2000-12-07 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c (forward_message): Only do a
message_list_foreach if we plan on attaching messages, otherwise
just use ml->cursor_uid.
* mail-ops.c (cleanup_forward_messages): If attaching multiple
forwarded message, wrap them in a multipart/digest otherwise just
attach the single message as a message/rfc822.
2000-12-07 Dan Winship <danw@helixcode.com>
* mail-display.c (on_object_requested): Make the iTip hack spew a
g_warning and not crash if you have no identity configured. To be
revisited.
* mail-callbacks.c: (various)
* folder-browser.c (filter_mlist):
* mail-autofilter.c (filter_gui_add_from_message):
* mail-vfolder.c (vfolder_gui_add_from_message): Add some
g_return_if_fail()s to protect from crashes until the code to
enable/disable commands based on how many messages are selected is
done.
2000-12-06 Jeffrey Stedfast <fejj@helixcode.com>
* mail-vfolder.c (vfolder_gui_add_rule): Make the vfolder editor
resize correctly. Fixes bug #835.
2000-12-06 Dan Winship <danw@helixcode.com>
Fix up shutdown so that things that should be destroyed get
destroyed. Among other things, this fixes the bug where IMAP
stores weren't disconnected at shutdown.
* mail-threads.c (update_active_views): Update for
folder_browser_factory_get_control_list change to EList.
* folder-browser-factory.c: Turn control_list into an EList so
that we can safely remove items from it while it's being iterated
(which will happen as FolderBrowsers are destroyed at shutdown
while the thread code is trying to update the status bars).
(control_destroy_cb): Just destroy the folder_browser.
(browser_destroy_cb): New callback for FolderBrowser destroy.
Remove the control from control_list here instead of
control_destroy_cb, because the controls don't seem to get
destroyed reliably...
* component-factory.c: Clean up stuff.
(factory_destroy): Get rid of this.
(owner_unset_cb): Schedule an idle handler to quit.
(idle_quit): Wait for all of the FolderBrowsers to be destroyed
and then destroy the storages and quit.
* mail-summary.h (create_summary_view): Fix prototype
2000-12-06 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c (mail_config_folder_to_cachename): Use
e_filename_make_safe (which used to be e_str_make_safe).
* mail-display.c (make_safe_filename): And here.
* message-list.c (message_list_drag_data_get): Here too.
2000-12-06 Dan Winship <danw@helixcode.com>
* mail-local.c (cleanup_register_folder): Run the folder_changed
code on message_changed as well, so the unread message counts
update as messages are read.
* folder-browser.c: Remove bits of filter-on-demand and toolbar
bug workaround cruft that don't do anything useful any more.
* mail-ops.c (cleanup_load_folder): unref the ref we added in
setup_load_folder.
2000-12-05 Jeffrey Stedfast <fejj@helixcode.com>
* mail-display.c (write_data_to_file): Use a charset filter to
make sure the data is written out in the charset it was meant to
be in instead of UTF-8.
* mail-format.c (mail_format_raw_message): Don't use the raw
message body as the format argument, use "%s" instead. If the raw
message contains %'s then it will segfault otherwise.
2000-12-04 Dan Winship <danw@helixcode.com>
* mail-config-gui.c (service_page_item_new): Fix a typo so that
toggling the "remember password" checkbox will activate the "OK"
button if it was inactive.
2000-12-05 Ettore Perazzoli <ettore@helixcode.com>
* mail-vfolder.c (vfolder_create_storage): Updated the call to
`evolution_storage_new()': pass NULL for @toplevel_node_uri.
* component-factory.c (add_storage): Updated the call to
`evolution_storage_new()': pass NULL for @toplevel_node_uri.
2000-12-04 Jeffrey Stedfast <fejj@helixcode.com>
* subscribe-dialog.c (setup_subscribe_folder): Use info->full_name
rather than info->name so that we get the namespace part of the
folder path as well.
2000-12-04 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser-factory.c: Updated to define verbs
"MessageForwardInlined" and "MessageForwardAttached" instead of
"MessageForwardInline" and "MessageForwardAttach".
* folder-browser.c (on_right_click): Make forwarding as an
attachment the default.
* mail-callbacks.c (forward_inlined): Renamed from `forward_msg'.
(forward_attached): Renamed from `forward_attach'.
* mail-callbacks.h: Updated accordingly.
2000-12-01 Dan Winship <danw@helixcode.com>
* session.c (mail_session_remember_password): Writes out passwords
(to .gnome_private) in our patented proprietary "Best Awesome
Super Encryption 64" ("BASE64") format which could not possibly
ever be cracked by even the most cryptographically knowledgeable
five-year-olds.
(mail_session_init): Load remembered passwords at startup.
(mail_session_forget_passwords): Erase them from disk as well as
memory.
* mail-config.c: Add "remember_password" field to
MailConfigService.
(mail_config_write_on_exit): Call mail_session_remember_password
for services with "remember_password" set.
* mail-config-gui.c: Add "remember password" checkbox to the
dialogs, and make it appear and disappear as appropriate.
* component-factory.c (mail_load_storages): Unref the store
regardless of whether or not we're using it, so we don't leak
references to non-storage stores.
2000-12-01 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (e_mail_address_new): Perform better
error-handling.
2000-12-01 Radek Doulik <rodo@helixcode.com>
* mail-ops.c (mail_op_report_status): use mail_op_set_message_plain
* mail-threads.c (mail_op_set_message_plain): plain version of
mail_op_set_message, doesn't use printf, passes message untouched,
use set_message
(mail_op_set_message): set_message
(set_message): helper function
2000-11-30 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (cleanup_fetch_mail): Don't display a dialog, instead
inform the user that there was no new mail by setting a status
message.
* message-list.c (message_list_drag_data_get): Use the new
e_str_make_safe function.
* mail-display.c (make_safe_filename): And here.
* mail-config.c (mail_config_folder_to_cachename): Here too.
2000-11-30 Not Zed <NotZed@HelixCode.com>
* mail-ops.c (cleanup_load_folder): Set threaded view before
setting the folder (cleanup some flash ons tartup).
* message-list.c (message_list_init): Initialise a mempool for uid
string storage.
(new_id_from_uid): Added messagelist arg, allocate strings from
uid_pool.
(new_id_from_subject): Same. Fixed all callers.
(remove_node_diff): Dont free uid here.
(build_flat_diff): Nor here.
(clear_tree): Flush the mempool, rather than freeing the id's
directly.
(free_tree_ids): Removed, no longer required.
(free_tree_ids): Likewise.
(message_list_init): Dont connect to the table destroy signal
anymore to free the uid table.
(message_list_destroy): Free the uid pool here.
(*): Use accessors for messageid stuff.
(content_is_attachment): Removed, no longer required.
(ml_tree_value_at): Get the attachment flag directly from the
summary.
(ml_tree_value_at): For 'fake' nodes, try and do something better
than "?" for from, to, and size.
(subtree_size): New function, add up the total size of a subtree.
(subtree_earliest): Get the earliest date from a subtree.
(ml_tree_value_at): Return earliest date sent/received for fake
nodes.
(ml_tree_value_at): Return something to mark a fake subject line
as a fake subject, although i dont know, i guess this buggers up
sorting ...
(subtree_size): Check the info node is still there.
(subtree_earliest): Same here.
(subtree_unread): And here. The info node might vanish if the
folder has changed/is changing and we try and redraw stuff while
its doing it.
(message_list_drag_data_get): Use accessors.
2000-11-29 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (message_list_drag_data_get): Implement.
(message_list_init): Connect the d&d signal.
* mail-ops.c (do_save_messages): Use camel a bit more to help us
out. Don't create the file ourselves, treat it as a CamelFolder so
we don't have to worry about formatting.
2000-11-29 Dan Winship <danw@helixcode.com>
* main.c (main): Remove no-longer-needed e_unicode_init.
* mail-tools.c (mail_tool_quote_message): Fix the allocation here
(again) and put a comment explaining it. (Fixes a crash when
replying.)
2000-11-28 Dan Winship <danw@helixcode.com>
* component-factory.c (owner_set_cb): Wait until after setting up
the local storage to find the Drafts/Outbox/Sent folders.
* mail-ops.c (do_setup_folder): Use the file: store rather than
mbox:.
2000-11-28 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c: Added the SaveAs bonobo menu verb
thingy.
* mail-callbacks.c (save_msg): New callback for saving messages.
(save_msg_ok):
* folder-browser.c (on_right_click): Add a Save Ass menu item.
* mail-ops.c (cleanup_save_messages): Save all emails to the path
given.
2000-11-28 Dan Winship <danw@helixcode.com>
* mail-local.c (cleanup_register_folder): Fix the initial unread
counts after the last patch.
2000-11-27 Dan Winship <danw@helixcode.com>
* mail-local.c (local_folder_changed): This needs to run from the
main thread, not the camel thread, so add a proxy signal handler
to call mail_op_forward_event. Fixes hangs (eg bugzilla #909).
2000-11-27 Jeffrey Stedfast <fejj@helixcode.com>
* mail-display.c: Removed some unecessary debugging printf's
2000-11-27 Dan Winship <danw@helixcode.com>
* mail-config-druid.glade: Revert the new druid for now, until the
corresponding code is done, so that the druid will work again.
2000-11-21 Iain Holmes <iain@helixcode.com>
* mail-config-gui.c (mail_config): Don't use the "delete-event"
signal.
2000-11-21 Iain Holmes <iain@helixcode.com>
* mail-display.c (pixbuf_for_mime_type): free fm_icon.
* component-factory (summary_fn): Remove the configure param.
(factory_destroy): Made into a generic function so that the
summary_factory can be ref-counted as well as the normal
factory.
2000-11-21 Dan Winship <danw@helixcode.com>
* Makefile.am: add GPGME_CFLAGS and GPGME_LIBS
2000-11-21 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c (mail_config_view_source): New function to return
if user wants to view message source.
(mail_config_set_view_source): New function to set whether the
view wants to view source.
* mail-ops.c (mail_do_view_message_sources): Removed. We're not
gonna view-source this way anymore.
* folder-browser-factory.c: Removed the ViewSource bonobo verb
from the Message menu.
(control_activate): Added ViewSource.
* folder-browser.c (on_right_click): Removed Message menu item to
view message source.
(folder_browser_toggle_view_source): New callback to set whether
or not the MailDisplay shows the raw message or the pretty-ified
message.
* mail-callbacks.c: Removed view_source.
* mail-display.c (redisplay): If toggle_raw is set then display
the raw message else display the pretty formatted message.
(mail_display_redisplay): New function to force the redisplay of a
message.
* mail-format.c (mail_format_raw_message): New function to
write the raw message data.
2000-11-21 Not Zed <NotZed@HelixCode.com>
* mail-vfolder.c (vfolder_uri_to_folder): IF we dont find a
source, clear the exception and ignore it silently. for e.g. if
the user reconfigured their mailboxes and one of them no longer
exists.
2000-11-21 Radek Doulik <rodo@helixcode.com>
* mail-display.c: #include <gtkhtml/gtkhtml-embedded.h>
2000-11-21 Not Zed <NotZed@HelixCode.com>
* message-thread.[ch]: Removed. No longer serves a purpose.
* Makefile.am (evolution_mail_SOURCES): Removed message-thread.[ch].
* message-list.c (build_subtree):
(node_equal):
(add_node_diff):
(build_subtree_diff):
(do_regenerate_messagelist):
(cleanup_regenerate_messagelist): Changed to use camel-folder-thread.
(message_list_set_folder): If we get set a new folder, unhook any
events before unrefing the folder too (the folder is never reset
currently, but this would cause problems).
(subtree_unread): Check for uid null, wont crash, but its a bug.
(ml_tree_value_at): If the uid is null, then fake an obviously bad
line.
(build_subtree): Yeah well, we can't like freeze/thaw here,
because this is called recursive, and freeze/thaw isn't
recursive, like pre model and post model change was.
(build_tree): Maybe we can try it here, although i dont think
it'll help much.
(build_flat): And this is also a tree. yes a tree.
(build_tree): Added changes arg. If set, then try the 'diff'
approach, unless the tree is already empty.
(message_list_set_threaded): Dont clear the tree here.
(message_list_set_search): Or here.
2000-11-20 Not Zed <NotZed@HelixCode.com>
* message-list.c (save_node_state): Save out the md5 hash of the
messageid as hex, since thats all we have for those nodes.
(build_subtree): Expand the messageid to a hex string first, then
check it.
(add_node_diff): And the same here.
* message-thread.c (thread_messages): Changed for changes to
messageid/references items.
(id_hash, id_equal): New functions to hash on the binary message id hash.
(thread_messages): removed some more no longer used dead code.
2000-11-20 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (e_mail_address_compare): New comparison function
that will replace address_compare if/when we ever go to save the
preparsed addresses in the ETable rather than parsing them each
time. Also fixed it so that we should get better sorting when
addresses don't contain name parts (I was checking for NULL but
not '\0').
(address_compare): Use e_mail_address_compare.
2000-11-19 Peter Williams <peterw@helixcode.com>
* mail-ops.c (update_changed_folders): Instead of making the CORBA
call in the dispatch thread, store the new display names and have
cleanup_fetch_mail make the CORBA calls. Fixes deadlocks.
(cleanup_fech_mail): Loop through the update_infos and make the
CORBA calls.
(setup_fetch_mail): Clear some new data items.
2000-11-17 Jeffrey Stedfast <fejj@helixcode.com>
* mail-format.c (mail_generate_reply): Use the new quote_message
function and make it start with "On %s, %s wrote:" since people
seem to want that.
* mail-ops.c (cleanup_forward_messages): Use the new quote_message
function.
* mail-tools.c (mail_tool_quote_message): New convenience function
to quote a message body (since both the reply and forward code do
similar quoting)
2000-11-17 Not Zed <NotZed@HelixCode.com>
* message-list.c (message_list_destroy): Before we destroy
ourselves, unhook ourselves from the folder update events. Should
fix a common crash on exit case.
2000-11-16 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c: Added the MessageViewSource bonobo
menu verb.
* mail-ops.c (mail_do_save_messages): New async function to save
messages as individual files in a given path.
2000-11-15 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c: Added a new Forward as Attachment
bonobo menu item verb.
* mail-view.c (view_forward_msg): Updated to reflect changes to
mail_do_forward_message(). It now forwards the message without
attaching it - is this what we want?
* mail-ops.c (mail_do_view_message_sources): New async function to
display message source dialog windows.
(setup_forward_messages): If we were asked not to forward the
message(s) as attachment(s) and the user chose more than a single
message, then default to making each message an attachment.
(cleanup_forward_messages): If we aren't forwarding the message as
an attachment, then quote the text and set the composer's body
with it.
* mail-callbacks.c (view_source): New callback to view the message
source of all messages that are currently selected.
(forward_attach): New callback to forward a message as an
attachment (forward_msg is now for forwarding a message without it
being an attachment).
(forward_message): Convenience function for forwarding messages.
2000-11-13 Jeffrey Stedfast <fejj@helixcode.com>
* subscribe-dialog.c (subscribe_do_subscribe_folder): Take a
'subscribe' argument so that this can function as a subscribe AND
unsibscribe method.
(describe_subscribe_folder): Updated.
(do_subscribe_folder): Updated.
(cleanup_subscribe_folder): Updated.
(subscribe_folder_info): Pass along a TRUE as the 'subscribe'
param.
(unsubscribe_folder_info): Pass along a FALSE as the 'subscribe'
param.
2000-11-13 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Removed some e_table_model calls and replaced
them with e_tree_model calls.
2000-11-12 Dan Winship <danw@helixcode.com>
* mail-local.c (mail_do_register_folder): Do this the normal way
rather than calling mail_operation_wait_for_finish. There was some
reason for it originally, but it no longer applies. This makes
adding new folders from the folder selection dialog no longer
hang.
2000-11-12 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_filter_ondemand): Sync the source folder.
2000-11-11 Matt Bissiri <bissiri@eecs.umich.edu>
* evolution-mail.oafinfo:
* mail-threads.c: (retrieve_shell_view_interface_from_control):
Update the remaining "IDL:Evolution*" to "IDL:GNOME/Evolution*"
to sync up with yesterday's IDL re-scoping.
2000-11-10 Michael Meeks <michael@helixcode.com>
* Makefile.am ($(EVOLUTION_MAIL_CORBA_GENERATED)): sort include order.
2000-11-09 Jeffrey Stedfast <fejj@helixcode.com>
* subscribe-dialog.glade[.h]: New glade file for possibly using to
create the subscribe dialog.
2000-11-08 Radek Doulik <rodo@helixcode.com>
* mail-format.c (mail_generate_reply): likewise
* mail-callbacks.c (create_msg_composer): added send_html arg to
e_msg_composer_new_with_sig_file call
2000-11-07 Jeffrey Stedfast <fejj@helixcode.com>
* mail-search-dialogue.c (mail_search_dialogue_construct): Allow
rule part to expand when the user resizes the dialog.
2000-11-07 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c (search_save): Don't handle custom searching
anymore... we don't want this.
(search_full): Same.
(folder_browser_search_menu_activated): Set the search entry
widget sensitive.
(folder_browser_search_query_changed): Same.
2000-11-07 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c (search_full_clicked): Updated to use the
ESearchBar object rather than the previously used search widgets.
(search_full): Same.
(search_save): Same. Also use enums to make it a little easier to
read now that we have to have enums anyway.
(folder_browser_search_menu_activated): New ESearchBar menu
callback.
(folder_browser_search_query_changed): New ESearchBar query
callback. Replaces search_set()
(folder_browser_clear_search): Updated to use the ESearchBar
object rather than the previously used search widgets.
(folder_browser_gui_init): Don't hand construct a search widget,
use the new ESearchBar convenience widget.
* mail-ops.c (cleanup_load_folder): Updated to reflect changes to
FolderBrowser.
2000-11-07 Jesse Pavel <jpavel@helixcode.com>
* mail-display.c (pixmap_press): modified some of the EPopupMenu
structures to account for differences in the popup menu API (as
informed by Jeff.
(on_object_requested): passed the user's default email address
to the iTip control.
2000-11-07 Ettore Perazzoli <ettore@helixcode.com>
* Makefile.am (INCLUDES): Add the composer dirs.
2000-11-07 Not Zed <NotZed@HelixCode.com>
* mail-display.c (on_object_requested): God, I sure wish people
would listen when i'm saying i'm changing and API. I mean
I even mailed everyone and everything. Can't see any changelog
either.
2000-11-06 Not Zed <NotZed@HelixCode.com>
* mail-autofilter.c (rule_from_message): Updates for api changes.
* mail-tools.c (mail_tool_generate_forward_subject): Fixed for api
changes. Sigh, whoever wrote the multithread code of the mailer,
had little idea. You can't just lock for getting a const value,
until you are finished with it, cause the owner still owns it.
Fixed this too. Yuck, what a horrid forwarding format, can we
change this, or make it configurable? The mail headers show who
forwarded it, we dont need to duplicate it in that UGLY subject.
* mail-format.c (write_field_to_stream): Removed some jeffness.
dont g_strdup stuff we dont need to, and remove the
value_is_encoded thing since we can get the unencoded address
now.
(write_address): New function to write an address field.
(write_headers): Uses write_address to write addresses, cleaner,
fixed the god-awful unreadable indenting too.
(handle_text_plain): Use a 'smarter' printf format, so we dont
need to allocate and copy substrings unecessarily (esp since
they're about to be allocated any copied another few times
anyway *sigh*).
(write_field_to_stream): Commented out the isprint check, which
afaik serves no purpose.
(list_add_addresses): New function to build a list of
display-ready addresses. Although I think the composer then uses
these as internet-ready addresses. It should probably take a list
of CamelAddress's if thats what it wants.
(mail_generate_reply): Cleaned up the address list creation stuff
a heap, and fixes for camel api changes. Also fixed a small
memory leak as a side effect (fulladdr wasn't freed if it was the
same as the sender).
* mail-display.c (on_object_requested): Changed for interface
changes to the from address. I think passing the encoded
(internet version) of the address is right here.
2000-11-06 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c (on_right_click): Move filter stuff into a
submenu of the popup menu.
2000-11-06 Jesse Pavel <jpavel@helixcode.com>
* mail-display.c: used Camel to parse the full address before
passing the email address to my iTip control.
2000-11-06 Dan Winship <danw@helixcode.com>
First draft of folder tree unread message indication for /local
mail folders.
* mail-local.c: Add a new CamelStore subclass, MailLocalStore,
which attaches to an Evolution_LocalStorage on one side and
CamelSession on the other, and keeps track of local folders. Some
of this code was previously in mail-local-storage.c, which no
longer exists.
(local_reconfigure_folder, etc): Various mail_op-related cleanups,
and wrap d() around a bunch of printfs.
* mail-tools.c (mail_tool_get_local_inbox_url,
mail_tool_get_local_movemail_url): Removed
(mail_tool_get_local_inbox): Simplified.
(mail_tool_do_movemail): Remove unused dest_url variable.
(mail_tool_uri_to_folder): Simplify. Now down to two cases
(vfolder, and everything else).
* component-factory.c (owner_set_cb): Pass evolution_dir to
mail_local_storage_startup.
* Makefile.am (evolution_mail_SOURCES): Remove
mail-local-storage.[ch]
* mail-summary.c: Remove mail-local-storage.h include
2000-11-06 Kjartan Maraas <kmaraas@gnome.org>
* mail-autofilter.c: Fix up #include <config.h>
* mail-crypto.c: Same here.
* mail-search-dialog.c: Here too.
* main.c: Fix indentation of #ifdef
* message-thread.c: Fix include.
2000-11-06 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c (delete_msg): Don't invert the flag.
(undelete_msg): Same (when multiple messages are selected).
2000-11-06 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c: Updated to have the same menu items as
the new right-click menu - eventually these 2 menus should be the
same.
* folder-browser.c (on_right_click): Now correctly handles the
case of multiple selection.
* mail-callbacks.c (enumerate_msg): Make public so it can be used
in other source files (it's a useful function!)
2000-11-05 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c (on_right_click): Added an "Undelete" option to
the right-click menu and also set a mask so it was only selectable
if the message is marked as deleted. Also set a mask for "Mark as
Read" and "Mark as Unread".
* mail-callbacks.c (undelete_msg): New callback to undelete
messages.
2000-11-03 Dan Winship <danw@helixcode.com>
* message-list.c (cleanup_regenerate_messagelist): don't free the
MessageList search when it's being reused
2000-11-03 Jeffrey Stedfast <fejj@helixcode.com>
* mail-local.c (mail_local_map_uri): Don't show the passwd in the
url string.
(mail_tool_local_uri_to_folder): Same.
(do_reconfigure_folder): Same.
2000-11-03 Jeffrey Stedfast <fejj@helixcode.com>
* Makefile.am: Added new header files.
* component-factory.c (owner_set_cb):
s/session_init/mail_session_init
* session.c: Renamed public functions to mail_session_*.
FIXME: Rename session.c to mail-session.c
* folder-browser-factory.c: #include "mail-callbacks.h", #include
"mail-session.h" and replace forget_passwords with
mail_session_forget_passwords
* mail.h: Move session prototypes to mail-session.h, Move
mail-crypto prototypes to mail-crypto.h, Move mail-callback
prototypes to mail-callbacks.h
* mail-session.h: New header file containing public prototypes
for session.c
* mail-format.c: #include "mail-crypto.h"
* mail-view.c:
* folder-browser.c: #include "mail-callbacks.h"
* mail-crypto.h: New header file containing public prototypes
for mail-crypto.c
* mail-callbacks.h: New header file containing public prototypes
for mail-callbacks.c
* message-list.c (message_list_get_layout): Set useful defaults.
(message_list_setup_etable): Don't set the Outbox defaults on a
folder just because it doesn't have a corresponding saved file.
2000-11-03 Dan Winship <danw@helixcode.com>
* mail-config-gui.c (service_page_item_new): url_flags are now on
CamelProvider, not CamelService
* main.c:
* subscribe-dialog.c:
* mail-threads.c: Kill warnings
2000-11-03 Federico Mena Quintero <federico@helixcode.com>
* Makefile.am: Clean the idl-generated files properly.
2000-11-03 Not Zed <NotZed@HelixCode.com>
* mail-view.c: Added mail-display.h.
* mail-autofilter.c: Removed unecessary headers. Who ran indent
over this code? Sigh.
* mail-ops.c (display_message_input_s): Added messagedisplay.
(mail_do_display_message): Added messagedisplay arg.
(mail_do_display_message): Dont bother doing another thread when
we know we dont have a uid.
(): Added folder-browser.h to headers. Sigh.
* folder-browser-factory.c (control_activate): Setup the
viewthreaded callback to the folder_browser function.
* folder-browser.c (my_folder_browser_init): Connect to
right_click of etable of the messagelist here.
(on_right_click): Changed for argument changes.
(folder_browser_toggle_threads): Changed to take a fb, and to set
threaded mode on the messagelist.
(my_folder_browser_init): Connect also to the double_click signal.
(my_folder_browser_init): Connect to the message_selected signal
of the message_list.
(on_message_selected): Signal handler for message selected.
(my_folder_browser_init): Fix for change to message_list_new().
* message-list.h: Dont include folder-browser.h.
(message_list_toggle_threads): Moved into folder-browser.h.
(struct _MessageList): Removed folderbrowser.
* mail.h: Dont include folder-browser.h here either, but
mail-types.h instead.
Moved prototypes moved into folder-browser.c into
folder-browser.h. (vfolder_*, filter_*).
* mail-display.h: Dont include folder-browser.h here, but
mail-types.h and specific camel headers.
* message-thread.c (sort_node): Invert the sort order logic so the
list is sorted in mailbox order, not reverse mailbox order.
* message-list.c (free_tree_ids): Fix a merge foo.
(remove_node_diff): Removed unused row argument. Fixed
callers/prototype.
(clear_tree): pre_change on the removal of the root node.
(build_flat): Only perform pre_change if we are rebuilding the
whole lot. For incremental change let etable do its thing.
(build_tree): Likewise for building the tree view. If making
incremental updates, do them as we build it.
(vfolder_subject):
(vfolder_sender):
(vfolder_recipient):
(filter_subject):
(filter_sender):
(filter_recipient):
(filter_mlist):
(on_right_click): Moved to folder-browser.c, where they belong.
(message_list_init): Dont connect to right_click anymore.
(message_list_toggle_threads): Moved to folder-browser.c, renamed.
(on_double_click): Moved to folder-browser.c
(on_click): Set the flags directly, rather than in anothre thread,
which is just not necessary.
(message_list_class_init): Added a new signal 'message_selected',
to indicate when a message was selected.
(on_cursor_change_idle): Emit a signal, rather than directly
triggering the display update.
(select_row): Removed, no longer used.
(idle_select_row): And this too.
(select_msg): Removed as well.
(message_list_select): Emit a signal, rather
thandisplaying/clearing the mail-display directly.
(mark_msg_seen): Moved to folder-browser.c
(message_list_new): Removed folderbrowser argument.
2000-11-02 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (on_right_click): Sync with message
menu. Addresses bugzilla bug #778.
2000-11-02 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Turn on draw grid for the main ETable (this may
not be working in ETable itself.)
2000-11-01 Jeffrey Stedfast <fejj@helixcode.com>
* mail-threads.c (mail_op_set_message): fmt argument should be
const.
2000-11-01 Dan Winship <danw@helixcode.com>
Make "Get Mail" even more functional on IMAP (scans all folders),
and do a first cut at folder tree highlighting (for IMAP/news
only).
* mail-ops.c (do_fetch_mail): For imap (sigh, we *still* shouldn't
be hardcoding that), rescan the store's folder tree, rescan each
changed folder for new messages, and update the shell folder tree.
(do_scan_subfolders): Update for component-factory.c changes, and
set folder display names and highlights appropriately when
building the storage.
* component-factory.c (add_storage): Make this static (was
mail_add_new_storage). Use camel_service_get_name for the name
rather than url->host. (Among other things, this lets you use a
single machine as both an IMAP server and a news server.)
(mail_lookup_storage): Hash storages based on their CamelStore
rather than the URL.
(factory_destroy): Disconnect each of the CamelStores in the
storages_hash.
* subscribe-dialog.c (cleanup_subscribe_folder):
* mail-vfolder.c (vfolder_refresh): Pass "highlighted" flag to
evolution_storage_new_folder
2000-11-01 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (mail_op_report_status): Don't call the default
logging function.
(do_fetch_mail): Set the logfile and don't pass the logfile to
filter_driver_set_status_func - it's purpose has been altered.
(do_filter_ondemand): Same.
2000-11-02 Not Zed <NotZed@HelixCode.com>
** Merged in camel-incremental-branch.
* mail-format.c (mail_get_message_body): Jeff! Sigh.
We should definetly not be strduping the
content, it has already been copied and duplicated. Look at
get_data_wrapper_text.
2000-11-01 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.h: add fields search_entry and search_top.
* subscribe-dialog.c: add mail-ops.c style async operations for
getting the store (to remove deadlock in the case where a auth
dialog is dismissed at startup and then the subscribe dialog is
brought up), and subscribing/unsubscribing to folders. One case
remains, that is getting the list of all folders.
(subscribe_search): flesh out this function
(build_tree): use the search_top field so we can search for
groups/folders.
(subscribe_dialog_destroy): free search_top.
(subscribe_dialog_construct): init search_top.
2000-10-30 Iain Holmes <iain@helixcode.com>
* mail-summary.c (generate_folder_summaries): Fix spelling :)
Set folder->uri to NULL for the Inbox.
2000-10-26 Iain Holmes <iain@helixcode.com>
* mail-summary.c (generate_html_summary): Add view:// uris to
switch the display to that folder.
2000-11-01 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c: Hmmm, someone can't spell Filder,
er...I mean Filter ;-)
2000-11-01 Jeffrey Stedfast <fejj@helixcode.com>
* mail-autofilter.c (rule_from_message): If the name is NULL or
empty, then set the title to "Mail from <address>". Closes
bugzilla bug #777. Also when filtering on Subject, set the file
name to "Subject is <subject>" rather than just "<subject>" - I
think this is a bit more user-friendly.
(strip_re): Use unsigned char when passing to is<type>()
functions from ctype.h.
(rule_add_subject): Use the "is" rule instead of "contains".
2000-11-01 Jesse Pavel <jpavel@helixcode.com>
* mail-display.c: added property bag support for Bonobo
controls, support which helps only the iTip control, currently.
2000-11-01 Dan Winship <danw@helixcode.com>
* mail-display.c (pixbuf_gen_idle): Lots of fixes and
simplifications. Should get rid of the "missing icon" problem.
There is still a problem with some images failing to get
thumbnails, even though they display correctly.
(pixbuf_for_mime_type): New function to try really hard to get the
right icon for a MIME type, including looking in mc and nautilus's
pixmap directories.
(on_object_requested): Always use pixbuf_gen_idle, even for
non-image types, to prevent code duplication.
2000-10-31 Jeffrey Stedfast <fejj@helixcode.com>
* mail-format.c (mail_get_message_body): Shouldn't we be
strdup'ing the content? This seems to fix the memory corruption
problems.
(mail_generate_reply): Make sure that the last char in the
generated reply text is '\0' (when body text doesn't end with a
\n, a random char will appear otherwise).
2000-10-31 Dan Winship <danw@helixcode.com>
* mail-config-gui.c (do_test_service): Update for
camel_service_disconnect change.
2000-10-31 Jeffrey Stedfast <fejj@helixcode.com>
* mail-autofilter.c (filter_gui_add_for_mailing_list): Match "is"
rather than "contains" now that we have the "is"-rule.
2000-10-30 Dan Winship <danw@helixcode.com>
* mail-config-gui.c (config_do_query_authtypes): Redo this so that
it works for all pages, not just the first page. (Now that this is
finally working again, I expect Anna to finish her redesign in the
next 15 minutes.)
(service_page_item_new): Fix up the sizing of the Auth line to
look more like everything else.
2000-10-29 Dan Winship <danw@helixcode.com>
* mail-tools.c (mail_tool_uri_to_folder): Simplify this a lot by
making IMAP and NNTP use the same code, now that the IMAP
namespace doesn't need special magic handling.
* message-list.c (mail_do_regenerate_messagelist): Don't try to
regenerate the message list if there is no folder. (The Bonobo UI
code will call this as the callback for the "Threaded View"
command.)
* mail-ops.c (do_fetch_mail): Sync the folder before refreshing so
we don't lose flag settings.
2000-10-27 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c (composer_send_cb): Check to make sure that the
recipient list is neither NULL nor a 0-length list of addresses
and pop up a dialog letting the user know why we are not allowing
him/her to send the message.
2000-10-26 Dan Winship <danw@helixcode.com>
* mail-display.c (write_data_to_file): Don't destroy a dialog
after run_and_close'ing it.
2000-10-26 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c (composer_send_cb): Check for the TO recipient
list being NULL and don't send.
2000-10-25 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_send_mail): Don't forget to unref the
FilterDriver.
* mail-callbacks.c (apply_filters): New callback for applying
on-demand filters. (removed the old on-demand filters callback).
* mail-ops.c (do_filter_ondemand): Rewrote to apply "incoming"
filters to all selected messages.
(mail_do_filter_ondemand): No longer takes a FilterContext
argument or a destination folder argument (why did we ever need
this last one??) but now takes a uids argument.
* folder-browser-factory.c: Add a MessageApplyFilters menu item.
2000-10-25 Iain Holmes <iain@helixcode.com>
* mail-summary.[ch]: Updated for the new ExecutiveSummary code.
* Makefile.am: Added the summary files and the evolution-services CFLAGS
and LIB stuff.
* component-factory.c: Re-enabled the summary stuff.
2000-10-25 Dan Winship <danw@helixcode.com>
* main.c (main): Pass send/postpone signal handler functions to
evolution_composer_factory_init.
2000-10-25 Jeffrey Stedfast <fejj@helixcode.com>
* subscribe-dialog.c (subscribe_select_all): Implemented.
(subscribe_invert_selection): (was unselect_all) Implemented.
2000-10-25 Dan Winship <danw@helixcode.com>
* message-list.c: Add a "flagged" column, based on the Camel
"flagged" flag, for assigning an arbitrary "hey, I care about
this" flag to a message.
(ml_tree_set_value_at): Remove
(ml_tree_is_cell_editable): No, it's not.
(on_click): Handle the read/unread and flagged fields via the
click handler. Among other things, this makes it not select
a message when you change its read status.
2000-10-24 Dan Winship <danw@helixcode.com>
* subscribe-dialog.c (folder_info_subscribed,
subscribe_folder_info, unsubscribe_folder_info): Don't prepend "/"
to the folder's full_name. Deal with hierarchy in the
EvolutionStorage tree better.
(storage_tree_path): Helper function to build a storage path from
a CamelFolderInfo.
2000-10-23 Dan Winship <danw@helixcode.com>
* *: Add some missing _()s and N_()s.
2000-10-23 Dan Winship <danw@helixcode.com>
* Makefile.am (INCLUDES): Update EVOLUTION_LOCALEDIR.
2000-10-23 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_send_mail): Apply outgoing filters to the
message.
2000-10-23 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Fixed a possible error in row numberings. This
needs to be changed quite a bit anyway, but this should make
things slightly nicer in some cases.
2000-10-23 Christopher James Lahey <clahey@helixcode.com>
* folder-browser.c: Made the top of the folder browser a little
prettier.
* mail-display.c, mail-vfolder.c: Made more dialogs resizable.
2000-10-23 Jeffrey Stedfast <fejj@helixcode.com>
* mail-autofilter.c (filter_gui_add_from_message): Don't forget to
set the rule source! (eg "incoming", "demand", or "outgoing")
2000-10-22 Ettore Perazzoli <ettore@helixcode.com>
* message-list.c (message_list_init): Always display the vertical
scrollbar.
* mail-display.c (mail_display_new): Always display the vertical
scrollbar.
2000-10-20 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.h: #include <camel/camel-folder.h>
2000-10-20 Michael Meeks <michael@helixcode.com>
* mail.h: s/BonoboUIHandler/BonoboUIComponent/
* mail-callbacks.c (run_filter_ondemand): ditto.
* session.c (forget_passwords): ditto.
2000-10-20 Dan Winship <danw@helixcode.com>
* evolution-mail.oafinfo: Declare composer factory.
* main.c (main): Initialize it
2000-10-19 Chris Toshok <toshok@helixcode.com>
* message-list.c (nuke_uids): e-tree-model is now opaque. use the
accessor to get the root node.
2000-10-19 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c: #include "mail-vfolder.h"
(vfolder_edit_vfolders): Don't call the dummy vfolder_edit
function.
* folder-browser-factory.c: s/VFolderEdit/SetVFolder
2000-10-19 Dan Winship <danw@helixcode.com>
* mail-ops.c: (do_fetch_mail): For an imap store, just refresh the
INBOX.
* folder-browser-factory.c (control_deactivate): Don't sync
non-existent folders.
* message-list.c (nuke_uids): Don't traverse non-existent trees.
2000-10-19 Ettore Perazzoli <ettore@helixcode.com>
* Makefile.am (glade_messages): New.
(EXTRA_DIST): Add `$(glade_messages)'.
2000-10-19 Dan Winship <danw@helixcode.com>
* mail-ops.c: Clean up some old #if 0 code.
2000-10-19 Jeffrey Stedfast <fejj@helixcode.com>
* mail-format.c (mail_generate_reply): Get the MailConfigIdentity
*before* we create a new composer object so that we can set the
signature file.
2000-10-18 Michael Meeks <michael@helixcode.com>
* folder-browser-factory.c (register_ondemand): kill.
(create_ondemand_hooks): die.
(control_activate): remove hook.
* test-mail.c (create_container): kill old UI handler.
2000-10-18 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Fixed some column widths.
2000-11-02 Not Zed <NotZed@HelixCode.com>
* message-list.c (get_message_info): Call get_message_uid to get
the uid, save some duplicated code.
(folder_changed): Handle the case of a NULL changes input.
* message-thread.c (thread_messages): Removed pointless
variable/assignment 'container'.
(thread_messages): Try and cope with duplicate message id's.
2000-11-01 Not Zed <NotZed@HelixCode.com>
* mail-callbacks.c (main_select_first_unread): Changed to use 0 as
the first row to select a message.
* mail-ops.h (mail_do_regenerate_messagelist): Removed from
header. This function is no longer public since it is really an
internal message-list function.
* folder-browser.c (search_full_clicked): Call the set_search()
function, rather than messagelist_rebuild, which is going private.
(search_set): Same here.
(folder_browser_clear_search): And here.
(etable_key): Call message_list_select() instead of
message_list_home and message_list_end. Removing some odd code
duplication.
* message-thread.c (do_thread_messages): Moved the mail lock to
here, rather than locking for each message lookup (which is
useless anyway). This is still not correct either, as the tree
references folder data ... but a bit better than it was.
(thread_messages): Removed the mail tool lock stuff, lock in
higher functions.
* message-list.h: Added a threaded indicator to the message list
itself.
(threaded_view): removed a mystery variable.
* message-list.c (do_regenerate_messagelist): Made the code a
little more readable.
(build_tree): Fixed argument to be a thread_messages struct, not a
container.
(cleanup_regenerate_messagelist): Free changeinfo.
(mail_do_regenerate_messagelist): If we are adding changes to a
flat view, we dont need to goto the other thread at all, so
process immediately.
(message_list_toggle_threads): Clear the tree if we're changing
the view mode.
(message_list_toggle_threads): And reset the rowmap, since it is no
longer valid.
(build_tree): If we are building into an already empty tree, just
build into that (probably irrelevant optimisation).
(build_subtree): Build hte subtree in the same order as we got it,
not inverted order.
(message_list_set_threaded): New function to select the threaded
view/flat view.
(mail_do_regenerate_messagelist): Removed references to
mail_config, get it from the ml->threaded var instead.
(message_list_destroy): No longer free the key data for the
uid_rowmap.
(new_id_from_uid): Convert a uid string into an id string.
(new_id_from_subject): Likewise for subject strings.
'id' strings replace the 'uid:' and 'subject:' stuff with
accessors and macros and use less memory and is more readable.
(id_is_uid): macro to check if an id string is a uid.
(id_uid): Returns the uid part of a uid id string.
(id_subject): Returns the uid part of a subject id string.
(build_subtree): Use the new id functions, and dont duplicate the
uid in the uid rowmap, but just reference it from the tree node.
(node_equal): Use new id functions.
(add_node_diff): And here too.
(remove_node_diff): And here. Also remove the uid from the
rowmap, and dont free it anymore.
(get_message_info): And here.
(get_message_uid): And here.
(subtree_unread): And here.
(ml_tree_value_at): "
(ml_tree_set_value_at): Noted a memory leak. do_flag_messages()
doesn't free the contents of the uid array, just the uid array
(well that i can tell, teh code has more problems anyway).
(ml_tree_set_value_at): And fix the id accessors.
(save_node_state): "
(build_flat): Use id macros/functions. Dont alloc memory for hash
key.
(build_flat_diff): Use id macros.
(build_flat_diff): Remove the hash table entry before freeing its
key data (in the node).
(free_key): Removed. Keys are no longer alloc'd.
(clear_tree): When we clear the tree, also clear the uid_rowmap,
as it is no longer valid (or contains allocated keys!).
(free_tree_ids): Renamed from nuke_uids.
(free_ids_cb): Renamed from nuke_uids_cb.
(free_tree_ids): Changed arg to be a ETreeModel directly.
(ml_tree_value_at): Map id to subject using the right macro.
(free_tree_ids): Check we have any nodes to traverse first.
(build_flat): Insert to row -1 to append the nodes (faster).
(remove_node_diff): Only remove the uid rowmap entry if it is
referencing this node (i.e. the key string is the same key string,
not just a matching key string).
(add_node_diff): Remove the uid rowmap entry before inserting a
new one to force the key to be replaced. This is required as the
tree may temporarily contain duplicate messages during the
rebuilding phase.
(message_list_set_search): New function, set the search string.
Only redo the search if it has changed, etc.
(mail_do_regenerate_messagelist): Made static. There is no need
for external code to call this.
(message_list_set_folder): NOP if the new folder is the same.
(message_list_set_folder): Clear the tree before rebuilding it.
(message_list_select): Ok, this wins the award for 'most bizarre
interface'. Changed the start row to mean the end of the list if
we supply -1, rather than the start of the list. Also fixed the
endpoints (it would never select message 0 if searching
backwards).
(idle_select_row): Changed start row to 0 from -1.
(message_list_end): Removed.
(message_list_home): Removed.
(go_to_message): Removed. message_list_select can do this.
(message_list_select): Check that direction is one of the valid
ones, otherwise we could be thrown for loops.
2000-10-31 Not Zed <NotZed@HelixCode.com>
* message-list.c (node_equal): Compares an etree node with a
message-thread node to see if they point to the same object.
(add_node_diff): Adds a new thread node to the etree.
(remove_node_diff): Removed an etree node, freeing any additional
data.
(build_subtree_diff): Takes an existing etree definition, and a
new thread definition and makes the etree match, using as few
operations as possible.
(do_regenerate_messagelist): No longer free/clear the uid/rowmap
here.
(regenerate_messagelist_input_t): Added a tree field - are we
building a tree view?
(regnerate_messagelist_data_t): Added a tree field, if we built a
tree result. Added a changes parameter, for building diff's after
search/etc.
(mail_do_regenerate_messagelist): Setup the tree indicator.
(build_flat_diff): Apply a changeset to a message list.
(build_flat): Added a changes argument, if present, use
build_flat_diff() to build the list.
(do_regenerate_messagelist): If we are generating a threaded view,
build the threaded list here, rather in another separate
invocation.
(cleanup_regenerate_messagelist): Call build_tree directly on the
threaded list.
(message_list_init): Init the uid_rowmap hash table here instead
of somewhere odd.
(message_list_destroy): Assume uid_rowmap exists.
(do_regenerate_messagelist): Remove the code here that is messing
with the message list data (search/uid_rowmap). We're in a
different thread boys ...
2000-10-26 Not Zed <NotZed@HelixCode.com>
* message-list.c (cleanup_regenerate_messagelist): Fixed some
logic to make more sense (gboolean)!pointer replaced with
(pointer != NULL).
(build_tree): Put the tree pre/post change stuff in here, where it
should be.
(build_flat): Same here.
(cleanup_regenerate_messagelist): Remove model_changed stuff here.
(setup_regenerate_messagelist): Remove pre_change stuff here.
2000-10-20 Not Zed <NotZed@HelixCode.com>
* message-list.c (main_folder_changed): Perform incremental update
of the display for flat view.
(ml_tree_value_at): Spit out a mroe meaningful warning when we
can't find the uid in our tree, in the folder.
* message-thread.c (thread_messages): Made public.
(thread_messages_free): Made public.
(thread_messages): Now we also return a struct _thread_messages,
which is passed to other functions.
(container_free): Renamed from thread_messages_free.
(thread_messages_free): Take a thread_messages argument.
(thread_messages_add): New function to add a list of uid's to the
thread list.
(thread_messages_remove): Likewise, for removing them.
(cleanup_thread_messages): Change for struct changes.
(do_thread_messages): Likewise.
2000-10-19 Not Zed <NotZed@HelixCode.com>
* mail-tools.c (mail_tool_do_movemail): removed unused var
* folder-browser.c (search_full_clicked): Fix for api changes,
such as it can be called an api, its mroe an utter mess infact.
(search_set): Same.
(search_set): And here.
(folder_browser_clear_search): And here.
* message-list.c (folder_changed): Copy and forward the changeinfo
list to the mian thread.
(main_folder_changed): Free the changeinfo. Todo: something smart
with this information.
(struct regenerate_messagelist_input_s): Added a changes field.
(mail_do_regenerate_messagelist): Added a change list argument.
(message_list_set_folder): Fix for mail_do_regenreate_messagelist
api.
(message_list_toggle_threads): Same.
2000-10-18 Iain Holmes <iain@helixcode.com>
* mail-config-gui.c (mail_config): Make all the CLists have passive
titles.
(identity_dialog): Make the default button the "OK" button, and set
the dialog to close on pressing return on the entryboxes.
2000-10-17 Iain Holmes <iain@helixcode.com>
* mail-config-gui.c (service_page_item_new): Disable the optionmenu
because it is empty.
(service_page_item_auth_fill): Enable the optionmenu as there's stuff
in it now.
* mail-callbacks.c (reply_to_sender): Call check_send_configuration
when we have the FolderBrowser because if it is done in mail_reply
(with passing NULL) it will only be able to continue if the mailer
has already been configured.
(reply_to_all): Same.
2000-10-18 Not Zed <NotZed@HelixCode.com>
* folder-browser.c (folder_browser_gui_init): No, we REALLY dont
want to perform an immediate search as the keys are pressed.
* mail-display.c (on_object_requested): Kill a minor warning with
a cast.
* mail-config.c: Include mising ctype.h to kill a warning.
* message-thread.c (main): Fixed the test case for api changes.
* message-list.c (message_list_drag_data_get): Set some flags to
get_folder(). I dont even think this will work because
mail_tool_get_folder doesn't handle file url's.
* mail-vfolder.c (vfolder_uri_to_folder): Pass appropriate flags.
* mail-ops.c (do_setup_folder): Pass appropriate flags. Hmm,
whats the difference between setup and create. *shrug*
(do_create_folder): Pass appropriate flags to get_folder. Needs a
way to specify the index flag.
* mail-tools.c (mail_tool_get_folder_from_urlname): Changed create
to flags argument.
(mail_tool_get_local_inbox_url): Add an index argument.
(mail_tool_get_local_inbox): honour index flag.
(mail_tool_get_inbox): Changed for api change.
(mail_tool_uri_to_folder): Fixed calls to store_get_folder();
* mail-local.c (load_metainfo): Added an indexed field to the metainfo.
(save_metainfo): And save it too.
(do_reconfigure_folder): Honour index flag when creating the new
folder. Do not open the old folder with an index at all.
(mail_local_map_uri): Add an index argument - tells if the mbox is
indexed.
(mail_tool_local_uri_to_folder): Create & pass flags properly.
(#include gnome.h): Dont include all of gnome, just what we use,
and explicity include xml-memory, so we get xmlFree().
2000-10-16 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c (search_full_clicked): Un #if 0'd out
(search_full): Same.
(folder_browser_gui_init): Connect search_full and search_activate.
(search_set): Uncomment search_full()
* Makefile.am: Re-add `mail-search-dialogue.h' and
`mail-search-dialogue.c'.
2000-10-16 Jeffrey Stedfast <fejj@helixcode.com>
* mail-format.c (mail_generate_reply): Decode recipient names so
that they display nicely in the To and Cc fields.
(write_field_to_stream): Now takes another argument
'value_is_encoded' so that we know if we should decode that string
before proceding onward. Since the message subject is already
decoded before it's passed in, we don't want to decode it again
(wasted cpu time and/or any 8bit chars will be assumed to be
latin1 encoded and thus the decoded value will be corrupt).
2000-10-16 Chris Toshok <toshok@helixcode.com>
* mail-config-gui.c (service_page_get_url): only set the url->user
field if the user string is non-NULL and not empty.
2000-10-16 Not Zed <NotZed@HelixCode.com>
* message-list.c (message_list_setup_etable): Uh, fixed jeff's
wrong fix for setting the speficiation (the function changed to
set_state(), as can be seen in the e_table-scrolled_load_state()
call only 2 lines above).
2000-10-13 Not Zed <NotZed@HelixCode.com>
* message-list.c (message_list_setup_etable): oops, chose the
wrong thing to cut out after a merge conflict.
2000-10-15 Chris Toshok <toshok@helixcode.com>
* message-list.c (subtree_unread): ETreePath != GNode now, use
accessors.
(ml_tree_value_at): same.
(save_node_state): same.
(save_tree_state): same.
(nuke_uids_cb): convert to e_tree_model_node_traverse required
type.
(nuke_uids): g_node_traverse -> e_tree_model_node_traverse.
2000-10-14 Ettore Perazzoli <ettore@helixcode.com>
* evolution-mail.oafinfo: Add "evolution:shell-component-icon"
attribute.
2000-10-13 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (message_list_setup_etable): Don't free the
service name.
2000-10-12 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): sync & expunge the source folder
after filtering.
2000-10-12 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (message_list_setup_etable): Create the 'spec'
and 'extras' arguments and call e_table_scrolled_new() rather than
set_specification as that function no longer (?) exists.
Also started to add drag & drop functionality to something like
Nautilus (but #if 0'd it out until I had time to finish it and
till after 0.6).
2000-10-12 Not Zed <NotZed@HelixCode.com>
* message-list.c (message_list_setup_etable): Duh, fix the test
for the folder name, strstr != strcmp is it.
2000-10-10 Not Zed <NotZed@HelixCode.com>
* message-list.c (folder_to_cachename): Removed, changed callers
to use mail_config_folder_to_cachename instead.
* mail-config.c (mail_config_folder_to_cachename): New utility
function to get a cache name for a folder.
* mail-tools.c (mail_tool_do_movemail): Changed to return the path
to the mbox, rather than opening a folder of it.
* mail-ops.c (mail_incorporate_messages): Dont bother making the
pseudo messageinfo, filder_driver_filter_message will do it for
us.
(report_status): Callback to report status of filtering operation.
(do_fetch_mail): Changed significantly - for the api changes to
the filtering system. Also now incorporates a mailbox file
directly, without having to import it into a camel folder first.
(mail_incorporate_messages): Removed entirely, no longer needed.
* mail-vfolder.c (vfolder_refresh): Fix for context api changes.
(vfolder_uri_to_folder): Likewise.
* folder-browser-factory.c (create_ondemand_hooks): Changed for
api changes. Also only adds demand filters to the menu (fixed a
small logic bug).
2000-10-11 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (folder_etree_value_at): special case for
folders with NULL urls (which aren't selected/subscribeable).
(unsubscribe_folder_info): can't (un)subscribe from folders with
non-NULL urls.
(subscribe_folder_info): same.
2000-10-12 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Replace To with From except in Drafts, Outbox,
or Sent boxes. Make Subject column pay attention to text
attributes like bold and strikethrough.
2000-10-12 Iain Holmes <iain@helixcode.com>
* component-factory.c: Disable the executive summary.
2000-10-11 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (FOLDER_ETABLE_SPEC): set expansion to 0.0,
minimum-width to 16, and resizable to false for the subscribed
column.
(folder_info_subscribed): new function so we can do the correct
path munging.
(subscribe_folder_info): only add the folder to the storage if
there wasn't an exception subscribing it.
(unsubscribe_folder_info): same, but unsubscribing.
(folder_etree_value_at): use folder_info_subscribed.
(folder_toggle_cb): same.
(unsubscribe_folder_foreach): same.
(subscribe_folder_foreach): same.
(subscribe_dialog_gui_init): set the bold column on the text cell,
and add the subscribed pixbuf.
2000-10-11 Anna Marie Dirks <anna@helixcode.com>
* mail-threads.c: Changed the password-getting dialog so that the
text entry has focus.
2000-10-11 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (STORE_ETABLE_SPEC): change cell type to
"string" since we're not including it in the extras.
2000-10-11 Christopher James Lahey <clahey@helixcode.com>
* message-list.c, message-list.h, subscribe-dialog.c: Changed
these to use the proper form for the column element.
2000-10-11 Christopher James Lahey <clahey@helixcode.com>
* message-list.c, message-list.h, subscribe-dialog.c: Updated
these to the new ETable style of specifications.
2000-10-11 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (subscribe_dialog_gui_init): convert to the
new gal e-table stuff.
(html_size_req):
(html_new):
(put_html): #if 0 out the html functions since description stuff
isn't used and we don't want the warnings.
2000-10-11 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (subscribe_dialog_gui_init): remove the html
description stuff for now.
2000-10-10 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (folder_toggle_cb): umm.. duh :) only
subscribe if it's not subscribed, and vice versa.
(subscribe_folder_foreach): make sure to call
e_tree_model_node_changed.
(unsubscribe_folder_foreach): make sure to call
e_tree_model_node_changed.
2000-10-10 Chris Toshok <toshok@helixcode.com>
* mail-ops.c (setup_scan_subfolders): add a ref to input->storage
here so that the ref/unref pattern more closely matches other
mail-ops. also, this keeps the storage from being freed when we
hit the unref in cleanup_scan_subfolders, which is important
because we maintain a reference to it in the storage_hash in
component-factory.c
* subscribe-dialog.h: add storage field.
* subscribe-dialog.c (subscribe_folder_info): new function,
subscribe to a folder given it's CamelFolderInfo, and add it to
the shell - we're generating a path from the name of the folder
which is bad.
(unsubscribe_folder_info): same (except we unsubscribe and remove
from the shell).
(storage_selected_cb): unref the currently selected storage.
(subscribe_dialog_destroy): unref the currently selected storage.
(subscribe_dialog_construct): sc->storage = NULL.
* component-factory.c (mail_lookup_storage): new function, to look
up a EvolutionStorage corresponding to a CamelService. we ref the
EvolutionStorage before passing it back.
(mail_add_new_storage): insert the storage into storages_hash if
result is EVOLUTION_STORAGE_OK.
* mail.h: add prototype for mail_lookup_storage.
2000-10-10 Larry Ewing <lewing@helixcode.com>
* mail-format.c (mail_generate_reply): make sure we dup the return
value of get_reply_to or get_from when building the recipient list.
2000-10-10 Iain Holmes <iain@helixcode.com>
* mail-summary.c (generate_html_summary): Removed the <li> from the
HTML.
2000-10-10 Cody Russell <bratsche@gnome.org>
* mail-threads.c: Added #include <errno.h>
2000-10-09 Iain Holmes <iain@helixcode.com>
* mail-summary.c: Removed the extra arguments to rule_context_load.
2000-10-09 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c, subscribe-dialog.h: use our own etable to
display the stores, and get them from the mail-config api. put
#if 0'ed code in place to add/remove the folders from the shell
when they're subscribed/unsusbcribed. also, react to double
clicks in the folder etable by toggling subscription status.
2000-10-08 Iain Holmes <iain@helixcode.com>
* mail-summary.c (create_summary_view): Updated to use new icon code.
2000-10-08 Iain Holmes <iain@helixcode.com>
* mail-summary.c (generate_html_summary): Generic function to
recreate the HTML of the summary. Checks all the folder summaries.
(generate_folder_summarys): Create a summary of all the vfolders
and the Inbox.
(create_summary_view): Generate the folder summarys before the
HTML.
2000-10-09 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser.c: Don't #include "mail-search-dialogue.h" as
it's missing from the repository.
(search_full_clicked): Temporarily `#if 0'ed out.
(search_full): Likewise.
(folder_browser_gui_init): Don't connect `search_full'.
(create_option_menu): Don't connect `search_menu_deactivate'.
(folder_browser_gui_init): Don't connect `search_activate'.
(search_set): Don't do `search_full()'.
(folder_browser_gui_init): Likewise.
* Makefile.am (evolution_mail_SOURCES): Remove
`mail-search-dialogue.h' and `mail-search-dialogue.c' as NotZed
forgot to put them into CVS.
2000-10-06 Not Zed <NotZed@HelixCode.com>
* mail-search-dialogue.c: New widget, full search dialogue for
mail.
* folder-browser.c (search_set): If we click on custom search, run
the full search dialogue.
(folder_browser_gui_init): Add a button to perform a full search.
(search_full): Bring up the mail search dialogue asynchronously.
(search_full_clicked): Handle search options.
(folder_browser_destroy): Free the saved rule if there is one
there.
(search_options[]): Added a custom option option - brings up the
full search dialogue.
(search_set): Disable the search entry if we are doing a full
search.
* mail-vfolder.c (vfolder_create_storage): Yay, finally
depeterised this stuff.
(vfolder_uri_to_folder): Removed an irrelevant comment.
* mail-callbacks.c (filter_edit): And here.
* mail-ops.c (do_fetch_mail): And here too.
* mail-autofilter.c (filter_gui_add_from_message): Fixed call to
context_load.
(filter_gui_add_for_mailing_list): And here too.
* folder-browser-factory.c (create_ondemand_hooks): Remove that
ondemand callback snot.
2000-10-05 Not Zed <NotZed@HelixCode.com>
* message-list.c (message_list_init_etable): Build the etable once
we know what folder we are going to use.
(save_header_state): Save the header spec to a cache file.
(message_list_destroy): Save the header spec.
(message_list_setup_etable): Setup the etable spec for this
folder, from a saved version if one exists, or to suit the folder
type (sent/received).
(message_list_set_folder): Setup the etable here once we have a folder.
2000-10-09 Michael Meeks <michael@helixcode.com>
* message-list.c (message_list_toggle_threads): re-write.
* folder-browser-factory.c (control_activate): update paths, need
CVS HEAD bonobo, use a listener not a verb.
2000-10-08 Miguel de Icaza <miguel@helixcode.com>
* mail-ops.c (mail_incorporate_messages): Tag string for translation
(do_flag_messages): ditto.
* mail-threads.c (pipe_write): Repeates writes on EINTRS.
(pipe_read): Repeats reads on EINTRS.
(mail_operation_queue): Use pipe_write
(mail_op_set_percentage): ditto.
(mail_op_hide_progressbar): ditto.
(mail_op_show_progressbar): ditto.
(mail_op_set_message): ditto.
(mail_op_get_password): ditto.
(mail_op_error): ditto.
(mail_op_forward_event): ditto.
(mail_operations_terminate): ditto.
(dispatch): use pipe_read.
(dispatch): use pipe_write
(dispatch): ditto.
* mail-ops.c (mail_incorporate_messages): Only show message being
incorporated every 2 seconds, to avoid a bunch of CORBA round trips.
(do_transfer_messages): ditto.
(do_forward_messages): ditto.
2000-10-07 Miguel de Icaza <miguel@helixcode.com>
* mail-ops.c (do_fetch_mail): Move the functionality to
incorporate messages into mail_incorporate_messages.
(mail_load_evolution_rule_context): New function. Move the
functionality for loading the context rules to its own function.
2000-10-06 Iain Holmes <iain@helixcode.com>
* mail-summary.c: Fix the locking up of the mail by only calling
camel functions from the camel thread, and ORBit functions from
the GTK thread. Watch for the message-changed signal again.
* component-factory.c (summary_fn, component_factory_init):
Re-enabled it, cos I think it works again.
* mail-display.h: Remove the pb_cache.
* Makefile.am: Readd the mail-summary.[ch] files and add the
evolution-services library to the link.
2000-10-06 Chris Toshok <toshok@helixcode.com>
* mail-ops.c (do_scan_subfolders): set the @subscribed_only
parameter to TRUE, since the subscribe UI is the only interface
that should show unsubscribed groups.
2000-10-06 Ettore Perazzoli <ettore@helixcode.com>
* mail-ops.c (do_scan_subfolders): Add missing @subscribed_only
parameter in the call to `camel_store_get_folder_info()'. [FALSE,
I hope that's right.]
2000-10-05 Jeffrey Stedfast <fejj@helixcode.com>
* mail-format.c (write_field_to_stream): Decode the header before
writing it to the header box.
* mail-callbacks.c (send_receieve_mail): fetch mail before
sending, this is a temp fix for POP-before-SMTP authentication.
2000-10-05 Michael Meeks <michael@helixcode.com>
* component-factory.c (summary_fn, component_factory_init):
Disable summary stuff, it appears to be badly broken.
* Makefile.am (evolution_mail_SOURCES): add mail-summary.[ch]
* subscribe-dialog.c (update_pixmaps): upd.
(set_pixmap): upd.
(subscribe_dialog_gui_init): upd.
remove redundant and annoying forward definitions.
* folder-browser-factory.c (control_deactivate): upd.
(control_activate_cb): upd.
(control_activate): upd.
(set_pixmap): upd.
(update_pixmaps): upd.
(register_ondemand): upd.
(create_ondemand_hooks): upd.
2000-10-04 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (address_compare): Use CamelInternetAddress
instead of my quick hack (aka InternetAddress).
2000-10-05 Iain Holmes <iain@helixcode.com>
* mail-summary.c: Don't watch for the message-changed signal.
2000-10-05 Iain Holmes <iain@helixcode.com>
* component-factory.c (component_factory_init): Setup the summary
factory as well.
(summary_fn): New function to create the ExecutiveSummaryComponent.
* mail-summary.c: Create the view, and update it when something
changes.
2000-10-04 Iain Holmes <iain@helixcode.com>
* mail-display.c (on_object_requested): Removed the pixbuf cache
as it would return the pixbufs in the reverse order every so often
and generally get all confused.
2000-10-04 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c (control_deactivate): Add back the
"sync folder on leave" hack that got lost in the UIHandler merge.
2000-10-04 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c: Instead of UnSelectAll, we want
InvertSelection.
* mail-callbacks.c (select_all): Finished this function.
(invert_selection): Finished. (was unselect_all - but that's not
what we really wanted as it'd be pointless. invert_selection is a
much more useful callback :-)
2000-10-04 Chris Toshok <toshok@helixcode.com>
* mail-tools.c (mail_tool_get_root_of_store): remove news specific
check.
(mail_tool_uri_to_folder): news: -> nntp:
2000-10-04 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_filter_ondemand): Don't expunge the source
mailbox on completion.
2000-10-04 Dan Winship <danw@helixcode.com>
* mail-ops.c (do_scan_subfolders): Don't try to add_folders if
get_folder_info returned NULL.
2000-10-04 Not Zed <NotZed@HelixCode.com>
* message-list.c (message_list_init_header): Fix the attachment
icon width.
(content_is_attachment): Perform some simple tests to see if the
message contains an attachment.
(build_subtree): Kill a pointless warning.
2000-10-04 Miguel de Icaza <miguel@helixcode.com>
* mail-callbacks.c (delete_msg): Added a comment to a piece of
code that I was trying to "fix" just to find that the strange
behaviour here that was about to be fixed, was actually a fix to
the problem I was trying to fix.
So put the original comments from Dan, and will hope that someone
with more knowledge about this can figure why the delete key wont
delete messages and select the next unread message.
2000-10-02 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (subscribe_dialog_destroy): destroy our
tree_model and remove the root node. also, release_unref our
control and view, and unref the listener.
* mail-tools.c (mail_tool_uri_to_folder): news url's contain host
names too, now.
2000-10-02 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c, subscribe-dialog.h: add a
storage-set-view-listener, and add a little printf saying what
storage was selected.
2000-10-02 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.c (subscribe_dialog_gui_init): get
Evolution::StorageSetView interface on our storage set view
control, and set "show_folders" to FALSE.
2000-10-02 Chris Toshok <toshok@helixcode.com>
* Makefile.am (INCLUDES): add -I$(top_srcdir)/widgets/misc
* subscribe-dialog.c (subscribe_dialog_gui_init): change the
window title to Manage Subscriptions, bold subscribed folders, and
add a title bar ala the evolution shell (but without the close
button).
2000-10-02 Chris Toshok <toshok@helixcode.com>
* subscribe-dialog.h: add fields for the storage set
Bonobo_Control and Evolution_StorageSetView interfaces.
* subscribe-dialog.c (subscribe_dialog_gui_init): create the uih
as early as possible, and add the storage set view to the left
side of the hpaned.
2000-09-22 Michael Meeks <michael@helixcode.com>
* folder-browser-factory.c (set_pixmap): upd.
(control_activate): upd.
2000-10-02 Dan Winship <danw@helixcode.com>
* mail-config-gui.c: Remove "Port" entry from source dialog. We'll
use "host:port" like Netscape and other programs do.
(service_page_get_url): If host ends in ":###", use that as port.
(service_page_set_url): If URL contains a port, append it to the
hostname, separated by a colon.
2000-10-02 Chris Toshok <toshok@helixcode.com>
* Makefile.am (evolution_mail_SOURCES): subscribe-control.[ch] ->
subscribe_dialog.[ch]
* mail-callbacks.c (manage_subscriptions): subscribe_control ->
subscribe_dialog. Also, pass the shell to subscribe_dialog_new.
* mail-types.h: SubscribeControl -> SubscribeDialog.
* subscribe-dialog.c, subscribe-dialog.h: rename from
subscribe-control.[ch].
* subscribe-dialog.c (subscribe_dialog_construct): pass
Evolution_Shell in.
(subscribe_dialog_new): takes Evolution_Shell argument now.
2000-10-02 Chris Toshok <toshok@helixcode.com>
* message-list.c (message_list_init_renderers): remove the 2 tree
pixbufs, so adjust the offsets to the score pixbufs. also, pass
NULL for the open/closed pixbufs to the tree cell renderer.
2000-10-02 Dan Winship <danw@helixcode.com>
* mail-ops.c (mail_do_scan_subfolders, etc): Update for
CamelFolderInfo changes.
* message-list.c (message_list_destroy): Don't save_tree_state if
there's no folder associated with the MessageList.
* folder-browser.c (folder_browser_set_uri): Only call
mail_do_load_folder if the URI is not "".
2000-10-02 Iain Holmes <iain@helixcode.com>
* mail-display.[ch]: Add a cache for the pixbufs, hashed on CID,
so that we only have to make a thumbnail once.
2000-10-01 Iain Holmes <iain@helixcode.com>
* mail-display.c: Generate the thumbnails on an idle function so
that the user interface isn't locked. Checks in case the widget it
will use to display the image isn't destroyed.
2000-10-01 Iain Holmes <iain@helixcode.com>
* mail-display.c (on_object_requested): If the attachment is an
image display a thumbnail of it, instead of the generic image
icon.
2000-09-29 Miguel de Icaza <miguel@helixcode.com>
* folder-browser-factory.c: Add print preview verb here.
* mail-callbacks.c (do_mail_print): Handle printing here, the
complete engine.
(mail_print_preview_msg): new. does print previewing.
(mail_print_msg): does printing of the message.
2000-09-29 Chris Toshok <toshok@helixcode.com>
* subscribe-control-factory.c, subscribe-control-factory.h: nuked.
* subscribe-control.c, subscribe-control.h: lots of changes. we
now pop up a dialog, and will have a storage set view on our left
side, like the shell does.
* mail.h: add prototype for manage_subscriptions.
* mail-callbacks.c (manage_subscriptions): new function, pops up
the subscribe dialog.
* folder-browser-factory.c: add the verb for managing
subscriptions.
* Makefile.am (evolution_mail_SOURCES): add subscribe-control.[ch]
again.
2000-09-28 Chris Toshok <toshok@helixcode.com>
* subscribe-control.h (subscribe_search): added prototype.
* subscribe-control.c (subscribe_search): new function.
* subscribe-control-factory.c (make_folder_search_widget): new
function, to add search widget to toolbar.
(control_activate): create the search widget and add it to the
toolbar.
2000-09-28 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_send_queue): Messages should be appended to Sent
as Seen.
(do_send_mail): Same.
2000-09-28 Ettore Perazzoli <ettore@helixcode.com>
* Makefile.am: Don't compile `subscribe-control' for now. It
needs to be converted to the new UI handler code in Bonobo; it
doesn't compile right now.
2000-09-27 Chris Toshok <toshok@helixcode.com>
* subscribe-control.c (subscribe_refresh_list): new function.
* subscribe-control.h (subscribe_refresh_list): new prototype.
* subscribe-control-factory.c (update_pixmaps): add RefreshList
pixmap. also, add it to the verbs list.
2000-09-27 Chris Toshok <toshok@helixcode.com>
* mail-types.h: add SubscribeControl typedef.
* Makefile.am (evolution_mail_SOURCES): add the subscribe stuff.
* subscribe-control-factory.h * subscribe-control-factory.c *
subscribe-control.c: * subscribe-control.h: Mostly mocked up
subscribe ui.
2000-09-27 Jeffrey Stedfast <fejj@helixcode.com>
Note: We need a configuration option to specify whether to log
filtering actions or not.
* mail-ops.c (do_filter_ondemand): Updated to pass a log file
pointer to filter_driver_run.
(do_fetch_mail): Same.
(mail_do_fetch_mail): Fixed a compiler warning.
2000-09-27 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c (composer_postpone_cb): Fix it so that "send
later" will still mark a message as being replied, forwarded,
whatever. Closes bug #568 on bugzilla.
2000-09-27 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_filter_ondemand): If the message has been
deleted, don't try filtering it - skip to the next message. Fixes
bugzilla bug #639.
2000-09-25 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c: Shuffling (un)select all menu items to
the Edit menu.
2000-09-25 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c: Added new menu items
* mail-callbacks.c (mark_as_seen): New callback to mark all
selected messages as Seen.
(mark_as_unseen): New callback to mark all selected messages as
Unseen.
(select_all): New callback to select all messages (not yet
finished)
(unselect_all): New callback to unselect all messages (not yet
finished)
2000-09-25 Not Zed <NotZed@HelixCode.com>
* message-list.c (folder_to_cachename): Function to convert a
folder name/path to a filename for per-folder data.
(save_tree_state):
(load_tree_state):
(free_tree_state): For loading/saving the state of the expansion
of nodes in the tree.
(message_list_destroy): Save the tree state when done.
(save_node_state): Changed logic, we save when the node should be
closed on startup. i.e. any new nodes with children automatically
default to being open.
(subtree_unread): Check for unread messages in a subtree. So
false messages (for tree roots) are properly displayed.
2000-09-25 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (address_compare): Updated to use Nat's
ENameWestern parser.
* Makefile.am: link against e-util/ename/libename.la
2000-09-25 Dan Winship <danw@helixcode.com>
* mail-ops.c: CamelException is not for compile-time errors.
Replace lots of argument checks in setup_ functions with
g_return_if_fails in the public functions. Also remove some
prototypes that weren't needed because they were for static
functions that are defined before they're used.
2000-09-23 Michael Meeks <michael@helixcode.com>
* folder-browser-factory.c (set_pixmap): upd.
(control_activate): upd.
2000-09-23 Ettore Perazzoli <ettore@helixcode.com>
* message-list.c (internet_address_new_from_string): Skip spaces
at the beginning of the string first before doing anything else.
The code that follows doesn't like the first character of the
string to be a space.
2000-09-22 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (address_compare): New comparison function for
email addresses.
(subject_compare): New comparison function for message subjects.
(message_list_init_header): Updated to use the new compare funcs.
2000-09-21 Jeffrey Stedfast <fejj@helixcode.com>
* mail-format.c (mail_generate_reply): Fixed some memory
leakage. Call free_recipients() so we don't leak memory.
2000-09-19 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_scan_subfolders): Use the folder's full_name so
recursive directory structures display correctly ;-)
2000-09-19 Dan Winship <danw@helixcode.com>
* mail-ops.c (do_scan_subfolders): Update for CamelFolder changes
(subfolder_names -> subfolder_info).
2000-09-19 Dan Winship <danw@helixcode.com>
* mail-callbacks.c (create_msg_composer, compose_msg, send_to_url,
mail_reply, forward_msg): * mail-format.c (mail_generate_reply): *
mail-ops.c (cleanup_edit_messages):
* mail-view.c (view_forward_msg): Deal with NULL composer.
2000-09-18 Dan Winship <danw@helixcode.com>
* main.c (main): Call gnome_vfs_init() since the composer now does
file operations (to get the MIME type of attachments).
2000-09-18 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c: Removed COL_ONLINE_STATUS because we don't want
that. Renamed COL_PRIORITY to COL_SCORE and set it up to sort-of
work, I'm not really sure which renderer I should use.
2000-09-18 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Added $(EXTRA_GNOME_CFLAGS) and
$(EXTRA_GNOME_LIBS). Removed unneeded libraries.
* component-factory.c, folder-browser-factory.c, folder-browser.c,
mail-callbacks.c, mail-config-gui.c, mail-display.c,
mail-display.h, main.c, message-list.c, message-list.h: Fixed the
#include lines to deal properly with gal.
2000-09-16 Michael Meeks <michael@helixcode.com>
* Makefile.am (INCLUDES): add datadir
* folder-browser-factory.c (control_activate): use it.
2000-09-15 Dan Winship <danw@helixcode.com>
* mail-callbacks.c (transfer_msg): Revert **Temp fix** from below
since the relevant shell bug has been fixed now.
* mail-ops.c (do_fetch_mail): Fix the sense of the "keep on
server" check so we're not doing this backwards. Don't
get_message_flags, because POP doesn't support it and it's
pointless anyway since we're setting deleted, not toggling it.
call camel_folder_sync with expunge=TRUE so that the deletions are
actually recorded.
2000-09-15 Dan Winship <danw@helixcode.com>
This bug was so much fun to fix the first time that I decided to
fix it again.
2000-07-11 Dan Winship <danw@helixcode.com>
* mail-ops.c (real_send_mail): Set the post_send_data flag
rather than toggling it. (Maybe we'll need more control
over it later, but for now, the only flag we set is
"replied", and we want that set, not toggled.)
2000-09-14 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c (transfer_msg): **Temp fix** Send "" as the
default folder to select as anything else seems to cause a
segfault in shell's user_get_folder().
(check_configured): A spoon full of 'line wrapping' makes the
medicine go down, the medicine go dowwwwn...
2000-09-14 Iain Holmes <terrorist@gegl.org>
* mail-callbacks.c (check_configured): Ask if you want to
configure the mail client if it isn't configured already.
(check_send_configuration): Remove the error box if mail isn't
configured.
(send_queued_mail): Same.
2000-09-14 Dan Winship <danw@helixcode.com>
* mail-ops.c (setup_append_mail): camel_folder_append is perfectly
happy to take a NULL info.
2000-09-14 Michael Meeks <michael@helixcode.com>
* folder-browser-factory.c: move fn to bonobo.
(set_pixmap): update.
(control_deactivate): add bonobo_ui_handler_unset_container
2000-09-14 Christopher James Lahey <clahey@helixcode.com>
* mail-config-gui.h: Changed the include here because it caused
make distcheck to fail for me. I changed it from <Evolution.h> to
"shell/Evolution.h". This seems to have fixed things.
2000-09-14 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): Only use the cache if the user plans
to keep_on_server.
2000-09-14 Michael Meeks <michael@helixcode.com>
* folder-browser-factory.c (control_deactivate): kill
warning. (control_activate): set threaded toggle state,
add freeze / thaw.
(set_pixmap, fill_toolbar, update_pixmaps): update.
2000-09-13 Christopher James Lahey <clahey@helixcode.com>
* folder-browser-factory.c: Fixed a warning (Missing include
file.)
2000-09-12 Ettore Perazzoli <ettore@helixcode.com>
($(EVOLUTION_MAIL_CORBA_GENERATED)): Add space after `-I'.
2000-09-12 Ettore Perazzoli <ettore@helixcode.com>
* Makefile.am: Remove `ui.xml' stuff.
2000-09-12 Dan Winship <danw@helixcode.com>
* mail-local-storage.c (mail_local_storage_startup): set
folder_tree before adding the listener, since that will eventually
invoke callbacks that will look at it.
* folder-browser-factory.c (control_deactivate): sync the folder
on deactivate.
2000-09-12 Ettore Perazzoli <ettore@helixcode.com>
* message-list.c (on_right_click): Also display the name of the
mailing list in the "Filter on Mailing List" item for additional
Coolness factor.
* mail-autofilter.c (filter_gui_add_for_mailing_list): Create the
rule with `filter_filter_new()' so that it also has an action
part.
* mail-mlist-magic.c (get_header): Use the right header name to
retrieve the header.
2000-09-12 Ettore Perazzoli <ettore@helixcode.com>
* message-list.c (on_right_click): Grey out the mailing list
filter item if `mail_mlist_magic_detect_list()' returns NULL on
this message [i.e., if we cannot figure out a mailing list for
this message].
(filter_mlist): Good boys don't use F words.
* mail-mlist-magic.c (check_sender): Work safely if
`header_name_return' or `header_value_return' are NULL.
(check_x_been_there): Likewise.
(check_delivered_to): Likewise.
(check_x_mailing_list): Likewise.
(check_x_loop): Likewise.
(get_header): Use the right header name to retrieve the header.
* message-list.c (on_right_click): Mark strings for translation.
2000-09-12 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser-factory.c: Use the latest, shiny, amazing TigerT
art for the toolbar.
* component-factory.c: #include "mail-local-storage.h".
(owner_set_cb): Removed unused variable.
* message-list.c (filter_sender): Made static.
(filter_recipient): Likewise.
(filter_subject): Likewise.
(vfolder_recipient): Likewise.
(vfolder_sender): Likewise.
(vfolder_subject): Likewise.
* mail.h (vfolder_subject): Removed prototype [WTF was this doing
here?!?!].
(vfolder_sender): Likewise.
(vfolder_recipient): Likewise.
(filter_subject): Likewise.
(filter_sender): Likewise.
(filter_recipient): Likewise.
* message-list.c: Added a new "Filter on mailing list" menu item.
(filter_mlist): Callback for this menu item. Use
`filter_gui_add_for_mailing_list' to pop up the filter dialog with
the appropriate rule.
* mail-autofilter.c (filter_gui_add_for_mailing_list): New.
* message-thread.c (dump_tree): Removed unused variable.
* mail-mlist-magic.c: New.
* mail-mlist-magic.h: New.
* mail-autofilter.c (rule_match_recipients): Mark strings for
translation.
(rule_from_message): Likewise.
(filter_gui_add_from_message): Likewise.
2000-09-12 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): Was trying to unhook an event from
the wrong folder - oops.
2000-09-12 Not Zed <NotZed@HelixCode.com>
* message-thread.c: Reverted to version 1.15.
(remove_node): Ok, if a node has a parent, remove it from the
parent list, otherwise remove it from the (supplied) root list.
(group_root_set): When we merge children, free the lost node.
(thread_messages_free): Remove the return, run as is.
(prune_empty): Plugged another small leak.
2000-09-11 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c (run_filter_ondemand): Updated to use the new
mail_do_filter_ondemand.
* mail-ops.c (do_fetch_mail): Update to use the new
filter_driver_run args.
(do_filter_ondemand): Updated to use the new filter_driver_run
args.
(mail_do_filter_ondemand): Take a FilterContext as a argument
instead of a driver as we need to destroy the filter inside the
do_filter_ondemand function and things'd get messy.
2000-09-11 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): Don't have the filter driver
self_destruct.
2000-09-11 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): If we're fetching from an mbox
formatted file then we need to do some special-casing.
2000-09-11 Ettore Perazzoli <ettore@helixcode.com>
* component-factory.c (owner_set_cb): Call
`mail_local_storage_startup()' to set up handling of the local
storage.
* mail-local-storage.c: New.
* mail-local-storage.h: New.
2000-09-11 Christopher James Lahey <clahey@helixcode.com>
* mail-display.c: Fixed some warnings.
2000-09-11 Dan Winship <danw@helixcode.com>
* mail-display.c, mail-format.c: Another big rewrite of this
stuff. Now all (well, most) attachments get a small icon with a
description and a (non-obvious) right-click pop-up menu with
options to save, open in an external program, or show/hide inline.
TODO: antialias the icon, add more options to the pop-up for
certain MIME types, add an icon to the headers, fix PGP to work
like everything else, fix message/external-body to work again,
add some icon caching action, etc, etc.
2000-09-09 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): Use the CamelUIDCache so that we
only retrieve *new* messages and also send notes to the status bar
telling it which message we're downloading so that Ettore can
sleep at night ;-)
2000-09-09 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): Updated to not send hook/unhook data
to filter_driver_run as it no longer takes those args.
(do_filter_ondemand): Same. Also wrap filtering in freeze/thaw to
prevent signals from being queued up
2000-09-09 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): Freeze the default folder before
filtering and thaw it afterward to prevent a ton of
"folder_changed" signals from being queued.
2000-09-08 Christopher James Lahey <clahey@helixcode.com>
* folder-browser.c, mail-config-gui.c, mail-ops.c: Fixed some
warnings.
* message-list.c: Added base ETableModel functions.
2000-09-08 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): Updated to pass a CamelMessageInfo
to filter_driver_run
(do_filter_ondemand): Same.
2000-09-07 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_filter_ondemand): Updated to check the boolean
return code from filter_driver_run to find out whether or not the
message was filtered so that it can decide whether or not to
delete the message from the source folder or not.
2000-09-07 Jesse Pavel <jpavel@helixcode.com>
* mail-format.c (mail_generate_reply) Changed the behavior of
Reply-to-All so that the sender's address does not appear in
the cc: list.
2000-09-07 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): Updated to pass an exception to
filter_driver_run and also check the exception before deleting the
message from the source folder.
(do_filter_ondemand): Updated to pass an exception to
filter_driver_run
2000-09-07 Dan Winship <danw@helixcode.com>
* session.c (session_init): Pass a storage dir to
camel_session_new now.
* main.c (main): Can't call session_init here now, because it
requires evolution_dir to be set.
* component-factory.c (owner_set_cb): call session_init here.
* mail-ops.c (do_fetch_mail): Fix previous fix. (Free the uids,
just do it correctly.)
2000-09-07 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (do_fetch_mail): Don't free uids, let the camel
folder do that when it gets finalized
2000-09-06 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (mail_do_filter_ondemand): New async function to
filter messages on demand.
(do_fetch_mail): Updated to filter 1 message at a time using the
new filter-driver code
* mail-callbacks.c (composer_postpone_cb): Send NULL as the
message info.
(run_filter_ondemand): Use mail_do_filter_ondemand instead of
filter_driver_run
* mail-tools.c: Removed mail_tool_filter_contents_into and
mail_tool_fetch_mail_into_searchable as they have now been
deprecated.
2000-09-06 Dan Winship <danw@helixcode.com>
* message-list.c (clear_tree): set the data to NULL for the tree
root, so nuke_uids won't try to free anything.
2000-09-06 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser.c (folder_browser_new): @shell made const.
`CORBA_Object_duplicate()' it before storing it.
(folder_browser_destroy): Free the shell object with
`CORBA_Object_release()', not `CORBA_free()'.
* folder-browser-factory.c (folder_browser_factory_new_control):
@shell made const.
2000-09-05 Dan Winship <danw@helixcode.com>
* mail-display.c (make_safe_filename):
* mail-format.c (handle_mystery):
* mail-identify.c (mail_identify_mime_part):
camel_mime_part_get_filename now deals with both
Content-Disposition and Content-Type.
2000-09-05 Peter Williams <peterw@helixcode.com>
* mail-ops.c (cleanup_load_folder): Check for NULL folder.
(mail_do_setup_folder): Copy the 'name' parameter so that
we can free it.
* message-list.c (nuke_uids): Depth '-1' means "unlimited", not 0.
2000-09-05 Dan Winship <danw@helixcode.com>
* component-factory.c (owner_set_cb): Re-rename "Sent".
* folder-browser.c (fb_resize_cb): Remove the "+ 90" here since it
seems to break things for me, and it's not commented anyway and
there's no excuse for adding 90 to a number with no explanation.
2000-09-05 Peter Williams <peterw@helixcode.com>
* folder-browser.c (folder_browser_destroy): Don't free the shell;
it's not ours.
2000-09-05 Dan Winship <danw@helixcode.com>
* mail-tools.c (mail_tool_move_folder_contents): only call
camel_folder_get_message_info if the folder has
summary_capability. Don't hack up a fake CamelMessageInfo:
append_message will take NULL.
* mail-ops.c: Replace mail_do_setup_draftbox,
mail_do_setup_outbox, and mail_do_setup_sentbox with
mail_do_setup_folder.
(do_send_mail, do_send_queue): s/sentbox_folder/sent_folder/
* component-factory.c (owner_set_cb): Use mail_do_setup_folder,
rename sentbox_folder to sent_folder, and call
mail_operation_wait_for_finish after the setup_folder calls in
case anything needs to use the _folder variables.
2000-09-04 Jeffrey Stedfast <fejj@helixcode.com>
* mail-format.c (mail_generate_reply): Applied Jesse's patch that
will append a signature to the replied message text
* folder-browser-factory.c: Changed "Send & Receieve" back to "Get
Mail" temporarily so that the toolbar buttons don't all get
stretched to some weird proportion
2000-09-03 JP Rosevear <jpr@helixcode.com>
* mail-config.c (mail_config_add_news): Copy the passed in item
before adding
(mail_config_add_source): ditto
(mail_config_add_identity): ditto
* mail-config-gui.c (mail_config): We don't actually need a notebook
pointer.
(identities_edit_clicked): Don't explicitly destroy, we are using
gtk_clist_set_data_full now
(sources_edit_clicked): ditto
(news_edit_clicked): ditto
(mail_config): Use gtk_clist_set_row_data_full to kill leaks
2000-09-03 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c: Change the "Get Mail" toolbar button
to become "Send & Receieve"
* mail-callbacks.c (send_queued_mail): New callback function for
sending queued mail
(send_receieve_mail): New callback for Send & Receieve that
basically just calls send_queued_mail and then fetch_mail
* mail-ops.c (cleanup_send_mail): Mod to be able to handle a NULL
composer window
(setup_send_mail): Modified to handle a NULL composer widget
(mail_do_send_queue): New convenience async function to send all
messages in a folder (aka all messages in a queue)
2000-09-02 Jeffrey Stedfast <fejj@helixcode.com>
* mail-tools.c (mail_tool_move_folder_contents): Since POP3
doesn't implement get_message_info, we need to check for info to
be NULL. In this case, we need to make our own info structure to
pass to append_message and then remember to free it
afterward. Should we even bother with get_message_info? And if so,
should we then implement get_message_info for POP3?
2000-09-02 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser.c (etable_key): Make the `Home' key to move to
the beginning of the list and `End' to the end of it, using
`message_list_home()' and `message_list_end()'.
* message-list.c (message_list_home): New.
(message_list_end): New.
* folder-browser.c (folder_browser_new): Don't ref the shell here.
(folder_browser_destroy): Don't unref the shell. Instead,
`CORBA_free()' the object reference.
* folder-browser-factory.c (control_activate): Bind "Open in New
Window" to `Ctrl-O'.
2000-09-02 Lauris Kaplinski <lauris@helixcode.com>
* mail-config-gui.c: Use e_utf8 wrappers
* main.c (main): Do e_unicode_init, so we are not confusing
libunicode
2000-09-01 Christopher James Lahey <clahey@helixcode.com>
* folder-browser.c: Removed a warning.
2000-09-01 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c (compose_msg): Attach a callback to the
postpone signal
(send_to_url): Same
(mail_reply): Same
(forward_msg): Same
(composer_postpone_cb): Callback function for the postpone signal
* mail-ops.c (mail_do_setup_outbox): New convenience function to
load the Outbox folder
(mail_do_setup_sentbox): Same, but for Sentbox.
(do_send_mail): Now saves messages in Sentbox if sent successfully
(mail_do_append_mail): New convenience async function for
appending messages to a folder
* component-factory.c: Added outbox_folder and sent_folder
(owner_set_cb): Call our new convenience functions to load Outbox
and Sentbox
2000-09-01 Ettore Perazzoli <ettore@helixcode.com>
* mail-ops.c (cleanup_scan_subfolders): Update for the extra arg
needed by `evolution_storage_new_folder()'.
* mail-vfolder.c (vfolder_refresh): Likewise.
2000-08-31 Peter Williams <peterw@helixcode.com>
* folder-browser.c (folder_browser_new): Don't ref the shell:
causes a race upon exit.
(folder_browser_destroy): Don't unref it.
* mail-config-gui.c (service_page_item_new): Add a checkbutton
"use default port" to make life simple.
(service_page_get_url): Honor use_default_port.
(service_page_set_url): Set use_default_port based on the input
URL.
(toggle_port): New function, sets the sensitivity of the
port entry based on "use default port"
(config_do_query_authtypes): Make this asynchronous, as it
may involve connecting to a server.
(service_page_detect): Call the async auth querier.
(service_page_item_new): Put the authentication stuff in if
the url_flags have URL_ALLOW_AUTH. Call the async auth querier
to get the info.
2000-08-30 Ettore Perazzoli <ettore@helixcode.com>
* mail-view.c (mail_view_create): Make the HTML widget grab the
focus.
2000-08-30 Peter Williams <peterw@helixcode.com>
* mail-config-gui.c (do_test_service): Explicitly connect to
the service again.
* component-factory.c (mail_load_storages): Now that
camel_service_get_provider exists, use it to make this function
much simpler.
2000-08-29 Peter Williams <peterw@helixcode.com>
* folder-browser.c (folder_browser_new): Ref the Evolution_Shell.
Is this correct, or is it a circular reference?
2000-08-29 Dan Winship <danw@helixcode.com>
* mail-ops.c (mail_do_send_mail): Update this and related
functions to no longer take a From address. (The composer deals
with it itself now.)
(do_send_mail): Add the Evolution version back to the X-Mailer
header (this change got lost in the thread migration).
* mail-callbacks.c (composer_send_cb): Don't re-fetch the From
address. It's set by the composer now. Don't free the
post_send_data from here.
(mail_reply): Attach to the composer's destroy signal to free the
psd. (The current code would free it more than once if an error
occurred while trying to send the first time.)
2000-08-28 Peter Williams <peterw@helixcode.com>
* mail-config-gui.c (mail_config_apply_clicked): Add new news sources,
not only stores.
2000-08-28 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c (composer_send_cb): Free the from address when
we're done with it. Also, e_msg_composer_hdrs_get_from returns
alloc'd memory so don't strdup it.
2000-08-28 Peter Williams <peterw@helixcode.com>
* mail-ops.c (do_transfer_messages): Add status messages.
(do_flag_messages): Same.
(do_scan_subfolders): Same.
(do_forward_messages): Same.
(do_view_messages): Same.
2000-08-28 Ettore Perazzoli <ettore@helixcode.com>
* mail-view.c (mail_view_create): Use `gnome_app_set_toolbar()'
the easy way instead of doing things manually with `GnomeDock' and
`gnome_app_add_toolbar()'.
(MINIMUM_WIDTH): New #define.
(MINIMUM_HEIGHT): New #define.
(view_size_allocate_cb): New, callback for the "size_allocate"
signal of the mail view. It saves the last allocation in a static
`last_allocation' variable.
(mail_view_create): Connect it.
(set_default_size): New function. Set the default width/height to
the last allocation width/height; if the width/height is less than
the `MINIUM_WIDTH' or `MINIMUM_HEIGHT', use that value instead.
* mail-tools.c (mail_tool_move_folder_contents): Show `i + 1', not
`i', so that we correctlly start counting from one instead of zero.
2000-08-28 Peter Williams <peterw@helixcode.com>
* *.c: s,mail_dialog_run,gnome_dialog_run,g.
* main.c (main): Since only the main thread is dealing with GTK+,
free the GDK threads mutex and never worry about locking again.
2000-08-28 Jeffrey Stedfast <fejj@helixcode.com>
* mail-crypto.c (mail_crypto_openpgp_encrypt): Fix to prevent
possible buffer overflows and a logic fix.
2000-08-27 Jeffrey Stedfast <fejj@helixcode.com>
* mail-crypto.c (mail_crypto_openpgp_clearsign): New crypto
function to clearsign plaintext
2000-08-27 Ariel Rios <ariel@arcavia.com>
* folder-browser-factory.c (control_activate): Added bonobo menu
handler for mark_all_deleted function.
* mail.h: (mark_all_deleted): Added prototype.
* mail-callbacks.c (mark_all_deleted): Added callback for marking
all displayed messages in a folder as deleted.
2000-08-26 Ettore Perazzoli <ettore@helixcode.com>
* mail-view.c (mail_view_create): Use
`gtk_window_set_default_size' on the toplevel instead of
`gtk_widget_set_usize()', and make the default size smaller.
2000-08-25 Christopher James Lahey <clahey@helixcode.com>
* mail-crypto.c: Fixed an uninitialized variable.
2000-08-26 JP Rosevear <jpr@helixcode.com>
* evolution-mail.gnorba: Kill
* Makefile.am: Remove gnorba related stuff
2000-08-25 Peter Williams <peterw@helixcode.com>
* mail-config-gui.c (service_page_item_new): If the service wants
a host, also let the user specify a port.
(MailDialogServicePageItem): Add members for the port GtkEntry and
the default port.
(service_page_get_url): Translate the port in the entry back into
the CamelURL.
(service_page_set_url): Read in the port from the URL or use
the default.
2000-08-25 Jeffrey Stedfast <fejj@helixcode.com>
* mail-crypto.c (mail_crypto_openpgp_encrypt): Implemented PGP 2.x
encryption. We only need to get the passphrase if we plan to sign
the text, otherwise we don't need to worry about getting the
passphrase.
2000-08-24 Lauris Kaplinski <lauris@helixcode.com>
* folder-browser.c: Use e_utf8 wrappers
* mail-config-gui.c: Use e_utf8 wrappers
2000-08-24 Peter Williams <peterw@helixcode.com>
* folder-browser-factory.c (control_activate): Add all the
functions from message-list.c's popup menu to the main
menu as well
* message-list.c (vfolder_subject): These functions become
public.
* mail-callbacks.c (mark_all_seen): Don't call camel_folder_get_uids
here. IMAP, for example, will try to communicate with the IMAP
server during that call.
* mail-ops.c (cleanup_fetch_mail): Tell the user
which URL has no new mail, as they may be checking
more than one source.
(mail_do_flag_all_messages): New function. Flags all of
the messages in a folder. Something of a hack. This merely
extends the flag_messages operation; it doesn't implement
a new one.
(do_flag_messages et al): Fetch the uids if we need to;
use camel_folder_free_uids if necessary, etc.
* mail-tools.c (mail_tool_move_folder_contents): Add
messages to tell the user what's going on.
2000-08-24 Christopher James Lahey <clahey@helixcode.com>
* folder-browser-factory.c: Fixed some warnings in the uihandler
code.
2000-08-24 Peter Williams <peterw@helixcode.com>
* component-factory.c (mail_load_storages): New function.
Loads a list of URI's as mail storages, and inserts them
into the shell's folder tree if appropriate (really, only
puts them into the folder tree.)
(mail_add_new_storage): Insert a storage into the folder
tree. Not always appropriate (eg, /var/spool/mail/user is
a storage that shouldn't be in the folder tree.)
(create_view): Generate the Evolution_Shell and pass it
to folder_browser_factor_new_control so that its member
'shell' can be set.
(owner_set_cb): Instead of create_news_storage and
creating the imap storages, load the news storages and
mail storages via mail_load_storages().
* folder-browser-factory.c (control_activate): Change to
use providers_config again instead of mail_config. Pass
the folderbrowser so that the config code knows where
to insert the new storages if any are created. Pass
forget_passwords the folderbriwser, too, for good luck.
(folder_browser_factory_new_control): Take a new parameter,
the Evolution_Shell that we belong to. The field in
FolderBrowser has been there but was never getting set by
anything, and we need this to be able to insert new storages
into the shell's folder list.
* folder-browser.c (folder_browser_new): Accept the
new Evolution_Shell parameter. Set it. (Should we
ref it or something?)
* mail-config-gui.c (struct MailDruidDialog): Store an
Evolution_Shell. With this we can insert the stores into
the shell's folder list.
(struct MailDialog): Same.
(service_page_item_changed): Close a leak.
(identity_dialog): Unswitch the Add/Edit identity titles.
(news_dialog): Analogous to above.
(mail_druid_finish): Add the new mail source to the shell
view.
(mail_config_druid): Take a new Evolution_Shell parameter
for later use.
(mail_config_apply_clicked): Add all the mail sources to
the shell view.
(mail_config): Take a new Evolution_Shell parameter.
* mail-callbacks.c (check_configured): Accept a FolderBrowser
so that we know where to put the new storages if any are
created. Almost all the callbacks are passed a FB * anyway
so this isn't a big deal.
(check_send_configuration): Make sure that we're configured
enough to be able to send mail. composer_send_cb() used to
do this, but it would need a FolderBrowser *, and there are
too many entry points to composer_send_cb to make this
feasible.
(fetch_mail): Pass the extra parm to check_configured().
(free_psd): Move so that composer_send_cb can call this
directly.
(composer_send_cb): Don't check for proper configuration
here -- it is the caller's responsiblity to call
check_send_configuration(). Call free_psd() directly.
(compose_msg): Call check_send_configuration().
(send_to_url): Same. This is called from mail-display.c,
though, and cannot reasonably be passed a FB. So: we can't
start up the config dialog directly; the user must do it
manually. Oh well.
(mail_reply): Same as above.
(forward_msg): Same as compose_msg().
(edit_msg): Same as above.
(providers_config): Reenable so that we can pass mail_config
its FolderBrowser.
* mail-display.c (write_data_to_file): Use the much more
straightforward run_and_close to retrieve the user's answer,
instead of the reply callback stuff.
* mail-threads.c (mail_dialog_run): New wrapper for
gnome_dialog_run that will take care of the GDK lock correctly.
Far far more complicated than it should be.
(mail_dialog_run_and_close): Analogous to above.
(read_msg): Set inside_read_msg and unset it for the benefit
of the two above functions. Don't bracket ourselves in
GDK_THREADS_ENTER/_LEAVE anymore.
(mail_operation_queue): Use mail_dialog_run_and_close.
(show_error): As above.
(get_password): As above.
* mail-display.c (write_data_to_file): This has the only
exception to the rule that "use mail_dialog_run(_and_close)
instead of the gnome equivalent always." Not quite sure why
it doesn't work here (the file selection window?).
* mail-config-gui.c (identity_dialog): Change to
mail_dialog_run_and_close.
(source_dialog): Same as above.
(news_dialog): Same as above.
(cleanup_test_service): Same as above.
(mail_config): Change to mail_dialog_run().
* session.c (mail_request_dialog): Change to
mail_dialog_run_and_close.
* mail-tools.c (mail_tool_uri_to_folder_noex): As above.
* mail-ops.c (cleanup_fetch_mail): As above.
* mail-local.c (local_reconfigure_folder): As above.
* mail-callbacks.c (check_send_configuration): As above.
(ask_confirm_for_empty_subject): As above.
(edit_msg): As above.
(filter_edit): As above.
2000-08-23 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c (control_activate): Reformat a bit,
make "Folder" appear before "Message", fill in the Message menu
more.
2000-08-23 Peter Williams <peterw@helixcode.com>
* mail-ops.c (describe_fetch_mail): Don't use the camel calls
to describe the operation.
2000-08-22 Peter Williams <peterw@helixcode.com>
* mail-tools.c (mail_tool_get_folder_from_urlname): Don't connect
to the service explicitly.
(mail_tool_send_via_transport): Don't connect to the transport
explicitly.
(mail_tool_get_root_of_store): Same.
* mail-config-gui.c (do_test_service): Just try camel_session_get_service,
which will now connect for us.
* message-thread.h: Add a note about *next being the first member
of struct _container... if it isn't, everything goes Very Wrong.
* message-thread.c (free_container): Extra debug print.
(remove_node): Handle the case of empty containers holding the child
that we're interested in.
(thread_messages_free): Extra debug print.
2000-08-20 Jeremy Wise <jwise@pathwaynet.com>
* folder-browser.c: (fb_resize_cb) Added function to monitor resize
of the e_paned in the main view.
2000-08-18 Peter Williams <peterw@helixcode.com>
* mail-tools.c (mail_tool_filter_contents_into): Fix a race. filter_driver_run is an
async operation so it won't even be started by the time we sync the folders and check
for the movemailbox to be emtpy. Thus the empty check for the movemail would fail
99% of the time.
* mail-callbacks.c (run_filter_ondemand): Pass he new argument to the ever-mushrooming
filter_driver_run.
2000-08-17 Peter Williams <peterw@helixcode.com>
* folder-browser-factory.c (control_activate): Fix menu item names.
(register_ondemand): Put the ondemand hooks into the new folder menu.
2000-08-17 Ettore Perazzoli <ettore@helixcode.com>
* mail-vfolder.c (vfolder_gui_add_rule): Use stock OK/Cancel
buttons and add i18n support.
* folder-browser-factory.c (control_activate): Changed menu item
label from "Mark all messages seen" to "Mark All Messages as
Read". Changed capitalization of some other menu items.
(control_activate): Put the message- and folder- related menu
items in new "Message" and "Folder" subtrees which are created in
the `<Component Placeholder>' item created by the shell.
(control_deactivate): Updated accordingly.
(control_activate): Put the filter and vfolder editors, the mail
configuration and the "forget password" command into the
"settings" menu.
(control_deactivate): Updated accordingly.
* mail-config-gui.c (transport_page_new): Add translation mark.
(service_page_new): Show the menu items before appending them.
(service_page_item_new): Use `GTK_FILL' for the "Detect supported
types..." button.
* local-config.glade: Change the apply button into an ok button.
2000-08-17 Peter Williams <peterw@helixcode.com>
Implement filtering on demand.
* folder-browser-factory.c (register_ondemand): New function. Callback
to put the filter-on-demand filters into the bonobo UIH;
(create_ondemand_hooks): New function. Read in our on-demand filters
and hook them into the UI.
(remove_ondemand_hooks): New function. Remove the hooks when done with
them.
(control_activate): Call create_ondemand_hooks()
(control_deactivate): Call remove_ondemand_hooks();
* mail-callbacks.c (run_filter_ondemand): New function. Callback
for running a filter on demand.
(filter_edit): Pass NULLs as the new arguments to rule_context_load.
* mail.h: Prototype run_filter_ondemand();
* folder-browser.c (oc_destroy): New function. Iterator to destroy
an fb_ondemand_closure.
(folder_browser_destroy): Free the data associated with the ondemand
menu items.
(my_folder_browser_init): Clear the filter_ variables.
* folder-browser.h: Two new members of FolderBrowser: filter_menu_paths,
a list of fb_ondemand_closures so that the menu items can be freed and
removed; and filter_context, a permanently loaded FilterContext for
running the ondemand filters. Prototype the new fb_ondemand_closure
structure.
* mail-autofilter.c (filter_gui_add_from_message): Pass NULLs as the
new parameters to rule_context_load (we don't need to hook up ondemand
menu items...)
* mail-tools.c (mail_tool_filter_get_folder_func): Rename from
get_folder_func() and make public so mail-callbacks.c:run_filter_ondemand()
can use it too.
(mail_tool_filter_contents_into): Use the new name of get_folder_func.
Pass NULLs as the extra arguments to rule_context_load. Pass the
extra source type to filter_driver_run (only use INCOMING).
* mail-tools.h: Publicly prototype mail_tool_filter_get_folder_func()
* mail-vfolder.c (vfolder_create_storage): Pass NULLs as the extra
arguments to rule_context_load.
* message-list.c (message_list_init): Free our strdup'd uids when
the table model gets destroyed.
(nuke_uids): New function. Walk the tree nodes to free the uids.
(nuke_uids_cb): New callback for nuke_uids();
2000-08-16 Richard Hult <rhult@hem.passagen.se>
* mail-ops.c (cleanup_display_message): Use a configurable timeout.
* mail-config.c (mail_config_set_mark_as_seen_timeout): New function
for the settable mark-as-seen timeout.
(mail_config_mark_as_seen_timeout): Likewise.
(mail_config_write): Write the timeout setting.
(config_read): Read timeout setting.
* mail-config-gui.c (mail_config): Add option for the settable
mark-as-seen timeout.
(mail_config_apply_clicked): Likewise.
(timeout_changed): New function for the timeout setting.
2000-08-16 Peter Williams <peterw@helixcode.com>
* message-thread.c (walk_containers): More (default disabled)
mem debugging here. Fix the big leaks.
* mail-format.c (get_url_for_icon): Copy the url_path so that
it can't get freed under us.
* mail-threads.c (mail_operation_queue): Fix a leak.
* mail-ops.c (mail_do_display_message): Fix another leak.
* message-list.c (message_list_destroy): Remove the seen_id timeout
if necessary.
* mail-local.c (mail_tool_local_uri_to_folder): Fix a leak.
* session.c (auth_callback): Fix a leak. Almost seems as if
I've been using Purify...
2000-08-15 Peter Williams <peterw@helixcode.com>
* message-thread.c (alloc_container): Add support for debugging
container allocations -- currently disabled. Make sure that
the g_strfreev works.
* message-list.c (main_message_changed): Address bug #496 --
possible race when forwading a message_changed event.
* mail-threads.c (dispatch): Close the dispatch thread's half of
pipes when about to exit.
(mail_operations_terminate): Close the main thread's half of the
pipes when about to exit.
(all): Add i18n support.
* mail-tools.c (all): Add i18n support.
* mail-ops.c (transfer_messages): Generalize move_messages into
transfer_messages so that we can copy too.
(all): Add i18n supprt where appropriate.
* mail-ops.h: Prototype the new mail_do_transfer_messages.
* folder-browser-factory.c: Add a UI hook for copy_msg.
* mail-callbacks.c (transfer_msg): Generalize move so that it supports
copy as well, and add a callback 'copy_msg'.
* message-list.c (on_right_click): Add a right-click hook for Copy Message.
* session.c (mail_request_dialog): Don't deadlock when in main thread.
2000-08-14 Peter Williams <peterw@helixcode.com>
* mail-threads.c (show_error): Fix the error dialogs.
(read_msg): Re-enable them.
* mail-ops.c (do_scan_subfolders): Silence a compile warning.
2000-08-13 Jeffrey Stedfast <fejj@helixcode.com>
* mail-crypto.c (mail_crypto_openpgp_encrypt): Added support for
encrypting via PGP 5.0
2000-08-13 Ettore Perazzoli <ettore@helixcode.com>
* mail-ops.c (cleanup_create_folder): Release the listener object
with `CORBA_Object_release()', not `CORBA_free()'.
2000-08-13 Ettore Perazzoli <ettore@helixcode.com>
* main.c (main): Set the signal handlers for `SIGSEGV' and
`SIGBUS' to the default ones.
2000-08-13 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c (mail_config_write): Set config->configured to
TRUE
2000-08-13 Ettore Perazzoli <ettore@helixcode.com>
* mail-config-gui.c (mail_config_druid): Don't
`GDK_THREADS_ENTER()'/`GDK_THREADS_LEAVE()'.
2000-08-13 Ettore Perazzoli <ettore@helixcode.com>
* mail-threads.c (update_active_views): Just iterate through all
the controls, not just the active ones.
* folder-browser-factory.c: Don't keep track of active controls.
Rather, keep track of all of them.
(folder_browser_factory_get_active_control_list): Removed.
(folder_browser_factory_get_control_list): New.
2000-08-13 Dan Winship <danw@helixcode.com>
* Makefile.am (evolution_mail_SOURCES): add mail-local.h
2000-08-13 Ettore Perazzoli <ettore@helixcode.com>
* mail-threads.c (read_msg): For now, don't do anything about
errors.
2000-08-13 Dan Winship <danw@helixcode.com>
* mail-format.c (add_url): Fix some freed-memory references
* mail-threads.c (get_password): Don't free the prompt. It
doesn't belong to you.
2000-08-13 Ettore Perazzoli <ettore@helixcode.com>
* mail-ops.c (mail_do_create_folder): Duplicate the listener
object.
(cleanup_create_folder): Free the listener.
2000-08-13 Jeffrey Stedfast <fejj@helixcode.com>
* mail-threads.c (get_password): Don't wrap the gnome_dialog_run
in GDK_THREADS_ENTER/LEAVE
2000-08-13 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser-factory.c (control_destroy_cb): Remove the
control from the active control list, if it's there.
* mail.h (folder_browser_factory_new_control): Removed prototype.
(folder_browser_factory_init): Removed prototype.
* folder-browser-factory.h: New.
* folder-browser-factory.c: New static variable `active_controls',
list of the currently active controls.
(control_activate): Add the control to it.
(control_deactivate): Remove the control from it.
(folder_browser_factory_get_active_control_list): New.
* mail-threads.c (mail_operations_get_status): New function.
* folder-browser.c (folder_browser_gui_init): Add i18n support for
the labels.
[The following is actually from a patch by Peter Williams
<peterw@helixcode.com>.]
* Removed types `PERCENTAGE', `HIDE_PBAR', `SHOW_PBAR'. New
struct `block_info_s'. Removed all the code to create and destroy
the progress window.
2000-08-13 Jeffrey Stedfast <fejj@helixcode.com>
* component-factory.c (create_news_storage): Updated to reflect
changes to mail_do_scan_subfolders
(create_imap_storage): Same.
* mail-ops.c (mail_do_scan_subfolders): No longer takes an
add_INBOX argument
2000-08-13 Dan Winship <danw@helixcode.com>
* mail-ops.c (do_scan_subfolders): Lose a reference to the store
on purpose. To be fixed later.
2000-08-12 Dan Winship <danw@helixcode.com>
* component-factory.c (create_imap_storage): Take the source as a
command-line argument rather than fetching it from mail-config.
(owner_set_cb): Call create_imap_storage on each configured IMAP
store.
* mail-format.c (decode_pgp): Redo this so that the lock icon
remains active after a failed decryption so you can click on it
and try again.
(try_inline_pgp, handle_multipart_encrypted): Put a border around
the decrypted data.
* message-list.c (cleanup_regenerate_messagelist): Don't clear the
tree here. If two "folder_changed"s arrive in close succession,
then one possible ordering of events is
cleanup_regenerate_messagelist, cleanup_regenerate_messagelist,
cleanup_thread_messages, cleanup_thread_messages. Which would
result in the message list being filled in twice without being
cleared in between. So don't clear it until the rebuilding
function itself is called.
(clear_tree): New function to empty out the ETreeModel in the
message list.
(build_tree): Change to simpler interface. Call clear_tree.
(build_subtree): Does most of the work of the old build_tree
(build_flat): Remove unused arg. Call clear_tree.
* message-thread.c (cleanup_thread_messages): Update for
build_tree interface change.
* mail-ops.c (do_send_mail): Don't leak the transport.
* mail-tools.c (mail_tool_get_folder_from_urlname): Don't ref the
store returned from camel_session_get_store. It's already reffed.
(mail_tool_get_root_of_store): Ditto.
(mail_tool_send_via_transport): Remove some commented-out code and
fix it to not leave the transport connected if sending fails.
* mail-callbacks.c (delete_msg): Toggling a flag is an
"instantaneous" operation, so if we're only doing one, just do it
and return, rather than queueing it for the other thread. This
makes the "Delete" key work correctly (move to the next message)
again.
* mail-identify.c: Remove workaround for gnome-vfs 0.2 bug.
* mail-format.c (lookup_handler): Remove workaround for function
introduced between gnome-vfs 0.2 and 0.3, since we depend on 0.3
now.
2000-08-12 Michael Meeks <michael@helixcode.com>
* main.c (main): kill using_oaf assertion.
2000-08-11 Peter Williams <peterw@helixcode.com>
* Makefile.am: Make it so that test-mail links
2000-08-11 JP Rosevear <jpr@helixcode.com>
* folder-browser-factory.c (control_activate): Move menu items
that affect a single message together, ditto with ones that
affect multiple messages, put a separator in.
2000-08-11 Christopher James Lahey <clahey@helixcode.com>
* mail-format.c, mail-tools.h, message-list.c: Fixed a warning.
2000-08-11 Dan Winship <danw@helixcode.com>
* mail-display.c, mail-format.c: Redo this again. Get rid of
struct mail_format_data and move most of that info into
MailDisplay itself, and pass the MailDisplay around. Add a GData**
to MailDisplay, and put the urls hash table into that. Also add
the ability to redisplay the currently-displayed message (with the
same GData**), and add a "show_pgp" datum to it that controls
whether or not to decrypt PGP messages, and redo the PGP stuff
(again) to take that into account. Now you don't get the annoying
PGP password dialog box without any warning.
2000-08-11 Peter Williams <peterw@helixcode.com>
* mail-config-gui.c (service_acceptable): Make verify-service
an asynchronous operation.
* Makefile.am (noinst_PROGRAMS): Don't build test-thread
while mail-threads.c is in flux.
* mail-threads.c (mail_operation_queue): Make the error
and query dialogs modal.
* mail-local.c (update_progress): Don't use the
temporarily-disabled mail_op_set_percentage().
2000-08-11 Chris Toshok <toshok@helixcode.com>
* mail-config.c (mail_config_get_default_news): use config->news
instead of config->sources.
2000-08-11 Dan Winship <danw@helixcode.com>
* mail-format.c (destroy_part): Update this for CamelObject
(try_inline_pgp): Deal with decrypting here rather than trying to
pawn the data off to handle_multipart_encrypted, since it most
likely won't be correct (won't have the proper MIME headers inside
the encrypted part).
(handle_multipart_encrypted): Add code from Nathan Thompson-Amato
to re-MIME-parse the decrypted data after decrypting.
* mail-crypto.c (mail_crypto_openpgp_{de,en}crypt): Get the
password here rather than having it passed in. Remove some dead
code.
* session.c (mail_request_dialog): Allow this to work in either a
sync or an async context.
2000-08-11 Peter Williams <peterw@helixcode.com>
* mail-tools.c (mail_tool_fetch_mail_into_searchable): Don't
do the imap check here... it's a silly place.
* mail-ops.c (do_fetch_mail): Do the imap check here.
2000-08-11 JP Rosevear <jpr@helixcode.com>
* mail-config-gui.c (service_page_new): Work around
gtk option menu bug.
(service_page_item_auth_fill): ditto
2000-08-11 Peter Williams <peterw@helixcode.com>
* mail-threads.c (read_msg): Fix the new FORWARD_EVENT handler
(didn't free msg, didn't write newline in the debug)
* mail-local.c (local_reconfigure_folder): Make the dialog
modal.
* mail-callbacks.c (select_first_unread): Fix some warnings.
* mail-threads.c (mail_op_forward_event): New function that
writes a FORWARD_EVENT signal to the compipe, to allow Camel
events to be handled in the main thread.
(read_msg): Handle a FORWARD_EVENT.
* mail-callbacks.c (select_first_unread): Forward the
event into the main thread to prevent the GTK calls in the
dispatcher thread.
(main_select_first_unread): New name of old select_first_unread.
* message-list.c (folder_changed): Same as above.
(main_folder_changed): Same as above.
(message_changed): Same as above.
(main_message_changed): Same as above.
* mail-format.c (free_byte_array): Note about using
mail_op_forward_event. (cmm_destroyed): Same.
2000-08-11 Dan Winship <danw@helixcode.com>
* message-list.c (message_list_select): If the caller passes "-1"
for the model row, translate that to view row 0.
* message-list.c (idle_select_row):
* mail-callbacks.c (select_first_unread): Use new
message_list_select kludge^H^H^H^H^H^Hfeature
2000-08-11 JP Rosevear <jpr@helixcode.com>
* mail-config-gui.c (source_dialog): Allow the window
to be growable
* mail-config.c: use void in empty declarations
2000-08-11 Peter Williams <peterw@helixcode.com>
* mail-config.c (mail_config_get_news): Change () to (void)
if a function takes no arguments.
* mail-config.h: Prototype mail_config_get_{sources,news}x
2000-08-11 JP Rosevear <jpr@helixcode.com>
* mail-config-gui.c (identity_dialog): iddialog, not sdialog
(news_edit_clicked): Kill leftover c-p crud
2000-08-11 JP Rosevear <jpr@helixcode.com>
* mail-config-gui.c (news_edit_clicked): Check nrow, not srow.
2000-08-11 JP Rosevear <jpr@helixcode.com>
* mail-config-gui.c (service_acceptable): Use camel_object_unref
instead of gtk_object_unref
(mail_druid_finish): Use new config accessors
(mail_config_druid): No need to call config functions
(news_add_clicked): Increments maxnrow, not maxsrow
(mail_config_apply_clicked): Use new config accessors
(mail_config): ditto
* component-factory.c (create_imap_storage): Use new
config accessors
(create_news_storage): ditto
* mail-config.glade: Set news clist name correctly
* mail-config.c (config_read): Rename from mail_config_read and
made private - no one should need to do a read manually.
(mail_config_set_send_html): New accessor
(mail_config_add_identity): ditto
(mail_config_get_sources): ditto
(mail_config_add_source): ditto
(mail_config_get_default_news): ditto
(mail_config_get_news): ditto
(mail_config_add_news): ditto
* mail-config.h: Prototype new accessors. Config struct is now
in mail-config.c and hidden from the world.
2000-08-11 Dan Winship <danw@helixcode.com>
* mail-ops.c (describe_fetch_mail): Use camel_service_get_name
rather than showing the URL to the user.
2000-08-11 Peter Williams <peterw@helixcode.com>
* mail-ops.c (do_refile_messages): Freeze the folders while moving.
(do_flag_messages): Same.
* mail-threads.c (get_password_clicked): Fix the case when the
user /doesn't/ use escape to cancel the dialog :-/
(show_error_clicked): Same.
2000-08-11 Dan Winship <danw@helixcode.com>
* mail-tools.c (mail_tool_get_folder_name): Add a function to
return a useful name for a folder (not just "mbox" or "mh" for
any local folder.)
* mail-ops.c: Use mail_tool_get_folder_name rather than
folder->full_name when printing folder names.
2000-08-11 Not Zed <NotZed@HelixCode.com>
* mail-tools.c (mail_tool_get_local_inbox_url): Properly handle
different local file formats. The folder isn't always mbox.
(mail_tool_do_movemail): Movemail always uses an mbox format
however.
(mail_tool_get_local_movemail_url): What is the mbox url, it is
always the same type, mbox.
(mail_tool_fetch_mail_into_searchable): Same here.
* mail-local.c (mail_local_map_uri): Map a local uri to the real uri.
2000-08-10 Christopher James Lahey <clahey@helixcode.com>
* folder-browser-factory.c, message-list.c, message-thread.c,
session.c: Fixed some warnings.
2000-08-10 Dan Winship <danw@helixcode.com>
* session.c (session_init): Don't call e_setup_base_dir. It was
wrong and it doesn't exist any more.
* component-factory.c (owner_set_cb): Update for changed
prototype, and record the evolution_homedir. Move call to
mail_config_init here from session.c so it happens after
evolution_dir is initialized.
* mail.h: define "extern char *evolution_dir;" (formerly in
e-util/e-setup.h)
* component-factory.c, mail-callbacks.c, mail-config-gui.c,
mail-config.c, mail-display.c, mail-format.c, mail-ops.c,
mail-tools.c, session.c: Remove "e-util/e-setup.h" include.
2000-08-10 Peter Williams <peterw@helixcode.com>
* test-thread.c (queue_ops): Use mail_operations_terminate() to
close the other thread nicely.
* mail-threads.c (get_password_deleted): Handle the "close" event
as a cancel.
(show_error): Same.
2000-08-10 Dan Winship <danw@helixcode.com>
* mail-tools.c (mail_tool_get_folder_from_urlname): Add a
"gboolean create" argument to pass to camel_store_get_folder.
* mail-ops.c (do_create_folder, do_setup_draftbox):
* mail-local.c (mail_tool_local_uri_to_folder):
* mail-vfolder.c (vfolder_uri_to_folder): Add create flag to
mail_tool_get_folder_from_urlname calls.
2000-08-10 Jeffrey Stedfast <fejj@helixcode.com>
* mail-callbacks.c (composer_send_cb): Fix compile warning by
casting the object to a CamelObject
2000-08-10 Peter Williams <peterw@helixcode.com>
* mail-tools.c (mail_tool_filter_contents_into): Delete the source
folder if told to and if it's empty
(mail_tool_get_local_movemail_path): New function.
2000-08-10 Dan Winship <danw@helixcode.com>
* mail-callbacks.c (reply_to_all): Fix a bug in the async changes.
(This was identical to reply_to_sender.)
2000-08-10 Not Zed <NotZed@HelixCode.com>
* mail-local.c (do_local_reconfigure_folder): Update for
append_message api change.
* message-list.c (message_list_regenerate): Change for search api
change.
(ml_tree_value_at): Add a colour column, based on the colour
assigned in the summary.
(message_list_init_renderers): Init colour column.
2000-08-09 Peter Williams <peterw@helixcode.com>
* mail-display.c (part_for_url): Remove a gtk_object_get_data
2000-08-09 Cody Russell <bratsche@gnome.org>
* folder-browser-factory.c, mail-view.c: Make the toolbars
honor the user's gnomecc settings for detachable toolbars.
2000-08-09 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (composer_send_cb): Get the from address set in the
composer, if that fails ONLY THEN get the default from mail config
* mail-config.c (mail_config_get_identities): New convenience
function for getting a list of the configured identities
2000-08-09 Dan Winship <danw@helixcode.com>
* mail-display.c (on_object_requested): Support controls as well
as embeddables.
2000-08-09 Jeffrey Stedfast <fejj@helixcode.com>
* mail-view.c (mail_view_create): Changed to only take a
FolderBrowser argument
* mail-ops.c (real_view_msg): Create a new FolderBrowser for each
message being opened in a new window. Also set the
message_list->cursor_uid and mail_display->current_message to the
appropriate values.
(real_view_msg): Updated to reflect changes in the mail_view_create
* message-list.c (on_right_click): Nicify a little, add in a menu
separator between VFolder and Filter stuff.
* mail-ops.c (real_view_msg): Set the UID of the message that is
being displayed
2000-08-09 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser-factory.c (control_activate): Use
`GNOME_STOCK_MENU_*' things instead of `GNOME_STOCK_PIXMAP_*'
things, that are too big and look bad.
2000-08-09 Peter Williams <peterw@helixcode.com>
* mail-view.c (mail_view_create): Save the top window so that on_close
can find it [with set_data].
(on_close): Recover the top window.
* mail-threads.c (read_msg): Destroy the window instead of hiding it.
2000-08-09 Not Zed <NotZed@HelixCode.com>
* mail-autofilter.c (filter_gui_add_from_message): Helper function
to add with confirm.
(rule_match_recipients): Dont set real name if its empty for the
filter name.
(rule_match_subject): was cutting ] off mailing list names.
* message-list.c (on_right_click): Added menu to install
vfolders/filters from message.
2000-08-09 Not Zed <NotZed@HelixCode.com>
* mail-autofilter.c: New file to hold auto filter/vfolder stuff.
2000-08-09 Christopher James Lahey <clahey@helixcode.com>
* mail-display.c, mail-format.c, mail-ops.c: Fixed some warnings.
* message-list.c: Fix the call to e_popup_menu_run to match the
new signature.
2000-08-09 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser-factory.c (control_activate): Create a "print
message" menu item.
2000-08-09 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (message_list_init): Attached a double_click
signal handler
(on_double_click): Our lovely new double_click callback. Will
display the current selected message in a new window
2000-08-08 Jeremy Wise <jwise@pathwaynet.com>
* mail-config.[ch], folder-browser.c: Added configuration work to
save the size of the vpaned widget. It will be functional when the
e_paned widget emits a "resized" signal
2000-08-08 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.h: Added void as an argument to functions not
needing any parameters to avoid compile warnings.
2000-08-08 Jeremy Wise <jwise@pathwaynet.com>
* mail-config.[ch], main.c, folder-browser-factory.c: State of the
threaded list toggle is now saved via gnome_config
2000-08-08 Dan Winship <danw@helixcode.com>
* mail-config-gui.c (service_page_item_new): Attach a signal
handler to call the "changed" function when the user clicks the
"keep on server" checkbox.
2000-08-08 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (view_msg): New convenience function with params of a
normal Gtk callback function. We also now create a new
FolderBrowser object so that the message-view window isn't tied to
the display in the main window
(view_message): Now calls view_msg (this function is a bonobo
callback and can't be used with gtk widgets)
(edit_msg): Same idea as view_msg()
(edit_message): Again, same as view_message()
* message-list.c (on_right_click): Callback for creating an
e-popup-menu
(message_list_init): Added a right_click event to trigger a pop-up
menu to be displayed
2000-08-08 Dan Winship <danw@helixcode.com>
* mail-config-gui.c: Add "Don't delete messages from server"
button to remote SOURCEs that aren't STORAGEs (ie, POP).
(provider_list): Only list SOURCEs. (ie, not mh)
* mail-config.c: Save/load "keep_on_server" flag.
* mail-ops.c (fetch_remote_mail): New function, split out of
real_fetch_mail. Deals with copying mail from a remote server into
a temporary mbox, possibly using a CamelUIDCache to leave the
messages on the server.
* mail-crypto.c, mail-format.c, message-thread.c: Fix some
compiler warnings.
* mail-format.c (mail_generate_reply): Fix up format of addresses.
(write_headers): Use CamelAddress functions to simplify this.
2000-08-08 Jeffrey Stedfast <fejj@helixcode.com>
* mail-view.c: Lets get rid of the last separator in the toolbar
until we add n/p
2000-08-08 Ettore Perazzoli <ettore@helixcode.com>
* mail-threads.c (queue_window_delete_event_cb): Callback for
"delete_event", just doing nothing.
(create_queue_window): Connect it to the "delete_event" signal of
the progress dialog.
2000-08-08 Peter Williams <peterw@helixcode.com>
* mail-threads.c (remove_next_pending): Sanity check for
job queue, which seems to have some issues.
(read_msg): Make sure that the next operation isn't started
before the last one is cleaned up.
* mail-callbacks.c (fetch_mail): Fix erroneous free.
* mail-config-gui.c (mail_config_druid): Wrap the gtk_main call.
* mail-ops.c (do_flag_messages): Allow specification of whether
to set the flags unconditionally or toggle their current state.
* message-list.c (ml_tree_set_value_at): Toggle the seen status;
don't set it unconditionally.
* mail-callbacks.c (delete_msg): Toggle the deletion status;
don't set it unconditionally.
* mail-tools.c (mail_tool_do_movemail): Fix for undeclared tmpfd.
* mail-local.c (local_reconfigure_folder): Big rewrite; make into
an asynchronous operation. Use some mail tools to make life easy.
2000-08-08 Dan Winship <danw@helixcode.com>
* main.c (main): Move mail_config_init after session_init, since
it depends on evolution_dir being set.
2000-08-08 JP Rosevear <jpr@helixcode.com>
* mail-ops.c (check_configured): Use config accessors
(fetch_mail): ditto
(composer_send_cb): ditto
(create_msg_composer): ditto
* mail-config-gui.h: Update API
* mail-config.h: Update API
* mail-config.c: Add accessor functions
(mail_config_is_configured): accessor function
(mail_config_get_default_identity): ditto
(mail_config_get_default_source): ditto
(mail_config_get_transport): ditto
(mail_config_send_html): ditto
(identity_copy): Make public
(identity_destroy): ditto
(identity_destroy_each): ditto
(service_copy): ditto
(service_destroy): ditto
(service_destroy_each): ditto
(mail_config_init): Rename from init_config and make public
(mail_config_clear): Rename from clear_config and make public
(mail_config_read): Rename from read_config and make public
(mail_config_write): Reanme from write_config and make public
* main.c (main): Call mail_config_init.
* mail.h: Include mail-config-gui.h
* mail-config-gui.c: Move config gui stuff here.
(source_dialog): Kill memory leak from debug leftovers.
Make sure returned source is NULL by default
2000-08-07 Not Zed <NotZed@HelixCode.com>
* mail-local.c (local_reconfigure_folder): Redone to show a
dialogue first, and show progress of whats happening as its done.
* Makefile.am (glade_DATA): Added local-config.glade, for mailbox
reconfig dialogue.
2000-08-04 Not Zed <NotZed@HelixCode.com>
* folder-browser.c (mail_uri_to_folder): Use local_uri_to_folder()
for local uri's (file://).
* mail-local.c (local_uri_to_folder): Handle looking up folder
storage type before opening the store/folder.
(local_reconfigure_folder): Function to reconfigure the format of
a local mailbox into another storage format.
* Makefile.am (evolution_mail_SOURCES): Added mail-local.c and
missing mail-vfolder.h.
2000-08-07 Jeffrey Stedfast <fejj@helixcode.com>
* Makefile.am: Added mail-view.c
* folder-browser-factory.c (control_activate): Adda menu item for
viewing the message
* mail-view.c: New file containing methods for viewing messages in
separate windows
* mail-ops.c (view_message): New callback for viewing messages in
a new window.
2000-08-07 Jeffrey Stedfast <fejj@helixcode.com>
* component-factory.c (real_create_generic_storage): New function
to replace real_create_imap_storage and real_create_news_storage
(create_imap_storage): Updated.
(create_news_storage): Updated.
2000-08-07 Peter Williams <peterw@helixcode.com>
* mail-ops.c (cleanup_edit_messages): New operation: edit_messages
For continuing draft messages.
(attach_messages): Fix accidental 0 datasize.
(do_setup_draftbox): New operation: setup_draftbox. Soooo hacky.
* mail-callbacks.c: Move fejj's edit message to the async home.
* component-factory.c (owner_set_cb): Use mail_do_setup_draftbox.
2000-08-07 Jeffrey Stedfast <fejj@helixcode.com>
* mail-display.c:
* component-factory.c: s/strncasecmp/g_strncasecmp
* mail-format.c (write_headers): Get rid of kludge around subject
beginning with spaces.
(mail_generate_reply): Get rid of kludge around subject beginning
with spaces and also use g_strncasecmp instead of strncasecmp for
portability
* mail-ops.c (forward_msg): Get rid of kludges around subject
beginning with spaces.
2000-08-07 Dan Winship <danw@helixcode.com>
* message-list.c (message_list_select): Clarify that the input row
is a model row, and swap it to a view row when finding the
next/previous row.
(idle_select_row): Select view row 0, not model row 0.
* mail-ops.c (select_first_unread): Start from view row 0, not
model row 0.
2000-08-07 Jeffrey Stedfast <fejj@helixcode.com>
* mail-format.c (mail_get_message_body): Renamed from reply_body()
so other functions can use it
(mail_generate_reply): Updated to reflect function name changes
* mail-ops.c (real_edit_msg): Attach a callback to the send signal
2000-08-07 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c (control_activate): New menu item under
Actions to allow editing of messages.
* mail-ops.c (edit_message): New function for editing messages.
* component-factory.c (owner_set_cb): Create a global reference to
the Drafts mbox folder for the Composer to use
2000-08-06 JP Rosevear <jpr@helixcode.com>
* mail-config.c (ndialog_page_undone): Desensitize ok button
(sdialog_page_undone): ditto
(iddialog_page_undone): ditto
(news_page_new): Typo - news, not mail
(transport_page_new): Typo - transport, not source
(identity_dialog): Set undone callback
(source_dialog): ditto
(news_dialog): ditto
(mail_druid_identity_undone): Desensitize next button and
mark done flag as false
(mail_druid_source_undone): ditto
(mail_druid_transport_undone): ditto
(mail_druid_identity_done): Mark done flag as true
(mail_druid_source_done): ditto
(mail_druid_transport_done): ditto
(mail_druid_prepare): Use done flag to set next button
sensitivity, fixes #467
2000-08-06 Jeffrey Stedfast <fejj@helixcode.com>
* mail-crypto.c (mail_crypto_openpgp_encrypt): Added support for
encrypting with GnuPG. Support for PGP5 and PGP2 are still in
progress.
2000-08-05 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c (control_activate): Remove bonobo 0.15
vs 0.15-and-a-half ifdef, since we require post-0.16 now.
2000-08-04 Dan Winship <danw@helixcode.com>
* mail-threads.c (mail_operation_wait_for_finish): Don't use
"while (gtk_events_pending ()) gtk_main_iteration ();" inside
another tight loop, because it makes the thread spin rather than
blocking and waiting like it should.
2000-08-04 Peter Williams <peterw@helixcode.com>
* message-thread.c (do_thread_messages): Uninitialized variable
fix.
* mail-threads.c (read_msg): Small leak fix.
* component-factory.c (owner_unset_cb): Use mail_operations_
terminate() instead of wait_for_finish().
* mail-threads.c (mail_operation_queue): Centralize the clur
handling functions; fix a race condition where the dispatcher
would overwrite the closure before the main thread could
free the old one.
(mail_operations_terminate): New function, wait for ops to
finished and kill the other thread.
(dispatch): changes to die when terminate is called (abort
on NULL spec).
* mail-ops.c (cleanup_display_message): Fix improper handling
of displaying a NULL message (which means clear the message
display).
2000-08-04 Ettore Perazzoli <ettore@helixcode.com>
* message-list.c (message_list_regenerate): Free the GPtrArray
correctly instead of using `g_strfreev()'.
2000-08-04 Michael Meeks <michael@helixcode.com>
* folder-browser-factory.c (control_activate): release the ui_handler
after set_container.
2000-08-03 Michael Meeks <michael@helixcode.com>
* mail-config.c (identity_page_new): only whack the sig in if the
file exists.
* component-factory.c (factory_fn): count running instances,
attach destroy signal (factory_destroy): add.
* main.c (main): pass orb around.
2000-08-03 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (composer_send_cb): Yay, no more compiler warnings
* mail-config.c: set config = NULL
(provider_list) Eek! Initialize news to NULL! Also, use
g_slist_prepend() for "performance" gains ;-)
(init_config): Set the config member data to NULL just to be on
the safe side
(clear_config): Don't bother freeing slist data if the slist is
NULL
2000-08-03 Peter Williams <peterw@helixcode.com>
* mail-ops.c (op_forward_messages): Use the new dynamic
operation naming.
* message-thread.c (describe_thread_messages): Ditto.
* message-list.c (describe_regenerate_messagelist): Ditto.
* mail-threads.c (get_password_clicked): Dynamic generation
of descriptive text for mail operations. "Opening a folder" ->
"Opening INBOX". Supported only so far, will be implemented
quickly.
g_strdup() the old_message when changing the queue_window_label's
text.
* main.c (main): One more gconf reference to take out...
* mail-ops.c (composer_send_cb): Check for an identity before
sending.
2000-08-03 JP Rosevear <jpr@helixcode.com>
* mail-config.glade: Increase window size slightly, rename
"Transport" to "Mail Transport"
* mail-config.c (init_config): Remove gconf references
(clear_config): ditto
(read_config): ditto
(write_config): ditto
(mail_config): Null provider lists before filling them
(mail_config_druid): ditto
(identity_page_new): Increase spacing of vbox
(service_page_new): ditto
* Makefile.am: Remove gconf references.
2000-08-02 Dan Winship <danw@helixcode.com>
* mail-config.c (service_page_item_new): Make the "test settings"
button FILL rather than SHRINK so it doesn't end up oddly-placed.
* mail-config-druid.glade: Make the icon background dark blue
like the surrounding area.
2000-08-02 Peter Williams <peterw@helixcode.com>
* component-factory.c (owner_unset_cb): Wait for async operations
to finish before exiting.
2000-08-02 Christopher James Lahey <clahey@helixcode.com>
* mail-ops.c, message-list.c: Emit "model_pre_change" where
appropriate.
2000-08-02 Peter Williams <peterw@helixcode.com>
* mail-config.h: #ifdef _MAIL_CONFIG_H protect the header.
2000-08-01 Peter Williams <peterw@helixcode.com>
* mail-threads.c: Implement Solaris threads. Attempt
to join to the thread upon exit -- hopefully prevents
all those nasty zombie processes from popping up :-(
2000-08-01 Dan Winship <danw@helixcode.com>
* mail-crypto.c: New code to spawn off GPG/PGP to do stuff.
Currently only deals with decryption. From Nathan Thompson-Amato
<ndt@jps.net>, with bunches of changes from me.
* session.c (mail_request_dialog): Expose the password dialog to
the rest of the app (for use by the GPG/PGP code).
* mail-format.c (handle_text_plain): Handle special inline data
types. (Currently uuencoding, BinHex, and PGP encryption.) This is
not the best way to deal with it, but it works for now.
(try_inline_pgp): Convert an inline PGP-encrypted message into a
multipart/encrypted part.
(try_inline_binhex): Convert an inline BinHex attachment into an
application/mac-binhex40 part (which we currently don't deal
with...)
(try_uudecoding): Convert a uuencoded attachment to an
application/octet-stream part.
(handle_multipart_encrypted): Deal with RFC2015 MIME-encoded PGP
encrypted messages. (From ndt.)
* mail-display.c (mail_text_write, mail_error_write): New utility
functions.
* Makefile.am (evolution_mail_SOURCES): add mail-crypto.c
2000-07-31 Christopher James Lahey <clahey@helixcode.com>
* component-factory.c, folder-browser.c: Fixed some warnings.
* message-list.c: Made the icon column non sortable.
2000-07-31 Dan Winship <danw@helixcode.com>
* mail-config.c (service_page_set_url): Fix a NULL-pointer strcmp
noticed by peterw.
2000-07-31 Not Zed <NotZed@HelixCode.com>
* mail-vfolder.h: Header for vfolder functions.
* folder-browser.c (mail_uri_to_folder): Use new scheme to open
vfolders.
(search_save): New button/function to save a search as a vfolder.
* mail-vfolder.c (vfolder_edit): Made asynchronous.
(vfolder_uri_to_folder): New function for loading vfolders and
setting up their source folders.
(vfolder_refresh): Change shell vfolder uri's to indirect
references rather than the real vfolder uri.
(vfolder_gui_add_rule): Add a rule with user confirmation.
(vfolder_create_part): Get a new part by name, for creating rules
in code.
* message-thread.c (thread_messages): Check for uid lookup
failure, which indicates an error in the folder or calling code.
2000-07-29 Not Zed <NotZed@HelixCode.com>
* component-factory.c (create_view): Remove hack to pass the
storage around.
* folder-browser-factory.c (control_activate): Changed to call
renamed vfolder editor.
* mail-ops.c (vfolder_edit_vfolders): renamed from vfolder_edit,
call new edit function.
(vfolder_editor_clicked): Removed.
(filter_druid_clicked):
(filter_edit): Updated for api change.
(real_fetch_mail): Fixed up for api change and fucked up indent.
(filter_get_folder): callback for filter driver.
* mail-vfolder.c: New file to manage virtual folders.
2000-07-29 JP Rosevear <jpr@helixcode.com>
* mail-format.c (mail_generate_reply): Use new mail config stuff
* component-factory.c (create_imap_storage): Use new mail config
stuff
(create_news_storage): ditto
* evolution-mail.schemas: Gconf schema for evolution mail
* mail-config-druid.glade: Gladification of config druid
* mail-config.h: New header with config structs.
* mail-config.c: Rewrite of GUI configuration tools to use
new config structs. Stores multiple identities and sources now.
Still only uses the first one found.
(mail_config_fetch): Returns MailConfig struct to caller
for configuration queries.
(mail_config): Renamed function to show mail config dialog.
(mail_config_druid): Renamed function to show mail config druid.
* mail-ops.c (create_msg_composer): Use
e_msg_composer_new_with_sig_file and new config stuff
(check_configured): Use new config stuff
(fetch_mail): ditto
(composer_send_cb): ditto
2000-07-28 Cody Russell <bratsche@gnome.org>
* mail-ops.c, mail.h: Added mark_all_seen(), to mark every
message in the list with CAMEL_MESSAGE_SEEN.
* folder-browser-factory.c: Added "Actions/Mark all seen".
2000-07-27 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c: Lets fix Dan's kludge the Right Way (tm)
(set_service_url): Only strip off the leading "/" from the
url->path if url->host is NULL
(get_service_url): Only prepend a leading "/" to the path if the
host is NULL
2000-07-27 Dan Winship <danw@helixcode.com>
* mail-config.c (get_service_url): toss in a kludge to deal with
the IMAP vs mbox path problem for now.
2000-07-26 Christopher James Lahey <clahey@helixcode.com>
* message-list.c, message-list.h: Removed counting of selected
messages.
2000-07-26 Dan Winship <danw@helixcode.com>
* mail-ops.c (real_fetch_mail): Don't create the tmp_mbox before
calling movemail, because the external movemail requires it to not
exist. Contrariwise, delete it in the cleanup code if it's empty.
Update for camel_movemail interface change. Do the "No new
messages" dialog in the mbox case as well as the remote mail
issue.
2000-07-26 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c: s/struct refile_data/struct move_data
(real_move_msg): Renamed from real_refile_msg()
(move_msg): Renamed from refile_msg()
* folder-browser-factory.c: Changed Refile to Move.
2000-07-26 Dan Winship <danw@helixcode.com>
* mail-format.c (lookup_handler): Update for OAF and for external
apps as well as components.
(handle_via_external): Handler to set up for data that can be
displayed by an external application.
* mail-display.c (on_link_clicked, etc): Refactor the save_data()
code and add launch_external() as a handler for
x-evolution-external URLs.
(embeddable_destroy_cb): Remove this, since it seems like it's all
wrong.
(on_object_requested): Update for OAF, and fix some bugs.
2000-07-25 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c (get_service_url): Always prepend a leading "/" to
the url->path.
(set_service_url): Added more error checking and also strip the
leading '/' from the url->path
(create_identity_page): Set the signature file to the one specified in
the identity record, else set the default path to ~/.sugnature
2000-07-25 Michael Meeks <michael@helixcode.com>
* mail-config.c (create_identity_page): set default signature to
~/.signature
2000-07-25 Peter Williams <peterw@helixcode.com>
* mail-ops.c (reply): Check for the case of fb->mail_display->
current_message = NULL, which shouldn't happen, but has happened
to me.
2000-07-25 Dan Winship <danw@helixcode.com>
* message-thread.c (group_root_set): Don't group together messages
with the same non-Re: subject and no References/In-Reply-To. More
often than not, they're unrelated. (eg, "[No subject]".)
(thread_messages): Handle messages with no Message-Id. "This
shouldn't happen", but it does sometimes, and it's not much code
to make it just work.
2000-07-25 Ettore Perazzoli <ettore@helixcode.com>
* mail-config.c (create_service_page): Call
`gtk_option_menu_set_menu()' as the last thing, as `GtkOptionMenu'
is fscking broken. Also, `gtk_widget_show()' the individual menu
items.
2000-07-24 Dan Winship <danw@helixcode.com>
* message-list.c (mark_msg_seen, ml_tree_set_value_at,
message_list_regenerate): Update for CamelFolder API changes.
(Certain functions no longer take a CamelException.)
* mail-ops.c (real_fetch_mail, real_send_mail, real_delete_msg):
ditto
* component-factory.c (real_create_imap_storage,
real_create_news_storage): ditto
2000-07-24 Dan Winship <danw@helixcode.com>
* component-factory.c, folder-browser-factory.c, test-mail.c:
Remove GOAD support.
* main.c: Remove GOAD support.
(main): More "guess the build mistake" fun, this time for the
failure to initialize Bonobo case.
2000-07-24 Peter Williams <peterw@helixcode.com>
* mail-tools.c (mail_tool_set_uid_flags): Change
function to faithfully pass parameters to
camel_folder_set_message_flags; this function is
somewhat useless now. Other files synced with
API change.
* mail-ops.c (op_display_message): Change "display
a message" into "retrieve a messsage" in the
description of mail_op_display_message.
* mail-threads.c (display_timeout): New function.
Only display the progress dialog if the operation
takes more than a second to perform.
(hide_queue_window): New function. Hide the queue
window as an idle function... I'm thinking maybe
the problem with hiding it was due to us not
being in a GTK event sequence? Perhaps it's only
the timeout, which was not being cancelled, which
is now.
* message-list.c (get_message_uid): New function,
copy of get_message_info, except gets only the
UID, as that's all that most functions want, and
we avoid a Camel call.
2000-07-23 Ettore Perazzoli <ettore@helixcode.com>
* mail-ops.c (create_message_composer): New.
(compose_msg): Use it.
(send_to_url): Likewise.
(forward_msg): Likewise.
* folder-browser-factory.c (control_activate): Use `_()' instead
of `N_()'.
2000-07-21 Peter Williams <peterw@helixcode.com>
* message-thread.c (setup_thread_messages): New
operation: thread_messages, simple wrapper around
thread_messages () and thread_messages_free();
* message-list.c (cleanup_regenerate_messagelist):
Use new thread_messages operation instead of just
calling ... thread_messages :-)
* folder-browser.c (folder_browser_destroy): Use new
sync_folder operation instead of calling camel_folder_sync
directly.
* component-factory.c (create_folder): Changed to use
new create_folder operation.
* mail-ops.c (mail_do_create_folder): New operation: create
folder. New operation: sync folder.
* mail-format.c (cmm_destroyed): Remove the url hashtable from
the larger hashtable when it gets destroyed.
* mail-callbacks.c (fetch_mail): Pass a hook function and data
down the chain to pick up the folder_changed and change the view.
* mail-ops.c: Rename from mail-ops-new.c now that it's a little more
solid.
(fetch_mail): Add new options to hook and unhook an event while the
filter driver runs. A hack, but all of the operations are to some
extent.
(cleanup_fetch_mail): Unref the destination folder if not NULL.
* mail-tools.c (mail_tool_filter_contents_into): Intermediate the
event hook/unhook hack here.
2000-07-20 Peter Williams <peterw@helixcode.com>
* mail-ops-new.c (setup_send_mail): Fix silly forgetting-to-ref
problem on some sends (when not replying). Note the early exit
path with a big comment.
* message-list.c (message_list_set_folder): Don't call
folder_changed, call mail_do_regenerate_messagelist, as
the GDK_THREADS_ENTER in the former can deadlock us!
* folder-browser.c (folder_browser_set_uri): Ah, screw it.
Make 'load folder' asynchronous and pretend that it always
succeeds.
* mail-ops-new.c (mail_do_load_folder): New operation, loads
a folder into a FolderBrowser.
* mail-threads.c (read_msg): Check if the exception is
a user cancel; don't complain if it is.
(mail_operation_queue): Same.
(dispatch_func): Same.
2000-07-20 Peter Williams <peterw@helixcode.com>
* mail-ops-new.c (cleanup_send_mail): Fix evil mistaken
unref.
* test-thread.c: Fit the new mail_operation_spec prototype.
* mail-callbacks.c (composer_send_cb): Hide the composer upon
start of send operation.
* folder-browser.c: #include "mail-ops-new.h"
* mail-threads.h: Change text fields of mail_operation_spec to
provide two forms of the name.
* mail-threads.c: Use appropriate new string fields.
(dispatch_func): Hide the progressbar by default.
* message-list.c (op_regenerate_messagelist): Fix the datasize from
0 -> sizeof (regenerate_messagelist_data_t). Add the new gerund and
infinitive strings.
(do_regenerate_messagelist): Include some code that fell between the
cracks.
* mail-ops-new.c (op_scan_subfolders): Same datasize fix for
scan_subfolders.
(op_forward_message): Same.
(all): Add new gerund and inifinitive strings for mail_operation_spec.
(cleanup_send_mail): Destroy the composer on success; re-show it on
error. I'm so clever!
2000-07-20 Ettore Perazzoli <ettore@helixcode.com>
* component-factory.c (factory_fn): Updated for the new
`evolution_shell_component_new()' arg.
2000-07-19 Jeffrey Stedfast <fejj@helixcode.com>
* message-thread.c (thread_messages): What if message info is NULL?
2000-07-17 Peter Williams <peterw@helixcode.com>
* component-factory.c (real_create_{imap,news}_storage): Instead of
directly calling evolution_storage_new_folder, queue up a list of
folders to register so that we don't do our CORBA in The Other Thread.
(create_{imap,news}_storage): Changes ancillary to the above.
(add_new_mailbox): New function to queue up a folder
(cleanup_create_info): New function to dequeue the folders and free mem.
* test-thread.c: s,ENABLE_BROKEN_THREADS,USE_BROKEN_THREADS -- oops
* mail-format.c: (mail_lookup_url_table): New function to get the url
table associated with a CamelMimeMessage because we can no longer
gtk_object_get_data on it.
* mail-display.c: replace 'gtk_object_get_data( message, "urls" )'
with 'mail_lookup_url_table( message )'
2000-07-16 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c, component-factory.c: Initial code to support
IMAP folders that don't use "/" as a directory separator.
2000-07-15 Ettore Perazzoli <ettore@helixcode.com>
* mail-ops.c (set_x_mailer_header): New helper function to set the
`X-Mailer:' header to to `Evolution <version> [Developer
Preview]".
(real_send_mail): Call it.
2000-07-14 Peter Williams <peterw@curious-george.helixcode.com>
* message-list.c (message_list_set_folder): Ported to CamelObject:
GTK_OBJECT->CAMEL_OBJECT; gtk_signal_connect->camel_object_hook_event;
GDK_THREADS_ENTER/LEAVE around "changed" event hooks.
* folder-browser.c (folder_browser_destroy): likewise.
(mail_uri_to_folder): likewise.
(folder_browser_load_folder): likewise.
2000-07-14 Ettore Perazzoli <ettore@helixcode.com>
* Makefile.am (evolution_mail_LDADD): Add `GCONF_LIBS'.
2000-07-14 Dan Winship <danw@helixcode.com>
* mail-format.c (write_headers): put a <p> at the end of the
header table. (I think there used to be whitespace after it, but
then some gtkhtml change got rid of it...)
(handle_text_plain): Don't do this <PRE>. Instead, CONVERT_NL and
CONVERT_SPACES and wrap it in <TT>. Now if the sender didn't
include any newlines, it will be wrapped to the width of the
window instead of extending off into infinity.
2000-07-13 Dan Winship <danw@helixcode.com>
* message-list.c (message_list_destroy): Only unref the folder if
it's been set.
* folder-browser.c (folder_browser_destroy): Only sync the folder
if it's been set.
2000-07-13 Jonathan Blandford <jrb@redhat.com>
* mail-config.c (create_transport):
s/CAMEL_SERVICE_NEED_HOST/CAMEL_SERVICE_URL_NEED_HOST.
2000-07-13 Dan Winship <danw@helixcode.com>
* mail-config.c (add_row): Add a "gboolean required" argument, and
set its value on the entry.
(create_source, create_transport): Create rows for URL elements if
the URL ALLOWs them. Mark them required if it NEEDs them.
(service_note_doneness): Only require the required fields to be
filled in.
Now the IMAP config page allows the user to enter a path, but
doesn't require it.
2000-07-13 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (real_fetch_mail): Back to the old way to avoid
g_warnings, yay. Also fix append to send a flags argument (0)
2000-07-12 Chris Toshok <toshok@helixcode.com>
* mail-config.c (providers_config_new): fix some cut & paste bung.
2000-07-12 Chris Toshok <toshok@helixcode.com>
* mail-format.c (setup_function_table): add "message/news" to the
mime_function_table using the same handler as message/rfc822.
2000-07-12 Chris Toshok <toshok@helixcode.com>
* mail-config.glade*: add news server tab to dialog.
* mail-config.c (on_NewsServerConfigDialogButton_clicked): new function.
(on_clistNewsServers_select_row): new function.
(on_cmdNewsServersAdd_clicked): new function.
(on_cmdNewsServersEdit_clicked): new function.
(on_cmdNewsServersDelete_clicked): new function.
(providers_config_new): mirror the source tab's code to fill in
the news server tab.
(write_config): save out the news server.
(create_news_server_config_dialog): new function.
(create_news_server_page): new function.
2000-07-12 Peter Williams <peterw@helixcode.com>
* mail-display.c (save_data): Change from evolution_dir to
g_get_home_dir() for default location of save file.
2000-07-11 Dan Winship <danw@helixcode.com>
* Update for CamelFolder API changes
2000-07-11 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (real_fetch_mail): Changed to use
camel_folder_move_message_to () rather than get_message () and then
append_message (). This also makes it so we don't have to worry about
fetching message flags to pass to the new append_message () method.
* folder-browser.c (folder_browser_load_folder): Disable
Search capability menu/entry if folder doesn't support it.
* message-list.c (message_list_regenerate): Don't perform
a search if the folder doesn't support it.
2000-07-11 Dan Winship <danw@helixcode.com>
* mail-ops.c (real_send_mail): Set the post_send_data flag rather
than toggling it. (Maybe we'll need more control over it later,
but for now, the only flag we set is "replied", and we want
that set, not toggled.)
2000-07-10 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c (control_activate): Work with both
current and 0.15 bonobo
* kill more debugging messages
* mail-ops.c (real_fetch_mail): Don't multiply free dest_url.
* message-list.c (message_list_select): Update
message_list_select_next to do either next or previous.
* folder-browser.c (etable_key): Make 'n' and 'p' do next and
previous unread message.
* mail-ops.c (select_first_unread): Update.
(real_fetch_mail): clean up a bit.
2000-07-10 Ettore Perazzoli <ettore@helixcode.com>
* mail-ops.c (forward_msg): Initialize `fwd_subj' to NULL if
`from' is NULL.
2000-07-10 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (real_fetch_mail): Fixed broken POP fetching
2000-07-10 Ettore Perazzoli <ettore@helixcode.com>
* component-factory.c: Removed variable `browsers'.
(create_view): Don't update it.
(owner_unset_cb): Don't sync the folders here anymore, because at
this point the folder browser is dead already so we cannot get a
valid list of folders from it anymore.
* folder-browser.c (folder_browser_destroy): Sync the associated
mailbox first.
2000-07-10 Christopher James Lahey <clahey@helixcode.com>
* message-list.c, message-list.h: Switched from ETable to
ETableScrolled.
2000-07-10 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (real_fetch_mail): Fixed movemail so that it too would
deliver to Inbox.
2000-07-09 Dan Winship <danw@helixcode.com>
* message-list.c (get_message_info): Don't g_warn if the user
selects a fake tree parent.
(message_list_select_next): Ignore fake rows
(build_tree): Store the "root_subject" for fake rows
(ml_tree_value_at): Display the correct subject for fake rows.
(on_cursor_change_cmd): Update for the other changes and set
cursor_uid to NULL when the cursor is on a fake row.
* mail-ops.c (reply): Don't try to reply when no (real) message is
selected.
(forward_msg): Ditto.
2000-07-09 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Remove setting of dnd_code since that's handled
internally to ETable.
2000-07-08 Dan Winship <danw@helixcode.com>
* folder-browser.c (etable_key): Fix up the pageup/pagedown
increment a bit.
* folder-browser-factory.c (control_activate): Add a "Threaded
Message List" item to the "View" menu.
* message-list.c (message_list_toggle_threads): Handler for that.
(build_flat): New function to build a "flat" message list using
the tree model.
(message_list_regenerate): Build tree or flat message list
depending on the global setting.
* message-thread.c (get_root_subject): fix a "Re:" parsing bug
2000-07-08 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (real_fetch_mail): Always dump incoming messages to
Inbox (assuming not filtered to another location).
2000-07-08 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser-factory.c (control_activate): Move the
"Expunge" item to the "Action" menu.
(control_deactivate): Accordingly.
2000-07-08 Dan Winship <danw@helixcode.com>
* mail-ops.c (forward_msg): Deal with having multiple selected
messages.
* mail-format.c (mail_generate_forward): Removed. (Integrated into
forward_msg)
2000-07-08 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (build_tree): Small fix to stop uid data from
being set on a message-list tree node when it didn't correspond
to an actual message.
2000-07-08 Dan Winship <danw@helixcode.com>
* message-list.c (get_message_info): Fix Jeff's FIXME: This does
get called with out-of-range data sometimes, so we do need the
check. Use e_table_model_row_count to get the actual right answer.
2000-07-07 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (get_message_info): This wasn't quite right, it
will now work but still isn't perfect. See FIXME comment.
2000-07-07 Dan Winship <danw@helixcode.com>
* message-thread.c (remove_node): Add another argument "clast"
pointing to the container before the current one in the list,
which it can update if that turns out to be the one that it
removed.
(group_root_set): Update for remove_node change, and remove both
nodes in the "subjects are common" case. Fixes a bug that would
cause the message list to be truncated if this rule was invoked.
(sort_node): sort the tree by the original order of the messages
in the folder rather than by date.
2000-07-07 Dan Winship <danw@helixcode.com>
* message-list.c: Lots of changes. Store uids as node data on the
tree nodes and use those rather than rows where possible. (The
concept of "row" is just getting too complicated.) Get rid of the
summary_table, because given a uid we can call
camel_folder_get_message_info, which makes more sense than keeping
a separate uid->row hash table ourselves.
(get_message_info): update
(get_message_row): removed
(ml_col_cound, ml_row_count, ml_value_at, ml_set_value_at,
ml_cell_is_editable, ml_duplicate_value, ml_free_value,
ml_initialize_value, ml_value_is_empty, ml_value_to_string):
Removed. We always use the tree model now.
(message_list_init): Remove the non-tree code.
(build_tree): store uids in the tree rather than row numbers,
and build the message_list->uid_rowmap to map from uids to rows
when needed.
(message_list_regenerate): Renamed from _set_search, since it's
used to redraw in non-search cases too.
(message_changed): Use the uid_rowmap to get a model row number.
* message-thread.c (thread_messages): Change the interface on this
to work with the new MessageList.
* folder-browser.c (search_set, folder_browser_clear_search):
s/message_list_set_search/message_list_regenerate/
2000-07-07 Christopher James Lahey <clahey@helixcode.com>
* message-list.c (get_message_info): Handle a row number of -1
properly.
2000-07-06 Dan Winship <danw@helixcode.com>
* message-list.c (get_message_info): Map tree model row numbers to
summary row numbers.
(ml_tree_value_at, ml_tree_set_value_at,
ml_tree_is_cell_editable): So don't do that here.
2000-07-06 JP Rosevear <jpr@arcavia.com>
* mail-config.glade*: Glade files for the configuration dialog.
* mail-config.c (providers_config_new): Build the dialog with
glade.
2000-07-06 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c, folder-browser.c, mail-ops.c,
message-list.c: fix warnings.
* main.c (main): gtkhtmllib_init is no more. Call gconf_init
directly instead.
* message-list.c (message_list_select_next): New function to
select the first message on or after the given row that meets
certain flag criteria.
* mail-ops.c (real_fetch_mail): call message_list_select_next to
select first unread message in current folder if it changes.
(real_delete_msg): Remove the code to move the etable cursor. It
only makes sense really if you deleted the message with the
keyboard, so do it from etable_key.
* folder-browser.c (etable_key): call message_list_select_next to
select next non-deleted message after Delete.
* mail-identify.c: Add a workaround for a small gnome-vfs 0.2 bug
so we don't need to require CVS gnome-vfs.
2000-07-06 Not Zed <NotZed@HelixCode.com>
* message-thread.c (sort_thread): sort messages based on date for
the initial sort order.
(thread_messages_free): Implement.
* message-list.c (message_list_init_header): Setup the subject
renderer to a tree in tree mode.
(on_cursor_change_cmd): For a tree model, map the view row to the
data row.
(build_tree): Builds the tree data structure of all messages.
(message_list_set_search): For a tree model, build the tree here.
(ml_tree_icon_at): Icon callback, returns nothing.
(ml_tree_value_at):
(ml_tree_set_value_at):
(ml_tree_is_cell_editable): Maps tree node to data row, and calls
the equivalent table callback
(message_list_init_renderers): Setup the tree renderer if needed.
(message_list_init): set the root node invisible afterall.
(message_list_set_search): Clear the old tree before putting in a
new one.
* message-list.h: Add a tree renderer to render list, and
tree_view indicator.
* message-thread.[ch]: Code for message threading.
2000-07-05 Dan Winship <danw@helixcode.com>
* mail-identify.c (mail_identify_mime_part): Oops. My gnome-vfs
was out-of-date. Update for changed function name.
2000-07-05 Dan Winship <danw@helixcode.com>
* mail-identify.c (mail_identify_mime_part): Use the gnomevfs
sniff buffer interface to try to identify the MIME type when
everything else fails.
* mail-display.c (on_object_requested):
* mail-format.c (lookup_handler, handle_undisplayable,
handle_audio): s/gnome_mime/gnome_vfs_mime/
* Makefile.am: Add gnomevfs stuff
2000-07-03 Ettore Perazzoli <ettore@helixcode.com>
* component-factory.c (create_folder): Get rid of a compiler
warning by making sure `folder' is always initialized to some
value for any code path.
2000-07-03 Dan Winship <danw@helixcode.com>
* message-list.c (select_msg): call mail_display_set_message with
NULL if the message we tried to select doesn't exist (probably
meaning we tried to selecte the first message and the folder is
empty.)
* mail-display.c (mail_display_set_message): deal with NULL as an
input (meaning "undisplay previous message and display nothing").
2000-07-02 Dan Winship <danw@helixcode.com>
* mail-ops.c (real_fetch_mail): Remove hack to redisplay the
inbox, since folder_changed signals will now be emitted
appropriately.
* component-factory.c (create_vfolder_storage): Fix
filter_driver_new invocation.
* Makefile.am (bin_PROGRAMS): test-mail and test-thread should be
noinst.
* mail-ops.c (real_fetch_mail):
(vfolder_editor_clicked):
* component-factory.c (create_vfolder_storage):
Pass mail_uri_to_folder and rules to filter_driver_new.
2000-07-02 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser.c (mail_uri_to_folder): Fix double freeing of the
local exception `ex'.
2000-07-01 Ettore Perazzoli <ettore@helixcode.com>
* mail-ops.c (refile_msg): Only allow type "mail" in the folder
selection dialog.
2000-07-01 Dan Winship <danw@helixcode.com>
* pixmaps.h, pixmaps/*.xpm: Removed. These aren't being used any
more. (The real pixmaps are in ../art.)
2000-07-01 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c (get_message_info):
(select_msg): Updated to reflect camel-folder changes.
* mail-ops.c (real_fetch_mail): Modified to reflect camel-folder
changes.
2000-06-30 Dan Winship <danw@helixcode.com>
* mail-ops.c (print_msg): Use gnome-print to do a print preview.
* folder-browser-factory.c: Hook up "Print" button.
* message-list.c (message_list_foreach): New function, a wrapper
around e_table_selected_row_foreach, which calls the callback
function with UIDs rather than row numbers.
* folder-browser-factory.c: Remove never-used "Find" button from
the toolbar and replace it with "Refile". (We need a better icon
for this...). Hook up "Refile" to "refile_msg".
* mail-ops.c (refile_msg): Call the shell's user_select_folder
routine, and then use message_list_foreach and real_refile_msg to
do the work.
(delete_msg): Update to use message_list_foreach.
* folder-browser.c (mail_uri_to_folder): new function, extracted
from folder_browser_load_folder, to turn a URI into a folder.
(folder_browser_load_folder): Use it.
2000-06-30 Peter Williams <peterw@curious-george.helixcode.com>
* component-factory.c (create_news_storage, create_imap_storage):
Fixed to use new EvolutionShellClient proxy thingamajiggie.
2000-06-30 Dan Winship <danw@helixcode.com>
* message-list.c (on_row_selection): use the ETable row_selection
signal to track how many rows are selected. Eventually we will use
this info to disable toolbar buttons when you have too few/too
many messages selected, but the current toolbar widget doesn't
allow that.
* message-list.h, message-list.c, mail-ops.c: Change selected_row
and selected_uid fields of MessageList to cursor_row and
cursor_uid to be more correct according to the new ETable
interfaces.
2000-06-30 Ettore Perazzoli <ettore@helixcode.com>
* component-factory.c: Eeek. Fix typo: add missing star in the
declaration of `global_shell_client'.
2000-06-29 Ettore Perazzoli <ettore@helixcode.com>
* component-factory.c: Replace `global_shell_interface' with
`global_shell_client'.
2000-06-29 Jeffrey Stedfast <fejj@helixcode.com>
* mail-ops.c (delete_msg): Clean up compile warnings
(real_fetch_mail): Fetching from IMAP should do nothing
2000-06-29 Christopher James Lahey <clahey@helixcode.com>
* mail-ops.c: Handle multiple deletes (change by Peter Williams.)
2000-06-29 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser-factory.c: Changed "Send" to "Compose" to
avoid user confusion. Compose is a little more intuitive.
Also changed the pixmap to MAIL_NEW instead of MAIL_SND
* mail-ops.c (compose_msg): Renamed to avoid confusion
2000-06-29 Dan Winship <danw@helixcode.com>
* component-factory.c (create_imap_storage, create_news_storage):
remove some code incorrectly copied and pasted from
create_vfolder_storage which caused vfolder creation to stop
working.
2000-06-29 Christopher James Lahey <clahey@helixcode.com>
* message-list.c, mail-ops.c: Changed the name of
e_table_select_row to e_table_set_cursor_row.
2000-06-29 Peter Williams <peterw@helixcode.com>
* message-list.c (message_list_init): Set the dnd_code of the
ETableHeader to something so that Solaris sprintf doesn't die
on a NULL string.
* mail-config.c (providers_config_new): Check for a null "transport"
string (not all OS' handle NULL strings well *cough* Solaris)
2000-06-28 Dan Winship <danw@helixcode.com>
* mail-format.c (mail_generate_forward): add default subjects
* component-factory.c (create_folder): Refuse to create folders
not of type "mail", and correctly create an empty "mbox" folder
for new folders in /local.
* main.c (init_corba): Call od_assert_using_oaf() or
od_assert_using_goad() as appropriate to make sure people didn't
somehow trick the build system.
2000-06-28 Jeffrey Stedfast <fejj@helixcode.com>
* message-list.c: Added prototype for filter_date to make
it build cleanly
2000-06-27 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Made dates display grouping information
properly.
2000-06-27 Peter Williams <peterw@curious-george.helixcode.com>
* message-list.c (mark_msg_seen): Need to return a value
on error.
* main.c (main): Don't start threads or enter threads if
there's no threading! Sigh.
* test-thread.c: Don't compile if no threads.
* session.c: Work without broken threads.
* message-list.c (filter_date): Solve the ctime_r problem the
correct way, with the magic of autoconf.
2000-06-27 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Work around mismatched ctime_r functions. This
will be fixed.
2000-06-27 Peter Williams <peterw@curious-george.helixcode.com>
* mail-threads.c: Don't compile this if we don't have
threads enabled. This should maybe be on the Makefile.am
level.
2000-06-27 Michael Zucchi <zucchi@zedzone.mmc.com.au>
* component-factory.c (owner_set_cb): Put in a gross hack to
export the shell reference elsewhere.
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Added a value_to_string handler.
2000-06-26 Peter Williams <peterw@helixcode.com>
* component-factory.c, mail-ops.c: #ifdef the threads stuff so
that if USE_BROKEN_THREADS is not defined we just call the functions
in the main thread.
* mail-threads.h: Don't declare funcs if USE_BROKEN_THREADS not
defined.
* mail-threads.c: Put the query and message boxes on top so that
you can see them.
2000-06-26 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c (error_dialog): va_start() returns void, don't
assign it's retval to a variable.
2000-06-26 Ettore Perazzoli <ettore@helixcode.com>
* main.c (main): Call `GDK_THREADS_ENTER()' and
`GDK_THREADS_LEAVE()' around the main loop as in the examples from
the GTK+ FAQ.
* mail-threads.c (DEBUG): New macro for debugging.
(read_msg): Use it.
2000-06-25 Peter Williams <peterw@helixcode.com>
* Makefile.am: Clean up the various _LIBS and _CFLAGS
to work with simpler THREADS_LIBS and THREADS_CFLAGS scheme.
2000-06-23 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c (folder_browser_load_folder): Improved the
code to separate the imap namespace from the folder name.
2000-06-23 Peter Williams <peterw@curious-george.helixcode.com>
* component-factory.c: Include e-util/e-setup.h for the
prototype of evolution_dir; prototype create_news_storage.
(real_create_imap_storage, real_create_news_storage): New
functions moving the camel stuff into the async callback.
(create_imap_storage, create_news_storage): Chopped in
half to move camel stuff as above.
* mail-ops.c: Include "mail-threads.h" for threading protos.
(real_fetch_mail, real_send_mail, real_expunge_folder):
New functions moving the camel stuff into the async callback.
(async_mail_exception_dialog): A version of mail_exception_dialog
to be called from the async handlers (just calls mail_op_error())
(fetch_mail, expunge_folder, composer_send_cb): Cut in half to
move camel stuff as above.
(cleanup_send_mail): Clean up after the async real_send_mail
with the gtk_object_destroys et al.
* mail-threads.c: Instead of hiding the progress bar, make it
zip back and forth constantly.
(progress_timeout): New func. Timeout called to make the pbar
shimmy.
(timeout_toggle): New func. Turn on and off the shimmy effect.
(check_cond): New func. Make sure that the GCond for modal
operation is initialized before mail_op_{error,get_password}.
(show_error_clicked, read_msg, get_password_clicked): Move
over to timeout_toggle.
(mail_op_error,mail_op_get_password): Add check_cond() call.
* main.c: (main) Call g_thread_init.
* session.c: Change auth_callback stuff over to assume that it's
being called async. Note: no real good way to tell if this is
the case or not.
(request_callback): ifdef'ed out
(evolution_auth_callback): Use mail_op_get_password.
2000-06-22 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c (folder_browser_load_folder): Now should
correctly get the selected folder from the given URL.
2000-06-22 Chris Toshok <toshok@helixcode.com>
* folder-browser.c (folder_browser_load_folder): add handling for
loading "news:" folders.
* component-factory.c (create_news_storage): add a root for news
source.
(owner_set_cb): call create_news_storage.
2000-06-22 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c (folder_browser_load_folder): Updated to
prepend url-> path if it exists for that imap store.
* component-factory.c (create_imap_storage): Modified to not
prepend a hard-coded namespace.
2000-06-22 Chris Toshok <toshok@helixcode.com>
* mail-ops.c (fetch_mail_cleanup): new function, passed as arg to
mail_operation_try.
(fetch_mail): add cleanup func arg.
2000-06-22 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Changed ml_value_at to return "" instead of NULL
in some cases.
2000-06-22 Peter Williams <peterw@curious-george.helixcode.com>
* Makefile.am: Add GNOME_EXTRA_LIBS so that we get libgthread
in our LIBS for evolution-mail.
* mail-threads.c: Make the dialog boxes for error and
question non-modal. They're modal relative to the dispatch
thread, but before they would also eg lock up the toolbar
buttons (while the menus, managed by another process, were
active -- a weird effect).
2000-06-22 Peter Williams <peterw@curious-george.helixcode.com>
* mail-threads.[ch]: Extra argument to mail_operation_try:
'cleanup', a function to be called in the main thread after
the dispatcher thread exits. gtk_object_destroy's et al may
attempt to unmap windows so we can't do them in the dispatcher
thread :-(
* test-thread.c: Updated with demo of new argument working.
2000-06-22 Peter Williams <peterw@helixcode.com>
* test-thread.c (op_5): New tests for the get_password
hook.
* mail-threads.[ch]: New hook, mail_op_get_password, for
getting a user response from an async operation. The operation
blocks while waiting for the response. A big whole mutex
condition threading blocking dealie to make sure that it
works.
Also the error hook creates a dialog again, which also needs
to block its caller while we wait for the user to press ok.
2000-06-22 Peter Williams <peterw@helixcode.com>
* mail-threads.c (various functions): Prettify the UI
so that the progress bar doesn't become all huge 'n stuff.
(mail_operation_try): Now save the operation's description,
so that we can display it later as the default message.
(read_msg): When the operation starts set the label to its
UI-friendly name.
(dispatch_func): Free the saved prettyname.
2000-06-21 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Removed an erroneous comment.
2000-06-21 Dan Winship <danw@helixcode.com>
* mail-config.c (create_transport_page): Make this not crash if
you don't have a transport configured.
* message-list.c: Update received date to work like sent date.
2000-06-21 Peter Williams <peterw@helixcode.com>
* mail-thread.{c,h}: New files -- a simple API for executing
the major mail ops (fetch_mail etc) asynchronously, allowing
the operations to send messages and update a progress bar.
* test-thread.{c,h}: Tests the mail-thread API.
* Makefile.am: add mail-thread.[ch] to evolution_mail_SOURCES
and declare the test_thread noinst_PROGRAM.
2000-06-21 Peter Williams <peterw@helixcode.com>
* mail-format.c (mail_generate_reply): Include "e-setup.h" to
get the prototype for evolution_dir.
2000-06-20 Jeffrey Stedfast <fejj@helixcode.com>
* component-factory.c (create_imap_storage): Oops. Should
have checked for a NULL sources.
2000-06-20 Dan Winship <danw@helixcode.com>
* message-list.c (mark_msg_seen): Quick hack to prevent a NULL
pointer dereference. Things need to be cleaned up a bit more here
though.
* mail-sources.c: Oops. This should have been removed a long time
ago.
2000-06-20 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c (folder_browser_load_folder): Working on getting
this to work :)
* component-factory.c (create_imap_storage): Should now correctly
construct the folder path allowing the selection of a folder.
2000-06-20 Ettore Perazzoli <ettore@helixcode.com>
* mail-format.c (mail_generate_reply): Declare `evolution_dir'.
Ugly, ugly, ugly, but I am not sure where it should go instead.
2000-06-19 Ettore Perazzoli <ettore@helixcode.com>
* mail-ops.c (ask_confirm_for_empty_subject): New function to ask
confirmation for an empty subject line.
(composer_send_cb): Use it if the subject is empty and only send
the message if the user confirms.
2000-06-20 Jeffrey Stedfast <fejj@helixcode.com>
* component-factory.c (create_imap_storage): Now creates the IMAP
storage (listing subfolders and such)
2000-06-19 Dan Winship <danw@helixcode.com>
* mail-format.c (find_preferred_alternative): add an option to
prefer text/plain.
(reply_body): add an option to prefer text/plain
(mail_generate_reply): Check the mail sending preferences, and
generate a text/plain reply if the user prefers to send plain text
(and we have a text/plain part to generate a reply from).
2000-06-19 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c (providers_config_new): Should now correctly display
the Transport page (made it set the optionmenu correctly, before it
would only set SMTP).
(create_transport_page): Updated to set the page info to sendmail/smtp
based on the url.
(create_service_page): Had to add some code to set data on some objects
so I could grab the objects I needed to modify in the above function.
2000-06-18 Jeffrey Stedfast <fejj@helixcode.com>
* folder-browser.c (folder_browser_load_folder): started to add
code to load an IMAP folder.
* component-factory.c: Started to add a create_imap_storage
method so that we can eventually have our IMAP store displayed
in the tree view.
(create_vfolder_storage): Renamed from
create_test_storage().
(owner_set_cb): Updated.
2000-06-17 Dan Winship <danw@helixcode.com>
* message-list.c (message_list_set_folder): Prevent double-freeing
action on summary_table and uid_rowmap.
2000-06-16 Dan Winship <danw@helixcode.com>
* message-list.c (ml_set_value_at): Implement clicking on the
envelope icon to set read/unread. Based on a patch by clahey.
(select_msg): keep the timeout id for the "seen" flagging in the
message_list structure, so ml_set_value_at can clear it so it
doesn't re-mark a message seen after you click it unseen.
2000-06-16 Dan Winship <danw@helixcode.com>
* message-list.c (get_message_row): new function to do a uid to
row mapping.
(mark_msg_seen, select_msg, message_changed,
message_list_set_folder): Update for Camel flag changes.
(on_cursor_change_cmd): Rename "row_to_select" to "selected_row",
and keep a "selected_uid" as well.
* mail-ops.c (composer_send_cb): Update for Camel flag changes,
and fix some memory-handling bugs. (Free the post_send_data when
the composer is destroyed, not when the user clicks "send", which
could happen never, or more than once.)
(delete_msg): Update for Camel flag changes, and fix the "holding
down the delete key skips some messages" bug.
2000-06-15 Dan Winship <danw@helixcode.com>
* mail-ops.c (fetch_mail):
* component-factory.c (owner_unset_cb):
* message-list.c (message_list_set_folder): Update for CamelFolder
changes.
* folder-browser.c (folder_browser_clear_search): New function to
revert back to non-searching mode.
* mail-ops.c (fetch_mail): Use folder_browser_clear_search.
* mail-display.c (on_url_requested): if the document requests an
unknown URL, it's not an error; just ignore the URL.
* mail-ops.c (fetch_mail): If there's no new mail, tell the user.
2000-06-14 Radek Doulik <rodo@helixcode.com>
* main.c (main): call gtkhtmllib_init here
2000-06-13 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c (on_SourceConfigDialogButton_clicked): Make sure source
is always pointing to something, so a blank is not written to the config file
on close.
2000-06-13 Ettore Perazzoli <ettore@helixcode.com>
* Makefile.am (SHELL_OBJS): Removed.
(evolution_mail_LDADD): Use `libeshell.a'. Also use
`top_builddir' consistently.
2000-06-12 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c: Got rid of sources_max_row and identities_max_row
as they are not really needed (just use clist->rows)
(on_cmdSourcesEdit_clicked): Modified to make 'source'
point to the data being edited.
(on_cmdSourcesAdd_clicked): Adds a new clist item and selects it so the
editor knows where to stick the data when it's done.
2000-06-12 Federico Mena Quintero <federico@helixcode.com>
* message-list.c: Removed the ETableModel thaw handler.
2000-06-12 Dan Winship <danw@helixcode.com>
* folder-browser.c (folder_browser_set_uri): Return the result of
folder_browser_load_folder.
(get_prop, set_prop, folder_browser_properties_init): Remove. No
longer needed.
* folder-browser-factory.c (folder_browser_factory_new_control):
Add a "uri" argument, return NULL if setting it fails.
(folder_browser_factory_new_control): Remove property bag stuff.
(folder_browser_factory_init, folder_browser_factory): Remove
this, since we're using the component factory now.
* component-factory.c (create_view): Update for
folder_browser_factory_new_control change and return NOTFOUND as
appropriate.
* main.c (main): Don't call folder_browser_factory_init.
* mail-format.c (mail_generate_reply): Fix the subject generation
so we don't get "Re: Re:". This is working around something that
may later be declared a misfeature in Camel.
2000-06-10 Ettore Perazzoli <ettore@helixcode.com>
* component-factory.c (create_folder): New stub implementation for
the folder creation function in the EvolutionShellComponent we
expose [it simply returns success all the time].
(factory_fn): Pass this function to `evolution_shell_component_new'.
2000-06-09 Dan Winship <danw@helixcode.com>
* folder-browser.c (folder_browser_new): Add a serial number to
FolderBrowser.
* folder-browser-factory.c (control_activate, control_deactivate):
Include fb serial number in the name of the Bonobo toolbar to
prevent problems with disappearing toolbars. This is a kludge and
should go away.
* mail-ops.c (expunge_folder): display error from
camel_folder_expunge if there is one.
* message-list.c (select_row): install an idle function to
select the row rather than doing it directly. Ugh. What a
kludge, but at least it works now.
* session.c (evolution_auth_callback): Update for
CamelAuthCallback changes. (Uncache passwords when asked to.)
* mail-ops.c (fetch_mail): close and expunge the source folder
after copying it to a local folder.
2000-06-09 Ettore Perazzoli <ettore@helixcode.com>
* component-factory.c (create_view): Updated to match the changes
to the definition of `EvolutionShellComponentCreateFn'. If @type
is not "mail", return an "unsupported type" error.
(factory_fn): Pass NULL for the `remove_folder' and
`create_folder' functions.
2000-06-09 Dan Winship <danw@helixcode.com>
* mail-format.c: Redo things a bit so that whitespace-only
text parts aren't displayed. (In particular, so that
whitespace-only subparts of multipart/mixed aren't displayed as
separate (empty) parts.)
2000-06-06 Dan Winship <danw@helixcode.com>
* mail-ops.c (fetch_mail):
* folder-browser.c (folder_browser_load_folder): Update for folder
creation/existence changes.
* message-list.c (message_list_set_folder): Remove the code to
create the folder if it doesn't exist, since we don't want to do
that.
2000-06-05 Dan Winship <danw@helixcode.com>
* mail-ops.c (composer_send_cb): Leave the composer window around
if the message doesn't get sent.
2000-06-05 Matt Loper <matt@helixcode.com>
* folder-browser.c (etable_key): Allow "GDK_KP_Delete", a keypad
delete key, to delete a message.
2000-06-05 Dan Winship <danw@helixcode.com>
* session.c (evolution_auth_callback): Remember passwords between
calls.
(forget_passwords): Callback for "Forget Passwords" menu item.
* folder-browser-factory.c (control_activate):
(control_deactivate): Add "Forget Passwords" menu item.
* mail.h, mail-ops.c: fix some function prototypes
* folder-browser.c (etable_key): Add "Delete" = delete message.
* mail-format.c (mail_generate_forward): Update for new composer
attachment interface.
2000-06-02 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c (providers_config_new): Added a new notebook
page that allowed for mail format (text/plain or
multipart/alternative)
2000-06-02 Dan Winship <danw@helixcode.com>
* message-list.c (filter_date): If the date in the summary is 0,
output "?".
* component-factory.c (create_view): keep a GList of folder
browsers created
(owner_unset_cb): Go through the list and close each folder before
exiting so they sync their summary state, etc to disk.
* mail-ops.c (fetch_mail): Use camel_service_connect, not
connect_with_url, since we already passed the URL into
camel_session_get_store.
2000-06-02 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Use camel_folder_free_summary instead of
g_ptr_array_free. Unref the folder when we're done with it.
2000-06-02 Christopher James Lahey <clahey@helixcode.com>
* session.c: Revert removal of e_setup_base_dir.
2000-06-02 Dan Winship <danw@helixcode.com>
* folder-browser.c (my_folder_browser_init): Connect to ETable's
key_press signal.
(etable_key): scroll mail on space/backspace.
2000-06-02 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Made sent column as wide as from column.
2000-06-02 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c (on_cmdSourcesAdd_clicked): Changed identity_row
to source_row as this is a Sources clist we are dealing with and
not an identity clist
(on_cmdSourcesEdit_clicked): same
(on_cmdSourcesDelete_clicked): again, same
(on_cmdSourcesEdit_clicked): Source editor now fills in data from
the clist
2000-06-01 Dan Winship <danw@helixcode.com>
* message-list.c: Add a date column.
(COL_SENT_WIDTH_MIN): Make this wider.
(ml_value_at): return the sent date (as a time_t) for COL_SENT.
(Fix COL_TO too while I'm here.)
(ml_duplicate_value, ml_free_value, ml_initialize_value,
ml_value_is_empty): COL_SENT is numeric now.
(message_list_init_renderers): Create a date renderer (using
text_filter to translate the time_t into a string).
(message_list_init_header): Use render_date for COL_SENT.
2000-06-01 Christopher James Lahey <clahey@helixcode.com>
* session.c: Don't call e_setup_base_dir.
2000-06-01 Dan Winship <danw@helixcode.com>
* mail-format.c (mail_generate_forward): Fix forwarding to work
for people other than me. :) [Although apparently it doesn't
really.]
* mail-ops.c (delete_msg): Add a quick hack to move the selection
down a row when you delete a message.
* mail-format.c (handle_message_rfc822): use <blockquote> rather
than <center><table border=1 width=95%> to frame the embedded
message. If <pre> text in the subtable won't fit in the 95% width,
GtkHTML will write past the border of the table (and
<blockquote><table border=1> causes creeping updates so it's not
usable for now).
2000-06-01 Christopher James Lahey <clahey@helixcode.com>
* message-list.c (message_list_init): Turn off the grid in our
ETable.
2000-06-01 Dan Winship <danw@helixcode.com>
* mail-format.c (write_headers): Oops. This needs to take a
message argument because we might be writing headers for an
embedded message/rfc822 subpart rather than the root document.
2000-06-01 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c: Config dialogs are completed.
(service_acceptable): Fixed a segfault caused by duplicate
camel_exception_free()
(providers_config_new): Identity and Source clists are now filled in
when the dialog is created as well as the Transport page
* folder-browser-factory.c: Renamed Tool/ menu items
Vfolder was changed to Virtual Folder and
Configure Camel Providers was changed to Mail Configuration
2000-06-01 Ettore Perazzoli <ettore@helixcode.com>
* Makefile.am (evolution_mail_LDADD): Link with
`libemiscwidgets.a'.
* mail-display.c (mail_display_new): Use an EScrollFrame instead
of a GtkScrolledWindow.
(mail_display_set_message): Likewise.
* mail-display.h: Replace the GtkScrolledWindow with an
EScrollFrame.
2000-06-01 Dan Winship <danw@helixcode.com>
* component-factory.c (owner_unset_cb): Quit when the shell exits.
This is a kludge, but a pretty necessary one until the refcounting
bugs that keep the component from exiting properly are fixed.
2000-05-31 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c: Partially implemented the source
configuration, seems to segfault due to a destroyed
gnome dialog being destroyed again in the method
on_SourceConfigDialogButton_clicked()
2000-05-31 Dan Winship <danw@helixcode.com>
* mail-format.c (free_url, handle_text_enriched,
get_url_for_icon): Fix up memory management of x-evolution-data
URLs so the URLs and/or their data don't get freed while there are
still references to them.
* message-list.c (message_list_init_header): redo the (unused)
online status column to no longer refer to pixmaps that no longer
exist.
2000-06-01 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser-factory.c (control_activate): Put the toolbar
into a frame to make it look like standard GNOME toolbars. Also,
set `GNOME_DOCK_ITEM_BEH_NEVER_VERTICAL' so that it does not do
evil things when its moved to the left or the right of the window.
2000-05-31 Jeffrey Stedfast <fejj@helixcode.com>
* mail-config.c: Configuration dialog now allows
adding/editing/deleting of Identities (which leaves
adding/editing/deleting of sources left to implement).
The data is also saved when the dialog is exited via
the OK button.
2000-05-31 Dan Winship <danw@helixcode.com>
* mail-format.c (mail_format_mime_message): Initialize the "urls"
hash table stored on the message and store cid and other URLs
there rather than as object data on the message.
(get_cid): rewrite this a bunch
(handle_text_enriched): move the code from write_iframe_string()
into here, since it's the only place that actually needs it.
(handle_text_html): simplify this a lot. We can use a cid: URL
here rather than x-evolution-data.
(get_url_for_icon): New routine to return URLs for icons, and
cache the results, so we don't have to keep re-reading the icon
files (and so we can't be spoofed into reading non-icon files).
(handle_mystery, handle_audio): use get_url_for_icon.
* mail-display.c (save_data): move the CamelMimePart filename
extracting code from get_cid to here.
(on_link_clicked, on_object_requested): Update for cid: changes.
(on_url_requested): Kill off the kludgy, exploitable x-gnome-icon
URL schema, update cid and x-evolution-data to match
mail-format.c.
It should now be easier to implement RFC 2557 (Content-Location,
etc), but that RFC still pretty much sucks.
2000-05-30 Dan Winship <danw@helixcode.com>
* mail-format.c: Redo this back to the old way: a single GtkHTML
with various things inline in it. (Gets rid of flicker, simplifies
some scrolling, selecting, and printing issues.)
(handle_text_enriched, handle_text_html): Use <iframe>s for these,
to protect the rest of the document from their possibily invalid
HTML.
(handle_via_bonobo): Use (new-and-improved) <object> tags for
this, moving most of the work back into mail-display.c
* mail-display.c (on_object_requested): Move the Bonobo embedding
code back here again (reorganized a bit).
(on_url_requested): add x-evolution-data handler, for iframe
bodies.
(mail_html_new, mail_html_end): removed
(mail_display_set_message, mail_display_new): Update for NWO.
2000-05-30 Not Zed <NotZed@HelixCode.com>
* folder-browser.c (search_set): Properly encode the search string.
2000-05-30 Jeffrey Stedfast <fejj@helixcode.com>
* mail.h: Added a prototype for providers_config_new() which
is the constructor for the configuration dialog window
* mail-config.c: Added set_service_url() which is basically
the reverse of get_service_url().
Implemented on_cmdCamelServicesOK_clicked() - The configuration
window will now remember the Sendmail/SMTP data that the user
had entered in the previous session.
Removed on_cmdCamelServicesApply_clicked() - No need for this.
2000-05-30 Dan Winship <danw@helixcode.com>
* message-list.c (message_changed): call
e_table_model_row_changed, not e_table_model_changed so we do less
work, and don't lose the current selection.
(select_msg): Set up a timer to mark the displayed message as
"seen" if it's selected for longer than 1.5 seconds (a number
pulled out of Matt's butt).
(ml_value_at): Use the MESSAGE_STATUS column for read/unread as
well as deleted.
* message-list.c: use the "new" tigert pixmaps rather than the
older ones. Includes a "replied to" icon (which is used now), but
no "deleted" icon (although we have the strikeout renderer for
that now).
2000-05-30 Christopher James Lahey <clahey@helixcode.com>
* message-list.c, message-list.h: Added bold for unread messages.
2000-05-30 Jeffrey Stedfast <fejj@helixcode.com>
* mail.h: Added a prototype for providers_config()
which is the callback for a new menu item that
will construct a configuration dialog for the camel
providers and identities and display it
* mail-config.c: Added some code to construct the
new providers dialog and a bunch of callbacks (most
of which are not yet useful)
* mail-ops.c: Added the code for the providers_confi()
callback
* folder-browser-factory.c: Added the
"Tools/Camel Providers Configuration ..." menu item
2000-05-30 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Switched to using "cursor_change" signal instead
of "row_selection" for switching messages. Select the first row
(still doesn't work because of ETable.) Adapt to some small
ETable changes. Set drawfocus to FALSE.
2000-05-29 Not Zed <NotZed@HelixCode.com>
* folder-browser.c (folder_browser_load_folder): Hardcode the
vfolder source to just the inbox (so at least it returns
something).
* component-factory.c (create_test_storage): Create a vfolder dir
first, and put the folders in that.
(create_test_storage): Create the storage as VFolders, not
"storage_name" :)
2000-05-28 Dan Winship <danw@helixcode.com>
* mail-config.c (error_dialog): helper function since we need to
set "modal" on the dialogs returned by gnome_error_dialog to make
them work when popped up from the modal Druid.
(service_acceptable): New function to check if the info entered on
a store/transport page actually checks out.
(mail_config_druid): Connect to the "next" signal on the store and
transport pages and don't let the user continue if the data is
bad and "check this before continuing" is checked. Also, only
display sources/transports in the "mail" domain. (Ie, not
"vfolder".)
* mail-format.c (write_recipients_to_stream): Use `foo@bar' rather
than `<foo@bar>' for recipient with no name.
* mail-ops.c (fetch_mail): don't put up an error message if the
user cancels the password dialog.
2000-05-27 Not Zed <NotZed@HelixCode.com>
* Makefile.am (SHELL_OBJS): Include mail storage so we can
initialise folders.
* component-factory.c (create_test_storage): Parses vfolder
defintions and adds them to the storage. Definetly needs more
work.
* folder-browser-factory.c (control_activate): Add the VFolder
druid menu item.
(control_deactivate): And remove it.
* mail-ops.c (vfolder_editor_clicked): For editing vfolder
definitions (rather like filters, oddly enough :). Tries to
update the shell but it doesn't seem to work properly - requires a
mail component restart to take effect.
* folder-browser.c (folder_browser_load_folder): Handle vfolder:
urls' appropriately and map to camel. Still needs a way to tell
the vfolder what folders to search! (all vfolders come up empty!).
2000-05-28 Christopher James Lahey <clahey@helixcode.com>
* message-list.c, message-list.h: Added a COL_DELETED and made it
the strikeout column for both text renderers.
2000-05-27 Dan Winship <danw@helixcode.com>
* mail-format.c: Various improvements:
(call_handler_function, etc): Add a "mime_type" argument to the
handlers, so that if a part is tagged as
"application/octet-stream", and we figure out that it's really
something else, the handler we call can know what that something
else is.
(handle_text_enriched): Small fixes to make this not do
text/enriched-specific syntax in text/richtext or vice versa.
(handle_mystery): Allow for mystery data that can't even be saved
to disk. (ie, unrecognized external-body). Let the caller specify
the URL to use.
(handle_message_external_body): New function to deal with
message/external-body parts. Generates URLs for anon-ftp,
local-file, and URL access-types, and a more-useful-than-before
descriptive message for other types.
(handle_audio, handle_undisplayable): Use gnome_mime_get_value to
try to get a description of the MIME type to display to the user
rather than the raw form. (This will only work if the user has
recent gnome-vfs installed. [If they don't, it works just like
it used to.])
2000-05-26 Dan Winship <danw@helixcode.com>
* mail-format.c (handle_text_html): Fix a bug (security/stability)
in its usage of mail_html_write.
* mail-ops.c (composer_send_cb, reply): set CAMEL_MESSAGE_ANSWERED
on a message after a successful reply.
* message-list.c (folder_changed): free the summary with
camel_folder_free_summary rather than g_ptr_array_free.
* mail-format.c (handle_via_bonobo): Update for PersistStream
changes
2000-05-25 Ettore Perazzoli <ettore@helixcode.com>
* main.c (main): Initialize the component factory.
* Makefile.am (evolution_mail_LDADD): Link with
`evolution-shell-component.o' from the shell directory.
* evolution-mail.oafinfo: Updated with the
Evolution::ShellComponent OAFIID.
* evolution-mail.gnorba: Updated with the
Evolution::ShellComponent GOAD ID.
* folder-browser-factory.c (folder_browser_factory_new_control):
New function; code moved out from `folder_browser_factory'.
(folder_browser_factory): Use it.
* component-factory.c: New.
* component-factory.h: New.
2000-05-24 Dan Winship <danw@helixcode.com>
* mail-ops.c (composer_send_cb): connect to and disconnect from
the transport.
2000-05-24 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Added libepaned.a.
* folder-browser.c: Switched from GtkPaned to EPaned.
2000-05-23 Ettore Perazzoli <ettore@helixcode.com>
* Makefile.am: Don't link to `evolution-service-repository.o'
anymore.
* folder-browser-factory.c: Don't use crufty service-repository
anymore.
2000-05-21 Ettore Perazzoli <ettore@helixcode.com>
* message-list.c (get_message_info): Made static.
(ml_initialize_value): Return NULL to placate compiler.
* folder-browser.c (folder_browser_gui_init): Add cast.
* mail-display.c (mail_html_new): Don't pass an empty URL to
`gtk_html_begin()' anymore.
* mail-config.c (put_html): Don't pass an empty URL to
`gtk_html_begin()' anymore.
* mail-display.h: Updated for the new GtkHTML API that uses
`GtkHTMLStream *' instead of `GtkHTMLStreamHandle'.
* mail-display.c: Likewise.
* mail-config.c: Likewise.
* mail-format.c: Likewise.
2000-05-19 NotZed <NotZed@HelixCode.com>
* mail-format.c: Fixes for stream stuff.
* mail-display.c (save_data_cb): Remove exception stuff on streams.
2000-05-19 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Added initialize_value and value_is_empty
callbacks.
2000-05-18 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c (folder_browser_factory): Remove
development_warning (moved to shell)
* message-list.c (select_msg): Update for camel_folder_get_uids
(folder_changed, message_list_set_folder): Update for
camel_folder_get_summary
* mail-ops.c (fetch_mail): Update for camel_folder_get_uids
2000-05-17 Dan Winship <danw@helixcode.com>
* mail-component.c: This seems to be cruft. Nuke it.
* mail-display.c (save_data_cb, save_data, on_url_requested):
* mail-format.c (handle_text_plain_flowed, handle_text_html):
Use camel_data_wrapper_write_to_stream rather than
camel_data_wrapper_get_output_stream.
2000-05-16 NotZed <NotZed@HelixCode.com>
* mail-ops.c (filter_edit): Function to bring up the filter editor.
(filter_druid_clicked): Save/close dialogue.
(fetch_mail): Apply filters to incoming mail ... *hold breath*
If we are coming from a non-indexed/searchable/etc source, then
copy it to an mbox first. When copying mail from an mbox source,
dont remove it aftewards, open it for append, so partially
filtered mail isn't lost.
* Makefile.am (evolution_mail_LDADD): Added libfilter.
(INCLUDES): Add EVOLUTION_DATADIR, and fix matt's brokeneditor(tm)
for putting spaces instead of tabs in.
2000-05-16 Christopher James Lahey <clahey@helixcode.com>
* mail-format.c: Removed usage of bonobo_object_destroy.
2000-05-14 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Updated to work with new ETable resizing.
2000-05-12 NotZed <NotZed@HelixCode.com>
* mail-ops.c (fetch_mail): Use 6 X's to mkstemp, as required by
the man page, just a temp fix, this should probably change to a
known filename.
2000-05-11 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c (control_activate): Now that we depend
on current gnome-libs we can make the toolbar detachable again.
2000-05-11 Federico Mena Quintero <federico@helixcode.com>
* folder-browser-factory.c (development_warning): Left-justify the
message.
2000-05-10 Christopher James Lahey <clahey@helixcode.com>
* folder-browser-factory.c (development_warning): Made this dialog
have fewer buttons.
2000-05-10 Christopher James Lahey <clahey@helixcode.com>
* folder-browser-factory.c (development_warning): New development
warning text from Nat.
2000-05-10 Larry Ewing <lewing@helixcode.com>
* mail-config.c (html_new): only set the default background color
if style is not NULL.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Removed folder-browser-factory.h since it doesn't
exist. Added mail-display.h, mail-types.h, pixmaps.h.
2000-05-09 Matt Loper <matt@helixcode.com>
* folder-browser-factory.c (control_activate): Remove "File->mail"
menuitem.
* mail-config.c (mail_config_druid): Fill in "blah blah blah".
2000-05-09 Dan Winship <danw@helixcode.com>
* folder-browser.c (folder_browser_load_folder): make this a
little less kludgy. Use gnome_error_dialog rather than printf on
errors.
* mail-ops.c (fetch_mail): Fix to work with the new shell stuff...
sorta. Will need more fixing later when the new shell framework is
more done.
* mail-config.c (finish): Call gnome_config_sync so the data
actually gets written.
2000-05-08 Dan Winship <danw@helixcode.com>
* mail-display.c (save_data_cb):
(on_url_requested): Update for CamelStream CamelException changes.
* mail-format.c: Pass NULL for a CamelException in a bunch of
places... the user will see that the data is not being displayed,
and there's not a lot we can do, and none of these things should
be failing anyway. Maybe fix this later.
2000-05-07 NotZed <NotZed@HelixCode.com>
* message-list.c (ml_value_at): Size moved to message info, rather
than content info structure.
2000-05-07 Dan Winship <danw@helixcode.com>
* message-list.c (select_msg): unref the message after displaying
it.
* mail-format.c (get_data_wrapper_text):
(handle_text_plain_flowed):
(handle_via_bonobo): Replace camel_stream_close calls.
2000-05-07 Matt Loper <matt@helixcode.com>
* folder-browser-factory.c: Changed a toolbar button from saying
"New mail" (which suggests you might be composing new mail) to
"Get mail".
2000-05-06 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c (folder_browser_factory): Don't
hardcode "inbox" here.
* folder-browser.c (folder_browser_set_uri): Don't hardcode
"inbox" here either.
(folder_browser_load_folder): Create a new store according to the
folder browser's URI, and load the mbox file from that store.
Parts of this are temporary.
* session.c, mail.h: There is no longer a global store, just a
global session.
* mail-config.c, mail-ops.c: Update for default_session -> session
change. fetch_mail is currently broken.
2000-05-06 Dan Winship <danw@helixcode.com>
* mail-config.c: New code to configure identity, mail source, and
mail transport.
(mail_config_druid): A druid using the config widgets. (Only
allows configuration of a single identity, source, and transport.)
* mail-ops.c (check_configured): New function to make sure the
user has configured stuff, and call the druid if not.
(fetch_mail, send_msg, send_to_url, reply, forward_msg): Call
check_configured
(composer_send_cb): Make this pass the message to a CamelTransport
rather than just printing it to stdout.
* folder-browser-factory.c (development_warning): Add a warning
about sending mail, since you can do that now.
2000-05-06 Chris Toshok <toshok@HelixCode.com>
* .cvsignore: ignore evolution-mail.pure
* Makefile.am: add support for building evolution-mail.pure
2000-05-06 Dan Winship <danw@helixcode.com>
* mail.h: consolidate mail-format.h, mail-identify.h, mail-ops.h,
main.h and session.h into this new file. There's no reason to have
a .h for every .c.
2000-05-05 Anders Carlsson <andersca@gnu.org>
* test-mail.c (create_container): Use the OAFIID when using an
OAF-enabled build of bonobo.
2000-05-04 NotZed <NotZed@HelixCode.com>
* message-list.c (message_list_set_folder): Get the whole message
summary right away.
(folder_changed): And if we change too.
(ml_row_count): Use the match count or summary table length as the
row count.
(get_message_info): Use array references to lookup message summary
info. For the search result list, use the summary_search_cache to
cache the info lookup.
(message_list_init): Allocate the summary search cache.
(message_list_destroy): Free the summary search cache and the
summary table, if there is one to free.
(message_list_set_search): Save the match count, and clear the
summary search cache for reuse.
(folder_changed): Re-retrieve the summary list if the folder has
changed.
(message_list_set_folder): Retrieve the summary list when opening
the folder.
2000-05-03 Jason Leach <leach@wam.umd.edu>
* Makefile.am (evolution_mail_LDADD): s/-lunicode/$(UNICODE_LIBS)/
in the LDADD section.
2000-05-03 Dan Winship <danw@helixcode.com>
* mail-format.c (write_recipients_to_stream, write_headers): Make
the "Cc:" field optional again. (Before, we could check if
camel_mime_message_get_recipients returned NULL, but now we need
to actually look into the returned CamelInternetAddress object.)
2000-05-03 Larry Ewing <lewing@helixcode.com>
* folder-browser.c (folder_browser_gui_init): comment out the
changed signal for now.
2000-05-02 Matt Loper <matt@helixcode.com>
* Makefile.am: set G_LOG_DOMAIN.
2000-05-02 Larry Ewing <lewing@helixcode.com>
* message-list.c (message_list_set_search): only free search if it
is not NULL.
2000-05-02 NotZed <NotZed@HelixCode.com>
* folder-browser.c (folder_browser_gui_init): Connect the changed
signal to search, so it searched immediately?
2000-05-01 NotZed <NotZed@HelixCode.com>
* pixmaps.h: Added envelope-deleted state.
* folder-browser-factory.c: Setup callback for actual delete op.
(control_activate): Setup a tool menu item to expnge deleted
messages.
* mail-ops.c (delete_msg): Toggle the delete flag on a message.
(expunge_folder): New function to expunge deleted messages from
the current folder.
* folder-browser.c (folder_browser_gui_init): A hackish little
quick-search entry.
(search_activate): Perform a quick-search on the folder subject
only.
(folder_browser_gui_init): Add an option meny to the search line.
(create_option_menu): Build the option menu from a table.
(search_set): Build a search from another string whent he option
menu or text item is changed. 5 search options are defined so
far.
* message-list.c (get_message_info): If there is an active search,
then get the data from that ... use this instead of
_get_message_info().
(ml_row_count): If we have an active search, get the info from its
result.
(select_msg): Changed to use get_message_info, so searches work.
(ml_value_at): And same here.
(message_list_init_renderers): Added a 3rd state to message_status
= deleted.
(ml_value_at): Show the message state as deleted, if it is marked
for deletion.
(folder_changed): When the folder changes, update the display.
(message_list_set_folder): Connect to the folder_changed event
here.
(message_changed): Callback to update the display when the message
changes.
(select_msg): And connect to the message_changed signal so we know
when it cahgnes.
(message_list_set_search): Save the search string.
(folder_changed): If the folder changes, re-run the search,
otherwise we may end up with invalid entries in the display.
* mail-display.c: Include missing errno.h.
2000-04-30 Dan Winship <danw@helixcode.com>
* session.c (session_providers_init): This is no longer necessary.
* mail-ops.c (fetch_mail): Remove kludge to load remote provider,
as camel can do it by itself now.
2000-04-29 Dan Winship <danw@helixcode.com>
* mail-display.c (on_link_clicked): Handle clicks on "cid" URLs by
popping up a "Save Attachment" dialog.
* mail-format.c (get_cid): if the part has a Content-Disposition
with a filename specified, record (a sanitized version of) that on
the wrapper when creating the cid reference, so the "save
attachment" code can use it later.
(handle_mystery): fix a bug in the cid generation here.
2000-04-29 Dan Winship <danw@helixcode.com>
* mail-format.c (lookup_handler, etc): Improve the builtin vs
bonobo selection code.
(handle_mystery): Include name and Content-Description in the
"mystery data" info, when available
(handle_unknown_type): Call mail_identify_mime_part before
giving up.
(handle_undisplayable): Split out of handle_unknown_type now
that handle_unknown_type can try alternate viewers.
(handle_via_bonobo): Fall back to handle_undisplayable if the
bonobo control fails.
* mail-identify.c (mail_identify_mime_part): New function to
attempt to identify a MIME part that we can't identify based on
Content-Type alone.
* mail-display.c (on_url_requested): redo the mystery data icon
display stuff less kludgily.
2000-04-28 Dan Winship <danw@helixcode.com>
* mail-format.c (write_recipients_to_stream, write_headers,
mail_generate_reply): Update (minimally) for Camel recipient
changes.
2000-04-28 Ettore Perazzoli <ettore@helixcode.com>
* main.c (init_bonobo): Don't call `init_corba()' and don't get
any args.
(init_corba) [!USING_OAF]: Fix args.
2000-04-27 Ettore Perazzoli <ettore@helixcode.com>
* folder-browser-factory.c: New macro `CONTROL_FACTORY_ID', which
is #defined to a different value according to whether we are
`USING_OAF' or not.
(folder_browser_factory_init): Use `CONTROL_FACTORY_ID'.
* test-mail.c
(init_corba): New helper function, implemented differently
according to `USING_OAF'.
(main): Use `init_corba()'.
* main.c
(init_corba): New helper function, implemented differently
according to `USING_OAF'.
(init_bonobo): Use `init_corba()'.
* Makefile.am: Install OAF stuff if `USING_OAF'. Add
`-I$(datadir)/idl' to the `orbit-idl' command-line so that we can
use Bonobo IDL files installed under our prefix as well. Also,
use `$(ORBIT_IDL)' instead of hardcoded `orbit-idl'.
* evolution-mail.oafinfo: New file.
2000-04-27 Dan Winship <danw@helixcode.com>
* mail-format.c: Move text_to_html to e-util.
* mail-ops.c (send_to_url): New routine. Thin wrapper for
e_msg_composer_new_from_url.
* mail-display.c (on_link_clicked): print a warning for news or
nntp URLs (which we'll deal with some day), and call send_to_url
for mailto URLs.
* mail-format.c (text_to_html): Improve URL conversion code.
Recognize https, recognize "www\..*" without a prefixed "http://".
Properly escape &, <, >, etc in URL strings. Don't be fooled by
"mailto:", "http://", etc with no following data.
2000-04-26 Dan Winship <danw@helixcode.com>
* mail-format.c (text_to_html): Reorganize a bit and add a new
flag, TEXT_TO_HTML_CONVERT_URLS to recognize and wrap URLs
in text.
* mail-display.c (mail_html_new): Add link_clicked signal handler.
(on_link_clicked): Use gnome_url_show to launch a browser.
* mail-format.c: update for CamelStream changes. Update for
CamelMimeBodyPart -> CamelMimePart
2000-04-25 Dan Winship <danw@helixcode.com>
* mail-display.c, mail-format.c: Redo large chunks of this. The
mail display now consists of a vbox in a scrolled window, in which
we put multiple GtkHTML objects. This means broken HTML in one
part can't corrupt other parts. The headers now scroll with the
body. Unrecognized attachments look prettier, but still don't do
anything, and will probably be changed later. We can also now
display nested message/rfc822 parts and multipart/alternatives
with multipart subparts. Oh, and text/{richtext,enriched}, since
we had all these ancient sample messages that use it and the lack
of support annoyed me. :)
Bonobo embeddables are broken right now, but I don't think that's
my fault.
* mail-format.c (reply_body): Fix some bugs that crept into reply
generation. This needs a lot more work to deal correctly with
complicated bodies.
(setup_function_table): pass unknown text subtypes to
handle_text_plain.
(handle_multipart_appledouble): new handler. Just ignores the
first (application/applefile) part and tries to display the
second part. Since the second part is usually
application/octet-stream, this doesn't work very well still
usually.
(reply_body): Make this deal better with multiparts.
* mail-format.c, mail-display.c: Now that we're not limited to
a single GtkHTML for the display, there's no reason to embed
Bonobo objects for unrecognized content-types in GtkHTML rather
than embedded them into the vbox directly. So do that.
Meanwhile, fix up the handler-selection code so that we can
declare which built-in handlers are more desirable than external
handlers and which are less. (Of course, eventually we'll want
this to be customizable.) Add some cleverness to
handle_multipart_alternative as well so it doesn't accept an
alternative which we can display generically over one we can
display specifically.
* mail-format.c (text_to_html): add a convert_space_hack flag,
which turns N spaces into N-1 s and a space.
(handle_text_plain): Check for "format=flowed" in the
Content-Type.
(handle_text_plain_flowed): Spinoff of handle_text_plain to deal
with RFC 2646 flowed text. (All the examples I can find of it
are generated by Eudora, but it's a pretty cool idea that ought
to be used more widely.)
2000-04-23 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c: rename "send" to "send_msg", to avoid
name clash with the tcp function. Connect the "forward" button.
* mail-ops.c: rename "send" to "send_msg", to avoid name clash
with the tcp function. Add forward_msg function.
* mail-format.c (mail_generate_forward): support function for
forward_msg. Pretty much a big kludge right now, pending the
attachment/attachment-bar changes.
2000-04-22 Dan Winship <danw@helixcode.com>
* mail-display.c (on_url_requested): Change cid expectations to
match current camel reality.
* main.c (main): call glade_gnome_init, for composer.
* folder-browser-factory.c: move msg_composer_cb and
msg_composer_send_cb to mail-ops. Attach send, reply, and "reply
to all" buttons.
* mail-ops.c (composer_send_cb, send): moved from
folder-browser-factory.c.
(reply_to_sender, reply_to_all): new functions to do replies.
* mail-format.c (text_to_html): Add an "add_pre" flag, to make
it wrap the output in <pre></pre>.
(mail_generate_reply): New function to create a composer and build
a reply in it.
2000-04-21 Dan Winship <danw@helixcode.com>
* mail-display.c (on_url_requested): deal with cid: URLs.
(find_cid): helper routine for above. (This could be much better.)
(mail_display_init): connect url_requested signal
* mail-format.c (handle_multipart_related): Make this work.
* mail-display.c (mail_display_set_message): ref the message we
display, since we're going to unref it when we remove it. Fixes a
bug that showed up with the new camel code, but it's not obvious
if it's due to a bug or a feature in the new code.
2000-04-20 NotZed <NotZed@HelixCode.com>
* Makefile.am (evolution_mail_LDADD): Add libibex.la to link.
* message-list.h: Removed folder summary.
* message-list.c: Dont include folder-summary anymore.
(select_msg): Changed to use folder, not summary in
summary_get_message_info(). God this code is grotty.
(ml_value_at): Ditto.
(ml_value_at): Changed to use new interface. Hmm, this returns a
static variable, that seems wrong.
(message_list_set_folder): Remove folder summary.
(ml_row_count): Oops, remove some debug i put there.
2000-04-20 Dan Winship <danw@helixcode.com>
* mail-display.c: update for bonobo change, and remove a
now-unused variable.
2000-04-17 Chris Toshok <toshok@helixcode.com>
* message-list.c (on_row_selection_idle): new function, actually
calls select_msg.
(on_row_selection_cmd): register an idle instead of calling
select_msg directly. this fixes the lag before the row is
selected - selection is instantaneous now, with message loading
happening afterward.
* message-list.h: add row_to_select and an idle_id to the message
list to make the select_msg call happen in an idle func.
* message-list.c (message_list_init_renderers): no more
e_cell_set_editable. this info always comes from the model.
2000-04-14 Dan Winship <danw@helixcode.com>
* mail-format.[ch]: Moved from camel/camel-formatter, and changed
slightly. (More to come.)
* html-stream.[ch]: No longer necessary. mail-format uses
GtkHTMLStreamHandles directly.
* mail-display.[ch]: update for new message formatting code.
2000-04-14 Chris Toshok <toshok@helixcode.com>
* folder-browser-factory.c (control_activate): use
gnome_app_fill_toolbar_with_data, so we get the beautiful gnome
toolbar.
2000-04-14 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c (development_warning): Fix up the
warning message a bit.
(folder_browser_factory): Make the warning bypassable.
2000-04-12 Miguel de Icaza <miguel@gnu.org>
* main.c (main): Call e_cursors_init.
2000-04-10 Dan Winship <danw@helixcode.com>
* mail-ops.c (fetch_mail): use camel_movemail when fetching mail
from an mbox store. This leaves behind temp files for now,
because CamelMboxFolder::delete is too confused to use, and NotZed
is rewriting CamelMboxFolder, so I'm not going to bother to try to
fix it.
* mail-ops.c: Add some #includes for the non-HAVE_MKSTEMP case
2000-04-09 Matt Loper <matt@helixcode.com>
* folder-browser.c (folder_browser_new): set folder_browser->uri
to NULL, so that we know when to free it.
2000-04-07 Miguel de Icaza <miguel@gnu.org>
* message-list.c (states_pixmaps): Add more beautiful art from
Miggue, the Diego Rivera of the next millenium.
(message_list_init_header): Use the beautiful art.
* pixmaps: Miguel rediscovers the "transparent" concept.
2000-04-07 Matt Loper <matt@helixcode.com>
* folder-browser.c (folder_browser_destroy): Unref the shell
interface that we have a handle to.
* folder-browser-factory.c (control_destroy_cb): New function;
destroys a folder-browser when its control is destroyed.
(folder_browser_factory): Hook up to the above.
2000-04-07 Dan Winship <danw@helixcode.com>
* mail-ops.c: new file, for toolbar/menu callbacks
(fetch_mail): fetch mail. Doesn't do mbox locking. Many kludges.
* folder-browser-factory.c (control_activate): use new fetch_mail
function as the callback for the "New mail" icon. Rename check_cb
to random_cb.
* Makefile.am: don't build test-sources since the version in
CVS doesn't do much and once I've fixed it it won't be a separate
program. Add mail-ops.[ch].
2000-04-06 Miguel de Icaza <miguel@gnu.org>
* message-list.c: Stick pixmaps here.
* mail-display.c (embeddable_destroy_cb): Replaced C++ comments
with C comments.
* message-list.c (load_internal_images): New function, loads images.
(message_list_init_renderers): Load images, fix previous attempt
at loading images.
* Makefile.am (dist-hook): Added distribution of pixmaps.
* pixmaps: New directory, used to hold the XPMs we ship with.
* pixmaps/envelope-closed.xpm, pixmaps/envelope-open.xpm: Tigert's
envelopes incorporated.
2000-03-31 Miguel de Icaza <miguel@gnu.org>
* message-list.c (ml_value_at): Fix miss-used variable.
2000-04-01 Michael Meeks <michael@helixcode.com>
* folder-browser.c (folder_browser_properties_init): update to
new property (folder_browser_property_changed): kill.
(get_prop, set_prop): do the donkey work + make properly RW.
2000-03-31 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c (folder_browser_set_shell):
* folder-browser.c (folder_browser_new):
* message-list.c (on_row_selection_cmd, select_msg,
message_list_init, message_list_set_folder):
remove debugging printf()s that no longer seem useful
2000-03-29 Dan Winship <danw@helixcode.com>
* folder-browser-factory.c (control_activate): build a toolbar.
(control_deactivate): and hide it.
2000-03-27 Chris Toshok <toshok@helixcode.com>
* mail-display.c: quiet warnings when building in ../po
2000-03-26 Miguel de Icaza <miguel@gnu.org>
* folder-browser-factory.c (folder_browser_set_shell): Memory leak
fix.
2000-03-25 Dan Winship <danw@helixcode.com>
* message-list.c (select_msg, ml_value_at): update for summary
changes. Hey, neat, it really does make it more efficient.
2000-03-22 Christopher James Lahey <clahey@helixcode.com>
* .cvsignore: Updated .cvsignore.
2000-03-21 Matt Loper <matt@helixcode.com>
* mail-display.c: Minor cleanup & commenting.
* folder-browser-factory.c: Minor cleanup & warning elimination.
2000-03-21 bertrand <bertrand@helixcode.com>
* message-list.c (ml_value_at): display message size
2000-03-20 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Properly ref & sink the table and header models.
2000-03-14 Dan Winship <danw@helixcode.com>
* mail-sources.c: First cut at a mail source selection wizard.
Basically a rigged demo at this point. Doesn't use camel to get
its information, and is not yet complete or integrated with the
mail component. Did I mention that the code is ugly?
2000-03-13 bertrand <bertrand@helixcode.com>
* folder-browser-factory.c (folder_browser_set_shell):
for testing and demonstration purpose, immediately
register a fake service.
2000-03-12 bertrand <bertrand@helixcode.com>
* folder-browser-factory.c (folder_browser_factory_init):
name change.
(control_activate_cb): when the control is activated,
it merges its own UI with the remote UIHandler.
(control_add_menu): sample menu merging.
(folder_browser_factory): connect the control "activate" signal.
* evolution-mail.gnorba:
name changes
* folder-browser.h: added a reference to an
Evolution::Shell object.
* folder-browser-factory.c (folder_browser_set_shell):
(folder_browser_control_add_service_repository_interface):
(folder_browser_factory): the folder-browser control now
implements the Evolution/ServiceRepository interface.
2000-03-07 bertrand <bertrand@helixcode.com>
* folder-browser-factory.c (development_warning):
added a warning so that the user knows that this
version may crash his mails.
2000-03-05 bertrand <bertrand@helixcode.com>
* message-list.h: include a referrence to the parent
folder browser.
* message-list.c (ml_value_at): use the message summary
from the
* html-stream.c (html_stream_close): when the stream
is closed, set the html stream to NULL
(html_stream_write): don't write anything if the
html handle does not exist.
(html_stream_reset): implemented. close the current
html handle and begins a new html parser.
* session.c (session_store_new): use static exception
here.
2000-03-05 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Added a prototype message listing.
2000-03-04 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Set up the column headers properly.
* folder-browser.c: Show the folder_browser widget.
2000-03-04 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Define ml_duplicate_value and ml_free_value
correctly.
2000-03-04 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Use g_int_compare and g_str_compare as we should
be instead of g_int_equal and g_str_equal.
2000-03-04 bertrand <bertrand@helixcode.com>
* test-mail.c (main): replace the bonobo-active/gtk-main
by bonobo-main.
Include Gnorba headers.
(main): don't call the container creation routine
before we entered the main loop. Use idle for that.
2000-03-04 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Change this to use the ETable widget itself
instead of building it from all the parts.
2000-03-03 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Ref the table columns since we unref them at the
end.
2000-03-01 Ettore Perazzoli <ettore@helixcode.com>
* Makefile.am (INCLUDES): Add `$(top_srcdir)'. Also, the
`top_srcdir' includes must come first everything else to avoid
including installed headers instead of our fresh ones.
2000-02-28 NotZed <NotZed@HelixCode.com>
* Makefile.am (evolution_mail_LDADD): Fixed references to eutil.
2000-02-24 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Changed to match new e_table_simple interface.
2000-02-24 Dan Winship <danw@helixcode.com>
* message-list.c (message_list_set_folder): update for CamelFolder
changes
2000-02-24 Christopher James Lahey <clahey@helixcode.com>
* message-list.c: Changed this to not use the "x" and "y"
arguments to e-table-item.
2000-02-23 Matt Loper <matt@helixcode.com>
* message-list.c (message_list_set_folder): Check 'desc'riptions
of exceptions.
2000-02-22 bertrand <Bertrand.Guiheneuf@aful.org>
* message-list.c (message_list_set_folder):
fix to show a sample correct implementation.
2000-02-21 Matt Loper <matt@helixcode.com>
* Makefile.am: added -lunicode to evolution_mail_LDADD.
2000-02-21 Dan Winship <danw@helixcode.com>
* session.c (session_store_new): Pass a CamelAuthCallback
(evolution_auth_callback) to camel_session_new.
2000-02-21 Dan Winship <danw@helixcode.com>
* session.c (session_store_new): Update session_store_new to
deal with the fact that camel_session_get_store takes a
CamelException now. Doesn't actually do anything with the
exception yet, because nothing else does yet either.
2000-02-19 Matt Loper <matt@helixcode.com>
* .cvsignore: added test-mail.
2000-02-14 Miguel de Icaza <miguel@gnu.org>
* folder-browser.c (folder_browser_load_folder): New routine,
loads a camel folder.
(folder_browser_set_uri): redo.
* session.c: new file. Implements SessionStores to keep track of
a Session/Store tuple.
2000-02-13 Matt Loper <matt@helixcode.com>
* html-stream.c (html_stream_new): Second param of gtk_html_begin
should be "", not NULL.
(html_stream_new): gtk_html_parse() is deprecated, so the call was
removed.
* html-stream.h: HTMLStreamClass's parent changed to
CamelStreamClass, not CamelStream.
2000-02-11 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Add the e-text directory to the includes list.
* message-list.c: Change the call to e_cell_text_new, since
there's an added argument.
2000-02-09 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Added libetext as libetable depends on it.
2000-02-08 Iain Holmes <ih@csd.abdn.ac.uk>
* Makefile.am: Changed the order of the compilation so the CORBA stuff
was made before it was needed.
2000-01-19 Miguel de Icaza <miguel@gnu.org>
* Started work on the mail display engine.
* html-stream.c, html-stream.h: New files, they are CamelStreams
used to write to the GtkHTML widget.
