2000-05-22 Jeffrey Stedfast <fejj@helixcode.com>
* camel-mime-filter-smtp.c: filter: Updated to check for
\r's.
* providers/smtp/camel-smtp-transport.c: smtp_data: Fixed the
filtered stream
2000-05-22 Jeffrey Stedfast <fejj@helixcode.com>
* camel-mime-filter-from.c: Undid previous changes
* camel-mime-filter-smtp.[c,h]: Fixed code to change \n into \r\n.
Should probably strip \r's or check for \r's before making changes
to the buffer.
* providers/smtp/camel-smtp-transport.c: Fixes for stream changes,
updated to use camel smtp mime filter.
* Makefile.am: Added camel-mime-filter-smtp.c
2000-05-22 Jeff Stedfast <fejj@helixcode.com>
* camel-mime-filter-from.c: formatting changes and changed
comparisons to be case-insensitive - no guarentee that "From "
tag will be in that case, it could be "fRoM " for all we know
since the RFC doesn't specify that it MUST be in that particular
case format.
* camel-mime-filter-smtp.[c,h]: added to tree but not makefiles.
Code needs to be tested.
2000-05-19 NotZed <NotZed@HelixCode.com>
* camel-simple-data-wrapper.c (construct_from_stream): If we
already have been constructed, unref our content.
(write_to_stream): Check we've been constructued, and change for
stream api changes.
* camel-mime-parser.c: Removed exception stuff.
* md5-utils.c (md5_get_digest_from_stream): repaired.
* camel-mime-message.c: Remove exception from write_to_stream, and
fix, and fix formatting.
* providers/sendmail/camel-sendmail-transport.c (_send_internal):
Fix for stream changes.
* providers/pop3/camel-pop3-store.c (camel_pop3_command): Fixes
for stream changes.
* providers/mbox/camel-mbox-folder.c, and elsewhere, fix all
stream api changes.
(mbox_append_message): Use stream_close() now its back.
(mbox_append_message): unref the from filter.
* camel-stream-mem.c: And here.
* camel-stream-fs.[ch]: Here too.
* camel-stream-filter.c: Likewise. This is getting tedious.
* camel-stream-buffer.c (stream_write): Fix a few little problems.
(stream_close): Reimplmeent.
(camel_stream_buffer_read_line): Slightly more efficient version,
that also only allocates the right amount of memory for strings.
* camel-seekable-substream.c: Likewise.
* camel-seekable-stream.[ch]: Remove exceptions, fix formatting,
changes for stream (re)fixes. set_bounds returns an error.
* camel-stream.[ch]: Remove exceptions. Make flush and reset return
an error code, repair all the screwed up formatting, and put back
close.
* camel-mime-part-utils.c
(camel_mime_part_construct_content_from_parser): And here.
* camel-mime-part.c (camel_mime_part_set_content): And this too.
(write_to_stream): Fixed for stream changes.
* camel.h: Fixed.
* providers/vee/camel-vee-folder.c (vee_search_by_expression):
Implement. Performs an intersection of the two searches.
(camel_vee_folder_finalise): Unref search folders.
(vee_append_message): Implement append.
2000-05-18 Dan Winship <danw@helixcode.com>
* camel-folder.c: remove message_number_capability and require uid
capatibility.
(camel_folder_list_subfolders, camel_folder_get_uid_list,
camel_folder_get_subfolder_info, camel_folder_get_message_info):
removed
(camel_folder_get_subfolder_names,
camel_folder_free_subfolder_names): new subfolder interfaces.
(camel_folder_get_uids, camel_folder_free_uids): new uid
interfaces
(camel_folder_get_summary, camel_folder_free_summary): new summary
interfaces
* providers/mbox/camel-mbox-folder.c,
* providers/nntp/camel-nntp-folder.c:
* providers/vee/camel-vee-folder.c: Update for changes
* providers/pop3/camel-pop3-folder.c: Implement get_uids, update
for other changes.
2000-05-18 NotZed <NotZed@HelixCode.com>
* providers/vee/camel-vee-folder.c: Guess!
* camel-folder-search.c (search_user_flag): Implement user_flag
search term.
* camel-folder-search.h: Added user_flag search capability
(user-flag "blah")
* providers/mbox/camel-mbox-folder.c (mbox_init): Set USER flag in
permanent flags for the folder.
2000-05-17 Dan Winship <danw@helixcode.com>
* camel-folder.c: Remove unused async open/close and
copy_message_to functions.
Rename functions without initial _. Fix glib preconditions and
gtk-doc comments.
2000-05-17 Dan Winship <danw@helixcode.com>
* camel-data-wrapper.c: remove get/set_output_stream operations.
They're redundant with write_to_stream, and CamelMimePart and
CamelMimeMessage only implement the latter, meaning that trying to
get_output_stream on a CamelMimeMessage that was built from pieces
rather than being parsed from a stream doesn't work. Anything that
uses get_output_stream can be rewritten to use write_to_stream, so
we'll standardize on that.
(camel_data_wrapper_new): remove this: CamelDataWrapper is
supposed to be an abstract class.
(write_to_stream): remove default implementation. (Moved to
CamelSimpleDataWrapper)
* camel-simple-data-wrapper.c: resurrect, although it's not really
the same thing it was before. A simple data wrapper, which is
backed by a CamelStream.
* camel-mime-part-utils.c
(simple_data_wrapper_construct_from_parser): Use
construct_from_stream rather than set_output_stream.
(camel_mime_part_construct_content_from_parser): Change
camel_data_wrapper_new to camel_simple_data_wrapper_new.
* camel-mime-part.c (camel_mime_part_set_content): Change
camel_data_wrapper_new to camel_simple_data_wrapper_new.
2000-05-17 Darin Adler <darin@eazel.com>
* camel-folder-summary.c: (message_info_load):
Quick fix to get it to compile. I hope I don't get into trouble.
2000-05-17 Dan Winship <danw@helixcode.com>
* camel.h: Don't include the no-longer-distributed
possibly-to-be-removed headers.
* providers/smtp/camel-smtp-transport.c
(smtp_get_email_addr_from_text): fix an off-by-one error in
address parsing
(smtp_data): use camel_data_wrapper_get_output_stream rather than
data_wrapper->output_stream
2000-05-17 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-folder.c (message_changed): Snoop
changes to user flags on the message into the summary as well.
* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_init):
Changed version init to include the parent class version info
(i.e. add it not overwrite it).
* camel-folder-summary.c (message_info_new): Initialise user_flags
to empty.
(message_info_load): And load user flags.
(message_info_save): And save user flags.
(message_info_free): And free them.
(CAMEL_FOLDER_SUMMARY_VERSION): Bumped file revision.
* camel-folder-summary.h: Added user-flags to summary.
* camel-mime-message.c (camel_mime_message_set_user_flag): Dont
use a hashtable for user flags.
(camel_mime_message_get_user_flag): And changed here too.
(camel_flag_get): New interface to get a flag from a flag
list. Flag lists are easier to work with than hash tables, and
save memory too.
(camel_flag_set): And set.
(camel_flag_list_free): And free.
(free_key_only): Discard.
(finalize): Remove the flag list.
2000-05-17 Jeffrey Stedfast <fejj@stampede.org>
* providers/smtp/camel-smtp-transport.c: (smtp_helo): Error
checking on gethostbyaddr() eliminating a possible segfault.
2000-05-16 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-folder.c (mbox_delete_message_by_uid):
Implement.
2000-05-12 NotZed <NotZed@HelixCode.com>
* camel-movemail.c (camel_movemail): Open the destination with
O_APPEND, so we dont blow away a partially transferred mbox.
(camel_movemail): Loop if we get errno=INTR, and not fail.
2000-05-11 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-summary.c (summary_rebuild): Update
the summarised file size, if everything went ok.
(camel_mbox_summary_expunge): Clear header flags after updating.
2000-05-16 Chris Toshok <toshok@helixcode.com>
* providers/nntp/camel-nntp-folder.c:
* providers/nntp/camel-nntp-folder.h:
* providers/nntp/camel-nntp-provider.c:
* providers/nntp/camel-nntp-store.c:
* providers/nntp/camel-nntp-utils.c:
* providers/nntp/camel-nntp-utils.h:
get things working with new camel summary stuff.
* providers/nntp/camel-nntp-summary.c:
* providers/nntp/camel-nntp-summary.h:
removed files since camel-folder-summary does all we need.
2000-05-15 Jeffrey Stedfast <fejj@stampede.org>
* providers/smtp/camel-smtp-transport.c: Added some preliminary
AUTH support.
2000-05-15 Dan Winship <danw@helixcode.com>
* camel-folder.h: Remove camel_folder_get_summary, which no longer
exists.
2000-05-11 Dan Winship <danw@helixcode.com>
* Makefile.am: remove some cruft that we're not currently using.
* camel-stream-mem.c (camel_stream_mem_new_with_buffer): Change
to match prototype (size_t vs unsigned int) so it works on 64-bit
machines. Noted by msw.
2000-05-11 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-folder.c (message_changed): Indicate
the summary changed also.
2000-05-11 Jeffrey Stedfast <fejj@stampede.org>
* providers/smtp/camel-smtp-transport.c: (smtp_helo):
Updated to more closely comply with RFC 821 standards
2000-05-11 NotZed <NotZed@HelixCode.com>
* camel-mime-part.c (write_to_stream): Unref the filter after
adding it to the filtering stream.
* providers/mbox/camel-mbox-summary.c
(camel_mbox_summary_finalise): Free the folder path.
(camel_mbox_summary_update): Also save summary when done.
(camel_mbox_summary_expunge): Unindex items when deleting them.
(camel_mbox_summary_expunge): Save the index as well as the
summary.
* camel-folder-summary.c (camel_folder_summary_finalise): Free the
summary path.
(camel_folder_summary_touch): New function, indicate the summary
info changed.
(camel_folder_summary_remove): Dirty here.
* camel-internet-address.c (internet_decode): Free multiple entry
addresses properly.
* camel-mime-utils.c (header_decode_mailbox): Plugged another
memleak, free text after converting it.
(header_decode_addrspec): More leaks plugged.
* camel-mime-message.c (finalize): Free message_uid.
(finalize): Free the recipients hashtable.
2000-05-11 <notzed@helixcode.com>
* camel-folder-summary.c (camel_folder_summary_finalise): Free
summary items and charset filters.
2000-05-10 <notzed@helixcode.com>
* camel-folder-summary.c (camel_folder_summary_finalise): Don't
free stuff in p, after we've free'd p.
* providers/mbox/camel-mbox-folder.c (mbox_append_message): Unref
the stream we created for appending.
2000-05-10 Jeffrey Stedfast <fejj@stampede.org>
* providers/smtp/camel-smtp-transport.c: (camel_smtp_transport_class_init):
Added initialization for service_class
2000-05-10 Dan Winship <danw@helixcode.com>
* camel-multipart.c (write_to_stream): fix a stupid typo. Thank
you, C.
* camel-mime-part.c (write_to_stream): don't ref the stream before
wrapper a filter around it, since nothing will ever unref it.
2000-05-10 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Added camel-types.h, camel-folder-pt-proxy.h, and
camel-thread-proxy.h.
2000-05-09 Dan Winship <danw@helixcode.com>
* providers/sendmail/camel-sendmail-transport.c (_send_internal):
Bleah. Can't fsync a pipe. As a quick kludge, just don't
stream_flush it. The right fix will require bringing back
stream_close though.
2000-05-09 Jeffrey Stedfast <fejj@stampede.org>
* camel-internet-address.[c,h]: Undid my changes (moved
struct _address back into came-internet-address.c)
* providers/smtp/camel-smtp-transport.c: (_send): changed
from using it's own address manipulation (using struct _address)
to using camel_internet_address_get(). Also some format changes
to keep consistant with the rest of Camel
2000-05-09 Jeffrey Stedfast <fejj@stampede.org>
* camel-internet-address.[c,h]: Moved struct _address from
camel-internet-address.c to camel-internet-address.h
(hopefully this doesn't break anything...)
* providers/smtp/camel-smtp-transport.c: (_send): now
populates the recipient list with To, Cc, and Bcc addresses.
Should now be able to use this module.
2000-05-09 Dan Winship <danw@helixcode.com>
* providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid):
one more refcounting fix I missed before.
2000-05-08 Jeffrey Stedfast <fejj@stampede.org>
* providers/smtp/camel-smtp-transport.c: no longer frees memory it
shouldn't, updated to reflect camel-stream changes involving
CamelException (perhaps it should use a different CamelException
variable than is passed to the camel smtp module?)
2000-05-08 Dan Winship <danw@helixcode.com>
* camel-stream.c (camel_stream_read, camel_stream_write,
camel_stream_flush, camel_stream_reset, camel_stream_printf,
camel_stream_write_to_stream): Use CamelException to signal
failure.
(camel_stream_write_strings): Remove. camel_stream_printf is more
useful in most of the places that used this.
(camel_stream_write_string): Change from macro to function to
prevent problems with double-evaluation.
* camel-seekable-stream.c (camel_seekable_stream_seek,
camel_seekable_stream_set_bounds): Use CamelException.
(reset): Update.
* camel-seekable-substream.c, camel-stream-buffer.c,
camel-stream-filter.c, camel-stream-fs.c, camel-stream-mem.c:
Update.
* camel-stream-fs.c: Remove the virtual init functions and move
the code into the creator functions. Add CamelExceptions to
creation functions that could fail.
* camel-data-wrapper.c (camel_data_wrapper_write_to_stream): Use
CamelException.
* camel-mime-message.c, camel-mime-part.c, camel-multipart.c
(write_to_stream): Update.
* camel-mime-parser.c: add an exception to the mime parser private
data and pass that to stream functions as needed.
* gmime-content-field.c, md5-utils.c: Update (badly) for stream
changes.
* camel-exception.h (camel_exception_is_set): convenience macro.
* providers/Makefile.am: disable SMTP for now
* providers/mbox/camel-mbox-folder.c (mbox_append_message): Pass
CamelException to the functions that now need it. Check the
exception after calling camel_stream_flush, and fail if it fails.
(mbox_get_message_by_uid): More updates.
* providers/pop/camel-pop3-folder.c,
providers/pop/camel-pop3-store.c,
providers/sendmail/camel-sendmail/transport.c: Update.
2000-05-08 NotZed <NotZed@HelixCode.com>
* camel-mime-message.c (process_header): Format From and Reply-To
to at least a decoded string. Should probably store them as an
camelinternetaddress.
* Merged NEW_SUMMARY branch back to trunk, and resolved conflicts.
* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_update):
Return status.
(camel_mbox_summary_expunge): Force an update of the summary
before we do anything.
(camel_mbox_summary_expunge): Build new xev line in xevnew, and
free that, and consify xev.
(camel_mbox_summary_load): If we are rebuilding from scratch, make
sure we clear the summary content.
* camel-stream-filter.c (do_close): We NEED a stream close.
2000-05-07 Dan Winship <danw@helixcode.com>
Make camel not leak like a sieve.
* camel-object.c: New subclass of GtkObject which is now the base
of the Camel object hierarchy. Currently the only difference
between CamelObject and GtkObject is that CamelObjects don't start
out floating.
* *.h: Move a bunch of typedefs to camel-types.h. Standardize on
using <camel/foo.h> in header files rather than <foo.h>, "foo.h",
or "camel/foo.h". Remove some unneeded includes.
* camel-address.c, camel-data-wrapper.c, camel-folder-search.c,
camel-folder-summary.c, camel-folder.c, camel-mime-filter.c,
camel-mime-parser.c, camel-service.c, camel-session.c,
camel-stream.c: These are now subclasses of CamelObject.
* camel-data-wrapper.c (set_output_stream):
* camel-medium.c (set_content_object):
* camel-seekable-substream.c
(init_with_seekable_stream_and_bounds):
* providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid):
remove gtk_object_sink calls.
* camel-stream-buffer.c (init_vbuf):
* camel-stream-filter.c (camel_stream_filter_new_with_stream):
ref the original stream.
* camel-folder-summary.c (camel_folder_summary_finalise): unref
the filters when finalizing.
* camel-mime-part-utils.c
(simple_data_wrapper_construct_from_parser,
camel_mime_part_construct_content_from_parser):
* camel-mime-part.c (camel_mime_part_set_content): Unref objects
that are created only to be handed off to other objects. If
they're going to be needed later, they will have been additionally
ref'ed by the object that needs them.
* providers/pop3/camel-pop3-folder.c (get_message_by_number):
unref the message stream after creating the data from it.
* camel-stream.c, camel-stream-buffer.c, camel-stream-filter.c,
camel-stream-fs.c, camel-stream-mem.c: Remove camel_stream_close,
since its semantics are dubious (what happens when you close a
stream other people still have references on?).
* providers/nntp/camel-nntp-store.c:
* providers/smtp/camel-smtp-transport.c:
* providers/pop3/camel-pop3-store.c:
replace camel_stream_close calls with gtk_object_unref.
* providers/mbox/camel-mbox-folder.c:
* providers/nntp/camel-nntp-folder.c:
* providers/sendmail/camel-sendmail-transport.c:
replace camel_stream_close with camel_stream_flush +
gtk_object_unref
2000-05-06 Dan Winship <danw@helixcode.com>
* providers/pop3/camel-pop3-store.c (query_auth_types): A machine
which serves neither POP nor KPOP is not a POP server.
* providers/smtp/camel-smtp-provider.c: Note in the description
that this provider is not yet tested.
2000-05-08 <notzed@helixcode.com>
* camel-mime-part.c (write_to_stream): Free the filter stream when
done.
* camel-mime-parser.c (folder_seek): Make sure we add the \n
terminal when we seek as well (frob!).
* camel-mime-utils.c (header_decode_addrspec): Plug minor memleak.
* camel-mime-part.c (finalize): Free header tables once finished.
* camel-folder-summary.c (camel_folder_summary_remove): Dont try
to access info after its free'd.
2000-05-07 NotZed <NotZed@HelixCode.com>
* camel-mime-part.c (write_to_stream): Apply encoding to content
part, when writing to a stream *sigh*.
* camel-stream-filter.c (do_write): implement write for the
filtering stream. Writes shouldn't be mixed with reads.
(do_flush): Implemented flush. Again write/flush shouldn't be
mixed with reads. Only flushes if the last op was write.
(do_close): Force flush on close.
* camel-mime-filter.c (filter_run): Oops, make sure we include the
backlen in the total length before passing onto the filter.
* camel-mime-filter-from.c: New filter, munges 'From ' lines into
'>From ', for mbox.
* camel-mime-parser.c (camel_mime_parser_header_remove): New
function to remove the parser's raw header, rather than
manipulating the header directly (wich doesn't work with
mempools).
* camel-mime-utils.c (header_address_list_clear): Fixed some
broken(tm) logic, which would leak entries on multivalued lists.
* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_load):
Use ibex_save() to save the ibex. Makes a big difference to
startup times for very large mailboxes.
(camel_mbox_summary_expunge): Dum de dum, reimplemented. Designed
to be much more robust, and to stop immediately if anything awry
happens.
(copy_block): Utility function to copy n bytes from one fd to
another.
(header_write): Utility function to write out raw headers to an
fd.
(camel_mbox_summary_update): Incremental summary updater.
* providers/mbox/camel-mbox-folder.c (mbox_get_message_by_uid):
Dont unref the stream, because of the broken(tm) ref model of gtk
widget that for some odd reason is being perpetuated in camel.
(mbox_expunge): Reenable expunge again.
(mbox_append_message): Removed the optimised mbox append. If its
an issue, it can go back later. Cleaned up a lot, checks error
returns, and automagically translates 'From ' into '>From' as
necessary.
2000-05-07 <notzed@helixcode.com>
* camel-mime-filter.c (filter_run): Oops, forgot to add the
backlen to the pre-buffer (*poof*).
2000-05-07 NotZed <NotZed@HelixCode.com>
* camel-mime-message.c (construct_from_parser): Allow
HSCAN_FROM_END to terminate the processing of a message.
* camel-folder-summary.c (perform_content_info_load): Ick, dont
try and append a node onto its own list.
(camel_folder_summary_clear): Actually clear the indexes after
we've removed the messages.
(camel_folder_summary_clear): Set dirty if it changes.
(camel_folder_summary_load): Clear dirty.
(camel_folder_summary_save): Only save if dirty.
* providers/mbox/camel-mbox-summary.c (summary_header_load): Oops,
remember to call that parent class first ...
(summary_header_save): Here too.
(camel_mbox_summary_load): Do more checking to verify the index
contents as well as teh summary contents, against the mbox
contents.
(camel_mbox_summary_load): Removed some fo that checking, it needs
more code to work reliably.
2000-05-07 <notzed@helixcode.com>
* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_load):
Set the size and mtime of the mbox we indexed once done.
* camel-folder-summary.c (camel_folder_summary_set_index): Dont
write the index if it changes - let the claler fix it (uh, kind of
impacts performance).
(camel_folder_summary_load): close in.
* camel-folder-summary.c (summary_format_string): Check header
exists before trying to strip its leading spaces.
2000-05-06 NotZed <NotZed@HelixCode.com>
* camel-folder.h: Removed summary info from here, and include
camel-folder-summary.h as well.
* camel-mime-parser.c (camel_mime_parser_step): Allow it to accept
a NULL databuffer.
* providers/mbox/camel-mbox-summary.c: Totally new file, now
subclasses camel-folder-summary.
* camel-folder-summary.c (message_info_load): Load the uid as a
string.
(message_info_save): And save too.
(camel_folder_summary_clear): New function, clears the contents of
the summary.
* providers/mbox/camel-mbox-folder.c: Fixes for summary changes.
(mbox_get_message_by_uid): Completely redone. Now cross-checks
the summary information to make sure we get a real message.
(mbox_append_message): Disabled the copy version of append for
now.
(mbox_expunge): Temporarily disabled the expunge function, until
it is put back in camel-mbox-summary.c
2000-05-05 NotZed <NotZed@HelixCode.com>
* camel-folder-summary.c: And same here ...
(camel_folder_summary_encode_fixed_int32): Ugh, fwrite doesn't
return -1 on error ..
(camel_folder_summary_decode_fixed_int32): Neither deos fread.
(camel_folder_summary_encode_token): Fix here too.
(summary_build_content_info): Use start-headers to get the pos of
the message, not parser_tell(), which might not be what we
expected because of parser_unstep().
(camel_folder_summary_encode_token): Use bserch() to tokenise the
values, rather than a linear search.
* camel-mime-utils.c: Defined out some memory profiling stuff I
left there by mistake.
(header_decode_mailbox): Dont try to append the word part of a
local address if we ran out of words.
* camel-mime-parser.c (folder_scan_content): Apply the fix from
the header scanner to here too.
(folder_scan_header): Only check for end of header if we have
space for it (didn't end the read with a newline)
(folder_scan_header): inptr is the only real thing we need
registerised for performance. Try to help the compiler be smart
about it ..
(folder_scan_header): Simplified the save header case a tad.
Commented out some memory profiling stuff.
2000-05-05 <notzed@helixcode.com>
* camel-mime-utils.c (header_decode_mailbox): Plug a memory leak.
(header_decode_text): Fixed memory leaks with g_string_append().
(header_encode_string): And here too, and a few other places. The
glib api is so awful ...
(header_content_type_decode): More memory leaks.
2000-05-05 <notzed@helixcode.com>
* camel-mime-parser.c (folder_scan_init_with_fd): Make sure we
init the end of buffer sentinal!
(folder_scan_init_with_stream): And here too ...
2000-05-04 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-folder.c (summary_get_message_info):
Maxcount is minimum of the max and the requested count, not the
maximum :)
* camel-mime-parser.c (folder_scan_content): Properly set midline,
so we dont falsely catch offset boundary markers (i.e. From inside
content).
(folder_read): Set a sentinal on the end of the read data (\n) so
we dont have to check the buffer boundary in the inner loop.
(mempool_*): New experimental memory management routines, speed
up simple structure parsing by about 25% ... not compiled in by
default. Something similar may be needed for camel-mime-utils to
address performance issues with g_malloc and friends.
* camel-mime-utils.c: Added a macro w(x) used to wrap all warnings
about mime/rfc violations, so they can be turned off.
* camel-folder-summary.c (summary_build_content_info): Step after
the end of a message ...
Turn into a stand-alone program for testing and profiling.
2000-05-04 Dan Winship <danw@helixcode.com>
* providers/pop3/camel-pop3-store.c (pop3_connect): Don't fall
back to plaintext passwords if APOP fails, since it should also
fail.
2000-05-04 Dan Winship <danw@helixcode.com>
* camel-session.c (camel_session_list_providers): New function to
replace camel_provider_scan. Returns a list of either (a) all
currently-loaded providers, or (b) all available providers.
* camel-url.[ch]: Add an "empty" flag to CamelURL (indicating that
it contains only a protocol).
* camel-service.c (camel_service_query_auth_types): Make this take
a CamelException (since it may have to try to connect to the
server, and it might not able to.)
* providers/pop3/camel-pop3-store.c: add KPOP (Kerberized POP)
support. This is mostly so I have two kinds of authmech to play
with instead of just one. (But it does actually work.)
* providers/smtp/camel-smtp-transport.c (query_auth_types): update
for prototype change, but disable the functionality, since it
doesn't really support any auth types yet.
(camel_smtp_transport_get_type): add an object init function to
set the service url_flags.
2000-05-04 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-summary.c: Yes, and anotherone.
* camel-mime-utils.c: And another one.
* camel-mime-part.c: And another one.
* camel-mime-part-utils.c: And another one.
* camel-folder-search.c: And another one.
* camel-mime-parser.c: Reverted a change wihtout a ChangeLog entry.
2000-05-04 NotZed <NotZed@HelixCode.com>
* camel-folder-summary.[hc]: Yes, CamelFolderSummary is back ...
... re-usable class to summarise and index any stream or message
and to manage/load/save the created summaries.
* camel-folder.c: Include string.h to kill a warning.
2000-05-03 Jason Leach <leach@wam.umd.edu>
* Makefile.am (INCLUDES): add $(UNICODE_CFLAGS) to the INCLUDES,
people who installed libunicde in non-standard include paths need
this.
2000-05-03 NotZed <NotZed@HelixCode.com>
* camel-folder.h: Added pos/bodypos/endpos to the basic message
content info object. Size to be removed? Moved the
messageconentinfo and messageinfo back to camel-folder-summary.h.
* camel-mime-filter-index.c (camel_mime_filter_index_set_ibex):
New function to (re)set the index to use on a filter.
* camel-mime-parser.c (camel_mime_parser_scan_from): Whole bunch
of inline docs.
(camel_mime_parser_drop_step): New function to drop a state from
the parser. Needs more testing.
* camel-mime-utils.c (rfc2047_decode_word): If the iconv handle is
-1, then dont try and convert (crashes unicode_iconv?).
(rfc2047_decode_word): Use alloca for variables instead of
g_malloc - by the rfc they should always be short.
(rfc2047_decode_word): If we can't do the charset conversion, undo
the quoted-printable/base64 at least? Should probably convert
unknown characters to the utf-8 unknown character.
2000-05-02 Larry Ewing <lewing@helixcode.com>
* camel-mime-utils.c (header_decode_date): fix typo when
dereferencing saveoffset.
2000-05-02 NotZed <NotZed@HelixCode.com>
* camel-folder-search.c: Added some header doco.
* camel.h: REmove gmime-utils.h from here.
* providers/mbox/camel-mbox-search.[ch]: Removed. Functionally
redundant.
* providers/mbox/camel-mbox-folder.c (mbox_search_by_expression):
Use the new CamelFolderSearch class to do the actual searching,
just setup the search here.
* camel-folder-search.[ch]: A helper class that providers may
subclass to provide their own search functionality, or they can
simply use as is, it supports body searches if an ibex is
supplied, and header searches if a summary is supplied.
2000-05-02 Matt Loper <matt@helixcode.com>
* Makefile.am: set G_LOG_DOMAIN.
* providers/MH/Makefile.am: same.
* providers/maildir/Makefile.am: same.
* providers/mbox/Makefile.am: same.
* providers/nntp/Makefile.am: same.
* providers/pop3/Makefile.am: same.
* providers/sendmail/Makefile.am: same.
* providers/smtp/Makefile.am: same.
2000-05-02 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-search.c
(camel_mbox_folder_search_by_expression): Dont store/remove
current search from the search list.
* providers/mbox/camel-mbox-folder.h: Removed searches list,
searches are all sync now.
* gmime-utils.[ch]: What the hell, remove it. This will break the
nntp provider. The mime parser can be used instead though.
Removed from all code including it (but none were using it).
* gmime-utils.c (_store_header_pair_from_string): Removed bizarre
string_dichotomy version of this. This code is somewhat redundant
now, and is headed for death anyway.
* gstring-util.c (g_string_dichotomy): Same with this one.
(g_string_clone): Removed a memory leak, g_string_new() allocates
its own memory.
(g_string_append_g_string): Allow to append an empty gstring onto
another gstring, dont abort()!
* string-utils.c (string_dichotomy): Removed this incredibly weird
function.
* camel-folder.c (_create): Replaced the rather obtuse use of
"string_dichotomy" function with a simple strrchr(). Still not
sure it'll work.
* camel-folder-summary.c: cvs removed a long-removed file.
* camel-mime-parser.c (folder_scan_header): Fix the previous
overflow problem properly (can happen in 2 places).
(header_append): A new macro to include the code changed above, so
it only appears in one place.
(folder_scan_step): Change the content type to text/plain if the
multipart is broken. Doesn't actually change the header though.
(header_append): Also move the header-start tracking stuff here.
Could be a static function to save code.
2000-05-02 <notzed@helixcode.com>
* camel-mime-part-utils.c
(simple_data_wrapper_construct_from_parser): Dont use autofill on
these fucking long function anmes!!!!!!
2000-05-02 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-summary.c
(camel_mbox_summary_expunge): Fix the offset for the summary when
an item is expunged to take account of the From line.
2000-05-01 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-folder.h (CamelMboxFolder): Removed
search_id.
* providers/mbox/camel-mbox-search.c
(camel_mbox_folder_search_cancel): Remove.d
(camel_mbox_folder_search_complete): Removed.
(camel_mbox_folder_search_by_expression): Changed back to sync
api.
(struct _searchcontext): Removed cancelled flag.
(find_context): Removed.
(func_header_contains): Debug out some search stuff.
* providers/mbox/camel-mbox-search.h
(camel_mbox_folder_search_by_expression): Moved back to sync api.
* providers/mbox/camel-mbox-summary.c
(camel_mbox_summary_set_flags_by_uid): New function to update the
flags in the summary.
(camel_mbox_summary_expunge): Expunge messages from a folder.
(offset_content): Re-align offsets of summary when messages
added/removed to an existing summary.
(camel_mbox_summary_remove_uid): Remove a message summary entry by
uid.
(index_folder): Restore flags from X-Evolution header, if they are set.
(index_folder): Make sure we index using a decimal uid, since
thats what everything else indexes off (oops).
Upped SUMMARY_VERSION as a result.
(camel_mbox_summary_expunge): Oops, my wrong, use the string uid
to unindex on.
* providers/mbox/camel-mbox-folder.c (_get_message_by_uid):
Connect to the message_changed signal.
(_init): Set permanent flags to something reasonable. No user
flags yet ...
(message_changed): If the flags of the message change, update the
flags in the summary.
(mbox_expunge): Implement the expunge.
(camel_mbox_folder_class_init): Renamed all leading _'s to mbox_'s
(mbox_expunge): Emit a folder_changed signal on expunge (uh, even
if it didn't ...)
* camel-folder.c (_finalize): Uh, dont free permanent_flags
anymore (this wouldn't failed anyway, it was a GList !!!)
(camel_folder_search_complete): Removed.
(camel_folder_search_cancel): Removed.
(camel_folder_expunge): Changed to only allow expunge on an open
folder. It doesn't make sense for mbox, otherwise (?)
(camel_folder_class_init): Added a folder_changed signal.
* camel-folder.h (struct _CamelFolder): Change permanent_flags to
a bitfield.
(list_permanent_flags): Renamed to get_permanent_flags, and
returns a bitfield.
(camel_folder_expunge): Changed expunge to a void type. The
messages would no longer be useful after they have been removed
...
(CamelFolderClass): New function summary_get_by_uid() to get a single
summary.
(*search*): Moved back to synchronous search api ... *sigh*
* camel-folder.h: Removed CamelSearchFunc.
* camel-mime-message.c (set_flag): Removed.
(camel_mime_message_set_flag): Removed.
(get_flag): Removed.
(camel_mime_message_get_flag): Removed.
(add_flag_to_list): Removed.
(get_flag_list): Removed.
(camel_mime_message_get_flag_list): Removed.
(camel_mime_message_get_flags): New interface to get system flags.
(camel_mime_message_set_flags): " to set ".
(camel_mime_message_get_user_flag): To get a user flag.
(camel_mime_message_set_user_flag): To set a user flag.
(finalize): Hmm, the old one free'd the key and data, not good
when the data is a boolean ...
2000-04-30 Dan Winship <danw@helixcode.com>
* camel-provider.h: Tweak the definition of CamelProvider. Among
other things, a provider may now be both a store and a transport.
* camel-provider.c: Remove a lot of code we had no intention of
using. This now only contains two functions: camel_provider_init
to read the installed .urls files, and camel_provider_load to
load and register a new provider.
* camel-session.c: Remove more unused code and simplify some of
the remaining code. The list of available provider modules is now
stored in the session, and it handles calling camel_provider_load
to load them as needed. Provider registration is now done by
calling back from the module init routine, which allows a single
module to register providers for multiple URL types.
* providers/*: Update provider structures and init routines for
the new stuff. Add a .urls file to each provider specifying what
urls it handles, and install that with the library.
* providers/nntp/camel-nntp-provider.c: Add hints towards
supporting both news: and nntp: URLs, and using nntp as both a
store and a transport.
2000-04-29 Dan Winship <danw@helixcode.com>
* camel-internet-address.c (camel_internet_address_get): const
poison
* camel-mime-part-utils.c
(simple_data_wrapper_construct_from_parser):
camel_mime_parser_tell() returns an offset from where it started
parsing, not necessarily from the start of data. Since we're
parsing a bounded seekable_stream, we need to add the stream's
starting bound to camel_mime_parser_tell's return value to
create the substream in the right place.
* camel-seekable-substream.c
(camel_seekable_substream_new_with_seekable_stream_and_bounds):
say CAMEL_STREAM_UNBOUND rather than -1 in doc.
* camel-seekable-stream.c (camel_seekable_stream_seek): Add more
info to docs.
2000-04-28 Dan Winship <danw@helixcode.com>
* camel-mime-parser.c (folder_scan_header): fix a bug that would
cause corruption with very long headers.
2000-04-27 Ettore Perazzoli <ettore@helixcode.com>
* providers/pop3/Makefile.am (INCLUDES): Add `-I$(srcdir)/../../..'
to pick the Camel includes.
* providers/sendmail/Makefile.am (INCLUDES): Likewise.
* camel.h: Don't #include <camel/data-wrapper-repository.h> anymore.
2000-04-27 NotZed <NotZed@HelixCode.com>
* camel-mime-utils.c (check_header): Dont try and check a NULL
header.
* camel-recipient.[ch]: Dead. Its not pining.
* camel-mime-message.h: Dont include recipients.h anymore.
* camel-mime-message.c (camel_mime_message_add_recipient): Accept
name/address separately, and store in an CamelInternetAddress.
(add_recipient): Removed.
(remove_recipient): Removed.
(remove_recipient_address): Renamed from remove_receipient, works
via address.
(camel_mime_message_remove_recipient_name): New function to remove
by name.
(get_recipients): Removed.
(camel_mime_message_get_recipients): Return a camel-internet-address.
(write_to_stream): No longer write receipients directly.
(write_recipients_to_stream): Removed.
(write_one_recipient_to_stream): Removed.
(camel_mime_message_init): Setup recipients hashtable, rather than
usign the recipients stuff.
(set_recipient_list_from_string): Killed, a violent and lengthy
death.
(process_header): Simplified recipient handling code a lot.
(received_date_str, sent_date_str, reply_to_str, subject_str,
from_str): Removed some oddly-defined global statics.
(camel_mime_message_class_init): Dont initialise above variables
anymore.
(init_header_name_table): Removed, use a table to init this, and
do it in class init (2 lines of code ...).
* camel-news-address.c: Class to represent news addresses -
currently empty, and not built.
* camel-internet-address.h: Class to represent internet (email)
addresses.
* camel-address.h: Abstract class to represent (lists of)
addresses.
2000-04-27 Dan Winship <danw@helixcode.com>
* camel-mime-part.c (write_to_stream): Revert previous change. I
was confused.
* camel-url.[ch] (camel_url_encode, camel_url_decode): expose
these routines.
2000-04-26 Dan Winship <danw@helixcode.com>
* camel-mime-part.c (write_to_stream): Only write a newline
between the headers and the content object if the content object
is not a CamelMedium. (If the content is a medium, it may have its
own headers, which then need to go before the blank line.)
* camel-mime-body-part.[ch]: Remove. We weren't using the fields
that made this different from camel-mime-part, so it basically
just forced us to do lots of gratuitous typecasting.
* camel-multipart.[ch]: Use CamelMimePart. Remove the multipart
parent stuff, since we weren't using that either.
* etc: update for CamelMimeBodyPart -> CamelMimePart
2000-04-26 Dan Winship <danw@helixcode.com>
* camel-medium.c (set_content_object): sink the content object
after referencing it.
* camel-mime-part.c: fix various little things in the handling
of CamelMedium methods. Change camel_mime_part_set_text to the
more generic camel_mime_part_set_content.
* camel.h: sync to current reality
* camel-folder-utils.[ch]: removed
* camel-mime-utils.c (header_format_date): fix format specifier
for time zone. Fix typo in month names array.
2000-04-26 NotZed <NotZed@HelixCode.com>
* camel-seekable-substream.c (stream_seek): Changed to have
absolute seek semantics, not relative to the bounds.
* camel-seekable-stream.c (reset): When we reset, seek to the
start of the bound, if there is one.
(stream_tell): Make tell virtual.
* camel-stream-filter.c (do_available): Removed.
* camel-stream-buffer.c: Remove leading _'s from static functions.
(stream_read): Renamed from read(). Fancy that conflicting! (my
boo!) Others too.
* providers/pop3/camel-pop3-folder.c (get_message_by_number):
Changed to stream_mem interface.
* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Fixed
for streamfs interface changes, and implement a failure case.
(_append_message): Changed for fs stream interface change.
* camel-multipart.c (print_part): Iterate rahter than callback. I
hate glists's interface (hence, move this to write_to_stream).
(write_to_stream): Return an error (yuck, this is a royal PITA to
do with the stream write interface).
* camel-mime-message.c: Removed leading _ from static names.
* camel-mime-part.h: construct_from_parser() now returns an error
code.
* camel-mime-part-utils.c
(camel_mime_part_construct_content_from_parser): Changed to use a
camel-data-wrapper instead of a camel-simple-data-wrapper (no
change needed elsewhere?).
(simple_data_wrapper_construct_from_parser): Fixes for stream-mem
interface changes.
* camel-simple-data-wrapper.[ch],
camel-simple-data-wrapper-stream.[ch],
camel-stream-data-wrapper.[ch], removed. Fixed including of these
files.
* camel-mime-part.c (camel_mime_part_set_text): Remove the use of
the camel-simple-data-wrapper-stream, just use a mem stream.
(write_to_stream): Renamed from my_*
(construct_from_stream): Return an error on error.
* camel-stream-mem.c (camel_stream_mem_new*): Remove mode
parameter.
* camel-stream-mem.h (enum CamelStreamMemMode): Removed. It
wasn't used at all.
* camel-data-wrapper.h: Add camel_data_wrapper_new() to create
these.
(write_to_stream, construct_from_stream): Return an error
indicator for success. Fixed all methods to match (ICK).
* Makefile.am (libcamel_la_SOURCES): Remove
camel-simple-data-wrapper.c, camel-simple-data-wrapper-stream.c,
camel-stream-data-wrapper.c. Obsoleted by code re-use!
* camel-data-wrapper.c (construct_from_stream): Change the default
implementation to just set the output stream == construction
stream. Well, this lets me get rid of both simple-data-wrapper
and stream-data-wrapper (unused anyway), and
simple-data-wrapper-stream in one hit. CamelDataWrapper is now
also a concrete class.
(write_to_stream): Use camel_stream_write_to_stream() to
calculate/return values (and save code).
Include <errno.h> for obvious reasons.
* camel-stream.c (eos): Provide a default implementation of .eos().
(camel_stream_write_to_stream): Make it return an error code on
error.
(camel_stream_printf): Changed to return the number of bytes
written/error.
(camel_stream_available): Removed.
* camel-stream-fs.h (enum CamelStreamFsMode): Removed. Changed to
use unix modes and so forth (wasn't used for anything but new file
creation and didn't work well either).
* camel-stream-fs.c: Removed leading _'s for names. And removed
some virtual method 'documentation'.
(destroy): Dont try and close a closed/error fd. Only report
error if close returns -1. Moved all the code to finalise(), and
killed this function.
(init_with_fd): Properly setup the seek offset, if it is a
valid and seekable file descriptor.
(init_with_fd_and_bounds): Use off_t for bounds, set bounds on the
seekable stream.
(init_with_name): Return error codes.
(init_with_name_and_bounds): Ditto.
(camel_stream_fs_new_with_name): REturn NULL object if it failed.
(camel_stream_fs_new_with_name_and_bounds): Return NULL object on
failure. Changed with_name* api's to take unix open style args
and flags.
(read): The bounded stream bounds checking seemed off, simplified
code a bit.
(write): Implement bounds checking for writing, the comment was
wrong, it could make sense to bound writing. Cleaned up a little.
(available): Gone.
(eos): Removed. Use CamelStream's implementation now.
(close): Reset the fd to -1, provide a warning for bad usage.
(seek): Cleaned up. Changed the behaviour a little, the returned
offset is the absolute position in the file, even in bounded
streams.
(seek): Seek from end mirrors lseek() behaviour (reverse seeking).
2000-04-25 NotZed <NotZed@HelixCode.com>
* camel-stream-fs.h (struct _CamelStreamFs): Moved bounds and eof
indicator to other parent classes.
* camel-stream.c (camel_stream_printf): New utility
function. Obvious use.
* camel-stream-mem.c: Removed leading _'s from static func's.
(camel_stream_mem_new_with_byte_array): Fixed for api changes, set
the owner for the byte array to us.
: Removed A bunch of gtk doc stuff for static (implementation) functions.
(available): Removed.
(write): Fixed the write implementation so that seek() works on a
seekable memory stream, as expected. Seeking past the end of the
buffer has unix semantics (filling with 0).
(available): Removed.
(write): Implement seekable stream bounded stream.
(read): Implement seekable stream bounded stream.
(close): Dont free the stream_mem if we're not the owner.
(seek): Allow to seek beyond the end of memory area,
implement bounds checking.
(seek): Set errno on bad policy.
* camel-stream-mem.h (struct _CamelStreamMem): Changed position to off_t.
(new_with_buffer): Changed len to be a size_t.
(set_buffer, set_byte_array): New interface functions.
(struct _CamelStreamMem): Removed position, it is stored in the
superclass.
* camel-stream.h: Removed some of the seemingly random
whitespace. Removed the available method (its not
impelemented/useful enough).
* camel-seekable-substream.c
(init_with_seekable_stream_and_bounds): Remove the data_available
stuff, it hasn't been properly implemented/finished, and may never
work (unfortunately *sigh).
(reemit_parent_signal): Removed part of the above change.
(set_bounds): Removed (moved to seekable-stream).
: Fixed up some of the generally unreadable indenting (sorry,
wrapping at 80 characters with
camels_really_long_function_names()
just_doesnt_work_very_well_does_it().
(available): Removed.
(stream_seek): Fixup for object changes. Make sure we return -1
if the parent stream can't seek.
* camel-seekable-stream.c (ccamel_seekable_stream_set_bounds): New
function to bound any seekable stream.
: Removed _'s.
(camel_seekable_stream_class_init): Implement an init function, to
setup the stream bounds to unbound.
* camel-seekable-stream.h (CamelSeekableStreamClass): New virtual
method set_bounds for seekable streams.
(CAMEL_STREAM_UNBOUND): New define for no bound.
* camel-seekable-substream.h (struct _CamelSeekableSubstream):
Removed sup_bound and inf_bound, moved to CamelSeekableStream (and
renamed, and changed to off_t's).
(new_with_seekable_stream_and_bounds): Use off_t as the bounds.
(CamelSeekableSubstreamClass): Uh, why was the intialiser virtual?
Removed.
* camel-seekable-stream.[ch] (CamelSeekableStreamClass): Changed seek
to accept an off_t as the offset.
(struct _CamelSeekableStream): Renamed cur_pos to position and
changed it to an off_t type.
(enum CamelStreamSeekPolicy): Set to match the SEEK_* constants
from lseek().
(get_current_position): Renamed to tell().
* camel-stream-buffer.h: Commented out set_vbuf - never implemented.
2000-04-25 Dan Winship <danw@helixcode.com>
* camel-stream-buffer.c (_eos): only return TRUE if the parent is
at eos AND the buffer has been exhausted
* camel-mime-message.c: fix some incorrect macro usage that
resulted in bogus casts
2000-04-24 Dan Winship <danw@helixcode.com>
* camel-mime-part-utils.c
(simple_data_wrapper_construct_from_parser): fix a cut-and-pasto.
* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): ref
(and sink) the message stream if we're going to unref it later.
Otherwise it could get destroyed while there are still substreams
attached to it. This needs a cleaner solution.
* camel.h: remove data-wrapper-repository.h include(s)
2000-04-24 NotZed <NotZed@HelixCode.com>
* camel-mime-message.c (construct_from_parser): Allow MESSAGE_END
_or_ EOF as valid termination conditions.
* providers/mbox/camel-mbox-summary.c (message_struct_new): Decode
and then re-encode the addresses, so they are consistently
formatted.
* camel-mime-utils.c (header_decode_mailbox): Store the address in
a _header_address. And try to get a comment-stored name if there
is one.
(header_decode_address): Actually return an address.
(header_to_decode): Renamed to header_address_decode()
(header_mailbox_decode): New function to get a single mailbox.
(header_mime_decode): Return the major/minor value, as
appropriate.
(header_address_new, and friends): Whole bunch of utility
functions for working with the address thingies.
(header_decode_domain): Free the string header, and dont expand
'.' into ' . '.
* camel.c (camel_init): No longer call
data_wrapper_repository_init.
* camel-medium.c (write_to_stream): Moved (back) to
camel-mime-part.
(add_header):
(set_header):
(remove_header):
(get_header): Make all these abstract, and spit warnings if
called. I guess it could manage the list, but well, it doesn't.
* camel-medium.h (struct _CamelMedium): Dont store headers here,
the implementor is the only one who knows their format.
(CamelMediumClass): Changed header values to be void *'s. They
need not be strings?
* camel-simple-data-wrapper.c (construct_from_stream): And we're
back. Set the output stream.
(construct_from_parser): Moved to camel-mime-part-utils.
* camel-mime-part-utils.c
(camel_mime_part_construct_content_from_parser): Create the
contents of multipart and simple messages.
(camel_mime_part_construct_content_from_parser): Oops, this was
totally screwed up, try creating the right cotnent on the right
object.
* camel-multipart.c (construct_from_parser): Moved to
camel-mime-part-utils.
(separate_part): Removed.
* camel-mime-part.c (construct_from_stream): Back again! This now
switches over to using a mime parser for any mime parts, only.
(my_write_to_stream): Write our headers and so forth here.
(add_header): Add header directly, parent class is abstract.
(remove_header): Ditto.
(set_header): Ditto.
* camel-data-wrapper.c (camel_data_wrapper_construct_from_stream):
Remade abstract.
(camel_data_wrapper_construct_from_parser): Moved to
camel_mime_part.
* camel-data-wrapper.h: Put back construct_from_stream.
* camel-mime-part.h: Put construct_from_parser in here, the
data-wrapper shouldn't know about mime. Ok, so now to undo half
of the last hours changes ... duh.
2000-04-23 Dan Winship <danw@helixcode.com>
* camel-mime-utils.c (header_to_decode, header_mime_decode): fix
some obvious minor bugs noted by -Wall.
2000-04-23 NotZed <NotZed@HelixCode.com>
* providers/pop3/camel-pop3-folder.c (get_message_by_number): Use
construct_from_stream instead of set_input_stream().
* camel-simple-data-wrapper-stream.c
(camel_simple_data_wrapper_stream_construct): REmoved the destroy
callback code.
(wrapper_destroy_cb): Removed.
* camel-simple-data-wrapper.h: Add prototype for _construct()
method.
* camel.c: Include unicode.h to kill a warning.
* camel-data-wrapper.h (CameldataWrapperClass): Removed
construct_from_stream virtual method.
Removed get/set input stream.
* data-wrapper-repository.[ch]: Removed&from build. Obsoleted?
The justification as is follows: It is mixing storage
protocol/format with message architecture. It really just doesn't
serve any purpose, as each medium implementor will have to have its
own type->handler mapping, and the only current implementor,
mimepart has a very simple structure and no need for this.
* camel-medium.c (write_to_stream): Moved here from most of the
stuff in camel-mime-part. Well, the MEDIUM is the one that knows
what the headers are, and the content is, let it write it out.
* camel-mime-part-utils.c (camel_mime_part_construct_content):
Copied from camel-mime-part.c, removed handling of message
followon state (moved to camel-mime-message).
(camel_mime_part_construct_content_from_parser): Renamed from
construct_content.
(camel_mime_part_construct_headers_from_stream):
(camel_mime_part_construct_content_from_stream):
(camel_mime_part_store_stream_in_buffer): Removed. Replaced by
the new construct from parser stuff.
* camel-mime-message.c (construct_from_parser): Do
construct_from_parser for mime-message.
(_write_to_stream): Set the mime-version header for medium to
write out, rather than writing it out ourselves.
* camel-data-wrapper.c (set_mime_type_field): Ref the
content_field when we get it?
(construct_from_stream): Removed.
(camel_data_wrapper_construct_from_stream): Changed to a helper
function, creates a mime_parser, and constructs from that.
(set_input_stream): Removed.
(camel_data_wrapper_set_input_stream): Removed.
(get_input_stream): Removed.
(camel_data_wrapper_get_input_stream): Removed.
* camel-mime-parser.c (camel_mime_parser_unstep): New function.
Cause a subsequent call to mime_parser_step() to return the same
state over again.
* providers/mbox/camel-mbox-folder.c (_get_message_by_uid):
Initial test code using the mime parser to construct the message.
(_get_message_by_uid): Use construct_from_stream() instead of
creating our own parser.
* camel-mime-part.c (construct_from_parser): part constructor.
(camel_mime_part_construct_content): Basically a simpler
replacement for the datawrapper repository.
(camel_mime_part_init): Set the default type to text/plain.
(camel_mime_part_construct_content): Removed to
camel-mime-part-utils.c
(my_get_output_stream): Removed. The streeam is in the
data-wrapper.
(my_get_content_object): Removed. The content object is stored in
the medium. If none is there, the object wasn't created properly.
(my_write_content_to_stream): Removed. The content object is the
one that knows how to write itself out!!!!!!!!
(my_write_to_stream): Remove the base header writing stuff - has
been moved to camel-medium, where it belongs. This can just be
used to check for mandatory headers.
(my_construct_from_stream): Removed.
(my_set_input_stream): What the hell, i'll remove this too.
Nobody seems to understand how it differs from create from stream,
and they both seem to serve the same purpose ...
* camel-simple-data-wrapper.c (construct_from_parser): Initial
implementation of a content constructor.
(construct_from_stream): Removed! Job taken over by
construct_from_parser.
* camel-multipart.c (construct_from_parser): Multipart
construction routine.
(camel_multipart_init): Set the default multipart type to
multipart/mixed. Duh, no subtype is not allowed anyway.
(set_input_stream): REmoved. Replaced by construct_from_parser.
2000-04-22 Dan Winship <danw@helixcode.com>
* camel-multipart.[ch]: clean, document, etc.
(camel_multipart_init): pick a prettier default boundary. Still
need to deal with the larger problem
2000-04-22 NotZed <NotZed@HelixCode.com>
* camel-mime-message.h (struct _CamelMimeMessage): Removed
send_date, and received_date, and replaced it with a time_t
'date' (this is what the header is called), and date_offset to
store the GMT offset of the date.
* camel-mime-message.c (camel_mime_message_set_from): Update raw
header as we go.
(_set_from): Removed.
(_get_from): Removed.
(camel_mime_message_get_from): Moved implementation here.
(camel_mime_message_get_subject): Move implementation here.
(_get_subject): Nuked.
(camel_mime_message_set_subject): Handle utf-8 input, and also
update raw header when changed.
(_set_subject): Removed.
(_set_received_date): Removed.
(camel_mime_message_set_received_date): Removed.
(_get_received_date): Removed.
(camel_mime_message_get_received_date): Removed.
(_get_sent_date): Removed.
(camel_mime_message_get_sent_date): Removed.
(camel_mime_message_get_date): New function to get the date as a
time_t/offset.
(camel_mime_message_set_date): Set the date as a time_t/offset.
(camel_mime_message_get_date_string): Get the date as a string.
(camel_mime_message_init): Initialise the current date as
'CMAEL_MESSAGE_DATE_CURRENT'.
(_set_reply_to): Removed.
(camel_mime_message_set_reply_to): Moved implementation here.
This is still broken, reply-to can have multiple addresses.
(_get_reply_to): Removed.
(_set_field): Removed, no longer used anywhere.
(_get_field): Also removed.
(_init_header_name_table): Add the Date header.
(process_header): Also handle snooping of Date header here.
* camel-stream-filter.c (finalise): Unref the source stream on
finalise, and also call the parent class (oops).
* camel-mime-parser.c (camel_mime_parser_state): New function to
get the current parser state.
(camel_mime_parser_stream): Allow you to get the stream back from
the mime_parser.
(camel_mime_parser_fd): Alternative to allow you to get the fd
back from the mime_parser.
(folder_scan_init_with_stream): Properly ref/unref the stream.
(folder_scan_close): Properly unref the stream/close the fd on
exit.
(folder_scan_init_with_fd): Close the old fd if there is one.
* camel-data-wrapper.c (camel_data_wrapper_construct_from_parser):
New method, construct a data wrapper from an initialised parser.
(construct_from_parser): Empty implementation.
* providers/mbox/camel-mbox-summary.c (message_struct_new):
Convert subject line to unicode, before storing in the summary.
(strdup_trim): Removed, no longer needed.
* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): Ref
the folder after setting it in the new message.
* camel-mime-part.c (my_set_content_object): Have the headers
follow the content-type change here too.
(my_write_to_stream): Dont write content-type here, automatically
stored in the headers ...
(my_write_to_stream): Use header_disposition_format() to format
the content-disposition header.
(my_write_to_stream): Removed old code, all headers are now stored
in the camel-medium level, always. Need to do the same with
camel-mime-message i suppose ...
(my_write_to_stream): Write the content using the parent class,
not some weird function.
(camel_mime_part_class_init): Dont override get_output_stream.
(camel_mime_part_encoding_from_string): Bleh, make it
case-insensitive.
* camel-mime-utils.c (header_content_type_is): Handle empty types.
(header_encode_string): Start of an implementation of the rfc2047
encoder. It does iso-8859-1, and us-ascii, and utf-8 (others get
tricky *sigh*)
(rfc2047_encode_word): Convert a single word/string into rfc2047
encoding.
(quoted_encode): Different quoted-printable encoding for rfc2047
encoding of headers.
* gmime-content-field.c (gmime_content_field_write_to_stream): Use
header_content_type_format() to format it.
2000-04-21 NotZed <NotZed@HelixCode.com>
* camel-mime-utils.h: Add prototype for header_param_list_free.
* camel-recipient.c: New function to remove all the types of a
recipient list. I think this whole object needs a major review.
* camel-mime-message.c (camel_mime_message_class_init): Removed
parse_header_pair override, override add_header instead.
(_parse_header_pair): Renamed to add_header.
(remove_header): Add this method, to make sure we keep upto date
with removed headers too.
(_set_field): If given a NULL value, clear it out.
(_set_recipient_list_from_string): Constify.
(set_header): Override set_header from camel_medium.
(process_header): Local function to handle set/add/remove of each
header we know about.
* camel-mime-part.c (camel_mime_part_class_init): Removed
parse_header_pair setup.
(my_parse_header_pair): Moved into add_header(), removed.
(my_set_disposition): Allow a NULL disposition to clear it.
(my_set_content_id): Allow NULL content id to clear it.
(remove_header): Track removed headers.
(my_set_description): Allow NULL description to clear it.
(my_set_content_MD5): Make sure we copy the md5 value, and allow a
NULL value to reset it.
(my_set_filename): Copy the filename.
(my_set_header_lines): Removed. Nothing uses it, it doesn't
actually serve any purpose.
(camel_mime_part_set_header_lines): Ditto.
(my_get_header_lines): Ditto.
(camel_mime_part_get_header_lines): Ditto.
(camel_mime_part_class_init): Remove *_header_lines setup.
(camel_mime_part_init): Remove header_lines init.
(my_finalize): Remove header_lines finalise.
(my_write_to_stream): Write the headers here. This is just WRONG,
camel_medium should be doing this.
(my_get_output_stream): Kill a warning.
(camel_mime_part_encoding_to_string): Ditto.
(camel_mime_part_set_description): Unvirtualiase, use add_header()
to do the processing.
(my_set_description): Removed.
(set_disposition): Renamed from my_set_disposition.
(camel_mime_part_get_description): Get the descriptionf rom the
get_header method.
(my_get_description): Removed.
(my_set_filename): Removed.
(camel_mime_part_get_filename): Get the parameter from the
disposition.
(camel_mime_part_encoding_from_string): Handle NULL string.
(camel_mime_part_init): Remove reference to filename.
(my_finalize): Dont free filename.
* camel-mime-part.h (CamelMimePartClass): Removed
parse_header_pair() method, it doesn't add anything that
add_header() can't be used for.
(CamelMimePartClass): Remove *_header_lines methods.
(struct _CamelMimePart): Remove header_lines list.
(struct _CamelMimePart): Removed filename attribute.
* camel-medium.c (camel_medium_init): Init headers to null, not a
hashtable.
(add_header): Append the headers as a list.
(remove_header): Remove headers as a list.
(get_header): Likewise for lookup.
(free_header): Removed, no longer needed.
(finalize): Free headers using header_raw_clear().
(camel_medium_set_header): New function, to reset and override all
values of a header with a new value.
* camel-medium.h (struct _CamelMedium): Changed to use a
header_raw struct rather than a hash table, to store headers
(many headers can occur multiple times).
* camel-mime-utils.c (header_raw_find_next): New function, allows
you to find multi-valued header fields.
(header_disposition_format): New function to format/create
content-disposition header string.
(header_param_list_format_append): Function to format parameter
lists into a GString.
(header_content_type_format): Function to format content-type into
a usable format.
(header_set_param): allow NULL value to remove the parameter.
(decode_token): Renamed from header_decode_token.
(header_decode_token): New interface for external use.
(quoted_decode): Made static to kill annoying warnings.
(g_strdup_len): Killed, replaced with calls to g_strndup().
(rfc2047_decode_word): Made static to kill warnings.
(decode_coded_string): Terminated.
(g_string_append_len): Made static to kill warnings.
(header_decode_text): Made static to kill warnings.
(header_decode_text): Constify.
(rfc2047_decode_word): Constify.
(header_param): Constify.
(header_content_type_new): Copy the type/subtype strings.
(header_param_list_decode): Made static.
(header_param_list_format_append): Made static.
(quoted_decode): Constify.
(g_string_append_len): Constify.
(header_token_decode): New function to decode a single token.
* providers/mbox/camel-mbox-summary.c (header_write): Append a
trailing \n when writing headers.
(strdup_trim): Killed a warning.
(camel_mbox_summary_set_uid): Make sure the next uid is at least 1
higher than any existing one.
(header_evolution_decode): Use header_token_decode to get the
token.
* camel-mime-parser.c (folder_scan_header): Strip the trailing \n
of the end of all header lines.
2000-04-20 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-utils.[ch]: Removed.
* providers/mbox/camel-mbox-parser.[ch]: Removed. Removed
references to it.
2000-04-20 Dan Winship <danw@helixcode.com>
* camel-mime-utils.c (rfc2047_decode_word): use libunicode iconv
functions rather than libc ones (since libc might not have them).
(header_decode_date): add autoconfiscation on timezone code
* camel.c (camel_init): call unicode_init ()
2000-04-20 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-summary.c (message_struct_new): Trim
leading/trailing spaces off the raw headers.
* MERGE NEW_PARSER branch into HEAD, fixed conflicts.
* gmime-content-field.c (_print_parameter): Duh, removed again
(@@#$@ cvs merge).
* camel-mime-utils.c (header_content_type_is): Constify.
(header_content_type_unref): Killed a couple warnings.
* camel-folder.c (_init): Removed more log crap.
* providers/Makefile.am (SUBDIRS): Removed nntp, pending fixes for
summary changes.
* providers/mbox/camel-mbox-folder.c (_get_message_by_number):
Fixed for new summary interface. Added a warning for using this
broken api.
(_get_message_by_uid): Fixed for message new with session
vanishing.
2000-04-19 Dan Winship <danw@helixcode.com>
* camel-simple-data-wrapper-stream.c
(camel_simple_data_wrapper_stream_get_type): This is a subtype of
CamelSeekableStream, not CamelStream.
* camel-seekable-substream.c: clean up a lot.
(eos): When testing for end-of-stream, reset the parent position
before testing if it is at end-of-stream, since either (a) it may
have been seek'ed to eos by someone else, or (b) we may have been
seek'ed away from eos and it hasn't been synced yet.
* camel-medium.[ch] (camel_medium_add_header): const poison.
(Belatedly goes with my change of 2000-02-23.)
(camel_medium_init): Use g_strcase_{hash,equal} on the header
array.
2000-04-18 Dan Winship <danw@helixcode.com>
* camel-mime-part.c (my_set_input_stream):
* camel-data-wrapper.c (set_input_stream, set_output_stream): do
better reference counting of streams so they actually go away
when they should.
* camel-log.[ch], *: Nuke camel log stuff. Replace calls to
CAMEL_LOG_WARNING with calls to g_warning.
* camel-data-wrapper.[ch]:
* camel-simple-data-wrapper.[ch]:
* camel-medium.[ch]: Clean, polish, document. Most of the gtk-doc
comments added to camel-data-wrapper.c note serious problems that
need to be fixed.
2000-04-17 Dan Winship <danw@helixcode.com>
* camel-mime-message.[ch]: Remove the "session" field from
CamelMimeMessage. Nothing uses it, about half of the existing
calls to camel_mime_message_new_with_session pass NULL, and
there's no obvious reason for it to be there.
* providers/MH/camel-mh-folder.c:
* providers/maildir/camel-maildir-folder.c:
* providers/mbox/camel-mbox-folder.c:
* providers/mbox/camel-mbox-utils.c:
* providers/nntp/camel-nntp-folder.c:
* providers/pop3/camel-pop3-folder.c: Use camel_mime_message_new
instead of camel_mime_message_new_with_session.
* camel-session.c (get_store_for_protocol_with_url): Set the
exception if no provider is found.
* camel-url.c: Add code to encode and decode %-escapes in URLs,
and do some additional correctness-checking on URL syntax. From
Tiago Antào with modifications by me.
2000-04-14 Chris Toshok <toshok@helixcode.com>
* providers/Makefile.am (SUBDIRS): add nntp
2000-04-14 Christopher James Lahey <clahey@helixcode.com>
* providers/mbox/camel-mbox-folder.c: Fix switch statement.
2000-04-14 Chris Toshok <toshok@helixcode.com>
* providers/nntp/camel-nntp-folder.c (_exists): always return TRUE
for now. we need to check the server response to make sure the
group exists.
(_get_message_by_uid): make sure to account for the \n we add to
the string after every line.
* providers/nntp/camel-nntp-utils.c (get_XOVER_headers): function
to get the headers using the XOVER command.
(get_HEAD_headers): function to get the headers using the HEAD
command on each message. slooooooow.
(camel_nntp_get_headers): make this function use either XOVER or HEAD
versions depending on whether or not the server extension is present.
2000-04-14 Dan Winship <danw@helixcode.com>
* camel-formatter.[ch]: This didn't belong in Camel. Move to mail/
* Makefile.am, camel-types.h: remove references to
camel-formatter.
2000-04-12 Matt Loper <matt@helixcode.com>
* camel-folder-pt-proxy.c (_folder_open_cb): Print warning message
for broken function.
(_folder_close_cb): Same.
2000-04-12 Miguel de Icaza <miguel@gnu.org>
* Makefile.am (pthread_SRC): Use correct names for the pthread
source variables.
2000-04-10 Dan Winship <danw@helixcode.com>
* providers/pop3/camel-pop3-store.c (pop3_connect): fix various
bugs in APOP code (still untested) and some of the error cases.
* camel-provider.h: Clarify what provider.protocol, provider.name,
and provider.description should be.
* providers/mbox/camel-mbox-provider.c:
* providers/pop3/camel-pop3-provider.c:
* providers/sendmail/camel-sendmail-provider.c:
* providers/smtp/camel-smtp-provider.c: update protocols, names,
and descriptions
* providers/mbox/camel-mbox-folder.c (_get_message_by_number):
implement get_message_by_number for the mail fetch code.
2000-04-09 Jeffrey Stedfast <fejj@stampede.org>
* providers/smtp/camel-smtp-transport.c: reformatted to fit
the standard indent format used by helix code
2000-04-09 Dan Winship <danw@helixcode.com>
* camel-movemail.c: New file with new function to dot-lock an mbox
file and copy it to a safe private directory.
2000-04-08 Christopher James Lahey <clahey@helixcode.com>
* providers/smtp/.cvsignore: Added a .cvsignore file.
2000-04-08 Dan Winship <danw@helixcode.com>
* providers/sendmail/camel-sendmail-transport.c (_send_internal):
actually record the pid returned by fork(). Noticed by clahey.
* providers/smtp/camel-smtp-transport.c: #include <sys/param.h>
for MAXHOSTNAMELEN. (This is a stopgap: some of the uses of
MAXHOSTNAMELEN are wrong anyway...)
2000-04-07 Jeffrey Stedfast <fejj@stampede.org>
* providers/smtp/camel-smtp-transport.c: fixes to numerous bugs;
should now build fine.
* providers/Makefile.am: Readded smtp now that smtp builds without
error.
2000-04-20 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-summary.c
(camel_mbox_summary_next_uid): Public function to get the next
uid, makes sure its saved to disk too.
* camel-mime-part.c (my_finalize): Fix disposition crap with a
real disposition.
(my_set_disposition): Likewise.
(my_get_disposition): And here.
(my_write_to_stream): And here, needs more cleanup.
* providers/mbox/camel-mbox-folder.c (_append_message): Assign a
new uid at this point.
* gmime-content-field.c (gmime_content_field_write_to_stream):
Make something up if we have an invalid/missing content type
(i.e. text/plain).
2000-04-19 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-folder.c (_delete): Fixed completely
broken switch() syntax, only compiled because errno is a macro on
some systems.
(_list_subfolders): Likewise.
2000-04-18 NotZed <NotZed@HelixCode.com>
* camel-mime-parser.c (folder_scan_init): init stream to null.
* providers/mbox/camel-mbox-summary.c
(CAMEL_MBOX_SUMMARY_VERSION): Moved to .c file, incremented.
(index_folder): Changed to have index passed via the summary.
(decode_string): Do a sanity check on the string size, so we dont
visit g_malloc()'s friendly abort().
* camel-folder-pt-proxy.c (camel_folder_pt_proxy_class_init):
Removed reference to set_name.
(_set_name): Removed.
* providers/mbox/camel-mbox-utils.c
(parsed_information_to_mbox_summary): Removed. Most of this file
is about to be binned.
* providers/mbox/camel-mbox-search.c (func_header_contains): Fixes
for changes to summary interface.
(struct _searchcontext): Remove pointer to message info, get it
straight from the mboxsummary.
(camel_mbox_folder_search_by_expression): New summary interface.
(camel_mbox_folder_search_by_expression): Uh, the summary is not
an object anymore (well not yet).
* providers/mbox/camel-mbox-folder.c
(camel_mbox_folder_class_init): Removed set_name init.
(_set_name): Removed.
(_open): Call new summary interface.
(_close): Use new summary interface.
(_create): Removed a summary object leak.
(_get_message_count): New summary interface.
(_get_uid_list): Use new summary interface. FIXME: this is leaky.
(_get_message_by_uid): Use the new summary interface, some
cleanup.
(_append_message): Totally changed, basically just appends the
message directly, ignores the summary (for now), the summary will
fix itself up if it needs to.
(_check_get_or_maybe_generate_summary_file): Bye bye old code.
(summary_get_message_info): Implement get_message_info again, for
folder.
* camel-folder.c (camel_folder_class_init): Removed set_name
setup.
(_set_name): Moved contents into _init.
(_init): Perform the old functions of set_name here.
* camel-folder.h: Removed the set_name internal interface.
2000-04-14 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-summary.[ch]: Completely replaced with
new code.
* Makefile.am (libcamel_la_SOURCES): Removed
camel-folder-summary.[ch].
* camel-folder.h (struct _CamelFolder): Removed summary.
(struct _CamelFolder): Changed flags to be 1 bit bitfields.
* camel-folder-summary.[ch]: Class removed entirely.
* camel-folder.c (camel_folder_get_summary): Removed.
(camel_folder_summary_get_message_info): Moved from
camel-folder-summary.c
(camel_folder_summary_get_subfolder_info): Moved from
camel-folder-summary.c
* camel-mime-parser.c (folder_scan_step): Store the start of
headers and start of from in the scan state.
(camel_mime_parser_tell_start_headers): Query the start of the
headers.
(camel_mime_parser_tell_start_from): Query the cached start of
from marker.
2000-04-13 NotZed <NotZed@HelixCode.com>
* gmime-content-field.c (gmime_content_field_free): Removed this
function. If its too dangerous to use, it shouldn't be here.
(gmime_content_field_ref): Also ref the embedded content-type.
(gmime_content_field_unref): Ditto to unref it.
* camel-mime-utils.h: Add a refcount for content-type header.
* camel-mime-utils.c (header_content_type_unref): Implement unref
for content-type.
(header_content_type_ref): Implement ref for header content type.
2000-04-12 NotZed <NotZed@HelixCode.com>
* gmime-content-field.h: Changed to use a _header_content_type.
Added type/subtype back for compatability with clients.
* gmime-content-field.c: Basically a total rewrite, and now just a
thin wrapper ontop of header_content_type.
(_free_parameter): Got rid of it.
(gmime_content_field_new): Use header_content_type_* functions.
(gmime_content_field_set_parameter): Likewise.
(_print_parameter): Blow away.
(gmime_content_field_write_to_stream): Get details from the
content_type field. Should check if it needs to escape chars in
the paramter value.
(gmime_content_field_get_mime_type): Likewise.
(___debug_print_parameter): Get rid of this rather annoyingly
named function.
(gmime_content_field_get_parameter): Simplified function.
(gmime_content_field_construct_from_string): Fixed this to use a
real parser.
(gmime_content_field_is_type): New function to test if a type matches.
(gmime_content_field_construct_from_string): Track type/subtype
from subordinate content_type header struct.
* gmime-rfc2047.[ch]: Removed. Unused.
* camel-stream-b64.[ch]: Blown away more duplicated code.
* Makefile.am: Removed camel-stream-b64.[ch], and
gmime-base64.[ch].
* camel-mime-part.c (my_get_content_object): Replaced
camel-stream-b64 with camel-stream-filter/camel-mime-filter-basic.
(my_write_content_to_stream): Replaced camel-stream-b64 with the
camel-stream-filter with an encoder.
(my_get_content_object): Also implement quoted-printable decoding.
(my_write_content_to_stream): Also implement quoted-printable
encoding.
(my_get_output_stream): Took out stream-b64 code (nothing's being
executed yet anyway).
* gmime-base64.[ch]: Blown away. Not used, dont need it.
* camel-mime-utils.h: Added offset for this header. Records where
it is in the source.
* camel-mime-utils.c (header_raw_append_parse): Add offset
parameter, to store where the header is stored in the stream.
(header_raw_append): Added offset param.
(header_raw_find): Return offset, if a pointer supplied for it.
(header_raw_replace): Add offset param.
(header_content_type_new): New function, to create an empty
content type.
(header_content_type_set_param): Set a parameter in the
content-type.
(header_set_param): Generic header parameter setting function.
(header_decode_string): Handle NULL input.
* camel-mime-parser.c (camel_mime_parser_headers_raw): New
function to get access to all the raw headers.
(folder_scan_header): Keep track of the header start position, and
store it when saving the header.
2000-04-11 NotZed <NotZed@HelixCode.com>
* camel-mime-utils.c: Moved a bunch of printf's to debug.
* camel-mime-parser.c: Moved a bunch of printf's to debug.
(folder_scan_header): Detect end of each header line using the
last scanned char, and not the last scanned position.
* camel-mime-filter-index.[ch]: Indexing filter. Indexes unicode
sequences into ibex files.
2000-04-09 NotZed <NotZed@HelixCode.com>
* camel-mime-part.c: Dont include gmime-base64.h
* camel-mime-filter-charset.c (complete): Implement the completion
function.
* camel-mime-parser.c (folder_scan_step): If we get to the end of
the body data, check any filters for outstanding completion data.
(camel_mime_parser_scan_from): Set whether we scan for "From "
headers or not.
* camel-stream-filter.c (do_read): If we get to end of stream on
the source, then call the filtering completion function to see if
we have any more data to return.
* camel-mime-filter-basic.c (filter): Implement quoted printable
encoding and decoding filters.
(complete): And the complete function as well.
* camel-mime-utils.c (base64_encode_close): Also take an input
buffer, allow closing of filters.
(quoted_encode_step): First cut, simple quoted-printable encoder.
Doesn't handle trailing spaces/tabs on end of line properly yet.
(quoted_encode_close): Complete a quoted-encoding.
(is_qpsafe): New type check, for quoted-printable safe characters
(that do not need encoding). Thats all bits used in the type
table! Rebuilt the types table.
(header_content_type_is): Checks a content type against at
type/subtype match.
(header_content_type_param): Handle NULL content type pointer.
2000-04-08 NotZed <NotZed@HelixCode.com>
* camel-mime-filter-basic.c (filter): Implement the base64
encoder. Problem is, there is no way to know when to close it.
Close/Reset will have to provide the same args as filter, so it can
flush remaining data *sigh*
* camel-mime-utils.c (base64_encode_step): A rather complex base64
encoder, fast?
(base64_step_close): Companion function to finish off the base64
sequence.
* camel-mime-part.c (my_write_content_to_stream): Changed to use
camel_stream_write_to_stream().
* camel-stream.[ch] (camel_stream_write_to_stream): From
camel_stream_b64_write_to_stream(). Fixed some infinite loop
bugs with error conditions.
* camel-stream-b64.[ch] (camel_stream_b64_write_to_stream): Removed.
This has nothing to do with stream-b64, so i've moved it to
CamelStream.
* camel-mime-utils.h: Add a comment about refcounting
header_content_type struct.
* Makefile.am: Added camel-stream-filter*.[ch].
* camel-stream-filter.[ch]: Class to implement a generic
(multipass) filter ontop of a stream. Only implements a read-only
stream.
* camel-mime-parser.c (camel_mime_parser_filter_add): Ref the
filter we just added.
* Makefile.am: Added camel-mime-filter*.[ch].
* camel-mime-filter-charset.[ch]: A filter to preform character set
conversion (uses unicode_iconv).
* camel-mime-filter-save.[ch]: A simple filter which will save all
data directly to a file or file descriptor.
* camel-mime-filter-basic.[ch]: Implements the basic mime filters,
base64 and quoted-printable decoding (encoding not implemented yet).
* camel-mime-filter.[ch]: A filtering class, which can filter streams
of data without having to copy them. Simpler than stream classes,
and can be plugged into a single stream class (when i write it).
2000-04-07 Dan Winship <danw@helixcode.com>
* providers/pop3/camel-pop3-store.c (pop3_connect): Clarify error
messages.
(finalize): fix a bug in camel_exception usage
(pop3_connect): Remember the password after asking for it the
first time.
2000-04-07 NotZed <NotZed@HelixCode.com>
* Makefile.am: Added camel-mime-parser/camel-mime-utils.
* camel-mime-parser.c: Fast mime parser.
* camel-mime-utils.c: Mime utility functions, and email header
parsers.
2000-04-07 NotZed <NotZed@HelixCode.com>
* providers/Makefile.am: Removed smtp for now, its a long way from
building.
* providers/smtp/Makefile.in: Removed file that shouldn't have been
checked in.
2000-04-06 Matt Loper <matt@helixcode.com>
* camel-folder-pt-proxy.c (_get_full_name): Remove exception param
from get_full_name() called, since get_full_name() was changed to
not have an exception in the last param (see dan's notes below).
(_get_name): same.
2000-04-06 Dan Winship <danw@helixcode.com>
* camel-store.[ch]: Reorganize the folder-fetching methods and
implement a folder cache so that multiple requests for the same
folder will yield the same CamelFolder object (as long as it
remains active). Includes some code to remove no-longer-active
folders from the cache, but it doesn't get used since nothing is
ever unref'ed in Camel right now...
* providers/mbox/camel-mbox-store.c:
* providers/pop3/camel-pop3-store.c: update for CamelStore
changes.
* camel-folder.[ch]: Remove the (unused) CamelException argument
from camel_folder_get_name and camel_folder_get_full_name.
(camel_folder_set_name): make this go away since changing a
folder's name after it has been created could result in it
conflicting with a separately-issued folder.
2000-04-05 Dan Winship <danw@helixcode.com>
* g_url_new really wanted to take a CamelException. So, rename
Gurl to CamelURL, g_url_* to camel_url_* (with camel_url_new
taking an exception), and url-util.[ch] to camel-url.[ch]. Also
force url->port to be numeric and remove camel_service_getport. (I
was confused before: the URL RFC says the port must be numeric, so
we don't want to do getportbyname.)
2000-04-01 Dan Winship <danw@helixcode.com>
* providers/mbox/camel-mbox-folder.c
(_check_get_or_maybe_generate_summary_file): Compare
mbox_file_size and mbox_modtime to the results of stat()ing the
mbox file, not the summary file. Duh.
(_close): Update the summary's mbox_file_size and mbox_modtime
before writing it to disk.
* providers/mbox/camel-mbox-summary.c (camel_mbox_summary_save,
camel_mbox_summary_load): Wow. I must have been tired when I wrote
this code. First, the comparison bug above. Second, it was using
ntohs and htons instead of ntohl and htonl. Third, I was reading
the status flag byte in two different places and thus getting out
of sync. Fourth, it was writing out field_length bytes of each
header field after having converted field_length to network byte
order, resulting in lots of random crap being appended, and the
summary files being huge. (Fortunately, since the size/modtime
comparison was biffed, the garbage summary read from disk was
always immediately discarded.)
* providers/mbox/camel-mbox-parser.c (camel_mbox_parse_file): fix
an off-by-one error that caused the last-used UID to be reused if
the summary file was regenerated. (That one wasn't my fault. :-)
2000-03-31 Dan Winship <danw@helixcode.com>
* camel-stream-mem.c: implement unimplemented methods
* gmime-content-field.c
(gmime_content_field_construct_from_string):
* data-wrapper-repository.c
(data_wrapper_repository_get_data_wrapper_type):
* camel-simple-data-wrapper.c (my_write_to_stream):
* camel-mime-part.c (my_set_input_stream):
remove debugging printf()s that no longer seem useful.
2000-03-31 Matt Loper <matt@helixcode.com>
* camel-formatter.c (text_to_html): Added "convert_newlines_to_br"
boolean param, to give the option of not converting '\n's to <br>
tags. This way, when we stick stuff in a <pre> tag, newlines stay
newlines.
2000-03-30 Matt Loper <matt@helixcode.com>
* camel-formatter.c (handle_text_plain): Use <pre> tag to force
the use of monospaced fonts.
2000-03-30 Dan Winship <danw@helixcode.com>
* camel-service.c (camel_service_getport): Add a htons in the
default_number case, and document the fact that the function
returns the port in network byte order.
* providers/pop3/camel-pop3-store.c (pop3_connect): Revert
Miguel's change. The port number bug was actually somewhere
else, and the IP address copying code was fine already.
2000-03-29 Miguel de Icaza <miguel@gnu.org>
* providers/pop3/camel-pop3-store.c (pop3_connect): Add htons
(port), and only copy 4 bytes for the IP address to prevent a DNS
attack.
2000-03-28 Dan Winship <danw@helixcode.com>
* camel-seekable-substream.c
(camel_seekable_substream_new_with_seekable_stream_and_bounds):
make this return a CamelStream rather than a
CamelSeekableSubstream, because that's the way Gtk objects tend to
work.
* camel-service.c (camel_service_gethost,
camel_service_getport): convenience functions to canonicalize
the host and port values of a service's URL.
* providers/pop3/camel-pop3-store.c: use them
* providers/mbox/camel-mbox-folder.c
(_check_get_or_maybe_generate_summary_file): Make this work when
the inbox file doesn't yet exist.
2000-03-27 Dan Winship <danw@helixcode.com>
* providers/mbox/camel-mbox-folder.c (_append_message): uncomment
the call to unlink the temp file: there's no way to tell
camel_stream_fs to truncate a file, so reusing the same file was
resulting in junk at the ends of messages.
* camel-folder.[ch]: add delete_message_by_{number,uid}.
* providers/pop3/camel-pop3-folder.[ch]: implement
delete_message_by_uid. Add a close method to do expunging
of deleted messages if requested.
* providers/pop3/camel-pop3-store.[ch]: support for
CamelPop3Folder::close. (You have to close the connection
in order to expunge the folder, thus the store may be
connected in the CamelService::is_connected sense when it
is not actually connected to the server.) Also some bugfixes.
2000-03-27 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-folder.c (_append_message): Unref the
output_stream when done, close doesn't do it.
(_append_message): Clear all uid's from the appending messages, so
they are reassigned proper unique id's.
* gmime-utils.c (get_header_array_from_stream): Actually free the
header, it is copied elsewhere.
2000-03-26 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Added
folder parameter to function. Fixed callers.
(index_message): Index a message as it is assigned a unique id.
* camel-mime-part.c (my_set_content_id): Make sure we malloc and
copy the content_id, otherwise *poof*
2000-03-25 NotZed <NotZed@HelixCode.com>
* camel-medium.c (_finalize): Another leak, unref the content if
finished with it.
* camel-recipient.c (camel_recipient_table_free): Plug another
memory leak - actually free the recipient table.
* camel-mime-message.c (_finalize): Plugged a memory leak with the
flags table.
* gmime-utils.c (_store_header_pair_from_string): A simpler, more
debuggable and functionally identical header extraction function.
2000-03-24 NotZed <NotZed@HelixCode.com>
* gmime-content-field.c (gmime_content_field_set_parameter):
Remove the hash table entry before freeing its key and data.
2000-03-27 Dan Winship <danw@helixcode.com>
* providers/Makefile.am (SUBDIRS): Add pop3.
* providers/pop3/camel-pop3-store.c: keep separate input and
output streams so the output doesn't end up being buffered.
* providers/pop3/camel-pop3-folder.c (get_message_by_number):
finish implementing this.
2000-03-27 Michael Meeks <michael@helixcode.com>
* camel-mime-part.c (my_set_disposition): fix so less broken.
(my_finalize): remove dodgy disposition free.
* camel-data-wrapper.c (my_set_mime_type_field): unref instead of
free on mime_type.
2000-03-27 Dan Winship <danw@helixcode.com>
* camel-service.c (camel_service_free_auth_types): new routine to
free the data allocated by camel_service_query_auth_types.
* providers/pop3/camel-pop3-store.c (free_auth_types): implement
* camel-stream-mem.c (camel_stream_mem_new_with_buffer): rename
camel_stream_mem_new_with_buffer to ..._with_byte_array and add a
new ..._with_buffer that takes a char * rather than a GByteArray.
* Remove CamelStreamBufferedFs, since CamelStreamBuffer makes it
redundant.
2000-03-25 Dan Winship <danw@helixcode.com>
* camel-folder-summary.[ch]: change the CamelFolderSummary
interfaces to allow partial summary queries (for dealing
with very large folders). Remove the "extended_fields" from
CamelFolderInfo and CamelMessageInfo: this is better dealt
with by subtyping.
* providers/mbox/camel-mbox-summary.[ch]: Make CamelMboxSummary a
subclass of CamelFolderSummary. Update interfaces for that. Remove
the internal/external summary distinction. Remove the (unused) md5
checksum in the folder summary. Change the summary file format
(primarily to make it no longer byte-order dependent) and add a
version number to it so it will be easier to change in the future.
* providers/mbox/camel-mbox-folder.[ch]
* providers/mbox/camel-mbox-search.c
* providers/mbox/camel-mbox-utils.c: update for summary changes
* camel-exception-list.def: add
CAMEL_EXCEPTION_FOLDER_SUMMARY_INVALID
2000-03-23 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-provider.c: Added flag to provider
initialisation, to match changed structure.
2000-03-22 NotZed <NotZed@HelixCode.com>
* camel-folder.[ch]: Added async search api.
* providers/mbox/camel-mbox-search.c
(camel_mbox_folder_search_by_expression): Changed to use an
asynchronous interface.
(camel_mbox_folder_search_cancel): Cancel function for async
interface.
2000-03-23 Dan Winship <danw@helixcode.com>
* camel-stream-buffer.c (camel_stream_buffer_read_line): Function
to read one line of any size from a stream and return it in
allocated memory.
2000-03-22 Dan Winship <danw@helixcode.com>
* camel-service.c (camel_service_query_auth_types): New function
to query a service for the authentication protocols it supports.
* providers/pop3/camel-pop3-store.c (query_auth_types): implement
* camel-provider.c (camel_provider_scan): New function to
scan the provider dir and return a list of all providers.
* providers/pop3/camel-pop3-folder.c: fill this in partially
* providers/pop3/camel-pop3-store.c: make camel_pop3_command
return the text after "+OK"/"-ERR" and add a separate
camel_pop3_get_additional_data to get the message body or
whatever. Also make them take a CamelPop3Store rather than
a CamelStreamBuffer.
2000-03-22 Matt Loper <matt@helixcode.com>
* camel-formatter.c (debug): Disabled some useless debug
messaging.
2000-03-21 Dan Winship <danw@helixcode.com>
* providers/pop3: some initial bits of the POP3 provider, to
make Matt happy. Incomplete, untested, etc.
2000-03-21 bertrand <bertrand@helixcode.com>
* providers/mbox/camel-mbox-summary.c
(camel_mbox_summary_append_internal_to_external): copy the size field
* providers/mbox/camel-mbox-folder.c (_get_message_by_uid): initialize
message_info to NULL
* camel-folder-summary.h: added the size field.
* providers/mbox/camel-mbox-summary.h:
added the received_date field.
* providers/mbox/camel-mbox-summary.c:
documented all functions.
* camel-folder-summary.h: name change and
new fields.
* providers/mbox/camel-mbox-search.c: update to
conform to name change in the summary fields.
2000-03-10 bertrand <bertrand@helixcode.com>
* camel-service.h: cosmetic changes.
2000-03-09 Dan Winship <danw@helixcode.com>
* s/HelixCode/Helix Code, Inc./ in the copyrights
2000-03-07 bertrand <bertrand@helixcode.com>
* camel-formatter.c (handle_mime_part):
plug mem leaks due to bad documentation
of camel_content_field_get_mime_type
(print_camel_body_part): idem
(handle_multipart_alternative): idem
* gmime-content-field.c (gmime_content_field_get_mime_type):
documentation fix.
* camel-mime-part.c (my_finalize): unref the
content_input_stream if any.
2000-03-06 bertrand <bertrand@helixcode.com>
* camel-stream-fs.c (_seek): fix a bogus calculation
in the return position.
2000-03-05 bertrand <bertrand@helixcode.com>
* camel-session.h: cosmetic fixes.
* camel-stream-fs.c (_read):
(_seek): fixed the current position so that it refers
to the current position in the stream, not in its parent.
2000-03-04 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-search.c
(camel_mbox_folder_search_by_expression): Ref the summary
after we have got it.
2000-03-04 bertrand <bertrand@helixcode.com>
* camel-mime-part.c (my_write_content_to_stream):
stream the raw content instead of nothing if the encoding
is not supported.
* camel-stream-fs.c (_seek): handle eos more
properly.
* camel-formatter.c (get_bonobo_tag_for_object):
bonobo-goad-id is the good key to look for.
(get_bonobo_tag_for_object): close the <object> tag.
(get_bonobo_tag_for_object): the correct syntax for the
to set a parameter inside an <object> tag is :
<object classid="..."> <param name="uid" value="..."> <param ...>
</object>
2000-03-03 bertrand <bertrand@helixcode.com>
* providers/mbox/camel-mbox-folder.c (_get_message_by_uid):
use set_input_stream instead of construct_from_stream
to feed the message object.
* camel-data-wrapper.c (my_write_to_stream): reset output stream.
(my_set_input_stream): unref the previous input stream.
use the set_output_stream for default behaviour.
(my_set_output_stream): unref previous output stream.
* camel-mime-part.c (my_write_content_to_stream): reset content
object output stream.
2000-03-03 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev): Make
sure we open with create with a creation mask.
2000-03-01 NotZed <NotZed@HelixCode.com>
* camel-mime-part-utils.c
(camel_mime_part_construct_content_from_stream): DO NOT assert on
content type, we have fallback code 4 lines below it ... *sigh*
2000-02-29 NotZed <NotZed@HelixCode.com>
* Makefile.am (libcamelinclude_HEADERS): Added camel-stream-buffer
to build.
* camel-stream-buffer.[ch]: Generic buffer which can be applied to
any stream.
2000-03-03 bertrand <bertrand@helixcode.com>
* camel-formatter.c (handle_image): in the case
of images, put the content object output stream
in the url. This allows the message browser
to show inline images.
* camel-stream-b64.c (my_read_encode): fixed state
0 keep value.
2000-03-02 bertrand <bertrand@helixcode.com>
* camel-stream-b64.c (my_read_encode): don't forget to
set the state to 0 after 3.
(my_read_encode): don't forget to encode, even in state 3.
* camel-simple-data-wrapper.c: static functions are prefixed
with my_ instead of _
* camel-multipart.c: static functions are prefixed
with my_ instead of _
(my_write_to_stream): commented.
(my_write_to_stream): warning in case the boudary is set
but is a zero length string.
* camel-mime-part.c (camel_mime_part_encoding_from_string):
remove debug trace.
* camel-mime-part.c: Replaced all static functions
with name begining with _ by the same name begining
with "my_" to prevent the possible conflicts
with system symbols Dan warned us about.
* camel-stream-b64.c (camel_stream_b64_write_to_stream):
use CamelStreamB64 type for the input stream.
* camel-mime-part.c (_get_content_object): remove
debugging trace
(_write_content_to_stream): implement the b64
encoding the new way (that is using camel_stream_b64)
* camel-data-wrapper.c (my_write_to_stream):
fix implementation so that it writes properly
to the output stream even.
* camel-stream-b64.c (camel_stream_b64_write_to_stream):
fix implementation.
2000-02-29 bertrand <bertrand@helixcode.com>
* camel-stream-b64.c (camel_stream_b64_write_to_stream): new
utility function.
* camel-data-wrapper.c (_write_to_stream): default
implementation.
* gmime-utils.c (_store_header_pair_from_string):
revert strange changes.
* camel-stream-b64.c (my_read_decode): set eos to true when we
have read the whole input stream.
(my_reset): set eos to FALSE.
2000-02-28 NotZed <NotZed@HelixCode.com>
* camel-mime-part.c (_parse_header_pair): Dont free this either.
* camel-medium.c (_remove_header): Ugh, dont free the header
before we actually remove it.
(_add_header): Ugh, dont free hashtable entries which may be
duplicated (hash_insert _will_ reference that memory).
* string-utils.c (string_trim): Trimming a 0-length string is not
an error.
* camel-mime-message.c (_parse_header_pair): Fixed very broken
memory handling of header_name/value.
* providers/mbox/camel-mbox-utils.c (camel_mbox_write_xev):
Initialise end_of_last_message always.
(camel_mbox_copy_file_chunk): Stop trying to read if we run out of
data, rather than looping forever.
(camel_mbox_write_xev): Use an open flag when opening with create.
* camel-folder.c (camel_folder_search_by_expression): No, its not
a fatal error to search on a non-searchable folder, you just dont
get any matches.
(_open): Dont open an opened folder (i dont see why this is really
a bug, but what the hell ...)
* providers/mbox/camel-mbox-folder.c (_init): Set search cap on.
(_open): Call parent class to perform open. Remove folder-open
check to parent instead.
(_create): open takes a creation mask, dont use umask to try and
set the open mode.
(_delete): Dont bother checking folder==NULL, its already been
checked on the external interface (changed to an assertion, this
would have to be a camel bug).
(_delete_messages): Likewise.
(_create): Ditto.
(_init): Dont go and clear all the paths and shit that the parent
open just setup for us.
(_delete_messages): Get rid of more umask stuff.
(_append_message): Make sure we pass file mode to open with create.
(_append_message): Cleaned up some indenting to make it readable.
* camel-stream-b64.c (my_read_encode): Fixed a typo.
* providers/mbox/camel-mbox-search.c: Changed to use e-sexp,
rather than filter-sexp.
2000-02-28 bertrand <bertrand@helixcode.com>
* camel-stream-b64.c (my_read_encode): encoding
filter.
2000-02-23 bertrand <Bertrand.Guiheneuf@aful.org>
* camel-stream-b64.c: changed the __static
suffix into a my_ prefix.
(camel_stream_b64_set_mode): reset the persistent
status.
(my_read_decode): remove superfluous %
* providers/mbox/camel-mbox-utils.c (camel_mbox_copy_file_chunk):
fix exception description message.
2000-02-24 Dan Winship <danw@helixcode.com>
* camel-session.c: Add camel_session_get_transport_for_protocol.
* camel-transport.h:
* camel-transport.c: Add an abstract CamelTransport class.
* providers/sendmail/*: A CamelTransport that uses sendmail
to deliver mail.
2000-02-24 Dan Winship <danw@helixcode.com>
* camel-folder.c: use CamelExceptions for run-time errors, not
incorrect code. Don't bother validating that an object exists from
inside one of its methods, since you couldn't have gotten there if
it didn't. Fix some code style bugs.
(_init): Rename init_with_store to init and add parent_folder,
separator, and name arguments.
(_set_name): Get separator from self, not parent_store now.
* camel-store.h:
* camel-store.c: Remove get/set_separator.
* providers/mbox/: Update for above.
2000-02-23 Dan Winship <danw@helixcode.com>
* camel-medium.c (_finalize): Free the data in the headers hash
table.
(_add_header): g_strdup the header name and value when adding it.
* camel-mime-part-utils.c
(camel_mime_part_construct_headers_from_stream): Free the header
data after calling camel_medium_add_header, since it will have
g_strdup()ed it itself.
2000-02-22 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-search.c: Dont compile by default.
* providers/mbox/Makefile.am: Fuck off the filter code.
2000-02-22 bertrand <Bertrand.Guiheneuf@aful.org>
* camel-stream-b64.c (read_decode__static):
don't read the char if we reached the length
of the output buffer. Hours lost on this
%$!@# bug : 3.5
* camel-folder.c (camel_folder_get_subfolder):
(camel_folder_create):
(camel_folder_delete):
(camel_folder_delete_messages):
(camel_folder_list_subfolders):
(camel_folder_expunge):
(camel_folder_get_message_by_number):
(camel_folder_get_message_count):
(camel_folder_append_message):
(camel_folder_copy_message_to):
(camel_folder_get_summary):
(camel_folder_get_message_uid):
(camel_folder_get_message_by_uid):
(camel_folder_get_uid_list):
Check folder state (open/close) and raise an
exception if it is not ok.
* providers/mbox/camel-mbox-folder.c (_create):
create the file and the path with two different
names.
* camel-folder.c (_create): handle the case
when the folder name starts with '/'
* camel-exception.c (camel_exception_new): use
(void) instead of () in decl.
* camel-exception.h: cosmetic fixes.
* camel-exception.c (camel_exception_init): new routine.
Fix a bug in mail/message-list.c
* camel-folder.h: cosmetic changes.
* camel-stream-b64.c (reset__static): added a
reset method. Thanks message-browser to find
so much bugs :)
* providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): readd
Unicode libs.
2000-02-21 bertrand <Bertrand.Guiheneuf@aful.org>
* camel-formatter.c (lookup_unique_id):
awful hack to test get_output_stream.
* camel-stream-b64.[ch] :
b64 encoding/decoding is now implemented as
a stream.
2000-02-21 bertrand <Bertrand.Guiheneuf@aful.org>
* camel-seekable-substream.c (_reemit_parent_signal):
emit "data_available" when parent stream emits it.
2000-02-21 NotZed <NotZed@HelixCode.com>
* providers/mbox/Makefile.am: Uh, fixed LIBADD again. What was
there was never ever going to work, wasn't it tested?
2000-02-21 Dan Winship <danw@helixcode.com>
* camel-session.h: (struct _CamelSession): Add authenticator.
* camel-session.c (camel_session_new): Add authenticator.
(camel_session_query_authenticator): New function to query the
session authenticator for password, etc, information.
2000-02-21 Dan Winship <danw@helixcode.com>
* camel-session.c: add CamelExceptions to several functions. Use
camel_session_new to initialize the session and URL fields of
created CamelStores as appropriate.
* camel-store.h:
* camel-store.c
* camel-service.h:
* camel-service.c: Move the session and url (and associated
functions) from CamelStore to CamelService. Add url_flags to
CamelService so subclasses can specify which URL components
are mandatory for them. Add camel_session_new for
camel_session_get_store* to use.
* providers/mbox/camel-mbox-folder.c:
* providers/mbox/camel-mbox-store.c:
* providers/mbox/camel-mbox-store.h: Update for above changes.
* camel-exception-list.def: Once camel is being used for real,
exceptions won't be renumberable. So renumber them now to make
more room to add exceptions to the various categories later, and
add a big warning message.
2000-02-20 Dan Winship <danw@helixcode.com>
* providers/mbox/Makefile.am: add libibex back to
libcamelmbox_la_LIBADD
2000-02-18 NotZed <NotZed@HelixCode.com>
* providers/mbox/camel-mbox-search.h
(camel_mbox_folder_search_by_expression): Added exception to call,
and fixed caller.
* providers/mbox/camel-mbox-search.c
(camel_mbox_folder_search_by_expression): Major changes, to use
the sexp evaluator from filter/filter-sexp.c to implement the
searching.
(func_body_contains): Changed to support multiple strings in 1
command (results or'd together)
* url-util.c (g_url_new): Fixed a typo (colon == 0 isn't right),
and made it so full url's are absolute pathed (Dan, this is how it
has to work!). Also, always include a path part, even if it is an
empty string.
2000-02-18 Dan Winship <danw@helixcode.com>
* camel/camel-types.h: New header with the typedefs for all camel
classes. Now the class headers can just include this and the
header for the parent type. This makes it possible for
CamelService to include a CamelSession without creating an
#include loop.
* camel/*:
* composer/e-msg-composer-attachment-bar.h:
* mail/folder-browser.c:
* mail/message-list.c: frob #includes to match the new reality
2000-02-17 Dan Winship <danw@helixcode.com>
* camel/camel-service.h:
* camel/camel-service.c: Make camel-service us a Gurl internally.
Remove the login/password interfaces and instead provide
camel_service_connect_with_url. Add CamelExceptions
2000-02-17 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/camel-formatter.c (handle_text_plain):
(handle_text_html): use camel_stream_reset instead
of seek. The formatter should be able to work
with all streams, not only seekable streams.
In the case where some provider implementation
would not be able to provide a reset method
to their stream, implementors would have
to find a workaround.
* camel/camel-session.c (camel_session_new): use
(void) instean of () in function decl.
* camel/camel-folder.c: ifdef async operation
related code.
* camel/camel-seekable-stream.c (_seek): added a warning.
(_reset): default implementation of reset for seekable
stream.
* camel/camel-mime-message.h: set_received_date declaration fix.
cosmetic changes.
* camel/providers/mbox/camel-mbox-provider.c (camel_provider_module_init):
use (void) instead of ().
* camel/camel-stream.c (camel_stream_reset):
new method for CamelStream.
2000-02-17 Dan Winship <danw@helixcode.com>
* camel/url-util.c (g_url_to_string): New function to convert
a Gurl back into a char *.
2000-02-17 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/camel-formatter.c (handle_text_plain):
revamped so that it uses the output stream
of the data wrapper
(handle_text_html): ditto.
* camel/camel-simple-data-wrapper.h:
* camel/camel-simple-data-wrapper.c (camel_simple_data_wrapper_new):
use (void) instead of ().
(_get_output_stream): simple implementation.
2000-02-16 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/camel-data-wrapper.c (_set_input_stream): ref input stream
(_set_output_stream): ref output stream
(_finalize): unref input and output streams
* camel/camel-seekable-substream.c (_set_bounds): don't
seek the begining of the substream.
(_eos): fix eos condition testing.
(_finalize): unref parent stream
(_init_with_seekable_stream_and_bounds): ref parent stream
* camel/gstring-util.c (g_string_equal_for_hash):
(g_string_equal_for_glist): return type is int.
* camel/camel.h:
* camel/camel.c (camel_init): use (void)
instead of ().
2000-02-16 NotZed <NotZed@HelixCode.com>
* providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Added
libfilter to link line (temporarily?). Required for
filter-sexp.
2000-02-15 bertrand <bertrand@helixcode.com>
* camel/camel-multipart.c (_localize_part):
this routine replaces the _read_part routine
and does not store the part in a buffer.
(_set_input_stream): use the set_input_stream
instead of the construct_from_stream.
each bodypart is given an input stream.
* camel/camel-mime-part-utils.c:
include the data-wrapper-repository header.
(camel_mime_part_construct_content_from_stream):
use the set_input_stream instead of the
construct_from_stream method.
* camel/camel-seekable-substream.c (_set_bounds):
cur position is set to 0 not to inf_bound.
2000-02-15 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/camel-mime-part.c: include gmime-base64.h
various compilation and runtime fixes.
(_set_input_stream): store the input substream
for the content object.
* camel/camel-data-wrapper.h: declare the
set/get function on input/output stream.
* camel/camel-mime-part.c (_get_content_object):
don't use a temporary mem stream.
* camel/camel-seekable-substream.c (_seek):
(_eos):
(_read): the substream can be unlimited in length
* camel/camel-data-wrapper.c (camel_data_wrapper_class_init):
set the get/set_input/output_stream methods.
* camel/camel-multipart.c (_construct_from_stream):
camel_stream_seek -> camel_seekable_stream_seek
2000-02-14 Miguel de Icaza <miguel@gnu.org>
* camel/providers/mbox/Makefile.am (libcamelmbox_la_LIBADD): Add
the unicode libraries as well.
* camel/camel-provider.c (camel_provider_register_as_module): Add
error reporting here. Desire to use Solaris increases. Hair loss
in the last two hours: 5,400.
* camel/providers/mbox/camel-mbox-provider.c
(camel_mbox_get_provider): Renamed function.
* camel/camel.h: All include files use camel/ now here.
* camel/providers/mbox/Makefile.am: Drop all the dynamism from
Camel, and make this a standard library.
2000-02-14 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/gmime-utils.c (get_header_array_from_stream): use the
eos stream method.
(gmime_read_line_from_stream): ditto.
* camel/camel-stream-fs.h (struct ): add the eof field
cosmetics changes.
* camel/camel-stream-fs.c (camel_stream_fs_init): set eof.
(_read): set eof on end of file.
(_eos): implemented.
* camel/gmime-utils.c (get_header_array_from_stream):
make a blocking version of the header parser.
When the fs stream uses gnome-vfs, this should
be changed.
(gmime_read_line_from_stream): ditto.
2000-02-11 bertrand <Bertrand.Guiheneuf@aful.org>
* camel/camel-stream-fs.c:
everywhere, when using the cur_pos field, do it
on the CamelSeekableStream object.
(_seek): small fix.
* camel/camel-seekable-stream.c (camel_seekable_stream_seek):
s/camel_stream_seek/camel_seekable_stream_seek/g
* camel/camel-seekable-stream.h:
(struct ): added a field to store the
current position.
* camel/camel-seekable-stream.c (camel_seekable_stream_get_current_position):
New function. Allows to get the current position
of a seekable stream.
2000-02-13 NotZed <notzed@zedzone.helixcode.com>
* providers/mbox/camel-mbox-search.c: New file, implements the
search api for mbox folders.
* providers/mbox/Makefile.am: Link with ibex.
* camel-folder.c (camel_folder_has_search_capability): Api
additions.
(camel_folder_search_by_expression): Ditto.
2000-02-12 NotZed <notzed@zedzone.helixcode.com>
* providers/mbox/camel-mbox-folder.c (_set_name): Setup index
filename as well.
(_init_with_store): Init index filename. Hmm, none of these
names ever seem to get free'd (FIXME?)
* providers/mbox/camel-mbox-folder.h: Add index file name.
2000-02-12 NotZed <notzed@helixcode.com>
* camel-folder.h: Add folder search functions.
** Created ChangeLog just for camel **
- refer to ../ChangeLog for changes prior to this date.
