        run the GNOME <application>Control Center</application> and go
+        through the hand-held device setup assistant.  Then you can
+        create the Evolution conduit and press the hotsync button.
+      </para>
+      <para>
+        If that doesn't work, jump up and down several times and swear
+        loudly.  Then make sure you've got
+        <application>Gnome-Pilot</application> going to the right
+        device (for my serial port, it's /dev/ttys0, not the default
+        /dev/pilot) and that you have read and write permission on
+        that device.  If you don't you'll need to be added to whatever
+        group has those permissions (for my system, it's tty).
+        Alternately, if you're the only user of your computer and
+        don't care too much about security, just use
+        <command>su</command> to become root, and then use
+        <command>chmod a+rw /dev/[DEVICENAME]</command> to set
+        universal read and write permissions on that port&mdash; just
+        don't tell your sysadmin I said you could.  (Sysadmins, of
+        course, would never do such a thing.)
+     </para>
+     <para>
+        Once <application>Evolution</application> knows where to get
+        the mail, address, and calendar data, it needs to know what to
+        do with it.  When you synchronize your local data with the data on
+        a server or handheld device, you may run into conflicts:
+        perhaps you have ended up with two cards with the same name
+        and different addresses, or old mail that has been deleted
+        from one device but not the other.  What if you want to keep
+        only the most recent mail on your hand-held or your laptop,
+        but all the mail on the LDAP server or your desktop machine?
+        Select the <guibutton>Synchronization</guibutton> tab from the
+        <interface>Preferences</interface> window to set up the
+        conflict resolution preferences.
+     </para>
+      <para> 
+         You can set <application>Evolution</application>'s
+         synchronization behavior in the following ways: 
+         <!-- LIST HERE -->
+      </para>
+      <para> 
+         <warning> 
+	  <title>Data Loss Prevention</title> 
+	  <para>
+	    It's always a good idea to make a backup.  If you set your
+	    synchronization behaviors wrong, you could end up deleting
+	    the messages and cards you want to keep, and keeping the
+	    ones you want to delete.  Before you change these
+	    preferences, make a backup of your
+	    <application>Evolution</application> files.  You can do
+	    this by... <!--DESCRIBE HERE -->
+          </para>
+	</warning>
+       </para>
+    </chapter>
diff --git a/doc/C/devel-action.sgml b/doc/C/devel-action.sgml
new file mode 100644
index 0000000000..5d40c78bf7
--- /dev/null
+++ b/doc/C/devel-action.sgml
@@ -0,0 +1,18 @@
+
+    <chapter id="devel-actions">
+      <title>Actions: Making Evolution Behave</title>
+      <sect1 id="devel-actions-build">
+	<title>Build Actions</title>
+	<para>
+          How to create an action.
+        </para>
+      </sect1>
+
+      <sect1 id="devel-actions-use">
+	<title>Using Actions</title>
+	<para>
+          How to use an action you or someone else has built.
+        </para>
+      </sect1>
+    </chapter>
+    
\ No newline at end of file
diff --git a/doc/C/devel-component.sgml b/doc/C/devel-component.sgml
new file mode 100644
index 0000000000..db4f93c27d
--- /dev/null
+++ b/doc/C/devel-component.sgml
@@ -0,0 +1,24 @@
+
+    <chapter id="devel-component">
+      <title>Evolution Components</title>
+      <subtitle> Build your own species </subtitle>
+      <para>
+          Explain exactly what an Evolution Component is.
+      </para>
+
+      <sect1 id="devel-component-build">
+	<title>Building Evolution Components</title>
+	<para>
+          Explain how to build them-- what resources are available,
+          what interfaces exposed.
+        </para>
+      </sect1>
+
+      <sect1 id="devel-component-use">
+	<title>Using Additional Evolution Components</title>
+	<para>
+          Once you've got one--either you've built it or borrowed it--
+          you can use it.  Here's how.
+        </para>
+      </sect1>      
+    </chapter>
\ No newline at end of file
diff --git a/doc/C/devel-script.sgml b/doc/C/devel-script.sgml
new file mode 100644
index 0000000000..74dbf161cd
--- /dev/null
+++ b/doc/C/devel-script.sgml
@@ -0,0 +1,17 @@
+
+    <chapter id="devel-scripts" >
+      <title>Scripting: Making Evolution Sit up and Beg</title>
+      <sect1 id="devel-scripts-build">
+	<title>Writing Scripts</title>
+	<para>
+          How to write scripts for Evolution.
+        </para>
+      </sect1>
+
+      <sect1 id="devel-scripts-use">
+	<title>Using Scripts</title>
+	<para>
+          How to use and install scripts for Evolution.
+        </para>
+      </sect1>
+    </chapter>
diff --git a/doc/C/evo_book_0.1.sgml b/doc/C/evo_book_0.1.sgml
deleted file mode 100644
index 357da80224..0000000000
--- a/doc/C/evo_book_0.1.sgml
+++ /dev/null
@@ -1,449 +0,0 @@
-<!DOCTYPE book PUBLIC "-//GNOME//DTD DocBook PNG Variant V1.0//EN">
-
-<book>
-<bookinfo>
-  <title>Evolution Users Guide</title>
-  <author><firstname>Aaron</firstname><surname>Weber</surname></author>
-  <copyright><year>2000</year><holder>Aaron Weber and Helix Code, inc.</holder></copyright>
-
-  <legalnotice>
-PUT THE RIGHT LEGALNOTICE IN HERE
- 
-      <para> Windows, Exchange, and Outlook are trademarks of Microsoft Corp.</para>
-      <para> Lotus and Lotus Notes are trademarks of The Louts Corporation.</para>
-      <para> Macintosh and Apple are  trademarks of Apple Computer, Inc.</para>
-      <para> All other trademarks are property of their respective owners.</para>
-    </legalnotice>
-
-     <releaseinfo> 
-		  This is version 0.0 of Evolution manual.
-     </releaseinfo> <!-- this is version of manual, not application --> 
-
-</bookinfo>
-
-<preface>
-<!-- =============Introduction ============================= -->
-    <title>Introduction</title> 
-
-    <section> <title> What is Evolution?</title>
-    <para>
-      <application>Evolution</application> is a suite of groupware applications
-      for mail, contact management, and calendaring.  It is
-      included in the package <filename>Evolution</filename>, which is a
-      part of the GNOME desktop environment. This document describes
-      version &version; of <application>Evolution</application>
-    </para>
-
-    <para>
-      What that means is that Evolution is your personal secretary.  It can keep track of 
-      memos, emails,
-      and appointments for you and for everyone in your office.
-    </para>
-
-    <para><application>Evolution</application> can be started by
-        selecting <guimenuitem>Evolution</guimenuitem> from
-        <guisubmenu>SUBMENU</guisubmenu> submenu of the <guimenu>Main
-	Menu</guimenu>, or by running the command
-	<command>evolution</command> on the commandline.  
-    </para>
-
-
-</preface>
-
-<part id="usage">
-<title>Using Evolution</title>
-
-    <partintro>
-    <para>
-       As was said before, <application>Evolution</application> can be
-       used to send and recieve email, manage address and other contact information,
-       and maintain  This section describes basic usage of
-       <application>Evolution</application> in each of those functions.  As with most of Linux, 
-       there's more than one way to do things, and you should pick whichever one strikes you as most
-       appropriate.
-    </para>
-    </partintro>
-
-
-    <chapter id="basics">
-    <title>Basic usage</title>
-      <para>
-	When you first start <application>Evolution</application>, you see
-	the <interface>Main window</interface>, as shown in 
-	<xref linkend="mainshot">the following figure. 
-	 From there, you should select which features you wish to
-	use by clicking on their icons in the left-hand navigational column.
-	The Mail features can be accessed by clicking on the <guibutton>Mail</guibutton>,
-	and likewise for other features.
-<!-- ==============Figure=================================== -->
-	<figure id="mainshot">
-	<title>Evolution Main Window</title>
-	<screenshot>
-	    <screeninfo>Evolution Main Window</screeninfo>
-	    <graphic fileref="SCREENSHOT" format="png"
-	    srccredit="Aaron Weber">
-	    </graphic>
-	</screenshot>
-	</figure>
-<!-- ==============End of Figure=================================== -->
-      </para>
-
-  </chapter>
- 
-  <chapter id="mailer"> 
-     <title>The Evolution Mailer</title>
-      <abstract>
-       <para>
-       This chapter covers the use of the Evolution Mailer. 
-       Configuration of the mail client is discussed in <xref linkend="customization">.
-       If you are already accustomed to other email programs, 
-       you can probably skip the mail sending and checking sections. 
-       The more complex functions, such as filtering, organizing, and searching mail,
-        have some features that are not found in other email programs, and 
-       even power users may wish to review these sections of the guide.
-      <!--those function descr's should be xrefs to sections of the chapter-->
-     </para>
-      </abstract>
-
-      <sect1 id="mailsending">
-      <title>Sending and Recieving Mail</title>
-       <para>
-      You can start writing a new email message by selecting <guimenuitem>New Mail</guimenuitem> from
-      the <guimenu>FilMenu</guimenu>, or by pressing <KeyCombo>NEW-MESSAGE-COMBO</KeyCombo>.  
-      When you do so, the <interface>New Message</interface> window will open, as shown in 
-      <xref linkend="evolution-newmsg">.
-
-
-<!-- ==============Figure=================================== -->
-	<figure id="evolution-newmsg">
-	<title>New Message Window</title>
-	<screenshot>
-	    <screeninfo>Evolution Main Window</screeninfo>
-	    <graphic fileref="evolution_newmsg" format="png"
-	    srccredit="Aaron Weber">
-	    </graphic>
-	</screenshot>
-	</figure>
-<!-- ==============End of Figure=================================== -->
-
-      </para>
-     
-     <para> 
-      You can pick recipients in several ways: 
-      The <guilabel>TO:</guilabel> field is for the primary recipients of the message your are going to send.
-      It is considered bad form to have more than a few email addresses in this form.
-      </para>
-      <para>
-      If you want to send a copy of the message to someone, you may also use the <guilabel>Cc:</guilabel> field.  
-      "Cc" stands for "Carbon Copy"-- Those people will recieve a copy of the message.  They will see
-      the rest of the message list, and are noted as secondary recipients of the message. 
-      </para>
-      
-      <para>
-      If you have a large number of recipients, or if you want to send mail to several people without
-      telling them that it's gone to multiple people, you should use <guilabel>BCC.</guilabel>  BCC stands 
-      for "Blind Carbon Copy".  Addresses entered into this field will recieve the message
-      but the message headers will not see the rest of the recipient list.
-      </para>
-
-      <para>
-      Enter a subject into the <guilabel>Subject:</guilabel> field.
-
-      Enter the text of your message into the <guilabel>Message:</guilabel> text area.
-      </para>
-      
-      <para>
-      If you want to attach a document to your email message, you can do so by
-       <!--describe process here-->.  If the people you are sending a message to
-       can read HTML mail, you can embed an image into the mail.  Otherwise,
-       it's best to attach images, just like other documents.  Be aware that a large
-       attachment will take a long time to download.
-      </para>
-
-      
-      <para>
-      Click <guibutton>Send</guibutton> or press <KeyCombo>SENDCOMBO</KeyCombo> to send the mail.
-      </para>
-    <tip> 
-      <title>Send Now, Send Later</title>
-      <para>
-      Evolution will send mail immediately unless you set it to do so otherwise.  It also checks for 
-      new mail every time you send mail.  If you
-      want, however, you can queue your messages to be sent at a later time, and also set your
-      preferences to check mail on a regular basis, and alert you whenever it finds new messages.
-      I like  to use "Send Later" because it gives me a chance change my mind about a message
-      before it goes out, and I have Evolution set to check my mail every ten minutes, and beep
-      when I get mail that it thinks isn't spam.
-      Use the <interface>Mail Preferences</interface> to specify message queue and filter behavior.  
-      Preferences are discussed in <xref linkend="customization">.
-      </para>
-    </tip>
-    </sect1>
-
-    <sect1 id="mail-sorting">
-    <title>Organizing Your Mail</title>
-
-    <para>
-    If you only get a few messages a day, you probably don't need to to sort or organize them.  When you get several hundred each day,
-    and when you want to refer to a message you've recieved six weeks ago, you want a real
-    organizing system.  This section will cover the mail sorting and organization: folders, searches, vFolders, and filters.
-    <!--those last items should be links-->
-
-    <sect2 id="mail_folders">
-    <para>
-    You can create new folders by selecting <guimenuitem>ITEM</guimenuitem> from the <guimenu>MENU</guimenu>, or by
-    pressing <KeyCombo>SENDCOMBO</KeyCombo>.  Move mail to them by selecting <guimenuitem>ITEM</guimenuitem> from the
-    <guimenu>MENU</guimenu>, or by pressing <KeyCombo>SENDCOMBO</KeyCombo>.  An email message can be in only one folder at a time,
-    just like real mail in real folders. If you forget where an email is, you can search for it. If you find that you want
-    an email to be in several places at once, you should consider creating a vFolder, or virtual folder.
-    <para>
-    </sect2>    
-
-    <sect2 id="mail_searching">
-    <para>
-    Because Evolution automatically creates an index of every email you recieve, it can search through your old
-    messages and present you with the results in short order.  
-    <!--describe the way one creates a search and so forth.-->    
-    </para>
-
-    <para>
-    If you find yourself performing a search frequently, you can save it as vFolder.
-    </para>
-    </sect2>
-    
-    <sect2 id="mail_vFolders">
-    <para>
-    Virtual Folders, or vFolders, are one of the more  advanced features of <application>Evolution</application>.  If they confuse you,
-    you don't have to use them.  However, if you get a lot of mail, and find yourself referring to messages, looking for old email, 
-    or just living in your email client, you'll probably want to use them. 
-    Basically, a vFolder is a saved search, which you can access the same way you would a normmal folder.
-    There are several important differences between the two, however, which come from the fact that  a conventional
-    folder actually contains a message, but a virtual folder is really a different view of all your email.  This means that
-    while a  message can be in several vFolders, it can be in only one conventional folder.  Also, 
-    you cannot add or delete a message from a vFolder, and when you delete a message from a conventional folder,
-    it will disappear from all your vFolders--a search can't find a deleted message.  
-    </para>
-    </sect2>
-
-    <example><title>Using vFolders</title>
-    <para>
-    I have a vFolder set up for all the mail about a project I'm
-    working on, and another one for all the mail from my friend Bernie.
-    If Bernie sends me mail about the project, I can see that message both in the "Bernie" folder and in the "Project" folder.
-    That's because when I open up the "Bernie" folder, I'm really performing a search for all the mail from Bernie, and when you open the 
-    "Project" folder you're really performing a search for all the mail about the project.  That particular message 
-    actually resides in some other folder,
-    maybe just in my Inbox.  I can't delete it from the vFolder, because the vFolder is really a different view of my messages.
-    When I delete it from
-    the Inbox, I have also removed it from all my vFolders, because no search can find a deleted message.
-    <!--this could use a cool picture of the Inbox and 2 vFolders with the message in all 3-->
-    </para>
-    </example>
-    
-
-    <sect2 id="mail_filters">
-    <para>
-    Filters sort your email for you, automatically.  You can access the Filter functions of
-    the email client by <!--BLAH BLAH BLAH-->.
-    </para>
-
-    <para>    
-    Email starts in your Inbox.  As it arrives, it is indexed and filtered from ther.  Any email
-    that does not meet filter action criteria remains in the Inbox.   To create a filter,
-     <!--open the menu somehow-->f you have filters enabled,
-    </para>
-    </sect2>
-  </chapter>
-
-  <chapter id="calendar">
-  <title>Using the Calendar</title>
-  <para>To begin using the calendar, select <guibutton>Calendar</guibutton>
-  from the main navigational frame.  This will cause the calendar component of 
-  <application>Evolution</application> to become active.  This is illustrated in
-  the figure below:  
-<!-- ==============Figure=================================== -->
-	<figure id="contact_picture">
-	  <title>Evolution Contact Manager Window</title>
-	  <screenshot>
-	    <screeninfo>Evolution Contact Manager Window</screeninfo>
-	    <graphic fileref="SCREENSHOT" format="png"
-	    srccredit="ME">
-	    </graphic>
-	  </screenshot>
-	</figure>
-<!-- ==============End of Figure=================================== -->
-</para>
-
-
-
-  </chapter>
-  <chapter id="addressbook">
-
-</chapter>
-
-<chapter>
-<title>Administration and Large-scale setup</title>
-</chapter>
-
-</part><!--end of part two, Administration and Large-Scale Setup-->
-
-
-    <appendix> ... </appendix>
-    <appendix> ... </appendix>
-<index> ... </index>
-</book>
-
-    
-</chapter>
-
-<chapter>
-<title>Administration and Large-scale setup</title>
-</chapter>
-
-</part><!--end of part two, Administration and Large-Scale Setup-->
-
-
-    <appendix> ... </appendix>
-    <appendix> ... </appendix>
-<index> ... </index>
-</book>
-
-
-
-  </chapter>
-
-
-</part> <!--end of part one-->
- 
-<part id="configuration">
-<title>Configuring Evolution</title>    
-
-<chapter>
-<title>The Preferences Dialog</title>
-
-     <para>
-      To change default settings, select
-      <guimenuitem>Preferences</guimenuitem> command in
-      <guimenu>Settings</guimenu> menu. This launches the
-      <interface>Preferences dialog</interface>, shown in <xref
-      linkend="shot2">. 
-     </para>
-<!-- ==============Figure=================================== -->
-	<figure id="shot2">
-	  <title>Preferences Dialog</title>
-	  <screenshot>
-	    <screeninfo>Preferences dialog</screeninfo>
-	    <graphic fileref="SCREENSHOT" format="png"
-	    srccredit="ME">
-	    </graphic>
-	  </screenshot>
-	</figure>
-<!-- ==============End of Figure=================================== -->
-    
-<!--obviously there should be more description here.-->
-
-</chapter>
-
-<chapter>
-<title>Administration and Large-scale setup</title>
-</chapter>
-
-</part><!--end of part two, Administration and Large-Scale Setup-->
-
-
-
-<!-- =============APPENDICES============================= -->
-  <appendix id="bugs">
-   
-    <title>Known bugs and limitations</title>
-    <abstract>
-    <para>
-     This appendix describes known bugs and limitations of
-    <application>Evolution</application>.  Please 
-    contact the appropriate people if you find one we have not listed,
-    or if you have a patch to fix one.
-    <para>
-    </abstract>
-
-    <para>
-      The program currently does not work.  At all.
-    </para>
-    </appendix>
-
-
-
-<!-- =============Another Appendix============================= -->
-
-  <appendix id="authors">
-    <title>Authors</title>
-     <para>
-      <application>Evolution</application> was written by:
-
-      Seth Alves: <email>alves@helixcode.com</email>
-      Anders Carlsson<email>andersca@helixcode.com</email>
-      Damon Chaplin:<email>damon@helixcode.com</email>
-      Clifford R. Conover <email>rusty@zootweb.com</email>
-      Miguel De Icaza: <email>miguel@helixcode.com</email>
-      Arturo Espinoza <email>arturo@nucleu.unam.mx</email>
-      Larry Ewing: <email>lewing@helixcode.com</email>
-      Bertrand Guiheneuf: <email>bertrand@helixcode.com</email>
-      Tuomas Kuosmanen: <email>tigert@gimp.org</email>
-      Christopher J. Lahey: <email>clahey@helixcode.com</email>
-      Matthew Loper:  <email>matt@helixcode.com</email>
-      Dave Mason <email>dcm@redhat.com</email>
-      Federico Mena: <email>federico@helixcode.com</email>
-      Eskil Heyn Olsen<email>deity@eski.dk</email>
-      Nat Friedman: <email>nat@helixcode.com</email>
-      Ettore Perazzoli:<email>ettore@helixcode.com</email>
-      Russell Steinthal: <email>rms39@columbia.edu</email>
-      Peter Teichman: <email>peter@helixcode.com</email>      
-      Chris Toshok: <email>toshok@helixcode.com</email>
-      Radek Doulik: <email>rodo@helixcode.com</email>
-      Dan Winship: <email>winship@helixcode.com</email>
-      Michael Zucchi: <email>notzed@helixcode.com</email>
-
-and other dedicated GNOME programmers. 
-</para>
-    <para>
-      The<application>Evolution</application> code owes a great debt to
-       <application>GNOME-pim</application>, <application>KHTMLW</application>
-      and the developers of <application>Evolution</application> acknowledge the efforts and contributions of its members.
-    </para>
-
-   <para>
-     For more information please visit <application>Evolution</application> <ulink
-      url="http://www.helixcode.com/apps/evolution.php3" type="http">Web page</ulink>.
-      Please send all comments, suggestions, and bug reports to the
-      <ulink url="http://bugs.gnome.org" type="http">GNOME bug
-      tracking database</ulink>. Instructions for submitting bug reports
-      can be found on-line at <ulink
-      url="http://bugs.gnome.org/Reporting.html" type="http">
-      http://bugs.gnome.org/Reporting.html</ulink>. If you are using GNOME
-      1.1 or later, you can also use command
-      <command>bug-buddy</command> for submitting bug reports. 
-    </para>
-    <para>
-      This manual was written by Aaron Weber
-      (<email>aaron@helixcode.com</email>) with the help of the application programmers.
-       Please send all comments
-      and suggestions regarding the manual to the GNOME Documentation
-      Project at <email>docs@gnome.org</email>. You can also add your
-      comments online by using <ulink type="http"
-      url="http://www.gnome.org/gdp/doctable/">GNOME Documentation
-      Status Table</ulink>. 
-    </para>
-    <!-- For translations: uncomment this:
-      <para> Latin translation was done by ME
-      (<email>MYNAME@MYADDRESS</email>). Please send all comments
-      and suggestions regarding this translation to SOMEWHERE.
-     </para> 
-     -->
-    </appendix>
-
-
-    <appendix> ... </appendix>
-    <appendix> ... </appendix>
-<index> ... </index>
-</book>
-
-
diff --git a/doc/C/evolution-guide.sgml b/doc/C/evolution-guide.sgml
new file mode 100644
index 0000000000..3e6b374fca
--- /dev/null
+++ b/doc/C/evolution-guide.sgml
@@ -0,0 +1,118 @@
+<!DOCTYPE Book PUBLIC "-//GNOME//DTD DocBook PNG Variant V1.1//EN"[
+
+<!ENTITY PREFACE SYSTEM "preface.sgml">
+<!ENTITY USAGE-SETUP SYSTEM "usage-setup.sgml">
+<!ENTITY USAGE-MAINWINDOW SYSTEM "usage-mainwindow.sgml">
+<!ENTITY USAGE-MAIL SYSTEM "usage-mail.sgml">
+<!ENTITY USAGE-CONTACT SYSTEM "usage-contact.sgml">
+<!ENTITY USAGE-CALENDAR SYSTEM "usage-calendar.sgml">
+<!ENTITY USAGE-SYNC SYSTEM "usage-sync.sgml">
+<!ENTITY CONFIG-SETUPASSIST SYSTEM "config-setupassist.sgml">
+<!ENTITY CONFIG-PREFS SYSTEM "config-prefs.sgml">
+<!ENTITY CONFIG-SYNC SYSTEM "config-sync.sgml">
+<!ENTITY DEVEL-ACTION SYSTEM "devel-action.sgml">
+<!ENTITY DEVEL-SCRIPT SYSTEM "devel-script.sgml">
+<!ENTITY DEVEL-COMPONENT SYSTEM "devel-component.sgml">
+<!ENTITY APX-BUGS SYSTEM "apx-bugs.sgml">
+<!ENTITY APX-AUTHORS SYSTEM "apx-authors.sgml">
+<!ENTITY APX-FDL SYSTEM "apx-fdl.sgml">
+]>
+
+
+<!-- Almost every chapter is an entity.  Files, Chapter id's, and entity names correspond.  APX is for appendix.  -->
+<book id="index">
+  <bookinfo>
+    <title>A User's Guide to Evolution</title>
+    <author><firstname>Aaron</firstname><surname>Weber</surname></author>
+    <copyright><year>2000</year><holder>Helix Code, Inc.</holder></copyright>
+    
+    <legalnotice>
+      <para>
+        PUT THE RIGHT LEGALNOTICE IN HERE
+      </para>
+    </legalnotice>
+
+    <releaseinfo>
+       This is version 0.4 of the Evolution manual.  
+    </releaseinfo> 
+    <!-- this is version of manual, not application -->
+
+<!-- ########## TO DO LIST: ########### -->
+ <!--
+finish content.
+standardize capitalization/formatting of titles, interface and
+component names.
+standardize spelling of buzzwords & techterms like email
+add glossterms and glossary
+standardize on second person, not 1st pers. plural.
+-->
+
+  </bookinfo>
+
+  &PREFACE;
+  
+  <part id="usage">
+    <title>Using Evolution</title>
+    <subtitle>A Guide for Everybody</subtitle> 
+     <partintro>
+      <para>
+        Part one of the <application>Evolution</application> manual
+        describes how to use <application>Evolution</application>
+        for email, contact management, and appointment and task
+        scheduling.  You'll find as you go along that, as with most of
+        Linux, there's more than one way to do things, and you can
+        pick whichever method you like best.
+      </para>
+    </partintro>
+
+    &USAGE-SETUP;
+    &USAGE-MAINWINDOW;
+    &USAGE-MAIL;
+    &USAGE-CONTACT;
+    &USAGE-CALENDAR;
+    &USAGE-SYNC;
+
+  </part>
+  <part id="config">
+  <title>Configuring and Managing Evolution</title>
+    <subtitle>A guide for Power Users and Administrators</subtitle>
+    <partintro>
+      <para>
+        <application>Evolution</application> is highly configurable.
+        Usually, when developers say that, they mean that they didn't
+        test it out thoroughly and have left it to other hackers to
+        "configure" themselves a working system.  When we say
+        configurable, we mean that although
+        <application>Evolution</application> will work perfectly well
+        with minimal setup hassle, you can alter its behavior to fit
+        your needs with just a little more work.
+      </para>
+    </partintro>
+
+    &CONFIG-SETUPASSIST;
+    &CONFIG-PREFS;
+    &CONFIG-SYNC;
+  </part>
+  <part id="devel">
+    <title>Developing for Evolution</title>
+    <subtitle>An Introduction for the Happy Few</subtitle>
+    <partintro>
+      <para>
+        There are three levels of developing for
+        <application>Evolution</application>.  You can write actions.
+        You can write scripts.  And you can write full-fledged
+        Evolution components.  INSERT CONTENT: paragraph should describe the
+        differences.
+      </para>
+    </partintro>
+    
+    &DEVEL-ACTION;
+    &DEVEL-SCRIPT;
+    &DEVEL-COMPONENT;
+  </part>
+
+  &APX-BUGS;
+  &APX-AUTHORS; 
+  &APX-FDL;
+
+</book>
diff --git a/doc/C/preface.sgml b/doc/C/preface.sgml
new file mode 100644
index 0000000000..05129eb550
--- /dev/null
+++ b/doc/C/preface.sgml
@@ -0,0 +1,149 @@
+
+  <preface id="introduction">
+<!-- =============Introduction ============================= -->
+    <title>Introduction</title> 
+
+    <section id="what"> 
+      <title> What is Evolution, and What Can It Do for Me?</title>
+      <para>
+        The idea of evolution as a process of improvement and
+        development is a strong influence on the developers at Helix
+        Code.  We named our <glossterm>groupware</glossterm> suite
+        "Evolution" because we knew that it would be able to survive
+        in the wilderness of the software marketplace for one reason:
+        it's better.
+      </para>
+      <para>
+        <application>Evolution</application> is a suite of groupware
+        applications within the GNOME desktop environment that you can
+        use to send, receive, and organize email, manage address and
+        other contact information, and maintain a calendar.  It
+        enables you to do those things on one or several computers,
+        connected directly or over a network, for one person or for
+        large groups.  <application>Evolution</application> can handle
+        almost all your communications tasks with the power and
+        flexibility of the GNOME desktop environment.
+      </para>
+      <para>
+        We built <application>Evolution</application> with three groups of
+        people in mind: everyday users, system administrators, and
+        developers.  
+
+        <itemizedlist>
+	  <listitem>
+	    <para>
+              For <emphasis>everyday users</emphasis>, we made
+              <application>Evolution</application> easy to use without
+              sacrificing power.  We made the interface familiar and
+              intuitive, but also allowed users to customize it to
+              their liking.  We made the setup and configuration as
+              easy as possible.  For any confusion, we wrote a
+              comprehensive manual and help system.
+            </para>
+	  </listitem>
+	  <listitem>
+	    <para>
+               For <emphasis>administrators</emphasis>, we made sure
+              <application>Evolution</application> met and and
+              exceeded the standards set by currently available
+              groupware products, and we developed support for most
+              major network protocols so that it can integrate
+              seamlessly with existing hardware and network
+              environments.  All of our efforts have made
+              <application>Evolution</application> both easy to use
+              and easy to support.
+            </para>
+	  </listitem>
+	  <listitem>
+	    <para>
+               For <emphasis>developers</emphasis>, we built in
+               support for open standards and protocols to turn
+               <application>Evolution</application> into an advanced
+               development platform.  From the simplest scripting to
+               the most complex network and component programming,
+               <application>Evolution</application> offers developers
+               the ideal environment for cutting-edge application
+               development.
+            </para>
+	  </listitem>
+	  <listitem>
+	    <para>
+               For all three groups, we did our best to ensure the
+               safety of data.
+            </para>
+          </listitem>
+	</itemizedlist>
+      </para>
+      <para>
+        In action, <application>Evolution</application> makes most
+        daily tasks faster, because we built it to work with you
+        instead of against you.  For example, it takes only one or two
+        clicks to enter an appointment or an address card sent to you
+        by email, or to send email to a contact or appointment.
+        <application>Evolution</application> makes displays faster and
+        more efficient, so searches are faster and memory usage is
+        much lower.  People who get lots of mail will appreciate
+        advanced features like <link
+        linkend="usage-mail-organize-vFolders">vFolders</link>, which
+        let you save searches as though they were ordinary mail
+        folders.
+      </para>
+
+    </section>
+
+    <section id="aboutbook">
+      <title>About This Book</title>
+
+    <!-- ************** FOLLOWING PARAGRAPH FOR DRAFT ONLY ************* -->
+      <para>
+        This is a DRAFT of the <application>Evolution</application>
+        User's Guide.  Please send comments on it to
+        <email>aaron@helixcode.com</email>.  Items that are known to
+        need action are indicated as such, often with notation like
+        (INSERT CONTENT HERE).  If you have content to add, please
+        contact me.  This paragraph will be removed in later versions
+        of the manual.
+      </para>
+    <!-- ************* END DRAFT ONLY PARAGRAPH ************** -->
+
+      <para>
+        This book is divided into three sections. The first section is
+        a <link linkend="usage">guided tour</link>&mdash; it will
+        explain how to use <application>Evolution</application>.  If
+        you are new to <application>Evolution</application> or to
+        groupware in general, this is the section for you. The second
+        section, covering <link linkend="config">configuration</link>,
+        is targeted at advanced users and administrators.  If you are
+        a network administrator, you may find yourself referring to
+        this section frequently.  The third section is a quick <link
+        linkend="devel">developer's guide</link>, for power users and
+        hackers.  If you want to add advanced scripting to
+        <application>Evolution</application>, write your own
+        embeddable components, or simply want to find out just how
+        powerful <application>Evolution</application> can be, this is
+        the section for you.
+      </para>
+      <para>
+        Throughout the book, you'll find examples, tips and warnings
+        to help you along.  Most of them are decent, hardworking
+        pieces of information, and genuinely try to be helpful. Some
+        of the tips, entitled <emphasis>Bad Ideas</emphasis>,
+        are, in fact, out to trick you.  Please don't follow their
+        advice, no matter how appealing it may sound.
+      </para>
+      <formalpara>
+        <title>Typographical conventions</title>
+	<para>
+          Some kinds of words are marked off with special typography.
+          It's listed below:
+          <simplelist>
+	    <member><application>Applications</application></member>
+	    <member><command>Commands</command></member>
+	    <member><guilabel>Labels</guilabel>for menu items and buttons</member>
+	    <member>Other text treatments</member>
+	    <member>more info here</member>
+	  </simplelist>
+        </para>
+      </formalpara>
+    </section>
+  </preface>
\ No newline at end of file
diff --git a/doc/C/usage-calendar.sgml b/doc/C/usage-calendar.sgml
new file mode 100644
index 0000000000..83e03c80c0
--- /dev/null
+++ b/doc/C/usage-calendar.sgml
@@ -0,0 +1,140 @@
+
+    <chapter id="usage-calendar">
+      <title>The Evolution Calendar: Time-Tamer Extraordinaire</title>
+      <para>
+        To begin using the calendar, select
+        <guibutton>Calendar</guibutton> from the <interface>shortcut
+        bar</interface>.  By default, the calendar starts in week view mode (IS
+        THIS TRUE? CHANGE TEXT TO FIT FEATURE). The calendar week view is
+        shown in <xref linkend="usage-calendar-fig">:
+
+       <!-- ============== Figure ============================= -->
+	<figure id="usage-calendar-fig">
+	  <title>Evolution Calendar View</title>
+	  <screenshot>
+	    <screeninfo>Evolution Contact Manager Window</screeninfo>
+	    <graphic fileref="cal-pic" format="png" srccredit="Aaron Weber">
+	    </graphic>
+	  </screenshot>
+	</figure>
+      <!-- ============== End of Figure ============================= --> 
+
+      </para>
+      <sect1 id ="usage-calendar-view"> 
+	<title>Ways of Looking at your Calendar</title>
+	<para>
+           You can view your calendar by the day, by the week, by the
+           month, or by the year.  To do so, click BUTTONS SOMEWHERE.
+        </para>
+	<para>
+           Describe the less-obvious differences among the views of
+           time here.
+        </para>
+
+	<para>
+           In addition, <application>Evolution</application> supports
+           Hebrew, Muslim, and other calendar formats.  To switch to a
+           different calendar format, choose
+           <guimenuitem>GUIMENUITEM</guimenuitem> from the
+           <guimenu>GUIMENU</guimenu>.
+        </para>
+	<para>
+           Describe the ways that different calendars can work here,
+           and how the different calendars work together.
+        </para>
+      </sect1>
+      <sect1 id="usage-calendar-apts">
+	<title>Scheduling With the Evolution Calendar</title>
+	<para>
+	   The <application>Evolution</application> calendar allows
+           you to schedule events for yourself or a group of people.
+           It can handle events that repeat, event lengths from ten
+           minutes to multiple days, and events that have a date but
+           no specific time.  You can set overlapping events, although
+           <application>Evolution</application> will warn you about
+           trying to do two things at once.  You can also set event
+           reminders so that you don't forget about everything you've
+           just put into your calendar. Basically, it can handle almost
+           any schedule you throw at it.
+        </para>
+	<sect2 id="usage-calendar-apts-basic">
+	  <title>Creating events</title>
+	  <para>
+            While looking at the calendar, select <guimenuitem>New
+            Appointment</guimenuitem> from the
+            <guimenu>MENU</guimenu>, or press
+            <keysym>KEYSYM</keysym>. The <interface>New
+            Appointment</interface> dialog will appear. (INSERT
+            DESCRIPTION OF INTERFACE HERE: Date, Time, Recurrence,
+            Reminders, and Tentative/Confirmed)
+          </para>
+	  <para>
+            You can alter those settings later by clicking once on the
+            event in the <interface>calendar view</interface> to
+            select it, and then choosing <guimenuitem>Event
+            Properties</guimenuitem> from the
+            <guimenu>Settings</guimenu> menu.
+          </para>
+	</sect2>
+
+	<sect2 id="usage-calendar-apts-group">
+	  <title>Appointments for Groups</title>
+	  <para>
+            If you have your calendar set up to work with other
+            calendars over a network, you can see when others are
+            available to meet with you.  To browse other people's
+            calendars over your local network, do this: 
+          </para>
+	  <para>
+            In addition, you can use
+            <application>Evolution</application> to mark a meeting
+            request on another person's calendar.  To do so, first
+            select <guimenuitem>New Appointment</guimenuitem> from the
+            <guimenu>MENU</guimenu>, or press <keysym>KEYSYM</keysym>
+            to bring up the <interface>new event</interface> window.
+            Then describe the event as you would any other.  Before
+            you click <guibutton>OK</guibutton>, (INSERT DESCRIPTION
+            HERE...).  <application>Evolution</application> will
+            automatically send email to each person on the request
+            list, notifying of the time and date of the meeting you
+            have requested with them.  In addition, it will mark the
+            event on your calendar and on theirs as tentative, rather than 
+            a confirmed, event.
+          </para>
+	  <para>
+            To mark a tentative event as confirmed, click once on the
+            event in the <interface>calendar view</interface> to
+            select it, and then choose <guimenuitem>Event
+            Properties</guimenuitem> from the
+            <guimenu>Settings</guimenu> menu.  In the <interface>Event
+            Properties</interface> dialog window, click the
+            "tentative" button to un-mark the event. (NOTE THAT this
+            feature may not at all exist!)
+          </para>
+	</sect2>
+	
+	<sect2 id="usage-calendar-apts-privs">
+	 <title>Scheduling privileges</title>
+	  <para>
+            There are several levels of scheduling privileges.  You
+            can set whether people can see your calendar, whether they
+            can request meetings or appointments, and whether they can
+            create appointments.  This section may have to be deleted,
+            because I don't know if we are going to support privileges
+            at all.
+          </para>
+	</sect2>
+      </sect1>
+
+      <sect1 id="usage-calendar-organize">
+	<title>Organizing your Appointments</title>
+	<para>
+           Until I have <application>Evolution</application> running properly,
+           I have no idea how this sort of organization will actually work.
+        </para>
+	<para>
+           But this section will have at least two paragraphs, and
+           probably a screenshot.
+        </para>
+      </sect1>
+    </chapter>
diff --git a/doc/C/usage-contact.sgml b/doc/C/usage-contact.sgml
new file mode 100644
index 0000000000..f88a3d5791
--- /dev/null
+++ b/doc/C/usage-contact.sgml
@@ -0,0 +1,283 @@
+
+    <chapter id="usage-contact">
+      <title>The Evolution Contact Manager</title>
+      <para>
+          The <application>Evolution</application> contact manager can
+          handle all of the functions of an address book, phone book,
+          or Rolodex.  Of course, <application>Evolution</application>
+          allows easier updates than an actual paper book, and much
+          easier synchronization with handheld and remote devices. And
+          I doubt that you can take your little black book and make it
+          accessible to the rest of your office over a network.  Since
+          <application>Evolution</application> supports most major
+          network protocols, including <glossterm>IMAP</glossterm> and
+          <glossterm>LDAP</glossterm>, it's easy to use over an
+          existing network.
+        </para>
+	<para>
+          Antother advantage of <application>Evolution</application>
+          is that the address book is integrated into the rest of
+          the application.  That means that when you look for
+          someone's address, you can also see a history of
+          appointments with that person, and when you get an email
+          with contact information in it, you can create a new address
+          card very quickly.  In addition, searches, folders, and
+          vFolders all work in the same intuitive way they do in the
+          other components, so you don't have to learn another system
+          for similar tasks.
+        </para>
+	<para>
+          This chaper will cover the usage of the
+          <application>Evolution</application> contact manager,
+          including organizing large amounts of contact data, sharing
+          addresses over a network, and the automation 
+          capabilities of the address book.  Contact manager
+          configuration is addressed in <xref
+          linkend="config-prefs-contact">.
+        </para>
+
+      <sect1 id="usage-contact-basic">
+	<title>Getting Started With the Contact Manager</title>	
+
+	<para>
+          To start managing your contacts, click on
+          <guibutton>Contacts</guibutton> in the shortcut bar.
+        </para>
+	<para>
+          Describe the interface.  Include the fact that the
+          whole book consists of a set of cards, organized into
+          folders.
+        </para>
+      </sect1>
+      <sect1 id="usage-contact-cards">
+	<title>Creating, Deleting, and Adding Cards</title>
+	<para>
+          You can create a new card by pressing the <guibutton>New
+          Card</guibutton> button, or by pressing
+          <keysym>KEYSYM</keysym>. The <interface>New Card</interface>
+          window will appear.  It has the following fields:
+
+          <itemizedlist>
+            <listitem> <para>
+               <guilabel>Name:</guilabel> Enter the person's name here
+            </para></listitem>
+            <listitem> <para>
+
+            </para></listitem>
+            <listitem> <para>
+              <guilabel>Address:</guilabel>
+            </para></listitem>
+
+            <listitem> <para>
+                 Something
+            </para></listitem>
+
+            <listitem> <para>
+               Something
+            </para></listitem>
+	  </itemizedlist>
+        </para>
+	<para>
+           You can choose which fields an address card has, and create
+	   new fields for cards.  For example,
+	   <application>Evolution</application> provides for two line
+	   postal addresses by default, but you may have as many or as
+	   few lines to an address as you wish.  To change which
+	   fields an address card has, choose DESCRIBE HERE HOW TO DO
+	   THIS
+        </para>
+
+	<note>
+	  <title>Quick ways to add cards</title>
+	  <para>
+            You can add cards from within an email message or calendar
+            appointment.  While looking at an email, right-click on
+            any email address or message, and choose
+            <guimenuitem>Create Card for this Address</guimenuitem> or
+            <guimenuitem>Create Card for this Sender</guimenuitem>from
+            the menu that appears.  While looking at a calendar
+            appointment, right-click any email address, and choose
+            <guimenuitem>Create Card for this Address</guimenuitem>.
+            (NOTE that feature may change! unimplemented!)
+          </para>
+	</note>
+
+	<para>
+          You delete a card by pressing the <guibutton>Delete
+          Card</guibutton> button, or by dragging it into the trash folder.
+        </para>
+
+	<para>
+          You can move cards around just as you would with email:
+          dragging and dropping works, as does right-clicking and
+          selecting <guimenuitem>Move</guimenuitem> from the menu
+          that appears.
+        </para>
+      </sect1>
+
+      <sect1 id="usage-contact-organize">
+	<title>Organizing your Contact Manager</title>
+	<para>
+          Organizing your contact manager is a lot like organizing
+          your mail.  You can have folders and searches the same way
+          you can with mail, but the contact manager does not allow
+          vFolders.  It does, however, allow each card to fall under
+          several categories, and allow you to create your own
+          categories.  We'll go over categories in a bit.
+        </para>
+	<para>
+          Another useful UNIMPLEMENTED
+          <application>Evolution</application> feature is its ability
+          to recognize when people live together.  If two people in
+          your contact manager share an address, and you change the
+          address for one of them, Evolution will ask you if you wish
+          to change the address for both of them, or just for one.
+        </para>
+
+	<sect2 id="usage-contact-organize-group">
+	  <title>Groups of contacts</title>
+	  <para>
+             <application>Evolution</application> lets you put cards
+             into folders, mark them as members of different groups,
+             and search through them in a variety of ways.  This
+             section will describe how to organize and find contact
+             information using <application>Evolution</application>.
+             CHANGE THIS paragraph: it needs a great deal of work.
+          </para>
+
+	  <sect3 id="usage-contact-organize-group-folder">
+	    <title>Grouping with Folders</title>
+	    <para>
+	      The simplest way to group address cards is to use
+	      folders.  By default, cards start in the
+	      <guilabel>Contacts</guilabel> folder.  You can create
+	      more folders inside that one, or create other address
+	      book folders as well.  Each card must be in one and only
+	      one folder.
+	    </para>
+	    <para>
+              To create a new folder, do this:
+	    </para>
+	    <para>
+              To put a card into a folder, do this:
+            </para>
+	  </sect3>
+
+	  <sect3 id="usage-contact-organize-group-category">
+	    <title>Grouping with Categories</title>
+	    <para>
+              The other way to group cards is to mark them as
+              belonging to different categories.  The difference
+              between folders and categories is that folders contain
+              cards, but category membership is a property of each
+              card.  That means that you can mark a card as being in
+              several categories or no category at all.  For example,
+              I put my friend Matthew's card in the "Business" category,
+              because he works with me, the "Friends" category, because
+              he's also my friend, and the "Frequent" category, because
+              I call him all the time and can never remember his phone
+              number.
+            </para>
+	    <para>
+              To mark a card as belonging to a category, do this:
+            </para>
+	    <para>
+              Then, you can refer to all the cards in that category
+              by:
+            </para>
+	    <para>
+              If the default categories don't suit you, you can add
+              your own.  Here's how:
+            </para>
+	  </sect3>
+	</sect2>
+      </sect1>
+
+      <sect1 id="usage-contact-sharing">
+	<title>Sharing your cards (Or Keeping them to Yourself)</title>
+	<para>
+           Cards can be shared over a network.  This is the sort of
+           feature you'll want to use if your company has a list of
+           vendors and clients that needs constant updating.  If you
+           also share your calendars, people can avoid duplicating
+           work and keep up to date on developments within their
+           workgroup or across the entire company.
+        </para>
+
+         <example id="usage-contact-sharing-ex">
+            <title>Sharing Address Cards and Calendar Data</title>
+	      <para>
+	        I want to schedule a meeting with someone at Company
+                X, but I'm not sure who to talk to there.  Our
+                corporate network has an address card that states our
+                contacts there, so I know whom to call.  Since we also
+                share the calendars, I know that Deanna has already
+                scheduled a meeting with them next Thursday, and I can
+                just ask her to bring up my concerns at the meeting.
+             </para>
+	  </example>
+
+	<para>
+           Of course, you don't want to share all of your cards&mdash;
+           why overload the network with a list of babysitters, or
+           tell everyone on your network you're talking to new job
+           prospects?  <application>Evolution</application> lets you
+           decide which folders you want to make accessible to others.
+        </para>
+	<para>
+           To begin sharing a folder of address cards, select <!--
+           DESCRIBE PROCESS HERE -->.  The
+           <interface>Sharing</interface> will pop up.  It contains:
+           <!--DESCRIBE INTERFACE HERE-->
+        </para>
+      </sect1>
+
+      <sect1 id="usage-contact-automate">
+	<title>Automating the Contact Manager</title>
+	<para>
+          The <application> Evolution</application> contact manager
+          can perform a wide variety of tasks for you.  From speeding
+          up basic tasks like adding a new address card to managing
+          mailing lists, you'll find that the contact manager is more
+          than a mere address book.
+        </para>
+	<sect2 id="contact-automation-basic">
+	  <title>Send me a card: Adding New Cards Quickly</title>
+	  <para>
+            When you get information in the mail or in a calendar
+            entry, you can add it to an address card.  To do so, right
+            click on any email address or email message, and select
+            <guimenuitem>Add Address Card</guimenuitem> from the menu
+            that appears.  Of course, <application>
+            Evolution</application> adds cards from a hand-held device
+            during HotSync operation.  For more information about
+            that, see <xref linkend="usage-sync">.
+          </para>
+	</sect2>
+
+	<sect2 id="contact-automation-lists">
+	  <title>Managing a Mailing list</title>
+	  <para>
+             You already know that when you are writing an email, you
+             can address it to one or more people, and that
+             <application>Evolution</application> will fill in
+             addresses from your contact manager's address cards if
+             you let it.  In addition to that, you can send email to
+             everyone in a particular group by doing SOMETHING HERE.
+             Future versions of <application>Evolution</application>
+             will allow you to you export a group of cards to a
+             spreadsheet, database, or word processor so you can print
+             address labels or prepare large postal mailings.
+          </para>
+	</sect2>
+	<sect2 id="usage-contact-automation-extra">
+	  <title>Map It! and other extra features</title>
+	  <para>
+             Need a map or directions? Click
+             <guibutton>MapIt</guibutton> from within the contact
+             manager, and <application>Evolution</application> will
+             map the address for you online.
+          </para>
+	</sect2>
+      </sect1>
+    </chapter> 
\ No newline at end of file
diff --git a/doc/C/usage-mail.sgml b/doc/C/usage-mail.sgml
new file mode 100644
index 0000000000..c81c384cfb
--- /dev/null
+++ b/doc/C/usage-mail.sgml
@@ -0,0 +1,644 @@
+
+    <chapter id="usage-mail"> 
+      <title>Evolution Mail: Witty Phrase to Come Later</title>
+      <abstract>
+	<title> An Overview of the Evolution Mailer</title>
+	<para>
+          Email is an integral part of life these days, and
+          <application>Evolution</application> mail is here to help
+          you keep track of it.  <application>Evolution</application>
+          email is like other email programs in all the ways you would
+          hope: (INSERT GOOD SIMILARITIES).
+        </para>
+        <para>
+          However, <application>Evolution</application> has some
+          important differences.  First, it's built to handle very
+          large amounts of mail without slowing down or crashing.  We
+          had high mail volumes in mind when we designed our <link
+          linkend="usage-mail-organize-filters">filtering</link> and
+          <link linkend="usage-mail-organize-search">searching</link>
+          functions.  There's also the
+          <application>Evolution</application> <link
+          linkend="usage-mail-organize-vFolders">vFolder</link>, an
+          advanced organizational feature not found in other mail
+          clients.  If you get a lot of mail, or if you keep every
+          message you get in case you need to refer to it later,
+          you'll find that feature especially useful.
+        </para>
+        
+	<para>
+           You can start reading email by clicking
+           <guibutton>Inbox</guibutton> in the shortcut bar.
+        </para>
+      </abstract>
+   
+      <sect1 id="usage-mail-getnsend">
+	<title>Reading, Getting and Sending Mail</title>
+	<sect2 id="usage-mail-getnsend-read">
+	  <title>Reading a Message</title>
+	  <para>
+            The first time you open your
+            <application>Evolution</application>
+            <guilabel>Inbox</guilabel>, you will see a window like the
+            one in <xref linkend="usage-mail-intro-fig">, with a
+            message from Helix Code in the<interface> message
+            list</interface>.  A preview of the message is displayed
+            below that, in the <interface>view pane</interface>.  If
+            you find the<interface> view pane</interface> too small,
+            you can double-click on the message in the
+            <interface>message list</interface> to have it open in a
+            new window.  As is the case with folders, you can
+            right-click on messages in the message list and get a 
+            menu of possible actions.
+          </para>
+	  <para>
+            Go ahead and right-click on the message, and select
+            <guimenuitem>Delete Message</guimenuitem> from the menu
+            that appears.  The message will move into the
+            <guilabel>Trash</guilabel> folder.  If you want to keep
+            it, you can open the <guilabel>Trash</guilabel> folder
+            and drag the message back to your
+            <guilabel>Inbox</guilabel>.  The trash will be
+            automatically emptied the next time you quit
+            <application>Evolution</application>. (FEATURE
+            UNIMPLEMENTED! Text may change to fit featureset)
+ 
+     <!-- ==============Figure=================================== -->
+     <!-- MAKE SURE THIS SCREENSHOT HAS THE WELCOME MESSAGE! -->
+	  <figure id="usage-mail-intro-fig">
+	      <title>Evolution Mail</title>
+	      <screenshot>
+		<screeninfo>Evolution Mail</screeninfo>
+		<graphic fileref="mail-intro-pic" format="png" srccredit="Aaron Weber">
+	    </graphic>
+	    </screenshot>
+	  </figure>
+   <!-- ==============End of Figure=================================== -->
+          </para>
+	</sect2>
+	
+	<sect2 id="usage-mail-getnsend-get">
+	  <title>Getting Mail</title>
+	  <para>
+            To check your email, just click <guibutton>Send and
+            Receive</guibutton> in the toolbar.
+            <application>Evolution</application> will download your
+            mail for you and send any mail you've marked ready to
+            send. New mail will appear in your
+            <interface>Inbox</interface> and also in the
+            <interface>Today View</interface>.
+          </para>
+	  <para>
+             If you get an error message, you probably need to
+            change your network preferences.  To do that, you can run
+            the setup assistant again, have a look at <xref
+            linkend="config-prefs-network">, or ask your system
+            administrator.
+          </para>
+
+	  <sect3 id="usage-mail-getnsend-get-attach">
+	    <title>Attachments, HTML Mail, and Live Documents</title>
+	    <para>
+              If you receive a file attached to an email,
+              <application>Evolution</application> will ask where you
+              want to put it.  Once you've downloaded it, you can
+              open, move, copy, or execute those files just like any
+              others, using <application>Nautilus</application> or
+              your favorite shell or file manager.
+            </para>
+	    <para>
+               <application>Evolution</application> can also display
+               HTML-formatted mail, complete with graphics.  HTML
+               formatting will display automatically, although you can
+               turn it off if you prefer.
+            </para>
+	    <para>
+               It can also display <glossterm>live
+               documents</glossterm>, which have scripted or
+               executable contents&mdash; for example, a working
+               spreadsheet page or a chess game.
+            </para>
+	    <tip id="badidea-attachment">
+	      <title>Bad Idea</title>
+	      <para>
+                When someone you don't know sends you an attached
+                program, go ahead and run it.  Set your preferences to
+                always run live documents when you recieve them, too.
+                Everybody knows all that virus stuff is just a Windows
+                problem.
+              </para>
+	    </tip>
+	  </sect3>
+	</sect2>
+	
+	<sect2 id="usage-mail-getnsend-send">
+	  <title>Writing and Sending Mail</title>
+	  <para>
+             You can start writing a new
+             email message by selecting <guimenuitem>New
+             Mail</guimenuitem> from the <guimenu>File Menu</guimenu>,
+             or by pressing <keysym>Ctrl-N</keysym>.  When you do so,
+             the <interface>New Message</interface> window will open,
+             as shown in <xref linkend="usage-mail-newmsg-fig">.
+          </para>
+
+<!--   ==============Figure=================================== -->
+	   <figure id="usage-mail-newmsg-fig">
+	     <title>New Message Window</title>
+	     <screenshot>
+	      <screeninfo>Evolution Main Window</screeninfo>
+	      <graphic fileref="newmsg-pic" format="png" srccredit="Aaron Weber">
+	    </graphic>
+	    </screenshot>
+	  </figure>
+<!-- ==============End of Figure=================================== -->
+	 
+	  <para>	  
+             Enter an address in the <guilabel>To:</guilabel> field, a
+             message in the <guilabel>Message:</guilabel> field, and
+             press <guibutton>Send and Receive</guibutton>.  That's
+             easy.  It may even be too easy, which is why I like to
+             queue my messages up to be sent a few minutes later.
+
+	     <tip id="usage-mail-getnsend-send-attach-tip">
+	      <title>Send Now, Send Later</title>
+	      <para>
+                Evolution will send mail immediately unless you tell
+                it to do otherwise by selecting <guimenuitem>Send
+                Later</guimenuitem> from the <guimenu>MENU</guimenu>.
+                Then, when you press <guibutton>Send &
+                Receive</guibutton>, all your unsent messages will go
+                out at once.  I like to use "Send Later" because it
+                gives me a chance to change my mind about a message
+                before it goes out.  That way, I don't send anything I'll
+                regret the next day.
+              </para>
+	      <para>
+                To learn more about how you can specify message queue
+                and filter behavior, see <xref linkend="config-prefs-mail">.
+              </para>
+	     </tip>
+           </para>
+
+	  <para>
+            There is more to sending mail, though.  In the
+            next few sections, we'll go over additional features,
+            including mailing lists, attachments, and forwarding.
+          </para>
+
+   
+	  <sect3 id="usage-mail-getnsend-send-to">
+	    <title>Choosing Recipients</title>
+	    <para>
+              If you have created address cards in the contact
+	      manager, you can also enter nicknames or other portions
+	      of address data, and
+	      <application>Evolution</application> will complete the
+	      address for you. (INSERT description of UI for this
+	      feature, once it is decided upon). If you enter a name
+	      or nickname that can go with more than one card,
+	      Evolution will open a dialog box to ask you which person
+	      you meant.  (QUESTION: will users be able to drag & drop
+	      address cards to send email?).  For more information
+	      about using email together with the contact manager and
+	      the calendar, see <xref
+	      linkend="usage-contact-automate"> and <xref
+	      linkend="usage-calendar-apts-group">.
+            </para>
+	    <para>
+              In addition, you can mark recipients in three different
+              ways.  The <guilabel>To:</guilabel> field is for the
+              primary recipients of the message you are going to send.
+              However, it is considered bad form to have more than a
+              few email addresses in this section.
+            </para>
+	    <para>
+              If you're writing to one person, but want to keep a
+              third party up to date, you can use
+              <guilabel>Cc:</guilabel>.  Hearkening back to the dark
+              ages when people used typewriters and there were no copy
+              machines, "Cc" stands for "Carbon Copy."  Use it
+              whenever you want to share a message you've written to
+              someone else.
+              <example>
+		<title>Using the Cc: field</title>
+		<para>
+                   Say, for example, Susan sends an email to a client.
+                   She puts her co-worker, Tim, in the in the
+                   <guilabel>Cc:</guilabel> field, so that he know
+                   what's going on.  The client can see that Tim also
+                   recieved the message, and know that they can talk
+                   to Tim about the message as well.
+                </para>
+	      </example>
+            </para>
+	    <para>
+              If you have a large number of recipients, or if you want
+              to send mail to several people without sharing the
+              recipient list, you should use
+              <guilabel>BCc:</guilabel>. "BCc" stands for "Blind
+              Carbon Copy", and means that addresses in the
+              <guilabel>BCc:</guilabel> field will receive copies of
+              the message, but they will not receive the list of the
+              other recipients' addresses, nor will other recipients
+              know that they have recieved the message.  When I send a
+              generic message to all my friends and I want them to
+              think I've written a personalized email to every one of
+              them, I put them all in the <guilabel>BCc:</guilabel>
+              list.
+            </para>
+	  </sect3>
+
+       <sect3 id="usage-mail-getnsend-send-reply">
+	    <title>Replying to Messages</title>
+	    <para>
+               In order to reply to a message, click on it once in the
+               message list to select it.  Then press the
+               <guibutton>Reply</guibutton> button, or use the
+               <keysym>REPLY COMBO</keysym> hot key.  A window like
+               the <interface>New Message</interface> window will
+               appear, but the subject will already be present&mdash;
+               typically, your new message will have the same subject
+               as the message to which you are replying, but with Re:
+               before it, to mark it as a reply.  In addition, the
+               full text of the previous message may be inserted into
+               the new message, with the &gt; character before each
+               line.  This indicates quoting.  You can intersperse
+               your message with the quoted material as shown in <xref
+               linkend="usage-mail-getnsend-reply-fig">
+
+<!-- note that this figure should have a reply mail ready to send, with quoted materials and the relevant replies interspersed-->
+<!--   ==============Figure=================================== -->
+	   <figure id="usage-mail-getnsend-reply-fig">
+	     <title>Reply Message Window</title>
+	     <screenshot>
+	      <screeninfo>Evolution Main Window</screeninfo>
+	      <graphic fileref="replymsg-pic" format="png" srccredit="Aaron Weber">
+	    </graphic>
+	    </screenshot>
+	  </figure>
+<!-- ==============End of Figure=================================== -->
+
+            </para>
+
+	    <para>
+              If a message has several recipients, as in the case of
+              mailing lists or messages that have been carbon copied,
+              you may wish to select one of the items under the
+              <guimenuitem>Reply-To</guimenuitem> submenu on the
+              <guimenu>MENU</guimenu> menu.  This will allow you to
+              choose one or several of the other message recipients in
+              addition to the person who originally sent you the
+              message.  
+              <example>
+		<title>Using the Reply-To feature</title>
+		<para>
+                  Returning to the previous example, the client can
+                  decide whether to reply just to Susan, just to Tim,
+                  or to both of them by selecting a menu item, rather
+                  than by cutting and pasting the email addresses.  If
+                  there are large numbers of people in the Cc: fields,
+                  this can save substantial amounts of time.
+                </para>
+	      </example>
+            </para>
+	  </sect3>
+
+	  
+	  <sect3 id="usage-mail-getnsend-send-fancy">
+	    <title>Embellishing that email</title>
+	    <para>
+               <application>Evolution</application> allows you to 
+                make your email more attractive in a number of ways. You
+                can send messages formatted with HTML, attach any sort
+                of file to them, and even include live documents, like
+                spreadhseets or chess games.  This section will tell
+                you how.
+            </para>
+
+	    
+	    <sect4 id="usage-mail-getnsend-send-html">
+	      <title>Colors, pictures, and fonts with HTML Mail</title> 
+	      <para>
+                Most email messages are sent as plain text, but they
+                can also be sent as HTML, which means they can include
+                color, text style, and other formatting information.
+                Evolution will read and display HTML properly without
+                trouble, and also allows you to send outgoing
+                email messages as HTML.  To send an HTML message, just
+                use the composition toolbar to add formatting;
+                your message text will appear formatted in the composer
+                window, and the message will be sent as HTML.
+              </para>
+	      <note>
+		<title>A Technical note on HTML Tags</title>
+                <para>
+		  Any text, including HTML tags, entered into the
+                  message composition window is assumed to be plain
+                  text.  If you enter HTML directly into the
+                  composer&mdash; say, <markup
+                  role="html">&lt;BR&gt;Bold Text&lt;/BR&gt</markup>,
+                  the the composer will assume you meant exactly that,
+                  and not "make this text bold," as a HTML composition
+                  tool would.  For the technically inclined, that
+                  means that when the text <markup
+                  role="html">&lt;BR&gt</markup> is sent as HTML, it
+                  will be converted to the string
+                  <literal>&amp;lt;BR&amp;gt;</literal>.
+                </para>
+	      </note>
+	      <para>
+                Some people do not have HTML-capable mail clients, or
+                prefer not to receive HTML-enhanced mail because it
+                is slower to download and display.  Some people refer
+                to HTML mail as "the root of all evil" and get very
+                angry if you send them HTML mail, which is why the
+                default in <application>Evolution</application> is
+                plain text.  If you have an address book entry for
+                someone who does not wish to receive HTML-enhanced
+                mail, you can note that preference in their address
+                card.  The mailer will automatically strip the HTML
+                tags from any messages you send to that address.
+              </para>
+	    </sect4>
+      
+	    <sect4 id="usage-mail-getnsend-send-attach">
+	      <title>Attachments</title>
+	      <para>
+                If you want to attach a file to your email message,
+                you can do so by <!--describe process here-->.  If
+                your recipients can read HTML mail, you can put an
+                image inside the mail by dragging the file into the
+                composer window, or by selecting (INSERT DESCRIPTION
+                HERE) (IS THIS CORRECT?).  Still, unless you know what
+                email client the recipient is using, it's best to send
+                a message or attachment in the simplest manner
+                possible.
+              </para>
+	    </sect4>
+	    <sect4 id="usage-mail-getnsend-send-live">
+	      <title></title>
+	      <para>
+                Later versions of <application>Evolution</application>
+                will allow you to enliven your email with almost any
+                sort of document, and even with entire
+                applications. At this point, however, I don't know how
+                that will work.
+              </para>
+	    </sect4>
+	  </sect3>
+       
+	  <sect3 id="usage-getnsend-fwd">
+	    <title>Forwarding Mail</title>      
+	    <para>
+              <guilabel>Forward</guilabel> is useful if you have
+	      received a message and you think someone else would like
+	      to see it, or if you get a message intended for someone
+	      else.  You can forward a message as an attachment to a
+	      new message (the default way of forwarding) or you can send it
+	      <glossterm>inline</glossterm> as a quoted portion of the
+	      message you are sending.  Attachment forwarding is best
+	      if you want to send the entire message you received,
+	      unaltered.  Inline forwarding is best if you want to
+	      send portions of a message, or if you have a large
+	      number of comments on different sections of the message
+	      you are forwarding.  Remember to note from whom the
+	      message came, and where, if at all, you have removed or
+	      altered content.
+            </para>
+	    <para>
+              To forward a message, first make sure it is selected by
+              clicking it once in the message list.  Then, press
+              <guibutton>Forward</guibutton> on the toolbar, or select
+              SOMETHING.  To forward a message inline instead of as an
+              attachment, DO SOMETHING ELSE.  Choose an addressee as
+              you would when sending a new message; the subject will
+              already be entered, but you can alter it.  Enter your
+              comments on the message in the <interface>composition
+              frame</interface>, and press <guibutton>Send and
+              Receive</guibutton>.  To forward it
+              <glossterm>inline</glossterm> instead of attached,
+              select <guimenuitem>Forward Inline</guimenuitem> from
+              the <guimenu>Message</guimenu> menu.
+            </para>
+	  </sect3>
+	  <sect3 id="usage-mail-getnsend-ettiquette">
+	    <title>Seven Tips for Email Usage</title>
+	    <para>
+              I started with ten, but four were "Don't send
+              <glossterm>spam</glossterm>."
+              <itemizedlist>
+  	        <listitem>
+		  <para>
+                    Always begin and close with a salutation. Say
+                    "please" and "thank you", just like you do in real
+                    life. You can keep your pleasantries short, but be pleasant!
+                  </para>
+		</listitem>
+	      
+		<listitem>
+		  <para>
+                    ALL CAPS MEANS YOU'RE SHOUTING!
+                  </para>
+		</listitem>
+	      
+		<listitem>
+		  <para>
+                     Never write anything in email you wouldn't say in
+                     public.  Old messages have a nasty habit of
+                     resurfacing when you least expect them to.
+                  </para>
+		</listitem>
+	      
+		<listitem>
+		  <para>
+                   Check your spelling and use complete sentences.
+                  </para>
+		</listitem>
+	     
+		<listitem>
+		  <para>
+                    Don't send nasty emails (flames).  If you get one,
+		    don't write back.
+                  </para>
+		</listitem>
+
+		<listitem>
+		  <para>
+                     Don't send spam or forward chain mail.  If you
+                     must, verify any rumors, and make sure the
+                     message doesn't have multiple layers of email
+                     quotation symbols (&gt;) indicating multiple
+                     layers of careless inline forwarding.
+                  </para>
+		</listitem>
+
+		<listitem>
+		  <para>
+                     When you reply or forward, include just enough of
+		     the previous message to provide context. Not too
+		     much, not too little.
+                   </para>
+		</listitem>
+	      </itemizedlist>
+            </para>
+	    <para> Happy mailing! </para>
+	  </sect3>
+	</sect2>
+      </sect1>
+
+      <sect1 id="usage-mail-organize">
+	<title>Organizing Your Mail</title>
+	<para>
+          Even if you only get a few email messages a day, you
+          probably want to sort and organize them.  When you get a
+          hundred a day and you want to refer to a message you
+          received six weeks ago, you need to sort and organize them,
+          and <application>Evolution</application> has the tools to
+          help you do it.  
+        </para>
+	
+	<sect2 id="usage-mail-organize-folders">
+	  <title>Getting Organized with Folders</title>
+	  <para>
+            You can create new folders by selecting
+            <guimenuitem>ITEM</guimenuitem> from the
+            <guimenu>MENU</guimenu>, or by pressing
+            <keysym>COMBO</keysym>.  (Will there be a dialog box to
+            determine name and location? Must wait for feature to
+            describe) The new folders will appear in the
+            <interface>tree view</interface>, and you can drag them
+            wherever you want to relocate them.  You can move messages
+            into them by dragging, or by selecting them and choosing
+            <guimenuitem>ITEM</guimenuitem> from the
+            <guimenu>MENU</guimenu>.  An email message can be in only
+            one folder at a time, just like real mail in real folders.
+            This is also the case for folders of address cards and calendar
+            information.
+          </para>
+	</sect2>    
+
+	<sect2 id="usage-mail-organize-search">
+	  <title>Searching for Messages</title>
+	  <para>
+            Because <application>Evolution</application> automatically
+            creates an index of every email you send or receive, it
+            can search through your old messages and present you with
+            results very quickly.  You can search for messages by
+            author, subject, keyword, or headers. (INSERT descriptons
+            of what those terms mean)
+          </para>
+          <para>
+            (INSERT the way one creates a search and so forth)
+          </para>
+	</sect2>
+    
+	<sect2 id="usage-mail-organize-vFolders">
+	  <title>Getting Really Organized with Virtual Folders</title>
+	  <para>
+            If you find yourself performing a search frequently, you
+            can save it as a virtual folder. Virtual folders, or
+            vFolders, are an advanced way of viewing your email
+            messages within <application>Evolution</application>.  If
+            you get a lot of mail or often forget where you put
+            messages, vFolders can help you stay on top of things.
+          </para>
+          <para>
+            A vFolder looks and acts a lot like a folder, but it's
+            actually a saved search that you can access in most of the
+            same ways you would a regular folder.  The one important
+            differences between them is that a conventional folder
+            actually contains messages, but a vFolder is a view of
+            messages that may be in several different folders.  This
+            means that while a message may fall into several vFolders,
+            it can be in only one conventional folder.  Also, it means
+            that you cannot remove a message from a vFolder unless you
+            delete it, and you cannot add a message to a vFolder
+            unless you change the vFolder's search criteria.
+          </para>
+	  <para>
+            As messages that meet the vFolder criteria arrive or are
+            deleted, <application>Evolution</application> will
+            automatically place them in and and remove them from the
+            vFolder contents list.  When you delete a message, it gets
+            erased from the folder it actually exists in as well as
+            any vFolders which include it.
+          </para>
+	  <para>
+            That's pretty complicated.  But it can be useful. For
+            example, if I have a folder for all the email from one
+            person, and another folder for all the email on a given
+            topic, I feel organized. But when the person sends me
+            mail about the topic, my whole email filing universe
+            becomes chaotic.  I need vFolders to save the day for me.
+          </para>
+	  <para>
+            That sounds silly, but imagine a business trying to keep
+	    track of mail from hundreds of vendors and clients, or a
+	    university with overlapping and changing groups of
+	    faculty, staff, administrators and students.  The larger
+	    the system, the less you can afford that sort of
+	    confusion.  vFolders make for better organization because
+	    they can accept overlapping groups in a way that regular
+	    folders and filing systems can't.
+          </para>
+
+	  <example id="usage-mail-organize-vFolders-ex">
+	    <title>Using Folders, Searches, and vFolders</title>
+	    <para>
+	       To organize my mail box, I can set up a vFolder
+	       for emails from my friend Vince, by doing (INSERT
+	       PROCESS HERE).  Then, whenever I want to see the
+	       messages Vince has sent me, I open the vFolder, and
+	       every message he's sent me shows up, no matter where
+	       I've actually filed it.  If I want, I can also create a
+	       vFolder containing any message from my list of
+	       co-workers which also has the name of the project in
+	       it.  That way, when Vince sends me mail about the
+	       project, I can see that message both in the "Vince"
+	       vFolder and in the "Project" vFolder.  That's because
+	       when I open up the "Vince" folder, I'm really
+	       performing a search for all the mail from Vince, and
+	       when I open the "Project" folder I'm really performing
+	       a search for all the mail about the project.
+
+              (INSERT SCREENSHOT HERE)
+
+	    </para>
+	  </example>
+	</sect2>
+
+	<sect2 id="usage-mail-organize-filters">
+	  <title>Staying organized: Mail Filters in Evolution</title>
+	  <para>
+            Filters sort your email for you as it arrives in your
+            Inbox, so you don't have to sort them all yourself.
+            People who subscribe to multiple mailing lists find
+            filters especially helpful to sort personal from
+            list-related mail.  To create a filter, go to your
+            <interface>Inbox</interface>.  Then select BLAH BLAH BLAH.
+            This will open the <interface>filters</interface> window.
+          </para>
+
+          <para> 
+            The <interface>filters</interface> window contains the
+            following items: <!--DESCRIBE INTERFACE--> 
+          </para>
+	  
+	  <note>
+	    <title>Two Notable Filter Features</title>
+	    <para>
+              <itemizedlist>
+		<listitem><para>Any email that does not meet filter
+                action criteria remains in the Inbox. </para>
+                </listitem>
+		
+		<listitem><para>If you move a folder, your filters
+                will follow it.  </para></listitem>
+	      </itemizedlist>
+            </para>
+	  </note>
+	</sect2>
+      </sect1>
+    </chapter>
+<!-- ================ END OF MAILER CHAPTER ============= -->
diff --git a/doc/C/usage-mainwindow.sgml b/doc/C/usage-mainwindow.sgml
new file mode 100644
index 0000000000..8470189977
--- /dev/null
+++ b/doc/C/usage-mainwindow.sgml
@@ -0,0 +1,214 @@
+
+    <chapter id="usage-mainwindow">
+
+    <title>The Main Window: Evolution Basics</title>
+      <para>
+	After <application>Evolution</application> starts up, you will
+	see the <interface>main window</interface>, which looks a lot
+	like in <xref linkend="usage-mainwindow-fig">. On the left of
+	the <interface>main window</interface> are the
+	<interface>shortcut bar</interface> and the
+	<interface>tree-view</interface>.  Just underneath the title
+	bar is a series of menus in the <interface>menu
+	bar</interface>, and below that, the <interface>tool
+	bar</interface> with buttons for different functions. The
+	largest part of the <interface>main window</interface> is
+	taken up by a welcome message.  <!-- para does not end here
+	but after fig! -->
+
+<!-- ==============Figure=================================== -->
+
+<!--
+Make sure that this figure meets its descriptions below: it should
+show the shortcut bar, the tree view with some trees expanded, and so
+forth.  Can these things be labelled with little arrows & stuff?
+ -->
+
+	<figure id="usage-mainwindow-fig">
+	<title>Evolution Main Window</title>
+	<screenshot>
+	  <screeninfo>Evolution Main Window</screeninfo>
+	  <graphic fileref="mainwindow-pic" format="png" srccredit="Aaron Weber">
+	    </graphic>
+	</screenshot>
+	</figure>
+<!-- ==============End of Figure=================================== -->
+
+
+        <note>
+	  <title>The Way Evolution Looks</title>
+	  <para>
+ 	    The appearance of both
+	    <application>Evolution</application> and
+	    <application>GNOME</application> is very easy to
+	    customize, so your screen might not look like this
+	    picture.  You might configure
+	    <application>Evolution</application> to start with a
+	    different view, or without the <interface>shortcut
+	    bar</interface> or <interface>tree view</interface>.
+          </para>
+	</note>
+      </para>
+
+      <sect1 id="usage-mainwindow-shortcutbar">
+	<title>The Shortcut Bar</title>
+	<para>
+          The buttons in the <interface>shortcut bar</interface> give
+          you quick access to the different functions that
+          <application>Evolution</application> provides.
+        </para>
+	<para>
+          The buttons in the <interface>shortcut bar</interface> are:
+          <itemizedlist>
+	    <listitem>
+	      <para>
+                <guibutton>Today</guibutton>, which will bring up a summary
+                of any new messages you've recieved, along with the tasks and
+                appointments you have lined up for today.
+              </para>
+	    </listitem>
+
+	    <listitem>
+	      <para>
+                <guibutton>Inbox</guibutton>, which will show you all
+                of your email.  Your Inbox is also where you can
+                access Evolution's tools to filter, sort, organize,
+                and search your mail.
+              </para>
+	    </listitem>
+
+	    <listitem>
+	       <para>
+                  The <guibutton>Calendar</guibutton>, which can store
+                  appointments for you.  Connected to a network, you
+                  can use it to keep a group of people on schedule and
+                  up to date.
+               </para>
+            </listitem>
+
+	    <listitem>
+	      <para>
+                The <guibutton>Contacts</guibutton> tool holds your
+                addresses, phone numbers, and contact information.
+                Like calendar information, contact data can be
+                synchronized with hand-held devices and shared over a
+                network.  
+              </para>
+	    </listitem>
+
+	    <listitem>
+	      <para>
+                 The <guibutton>Tasks</guibutton> tool combines a "to
+                 do" list with reminders to help you keep track of
+                 daily events.
+              </para>
+	    </listitem>
+
+	    <listitem>
+	      <para> <guibutton>Notes</guibutton> is your catch-all
+                notepad: write <glossterm>haiku</glossterm>, take down
+                messages from phone conversations, or keep small
+                things organized.
+              </para>
+	    </listitem>
+	  </itemizedlist>
+
+
+        </para>
+	<para>
+          If you prefer to use a keyboard shortcut, or <glossterm>hot
+          key</glossterm>, you can use those instead.  They're
+          shown... (INSERT DESCRIPTION) You can also set your own hot
+          keys for functions that don't have any; this is covered in
+          <xref linkend="config">.  If you're using the keyboard
+          shortcuts you may also want to hide the <interface>shortcut
+          bar</interface> by selecting <guimenuitem>Hide/Show Shortcut
+          Bar</guimenuitem> from the <guimenu>MENU</guimenu> menu.
+        </para>
+     </sect1>
+
+      <sect1 id="usage-mainwindow-treeview">
+	<title>The Tree View</title>
+	<para>
+          The <interface>tree view</interface> is the most comprehensive way to
+          get to your information: it can show you everything you've
+          stored with <application>Evolution</application>
+          appointments, address cards, emails, and so forth.
+        
+          The <interface>tree view</interface> display presents your
+          data like a <glossterm>file tree</glossterm>&mdash; it
+          starts small at the top, and branches downwards. There are a
+          few folders you will always see, because they're at the top.
+          On my computer, they are: (ch. to itemizedlist w/descriptions?)
+          <simplelist>
+	    <member>Local Mail</member>
+	    <member>Remote Mail</member>
+	    <member>Address Book</member>
+	    <member>Calendar</member>
+	    <member>Trash</member>
+	  </simplelist>.
+        </para>
+
+	<para>
+          Right-clicking will bring up a menu for just about anything
+          in GNOME, and <application>Evolution</application> is no
+          exception.  If you right-click on a folder, you'll have a
+          menu with the following options:
+	  <itemizedlist>
+	    <listitem><para>Something</para></listitem>
+	    <listitem><para>Something</para></listitem>
+	    <listitem><para>Something</para></listitem>
+	  </itemizedlist>.
+        </para>
+
+	<tip>
+         <title>Context-Sensitive Help</title>
+	  <para>
+            You can almost always get help on an item by
+	    right-clicking it.  If you're not sure what something is,
+	    or don't know what you can do with it, right-clicking and
+	    choosing <guimenuitem>Help</guimenuitem> is a good way to
+	    find out.
+          </para>
+        </tip>
+	
+	<para>
+          If a folder has other folders in it, there will be a plus
+          sign next to it. Click on the plus sign, and you will see
+          the other folders inside.  This may change in the future to
+          something more attractive, like triangles that drop down as
+          you click on them to display the rest of the tree.
+        </para>
+
+	<para>
+          Any time new information arrives in a folder, that folder
+          will be highlighted, or its label displayed as bold
+          text. You can learn more about customizing
+          <application>Evolution</application> alerts and appearance
+          in <xref linkend="config">.
+        </para>
+
+	<para>
+          (CHANGE that title! THIS SECTION BELONGS SOMEWHERE ELSE!)
+          You can drag the folders inside the tree view to change
+          their order or put one folder inside another.  To delete a
+          folder, you can drag it into the trash folder.  The same
+          goes for individual messages, appointments, and address
+          cards, whether they're in the <interface>tree
+          view</interface> or not: drag them where you want them, and
+          they will go there. (IS THIS TRUE?)
+        </para>
+	<para>
+          You can also use the <guimenu>right-click menu</guimenu> to
+          move, rename, and delete folders.
+          <guimenuitem>Delete</guimenuitem> function from the
+          <guimenu>right-click menu</guimenu>.
+        </para>
+	<para>
+          Once you've familiarized yourself with the <interface>main
+          window</interface> you can start doing things with it.
+          We'll start with email: you've got a letter waiting for you
+          already.
+        </para>
+      </sect1>
+    </chapter>
\ No newline at end of file
diff --git a/doc/C/usage-setup.sgml b/doc/C/usage-setup.sgml
new file mode 100644
index 0000000000..1290b000bb
--- /dev/null
+++ b/doc/C/usage-setup.sgml
@@ -0,0 +1,46 @@
+   <chapter id="usage-setup">
+      <title>A Quick Start</title>
+      <para>
+        Start <application>Evolution</application> by selecting
+	<guimenuitem>Evolution</guimenuitem> from the
+	<guisubmenu>Applications</guisubmenu> of the <guimenu>Main
+	Panel Menu</guimenu>, or by typing
+	<command>evolution</command> at the command-line.  If this is
+	the first time you have run
+	<application>Evolution</application>, you'll be asked if you
+	want help setting up your email preferences.  If you don't
+	plan to use email, or if you'd rather configure your email
+	preferences later, select <guibutton>No</guibutton>, and it
+	will go away.  You can configure your email preferences later
+	by selecting SOMETHING from SOME MENU.
+      </para>
+      <para>
+         If you answer yes, it will guide you through the network
+	 configuration process.  It will ask you for the following
+	 information: (FLESH OUT THIS LIST!)
+        <itemizedlist>
+	  <listitem> <para>
+            Name&mdash; Your full name: eg. William Blake
+          </para></listitem>
+
+	  <listitem><para>
+                UserName&mdash; Your user or account name: eg. wblake
+          </para></listitem>
+	  <listitem><para>  
+             Type of Server&mdash; POP vs. SMTP vs....
+          </para></listitem>
+	  
+	  <listitem>
+	    <para>
+              TERM&mdash; DESCRIPTION
+            </para>
+	  </listitem>
+	  
+	  <listitem>
+	    <para>
+              TERM&mdash; DESCRIPTION
+            </para>
+	  </listitem>
+	</itemizedlist>
+      </para>
+    </chapter>
\ No newline at end of file
diff --git a/doc/C/usage-sync.sgml b/doc/C/usage-sync.sgml
new file mode 100644
index 0000000000..f28ebc10cc
--- /dev/null
+++ b/doc/C/usage-sync.sgml
@@ -0,0 +1,19 @@
+
+    <chapter id="usage-sync">
+      <title>Synchronizing with a Hand-held Device</title>
+      <para>
+        Once you've set up a synchronization system, it pretty much
+        takes care of itself.  Not only that, it's entirely possible
+        that your system administrator has set it up for you.  All
+        that this chapter covers is how to use that system once it's
+        installed and configured.  If you need to set it up, consult
+        <xref linkend="config-sync">.
+      </para>
+
+      <para>
+        If you've already got Gnome-pilot set up to use
+        <application>Evolution</application> all you need to do is put
+        your hand-held device on the cradle and press the HotSync
+        button.  No, really.  That's all there is to it.
+      </para>
+    </chapter>
\ No newline at end of file