path: root/doc/C/usage-mail.sgml

<!--
<!DOCTYPE Chapter PUBLIC "-//GNOME//DTD DocBook PNG Variant V1.1//EN">
-->

<chapter id="usage-mail"> 
  <title>Evolution Mail</title>
  <abstract>
    <title> An Overview of the Evolution Mailer</title>
    <para>
       <application>Evolution</application> email is like other email
       programs in all the ways you would hope:
     <itemizedlist>
       <listitem>
     <para>
       It can sort and organize your mail in a wide variety of ways with
       folders, searches, and filters.
     </para>
       </listitem>
       <listitem>
     <para>
      It can send and receive mail in HTML or as plain text, and
      supports file attachments.
     </para>
       </listitem>
       <listitem>
     <para>
       It supports multiple mail sources, including <glossterm
       linkend="imap">IMAP</glossterm>, <glossterm
       linkend="pop">POP3</glossterm>, local
       <systemitem><filename>mbox</filename></systemitem> and
       <systemitem><filename>mh</filename></systemitem> files, and
       even NNTP data (newsgroups), which isn't technically email.
     </para>
       </listitem>
     </itemizedlist>
    </para>
    <para>
      However, <application>Evolution</application> has some important
      differences.  First, it's built to handle very large amounts of
      mail without slowing down or crashing.  Both the <link
      linkend="usage-mail-organize-filters">filtering</link> and <link
      linkend="usage-mail-organize-search">searching</link> functions
      were built for speed and efficiency on gargantuan mail
      volumes. There's also the <application>Evolution</application>
      <link linkend="usage-mail-organize-vFolders">vFolder</link>, an
      advanced organizational feature not found in other mail clients.
      If you get a lot of mail, or if you keep every message you get
      in case you need to refer to it later, you'll find that feature
      especially useful.
    </para>
  </abstract>

  <sect1 id="usage-mail-getnsend">
    <title>Reading, Getting and Sending Mail</title>

    <sect2 id="usage-mail-getnsend-read">
      <title>Reading Mail</title>
      <para>
       You can start reading email by clicking
       <guibutton>Inbox</guibutton> in the shortcut bar.  By
       default, the <interface>Inbox</interface> is open when you
       start <application>Evolution</application>, and the first
       time you see your Inbox, there's a message in it from Helix
       Code welcoming you to the application.
      </para>
      <para>
    The <application>Evolution</application>
    <guilabel>Inbox</guilabel>, should look like the one in <xref
    linkend="usage-mail-intro-fig">, which has a message from
    Helix Code. The message summary appears at the top, in the
    <interface>message list</interface>.  The message itself is
    displayed below that, in the <interface>view pane</interface>.
    If you find the <interface>view pane</interface> too small,
    you can double-click on the message in the <interface>message
    list</interface> to have it open in a new window.  Just like
    with folders, you can right-click on messages in the message
    list and get a menu of possible actions.
     </para>

 <!-- ==============Figure=================================== -->
 
      <figure id="usage-mail-intro-fig">
      <title>Evolution Mail</title>
      <screenshot>
        <screeninfo>Inbox</screeninfo>
        <graphic fileref="fig/mail-pic" format="png" srccredit="Aaron Weber">
    </graphic>
    </screenshot>
      </figure>
<!-- ==============End of Figure============================== -->

      <para>
         Most of the mail-related actions you'll want to perform are
         listed in the <guimenu>Message</guimenu> menu in the menu
         bar.  The most frequently used ones, like
         <guimenuitem>Reply</guimenuitem> and
         <guimenuitem>Forward</guimenuitem>, also appear as buttons in
         the toolbar.
       </para>
       <para>
         While you're there, have a look at the items items the bottom
         of the list, which are shortcuts for simple filter and
         vFolder creation.  You can learn more about filters and
         vFolders in <xref linkend="usage-mail-organize">; a
         comprehensive description of this menu (and all the others)
         is in <xref linkend="menuref">.
      </para>

      <sect3 id="usage-mail-listorder">
    <title>Sorting the message list</title>
    <para>
          You can also select the order in which messages appear in
          that list.  To sort by sender, subject, or date, click on the
          bars with those labels at the top of the message list.  If
          you click twice, you'll sort them in reverse order.
        </para>
    <para>
          Aside from sorting the messages, you can opt to have the
          messages threaded. Select <menuchoice>
          <guimenu>View</guimenu> <guimenuitem>Threaded</guimenuitem>
          </menuchoice> to turn the threaded view on or off.  If the
          option selected, <application>Evolution</application> will
          attempt to associate related messages by using the
          <systemitem>References</systemitem>,
          <systemitem>In-Reply-To</systemitem>, and
          <systemitem>Subject</systemitem> message headers.  Messages
          which are related are then placed next to each other, so
          that it's easier to follow the thread of a conversation from
          message to message.
        </para>
      </sect3>
      <sect3 id="usage-mail-getnsend-delete">
        <title>Deleting Mail</title>
        <para>
          To delete a message, select it in the the <interface>message
          list</interface> by clicking on it once.  Then click on the
          <guibutton>Delete</guibutton> button in the tool bar.  The
          message now has a line through it, because you've marked it
          for deletion. 
        </para>
        <para>
          If you really want to get rid of it, choose
          <guimenuitem>Expunge</guimenuitem> from the
          <guimenu>Folder</guimenu> menu.  That will delete it
          permanently. If you want to keep it, click
          <guibutton>Delete</guibutton> again, and it will no longer
          be marked as deleted.  At some point in the future, this
          feature will change to something a little less
          counter-intuitive.
        </para>
      </sect3>
    </sect2>

    <sect2 id="usage-mail-getnsend-get">
      <title>Checking Mail</title>
      <para>
    Now that you've had a look around the
    <interface>Inbox</interface>, it's time to check for new mail.
    Before you get it, though, you should decide where you want to
    keep it.  Your options will vary a little depending on your
    network setup, but they come down to storing the mail on your
    hard disk (using <glossterm linkend="pop">POP</glossterm>), or
    storing it on the network (using <glossterm
    linkend="imap">IMAP</glossterm>).  If you store your mail on
    your local hard disk, you can read it whether you're online or
    not, but you can only read it from one computer.  If you store
    it on the network, you can only read it when you're online,
    but you can access it from almost any computer with a network
    connection, even if it doesn't have
    <application>Evolution</application>.
      </para>
      <para>
        If you choose POP, you'll be putting mail in the
        <guilabel>Inbox</guilabel> in the <guilabel>Local</guilabel>
        folder.  If you choose IMAP, it's the
        <guilabel>Inbox</guilabel> of a folder with the same name as
        your mail server.  That's so you can maintain several distinct
        IMAP servers if you want.  See <xref
        linkend="config-prefs-mail"> for more information about mail
        servers.
      </para>
      <para>
        Regardless of where you keep your mail, you can click
    <guibutton>Get mail</guibutton> in the toolbar to check your
    mail.  The first time you do that, the <interface>mail setup
    assistant</interface> will ask you for the information it
    needs to check your mail (see <xref
    linkend="config-setupassist"> for more information).  If
    you're checking mail over a network (instead of from local
    <systemitem><filename>mbox</filename></systemitem> files),
    you'll need to enter your email password.  Type it in, click
    <guibutton>OK</guibutton> and
    <application>Evolution</application> will download your mail.
    New mail will appear in your <interface>Inbox</interface>.
      </para>
      <para>
        Once you've entered your password,
        <application>Evolution</application> will hold it in memory so
        that you don't have to retype it every time you want to check
        mail.  It will only remember the password until you quit the
        application; each time you run
        <application>Evolution</application>, you need to re-enter
        your password.  If you'd like
        <application>Evolution</application> to forget your password
        sooner, select
        <menuchoice><guimenu>Settings</guimenu><guimenuitem>Forget
        Passwords</guimenuitem></menuchoice>, and it will do so
        immediately.
      </para>
      <para>
    If you get an error message instead of mail, you probably
    need to change your network settings.  To learn how to
    do that, have a look at <xref
    linkend="config-prefs-mail-network">, or ask your system
    administrator.
      </para>
      
      <sect3 id="usage-mail-getnsend-get-news">
         <title>Using Evolution for News </title>
       <para>
         Newsgroups are so similar to email there's no reason not to
         read them side by side.  If you want to do that, add a news
         source to your configuration (see <xref
         linkend="config-prefs-network-news">). The news server will
         appear as a remote server, and will look exactly like an IMAP
         folder, except that you can't delete messages from it.  When
         you click <guibutton>Get Mail</guibutton>,
         <application>Evolution</application> will also check for news
         messages.  If you prefer to use a different program, there's
         always <application>Pan</application>.
       </para>
       </sect3>

      <sect3 id="usage-mail-getnsend-get-attach">
    <title>Attachments, HTML Mail, and Live Documents</title>
    <para>
      If someone sends you a file attached to an email (an
      "attachment"), <application>Evolution</application> will
      display the file at the bottom of the message to which it's
      attached.  Text, HTML, and most images will be displayed in
      the message itself.  For other files,
      <application>Evolution</application> will provide a link and
      icon at the end of the message.  Click on that, and
      <application>Evolution</application> will ask you where you
      want to put the file.  Once you've chosen a location and
      saved the file, you can open, move, copy, or execute it just
      like any other, using <application>Nautilus</application> or
      your favorite shell or file manager.
    </para>

    <para>
       <application>Evolution</application> can also display
       HTML-formatted mail, complete with graphics.  HTML
       formatting will display automatically, although you can
       turn it off if you prefer.
    </para>

      </sect3>
    </sect2>

    <sect2 id="usage-mail-getnsend-send">
      <title>Writing and Sending Mail</title>
      <para>
     You can start writing a new email message by selecting
     <menuchoice> <guimenu>File</guimenu>
     <guisubmenu>New</guisubmenu> <guimenuitem>
     Mail</guimenuitem></menuchoice>, or by pressing the
     <guibutton>Compose</guibutton> button in the Inbox toolbar.
     When you do so, the <interface>New Message</interface> window
     will open, as shown in <xref
     linkend="usage-mail-newmsg-fig">.
      </para>

<!--   ==============Figure=================================== -->
      <figure id="usage-mail-newmsg-fig">
    <title>New Message Window</title>
    <screenshot>
      <screeninfo>Evolution Main Window</screeninfo>
      <graphic fileref="fig/newmsg-pic" format="png" srccredit="Kevin Breit">
    </graphic>
    </screenshot>
      </figure>
<!-- ==============End of Figure=================================== -->

 <!-- Check the alignment of the following paragraph in the PS and
 HTML output: it's indented for no good reason -->
      <para>
     Enter an address in the <guilabel>To:</guilabel> field, a
     subject in the <guilabel>Subject:</guilabel> and a message in
     the big empty box at the bottom of the window, and press
     <guibutton>Send</guibutton>.  That's easy.  It may even be
     too easy, which is why I like to queue my messages up to be
     sent a few minutes later.
       </para>
      <sect3 id="usage-mail-getnsend-send-delay">
    <title>Saving Messages for Later</title>
    <para>
       Evolution will send mail immediately unless you tell it to
       do otherwise by selecting <menuchoice>
       <guimenu>File</guimenu> <guimenuitem>Send
       Later</guimenuitem></menuchoice>.  That will add messages
       to the <guilabel>Outbox</guilabel> queue.  Then, when you
       press <guibutton>Send</guibutton> in another message, or
       <guibutton>Get Mail</guibutton> in the main mail window,
       all your unsent messages will go out at once.  I like to
       use "Send Later" because it gives me a chance to change my
       mind about a message before it goes out.  That way, I don't
       send anything I'll regret the next day.
    </para>
    <para>
           You can also choose to save messages as drafts or as text
           files.  Choose
           <menuchoice>
             <guimenu>File</guimenu>
             <guimenuitem>Save</guimenuitem>
      </menuchoice>
          or <guimenuitem>Save As</guimenuitem> to save your message
          as a text file. If you prefer to keep your message in a
          folder (the <guilabel>Drafts</guilabel> folder would be the
          obvious place), you can select <menuchoice>
          <guimenu>File</guimenu> <guimenuitem>Save In
          Folder</guimenuitem> </menuchoice>.
        </para>
    <para>
       To learn more about how you can specify message queue and
       filter behavior, see <xref linkend="config-prefs-mail">.
    </para>
    
    <para>
      You can probably guess the purpose of the buttons labelled
      <guibutton>Cut</guibutton>, <guibutton>Copy</guibutton>,
      <guibutton>Paste</guibutton>, <guibutton>Undo</guibutton>
      and <guibutton>Redo</guibutton> , but there's a bit more to
      sending mail that's less obvious.  In the next few sections,
      you'll see how <application>Evolution</application> handles
      additional features, including large recipient lists,
      attachments, and forwarding.
        </para>
      </sect3>
      <sect3 id="usage-mail-getnsend-send-attach">
    <title>Attachments</title>
    <para>
        If you want to attach a file to your email message, you
        can drag it from your desktop into the message window, or
        click the button in the toolbar with a paper clip on it,
        labelled <guibutton>Attach</guibutton>.  If you click the
        <guibutton>Attach</guibutton> button,
        <application>Evolution</application> will open a file
        selection dialog box, to ask you which file you want to
        send.  Select the file and click <guilabel>OK</guilabel>.
        </para>
    <para>
            To see what files you've attached to the message you're
            composing, select <menuchoice> <guimenu>View</guimenu>
            <guimenuitem>Show Attachments</guimenuitem> </menuchoice>.
        </para>
    <para>
            When you send the message, a copy of the attached file
        will go with it.  Be aware that big attachments can take a
        long time to download.
          </para>
    </sect3>
        <sect3 id="usage-mail-getnsend-send-to">
    <title>Choosing Recipients</title>
    <para>
      If you have created address cards in the contact manager,
      you can also enter nicknames or other portions of address
      data, and <application>Evolution</application> will complete
      the address for you. <!-- (INSERT description of UI for this
      feature, once it is decided upon). --> If you enter a name
      or nickname that can go with more than one card, Evolution
      will open a dialog box to ask you which person you meant.
      <!-- (NOT YET) Also, <application>Evolution</application>
      will add a domain to any unqualified addresses.  By default,
      this is your domain, but you can choose which one mail
      preferences dialog. -->
        </para>
        <para>
          Alternately, you can click on the
          <guibutton>To:</guibutton>, <guibutton>Cc:</guibutton>, or
          <guibutton>Bcc:</guibutton> buttons to get a list of email
          addresses.  Click the check-boxes next to the addresses, then
          click <guibutton>OK</guibutton>, and the address will be
          added to the appropriate form field.
        </para>
    <para>
          For more information about using email together with the
      contact manager and the calendar, see <xref
      linkend="usage-contact-automate"> and <xref
      linkend="usage-calendar-apts">.
    </para>

    <sect4 id="usage-mail-getnsend-send-to-mult">
      <title>Multiple Recipients</title>
      <para>
        <application>Evolution</application>, like all email
        programs (at least, all the ones in current use)
        recognizes three types of addressee: primary recipients,
        secondary recipients, and hidden ("blind") recipients. The
        <guilabel>To:</guilabel> field is for the primary
        recipients of the message you are going to send.  
         </para>
         <para>
        The simplest way to direct a message is to put the email
            address or addresses in the <guilabel>To:</guilabel>
            field, to denote primary recipients.  However, it is
            considered bad form to have more than a few email
            addresses in this section.  If you are sending mail to
            more than one or two people, consider the
            <guilabel>Cc:</guilabel> field.
      </para>
      <para>
        Hearkening back to the dark ages when people used
        typewriters and there were no copy machines, "Cc" stands
        for "Carbon Copy."  Use it whenever you want to share a
        message you've written to someone else.
        <example id="ex-mail-cc">
          <title>Using the Cc: field</title>
          <para>
             When Susan sends an email to a client, she puts her
             co-worker, Tim, in the in the
             <guilabel>Cc:</guilabel> field, so that he know
             what's going on.  The client can see that Tim also
             received the message, and knows that he can talk to
             Tim about the message as well.
          </para>
        </example>
      </para>
      <para>
        If you have a large number of recipients, or if you want
        to send mail to several people without sharing the
        recipient list, you should use
        <guilabel>Bcc:</guilabel>. "Bcc" stands for "Blind Carbon
        Copy", and means that people you put in the
        <guilabel>Bcc:</guilabel> field get the message, but
        nobody else sees their email address.  They will still see
        the list of addresses from the <guilabel>To:</guilabel>
        and <guilabel>Cc:</guilabel> fields, though.

        <example id="ex-mail-bcc">
          <title>Using the Bcc: field</title>
          <para>
             Tim is sending an email announcement to all of his
             company's clients, some of whom are in competition
             with each other, and all of whom value their
             privacy. He needs to use the
             <guilabel>Bcc:</guilabel> field here.  If he puts
             every address from his address book's "Clients"
             category into the <guilabel>To:</guilabel> or
             <guilabel>Cc:</guilabel> fields, he'll make the
             company's <emphasis>entire</emphasis> client list
             public.  Don't assume it won't happen to you!
         </para>
        </example>
      </para>
    </sect4>
      </sect3>

   <sect3 id="usage-mail-getnsend-send-reply">
    <title>Replying to Messages</title>
    <para>
       In order to reply to a message, click on it once in the
       message list to select it.  Then press the
       <guibutton>Reply</guibutton> button.  A window like the
       <interface>New Message</interface> window will appear, but
       the subject will already be present&mdash; the same subject
       as the message to which you are replying, but with Re:
       before it, to mark it as a reply.  In addition, the full
       text of the previous message is inserted into the new
       message, either in italics (for HTML display) or with the
       &gt; character (in plain text mode) before each line.  This
       indicates quoting.  You can intersperse your message with
       the quoted material as shown in <xref
       linkend="usage-mail-getnsend-reply-fig">

<!-- note that this figure should have a reply mail ready to send,
with quoted materials and the relevant replies interspersed-->
 <!-- ==============Figure=================================== -->
       <figure id="usage-mail-getnsend-reply-fig">
     <title>Reply Message Window</title>
     <screenshot>
      <screeninfo>Evolution Main Window</screeninfo>
      <graphic fileref="fig/replymsg" format="png" srccredit="Aaron Weber">
    </graphic>
    </screenshot>
      </figure>
<!-- ==============End of Figure=================================== -->
    </para>

    <para>
      If a message has several recipients, as in the case of
      mailing lists or messages that have been carbon copied, you
      may wish to click <guibutton>Reply to All</guibutton>
      instead of <guibutton>Reply</guibutton>.  If there are large
      numbers of people in the <guilabel>Cc:</guilabel> or
      <guilabel>To:</guilabel> fields, this can save substantial
      amounts of time.  But be careful, and always make sure you
      know who is getting a message: it could be a mailing list
      with thousands of subscribers.
      <example>
        <title>Using the Reply to All feature</title>
        <para>
          Susan sends an email to a client, and sends copies to
          Tim and to an internal company mailing list of
          co-workers.  If Tim wants to make a comment to all of
          them, he uses <guibutton>Reply to All</guibutton>, but
          if he just wants to tell Susan that he agrees with her,
              he uses <guibutton>Reply</guibutton>.
        </para>
      </example>
    </para>
      </sect3>
      <sect3 id="usage-mail-getnsend-send-find">
        <title>Searching and Replacing with the Composer</title>
    <para>
           You're probably familiar with search and replace features,
           and if you come from a Linux or Unix background, you
           probably know what <guimenuitem>Find Regex</guimenuitem>
           does.  If you aren't among the lucky who already know,
           here's a quick rundown of an important section of the
           <guimenu>Edit</guimenu> menu.
        </para>
    <para>
           <variablelist>
        <varlistentry>
          <term><guimenuitem>Find</guimenuitem></term>
          <listitem><para> Enter a word or phrase, and
          <application>Evolution</application> will find it
              in your message.
          </para></listitem>
        </varlistentry>
        
        <varlistentry>
          <term><guimenuitem>Find Regex</guimenuitem></term>
          <listitem>
        <para>
                  Perform a search for a <glossterm
                  linkend="regular-expression">regular
                  expression</glossterm>, or "regex."
               </para>
             </listitem>
        </varlistentry>

        <varlistentry>
          <term><guimenuitem>Find Again</guimenuitem></term>
          <listitem><para>
                   Select this item to repeat the last search you performed.
              </para></listitem>
        </varlistentry>

        <varlistentry>
           <term><guimenuitem>Replace</guimenuitem></term>
           <listitem><para> 
                 Find a word or phrase, replace it with
             something else.  
               </para></listitem>
        </varlistentry>

      </variablelist>
        </para>  
    <para>
            For all of these items, you have two additional choices.
            First, you can choose whether to <guilabel>Search
            Backwards</guilabel>, which will perform the search
            starting wherever your cursor is, and moving back towards
            the beginning of the document (normally, it goes the other
            way).  Then, you can decide whether to have your search be
            <guilabel>Case Sensitive</guilabel>, meaning should it pay
            attention to the case of letters when locating a match.
        </para>
      </sect3>
      <sect3 id="usage-mail-getnsend-send-html">
    <title>Embellish your email with HTML</title>
    <para>
            You can't normally use text treatments or pictures in
            emails, which is why you've probably seen people use far
            too many exclamation points for emphasis or use
            <glossterm linkend="emoticon">emoticons</glossterm> to convey their feelings.
            However, most of the newer email programs can include and
            display images and text treatments as well as basic
            alignment and paragraph formatting.
        </para>
    <note>
      <title>HTML Mail is not a Default Setting</title>
      <para>
        Some people do not have HTML-capable mail clients, or
        prefer not to receive HTML-enhanced mail because it is
        slower to download and display.  <emphasis>Some</emphasis>
        people refer to HTML mail as "the root of all evil" and
        get very angry if you send them HTML mail, which is why
        <application>Evolution</application> sends plain text
        unless you explicitly ask for HTML.  To send HTML mail,
        you will need to select <menuchoice>
        <guimenu>Format</guimenu> <guimenuitem>
        HTML</guimenuitem></menuchoice>.  Alternately, you can set
        your default mail format preferences in the mail
        configuration dialog.  See <xref
        linkend="config-prefs-mail-other"> for more information.
          </para>
    </note>
    <para>
           HTML formatting tools are located just above the
       composition frame, and in the <guimenu>Insert</guimenu> and
       <guimenu>Format</guimenu> menus.  Your message text will
       appear formatted in the composer window, and the message
       will be sent as HTML.
      </para>
      <para>
            The icons in the toolbar are explained in tool-tips, which
            appear when you hold your mouse over the buttons.  The
            buttons fall into four categories:
            <variablelist>
             <varlistentry>
             <term>Headers and lists</term>
          <listitem>
        <para>
                  Choose <guilabel>Normal</guilabel> for a default
                  text style, or <guilabel>Header 1</guilabel> through
                  <guilabel>Header 6</guilabel> for varying sizes of
                  header from large (1) to tiny (6).  You can also
                  select <guilabel>pre</guilabel> for preformatted
                  text blocks, and three types of <guilabel>List
                  Item</guilabel>.
                </para>
          </listitem>
           </varlistentry>
           <varlistentry>
             <term>Text style</term>
          <listitem>
        <para>
                  Use these buttons to determine the way your letters
                  look.  If you have text selected, the style will
                  apply to the selected text.  If you do not have text
                  selected, the style will apply to whatever you type
                  next.  The buttons are:
                  <itemizedlist mark="none">      
          <listitem><para>Push <guibutton>B</guibutton> for bold text</para></listitem>   
                  <listitem><para>Push <guibutton>I</guibutton> for italics</para></listitem>
          <listitem><para>Push <guibutton>U</guibutton> to underline</para></listitem>
          <listitem><para>Push <guibutton>S</guibutton> for a strikethrough.</para></listitem>
                 </itemizedlist>
               </para>               
          </listitem>    
        </varlistentry>
        <varlistentry>
          <term>Alignment</term>
          <listitem>
        <para>
                   Located next to the text style buttons,
                   these three paragraph icons should be familiar to
                   users of most word processing software.  The
                   leftmost button will make your text left-justified,
                   the center button, centered, and the right hand
                   button, right-justified.
                </para>
          </listitem>
          </varlistentry>

        <varlistentry>
          <term>Indentation rules</term>
          <listitem>
        <para>
                  The button with the arrow pointing left will reduce
                  a paragraph's indentation, and the right arrow will
                  increase its indentation.
               </para>
        </listitem>
      </varlistentry>

        <varlistentry>
          <term>Color Selection</term>
          <listitem>
        <para>
                  At the far right is the color section tool.  You can
                  choose from several colors by clicking on the arrow,
                  or create your own custom color by clicking on the
                  color box itself.  If you have text selected, the
                  color will apply to the selected text.  If you do
                  not have text selected, the color will apply to
                  whatever you type next.
               </para>
        </listitem>
      </varlistentry>


      </variablelist>
        </para>
    <para>
           There are three tools that you can find only in the
           <guimenu>Insert</guimenu> menu.
           <variablelist>
             <varlistentry>
               <term><guimenuitem>Insert Link</guimenuitem>:</term>
           <listitem>
            <para>
                  Use this tool to put hyperlinks in your HTML
                  messages.  When you select it,
                  <application>Evolution</application> will prompt you
                  for the <guilabel>Text</guilabel> that will appear,
                  and the <guilabel>Link</guilabel>, where you should
                  enter the actual web address (URL).
              </para>
        </listitem>
          </varlistentry>
          <varlistentry>
            <term> <guimenuitem>Insert Image</guimenuitem>:</term>
        <listitem>
          <para>
               <guimenuitem>Insert Image</guimenuitem>: Select this item to
               embed an image into your email, as was done in the welcome
               message.  Images will appear at the location of the
               cursor.
              </para>
        </listitem>
           </varlistentry>
          <varlistentry>
             <term><guimenuitem>Insert Rule</guimenuitem>:</term>
             <listitem><para>
               This will insert a horizontal line, or rule, into your document.
               You'll be presented with a dialog box which gives you
               the choice of size, percentage of screen, shading, and
               alignment; if you leave everything at the default
               values you'll get a thin black rule all the way across
               the screen.</para></listitem>
    </varlistentry>

      </variablelist>
          </para>
      <note>
        <title>A Technical note on HTML Tags</title>
        <para>
          The composer is a WYSIWYG (What You See Is What You Get)
          editor for HTML. That means that if you enter HTML
          directly into the composer&mdash; say, <markup
          role="html">&lt;B&gt;Bold Text&lt;/B&gt</markup>, the
          the composer will assume you meant exactly that string
          of characters, and not "make this text bold," as an HTML
          composition tool or text editor would.
        </para>
    </note>
      </sect3>
   

<!-- Function not implemented, 
possibly never will be due to security evil. -->
<!--
    <sect3 id="usage-mail-getnsend-send-live">
      <title>Live Documents</title>
      <para>
        Later versions of <application>Evolution</application>
        will allow you to enliven your email with almost any
        sort of document, and even with entire
        applications. At this point, however, this feature has not 
        yet been implemented.
      </para>
    </sect3>
-->

      <sect3 id="usage-mail-getnsend-fwd">
    <title>Forwarding Mail</title>      
    <para>
      The post office forwards your mail for you when you change
      addresses, and you can forward mail when you get a letter by
      mistake.  The email <guilabel>Forward</guilabel> button
      works in much the same way.  It's particularly useful if you
      have received a message and you think someone else would
      like to see it.  You can forward a message as an attachment
      to a new message (this is the default) or
      you can send it <glossterm linkend="inline">inline</glossterm> as a quoted
      portion of the message you are sending.  Attachment
      forwarding is best if you want to send the full, unaltered
      message on to someone else.  Inline forwarding is best if
      you want to send portions of a message, or if you have a
      large number of comments on different sections of the
      message you are forwarding.  Remember to note from whom the
      message came, and where, if at all, you have removed or
      altered content.
    </para>
    <para>
      To forward a message you are reading, press
      <guibutton>Forward</guibutton> on the toolbar, or select
      <menuchoice> <guimenu>Message</guimenu>
      <guimenuitem>Forward</guimenuitem> </menuchoice>.  If you
      prefer to forward the message <glossterm linkend="inline">inline</glossterm>
      instead of attached, select <menuchoice>
      <guimenu>Message</guimenu> <guimenuitem>Forward
      Inline</guimenuitem> </menuchoice> from the menu.  Choose an
      addressee as you would when sending a new message; the
      subject will already be entered, but you can alter it.
      Enter your comments on the message in the
      <interface>composition frame</interface>, and press
      <guibutton>Send</guibutton>.
    </para>
      </sect3>
      <sect3 id="usage-mail-getnsend-ettiquette">
    <title>Seven Tips for Email Usage</title>
    <para>
      I started with ten, but four were "Don't send
      <glossterm linkend="spam">spam</glossterm>."
      <itemizedlist>

        <listitem>
          <para>
         Don't send spam or forward chain mail.  If you must,
         watch out for hoaxes and urban legends, and make sure
         the message doesn't have multiple layers of
         greater-than signs, (&gt;) indicating multiple layers
         of careless inline forwarding.
          </para>
        </listitem>

        <listitem>
          <para>
        Always begin and close with a salutation. Say
        "please" and "thank you", just like you do in real
        life. You can keep your pleasantries short, but be pleasant!
          </para>
        </listitem>

        <listitem>
          <para>
        ALL CAPS MEANS YOU'RE SHOUTING! Don't write a whole
        message in capital letters.  It hurts people's ears.
          </para>
        </listitem>

        <listitem>
          <para>
         Never write anything in email you wouldn't say in
         public.  Old messages have a nasty habit of
         resurfacing when you least expect.
          </para>
        </listitem>

        <listitem>
          <para>
           Check your spelling and use complete sentences.
          </para>
        </listitem>

        <listitem>
          <para>
        Don't send nasty emails (flames).  If you get one,
        don't write back.
          </para>
        </listitem>

        <listitem>
          <para>
         When you reply or forward, include just enough of
         the previous message to provide context: not too
         much, not too little.
           </para>
        </listitem>
      </itemizedlist>
    </para>
    <para> Happy mailing! </para>
      </sect3>
    </sect2>
  </sect1>

  <sect1 id="usage-mail-organize">
    <title>Organizing Your Mail</title>
    <para>
      Even if you only get a few email messages a day, you probably
      want to sort and organize them.  When you get a hundred a day
      and you want to refer to a message you received six weeks ago,
      you <emphasis>need</emphasis> to sort and organize them.
      Fortunately, <application>Evolution</application> has the tools
      to help you do it.
    </para>

    <sect2 id="usage-mail-organize-folders">
      <title>Getting Organized with Folders</title>
      <para>
    <application>Evolution</application> keeps mail, as well as
    address cards and calendars, in folders.  You start out with a
    few, like <guilabel>Inbox</guilabel>,
    <guilabel>Outbox</guilabel>, and <guilabel>Drafts</guilabel>,
    but you can create as many as you like.  Create new folders by
    selecting <guisubmenu>New</guisubmenu> and then
    <guimenuitem>Folder</guimenuitem> from the
    <guimenu>File</guimenu> menu.
    <application>Evolution</application> will as you for the name
    and the type of the folder, and will provide you with a folder
    tree so you can pick where it goes.
      </para>
      <para>
        When you click <guibutton>OK</guibutton>, your new folder will
    appear in the <interface>folder view</interface>.  You can
    then put messages in it by dragging and dropping them, or by
    using the <guibutton>Move</guibutton> button in the toolbar.
    If you create a filter with the <interface>filter
    assistant</interface>, you can have mail moved to your folder
    automatically.
      </para>
    </sect2>    

    <sect2 id="usage-mail-organize-search">
      <title>Searching for Messages</title>
      <para>
    Most mail clients can search through your messages for you,
    but <application>Evolution</application> does it faster.  You
    can search through just the message subjects, just the message
    body, or both body and subject.
      </para>
      <para>
    To start searching, enter a word or phrase in the text area
    right below the toolbar, and choose a search type:
    <variablelist>
      <varlistentry>
        <term><guilabel>Body or subject contains:</guilabel></term>
      <listitem>
          <para>
            This will search message subjects and the messages
            themselves for the word or phrase you've entered in
            the search field.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term> <guilabel>Body contains:</guilabel> </term>
        <listitem>
          <para>
            This will search only in message text, not the subject
            lines.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term><guilabel>Subject contains:</guilabel></term>
        <listitem>
          <para>
            This will show you messages where the search text is
            in the subject line.  It will not search in the
            message body.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term><guilabel>Body does not contain:</guilabel></term>
        <listitem>
          <para>
            This finds every email message that does not have the
            search text in the message body.  It will still show
            messages that have the search text in the subject
            line, if it is not also in the body.
          </para>
        </listitem>
      </varlistentry>
      <varlistentry>
        <term><guilabel>Subject does not contain:</guilabel></term>
        <listitem>
          <para>
            This finds every mail whose subject does not contain
            the search text.
          </para>
        </listitem>
      </varlistentry>
    </variablelist>

        Then, press <keycap>Enter</keycap>.
        <application>Evolution</application> will show your search
        results in the message list.

      </para>
    </sect2>

    <sect2 id="usage-mail-organize-filters">
      <title>Staying organized: Mail Filters in Evolution</title>
      <para>
        I once worked in the mail room of a large company, where my
        job was to bundle, sort, and distribute mail to the various
        mail boxes and desks throughout the building.  Filters do that
        same job with email, but they lose much less mail than I did.
        In addition, you can have multiple filters performing multiple
        actions that may effect the same message in several ways.  For
        example, your filters could put copies of one message into
        multiple folders, or keep a copy and send one to another
        person as well.  Which is to say, it's quite a bit more
        flexible than an actual person with a pile of envelopes.
      </para>
      <para>
        Most often, you'll want to have
        <application>Evolution</application> put mail into different
        folders, but you can have it do almost anything you like.
        People who subscribe to multiple mailing lists, or who often
        need to refer to messages they have sent, find filters
        especially helpful to separate personal from list-related
        mail, but they're good for anybody who gets more than a few
        messages a day.  To create a filter, open the
        <interface>filter assistant</interface> by selecting
    <menuchoice>
      <guimenu>Tools</guimenu> 
          <guimenuitem>Mail Filters</guimenuitem>
        </menuchoice>.
      </para>
            
       <figure id="usage-mail-filters-fig-assist">
     <title>The Filter Assistant</title>
     <screenshot>
      <screeninfo>The Filter Assistant</screeninfo>
      <graphic fileref="fig/filter-assist-fig" format="png" srccredit="Aaron Weber">
    </graphic>
    </screenshot>
      </figure>

      <para>
        The <interface>filter assistant</interface> window contains a
        list of your current filters, sorted by the order in which
        they will be performed.  From the drop-down box at the top of
        the window, choose whether to display all your filters, only
        those filters which are performed on incoming mail, or only
        filters for outgoing mail.
      </para>
      <para>
         The <interface>filter assistant</interface> also has a set of
         buttons:
        <itemizedlist>

           <listitem><para>
            <guibutton>Add</guibutton> &mdash; Create a new filter.
           </para></listitem>

           <listitem><para>
            <guibutton>Edit</guibutton> &mdash; Edit an existing filter.
           </para></listitem>

           <listitem><para>
            <guibutton>Delete</guibutton> &mdash; Delete the selected filter.
           </para></listitem>

           <listitem><para>
            <guibutton>Up</guibutton> &mdash; Move the selected filter up in the list, 
             so it will be performed sooner.
           </para></listitem>

           <listitem><para>
            <guibutton>Down</guibutton> &mdash;  Move the selected filter down 
             in the list, so it will be performed later.
           </para></listitem>
        </itemizedlist>

        If you don't have any filters set up, the only one you can
        click is <guibutton>Add</guibutton>.  When you do that, (or
        when you click <guibutton>Edit</guibutton> with a filter
        selected), the <interface>Add Rule</interface> window appears.
      </para>
      <para>
        That window, shown in <xref
        linkend="usage-mail-filters-fig-new">, is where you'll
        actually create your filtering rule.  

       <figure id="usage-mail-filters-fig-new">
     <title>Creating a new Filter</title>
     <screenshot>
      <screeninfo>Creating a new Filter</screeninfo>
      <graphic fileref="fig/filter-new-fig" format="png" srccredit="Aaron Weber">
    </graphic>
    </screenshot>
      </figure>
      </para>
      <para>
        Enter a name for your filter in the <guilabel>Name</guilabel>
        field, and then begin choosing criteria.  Choose how many
        criteria you'd like by pressing <guibutton>More</guibutton>
        and <guibutton>Fewer</guibutton>.  You can choose from five
        types of criteria, and you can have as many as you like; at
        least, I've never found a maximum.  If you have multiple
        criteria, you'll want to decide between <guilabel>Match all
        parts</guilabel>, which will make the filter affect only those
        messages which meet all the criteria you're about to describe,
        and <guilabel>Match any part</guilabel>, which will make the
        filter affect any message that meets even one of the criteria.
     </para>
     <para>
        For each of your filter criteria, you must first select what
        part of the message you want the filter to look at:
        <variablelist>
      <varlistentry>
        <term><guilabel>Sender</guilabel></term>
        <listitem><para>
                The author of the message.
            </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><guilabel>Recipients</guilabel></term>
        <listitem><para>
               The recipients of the message.
            </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><guilabel>Subject</guilabel></term>
        <listitem><para>
                The subject line of the message.
            </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><guilabel>Message Body</guilabel></term>
        <listitem><para>
                The message body.
            </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><guilabel>Expression</guilabel></term>
        <listitem><para>
               Enter a <glossterm linkend="regular-expression">regular expression</glossterm>, and
           <application>Evolution</application> will match it for
           you.
           </para></listitem>
      </varlistentry>
    </variablelist>
      </para>
      <para>
        Then choose a rule for matching:
        <variablelist>

      <varlistentry>
        <term><guilabel>Contains</guilabel></term>
        <listitem><para>
               If the part of the message examined contains the text you enter, 
               the filter will perform its selected action.
            </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><guilabel>Does not contain</guilabel></term>
        <listitem><para>
               If the part of the message examined does not contain
               the text you enter, 
               the filter will perform its selected action.
            </para></listitem>
      </varlistentry>
    </variablelist>

      </para>
      <para>
         Then, enter the text you want the filter to find, and you're
        done telling <application>Evolution</application> what sort of
        messages you want it to filter.
      </para>

      <para>
        Now, tell it what to do with those messages.  If you want multiple
        actions, click <guibutton>More</guibutton>; if you want fewer,
        click <guibutton>Fewer</guibutton>.  And choose again:
        <variablelist>
      <varlistentry>
        <term><guilabel>Move to Folder</guilabel></term>
        <listitem><para>
               If you select this item, <application>Evolution</application>
               will put the messages into a folder you specify.  Click the 
               <guibutton>&lt;click here to select a folder&gt;</guibutton> button
               to select a folder. 
            </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><guilabel>Forward to Address</guilabel></term>
        <listitem><para>
                Select this, enter an address, and the addressee will
                get a copy of the message.
            </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><guilabel>Delete</guilabel></term>
        <listitem><para>
                Marks the message for deletion.  You can still get the message
                back, at least until you <guimenuitem>Expunge</guimenuitem> your
                mail yourself.
            </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><guilabel>Stop Processing</guilabel></term>
        <listitem><para> Select this if you want to tell all other
        filters to ignore this message.  If multiple filters copy
        the message to a different folders, you'll have multiple
        copies of the message.  </para></listitem>
      </varlistentry>

      <varlistentry>
        <term><guilabel>Assign Color</guilabel></term>
        <listitem><para>
                Select this item, and <application>Evolution</application>
                will mark the message with whatever color you please.
            </para></listitem>
      </varlistentry>
    </variablelist>
      </para>
      <para>
        You're done.  Click <guibutton>OK</guibutton> to use this
        filter, or <guibutton>Cancel</guibutton> to close the window
        without saving any changes.
      </para>



   <!-- FIXME: This needs to be in there.  But the feature is temporarily
         disabled and I don't know how it will be reimplemented.

      <itemizedlist>
        <listitem>
           <para>
         <guilabel>When mail arrives:</guilabel> Select
         this option to have messages filtered as they
         arrive.
           </para>
         </listitem>
         <listitem>
           <para>
         <guilabel>When mail is sent:</guilabel> Select
         this option to filter your outgoing mail.  You
         can use this feature to keep your
         <interface>Outbox</interface> as organized as
         your <interface>Inbox</interface>.
         </para>
      </listitem>
    </itemizedlist>
      </para>

    -->

      <note>
    <title>Two Notable Filter Features</title>
    <para>
      <itemizedlist>
        <listitem><para>
              Incoming email that your filters don't move goes into the Inbox; 
              outgoing mail that they don't move ends up in the Sent folder.
             </para>
        </listitem>

        <listitem><para>If you move a folder, your filters
        will follow it.  </para></listitem>
      </itemizedlist>
    </para>
      </note>
    </sect2>



    <sect2 id="usage-mail-organize-vFolders">
      <title>Getting Really Organized with Virtual Folders</title>
      <para>
    If filters aren't flexible enough for you, or you find
    yourself performing the same search again and again, consider
    a virtual folder. Virtual folders, or vFolders, are an
    advanced way of viewing your email messages within
    <application>Evolution</application>.  If you get a lot of
    mail or often forget where you put messages, vFolders can help
    you stay on top of things.
      </para>
      <para>
    A vFolder is really a hybrid of all the other organizational
    tools: it looks like a folder, it acts like a search, and you
    set it up like a filter.  In other words, while a conventional
    folder actually contains messages, a vFolder is a view of
    messages that may be in several different folders.  The
    messages it contains are determined on the fly using a set of
    criteria you choose in advance.
      </para>

      <para>
    As messages that meet the vFolder criteria arrive or are
    deleted, <application>Evolution</application> will
    automatically place them in and and remove them from the
    vFolder contents list.  When you delete a message, it gets
    erased from the folder in which it actually exists, as well as
    any vFolders which display it.
      </para>

      <para>
    Imagine a business trying to keep track of mail from hundreds
    of vendors and clients, or a university with overlapping and
    changing groups of faculty, staff, administrators and
    students.  The more mail you need to organize, the less you
    can afford the sort of confusion that stems from an
    organizational system that's not flexible enough.  vFolders
    make for better organization because they can accept
    overlapping groups in a way that regular folders and filing
    systems can't.
      </para>

      <example id="usage-mail-organize-vFolders-ex">
    <title>Using Folders, Searches, and vFolders</title>
    <para>
       To organize my mail box, I set up a vFolder for emails from
       my friend and co-worker Anna.  I have another one for
       messages from anybody at work that have "Evolution" in the
       subject line, so I can keep a record of what people from
       work send me about <application>Evolution</application>.
       If Anna sends a message about a picnic on Saturday, it only
       shows up in the "Anna" folder. When Anna sends me mail
       about the user interface for
       <application>Evolution</application>, I can see that
       message both in the "Anna" vFolder and in the "Internal
       Evolution Discussion" vFolder.
    </para>
      </example>

    <!--  (INSERT SCREENSHOT HERE: vFolders in action) -->

      <para>
     To create a vFolder, select <guimenuitem>vFolder
     Editor</guimenuitem> from the <guimenu>Tools</guimenu>
     menu in the <interface>main window</interface>.  This
     will bring up a dialog box that looks suspiciously like
     the Filter Assistant (for more information on filters, see
     <xref linkend="usage-mail-organize-filters">), and which
     presents you with a list of vFolders you have previously
     created. If you have already created vFolders, you can
     click on them in the frame labelled <guilabel>Select Rule
     Type</guilabel>, and edit or remove them.  If you have
     not created any, there will be only one available option:
     click <guibutton>Add</guibutton> to add a new vFolder.
      </para>
      <para>
     You can enter a name for your vFolder in the
     <guilabel>Name</guilabel>.  Then, tell
     <application>Evolution</application> what messages to look
     for.  This process is exactly like filter creation: decide
     between <guilabel>Match all parts</guilabel> and
     <guilabel>Match any part</guilabel>, then choose what part of
     the message to look in, what sort of matching to perform, and
     specify exactly what text it is that you want to find.
       </para>
       <para>
         The second part, however, is slightly different.  In the
         section of the window labelled <guilabel>vFolder Sources
         </guilabel> is a list of folders in which
         <application>Evolution</application> will search for the
         contents of your vFolder.  Click <guibutton>Add</guibutton>
         to add a folder, or <guibutton>Remove</guibutton> to remove
         one.  That way, you can have your vFolder search in
         newsgroups, or just in one of your mailboxes, or just in a
         select few folders you've already screened with filters.
       </para>
       <para>
        The vFolder creation window is shown in <xref
    linkend="usage-mail-vfolder-fig-createrule">

       <figure id="usage-mail-vfolder-fig-createrule">
     <title>Selecting a vFolder Rule</title>
     <screenshot>
      <screeninfo>Creating a vFolder Rule</screeninfo>
      <graphic fileref="fig/vfolder-createrule-fig" format="png" srccredit="Aaron Weber">
    </graphic>
    </screenshot>
      </figure>
      </para>
    </sect2>
  </sect1>
</chapter>