#!/bin/sh
#
# Verifies that Evolution and all its supporting components
# are installed correctly. A tool to weed out common
# build problems.
#
# (C)2000 Helix Code, Inc.
# Author: Peter Williams <peterw@helixcode.com>
#
# This program is free software; you can redistribute it and/or
# modify it under the terms of the GNU Library General Public License
# as published by the Free Software Foundation; either version 2 of
# the License, or (at your option) any later version.
#
# This program is distributed in the hope that it will be useful,
# but WITHOUT ANY WARRANTY; without even the implied warranty of
# MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
# GNU Library General Public License for more details.
#
# You should have received a copy of the GNU Library General Public
# License along with this program; if not, write to the Free Software
# Foundation, Inc., 675 Mass Ave, Cambridge, MA 02139, USA.
#
problem() {
echo "I detected the following problem: $problem"
if test x"$rpmsystem" = xyes ; then
echo "Suggested solution via RPM: $rpmsolution"
fi
if test x"$debsystem" = xyes ; then
echo "Suggested solution via DEB: $debsolution"
fi
echo "Suggested solution via sources: $srcsolution"
if test x"$comment" != x ; then
echo ""
echo "$comment"
fi
exit 1
}
check_config() {
#bigname=$1
#cfgname=$2
#pkgname=$3
eval $1=\${$1-$2}
eval val=\$$1
if type $val </dev/null 1>/dev/null 2>&1 ; then
:
else
problem="Cannot find $2 or it ($val) is not executable"
rpmsolution="Install or reinstall the '$3-devel' package"
debsolution="Install or reinstall the $3 development libraries." #FIXME
srcsolution="Get the latest release of $3 and install it."
comment="If you know that $3 is installed, try setting the
environment variable $1 to its location"
problem
fi
}
check_prefix() {
#othercfg=$1
#othername=$2
#strict=$3
eval otherpfx=\`\$$1 --prefix\`
if test x"$3" = xstrict ; then
if test x"$otherpfx" != x"$gl_prefix" ; then
problem="gnome-libs and $2 do not share the same prefix"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Re-run 'configure' in $2's source directory with the flag '--prefix=$gl_prefix'."
problem
fi
else
IFSbak="$IFS"
ok="$GNOME_PATH:$gl_prefix"
IFS=":"
passed=no
for e in $ok; do
if test x"$e" != x ; then
if test $otherpfx = $e ; then
passed=yes;
fi
fi
done
IFS="$IFSbak"
if test x"$passed" = xno ; then
problem="$2 is not in GNOME_PATH or the same prefix as gnome-libs"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Re-run 'configure' in $2's source directory with the flag '--prefix=$gl_prefix'."
comment="Try exporting an environment variable 'GNOME_PATH' with the prefix of $2."
problem
fi
fi
}
check_sysconf() {
#othercfg=$1
#othername=$2
eval othersysc=\`\$$1 --sysconfdir\`
if test x"$othersysc" != x"$gl_sysconf" ; then
problem="gnome-libs and $2 do not share the same sysconfdir"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Re-run 'configure' in $2's source directory with the flag '--sysconfdir=$gl_sysconf'."
problem
fi
}
check_oafinfo() {
#basename=$1
#othername=$2
base=$1.oafinfo
search="${oaf_prefix}/share/oaf:$OAF_INFO_PATH"
IFSback="$IFS"
IFS=":"
ok=no
for ping in $search ; do
if test x"$ping" != x ; then
if test -f $ping/$base ; then
file=$ping/$base
ok=yes
fi
fi
done
IFS="$IFSback"
if test x$ok = xno ; then
problem="$1.oafinfo isn't installed into Gnome's prefix or in OAF_INFO_PATH"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Re-run 'configure' in $2's source directory with the flag '--datadir=$gl_datadir'."
comment="Another likely cause of this problem would be a failed installation of $2.
You should check to see that the install succeeded. You may also add the
location of $1.oafinfo to the environment variable OAF_INFO_PATH"
problem
fi
iids=`cat $file |grep iid= |sed -e 's,.*iid="\([^"]*\)".*,\1,'`
IFS="
"
tempfile="temp-$$-verifier"
for iid in $iids ; do
#echo "Attempting to activate IID \"$iid\"..."
$OAF_CLIENT -qs "iid == '$iid'" >$tempfile
result=`cat $tempfile |grep exception`
if test x"$result" != x ; then
problem="The component $2 (in $file) couldn't be activated by OAF"
rpmsolution="Verify that $file is valid and that oaf and $2 are correctly installed."
debsolution="Verify that $file is valid and that oaf and $2 are correctly installed."
srcsolution="Verify that $file is valid and that oaf and $2 are correctly installed."
comment="$OAF_CLIENT reported this:
`cat $tempfile`"
rm -f $tempfile
problem
fi
done
rm -f $tempfile
IFS="$IFSback"
}
check_bin() {
#name=$1
#othername=$2
IFSbak="$IFS"
search="$PATH"
IFS=":"
passed=no
for ping in $search; do
if test -x $ping/$1 ; then
passed=yes;
fi
done
IFS="$IFSbak"
if test x"$passed" = xno ; then
problem="The binary $1 isn't in your PATH"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Re-run 'configure' in $2's source directory with the flag '--bindir=$gl_bindir'."
comment="Another likely cause of this problem would be a failed installation of $2.
You should check to see that the install succeeded."
problem
fi
}
check_no_gnorba() {
#libs=$1
#othername=$2
ping=`echo $1 |grep 'gnorba'`
if test x"$ping" != x ; then
problem="$2 was built using Gnorba, not OAF"
rpmsolution="This problem shouldn't happen with RPM installations. Verify your installation of Helix Gnome."
debsolution="This problem shouldn't happen with DEB installations. Verify your installation of Helix Gnome."
srcsolution="Update $2 and re-run 'configure' in its source directory with the flag '--enable-oaf=yes'."
problem
fi
}
########################################
versionparse3() {
#inst_version=$1
#reqd_version=$2
#package=$3
inst_version=`versiongrab3 "$1"`
inst_major=`echo $inst_version |sed -e 's,\([0-9][0-9]*\)\..*\..*,\1,'`
inst_minor=`echo $inst_version |sed -e 's,.*\.\([0-9][0-9]*\)\..*,\1,'`
inst_micro=`echo $inst_version |sed -e 's,.*\..*\.\([0-9][0-9]*\),\1,'`
reqd_version=`versiongrab3 "$2"`
reqd_major=`echo $reqd_version |sed -e 's,\([0-9][0-9]*\)\..*\..*,\1,'`
reqd_minor=`echo $reqd_version |sed -e 's,.*\.\([0-9][0-9]*\)\..*,\1,'`
reqd_micro=`echo $reqd_version |sed -e 's,.*\..*\.\([0-9][0-9]*\),\1,'`
ok=yes
if test $inst_major -lt $reqd_major ; then
ok=no
elif test $inst_major -gt $reqd_major ; then
ok=yes
elif test $inst_minor -lt $reqd_minor; then
ok=no
elif test $inst_minor -gt $reqd_minor; then
ok=yes
elif test $inst_micro -lt $reqd_micro; then
ok=no
fi
if test x$ok = xno ; then
problem="Package $3 is not new enough ($1 detected, $2 required)"
rpmsolution="Obtain a newer version and install it"
depsolution="Obtain a newer version and install it"
srcsolution="Obtain a newer version and install it"
comment="If you think you have a newer installation, make sure that the
package is not installed twice."
problem
fi
}
versiongrab3() {
echo $1 |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*,\1,'
}
check_module3() {
#$1=gnome-libs name
#$2=package
#$3=version
$GNOME_CONFIG --modversion $1 1>/dev/null 2>/dev/null </dev/null
if test x$? != x0 ; then
problem="Package $2 doesn't seem to be installed."
rpmsolution="Get and install the packages '$2' and '$2-devel'"
debsolution="Get and install the package $2 and its development libraries" #FIXME
srcsolution="Download the source and install the package $2"
comment="If you think the package is installed, check that its prefix is $gl_prefix --
${1}Conf.sh should be installed into `$GNOME_CONFIG --libdir`"
problem
fi
instversion=`$GNOME_CONFIG --modversion $1`
#eew eew hacky
# gnome-vfs used to be versioned gnome-vfs-0.1,
# and gnome-vfs-0.2, but then they moved to three figs--
# now it's gnome-vfs-0.2.0
if test $2 = gnome-vfs ; then
case "$instversion" in
gnome-vfs-0.1)
problem="Package gnome-vfs is not new enough (0.1 detected, $3 required)"
rpmsolution="Obtain a newer version and install it"
depsolution="Obtain a newer version and install it"
srcsolution="Obtain a newer version and install it"
comment="If you think you have a newer installation, make sure that the
package is not installed twice."
problem
;;
gnome-vfs-0.2)
instversion="gnome-vfs-0.2.0"
;;
*)
#nothing, version is ok
;;
esac
fi
versionparse3 "$instversion" "$3" "$2"
}
########################################
versionparse2() {
#inst_version=$1
#reqd_version=$2
#package=$3
inst_version=`versiongrab2 "$1"`
inst_major=`echo $inst_version |sed -e 's,\([0-9][0-9]*\)\..*,\1,'`
inst_minor=`echo $inst_version |sed -e 's,.*\.\([0-9][0-9]*\),\1,'`
reqd_version=`versiongrab2 "$2"`
reqd_major=`echo $reqd_version |sed -e 's,\([0-9][0-9]*\)\..*,\1,'`
reqd_minor=`echo $reqd_version |sed -e 's,.*\.\([0-9][0-9]*\),\1,'`
ok=yes
if test $inst_major -lt $reqd_major ; then
ok=no
elif test $inst_major -gt $reqd_major ; then
ok=yes
elif test $inst_minor -lt $reqd_minor; then
ok=no
fi
if test x$ok = xno ; then
problem="Package $3 is not new enough ($1 detected, $2 required)"
rpmsolution="Obtain a newer version and install it"
depsolution="Obtain a newer version and install it"
srcsolution="Obtain a newer version and install it"
comment="If you think you have a newer installation, make sure that the
package is not installed twice."
problem
fi
}
versiongrab2() {
echo $1 |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\).*,\1,'
}
check_module2() {
#$1=gnome-libs name
#$2=package
#$3=version
$GNOME_CONFIG --modversion $1 1>/dev/null 2>/dev/null </dev/null
if test x$? != x0 ; then
problem="Package $2 doesn't seem to be installed."
rpmsolution="Get and install the packages '$2' and '$2-devel'"
debsolution="Get and install the package $2 and its development libraries" #FIXME
srcsolution="Download the source and install the package $2"
comment="If you think the package is installed, check that its prefix is $gl_prefix --
${1}Conf.sh should be installed into `$GNOME_CONFIG --libdir`"
problem
fi
instversion=`$GNOME_CONFIG --modversion $1`
versionparse2 "$instversion" "$3" "$2"
}
########################################
#prep
if test -d /var/lib/rpm ; then
rpmsystem=yes
RPM=${RPM_PROG-rpm}
$RPM --version 1>/dev/null 2>/dev/null </dev/null
if test x$? != x0 ; then
problem="The rpm executable ($RPM) does not seem to work."
rpmsolution="none, if rpm doesn't work."
debsolution="not applicable."
srcsolution="download and install rpm manually."
comment="If rpm really won't work then there is something wrong with your system."
problem
fi
else
rpmsystem=no
fi
if test -d /var/lib/dpkg ; then
debsystem=yes
#FIXME: check if deb works
else
debsystem=no
fi
if test x"$GNOME_PATH" != x ; then
PATH="$GNOME_PATH:$PATH"
fi
#gnome-libs
check_config GNOME_CONFIG gnome-config gnome-libs
gl_version=`$GNOME_CONFIG --version` # |sed -e 's,.*\([0-9][0-9]*\.[0-9][0-9]*\.[0-9][0-9]*\).*,\1,'`
gl_sysconf=`$GNOME_CONFIG --sysconfdir`
gl_prefix=`$GNOME_CONFIG --prefix`
gl_datadir=`$GNOME_CONFIG --datadir`
gl_bindir=`$GNOME_CONFIG --bindir`
versionparse3 "$gl_version" "1.0.59" "gnome-libs"
#libunicode
check_config UNICODE_CONFIG unicode-config libunicode
check_prefix UNICODE_CONFIG libunicode
versionparse2 "`$UNICODE_CONFIG --version`" "0.4" libunicode
#ORBit
check_config ORBIT_CONFIG orbit-config ORBit
check_prefix ORBIT_CONFIG ORBit
#oaf
check_config OAF_CONFIG oaf-config oaf
check_prefix OAF_CONFIG oaf
versionparse3 "`$OAF_CONFIG --version`" "0.4.0" "oaf"
check_bin oafd
OAF_CLIENT=${OAF_CLIENT-oaf-client}
if type $OAF_CLIENT </dev/null >/dev/null 2>&1 ; then
:
else
problem="oaf-client couldn't be found"
rpmsolution="Install the 'oaf-devel' package"
debsolution="Install the oaf development libraries"
srcsolution="Make sure that oaf is installed correctly"
comment="If you think you have oaf-client installed, try exporting an
environment variable OAF_CLIENT pointing to it"
problem
fi
oaf_prefix=`$OAF_CONFIG --prefix`
check_oafinfo oafd oaf
#gconf
check_config GCONF_CONFIG gconf-config GConf
check_prefix GCONF_CONFIG GConf
versionparse2 "`$GCONF_CONFIG --version`" "0.5" GConf
if type gconfd-1 </dev/null >/dev/null 2>/dev/null; then
check_oafinfo gconfd-1 GConf
check_bin gconfd-1
else
check_oafinfo gconfd GConf
check_bin gconfd
fi
check_no_gnorba "`$GCONF_CONFIG --libs`" GConf
#gnome vfs
check_module3 vfs gnome-vfs "0.2.0"
check_no_gnorba "`$GNOME_CONFIG --libs vfs`" gnome-vfs
#gnome print
check_module2 print gnome-print "0.20"
check_no_gnorba "`$GNOME_CONFIG --libs print`" gnome-print
#bonobo
check_module2 bonobo bonobo "0.15"
check_prefix "GNOME_CONFIG bonobo" bonobo strict
check_oafinfo audio-ulaw bonobo
check_bin bonobo-audio-ulaw bonobo
check_no_gnorba "`$GNOME_CONFIG --libs bonobo`" bonobo
#gtkhtml
check_module2 gtkhtml GtkHTML "0.5"
check_oafinfo html-editor-control GtkHTML
check_bin html-editor-control GtkHTML
check_no_gnorba "`$GNOME_CONFIG --libs gtkhtml`" GtkHTML
#evolution
check_oafinfo addressbook evolution
check_oafinfo calendar-control evolution
check_oafinfo evolution-mail evolution
check_oafinfo evolution-calendar evolution
check_oafinfo evolution-addressbook-select-names evolution
check_oafinfo wombat evolution
check_bin evolution-mail evolution
check_bin evolution-calendar evolution
check_bin evolution-addressbook evolution
check_bin wombat evolution
check_bin evolution evolution
#done
echo "Your Gnome system appears to be properly set up. Enjoy Evolution!"
exit 0
