#!/bin/sh
#
# Verifies that Evolution and all its supporting components
# are installed correctly. A tool to weed out common
# build problems.
#
# (C)2000 Helix Code, Inc.
# Author: Peter Williams <peterw@helixcode.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public License
# as published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU Library General Public License for more details.
#
# You should have received a copy of the GNU Library General Public
# License along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
problem() {
echo "I detected the following problem: $problem"
if test x"$rpmsystem" = xyes ; then
echo "Suggested solution via RPM: $rpmsolution"
fi
if test x"$debsystem" = xyes ; then
echo "Suggested solution via DEB: $debsolution"
fi
echo "Suggested solution via sources: $srcsolution"
if test x"$comment" != x ; then
echo ""
echo "$comment"
fi
exit 1
}
check_config() {
#bigname=$1
#cfgname=$2
#pkgname=$3
eval $1=\${$1-\`which $2\`}
eval val=\$$1
if test ! -x $val ; then
problem="Cannot find $2 or it ($val) is not executable"
rpmsolution="Install or reinstall the '$3-devel' package"
debsolution="Install or reinstall the $3 development libraries." #FIXME
srcsolution="Get the latest release of $3 and install it."
comment="If you know that $3 is installed, try setting the
environment variable $1 to its location"
problem
fi
}
check_prefix() {
#othercfg=$1
#othername=$2
eval otherpfx=\`\$$1 --prefix\`
if test x"$otherpfx" != x"$gl_prefix" ; then
problem="gnome-libs and $2 do not share the same prefix"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Re-run 'configure' in $2's source directory with the flag '--prefix=$gl_prefix."
problem
fi
}
check_sysconf() {
#othercfg=$1
#othername=$2
eval othersysc=\`\$$1 --sysconfdir\`
if test x"$othersysc" != x"$gl_sysconf" ; then
problem="gnome-libs and $2 do not share the same sysconfdir"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Re-run 'configure' in $2's source directory with the flag '--sysconfdir=$gl_sysconf."
problem
fi
}
check_oafinfo() {
#basename=$1
#othername=$2
if test ! -f ${gl_datadir}/oaf/$1.oafinfo ; then
problem="$1.oafinfo isn't installed into Gnome's prefix"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Re-run 'configure' in $2's source directory with the flag '--datadir=$gl_datadir."
comment="Another likely cause of this problem would be a failed installation of $2.
You should check to see that the install succeeded."
problem
fi
}
check_bin() {
#name=$1
#othername=$2
if test ! -f ${gl_bindir}/$1 ; then
problem="The binary $1 isn't installed into Gnome's prefix"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Re-run 'configure' in $2's source directory with the flag '--bindir=$gl_bindir."
comment="Another likely cause of this problem would be a failed installation of $2.
You should check to see that the install succeeded."
problem
fi
}
check_no_gnorba() {
#libs=$1
#othername=$2
ping=`echo $1 |grep 'gnorba'`
if test x"$ping" != x ; then
problem="$2 was built using Gnorba, not OAF"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Update $2 and re-run 'configure' in its source directory with the flag '--enable-oaf=yes."
problem
fi
}
########################################
versionparse3() {
#inst_version=$1
#reqd_version=$2
#package=$3
inst_version=`versiongrab3 "$1"`
inst_major=`echo $inst_version |sed -e 's,\([0-9][0-9]*\)\..*\..*,\1,'`
inst_minor=`echo $inst_version |sed -e 's,.*\.\([0-9][0-9]*\)\..*,\1,'`
inst_micro=`echo $inst_version |sed -e 's,.*\..*\.\([0-9][0-9]*\),\1,'`
reqd_version=`versiongrab3 "$2"`
reqd_major=`echo $reqd_version |sed -e 's,\([0-9][0-9]*\)\..*\..*,\1,'`
reqd_minor=`echo $reqd_version |sed -e 's,.*\.\([0-9][0-9]*\)\..*,\1,'`
reqd_micro=`echo $reqd_version |sed -e 's,.*\..*\.\([0-9][0-9]*\),\1,'`
ok=yes
if test $inst_major -lt $reqd_major ; then
ok=no
elif test $inst_major -gt $reqd_major ; then
ok=yes
elif test $inst_minor -lt $reqd_minor; then
ok=no
elif test $inst_minor -gt $reqd_minor; then
ok=yes
elif test $inst_micro -lt $reqd_micro; then
ok=no
fi
if test x$ok = xno ; then
problem="Package $3 is not new enough ($1 detected, $2 required)"
rpmsolution="Obtain a newer version and install it"
depsolution="Obtain a newer version and install it"
srcsolution="Obtain a newer version and install it"
comment="If you think you have a newer installation, make sure that the
package is not installed twice."
problem
fi
}
versiongrab3() {
echo $1 |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*,\1,'
}
check_module3() {
#$1=gnome-libs name
#$2=package
#$3=version
$GNOME_CONFIG --modversion $1 1>/dev/null 2>/dev/null </dev/null
if test x$? != x0 ; then
problem="Package $2 doesn't seem to be installed."
rpmsolution="Get and install the packages '$2' and '$2-devel'"
debsolution="Get and install the package $2 and its development libraries" #FIXME
srcsolution="Download the source and install the package $2"
comment="If you think the package is installed, check that its prefix is $gl_prefix --
${1}Conf.sh should be installed into `$GNOME_CONFIG --libdir`"
problem
fi
instversion=`$GNOME_CONFIG --modversion $1`
#eew eew hacky
# gnome-vfs used to be versioned gnome-vfs-0.1,
# and gnome-vfs-0.2, but then they moved to three figs--
# now it's gnome-vfs-0.2.0
if test $2 = gnome-vfs ; then
case "$instversion" in
gnome-vfs-0.1)
problem="Package gnome-vfs is not new enough (0.1 detected, $3 required)"
rpmsolution="Obtain a newer version and install it"
depsolution="Obtain a newer version and install it"
srcsolution="Obtain a newer version and install it"
comment="If you think you have a newer installation, make sure that the
package is not installed twice."
problem
;;
gnome-vfs-0.2)
instversion="gnome-vfs-0.2.0"
;;
*)
#nothing, version is ok
;;
esac
fi
versionparse3 "$instversion" "$3" "$2"
}
########################################
versionparse2() {
#inst_version=$1
#reqd_version=$2
#package=$3
inst_version=`versiongrab2 "$1"`
inst_major=`echo $inst_version |sed -e 's,\([0-9][0-9]*\)\..*,\1,'`
inst_minor=`echo $inst_version |sed -e 's,.*\.\([0-9][0-9]*\),\1,'`
reqd_version=`versiongrab2 "$2"`
reqd_major=`echo $reqd_version |sed -e 's,\([0-9][0-9]*\)\..*,\1,'`
reqd_minor=`echo $reqd_version |sed -e 's,.*\.\([0-9][0-9]*\),\1,'`
ok=yes
if test $inst_major -lt $reqd_major ; then
ok=no
elif test $inst_major -gt $reqd_major ; then
ok=yes
elif test $inst_minor -lt $reqd_minor; then
ok=no
fi
if test x$ok = xno ; then
problem="Package $3 is not new enough ($1 detected, $2 required)"
rpmsolution="Obtain a newer version and install it"
depsolution="Obtain a newer version and install it"
srcsolution="Obtain a newer version and install it"
comment="If you think you have a newer installation, make sure that the
package is not installed twice."
problem
fi
}
versiongrab2() {
echo $1 |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\).*,\1,'
}
check_module2() {
#$1=gnome-libs name
#$2=package
#$3=version
$GNOME_CONFIG --modversion $1 1>/dev/null 2>/dev/null </dev/null
if test x$? != x0 ; then
problem="Package $2 doesn't seem to be installed."
rpmsolution="Get and install the packages '$2' and '$2-devel'"
debsolution="Get and install the package $2 and its development libraries" #FIXME
srcsolution="Download the source and install the package $2"
comment="If you think the package is installed, check that its prefix is $gl_prefix --
${1}Conf.sh should be installed into `$GNOME_CONFIG --libdir`"
problem
fi
instversion=`$GNOME_CONFIG --modversion $1`
versionparse2 "$instversion" "$3" "$2"
}
########################################
#prep
if test -d /var/lib/rpm ; then
rpmsystem=yes
RPM=${RPM_PROG-`which rpm`}
$RPM --version 1>/dev/null 2>/dev/null </dev/null
if test x$? != x0 ; then
problem="The rpm executable ($RPM) does not seem to work."
rpmsolution="none, if rpm doesn't work."
debsolution="not applicable."
srcsolution="download and install rpm manually."
comment="If rpm really won't work then there is something wrong with your system."
problem
fi
else
rpmsystem=no
fi
if test -d /var/lib/dpkg ; then
debsystem=yes
#FIXME: check if deb works
else
debsystem=no
fi
if test x"$GNOME_PATH" != x ; then
PATH="$GNOME_PATH:$PATH"
fi
#gnome-libs
check_config GNOME_CONFIG gnome-config gnome-libs
gl_version=`$GNOME_CONFIG --version` # |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*,\1,'`
gl_sysconf=`$GNOME_CONFIG --sysconfdir`
gl_prefix=`$GNOME_CONFIG --prefix`
gl_datadir=`$GNOME_CONFIG --datadir`
gl_bindir=`$GNOME_CONFIG --bindir`
versionparse3 "$gl_version" "1.0.59" "gnome-libs"
#libunicode
check_config UNICODE_CONFIG unicode-config libunicode
check_prefix UNICODE_CONFIG libunicode
versionparse2 "`$UNICODE_CONFIG --version`" "0.4" libunicode
#ORBit
check_config ORBIT_CONFIG orbit-config ORBit
check_prefix ORBIT_CONFIG ORBit
#oaf
check_config OAF_CONFIG oaf-config oaf
check_prefix OAF_CONFIG oaf
versionparse3 "`$OAF_CONFIG --version`" "0.4.0" "oaf"
check_oafinfo oafd oaf
check_bin oafd
#gconf
check_config GCONF_CONFIG gconf-config GConf
check_prefix GCONF_CONFIG GConf
versionparse2 "`$GCONF_CONFIG --version`" "0.5" GConf
check_oafinfo gconfd GConf
check_bin gconfd
check_no_gnorba "`$GCONF_CONFIG --libs`" GConf
#gnome vfs
check_module3 vfs gnome-vfs "0.2.0"
check_no_gnorba "`$GNOME_CONFIG --libs vfs`" gnome-vfs
#gnome print
check_module2 print gnome-print "0.20"
check_no_gnorba "`$GNOME_CONFIG --libs print`" gnome-print
#bonobo
check_module2 bonobo bonobo "0.15"
check_oafinfo audio-ulaw bonobo
check_bin bonobo-audio-ulaw bonobo
check_no_gnorba "`$GNOME_CONFIG --libs bonobo`" bonobo
bn_libs=`$GNOME_CONFIG --libs bonobo`
ping=`echo $bn_libs |grep 'oaf'`
if test x"$ping" = x ; then
problem="Bonobo was not compiled with oaf enabled."
rpmsolution="Reinstall the packages 'bonobo' and 'bonobo-devel'."
debsolution="Reinstall Bonobo and its development libraries." #FIXME
srcsolution="Re-run 'configure' in Bonobo's source directory with the flag '--enable-oaf=yes'."
problem
fi
#gtkhtml
check_module2 gtkhtml GtkHTML "0.5"
check_oafinfo html-editor-control GtkHTML
check_bin html-editor-control GtkHTML
check_no_gnorba "`$GNOME_CONFIG --libs gtkhtml`" GtkHTML
#evolution
check_oafinfo addressbook evolution
check_oafinfo calendar-control evolution
check_oafinfo evolution-mail evolution
check_oafinfo evolution-calendar evolution
check_oafinfo evolution-addressbook-select-names evolution
check_oafinfo wombat evolution
check_bin evolution-mail evolution
check_bin evolution-calendar evolution
check_bin evolution-addressbook evolution
check_bin wombat evolution
check_bin evolution evolution
#done
echo "Your Gnome system appears to be properly set up. Enjoy Evolution!"
exit 0
