2001-07-26 JP Rosevear <jpr@ximian.com>
* src/libical/icalcomponent.c (icalcomponent_begin_component):
call pvl_next on i rather than itr.iter
2001-07-26 Damon Chaplin <damon@ximian.com>
* src/libical/icaltimezone.c (icaltimezone_convert_time): if from_zone
is NULL (i.e. it is a floating time), just return.
2001-07-25 Damon Chaplin <damon@ximian.com>
* src/libical/icaltimezone.c: accept an icaltimezone* of NULL for all
the public functions, since NULL is used to represent floating times.
2001-07-25 JP Rosevear <jpr@ximian.com>
* src/libical/icalparameter.c (icalparameter_as_ical_string): if
the property contains ':' or ';' put the value in quotes so it
parses correctly
2001-07-23 JP Rosevear <jpr@ximian.com>
* src/libical/icalparser.c: pass extra param to
icalparser_get_next_char
(icalparser_get_next_char): only use quote mode if the flag is set
2001-07-23 Damon Chaplin <damon@ximian.com>
* src/libical/icaltime.c (icaltime_day_of_year): changed so it doesn't
use mktime(). We are having problems because mktime() only works
post 1970.
2001-07-17 JP Rosevear <jpr@ximian.com>
* src/libical/icaltimezone.c
(icaltimezone_get_tznames_from_vtimezone): do not strdup a NULL
(valid) timezone
2001-07-16 Damon Chaplin <damon@ximian.com>
* src/libical/icaltimezone.c
(icaltimezone_get_location_from_vtimezone): return NULL if we
couldn't find the LOCATION.
(icaltimezone_get_utc_offset): ifdef'd out a debugging message.
(icaltimezone_get_location):
(icaltimezone_get_latitude):
(icaltimezone_get_longitude): don't load the builtin timezone for
these. We should already have the data from reading zones.tab.
(icaltimezone_get_builtin_timezone_from_tzid): return NULL if the
TZID given is NULL or "" (i.e. a floating time).
2001-07-10 Peter Williams <peterw@ximian.com>
* src/libicalss/Makefile.am (libicalss_la_SOURCES): Add the
COMBINEDHEADERS here and remove the EXTRA_DIST. This fixes distcheck.
We can't just put CONBINEDHEADERS at the bottom of _SOURCES because
of the $(srcdir).
2001-07-11 Damon Chaplin <damon@ximian.com>
* src/libical/icaltimezone.c: only create the timezones array when we
need to, and make sure we free things when necessary.
Also added timezones_sorted variable, which we set to 0 when adding a
timezone. We then sort the array before doing binary searches (oops!)
* src/libical/icaltimezone.[hc]: added free_struct() arg to
icaltimezone_free() to specify whether to free the icaltimezone struct.
Also added icaltimezone_array_free() function.
2001-07-10 Damon Chaplin <damon@ximian.com>
* src/libical/icaltimezone.c (icaltimezone_convert_time): don't convert
DATE values.
* src/libical/icaltime.c (icaltime_from_timet_with_zone):
(icaltime_as_timet_with_zone): changed so they do not convert DATE
values according to the timezone.
* src/libical/icaltime.[hc]: added icaltime_current_time_with_zone()
and icaltime_today() functions.
2001-07-09 Damon Chaplin <damon@ximian.com>
* src/libical/icaltime.c (icaltime_adjust): forgot to compile before
committing. Idiot.
2001-07-09 Damon Chaplin <damon@ximian.com>
* src/libical/icaltimezone.c (icaltimezone_convert_time): if the 2
zones are the same just return.
* src/libical/icaltime.c (icaltime_adjust): normalize the month.
2001-07-03 Damon Chaplin <damon@ximian.com>
* src/libical/icalcomponent.c (icalcomponent_add_component): add the
icaltimezone to the timezone array of the toplevel VCALENDAR component.
2001-07-03 Damon Chaplin <damon@ximian.com>
* src/libical/icalcomponent.c (icalcomponent_merge_component): fixed
bad assertion, '!=' -> '=='.
(icalcomponent_merge_vtimezone): get the TZID from vtimezone, not comp.
2001-07-03 Damon Chaplin <damon@ximian.com>
* src/libical/icaltime.c:
* src/libical/icalcomponent.c: more timezone stuff.
2001-06-28 Peter Williams <peterw@ximian.com>
* zoneinfo/Makefile.am (dist-hook): Add $(srcdir) as in install-data-local
rule.
2001-06-28 Damon Chaplin <damon@ximian.com>
* configure.in: commented out AC_DEFINE(ICAL_ERRORS_ARE_FATAL,1).
We only want it to abort when there is no possibility of carrying on.
2001-06-26 Damon Chaplin <damon@ximian.com>
* zoneinfo/*: stripped all blank lines from iCalendar files.
Apparently they aren't exactly legal. Oops.
2001-06-15 JP Rosevear <jpr@ximian.com>
* zoneinfo/Makefile.am: Extra dist the zones.tab information
2001-06-14 Damon Chaplin <damon@ximian.com>
* src/libical/icaltimezone.c (icaltimezone_get_latitude):
(icaltimezone_get_longitude): added functions to get the coords of
builtin timezones.
2001-06-13 Damon Chaplin <damon@ximian.com>
* src/libical/icalrecur.c: merged in some new stuff from libical CVS.
(icalrecur_add_byrules): If no sign is given set sign to 1 (i.e.
default to positive).
(icalrecur_iterator_new): when setting up the year days array, handle
the case where a year has no occurrences and we have to skip it.
Also initialize the last.day and last.month fields.
(expand_by_day): set the last day of the year explicitly rather than
adding 1 to year and subtracting 1 from day. It is more efficient,
and less prone to bugs. Also rewrote a bit.
(expand_year_days): added code to handle BY_MONTH_DAY and BY_DAY +
BY_MONTH_DAY, and rewrote code to handle BY_DAY + BY_MONTH.
(next_year): handled the case where there are no occurrences in the
year.
* src/libical/icaltime.c (icaltime_adjust): new function to adjust a
time by a number of days/hours/minutes/seconds.
(icaltime_day_of_week): rewrote using a single call to mktime().
(icaltime_day_of_year): rewrote using a single call to mktime().
(icaltime_from_day_of_year): rewrote in a simpler way. The old version
had a bug in it.
* src/libical/icaltime.h (struct icaltimetype): added is_daylight
flag, so we can try to distinguish between standard and daylight time
when the clocks go back. Though this doesn't always resolve the
ambiguity.
* src/libical/icalcomponent.c: added some stuff to handle timezone
data connected to the calendar component. Unfinished.
* src/libical/icalyacc.y: merged in a fix from sourceforge CVS version
of libical, so we can handle -ve UTC offsets.
* src/libical/Makefile.am (CPPFLAGS): added PACKAGE_DATA_DIR define
for finding the VTIMEZONE files.
(libical_la_SOURCES): added icalarray.[hc] and icaltimezone.[hc].
(COMBINEDHEADERS): added icalarray.h and icaltimezone.h to the headers
to be combined into ical.h.
2001-06-13 Damon Chaplin <damon@ximian.com>
* src/libical/icaltimezone.[hc]: new files to contain support for
timezones.
* src/libical/icalarray.[hc]: new files to provide a simple expanding
array datatype.
2001-06-13 Damon Chaplin <damon@ximian.com>
* Makefile.am (SUBDIRS): added zoneinfo.
* configure.in (AC_OUTPUT): added zoneinfo/Makefile.
* zoneinfo/Makefile.am: new file to install & distribute the
VTIMEZONE data files, and the zones.tab file.
* zoneinfo/zones.tab: new file containing a list of all timezones
and their coordinates (so we can mark them on the world map).
* zoneinfo/*: Lots of VTIMEZONE data files added, one per timezone.
2001-05-16 JP Rosevear <jpr@ximian.com>
* src/libical/Makefile.am: Fixes to make it make dist and make
distcheck. Kind of kludgy but they seem to work. Time will tell.
2001-05-10 JP Roseveaer <jpr@ximian.com>
* src/libical/icaltime.c (set_tz, unset_tz): plug leak
(icaltime_as_timet): use altered functions
(icaltime_utc_offset): ditto
(icaltime_from_day_of_year): ditto
2001-05-02 JP Rosevear <jpr@ximian.com>
* src/libical/icalparser.c (icalparser_new): initialize
"continuation_line" to 0
2001-04-18 Ettore Perazzoli <ettore@ximian.com>
* src/Makefile.am (SUBDIRS): Don't compile the Python stuff nor
the tests for now; they are broken.
2001-04-18 Ettore Perazzoli <ettore@ximian.com>
* src/libicalss/Makefile.am (COMBINEDHEADERS): All of these have
to come from the srcdir: prepend `$(srcdir)'.
2001-04-18 Ettore Perazzoli <ettore@ximian.com>
* src/libical/Makefile.am (COMBINEDHEADERS): Shouldn't prepend
`$(top_builddir)/src/libical' to `icalderivedvalue.h',
`icalderivedparameter.h', `icalderivedproperty.h' here, that
confuses the dependencies for make.
* src/libical/Makefile.am (ical.h): Depend on
`$(COMBINEDHEADERS)', not `$(BUILT_SOURCES)'.
2001-04-01 Eric Busboom <eric@softwarestudio.org>
* icalcomponent.h Changed meaning of
icalcomponent_new_from_string. It used to create a new component
given the text name of the component type to create. Now it calls
icalparser_parse_string to create a new component from the
complete iCalendar text representation of the component.
2001-03-31 Eric Busboom <eric@softwarestudio.org>
* icalvalue Changed ACTION properties to take an ACTION value
instead of TEXT. The ACTION value is enumerated.
2001-03-26 Eric Busboom <eric@softwarestudio.org>
* icalparameter.h icalparameter_rsvp_* routines now take, return
ICAL_RSVP_TRUE and ICAL_RSVP_FALSE, not 0 and 1
2001-03-25 Eric Busboom <eric@softwarestudio.org>
* icalrecur.c Many changes to get YEARLY rules working and fix
other errors. Recurrences are stil broken, but more types of rue
now work.
2001-03-16 Eric Busboom <eric@softwarestudio.org>
* icalparameter.c Changed icalparameter_new_from_string() to
icalparameter_new_from_value_string(). Created new
icalparameter_new_from_string() that takes strings of
form"PARAMNAME=PARAMVALUE"
* *_XNAME changes all _XNAME enumerations to _X
* derived props, values, parameters. Seperated out derived
proeprties, parameters and values into their own files. This makes
it easier to auto generate all of the enumerations for values,
parameters and proeprties.
* icalenum.h Major changes to icalenum. Movel all of the
icalenum_* values to other modules, and changed the names. Look
for #defines in icalenum.h tying the old name to the new
name. Also moved all of the enumerations into other files.
2001-02-26 Eric Busboom <eric@softwarestudio.org>
* src/libical/icalproperty.c Added
icalproperty_set_parameter_from_string and
icalproperty_set_value_from_string to aid in binding to Python
2001-02-15 Eric Busboom <eric@softwarestudio.org>
* design-data/prop-to-value.txt Made a new CSV file,
properties.cvs That collects property-to-value and default value
information
* src/libical/icalproperty.{c,h}.in Moved auto generated code into
icalderivedproperty.{c,h} and created icalderivedproperty.{c,h}.in
2001-02-14 JP Rosevear <jpr@ximian.com>
* src/libical/Makefile.am: Sigh, automake is dumber than i thought
2001-02-12 JP Rosevear <jpr@ximian.com>
* src/test/Makefile.am: link with the static versions
* src/python/Makefile.am: use include dir discovered in configure checks
* src/python/.cvsignore: shush
* src/libical/icalrestriction.c: remove autogenerated file
* src/libical/Makefile.am: the generated files are now disted so
look for them in the source dir rather than the build dir
* src/Makefile.am: Only build the python dir if all the configure
stuff checked out
* configure.in: Remove shared library disabling and add a python
check and allow for the python bindings to not be built
2001-02-11 Eric Busboom <eric@softwarestudio.org>
* src/python/Makefile.am Tweaked makefile to use automake more,
but it stil isn't quie right.
2001-02-09 JP Rosevear <jpr@ximian.com>
* Shush cvs
2001-02-09 JP Rosevear <jpr@ximian.com>
* src/libical/Makefile.am: Slightly over zealous during the merge
2001-02-09 JP Rosevear <jpr@ximian.com>
* src/libical/Makefile.am: Correct typo
* Removal of more auto generated files
2001-02-09 JP Rosevear <jpr@ximian.com>
* Removal of various auto generated files
2001-02-09 JP Rosevear <jpr@ximian.com>
* src/libical/icalparameter.c.in (icalparameter_new_from_string):
its NEEDS-ACTION rather than NEEDSACTION
(icalparameter_as_ical_string): ditto
2001-02-09 Eric Busboom <eric@softwarestudio.org>
* python Added src/python directory. Inserted SWIG wrapper files,
and a simple interface to Component, Time, Duration, Period and
Store.
* icallangbind.c More experimental work
* icalduration.{c,h}, icalperiod.{c,h} Broke out period and
duration types into their own files
2001-02-06 Christopher James Lahey <clahey@ximian.com>
* src/libical/icallangbind.c: Added a missing #include here.
* src/libical/icalrecur.c (icalrecur_add_bydayrules): Copy the
passed in const vals since we change it.
2001-02-06 Eric Busboom <eric@softwarestudio.org>
* icaltime.c Changed icaltime_from_day_of_year to run mktime in
the UTC timezone. This fixed a bug where it would return one day
eariler for some timezones.
2001-02-05 Ettore Perazzoli <ettore@ximian.com>
* src/libical/Makefile.am (COMBINEDHEADERS): `icalvalue.h',
`icalparameter.h', `icalproperty.h' and `icalrestriction.h' are
created in the builddir so they shouldn't be prefixed with
`$(top_builddir)/src/libical'.
2001-01-26 Eric Busboom <eric@softwarestudio.org>
* icalproperty.c.in Improved icalproperty_as_ical_string() to
eliminate the possibility of having a VALUE parameter that does
not match the actual kind of value.
* icalvalue.c.in made icalvalue_*_trigger() and
icalvalue_*_datetimeperiod non-autogenerated. These routines were
for combined value type -- non standard values that can have more
than on standard value type. These non-standard types now delegate
to stadard types.
2001-01-24 Dan Winship <danw@helixcode.com>
* src/libical/icaltime.c: Remove unused "extern long timezone".
2001-01-24 Eric Busboom <eric@softwarestudio.org>
* icalfileset.c fixed icalfileset_read-from_file so it will handle
lines longer than 80 char properly.
2001-01-23 JP Rosevear <jpr@ximian.com>
* configure.in: Don't AC_INIT on an autogenerated file that does not
exist beforehand
2001-01-23 Eric Busboom <eric@softwarestudio.org>
* icltime.c Removed all of the _local_ routines and simplified
icaltime_utc_offset and icaltime_as_timet
* regression.c Added tests for triggers and improvements to icaltime.c
* icaltypes.c Addedd icaltriggertype_from_string and changed
icaltriggertype to be a struct
2001-01-22 Eric Busboom <eric@softwarestudio.org>
* icaltime.c implemented icaldurationtype_from_string to parse the
string it self, rather than use lex/yacc
2001-01-15 Eric Busboom <eric@softwarestudio.org>
* icalfileset.c Many improvements. File locking now works, and so
does searching with icalfileset_select()
2001-01-08 Eric Busboom <eric@softwarestudio.org>
* Makefile.am Remove spaces after -I in several
Makefile.am routines.
* icalset.c removed return statements from some void functions.
* icalparameter.c.in Added break to default: case that had no
body. Compilers on Solaris and Tru64 UNIX complained.
2001-01-02 Eric Busboom <eric@softwarestudio.org>
* icaltime.c Changed icaldurationtype_from_time and _as_timet to
_from_int and _as_int. This is a change interface that may break
some code.
* icalgauge.c icalgaugeimpl.h, icalgauge.h., Rewrote gauge code to
use pvl-lists directly, instead of trying to reuse icalcomponent.
2000-12-15 Ettore Perazzoli <ettore@helixcode.com>
* src/libical/Makefile.am: Build `libical-static.la'.
2000-12-14 Ettore Perazzoli <ettore@helixcode.com>
* src/libical/Makefile.am (ical.h):
2000-12-13 Federico Mena Quintero <federico@helixcode.com>
* src/libical/icaltime.c (icaltime_from_timet): Use gmtime()
unconditionally, since we want an UTC broken-down representation.
(icaltime_as_timet): Add the offset only if the time was supposed
to be in UTC; that way mktime() will get a proper localtime as
source data.
2000-12-13 Federico Mena Quintero <federico@helixcode.com>
* src/libical/icaltime.c (icaltime_from_timet): time_t values
*are* in UTC by definition, so the is_utc argument is useless.
Removed the conversion to UTC and made the icaltimetype.is_utc be
TRUE always. This breaks libical's owne internal use of this
function, but since we do not use any of the functions that use it
that way, we can ignore this. This is basically a temporary
measure until libical does the right thing.
2000-12-12 Eric Busboom <eric@softwarestudio.org>
* icalparser.c Addedd support for x-parameters.
* icalenum.c Fixed icalenum_parameter_type_to_string and
icalenum_property_type_to_string to property identify X- parameers
and properties.
* icalparameter.c Fixed icalparameter_as_ical_string to property
write out X-Parameters.
2000-12-13 Christopher James Lahey <clahey@helixcode.com>
* src/libical/icalerror.h: Added a name to the parameter to
icalerror_set_errno.
2000-12-12 Eric Busboom <eric@softwarestudio.org>
* icalparser.c Addedd support for x-parameters.
* icalenum.c Fixed icalenum_parameter_type_to_string and
icalenum_property_type_to_string to property identify X- parameers
and properties.
* icalparameter.c Fixed icalparameter_as_ical_string to property
write out X-Parameters.
2000-12-11 Eric Busboom <eric@softwarestudio.org>
* icalcstp.c added empty bodies to prep_* routines so that shared
libraries would build.
2000-12-13 Federico Mena Quintero <federico@helixcode.com>
* src/libical/Makefile.am (COMBINEDHEADERS): Removed the explicit
paths. Why it did *not* work on my original try when they were
not there, well, now I don't know.
2000-12-13 Ettore Perazzoli <ettore@helixcode.com>
* src/libicalvcal/Makefile.am (INCLUDES): Add
`$(top_builddir)/src/libical' to the include directory list.
* src/libical/Makefile.am (icalparameter.h): Use `$(srcdir)'.
(icalparameter.c): Likewise.
(icalproperty.h): Likewise.
(icalproperty.c): Likewise.
(icalvalue.h): Likewise.
(icalvalue.c): Likewise.
(icalrestriction.c): Likewise.
(CLEANFILES): Add `icalparameter.h', `icalparameter.c',
`icalproperty.h', `icalproperty.c', `icalrestriction.c',
`icalvalue.h', `icalvalue.c'.
(COMBINEDHEADERS): `icalvalue.h', `icalparameter.h' and
`icalproperty.h' are in builddir, not srcdir, so fix the list to
use `$(top_builddir)' instead of `$(top_srcdir)'.
(all): Removed.
(BUILT_SOURCES): Move `ical.h' here instead.
(ical.h): Don't depend on `(BUILT_SOURCES)'; this a built source
itself.
2000-12-12 Joe Shaw <joe@helixcode.com>
* src/libical/icalrecur.c: #if 0ed out some #if 1ed test code that
was breaking my build by #including ical.h. No cookie!
2000-12-12 Dan Winship <danw@helixcode.com>
* configure.in: Add a check for "extern int timezone;" vs struct
tm tm_gmtoff, stolen from Evolution's configure.in.
* src/libical/icaltime.c (icaltime_utc_offset,
icaltime_local_utc_offset): Use HAVE_TIMEZONE, add tm_gmtoff
support.
* src/libical/icallexer.l: Remove ical_yy_scan_buffer, ..._string,
and ..._bytes prototypes, since it compiles fine without them on
Linux, and bombs out due to prototype mismatch on my NetBSD box.
2000-12-11 Federico Mena Quintero <federico@helixcode.com>
* Makefile.am:
* configure.in: Disable compilation of the examples directory
until libicalss is fixed.
* configure.in: Make AC_INIT() check for a file that is not
autogenerated!
* configure.in: Added check for Perl.
2000-12-11 Federico Mena Quintero <federico@helixcode.com>
* configure.in (AC_OUTPUT): Fixed order of generated files to make
"make distcheck" work. Turn on AM_MAINTAINER_MODE.
* src/libical/Makefile.am (EXTRA_DIST): Add icalversion.h.in.
(COMBINEDHEADERS): Added paths to make "make distcheck" work.
(libical_la_SOURCES): Added headers for distribution in our weird
setup.
2000-12-11 JP Rosevear <jpr@helixcode.com>
* src/libical/icaltime.c (icaltime_compare_date_only): New
function that compares only the dates, not the times as well.
* src/libical/icaltime.h: Add prototype for the function above.
* src/libical/icalrecur.h (struct icalrecurrencetype): Correct
header documentation.
* src/libical/icaltypes.c: No longer include <limits.h>.
* src/libical/icalrecur.c: Likewise.
* src/libical/icalvalue.c.in: Likewise.
* src/libical/icalyacc.y: Likewise.
2000-12-06 Eric Busboom <eric@softwarestudio.org>
* icaltime.c added icaltime_as_local to convert a UTC time to a
local time
* icaltime.h icaltime.c Removed is_utc argument from
icaltime_from_timet
2000-11-29 Eric Busboom <eric@softwarestudio.org>
* icalrecur.c More testing and bug fixes. Many more of the rules
in recur.txt work correctly.
2000-11-28 Eric Busboom <eric@softwarestudio.org>
* icalrecur.c Several changes to extract icalrecur.c from
libical. I'd like to make it into a reference impl for recurrence
rules. CHanges include moving all of the recurrence type and
recurrence enums from icalenum and icaltypes into icalrecur, and
adding code to parse recurrence rule strings.
* icaltime.c Changed icaltime_from_string to parse the string
directly. Now icaltime.c has no dependency on icalvalue.c
2000-11-21 Eric Busboom <eric@softwarestudio.org>
* icalrecur.c Fixed a bug in the increment_* routines that made
incrementing by more then 1 insensible. Thanks to Martin Neimeier
2000-11-20 Eric Busboom <eric@softwarestudio.org>
* icalmessage.c Many routines to create new ical messages.
* icalspanlist.c Code to generate a list of the busy time f the
VEVENTS in a set. Also includes routiens to generate free and busy
lists from the spanlist, and to find the next free time after a
given time.
* icalvalue.c The STATUS property now has its own value type,
STATUS, which holds the enumeration icalproperty_status.
* icalrestriction.c Added more restrictions. Now handles mutual
and exclusive consitions, and checks for the reight values in
STATUS properties
2000-11-10 Eric Busboom <eric@softwarestudio.org>
* icaltypes.c Added routine to create durationtype from string:
icaldurationtype_from_string
2000-11-09 Eric Busboom <eric@softwarestudio.org>
* icalcomponet.c Add sever get/set convienience routines to access
and manipulate common component propoerties from the component
interface. This eliminates the need to create a lot of temporary
variables if you just want to change the start time of and event.
2000-11-06 Eric Busboom <eric@softwarestudio.org>
* icalcomponent.c Added new routines to icalcomponent:
_get_span -- returns the start and end times of the event in UTC
_get_first_real_component -- return ref to VTODO, VEVENT or VJOURNAL
* icalspanlist.c Added new class, icalspanlist, that generates a
list of alternating busy and free times from an icalset. The class
includes routines to gnerate rfc2445 busy and free lists, and to
get the next avaliable busy or free time after a given time.
2000-11-06 Federico Mena Quintero <federico@helixcode.com>
* src/libical/icalvalue.c (icalvalue_recur_as_ical_string): Handle
both the position and weekday in the by_day field.
2000-10-20 Jesse Pavel <jpavel@helixcode.com>
* src/libical/icalproperty.c: added support for the
icalproperty_remove_parameter() function.
2000-10-20 Eric Busboom <eric@agony.busboom.org>
* Const correctness. Added 'const' all over everywhere.
2000-10-19 Eric Busboom <eric@agony.busboom.org>
* icalproperty, icalparameter, icalvalue .c, .h Changed most
instances of char* to const char*
* icalclassify.h Added multiple include protection
* icalset.h and others, got rid of parameter named "new"
2000-10-15 Eric Busboom <eric@softwarestudio.org>
* icalcomponent Added convienience functions for constructing
components: icalcomponent_new_vcalendar(), etc.
* Makefile.am Incorporated build system patch from Federico
Quintero. Misc small fixes and cleanup
* scripts Incorporated auto-gen patch from Frederico. Generated
code in libical now uses icalproperty.c.in (etc) instead of
editing file icalparoperty.c in place.
* libical. Changed flex/bison to use the -P/-p options to set
ical_yy as a prefix. Removed prefix redefinition from icalyacc.y
2000-10-12 Eric Busboom <eric@softwarestudio.org>
* icalproperty.c Fixed icalproperty_get_{first,next}_parameter to
honor the parameter kind argument
* icalparameter.c Added, but did not complete, a new version of
icalparameters_from_string that does not use the hairy nested
case/switch statements of the previous version
2000-10-11 Damon Chaplin <damon@helixcode.com>
* src/libical/icalparameter.c (icalparameter_as_ical_string):
(icalparameter_new_from_string):
* src/libical/icalparser.c (icalparser_add_line): add support for
'X-' parameters.
2000-10-07 Dan Winship <danw@helixcode.com>
* src/libical/icalyacc.y (weekday_list): Fix the semicolons in
this rule. Noticed by x-virge.
* src/test/Makefile.in: While I'm here, remove this from CVS, as
it's a generated file.
2000-10-02 Eric Busboom <eric@softwarestudio.org>
* ical.h ical.h and icalss.h now are concatenations of all of the
public headers for their respective libraries. Thus, only ical.h,
icalss.h and icalvcal.h need to be installed.
2000-09-12 Ettore Perazzoli <ettore@helixcode.com>
* configure.in: AC_OUTPUT the Makefile in `src' before the stuff
in its subdirs.
2000-09-12 JP Rosevear <jpr@helixcode.com>
* test-data/stresstest.ics: Merge missing file for distcheck
* src/libicalss/icalcstp.h: ditto
* src/libicalss/icalcsdb.h: ditto
2000-09-11 Eric Busboom <eric@softwarestudio.org>
* icalvcal.c Added more comments
2000-09-01 JP Rosevear <jpr@helixcode.com>
* configure.in: We don't need AC_PROG_RANLIB and
AM_PROG_LIBTOOL
* src/libical/icalyacc.y (clear_recur): Explicitly
set the week_start to the Monday default in case the
recurrence rule does not.
2000-08-31 JP Rosevear <jpr@helixcode.com>
* Kill off more old, dead files
2000-08-31 JP Rosevear <jpr@helixcode.com>
* MacOS: This dir is not in 0.19
2000-08-31 JP Rosevear <jpr@helixcode.com>
* src/libical/CHANGES: This file is not in 0.19
2000-08-31 JP Rosevear <jpr@helixcode.com>
* src/libical/.gdb_history: Kill file
* src/libical/.gdb_history: Kill file
2000-08-31 JP Rosevear <jpr@helixcode.com>
* src/pvl/Makefile: Kill old file
* src/test/usecases.c: Kill old file
* src/test/.cvsignore: Update
* src/libicalvcal/.cvsignore: Update
* examples/.cvsignore: Shut up
2000-08-31 JP Rosevear <jpr@helixcode.com>
* configure.in: Don't list config.h in AC_OUTPUT
2000-08-26 Ettore Perazzoli <ettore@helixcode.com>
* examples/Makefile.am (INCLUDES): More `$(srcdir)' loving.
* src/libicalvcal/Makefile.am (INCLUDES): Add `-I
$(srcdir)/../libical' for builddir != srcdir loving.
2000-08-25 Christopher James Lahey <clahey@helixcode.com>
* examples/access_properties_and_parameters.c,
src/libicalvcal/vcc.y: Got rid of some warnings.
* src/libicalvcal/vcc.c: Checking in generated C file.
2000-08-25 Christopher James Lahey <clahey@helixcode.com>
* src/libical/icalcomponent.c: Fixed an incorrect struct name.
2000-08-25 Peter Williams <peterw@helixcode.com>
* src/libical/icalcomponent.c (icalcomponent_end_component): Compile fix;
use icalerror_check_arg_re so we can return an valid icalcompiter.
(icalcomponent_begin_component): Same.
2000-08-24 JP Rosevear <jpr@helixcode.com>
* src/libical/icalvcal.h: Remove this duplicate file to fix build
2000-08-24 Federico Mena Quintero <federico@helixcode.com>
* src/test/Makefile.am: Make it work.
2000-08-04 Eric Busboom <eric@softwarestudio.org>
* stow.c Changed stow to write data to a file ( icalfileset) not a
calendar. Also added MIME parsing capability
* sspm.c Core of the mime processor. Now handles quoted-printable
and base64 encodings
* icalmime.h New file that parses mime data and returns an
icalcomponent that includes all of the parts.
2000-07-26 Eric Busboom <eric@softwarestudio.org>
* icaldirset.h misc bug fixes to get deleting components to work
* icalcomponent.h Eliminated internal use of _get_first_component
and _get_next_component, since these will reset the interal
iterators.
2000-07-23 Eric Busboom <eric@softwarestudio.org>
* icalcomponent.h Added external iterators to icalcomponent for
subcomponents: icalcompiter. These are still experimental, but they
seem to work OK and have a nice syntax
2000-07-18 Eric Busboom <eric@softwarestudio.org>
* icalset This is a new "superclass" for icalstore, icalcluster,
and others. It merges the interfaces of the old icalstore and
icalcluster
* icalstore.{c,h} CHanged name to icaldirset
* icalcluster.{c,h} Changed name to icalfileset
2000-06-12 Eric Busboom <eric@softwarestudio.org>
* icalstow.c misc improvements and bug fixes to make it useful.
2000-06-09 Eric Busboom <eric@softwarestudio.org>
* icalrecur.c More extensive code changes for recurrence rule.
* icalyacc.y Added support for integers in by day lists
2000-06-08 Ettore Perazzoli <ettore@helixcode.com>
* src/test/Makefile.am (INCLUDES): Likewise.
* src/libicalss/Makefile.am (INCLUDES): Use $(srcdir) to allow
builddir != srcdir.
2000-06-01 Eric Busboom <eric@softwarestudio.org>
* icalrecur.c moved recur code into new files
2000-05-30 Eric Busboom <eric@softwarestudio.org>
* icaltypes.c Extensive work on code to expand recurences
* icaltypes.h Changed signature icaltimetype_from_timet to include
is_utc flag.
2000-03-17 Eric Busboom <eric@softwarestudio.org>
* icalstore.c Vastly improved icalstore_test.
2000-03-16 Eric Busboom <eric@softwarestudio.org>
* icalcluster.c Added compile flag (ICAL_SAFESAVES) to switch how
icalcluster saves files during commits. When the flag is define,
it will write the data to a temorar file and rename the file to
the target file.
* storage.c Added seterate test suite for sotage components
* icalparser.c Created parser object, implemented line-oriented
parsering, and made message oriented parsing work in terms f line
oriented parsing.
* icalparser.c Fixed icalparser_get_line to remove \r in input.
