/* -*- Mode: C; tab-width: 8; indent-tabs-mode: t; c-basic-offset: 8 -*- */
/* Control applet ("capplet") for the gnome-pilot address conduit, */
/* based on */
/* gpilotd control applet ('capplet') for use with the GNOME control center */
#include <pwd.h>
#include <sys/types.h>
#include <signal.h>
#include <gnome.h>
#include <config.h>
#include <capplet-widget.h>
#include <libgpilotdCM/gnome-pilot-conduit-management.h>
#include <libgpilotdCM/gnome-pilot-conduit-config.h>
#include <gpilotd/gnome-pilot-client.h>
#include "address-conduit.h"
/* tell changes callbacks to ignore changes or not */
static gboolean ignore_changes=FALSE;
/* capplet widget */
static GtkWidget *capplet=NULL;
/* host/device/pilot configuration windows */
GtkWidget *cfgOptionsWindow=NULL;
GtkWidget *cfgStateWindow=NULL;
GtkWidget *dialogWindow=NULL;
gboolean activated,org_activation_state;
GnomePilotConduitManagement *conduit;
GnomePilotConduitConfig *conduit_config;
AddressbookConduitCfg *origState = NULL;
AddressbookConduitCfg *curState = NULL;
static void doTrySettings(GtkWidget *widget, AddressbookConduitCfg *cfg);
static void doRevertSettings(GtkWidget *widget, AddressbookConduitCfg *cfg);
static void doSaveSettings(GtkWidget *widget, AddressbookConduitCfg *cfg);
//static void readStateCfg (GtkWidget *w, AddressbookConduitCfg *c);
static void setStateCfg (GtkWidget *w, AddressbookConduitCfg *c);
gint pilotId;
CORBA_Environment ev;
static GnomePilotClient *gpc;
/* This array must be in the same order as enumerations
in GnomePilotConduitSyncType as they are used as index.
Custom type implies Disabled state.
*/
static gchar* sync_options[] ={ N_("Disabled"),
N_("Synchronize"),
N_("Copy From Pilot"),
N_("Copy To Pilot"),
N_("Merge From Pilot"),
N_("Merge To Pilot")};
#define SYNC_OPTIONS_COUNT 6
/* Saves the configuration data. */
static void
addressbookconduit_save_configuration(AddressbookConduitCfg *c)
{
gchar prefix[256];
g_snprintf(prefix,255,"/gnome-pilot.d/address-conduit/Pilot_%u/",c->pilotId);
gnome_config_push_prefix(prefix);
gnome_config_set_bool ("open_secret", c->open_secret);
gnome_config_pop_prefix();
gnome_config_sync();
gnome_config_drop_all();
}
/* Creates a duplicate of the configuration data */
static AddressbookConduitCfg*
gcalconduit_dupe_configuration(AddressbookConduitCfg *c) {
AddressbookConduitCfg *retval;
g_return_val_if_fail(c!=NULL,NULL);
retval = g_new0(AddressbookConduitCfg,1);
retval->sync_type = c->sync_type;
retval->open_secret = c->open_secret;
retval->pilotId = c->pilotId;
return retval;
}
static void
doTrySettings(GtkWidget *widget, AddressbookConduitCfg *c)
{
/*
readStateCfg (cfgStateWindow, curState);
if (activated)
gnome_pilot_conduit_config_enable (conduit_config, GnomePilotConduitSyncTypeCustom);
else
gnome_pilot_conduit_config_disable (conduit_config);
*/
if (c->sync_type!=GnomePilotConduitSyncTypeCustom)
gnome_pilot_conduit_config_enable_with_first_sync (conduit_config,
c->sync_type,
c->sync_type,
TRUE);
else
gnome_pilot_conduit_config_disable (conduit_config);
addressbookconduit_save_configuration (c);
}
static void
doSaveSettings(GtkWidget *widget, AddressbookConduitCfg *cfg)
{
doTrySettings(widget, cfg);
addressbookconduit_save_configuration(cfg);
}
static void
doCancelSettings(GtkWidget *widget, AddressbookConduitCfg *c)
{
doSaveSettings (widget, c);
}
static void
doRevertSettings(GtkWidget *widget, AddressbookConduitCfg *cfg)
{
activated = org_activation_state;
setStateCfg (cfgStateWindow, curState);
}
static void
about_cb (GtkWidget *widget, gpointer data)
{
GtkWidget *about;
const gchar *authors[] = {_("Eskil Heyn Olsen <deity@eskil.dk>"),NULL};
about = gnome_about_new (_("Gpilotd address conduit"), VERSION,
_("(C) 1998 the Free Software Foundation"),
authors,
_("Configuration utility for the address conduit.\n"),
_("gnome-unknown.xpm"));
gtk_widget_show (about);
return;
}
/* called by the sync_type GtkOptionMenu */
static void
sync_action_selection(GtkMenuShell *widget, gpointer unused)
{
if (!ignore_changes) {
capplet_widget_state_changed(CAPPLET_WIDGET (capplet), TRUE);
}
}
/* called by the sync_type GtkOptionMenu */
static void
activate_sync_type(GtkMenuItem *widget, gpointer data)
{
curState->sync_type = GPOINTER_TO_INT(data);
if(!ignore_changes)
capplet_widget_state_changed(CAPPLET_WIDGET(capplet), TRUE);
}
static GtkWidget
*createStateCfgWindow(void)
{
GtkWidget *vbox, *table;
GtkWidget *label;
GtkWidget *optionMenu,*menuItem;
GtkMenu *menu;
gint i;
vbox = gtk_vbox_new(FALSE, GNOME_PAD);
table = gtk_hbox_new(FALSE, 0);
gtk_box_pack_start(GTK_BOX(vbox), table, FALSE, FALSE, GNOME_PAD);
label = gtk_label_new(_("Synchronize Action"));
gtk_box_pack_start(GTK_BOX(table), label, FALSE, FALSE, GNOME_PAD);
optionMenu=gtk_option_menu_new();
gtk_object_set_data(GTK_OBJECT(vbox), "conduit_state", optionMenu);
menu = GTK_MENU(gtk_menu_new());
for (i=0; i<SYNC_OPTIONS_COUNT;i++) {
sync_options[i]=_(sync_options[i]);
menuItem = gtk_menu_item_new_with_label(sync_options[i]);
gtk_widget_show(menuItem);
gtk_signal_connect(GTK_OBJECT(menuItem),"activate",
GTK_SIGNAL_FUNC(activate_sync_type),
GINT_TO_POINTER(i));
gtk_menu_append(menu,menuItem);
}
gtk_option_menu_set_menu(GTK_OPTION_MENU(optionMenu),GTK_WIDGET(menu));
gtk_signal_connect(GTK_OBJECT(menu), "selection-done",
GTK_SIGNAL_FUNC(sync_action_selection),
NULL);
gtk_box_pack_start(GTK_BOX(table), optionMenu, FALSE, FALSE, 0);
return vbox;
}
static void
setStateCfg (GtkWidget *w, AddressbookConduitCfg *c)
{
GtkOptionMenu *optionMenu;
GtkMenu *menu;
optionMenu = gtk_object_get_data (GTK_OBJECT(w), "conduit_state");
g_assert (optionMenu != NULL);
menu = GTK_MENU (gtk_option_menu_get_menu (optionMenu));
ignore_changes = TRUE;
/* Here were are relying on the items in menu being the same
order as in GnomePilotConduitSyncType. */
gtk_option_menu_set_history (optionMenu, (int) c->sync_type);
ignore_changes = FALSE;
}
#if 0
static void
readStateCfg (GtkWidget *w, AddressbookConduitCfg *c)
{
/*
GtkWidget *button;
button = gtk_object_get_data(GTK_OBJECT(cfg), "conduit_on_off");
g_assert(button!=NULL);
activated = GTK_TOGGLE_BUTTON(button)->active;
*/
}
#endif /* 0 */
static void
pilot_capplet_setup(void)
{
GtkWidget *frame, *table;
capplet = capplet_widget_new();
table = gtk_table_new(1, 2, FALSE);
gtk_container_border_width(GTK_CONTAINER(table), GNOME_PAD);
gtk_container_add(GTK_CONTAINER(capplet), table);
frame = gtk_frame_new(_("Conduit state"));
gtk_container_border_width(GTK_CONTAINER(frame), GNOME_PAD_SMALL);
gtk_table_attach_defaults(GTK_TABLE(table), frame, 0, 1, 0, 1);
cfgStateWindow = createStateCfgWindow();
gtk_container_add(GTK_CONTAINER(frame), cfgStateWindow);
gtk_signal_connect(GTK_OBJECT(capplet), "try",
GTK_SIGNAL_FUNC(doTrySettings), curState);
gtk_signal_connect(GTK_OBJECT(capplet), "revert",
GTK_SIGNAL_FUNC(doRevertSettings), curState);
gtk_signal_connect(GTK_OBJECT(capplet), "ok",
GTK_SIGNAL_FUNC(doSaveSettings), curState);
gtk_signal_connect(GTK_OBJECT(capplet), "cancel",
GTK_SIGNAL_FUNC(doCancelSettings), curState);
gtk_signal_connect(GTK_OBJECT(capplet), "help",
GTK_SIGNAL_FUNC(about_cb), NULL);
setStateCfg (cfgStateWindow, curState);
gtk_widget_show_all (capplet);
}
static void
run_error_dialog(gchar *mesg,...)
{
char tmp[80];
va_list ap;
va_start(ap,mesg);
vsnprintf(tmp,79,mesg,ap);
dialogWindow = gnome_message_box_new(mesg,GNOME_MESSAGE_BOX_ERROR,GNOME_STOCK_BUTTON_OK,NULL);
gnome_dialog_run_and_close(GNOME_DIALOG(dialogWindow));
va_end(ap);
}
static gint
get_pilot_id_from_gpilotd()
{
GList *pilots=NULL;
gint pilot;
int i,err;
i=0;
/* we don't worry about leaking here, so pilots isn't freed */
switch(err = gnome_pilot_client_get_pilots(gpc,&pilots)) {
case GPILOTD_OK: {
if(pilots) {
for(i=0;i<g_list_length(pilots);i++) {
g_message("pilot %d = \"%s\"",i,(gchar*)g_list_nth(pilots,i)->data);
}
if(i==0) {
run_error_dialog(_("No pilot configured, please choose the\n'Pilot Link Properties' capplet first."));
return -1;
} else {
gnome_pilot_client_get_pilot_id_by_name(gpc,
pilots->data, /* this is the first pilot */
&pilot);
if(i>1) {
g_message("too many pilots...");
/* need a choose here */
}
return pilot;
}
} else {
run_error_dialog(_("No pilot configured, please choose the\n'Pilot Link Properties' capplet first."));
return -1;
}
break;
}
case GPILOTD_ERR_NOT_CONNECTED:
run_error_dialog(_("Not connected to the gnome-pilot daemon"));
return -1;
break;
default:
g_warning("gnome_pilot_client_get_pilot_ids(...) = %d",err);
run_error_dialog(_("An error occured when trying to fetch\npilot list from the gnome-pilot daemon"));
return -1;
break;
}
}
int
main (int argc, char *argv[])
{
g_log_set_always_fatal (G_LOG_LEVEL_ERROR |
G_LOG_LEVEL_CRITICAL |
G_LOG_LEVEL_WARNING);
/* we're a capplet */
gnome_capplet_init ("address conduit control applet", NULL, argc, argv,
NULL, 0, NULL);
gpc = gnome_pilot_client_new();
gnome_pilot_client_connect_to_daemon(gpc);
pilotId = get_pilot_id_from_gpilotd();
if(!pilotId) return -1;
/* put all code to set things up in here */
conduit_load_configuration (&origState, pilotId);
conduit = gnome_pilot_conduit_management_new ("address_conduit", GNOME_PILOT_CONDUIT_MGMT_ID);
if (conduit == NULL) return -1;
conduit_config = gnome_pilot_conduit_config_new (conduit, pilotId);
org_activation_state = gnome_pilot_conduit_config_is_enabled (conduit_config,
&origState->sync_type);
activated = org_activation_state;
//gpilotd_conduit_mgmt_get_sync_type (conduit, pilotId, &origState->sync_type);
curState = gcalconduit_dupe_configuration(origState);
pilot_capplet_setup ();
/* done setting up, now run main loop */
capplet_gtk_main();
gnome_pilot_conduit_management_destroy(conduit);
return 0;
}