2002-11-24 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c (query_for_supported_bases):
show the etable.
(addressbook_add_server_druid): show_all before returning the
dialog, so the druid shows up.
2002-11-23 Chris Toshok <toshok@ximian.com>
[ roll forward from the 1.2 branch. fixes #25540, part of #29630,
as well as other selection issues in the contact editor and ACL
issues in the ldap backend ]
* backend/pas/pas-backend-ldap.c (check_schema_support): reset the
schema check state to FALSE if the read returned nothing (and the
user had not authenticated). we'll requery if/when they auth.
(query_ldap_root_dse): free the schema dn before assigning over
it.
(pas_backend_ldap_connect): added a diagnostic warning about the
root dse query failing in anonymous mode (if it in fact did fail.)
(pas_backend_ldap_process_authenticate_user): if we successfully
authed, requery the root dse to pick up any attributes that might
be protected, and retry the schema query if that failed before.
* gui/contact-editor/e-contact-editor.c (full_name_clicked): set
the dialog's editable state based on the new field
"fullname_editable", and only do the Ok button handling if this
flag is TRUE.
(full_addr_clicked): set the dialog's editable state based on the
editable state for the particular address (from
editor->address_editable[]). also, only do the Ok button handling
if this flag is TRUE.
(_address_arrow_pressed): use the address_editable array to
determine whether the address text and the mailing address
checkbutton are sensitive.
(enable_writable_fields): figure out if fullname_editable is
TRUE/FALSE, also, init the address_editable flags based on the
field list, and handle the address checkbutton.
* gui/contact-editor/fulladdr.glade: change the label names to
label-<name> to match {entry,combo}-<name>.
* gui/contact-editor/fullname.glade: same.
* gui/contact-editor/e-contact-editor-fullname.c
(e_contact_editor_fullname_class_init): rename ARG_IS_READ_ONLY to
ARG_EDITABLE, to reflect the correct sense of the flag.
(e_contact_editor_fullname_set_arg): same, and make the labels
sensitive/insensitive depending on the editable state of the
dialog.
* gui/contact-editor/e-contact-editor-address.c
(e_contact_editor_address_class_init): rename ARG_IS_READ_ONLY to
ARG_EDITABLE, to reflect the correct sense of the flag.
(e_contact_editor_address_set_arg): same, and make the labels
sensitive/insensitive depending on the editable state of the
dialog.
2002-11-22 Chris Toshok <toshok@ximian.com>
[ roll forward Sean.Gao@sun.com's fix for #16870 from the 1.2
branch ]
* backend/ebook/evolution-ldif-importer.c (getNextLDIFEntry):
check for both LR and CRLF as empty line markers.
2002-11-22 Chris Toshok <toshok@ximian.com>
[ rolling forward fix for #34254 from 1.2 branch ]
* backend/ebook/evolution-vcard-importer.c (check_file_is_vcard):
use g-ascii_strncasecmp instead of strncmp.
(support_format_fn): use g_ascii_strcasecmp instead of strcmp.
2002-11-20 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-storage.h: roll forward the scope fix.
2002-11-20 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor.c: roll forward the fix for
the contact editor.
2002-11-21 Not Zed <NotZed@Ximian.com>
* gui/component/select-names/e-select-names-bonobo.c
(entry_changed): Pass type to bonobo_ctonrol_set_property, and
also NULL terminate the valist.
* gui/component/select-names/e-select-names-text-model.c
(changed_cb): Fix signature for signal.
2002-11-19 Ettore Perazzoli <ettore@ximian.com>
* gui/component/select-names/GNOME_Evolution_Addressbook_SelectNames.server.in.in,
* gui/component/select-names/Makefile.am: Same changes as below
for the SelectNames component.
2002-11-18 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_init): show the custom table.
2002-11-18 Chris Toshok <toshok@ximian.com>
* gui/widgets/gal-view-minicard.c (gal_view_minicard_attach):
remove the cast to (int) - column_width is a double.
* gui/widgets/e-minicard.c (e_minicard_class_init): the height
property is only readable, not readwrite.
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_class_init): make column_width a double
property.
(e_minicard_view_widget_set_property): don't cast to (int).
column_width is double in the e-minicard-view.
(e_minicard_view_widget_realize): same.
(e_minicard_view_widget_get_property): use g_value_set_double for
column_width.
2002-11-17 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/Makefile.am (servers_DATA): oops,
missed some "oaf"'s.
2002-11-16 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor.c
(e_contact_editor_build_phone_ui): sink the popup.
(e_contact_editor_build_email_ui): same.
(e_contact_editor_build_address_ui): same.
* gui/component/addressbook-config.c (ldap_dialog_new): show
everything from dialog->page down, so custom widgets show up.
2002-11-15 Ettore Perazzoli <ettore@ximian.com>
* gui/component/Makefile.am: Added rule to generate
GNOME_Evolution_Addressbook.server.in from
GNOME_Evolution_Addressbook.server.in.in, substituting
@LIBEXECDIR@.
* GNOME_Evolution_Addressbook.server.in.in: Renamed from
GNOME_Evolution_Addressbook.server.in. Added @LIBEXECDIR@ before
the location of the executable.
* gui/component/select-names/select-names.glade: Ported to Glade
2.
* gui/component/select-names/recipient.glade: Ported to Glade 2.
2002-11-15 Rodney Dawes <dobey@ximian.com>
* gui/component/addressbook-component.c: Use bonobo_main_quit.
2002-11-14 Chris Toshok <toshok@ximian.com>
* gui/widgets/gal-view-factory-minicard.c: clean this up a tad.
* gui/widgets/e-addressbook-view.c (init_collection): re-enable
this.
(setup_menus): same.
* gui/widgets/gal-view-minicard.[ch]: more GObject work.
2002-11-12 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor.c (_popup_position): push_in
= FALSE, no clue why... :)
(_arrow_pressed): call g_signal_stop_emission here, seems to fix
things.
* gui/component/select-names/e-select-names.c
(e_select_names_init): fix warnings.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_activate_dialog): fix warning.
* gui/component/addressbook.c (forget_passwords_cb): remove the
PENDING_PORT ifdef.
(load_uri_auth_cb): same.
(addressbook_authenticate): same.
* gui/component/addressbook-factory.c (main): same.
* gui/component/addressbook-storage.c (load_source_data): be
silent about text nodes if they contain nothing but whitespace.
2002-11-11 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-card-cursor.c (pas_card_cursor_dispose): guard
against multiple invocations.
* backend/pas/pas-backend-ldap.c (view_destroy): change signature
to that of a weak ref notify function.
(cursor_destroy): same.
(pas_backend_ldap_book_destroy_cb): same.
(get_cursor_handler): ::destroy -> weak_ref.
(pas_backend_ldap_process_get_book_view): same.
(pas_backend_ldap_add_client): same.
* backend/pas/pas-backend-file.c (cursor_destroy): change
signature to that of a weak ref notify function.
(view_destroy): same.
(pas_backend_file_book_destroy_cb): same.
(pas_backend_file_process_get_cursor): ::destroy -> weak_ref.
(pas_backend_file_process_get_book_view): same.
(pas_backend_file_process_get_completion_view): same.
(pas_backend_file_process_get_changes): same.
(pas_backend_file_add_client): same.
* backend/ebook/test-client.c (get_cursor_cb): unref the book and
exit here.
(get_card_cb): pass a query string to get_cursor.
* backend/ebook/e-book-view.c (e_book_view_class_init): correct
marshaller for "card_added".
2002-11-11 Chris Toshok <toshok@ximian.com>
* gui/widgets/test-reflow.c (destroy_callback): change signature
to that of a weak ref notify function.
(main): ::destroy -> weak_ref.
* gui/widgets/test-minicard.c (destroy_callback): change signature
to that of a weak ref notify function.
(main): ::destroy -> weak_ref.
* gui/widgets/test-minicard-view.c (destroy_callback): change
signature to that of a weak ref notify function.
(main): ::destroy -> weak_ref.
* gui/widgets/test-minicard-label.c (destroy_callback): change
signature to that of a weak ref notify function.
(main): ::destroy -> weak_ref.
* gui/widgets/e-minicard-widget.c (e_minicard_widget_init): ifdef
out the call to gnome_canvas_set_scroll_region. It doesn't seem
necessary judging from the rest of the code, and it also crashes
the addressbook if it's in.
* gui/widgets/e-minicard-widget-test.c (destroy_callback): change
signature to that of a weak ref notify function.
(main): ::destroy -> weak_ref.
* gui/widgets/e-minicard-control.c (free_struct): change signature
to that of a weak ref notify function.
(e_minicard_control_factory): ::destroy -> weak_ref.
* gui/widgets/e-addressbook-view.c (e_addressbook_view_init):
::destroy -> weak_ref.
(e_addressbook_view_print): same.
(free_closure): change signature to that of a weak ref notify
function.
(e_contact_print_destroy): same.
(invisible_destroyed): same.
* gui/widgets/e-addressbook-util.c
(e_addressbook_prompt_save_dialog): convert from GnomeDialog to
GtkDialog.
(e_addressbook_show_multiple_cards): same.
* gui/contact-list-editor/e-contact-list-editor.c
(prompt_to_save_changes): change response ids to use
GTK_RESPONSE_.
* gui/component/select-names/e-select-names-manager.c
(clear_widget): new function.
(e_select_names_manager_activate_dialog): ::destroy -> weak_ref.
* gui/component/select-names/e-select-names.c (clear_widget):
change signature to that of a weak ref notify function.
(e_select_names_init): ::destroy -> weak_ref.
* gui/component/e-address-popup.c (mini_wizard_destroy_cb): change
signature to that of a weak ref notify function.
(mini_wizard_new): ::destroy -> weak_ref.
* gui/component/addressbook-config.c
(addressbook_source_dialog_destroy): change signature to that of a
weak ref notify function.
(ldap_config_control_destroy_callback): same.
(addressbook_add_server_druid): ::destroy -> weak_ref.
(addressbook_edit_server_dialog): same.
(ldap_config_control_new): same.
* gui/component/addressbook.c (destroy_callback): change signature
to that of a a weak ref notify function.
(addressbook_factory_new_control): ::destroy -> weak_ref.
* gui/merging/e-card-merging.c (response): rename clicked to this,
and destroy the dialog here.
(match_query_callback): ::clicked -> ::response
* gui/merging/e-card-merging-book-commit-duplicate-detected.glade:
convert.
* gui/merging/e-card-duplicate-detected.glade: same.
2002-11-11 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor.c (_arrow_pressed): change
around a little, still ifdefed though.
* gui/contact-editor/e-contact-save-as.c (file_exists): same.
(save_it): deal with the GtkDialog response ids.
* gui/contact-editor/e-contact-editor.c
(e_contact_editor_confirm_delete): just build the dialog here
(using gtk_message_dialog*).
* gui/contact-editor/Makefile.am (glade_DATA): remove
file-exists.glade and e-contact-editor-confirm-delete.glade.
2002-11-11 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-card-cursor.c (pas_card_cursor_dispose): guard
against multiple invocations.
* backend/pas/pas-backend-ldap.c (view_destroy): change signature
to that of weak ref's notify function - also, don't use the type
check macros on the freed GObject.
(cursor_destroy): same.
(pas_backend_ldap_book_destroy_cb): same.
(pas_backend_ldap_add_client): use weak_ref insteead of ::destroy.
(get_cursor_handler): same.
(pas_backend_ldap_process_get_book_view): same.
* backend/pas/pas-backend-file.c (cursor_destroy): change
signature to that of weak ref's notify function - also, don't use
the type check macros on the freed GObject.
(pas_backend_file_book_destroy_cb): same.
(view_destroy): same.
(pas_backend_file_process_get_cursor): use weak_ref instead of
::destroy.
(pas_backend_file_process_get_book_view): same.
(pas_backend_file_process_get_completion_view): same.
(pas_backend_file_process_get_changes): same.
(pas_backend_file_add_client): same.
2002-11-10 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-card-sexp.c
(pas_backend_card_sexp_dispose): guard against multiple
invocations.
* backend/pas/pas-card-cursor.c (pas_card_cursor_dispose): same.
* backend/pas/pas-book.c (pas_book_dispose): same.
* backend/pas/pas-book-view.c (pas_book_view_dispose): same.
* backend/pas/pas-book-factory.c (pas_book_factory_dispose): same.
* backend/pas/pas-backend-summary.c (pas_backend_summary_dispose): same.
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_dispose): same.
* backend/pas/pas-backend-file.c (pas_backend_file_dispose): same.
* backend/ebook/e-book-listener.c (e_book_listener_dispose): guard
against multiple invocations.
* backend/ebook/e-card.c (e_card_dispose): same.
* backend/ebook/e-card-simple.c (e_card_simple_dispose): same.
* backend/ebook/e-card-cursor.c (e_card_cursor_dispose): same.
* backend/ebook/e-book.c (e_book_dispose): same.
* backend/ebook/e-book-view-listener.c (e_book_view_listener_dispose): same.
2002-11-08 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-model.c (free_data): guard against
multiple invocations.
(remove_book_view): same.
(addressbook_dispose): same.
* gui/widgets/e-addressbook-view.c (e_addressbook_view_dispose):
same.
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_dispose): same.
* gui/widgets/e-minicard-view.c (e_minicard_view_dispose): same.
* gui/widgets/e-minicard-widget.c (e_minicard_widget_dispose):
same.
2002-11-08 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c
(addressbook_get_property): oops, missed these casts.
* gui/component/addressbook.c (get_master_list): remove the
PENDING_PORT_WORK ifdef, just ported ECategoriesMasterList.
(make_suboptions): same.
* gui/contact-editor/e-contact-editor.c (categories_clicked):
same.
2002-11-08 Chris Toshok <toshok@ximian.com>
* gui/widgets/test-reflow.c: port work.
* gui/widgets/test-minicard-view.c: port work.
* gui/widgets/e-minicard.[ch]: port work.
* gui/widgets/e-minicard-widget.c: port work.
* gui/widgets/e-minicard-view.c: port work.
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_size_allocate): gtk_->g_ change i missed.
(e_minicard_view_widget_reflow): same.
* gui/widgets/e-minicard-label.c: port work.
* gui/widgets/e-minicard-control.c (get_prop): gtk_->g_ change i
missed.
* gui/widgets/e-addressbook-view.c (setup_menus): ifdef this
PENDING_PORT_WORK for now.
(has_email_address_1): gtk_->g_ change i missed.
(print): remove the PENDING_PORT_WORK from here, as the print_*
symbols now resolve.
(delete): gtk_->g_ changes.
(new_card): same.
(new_list): same.
(sources): same.
(create_minicard_view): same.
(table_double_click): same.
(create_table_view): same.
(e_contact_print_destroy): same.
(e_contact_print_button): same.
(e_addressbook_view_print): same, and remove the PENDING_PORT_WORK
ifdef.
(e_addressbook_view_print_preview): same.
(do_remove): gtk_->g_ changes.
(e_addressbook_view_save_state): same.
(view_transfer_cards): same.
* gui/widgets/e-addressbook-view.h (struct _EAddressbookView):
GtkObject -> GObject.
* gui/widgets/e-addressbook-util.c (e_addressbook_error_dialog):
GnomeDialog -> GtkDialog.
* gui/widgets/e-addressbook-table-adapter.c
(addressbook_set_value_at): a gtk_->g_ change i missed.
(e_addressbook_table_adapter_class_init): gtk_type_class ->
g_type_class_peek_parent.
* gui/widgets/e-addressbook-reflow-adapter.c
(addressbook_get_property): use g_object_get_property for
aggregated properties.
(e_addressbook_reflow_adapter_class_init): gtk_type_class ->
g_type_class_peek_parent.
* gui/merging/e-card-merging.c (match_query_callback): some misc
gtk_->g_ changes i missed.
2002-11-08 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names-model.h: parent class
is GObjectClass.
* gui/component/select-names/e-simple-card-bonobo.c
(impl_dispose): guard against multiple invocations, and chain
dispose.
* gui/component/select-names/e-select-names.c
(e_select_names_dispose): guard against multiple invocations.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_dispose): guard against multiple
invocations.
(e_select_names_text_model_set_source): fix casts.
* gui/component/select-names/e-select-names-table-model.c
(e_select_names_table_model_add_source): remove the GTK_OBJECT
cast, fixes a warning.
(clear_info): guard against multiple invocations from ::dispose.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_dispose): same.
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_dispose): same.
* gui/component/select-names/e-select-names-bonobo.c
(impl_dispose): guard against multiple invocations.
2002-11-08 Chris Toshok <toshok@ximian.com>
* gui/contact-list-editor/contact-list-editor.glade: convert to glade-2
* gui/contact-list-editor/e-contact-list-editor.c: port work.
* gui/contact-list-editor/e-contact-list-model.[ch]: port work.
2002-11-08 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor-address.[ch]: port work.
* gui/contact-editor/e-contact-editor-fullname.[ch]: port work.
* gui/contact-editor/e-contact-editor.[ch]: port work.
* gui/contact-editor/e-contact-quick-add.c: port work.
* gui/contact-editor/e-contact-save-as.c: port work.
2002-11-08 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book-util.c
(set_default_book_uri_from_config_db): prepend /apps/Evolution to
config db paths.
* gui/component/select-names/e-select-names-manager.c (read_completion_books_from_db): same.
(uris_listener): same.
2002-11-08 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor.c: more porting work.
* e-contact-editor-fullname.[ch]: more porting work.
* e-contact-editor.c: more porting work.
* e-contact-quick-add.c: more porting work.
* e-contact-save-as.c: more porting work.
* test-editor.c: more porting work.
* e-contact-editor-confirm-delete.glade, file-exists.glade,
fulladdr.glade, fullname.glade: run these through
libglade-convert.
2002-11-07 Chris Toshok <toshok@ximian.com>
* gui/component/Makefile.am (evolution_addressbook_LDADD): add
lots of libs back in since they're building now.
* gui/component/addressbook-config.c: more porting work.
* gui/component/addressbook.c: more porting work.
* gui/component/e-address-popup.[ch]: more porting work.
* gui/component/e-address-widget.[ch]: more porting work.
* gui/component/e-cardlist-model.[ch]: more porting work.
2002-11-07 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names-bonobo.[ch]: more
porting work.
* gui/component/select-names/e-select-names-completion.[ch]: more
porting work.
* gui/component/select-names/e-select-names-manager.[ch]: more
porting work.
* gui/component/select-names/e-select-names-model.[ch]: more
porting work.
* gui/component/select-names/e-select-names-popup.c: more
porting work.
* gui/component/select-names/e-select-names-table-model.[ch]: more
porting work.
* gui/component/select-names/e-select-names-text-model.[ch]: more
porting work.
* gui/component/select-names/e-select-names.[ch]: more
porting work.
2002-11-07 Chris Toshok <toshok@ximian.com>
* backend/ebook/Makefile.am: tests are linking now, and link in
libcamel.la.
* backend/ebook/e-destination.c (e_destination_get_name): un-ifdef
since camel is compiling.
(e_destination_get_email): same.
(e_destination_get_address): same.
(e_destination_get_textrep): same.
* backend/ebook/e-card-compare.c (name_fragment_match): use e_utf8_casefold_*.
(name_fragment_match_with_synonyms): same.
(e_card_compare_name_to_string_full): same.
(e_card_compare_name): same.
2002-11-07 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book-util.h: add prototypes for e_utf8_casefold_collate{_len}
* backend/ebook/e-book-util.c (e_utf8_casefold_collate_len): move
utf8_casefold_collate_len here.
(e_utf8_casefold_collate): move utf8_casefold_collate here.
2002-11-06 Chris Toshok <toshok@ximian.com>
* printing/e-contact-print-envelope.c: port this to
gnome2/gnomeprint2.
* printing/e-contact-print-style-editor.c: same.
* printing/e-contact-print.c: same.
* printing/test-contact-print-style-editor.c: same.
* printing/test-print.c: same.
* printing/e-contact-print.glade: libglade-convert to libglade-2.
* printing/Makefile.am (contact_print_test_LDADD)
(contact_print_style_editor_test_LDADD): remove libcamel.la from
these for the time being to get things linking.
2002-11-06 Chris Toshok <toshok@ximian.com>
* gui/widgets/gal-view-minicard.[ch]: gobjectify this.
* gui/widgets/e-minicard.[ch]: gobjectify this.
(e_minicard_class_init): change the
min/max values of the width/height paramspecs so that they can
actually be set to something other than 0.0.
* gui/widgets/e-minicard-widget.[ch]: gobjectify this.
* gui/widgets/e-minicard-view.[ch]: gobjectify this.
(set_empty_message): don't need e_utf8_from_locale_string anymore.
* gui/widgets/e-minicard-view-widget.[ch]: gobjectify this.
* gui/widgets/e-minicard-label.[ch]: gobjectify this.
* gui/widgets/e-addressbook-view.[ch]: gobjectify this.
* gui/widgets/e-addressbook-table-adapter.[ch]: gobjectify this.
* gui/widgets/e-addressbook-reflow-adapter.[ch]: gobjectify this.
* gui/widgets/e-addressbook-model.[ch]: gobjectify this.
* gui/widgets/e-minicard-control.c (e_minicard_control_factory):
fix bonobo_persist_stream_new api change.
* gui/contact-list-editor/e-contact-list-model.c
(e_contact_list_model_add_destination): get rid of the
gtk_object_sink here.
* gui/component/ldap-config.glade: glade-2 version of this file.
* gui/component/e-address-popup.c (e_address_popup_refresh_names):
don't need e_utf8_to_gtk_string anymore.
* gui/component/addressbook.c (make_suboptions): don't need
e_utf8_to_locale_string anymore.
* gui/component/addressbook-config.c
(addressbook_dialog_get_source): get rid of the e_utf8 gtk_entry
functions.
(addressbook_source_dialog_set_source): same.
(general_tab_check): same.
(port_changed_func): same.
(connecting_tab_check): same.
(query_for_supported_bases): same.
(display_name_check): same.
(display_name_page_prepare): same.
(edit_source_clicked): same.
(addressbook_config_create_new_source): same.
2002-11-06 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-card-sexp.c
(pas_backend_card_sexp_class_init): use g_type_class_peek_parent.
* backend/pas/pas-card-cursor.c (pas_card_cursor_class_init): same.
* backend/pas/pas-book-view.c (pas_book_view_class_init): same.
* backend/pas/pas-book-factory.c (pas_book_factory_class_init): same.
* backend/pas/pas-backend-summary.c (pas_backend_summary_class_init): same.
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_class_init): same.
* backend/pas/pas-backend-file.c (pas_backend_file_class_init): same.
* backend/ebook/e-book-marshal.list: ENUM -> INT.
* backend/ebook/e-book-view.c (e_book_view_dispose): guard against
this being called multiple times.
(e_book_view_class_init): ENUM -> INT in the sequence_complete
signal.
* backend/ebook/e-book.c (e_book_do_response_open): un-ifdef the
component_died signal stuff.
2002-11-06 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book-util.c (e_book_expand_uri): call
g_build_filename, not g_build_path.
2002-11-06 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-destination.[ch]: fix the gnome-xml headers.
2002-11-06 Chris Toshok <toshok@ximian.com>
* gui/widgets/gal-view-minicard.c: fix the gnome-xml headers.
* gui/widgets/e-addressbook-view.c
(e_addressbook_view_class_init): convert from gtk signals and args
to GSignal and GObject properties.
(e_addressbook_view_dispose): rename _destroy to this.
(e_addressbook_view_set_property): rework _set_arg to this.
(e_addressbook_view_get_property): rework _get_arg to this.
(display_view): if we're here we need to choose a view, regardless
of whether or not the GAL_IS_VIEW_* macros tell us which type it
is.
* gui/widgets/e-addressbook-table-adapter.c: fix the gnome-xml
headers.
* gui/widgets/e-addressbook-model.c
(e_addressbook_model_class_init): use INT, not ENUM in the signal here.
* gui/component/addressbook-config.c: another big gtk_* -> g_*
renaming.
* gui/component/addressbook.c: same.
* gui/component/e-address-popup.c: same.
* gui/component/e-address-widget.c: same.
* gui/component/e-cardlist-model.c: fix the gnome-xml headers, and
more gtk_* -> g_* renaming.
* gui/component/addressbook-component.c (owner_set_cb): use
evolution_shell_client_corba_objref as per ettore's change to
EvolutionShellClient..
(create_view): fix the call to bonobo_control_set_property.
(create_component): gtk_signal_connect -> g_signal_connect.
* gui/component/addressbook-storage.c: fix the gnome-xml
headers.
(addressbook_storage_setup): use
evolution_shell_client_corba_objref as per ettore's change to
EvolutionShellClient..
(addressbook_get_other_contact_storage): gtk_signal_connect ->
g_signal_connect.
(load_source_data): root->childs -> root->childrens.
2002-11-06 Chris Toshok <toshok@ximian.com>
* gui/search/e-addressbook-search-dialog.c: fix some #include's.
2002-11-06 Chris Toshok <toshok@ximian.com>
* Makefile.am (SUBDIRS): only build the backend and gui dirs for
now. printing and conduits are no-man's land at present.
* addressbook/gui/merging/e-card-merging.[ch]: Port to
GObject/gnome2.
2002-11-05 Chris Toshok <toshok@ximian.com>
* gui/component/.cvsignore: ignore the new .server file.
* gui/component/Makefile.am: typical port stuff. switch the .oaf
to .server, and leave out a lot of libs so we can actually get
things linking.
* gui/component/GNOME_Evolution_Addressbook.server.in: rename
.oaf.in here.
* gui/component/addressbook-component.c: Port to GObject/gnome2.
* gui/component/addressbook-config.c: Port to GObject/gnome2.
* gui/component/addressbook-factory.c: Port to GObject/gnome2.
* gui/component/addressbook-storage.c: Port to GObject/gnome2.
* gui/component/addressbook.[ch]: Port to GObject/gnome2.
* gui/component/e-address-popup.[ch]: Port to GObject/gnome2.
* gui/component/e-address-widget.[ch]: Port to GObject/gnome2.
* gui/component/e-cardlist-model.h: Port to GObject/gnome2.
2002-11-05 Chris Toshok <toshok@ximian.com>
* gui/contact-list-editor/.cvsignore: ignore the marshal generated
stuff.
* gui/contact-list-editor/Makefile.am: typical port stuff. add
marshaller generation foo, dist it...
* gui/contact-list-editor/e-contact-list-editor.[ch]: Port to
GObject/gnome2.
* gui/contact-list-editor/e-contact-list-model.[ch]: Port to
GObject/gnome2.
2002-11-05 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/.cvsignore: ignore the marshal generated
stuff.
* gui/contact-editor/Makefile.am: typical port stuff. add
marshaller generation foo, dist it...
* gui/contact-editor/e-contact-editor-address.[ch]: Port to GObject/gnome2.
* gui/contact-editor/e-contact-editor-fullname.c: Port to GObject/gnome2.
* gui/contact-editor/e-contact-editor.c: Port to GObject/gnome2.
* gui/contact-editor/e-contact-quick-add.c: Port to GObject/gnome2.
* gui/contact-editor/e-contact-save-as.[ch]: Port to GObject/gnome2.
* gui/contact-editor/test-editor.c: Port to GObject/gnome2.
2002-11-05 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-model.[ch]: Port to GObject/gnome2.
* gui/widgets/e-addressbook-reflow-adapter.c: Port to
GObject/gnome2.
* gui/widgets/e-addressbook-table-adapter.c: Port to
GObject/gnome2.
* gui/widgets/e-addressbook-util.c: Port to GObject/gnome2.
* gui/widgets/e-addressbook-view.[ch]: Port to GObject/gnome2.
* gui/widgets/e-minicard-control.c: Port to GObject/gnome2.
* gui/widgets/e-minicard-label.[ch]: Port to GObject/gnome2.
* gui/widgets/e-minicard-view-widget.[ch]: Port to GObject/gnome2.
* gui/widgets/e-minicard-view.[ch]: Port to GObject/gnome2.
* gui/widgets/e-minicard-widget-test.c: Port to GObject/gnome2.
* gui/widgets/e-minicard-widget.c: Port to GObject/gnome2.
* gui/widgets/e-minicard.[ch]: Port to GObject/gnome2.
* gui/widgets/gal-view-factory-minicard.c: Port to GObject/gnome2.
* gui/widgets/gal-view-minicard.c: Port to GObject/gnome2.
* gui/widgets/test-minicard-label.c: Port to GObject/gnome2.
* gui/widgets/test-minicard-view.c: Port to GObject/gnome2.
* gui/widgets/test-minicard.c: Port to GObject/gnome2.
* gui/widgets/test-reflow.c: Port to GObject/gnome2.
* gui/widgets/Makefile.am: typical port stuff. add marshaller
generation foo, dist it...
* gui/widgets/.cvsignore: ignore the marshaller stuff.
2002-11-05 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-simple-card-bonobo.[ch]: Port to
GObject/gnome2.
* gui/component/select-names/e-select-names.[ch]: Port to
GObject/gnome2.
* gui/component/select-names/e-select-names-text-model.c: Port to
GObject/gnome2.
* gui/component/select-names/e-select-names-table-model.c: Port to
GObject/gnome2.
* gui/component/select-names/e-select-names-popup.[ch]: Port to
GObject/gnome2.
* gui/component/select-names/e-select-names-model.c: Port to
GObject/gnome2.
* gui/component/select-names/e-select-names-manager.[ch]: Port to
GObject/gnome2.
* gui/component/select-names/e-select-names-factory.c: Port to
GObject/gnome2.
* gui/component/select-names/e-select-names-completion.[ch]: Port
to GObject/gnome2.
* gui/component/select-names/e-select-names-bonobo.[ch]: Port to
GObject/gnome2.
* gui/component/select-names/Makefile.am: typical port stuff. add
marshaller generation foo, dist it, and switch the .oaf to .server
* gui/component/select-names/.cvsignore: ignore the marshaller
stuff.
2002-11-05 Chris Toshok <toshok@ximian.com>
* backend/ebook/.cvsignore: ignore the generated marshaller files.
* backend/ebook/e-destination.c (e_destination_dispose): rename
e_destination_destroy.
(e_destination_equal): ifdef this out for now, PENDING_PORT_WORK.
(e_destination_get_name): same.
(e_destination_get_email): same.
(e_destination_get_address): same.
(e_destination_get_textrep): same.
* backend/ebook/Makefile.am: don't build the executables
(importers and loaders) for now. Also, s/oaf/server, and use
INTLTOOL_SERVER_RULE.
* backend/ebook/e-book-util.c (e_book_get_config_database):
un-#ifdef this.
(e_book_default_book_open): un-#ifdef ths code in here that relies
on the e_config_listener.
2002-11-05 Dan Winship <danw@ximian.com>
* backend/pas/pas-backend-ldap.c (send_pending_adds): copy a
memleak fix from pas-backend-ad.
2002-11-05 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-card.c: g_date_* => g_date_get_*, fixes
G_DISABLE_DEPRECATED build.
* backend/ebook/e-book-listener.[ch]: remove the servant crap i'd
c&p'ed and put in here.
* backend/ebook/e-book-view-listener.[ch]: remove the servant crap
i'd c&p'ed and put in here.
* backend/pas/pas-book-factory.[ch]: subclass from BonoboObject,
and remove the servant crap from here too. whee.
* backend/pas/pas-card-cursor.[ch]: remove the servant crap i'd
c&p'ed and put in here.
* backend/pas/pas-book.[ch]: remove the servant crap i'd c&p'ed
and put in here.
* backend/pas/pas-book-view.[ch]: remove the servant crap i'd
c&p'ed and put in here.
2002-11-05 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-card-sexp.[ch]: port to gnome 2.
* backend/pas/pas-backend-file.[ch]: same.
* backend/pas/pas-backend-file.[ch]: same.
* backend/pas/pas-backend-ldap.[ch]: same.
* backend/pas/pas-backend-summary.[ch]: same.
* backend/pas/pas-backend.[ch]: same.
* backend/pas/pas-book-factory.[ch]: same.
* backend/pas/pas-book-view.[ch]: same.
* backend/pas/pas-book.[ch]: same.
* backend/pas/pas-card-cursor.[ch]: same.
* backend/pas/pas-marshal.list: list of marshallers.
* backend/pas/Makefile.am (libpas_a_SOURCES): add pas-marshal.c
also add the marshal building foo.
* backend/pas/.cvsignore: ignore pas-marshal.[ch]
2002-11-05 Chris Toshok <toshok@ximian.com>
* backend/ebook/test-client-list.c (main): don't call
bonobo_activation_init directly.
* backend/ebook/test-client.c (get_card_cb): don't unref the card
here since we never reffed it.
(main): no need to call bonobo_activation_init, as
gnome_program_init did it for us.
* backend/ebook/e-card-simple.c (e_card_simple_get_property):
s/g_value_{set,get}_pointer/g_value_{set,get}_object
* backend/ebook/e-book-util.c (set_default_book_uri_local): make
sure to terminate args with NULL for g_build_filename.
* backend/ebook/e-book-listener.c: nuke e_book_listener_get_type
and use the BONOBO_TYPE_FUNC_FULL macro.
* backend/ebook/e-book-listener.h: add the epv to
EBookListenerClass so BONOBO_TYPE_FUNC_FULL works.
* backend/ebook/e-book-view-listener.c: nuke
e_book_view_listener_get_type and use the BONOBO_TYPE_FUNC_FULL
macro.
* backend/ebook/e-book-view-listener.h: add the epv to
EBookViewListenerClass so BONOBO_TYPE_FUNC_FULL works.
2002-11-02 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book-types.h: just include glib.h instead of the
gtk stuff.
* backend/ebook/e-book-listener.[ch]: convert to
GObject/bonobo-activation/etc/etc.
* e-book-util.[ch]: same.
* e-book-view-listener.[ch]: same.
* e-book-view.[ch]: same.
* e-book.[ch]: same.
* e-card-compare.[ch]: same.
* e-card-cursor.[ch]: same.
* e-card-simple.[ch]: same.
* e-card.[ch]: same.
* e-destination.[ch]: same.
* evolution-ldif-importer.c: same.
* evolution-vcard-importer.c: same.
* load-gnomecard-addressbook.c: same.
* load-pine-addressbok.c: same.
* test-card.c: same.
* test-client-list.c: same.
* test-client.c: same.
* backend/ebook/Makefile.am: add e-book-marshal.c to SOURCES, add
e-book-marshal.[ch] to CLEANFILES, and add e-book-marshal.list to
EXTRA_DIST. Also, remove the camel libs from the test LDADD's,
and leave e-destination.[ch] out of the build.
* backend/ebook/.cvsignore: ignore e-book-marshal.[ch]
* backend/ebook/e-book-marshal.list: marshallers for e-book.
2002-10-28 Larry Ewing <lewing@ximian.com>
* backend/ebook/e-card.c (addPropValueUTF8): never set the charset
on an item without also encoding it. Mime messages don't like
parts with multiple charsets.
2002-10-25 Dan Winship <danw@ximian.com>
* gui/widgets/e-addressbook-model.c (addressbook_destroy):
Disconnect from the book's backend_died signal.
2002-10-24 Chris Toshok <toshok@ximian.com>
* backend/pas/Makefile.am: install evolutionperson.schema to
$(datadir)/evolution.
2002-10-24 Chris Toshok <toshok@ximian.com>
[ fixes #29144 ]
* gui/component/addressbook-config.c (edit_dialog_store_change):
use e_table_memory_storage_change instead of remove/insert, so the
selection is maintained.
2002-10-22 Dan Winship <danw@ximian.com>
* gui/component/select-names/e-select-names.c
(folder_selected): Set /Addressbook/select_names_uri in the
configdb to the selected folder.
(e_select_names_init): Look for /Addressbook/select_names_uri
before /DefaultFolders/contacts_uri for the initial folder. So the
select names dialog now starts up using the same folder you used
last time, which is useful when you have an LDAP company directory
(which can't be your default contacts folder because it's
read-only).
2002-10-21 Dan Winship <danw@ximian.com>
* gui/component/addressbook-component.c (IS_CONTACT_TYPE): fix the
sense of a strcmp
2002-10-20 Chris Toshok <toshok@ximian.com>
[ fix for #23764 ]
* gui/widgets/e-addressbook-view.c (jump_to_letters): handle
multiple letters associated with a single button.
(button_toggled): closure->letter -> closure->letters.
(free_closure): free closure->letters.
(create_alphabet): init closure->letters.
2002-10-20 Chris Toshok <toshok@ximian.com>
[ fixes #29067 ]
* backend/pas/pas-backend-file.c (pas_backend_file_search): we
need to create a card_sexp even when doing summary queries since
it's used to check modifications of cards in the view.
2002-10-20 Chris Toshok <toshok@ximian.com>
[ fixes #32144 ]
* gui/contact-editor/e-contact-save-as.c (e_contact_save_as):
convert the name to the gtk locale before saving.
(e_contact_list_save_as): same.
2002-10-19 Chris Toshok <toshok@ximian.com>
[ probable fix for #25477, and memory leak fix ]
* gui/contact-editor/e-contact-editor.c (supported_fields_cb): if
the dialog isn't in the list of all dialogs it's been destroyed so
just return here.
* backend/ebook/e-book.c
(e_book_do_response_get_supported_fields): plug leak of
resp->fields.
2002-10-15 Dan Winship <danw@ximian.com>
* backend/ebook/e-card.c (e_card_email_match_string): Return right
away rather than crashing if card->email is NULL.
(e_card_email_find_number): Likewise.
2002-10-10 Kjartan Maraas <kmaraas@gnome.org>
[ Fix #7094, #7064, #7095, #31944, #31945 ]
* gui/component/Makefile.am: Hook up new etspec file.
* gui/component/addressbook-config.c: Remove ETable spec.
* gui/component/addressbook-config.etspec: New file.
* gui/component/ldap-config.glade: Fix typo.
* gui/component/select-names/e-select-names.c: Remove inline spec.
* gui/component/select-names/e-select-names.etspec: New file.
* gui/contact-list-editor/Makefile.am: Hook up etspec.
* gui/contact-list-editor/e-contact-list-editor.c: Remove inline spec.
* gui/contact-list-editor/e-contact-list-editor.etspec: New file.
* gui/widgets/Makefile.am: Hook up new spec.
* gui/widgets/e-addressbook-view.c: Remove inline spec.
* gui/widgets/e-addressbook-view.etspec: New file.
2002-10-02 Chris Toshok <toshok@ximian.com>
[ Fix #28392 ]
* gui/widgets/e-addressbook-view.c (do_popup_menu): #if 0 out the
gal_view submenu, since it's not spec'ed to be there anyway (as
per bug #16250).
2002-09-30 Chris Toshok <toshok@ximian.com>
[ Fixes #31321 ]
* backend/ebook/e-card.c (e_card_get_vobject): add VERSION:2.1 to
exported vCards.
2002-09-30 Chris Toshok <toshok@ximian.com>
[ Fixes #31434 ]
* backend/pas/pas-backend-file.c (do_summary_query): always
retrieve the card from the db. use the summary strictly for
matching, not for storing all information. This fixes completion
of contact lists, since only 3 addresses were being stored and
contact lists can have more.
2002-09-30 Aaron Weber <aaron@ximian.com>
* gui/widgets/e-addressbook-util.c (e_addressbook_show_multiple_cards): rephrase string on l. 213
2002-09-30 Dan Winship <danw@ximian.com>
* backend/ebook/e-card.c (e_card_list_send): update for
Composer_setHeaders change.
2002-09-27 Chris Toshok <toshok@ximian.com>
[ fixes #27521 ]
* gui/contact-editor/e-contact-quick-add.c (editor_closed_cb):
always unref the contact editor when we get the editor_closed
signal.
2002-09-27 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (check_schema_support): set the
timeout to 30 seconds.
(query_ldap_root_dse): same, and also return the ldap_error since
this function is the one that actually causes openldap to
connect() to the ldap host.
(pas_backend_ldap_connect): check the return value of
query_ldap_root_dse, and error out if it's not SUCCESS.
2002-09-26 Dan Winship <danw@ximian.com>
* gui/component/addressbook-storage.c (load_source_data): Change
folder type to "contacts/ldap".
(addressbook_storage_add_source): Likewise.
(create_ldap_folder): Check for type being "contacts" not
ldap contacts, since the ldap-specific type doesn't appear in the
menu.
2002-09-25 Dan Winship <danw@ximian.com>
* gui/component/addressbook-component.c (folder_types): Rename
"ldap-contacts" to "contacts/ldap" and add "contacts/public".
(IS_CONTACT_TYPE): update for new types.
* gui/component/select-names/e-select-names.c
(e_select_names_init): Use "contacts/*" for selector_types.
* gui/widgets/e-addressbook-util.c (e_addressbook_transfer_cards):
Likewise.
* gui/component/GNOME_Evolution_Addressbook.oaf.in: add
"evolution:config_item:type" = "contacts/ldap" to the LDAP sources
control so it comes up by default when you open Preferences in an
LDAP folder.
2002-09-23 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-table-adapter.c (addressbook_destroy):
free adapter->priv.
* gui/widgets/e-addressbook-model.c (addressbook_destroy): free
model->query.
* gui/component/select-names/e-select-names-manager.c
(load_completion_books): use e_book_expand_uri here, and free the
expanded uri after calling addressbook_load_uri, plugging a leak.
* gui/component/select-names/e-select-names.c (set_book): unref
esn->model before we unref esn. fixes an edge case memory
corruption bug.
(clear_widget): utility function to set a widget's ref to NULL
when it's destroyed.
(e_select_names_init): hook the status_message, categories option
menu, and select_entry to clear_widget.
(addressbook_model_set_uri): use e_book_expand_uri.
2002-09-23 JP Rosevear <jpr@ximian.com>
* conduit/Makefile.am: add libeutil to the link and link with
libcamel instead of libcamel-static.la
2002-09-22 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names-manager.h: oops, add
cached_folder_list to struct _ESelectNamesManager.
2002-09-22 Chris Toshok <toshok@ximian.com>
[ Fixes #30481 ]
* gui/component/select-names/e-select-names.c
(e_select_names_init): initialize the select names dialog with the
default contacts folder.
2002-09-22 Chris Toshok <toshok@ximian.com>
[ Fixes #28165, 29171 ]
* gui/component/select-names/e-select-names-manager.c
(uris_listener): check to see if the value has really changed.
the way the preferences dialog works is such that we'll get called
when any of the Folder Options are changed (default folders,
offline stuff, etc.) we really only want to tear down and build
back up the completion books if the autocomplete folder setting
changed.
(read_completion_books_from_db): cache the folder list, and call
load_completion_books.
(load_completion_books): new function, loads from the
cached_folder_list.
(e_select_names_manager_init): init cached_folder_list to NULL.
(e_select_names_manager_destroy): g_free (cached_folder_list).
2002-09-20 Chris Toshok <toshok@ximian.com>
[ Fixes #30483 ]
* gui/component/select-names/e-select-names-completion.c
(name_style_query): argh, contains => beginswith.
2002-09-17 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-component.c (add_creatable_item):
don't add the user creatable item for ldap-contact folders atm,
since it results in their being duplicate New Contact and New
Contact List menu items.
2002-09-17 Kjartan Maraas <kmaraas@gnome.org>
* gui/component/ldap-config.glade: Fix a typo.
2002-09-13 Chris Toshok <toshok@ximian.com>
[ Fixes bug #30250 ]
* backend/ebook/e-destination.c (e_destination_get_name): handle
"Unnamed Lists" here by setting their name to _("Unnamed List').
* backend/ebook/e-card-simple.c (e_card_simple_get): same.
* gui/contact-list-editor/e-contact-list-editor.c (is_named): new
function, return TRUE if the name field is filled in.
(prompt_to_save_changes): return TRUE if the list isn't named
(meaning it's not saveable.)
(command_state_changed): saving requires a name.
(add_email_cb): always call command_state_changed.
(remove_entry_cb): same.
(list_name_changed_cb): same.
(visible_addrs_toggled_cb): same.
(table_drag_data_received_cb): same.
2002-09-12 Dan Winship <danw@ximian.com>
* backend/ebook/e-card-simple.c (e_card_simple_get): return
g_strdup("true"), not "true".
2002-09-11 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_start_query): institute an arbitrary
minimum limit on the number of characters before we actually try
to autocomplete. It's 3, btw.
2002-09-11 Chris Toshok <toshok@ximian.com>
[ fixes the other half of #17336 ]
* gui/contact-editor/e-contact-quick-add.c (quick_add_set_name):
parse the name when we're asked to set it, so the full name
doesn't get stored as (potentially) "Last, First" in the card.
2002-09-11 Chris Toshok <toshok@ximian.com>
[ fixes part of #17336 ]
* gui/contact-editor/e-contact-editor-fullname.c
(e_contact_editor_fullname_init): get the window title from the
.glade file, and supply a suitable wm icon.
* gui/contact-editor/e-contact-editor-address.c
(e_contact_editor_address_init): same.
2002-09-11 Chris Toshok <toshok@ximian.com>
[ fixes #30208 ]
* gui/component/addressbook.c (load_uri_auth_cb): if the user
clicked cancel in the password dialog, let them off the hook and
bind anonymously. Otherwise (if they failed to auth), prompt them
for the password again.
(addressbook_authenticate): new function, split out 99% of the
auth machinery here so it can be called multiple times. Also,
call the callback with E_BOOK_STATUS_CANCELLED if the user clicked
the cancel button in the dialog.
(load_uri_cb): call addressbook_authenticate if the book has auth
enabled.
(addressbook_load_uri): use g_new0.
2002-09-05 Anna Dirks <anna@ximian.com>
* gui/component/GNOME_Evolution_Addressbook.oaf.in : Changed the
description of the Directory Servers page of the settings dialog
to be a little less wordy {This page can be used to configure blah-->
Configure blah.}
2002-09-04 Chris Toshok <toshok@ximian.com>
[ Fixes #29904 ]
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_activate_obj): we need to activate
either a contact list editor or contact editor depending on if
it's a list (this screams for a utility function.)
2002-09-04 Dan Winship <danw@ximian.com>
* gui/component/addressbook-storage.c
(addressbook_get_other_contact_storage): Pass FALSE to
evolution_storage_new: the Other Contacts storage doesn't support
shared folders.
2002-09-04 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (create_component): Pass
NULL as @unpopulate_folder_context_menu_fn to
evolution_shell_component_new().
2002-09-03 Mike Kestner <mkestner@ximian.com>
* gui/component/select-names/e-select-names.c (e_select_names_destroy):
unref the "without", adapter, and model, then chain up the GnomeDialog
destroy function.
2002-09-03 Ettore Perazzoli <ettore@ximian.com>
* gui/component/GNOME_Evolution_Addressbook.oaf.in: Use
ldap-settings.png instead of evolution-contacts.png.
2002-09-03 Chris Toshok <toshok@ximian.com>
[ fixes #29699 ]
* gui/component/addressbook-config.c
(addressbook_add_server_druid): call _set_source with a NULL
source to fill in dialog settings that are set from the option
menus (like the SSL setting).
2002-09-03 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c (delete_contact_cb): Fix typo
[`view>view' instead of `view->view']. Also, cast to
GTK_WINDOW instead of GTK_WIDGET as it should be.
2002-08-30 Dan Winship <danw@ximian.com>
* backend/idl/addressbook.idl (CallStatus): add QueryRefused, for
when the backend refuses to perform a query. (part of #25782)
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_convert_status): translate
GNOME_Evolution_Addressbook_BookViewListener_QueryRefused.
* gui/component/addressbook.c (search_result): Handle
E_BOOK_VIEW_STATUS_QUERY_REFUSED.
2002-08-30 Chris Toshok <toshok@ximian.com>
[ fixes #27923]
* backend/pas/pas-backend-summary.c: up the version to 4_0 (4000).
(pas_backend_summary_load_item): handle wants_html{_set}, list,
and list_show_addresses.
(pas_backend_summary_save_item): same.
(pas_backend_summary_add_card): same.
(pas_backend_summary_get_summary_vcard): same.
2002-08-29 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-component.c (add_creatable_item): call
evolution_shell_component_add_user_creatable_item twice here, once
for the "contacts" folder type, and once for "ldap-contacts".
2002-08-29 Chris Toshok <toshok@ximian.com>
[ fixes #20347 ]
* gui/widgets/e-addressbook-view.c (e_addressbook_view_init): hook
up the backend_died signal.
(backend_died): new function, pop up an error dialog saying the
backend died.
* gui/widgets/e-addressbook-model.c (backend_died): new function,
emit the backend_died signal.
(e_addressbook_model_class_init): create the backend_died signal.
(e_addressbook_model_init): init backend_died_id
(e_addressbook_model_set_arg): disconnect the backend_died signal
from the old book and hook it up to the new book.
* gui/widgets/e-addressbook-model.h: add the backend_died signal.
* backend/ebook/e-book.c (backend_died_cb): new function, emit the
backend_died signal.
(e_book_do_response_open): create the component listener and hook
up the backend_died signal.
(e_book_destroy): disconnect the component listener and unref it.
* backend/ebook/e-book.h: add backend_died signal.
2002-08-29 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-card-sexp.c (is_helper): use strcasecmp
here, since all the other helpers use case insensitive
comparisons.
* backend/pas/pas-backend-summary.c (is_helper): same.
2002-08-29 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (category_ber): return NULL if
the list is empty.
(pas_backend_ldap_connect): always try to use ldapv3, not just
when we want to use tls.
2002-08-29 Chris Toshok <toshok@ximian.com>
[ fixes #25038 ]
* gui/contact-editor/Makefile.am (INCLUDES): need to have
EVOLUTION_ICONSDIR defined.
* gui/contact-list-editor/Makefile.am (INCLUDES): same.
* gui/contact-editor/e-contact-editor.c (e_contact_editor_init):
set the window icon to the contact mini icon.
* gui/contact-list-editor/e-contact-list-editor.c
(e_contact_list_editor_init): set the window icon to the new
contact list icon.
* gui/widgets/e-minicard.c (LIST_ICON_FILENAME): change to (the
prettier, imo) "contact-list-16.png"
2002-08-28 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_search): spew
the filter we're using for the search.
2002-08-28 Mike Kestner <mkestner@ximian.com>
* gui/component/select-names/e-select-names-completion.c : stop the
EBookViews before unreffing.
2002-08-28 Dan Winship <danw@ximian.com>
* gui/component/GNOME_Evolution_Addressbook.oaf.in: Add an
evolution:shell_component_launch_order and rename
evolution:shell_component_icon.
2002-08-28 Chris Toshok <toshok@ximian.com>
[ oops, merged the .h and .glade file back to the HEAD from the
1-0 branch, but missed the .c file. ]
* gui/component/select-names/e-select-names.c (status_message): set
the status label's text.
(e_select_names_init): get the status message widget from the
glade ui.
2002-08-28 Chris Toshok <toshok@ximian.com>
[ fixes #19286 ]
* gui/component/addressbook.c (delete_contact_cb): confirm
deletion of contacts when using the menubar or toolbar.
2002-08-28 Chris Toshok <toshok@ximian.com>
[ fixes #28897 ]
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_clear_book_data): set book_data to NULL
after clearing/freeing the list. fixes a crash.
2002-08-28 Chris Toshok <toshok@ximian.com>
[ fixes #20348 ]
* backend/pas/evolutionperson.schema: deprecate "categories" in
favor of "category". evolution no longer uses "categories".
* backend/pas/pas-backend-ldap.c (category_populate): new
function, "category" is the new name, and it's multivalued so we
need the complex-prop stuff..
(category_ber): new function, same.
(category_compare): new function, same.
* gui/component/addressbook.c (addressbook_search_activated): the
text is "Category is" so we should use "is" instead of "contains"
for the query.
2002-08-27 Chris Toshok <toshok@ximian.com>
[ Fixes #14835 ]
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_search):
notify_complete with InvalidQuery if the parse fails.
2002-08-27 Chris Toshok <toshok@ximian.com>
[ fixes #26907 ]
* gui/component/addressbook.c (addressbook_search_activated): use
beginswith for email.
2002-08-26 Chris Toshok <toshok@ximian.com>
* printing/e-contact-print.c (complete_sequence): change prototype
for complete_sequence to match sequence_complete.
(e_contact_print_button): same.
2002-08-26 Chris Toshok <toshok@ximian.com>
[ fixes #29446 ]
* gui/component/addressbook-config.c (scope_optionmenu_activated):
searching_modify_func can be NULL (since we don't require changes
to enable the "Next" button on this page when you create a
directory server.)
2002-08-26 Chris Toshok <toshok@ximian.com>
[ Fixes (almost certainly) #24649, #25494, #27351, and other LDAP search crashes ]
* backend/pas/pas-backend-ldap.c (view_destroy): use an EList
instead of a GList to store the book_view's so we don't have weird
issues with modifying the list while it's being traversed.
(find_book_view): same.
(create_card_handler): same.
(remove_card_handler): same.
(modify_card_modify_handler): same.
(poll_ldap): same, and also ref the book_view before calling
ldap_search_op_timeout (and therefore send_pending_adds).
(ldap_search_handler): same.
(ldap_op_add): warn about conflicting ldap msgid's (shouldn't ever
happen..)
(homephone_populate): make this a bit more robust (if values[0] ==
NULL, values[1] won't be valid).
(business_populate): same.
(build_card_from_entry): break out of the prop_info loop when we
get a match, and only set the simple field if the value != NULL.
(ldap_search_dtor): free all the pending adds stuff.
(pas_backend_ldap_process_get_book_view): g_list_prepend =>
e_list_append.
(pas_backend_ldap_remove_client): simplify the removing of the
book (use g_list_remove instead of searching and then using
g_list_remove_link.)
(pas_backend_ldap_destroy): unref the book_views list.
(pas_backend_ldap_init): initialize the EList for book_views.
2002-08-25 Mike Kestner <mkestner@ximian.com>
* gui/widgets/e-addressbook-view.c (remove_book_view): stop the
view before unref, in case the listener has pending events.
2002-08-20 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (book_open_cb): not sure what i was
thinking here... the EBook isn't valid if we couldn't open it, so
we can't turn around and query it for its capabilities.
2002-08-19 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names-manager.h: add the
listener_id slot.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_new): store off the listener_id.
(e_select_names_manager_destroy): remove the bonobo listener -
fixes a crash when modifying the completion folders after you
bring up a compose window.
(e_select_names_manager_entry_new): another random timeout change
- make the completion at 100ms.
2002-08-19 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-book-view.c (pas_book_view_notify_complete):
take and pass the CallStatus to our listener.
* backend/pas/pas-book-view.h: change the prototype for
notify_complete to include the CallStatus.
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_seq_complete_cb): add the status arg.
* gui/widgets/e-addressbook-view.c
(e_addressbook_view_class_init): init the search_result signal.
(e_addressbook_view_init): connect to the model's search_result
signal.
(emit_search_result): emit our search_result signal.
(search_result): call emit_search_result.
* gui/widgets/e-addressbook-view.h (struct
_EAddressbookViewClass): add the search_result signal.
* gui/widgets/e-addressbook-model.c (sequence_complete): emit both
a "search_result" as well as the "stop_state_changed" signal.
(e_addressbook_model_class_init): init the search_result signal.
* gui/widgets/e-addressbook-model.h: add search_result signal.
* gui/component/addressbook.c (search_result): pop up a dialog
telling the user why the search failed or was truncated.
(addressbook_factory_new_control): connect to the "search_result"
signal on the view.
* conduit/address-conduit.c (sequence_complete): add the status
parameter to sequence_complete.
* backend/idl/addressbook.idl: add BookViewListener_CallStatus,
and change notifySequenceComplete to take a CallStatus.
* backend/pas/pas-backend-ldap.c (create_card_handler): pass
status back in the notify_complete call.
(remove_card_handler): same.
(modify_card_modify_handler): same
(ldap_search_handler): same, and parse out the ldap return code so
we can report limits being properly.
* backend/pas/pas-backend-file.c (do_summary_query): pass status
back in the notify_complete call.
(pas_backend_file_search): same, and get rid of the
status_message, as the status is passed back properly.
(pas_backend_file_search): pass status
back in the notify_complete call.
(pas_backend_file_changes): same.
(pas_backend_file_process_create_card): same.
(pas_backend_file_process_remove_card): same.
(pas_backend_file_process_modify_card): same.
* backend/ebook/e-book-util.c (simple_query_sequence_complete_cb):
add status parameter.
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_queue_status_event): change name from
_queue_empty_event, and take a status arg.
(e_book_view_listener_queue_id_event): init resp->status (to
SUCCESS).
(e_book_view_listener_queue_sequence_event): same.
(e_book_view_listener_queue_message_event): same.
(impl_BookViewListener_notify_sequence_complete): call
queue_status_event, and convert the corba status to
EBookViewStatus.
(e_book_view_listener_convert_status): new function, conver the
corba status to EBookViewStatus.
* backend/ebook/e-book-view-listener.h: add a "status" slot to
EBookViewListenerResponse.
* backend/ebook/e-book-view.h: change prototype for
sequence_complete signal.
* backend/ebook/e-book-view.c (e_book_view_do_complete_event):
sequence_complete takes a parameter now (EBookViewStatus).
(e_book_view_class_init): add the enum arg to the signal.
* backend/ebook/e-book-types.h: add EBookViewStatus enum.
2002-08-19 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_get_static_capabilities): add
"cache-completions" here, since file completion results are
blanket cached (as they're generated from a summary).
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_process_get_cursor): there should be no search
limit on the get_cursor_request, as it's meant to match every card
it can.
(ldap_search_handler): parse the ldap result in the
RES_SEARCH_RESULT case. we'll want more here soon, so we can
notify the front end if the result was truncated due to either the
size or time limit being exceeded.
(pas_backend_ldap_process_get_book_view): in the case of a
completion view, we hardcode (yeah yeah, i know, but really) the
search limit to MIN (100, user-specified-limit).
(pas_backend_ldap_search): each view has its own limit now,
defaulting from the user specified one for normal searches but
possibly different for completion views. use the view's limit
here.
2002-08-19 Dan Winship <danw@ximian.com>
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): add an "addresses" property, to get the
"Dan Winship <danw@ximian.com>" form, as opposed to "text", which
gets you what's displayed, which might be just "Dan Winship".
(entry_set_property_fn): When setting, just reuse the "text" code,
since it should properly cardify everything for us anyway.
(impl_SelectNames_get_entry_for_section): Add the property.
2002-08-16 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c
(addressbook_source_dialog_set_source): fix c&p error that was
losing the ssl setting.
2002-08-16 Iain <iain@ximian.com>
* backends/e-book/evolution-ldif-importer.c (ebook_create): Use the
default EBook instead of the local one.
* backends/e-book/evolution-vcard-importer.c (ebook_create): Ditto.
2002-08-16 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (book_view_notify_status): new
function to save a little typing.
(find_book_view): same.
(pas_backend_ldap_connect): reorder things a bit - set the version
to VERSION3 *before* doing TLS, as tls requires v3, and if we're
doing ldaps://, do tls a little differently (not sure if this is
strictly necessary, but the openldap source did it.. *shrug*).
also, guard the schema check as this function can be called
multiple times for the same server (if the server goes down or
times us out.)
(pas_backend_ldap_reconnect): new function, reconnect and if
necessary reauth the user.
(pas_backend_ldap_process_create_card): use
find_book_view/book_view_notify_status/pas_backend_ldap_reconnect.
(pas_backend_ldap_process_remove_card): same.
(pas_backend_ldap_process_modify_card): same.
(pas_backend_ldap_process_get_vcard): same.
(pas_backend_ldap_process_get_cursor): same.
(pas_backend_ldap_search): same.
(poll_ldap): reconnect if ldap_result returns -1.
(pas_backend_ldap_process_authenticate_user): ick ick ick save off
the dn/passwd we auth with so we can use them to reauthenticate.
2002-08-16 Chris Toshok <toshok@ximian.com>
[ fix 27333 ]
* gui/widgets/e-addressbook-model.c (get_view): "local" ->
"do-initial-query".
* backend/pas/pas-backend-file.c
(pas_backend_file_get_static_capabilities): "local" ->
"local,do-initial-query".
* gui/widgets/e-addressbook-model.c (get_view): "local" ->
"do-initial-query".
* gui/component/addressbook.c (book_open_cb): Only assume the
addressbook is local if "local" appears in its static
capabilities. We still use the ldap special case, but be nicer to
other networked backends.
2002-08-12 Dan Winship <danw@ximian.com>
* gui/component/addressbook-component.c (user_create_new_item_cb):
If invoked from a non-contact folder, add the contact to the
default contact folder, not the local one. If invoked from a
contact folder, don't append "addressbook.db" to the URI, let
ebook do the right thing. Fixes #28327 and #28325.
* backend/idl/addressbook.idl (CallStatus): Add NoSuchBook.
(Initially intended as part of a fix for #28327, but the other
changes make it so the error code never ends up getting used any
more, but it's still good to have.)
* gui/widgets/e-addressbook-util.c (e_addressbook_error_dialog):
Handle NO_SUCH_BOOK.
* backend/ebook/e-book-types.h (EBookStatus): Add
E_BOOK_STATUS_NO_SUCH_BOOK.
* backend/ebook/e-book-listener.c
(e_book_listener_convert_status): add case for NoSuchBook.
* backend/ebook/e-book-util.c (e_book_load_local_address_book):
Kill this. Nothing should ever explicitly load the local
addressbook.
(e_book_use_default_book): Replaces e_book_use_local_address_book,
using the default book instead.
(e_book_default_book_open): Fall back to local contact folder on
E_BOOK_STATUS_NO_SUCH_BOOK too.
(e_book_query_address_default): Use default book, not local.
* gui/component/e-address-widget.c (query_idle_fn): Use the
default book, not the local book.
* gui/component/select-names/e-select-names-popup.c
(edit_contact_info_cb): Use the default book, not the local book.
* backend/ebook/e-destination.c (e_destination_cardify): Use the
default book, not the local book.
(e_destination_touch): Query the default book, not the local book.
* backend/ebook/e-card-compare.c (e_card_locate_match,
e_card_locate_match_full): Use the default book, not the local
book.
2002-08-08 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-summary.c (pas_backend_summary_init):
initialize summary->upgraded to quiet valgrind.
2002-08-06 Dan Winship <danw@ximian.com>
* backend/ebook/test-client.c (TEST_VCARD): Use "\r" rather than
including literal CRs in the string, which confuses gcc on OS X.
* backend/ebook/test-card.c (TEST_VCARD): Likewise.
2002-08-01 Chris Toshok <toshok@ximian.com>
[ fixes bug #25958 ]
* gui/component/addressbook.c (alphabet_state_changed): use
FULL_NAME in the case where we're untoggling a letter, and... well
use FULL_NAME in the other case too - we should never pop up the
advanced dialog.
2002-08-01 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names.h (struct
_ESelectNames): no more search_entry.
* gui/component/select-names/e-select-names.c (update_query): no
more search_entry, search_entry => select_entry, and add file_as
to the query since some entries don't have names (like the Ximian,
Inc. default card.)
(e_select_names_init): no more search_entry, and add an "activate"
handler on select_entry that updates the query.
2002-08-01 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names.h (struct
_ESelectNames): remove folders and folders_by_uri, and the 2
listeners.
* gui/component/select-names/e-select-names.c
(e_select_names_destroy): remove the hash_table_destroys of
folders and folders_by_uri, since they no longer exist. same for
other_contacts_listener and local_listener.
2002-08-01 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (create_component): Use
"contact-list-16.png" for the "New Contact List" item.
2002-07-31 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (create_component): Change
the order so that "New Contact" is first and "New Contact List" is
next.
2002-07-31 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (add_creatable_item): Pass
"contacts" as the @folder_type to
evolution_shell_component_add_user_creatable_item().
2002-07-31 Chris Toshok <toshok@ximian.com>
[ roll in the following change from the 1.0 branch.]
* backend/pas/pas-backend-ldap.c:
(prop_info): change the CALURI and FBURL ecard attributes to map to the
RFC 2739 specified attributes.
(check_schema_support): check to see if calEntry is supported.
(add_objectclass_mod): insert calEntry if it's supported.
* backend/pas/evolutionperson.schema: deprecate freeBusyURI
and calendarURI.
2002-07-31 Ettore Perazzoli <ettore@ximian.com>
[Patch by Jacob Berkman <jacob@ximian.com>, fixes #25968]
* backend/ebook/e-book.c (activate_factories_for_uri): Don't
double free protocol and query.
2002-07-27 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-summary.c (save_string): don't save
empty strings.
(pas_backend_summary_save): print out the errno when we fail.
2002-07-26 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c: Don't set up the ContactNew and
ContactNewList verbs.
(update_command_state): Don't set the sensitivity of
/commands/ContactNew and /commands/ContactNewList anymore.
(new_contact_cb): Removed.
(new_contact_list_cb): Removed.
2002-07-24 Peter Williams <peterw@ximian.com>
* conduit/Makefile.am (libeaddress_conduit_la_LIBADD): Change
libversit.la -> libversit.a for danw's changes.
2002-07-24 Dan Winship <danw@ximian.com>
* conduit/Makefile.am (libeaddress_conduit_la_LIBADD):
s/libversit_lt/libversit/
2002-07-22 Dan Winship <danw@ximian.com>
* backend/pas/Makefile.am: Split pas-backend-file and
pas-backend-ldap out of libpas and build them as separate (noinst)
libraries libpasfile.a and libpasldap.a. This gets the db3 and
LDAP dependencies out of libpas, and people trying to create an
addressbook backend shouldn't be calling functions from the
existing backends anyway so there's no reason to install them.
2002-07-16 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/select-names.glade: remove the option
menu and browse button, and add a custom widget placeholder for
the folder-selector.
* gui/component/select-names/e-select-names.c
(addressbook_model_set_uri): move the "append /addressbook.db"
stuff here.
(e_addressbook_create_ebook_table): remove the code setting
initial uri from here.
(e_select_names_folder_free): gone.
(e_select_names_option_activated): gone.
(add_menu_item): gone.
(update_option_menu): gone.
(new_folder): gone.
(removed_folder): gone.
(folder_browse): gone.
(hookup_listner): gone.
(add_additional_select_names_uris): gone.
(e_select_names_hookup_listners): gone.
(e_addressbook_create_folder_selector): new function, create the
folder selector button.
(folder_selected): new function, callback for the folder selector.
just calls addresbook_model_set_uri.
(e_select_names_init): get the folder selector and initialize it
to show /local/Contacts. also, set the model's uri here to the
same folder. nuke the code involving the old option menu and
browse button.
2002-07-08 Peter Williams <peterw@ximian.com>
* backend/ebook/Makefile.am: Install libebook-static.la.
Also change --all-static to -all-static, which is the right flag.
* backend/pas/Makefile.am: Install the PAS headers in
$(includedir)/evolution/pas. Install libpas.a
2002-07-08 Peter Williams <peterw@ximian.com>
* gui/component/select-names/Makefile.am (idl_DATA): Install the
SelectNames IDL and ancillary changes.
2002-07-12 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-summary.c (free_summary_item): free the
full_name (as well as given_name. oops.)
(pas_backend_summary_new): new summaries are version 3.0 now.
(pas_backend_summary_load_item): all loaded summaries should be
3.0+, as we fail to load versions lower than that.
(pas_backend_summary_load_header): if the summary isn't version
3.0 fail out, as we need to rebuild the entire file to cache the
full_name fields.
(pas_backend_summary_save_item): save out the full_name.
(pas_backend_summary_add_card): put the item's full_name in the
card.
2002-07-12 Dan Winship <danw@ximian.com>
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): Make the
ENTRY_PROPERTY_ID_SIMPLE_CARD_LIST case not crash, although
there's still something wrong.
2002-07-10 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_start_query): e_book_get_book_view =>
e_book_get_completion_view, so the backends have the option of
using a pregenerated summary.
2002-07-10 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-summary.c (clear_items): actually remove
the items from the pointer array too, so an error while loading
doesn't leave the memory summary corrupted.
(pas_backend_summary_load_header): bleah, load the num_items and
summary_mtime in the right order :) Also, set upgraded to TRUE if
we loaded a v1.0 summary.
(pas_backend_summary_open): make this return a gboolean, return
TRUE if the summary is already open (priv->fp != NULL). return
FALSE in error conditions.
(pas_backend_summary_load): if summary_open returns FALSE, return
FALSE, also set the dirty flag to FALSE after we load, and if the
summary was upgraded write it out.
(pas_backend_summary_save): update the in memory mtime to that of
the file when we save.
(summary_flush_func): if we're not dirty, do nothing and return.
(pas_backend_summary_is_up_to_date): make sure we've opened the
summary.
(pas_backend_summary_get_summary_vcard): fix compiler warning.
2002-07-10 Peter Williams <peterw@ximian.com>
* backend/ebook/e-book-view-listener.h: Oops, missed this one.
* backend/ebook/Makefile.am (libebookinclude_HEADERS): Also
put addressbook.h here because several headers reference it.
2002-07-08 Peter Williams <peterw@ximian.com>
* backend/ebook/e-book.h: Normalize includes to <ebook/foo.h>, so
that the installed headers will work sanely.
* backend/ebook/e-card-cursor.h:
* backend/ebook/e-book-view.h:
* backend/ebook/e-card-simple.h:
* backend/ebook/e-card.h:
* backend/ebook/e-destination.h: Same.
* printing/Makefile.am (INCLUDES): add -Iaddressbook/backend
to access the ebook headers. Also the builddir version to get
the generated addressbook.h
* conduit/Makefile.am (INCLUDES): Same.
* gui/widgets/Makefile.am (INCLUDES): Same builddir fix.
* gui/merging/e-card-merging.c: Fix an ebook #include.
* gui/merging/Makefile.am (INCLUDES): Same idea.
* gui/contact-list-editor/Makefile.am (INCLUDES): Same.
* gui/contact-editor/Makefile.am (INCLUDES): Same builddir
change.
2002-07-10 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-storage.c (load_source_data): Pass
zero as the @sorting_priority to evolution_storage_new_folder().
(addressbook_storage_add_source): Likewise.
2002-07-10 Chris Toshok <toshok@ximian.com>
* backend/idl/addressbook.idl: add Book.getCompletionView.
* backend/ebook/e-book.c (e_book_get_completion_view): new
function, basically c&p of e_book_get_book_view, but call
getCompletionView.
* backend/ebook/e-book.h: add prototype for
e_book_get_completion_view.
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_process_client_requests): add a
GetCompletionView case here that just calls the same code as
GetBookView (since we don't build summaries for the ldap backend.)
* backend/pas/pas-backend-file.c (do_summary_query): add
@completion_search. If it's TRUE, just create the vcards from the
summary using pas_backend_summary_get_summary_vcard instead of
looking them up from the db.
(pas_backend_file_search): add @completion_search and pass it on
to do_summary_query.
(pas_backend_file_process_get_book_view): pass FALSE to
pas_backend_file_search.
(pas_backend_file_process_get_completion_view): new function,
basically c&p pas_backend_file_process_get_book_view, but pass
TRUE to pas_backend_file_search.
(pas_backend_file_process_client_requests): add a case for
GetCompletionView.
(pas_backend_file_load_uri): track the change to the summary api -
create the summary filename
* backend/pas/pas-book.c (pas_book_queue_get_completion_view): new
function, queue a GetCompletionView request to our queue.
(impl_GNOME_Evolution_Addressbook_Book_getCompletionView): new
function, call pas_book_queue_get_completion_view.
(pas_book_respond_get_completion_view): new function, just call
notifyViewRequested.
(pas_book_free_request): add a case for GetCompletionView.
(pas_book_get_epv): fill in epv->getCompletionView.
* backend/pas/pas-book.h: add a GetCompletionView PASOperation,
and a new structure (PASGetCompletionViewRequest). Also, add
get_completion_view to PASRequest.
* backend/pas/pas-backend-summary.c (clear_items): remove the
items from the hash table.
(pas_backend_summary_new): db_path -> summary_path.
(pas_backend_summary_destroy): db_.path -> summary_path, and
destroy the hash table.
(pas_backend_summary_init): db_path = summary_path, and initialize
the id_to_item hashtable.
(pas_backend_summary_load_header): handle the upgrading from
version 1.0 to version 2.0 (the addition of an mtime field in the
header)
(pas_backend_summary_load_item): version 1.0 and 2.0 have the same
format for items.
(pas_backend_summary_open): new function. open the summary so we
can load the header (and get the mtime).
(pas_backend_summary_load): rework this a bit since the header has
already been loaded, and also add the items to the hashtable.
(pas_backend_summary_add_card): add the new item to the hashtable.
(pas_backend_summary_remove_card): remove the item from the hash
table.
(pas_backend_summary_is_up_to_date): new function, chekc @t
against the summary's mtime.
(pas_backend_summary_get_summary_vcard): create a vcard from the
fields we have in the summary.
* backend/pas/pas-backend-summary.h: add prorotypes for
pas_backend_summary_is_up_to_date and
pas_backend_summary_get_summary_vcard.
2002-07-09 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-storage.c (load_source_data): Pass
NULL @custom_icon_name to evolution_storage_new_folder().
(addressbook_storage_add_source): Likewise. [Note we could be
passing a nice custom here. ;-)]
2002-07-02 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (add_creatable_item): New
arg @tooltip; pass it to
evolution_shell_component_add_user_creatable_item() [which now has
a @tooltip arg].
2002-06-29 Chris Toshok <toshok@ximian.com>
* backend/pas/Makefile.am (libpas_a_SOURCES): add
pas-backend-summary.[ch].
* backend/pas/pas-backend-file.c (string_to_dbt): move this to the
top of the file so it can be used in..
(build_summary): loop over the db, adding cards ot the summary.
(do_summary_query): call pas_backend_summary_search and loop over
the returned id's looking them up in the db.
(pas_backend_file_search): call
pas_backend_summary_is_summary_query, and either call
do_summary_query if it's a query over just the set of attributes
in the summary or use the old, slow method if not.
(pas_backend_file_process_create_card): call
pas_backend_summary_add_card.
(pas_backend_file_process_remove_card): call
pas_backend_summary_remove_card.
(pas_backend_file_process_modify_card): call remove_card/add_card.
(pas_backend_file_load_uri): try to load the summary file, and if
it doesn't exist create it.
(pas_backend_file_destroy): unref the summary.
* backend/pas/pas-backend-summary.[ch]: new files, reading and
writing (and querying) summaries.
2002-06-27 Sean Atkinson <sean@cantab.net>
* gui/component/addressbook-config.c (query_for_supported_bases):
don't unref selection_model (otherwise 3 clicks of
"Show Supported Bases" crashes if LDAP server isn't running).
2002-06-25 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-component.c (create_component):
reorder the adding of creatable items so the default is a new
contact, not a new contact list.
2002-06-21 Sean Atkinson <sean@cantab.net>
* gui/component/addressbook-config.c (addressbook_edit_server_dialog):
remove source argument (get it from the dialog).
(edit_source_clicked): same.
(sources_table_double_click): added to edit server by double-clicking.
(ldap_dialog_new): use sources_table_double_click.
2002-06-17 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-view.c (e_addressbook_view_save_as):
pass NULL to e_contact_list_save_as. modality sucks. fixes
broken build.
(save_as): same.
2002-06-15 Chris Toshok <toshok@ximian.com>
[ fixes bug #26130 ]
* gui/contact-editor/e-contact-editor.c (file_save_as_cb): pass
ce->app as parent_window.
* gui/contact-list-editor/e-contact-list-editor.c
(file_save_as_cb): same .
* gui/contact-editor/e-contact-save-as.c (e_contact_list_save_as):
if a parent_window is specified, the file selector should be
modal/transient for that window.
(e_contact_save_as): same.
* gui/contact-editor/e-contact-save-as.h: track prototype changes
(addition of GtkWindow *parent_window to both calls.)
2002-06-15 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_connect): use
ldap_unbind_ext.
(create_card_handler): don't leak the new vcard.
(pas_backend_ldap_process_authenticate_user): don't leak the dn.
2002-06-14 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c (pas_backend_file_search): up the
max threshold to 3000 cards from 1000 cards.. seems to improve
performance a bit. also remove the g_list_reverse since it
doesn't matter what order the cards arrive to the gui.
(pas_backend_file_changes): plug memory leaks.
2002-06-14 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-compare.c (compare_email_addresses): Made
"" compare as not equal to "" for addresses.
(use_common_book_cb): Don't bother checking for nickname here
since we don't use it as a match later. Don't add "" as an
address to the list of query parts.
2002-06-13 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/e-contact-editor.c (enable_writable_fields):
Don't enable fields if the editor isn't editable and the
widget_field_mappings lists this field as being desensitize for
read only.
2002-06-11 Chris Toshok <toshok@ximian.com>
[ fixes bug #17332 ]
* backend/ebook/e-book.c (e_book_get_static_capabilities): we
shouldn't ever return NULL here. in error cases we need to return
g_strdup("");
2002-06-11 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-minicard-view.c (e_minicard_view_event): Made
double clicking on read only folders not do anything.
2002-06-10 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book-util.c (e_book_expand_uri): Made expand_uri
a bit more robust and readable.
(e_book_get_default_book_uri): Made e_book_get_default_book_uri
use e_book_expand_uri if using the bonobo_config value.
* gui/component/e-address-popup.c (start_query): Handle the
failure state here by acting as if there are no matches.
2002-06-05 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-minicard.c (e_minicard_event): Call
e_minicard_selected in the GDK_BUTTON_RELEASE case here.
(e_minicard_drag_begin): Set E_REFLOW (parent)->maybe_in_drag =
FALSE if it's an EReflow.
2002-06-04 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_book_ready): Commented out this unused
function.
* gui/component/select-names/e-select-names-manager.c
(open_book_cb): Ref if we're keeping the book. Don't unref if
we're not keeping the book.
(clean_cb): Commented out this unused function.
2002-06-04 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c (init_collection): Set the
title of our GalVIewCollection.
2002-05-29 Anna Marie Dirks <anna@ximian.com>
* gui/component/select-names/select-names.glade: Changed some spacing
and expanding behavior to make this dialog behave more like I intended
to.
2002-05-24 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c (CONFIG_CONTROL_FACTORY_ID):
put this back in, accidentally got snipped with the hacking going
on in here.
2002-05-24 Chris Toshok <toshok@ximian.com>
[ part of #25047 ]
* gui/component/addressbook-config.c: remove the autocompletion
config control from here, as it lives in the shell now.
* gui/component/GNOME_Evolution_Addressbook.oaf.in: same.
2002-05-24 Chris Toshok <toshok@ximian.com>
[ #24189 ]
* gui/component/select-names/e-select-names-manager.c
(focus_out_cb): ifdef out the body of this because it only works
with a single completion book. not sure what to do here, but it
doesn't impact most usage scenarios.
(completion_popup_cb): same.
(e_select_names_manager_entry_new): add the books that have been
loaded successfully by the time this entry is created.
(open_book_cb): add the opened book to the entries that have
already been created, and store it in our list so that entries
that are created in the future can catch up.
(read_completion_books_from_db): slurp in the folder list from the
config db and load all the uris.
(uris_listener): listener function - when there's a change it
calls _clear_books on all the created entries, and clears our
list. It then re-reads the books from the db.
(e_select_names_manager_new): create our bonobo listener and call
read_completion_books_from_db.
(e_select_names_manager_init): init completion_books.
(e_select_names_manager_destroy): free our list of
completion_books.
* gui/component/select-names/e-select-names-manager.h: switch from
a single EBook to a GList of completion_books here.
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_add_book): deal with the case where
there's an active query (by effectively restarting it.) This is
quite a contrived edge case.
(e_select_names_completion_clear_books): stop the current query
and clear our list of books.
(e_select_names_completion_new): track change to prototype, and
axe the majority of this method since an EBook* isn't passed
anymore.
(e_select_names_completion_clear_book_data): split this code out
from the destroy method so it can be called from _clear_books.
* gui/component/select-names/e-select-names-completion.h: the
constructor no longer takes an EBook -- pass in as many as you
want using _add_book. Also, add prototype for _clear_books.
* gui/component/addressbook.c (load_uri_cb): when
storing/retrieving passwords, use the cleaned (without params)
version of the uri, so changing things like download limit don't
cause the user to be prompted for a password again.
* gui/component/addressbook-component.c
(ensure_completion_uris_exist): new function - probably doesn't
belong in this file. Make sure the basic local Contacts folder
exists in the completion uris.
(addressbook_component_factory_init): call
ensure_completion_uris_exist.
* backend/ebook/e-book-util.h: add prototype for
e_book_get_default_book_uri.
* backend/ebook/e-book-util.c (e_book_get_default_book_uri): new
function, just return the default contacts uri.
(e_book_load_default_book): change
to use e_book_get_default_book_uri.
2002-05-23 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c (addressbook_root_dse_query):
fix parameter/local variable overloading.
2002-05-21 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c (load_uri_cb): Don't try to invoke
e_book_get_uri() on NULL. Fixes #25069.
2002-05-17 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-util.c (e_addressbook_error_dialog):
make sure we map status -> string correctly (add missing strings).
* backend/ebook/e-book-types.h (EBookStatus): add the missing
AUTHENTICATION_REQUIRED status code, to map to the idl response.
* backend/ebook/e-book-listener.c
(e_book_listener_convert_status): make sure we map all idl status
codes to EBookStatus statuses.
2002-05-20 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-storage.c (load_source_data): Pass
FALSE for @sync_offline to evolution_storage_new_folder().
(addressbook_storage_add_source): Pass FALSE for @sync_offline to
evolution_storage_new_folder().
2002-05-16 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (request_quit): New, quit
handler for the EvolutionShellComponent.
(add_creatable_item): Set it up.
* gui/contact-editor/e-contact-list-editor.c
(e_contact_list_editor_request_close_all): New.
(e_contact_list_editor_new): Put the contact editor in a static
list and gtk_object_weakref() it.
(contact_list_editor_destroy_notify): New, GtkDestroyNotify
function for the contact editors.
* gui/contact-editor/e-contact-editor.c
(e_contact_editor_request_close_all): New.
(e_contact_editor_new): Put the contact editor in a static list
and gtk_object_weakref() it.
(contact_editor_destroy_notify): New, GtkDestroyNotify function
for the contact editors.
2002-05-15 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (create_component): Pass
NULL as @request_quit_fn.
2002-05-13 Christopher James Lahey <clahey@ximian.com>
* backend/idl/addressbook.idl: Removed an incorrect comment here.
2002-05-13 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/e-contact-editor.c (enable_writable_fields):
Enable the dropdown widgets even if the contact is not editable so
that you can view any email address, phone number, or postal
address on read only contacts.
2002-05-10 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/Evolution-Addressbook-SelectNames.idl:
Added SimpleCard interface.
* gui/component/select-names/Makefile.am: Added
e-simple-card-bonobo.c and e-simple-card-bonobo.h.
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): Added SIMPLE_CARD_LIST arg.
* gui/component/select-names/e-simple-card-bonobo.c,
gui/component/select-names/e-simple-card-bonobo.h: New class to
represent an ECardSimple across Bonobo.
2002-05-09 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): Added "first_email" property.
2002-05-09 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-storage.c
(addressbook_get_other_contact_storage): Pass %FALSE as
@has_shared_folders to evolution_storage_new().
2002-05-08 JP Rosevear <jpr@ximian.com>
* conduit/Makefile.am: link against the libtool version of
libversit
2002-05-07 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c
(addressbook_config_control_new): oops, add the NULL back at the
end of possible_types.
2002-05-07 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c (addressbook_ldap_init):
bleah, need to pass the GtkWindow here so we can pop up the a
modal parented dialog (gtk modal dialogs suck?).
(addressbook_ldap_auth): same.
(addressbook_root_dse_query): same.
(do_ldap_root_dse_query): same.
(addressbook_config_control_new): add "ldap-contacts" to the list
of possible types.
2002-05-07 Dan Winship <danw@ximian.com>
* gui/component/addressbook-storage.c (create_ldap_folder):
s/ldap_config/addressbook_config/
2002-05-03 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book.c (activate_factories_for_uri): finally
remove the #if 0's and use the oaf query stuff to get backends
that handle specific protocols.
2002-05-03 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook-config.c
(addressbook_folder_list_changed_callback): Call
evolution_config_control_changed when the EFolderList changes.
2002-05-03 Christopher James Lahey <clahey@ximian.com>
* gui/component/GNOME_Evolution_Addressbook.oaf.in: Updated this
to have the ConfigControlFactory have an addressbookwide generic
name and added OAFIID:GNOME_Evolution_Addressbook_ConfigControl.
* gui/component/Makefile.am (evolution_addressbook_SOURCES),
gui/component/addressbook-component.c,
gui/component/addressbook-storage.c, gui/component/addressbook.c:
Replaced ldap-config.c and ldap-config.h with addressbook-config.c
andaddressbook-config.h.
* gui/component/addressbook-config.c,
gui/component/addressbook-config.h: Based on ldap-config.c and
ldap-config.h. Added a folder list control. Made this a multi
factory.
* gui/component/ldap-config.c, gui/component/ldap-config.h:
Replaced these with addressbook-config.c and addressbook-config.h.
2002-05-02 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c (selection_change):
Desensitize the to, cc, and bcc buttons if there's no selection
here. Fixes Ximian bug #21482.
2002-05-01 Christopher James Lahey <clahey@ximian.com>
* gui/contact-list-editor/e-contact-list-editor.c (verbs): Changed
some of these to bind to the ContactListEditor verbs since they're
marked as that in the ui file. Fixes Ximian bug #13034.
2002-04-30 JP Rosevear <jpr@ximian.com>
* gui/component/Makefile.am (EXTRA_DIST): fix
2002-04-30 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-model.c,
gui/widgets/e-addressbook-model.h
(e_addressbook_model_peek_card): Added this function so that there
would be less duplication of cards during run time when
duplication is unnecessary.
* gui/widgets/e-addressbook-view.c: Cleaned up get_card_list and a
number of associated functions to be much more uniform and
simpler.
(get_has_email_address): Don't show the "Send Message to Contact"
menu item if there are no email addresses in the listed contacts.
Fixes bug #1298.
2002-04-30 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card.c (e_card_list_send): Changed this to set a
subject when sending a contact. This makes the signature be set
properly also.
2002-04-26 Jeffrey Stedfast <fejj@ximian.com>
* printing/Makefile.am: Don't link to libibex anymore.
* conduit/Makefile.am: Same.
* backend/ebook/Makefile.am: Again here.
* gui/component/Makefile.am: And finally here.
2002-04-26 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_child_free): Unref the text_model here instead of
the model, since the model never gets set. Removed the model
field since it's no longer used.
2002-04-24 Christopher James Lahey <clahey@ximian.com>
* gui/component/ldap-config.c: Updated this for the new
e_table_memory_store_insert function prototype.
2002-04-24 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c,
gui/component/select-names/e-select-names.h,
gui/component/select-names/select-names.glade (folder_browse):
Added a "Browse..." button to switch to a different addressbook
folder.
* gui/widgets/e-addressbook-util.c (e_addressbook_transfer_cards):
Moved extern EvolutionShellClient out of this function so that
it'd be more readable.
2002-04-23 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c,
gui/component/select-names/e-select-names.h: Coded handling of the
select_entry to search within the displayed contacts.
* gui/component/select-names/select-names.glade: Updated this
dialog to have an entry-select instead of an entry-find.
2002-04-23 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/select-names.glade: Updated this
dialog to match the redesign.
2002-04-23 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c (do_popup_menu): Make unused
menu items disappear instead of graying out.
2002-04-23 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c,
gui/widgets/e-addressbook-reflow-adapter.h: Removed
e_addressbook_reflow_adapter_right_click and
e_addressbook_reflow_adapter_base_right_click.
* gui/widgets/e-addressbook-view.c: Handle right click menu for
both types of view. Merged right click on white space with right
click on main area. General clean up.
* gui/widgets/e-minicard-view-widget.c,
gui/widgets/e-minicard-view-widget.h: Removed a couple unnecessary
functions. Added e_minicard_view_widget_get_view. Added
right_click signal.
* gui/widgets/e-minicard-view.c, gui/widgets/e-minicard-view.h:
Added the right_click signal and the e_minicard_view_get_card_list
function.
2002-04-22 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.h: Removed an unused
variable here.
* gui/widgets/e-addressbook-view.c (table_right_click,
table_white_space_event): Added a current view submenu to the
popup menu here.
2002-04-22 Jeffrey Stedfast <fejj@ximian.com>
* gui/widgets/e-minicard-view.c (e_minicard_view_drag_begin):
Allow GDK_ACTION_COPY also, since the composer for example does
not accept MOVE's. Completes bug #8448.
2002-04-18 Chris Toshok <toshok@ximian.com>
* gui/component/ldap-config.glade: change order of scope option
menu to match how it's stored.
2002-04-18 Chris Toshok <toshok@ximian.com>
* gui/component/GNOME_Evolution_Addressbook.oaf.in: change ldap
config control text so it fits in the config dialog.
* gui/component/ldap-config.c: #ifdef lots of stuff HAVE_LDAP so
it'll build/run in either case.
(addressbook_source_dialog_destroy): rename
addressbook_add_server_druid_destroy to this, and free lots more
stuff.
(addressbook_add_server_druid):
addressbook_add_server_druid_destroy ->
addressbook_source_dialog_destroy.
(do_schema_query): add 3 second timeout to schema query.
(addressbook_edit_server_dialog): hook up destroy signal.
(config_control_new): if HAVE_LDAP isn't defined, put up a label
saying so.
2002-04-18 Chris Toshok <toshok@ximian.com>
* gui/component/Makefile.am (INCLUDES): add LDAP_CFLAGS to INCLUDES
2002-04-18 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (book_open_cb): no more
source->type.
2002-04-18 Chris Toshok <toshok@ximian.com>
* gui/component/ldap-config.c (addressbook_dialog_get_source):
fill in source->ssl.
(addressbook_source_dialog_set_source): set up auth/scope/ssl
option menus properly.
* gui/component/addressbook-storage.c
(addressbook_storage_init_source_uri): always include the
limit/ssl in the uri so we don't need to rely on defaults
everywhere.
(ldap_source_foreach): store the ssl option.
* gui/component/addressbook-storage.h: reorder SSLType to match
the UI.
* backend/pas/pas-backend-ldap.c: (struct _PASBackendLDAPPrivate)
add field for ldap_timeout.
(pas_backend_ldap_connect): reorder things a bit - we need to
start tls before the root dse query, if we can.
(pas_backend_ldap_load_uri): track the way ssl parameters are
given in the uri, and parse out the timeout.
* gui/component/ldap-config.c (port_changed_func): use the
symbolic SSL name instead of an integer constant.
2002-04-18 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (get_ldap_library_info): fix
memory leaks.
* gui/component/GNOME_Evolution_Addressbook.oaf.in: remove the
Addressbook_ConfigControl stuff to LDAP_ConfigControl.
* gui/component/Makefile.am (evolution_addressbook_SOURCES):
remove addressbook-config.* and add ldap-config.*
(glade_DATA): same.
(evolution_addressbook_LDADD): add LDAP_LIBS.
* gui/component/addressbook-component.c (owner_set_cb):
addressbook_config_register_factory =>
ldap_config_register_factory.
* gui/component/addressbook.c (book_open_cb): remove source->type
check - they're always LDAP.
(load_uri_cb): same.
* gui/component/addressbook-storage.c (ldap_unparse_ssl): new
function.
(ldap_parse_ssl): new function.
(addressbook_storage_init_source_uri): use a more flexible scheme
to build up the uri's, and add in the ssl parameter.
(load_source_data): fill in source->ssl, and remove source->type
assignment.
(addressbook_source_copy): copy source->ssl, and remove
source->type copy.
(create_ldap_folder): addressbook_create_new_source =>
ldap_config_create_new_source.
* gui/component/addressbook-storage.h: remove
AddressbookSourceType (it was always LDAP), and add
AddressbookLDAPSSLType.
2002-04-18 Dan Winship <danw@ximian.com>
* backend/ebook/e-book-util.c (e_book_load_default_book): Append
/addressbook.db to the end of the default URI if it starts with
file:
* backend/ebook/e-book.c (e_book_load_uri_step): Fix this to not
loop forever if you have more than one backend.
2002-04-17 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_create_categories): Changed this to use
ECategoriesMasterListOptionMenu.
* gui/component/select-names/e-select-names.c
(section_right_click_cb),
gui/widgets/e-addressbook-reflow-adapter.c,
gui/widgets/e-addressbook-view.c: Updated these to match the new
EPopupMenu.
2002-04-11 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook-component.c: Include
addressbook-config.h here as this file uses it.
* gui/component/select-names/e-select-names.c (SPEC, SPEC2): Made
this dialog searchable by typing in the ETable.
* gui/widgets/e-addressbook-model.c: Include e-addressbook-util.h
here.
* gui/widgets/e-addressbook-reflow-adapter.c
(e_addressbook_reflow_adapter_right_click),
gui/widgets/e-addressbook-view.c (table_right_click): Fixed a
memory leak here by using "selection-done" signal.
* gui/widgets/e-addressbook-reflow-adapter.c,
gui/widgets/e-addressbook-reflow-adapter.h,
gui/widgets/e-addressbook-view.c, gui/widgets/e-minicard-view.c:
Added a right click menu for areas that aren't cards.
2002-04-09 Dan Winship <danw@ximian.com>
* backend/ebook/e-book-util.c (e_book_load_default_book): Update
for new-and-improved consistent default folder uri.
* gui/component/addressbook.c (addressbook_load_default_book): Use
e_book_load_default_book rather than duplicating most of its logic
here.
(load_uri_cb): Modify to work as a callback for
addressbook_load_default_book as well as addressbook_load_uri.
2002-04-08 Dan Winship <danw@ximian.com>
* gui/component/addressbook-component.c (create_view): Add
view_info arg, but don't do anything with it.
2002-04-06 JP Rosevear <jpr@ximian.com>
* gui/component/GNOME_Evolution_Addressbook.oaf.in: add
config_item:type
2002-04-04 JP Rosevear <jpr@ximian.com>
* conduit/Makefile.am: link to the static libversit
2002-04-04 Dan Winship <danw@ximian.com>
* gui/widgets/e-addressbook-util.c (e_addressbook_transfer_cards):
Update for evolution_shell_client_user_select_folder API change.
2002-04-04 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c: Remove AddressbookConfig,
ContactNew, ContactNewList EPixmap entries.
* gui/component/addressbook-factory.c (main): Print out a
debugging message just before the main loop starts, for debugging
purposes.
2002-04-02 Dan Winship <danw@ximian.com>
* backend/ebook/e-card-simple.h: Fix spelling of
E_CARD_SIMPLE_PHONE_ID_TTYTDD and E_CARD_SIMPLE_FIELD_PHONE_TTYTDD
(they previously ended with "TTD" instead of "TDD")
* backend/ebook/e-card-simple.c: Update for spelling fix.
* backend/pas/pas-backend-ldap.c: Likewise
2002-04-01 Dan Winship <danw@ximian.com>
* gui/component/select-names/e-select-names-text-model.c:
parent_class should be static. (From Max Horn <max@quendi.de>)
2002-03-29 Ettore Perazzoli <ettore@ximian.com>
* gui/component/GNOME_Evolution_Addressbook.oaf.in: Add priority
for the config page. Renamed to "Directory Servers".
2002-03-27 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_process_create_card): don't free req->vcard.
it's freed in pas_book_free_request.
(pas_backend_file_process_remove_card): don't free req->id for the
same reason.
(pas_backend_file_process_modify_card): don't free req->vcard for
the same reason.
(pas_backend_file_process_get_changes): don't free req->change_id
or release_unref the listener for the same reason.
2002-03-27 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (check_schema_support): make sure
to call ldap_value_free (values);, and ldap_msgfree (resp).
(get_ldap_library_info): don't ask me why, but it appears we have
to free each extension char*.
(query_ldap_root_dse): make sure to free values in the
subschemaSubentry code before overwriting it, and call
ldap_msgfree(resp) when we're all done.
(build_card_from_entry): don't leak the DN, ldap attributes, or
the berval the ldap_*_attribute calls use to step through the
attributes. the docs say this berval is freed when
ldap_next_attribute returns NULL, but if we don't free it it leaks
a substantial amount of memory.
(pas_backend_ldap_search): make sure to only allocate *op once,
and fix the g_warning since op isn't valid in its scope anymore.
2002-03-19 Dan Winship <danw@ximian.com>
* backend/ebook/Makefile.am: Update for libversit change: Use .a
rather than .la now.
* printing/Makefile.am: Likewise
* gui/component/Makefile.am: Likewise
2002-03-18 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c (addressbook_menu_activated):
Removed.
(addressbook_factory_new_control): Don't connect anymore, as this
signal has been removed from the ESearchBar.
(addressbook_factory_new_control): No more custom menu items here.
2002-03-15 Jeffrey Stedfast <fejj@ximian.com>
* gui/widgets/e-addressbook-view.c (table_right_click): Update to
use new EPopupMenu API.
* gui/widgets/e-addressbook-reflow-adapter.c
(e_addressbook_reflow_adapter_right_click): Update to use new
EPopupMenu API.
* gui/component/select-names/e-select-names.c
(section_right_click_cb): Update to match new EPopupMenu api.
2002-03-15 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c: Remove the
`addressbook_search_menu_items'.
(addressbook_menu_activated): Removed.
(addressbook_factory_new_control): Don't connect. No menu items.
2002-03-15 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c (control_activate): Call
`e_search_bar_set_ui_component()' to set the BonoboUIComponent for
the search bar.
* gui/component/GNOME_Evolution_Addressbook.oaf.in: Add an icon
for the LDAP sources configuration control.
2002-03-12 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c: Remove verb "AddressbookConfig".
(config_cb): Removed.
* gui/component/addressbook-config.c: Remove `dialog' member from
`AddresbookDialog'. Instead, add a `config_control' member.
(config_control_new): New.
(addressbook_config): Removed.
(addressbook_config_register_factory): New.
(config_control_factory_fn): New, factory function for the
ConfigControl page.
(addressbook_source_edit_changed): Don't change the sensitivity of
the dialog. Rather, invoke ::changed on the ConfigPage.
(auth_checkbutton_changed): No need to manually change the
sensitiviness of the buttons here either.
(add_source_clicked): Likewise, just invoke
evolution_config_control_changed().
(edit_source_clicked): Likewise.
(addressbook_dialog_close): Removed.
(config_control_destroy_callback): New, callback for when the
config control gets destroyed.
(addressbook_dialog_apply): Removed.
(config_control_apply_callback): New callback for
EvolutionConfigControl::apply.
(addressbook_dialog_ok): Removed.
(addressbook_config_control_new): Set up ->config_control and
connect the signals.
* gui/component/addressbook-config.glade: Call the main hbox in
the addressbook_sources dialog `addressbook_sources_main_hbox'.
* gui/component/addressbook-component.c (owner_set_cb): Call
`addresbook_config_register_factory'.
* gui/component/GNOME_Evolution_Addressbook.oaf.in: Add items for
OAFIID:GNOME_Evolution_Addresbook_ConfigControl and
OAFIID:GNOME_Evolution_Addressbook_ConfigControlFactory.
2002-03-11 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names.c (update_query):
change contains x-evolution-any-field to beginswith on email,
full_name, and nickname. faster, and more applicable to this
dialog.
2002-03-09 Chris Toshok <toshok@ximian.com>
* backend/idl/addressbook.idl: add TLSNotAvailable to
BookLister_CallStatus.
* backend/ebook/e-book-types.h: add TLS_NOT_AVAILABLE to the EBookStatus enum.
* backend/ebook/e-book-listener.c
(e_book_listener_convert_status): add TLS_NOT_AVAILABLE to the
switch.
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_get_static_capabilities): fix name.
(pas_backend_ldap_class_init): fix name.
(pas_backend_ldap_connect): change return type to CallStatus so we
can return different errors from here. Also, do STARTTLS if the
user has asked for it and the connection supports it, returning
TLSNotAvailable (and close the connection) if they chose to
require it.
(pas_backend_ldap_load_uri): return pas_backend_ldap_connect.
(func_beginswith): pull in change from evolution-1-0-branch to
make full_name beginswith search both cn and sn.
2002-03-09 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-view.c (jump_to_letter): since I've
gone ahead and made the file backend (by way of
pas-backend-card-sexp.c) use case insensitive searches for
beginswith, there's no need to list upper and lower case here.
* gui/component/addressbook.c (addressbook_search_option_items):
reorder things to put "Any field contains" at the end, since it's
the least efficient search. Also reorder the enum to the same
ordering. Change "Name contains" to "Name begins with" and change
"Email contains" to "Email is".
(addressbook_search_activated): change FULL_NAME to beginswith,
and change EMAIL to is to match the labels.
* backend/pas/pas-backend-card-sexp.c (compare_name): new
function, so we can compare both full and family names (so
beginswith can operate on them both.)
(endswith_helper): use e_utf8_strstrcase here, since all the
backends backends use case insensitive searching.
(func_endswith): same.
2002-03-06 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-book.c (pas_book_queue_create_card): track
union/struct change.
(pas_book_queue_remove_card): same.
(pas_book_queue_modify_card): same.
(pas_book_queue_get_cursor): same.
(pas_book_queue_get_vcard): same.
(pas_book_queue_authenticate_user): same.
(pas_book_queue_get_book_view): same.
(pas_book_queue_get_changes): same.
(pas_book_free_request): new function - free everything we need to
for each type of request.
(pas_book_destroy): call pas_book_free_request here instead of
just freeing 3 elements of the old struct. yay plugging memleaks.
* backend/pas/pas-book.h: make PASRequest a union and split out
members into structs, so it's a little clearer which fields are
used by which requests. Also, add prototype for
pas_book_free_request so backends can just free everything at once
(usually in their requests_queued signal func.)
* backend/pas/pas-backend-file.c
(pas_backend_file_process_create_card): track struct/union change.
(pas_backend_file_process_remove_card): same.
(pas_backend_file_process_modify_card): same.
(pas_backend_file_build_cards_list): same.
(pas_backend_file_process_get_vcard): same.
(pas_backend_file_process_get_cursor): same.
(pas_backend_file_process_get_book_view): same.
(pas_backend_file_process_get_changes): same.
(pas_backend_file_process_check_connection): same.
(pas_backend_file_process_authenticate_user): same.
(pas_backend_file_process_get_supported_fields): same.
(pas_backend_file_process_client_requests): case the union to the
specific struct and pass it to the process_* functions. also,
call pas_book_free_request here, instead of relying on each of the
functions to free their stuff.
2002-03-07 Dan Winship <danw@ximian.com>
* gui/component/addressbook-storage.c
(addressbook_get_other_contact_storage): Update for
evolution_storage_new() change.
2002-03-05 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_realize): don't set "editable" here, as
the way things work the backend isn't able to override a setting
from the UI, so writable books never show up as writable.
2002-03-04 Chris Toshok <toshok@ximian.com>
[fixes bug #20871]
* gui/component/select-names/select-names.glade: add the
status-message label.
* gui/component/select-names/e-select-names.h (struct
_ESelectNames): add status_message field.
* gui/component/select-names/e-select-names.c (status_message):
new function, set the label's text from the message.
(e_select_names_init): get the status-message label, and if it's
valid, connect to the status_message signal of the
EAddressbookModel.
2002-02-28 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_search): don't
ref the view here, since it keeps the view alive until the search
is over, which we don't want. we want the view's death to cancel
the search. This speeds up starting new searches after one is
already active (since switching searches actually creates a new
book view and destroys the old one.)
(ldap_search_dtor): remove the matching unref here. The unref as
it was was incorrect anyway, and caused a crash (we needed
search_op->view, not op->view.)
2002-02-27 Chris Toshok <toshok@ximian.com>
[fixes bug #20690]
* backend/pas/pas-backend-ldap.c (func_and): the data arg is not
GList** anymore, it's PASBackendLDAPSExpData*, so use
ldap_data->list instead of *list.
(func_or): same.
(func_not): same.
(func_contains): same.
(func_is): same.
(func_endswith): same.
(func_beginswith): same, but also special case the beginswith
"fileAs" query type (the one used by the alphabet buttons on the
right hand side, so we can deal with entries that don't have
fileAs attributes, and return meaningful responses.)
(pas_backend_ldap_build_query): initialize the
PASBackendLDAPSExpData struct and pass that instead of &list.
Also, take the PASBackendLDAP arg to add to the struct in case we
need it at some point in the future.
(ldap_search_handler): pass in the PASBackendLDAP.
2002-02-26 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c (pas_backend_file_search): move
card_count++ inside the if that checks to see if a card matches
(and adds the card to the list).
2002-02-24 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (addressbook_query_changed): only
handle the ESB_ADVANCED case here now. the actual query work is
done in addressbook_search_activated.
(addressbook_search_activated): split out all the searching
functionality here.
(addressbook_factory_new_control): hook up "search_activated" to
addressbook_search_activated.
2002-02-24 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c
(addressbook_source_dialog_set_source): make the right auth page
start up open.
* gui/component/addressbook-storage.c (addressbook_source_free):
free the binddn.
(addressbook_source_copy): copy the binddn;
2002-02-22 Chris Toshok <toshok@ximian.com>
[ Fixes bugs 20740, 16680, and god knows what else :) ]
* gui/widgets/e-addressbook-model.c (create_card): double the
allocated size every time we need more space instead of using a
fixed size increment. this helps huge queries. Also, remove the
gtk_object_get of "file_as", as it was dead code.
(book_view_loaded): handle errors here (by popping up a dialog).
* backend/pas/pas-backend-ldap.c (view_destroy): search_idle ->
search_timeout.
(build_card_from_entry): comment out some spew, and unref ecard
when we're done to plug a memory leak.
(send_pending_adds): send along to the client all the cards we've
been saving up.
(poll_ldap): use a timeout for ldap_result to keep the backend
from blocking (and it turns out keep the frontend from hanging
waiting on a ref to complete) on large db's with few matches.
Also, add some fairly smart, self-tuning aggregating of cards.
Keep track of the number of cards we've sent the last time through
as well as this time, and estimate the number we want to aggregate
the next time based on them (we average them at the moment),
subject to maximum/minimum number of cards. also, we have a
maximum aggregation time, after which we force a flush if there
are pending cards and recalculate our target pending number.
there's a minimum wait time to possibly keep outselves from
spamming the ui, although it's 0 at the moment.
Lastly, make sure to only notify the GUI of status messages when
we need to. this results in a *huge* savings.
(ldap_search_handler): initialize all the pending card stuff, and
use a timeout instead of an idle function for poll_ldap.
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_queue_response): performance optimization
for large adds. If we're a CardAddedEvent and there's an existing
CardAddedEvent at the end of the queue, just concat the lists of
cards together. This is to keep the gui from falling further and
further behind the ldap backend, which is merrily spewing updates
at the gui.
2002-02-21 Ettore Perazzoli <ettore@ximian.com>
* gui/component/Makefile.am: Define $(iconsdir).
* gui/component/addressbook-component.c (add_creatable_item): New
helper function.
(create_component): Add the icons for the user creatable items as
well.
2002-02-20 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c (pas_backend_file_load_uri):
track change to signature, and (for now) just change all the
return FALSE's to _RepositoryOffline (what FALSE used to map to in
pas_book_factory_process_request), and change TRUE to _Success.
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_load_uri):
track change to signature, and differentiate between
pas_backend_ldap_connect failing (RepositoryOffline), and
ldap_url_parse failing (OtherError).
* backend/pas/pas-book-factory.c
(pas_book_factory_process_request): since pas_backend_load_uri
returns status now, use it to nodify the BookListener if there's a
failure.
* backend/pas/pas-backend.c (pas_backend_load_uri): track change
to signature.
* backend/pas/pas-backend.h: change return type of
pas_backend_load_uri to
GNOME_Evolution_Addressbook_BookListener_CallStatus to allow
differentiation between failure types.
* backend/ebook/e-book-listener.c
(e_book_listener_convert_status): handle _AUTHENTICATION_FAILED.
* backend/ebook/e-book-types.h (EBookStatus): add
_AUTHENTICATION_FAILED.
2002-02-18 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-book-factory.c
(pas_book_factory_process_request): if the load_uri fails, notify
the listener that the repository is offline. (partial fix for bug
20347)
2002-02-18 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (create_dn_from_ecard): escape
commas in the dn, since they're used by ldap to specify the node's
placement in the tree. (fixes bug 20089)
(rfc2254_escape): just use sprintf and %02X instead.
2002-02-13 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c (set_book): Keep a
ref of the model in this case as well.
2002-02-13 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c (set_book): Make
sure to only set the query once when creating a new book and not
at all on addressbook model creation. This prevents an accidental
pair of changes from making the addressbook model load a remote
addressbook.
* gui/widgets/e-addressbook-model.c (get_view): If this is the
first_get_view and the addressbook is remote, empty the view
instead of leaving it in the state it used to be in. This only
occurs if you set the book after the model has existed for a
while.
(e_addressbook_model_set_arg): When setting the book, set
first_get_view to TRUE.
2002-02-13 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c (display_view): Attach to the
emvw instead of the emv here.
* gui/widgets/e-minicard-view-widget.c, e-minicard-view-widget.h:
Made this object have a "column_width" argument and a
"column_width_changed" signal which are a simple layer down to the
EMinicardView contained within.
* gui/widgets/gal-view-minicard.c, gui/widgets/gal-view-minicard.h
(gal_view_minicard_attach): Made this attach to an
EMinicardViewWidget instead of a EMinicardView.
2002-02-13 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book-util.c, backend/ebook/e-book-util.h
(e_book_expand_uri, e_book_load_address_book_by_uri,
e_book_use_address_book_by_uri): New functions that take a file://
url ending in the directory name and automatically append the
addressbook.db and do the appropriate thing.
* backend/pas/pas-backend-card-sexp.c,
backend/pas/pas-backend-card-sexp.h: Added copyright notice here.
* gui/component/addressbook-component.c
(destination_folder_handle_drop), gui/component/addressbook.c
(set_prop): Use e_book_expand_uri instead of
addressbook_expand_uri.
* gui/component/addressbook-storage.c: Fixed the fcntl include
here.
* gui/component/addressbook.c (ContactsCopyToFolder,
ContactsMoveToFolder): Added handlers for these two verbs.
* gui/component/addressbook.h: Removed addressbook_expand_uri in
favor of e_book_expand_uri.
* gui/widgets/e-addressbook-reflow-adapter.c (transfer_cards):
Added code to handle Move to and Copy to right click menu items.
* gui/widgets/e-addressbook-util.c,
gui/widgets/e-addressbook-util.h (e_addressbook_transfer_cards):
New function to pop up a dialog and transfer a set of cards to the
given folder.
* gui/widgets/e-addressbook-view.c,
gui/widgets/e-addressbook-view.h (display_view): Don't attach to
the view if it doesn't exist yet. We have to make this then
attach later.
(e_addressbook_view_copy_to_folder,
e_addressbook_view_move_to_folder): New functions utilizing
e_addressbook_transfer_cards.
(table_right_click): Add copy_to_folder and move_to_folder to the
right click menu for tables here.
(e_addressbook_view_discard_menus): Handle menu unmerging here.
* gui/widgets/e-minicard-view-widget.h (struct
_EMinicardViewWidget): Removed unused field.
2002-02-13 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c (display_view): Attach the
GalViewMinicard to the EMinicardView here.
* gui/widgets/gal-view-minicard.c, gui/widgets/gal-view-minicard.h
(gal_view_minicard_load, gal_view_minicard_save): Made these save
the column width of the view.
(gal_view_minicard_attach, gal_view_minicard_detach): Added these
functions to allow the GalViewMinicard to set the column width of
a EMinicardView and to monitor its changes.
2002-02-12 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c
(addressbook_get_arg): Added an argument to get the model.
* gui/widgets/e-addressbook-view.c (writable_status): Don't bother
connecting to the writable_status callback on the book, simply
rely on the writable_status callback on the addressbook model.
* gui/widgets/e-minicard-view.c, gui/widgets/e-minicard-view.h
(set_empty_message): Handle the case of a read only view here.
2002-02-07 JP Rosevear <jpr@ximian.com>
* gui/component/addressbook-component.c (create_component): remove
"New" from user creatable menu items
2002-02-07 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c,
gui/widgets/e-addressbook-view.h
(e_addressbook_view_setup_menus): Changed this function to use the
new GalViewMenus which takes a GalViewInstance, instead of a
GalViewCollection.
2002-02-04 JP Rosevear <jpr@ximian.com>
* gui/contact-editor/e-contact-editor.c (find_address_mailing): tidy
* conduit/address-conduit.c (addrconduit_load_configuration): load
default address setting
(addrconduit_save_configuration): save default address setting
(e_addr_gui_new): new gui routine for conduit settings
(e_addr_gui_fill_widgets): ditto
(e_addr_gui_fill_config): ditto
(e_addr_gui_destroy): ditto
(e_addr_context_destroy): destroy the gui and new_cfg
(local_record_from_ecard): reinstate commented out bits, determine
which address to sync to pilot
(ecard_from_remote_record): determine which address to sync from
pilot
(fill_widgets): put the gui widgets in
(create_settings_window): create gui
(save_settings): fill gui
2002-02-04 JP Rosevear <jpr@ximian.com>
* gui/contact-editor/e-contact-editor.c (address_text_changed): if
the shown address in the mailing address or there is no mailing
address, set the default flag and make sure the button is checked
(address_mailing_changed): set the flags properly when the mailing
address changes
(e_contact_editor_init): listen for the check button being toggled
(find_address_mailing): find the address (if any) with the default
flag
(set_address_field): set the mailing address button appropriately
(fill_in_info): find the mailing address
* gui/contact-editor/e-contact-editor.h: add new class data member
* gui/contact-editor/contact-editor.glade: show mailing address
check button
2002-02-01 Jeffrey Stedfast <fejj@ximian.com>
* backend/ebook/e-destination.c (e_destination_is_auto_recipient):
New function to find out if a destination was one which was
auto-matically set by Evolution.
(e_destination_set_auto_recipient): Set whether or not the dest is
an auto-recipient.
(e_destination_touch): Don't touch the address if it is an
auto_recipient.
(e_destination_list_to_vector_sized): New function to avoid having
to calculate the length of the list ourselves. Allows for a bit of
optimization if our caller knows the length of the list.
(e_destination_xml_encode): Encode the auto_recipient bit.
(e_destination_xml_decode): Decode the auto_recipient bit.
2002-02-01 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.c (e_card_simple_sync_card): Made
this preserve addressbook flags other than the first three.
* backend/ebook/e-card-types.h: Added E_CARD_ADDR_MASK and
E_CARD_ADDR_DEFAULT.
* backend/ebook/e-card.c (get_address_flags): Added "PREF" to
E_CARD_ADDR_DEFAULT mapping.
* backend/ebook/test-client.c: Added #include "e-book-util.h".
2002-01-30 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c (pas_backend_file_changes):
compute the change db filename based on our contact db filename.
(pas_backend_file_load_uri): store the filename in
bf->priv->filename.
(pas_backend_file_destroy): free the filename, and (!) free
bf->priv too.
2002-01-28 Jeffrey Stedfast <fejj@ximian.com>
* backend/ebook/e-destination.c (e_destination_is_valid): Revert
my previous change as trow says this will break auto-completion
stuff.
2002-01-27 Ettore Perazzoli <ettore@ximian.com>
* gui/contact-editor/Makefile.am: Use EVOLUTION_ADDRESSBOOK_CFLAGS.
* gui/contact-list-editor/Makefile.am: Likewise.
* gui/merging/Makefile.am: Likewise.
* gui/search/Makefile.am: Likewise.
* gui/component/select-names/Makefile.am: Likewise.
2002-01-25 Jeffrey Stedfast <fejj@ximian.com>
* backend/ebook/e-destination.c (e_destination_is_valid): Don't
check for an @ in the email address. This is to fix bug #10960.
2002-01-24 Chris Toshok <toshok@ximian.com>
[ fixes bug 16097 ]
* gui/component/addressbook-config.glade: gui love for the new
auth stuff.
* gui/component/addressbook.c (load_uri_cb): track change to auth,
and offer up different prompt strings depending on which method
(binddn or email) we're using.
* gui/component/addressbook-storage.c (ldap_unparse_auth): use the
new auth types for ldap.
(ldap_parse_auth): same.
(addressbook_storage_auth_type_to_string): new function.
(load_source_data): get the binddn too.
(ldap_source_foreach): store out binddn or emailaddr, depending on
the auth type chosen.
* gui/component/addressbook-storage.h: add the more detailed auth
types, add "binddn" to the source structure, and add a prototype
for addressbook_storage_auth_type_to_string.
* gui/component/addressbook-config.c (auth_checkbutton_changed):
set the auth stuff (in)sensitive.
(auth_optionmenu_activated): new function.
(addressbook_source_dialog_set_source): track UI change.
(addressbook_source_dialog_get_source): same.
(add_scope_activate_cb): rename add_activate_cb to this to
distinguish it from the auth stuff.
(add_auth_activate_cb): new function.
(addressbook_source_dialog): track change to auth UI stuff.
(addressbook_storage_auth_type_to_string): new function.
* backend/ebook/e-book.h: add auth_method arg to
e_book_authenticate_user.
* backend/ebook/e-book.c (e_book_authenticate_user): track change
to prototype - add auth_method arg, and pass it along to the CORBA
call.
* backend/ebook/test-client.c (book_open_cb): track api change -
keep this building.
* backend/pas/pas-book.h: add auth_method slot in PASRequest.
* backend/pas/pas-book.c (pas_book_queue_authenticate_user): add
auth_method arg and add it to the PASRequest.
(impl_GNOME_Evolution_Addressbook_Book_authenticateUser): track
idl change, add auth_method and pass it along to
pas_book_queue_authenticate_user.
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_process_authenticate_user): support both
"ldap/simple-email" and "ldap/simple-binddn" auth methods.
* backend/idl/addressbook.idl: add "in string authMethod" to
authenticateUser.
2002-01-24 Ettore Perazzoli <ettore@ximian.com>
* conduit/Makefile.am: Use EVOLUTION_ADDRESSBOOK_CONDUIT_CFLAGS
and EVOLUTION_ADDRESSBOOK_CONDUIT_LIBS and remove unused flags
* gui/component/Makefile.am: Use EVOLUTION_ADDRESSBOOK_CFLAGS and
EVOLUTION_ADDRESSBOOK_LIBS and remove unused flags.
* backend/pas/Makefile.am: Likewise.
* backend/ebook/Makefile.am: Likewise.
* printing/Makefile.am: Likewise.
* backend/ebook/Makefile.am: Likewise.
* gui/widgets/Makefile.am (INCLUDES): Likewise.
2002-01-23 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (create_component): Pass a
NULL @icon to
`evolution_shell_component_add_user_creatable_item()'.
2002-01-23 Ettore Perazzoli <ettore@ximian.com>
* gui/contact-editor/e-contact-editor-address.c: #include
<locale.h>.
2002-01-22 Chris Toshok <toshok@ximian.com>
[ fixes bug # 16864 ]
* backend/ebook/evolution-ldif-importer.c (getValue): create and
return a GString here, instead of writing to a fixed size buffer.
(parseLine): use a GString here instead of a fixed size buffer.
2002-01-21 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-ldap.c (ldap_search_handler): Set the
number of cards to return to the value specified in the ldap uri,
leaving the default at 100. Fixes Ximian bug #13953.
* gui/component/addressbook-config.c (addressbook_source_dialog),
gui/component/addressbook-config.glade: Added a limit entry here
to edit the limit field of the source.
* gui/component/addressbook-storage.c,
gui/component/addressbook-storage.h
(addressbook_storage_init_source_uri): Added a limit field to this
class and pass that value through in the uri that's generated.
2002-01-18 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-compare.c: Made username match with no
domain match be vague instead of partial. Fixes Ximian bug
#13612.
2002-01-18 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook.c (view_contact_cb): New verb to open
a bunch of cards.
* gui/widgets/e-addressbook-reflow-adapter.c (open_card): Call
e_addressbook_show_multiple_cards instead of doing this ourselves.
* gui/widgets/e-addressbook-util.c,
gui/widgets/e-addressbook-util.h
(e_addressbook_show_multiple_cards): Added this function to show a
bunch of cards, including a dialog if lots of windows are going to
appear.
* gui/widgets/e-addressbook-view.c (e_addressbook_view_view,
e_addressbook_view_can_view): e_addressbook_view_view calls
e_addressbook_show_multiple_cards on the appropriate list of
cards.
2002-01-18 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/e-contact-editor-address.c
(fill_in_countries), gui/contact-editor/fulladdr.glade: Sort
country list. Country list moves from fulladdr.glade to
e-contact-editor-address.c, but only a few country names have
actually changed. Fixes Ximian bug #16545.
2001-12-20 Zbigniew Chyla <cyba@gnome.pl>
Fixes #17725
* evolution/addressbook/printing/e-contact-print.c (complete_sequence):
Do not assume that the first byte of file_as is the first letter, use
utf8 functions instead.
2002-01-16 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c: move all functions here, get rid of
header files, use e-pilot-settings to display gui
2002-01-15 JP Rosevear <jpr@ximian.com>
* gui/component/select-names/select-names.glade: remove misleading
title and fix spacing
2002-01-11 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook.c (alphabet_state_changed): Handle
setting the search bar to "Advanced..." when the alphabet buttons
are pushed and back when they're cleared. Fixes Ximian bug
#12904.
(addressbook_menu_activated): When the user calls Search->clear,
set the search to ESB_ANY and "", don't just set the text. This
is especially useful when it's set to ESB_ADVANCED.
* gui/widgets/e-addressbook-view.c,
gui/widgets/e-addressbook-view.h (alphabet_state_change): Added
this signal which gets emitted when the alphabet buttons are
pushed.
(command_state_change): Removed the ref pair here. It's not
necessary. gtk_signal_emit refs the object itself.
2002-01-11 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-compare.c (name_synonyms): Added a couple
of names here.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_get_nth_obj): Removed an unused
variable.
2002-01-11 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c,
gui/widgets/e-addressbook-view.h (create_alphabet): Use toggle
buttons here. Fixes Ximian bug #10734.
2002-01-09 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/e-contact-editor.c (set_fields): Choose the
first filled in address field here. Fixes Ximian bug #2222.
2002-01-03 Joe Shaw <joe@ximian.com>
* backend/ebook/test-card.c: Add a test for getting arbitrary
fields.
* backend/pas/pas-backend-card-sexp.c (compare_arbitrary): Added.
(prop_info_table): Add a LIST_PROP for arbitrary fields.
2002-01-03 Nat Friedman <nat@ximian.com>
* backend/ebook/e-book.c (activate_factories_for_uri): Free the
query if the oaf response is of zero length.
2001-12-27 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(real_add_address_cb): When we clean, don't clean the model's last
element. This helps keep things working properly when we have
signal-character separators.
(section_right_click_cb): Changed to work properly with our
EText-emitted popup signal.
(e_select_names_add_section): Use ETexts for the recipient
sections, rather than tables. This lets us make them directly
editable. (Bug #1721)
* gui/component/select-names/e-select-names-popup.c
(popup_info_new): Pass in a ESelectNamesTextModel, not a
ESelectNamesModel.
(e_select_names_popup): Adjust for the new signature for
e_select_names_model_text_pos.
* gui/component/select-names/e-select-names-manager.c
(focus_out_cb): Schedule a cleaning when we focus out.
(focus_in_cb): Cancel pending cleaning when we get focus. This
helps us avoid bad things happening during the fast focus out/ins
that happen when the completion dropdown appears.
(completion_handler): Adjust for new signatures of
e_select_names_model_text_pos and e_select_names_model_name_pos.
(e_select_names_manager_entry_new): Pass in our
ESelectNamesTextModel when constructing the
ESelectNamesCompletion.
(e_select_names_manager_entry_free): Cancel any pending clean-ups.
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): Get the text off of the text model.
Which is the only way that really makes sense when you think about
it.
* gui/component/select-names/e-select-names-completion.c: Added a
copy of the associated ESelectNamesTextModel to
ESelectNamesCompletionPrivate. This replaces the
ESelectNamesModel.
(e_select_names_completion_destroy): Unref ->text_model.
(e_select_names_completion_handle_request): Pass in our text
model's separator info when calling e_select_names_model_text_pos.
(e_select_names_completion_new): Pass in the text model as an arg
instead of the model, and ref it as needed.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_init): Set separator as either ", " or
",", depending on the value of the EVOLUTION_DISABLE_MAGIC_COMMA
environment variable.
(e_select_names_text_model_destroy): Free the separator.
(changed_cb): Flush our cached text on changed.
(e_select_names_text_model_set_source): Use our own changed_cb
callback on changed, rather than just connecting up
e_text_model_changed.
(e_select_names_text_model_set_separator): Added. Lets the
separator between recipients be specified.
(e_select_names_text_model_get_text): Cache the text we get from
calling e_select_names_model_get_textification.
(e_select_names_text_model_insert_length): A bunch of small
changes to properly support generic separators, rather than
(implicit and explicitly) assuming ", ".
(e_select_names_text_model_delete): More small tweaks to handle
generic separators.
(e_select_names_text_model_get_nth_obj): Use new signature when
calling e_select_names_model_name_pos, and use our cached text.
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_destroy): We don't cache the text or
addr_text anymore, so no need to free them here.
(e_select_names_model_changed): ...and no need to reset our text
and addr_text caches here.
(e_select_names_model_get_textification): Take a separator as an
arg, rather than just using ", ". Also, no caching.
(e_select_names_model_get_address_text): Take a separator as an
arg, rather than just using ", ". And no caching here either.
(e_select_names_model_clean): Add arg that give us control over
whether or not the last entry should get cleaned. We need this
when using a one-character separator, so that new destinations
that get tacked onto the end don't get immediately cleaned away
for being empty.
(e_select_names_model_name_pos): Take the separator length as an
argument, remove implicit assumption of length 2.
(e_select_names_model_text_pos): Take the separator length as an
argument, remove implicit assumption of length 2.
2001-12-20 Ettore Perazzoli <ettore@ximian.com>
[Fix #17377, Evolution doesn't work on multi-depth displays.]
* gui/component/addressbook-factory.c (main): Push GdkRGB visual
and colormap.
2001-12-19 Jon Trowbridge <trow@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c
(e_addressbook_reflow_adapter_right_click): Add cut/copy/paste to
right-click menu.
* gui/widgets/e-addressbook-view.c (table_right_click): Add
cut/copy/paste to right-click menu. (Fixes bug #14528.) Also,
disable some right-click options if our addressbook isn't
editable.
2001-12-18 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (check_for_slow_setting): go slow and
clear the map if the last uri and the current uri do not match
(post_sync): save the last uri
* conduits/address-conduit-config.h: handle a last uri config
option
2001-12-18 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (addressbook_default_book_open):
change this to match its e-book counterpart, and only failover to
the local addressbook if the protocol wasn't supported. that way
errors like "failure to connect" are still reported to the user.
* backend/ebook/e-book-util.h: add prototypes for
e_book_load_default_book and e_book_get_config_database.
* backend/ebook/e-book-util.c (e_book_default_book_open): new
function, basically cut and paste addressbook_default_book_open
from addressbook.c here.
(e_book_load_default_book): cut and past
addressbook_load_default_book here, pretty much, except leave off
the auth stuff.
(e_book_get_config_database): new function, returns the
Bonobo_ConfigDatabase for e_book_load_default_book to use.
* conduit/address-conduit.c (start_addressbook_server): use
e_book_load_default_book here.
2001-12-17 Chris Toshok <toshok@ximian.com>
[ fixes bug 17355 ]
* gui/component/select-names/e-select-names.c (new_folder): if
we're dealing with an LDAP folder, prepend [LDAP] to it. Now that
we have 3 different places where folders are coming from, it helps
to be able to differentiate "Contacts" in ~/evolution and a
"Contacts" ldap server and a "Contacts" exchange folder.
(add_additional_select_names_uris): loop through the bonobo conf
settings for additional folders, adding them to the option menu.
(e_select_names_hookup_shell_listeners): call
add_additional_select_names_uris.
2001-11-28 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_realize): Use an #ECanvasBackground here
instead of a #GnomeCanvasRect.
2001-12-16 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c: Added
'cache_complete' flag to ESelectNamesCompletionPrivate.
(e_select_names_completion_seq_complete_cb): Set cache_complete
to TRUE if our query wasn't interrupted.
(e_select_names_completion_start_query): Set cache_complete to
FALSE at the beginning of a potentially-cached query.
(e_select_names_completion_do_query): Only reuse cached cards
if cache_complete is TRUE. (Fixes bug #10241)
2001-12-15 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (e_addr_context_destroy): don't free
the hash table keys, we didn't allocate them and free the change
objects and unref the associated cards
(local_record_from_uid): unref the temp card we create
(replace_record): ref the new card associated with the card change
and unref the old one
2001-12-13 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (local_record_from_ecard): Make sure
to copy the custom fields so they are not overwritten
2001-12-13 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-book-util.c (simple_query_new): Used
g_strdup_printf to dup a string. Doh! Changed to g_strdup.
(Bug #17126)
2001-12-07 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_entry_new): Remove a reference to code
I don't want to commit yet. :-)
* gui/component/select-names/e-select-names-manager.c: Extensively
refactored -- this code had gotten _really_ ugly. Untangle things
to the point where our reference counting problems are fixable.
* gui/component/select-names/e-select-names-bonobo.c
(impl_destroy): Remove all of the ugly hacks to work around our
memory management problems, and just unref the manager.
(Fixes #14412)
2001-12-05 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c
(search_for_dn_with_objectclasses): move search_for_dn's contents
here, and add an "existing_objectclasses" parameter that we pass
on to build_card_from_entry.
(search_for_dn): call search_for_dn_with_objectclasses with NULL
for existing_objectclasses.
(build_card_from_entry): if existing_objectclasses is non-NULL,
fill it in with the list of existing objectclass values for this
entry.
(add_objectclass_mod): if existing_objectclasses is non-NULL,
meaning we're modifying an entry, search in the existing
objectclasses for the ones we want to be there, and only add
what's missing. If none are missing, don't add objectclass_mod to
the list of mods.
(create_card_handler): track change to add_objectclass_mod (pass
NULL).
(modify_card_handler): use search_for_dn_with_objectclasses
instead of search_for_dn, and pass the existing objectclasses to
add_objectclass_mod. also, free the list when we're done.
(poll_ldap): track change to build_card_from_entry (pass NULL).
2001-12-05 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor.c (enable_writable_fields):
we need to be able to disable non-labels here as well. since
we're using enable_widget and not gtk_widget_set_sensitive, it's
okay to handle entries/text's, etc, here.
(widget_field_mappings): add label-caluri and label-fburl here.
* gui/contact-editor/contact-editor.glade: change the label names
for the freebusy/calendar urls to have more descriptive names,
since we use them in e-contact-editor.c now.
* backend/pas/pas-backend-ldap.c: add support for
caluri/calendarURI, fburl/freeBusyURI.
* backend/pas/evolutionperson.schema: add calendarURI and
freeBusyURI.
2001-12-04 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/contact-editor.glade: Fixed up the
accelerators and such here.
* gui/contact-editor/e-contact-editor.c (file_save_as_cb):
Translate this string.
(pixmaps): Added a pixmap for the ContactEditorSaveClose command.
(setup_tab_order): Fixed up the tab order here.
* gui/contact-editor/fulladdr.glade: Made the country combo
focusable here.
2001-12-03 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-destination.c (e_destination_equal): Make address
comparisons case-insensitive. (Fixes 11776)
* backend/ebook/e-card.c (e_card_email_match_single_string): Make address
host comparisons case-insensitive. (Fixes 11776)
* gui/component/select-names/e-select-names-manager.c (focus_out_cb): Clean
ESelectNamesModel on focus-out. (Half of a fix for 15656)
* backend/ebook/e-destination.c (nonempty): Fix this function
and make it utf8-safe. (The other half of the fix for 15656)
2001-11-28 Christopher James Lahey <clahey@ximian.com>
* gui/contact-list-editor/e-contact-list-editor.c: Consistency
fixes with standard contact editor. Added Save As, Send As, and
Send To. Replaced Save toolbar with Save and Close and added Save
and Close menu item. Added a trash icon.
2001-11-28 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/e-contact-editor-address.c (setup_tab_order):
Setup the tab order here. Fixes Ximian bug #13751.
2001-11-28 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook.c (connect_master_list_changed,
make_suboptions): Changed how this list of categories gets
computed. Fixes Ximian bugs #7707 and #7708.
2001-11-15 Zbigniew Chyla <cyba@gnome.pl>
* printing/e-contact-print-envelope.c (ecpe_linelist_dimensions),
printing/e-contact-print.c (e_contact_divide_text, e_contact_output,
e_contact_rectangle, e_contact_print_letter_tab,
e_contact_print_letter_heading, e_contact_get_card_size,
e_contact_print_card, e_contact_print_phone_list):
s/gnome_font_get_width_string/gnome_font_get_width_utf8/
s/gnome_font_get_width_string_n/gnome_font_get_width_utf8_sized/
2001-11-14 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (search_for_dn): check against
LDAP_SUCCESS as the return value, not -1.
(pas_backend_ldap_build_all_cards_list): same.
(pas_backend_ldap_process_authenticate_user): same.
2001-11-12 Chris Toshok <toshok@ximian.com>
[ Fixes Ximian bug #14843 ]
* backend/pas/pas-backend-ldap.c (func_and): don't crash if a
subexpression wasn't filled in.
* backend/pas/pas-backend-ldap.c (func_or): same.
2001-11-12 Jon Trowbridge <trow@ximian.com>
* gui/contact-list-editor/e-contact-list-editor.c (list_added_cb):
Release callback's reference to EContactListEditor.
(list_modified_cb): Release callback's reference to
EContactListEditor.
(save_card): Ref the EContactListEditor on behalf of the
e_book_foo callback. (Fixes bug #14743)
(save_card): Set changed to false once we've saved.
(list_deleted_cb): Release callback's reference.
(delete_cb): Hold reference for the callback.
2001-11-12 Jon Trowbridge <trow@ximian.com>
* gui/contact-editor/e-contact-editor.c (categories_clicked): If
our call to e_categories_new returns NULL, put up an error dialog
and return. (Fixed #14780)
2001-11-09 Chris Toshok <toshok@ximian.com>
[ Fixes Ximian bug #14687 ]
* backend/pas/pas-backend-file.c
* backend/pas/pas-book-factory.c
(pas_book_factory_process_request): do load_uri before add_client,
so we know if the load actually worked (add_client uses this
information to respond to the new client.) before this change,
the client would still think the book was in a useful state even
if the load_uri failed.
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_add_client): if
the we're not connected, say so.
* backend/pas/pas-backend-file.c (pas_backend_file_add_client):
same.
(pas_backend_file_load_uri): don't report_writable here,
add_client does it. was only needed before because of the
improper ordering in pas-book-factory.c above.
2001-11-09 Chris Toshok <toshok@ximian.com>
[ Fixes Ximian bug #14646 ]
* gui/component/addressbook.c (addressbook_default_book_open): new
function. if the default_book failed to load, load the local
addressbook in its place.
addressbook_load_default_book): if we're loading the default_book
uri, use addressbook_default_book_open as the open_response.
* backend/ebook/e-book.c (e_book_load_uri_step): reset the
load_state to NotLoaded so we can attempt another load_uri on
the book if it fails.
2001-11-08 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-bonobo.c
(impl_destroy): Explicitly destroy entries. Part of the fix for
the lingering completion window bug.
2001-11-04 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c: Use ordering of the pilot's phone
label list to find fields we sync in order to avoid strcmp'ing the
pilot's labels rendering phone syncing usable only for english
language pilots
2001-11-03 Chris Toshok <toshok@ximian.com>
[ Fixes Ximian bug #14410 ]
* gui/contact-editor/e-contact-editor.c (e_contact_editor_init):
init in_async_call to FALSE.
(card_added_cb): turn the UI back on and set in_async_call to
FALSE.
(card_modified_cb): same.
(card_deleted_cb): same.
(save_card): turn off the UI by setting the dialog insensitive,
and set in_async_call to TRUE.
(delete_cb): same.
(app_delete_event_cb): if we're in an async call don't let the
window get deleted.
* gui/contact-editor/e-contact-editor.h (struct _EContactEditor):
add in_async_call flag for when we make a wombat call and need to
disable the UI.
* gui/contact-list-editor/e-contact-list-editor.c
(e_contact_list_editor_init): init in_async_call to FALSE.
(list_added_cb): turn the UI back on and set in_async_call to
FALSE.
(list_modified_cb): same.
(list_deleted_cb): same.
(save_card): turn off the UI by setting the dialog insensitive,
and set in_async_call to TRUE.
(delete_cb): same.
(app_delete_event_cb): if we're in an async call don't let the
window get deleted.
* gui/contact-list-editor/e-contact-list-editor.h (struct
_EContactListEditor): add in_async_call flag for when we make a
wombat call and need to disable the UI.
2001-11-02 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.c (e_card_simple_get): Check for
NULL dates before converting them to strings. Fixes Ximian bug
#14394.
2001-11-02 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-bonobo.c
(impl_destroy): Leak select-names related data structures until
the memory management issues get sorted out. Fixed bug #14086.
2001-10-31 Christopher James Lahey <clahey@ximian.com>
* gui/component/e-cardlist-model.c,
gui/component/select-names/e-select-names-table-model.c,
gui/widgets/e-addressbook-table-adapter.c: Make the pre_changes
and changes match here.
2001-10-31 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_destroy): Check that local_listener and
other_contacts_listener are non-NULL before
disconnecting/unrefing.
* gui/component/select-names/e-select-names-manager.c
(entry_destroyed): The entry shouldn't unref the manager.
(e_select_names_manager_create_entry): The entry shouldn't hold a
ref to the manager. It becomes circular.
(e_select_names_manager_create_entry): On the other hand, we
should hold a ref to the entry we create.
* gui/component/select-names/e-select-names-bonobo.c
(impl_destroy): Remove the explicit dialog destroy hack.
2001-10-30 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-bonobo.c
(impl_destroy): Force the select names dialog to be destroyed.
This is a hack to fix bug #14002 -- I'll clean up the refcounting
issues post-freeze. At least now it won't crash.
2001-10-30 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (ecard_from_remote_record): make sure
to translate the character sets of the names
2001-10-30 JP Rosevear <jpr@ximian.com>
* gui/component/select-names/e-select-names-bonobo.c
(manager_ok_cb): send a null bonobo arg to prevent explosion
2001-10-30 JP Rosevear <jpr@ximian.com>
* gui/widgets/e-addressbook-view.c: correct include typo
2001-10-29 Jon Trowbridge <trow@ximian.com.
* gui/widgets/e-minicard.c (add_field): Five characters, not four!
* gui/widgets/e-addressbook-table-adapter.c
(addressbook_value_at): Convert xml-ified destinations into proper
addresses.
2001-10-29 Jon Trowbridge <trow@ximian.com.
* gui/component/select-names/e-select-names-bonobo.c (init):
Connect to manager's "ok" signal.
(manager_ok_cb): Emit "ok" bonobo-signal.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_class_init): Added "ok" signal.
(e_select_names_clicked): Emit 'ok' signal.
2001-10-29 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-util.c
(e_addressbook_prompt_save_dialog): new function, a "Do you want
to save changes?" dialog.
* gui/widgets/e-addressbook-util.h: add prototype for
e_addressbook_prompt_save_dialog.
* gui/contact-editor/e-contact-editor.c (prompt_to_save_changes):
call e_addressbook_prompt_save_dialog and save the card if they
select save. return TRUE if the dialog should be closed, FALSE
otherwise.
(file_close_cb): check prompt_to_save_changes before closing the
dialog.
(app_delete_event_cb): same.
* gui/contact-list-editor/e-contact-list-editor.c
(prompt_to_save_changes): call e_addressbook_prompt_save_dialog
and save the card if they select save. return TRUE if the dialog
should be closed, FALSE otherwise.
(file_close_cb): check prompt_to_save_changes before closing the
dialog.
(app_delete_event_cb): same.
2001-10-29 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (add_objectclass_mod): overload
this function for modifying objectclasses too, so we can make sure
evolutionPerson shows up in the objectclasses of an entry if it
shows up in the schema for the server.
(create_card_handler): add @replace = FALSE in the call to
add_objectclass_mod.
(modify_card_handler): call add_objectclass_mod with @replace =
TRUE.
(anniversary_compare): fix typo - return "equal", not "TRUE".
(birthday_compare): same.
2001-10-29 Jon Trowbridge <trow@ximian.com>
* conduit/address-conduit.c (pre_sync): Comment out spew.
* gui/contact-list-editor/e-contact-list-editor.c (fill_in_info):
Comment out spew.
* gui/component/addressbook-component.c
(destination_folder_handle_drop): Comment out spew.
(get_dnd_selection): Comment out spew.
* gui/widgets/e-addressbook-table-adapter.c
(addressbook_set_value_at): Comment out spew.
2001-10-29 Jon Trowbridge <trow@ximian.com>
* gui/component/addressbook.c (update_command_state): Check that
our BonoboUIComponent has a container so we don't get a lot of
annoying debug spew.
* printing/smallbook.ecps: Fixed fonts.
* printing/phonelist.ecps: Fixed fonts.
* printing/medbook.ecps: Fixed fonts.
* printing/e-contact-print.c (e_contact_get_card_size): Commented
out spew.
* gui/widgets/e-minicard.c (remodel): Check that e_minicard->card
!= NULL.
2001-10-29 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_destroy): We were using
book_data->book_view immediately after unrefing it. Reordered the
code a bit to avoid this.
2001-10-29 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-book-factory.h: add prototype for
pas_book_factory_dump_active_backends.
* backend/pas/pas-book-factory.c
(pas_book_factory_dump_active_backends): new function.
(dump_active_server_map_entry): new function.
2001-10-29 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(make_match): Drop a match if either of the text fields is NULL.
This could happen if any of the utf-8 involved is invalid, for
example. (Bug #13757)
2001-10-29 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (is_syncable): fix bug that allowed
for phone's not to be in priority order and the item to still be
syncable
* conduit/address-conduit-config.h
(addrconduit_load_configuration): get management by id
2001-10-29 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (is_syncable): a card also needs to
have its phone nums in priority order to be "syncable"
2001-10-29 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (is_syncable): move the syncable
checking code to a different function
(ecard_from_remote_record): set the name parts individually
(local_record_from_ecard): use is_syncable
2001-10-29 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.c (file_as_get_style,
file_as_set_style): Use the actual ECardName in the ECard instead
of parsing the full_name here.
2001-10-29 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h
(e_card_simple_set_name): New function to set the ECardName on
this card and fix the file_as if necessary.
2001-10-29 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h
(e_card_simple_get): Handle returning dates here.
(e_card_simple_get_allow_newlines): New function. Returns whether
it makes much sense to have newlines in this string.
* gui/component/addressbook-config.c,
gui/component/addressbook-config.h
(addressbook_create_new_source): The first argument here should
be const.
* gui/component/addressbook-storage.c: Added #include
"addressbook-config.h".
* gui/widgets/e-minicard-label.c (e_minicard_label_event): On an
escape here, cancel editing and remove the focus from the text.
* gui/widgets/e-minicard.c (add_field): Set allow_newlines here.
(field_activated): Stop editing on the activate signal and remove
the focus from the text. Fixes Ximian bug #12286.
2001-10-28 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.h: tidy
* conduit/address-conduit-config.h: ditto
* conduit/address-conduit.c (add_record): unref ecard when done
2001-10-28 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-card.c (e_card_date_from_string): Expose this
function.
(e_card_date_to_string): ...and this one. Fixes build problem in
pas-backend-ldap.c.
2001-10-28 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_hookup_shell_listeners): Change "this should never
happen" dialog to not give my name/e-mail. Sorry translators.
But this really should never happen, thanks to my fix below.
* gui/component/addressbook-component.c: Initialize
global_shell_client to NULL. (Bug #6625)
2001-10-27 Chris Toshok <toshok@ximian.com>
[ bug #12979 ]
* backend/pas/pas-backend-ldap.c (anniversary_populate): new
function.
(anniversary_ber): new function.
(anniversary_compare): new function.
(birthday_populate): new function.
(birthday_ber): new function.
(birthday_compare): new function.
2001-10-27 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_destroy): free up all the book_data
list stuff.
(e_select_names_completion_got_book_view_cb): deal with book_data
being passed as the closure, and increment the
pending_completion_seq counter.
(e_select_names_completion_card_added_cb): deal with book_data
being passwd as the closure.
(e_select_names_completion_seq_complete_cb): same, and decrement
the pending_completion_seq if we haven't gotten one for this book
view before.
(e_select_names_completion_stop_query): cancel all the
book_data's.
(e_select_names_completion_start_query): use the books_not_ready
counter instead of book_ready. also, do e_book_get_book_view on
each of the book's in our list.
(e_select_names_completion_do_query): change to deal with our
list.
(e_select_names_completion_book_ready): decrement the
book_not_ready counter.
(e_select_names_completion_new): add the book we're created with
to our list.
(e_select_names_completion_add_book): implement.
* gui/component/select-names/e-select-names-completion.h: add
prototype for e_select_names_completion_add_book.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_new): use addressbook_config_data, and
don't unref the db.
(e_select_names_manager_create_entry): always add NULL for a book
(which corresponds to the local book), and if the completion_book
is present, add it to the list of books to complete again.
2001-10-27 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-quick-add.c (merge_cb): change to
EBookCallback signature, and unref the book.
(quick_add_merge_card): use addressbook_load_default_book.
(ce_have_book): change to EBookCallback signature, and unref the
book.
(edit_card): use addressbook_load_default_book.
* gui/component/e-address-popup.c (email_table_save_card_cb):
change to EBookCallback signature, and unref the book.
(add_card_idle_cb): use addressbook_load_default_book, and call
the cb if it fails.
(e_address_popup_cleanup): fix type -- should be "pop->card =
NULL", not "pop = NULL".
(contact_editor_cb): change to EBookCallback signature.
(edit_contact_info_cb): use addressbook_load_default_book.
(start_query): change to EBookCallback signature.
(e_address_popup_query): use addressbook_load_default_book.
* gui/widgets/e-minicard-control.c (book_open_cb): change to
EBookCallback signature, and unref the book.
(save_in_addressbook): use addressbook_load_default_book instead
of e_book_use_local_address_book.
* gui/widgets/Makefile.am (INCLUDES): change includes since we're
including addressbook.h which has it's own set of funky include
path requirements.
2001-10-27 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-book.c (activate_factories_for_uri): Don't leak
stuff. (Bug #13709)
2001-10-27 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-destination.c (name_and_email_simple_query_cb,
nickname_simple_query_cb): Set book_uri when cardification occurs.
2001-10-27 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_add_section): Turned off use_ellipsis (it breaks
emulate_label_resize) and on emulate_label_resize. Fixes Ximian
bug #13693.
2001-10-27 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(make_match): Doh! We should be sorting our contacts so that the
most frequently used ones are at the top of the list, not the
bottom.
* backend/pas/pas-book.c (pas_book_check_queue): That should be a
bonobo_object_unref, not a gtk_object_unref.
(pas_book_queue_request): Likewise, we need to bonobo_object_ref
here.
(pas_book_destroy): If our pas_book_check_queue timeout is still
active, disable it. This should never happen, but it never hurts
to be careful.
(pas_book_destroy): Set book->priv to NULL after we free it.
2001-10-27 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (local_record_from_ecard): copy phone
labels and show phone as well, clear correct entry text and
correctly detect unsyncable cases
2001-10-27 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (local_record_from_ecard): touch the
record on lookup
(check_for_slow_setting): write touched only if we are doing a
slow sync
(card_removed): don't touch on lookup
(match): touch on lookup
2001-10-27 Jon Trowbridge <trow@ximian.com>
* backend/pas/pas-book.c (pas_book_check_queue): Added paranoid
reentrancy guards.
(pas_book_queue_request): Changed our idle handler into a timeout,
so as to work w/ reentrancy guards.
(pas_book_init): Explicit initialization.
2001-10-26 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.h: add prototypes for
addressbook_config_database, and addressbook_load_default_book.
* gui/component/addressbook.c (addressbook_config_database): new
function, so we aren't activating the db everywhere we need to use
it.
(addressbook_load_default_book): load the default book, after
getting the uri from bonobo-config.
2001-10-26 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-book-util.c (simple_query_card_added_cb): Return
on cancellation.
(simple_query_sequence_complete_cb): Act if not cancelled.
(simple_query_book_view_cb): Free & return on cancellation.
(e_book_simple_query_cancel): Set cancellation flag.
* gui/component/e-address-popup.c (e_address_popup_query): Hold a
reference to ourselves for the duration of our addressbook fetch.
(start_query): Release when we've fetched our addressbook.
(e_address_popup_cleanup): Break out most of what we do in
_destroy into a separate function.
(e_address_popup_destroy): Class cleanup.
(contact_editor_cb): Paranoid clean-up.
(add_contacts_cb): Paranoid clean-up.
(e_address_popup_ambiguous_email_add): Paranoid clean-up.
2001-10-26 JP Rosevear <jpr@ximian.com>
* conduit/e-address.conduit.in: remove the merges as valid sync
types
* conduit/address-conduit.c (pre_sync): write out only the touched
records if we are doing copies
* conduit/address-conduit-config.h
(addrconduit_load_configuration): get the sync type
2001-10-26 Jon Trowbridge <trow@ximian.com>
* gui/component/e-address-popup.c (e_address_popup_destroy):
Cancel any pending queries.
* gui/contact-editor/e-contact-editor.c (close_dialog): Don't
assert, but check if ce->app != NULL, since this function can
(apparently) get called multiple times.
* gui/contact-editor/e-contact-save-as.c (file_exists): Remove bad
dialog ref-counting crap.
* gui/contact-editor/e-contact-editor.c (save_card): Ref our
EContactEditor, since we are holding a pointer to it in
EditorCloseStruct.
(card_modified_cb): Unref our EContactEditor when we free our
EditorCloseStruct.
(card_added_cb): Unref our EContactEditor when we free our
EditorCloseStruct.
2001-10-26 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (check_for_slow_setting): make debug
info more accurate
2001-10-26 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (e_addr_context_destroy): prevent
double unref
(cursor_cb): correct typo
(card_removed): remove the card from the map if was archived and
is now deleted
2001-10-26 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.h: new member
* conduit/address-conduit.c (print_remote): free the struct after
using it
(e_addr_context_new): make consistent with other conduits
(e_addr_context_destroy): properly destroy the context
(cursor_cb): no need to ref the card, its done for us
(clear_entry_text): util function to free a field
(free_local): free a local record
(local_record_to_pilot_record): use a static buffer so we don't
have to free it later
(local_record_from_ecard): only fill in the fields we might not
sync, clear a field before replacing the contents
(for_each): track locals
(for_each_modified): ditto
(free_match): use free_local
2001-10-26 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-minicard.c, gui/widgets/e-minicard.h
(set_has_cursor): Added has_cursor argument. Setting the argument
to TRUE if the minicard doesn't have focus will grab the focus.
Fixes Ximian bug #3024.
2001-10-24 Jon Trowbridge <trow@ximian.com>
* gui/component/addressbook-factory.c (main): Initialize
gnome-vfs.
* gui/component/addressbook-component.c (xfer_file): Added.
(Copied from the calendar.)
(xfer_folder): Fixed to allow renaming of contact folders.
2001-10-24 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c
(e_addressbook_view_class_init): Removed key_press handler here
since delete and backspace are now handled by keybindings.
2001-10-23 Jon Trowbridge <trow@ximian.com>
* gui/component/addressbook.c: Fix command paths when we specify
our pixmaps, so we don't get a lot of totally useless & very ugly
bonobo-ui spew.
* backend/ebook/e-book-util.c (e_book_nickname_query): The empty
string as an arg shouldn't generate a warning.
* gui/component/select-names/e-select-names-completion.c: Removed
our cancelled flag and e_select_names_completion_cancel function,
since we were just duplicating stuff that had ended up in
ECompletion.
(match_name): Form our menu_text properly on an additional-name
match.
(e_select_names_completion_got_book_view_cb): Store handles for
our signals, disconnect them properly when we switch book views.
(e_select_names_completion_stop_query): Disconnect signals when we
stop our query.
(check_capabilities): Spew if we are using LDAP for completion.
(e_select_names_completion_destroy): Disconnect our signals when
we destroy.
This all should fix bug #10241.
2001-10-23 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_add_section): Set "draw_button" argument to TRUE
on this EEntry.
2001-10-22 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/e-contact-save-as.c (save_it): Put up an
error dialog if there's an error while saving. If the person hits
cancel on the "file exists" dialog, don't close the file selection
dialog. Fixes Ximian bug #7055.
2001-10-21 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c
(model_and_selection_free): right_click_up here when we let go of
the popup.
* gui/widgets/e-minicard-view.c (e_minicard_view_selection_event):
right_click_up here.
2001-10-21 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_add_section, e_select_names_set_default): Use an
EEntry here instead of a GtkLabel. Fixes Ximian bug #7067.
2001-10-21 Jon Trowbridge <trow@ximian.com>
* gui/component/addressbook.c (control_activate_cb): Call
e_addressbook_model_force_folder_bar_message when we activate the
component. (Fixes bug #11749)
* gui/widgets/e-addressbook-model.c
(e_addressbook_model_force_folder_bar_message): Added. Forces
emission of a folder_bar_message.
2001-10-20 Larry Ewing <lewing@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_set_default): stick with the style font if the
efont bold font does not exist.
(e_select_names_set_default): don't forget to unref the oldstyle.
2001-10-20 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(name_style_query): Fix memory leak.
* gui/widgets/e-addressbook-view.c (jump_to_letter): Free our
string vector letter_v when we are done with it.
* gui/contact-editor/e-contact-quick-add.c (edit_card): Unref our
QuickAdd structure.
* gui/component/e-address-popup.c (e_address_popup_construct):
Unref our style after we are done with it.
2001-10-20 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-book.c (activate_factories_for_uri): We
shouldn't leak the info returned by oaf_query.
* gui/contact-editor/e-contact-quick-add.c (card_added_cb): Remove
superfluous call to quick_add_unref.
(editor_closed_cb): Remove superfluous call to quick_add_unref.
* gui/component/select-names/e-select-names.c (esn_get_key_fn): We
need to unref the card returned by e_addressbook_model_get_card.
2001-10-20 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c: Make LDAP servers
non-user-creatable.
2001-10-20 Jon Trowbridge <trow@ximian.com>
* printing/e-contact-print.c (e_contact_print_card): Check that the
string we are checking for xml-ness is non-NULL.
* backend/ebook/e-destination.c (e_destination_importv): Filter
out empty destinations. (also Bug #13036)
* printing/e-contact-print.c (e_contact_build_style): Use
gnome_font_new_closest; if gnome_font_new fails and returns NULL,
our spacing gets all messed up. (Bug #10785)
* gui/widgets/e-addressbook-view.c (e_addressbook_view_can_print):
Allow printing if there are any cards in our view. The selection
has nothing to do with it.
* backend/ebook/e-destination.c (e_destination_is_empty): Check
for strings that contain non-whitespace, rather than just looking
for a non-zero first character. (Bug #13036)
2001-10-20 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-minicard-view.c (e_minicard_view_selection_event):
Handle focus_change in event by selecting that contact. Fixes
Ximian bug #3024.
* gui/component/addressbook-component.c (owner_unset_cb):
Repeatedly call gtk_main_quit here as long as there is a main loop
around. This is an ugly hack around Ximian bug #11760.
2001-10-20 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c: Added #include
<gal/widgets/e-unicode.h>.
* gui/widgets/e-minicard-control.c: Made this display the number
of extra cards in the attachment as well as made it save them all
to the local addressbook if the person selects the button. Fixes
Ximian bug #9507.
2001-10-20 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-minicard.c (e_minicard_event): Changed this to not
grab on a right click. Fixes Ximian bug #12660.
2001-10-19 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c
(destination_folder_handle_motion): Get @folder_type here too [to
match the changes in the EvolutionShellComponentDnd interface].
Also, remove a debugging message.
(destination_folder_handle_drop): Likewise.
2001-10-18 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c (add_menu_item):
Translate labels in select-names option menu. (Bug #9604)
* gui/search/e-addressbook-search-dialog.c
(e_addressbook_search_dialog_init): Made the default window size
slightly wider. (Bug #7516)
2001-10-18 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card.c, backend/ebook/e-card.h
(e_card_list_get_vcard): Made this take a const GList.
2001-10-18 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(check_capabilities): Added. Check if our book is local or
networked.
(e_select_names_completion_book_ready): Call check_capabilities.
(e_select_names_completion_new): Call check_capabilities.
(e_select_names_completion_do_query): If we have a networked book,
keep trying if we haven't been able to cache any cards --- our
earlier attempts could have failed due to too many matches. (Bug
#12932)
* gui/component/select-names/e-select-names-manager.c
(focus_out_cb): Lag our cardification on focus-out. This seems to
help with the unintended cardifications that can result from the
weird focus-out/focus-in events that get generated when the popup
disappears.
* backend/ebook/e-card-compare.c: Removed some debug spew.
2001-10-17 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c (addressbook_source_dialog):
grab focus in the Account entry when preparing the dialog, fixes
#10406.
2001-10-17 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names.c (new_folder): make
sure to also add "ldap-contacts" folders to the option menu.
2001-10-17 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (ecard_from_remote_record): sync all
the fields we can, with out overwriting
(local_record_from_ecard): write the fields to the pilot in
priority order unless there are fields on the pilot we can't
store, then fill in the fields as they are on the pilot
2001-10-17 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card.c (e_card_get_vobject): Did a bit of clean
up here. Might fix some crashes, specifically Ximian bug #10164.
* gui/widgets/e-addressbook-view.c (SPEC): Updated the model
column numbers here. Fixes Ximian bug #12308.
2001-10-17 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c (pas_backend_file_upgrade_db):
add upgrade from 0.1 to 0.2, where we make sure id dbt's match
vcard id's, fixes longstanding bug (#7406) where cards were not
modifiable or removable after having been created during a 1-2
week long window in early betas.
(PAS_BACKEND_FILE_VERSION): change to 0.2
(PAS_ID_PREFIX): #define this here.
(pas_backend_file_create_unique_id): use PAS_ID_PREFIX instead of
the string.
2001-10-16 Iain Holmes <iain@ximian.com>
* backend/ebook/evolution-ldif-importer.c (support_format_fn): Return
FALSE if no extension.
2001-10-16 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-card.c (e_card_get_id): If card->id is NULL,
return an empty string.
(e_card_set_id): Don't allow the card id to be set to NULL; use
the empty string instead.
(e_card_get_vobject): When building our vcard, pass in the empty
string as the id if card->id is NULL. (Bug #10164)
2001-10-16 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (local_record_from_ecard): don't set
the phone info if it is blank
(ecard_from_remote_record): save up to 3 fax numbers
2001-10-15 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_add_client):
unref the book after we pass it off to evolution-addressbook.
2001-10-15 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (create_card_dtor): unref
op->view.
(pas_backend_ldap_process_create_card): ref op->view.
(remove_card_dtor): unref op->view.
(pas_backend_ldap_process_remove_card): ref op->view.
(modify_card_dtor): unref op->view.
(pas_backend_ldap_process_modify_card): ref op->view.
(ldap_search_dtor): unref op->view.
(pas_backend_ldap_search): ref op->view.
2001-10-15 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_process_get_book_view): make sure to unref the
book_view here so we don't leak them.
2001-10-12 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-factory.c (main): call
e_passwords_init and e_passwords_shutdown.
2001-10-15 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card.c (addPropValueQP, addPropValueSets,
e_card_get_vobject): Properly decide whether a property needs to
be marked as QP by searching for '\n'. Fixes Ximian bug #3021.
2001-10-15 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/e-contact-save-as.c (e_contact_save_as,
e_contact_list_save_as): Set the default file name here. Fixes
Ximian bug #7053.
2001-10-14 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_hookup_shell_listeners): Added linebreaks to our
"this shouldn't happen" dialog message. (Bug #12498)
2001-10-12 Jon Trowbridge <trow@ximian.com>
* gui/component/addressbook-factory.c (main): Add a component name
to the e_passwords_init() call.
2001-10-12 Chris Toshok <toshok@ximian.com>
* backend/ebook/evolution-ldif-importer.c: commit the importer
originally from Michael M. Morrison, with fixups by toshok.
* backend/ebook/Makefile.am (bin_PROGRAMS): add
evolution-ldif-importer.
(oaf_in_files): add
GNOME_Evolution_Addressbook_LDIF_Importer.oaf.in.
* backend/ebook/e-card-simple.h: add WANTS_HTML and IS_LIST.
* backend/ebook/e-card-simple.c (field_data): add WANTS_HTML and
IS_LIST.
(e_card_simple_set): fix typo.
* backend/ebook/.cvsignore: ignore
GNOME_Evolution_Addressbook_LDIF_Importer.oaf and
evolution-ldif-importer.
* backend/ebook/GNOME_Evolution_Addressbook_LDIF_Importer.oaf.in:
ldif importer oafinfo.
2001-10-12 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
Added a boolean type here.
2001-10-12 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(addressbook_model_set_uri): Check to see if the uri we are
setting is the same as the current uri. If so, do nothing.
(Bug #11324)
2001-10-11 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-destination.c
(e_destination_reverting_is_a_good_idea): Added. Heuristic for
whether or not we want to revert to an earlier cardified state.
(e_destination_cardify): Don't be quite as aggressive about
reverting to previous cardified states. (Bug #11890)
2001-10-11 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.c (e_card_simple_destroy,
fill_in_info, e_card_simple_sync_card, e_card_simple_set_phone,
e_card_simple_set_address, e_card_simple_set_delivery_address,
file_as_get_style, file_as_set_style, e_card_simple_set,
e_card_simple_set_arbitrary),
gui/contact-editor/e-contact-editor-address.c
(e_contact_editor_address_destroy,
e_contact_editor_address_set_arg,
e_contact_editor_address_get_arg),
gui/contact-editor/e-contact-editor-fullname.c
(e_contact_editor_fullname_destroy,
e_contact_editor_fullname_set_arg,
e_contact_editor_fullname_get_arg),
gui/contact-editor/e-contact-editor.c (phone_entry_changed,
address_text_changed, name_entry_changed, full_name_clicked,
full_addr_clicked, fill_in_info): Changed these to use the new ref
and unref functions for ECard auxillary types.
* backend/ebook/e-card-simple.h: Added a comment.
* backend/ebook/e-card-types.h: Added ref_count field to all the
types.
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added ref and
unref functions here for all the ECard auxillary types. Removed
the corresponding free functions. Switched to using these
functions where appropriate.
* gui/component/addressbook-factory.c: #include
<e-util/e-passwords.h>
* gui/component/addressbook.c (load_uri_cb): const correctify.
* gui/component/select-names/e-select-names-manager.c,
gui/component/select-names/e-select-names.c: #include
<addressbook/gui/component/addressbook.h>
* gui/widgets/e-addressbook-model.c (modify_card): Removed an
unnecessary ref here.
2001-10-11 Dan Winship <danw@ximian.com>
* gui/component/select-names/e-select-names.c (update_folder):
Don't need this any more.
2001-10-11 Jon Trowbridge <trow@ximian.com>
* gui/component/addressbook.c (new_contact_cb): Check that
view->view != NULL.
(save_contact_cb): Check that view->view != NULL.
(search_cb): Check that view->view != NULL.
(delete_contact_cb): Check that view->view != NULL.
(print_cb): Check that view->view != NULL.
(print_preview_cb): Check that view->view != NULL.
(stop_loading_cb): Check that view->view != NULL.
(cut_contacts_cb): Check that view->view != NULL.
(copy_contacts_cb): Check that view->view != NULL.
(paste_contacts_cb): Check that view->view != NULL.
(select_all_contacts_cb): Check that view->view != NULL.
(send_contact_cb): Check that view->view != NULL.
(send_contact_to_cb): Check that view->view != NULL.
(update_command_state): Check that view->view != NULL. Hold a
reference to the AddressbookView for the duration of the function,
in case we exit during bonobo-reentrancy.
(addressbook_view_ref): Added.
(addressbook_view_unref): Added. Simple ref counting for
AddressbookView objects.
(addressbook_view_clear): Zero out an AddressbookView. This is
now separated from the deallocation of the AddressbookView object,
so that we don't leave a dangling pointer if we exit during
bonobo-reentrancy in update_command_state. (Which often seems to
happen if we exit while addressbook operations are going on.)
(destroy_callback): Replace previous call to addressbook_view_free
with addressbook_view_clear/addressbook_view_unref calls.
(addressbook_factory_new_control): Initialize the reference count
in the AddressbookView object.
* gui/widgets/e-addressbook-view.c (e_addressbook_view_destroy):
Carefully zero out our destroyed object.
(command_state_change): Hold a reference to ourselves during the
signal emission.
(get_selected_cards): Ref cards as we add them to the list.
(e_addressbook_view_stop): Check for view != NULL.
(e_addressbook_view_can_create): Check for view != NULL.
(e_addressbook_view_can_print): Check for view != NULL.
(e_addressbook_view_can_save_as): Check for view != NULL.
(e_addressbook_view_can_send): Check for view != NULL.
(e_addressbook_view_can_send_to): Check for view != NULL.
(e_addressbook_view_can_delete): Check for view != NULL.
(e_addressbook_view_can_cut): Check for view != NULL.
(e_addressbook_view_can_copy): Check for view != NULL.
(e_addressbook_view_can_paste): Check for view != NULL.
(e_addressbook_view_can_select_all): Check for view != NULL.
(e_addressbook_view_can_stop): Check for view != NULL.
* gui/widgets/e-addressbook-model.c (addressbook_destroy): Be
careful about zeroing out our destroyed object.
* backend/ebook/e-book-view.c (e_book_view_stop): Added. Stops
event processing in the underlying listener.
2001-10-10 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_destroy): If our select names dialog is
still around, destroy it. Otherwise, the dialog will hang around
after our composer goes away.
2001-10-06 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.glade: add an Email Address
field/label/help text.
* gui/component/addressbook-config.c
(addressbook_source_dialog_set_source): fill in the email entry
from the source. also, set the initial state of the email
label/entry.
(auth_checkbutton_changed): set the email label/entry
sensitive/editable if auth is turned on, and
insensitive/uneditable if it's off.
(addressbook_source_dialog_get_source): get the email address from
the email entry.
(addressbook_source_dialog): hook up the email entry to the
changed signal foo, as well as the focus handler for displaying
help text.
2001-10-06 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_new): db isn't a BonoboObject, so don't
bonobo_object_unref it!
2001-10-05 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names.c
(addressbook_model_set_uri): e_book_load_uri ->
addressbook_load_uri.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_new): e_book_load_uri ->
addressbook_load_uri.
* gui/component/addressbook.c (forget_passwords_cb): new function,
call e_passwords_forget_passwords.
(verbs): Add ContactsForgetPasswords.
(load_uri_auth_cb): new function, call the callback and free up
our closure stuff.
(load_uri_cb): once the uri is loaded, check if we're configured
to authenticate for it, and do so, using the e_passwords stuff.
(addressbook_load_uri): wrapper around e_book_load_uri. save off
the parameters and start the load-with-auth machinery.
(book_open_cb): remove all the auth stuff from here, as it's
handled elsewhere now.
* gui/component/addressbook-factory.c (main): call
e_passwords_init.
* gui/component/addressbook-component.c (user_create_new_item_cb):
e_book_load_uri -> addressbook_load_uri.
(destination_folder_handle_drop): same.
* gui/component/addressbook.h: add prototype for
addressbook_load_uri (a wrapper around e_book_load_uri that also
handles authentication if the user selects it.)
2001-10-05 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(real_add_address_cb): Check to make sure our call to
e_addressbook_model_get_card doesn't return NULL.
* gui/widgets/e-addressbook-model.c
(e_addressbook_model_get_card): Chek that we aren't requesting a
negative row.
* gui/contact-list-editor/e-contact-list-editor.c (add_email_cb):
Move to the bottom of the scrolled window, so we can see the
address we just added.
(table_drag_data_received_cb): Move to the bottom of the scrolled
window, so we can see the contact we just dropped.
* gui/component/addressbook.c (addressbook_factory_new_control):
We don't own the string returned by e_categories_master_list_nth,
so terrible things will happen if we free it. (Bug 10916)
2001-10-05 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-view.c (e_addressbook_view_set_arg):
don't set the editable field on the model - let the book do that.
(book_writable_cb): call writable_status to propagate a ui-change
event up (and sensitize the write-only toolbar buttons after you
authenticate with ldap.)
2001-10-04 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book.c (activate_factories_for_uri): for some
reason, matching on protocol is causing problems for me.
disabling it for now.
2001-10-04 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-component.c: use ldap.png for ldap
contacts.
2001-10-03 Iain Holmes <iain@ximian.com>
* addressbook/gui/component/addressbook-storage.c
(addressbook_storage_setup): Only load_storages if you have LDAP.
(load_source_data): Only do stuff if you have LDAP.
2001-10-03 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c (addressbook_height),
gui/widgets/e-minicard.c (remodel): Fixed these to determine the
fields to use properly.
2001-10-02 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(name_style_query): Strip out commas before forming our query.
(match_name): Use e_card_compare_name_to_string_full, rather
than our crufty old matching code. Not only is this cleaner,
but that crufty old code was very broken when it came to
handling strings with whitespace. (Bug 8988)
(match_nickname): utf8 and bug fixes.
* backend/ebook/e-card-compare.c
(e_card_compare_name_to_string_full): Added. This is basically
e_card_compare_name_to_string with a bunch of extra options, so
that it can more readily be reused in other contexts.
(e_card_compare_name_to_string): This is now just a call to
e_card_compare_name_to_string_full with the extra args filled in
to defaults that simulate the old behavior.
2001-10-02 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book.c (e_book_construct): remove most of the
oaf stuff from here. we do it in load_uri, where we'll have more
information (namely, the protocol we're using.)
(activate_factories_for_uri): do an oaf query to get a list of all
objects implementing our BookFactory interface and also supporting
the protocol used in the uri.
(e_book_load_uri): try activating book factories to handle this
uri, and start the iteration over the list.
(e_book_load_uri_from_factory): try and load the uri.
(e_book_load_uri_open_cb): callback function for the
BookFactory_openBook call - if it succeeds, call the user's
callback. otherwise step to the next factory.
(e_book_load_uri_step): go to the next factory in our list, and
error out if there are no more.
2001-10-02 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_get_textification): Made the max length of
the textification be 2047 characters. Fixes Ximian bug #3021.
2001-10-01 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (ecard_from_remote_record): if there
was no first name or last name, file as the company.
2001-10-01 JP Rosevear <jpr@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_changes_foreach_key): if there is a db error,
assume deletion
(pas_backend_file_changes): write after all is done for efficiency
2001-09-28 JP Rosevear <jpr@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_changes_foreach_key): g_strdup
(pas_backend_file_changes): ditto, make sure to free all data and
do a hash write after each add/remove
* conduit/address-conduit.c (local_record_to_pilot_record): use
the local record category
(local_record_from_ecard): ndle the fields and category we don't
sync by making sure we don't overwrite them
2001-09-27 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book.c (e_book_construct): do an oaf query to
get a list of all objects implementing our BookFactory interface,
instead of just activating the one IID. this should really be a
global list, not a per EBook.
(e_book_load_uri): start the iteration over our list of
BookFactory's.
(e_book_load_uri_from_factory): try and load the uri.
(e_book_load_uri_open_cb): callback function for the
BookFactory_openBook call - if it succeeds, call the user's
callback. otherwise step to the next factory.
(e_book_load_uri_step): go to the next factory in our list, and
error out if there are no more.
2001-09-27 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (local_record_from_ecard): use the old
record (if there was one) so as not to overwrite fields we don't
sync
(pre_sync): store the dbi in the context and don't make it object
data
2001-09-26 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-book-factory.c (pas_book_factory_destroy): use
priv->iid instead of the hardcoded string here.
(pas_book_factory_activate): parameterize the factory's iid, as in
the calendar server, and provide a default if iid == NULL.
* backend/pas/pas-book-factory.h: add iid parameter for
pas_book_factory_activate.
2001-09-26 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-destination.c (e_destination_get_textrep): Use
camel_address_format, not camel_address_encode.
2001-09-26 Anna Marie Dirks <anna@ximian.com>
* gui/contact-editor/contact-editor.glade: Added help text (thanks
to Aaron) and re-worded the labels, and fixed the shortcuts on the
brand-spanking-new Collaboration tab.
2001-09-26 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names-manager.h: add
completion_book.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_new): get /Addressbook/Completion/uri, and
if it's present, use the corresponding EBook for completing
addresses.
(focus_out_cb): use manager->completion_book here instead of NULL,
which corresponds to the local addressbook.
(completion_popup_cb): same.
(e_select_names_manager_create_entry): same.
2001-09-26 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-card-compare.c (e_card_compare_name_to_string):
Properly handle names when the individual elements (given,
addition, family) contain whitespace. (Bug #10502)
* backend/ebook/e-destination.c (e_destination_set_name): Reset
textrep when we change the name.
(e_destination_set_email): Reset textrep when we change the email.
(e_destination_get_textrep): Make sure that the textrep version of
the address is properly quoted if it contains unsafe characters.
(All related to bug #10796)
* gui/component/select-names/e-select-names-completion.c
(match_nickname): Fix nickname matching. (bug #9698)
(make_match): Use e_completion_match_new when building our match,
rather than ad hoc manipulation of the struct.
2001-09-26 JP Rosevear <jpr@ximian.com>
* backend/pas/pas-backend-file.c (pas_backend_file_changes): set
the last_use and use_score fields of the card to known values so
the card doesn't register as changed when only they have changed
2001-09-26 Peter Williams <peterw@ximian.com>
* conduit/address-conduit.c (ecard_from_remote_record): Fix this function
to set email addresses properly, and handle multiple occurrences of
email addresses, home phone numbers, and business phone numbers.
2001-09-25 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook-component.c (user_create_new_item_cb):
Handle creating the new contact in the current folder if it's a
contacts folder. Fixes Ximian bug #7814.
2001-09-24 Chris Toshok <toshok@ximian.com>
* backend/pas/Makefile.am (LDAP_SCHEMA): add
evolutionperson.schema
(EXTRA_DIST): add LDAP_SCHEMA to the dist (but don't install it).
2001-09-23 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (ecard_from_remote_record): sync the
note the to pilot and make sure to blank fields when appropriate
(local_record_from_ecard): sync the note to the desktop
2001-09-22 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c (do_create): g_free (id) in the
error case to plug a memory leak.
2001-09-22 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard.c (remodel): when creating the cards,
don't display any of the subname fields (surname, given, middle,
suffix, etc.)
2001-09-22 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-card-simple.c
(e_card_simple_get): add getters for the additional name fields.
(field_data): move FAMILY_NAME to the end of the list, and add
GIVEN_NAME, ADDITIONAL_NAME (middle name), and NAME_SUFFIX.
* backend/ebook/e-card-simple.h: same.
2001-09-21 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook.c (print_preview_cb): Hooked up print
preview button.
* gui/widgets/e-addressbook-view.c,
gui/widgets/e-addressbook-view.h
(e_addressbook_view_print_preview): Added this function.
* printing/e-contact-print.c, printing/e-contact-print.h
(e_contact_print_preview): Added this function.
2001-09-19 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-destination.c (name_and_email_simple_query_cb):
Use the default e-mail address if we have nothing else to go on.
Previously we just failed, which basically meant that name-only
searches would never work properly.
(nickname_simple_query_cb): The logic was a bit tangled here; if
our query status isn't SUCCESS, always give up but don't leak the
destination. And if our nickname query fails and we try the
name-and-email query, use the textrep for a name-only search. The
only reason we are doing a nickname query in the first place is if
we have an obviously invalid e-mail.
(launch_cardify_query): Use e_destination_is_valid to determine
if we should try a nickname query first.
These changes basically fix bug 7728, and generally make the
auto-cardification of addresses a lot more clever and robust.
* backend/ebook/e-book-util.c (name_and_email_cb): Use
e_card_compare_name_to_string instead of e_card_name_match_string.
(e_book_name_and_email_query): The arguments to g_strsplit were
in the wrong order. Doh!
* backend/ebook/e-card-compare.c (e_card_compare_name_to_string):
Added. Replaces e_card_name_match_string, and actually works.
* backend/ebook/e-card.c: Removed e_card_name_match_string
function, which didn't work particularly well.
2001-09-19 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (cursor_cb): don't add to the complete
list of cards if the card is a list
(card_added): don't add to the list of changes if the card is a
list
(card_changed): ditto
(card_removed): ditto
2001-09-19 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_hookup_shell_listeners): Change the "this should
never happen" message into a request for people to e-mail me
directly with info if they encounter that error.
* backend/ebook/e-book-util.c (e_book_name_and_email_query):
Freeing name[i] instead of namev[i] is a bad idea. (bug #10270)
* gui/component/select-names/e-select-names-popup.c
(popup_menu_card): Properly handle our GnomeUIInfo labels so that
they won't be leaked if they are dynamic strings, so that they
will be i18n-correct, and so that underscores won't be interpreted
as key accelerators. What a PITA. Also, don't leak our
iterators. (Bug #10200.)
(popup_menu_list): The same GnomeUIInfo tweaking as in
popup_menu_card.
(popup_menu_nocard): Ditto.
2001-09-18 JP Rosevear <jpr@ximian.com>
* backend/ebook/e-card-simple.c (field_data): add caluri field data
* backend/ebook/e-card.c (e_card_get_vobject): add the caluri
property when appropriate
(parse_caluri): handle read caluri
(e_card_class_init): add caluri arg
(e_card_destroy): free the caluri
(e_card_get_arg): return caluri arg
(e_card_set_arg): set caluri from arg
(e_card_init): init caluri to null
* backend/ebook/e-card-simple.h: new simple field
* backend/ebook/e-card.h: new member
* gui/contact-editor/e-contact-editor.c (field_changed): util
callback to change the command state
(set_entry_changed_signal_field): hook up a change signal to above
(set_entry_changed_signals): use above function
* gui/contact-editor/e-contact-editor.glade: Add collaboration
page and fields
2001-09-18 JP Rosevear <jpr@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_build_cards_list): create a sexp and check if
the cards match before adding them to the list
(pas_backend_file_process_get_cursor): send extra param
2001-09-18 Larry Ewing <lewing@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(book_query_process_card_list): unref the destination regardless
of whether we get an email addresss.
2001-09-17 Larry Ewing <lewing@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(name_style_query): use g_strfreev.
(match_name): s/g_free/g_strfreev.
(match_file_as): s/g_free/g_strfreev.
* backend/ebook/e-book-util.c (e_book_name_and_email_query): fix
the memory handling here. All there members of the vector need to
be freed all the time.
* backend/ebook/load-pine-addressbook.c (parse_line): free the
string outside of the test that makes sure there are three
entries.
* gui/component/select-names/e-select-names-completion.c
(match_nickname): don't malloc a match we will never use.
* gui/widgets/e-addressbook-model.c (get_view): free the dup'd
capabilities.
2001-09-17 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-destination.c (e_destination_is_valid): We want
to assume that a destination that comes from a card is
automatically valid, but the right way to check that is by calling
e_destination_from_card, not by checking if dest->priv->card !=
NULL. (Fixed bug #10017)
* gui/component/select-names/e-select-names-completion.c
(match_name): Fixed a stupid bug was causing completion to fail
for contacts who have only one name. (The classic example we all
know and love is 'George <jirka@5z.com>') (bug #8353)
* backend/ebook/e-card.c (e_card_list_send): Do the right thing if
the card we are trying to send to has no valid e-mail addresses.
(bug #10137)
* gui/widgets/e-minicard.c (e_minicard_event): Code implicitly
assumed that event->button.button is 1, 2, or 3, causing disaster
when using a wheel-mouse. Fixed. (bug #9400)
2001-09-16 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor.c (_phone_arrow_pressed):
use enable_widget instead of gtk_widget_set_sensitive.
(_email_arrow_pressed): same.
(_address_arrow_pressed): same.
(disable_widget_foreach): same.
(enable_writable_fields): same.
(set_editable): same.
(enable_widget): new function, using both gtk_widget_set_sensitive
and *_set_editable to allow the user to select text in GtkEntry's
and GtkText's.
* gui/contact-editor/e-contact-editor-fullname.c
(e_contact_editor_fullname_set_arg): use set_editable as well as
set_sensitive, to allow the user to select text in GtkEntry's.
* gui/contact-editor/e-contact-editor-address.c
(e_contact_editor_address_set_arg): same.
2001-09-16 Chris Toshok <toshok@ximian.com>
* backend/pas/evolutionperson.schema: fix syntax errors (which are
broken, imo...)
2001-09-16 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-storage.h: reorder the LDAP scopes so
that they match the order of the option menus in the glade file.
* gui/component/addressbook-config.c (auth_checkbutton_changed):
new function, mostly there to house some #ifdef'ed out code.
(option_menuitem_activated): new function, to keep track of
changes to the ldap scope optionmenu.
(addressbook_source_dialog_set_source): set the menu history as
well as the dialog's copy of the scope.
(addressbook_source_dialog_get_source): fill in the source's scope
from the dialog's copy, and add more #if the_ui_gods_smile_on_me
code.
(add_activate_cb): new function, add an activate callback for the
optionmenu's items.
(addressbook_source_dialog): more #if the_ui_gods_smile_on_me
code, always start the dialog on page 0, and hook up the
scope optionmenu's items.
2001-09-15 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-card-compare.c (e_card_compare_name): No
loose name matches on family names. (#8802)
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_activate_obj): We can't use NULL as the
first arg for e_addressbook_show_contact_editor anymore. Damn.
(#8535)
* backend/ebook/e-book-listener.c (e_book_listener_stop): Make
"stop" do nothing but set the stopped flag, as in
e-book-view-listener.c.
(e_book_listener_destroy): Clean up our queue here, rather than in
e_book_listener_stop.
(response_free): Added. Move the rather lengthy bit of code
needed to free a EBookListenerResponse into one place.
(e_book_listener_check_queue): Properly deal with the stopped
flag.
(e_book_listener_queue_response): If the stopped flag is set, just
drop the incoming response.
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_stop): Make "stop" do nothing but set the
stopped flag.
(e_book_view_listener_destroy): Move all of the clean-up that used
to be in e_book_view_listener_stop here. This considerably simplifies
the logic required to avoid various race conditions.
(e_book_view_listener_check_queue): Properly deal with the stopped flag.
(e_book_view_listener_queue_response): Drop all incoming responses if
we are stopped.
2001-09-14 Jon Trowbridge <trow@ximian.com>
* backend/pas/pas-book.c (pas_book_queue_request): Hold a
reference to the book on behalf of our idle function.
(pas_book_check_queue): When we are finished, drop the reference
we've been holding on behalf of the idle function.
* backend/pas/pas-backend-file.c
(pas_backend_file_process_create_card): Hold a reference to the
book_view while sending our notifications.
(pas_backend_file_process_remove_card): Hold a reference to the
book_view while sending our notifications.
* gui/contact-editor/e-contact-quick-add.c (quick_add_unref): Remove
debugging spew.
* backend/ebook/e-book-util.c: Remove a lot of unused code that
worked around bugs that have long since been fixed.
(simple_query_disconnect): Added. Breaks out the part of
simple_query_free that disconnect signals.
(simple_query_free): Replace code w/ a call to
simple_query_disconnect.
(simple_query_sequence_complete_cb): Call simple_query_disconnect
before executing the callback, so that our callbacks don't get
triggered by any book changes that might occur during that
callback.
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_check_queue): Changed to be consistent with
e_book_listener_check_queue.
(e_book_view_listener_queue_response): Also changed to use a
high-frequency timeout.
* backend/ebook/e-book-listener.c (e_book_listener_check_queue):
OK, I've agonized over this stupid little function, and it should
now be race-free.
(e_book_listener_queue_response): We process our response queue in
a high-frequency timeout rather than an idle. Using an idle
function leads to some tricky race conditions and bad interactions
with bonobo's semi-broken attempts to take over event processing.
(e_book_view_listener_stop): Manually disable our timeout and
clean up.
2001-09-14 Ettore Perazzoli <ettore@ximian.com>
[Automake 1.5 fixes pointed out by Richard Boulton
<richard@tartarus.org>, as per #9258.]
* gui/component/select-names/Makefile.am: Set CLEANFILES directly
instead of using `+='.
* backend/pas/Makefile.am: Rename `LDAP_BACKEND_SOURCES' to
`LDAP_BACKEND_FILES'.
* backend/ebook/Makefile.am: Set CLEANFILES directly instead of
using `+='.
2001-09-13 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_connect): use
ldap_init. ldap_open is deprecated in openldap 2.x.
2001-09-12 Iain Holmes <iain@ximian.com>
* backends/ebook/evolution-vcard-importer.c (check_file_is_vcard):
Fix the check.
2001-09-12 Larry Ewing <lewing@ximian.com>
* backend/ebook/e-destination.c: free the values that are being
leaked here.
2001-09-12 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c (match_email):
printf arguments were reversed by mistake. Fixed bug #9693.
2001-09-09 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-popup.c
(popup_menu_list): Added. Treat right-clicks on a contact list as
a special case.
(e_select_names_popup): Check if we are dealing with a contact
list.
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_check_queue): See
e_book_listener_check_queue below.
(e_book_view_listener_queue_response): See
e_book_listener_queue_response below.
* backend/ebook/e-book-listener.c (e_book_listener_check_queue):
Explicitly prohibit reentrancy. Use gtk-unref rather than
bobobo-unref.
(e_book_listener_queue_response): Hold a gtk-ref to the listener
while the idle function runs, not a bonobo-ref. As far as I can
tell, it is impossible to avoid a race condition here when we have
to worry about bonobo reentrancy.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_insert_length): Alter a copy of the
original EDestination, rather than just using a new one. We need
to do this to preserve prior-card information for possible
reversion later.
(e_select_names_text_model_delete): Ditto.
* backend/ebook/e-destination.c (e_destination_clear_card): When
clearing a destination where ->card != NULL, store it for possible
reversion later.
(e_destination_revert): If we have an old card stored, go back to
using it for the destination.
(e_destination_is_valid): Tries to detect obviously broken
addresses.
(e_destination_cardify): If our destination is invalid, first try
to cardify simply by reverting to an older card.
(e_destination_destroy): Unref any cached old card.
(e_destination_copy): Copy the old card information.
2001-09-07 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(sync_table_and_models): Show all rows in the table, and then
remove the rows that correspond to entries in the
ESelectNamesModels in the children.
(real_add_address): Freeze/thaw our ESelectNamesModel, so that we
don't change our table while we are in the middle of iterating
over the selection.
(remove_address): Just delete the address from the
ESelectNamesModel, the signal handler will do the rest.
(selected_rows_foreach_cb): Call remove_address to do our dirty
work.
(e_select_names_add_section): Connect to the 'changed' signal from
the ESelectNamesModel, and call sync_table_and_models explicitly to
get our initial state correct.
* gui/component/select-names/e-select-names-table-model.c
(fill_in_info): Deal with EDestinations in our table that don't
come from cards.
* gui/component/select-names/e-select-names-manager.c: Added
another ESelectNamesModel* to the ESelectNamesManagerSection
struct. Called 'original_model', this contains a copy of the
model as it is when we begin using the SelectNames dialog.
(section_copy): Copy the original model.
(section_free): Free the original model.
(e_select_names_manager_add_section_with_limit): Initialize the
original model.
(e_select_names_clicked): I've changed the semantics of this
dialog quite a bit... no UI freeze can stop me! If OK is clicked,
we do nothing. If Cancel is clicked, we revert to the
'original_model' copy of our address entry state before we started
editting. Finally, we close the dialog before any of thing. Doing
it last caused problems, because signals were being triggered
which had dangling pointers as their closures.
(e_select_names_manager_activate_dialog): Copy our current state
to the original model, and share the same ESelectNamesModel
between the dialog and the address entry in the composer..
(e_select_names_manager_get_cards): Removed. It had been
#if 0/#endif-ed out for a while.
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_freeze): Added.
(e_select_names_model_thaw): Added.
(e_select_names_model_uncardify): Added. If possible,
"uncardifies" a specific model entry.
(e_select_names_model_changed): Changed to pay attention
to the freeze count.
* gui/component/select-names/e-select-names-completion.c
(clean_query_text): Strip leading/trailing whitespace from
queries.
* backend/ebook/e-destination.c (e_destination_uncardify): Added.
Converts a card-associated destination into a text-associated
destination w/ the e-mail address.
(e_destination_list_to_vector): Added. A convenience routine.
(e_destination_freev): Added. A convenience routine.
(e_destination_touchv): Added. I'm lazy.
2001-09-08 Chris Toshok <toshok@ximian.com>
(make_contact_editor_cb): show the right contact editor (the list
editor for list cards).
2001-09-08 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names-popup.c
(popup_menu_card): do the EDestination xml magic on email
addresses we put in the popup.
2001-08-27 Zbigniew Chyla <cyba@gnome.pl>
* gui/component/addressbook.c (addressbook_factory_new_control):
For every category:
- set .translate to FALSE (e_categories_master_list_nth returns
translated category name)
- convert category name in UTF-8 to locale's encoding
2001-08-23 Zbigniew Chyla <cyba@gnome.pl>
* gui/component/select-names/e-select-names-popup.c
(popup_menu_card): Fixed two bugs:
- missing coversion of contact name to GTK+ locale,
- passing dynamically created string (contact name) inside uiinfo struct
to gnome-app-helper functions.
Remember: these functions may change strings, trying to translate them!
(popup_menu_nocard): Ditto
2001-09-07 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook-component.c: Removed unused factory
variable.
2001-09-06 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-storage.c (notify_listener): new
function, notify the bonobo listener.
(remove_ldap_folder): track change to EvolutionStorage signal.
(create_ldap_folder): same, and make sure the type is
"ldap-contacts".
(load_source_data): folders that we create should have
"ldap-contacts" as their type.
(addressbook_storage_add_source): same.
* gui/component/addressbook-component.c: (folder_types): add
"ldap-contacts", for display of ldap servers (they get their own
icon, and their own name in the Create New Folder dialog.
(create_view): use IS_CONTACT_TYPE since we support two folder
types now.
(create_folder): same.
(remove_folder): same.
(xfer_folder): same.
2001-09-06 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor.c: (pixmaps): change
/Toolbar/ContactEditorSave to /Toolbar/ContactEditorSaveClose.
2001-09-06 Chris Toshok <toshok@ximian.com>
* gui/component/Makefile.am (INCLUDES): add -DEVOLUTION_IMAGESDIR.
* gui/widgets/e-addressbook-view.c (card_deleted_cb): remove
status messages from here.
(e_addressbook_view_delete_selection): same.
* gui/widgets/e-addressbook-model.c (sequence_complete): emit a
NULL status message along with the stop_state_changed. The null
status message will clear the status bar for this view.
* gui/component/addressbook.c (set_status_message): use the
EvolutionActivityClient stuff.
* backend/pas/pas-backend-ldap.c (view_destroy): remove status
message for abandoning a search.
(ldap_op_process_current): wrap status messages in _().
(ldap_op_process): same.
(create_card_handler): same, and remove the notify_status for ""
and add a notify_complete call after the card is added.
(remove_card_handler): same.
(modify_card_handler): same.
(poll_ldap): wrap status messages with _(), and remove the "Search
Complete" message.
(ldap_search_handler): wrap status message.
* backend/pas/pas-backend-file.c (pas_backend_file_search): use
_() on status messages, and make sure the last notify_* called is
notify_complete.
2001-09-05 Ettore Perazzoli <ettore@ximian.com>
[Fix #958, ShellComponents should not be created by factories, for
the addressbook.]
* gui/component/addressbook-component.c
(GNOME_EVOLUTION_ADDRESSBOOK_COMPONENT_FACTORY_ID): Removed.
(GNOME_EVOLUTION_ADDRESSBOOK_COMPONENT_ID): New.
(create_component): Renamed from `factory_fn'. Just register the
thing on OAF.
(addressbook_component_factory_init): Just call it.
* gui/component/GNOME_Evolution_Addressbook.oaf.in: Remove the
ShellComponentFactory.
2001-09-04 Iain Holmes <iain@ximian.com>
* backend/ebook/evolution-vcard-importer.c (load_file_fn): Return FALSE
if the file isn't a valid VCard file.
2001-08-05 Zbigniew Chyla <cyba@gnome.pl>
I18n fixes (mainly making buttons on the right side less Anglocentric :-)
* backend/ebook/e-card-simple.c
(field_data): Marked "name" and "short_name" fields for translation.
(e_card_simple_get_name, e_card_simple_get_short_name): Return
localized version of the name (using U_() macro).
* gui/contact-editor/e-contact-editor.c (set_entry_changed_signals):
Connect "changed" signal from "entry-web" entry to widget_changed.
(changing this field wasn't making "Save and Close" button sensitive)
* gui/widgets/Makefile.am (glade_DATA): Removed alphabet.glade.
* gui/widgets/e-addressbook-view.c
(button_labels, button_letters): New strings containing a list of
labels and "values" of all buttons placed on the right side of the
addressbook view (intended for localization).
(struct LetterClosure): Changed the type of letter field to gunichar.
(e_utf8_split): New function, similar to g_strsplit, but operates on
UTF-8 strings.
(jump_to_letter): Don't hardcode letters, build queries dynamically
using UTF-8 and localized letters stored in button_letters.
(connect_button): Removed.
(create_alphabet): Don't use glade file, build buttons manually using
(localized) labels from button_labels. Use (localized) values from
button_letters when creating LetterClosure.
* gui/widgets/e-minicard-view-widget.[ch]
(e_minicard_view_widget_jump_to_letter): Changed the type of the
second argument from char to gunichar.
* gui/widgets/e-minicard-view.c
(compare_to_utf_str): Renamed from compare_to_letter, now operates on
UTF-8 string.
(e_minicard_view_jump_to_letter): Changed the type of the second
argument from char to gunichar + conversion to UTF-8 string.
* gui/widgets/e-minicard-view.h
(e_minicard_view_jump_to_letter): Changed the type of the second
argument from char to gunichar.
2001-09-02 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book.c (e_book_add_card, e_book_commit_card),
backend/pas/pas-backend-file.c (do_create),
backend/pas/pas-backend-ldap.c
(create_card_handler, remove_card_handler, modify_card_handler,
pas_backend_ldap_process_get_vcard, poll_ldap): Use
e_card_get_vcard_assume_utf8 instead of e_card_get_vcard here
since all internal communications and database storage are assumed
to be utf8.
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h
(e_card_simple_duplicate): Simplified this function considerably.
(e_card_simple_get_vcard_assume_utf8): Added this function.
* backend/ebook/e-card.c, backend/ebook/e-card.h (e_card_new,
e_card_load_cards_from_file, e_card_load_cards_from_string): Made
these functions pay attention to charset attributes.
(e_card_new_with_default_charset,
e_card_load_cards_from_file_with_default_charset,
e_card_load_cards_from_string_with_default_charset): New functions
that let you change the default charset from UTF-8.
(e_card_get_vcard): Made this write out charset attributes when
necessary.
(e_card_get_vcard_assume_utf8): New function that writes out a
card without writing out charset attributes.
* backend/ebook/evolution-vcard-importer.c (book_open_cb),
backend/ebook/load-gnomecard-addressbook.c (book_open_cb),
backend/ebook/test-card.c (main),
gui/component/addressbook-component.c
(destination_folder_handle_drop), gui/contact-editor/test-editor.c
(main), gui/contact-list-editor/e-contact-list-editor.c
(table_drag_data_received_cb), gui/widgets/e-addressbook-view.c
(selection_received), gui/widgets/e-minicard-control.c
(pstream_load): Changed the default charset to be used here to
ISO-8859-1.
* backend/ebook/load-gnomecard-addressbook.c (add_card_cb),
backend/ebook/load-pine-addressbook.c (add_card_cb),
backend/ebook/test-client-list.c (get_cursor_cb),
backend/ebook/test-client.c (get_cursor_cb, get_card_cb): Use
e_card_get_vcard_assume_utf8 to print out testing strings.
* gui/component/select-names/e-select-names-model.c,
gui/component/select-names/e-select-names-model.h
(e_select_names_model_contains): Changed this to be const
EDestination *dest to fix a warning.
* gui/contact-editor/e-contact-editor.c (e_contact_editor_init):
Translate window title here.
2001-08-31 Zbigniew Chyla <cyba@gnome.pl>
* gui/component/addressbook-storage.c
(addressbook_get_other_contact_storage): s/_/U_/
* gui/widgets/e-addressbook-reflow-adapter.c (addressbook_compare):
Use g_utf8_collate.
* gui/widgets/e-minicard.c (e_minicard_compare):
Ditto.
* printing/e-contact-print.c (card_compare):
Ditto.
2001-08-29 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-manager.c
(e_select_names_clicked): Use e_select_names_model_merge to
combine the selected names with any existing ones. This causes
you to not lose addresses typed directly into the entry while the
SelectNames dialog is up. (Bug #8058)
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_merge): Merge the contents of one
ESelectNamesModel into another, avoiding duplicates.
* backend/ebook/e-destination.c (e_destination_equal): Added.
Determines if two destinations appear to refer to the same
recipient.
* backend/ebook/e-card.c (e_card_list_send): Added cast to
g_free args to silence compiler warnings.
* gui/contact-editor/e-contact-quick-add.c (quick_add_set_name):
Paranoia. Check that name != qa->name.
(quick_add_set_email): Check that email != qa->email.
(ce_have_book): Store the QuickAdd data structure in object data,
so that we can be extra-careful and avoid having a dangling
pointer floating around out somewhere as the closure for a signal.
Fixes bug #8155, I think.
(card_added_cb): Clear object data to ensure single unref.
(editor_closed_cb): Clear object data to ensure single unref.
* gui/component/select-names/e-select-names-completion.c
(book_query_score): Make sure that comp->priv->query_text isn't
NULL. (Fixes bug #8195)
* backend/ebook/e-book-listener.c (e_book_listener_check_queue):
This function can be re-entrant during the signal emission; Added
extra ref/unrefs and checks to avoid problems if this happens.
This is similar to my recent changes to
e_book_view_listener_check_queue. (Fixes bug #7400)
2001-08-27 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c: Get rid of a warning by
initializing the closing NULL element in folder_types correctly.
* gui/component/select-names/e-select-names.c: Updated to match
the studlyCapsification of attributes in shell/Evolution*.idl.
2001-08-27 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(sexp_file_as): Added. Generated queries against file_as.
(match_file_as): Added. Match results of queries against
file_as. (Bug #8152)
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_check_queue): Added ref/unref pair to make
sure that our listener doesn't get finalized during the signal
emission and leave us with a dangling pointer. (Bug #7661)
* backend/ebook/e-card.c (e_card_list_send): Removed some debugging
spew that I left in by mistake.
* gui/widgets/e-addressbook-model.c (create_card): Removed debugging
spew.
* backend/ebook/e-card.c (e_card_list_send): Do the right thing if
the card we are trying to send to is a contact list. (Bug #6580)
2001-08-27 Zbigniew Chyla <cyba@gnome.pl>
* gui/widgets/e-addressbook-util.c (e_addressbook_error_dialog):
Display localized status string (added missing _()).
2001-08-24 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-destination.c (e_destination_set_card): Put a
freeze/thaw around our the set of operations that changes the
internal state of our card, so 'changed' signal callbacks won't be
invoked on a card in an intermediary state. This fixes the bug
that was causing the e-mail addresses in cards to be blank when
replying to a message. (An unexpected side-effect of toshok's
change on 8/22 to make sure that priv->email != NULL).
(e_destination_get_name): Code slightly rearranged for (IMO)
clarity.
2001-08-23 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard.c (e_minicard_event): add
BUTTON_PRESS_MASK so double clicks still work.
2001-08-23 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (addressbook_query_changed): switch
"full_name" to "x-evolution-any-field" in all the queries where we
want to match all cards, since the backends universally handle
this special case more efficiently.
2001-08-22 Jon Trowbridge <trow@ximian.com>
* gui/contact-list-editor/e-contact-list-editor.c (extract_info):
In the GUI, the toggle is labelled "hide addresses", not "show
addresses" -- so we have to reverse the boolean value we read in.
(fill_in_info): Same bug as before: since the GUI reads "hide", we
have to initialize the toggle to '!show_addresses', not
'show_addresses'.
* backend/ebook/e-destination.c
(e_destination_list_show_addresses): Added.
(e_destination_xml_encode): Encode the value of
e_destination_list_show_addresses into the XML.
(e_destination_xml_decode): Read and store the "show_addresses"
flag.
2001-08-22 jacob berkman <jacob@ximian.com>
* gui/component/e-address-popup.c (emit_event): emit an event from
our event source
(contact_editor_cb): emit a destroy event so our control frame can
be destroyed.
(edit_contact_info_cb): emit a hide event so our control frame can
be hidden
(e_address_popup_cardify):
(add_contacts_cb): emit the destroy event
(e_address_popup_factory_new_control): don't unref our object at
widget destroy time as that was really really broken
(e_address_popup_factory_new_control): create an event source and
aggregate ourself with it
* gui/contact-editor/e-contact-editor.c (enable_writable_fields):
display a nicer warning when we can't find a widget for a given
field
(e_contact_editor_raise): only raise if there is a window
* gui/contact-editor/contact-editor.glade: name some widgets that
got unnamed, and set the first entry as defaultable
* gui/contact-editor/e-contact-editor.c: envelope printing is
disabled in 1.0
2001-08-22 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-destination.c (e_destination_get_email): make
sure we don't get into a situation where priv->email == NULL.
2001-08-21 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard.c (e_minicard_event): if we're dragging,
drag_button_down won't be true in the BUTTON_RELEASE case, since
we set it to false in MOTION_NOTIFY once the threshold is reached.
(e_minicard_drag_end): remove this function, since it was needed
to work around a bug in gnome-canvas.
2001-08-20 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(e_addressbook_create_ebook_table): Wrap our addressbook table
adapter in an ETableWithout, so that we can make addresses appear
and disappear when we remove/add them to the section lists
(To/Cc/Bcc) on the right of the dialog.
(real_add_address_cb): When we add an address, hide it in the main
list.
(e_select_names_init): Get pointer to our without table from the
table's object data, and store it.
(remove_address): When we remove an address, show it in the main
list.
(card_key): Added. Allocate a unique key from an ECard.
(esn_get_key_fn): Added. Callback for ETableWithout.
(esn_dup_key_fn): Added. Callback for ETableWithout.
(esn_free_gotten_key_fn): Added. Callback for ETableWithout.
(esn_free_duped_key_fn): Added. Callback for ETableWithout.
* backend/ebook/e-card-simple.c (e_card_simple_get): Changed
E_CARD_SIMPLE_FIELD_NAME_OR_ORG to first try the FILE_AS
type. This allows the cards in the ESelectName dialog to
appear in proper sort order (i.e. as 'Doe, John' rather than
'John Doe'). Fixes ximian #6002.
2001-08-20 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c
(e_addressbook_reflow_adapter_class_init): fix arg info - we're
only passing 1 GTK_TYPE_POINTER arg, not 2.
* gui/widgets/e-minicard.c (e_minicard_event): lots of fixes for
DnD. For GDK_BUTTON_PRESS, we grab immediately. For
GDK_BUTTON_MOTION, we start the drag after a certain threshold,
and connect to the "drag_end" signal on our canvas so we'll know
when the drag is complete. For GDK_BUTTON_RELEASE, we release the
grab if we were dragging and get the event.
(e_minicard_drag_end): new function, just remove the pointer/gtk
grabs and disconnect.
* gui/widgets/e-minicard.h (struct _EMinicard): add "gint
drag_button"
2001-08-20 JP Rosevear <jpr@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_changes_foreach_key): use DB_NOTFOUND const
2001-08-20 JP Rosevear <jpr@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_process_get_changes): null out card_sexp so that
we don't crash when copying
2001-08-20 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c: fix warnings, get compiling again
* conduit/address-conduit-config.h: remove c/p typos
* conduit/address-conduit.h: ditto
* conduit/Makefile.am: link against the static camel
2001-08-20 Damon Chaplin <damon@ximian.com>
* gui/contact-editor/e-contact-editor.c: use bigger Save icon for
toolbar. Used Delete icon in menu.
* gui/component/addressbook.c: use 'Save As' icon rather than 'Save'
as it seems more appropriate. Also added delete icon for menu.
2001-08-19 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c: Update the folder list to
include a display name and a description.
2001-08-19 Damon Chaplin <damon@ximian.com>
* gui/component/addressbook.c: use new Cut/Copy/Paste/Save/Search
icons.
2001-08-19 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook.c (set_folder_bar_label),
gui/widgets/e-addressbook-model.c,
gui/widgets/e-addressbook-model.h (update_folder_bar_message),
gui/widgets/e-addressbook-view.c, gui/widgets/e-addressbook-view.h
(folder_bar_message): Set the folder bar message here. Fixes
Ximian bug #4670.
* gui/component/select-names/e-select-names-model.c (SEPLEN): Use
strlen(SEPARATOR) here so that if the separator changes the length
will work properly.
2001-08-19 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/fulladdr.glade: Added full country list.
Fixes Ximian bug #5123.
2001-08-18 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c: Hook up `delete-message.png' as the
icon for "ContactDelete".
* gui/contact-editor/e-contact-editor.c: Likewise.
2001-08-17 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-storage.h: add prototype for
addressbook_get_other_contact_storage.
* gui/component/addressbook-storage.c
(addressbook_get_other_contact_storage): rename register_storage
to this, and return the EvolutionStorage.
(load_source_data): register_storage =>
addressbook_get_other_contact_storage.
(addressbook_storage_add_source): register_storage =>
addressbook_get_other_contact_storage.
2001-08-17 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor.c
(set_entry_changed_signals): connect to the "changed" signal on
"entry-web" to update command state.
2001-08-17 Chris Toshok <toshok@ximian.com>
* gui/contact-list-editor/e-contact-list-editor.c (list_added_cb):
call e_card_set_id on the list's card so we can continue to use
this dialog. also, call command_state_changed if we aren't
closing the dialog so the toolbar is properly sensitized.
(list_deleted_cb): always close the dialog after we successfully
delete a list.
* gui/contact-editor/e-contact-editor.c (card_added_cb): call
e_card_set_id on the card so we can continue to use this dialog
(to modify or delete the card.)
(card_deleted_cb): always close the dialog after we successfully
delete a card.
2001-08-17 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (addressbook_query_changed): call
e_sexp_encode_string on the search string the user types in so it
doesn't break sexp parsing in the wombat.
2001-08-17 Damon Chaplin <damon@ximian.com>
* gui/component/addressbook.c: changed to new print icon.
2001-08-17 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names.c: (struct
ESelectNamesFolder): rename physical_uri to uri, since it includes
the addressbook.db for file: uris.
(e_select_names_folder_free): physical_uri => uri.
(e_select_names_option_activated): physical_uri => uri, and we
don't need to strdup_printf "addressbook.db" onto the end anymore.
(new_folder): if the physical_uri is a file: uri, append
/addressbook.db onto it.
(hookup_listener): new function, split out lots of code from
e_select_names_hookup_shell_listener.
(e_select_names_hookup_shell_listeners): rename
e_select_names_hookup_shell_listener to this, and hookup both the
local and "Other Contacts" listener, using hookup_listener.
(e_select_names_destroy): disconnect from the
other_contacts_listener and unref it.
* gui/component/select-names/e-select-names.h (struct
_ESelectNames): add a listener for Other Contacts, and rename
"listener" to "local_listener."
2001-08-17 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_seq_complete_cb): If we get the
"sequence_complete" signal when we aren't searching, it means the
addressbook changed out from under us. Clear the search cache, so
that future completion requests won't use the out-of-date cached
data. Also, don't unref book_view... we leave the EBookView open
so that we can catch these addressbook changes.
(e_select_names_completion_do_query): Don't use the book_view
being non-NULL as a sign that another query is still running.
(e_select_names_completion_got_book_view_cb): Properly unref any
previous value in book_view.
2001-08-17 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c
(e_addressbook_reflow_adapter_right_click),
gui/widgets/e-addressbook-view.c (table_right_click): Changed the
messages here in the right click menus.
2001-08-17 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (view_destroy): unref our
card_sexp.
(create_card_handler): make sure to set the id of the vcard so it
gets properly transmitted back to the BookView, and notify all
matching BookViews to add the created card.
(remove_card_handler): notify all matching BookViews to remove the
card.
(modify_card_handler): notify all matching BookViews to modify the
card.
(pas_backend_ldap_process_get_book_view): init card_sexp based on
the view's search.
2001-08-17 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_book_view_copy): use card_sexp.
(pas_backend_file_book_view_free): same.
(vcard_matches_search): use the new pas_backend_card_sexp_match_vcard call.
(pas_backend_file_search): use card_sexp.
(pas_backend_file_process_get_book_view): same.
* backend/pas/Makefile.am (libpas_a_SOURCES): add
pas-backend-card-sexp.[ch].
2001-08-17 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook-component.c (factory_fn): Added code
so the user can create a new contact or contact list from anywhere
in evolution.
2001-08-16 Jeffrey Stedfast <fejj@ximian.com>
* backend/pas/evolutionperson.schema: Added a closing paren.
2001-08-16 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_handle_request): Renamed from _begin to
match changes in gal 0.10.99.3.
* gui/contact-editor/e-contact-quick-add.c (e_contact_quick_add):
Check that name != NULL before we start messing with it.
(Fixes bug #7329)
2001-08-16 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(match_nickname): Boost scoring on an exact nickname match.
Manually addressify match.
(match_name): Manually addressify matches.
(book_query_score): Remove automatic addressification.
* gui/component/addressbook.c (addressbook_query_changed): Minor
tweak to avoid a crash if we have a negative subid with id
ESB_CATEGORY. This should never happen.
(addressbook_menu_activated): Reset the entry/option when we
select "Clear".
Some changes to reflect renaming in ESearchBar.
* gui/component/select-names/e-select-names-bonobo.c
(entry_set_property_fn): Cardify after importing destinations.
This might fix a problem that Damon is having.
2001-08-15 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.glade: set title of initial
dialog to Addressbook Sources (bug #6704).
2001-08-15 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-storage.c (create_ldap_folder): don't
let people add subdirs in the ldap server storage - everything is
toplevel there.
2001-08-14 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_process_get_vcard): implement using
search_for_dn.
2001-08-14 Federico Mena Quintero <federico@ximian.com>
* gui/component/addressbook.c (addressbook_factory_new_control):
Tell the search bar to translate the subitem texts.
2001-08-14 Jon Trowbridge <trow@ximian.com>
* gui/component/addressbook.c (addressbook_factory_new_control):
Add "Any Category" option for category searches.
(addressbook_query_changed): Do the right thing on an
"Any Category" search.
2001-08-14 Dan Winship <danw@ximian.com>
* backend/pas/pas-backend-ldap.c: Fix up to match the
pas_book_new/get_vcard changes.
2001-08-14 Christopher James Lahey <clahey@ximian.com>
* gui/merging/e-card-merging-book-commit-duplicate-detected.glade:
Got rid of an extraneous _ here.
* gui/widgets/e-addressbook-util.c (e_addressbook_error_dialog):
Changed Canceled to Cancelled here. Fixes Ximian bug #2465.
2001-08-14 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-book.c (pas_book_respond_get_vcard): Oops,
forgot to write this function.
2001-08-14 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/contact-editor.glade: Added focus targets
here. Fixes part of Ximian bug #5843.
2001-08-14 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/e-contact-editor.c (e_contact_editor_init):
Grab focus here. Fixes Ximian bug #2265.
2001-08-14 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook.c (addressbook_factory_new_control):
(addressbook_query_changed): Fixed two const warnings here.
* printing/e-contact-print-envelope.c,
printing/e-contact-print-envelope.h: Fixed some missing includes
here.
2001-08-14 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book-view.c (add_book_iterator): Call
e_card_set_book here.
* backend/ebook/e-book.c (e_book_do_response_get_vcard): Call
e_card_set_book here.
* backend/ebook/e-card.c, backend/ebook/e-card.h: Pulled out the
part where the uri is made part of the uid. Made uri a separate
field. Fixes Ximian bug #6490.
* backend/ebook/e-destination.c, backend/ebook/e-destination.h:
Change this to use ECard's split uids and uris.
2001-08-13 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (add_to_supported_fields): don't
g_strdup the stuff we're passing into e_list_append, since it does
the copy for us.
(check_schema_support): don't initialize supported_fields list
here, since there's a gross case where the programmer/user can
bring up the contact editor before the connection stuff is
finished, and we don't want to crash.
(pas_backend_ldap_init): move it here to we can guarantee it's
there. (bug #6546).
2001-08-13 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c
(addressbook_source_dialog_set_source): don't access source->auth
if source == NULL (bug #7086).
2001-08-13 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book-listener.c,
backend/ebook/e-book-listener.h, backend/ebook/e-book.c,
backend/ebook/e-book.h, backend/idl/addressbook.idl,
backend/pas/pas-backend-file.c, backend/pas/pas-book.c,
backend/pas/pas-book.h: Changed get_card to be asyncronous.
* backend/ebook/e-card.c, backend/ebook/test-client.c: Changed
these to deal with the new get_card functionality.
2001-08-11 Kjartan Maraas <kmaraas@gnome.org>
* gui/component/select-names/e-select-names.c: Mark a string for translation.
* This fixes bug #7052
* printing/e-contact-print.h: Add headers to make it stand on itw own.
* printing/e-contact-print.c: Marked some strings for translation.
* printing/e-contact-print-envelope.c: Same here.
2001-08-10 Jon Trowbridge <trow@ximian.com>
* gui/contact-editor/e-contact-quick-add.c (e_contact_quick_add):
Remove single- or double-quotes from names before sticking them
into the addressbook. (Bug #6499)
* gui/component/addressbook.c (addressbook_query_changed):
Properly handle "Category is" queries by checking the search bar
suboption.
(addressbook_factory_new_control): Attach subitems corresponding
to all wombat categories to the "Category is" ESearchBarItem.
* gui/component/addressbook.c: Set the ESearchBarItem
subitems explicitly to NULL.
2001-08-10 Anna Marie Dirks <anna@ximian.com>
* gui/component/select-names/select-names.glade: did a little
packing-magic to get the two tables at bottom of this dialog
to seem to line up.
*gui/component/select-names/e-select-names.c: changed the title
of this dialog to "Select Contacts from Addressbook".
2001-08-09 Anna Marie Dirks <anna@ximian.com>
* gui/component/select-names/select-names.glade: redesigned
this dialog to fix bug #6815.
*gui/component/select-names/e-select-names.c: connected the
widgets (or one of them anyway. clahey did the rest) for my
new and lovely glade file.
2001-08-09 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c: remove passwd_cb.
2001-08-09 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-text-model.c
This change is dedicated to Jacob Berkman.
(e_select_names_text_model_insert_length): If the last character
we inserted was a "magic comma", remember its position.
(e_select_names_text_model_delete): If the last character we
inserted was a "magic comma", and if the next thing we do is to
hit backspace, delete both the comma and the extra whitespace we
added.
(e_select_names_text_model_init): Initialize our last magic comma
position.
2001-08-09 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_create_entry): Hook up some magic to
(basically) cardify an entry on focus-out. (What we do is actually
more complicated than that.)
* gui/component/select-names/e-select-names-bonobo.c
(entry_set_property_fn): After we set an entry's text, try to
cardify it. We need to do this so that (for example) reply
e-mails get properly cardified.
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_duplicate): Use e_select_names_model_append,
rather than manipulating lists directly.
(e_select_names_model_insert): Connect "changed" signal proxy for
added EDestination.
(e_select_names_model_append): Ditto.
(e_select_names_model_replace): Ditto, and disconnect signals for
replaced EDestination.
(e_select_names_model_delete): Ditto on the disconnection.
(e_select_names_model_delete_all): Ditto.
(e_select_names_model_cardify): Added. Try to cardify a specified
EDestination.
(e_select_names_model_cancel_cardify): Added. Cancel the pending
cardification of a single EDestination.
(e_select_names_model_cardify_all): Added. Cardify all of the
EDestinations in the model.
(e_select_names_model_cancel_cardify_all): Added. Cancel's any
and all pending cardifications.
* backend/ebook/e-destination.c (e_destination_class_init): Added
"changed" and "cardified" signals.
(e_destination_freeze): Added (static).
(e_destination_thaw): Added (static).
(e_destination_clear_card): Reset allow_cardify and
cannot_cardify, cancel any pending cardifications, and emit the
"changed" signal.
(e_destination_clear_strings): Emit the "changed" signal.
(e_destination_clear): Do freeze/thaw to prevent multiple signal
emissions.
(e_destination_set_card): Check that the card we are setting is
not equal to the current card, and emit the "changed" signal if we
are actually changing.
(e_destination_set_card_uri): Emit "changed" signal, if necessary.
(e_destination_set_name): Emit "changed" signal, if necessary.
(e_destination_set_email): Emit "changed" signal, if necessary.
(e_destination_set_html_mail_pref): Emit "changed" signal, if
necessary.
(use_card_cb): If we've just loaded/set the ECard, emit the
"changed" signal.
(e_destination_set_raw): Emit "changed" signal, if necessary.
(e_destination_allow_cardification): Added.
(e_destination_set_allow_cardification): Added.
(e_destination_cardify): Added. Tries to automatically convert
a string-based EDestination to one based on an ECard.
(e_destination_cardify_delayed): Added. Cardifies in a timeout.
(e_destination_cancel_cardify): Added. Cancels any pending
cardifications.
(e_destination_xml_decode): Added freeze/thaw.
* backend/ebook/e-book-util.c (e_book_nickname_query): Added. A
canned simple query for nicknames.
* backend/ebook/e-card.c (e_card_email_find_number): Added. Given
a card and an string containing an email address, return the index
number of the address inside of the card, or -1 if the address is
not found.
2001-08-09 Chris Toshok <toshok@ximian.com>
[ Fixes ximian bugs #5080, #6021, #6704, #6705 ]
* gui/component/addressbook.c (book_open_cb): create our own
dialog that prompts for both the email address and the password.
the email address is stored in the source and filled in for the
user after the first time they enter one and press OK.
* gui/component/addressbook-storage.c (create_ldap_folder): has a
return value, not a int* parameter.
(create_ldap_folder): new function, we can create ldap servers
from the File->New->Folder menu item now.
(register_storage): hook up the "create_folder" signal.
(addressbook_storage_init_source_uri): remove the file case, we
only build ldap uris here.
(load_source_data): remove the file source stuff, and handle
"emailaddr".
(save_source_data): call ldap_source_foreach directly.
(addressbook_source_free): remove file source stuff.
(addressbook_source_copy): same.
* gui/component/addressbook-storage.h: get rid of all the file
source stuff from AddressbookSource, since this is only being used
for ldap servers.
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_process_authenticate_user): look up the ldap
entry based on the provided email address and use the resulting
DN/passwd to authenticate.
* gui/component/addressbook-config.c: pretty much gutted to make
it work with the new UI.
* gui/component/addressbook-config.glade: new version from anna.
2001-08-09 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c (SPEC): Upped the minimum width
on all addressbook columns to 75. Fixes Ximian bug #2773.
2001-08-08 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-quick-add.c (ce_have_book): mark
the dialog as changed so the save button is immediately available.
* gui/contact-editor/e-contact-editor.c (card_modified_cb): once
we save reset the change flag to false if we aren't closing the
dialog.
(card_added_cb): same.
(e_contact_editor_class_init): add a "changed" arg.
(e_contact_editor_set_arg): add setter for "changed".
(e_contact_editor_get_arg): add getter for "changed".
2001-08-08 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-quick-add.c (ce_have_book): better
to assume that we can write to the local addressbook than that we
can't write to it :)
2001-08-08 Chris Toshok <toshok@ximian.com>
* gui/contact-list-editor/e-contact-list-editor.c (create_ui):
call e_pixmap_update so we can use the same save/save-as pixmaps
as the contact editor.
2001-08-08 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c (open_card): new
function, used by the context menu.
(e_addressbook_reflow_adapter_right_click): put "Open" at the top
of the menu. also, disable "Delete" if the addressbook isn't
writable.
2001-08-08 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (rfc2254_escape): escape *, \, (,
and ), as per rfc2254.
(func_contains): escape the string.
(func_is): same.
(func_beginswith): same.
(func_endswith): same.
2001-08-08 Nat Friedman <nat@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c (print_envelope): If 0'd out
since Envelope printing is disabled for 1.0.
* gui/widgets/e-addressbook-view.c (print_envelope): Likewise.
* gui/contact-editor/e-contact-editor.c (print_envelope_cb): Likewise.
* gui/widgets/e-addressbook-reflow-adapter.c
(e_addressbook_reflow_adapter_right_click): Removed "Print
Envelope" menu item.
* gui/widgets/e-addressbook-view.c (table_right_click): Likewise.
* gui/contact-editor/e-contact-editor.c (verbs): Likewise.
2001-08-07 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-storage.c (remove_ldap_folder): ifdef
this HAVE_LDAP.
2001-08-07 Chris Toshok <toshok@ximian.com>
* gui/search/e-addressbook-search-dialog.c
(e_addressbook_search_dialog_init): set the title of the window to
"Advanced Search".
2001-08-07 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (search_cb): pass view->view instead
of the EBook.
(addressbook_search_menu_items): remove E_FILTERBAR_ADVANCED.
(addressbook_menu_activated): remove E_FILTERBAR_ADVANCED.
(addressbook_search_option_items): add "Advanced..." here.
(addressbook_query_changed): add special handling for Advanced...
* gui/search/e-addressbook-search-dialog.h (struct
_EAddressbookSearchDialog): add EAddressbookView and remove the
model/adapter fields. Also fix prototype of
e_addressbook_search_dialog_new.
* gui/search/e-addressbook-search-dialog.c
(e_addressbook_search_dialog_class_init): get rid of
set_arg/get_arg.
(button_press): set the query on the EAddressbookView, and always
close the dialog.
(e_addressbook_search_dialog_init): get rid of the minicard view,
and pack the other widgets accordingly.
(e_addressbook_search_dialog_new): pass EAddressbookView instead
of EBook.
(e_addressbook_search_dialog_destroy): remove model/adapter stuff.
2001-08-07 Chris Toshok <toshok@ximian.com>
[ Fixes bug #5066 ]
* gui/component/addressbook-storage.c (remove_ldap_folder): new
function, remove the source.
(register_storage): connect to the "remove_folder" signal so we
know when to remove the folder.
2001-08-07 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (build_card_from_entry): use
g_strcasecmp since ldap attribute names are not case sensitive.
2001-08-07 Chris Toshok <toshok@ximian.com>
* gui/contact-list-editor/e-contact-list-editor.c
(table_drag_data_received_cb): make sure we update the changed
state if a successful drop happens.
2001-08-07 Jason Leach <jleach@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_init): Make the OK button the keyboard default
instead of Cancel. Bug #4942.
2001-08-06 Radek Doulik <rodo@ximian.com>
* backend/ebook/e-book.c (e_book_op_free): new EBookOp destructor
(e_book_unqueue_op): use e_book_op_free
(e_book_do_response_create_card): ditto
(e_book_do_response_generic): ditto
(e_book_do_response_get_cursor): ditto
(e_book_do_response_get_view): ditto
(e_book_do_response_get_changes): ditto
(e_book_do_response_open): ditto
(e_book_do_response_get_supported_fields): ditto
2001-08-05 Radek Doulik <rodo@ximian.com>
* backend/ebook/e-book.c (e_book_do_response_get_view): set
op->listener to NULL to catch possible use of freed op
(e_book_do_response_get_changes): ditto
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_check_queue): this callback could be (and
indeed is) called from signal emited above,
signal handler could call e_book_view_listener_stop, so we need to check
if idle is still set and if not we don't want to unref again
2001-08-04 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-compare.c (e_card_compare_name): Made it so
that if there's one less match than possible compares are
considered more VAGUE. Fixes Ximian bug #3400.
2001-08-03 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_hookup_shell_listener): Check for storage != NULL
here. This shouldn't come up unless addressbook has crashed
previously within this session of evolution, but this is just a
bit of insurance. Fixes Ximian bug #3699.
2001-08-03 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card.c (e_card_name_match_string): Changed the
criteria of whether the first part of each iteration matched or
the second one did. Before it got it wrong sometimes and caused
the pointer to jump off the end of the array. Fixes Ximian bug
#4674.
2001-08-03 Jason Leach <jleach@ximian.com>
* gui/component/addressbook-storage.c (load_source_data): Update
for EvolutionStorage API changes.
(addressbook_storage_add_source): Ditto.
2001-08-03 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c (jump_to_letter): Made this
change the query based on which letter is clicked. Fixes Ximian
bug #2202.
2001-08-03 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook.c (addressbook_factory_new_control):
Fixed warnings here.
* gui/component/select-names/e-select-names-completion.c
(hash_cleanup_fn): Removed this unused function.
2001-08-03 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.c (e_card_simple_sync_card,
fill_in_info): Made the list of E_CARD_PHONE types in
phone_correspondences more complete by adding the new 5
E_CARD_PHONE types. Also, made it a bit less restrictive for some
types (E_CARD_PHONE_HOME will actually match
E_CARD_SIMPLE_PHONE_ID_HOME now.) Made e_card_simple_sync_card
and fill_in_info search for an exact match in the list of
phone_correspondences and then look for a partial match. Got rid
of not going forward when doing a remove from an EList since EList
handles this case automatically.
* backend/ebook/e-card-types.h: Added E_CARD_PHONE types for
assistant, callback, radio, telex, and ttytdd.
* backend/ebook/e-card.c (get_phone_flags, set_phone_flags):
Handle the new E_CARD_PHONE types.
2001-08-02 Jon Trowbridge <trow@ximian.com>
* printing/Makefile.am (ecpsdir): Add camel dependency.
* gui/component/Makefile.am: Add camel dependency.
* backend/ebook/Makefile.am: Add camel dependency.
* gui/component/addressbook-factory.c (main): Properly init camel.
* backend/ebook/e-destination.c (e_destination_clear_strings):
Clear ->raw.
(e_destination_is_empty): We aren't empty if ->raw is set..
(e_destination_set_raw): Replaces e_destination_set_string.
(e_destination_get_name): Use camel's parser to extract the name
from ->raw.
(e_destination_get_email): Use camel's parser to extract the email
address from ->raw.
(e_destination_get_address): Use camel to produce properly quoted,
RFC-compliant addresses. Thanks camel! (Bug #5860)
* gui/component/select-names/e-select-names-completion.c
(emailify_match): Always append an e-mail address, as long as it
doesn't have one already at it's beginning or end. Don't limit
self to just emailifying entries tied to cards with multiple
addresses. (I didn't really want to do this, but people seem to
like keeping multiple cards for the same person, and other
solutions (like scanning all matches for duplicate names, and only
emailifying those) just seemed like way too much work for such a
limited payoff.)
* gui/component/select-names/e-select-names-text-model.c:
s/e_destination_set_string/e_destination_set_raw/.
* gui/component/select-names/e-select-names-popup.c
(popup_menu_card): Quote _'s in our popup menus, so that "foo_bar"
doesn't get displayed as "foobar" w/ the 'b' underlined. (Bug
#5558)
(popup_menu_nocard): Ditto.
2001-08-02 Jason Leach <jleach@ximian.com>
* gui/component/addressbook.c (addressbook_factory_new_control):
Removed some extra padding and pack the addressbook view into a
frame with inward shadowing, just because it looks prettier.
* gui/contact-editor/e-contact-editor.c: Use the updated Save,
Save As, and Print icons for the menus and toolbar.
2001-08-02 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook.c: Added ContactsSaveAsVCard,
ContactsSendContactToOther, and ContactsSendMessageToContact verbs
here.
* gui/widgets/e-addressbook-view.c,
gui/widgets/e-addressbook-view.h (e_addressbook_view_save_as,
e_addressbook_view_send, e_addressbook_view_send_to): New
functions to allow outside users to cause the addressbook to save,
send, or send a message to its selection.
2001-08-01 Christopher James Lahey <clahey@ximian.com>
* contact-editor/.cvsignore: Removed this file from this unused
directory.
2001-08-01 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/Makefile.am: Added file-exists.glade.
* gui/contact-editor/e-contact-save-as.c (file_exists),
gui/contact-editor/file-exists.glade: Added a dialog to ask the
user whether to replace an already existing file. Mostly from a
patch by Jos Dehaes. Fixes Ximian bug #2231.
2001-08-01 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_check_queue): Removed thrash checking code
here since thrashing shouldn't happen now that we've cleaned this
up some.
* backend/ebook/e-book.c (e_book_do_response_get_view): Properly
handle cases where construction fails.
2001-07-30 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/evolution-vcard-importer.c: Added #include
<e-util/e-path.h>.
2001-07-23 Zbigniew Chyla <cyba@gnome.pl>
* gui/component/addressbook-config.c (addressbook_source_dialog):
Convert translated string to UTF8 before calling put_html.
2001-07-30 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_do_query): Properly handle the case
where our "cleaned" completion is the empty string. This happens,
for example, if the query text is the string "\"". (Bug #5610).
* backend/ebook/e-destination.c (e_destination_get_address_textv):
Reassure fejj that I'm not doing something stupid here.
(e_destination_get_address): Fix address quoting. This is a
stop-gap measure until I can change this code to use Camel's
superior address-handling routines. (Also Bug #5610)
2001-07-30 Jason Leach <jleach@ximian.com>
* gui/component/addressbook-storage.c (load_source_data): Fix a
return value bug, to make it so if it fails to load an
addressbook-sources.xml file (either a parse error or it doesn't
exist for example), it deregisters the storage.
(register_storage): Don't make a storage for users who don't have
LDAP support built in. Bug #1950.
2001-07-30 Frederic Crozat <fcrozat@mandrakesoft.com>
* addressbook/gui/component/addressbook-factory.c: Fix crashes
when gtkhtml is compiled with gconf support
2001-07-27 JP Rosevear <jpr@ximian.com>
* conduit/Makefile.am: Tidy ldadds
2001-07-26 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-bonobo.c: Fixing a
small, stupid mistake; use e_select_names_model_get_textification
for the getter for "text".
* backend/ebook/e-card.c: Removed some debugging chatter.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_create_entry): Store the completion
handler in the entry's object data.
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): Added support for getting "destinations"
and "allow_contact_lists" properties.
(entry_set_property_fn): Added support for setting "destinations"
and "allow_contact_lists" properties.
(impl_SelectNames_get_entry_for_section): Added definitions for
"destinations" and "allow_contact_lists" properties.
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_get_match_contact_lists): Added.
(e_select_names_completion_set_match_contact_lists): Added.
Controls whether contact lists are offered as options during
completion.
(book_query_process_card_list): Check if match_contact_lists
is set before (duh!) matching on a contact list.
(e_select_names_completion_init): Set match_contact_lists
to TRUE by default.
2001-07-25 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (func_contains): change the way
x-evolution-any-field is converted to an ldap query. it used to
be we'd nest queries like: (|(|(|(foo=*x*))(bar=*x*))(baz=*x*)).
now we build it like: (|(foo=*x*)(bar=*x*)(baz=*x*)). much more
efficient (both in the building, and on the server side no doubt).
2001-07-25 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-destination.c (e_destination_get_name): Properly dup
the results of e_destination_get_email.
* gui/component/select-names/e-select-names-popup.c
(e_select_names_popup): Check that our destination isn't empty
before building our popup. (Bug #5250)
* backend/ebook/e-destination.c (e_destination_is_empty): Made
argument const.
2001-07-24 Jon Trowbridge <trow@ximian.com>
* gui/contact-list-editor/e-contact-list-model.c: Added checks
for all of the args of the exposed functions, so that
we won't crash on bad inputs. (Related to bug #4856.)
2001-07-24 Jason Leach <jleach@ximian.com>
* gui/merging/e-card-duplicate-detected.glade: "_Add Anyway" to
"Add Anyway".
2001-07-24 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-destination.c (e_destination_get_name): Added
fallbacks for the name in the case of an e-card, to avoid the
"nameless contact" bug.
2001-07-24 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard.c (remodel): need the EDestination magic
here too for when we modify an already shown card.
* gui/contact-list-editor/e-contact-list-model.c: make
parent_class static, just to be anal.
* gui/contact-list-editor/e-contact-list-editor.c
(remove_entry_cb): removing entries changes the list, so flag it.
(table_drag_data_received_cb): restrict cards we add to lists to
be non-list cards.
(extract_info): clear out the email list in the card before we
repopulate it from the contact list model.
(fill_in_info): set the checkbox to active/inactive based on
thecard.
2001-07-24 Chris Toshok <toshok@ximian.com>
* gui/contact-editor/e-contact-editor.c (wants_html_changed): call
widget_changed.
(phone_entry_changed): same.
(email_entry_changed): same.
(address_text_changed): same.
(name_entry_changed): same.
(company_entry_changed): same.
(widget_changed): new function that we can either call or set as a
signal to change the "changed" flag on the dialog.
(set_entry_changed_signals): connect lots of "changed" signals on
widgets to widget_changed.
(add_lists): connect "changed" to widget_changed.
2001-07-24 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_hookup_shell_listener): Check if
evolution_shell_client_get_local_storage returns CORBA_OBJECT_NIL,
which it should never do. If it does, print a warning in a dialog
and try to recover w/o crashing. (Bug #5193)
2001-07-24 Dan Winship <danw@ximian.com>
* backend/ebook/e-book-listener.c (e_book_listener_stop): Don't
stop the idle_queue and unref from here, since this might be
called from inside e_book_listener_check_queue, and we don't want
to return to that function with the listener having been
destroyed.
(e_book_listener_check_queue): Don't exit early if the queue is
stopped. Proceed through the check if the queue is NULL (which is
must be if the queue is stopped), and then reach the existing code
to remove the idle handler. Combined with the above, this fixes
ximian #4485 (again). This is not a plot to boost my
showstopper-bugfixing count by fixing the same bug over and over
again.
2001-07-23 Dan Winship <danw@ximian.com>
Re-fix for my 07-18 not-quite-fix.
* backend/ebook/e-book-listener.c: Add a "stopped" flag like
EBookViewListener.
(e_book_listener_check_queue): Don't emit signals if the listener
is stopped.
(e_book_listener_queue_generic_response, etc): Don't queue
responses if the listener is stopped.
(e_book_listener_stop): Flush the queue and stop queue/emitting
further responses.
* backend/ebook/e-book.c (e_book_unload_uri): Revert the previous
change and call e_book_listener_stop() instead.
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_stop): When removing an idle handler, unref
the listener as well, since e_book_view_listener_queue_response
will have ref'ed it.
2001-07-22 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (remove_folder): Add a
@type arg. If the type is not "contacts", report an
`UNSUPPORTED_TYPE' error through the listener. Also, remove
`g_print()' debugging messages.
(xfer_folder): Likewise.
2001-07-21 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c: Make the "contacts"
folders user-creatable by setting `user_creatable' to %TRUE in the
`EvolutionShellComponentFolderType's.
2001-07-18 Chris Toshok <toshok@ximian.com>
[ patch contributed by Jos Dehaes <jos.dehaes@bigfoot.com> ]
* gui/component/addressbook-storage.c (register_storage): new
function, register our evolution_storage.
(addressbook_storage_setup): remove storage registration from
here.
(load_source_data): register the storage here before we load
addressbook-sources.xml, and deregister it if there are no sources
listed.
(addressbook_storage_remove_source): unregister the storage if the
list of sources hits 0 length.
2001-07-18 Dan Winship <danw@ximian.com>
* backend/ebook/e-book.c (e_book_unload_uri): Flush the listener's
queue before unreffing it to ensure that it doesn't emit any more
"responses_queued" signals after the EBook is destroyed.
* backend/ebook/e-book-listener.c (e_book_listener_check_queue,
e_book_listener_queue_response, e_book_listener_new): Use
bonobo_object_ref/unref rather than gtk_object_ref/unref.
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_queue_response, e_book_view_listener_new):
Likewise.
2001-07-18 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-card-compare.c (simple_query_cb): prune the list
of cards that match our query using the avoid list here, instead
of using the avoid list in the query itself, since ldap can't
handle that.
(use_common_book_cb): remove the block of code including the avoid
list in the query sent to wombat.
2001-07-17 Chris Toshok <toshok@ximian.com>
[ Fixes bugs #4611 - crash searching in the name field at Bigfoot for "\"
and #4554 - general ldap search crash ]
* backend/pas/pas-backend-ldap.c (func_contains): the length of
the big query string needs to take into account the length of the
footer as well as the header - fix random memory corruption here.
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_build_query):
list can be NULL, specifically if there's a parsing error in the
sexp, so deal with it.
2001-07-17 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_queue_response): Hold a reference to our
listener while the idle function is active.
(e_book_view_listener_check_queue): Only unref the listener when
the idle function is finished.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_clicked): Instead of replacing section->model with
source, copy source onto section->model with
e_select_names_model_overwrite_copy. #if 0/#endif out all of the
stuff related to ETextModels, because it doesn't make any sense to
me, and everything appears to work without it.
(Die bug #2059. Die! Die! Die!)
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_overwrite_copy): Added. Copies the contents
of one ESelectNamesModel onto another.
* backend/ebook/e-destination.c (e_destination_copy): Made the argument
const.
* backend/ebook/e-destination.c (e_destination_set_string): Removed
old, broken code and annoying g_messages.
* backend/ebook/e-book-listener.c
(e_book_listener_queue_response): Hold a reference to the listener
while the idle function is active.
(e_book_listener_check_queue): Only release our reference to the
listener when the queue is empty. These two changes fix a race
condition, since the listener could be unrefed while the listener
was still active. (Seems to fix bug #4485)
2001-07-17 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/contact-editor.glade,
gui/merging/e-card-duplicate-detected.glade,
gui/merging/e-card-merging-book-commit-duplicate-detected.glade,
printing/e-contact-print.glade: Patch from Taylor Hayward
<thayward@gjpc.com>. Added accelerators to a few dialogs.
2001-07-16 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/Evolution-Addressbook-SelectNames.idl:
Added addSectionWithLimit to the SelectNames interface.
* gui/component/select-names/e-select-names-bonobo.c
(impl_SelectNames_add_section_with_limit): Added. Implements
addSectionWithLimit.
(e_select_names_bonobo_construct): Set up as a BonoboEventSource.
(init): Listen for "changed" signals from our manager.
(manager_changed_cb): Notify our listeners if we get a changed
signal from our manager.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_class_init): Added a "changed" signal".
(section_copy): Propogate the signal connection.
(section_free): Disconnect the changed handler.
(e_select_names_manager_add_section_with_limit): Connect to the
new section's model, listening for changes.
(e_select_names_manager_activate_dialog): Connect to the "working
copy" model, listening for changes.
(e_select_names_manager_add_section_with_limit): Added.
(e_select_names_manager_add_section): Changed to just be a special
case of e_select_names_manager_add_section_with_limit.
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_set_limit): Added. Allows a max number of
names allowed in the model.
(e_select_names_model_get_limit): Added. Returns the limit.
(e_select_names_model_at_limit): Added. Returns TRUE if the
model is "full".
(e_select_names_model_insert): Check that we aren't at the
limit before inserting. Silently return if we are.
(e_select_names_model_append): Check that we aren't at the
limit before appending. Silently return if we are.
2001-07-16 Chris Toshok <toshok@ximian.com>
[ Fix bug #4705 - LDAP storage gets saved with corrupted binddn]
* gui/component/addressbook-config.c (addressbook_dialog_apply):
call addressbook_storage_write_sources here after we're done
rebuilding them.
* gui/component/addressbook-storage.c
(addressbook_storage_clear_sources): don't write the source file
here.
(addressbook_storage_add_source): same.
(addressbook_storage_remove_source): same.
(addressbook_storage_write_sources): new function, write the
source file out.
(addressbook_source_copy): g_strdup the binddn so we don't end up
free'ing it multiple times thanks to copies freeing theirs.
* gui/component/addressbook-storage.h: add prototype for
address_storage_write_sources.
2001-07-16 Iain Holmes <iain@ximian.com>
* backend/pas/evolution-vcard-importer.c (ebook_create): Don't just
use the default directory. Use the directory that is passed into the
load file function.
2001-07-15 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-destination.c (e_destination_set_string):
Commented out some unused variables and labels.
(e_destination_importv): Check for the xml not parsing correctly
and just return NULL here.
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_import_destinationv): Handle a NULL destv
here.
2001-07-15 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c (table_drag_data_get): Added a
call to e_table_view_to_model_row here.
(e_addressbook_view_can_print, e_addressbook_view_can_delete,
e_addressbook_view_can_copy): If the selection model is NULL here,
return NULL (this was done before in a g_return_val_if_fail which
is only conditionally included.)
2001-07-13 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/contact-editor.glade: Changed Company to
Organization here.
2001-07-12 JP Rosevear <jpr@ximian.com>
* backend/pas/Makefile.am: add ldap cflags
2001-07-12 Jeffrey Stedfast <fejj@ximian.com>
* backend/ebook/e-destination.c (e_destination_xml_decode):
Oops. I introduced my own bug, accidently set `email' to a
g_free'd pointer - eek!
2001-07-12 Jeffrey Stedfast <fejj@ximian.com>
* backend/ebook/e-destination.c (e_destination_importv): Optimized
the same way I optimized g_strsplit. If you use a GPtrArray
instead of a linked list, you save yourself from having to iterate
through the list an extra 3 times.
(e_destination_xml_decode): Do NOT, I repeat: do NOT!
e_utf8_xml1_decode something which is already in UTF-8 or you'll
corrupt it!! I smack thee who hath done this evil deed!
2001-07-12 Iain Holmes <iain@ximian.com>
* backend/e-book/evolution-vcard-importer.c (support_format_fn):
Check for no extension. Actually same as Jason's fix below :) but
also check the file contents.
2001-07-12 JP Rosevear <jpr@ximian.com>
* gui/component/addressbook-config.glade: add accelerators,
taylor's patch
2001-07-12 Jason Leach <jleach@ximian.com>
* backend/ebook/evolution-vcard-importer.c (support_format_fn):
Crash fix because strcmp() hates NULL arguments. Bug #3777.
2001-07-11 Jason Leach <jleach@ximian.com>
* gui/component/select-names/e-select-names.c (remove_cb): Added
some comments for clarity and fixed a pretty noticable bug with
how right click "Remove" was deleting more than it should with
consecutive runs.
2001-07-10 Chris Toshok <toshok@ximian.com>
* backend/pas/evolutionperson.schema: assign OID's to the schema
entries, and add schema support for contact lists.
2001-07-10 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-file.c (pas_backend_file_load_uri): Set
bf->priv->file_db before calling do_create.
2001-07-06 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook-component.c (factory_fn): Fixed order
of arguments to evolution_shell_component_new.
2001-07-08 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_insert_length): Check that str isn't
the empty string before doing an insert.
* backend/ebook/e-destination.c (e_destination_set_string): We were
being too smart for our own good here, and causing problems for
the completion code... (bug #4253, bug #4255, bug #4280)
(e_destination_set_name): Clear any cached address.
(e_destination_set_email): Clear any cached address.
(e_destination_get_address): Handle the cases where the name
contains some e-mail information.
2001-07-09 Kjartan Maraas <kmaraas@gnome.org>
* gui/contact-list-editor/e-contact-list-editor.c: Marked a
string for translation. Also add the neccesary includes to make
_() macros work.
2001-07-07 Jon Trowbridge <trow@ximian.com>
* gui/widgets/e-minicard.c (add_field): Detect the embedded
EDestination XML, and convert it to a nice-looking e-mail address.
* gui/contact-list-editor/e-contact-list-editor.c: Adjusted to
reflect changes to EContactListModel. (Yeah, this is vague,
but the changes are _really_ obvious and boring.)
* gui/contact-list-editor/e-contact-list-model.c: Revamped
to make everything an EDestination, rather than storing either
cards or strings.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_insert_length): Use
e_destination_get_textrep.
* gui/component/select-names/e-select-names-table-model.c
(fill_in_info): Use e_destination_get_name and
e_destination_get_email.
* gui/component/select-names/e-select-names-popup.c
(popup_menu_card): Use e_destination_get_name instead of
e_card_name_to_string.
(quick_add_cb): Use e_destination_get_address.
(popup_menu_nocard): Use e_destination_get_name.
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_changed): Removed obsolete debugging code.
(e_select_names_model_get_textification): Use e_destination_get_textrep.
(e_select_names_model_get_address_text): Use e_destination_get_address.
(e_select_names_model_get_string): Use e_destination_get_textrep.
(e_select_names_model_replace): Use e_destination_get_textrep.
(e_select_names_model_name_pos): Use e_destination_get_textrep.
* gui/component/select-names/e-select-names-completion.c
(emailify_match): Match only if this isn't a contact list.
(match_email): Match only if this isn't a contact list.
(match_name): Do the right thing in the case of a contact list.
(book_query_process_card_list): Don't construct a match for
each possible e-mail address if this is a contact list.
* backend/ebook/e-destination.c: Major-league de-crufting and
rationalization, combined with lots of hacks to make things work
properly with contact lists.
(e_destination_copy): Copy contact list info.
(e_destination_clear_card): Clear contact list info.
(e_destination_is_empty): If we contain a contact list, we aren't
empty.
(e_destination_set_card_uri): Added. Allows us to set a
destination by card URI.
(e_destination_set_name): Allows the contact's name only ("Jane
Smith") to be set.
(e_destination_set_email): Allows the contact's e-mail only
("jane@assbarn.com") to be set.
(e_destination_set_string): Takes a free-form string containing a
contact's name and/or e-mail, and tries to do the right thing with
it.
(e_destination_contains_card): Renamed. Used to be
e_destination_has_card.
(e_destination_from_card): Added. Returns TRUE if the
EDestination comes from either a ECard (which we presently hold)
or is specified by an ECard URI.
(e_destination_use_card): Allows an EDestination's ECard to be
accessed, via a callback. If we only are holding the URI, the
card will be loaded and stored in the EDestination.
(e_destination_get_name): Returns the name only ("Jane Smith"), or
NULL.
(e_destination_get_email): Returns the email only
("jane@assbarn.com"), or NULL.
(e_destination_get_address): Added. Returns a "full address" if
both the name & e-mail are available ("Jane Smith
<jane@assbarn.com>"), or just the e-mail if the name is unknown
("jane@assbarn.com>"). If the destination is a contact list,
returns a comma-separated list of addresses.
(e_destination_get_textrep): Added. Returns a "text
representation" of the EDestination. This is what is now
displayed for completed, "cardified" destinations in addressbook
entries.
(e_destination_is_evolution_list): Check to see if this
destination is for a contact list.
(e_destination_xml_encode): Added. Build an XML data structure
representing an EDestination.
(e_destination_xml_decode): Added. Parse an XML data structure,
constructing an EDestination.
(e_destination_export): Added. Returns a null-terminated string
containing an XML representation of the EDestination, with
newlines and excess whitespace removed.
(e_destination_import): Added. Parses a string containing an XML
representation of an EDestination.
(e_destination_exportv): Added. Returns a null-terminated string
containing an XML representation of a collection of EDestinations,
with newlines and excess whitespace removed.
(e_destination_importv): Added. Takes an XML representation of a
collection of destinations, parses it, and returns a vector of
EDestinations.
* backend/ebook/e-card.c (e_card_duplicate): Copy the ->book
pointer.
(e_card_get_id): Check that the argument is valid.
(e_card_set_id): Check that the argument is valid.
(e_card_get_book): Added. Return the EBook the ECard came from.
(e_card_get_uri): Added. Tries to returns a URI for the ECard,
which is of the form (EBook URI)/(ECard unique ID). Returns NULL
if the EBook URI or the ID are unknown/not set.
(e_card_get_vobject): If we have the URI, use it as the
VCUniqueStringProp, rather than just the ID. This is a hack to
make DnD work properly.
(parse_id): Detect if the unique ID we've been passed is a URI or
just a plain card ID, and do the right thing in either case.
(e_card_uri_extract_book_uri): Added. Convenience function for
parsing card URIs.
(e_card_uri_extract_card_id): Added. Convenience function for
parsing card URIs.
(e_card_load_uri): Added. Allows an ECard to be loaded by its
URI.
* backend/ebook/e-book-view.c: Added a EBook * to the
_EBookViewPrivate struct. This is meant to contain the EBook the
EBookView is associated with.
(add_book_iterator): Added. A convenience function for attaching
the EBook to a GList of cards (if no EBook is already stored).
(e_book_view_do_added_event): Record the EBook in the added
ECards.
(e_book_view_do_modified_event): Record the EBook in the modified
ECards.
(e_book_view_set_book): Added. Stores a pointer to the
EBookView's "parent" EBook.
(e_book_view_init): Init book_view->priv->book to NULL.
(e_book_view_destroy): Unref book_view->priv->book.
* backend/ebook/e-book.c: Added a uri field to _EBookPrivate.
(e_book_unqueue_op): Removed debugging spew.
(e_book_do_response_get_view): Attach the current EBook to the
created EBookView.
(e_book_do_response_get_changes): Attach the current EBook to the
created EBookView.
(e_book_load_uri): Save a copy of the uri in the EBook.
(e_book_get_uri): Added. Just returns book->priv->uri.
(e_book_get_card): Attach a pointer to the Ebook to the
newly-loaded ECard.
(e_book_add_card): Attach a pointer to the EBook to the
newly-added ECard.
(e_book_commit_card): Attach a pointer to the EBook to the
committed ECard.
(e_book_init): Initialize the uri to NULL.
(e_book_destroy): Free the uri string on destruction.
2001-07-06 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (populate_context_menu):
Removed. [It was just bogus testing code for the right-click menu
populating interface in the shell].
(factory_fn): Pass NULL as the PopulateContextMenuFn.
2001-07-05 Anna Marie Dirks <anna@ximian.com>
* gui/contact-list-editor/contact-list-editor.glade:
Added some accelerators, padding, and a "memebers" frame;
also fixed spacing and growth behaviour of this dialog.
2001-07-05 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-file.c (compare_category): Fix a memory
leak here.
2001-07-05 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-compare.c (match_search_info_free): Set
info->avoid = NULL. This shouldn't make a difference, but it
can't hurt.
2001-07-05 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-table-adapter.c
(addressbook_is_cell_editable): Check if the row is within our
table and return from this function as if the card is a standard
card, not a list.
2001-07-03 Damon Chaplin <damon@ximian.com>
* backend/ebook/Makefile.am (evolution_vcard_importer_LDADD):
added $(BONOBO_CONF_LIBS) to get it to compile.
2001-07-02 Christopher James Lahey <clahey@ximian.com>
* gui/component/Makefile.am (evolution_addressbook_LDADD): Added
$(BONOBO_CONF_LIBS).
* gui/component/select-names/e-select-names.c
(e_select_names_create_categories),
gui/contact-editor/e-contact-editor.c (categories_clicked):
Switched to an ECategoriesMasterListWombat instead of an
ECategoriesMasterListArray here.
2001-07-02 Peter Williams <peterw@ximian.com>
* gui/contact-editor/Makefile.am (INCLUDES): srcdir !=
builddir compile fix.
* gui/contact-list-editor/Makefile.am (INCLUDES): Same.
* gui/widgets/Makefile.am (INCLUDES): Same.
* gui/search/Makefile.am (INCLUDES): Same.
2001-07-02 Christopher James Lahey <clahey@ximian.com>
* gui/contact-editor/e-contact-editor.c (categories_clicked):
Turned off wombatification of the categories master list here.
2001-07-01 Chris Toshok <toshok@ximian.com>
* gui/contact-list-editor/e-contact-list-editor.c (fill_in_info):
use ECARD_UID_LINK_PREFIX.
* gui/contact-list-editor/e-contact-list-model.c
(e_contact_list_model_get_email): use ECARD_UID_LINK_PREFIX.
* backend/ebook/e-destination.h: add prototype for
e_destination_importv_list.
* backend/ebook/e-destination.c (e_destination_importv_list): new
function, take an ECard corresponding to an address list and
resolve any linked cards, returning an EDestination vector.
* backend/ebook/e-card.h (ECARD_UID_LINK_PREFIX): #define this here,
since we need to use it in a few places.
2001-07-02 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added
related_contacts field.
* gui/component/select-names/e-select-names-model.c,
gui/component/select-names/e-select-names-model.h
(e_select_names_model_import_destinationv): Added this function.
* gui/contact-editor/contact-editor.glade: Replaced the entry here
for related contacts with a table which is filled in in the C code.
* gui/contact-editor/e-contact-editor.c,
gui/contact-editor/e-contact-editor.h (add_lists): Added a select
names entry here for the related contacts field.
* gui/widgets/Makefile.am: Removed all the test programs here
since there are circular dependencies now.
2001-07-01 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-destination.c (e_destination_get_string): Fall
back to use the name field if all else fails (which can happen
with imported EDestinations).
* backend/ebook/e-destination.c (e_destination_is_empty): Fix for the
"recipient not specified" bug --- we were not correctly checking
for whether or not an EDestination was actually empty.
2001-06-30 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-card.c (e_card_evolution_list): Check args.
Somewhere in the code (somewhere in the minicard stuff) this can
be called with a NULL arg, which was causing crashes.
(e_card_evolution_list_show_addresses): Check args.
* backend/ebook/e-destination.c (build_field): I was accidentally
comparing characters and strings here, and didn't see the compiler
warning. Fixed.
(e_destination_exportv): Don't export any empty destinations.
(bug#3825).
2001-06-30 Zbigniew Chyla <cyba@gnome.pl>
* gui/component/e-address-popup.c (e_address_popup_construct): Marked
strings for translation.
2001-06-30 Jon Trowbridge <trow@ximian.com>
* gui/merging/e-card-merging.c (match_query_callback): Make the
standard for considering two cards to be match stricter.
* gui/component/select-names/e-select-names-completion.c
(make_match): Use the card's use-score to set the match's
sort_major value.
(match_name): Removed obsolete code.
(e_select_names_completion_begin): Added (double) cast to make
match->score calculation come out properly.
* backend/ebook/e-card.c: Added X-EVOLUTION-LAST-USE and
X-EVOLUTION-USE-SCORE to attribute_jump_array.
(e_card_get_today): Added. A convenience routine for getting
today's date and putting it in a GDate.
(e_card_get_use_score): Added. Compute the current, time-decayed,
use-score for the card.
(e_card_touch): Increment the use-score by one; update the last
used date.
(e_card_date_to_string): Added as a convenience routine, getting
rid of some code duplication.
(e_card_get_vobject): Add handlers for X-EVOLUTION-USE-SCORE and
X-EVOLUTION-LAST-USE.
(parse_last_use): Added.
(parse_use_score): Added.
(e_card_class_init): Added args for last-use and use-score.
(e_card_get_arg): Added handlers for last-use and use-score.
o
(e_card_set_arg): Added handlers for last-use and use-score.
* backend/ebook/e-destination.c: Added pending_card_id to
EDestinationPrivate struct.
(e_destination_copy): Copy the pending_card_id.
(e_destination_is_empty): Check for a pending_card_id. We are
non-empty if we have one.
(e_destination_clear_card): Clear pending_card_id.
(e_destination_set_card): Clear pending_card_id.
(e_destination_has_pending_card): Added.
(e_destination_use_card): Added. An asynchronous way to load a
pending card and then apply a callback to it.
(build_field): Be paranoid, map our special characters to '_'.
(e_destination_export): Use EXPORT_MAX_FIELDS symbol rather than a
hard-wired array size. Added the "card" entry.
(e_destination_import): Fix bug in handling of the "name" field.
Process the "card" field.
(e_destination_touch): "Touch" and commit the ECard corresponding
to the e-mail address in the destination. (A query against the
local addressbook is actually performed, in case the destination
isn't cardified.
* backend/ebook/e-card-compare.c (e_card_compare_name): Revamp the
way E_CARD_MATCH_FOO results are mapped to comparison results.
Report better matches when the family name is matched.
2001-06-29 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c (update_query):
Added a search field to the query here.
(e_select_names_init): Update the query on a number of signals here.
* gui/component/select-names/e-select-names.h: Added search_entry
here.
* gui/component/select-names/select-names.glade: Added the search
entry here. Added some labels. Removed the update button.
2001-06-29 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_option_activated): Change the uri here to have
addressbook.db at the end.
* gui/component/select-names/select-names.glade: Changed the name
of the folder option menu here to match the name used in the code.
2001-06-29 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c (update_query):
Change the query when the "Update List" button is pushed.
* gui/component/select-names/e-select-names.h: Removed
currently_selected field. Added categories_entry field.
* gui/component/select-names/select-names.glade: Added "Update
List" button.
2001-06-29 Chris Toshok <toshok@ximian.com>
* gui/widgets/Makefile.am (INCLUDES): add EVOLUTION_IMAGESDIR
define.
* gui/widgets/e-minicard.h (struct _EMinicard): add our pixbuf and
pixbuf size.
* gui/widgets/e-minicard.c (e_minicard_init): init the icon pixbuf
and its size.
(e_minicard_destroy): unref the list_icon_pixbuf.
(e_minicard_realize): create the list_icon GnomeCanvasPixbuf.
(e_minicard_resize_children): clip the header_text by the
list_icon, and place the list_icon in the right spot.
(remodel): show the list_icon if we're a list, and hide it
otherwise.
2001-06-28 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-view.c (table_double_click): pop up
list editor for lists, contact editor otherwise.
* gui/widgets/e-minicard.c (e_minicard_event): same.
* gui/widgets/e-minicard.h (struct _EMinicard): change "editor" to
GtkOjbect, since it can be either a contact editor or contact list
editor.
* gui/widgets/e-addressbook-table-adapter.c
(addressbook_is_cell_editable): don't allow editting of any fields
except the name and file_as for lists.
2001-06-28 Chris Toshok <toshok@ximian.com>
* gui/contact-list-editor/Makefile.am (INCLUDES): remove ancient
e-table include, and add include for contact-editor so we can
reuse the confirm_delete dialog.
* gui/contact-list-editor/e-contact-list-editor.h (struct
_EContactListEditor): remove prototype for
e_contact_list_editor_close, since the function no longer exists.
* gui/contact-list-editor/e-contact-list-editor.c
(list_deleted_cb): new function, emit our "list_deleted" signal.
(delete_cb): new function, called from the Delete toolbar item.
(e_contact_list_editor_raise): flesh out function.
(extract_info): "evolution_list" => "list".
(fill_in_info): same.
2001-06-28 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-card.c (e_card_get_vobject): add support for
X-EVOLUTION-LIST and X-EVOLUTION-LIST-SHOW-ADDRESSES.
(parse_list): new function, parse the boolean X-EVOLUTION-LIST.
(parse_list_show_addresses): new function, parse the boolean
X-EVOLUTION-LIST-SHOW-ADDRESSES.
(e_card_class_init): add args for "list" and
"list_show_addresses".
(e_card_set_arg): add support for list and list_show_addresses.
(e_card_get_arg): same.
(e_card_init): init list and list_show_addresses.
2001-06-27 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (factory_fn): Pass NULL as
the @external_uri_schemas argument to
`evolution_shell_component_new()'.
2001-06-27 Chris Toshok <toshok@ximian.com>
* gui/contact-list-editor/e-contact-list-model.c
(contact_list_row_count): track storage change - we're only using
1 array now.
(contact_list_value_at): same.
(contact_list_model_destroy): same.
(e_contact_list_model_init): same.
(e_contact_list_model_add_email): same.
(e_contact_list_model_add_card): same.
(e_contact_list_model_remove_row): same.
(e_contact_list_model_remove_all): new function - just free/unref
all existing rows.
(e_contact_list_model_get_email): new function, returns the
alloc'ed string containing either an email address or an encoded
ECardId.
* gui/contact-list-editor/e-contact-list-model.h: remove the 2
separate arrays for email and cards, and store them in the same
array.
* gui/contact-list-editor/e-contact-list-editor.h (struct
_EContactListEditor): add the visible_addr_checkbutton widget.
* gui/contact-list-editor/e-contact-list-editor.c
(visible_addrs_toggled_cb): new function.
(e_contact_list_editor_init): connect to "toggled" on
visible_addrs_checkbutton.
(file_save_cb): new function.
(tb_save_and_close_cb): new function.
(verbs): add Save and Save & Close.
(list_added_cb): new function.
(list_modified_cb): new function.
(save_card): new function - we do *not* use e_card_merging_* calls
here.
(e_contact_list_editor_get_arg): un-#if 0 code in the "card"
getter.
(e_contact_list_editor_set_arg): same for the "card" setter.
(extract_info): new function.
(fill_in_info): new function.
* gui/contact-list-editor/contact-list-editor.glade: add a
checkbutton at the bottom to determine whether to visibly include
mail addresses in mail sent to this list.
2001-06-26 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_create_categories): Oops. Can't use the wombat
version of the master categories list yet.
2001-06-26 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-table-adapter.c (create_card): memmove
counts were off in this function.
(remove_card, modify_card): Moved the table notifications around a
bit here.
2001-06-26 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names.c,
gui/component/select-names/e-select-names.h,
gui/component/select-names/select-names.glade
(e_select_names_create_categories): Added a categories combo here.
It's not used yet.
2001-06-26 Christopher James Lahey <clahey@ximian.com>
* gui/search/addresstypes.xml: Added category searching to the
advanced search dialog here.
2001-06-26 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-file.c (compare_category): Added
category searching to the file backend.
* gui/component/addressbook.c (addressbook_query_changed): Added
category searching to the search bar.
2001-06-25 Peter Williams <peterw@ximian.com>
* conduit/Makefile.am (INCLUDES): Fix for srcdir != builddir.
2001-06-25 Chris Toshok <toshok@ximian.com>
* gui/contact-list-editor/contact-list-editor.glade: change layout
slightly, the icon no longer pushes everything to the left, and
make the buttons on the right smaller and more in line with the
other widgets.
* gui/contact-list-editor/e-contact-list-model.c
(contact_list_value_at): return the SimpleAndString->string
instead of querying the ecardsimple.
(e_contact_list_model_init): initially allocate 10 of each type
(email and simple).
(e_contact_list_model_add_email): realloc if need be.
(e_contact_list_model_add_card): same, and initialize the string
displayed to be "[Name] [<email>]".
(e_contact_list_model_remove_row): change for SimpleAndString.
(contact_list_model_destroy): free our 2 arrays.
* gui/contact-list-editor/e-contact-list-model.h: add alloc counts
and the SimpleAndString struct.
* gui/contact-list-editor/e-contact-list-editor.c: Helix Code =>
Ximian.
(e_contact_list_editor_init): hook up d&d destination signals, and
un-#if 0 the delete_event signal.
(table_drag_motion_cb): new function.
(table_drag_drop_cb): new function.
(table_drag_data_received_cb): new function.
(file_close_cb): new function.
(verbs) uncomment the close verb.
(close_dialog): new function.
(app_delete_event_cb): new function.
* gui/contact-list-editor/e-contact-list-editor.h: Helix Code =>
Ximian.
2001-06-25 Jon Trowbridge <trow@ximian.com>
* gui/component/e-address-popup.c: Add a huge steaming pile of
code to handle the case of single-address merging. In other
words, if you go to "harvest" an address by right-clicking on it
in the mail viewer, and you already have a closely-matching
contact (w/ a different e-mail address), this gives you the
option of editting that contact's e-mail addresses to add the
one you just clicked on.
* backend/ebook/e-card-compare.c (match_search_info_free): It is
amazing how much better things work when you don't try to
dereference the pointer you just freed.
2001-06-24 Chris Toshok <toshok@ximian.com>
* gui/widgets/Makefile.am (minicard_test_LDADD): correct path to
libecontacteditor.a.
(minicard_widget_test_LDADD): same.
(INCLUDES): same, for the includes.
* gui/widgets/e-minicard.h: correct e-contact-editor.h path.
* gui/widgets/e-addressbook-util.h: correct path to
e-contact-editor.h, and add e-contact-list-editor.h. Add
prototype for e_addressbook_show_contact_list_editor.
* gui/widgets/e-addressbook-util.c: remove #include
"e-contact-editor.h" (our header includes it.)
(added_cb): rename card_added_cb to this, and make it so it can be
reused in both the list and card cases. remove the g_print too.
(modified_cb): same for modified case.
(deleted_cb): same for deleted case.
(editor_closed_cb): change first arg to GtkObject* so we can reuse
this for both list and card.
(e_addressbook_show_contact_editor): use added_cb, modified_cb,
deleted_cb, and pass FALSE as user_data.
(e_addressbook_show_contact_list_editor): new function, same as
above but creating a contact-list-editor, and pass TRUE as
user_data.
* gui/component/e-address-popup.c: correct path to contact-editor.
* gui/component/e-address-widget.c: same.
* gui/component/select-names/e-select-names-popup.c: same.
* gui/component/select-names/e-select-names-text-model.c: same.
* gui/component/addressbook.c (new_contact_list_cb): new function.
(update_command_state): update ContactNewList command.
(verbs): remove ViewAll from the toolbar from the verb list. Add
ContactNewList.
(pixmaps): same for pixmaps.
* gui/component/Makefile.am (evolution_addressbook_LDADD): new
path for contact-editor.
(INCLUDES): same.
* gui/contact-list-editor/e-contact-list-model.h:
* gui/contact-list-editor/e-contact-list-model.c:
* gui/contact-list-editor/e-contact-list-editor.h:
* gui/contact-list-editor/e-contact-list-editor.c:
* gui/contact-list-editor/Makefile.am: Initial contact-list editor
commit.
* gui/Makefile.am (SUBDIRS): add contact-editor.
* Makefile.am: (SUBDIRS): remove contact-editor.
2001-06-21 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-popup.c
(make_contact_editor_cb): Renamed. (The old name,
edit_contact_info_have_book_cb was a hold-over from before, when
we weren't using e_book_use_local_address_book.)
* gui/component/e-address-popup.c
(e_address_popup_schedule_refresh): A Added. We now do the name
refreshes in an idle function, rather than in the setters.
(e_address_popup_set_free_form): Added. Properly handle inputs of
the form "Foo <bar@zar.com>", extracting the name and e-mail
address.
(e_address_popup_set_name): Check to make sure that the free-form
handler shouldn't be used to handle the input. Schedule a refresh
after making any changes.
(e_address_popup_set_email): Check to make sure that the free-form
handler shouldn't be used to handle the input. Schedule a refresh
after making any changes.
(e_address_popup_name_only_matches): Temporary place-holder for
handling name-only matches.
(query_cb): If our initial query fails (and included e-mail
information), do a name-only query. This is to handle the case of
adding new e-mail addresses to existing contacts.
(e_address_popup_query): Eliminated the "common_book" crap; using
e_book_use_local_address_book instead.
* backend/ebook/e-card-compare.c (match_search_info_free): Make
sure that the ->avoid list gets properly freed.
2001-06-20 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_process_get_supported_fields): fix a refcounting
memleak.
2001-06-20 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book-listener.c
(e_book_listener_queue_get_supported_fields_response): fix memory
leak.
2001-06-20 Chris Toshok <toshok@ximian.com>
* contact-editor/e-contact-editor.c: add prototype for
close_dialog to remove warnings.
2001-06-20 Dave Camp <dave@ximian.com>
* backend/ebook/e-card.c (e_card_list_send): Changed attach_data
to be a GNOME_Evolution_Composer_AttachmentData rather than a
CORBA_char*.
2001-06-19 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-view.c (table_double_click): track
change to e_addressbook_show_contact_editor signature.
* gui/widgets/e-minicard-view.c (e_minicard_view_event): same.
* gui/widgets/e-minicard.c (e_minicard_event): same.
* gui/widgets/e-addressbook-util.c (e_addressbook_error_dialog):
add an entry for "Card ID already exists".
(e_addressbook_show_contact_editor): track the change to signal
names and e_contact_editor_new signature here.
* gui/widgets/e-addressbook-util.h: change
e_addressbook_show_contact_editor's signature to match
e_contact_editor_new more closely.
* gui/widgets/e-addressbook-table-adapter.c (unlink_model): free
up the simple mapping to plug a potentially sizeable memory leak.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_activate_obj): call
e_addressbook_show_contact_editor here.
* gui/component/select-names/e-select-names-popup.c
(edit_contact_info_have_book_cb): remove the get_supported_fields
stuff, since the contact editor handles it for us now, and call
e_addressbook_show_contact_editor.
* gui/component/e-address-popup.c (edit_contact_info_cb): same.
* gui/component/addressbook.c (new_contact_cb): track change to
e_addressbook_show_contact_editor.
2001-06-19 Chris Toshok <toshok@ximian.com>
* contact-editor/e-contact-quick-add.c (ce_have_book): rename
ce_book_found_fields to this, remove the fetching of fields (the
contact editor code handles that now.), and change the add_card
signal to card_added.
(card_added_cb): copied somewhat from merge_cb above. we don't
need to do the merge here, just call the callback.
* contact-editor/e-contact-editor.c (e_contact_editor_class_init):
track signal change. add book arg, and is_read_only -> editable.
(wants_html_changed): if the card isn't already changed, flag it
as such (and update the commands.)
(phone_entry_changed): same.
(email_entry_changed): same.
(address_text_changed): same.
(name_entry_changed): same.
(company_entry_changed): same.
(full_name_clicked): is_read_only -> editable.
(full_addr_clicked): same.
(card_added_cb): new function, emit our card_added signal, and
close the dialog if we're supposed to. properly deal with error
status here.
(card_modified_cb): same, modulo card_added -> card_modified.
(save_card): actually call e_card_merging_book_{add/commit}_card
instead of using a signal. Also, add a gboolean arg to tell
whether or not to close the dialog after saving the card.
(card_deleted_cb): new function, just emit our "card_deleted"
signal.
(delete_cb): actually call e_book_remove_card here, instead of
using a signal.
(tb_save_and_close_cb): call save_card with TRUE for should_close.
(e_contact_editor_init): init changed = FALSE;
(e_contact_editor_destroy): unref our book if we have one.
(e_contact_editor_new): new signature, set the "book" arg, and
call e_book_get_supported_fields here.
(supported_fields_cb): new function, show the contact editor.
(e_contact_editor_set_arg): initialize changed to FALSE when
setting the card (but *after*, since the changed callbacks will
set it to TRUE.) also, call command_state_changed if editable
changes. also handle setting "book". oh, and is_read_only ->
editable.
(command_state_changed): new function - set the state of the
commands we care about.
(e_contact_editor_get_arg): add "book" handling, and is_read_only
-> editable.
(_phone_arrow_pressed): is_read_only -> editable.
(_email_arrow_pressed): same.
(_address_arrow_pressed): same.
(enable_writable_fields): same.
(set_editable): rename set_read_only to this, and is_read_only ->
editable.
* contact-editor/e-contact-editor.h (struct _EContactEditor):
is_read_only -> editable, add a "changed" flag so we can sensitize
commands correctly, and add an EBook* arg to e_contact_editor_new
and to the EContactEditor struct. Also, change all the signals to
past tense, and send the EBookStatus in them.
* contact-editor/e-contact-editor-address.c
(e_contact_editor_address_class_init): is_read_only -> editable.
(e_contact_editor_address_set_arg): same.
(e_contact_editor_address_get_arg): same.
* contact-editor/e-contact-editor-address.h (struct
_EContactEditorAddress): same.
* contact-editor/e-contact-editor-fullname.c
(e_contact_editor_fullname_class_init): same.
(e_contact_editor_fullname_set_arg): same.
(e_contact_editor_fullname_get_arg): same.
* contact-editor/e-contact-editor-fullname.h (struct
_EContactEditorFullname): same.
* contact-editor/Makefile.am: don't build contact-editor-test now,
until contact-editor gets moved to gui/ and we can more easily
depend on the e_card_merging_* calls.
* backend/pas/pas-backend-ldap.c (ldap_error_to_response): return
CardIdAlreadyExists for LDAP_ALREADY_EXISTS.
* backend/idl/addressbook.idl: Add CardIdAlreadyExists to the
BookListener status enum.
* backend/ebook/e-book-types.h: add
E_BOOK_STATUS_CARD_ID_ALREADY_EXISTS.
* backend/ebook/e-book-listener.c
(e_book_listener_convert_status): add support for
CardIdAlreadyExists.
2001-06-19 Jon Trowbridge <trow@ximian.com>
* contact-editor/e-contact-quick-add.c: Serious de-crufting,
removal of gtk_object_set_data() hacks, simplified by using
some of the newer ebook convenience routines, etc.
(ce_book_found_fields):
s/e_contact_editor_raise/e_contact_editor_show/, to accomodate the
small changes in the contact editor API.
2001-06-18 Eskil Heyn Olsen <eskil@eskil.dk>
* conduit/address-conduit.c: (check_for_slow_setting),
(conduit_get_gpilot_conduit):
Tweaked for some gnome-pilot api changes
2001-06-15 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (search_for_dn): implement this
properly, using base and (objectclass=*).
2001-06-14 Chris Toshok <toshok@ximian.com>
* contact-editor/e-contact-editor.c (delete_cb): save ourselves a
function call - call close_dialog instead of file_close_cb.
2001-06-14 Jeffrey Stedfast <fejj@ximian.com>
* gui/component/addressbook-component.c: Set the
"expoted_dnd_types" to NULL in the folder_types.
2001-06-11 Dan Winship <danw@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(search_override_check): Add a workaround for an EText bug.
(e_select_names_completion_begin): Fix up the match scoring in the
search_override case so the lines are offered in the correct
order.
2001-06-11 Christopher James Lahey <clahey@ximian.com>
* gui/merging/Makefile.am (glade_DATA): Added
e-card-merging-book-commit-duplicate-detected.glade here.
* gui/merging/e-card-merging-book-commit-duplicate-detected.glade:
Added this file. The GUI for asking whether to commit a modified
card.
* gui/merging/e-card-merging.c, gui/merging/e-card-merging.h
(e_card_merging_book_commit_card): Added this function.
* gui/widgets/e-addressbook-table-adapter.c
(addressbook_set_value_at), gui/widgets/e-addressbook-util.c
(commit_card_cb), gui/widgets/e-minicard.c (e_minicard_event): Use
e_card_merging_book_commit_card instead of e_book_commit_card here.
2001-06-11 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
Made e_card_simple_get_id return const char *.
* backend/ebook/e-card.c, backend/ebook/e-card.h: Made
e_card_get_id return const char *.
* gui/component/e-cardlist-model.c (e_cardlist_model_add): Made id
variable const here. Added a break to make it slightly more
efficient.
* gui/widgets/e-minicard.c, gui/widgets/e-minicard.h: Made
e_minicard_get_card_id return const char *.
2001-06-11 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-file.c (entry_compare): Made this handle
the "id" property in searches.
(pas_backend_file_process_modify_card): Made id variable const
here.
* backend/pas/pas-backend-ldap.c (modify_card_handler): Made id
variable const here.
2001-06-11 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book-listener.c,
backend/ebook/e-book-listener.h, backend/ebook/e-book.c: Rolled
back the change 2 ago, dated 06/11/2001 01:51 in CVS, involving
e-book-listener.[ch] and e-book.c.
2001-06-11 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book.c (e_book_load_uri,
e_book_get_supported_fields, e_book_authenticate_user,
e_book_remove_card_by_id, e_book_add_vcard, e_book_commit_vcard,
e_book_get_cursor, e_book_get_book_view, e_book_get_changes): Made
it so that all of these functions queue their ops before calling
their CORBA functions. This way, if the response is sent back
before the CORBA function returns there's no problem. Added
e_book_unqueue_op so that the op could be unqueued if the CORBA
call fails.
2001-06-11 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book-listener.c, backend/ebook/e-book-listener.h
(e_book_listener_unpop_response): Added this function to put a
response back into the queue.
* backend/ebook/e-book.c (e_book_check_listener_queue,
e_book_queue_op): Handle the case where the op hasn't been queued
yet when we get the response. In this case we unpop the response.
Also, when queueing an op, we check to see if there are any
responses waiting.
* This change has been reverted.
2001-06-11 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-compare.c, backend/ebook/e-card-compare.h
(e_card_locate_match_full): Added this function to let you do
slightly more complicated searches.
* gui/merging/e-card-merging.c (e_card_merging_book_add_card): Use
e_card_locate_match_full to check if the card exists in the book
it's being added to instead of in the default book.
2001-06-09 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(match_name): Removed unused email variable.
2001-06-09 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-compare.c (use_common_book_cb): Null
terminate the strv here.
(e_card_locate_match): ref here instead of unref.
* backend/ebook/e-card-simple.c (e_card_simple_get): Handle a NULL
card here.
* contact-editor/Makefile.am (INCLUDES), gui/widgets/Makefile.am
(INCLUDES): Added addressbook/gui/merging here.
* contact-editor/e-contact-quick-add.c (book_ready_cb),
gui/component/addressbook-component.c (dnd_drop_book_open_cb),
gui/widgets/e-addressbook-table-adapter.c
(addressbook_append_row), gui/widgets/e-addressbook-util.c
(add_card_cb), gui/widgets/e-addressbook-view.c
(selection_received), gui/widgets/e-minicard-control.c
(book_open_cb): Use e_card_merging_book_add_card instead of
e_book_add_card here.
* gui/Makefile.am (SUBDIRS): Added merging.
* gui/component/Makefile.am (evolution_addressbook_LDADD),
gui/widgets/Makefile.am (minicard_test_LDADD,
minicard_widget_test_LDADD): Added libecardmerging.a here.
* gui/merging/, gui/merging/.cvsignore, gui/merging/Makefile.am:
New addressbook library.
* gui/merging/e-card-duplicate-detected.glade: Glade file for
duplicate detected dialog.
* gui/merging/e-card-merging.c, gui/merging/e-card-merging.h: New
files for detecting duplicates before adding and putting up a
dialog if duplicates are found.
* gui/widgets/e-minicard-view.c: Include e-addressbook-util.h
here.
2001-06-08 Chris Toshok <toshok@ximian.com>
* contact-editor/e-contact-editor.c (e_contact_editor_new): remove
the gtk_widget_show call...
(e_contact_editor_show): and put it here.
* contact-editor/e-contact-editor.h: add prototype for
e_contact_editor_show.
* gui/widgets/e-minicard.c (e_minicard_event): call
e_addressbook_show_contact_editor.
(card_modified_cb): call e_addressbook_error_dialog if status !=
SUCCESS.
* gui/widgets/e-minicard-view.c (e_minicard_view_event): call
e_addressbook_show_contact_editor. also, use card_modified_cb as
the commit_card callback.
* gui/widgets/e-addressbook-view.c (table_double_click): clean
this area up alot, call e_addressbook_show_contact_editor.
(card_deleted_cb): call e_addressbook_error_dialog.
* gui/widgets/e-addressbook-table-adapter.c
(card_modified_cb): new function, call e_addressbook_error_dialog
if the status != SUCCESS.
(addressbook_set_value_at): use card_modified_cb as the callback
for e_book_commit_card.
* gui/widgets/Makefile.am (libeminicard_a_SOURCES): add
e-addressbook-util.[ch].
* gui/component/addressbook.c (new_contact_cb): use
e_addressbook_show_contact_editor here.
2001-06-05 Christopher James Lahey <clahey@ximian.com>
* contact-editor/e-contact-editor.c (categories_clicked): Remove
references to ECategoryMasterListWombat.
2001-06-05 Jason Leach <jleach@ximian.com>
* gui/component/select-names/e-select-names.c (remove_cb): Make
this work when multiple names are selected then right
click->Remove.
2001-06-05 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card.c (e_card_set_arg): Copy dates as they come
in.
* backend/pas/pas-backend-file.c
(pas_backend_file_changes_foreach_key, pas_backend_file_changes,
pas_backend_file_process_remove_card,
pas_backend_file_process_modify_card,
pas_backend_file_build_all_cards_list, pas_backend_file_get_vcard,
pas_backend_file_maybe_upgrade_db): memset DBTs to 0 before using
them.
(pas_backend_file_build_all_cards_list): Reindented.
* contact-editor/contact-editor.glade: Replaced GnomeDateEdits
with a custom widget that creates an EDateEdit.
* contact-editor/e-contact-editor.c: Use an EDateEdit here instead
of a GnomeDateEdit.
2001-06-05 Jason Leach <jleach@ximian.com>
(Fix bug #655: SelectNames doesn't let you remove addresses after
you add them)
* gui/component/select-names/e-select-names.c
(section_right_click_cb): New function, provides a popup menu with
just "Remove" in it.
(remove_cb): New callback to do the remove.
(e_select_names_add_section): Attach the "right_click" signal to
the section_right_click_cb above.
2001-06-05 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-manager.c
(completion_handler): Change the completion handler to use the
ECompletionMatch.
* gui/component/select-names/e-select-names-completion.c
General changes to convert for ECompletionMatch use.
(emailify_match): Use extra sort keys in ECompletionMatch to let
us ensure that the primary email address is always the first
option, the secondary comes second, etc. There was no nice way to
do this previously.
(match_name): Removed code that adjusted score based on
similarities between the "real name" and the e-mail address. It
seemed like a good idea at the time, but produced unexpected and
confusing results.
2001-06-04 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-card-compare.c: Added. Code for testing
if two ECards appear to pertain to the same contact (using loose
matching rules, as opposed to requiring exact equality) and to
query the addressbook for the "best match" to ECard.
2001-06-03 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (set_status_message): remove spew,
and don't call the ShellView CORBA method if the interface doesn't
exist (for whatever reason.)
* gui/widgets/e-addressbook-view.c (e_addressbook_view_destroy):
unref the EAddressbookModel.
(create_minicard_view): unref the adapter.
(card_added_cb): call e_book_error_dialog if status != SUCCESS.
(card_modified_cb): same.
(card_removed_cb): new function, and same.
(delete_card_cb): pass card_removed_cb as the callback.
(emit_status_message): new function, just emit status_message.
(status_message): change to call emit_status_message.
(card_deleted_cb): emit_status_message ("Done."), and call
e_book_error_dialog if status != SUCCESS.
(do_remove): pass view in the closure arg.
(e_addressbook_view_delete_selection): emit status "Removing
cards..." before starting the removal.
(e_book_error_dialog): new function - pop up a (possibly) helpful
message about why an operation failed.
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_new): ref the EAddressbookReflowAdapter.
(e_minicard_view_widget_destroy): unref the adapter.
(e_minicard_view_widget_get_selection_model): if there isn't a
minicard view return NULL.
* gui/widgets/e-addressbook-table-adapter.c
(e_addressbook_table_adapter_construct): ref the
EAddressbookModel.
* gui/widgets/e-addressbook-reflow-adapter.c
(addressbook_finalize): rename this from addressbook_destroy, to
reflect the method change.
(e_addressbook_reflow_adapter_class_init): same.
(e_addressbook_reflow_adapter_construct): ref the
EAddressbookModel.
* gui/widgets/e-addressbook-model.h: add editable_set flag.
* gui/widgets/e-addressbook-model.c (writable_status): only record
the writable state of the addressbook if the user hasn't set it.
(e_addressbook_model_init): init editable_set to FALSE.
(e_addressbook_model_set_arg): set editable_set to TRUE.
2001-06-03 Ettore Perazzoli <ettore@ximian.com>
* backend/ebook/Makefile.am (evolution_vcard_importer_LDADD): Move
`$(DB3_LDADD)' before libeutil.
2001-06-01 Ettore Perazzoli <ettore@ximian.com>
* backend/ebook/Makefile.am (evolution_vcard_importer_LDADD): Add
$(DB3_LDADD)'.
2001-05-31 Christopher James Lahey <clahey@ximian.com>
* backend/pas/Makefile.am (INCLUDES): Added db3 cflags.
* backend/pas/pas-backend-file.c: Updated this to use db3.
2001-05-31 Federico Mena Quintero <federico@ximian.com>
* gui/widgets/e-addressbook-view.h (EAddressbookView): Added
fields for the GalViewMenus and GalViewCollection; we need to keep
them around while the component is active.
* gui/widgets/e-addressbook-view.c
(e_addressbook_view_setup_menus): Plug leak; unref the spec.
Unref the factories. Do not unref the collection, since we need
it for the signal emission (okay, so the views object adds a
reference to it, but if we are interested in it we should keep a
reference anyways).
(e_addressbook_view_setup_menus): Create the collection and views
on the EAddressbookView's fields so that we can keep them around.
(e_addressbook_view_discard_menus): New function; gets rid of the
collection and views objects.
* gui/component/addressbook.c (control_activate_cb): Call
e_addressbook_view_discard_menus().
2001-05-31 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names.h (struct
_ESelectNames): add the EAddressbookModel* and change the
ETableModel's name to "adapter".
* gui/component/select-names/e-select-names.c (set_book),
(addressbook_model_set_uri): these two things take an
EAddressbookModel* instead of an ETableModel now.
(e_addressbook_create_ebook_table): don't case the
EAddressbookModel* to ETableModel*, create an EAddressbookTableAdapter
on the EAddressbookModel instead.
(e_select_names_init): set e_select_names->adapter.
2001-05-31 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-model.c (remove_card): decrement
data_count before emitting the card_removed signal, and break
after we've removed the matching card.
(e_addressbook_model_class_init): change signature of
"card_removed" signal to match what we emit (and what is
expected.)
* gui/widgets/e-addressbook-view.c (e_addressbook_view_init): the
signal name is "destroy", not "destroyed".
(do_remove): new function, actually remove the card.
(e_addressbook_view_delete_selection): get this working for both
view types.
2001-05-31 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c: Print Preview =>
ContactsPrintPreview. Changed peter's change so that the node
name is more in line with "Print.."'s
2001-05-30 Peter Williams <peterw@ximian.com>
* gui/component/addressbook.c: Use the correct path to the print
preview menu item.
2001-05-30 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (cut_contacts_cb): new function, for
the Cut verb.
(copy_contacts_cb): new function, for the Copy verb.
(paste_contacts_cb): new function, for the Paste verb.
(select_all_contacts_cb): new function, for the Select All verb.
(update_command_state): add handling for sensitivity of
Cut/Copy/Paste/Select All.
* gui/widgets/e-addressbook-view.c (e_addressbook_view_init): init
the invisible and set up selection/destroy signals.
(get_selection_model): new function, so we can get the
ETableSelectionModel from either view type. makes lots of the
other functions easier, since we can get the list of selected
cards using the same code regardless of view type.
(invisible_destroyed): new function.
(selection_get): new function. convert the clipboard list to
string.
(selection_clear_event): new function - free up the list of
ECards.
(selection_received): if the selection data is valid and
well-formed, add the corresponding cards to the ebook.
(add_to_list): new function.
(get_selected_cards): new function.
(e_addressbook_view_cut): new function, implement in terms of
_copy and _delete_selection.
(e_addressbook_view_copy): claim ownership of the CLIPBOARD
selection after saving the list of selected ECards.
(e_addressbook_view_paste): call gtk_selection_convert.
(e_addressbook_view_select_all): new function, using
e_selection_model_select_all.
(e_addressbook_view_can_print): re-implement in terms of
get_selection_model.
(e_addressbook_view_can_delete): same.
(e_addressbook_view_can_cut): new function.
(e_addressbook_view_can_copy): new function.
(e_addressbook_view_can_paste): new function. hmm, always return
TRUE here.
(e_addressbook_view_can_select_all): new function.
* gui/widgets/e-addressbook-view.h (struct _EAddressbookView): add
selection stuff - the list of selected cards, and the GtkInvisible
selection owner, and add prototypes for
e_addressbook_view_[can]_{cut,copy,paste,select_all}.
* gui/widgets/e-minicard-view-widget.h: add a prototype for
e_minicard_view_widget_get_selection_model.
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_get_selection_model): new function.
2001-05-27 Dan Winship <danw@ximian.com>
* gui/component/addressbook.c: #include
"evolution-shell-component-utils.h" rather than "e-gui-utils.h"
for e_pixmaps_update.
2001-05-25 Peter Williams <peterw@ximian.com>
* gui/component/Makefile.am: Reference libeshell.la instead of
libeshell.a.
2001-05-25 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-reflow-adapter.c (addressbook_height):
Correct the height calculation here to not include the
E_CARD_SIMPLE_FIELD_FAMILY_NAME since it won't be displayed.
* gui/widgets/e-minicard.c (remodel): Changed this to continue to
be more consistent and simpler.
2001-05-23 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (view_destroy): fix strings such
that ones that happening at the beginning or during an operation
are followed by "..." and those that stop the operation are
followed by "."
(create_card_handler): same.
(ldap_op_process_current): same, and also call _notify_complete if
we can't connect to ldap server.
(poll_ldap): same, and change "Polling for LDAP search result" to
"Receiving LDAP search results"
* backend/pas/pas-backend-file.c (pas_backend_file_search): call
notify_status_message at the beginning of this function, and
whenever we call _notify_complete.
2001-05-23 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-addressbook-model.h: add sequence_complete_id to
EAddressbookModel and stop_state_changed to
EAddressbookModelClass. also, add prototype for
e_addressbook_model_can_stop.
* gui/widgets/e-addressbook-model.c (remove_book_view): disconnect
from "sequence_complete", and set search_in_progress to FALSE.
(sequence_complete): set search_in_progress to FALSE and emit
"stop_state_changed."
(e_addressbook_model_class_init): create the "stop_state_changed"
signal.
(e_addressbook_model_init): init stuff.
(book_view_loaded): connect to "sequence_complete" signal.
(book_view_loaded): set search_in_progress to TRUE and emit
"stop_state_changed"
(e_addressbook_model_stop): set search_in_progress to false, emit
"stop_state_changed", and set our status to "Search Interrupted."
(e_addressbook_model_can_stop): return search_in_progress.
* gui/widgets/e-addressbook-view.c (e_addressbook_view_init):
connect to the stop_state_changed signal on EAddressbookModel.
(stop_state_changed): new function.
(e_addressbook_view_can_stop): call e_addressbook_model_can_stop.
* gui/component/addressbook.c (update_command_state): use
e_addressbook_view_can_stop to set the sensitivity of the stop
button.
2001-05-22 Dan Winship <danw@ximian.com>
* backend/ebook/e-book-listener.c (e_book_listener_check_queue):
ref the listener for the duration of this function, since emitting
"responses_queued" may cause it to be unreffed by its EBook in
some cases, which could cause the second response_queue check to
look at garbage data if it got destroyed.
(e_book_listener_destroy): Call g_source_remove if idle_id is set.
2001-05-22 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c: track the change in
evolution-addressbook.xml's bonobo ui path's.
2001-05-21 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (change_view_type): update_view_type
is gone, since the menu item is gone.
* gui/widgets/e-addressbook-table-adapter.c (create_card): use
e_table_model_rows_inserted here.
2001-05-20 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook-config.c
(addressbook_source_item_new): Removed an unused variable.
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): Made text here non-const.
* gui/component/select-names/e-select-names-popup.c
(edit_contact_info_cb): Cast to a gpointer here.
* gui/component/select-names/e-select-names.c
(e_addressbook_create_ebook_table): Cast to E_TABLE_MODEL here.
2001-05-18 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(match_name): Do a better job constructing match strings, so we
never try to use a segment of the name that isn't there (resulting
in ugly (null)'s in the string). Boost our score if some part of
the name also matches the front part of the e-mail address, so the
name match will always trump the e-mail match.
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): Return the serialized EDestinations
(rather than just a string w/ e-mail addresses) through the bonobo
component's property bag.
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_export_destinationv): Added. A convenience routine
for serializing the model's EDestinations into a string.
* gui/component/select-names/e-select-names-popup.c
(add_html_mail): Added. Puts in a check menu item for whether or
not the recipient wants HTML mail.
(popup_menu_card): Add menu item for HTML mail. Enable edit
contact info item.
(popup_menu_nocard): Add menu item for HTML mail. Enable edit
contact info item.
* backend/ebook/e-book-util.c (e_book_use_local_address_book):
Added. Fetches the local addressbook and caches it on the first
call. This is meant to be an easy and efficient way to get at the
local addressbook with the minimum of code.
(e_book_query_address_locally): Added. Convenience code that
does an e-mail only e_book_name_and_email_query against the
local address book.
* backend/ebook/e-destination.c
(e_destination_set_html_mail_pref): Added. Allows the intended
recipient's HTML mail preference to be manipulated.
(e_destination_get_email_verbose): Added. Cleaned up to use
e_destination_get_name.
(e_destination_get_html_mail_pref): Added. Read the recipient's HTML mail
preference. If the destination is linked to a card, the
preference is taken from the card (unless it has been explicitly
overridden by a called to e_destination_set_html_mail_pref).
(e_destination_get_address_textv): Added. Form a unified address string
from a NULL-terminated vector of EDestinations.
(e_destination_export): Added. Serialize an EDestination to a string.
(e_destination_import): Added. Unserialize a string to build an
EDestination.
(e_destination_exportv): Added. Serialize a NULL-terminated vector of
EDestinations to a string.
(e_destination_importv): Added. Unserialize a string to build a
NULL-terminated vector of EDestinations.
* gui/component/select-names/e-select-names-completion.c:
Implemented local versions of g_strcasecmp and g_strncasecmp
(which should really be in glib, I think...) for utf8, and used
them to make this code utf8-safe.
2001-05-17 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (update_command_state): no more
ContactFind command.
2001-05-17 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_class_init): add our selection_change
signal.
(e_minicard_view_widget_realize): connect to the ESelectionModel's
selection_changed signal.
(e_minicard_view_widget_selected_count): new function.
(selection_change): new function - emit our "selection_change"
signal.
* gui/widgets/e-minicard-view-widget.h (struct
_EMinicardViewWidgetClass): add selection_change signal. also,
add prototype for e_minicard_view_widget_selected_count.
* gui/widgets/e-addressbook-view.c
(e_addressbook_view_class_init): add our command_state_change
signal.
(e_addressbook_view_init): connect to the writable_status signal
on the EAddressbookModel.
(minicard_selection_change): new function - calls
command_state_change.
(create_minicard_view): connect to selection_change on the
minicard_view so we know when to update command state.
(table_selection_change): new function - calls
command_state_change.
(writable_status): new function - calls command_state_change.
(command_state_change): new function - emits our
"command_state_change" signal.
(create_table_view): connect to the selection_change signal so we
know to update the command state.
(change_view_type): update the command state every time we change
view types.
(e_addressbook_view_can_create): new function.
(e_addressbook_view_can_print): new function.
(e_addressbook_view_can_delete): new function.
(e_addressbook_view_can_stop): new function.
* gui/widgets/e-addressbook-view.h (struct
_EAddressbookViewClass): add command_state_change signal, and
prototypes of functions the component can use to test the state of
commands.
* gui/widgets/e-addressbook-model.c (addressbook_destroy): unlink
the writable_status signal on the EBook.
(writable_status): new function.
(e_addressbook_model_class_init): add our writable_status signal.
(e_addressbook_model_init): init writable_status_id.
(e_addressbook_model_set_arg): unlink the writable_status signal
on the old EBook, and connect it on the new one.
* gui/widgets/e-addressbook-model.h: add writable_status signal.
* gui/component/addressbook.c (update_command_state): new
function, set the sensitivity of the bonobo commands.
(control_activate): update our command state immediately upon
activating the control.
(addressbook_factory_new_control): register command_state_change
to update the commands.
2001-05-15 Chris Toshok <toshok@ximian.com>
* gui/search/e-addressbook-search-dialog.c
(e_addressbook_search_dialog_init): initialize the model and
adapter.
(button_press): set on the model.
(e_addressbook_search_dialog_new): same.
(e_addressbook_search_dialog_set_arg): same.
(e_addressbook_search_dialog_destroy): unref the model and
adapter.
* gui/search/e-addressbook-search-dialog.h (struct
_EAddressbookSearchDialog): add our model and reflow adapter.
2001-05-16 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-minicard-view.c: (e_minicard_view_destroy): Fixed
up the lifetime of the drag_data_get signal a bit.
2001-05-15 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard-view.c (add_to_list): MinicardViewModel
-> ReflowAdapter name change.
(get_card_list): same.
(e_minicard_view_drag_begin): same.
(supported_fields_cb): model -> adapter.
(adapter_changed): hook up signals and set the empty message on
our adapter.
(e_minicard_view_set_arg): add support for "adapter", and set
model -> adapter.
(e_minicard_view_get_arg): same.
(disconnect_signals): no more status_message.
(do_remove): track to use adapter.
(e_minicard_view_class_init): add adapter arg, and remove
status_message.
(e_minicard_view_init): all the code here is in adapter_changed
now.
* gui/widgets/e-minicard-view.h (struct _EMinicardView):
EMinicardViewModel -> EAddressbookReflowAdapter.
(struct _EMinicardViewClass): get rid of status_message.
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_class_init): remove the status_message
signal.
(e_minicard_view_widget_new): take the adapter as our argument,
and store it away for when we create the view.
(e_minicard_view_widget_realize): when we create the view just set
the adapter field on it. also, don't connect to status_message.
* gui/widgets/e-minicard-view-widget.h (struct
_EMinicardViewWidget): add our adapter here, so we can pass it
into the view when we create it.
(struct _EMinicardViewWidgetClass): remove status_message.
* gui/widgets/e-addressbook-view.c (status_message): new function,
no more propagating status messages!
(e_addressbook_view_init): create our model and conenct to its
status_message signal.
(book_writable_cb): set "editable" on the model, not our object.
(e_addressbook_view_set_arg): same, but with "book" and "query" as
well.
(create_minicard_view): create our reflow adapter and pass it to
the minicard view widget. also, call e_reflow_model_changed so
it'll pick up any already present cards.
(table_double_click): ADDRESSBOOK_MODEL -> TABLE_ADAPTER.
(get_card_list_1): remove the cast, since we don't need it any
longer.
(table_right_click): ADDRESSBOOK_MODEL -> TABLE_ADAPTER.
(table_drag_data_get): same.
(create_table_view): create the table adapter, and use it as our
ETableModel.
(change_view_type): remove the status_message hook up and setting
of query/book/editable.
(e_addressbook_view_stop): just call e_addressbook_model_stop here
instead of switching on the view type.
* gui/widgets/e-addressbook-view.h (struct _EAddressbookView): add
our EAddressbookModel.
* gui/widgets/Makefile.am (libeminicard_a_SOURCES): add the
adapter files, and remove e-minicard-view-model.[ch].
* gui/widgets/e-minicard-view-model.[ch]: removed.
* gui/widgets/e-addressbook-table-adapter.c: new file.
* gui/widgets/e-addressbook-table-adapter.h: new file.
* gui/widgets/e-addressbook-reflow-adapter.c: new file.
* gui/widgets/e-addressbook-reflow-adapter.h: new file.
* gui/widgets/e-addressbook-model.c: rework this class to now
subclass from ETableModel anymore. It not subclasses from
GtkObject, and we use table and reflow adapters to get at the
data.
* gui/widgets/e-addressbook-model.h: same.
2001-05-14 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-minicard-view-model.c (remove_card): Fix a small
error not decreasing the data_count here.
2001-05-13 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.h: add prototype for
addressbook_expand_uri.
* gui/component/addressbook-component.c
(destination_folder_handle_drop): create an EBook for
@physical_uri.
(dnd_drop_book_open_cb): actually add the dropped cards.
* gui/component/addressbook.c (addressbook_expand_uri): abstract
this code out from the set_prop method so we can use it in the
component.
(set_prop): call addressbook_expand_uri.
* backend/ebook/e-card.c (e_card_load_cards_from_string): new
function.
* backend/ebook/e-card.h: add prototype for
e_card_load_cards_from_string.
2001-05-12 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-component.c
(destination_folder_handle_drop): spew the data passed to us.
(destination_folder_handle_motion): the suggested_action is not an
ActionSet, but an Action, so don't or together multiple actions.
2001-05-11 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c (addressbook_source_dialog):
correct bug causing the Ok button to never be enabled.
2001-05-11 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-component.c (populate_context_menu):
example.
2001-05-11 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard-view.c (e_minicard_view_drag_data_get):
use e_card_list_get_vcard to build up the data to send.
(e_minicard_view_init): connect to the model's drag_begin signal.
(e_minicard_view_drag_begin): gather the list of cards being
dragged and call gtk_drag_begin.
(add_to_list): new function.
(get_card_list): same.
(disconnect_signals): disconnect the drag_data_get signal.
(e_minicard_view_init): connect to the drag_begin signal on our
model.
* gui/widgets/e-minicard-view.h (struct _EMinicardView): change
drag_card to drag_list.
* gui/widgets/e-minicard-view-model.c (minicard_drag_begin): new
function, emit our drag_begin signal.
(addressbook_incarnate): connect to the item's drag_begin signal.
(e_minicard_view_model_class_init): init our drag_begin signal.
* gui/widgets/e-minicard-view-model.h: add drag_begin signal.
* gui/component/addressbook-config.c (addressbook_source_dialog):
always loop through all source types here, making LDAP first so
it's forces as the first notebook item.
(addressbook_config_auth_label): remove SASL case.
(addressbook_source_edit_changed): same.
(addressbook_source_item_new): flag the area of code that needs to
go into the advanced dialog (if we add one before someone
graciously redesigns the entire addressbook gui :)
* gui/component/addressbook-storage.c (ldap_unparse_auth): remove
SASL case.
(ldap_parse_auth): same.
* gui/component/addressbook-storage.h: make LDAP come first in our
source type enumeration, and remove the SASL auth type.
2001-05-11 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card.c (e_card_set_arg): If the name is set and
the full_name or file_as haven't been yet, set them.
2001-05-11 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-file.c: Reordered the includes here.
(string_to_dbt): The sleepycat libdb documentation suggests
memseting the DBT to 0 so we do that here.
* gui/widgets/e-minicard-view-model.c (addressbook_height): Skip
the E_CARD_SIMPLE_FIELD_FAMILY_NAME field.
* gui/widgets/e-minicard.c (remodel): Skip the
E_CARD_SIMPLE_FIELD_FAMILY_NAME field.
2001-05-11 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_connect): only
check schema support if we've connected.
2001-05-11 Chris Toshok <toshok@ximian.com>
* contact-editor/e-contact-editor.c (enable_writable_fields):
don't leak the ECard or ECardSimple.
2001-05-08 Iain Holmes <iain@ximian.com>
* backend/ebook/GNOME_Evolution_Addressbook_VCard_Importer.oaf.in:
Renamed the GnomeCard_Importer.oaf.in to this, and change the IID.
* Makefile.am: Rename all the GnomeCard to VCard.
* evolution-vcard-importer.c: Make the GnomeCard a generic
vcard importer.
2001-05-08 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/Makefile.am (libebookinclude_HEADERS): Removed
e-card-pairs.h since we're not using it.
* backend/ebook/e-book-view.c (e_book_view_check_listener_queue):
Added break; to default: case here.
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
Added changed variable so as to avoid sync_card when possible.
(e_card_simple_destroy): Free all the data here properly.
(e_card_simple_get_arg): Slight simplification here.
(fill_in_info, e_card_simple_arbitrary_foreach,
e_card_simple_get_arbitrary): Call e_card_free_empty_lists here to
save a bit of memory.
* backend/ebook/e-card.c, backend/ebook/e-card.h: Fixed up
includes a bit.
(e_card_list_get_vcard, e_card_list_send): Added these functions
for acting on a group of cards.
(parse_org): Cleaned up this function a bit.
(e_card_free_empty_lists): Added this function to delete
unnecessary ELists and save a bit of memory.
(e_v_object_get_child_value): Made this return NULL if not found
instead of g_strdup("").
* contact-editor/e-contact-save-as.c,
contact-editor/e-contact-save-as.h (e_contact_list_save_as): Added
this function to save multiple contacts.
* gui/widgets/Makefile.am: Commented out reflow test.
(libeminicard_a_SOURCES): Added e-minicard-view-model.c and
e-minicard-view-model.h.
* gui/widgets/e-minicard-view-model.c,
gui/widgets/e-minicard-view-model.h: Model for use in
EMinicardView.
* gui/widgets/e-minicard-view.c, gui/widgets/e-minicard-view.h:
Reworked this to use the new EReflow stuff.
* gui/widgets/e-minicard.c (e_minicard_event): Doesn't handle
right click menus now. Emits a signal on the parent canvas item
instead.
* printing/e-contact-print-envelope.c,
printing/e-contact-print-envelope.h
(e_contact_print_envelope_list_dialog_new): Added this function to
print multiple envelopes (only prints first for now.)
* printing/e-contact-print.c, printing/e-contact-print.h
(e_contact_print_card_list_dialog_new): Added this function to
print multiple cards. Only prints the first for now.
2001-05-07 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-component.c (remove_folder): flesh out
the function more. It should work now, but there's no way to
invoke this method from the ui at the moment, heh.
2001-05-07 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook.c (book_open_cb): Use a different
error message in the ldap support/no ldap support/file cases.
2001-05-07 Gediminas Paulauskas <menesis@delfi.lt>
* gui/component/addressbook.c: use define from
widgets/misc/e-filter-bar.h instead of own enumeration and search menu
names.
* gui/component/Makefile.am, gui/component/select-names/Makefile.am:
removed EVOLUTION_VERSION.
2001-05-04 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-component.c (remove_folder): un-#if 0
this.
(xfer_folder): add skeleton code to validate xfer request. always
notifies with PERMISSION_DENIED at present.
(populate_context_menu): un-#if 0 this.
(get_dnd_selection): same.
(destination_folder_handle_motion): new function.
(destination_folder_handle_drop): new function.
(factory_fn): create a EvolutionShellComponentDndDestinationFolder
interface, and add it to our shell component.
2001-05-04 JP Rosevear <jpr@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_process_get_book_view): init change_id to NULL
2001-05-02 JP Rosevear <jpr@ximian.com>
* gui/component/addressbook.c (addressbook_view_free): unref the
book if the view is being destroyed
* backend/pas/pas-backend-file.c
(pas_backend_file_process_get_book_view): unref the book_view when
we are finished, it is only interesting if someone else has reffed
it now (weak reference)
(pas_backend_file_add_client): unref the book for the same reason
as above
* Fixes bug #2255
2001-04-30 JP Rosevear <jpr@ximian.com>
* backend/pas/pas-backend-file.c (vcard_matches_search): if the
view does not contain a search context, the result is by default
false fixes #2470
2001-04-25 Dan Winship <danw@ximian.com>
* gui/component/addressbook-factory.c (main): Remove call to
unicode_init.
2001-04-23 Jon Trowbridge <trow@ximian.com>
* gui/component/e-address-popup.c: Lots of code has been
simplified here.
(e_address_popup_factory_new_control): Rather than directly pop
our control up in a window (via the e_address_popup_popup
function, which is now gone), just return the widget and let the
caller do the popping. This works better, since it means we don't
have to work around the vagaries of bonobo focus & event handling.
(e_address_popup_set_name): Refresh when both name & email have
been set, rather than checking a stupid counter.
(e_address_popup_set_email): Ditto.
2001-04-22 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook-storage.c
(addressbook_storage_clear_sources): Added save_source_data here.
2001-04-21 Jon Trowbridge <trow@ximian.com>
* contact-editor/e-contact-quick-add.c (clicked_cb): Properly
convert to utf8. (Bug #2256)
(build_quick_add_dialog): Properly convert from utf8. (Bug #2256)
2001-04-16 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-destination.c (e_destination_get_name): Added.
* gui/component/select-names/e-select-names.c
(real_add_address_cb): Use e_select_names_model_append. It's
nicer.
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_append): Added.
* gui/component/select-names/e-select-names-completion.c
(book_query_process_card_list): Filter out completion matches that
don't have an associated e-mail address.
(book_query_score): Give a bonus to the primary address, so that
it always comes up first in the completion results.
* gui/component/e-address-popup.c (e_address_popup_refresh_names):
Convert utf8 strings into gtk strings before displaying.
2001-04-14 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book-view-listener.c,
backend/ebook/e-book-view-listener.h: Added the function
e_book_view_listener_stop to tell the book view listener to stop
sending signals.
* backend/ebook/e-book-view.c (e_book_view_destroy): Tell the
EBookViewListener to stop when we're destroyed.
* backend/pas/pas-backend-file.c (view_destroy,
pas_backend_file_process_get_book_view,
pas_backend_file_process_get_changes): Cleaned these up a bit
using bonobo_object_ref and bonobo_object_unref.
(pas_backend_file_process_get_book_view,
pas_backend_file_process_get_changes): bonobo_object_release_unref
the EBookListener here.
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_process_get_book_view): Cleaned this up a bit
using bonobo_object_ref. Make sure to unref the listener when
we're done with it. Put the new book_view in the list before
telling the book_listener that it's ready.
* backend/pas/pas-book-view.c (pas_book_view_construct): Cleaned
this up a bit using bonobo_object_dup_ref.
(pas_book_view_destroy): Cleaned this up a bit using
bonobo_object_release_unref.
* backend/pas/pas-book.c (pas_book_queue_get_book_view,
pas_book_queue_get_changes): bonobo_object_dup_ref here instead of
just duplicating.
2001-04-14 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-book-listener.c
(impl_BookListener_respond_get_cursor): Ref the cursor here when
we receive it.
(impl_BookListener_respond_get_view,
impl_BookListener_respond_get_changes): Ref the book_view here
when we receive it.
(impl_BookListener_respond_open_book): Ref the book here when we
receive it.
(e_book_listener_destroy): Unref the objects in our queue here.
* backend/ebook/e-book-view.c (e_book_view_construct): Cleaned
this up using bonobo_object_dup_ref.
(e_book_view_destroy): Cleaned this up using
bonobo_object_release_unref.
* backend/ebook/e-book.c (e_book_do_response_get_cursor,
e_book_do_response_get_view, e_book_do_response_get_changes,
e_book_unload_uri): Cleaned this up using
bonobo_object_release_unref.
2001-04-13 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): Get the ESelectNamesModel from the
widget's text model instead of storing it as a gtk_object_set_data
since it may change.
2001-04-12 Jason Leach <jasonleach@usa.net>
* backend/pas/pas-backend-file.c (INITIAL_VCARD): Update the Voice
and Fax phone numbers too, finishing off bug #1667.
2001-04-11 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-file.c (INITIAL_VCARD): Update the built
in VCard.
2001-04-12 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (local_record_from_ecard): put the
business address into the pilot record as that is what we put into
the desktop record
(ecard_from_remote_record): set both the address label and
delivery address to avoid bad parser guessing, fixes #2143
* backend/ebook/e-card-types.h: remove deprecated pilot code
* backend/ebook/e-card.c: ditto
* backend/ebook/e-card.h: ditto
2001-04-11 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (local_record_from_ecard): Don't add
more than five phone numbers and set the remaining blank entries
to some reasonable defaults
2001-04-11 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.h: Added
E_CARD_SIMPLE_FIELD_LAST_SIMPLE_STRING.
* gui/component/addressbook-component.c (accepted_dnd_types):
Fixed a warning here.
* gui/widgets/e-addressbook-model.c: Modified this to have more
columns, but not let them be edited if they're not a simple
string.
* gui/widgets/e-minicard-view.c (e_minicard_view_init): Fixed a
warning and a memory leak here.
2001-04-10 Gediminas Paulauskas <menesis@delfi.lt>
* backend/ebook/evolution-gnomecard-importer.c: added missing #include.
* contact-editor/e-contact-editor.c (_arrow_pressed): popup menu items were
not translated after selecting one of them.
* gui/widgets/e-addressbook-view.c: mark popup menu items with N_().
Updated list[] for translators.
* gui/widgets/e-minicard.c: same.
* gui/widgets/e-minicard-view-widget.c (e_minicard_view_widget_set_arg): fix warning
for "editable" arg.
* gui/widgets/e-minicard-view.c: convert "empty_message" to utf8.
2001-04-09 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-component.c (remove_folder): stubbed,
#if 0'ed
(xfer_folder): same.
(populate_context_menu): same.
(get_dnd_selection): same.
(factory_fn): add the accepted drag types ("text/x-vard") to
folder_types.
2001-04-09 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard.c (e_minicard_event): on BUTTON_PRESS: if
it's button 1, store the button x, y, and set drag_button_down to
TRUE. on BUTTON_RELEASE: always set drag_button_down to FALSE.
for MOTION_NOTIFY: initiate drag if the pointer has moved 3
pixels.
* gui/widgets/e-minicard.h (struct _EMinicard): add fields for
button x, y, and a bit for if the button has been pressed so we
can tell whether a motion should be a drag.
(struct _EMinicardClass): add drag_begin signal.
* gui/widgets/e-minicard-view.c (e_minicard_view_drag_begin): new
function, starts the drag.
(book_view_loaded): connect the "drag_data_get" signal.
(e_minicard_view_drag_data_get): new function.
* gui/widgets/e-minicard-view.h (struct _EMinicardView): add
drag_card and id for canvas_drag_data_get_id.
* gui/widgets/e-addressbook-view.c (table_drag_data_get): new
function.
(create_table_view): add d&d stuff.
2001-04-08 Chris Toshok <toshok@ximian.com>
* printing/e-contact-print.c: add #include <sys/types.h> since
gnome-print.h uses time_t without including it. this really
should be fixed in gnome-print.
2001-04-08 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_add_client):
make sure to notify new clients to the writable status of an
already open (and authenticated) book.
2001-04-04 Kjartan Maraas <kmaraas@gnome.org>
* contact-editor/e-contact-editor.[ch]: Fix headers.
* component/addressbook-storage.c: Same here.
* gui/search/e-addressbook-search-dialog.c: Same here.
* gui/widgets/e-addressbook-view.c: Same here.
* gui/widgets/e-minicard-label.c: Same here.
* gui/widgets/e-minicard-view-widget.c: Same here.
* gui/widgets/e-minicard-view.c: Same here.
* gui/widgets/e-minicard-widget-test.c: Same here.
* gui/widgets/e-minicard-widget.c: Same here.
* gui/widgets/e-minicard.c: Same here.
* gui/widgets/test-minicard-label.c: Same here.
2001-04-03 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c (table_double_click): Fixed a
crash here.
2001-04-03 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-model.c (COLS): Made this table model
more consistent in the number of columns it has.
(addressbook_append_row): Fixed this function. We removed the col
offset.
2001-04-02 Iain Holmes <iain@ximian.com>
* backend/ebook/evolution-gnomecard-importer.c (importer_init): Shut
down and unregister the factory on exit.
2001-04-01 Gediminas Paulauskas <menesis@delfi.lt>
* contact-editor/contact-editor.glade: changed icon to
evolution-contacts-plain.png.
* gui/component/addressbook.c: use new pixmap cache. Added icon for new
contact, print, print preview, changed filenames of renamed icons.
2001-03-31 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names.c
(real_add_address_cb): Call e_select_names_model_clean after
adding address. This should deal with the bug reports related
to stray commas.
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_clean): Added. Remove all empty destinations.
* backend/ebook/e-destination.c (e_destination_is_empty): Added. Check
if an EDestination is in essentially a null state.
2001-03-30 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-file.c (pas_backend_file_add_client):
Tell new clients that are added whether they're writable.
2001-03-29 Jon Trowbridge <trow@ximian.com>
* printing/e-contact-print.c: Added #include <libgnome/gnome-paper.h>
* printing/e-contact-print-envelope.c: Added #include <time.h>
and #include <libgnome/gnome-paper.h>
2001-04-03 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(match_email): Better handle matching of "nameless" contacts.
* backend/ebook/e-destination.c (e_destination_get_string): Better
handle the case of a "nameless" contact.
2001-03-29 Kjartan Maraas <kmaraas@gnome.org>
* *.*: Clean up #includes. Replace <gnome.h>, <bonobo.h> and
<gtk/gtk.h> with more finegrained headers where needed.
2001-03-28 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card.c (e_card_set_arg): Fixed some crashes.
2001-03-28 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names-table-model.c
(fill_in_info): Use E_CARD_SIMPLE_FIELD_NAME_OR_ORG instead of
getting the NAME and then the ORG. That way if we expand
NAME_OR_ORG, this will use it.
* gui/component/select-names/e-select-names.c
(e_addressbook_create_ebook_table, SPEC): Use the correct column
in the SPEC.
2001-03-25 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_seq_complete_cb): Rather than starting
the pending query by directly calling
e_select_names_completion_do_query, call
e_completion_begin_search. Circumventing the ECompletion API was
causing it to get confused in some cases.
2001-03-23 Jon Trowbridge <trow@ximian.com>
* gui/widgets/e-minicard-widget.c (e_minicard_widget_set_card):
Added. Call me old-fashioned, but I just prefer to have a real
API rather than doing everything via gtk_object_get/set-type
calls.
(e_minicard_widget_set_arg): Changed to call
e_minicard_widget_set_card.
* backend/ebook/e-book-util.c: Small changes to get rid of
compiler warnings. (Casting out const, removed unused variables,
etc.) Removed some debugging messages.
* gui/component/addressbook-factory.c (main): Added call
to e_address_popup_factory_init.
* gui/component/e-address-popup.c: Added. A popup gadget that is
invoked (as a bonobo control) when an address is left-clicked in
the mailer. The addressbook is queries, and the address is either
displayed as a minicard (if it already exists) or in a "generic
format". A button is provided for editting/adding the contact.
Some of the semantics of this widget are a bit... non-standard,
because of bonobo issues. I can't really seem to replicate
popup-menu behavior because of how bonobo propogates events, etc.
so I've tried to produce something that I think is non-annoying.
YMMV.
2001-03-22 Iain Holmes <iain@ximian.com>
* backend/ebook/evolution-gnomecard-importer.c: Update to the new
IDL.
2001-03-20 Miguel de Icaza <miguel@ximian.com>
* gui/component/addressbook.c (update_pixmaps): Added artwork from
Jakub.
2001-03-19 Christopher James Lahey <clahey@ximian.com>
* Merged branch:
2001-03-14 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-minicard-view.c: Call
e_selection_model_simple_insert_rows and
e_selection_model_simple_delete_rows instead of
e_selection_model_simple_insert_row and
e_selection_model_simple_delete_row.
End of branch
2001-03-17 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c: Brutally
refactored to boost performance in large-addressbook situations.
These fixes give accepable performance (even with the suboptimal
pas-backend-file searching) using tigert's addressbook-of-death.
* backend/pas/pas-backend-file.c (pas_backend_file_search):
Start feeding query matches back to the caller before the
entire search is complete; this gives us some "instant feedback"
rather than causing evolution to totally lock up...
* backend/ebook/e-book.c (e_book_queue_op): Tag all queued ops.
(e_book_cancel_op): Added. Search for a pending op with a given
tag, and mark it as inactive.
(e_book_do_response_get_cursor): Don't execute callback if this
operations has been cancelled.
(e_book_do_response_get_view): Ditto.
(e_book_do_response_get_changes): Ditto.
(e_book_do_response_get_supported_fields): Ditto.
(e_book_get_supported_fields): Return an operation tag (that can
be used to cancel the operation) rather than just TRUE/FALSE.
Zero is always an invalid tag and is returned in the case of an
error, so this shouldn't break any code that looked at the return
value (unless it did so in a particularly stupid way, of course).
(e_book_get_cursor): Ditto.
(e_book_get_book_view): Ditto.
(e_book_get_changes): Ditto.
(e_book_cancel): Added. Cancel a pending operation. (Basically
a call to e_book_cancel_op with error checking, etc.)
* backend/ebook/e-book-types.h: Added E_BOOK_STATUS_CANCELLED.
2001-03-17 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book-listener.c
(e_book_listener_queue_writable_status): new function.
(impl_BookListener_report_writable): new function.
(e_book_listener_get_epv): fill in epv->notifyWritable.
* backend/ebook/e-book-listener.h: add writable status entries.
* backend/ebook/e-book.c (e_book_do_writable_event): new function.
(e_book_check_listener_queue): add WritableStatusEvent to the
switch.
(e_book_class_init): register writable_status signal.
* backend/ebook/e-book.h: add writable_status signal.
* backend/idl/addressbook.idl: add notifyWritable method to
BookListener.
* gui/widgets/e-minicard.c (e_minicard_class_init): add "editable"
arg.
(e_minicard_init): init editable.
(e_minicard_set_arg): loop over the minicard fields setting their
"editable".
(e_minicard_get_arg): add editable.
(supported_fields_cb): use editable when creating the
contact_editor.
(add_field): set "editable" when creatin the e_minicard.
* gui/widgets/e-minicard.h (struct _EMinicard): add "editable".
* gui/widgets/e-minicard-view.c (e_minicard_view_class_init): add
editable arg.
(e_minicard_view_init): init editable.
(create_card): pass editable to e_minicard canvas item.
(e_minicard_view_set_arg): bit of a hack - loop over all the
canvas items setting their "editable."
(e_minicard_view_get_arg): add editable.
(supported_fields_cb): use editable when creating the contact
editor.
* gui/widgets/e-minicard-view.h (struct _EMinicardView): add
"editable."
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_class_init): add "editable" field.
(e_minicard_view_widget_init): init editable to FALSE.
(e_minicard_view_widget_set_arg): save editable, and pass it along
the e-minicard-view.
(e_minicard_view_widget_realize): same.
(e_minicard_view_widget_get_arg): add editable.
* gui/widgets/e-minicard-view-widget.h (struct
_EMinicardViewWidget): add "editable" field.
* gui/widgets/e-minicard-label.h (struct _EMinicardLabel): add
"editable" field.
* gui/widgets/e-minicard-label.c (e_minicard_label_class_init):
add "editable" arg.
(e_minicard_label_set_arg): editable, set it on the e_text too.
(e_minicard_label_get_arg): editable.
(e_minicard_label_construct): set the "editable" field when we
create the e_text cavas item
* gui/widgets/e-addressbook-view.c (e_addressbook_view_init):
default editable to FALSE.
(book_writable_cb): new function, set our editable field and
gtk_object_set it on the active view.
(e_addressbook_view_set_arg): set the active view's editable when
we set the view's book, and connect the "writable_status" signal
to book_writable_cb.
(change_view_type): same.
(supported_fields_cb): use our "editable" when creating the
contact editor.
* gui/widgets/e-addressbook-view.h (struct _EAddressbookView): add
editable field.
* gui/widgets/e-addressbook-model.c (e_addressbook_model_init):
change the default of editable to FALSE.
* backend/pas/pas-book.c (pas_book_report_writable): new function.
* backend/pas/pas-book.h: prototype for pas_book_report_writable.
* backend/pas/pas-backend-file.c (pas_backend_file_load_uri): if
we open the file O_RDWR (or create it) report it as writable. if
we can't open it as O_RDWR, try opening it read-only before we
attempt to create it.
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_process_authenticate_user): if we authenticate
successfully, grant write permissions (this is lacking but there's
really nothing we can do to determine the extent of the access
afforded a user.)
2001-03-15 Jon Trowbridge <trow@ximian.com>
* gui/component/e-address-widget.c: Added addressbook querying and
"cardification" functions, which are turned off by default for now
because of addressbook bugs. Added a popup menu option to turn
queries on, so that others can enjoy the thrill of massive flaming
death.
* gui/component/addressbook-factory.c (main): Made warnings always
be fatal.
* backend/pas/pas-book-view.c: Added some debugging spew.
* backend/pas/pas-backend-file.c (pas_backend_file_search): Added
a little experimental code to try to make file searches scale
better. #if 0/#endif-ed out for now.
* contact-editor/e-contact-quick-add.c: #included e-book-util.h.
* backend/ebook/e-card.c (e_card_name_match_string): Added.
Looser name-matching function.
(e_card_email_match_string): Added. Loose e-mail matching.
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_check_queue): Added code to cause us to
abort rather than get trapped in a 100%-CPU-consuming loop in
certain situations. Now we just need to figure out how to avoid
these situations altogether.
* backend/ebook/e-book-util.c: Added. Now contains the simple
query stuff and the open local addressbook functions.
* backend/ebook/e-book.c: Moved simple query stuff and open local
addressbook functions into e-book-util.c.
2001-03-15 Dan Winship <danw@ximian.com>
* gui/widgets/e-minicard-label.c (e_minicard_label_set_arg):
* gui/widgets/e-minicard.c (e_minicard_set_arg, e_minicard_event):
Update arguments to e_canvas_item_grab_focus.
2001-03-13 Christopher James Lahey <clahey@ximian.com>
* gui/component/addressbook.c (update_pixmaps): Fix a warning
here.
2001-03-13 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/Makefile.am (minicard_label_test_LDADD): Change to
ld order from Greg Williams.
2001-03-13 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_process_get_book_view): Moved where we call
pas_book_respond_get_book_view.
2001-03-12 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c: add E_STRING_PROP for
categories.
* backend/pas/evolutionperson.schema: add categories attribute.
* backend/ebook/e-card-simple.c (field_data): add
E_CARD_SIMPLE_FIELD_CATEGORIES.
* backend/ebook/e-card-simple.h: add
E_CARD_SIMPLE_FIELD_CATEGORIES.
2001-03-12 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard.c (supported_fields_cb): add is_read_only
param.
* gui/widgets/e-minicard-view.c (supported_fields_cb): add
is_read_only param.
* gui/widgets/e-addressbook-view.c (supported_fields_cb): add
is_read_only param.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_activate_obj): add is_read_only param.
also, include a little policy here and make it TRUE, as the user
shouldn't be editting in this context anyway (imo).
* gui/component/addressbook.c (supported_fields_cb): add
is_read_only param.
* contact-editor/test-editor.c (main): add is_read_only param.
* contact-editor/e-contact-editor.c (set_read_only): new function,
that either enables or disables all the text fields, combo boxes,
and some buttons, depending on the state of is_read_only.
(e_contact_editor_class_init): add read/write arg "is_read_only".
(full_name_clicked): set the is_read_only of the fullname dialog
to the editor's.
(full_addr_clicked): same.
(e_contact_editor_new): add is_read_only param, that gets set
along with the other params.
(e_contact_editor_set_arg): add setter for is_read_only.
(e_contact_editor_get_arg): add getter for is_read_only.
(_phone_arrow_pressed): change TRUE to !editor->is_read_only for
entry.
(_email_arrow_pressed): same.
(_address_arrow_pressed): same.
(enable_writable_fields): same.
* contact-editor/e-contact-editor-fullname.c
(e_contact_editor_fullname_class_init): add read/write arg
"is_read_only".
(e_contact_editor_fullname_set_arg): add setter for is_read_only
that enables/disables all the entries/combos.
(e_contact_editor_fullname_get_arg): add getter for is_read_only.
* contact-editor/e-contact-editor-fullname.h (struct
_EContactEditorFullname): add is_read_only flag.
* contact-editor/e-contact-editor-address.c
(e_contact_editor_address_class_init): add read/write arg
"is_read_only".
(e_contact_editor_address_set_arg): add setter for is_read_only
that disables/enables all the entries/combos.
(e_contact_editor_address_get_arg): add getter for is_read_only.
* contact-editor/e-contact-editor-address.h (struct
_EContactEditorAddress): add is_read_only flag.
2001-03-13 Iain Holmes <iain@ximian.com>
* backend/ebook/Makefile.am: Change the importer includes around a bit.
* backend/ebook/evolution-gnomecard-importer.c: Correctly add the includes.
2001-03-09 JP Rosevear <jpr@ximian.com>
* conduit/Makefile.am: PISOCK_INCLUDEDIR has become
PISOCK_CFLAGS in gnome-pilot.m4 and remove capplet foo
2001-03-11 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-book.c (e_book_simple_query): Added. A
simplified, cancellable query mechanism that lets you avoid
dealing with EBookView.
(e_book_simple_query_cancel): Added. Cancels a running query.
* backend/ebook/e-book-types.h: Add enum EBookSimpleQueryStatus.
2001-03-08 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-popup.c
(quick_add_cb): Switched to use e_contact_quick_add_free_form.
Removed debugging code, hopefully without introducing any bugs
in the process.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_insert_length): Fix bug with commas
inside of name/address combos. As long as the comma is inside of
quotes, it will be treated as part of the name rather than as a
break between addresses.
* gui/component/select-names/e-select-names-completion.c
(match_nickname): Use e_card_name_to_string for nickname match
strings.
(match_email): Use e_card_name_to_string for email match strings.
(e_select_names_completion_begin): Strip quotes out of query text,
so we don't produce malformed sexps.
Added William Blake quote easter egg.
* contact-editor/e-contact-quick-add.c: Further attempts to fix...
mostly unsuccessful.
(e_contact_quick_add_free_form): Added. Takes a single string
and tries to parse out (using some simple, loose rules) the
name and e-mail -- then calls e_contact_quick_add. An attempt to
get the computer to automatically Do The Right Thing.
* backend/ebook/e-book.c: Fixed some broken indentation. Yes, I'm
anal.
* gui/component/GNOME_Evolution_Addressbook.oafinfo: Added oaf_server
info for EAddressWidget.
* gui/component/GNOME_Evolution_Addressbook.oaf.in: Added oaf_server
info for EAddressWidget.
* gui/component/addressbook-factory.c (main): Add call to
e_address_widget_factory_init.
* gui/component/e-address-widget.h:
* gui/component/e-address-widget.c: Added. A little widget (and a
Bonobo control, BTW) for displaying addresses, with a left-click
menu. Used to display addresses in the mail viewer (as embedded
GtkHTML objects, replacing the text previously used). Still quite
incomplete.
2001-03-08 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook-component.c (factory_fn): Specify a
NULL `EvolutionShellComponentGetDndSelectionFn'.
2001-03-06 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_insert_length): Fix glitch with
inserting comma-delimited stuff when length > 1.
2001-03-06 Jon Trowbridge <trow@ximian.com>
* backend/ebook/e-book.c (e_book_load_local_address_book): Added.
Just encapsulates opening
file://~username/evolution/local/Contactes/addressbook.db, so that
path doesn't need to be hardwired in throughout the code.
2001-03-06 Benjamin Kahn <xkahn@cybersites.com>
* contact-editor/e-contact-quick-add.c (clicked_cb):
Added the third argument to e_contact_editor_new. (Cheated
and send NULL for the field argument, which is probably
troublesome. It will be fixed soon by either clahey or
toshok.)
2001-03-06 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-model.c
(e_select_names_model_replace): Fix a reference counting bug.
* gui/component/select-names/e-select-names-manager.c (popup_cb):
A callback for creating the appropriate popup by calling
e_select_names_popup.
(e_select_names_manager_create_entry): Connect popup_cb to the
entry's popup signal
* gui/component/select-names/e-select-names-popup.c: Added. Code
for popup right-click menus for recipient entries. Still a bit
incomplete.
* backend/ebook/e-destination.c (e_destination_get_email_num):
Added.
* contact-editor/e-contact-quick-add.c: Added. Some code and a
dialog for very quickly adding entries to the address book.
Still not fully working.
2001-03-04 Christopher James Lahey <clahey@ximian.com>
* backend/ebook/e-card-simple.c: Cleaned up the formatting in this
file a bit.
* contact-editor/e-contact-editor.c (e_contact_editor_set_arg):
Made it so that passing in NULL to the writable_fields arg sets
the set of writable fields to the empty set.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_activate_obj): Pass NULL as the
writable_fields argument here.
* gui/widgets/e-addressbook-model.c: Don't offset by one here.
This way we will get the file_as field as one of our
ETableColumns.
* gui/widgets/e-addressbook-view.c (SPEC): Updated this for the
changes in ECardSimple.
* gui/widgets/e-minicard.c (remodel): Don't remodel if the item
isn't realized.
2001-03-02 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c: doh, track renaming of
objectclass from evolvePerson to evolutionPerson.
2001-03-02 Chris Toshok <toshok@ximian.com>
* backend/pas/evolutionperson.schema: rename evolveperson.schema
to this, and add remaining attributes.
* backend/pas/pas-backend-ldap.c: add remaining fields, and fix up
ones that were incorrent (either the ldap_attr or the query prop).
2001-03-02 JP Rosevear <jpr@ximian.com>
* conduit/Makefile.am: update sed script
* conduit/e-address.conduit.in: update for new pilot foo
2001-03-02 Chris Toshok <toshok@ximian.com>
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_activate_obj): track change to
e_contact_editor_new.
2001-03-02 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (add_objectclass_mod): add
objectclasses for "person", "organizationalPerson", and "top" as
well, just to be complete.
(check_schema_support): rename check_for_evolve_person to this, to
reflect that we're doing more than just checking for that
objectClass.
(add_oc_attributes_to_supported_fields): new function.
(add_to_supported_fields): new function.
(pas_backend_ldap_destroy): unref supported_fields.
2001-03-02 Chris Toshok <toshok@ximian.com>
* gui/widgets/e-minicard-view.c (supported_fields_cb): new
function.
(e_minicard_view_event): split out the creation of the contact
editor to the supported_fields callback.
* gui/widgets/e-minicard.c (supported_fields_cb): new function.
(e_minicard_event): split out the creation of the contact editor
to the supported_fields callback.
* gui/widgets/e-addressbook-view.c (table_double_click): split
function into two functions, since e_book_get_supported_fields
requires a callback now.
(supported_fields_cb): new function.
* gui/component/addressbook.c (new_contact_cb): split this into
two functions, since e_book_get_supported_fields requires a
callback now.
(supported_fields_cb): new function.
* contact-editor/test-editor.c (main): track change to
e_contact_editor_new (pass NULL for the writable_fields arg.)
* contact-editor/contact-editor.glade: fix several labels so they
make better sense (since we look them up in e-contact-editor.c.)
* contact-editor/e-contact-editor.h (struct _EContactEditor): add
writable_fields. also, add it to e_contact_editor_new.
* contact-editor/e-contact-editor.c (e_contact_editor_class_init):
add writable_fields arg.
(e_contact_editor_destroy): unref the writable_fields list.
(e_contact_editor_new): pass @fields as the writable_fields arg.
(e_contact_editor_set_arg): add writable_fields support.
(enable_writable_fields): new (very hairy) function, to disable
everything and reenable just the fields listed in the
writable_fields list.
(_email_arrow_pressed): set label-email1, entry-email1, and
checkbutton-htmlmail to be sensitive since the only way to get
here is to activate a writable field in the menu.
(_address_arrow_pressed): set label-address, button-fulladdr, and
text-address to be sensitive for the same reason.
(_phone_arrow_pressed): sensitize the label and entry for the same
reason.
2001-03-02 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-card-simple.c (field_data): add new entries for
phone enums, and fill in the ecard_field with (bogus in all but a
few cases) strings. these are the strings sent from wombat to
evolution-addressbook for supported_fields.
(e_card_simple_get_ecard_field): new function.
(e_card_simple_map_phone_to_field): new function.
(e_card_simple_map_email_to_field): new function.
(e_card_simple_map_address_to_field): new function.
* backend/ebook/e-card-simple.h: add a few phone entries to the
ECardSimpleField enum, and add prototypes for mapping the list
types (phone, email, address) to ECardSimpleField. Also, add
prototype for e_card_simple_get_ecard_field.
* backend/ebook/e-book.c
(e_book_do_response_get_supported_fields): don't build the EList
here, it's already built.
* backend/ebook/e-book-listener.h: change fields from the CORBA
sequence to the EList in our reponse struct.
* backend/ebook/e-book-listener.c
(e_book_listener_queue_get_supported_fields_response): we make the
EList here, since after we return the CORBA list is freed up.
2001-03-02 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-file.c
(pas_backend_file_process_get_supported_fields): implement
properly, we support everything.
2001-03-01 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-bonobo.c
(entry_set_property_fn): Oops, we do need to be able to write to
"text" after all (for things like Reply-to: to work properly).
Fixed.
(impl_SelectNames_get_entry_for_section): Made "text" a writeable
property again.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_insert_length): Increment pos so that
we don't reverse strings when length > 1 (a particularly amusing
bug).
* gui/component/select-names/e-select-names-completion.c
(e_select_names_completion_destroy): Check for NULL before calling
gtk_object_unref (GTK_OBJECT (---)), to get rid of annoying error
messages.
2001-03-01 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-completion.c: I am an
idiot.
2001-03-01 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-table-model.c
(fill_in_info): Change for new EDestination/ESelectNamesModel API.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_get_source): Added. A function for
looking up the ESelectNamesModel by id. (I didn't end up using
this function, but it might come in handy later.)
(e_select_names_manager_get_cards): #if 0/#endif out this
function.
(e_select_names_manager_create_entry): Modified to attach an
ESelectNamesCompletion to the entry we create.
(completion_handler): A post-completion handler for our EEntry, to
take the completion's extra data (an EDestination) and properly
stick it into our ESelectNamesModel.
* gui/component/select-names/e-select-names.c
(real_add_address_cb): Changed to operate on EDestinations rather
than ECards and to use the new ESelectNamesModel API. This leads
to a rather nice code simplication.
(remove_address): Changed for new ESelectNamesModel API.
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): Rather than just passing the entry's text
through the property bag, get the "address text" from the model.
This returns a nice, verbose string of addresses with names
expanded when the address is tied to an ECard (i.e. "Jon
Trowbridge <trow@ximian.com>").
(impl_SelectNames_get_entry_for_section): Make the text property
read-only.
(entry_set_property_fn): ...and since it is read-only now, chop
out the setter code.
* gui/component/select-names/e-select-names-text-model.h:
* gui/component/select-names/e-select-names-text-model.c: Again,
this code has been (pretty much) totally rewritten to convert all
text operations into changes on the ESelectNamesModel. This lets
us give the associated EEntry some (IMHO) nice semantics regarding
whitespace, etc. Includes object activation, so destinations tied
to ECards are underlined and can be double-clicked to bring up a
contact editor.
* gui/component/select-names/e-select-names-model.h:
* gui/component/select-names/e-select-names-model.c: I've heavily
modified this object to both hide all implementation details
(which the old version exposed a bit too much for my peculiar
tastes) and to act as an EDestination container. The old code put
the text model operations here. I've moved them all to
ESelectNamesTextModel --- so the text model actions (insert,
delete, etc.) are all done through the API rather than operating on
ESelectNamesModel internals.
* gui/component/select-names/e-select-names-completion.c: Added. A
fairly complicated object derived from ECompletion that searches
our local addressbook in various and sundry ways.
* gui/component/select-names/e-select-names-completion.h:
* backend/ebook/e-destination.h:
* backend/ebook/e-destination.c: Added. This object encapsulates
a place to sent an email to, which can either be just a address as
a string ("trow@ximian.com"), a fancier string ("Jon Trowbridge
<trow@ximian.com>"), or an ECard and a specific address within
that ECard.
2001-03-01 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-minicard-view.c, gui/widgets/e-minicard-view.h,
gui/widgets/e-minicard.c, gui/widgets/e-minicard.h: Used
ESelectionModelSimple and the changes to EReflow and EReflowSorted
to get multiple selection in the minicard view.
* gui/widgets/test-reflow.c: Changed this to get it to compile
with the changes to EReflow.
2001-02-21 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-file.c (pas_backend_file_search): Made
this pay attention to the return value of e_sexp_parse.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_activate_obj): Fixed a const
inconsistency here.
2001-02-21 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-book.c (pas_book_queue_get_supported_fields):
new function.
(impl_GNOME_Evolution_Addressbook_Book_getSupportedFields): track
change to idl.
(pas_book_respond_get_supported_fields): new function.
* backend/pas/pas-book.h: add GetSupportedFields to the
PASOperation enum. Also, add a stringlist field to the PASRequest
struct. lastly, add a prototype for
pas_book_respond_get_supported_fields.
* backend/pas/pas-backend.h: remove prototype for
pas_backend_get_supported_fields, and remove it from the vtable.
* backend/pas/pas-backend.c (pas_backend_get_supported_fields):
remove.
(pas_backend_class_init): no vtable entry for get_supported_fields
anymore.
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_process_get_supported_fields): new function.
(pas_backend_ldap_process_client_requests): add case for
GetSupportedFields.
(pas_backend_ldap_class_init): get_supported_fields isn't in
vtable anymore.
* backend/pas/pas-backend-file.c
(pas_backend_file_process_get_supported_fields): new function.
(pas_backend_file_process_client_requests): add case for
GetSupportedFields.
(pas_backend_file_class_init): get_supported_fields isn't in
vtable anymore.
* backend/idl/addressbook.idl: Book::getSupportedFields now
returns void and add BookListener::notifySupportedFields.
* backend/ebook/test-client.c (get_fields_cb): new function.
(auth_user_cb): track change to e_book_get_supported_fields.
* backend/ebook/e-book.c
(e_book_do_response_get_supported_fields): new function.
(e_book_check_listener_queue): add case
GetSupportedFieldsResponse.
(e_book_get_supported_fields): switch to async model.
* backend/ebook/e-book.h: switch e_book_get_supported_fields to an
async model.
* backend/ebook/e-book-listener.c
(e_book_listener_queue_get_supported_fields_response): new
function.
(impl_BookListener_response_get_supported_fields): new function.
(e_book_listener_get_epv): fill in epv's "notifySupportedFields"
* backend/ebook/e-book-listener.h: add an async response for
GetSupportedFields and add a stringlist member to the
EBookListenerResponse struct.
2001-02-20 Federico Mena Quintero <federico@ximian.com>
* backend/pas/pas-book-factory.c (pas_book_factory_activate):
Moved the register_factory() code to here, since it was the only
thing being called anyways.
(PasBookFactoryPrivate): Added a "registered" flag.
(pas_book_factory_activate): Set the registered flag.
(pas_book_factory_destroy): Deactivate the factory when we go away.
2001-02-20 Chris Toshok <toshok@ximian.com>
* backend/ebook/e-book.c (e_book_get_supported_fields): new function.
* backend/ebook/e-book.h: add e-book interface to getting
supported fields.
* backend/ebook/test-client.c (auth_user_cb): shoe-horn in some
spew about supported fields.
2001-02-19 JP Rosevear <jpr@ximian.com>
* conduit/Makefile.am: Remove PISOCK_LIBDIR
2001-02-19 Jon Trowbridge <trow@ximian.com>
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_create_entry): When creating the entry,
open up an ebook (corresponding to the local addressbook) and make
the entry use an EAddressCompletion.
(completion_handler): Added; this is the actual completion
handler, which manipulates the entry when the user selects
something from the drop-down.
* gui/component/select-names/e-select-names-model.c: Various hacks
by clahey to unbreak e_select_names_model_add_item,
e_select_names_model_replace_item (which I added) and
e_select_names_model_remove_item.
* gui/component/select-names/e-select-names-text-model.c
(e_select_names_text_model_obj_count,
e_select_names_text_model_get_nth_obj): Make chunks of text that
correspond to ECards in the ESelectNamesModel be embedded objects.
(e_select_names_text_model_activate_obj): On activation, pop up a
contact editor for the embedded object's card.
(e_select_names_text_model_model_changed): Fixed to work with
ETextModel API changes.
(e_select_names_text_model_set_text): Make const correct.
(e_select_names_text_model_insert): Make const correct.
(e_select_names_text_model_insert_length): Make const correct.
* backend/ebook/e-address-completion.h,
backend/ebook/e-address-completion.c: Added. EAddressCompletion
is a derived class of ECompletion that does asynchronous address
lookups for completions.
2001-02-17 Chris Toshok <toshok@ximian.com>
* backend/idl/addressbook.idl: add sequence<string> typedef, and
add getSupportedFields method.
* backend/pas/pas-book.c
(impl_GNOME_Evolution_Addressbook_Book_getSupportedFields): new
function.
* backend/pas/pas-backend.c (pas_backend_class_init): init
get_supported_fields = NULL.
(pas_backend_get_supported_fields): new function.
* backend/pas/pas-backend.h: add prototype for
pas_backend_get_supported_fields.
* backend/pas/pas-backend-file.c
(pas_backend_file_get_supported_fields): new function.
(pas_backend_file_class_init): fill in get_supported_fields.
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_get_supported_fields): new function.
(pas_backend_ldap_class_init): fill in get_supported_fields.
2001-02-14 Christopher James Lahey <clahey@ximian.com>
* backend/pas/pas-backend-ldap.c: Undefine E_STRING_PROP and
E_LIST_PROP here.
* contact-editor/e-contact-editor.c,
contact-editor/e-contact-editor.h (e_contact_editor_raise): Added
this function.
* gui/widgets/e-minicard.c, gui/widgets/e-minicard.h
(e_minicard_event): Added an editor field to the EMinicard object.
Made it so that if you double click on the same card twice, it
doesn't open a new window, but instead raises the old.
2001-02-08 Iain Holmes <iain@ximian.com>
* gui/component/addressbook-storage.c (addressbook_source_free):
Free the ldap.binddn.
* gui/widgets/e-addressbook-view.c
(e_addressbook_view_setup_menus): Free the dir strings.
2001-02-08 Christopher James Lahey <clahey@ximian.com>
* contact-editor/e-contact-editor.c (categories_clicked): Set the
header on the category dialog we pop up.
2001-02-12 Kjartan Maraas <kmaraas@gnome.org>
* backend/ebook/GNOME_Evolution_Addressbook_GnomeCard_Importer.oaf.in: Translations.
* gui/component/select-names/GNOME_Evolution_Addressbook_SelectNames.oaf.in:
Marked strings for translation in this newly created file.
* gui/component/select-names/Makefile.am: Hook up the .oaf.in files in the
xml-i18n-tools framework.
* gui/component/Makefile.am: Same as above.
* gui/component/GNOME_Evolution_Addressbook.oaf.in: Marked stuff for translation here
too.
2001-02-11 Jason Leach <jasonleach@usa.net>
* gui/component/addressbook.c: Removed an ancient #include
<libgnorba/gnorba.h>
2001-02-11 Gediminas Paulauskas <menesis@delfi.lt>
Really use xml-i18n-tools.
* conduit/e-address-conduit-control-applet.desktop: removed.
* conduit/e-address-conduit-control-applet.desktop.in: added empty.
* conduit/Makefile.am: reflect above changes, merge translations.
* contact-editor/e-contact-editor-strings.h,
contact-editor/fulladdr.glade.h, contact-editor/fullname-strings.h,
contact-editor/e-contact-editor-confirm-delete.glade.h,
gui/component/select-names/select-names.glade.h:
removed these files, xml-i18n-extract takes care of strings itself.
* contact-editor/*.glade,
gui/component/select-names/select-names.glade,
gui/widgets/alphabet.glade, printing/e-contact-print.glade:
changed project options to not output_translatable_strings.
* contact-editor/Makefile.am, gui/widgets/Makefile.am,
gui/component/select-names/Makefile.am, printing/Makefile.am:
do not include removed files in EXTRA_DIST.
2001-02-07 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (check_for_evolve_person): flesh
out this check. #ifdef the entire thing OPENLDAP2, as it only
works with the new schema stuff in openldap 2.x (both on server
and client, so upgrade your server.)
2001-02-07 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/e-addressbook-view.c: Added N_("* Click here to add
a contact *").
2001-02-07 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_connect): only
set the DEBUG_LEVEL if we're OPENLDAP2.
2001-02-06 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (email_compare): return TRUE if
equal, FALSE otherwise.
(business_compare): same.
(homephone_compare): same.
(email_ber): return NULL if there are no elements in our list.
(homephone_ber): same.
(business_ber): same.
(build_mods_from_ecards): add smarts to handle list elements
properly (like email, business_phone, home_phone.) now we'll
properly send updates if any element in the list changes.
2001-02-06 Christopher James Lahey <clahey@ximian.com>
* gui/widgets/Makefile.am (INCLUDES): Added
-DEVOLUTION_DATADIR=\""$(datadir)"\".
* gui/widgets/e-addressbook-view.c
(e_addressbook_view_setup_menus): Changed the local and system
directories.
2001-02-06 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (create_card_handler): doh,
didn't mean to commit this.
2001-02-06 Chris Toshok <toshok@ximian.com>
* backend/pas/evolveperson.schema: new file. this will eventually
form the suggested additions to an existing openldap server that,
along with support for inetorgperson, will allow people to store
all evolution attributes in ldap.
2001-02-06 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_init): don't
need the = NULL's since we g_new0.
(check_for_evolve_person): new function.
(pas_backend_ldap_connect): check to see if the evolvePerson
objectclass is there.
(build_mods_from_ecards): right now, just silently skip the extra
attributes if we don't support evolvePerson.
(add_objectclass_mod): new function, add both inetOrgPerson and
(if it's available) evolvePerson as objectclasses.
(pas_backend_ldap_process_authenticate_user): also check to see if
evolvePerson is there, if we couldn't do it (due to auth reasons)
in the connect method.
(prop_info): change the telephoneNumber LDAP attribute to be used
for evolution's business phone numbers. the primary phone number
will be a single valued attribute on evolvePerson.
(business_populate): new function.
(business_ber): new function.
(business_compare): new function.
2001-02-05 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (create_card_handler): err,
allocate 2 char*s when i assign 2 char*s.
2001-02-05 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (modify_card_handler): switch to
ldap_modify_ext_s if OPENLDAP2, as ldap_modify_s is deprecated.
(build_mods_from_ecards): don't include the mod if the value is ""
- this isn't valid on schema checking ldap servers.
(homephone_populate): new function.
(homephone_ber): new function.
(homephone_compare): new function.
(create_card_handler): add spew when adding cards so I can see
what's going on.
2001-02-05 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook-config.c (table_add_elem): Save the
help_text in the closure.
2001-02-05 Christopher James Lahey <clahey@helixcode.com>
* gui/widgets/Makefile.am (libeminicard_a_SOURCES): Added
gal-view-factory-minicard.c, gal-view-factory-minicard.h,
gal-view-minicard.c, and gal-view-minicard.h.
* gui/widgets/gal-view-factory-minicard.c,
gui/widgets/gal-view-factory-minicard.h,
gui/widgets/gal-view-minicard.c, and
gui/widgets/gal-view-minicard.h: New classes for minicard view
type.
* gui/widgets/e-addressbook-view.c: Deploy gal-view stuff
properly.
2001-02-05 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c (e_card_get_vcard): Make the Note field
be quoted printable.
2001-01-27 Christopher James Lahey <clahey@helixcode.com>
* gui/search/e-addressbook-search-dialog.c
(e_addressbook_search_dialog_init): This should be a close button,
not a cancel button.
2001-02-04 Christopher James Lahey <clahey@ximian.com>
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_activate_dialog): Call
e_select_names_set_default when appropriate.
* gui/component/select-names/e-select-names.c,
gui/component/select-names/e-select-names.h: Added support for
double clicking sending the selected contacts to the default
section. Added a set_default function. Made multiple selection
work.
2001-01-29 Chris Toshok <toshok@ximian.com>
* gui/component/addressbook-config.c
(addressbook_config_source_label): #ifdef INCLUDE_FILE_SOURCE.
(table_add_elem): add help_text parameter and set up focus_in
events to display the help in the dialog's html area.
(focus_help): new function, calls put_html on the help text.
(addressbook_ldap_auth_item_new): add help texts.
(addressbook_source_item_new): add help texts.
(addressbook_source_dialog): add help texts.
2001-01-27 Ettore Perazzoli <ettore@ximian.com>
* gui/component/select-names/e-select-names.c
(e_select_names_add_section): Remove the butt-ugly arrow icon and
replace it with a less invasive "->" icon.
2001-01-25 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (build_mods_from_ecards): add
comment about the else block here.
(prop_info): add home_address, business_address, business_fax,
assistant, and isdn.
2001-01-25 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-file.c (pas_backend_file_load_uri): Made
this only add the initial VCard if it finds a file
"create-initial" in the directory it's creating the database in.
* gui/component/addressbook-component.c (factory_fn): Added a
create_folder function.
* gui/search/e-addressbook-search-dialog.c
(e_addressbook_search_dialog_init): Fixed an unused variable
warning.
2001-01-25 Christopher James Lahey <clahey@helixcode.com>
* gui/widgets/e-addressbook-view.c
(e_addressbook_view_setup_menus): Setup the view collection
properly and handle the "display_view" signal.
2001-01-25 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c (update_pixmaps): Consider the
placeholder in the path for the "Print" item.
2001-01-25 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c (update_pixmaps): Set the icon for
"/Toolbar/Find" to "24_find_contact.xpm".
2001-01-25 Ettore Perazzoli <ettore@ximian.com>
* gui/component/addressbook.c (set_pixmap): New.
(update_pixmaps): New function, setting the pixmaps for the items
of type "pixbuf", using `set_pixmap'.
(control_activate): Call it.
2001-01-25 Not Zed <NotZed@Ximian.com>
* backend/pas/pas-backend-ldap.c: esexp api change fixes.
* backend/pas/pas-backend-file.c (entry_compare): Fix for e_sexp api changes.
(vcard_matches_search): esexp api fixes.
(pas_backend_file_search): Ouch, unref the e-sexp properly (not gtk object).
2001-01-24 Chris Toshok <toshok@ximian.com>
* backend/pas/pas-backend-ldap.c (email_ber_func): make sure to
add the lengths here (include the \0? anyone?).
(build_mods_from_ecards): if we're filling in mod->mod_bvalues,
set mod_op |= LDAP_MOD_BVALUES.
2001-01-23 Jason Leach <jasonleach@usa.net>
(Fix #1225: advanced search cancel/close)
* gui/search/e-addressbook-search-dialog.c
(e_addressbook_search_dialog_init): Set it up with Search and a
Cancel button, Search is still the default.
2001-01-23 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (local_record_from_ecard): properly ref
the ecard. still need to kill some memory leaks.
2001-01-22 JP Rosevear <jpr@ximian.com>
* conduit/Makefile.am: remove vfs dependency
2001-01-21 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (delete_record): Remove
deleted records from the pilot map so we don't have dupes in the future
2001-01-19 Dan Winship <danw@ximian.com>
* gui/widgets/e-addressbook-view.c (table_right_click):
* gui/widgets/e-minicard.c (e_minicard_event): Update for
e_popup_menu_run prototype change.
2001-01-19 Jason Leach <jasonleach@usa.net>
(Adding a boolean "entry_changed" BonoboPropertyBag arg)
* gui/component/select-names/e-select-names-bonobo.c
(entry_set_property_fn): Use a gtk_object_set_data to set the
property to TRUE here.
(entry_changed): New function, calls bonobo_control_set_property
if entry_changed hasn't been set to TRUE yet.
(impl_SelectNames_get_entry_for_section): Connect "changed" on
each entry_widget to the new entry_changed() func.
2001-01-19 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (ecard_from_remote_record): always free
the delivery elements and correct embarrassingly stupid memory error
that was causing the addressbook conduit problems.
* backend/ebook/e-book-view-listener.c
(e_book_view_listener_check_queue): ref/unref ourself when processing
in case someone we signal unrefs us.
* conduit/address-conduit.c (sequence_complete): disconnect signals
when complete
2001-01-17 Federico Mena Quintero <federico@ximian.com>
* backend/pas/pas-book-factory.c (pas_book_factory_activate): Made
it return a gboolean; it was completely ignoring the return value
from register_factory().
2001-01-17 Larry Ewing <lewing@helixcode.com>
* backend/ebook/.cvsignore: add evolution-gnomecard-importer.
* backend/ebook/Makefile.am (oaf_DATA): don't require the pine
oainfo file until it is actually added to the repository. We need
to keep the build working for nightlies to work.
2001-01-16 Jason Leach <jasonleach@usa.net>
* backend/pas/pas-backend-file.c (INITIAL_VCARD): s/Helix
Code/Ximian/ for the initial contact card.
2001-01-15 JP Rosevear <jpr@ximian.com>
* conduit/address-conduit.c (print_local): prevent segfaults and
buffer overflows
(print_remote): ditto
2001-01-14 JP Rosevear <jpr@ximian.com>
* conduit/Makefile.am: pass -module and -avoid-version to conduit
linker
2001-01-12 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook-component.c (factory_fn): Pass NULL as
the @copy_folder_fn arg to `evolution_shell_component_new'.
2001-01-12 Miguel de Icaza <miguel@ximian.com>
* gui/widgets/e-addressbook-view.c: added i18n for etable.
2001-01-11 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_process_create_card): get a book view from
somewhere so we can give status messages - choose the first one in
the list.
(pas_backend_ldap_process_modify_card): same.
(pas_backend_ldap_process_remove_card): same.
(prop_info): add more properties, like home_phone, mobile, pager,
uri, org_unit, office, title, and manager.
2001-01-09 Miguel de Icaza <miguel@gnu.org>
* gui/widgets/Makefile.am (minicard_widget_test_LDADD): Put GNOME
libraries at the end to make the thing compile.
* printing/Makefile.am: Order LDADD flags correctly so it compiles.
2001-01-09 Chris Toshok <toshok@helixcode.com>
* gui/component/addressbook.c (addressbook_factory_new_control):
connect with the EAddressbookView's status_message signal.
(set_status_message): set the status message on the ShellView
Interface associated with our control.
(retrieve_shell_view_interface_from_control): new function. get
the shell view inteface associated with a control.
* gui/widgets/e-addressbook-view.c
(e_addressbook_view_class_init): register status_message signal.
(status_message): new function, emit our status_message signal.
(change_view_type): connect with the view->object's
"status_message" signal.
* gui/widgets/e-addressbook-view.h (struct
_EAddressbookViewClass): add status_message signal.
2001-01-09 Chris Toshok <toshok@helixcode.com>
* gui/widgets/e-minicard-view-widget.c
(e_minicard_view_widget_class_init): register our status_message
signal.
(status_message): new function, emit our status_message signal.
(e_minicard_view_widget_realize): connect to the EMinicardView's
status_message signal.
* gui/widgets/e-minicard-view-widget.h: add status_message signal.
* gui/widgets/e-minicard-view.c (e_minicard_view_class_init):
register our status_message signal.
(e_minicard_view_init): init status_message_id.
(status_message): new function, emit our status_message signal.
(book_view_loaded): connect to the EBookView's status_message
signal.
(disconnect_signals): disconnect status_message_id.
* gui/widgets/e-minicard-view.h: add status_mesage_id, and
status_message signal.
* gui/widgets/e-addressbook-model.c (status_message): new
function, emit our status_message.
(e_addressbook_model_class_init): register our "status_message"
signal.
(book_view_loaded): connect to the EBookView's status_message
signal, so we can chain it to our parent.
(e_addressbook_model_init): init status_message_id.
(remove_book_view): disconnect status_message_id.
* gui/widgets/e-addressbook-model.h: add status_message_id, and
status_message signal.
* backend/pas/pas-backend-ldap.c change the objectclass we create
objects with to "inetOrgPerson" as it encompasses the fields we
use.
(create_dn_from_ecard): remove the mail/org handling from
here. we just prepend cn=$cn onto the base dn.
(create_card_handler): remove the NULL that build_mods_from_ecards
adds at the end, and insert our objectClass.
(modify_card_handler): call search_for_dn to get the ECardSimple
of the old card, since it might (and does in the current code)
doing a brute force search.
(search_for_dn): new function, to search for an entry by its dn.
right now we brute force (objectclass=*) under the base dn and
compare dn's. going to add a first pass that explodes the dn and
searches that way, using (objectclass=*) as a last resort. also,
here's where we'd put the extensibleMatch code if we want to go
that route.
* backend/ebook/e-card.c (e_card_set_arg): if we're setting the
full name regenerate ecard->name.
2001-01-04 Chris Toshok <toshok@helixcode.com>
* backend/ebook/e-book-listener.c
(e_book_listener_queue_authentication_response): new function.
(impl_BookListener_respond_authentication_result): new function.
(e_book_listener_get_epv): fill in
epv->notifyAuthenticationResult.
* backend/ebook/e-book-listener.h: add AuthenticationResponse to
EBookListenerOperation.
* backend/ebook/e-book.c (e_book_authenticate_user): new function.
* backend/ebook/e-book.h: add prototype for
e_book_authenticate_user.
* backend/idl/addressbook.idl (GNOME:Evolution:Addressbook:Book):
add authenticateUser method.
(GNOME:Evolution:Addressbook:BookListener): add
AuthenticationFailed and AuthenticationRequired to CallStatus.
also add notifyAuthenticationResult method.
* backend/pas/pas-backend-file.c
(pas_backend_file_process_authenticate_user): dummy
authenticate_user function that always succeeds.
(pas_backend_file_process_client_requests): respond to the
AuthenticateUser request.
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_build_query):
gtk_object_unref(sexp) => s_exp_unref(sexp).
(pas_backend_ldap_process_authenticate_user): fill in to use
ldap_simple_bind_s.
(pas_backend_ldap_process_client_requests): respond to the
AuthenticateUser request.
* backend/pas/pas-book.c (pas_book_queue_authenticate_user): new
function.
(impl_GNOME_Evolution_Addressbook_Book_authenticateUser): new
function.
(pas_book_respond_authenticate_user): new function.
(pas_book_get_epv): fill in epv->authenticateUser.
* backend/pas/pas-book.h: add AuthenticateUser operation type, and
add user/passwd to the PASRequest struct.
* gui/component/addressbook-storage.c
(addressbook_storage_get_source_by_uri): new function. should use
a hashtable, perhaps, but the lists will generally be small
anyway.
* gui/component/addressbook-storage.h: add prototype for
addressbook_storage_get_source_by_uri.
* gui/component/addressbook-config.c
(addressbook_source_dialog_set_source): fill in the binddn if the
auth page is shown.
* gui/component/addressbook.c (book_open_cb): shoe-horn
authentication in here. if the source was configured to use
authentication, authenticate the user after opening the ebook.
also, be paranoid and clear out the password after authenticating.
(book_auth_cb): callback for auth. set the "book" arg on the
view->view here.
(passwd_cb): set the view's passwd that'll be used in
book_open_cb.
(addressbook_view_free): g_free view->passwd.
2001-01-04 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook-component.c,
gui/component/addressbook-component.h
(addressbook_component_get_shell_client): Added this function.
* gui/component/select-names/e-select-names.c,
gui/component/select-names/e-select-names.h: Added code for the
ability to switch between different folders. This doesn't work
yet.
* gui/component/select-names/select-names.glade,
gui/component/select-names/select-names.glade.h: Added an option
menu to this dialog.
2001-01-04 JP Rosevear <jpr@helixcode.com>
* conduit/Makefile.am: Fix hard coded library names that were
accidentally committed (i'm looking at you miggie)
* contact-editor/e-contact-editor.c (categories_clicked): Reflect
renaming.
* contact-editor/e-contact-editor-categories.[hc]: These are
living in gal now
2001-01-04 JP Rosevear <jpr@helixcode.com>
* backend/pas/pas-backend-file.c (pas_backend_file_book_view_free):
Need to e_sexp_unref the the sexp, not gtk_object_unref it.
2001-01-03 Michael Meeks <michael@helixcode.com>
* gui/widgets/e-addressbook-model.c (get_view): check
capabilities is valid before doing a strstr.
2001-01-03 Michael Meeks <michael@helixcode.com>
* backend/pas/pas-backend-file.c (pas_backend_file_search):
g_strdup things we g_free.
2001-01-02 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c (delete_cb): Make sure this
won't crash if the given contact is removed from the database
while this function is being called.
* gui/widgets/e-minicard.c: Made sure this won't crash if the
given contact is removed from the database while the right click
menu is being displayed.
2000-12-30 Chris Toshok <toshok@helixcode.com>
* gui/component/addressbook-config.c (edit_source_clicked): copy
the dialog's source, destroy the dialog after we're done, and make
sure to update both columns in the clist.
(add_source_clicked): copy the dialog's source, and destroy the
dialog when we're done.
(addressbook_source_dialog_destroy): free up all the dialog's
memory.
* gui/component/addressbook.c (set_prop): allow file: uri's that
point to files, not just dirs that contain addressbook.db. The
rule is the addressbook file has to end in .db.
* gui/component/addressbook-storage.c (file_source_foreach):
contactserver => contactfile. cut and paste error.
(addressbook_storage_init_source_uri): use file://%s to build the
uri.
* gui/component/e-ldap-server-dialog.[ch]: forgot to remove these
in my last commit.
2000-12-29 Chris Toshok <toshok@helixcode.com>
* gui/component/addressbook.c (config_cb): new function, calling
our new config ui code.
(control_activate): no longer load evolution-addressbook-ldap.xml,
as it's not there.
* gui/component/addressbook-component.c (owner_set_cb):
setup_ldap_storage => addressbook_storage_setup.
* gui/component/Makefile.am (evolution_addressbook_SOURCES):
remove e-ldap-storage.[ch] and add addressbook-storage.[ch].
(glade_DATA): remove ldap-server-dialog.glade and add
addressbook-config.glade.
(EXTRA_DIST): same.
* gui/component/addressbook-config.[ch]: add another dialog to
give a list of our sources and offer the Add/Delete/Edit
interface. This plugs into the previous dialog work (the source
editor.)
* gui/component/addressbook-storage.[ch]: new files, containing
the remains of e-ldap-storage.[ch] and adding the new
AddressbookSource type and it's subordinates. Also, the xml
format has changed slightly and the file name is no longer
~/evolution/ldap-servers.xml - it's
~/evolution/addressbook-sources.xml.
* gui/component/addressbook-config.glade: new file, new config
interface.
* gui/component/ldap-server-dialog.glade: removed.
* gui/component/e-ldap-storage.[ch]: removed.
2000-12-28 Chris Toshok <toshok@helixcode.com>
* gui/component/Makefile.am (evolution_addressbook_SOURCES): add
addressbook-config.[ch].
* gui/component/addressbook-config.c,
gui/component/addressbook-config.h: new files, containing at the
moment a beautiful "new/edit source dialog" inspired by the
mail-config-gui code. It'll be ready for prime time after rev'ing
the .xml file the addressbook uses to store it's "other sources"
to include files, and the addition of the ldap auth stuff.
2000-12-25 Miguel de Icaza <miguel@helixcode.com>
* gui/widgets/e-minicard.c (e_minicard_realize): Set draw
background to FALSE.
* gui/widgets/e-minicard-label.c (e_minicard_label_construct): ditto.
(e_minicard_label_construct): ditto
2000-12-23 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/fullname-strings.h,
contact-editor/fullname.glade: Added Ms. and Miss to the prefix
drop down box. Patch submitted by Martin Hicks <mort@bork.org>.
2000-12-21 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.c (cursor_cb): Ref the cards that get put
in the change list
(next_changed_item): util function to get the real next changed item
(compute_status): really compute the status of the record
(local_record_from_uid): Set the id of the temporary card
(check_for_slow_setting): Make this check a little saner
(card_added): Only record the CardObjectChange if the card is not
archived
(card_changed): ditto
(card_removed): ditto
(set_status_cleared): actually clear the status
(for_each_modified): Clean out cruft and use next_changed_item
(add_record): Set the new id properly in our local card copy
(replace_record): handle the case where the record has been deleted
and we need to call add. need to update the changed_hash entry
(delete_record): Don't panic if the card is not found, its already
been deleted.
* backend/pas/pas-backend-file.c (pas_backend_file_book_view_copy):
The change_context no longer has a del_cards member
(pas_backend_file_book_view_free): ditto
(pas_backend_file_process_get_changes): ditto
(pas_backend_file_changes_foreach_key): just record the id
(pas_backend_file_changes): notify_remove needs an id not a vcard
2000-12-20 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.c (match): Use my own wrapper
functions instead of trying to *directly* access the the data
structures my self
(post_sync): Put in hack to prevent syncing the same records twice
(local_record_from_uid): set the card id when creating a blank one
(add_record): Set the id of the card we have and don't go to the
server to get the latest version
2000-12-19 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.c (ecard_from_remote_record): Convert
pilot strings to utf for the e-cards.
2000-12-19 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.c (local_record_from_ecard): Convert ecard
strings to pilot encodings
2000-12-19 Christopher James Lahey <clahey@helixcode.com>
* gui/widgets/e-addressbook-view.c (delete): Made it so that if
you select multiple contacts, the right click menu to delete
deletes them all.
2000-12-18 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c (ldap_error_to_response): always
use LDAP_NAME_ERROR (in the openldap1 case it's #defined to
NAME_ERROR).
(build_card_from_entry): ldap_get_values can return NULL. also,
openldap2 keeps us from getting at ldap->ld_errno, so we can't
tell if there was a decoding error like we used to. the double
free problem where ldap would free the ber if there was a decoding
problem might be fixed now.. further investigation is needed.
for now we leak in openldap2.
(ldap_search_handler): the ldap structure is opaque, so use
ldap_search_ext to give the extra information (the max responses,
timeout, etc.) in the openldap2 case.
2000-12-13 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-ldap.c (ldap_error_to_response): Test
for the existance of LDAP_NAME_ERROR and if it exists as a macro,
use it instead of NAME_ERROR.
2000-12-14 Michael Meeks <michael@helixcode.com>
* gui/component/GNOME_Evolution_Addressbook.oafinfo: update cut
and paste description error.
2000-12-13 Dan Winship <danw@helixcode.com>
* gui/widgets/e-minicard-control.c (stream_read): NULL-terminate
the returned vcard so we don't sometimes end up with trailing
junk that makes libversit unhappy.
2000-12-13 Iain Holmes <iain@helixcode.com>
* gui/component/select-names/e-select-names.c
(e_select_names_add_section): Make the -> into a GNOME stock image.
2000-12-09 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names/e-select-names.c
(e_select_names_init): Connect to the "cursor_change" signal on
the ETable here instead of the ETableScrolled.
(remove_address): Added the col and event parameters to this
callback to match the added parameters to the double click signal.
(e_select_names_add_section): Connect to the "double_click" signal
on the ETable here instead of the ETableScrolled.
2000-12-09 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c (e_card_set_arg): When setting the "name"
argument, copy the incoming name. This fixes a crash.
2000-12-09 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Made editing the name using
the full name button set the file as entry properly. Made it
so that the address parse that the user chooses after
clicking on the Full Address... button gets saved.
2000-12-08 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c (full_name_clicked): Made it
so that the editor->name is set after the entry is changed. This
means that the reparse that the person chose is saved.
2000-12-07 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/e-ldap-storage.c (setup_ldap_storage): Pass NULL
as the @toplevel_node_handler_id argument to
`evolution_storage_new'.
2000-12-08 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c: Fixed some formatting.
* contact-editor/e-contact-editor-categories.h: Removed an
unneeded #include.
* gui/widgets/e-addressbook-view.c: Connect to the signals on the
ETable instead of the ETableScrolled.
2000-12-07 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.c (local_record_from_uid): Pass "" rather
than NULL to e_card_new.
(local_record_from_ecard): Make sure ecard->name is valid
(check_for_slow_setting): Remove hard coded test value
(card_added): g_strdup the resul of e_card_get_id
(card_changed): ditto
2000-12-07 Christopher James Lahey <clahey@helixcode.com>
* gui/widgets/e-addressbook-view.c: Got rid of code referencing
the ETableScrolled proxy functions.
2000-12-06 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Moved the gal view menu stuff from
here to EAddressbookView.
* gui/widgets/e-addressbook-view.c,
gui/widgets/e-addressbook-view.h: New function to set up the menus
for the EAddressbookView.
2000-12-06 JP Rosevear <jpr@helixcode.com>
* conduit/Makefile.am: Another conduit build fix
2000-12-05 JP Rosevear <jpr@helixcode.com>
* backend/pas/pas-backend-file.c (pas_backend_file_changes_foreach_key):
Create an empty vcard with the appropriate id for deleted cards
* conduit/address-conduit.c (ecard_from_remote_record): Ensure the
address fields are added sensibly
2000-12-05 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/e-ldap-storage.c (setup_ldap_storage): Updated the
call to `evolution_storage_new()': pass NULL for
@toplevel_node_uri.
2000-11-28 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.c (local_record_to_pilot_record): Return
a struct rather than a pointer to a struct
(view_cb): kill warning
(compare): local_record_to_pilot_record now returns a struct
(prepare): ditto
(free_prepare): remove as per gnome-pilot changes
(conduit_get_gpilot_conduit): don't listen for free_prepare signal
2000-11-27 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.h: Remove "complete" field
* conduit/address-conduit.c (print_local): Make it print useful debug
info
(print_remote): ditto
(local_record_from_ecard): Make sure phone numbers get out to the pilot
(ecard_from_remote_record): Set phone strings to "" if they are null
(sequence_complete): unref the book view
(view_cb): ref the book view
(free_prepare): do nothing
* backend/pas/pas-backend-file.c (pas_backend_file_book_view_free):
Destroy the card lists with the rest of the view.
(pas_backend_file_changes): Don't destroy the card lists here
(pas_backend_file_book_view_free): Free the card/id lists in the
change context here, the correct place.
(pas_backend_file_changes): instead of here...
2000-11-22 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-file.c: Set view.change_context to NULL
in pas_backend_file_process_get_book_view. Changed
pas_backend_file_book_view_copy a bit.
* backend/pas/pas-backend-ldap.c: Got rid of a warning.
2000-11-18 Matt Bissiri <matt@bissiri.org>
* gui/component/Makefile.am:
Add widgets/menus/libmenus.la to evolution_addressbook_LDADD
so that it will link properly now that gal-view-menus.[ch]
was moved from gal into evolution.
2000-11-15 JP Rosevear <jpr@helixcode.com>
* backend/pas/pas-backend-file.c (pas_backend_file_book_view_copy):
Initialize destination struct with '0's.
2000-11-12 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c: Changed the mime type from "text/vcard"
to "text/x-vcard".
2000-11-11 Matt Bissiri <bissiri@eecs.umich.edu>
* backend/ebook/.cvsignore: Add idl-generated files.
* backend/ebook/e-book.c: (e_book_do_response_get_changes):
* backend/ebook/e-card.c: (e_card_send):
s/Evolution_/GNOME_Evolution_/g;
2000-11-11 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/Makefile.am: Link in composer bonobo code.
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added code to
send mail to an ECard or send an ECard as a VCard attachment.
* contact-editor/e-contact-editor.c: Add verbs to send the contact
as a VCard or send mail to the contact.
* gui/search/e-addressbook-search-dialog.c: Removed some unused
variables.
* gui/widgets/e-addressbook-view.c, gui/widgets/e-minicard.c:
Added menu items to send the contact as a VCard or send mail to
the contact.
2000-11-11 Matt Bissiri <bissiri@eecs.umich.edu>
* gui/component/addressbook.oafinfo:
* gui/component/select-names/evolution-addressbook-select-names.oafinfo:
Update the remaining "IDL:Evolution*" to "IDL:GNOME/Evolution*"
to sync up with yesterday's IDL re-scoping.
2000-11-09 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-ldap.c: Fixed a warning.
* gui/component/addressbook.c: Put in gal view menus for testing
purposes.
* printing/e-contact-print-envelope.c: Fixed up envelope printing
a bit. Added code for printing return addresses.
2000-11-09 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.h: Add changed_hash, change list and complete bool
* conduit/address-conduit.c (local_record_from_ecard): Add empty field checks
(card_added): callback for book view
(card_changed): ditto
(card_removed): ditto
(sequence_complete): ditto
(view_cb): callback for the get changes call
(pre_sync): force synchronous loading of book view
(for_each): we already have the card so create the local record directly
(for_each_modified): Uncomment and fix
(delete_record): ditto
* conduit/Makefile.am: link against gal for ebook - needs fixing
* backend/ebook/e-book.c (e_book_do_response_get_changes): Properly respond
to a get_changes call
(e_book_check_listener_queue): define the get changes response operation
* backend/ebook/e-book-listener.c (e_book_listener_queue_get_changes_response):
Queue up a get changes response
(impl_BookListener_respond_get_changes): Implement the get_changes method
(e_book_listener_get_epv): add get_changes implementation to epv
* backend/pas/pas-backend-file.c (pas_backend_file_book_view_copy): Only
copy the search_context and change_context elements if they actually exist
(pas_backend_file_changes): Hard code a path for now, only notify if
there is something to notify about
2000-11-07 JP Rosevear <jpr@helixcode.com>
* backend/pas/pas-book.h: Update PASRequest structure
* backend/pas/pas-book.c (impl_Evolution_Book_get_changes): update param name
(pas_book_queue_get_changes): Use PASRequest change_id slot
* backend/pas/pas-backend-file.c (pas_backend_file_book_view_copy):
Properly copy change_id and change_context
(pas_backend_file_book_view_free): Free change_id/change_context
(pas_backend_file_changes_foreach_key): Callback to figure out the
deleted cards
(pas_backend_file_changes): Use new e-dbhash stuff to implement.
Write out updated hash
* backend/idl/addressbook.idl: Rename get_changes param
2000-11-06 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Switched from EAddressbookSearch to
ESearchBar.
* gui/widgets/Makefile.am, gui/widgets/e-addressbook-search.c,
gui/widgets/e-addressbook-search.h: Removed EAddressbookSearch.
This has been moved to filter/ and renamed ESearchBar.
* printing/e-contact-print-envelope.c: Forgot to set the font.
This works for me now.
2000-11-06 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/select-names/e-select-names-bonobo.c
(impl_SelectNames_get_entry_for_section): Duplicate the object
reference before returning.
2000-11-05 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c,
gui/widgets/e-addressbook-view.c, gui/widgets/e-minicard.c: Add
menus items to the envelope printing stuff.
* gui/component/addressbook.c: Hook up the search menu.
* gui/widgets/e-addressbook-search.c,
gui/widgets/e-addressbook-search.h: Add the search menu.
* printing/Makefile.am: Add e-contact-print-envelope.c and
e-contact-print-envelope.h.
* printing/e-contact-print-envelope.c,
printing/e-contact-print-envelope.h: Added envelope printing.
2000-11-03 Federico Mena Quintero <federico@helixcode.com>
* gui/component/select-names/Makefile.am: Clean the idl-generated
files properly.
2000-11-02 Christopher James Lahey <clahey@helixcode.com>
* ename/.cvsignore, gui/minicard/.cvsignore: Removed these
unnecessary .cvsignores.
* gui/component/addressbook.c: Switch to using EAddressbookSearch
instead of custom quick search widget.
* gui/component/select-names/e-select-names.c: Made this do a
slightly better job of rendering names.
* gui/widgets/Makefile.am: Added e-addressbook-search.c and
e-addressbook-search.h.
* gui/widgets/e-addressbook-search.c,
gui/widgets/e-addressbook-search.h: New class that puts up an
entry and a combo box.
2000-11-01 Dan Winship <danw@helixcode.com>
* gui/component/e-ldap-storage.c (load_ldap_data):
(e_ldap_storage_add_server): Add "highlighted" flag to
evolution_storage_new_folder
2000-10-31 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.c (cursor_cb): Let the warning make sense
(compute_pid): remove
(local_record_from_ecard): Create local record from ecard - not finished
(local_record_from_uid): Obtain local_record from uid with the proper
e-book way
(set_status_cleared): Add empty callback
(add_archive_record): kill
(delete_archive_record): kill
(archive_record): Add empty callback
(conduit_get_gpilot_conduit): Update signal connects
* backend/pas/pas-backend-file.c (vcard_change_type): Function to determine
the type of change - not finished
(pas_backend_file_search_changes): Create a view and callback based on
how the cards have changed
(pas_backend_file_process_get_changes): Implement the get changes operation
for files
(pas_backend_file_process_client_requests): Add GetChanges method for
processing
* backend/pas/pas-book.c (pas_book_queue_get_changes): Add changes to
the list
(impl_Evolution_Book_get_changes): implement object method
(pas_book_get_epv): Add get changes to epv
(pas_book_respond_get_changes): Respond to the get changes operation
* backend/pas/pas-book.h: Add GetChanges PASOperation
* backend/idl/addressbook.idl: add get_changes and respond_get_changes
methods
* backend/ebook/e-book.c (e_book_get_changes): Client function
to a view of the changed objects
* backend/ebook/e-book.h: New prototype
2000-10-30 Kjartan Maraas <kmaraas@gnome.org>
* backend/e-book/e-card.c: Fixed marking of strings
for translation. Use "_(" instead of "_ (".
* gui/component/addressbook-factory.c: Add missing
calls to bindtextdomain() and textdomain noticed by
Dan Winship.
* gui/component/addressbook.c: Marked string for translation.
2000-10-27 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/Makefile.am, gui/search/Makefile.am,
printing/Makefile.am: Fixed these to include EXTRA_GNOME_CFLAGS.
* gui/component/select-names/e-select-names-manager.c: Turned off
newlines in header fields.
2000-10-26 Michael Meeks <michael@helixcode.com>
* printing/e-contact-print.c (e_contact_print_letter_tab),
(complete_sequence, e_contact_do_print_phone_list, lowify):
unsigned charness.
2000-10-25 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c (ldap_op_process_current): only
call the handler if the if we're connected, and if we fail to
connect finish the op and post a message.
(pas_backend_ldap_connect): add debug spew if DEBUG is defined.
(modify_card_handler): LDAP_RES_SEARCH_ENTRY => LDAP_SUCCESS.
(modify_card_handler): only perform the ldap_modify_s if we have a
list of modifications.
(get_cursor_handler): use ldap_error_to_response here.
(pas_backend_ldap_load_uri): use LDAP_PORT instead of the constant
389.
2000-10-23 Dan Winship <danw@helixcode.com>
* gui/component/select-names/Makefile.am (INCLUDES):
* gui/component/Makefile.am (INCLUDES): Update EVOLUTION_LOCALEDIR
* backend/pas/Makefile.am (INCLUDES):
* backend/ebook/Makefile.am (INCLUDES): Update GNOMELOCALEDIR.
2000-10-23 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.h: Use new libeconduit calls and
abstraction
* conduit/address-conduit.c: ditto
2000-10-23 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.c (pre_sync): Use e_pilot_map_read
(post_sync): Use e_pilot_map_write
* conduit/Makefile.am: Link libeconduit and not libical
2000-10-20 Michael Meeks <michael@helixcode.com>
* contact-editor/e-contact-editor.c (tb_save_and_close_cb):
* gui/component/addressbook.c (toggle_view_as_cb):
2000-10-20 JP Rosevear <jpr@helixcode.com>
* conduit/address-conduit.h: New structure of file - similar
to calendar/todo conduits
* conduit/address-conduit.c: ditto
* conduit/address-conduit-config.h: Config stuff for conduit
* conduit/.cvsignore: Update
* conduit/Makefile.am: Build fixes
* conduit/address-conduit-control-applet.desktop: Renamed
to e-address-conduit-control-applet.desktop
* conduit/address.conduit.in: Renamed to e-address.conduit.in
2000-10-19 Christopher James Lahey <clahey@helixcode.com>
* gui/widgets/e-addressbook-view.c (SPEC): Remove Family name
column since it's a bit weird. This also fixes the initial state
since all of the column choices were off by one.
2000-10-19 Ettore Perazzoli <ettore@helixcode.com>
* printing/Makefile.am (glade_DATA): Remove
`e-contact-print.glade.h'.
(EXTRA_DIST): Move here.
* gui/component/Makefile.am (glade_DATA): Remove
`ldap-server-dialog.glade.h'.
(EXTRA_DIST): Move here.
2000-10-19 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c: Change how the extension field acts when
converting delivery addresses to labels.
2000-10-18 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added the
function e_card_delivery_address_to_label.
* contact-editor/e-contact-editor-address.c: Fixed a potential
crash.
* contact-editor/e-contact-editor.c: Made this save the changed
data to the string version of the address.
2000-10-19 Michael Meeks <michael@helixcode.com>
* gui/component/addressbook.c (change_view_type): update to new
UI handler.
(update_view_type): split from (change_view_type).
(control_activate): add an update_view_type.
2000-10-18 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c: Change NAME_OR_ORG to return the
email address if both name and organization are taken.
* gui/component/select-names/e-select-names.c: Fixed up the spec
strings in this class. Removed the "cursor_mode" argument to
ETable since it's part of the spec now.
2000-10-17 Iain Holmes <iain@helixcode.com>
* contact-editor/contact-editor.glade: Change the initial dialog
visibility to FALSE
so the contact editor doesn't flash when it appears.
2000-10-16 Iain Holmes <iain@helixcode.com>
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_activate_dialog): Only allow one dialog
per manager.
2000-10-16 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/fulladdr.glade: Fixed a typo. Made this look a
bit better.
2000-10-15 Dan Winship <danw@helixcode.com>
* gui/component/select-names/Makefile.am:
* gui/component/Makefile.am: Remove CPPFLAGS since they just
duplicate flags that were already in INCLUDES.
* printing/Makefile.am (ecpsdir):
* gui/widgets/Makefile.am:
* contact-editor/Makefile.am: Move -D flags from CPPFLAGS to
INCLUDES so they don't override any CPPFLAGS set at configure
time.
2000-10-14 Michael Meeks <michael@helixcode.com>
* gui/component/addressbook.c (control_activate): if we are in
LDAP mode then merge in the extra few items, otherwise just merge
the standard thing; saves duplication.
2000-10-14 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook.oafinfo: Added
"evolution:shell-component-icon" property.
2000-10-14 Iain Holmes <iain@helixcode.com>
* gui/component/select-names/e-select-names.c
(e_select_names_manager_activate_dialog): Only allow one dialog
per id.
(e_select_names_manager_destroy): Destroy the hashtable.
(e_select_names_manager_init): Init the hashtable.
2000-10-13 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/fulladdr.glade, contact-editor/fulladdr.glade.h:
Rearranged these fields a bit more.
2000-10-13 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c,
gui/component/select-names/e-select-names.c,
gui/widgets/e-addressbook-view.c: Changed these for boolean
ascending attribute instead of int ascending attribute. Fixed
e-select-names to not use a column past the end of its array.
* contact-editor/e-contact-editor-address.c,
contact-editor/fulladdr.glade, contact-editor/fulladdr.glade.h:
Rearranged the address editor dialog.
2000-10-11 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c: Fixed the column
elements, the no-headers attribute and added a cursor-mode=line
attribute.
* gui/component/select-names/e-select-names.c,
gui/widgets/e-addressbook-view.c: Fixed the column elements here.
2000-10-11 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c,
gui/component/select-names/e-select-names.c,
gui/widgets/e-addressbook-view.c: Updated these to the new style
ETables.
2000-10-06 Not Zed <NotZed@HelixCode.com>
* gui/search/e-addressbook-search-dialog.c (get_widget): Removed
ondemand callback nonsense from rule_context_load().
2000-10-05 Michael Meeks <michael@helixcode.com>
* contact-editor/e-contact-editor.c (create_ui): upd.
(e_contact_editor_init): upd.
* gui/component/addressbook.c (control_activate_cb): upd.
(control_deactivate): kill.
(control_activate): upd.
2000-09-22 Michael Meeks <michael@helixcode.com>
* gui/component/addressbook.c (control_activate): update.
* contact-editor/e-contact-editor.c (create_ui): upd.
Fri Sep 29 07:33:54 2000 Christopher James Lahey <clahey@helixcode.com>
* gui/widgets/e-minicard.c, gui/widgets/e-minicard.h: Made it so
that minicard doesn't write out changes to the backend unless
something's actually changed.
Tue Sep 26 16:28:47 2000 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c: Make sure that card->name and
card->full_name are always valid.
* contact-editor/e-contact-editor.c: Removed some unused
variables.
2000-09-22 Matt Bissiri <bissiri@eecs.umich.edu>
* contact-editor/e-contact-editor-fullname.c (extract_info): If
(editor->name == NULL), store ptr to newly allocated ECardName in
editor->name, not just in a stack variable. This fixes a crash
which happened when you click "New", then click "Full Name...",
then enter name, then click "OK".
* backend/ebook/e-card.c (e_card_name_to_string): Add
g_return_val_if_fail.
2000-09-25 Jeffrey Stedfast <fejj@helixcode.com>
* gui/widgets/Makefile.am:
* gui/component/Makefile.am:
* contact-editor/Makefile.am:
* printing/Makefile.am: Look for ename in /e-util/ename instead of
/addressbook/ename
* backend/ebook/e-card.c: Updated to include e-util/ename/*.h
* ename: Moved to /e-util so it could be shared
* Makefile.am (SUBDIRS): took out ename
2000-09-25 Nat Friedman <nat@helixcode.com>
* ename/e-name-western-tables.h: Added a ton of new prefixes and
suffixes.
2000-09-22 Michael Meeks <michael@helixcode.com>
* gui/component/addressbook.c (control_activate): update.
* contact-editor/e-contact-editor.c (create_ui): upd.
2000-09-22 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c: lots of changes. flesh out the
remove/modify/create functions. add another flag for the property
table, PROP_DN, which makes it easy for us to determine when we
need to create a new DN for a record when we're modifying. also
add a ber_func to the table for PROP_TYPE_LIST fields, which fills
in the list of bvalues that we send to the ldap server. The
add/modify/delete stuff hasn't been tested yet, and it hopelessly
complex (yay ldap).
(ldap_search_handler): act synchronous when ldap_search responds
with -1.
(view_destroy): use pas_book_view_notify_status_message.
(ldap_op_process_current): same
(ldap_op_process): same
(poll_ldap): same
(ldap_search_handler): same
2000-09-22 Chris Toshok <toshok@helixcode.com>
* backend/ebook/e-card-simple.h: add
E_CARD_SIMPLE_FIELD_FAMILY_NAME to the enum.
* backend/ebook/e-card-simple.c (field_data): add
E_CARD_SIMPLE_FIELD_FAMILY_NAME.
(e_card_simple_get): add getter for FAMILY_NAME.
2000-09-22 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c: Made addresses be quoted printable again
so that they will encode properly if they have carriage returns in
them. This is possible now because of a fix in libversit.
2000-09-22 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-book-view-listener.c,
backend/ebook/e-book-view-listener.h, backend/ebook/e-book-view.c,
backend/ebook/e-book-view.h, backend/idl/addressbook.idl,
backend/pas/pas-book-view.c, backend/pas/pas-book-view.h: Added a
function to set the status message associated with a given view.
This is not yet implemented in the gui.
2000-09-22 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-book.c, backend/ebook/e-book.h,
backend/idl/addressbook.idl, backend/pas/pas-backend-file.c,
backend/pas/pas-backend-ldap.c, backend/pas-backend.c,
backend/pas/pas-backend.h, backend/pas/pas-book.c,
backend/pas/pas-book.h: Added a function to query static
capabilities (capabilities that can be reported immediately) and
implemented them in the 2 servers.
* gui/component/addressbook.c: Added a View All button and a Stop
button. Sorted out the new directory server stuff a bit.
* gui/widgets/e-addressbook-model.c,
gui/widgets/e-addressbook-model.h: Cleaned up a bit. Added a stop
function. Check for capabilities before deciding whether to load
all cards when initially viewed.
* gui/widgets/e-addressbook-view.c,
gui/widgets/e-addressbook-view.h: Added stop and view all
functions.
* gui/widgets/e-minicard-view-widget.c,
gui/widgets/e-minicard-view-widget.h,
gui/widgets/e-minicard-view.c, gui/widgets/e-minicard-view.h:
Added a stop function. Check for capabilities before deciding
whether to load all cards when initially viewed.
2000-09-21 Michael Meeks <michael@helixcode.com>
* gui/component/addressbook.c (control_activate): remove _UIHandler
2000-09-21 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/load-pine-addressbook.c: Added a missing include
of ctype.h.
* backend/pas/pas-backend-file.c: Fixed a problem where using a
GList was causing us to not be reentrant. We now use an EList
here and so now this is reentrant. This should fix the "wombat
crashes every time you run evolution" bug.
* contact-editor/e-contact-editor.c: Fixed a type mismatch.
2000-09-21 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/load-pine-addressbook.c: Make this work when a
field is spread across multiple lines.
2000-09-20 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added a
wants_html field to cards. Uses "x-mozilla-html".
* contact-editor/Makefile.am: Added definition of
EVOLUTION_DATADIR.
* contact-editor/contact-editor.glade: Make Wants HTML check
button visible.
* contact-editor/e-contact-editor.c,
contact-editor/e-contact-editor.h: Make Wants HTML check button
active. Fix UI stuff to use XML. Set parent window of
confirm_delete dialog.
* gui/widgets/e-addressbook-view.c, gui/widgets/e-minicard.c: Set
the parent window of the confirm_delete dialog.
2000-09-20 Christopher James Lahey <clahey@helixcode.com>
* gui/widgets/e-addressbook-view.c: Fixed display of the minicards
when the addressbook was first loading. (It was overwriting a
string with NULL during init.)
2000-09-19 Dan Winship <danw@helixcode.com>
* gui/search/Makefile.am (ruledir): Use $(datadir), not
$(prefix)/share
2000-09-18 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/Makefile.am, contact-editor/Makefile.am,
ename/Makefile.am, gui/component/Makefile.am,
gui/widgets/Makefile.am: Added $(EXTRA_GNOME_CFLAGS) and
$(EXTRA_GNOME_LIBS). Removed unneeded libraries.
* backend/ebook/e-card.c, backend/pas/pas-backend-file.c,
contact-editor/e-contact-editor-address.c,
contact-editor/e-contact-editor-categories.c,
contact-editor/e-contact-editor-categories.h,
contact-editor/e-contact-editor-fullname.c,
contact-editor/e-contact-editor.c,
contact-editor/e-contact-save-as.c, ename/e-address-western.c,
ename/test-ename-western-gtk.c,
gui/component/addressbook-factory.c, gui/component/addressbook.c,
gui/component/e-cardlist-model.h, gui/component/e-ldap-storage.c,
gui/component/select-names/e-select-names-bonobo.c,
gui/component/select-names/e-select-names-manager.c,
gui/component/select-names/e-select-names-model.c,
gui/component/select-names/e-select-names-table-model.c,
gui/component/select-names/e-select-names-table-model.h,
gui/component/select-names/e-select-names-text-model.h,
gui/component/select-names/e-select-names.c,
gui/component/select-names/e-select-names.h,
gui/search/e-addressbook-search-dialog.c,
gui/widgets/e-addressbook-model.h,
gui/widgets/e-addressbook-view.c, gui/widgets/e-minicard-label.c,
gui/widgets/e-minicard-view-widget.c,
gui/widgets/e-minicard-view-widget.h,
gui/widgets/e-minicard-view.c, gui/widgets/e-minicard-view.h,
gui/widgets/e-minicard-widget.h, gui/widgets/e-minicard.c,
gui/widgets/test-minicard-label.c, gui/widgets/test-reflow.c,
printing/e-contact-print.c: Fixed the #include lines to deal
properly with gal.
2000-09-15 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.h,
contact-editor/e-contact-save-as.h,
gui/widgets/e-addressbook-model.h,
gui/widgets/e-minicard-view-widget.h,
gui/widgets/e-minicard-view.h, gui/widgets/e-minicard.c,
gui/widgets/e-minicard.h: Fixed the paths of some .h #includes.
* gui/component/addressbook.c: Removed all of the code to actually
create and display the correct view of the addressbook and moved
it to the new class gui/widgets/e-addressbook-view.c.
* gui/widgets/Makefile.am: Added everything necessary for
e-addressbook-view.c and e-addressbook-view.h.
* gui/widgets/e-addressbook-view.c,
gui/widgets/e-addressbook-view.h: New class to deal with actual
display of addresses and switching between card view and table
view.
* gui/widgets/e-minicard-view-widget.c: Made this deal more
gracefully with having the book set to NULL.
2000-09-16 Michael Meeks <michael@helixcode.com>
* gui/component/select-names/e-select-names.c: fix broken include.
* gui/component/Makefile.am (INCLUDES): define datadir.
(evolution_addressbook_SOURCES): remove e-addressbook-model.[ch]
* gui/component/addressbook.c (control_activate): use datadir.
2000-09-16 Ettore Perazzoli <ettore@helixcode.com>
* gui/widgets/Makefile.am (gladedir): Define.
(glade_DATA): Install `alphabet.glade'.
(EXTRA_DIST): Define.
* gui/component/Makefile.am (glade_DATA): Remove `alphabet.glade'.
(EXTRA_DIST): Remove `alphabet.glade.h'.
* gui/widgets/Makefile.am (libeminicard_a_SOURCES): Add
`e-addressbook-model.c' and `e-addressbook-model.h'. I hope this
is what Chris meant to do.
* gui/component/Makefile.am (INCLUDES): Add
`-I$(top_srcdir)/addressbook/gui/widgets'.
(evolution_addressbook_SOURCES): Remove `e-addressbook-model.c'
and `e-addressbook-model.h'.
* gui/component/select-names/e-select-names.c: #include
"e-addressbook-model.h" from "addressbook/gui/widgets" instead of
"addressbook/gui/component", as it has been moved there.
2000-09-15 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c: split all the ldap operations
into 2 halves, a handler, and destructor, and create a structure
containing two function pointers and any data they need. this
allows us queue up pending operations (since the LDAP*'s are no
longer view specific. there's one per backend.) also, add
support for restarting async operations if the SERVER DOWN error
isn't communicated until sometime after the handler is called (as
is the case with the async search stuff.)
2000-09-14 Dan Winship <danw@helixcode.com>
* gui/component/addressbook-factory.c (main): Call unicode_init
for e-font stuff.
2000-09-14 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/Makefile.am, gui/widgets/Makefile.am: Added
$(GNOME_PRINT_LIBS) to all of the test files in these directories.
2000-09-14 Michael Meeks <michael@helixcode.com>
* gui/component/Makefile.am (evolution_addressbook_LDADD): fix path.
* gui/component/addressbook.c: update include.
* gui/component/addressbook-factory.c: update include.
* gui/widgets/e-minicard-view.h: update include.
* gui/search/e-addressbook-search-dialog.c: update include path.
2000-09-13 Michael Meeks <michael@helixcode.com>
* contact-editor/e-contact-editor.c (e_contact_editor_init): hack.
(create_toolbar): ditto.
2000-09-07 Michael Meeks <michael@helixcode.com>
* gui/component/addressbook.c: Radicaly update UI handler code.
2000-09-13 Christopher James Lahey <clahey@helixcode.com>
* gui/widgets/*, gui/minicard/*: Moved gui/minicard to
gui/widgets, except for e-reflow.c, e-reflow.h, e-reflow-sorted.c,
and e-reflow-sorted.h.
* gui/widgets/Makefile.am: Added e-reflow to the INCLUDES list and
libereflow.a to a bunch of LDADD lines.
* gui/component/Makefile.am (evolution_addressbook_LDADD): Added
libereflow.a here.
* gui/Makefile.am (SUBDIRS): Replaced minicard with widgets.
2000-09-12 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/select-names/Makefile.am: Add space after `-I'
when invoking `orbit-idl'.
2000-09-12 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/Makefile.am (EXTRA_DIST): Remove `ui.xml'.
2000-09-11 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Fixed a crash error.
2000-09-11 Christopher James Lahey <clahey@helixcode.com>
* ename/e-address-western.c: Fixed some warnings.
2000-09-11 Jesse Pavel <jpavel@helixcode.com>
* ename/e-address-western.c: fixed certain address parsing
problems.
2000-09-11 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/fulladdr.glade: Made this a bit better balanced.
* gui/component/addressbook.c: Make the toolbar button for find do
the same thing that the menu item for search does.
* gui/search/e-addressbook-search-dialog.c: Made the top half of
this not expand.
2000-09-11 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
Removed a bunch of redundant code. Made it so that when you set
an address label, it sets the delivery address as well. Added
functions to set and get the delivery address.
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added code to
convert and address label to a delivery address.
* contact-editor/Makefile.am: Added e-contact-editor-address.[ch],
fulladdr.glade, fulladdr.glade.h.
* contact-editor/contact-editor.glade,
contact-editor/e-contact-editor-strings.h: Switched from a label
to a button to show the parsed address.
* contact-editor/e-contact-editor-address.c,
contact-editor/e-contact-editor-address.h: New class to implement
the parsed address dialog.
* contact-editor/e-contact-editor-fullname.c,
contact-editor/e-contact-editor-fullname.h: Added const to the
_new function.
* contact-editor/e-contact-editor.c: Implemented clicking on the
address button.
* contact-editor/fulladdr.glade, contact-editor/fulladdr.glade.h:
New glade files for the parsed address dialog.
* contact-editor/fullname-strings.h, fullname.glade: Changed these
accellabels to labels.
* ename/Makefile.am: Added e-address-western.c.
* ename/e-address-western.c: Fixed some warnings.
2000-09-10 Christopher James Lahey <clahey@helixcode.com>
* ename/e-address-western.c: Added by Jesse.
2000-09-08 Lauris Kaplinski <lauris@helixcode.com>
* gui/minicard/e-minicard-label.c (e_minicard_label_construct):
Use canvas default font
* gui/minicard/e-minicard.c (e_minicard_realize): Ditto
(get_left_width): Ditto
2000-09-08 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c: Fixed a few warnings.
2000-09-02 Lauris kaplinski <lauris@helixcode.com>
* contact-editor/e-contact-editor-categories.c: e_utf8 wrappers
* contact-editor/e-contact-editor.c: e_utf8 wrappers
2000-09-01 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/e-ldap-storage.c (load_ldap_data): Updated for the
extra arg now needed by `evolution_storage_new_folder()'.
(e_ldap_storage_add_server): Likewise.
2000-08-31 Ettore Perazzoli <ettore@helixcode.com>
* conduit/Makefile.am (INCLUDES): Add `BONOBO_GNOME_CFLAGS' and
`-I$(top_srcdir)'.
2000-08-31 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/Makefile.am: Install load-gnomecard-addressbook
and load-pine-addressbook.
2000-08-30 Lauris Kaplinski <lauris@helixcode.com>
* printing/e-contact-print.c: Countless small changes for gnome-print 0.21+
2000-08-30 Dan Winship <danw@helixcode.com>
* gui/component/addressbook.oafinfo: Add a name to the minicard
viewer.
2000-08-29 Dan Winship <danw@helixcode.com>
* backend/ebook/e-book.c:
* backend/ebook/test-client.c:
* backend/ebook/test-client-list.c:
* backend/ebook/load-gnomecard-addressbook.c:
* backend/ebook/load-pine-addressbook.c:
* backend/pas/pas-book-factory.c:
* conduit/address-conduit.h: Remove USING_OAF checks
2000-08-28 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Use the right argument name to turn
on grid lines.
2000-08-26 JP Rosevear <jpr@helixcode.com>
* gui/minicard/Makefile.am: Comment out minicard-view-test
since its gnorba dependent
2000-08-26 JP Rosevear <jpr@helixcode.com>
* gui/component/addressbook-component.c: Remove gnorba stuff
* gui/minicard/e-minicard-control.c (e_minicard_control_factory_init):
ditto
* gui/component/addressbook.c: ditto
* gui/component/addressbook-factory.c: ditto
2000-08-25 Christopher James Lahey <clahey@helixcode.com>
* demo/* Removed the demo directory since it's no longer used.
2000-08-26 JP Rosevear <jpr@helixcode.com>
* gui/minicard/Makefile.am: Remove gnorba stuff
* gui/minicard/e-minicard-control.gnorba: Kill
2000-08-26 JP Rosevear <jpr@helixcode.com>
* gui/component/addressbook.gnorba: Kill
* gui/component/Makefile.am: Remove gnorba stuff
2000-08-25 Dan Winship <danw@helixcode.com>
* gui/component/Makefile.am (evolution_addressbook_LDFLAGS): Add
-export-dynamic so libglade will be able to resolve custom widget
callbacks.
2000-08-23 Lauris Kaplinski <lauris@helixcode.com>
* backend/pas/pas-backend-file.c (func_contains): Use e_utf8_strstrcase
* contact-editor/e-contact-editor-fullname.c (fill_in_field): Use e_utf8 wrapper
(extract_field): Same
* contact-editor/e-contact-editor.c (full_name_clicked): Don't crash
* ename/Makefile.am: Link demo with libeutil.la
* ename/test-ename-western-gtk.c (full_changed_cb): Use e_utf8 wrapper
* gui/component/addressbook.c (find_contact_cb): Use e_utf8 wrapper
(search_entry_activated): Same
2000-08-22 Christopher James Lahey <clahey@helixcode.com>
* gui/search/e-addressbook-search-dialog.c: Fix an error in the
arguments to rule_context_load.
* backend/ebook/e-card.c: Fix this to not mess up if the person
passes a VCard with a carriage return in the mailing address.
2000-08-14 Not Zed <NotZed@HelixCode.com>
* gui/search/addresstypes.xml: Fixed fullname->full_name for
search field.
* gui/search/e-addressbook-search-dialog.c (get_widget): Check we
actually got any parts to build the dialogue with.
2000-08-13 Not Zed <NotZed@HelixCode.com>
* gui/component/addressbook-component.c (owner_set_cb): Set the
global_shell_client nastyhack when we know it.
This is only required to link with the filter code ...
* gui/component/Makefile.am (evolution_addressbook_LDADD): Added
libfilter.a to the link line.
* gui/search/Makefile.am (noinst_LIBRARIES): Change library name
from libaddressbooksearchdialog to libaddressbooksearch, as used
elsewhere.
* gui/search/e-addressbook-search-dialog.c (get_widget):
Implement.
(get_query): Likewise.
(e_addressbook_search_dialog_destroy): Unref filter stuff when
done.
* gui/component/addressbook.c (control_deactivate): Added chris's
patch to put the meny in
2000-08-22 Lauris Kaplinski <lauris@helixcode.com>
* contact-editor/e-contact-editor.c: Use e_utf8 wrappers everywhere
2000-08-22 Christopher James Lahey <clahey@helixcode.com>
* backend/e-card.h: Started adding a time zone field to ECard.
* gui/component/e-addressbook-model.c: Added
e_table_model_pre_change where appropriate.
* gui/minicard/e-minicard-control.c: Added a ref and unref pair.
2000-08-22 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Linked in the search dialog again.
It looks like some changes in the shell made this not work.
2000-08-19 Christopher James Lahey <clahey@helixcode.com>
* conduit/address-conduit.c, conduit/address-conduit.h: Changed
this to use ECardSimple.
* contact-editor/e-contact-editor.c: Fixed a memory leak.
* gui/component/addressbook.c: Added stuff to the right click
menu. Activated the new search dialog that doesn't quite work
yet.
* gui/minicard/e-minicard-view.c: Fixed some run time warnings.
2000-08-15 Larry Ewing <lewing@helixcode.com>
* gui/minicard/e-minicard.c (e_minicard_event): use style colors
for the selected state. This doesn't properly redraw the minicard
when there is a style_change event, that is next.
(e_minicard_realize): use style colors.
2000-08-14 Peter Williams <peterw@helixcode.com>
* backend/pas/pas-backend-file.c: Include the proper db1/db.h
as in RedHat 7.0 -- patch from Kenny Graunke <kwg@teleport.com>
2000-08-13 Chris Toshok <toshok@helixcode.com>
* conduit/Makefile.am (libaddress_conduit_la_SOURCES): add
address-conduit.h
* Makefile.am (CONDUIT_SUBDIR): only set subdir if
ENABLE_PILOT_CONDUITS is set.
2000-08-13 Chris Toshok <toshok@helixcode.com>
* Makefile.am (SUBDIRS): add conduit subdir.
2000-08-13 Chris Toshok <toshok@helixcode.com>
* conduit/address-conduit.c (conduit_get_gpilot_conduit): add
special oaf initialization hack so conduit can find wombat, and
accept all cookies so that we can actually talk to oaf.
2000-08-13 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-file.c: Fixed a typo that cause the
wrong field to be searched.
* gui/component/select-names/e-select-names.c: Made the select
names dialog only display entries with email addresses.
2000-08-12 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/contact-editor.glade: Fixed a typo in the name of
the first phone entry.
2000-08-12 Christopher James Lahey <clahey@helixcode.com>
* gui/search/Makefile.am,
gui/search/e-addressbook-search-dialog.c,
gui/search/e-addressbook-search-dialog.h: A few small interface
fixes.
* gui/component/Makefile.am: Link in the addressbook search
dialog.
2000-08-12 Christopher James Lahey <clahey@helixcode.com>
* gui/Makefile.am: Added the search directory.
* backend/ebook/e-book.c: Fixed a potential crash.
* gui/minicard/e-reflow-sorted.h: Fixed an include line.
* gui/search/.cvsignore, gui/search/Makefile.am: New files.
* gui/search/e-addressbook-search-dialog.c: Fixed compilation.
2000-08-12 Christopher James Lahey <clahey@helixcode.com>
* printing/Makefile.am: Ettore fixed compilation.
2000-08-12 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/.cvsignore: Added load-gnomecard-addressbook.
2000-08-12 Christopher James Lahey <clahey@helixcode.com>
* gui/search/e-addressbook-search-dialog.c,
gui/search/e-addressbook-search-dialog.h: Made this into a Gtk
object.
2000-08-12 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-book-view.c: Ref our book view listener.
* gui/component/addressbook.c: Updated to use new minicard view
widget.
* gui/minicard/Makefile.am: Added e-minicard-view-widget.c and
e-minicard-view-widget.h.
* gui/minicard/e-minicard-view-widget.c,
gui/minicard/e-minicard-view-widget.h: New class that's just a
minicard view in an ECanvas.
* gui/search/e-addressbook-search-dialog.c: New file for
implementing a search dialog.
2000-08-11 Chris Toshok <toshok@helixcode.com>
* conduit/address-conduit.c (transmit): implement code to encode
the first email address and send to the pilot.
(get_phone_label_by_flag): rename find_phone_label_for_flags to
this, and implement by calling get_phone_label_by_name.
2000-08-11 Chris Toshok <toshok@helixcode.com>
* conduit/address-conduit.c (ecard_from_remote_record): add code
for handling email addresses from pilot (which stores it as a
phone number entry. go figure.)
(check_for_slow_setting): #if 0 out, since we don't use it (yet).
(update_record): un #if 0 the code to handle the case where the
pilot info has changed for a local record.
(merge_ecard_with_remote_record): implement function, but for now
just return the existing (desktop) record - we still don't allow
merge from the pilot.
2000-08-10 Christopher James Lahey <clahey@helixcode.com>
* gui/search/addresstypes.xml: Changed a couple of input field
names.
2000-08-10 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook-component.c: Remove prototype for
`setup_ldap_storage()', which shouldn't be here anyway.
2000-08-10 Christopher James Lahey <clahey@helixcode.com>
* gui/search/, gui/search/addresstypes.xml: New search dialog for
addressbook.
2000-08-10 Dan Winship <danw@helixcode.com>
* gui/component/addressbook-component.c (owner_set_cb): Update for
changed prototype, pass evolution_homedir arg to
setup_ldap_storage.
* gui/component/e-ldap-storage.c (setup_ldap_storage): Now takes
an evolution_homedir arg, uses that to generate the path to the
ldapservers.xml file, and stores the result in a static variable.
(e_ldap_storage_add_server, e_ldap_storage_remove_server): Use that
static variable rather than hardcoding the path to the file.
2000-08-10 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-file.c: Fixed any search to not crash on
missing phone numbers or email addresses.
2000-08-09 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard-control.c: Added a button to save to
your addressbook.
2000-08-09 Cody Russell <bratsche@gnome.org>
* gui/component/addressbook.c: Make the toolbar honor the user's
gnomecc settings for detachable toolbars.
2000-08-09 Nat Friedman <nat@helixcode.com>
* ename/e-name-western-tables.h: Added some military prefixes.
2000-08-09 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Fixed a warning.
2000-08-09 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook.c (control_activate): Add the stock
print icon to the print item.
2000-08-09 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook.c (control_activate): Put the print
item in the right placeholder so that it gets the right position
in the "File" menu.
(control_deactivate): Updated accordingly.
2000-08-09 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c, gui/minicard/e-minicard.c: Changed
e_popup_menu_run call to match the new arguments.
* gui/component/addressbook.oafinfo: Fixed this file to work
properly.
* gui/minicard/e-minicard-control.c: Use the correct oafinfo ID
here. Also cleaned up the code a bit with the help of Michael
Meeks.
2000-08-08 Chris Toshok <toshok@helixcode.com>
* gui/component/e-addressbook-model.c (e_addressbook_model_init):
use x-evolution-any-field.
* gui/component/addressbook.c (search_entry_activated): use
x-evolution-any-field.
(change_view_type): same.
* gui/minicard/e-minicard-view.c (e_minicard_view_init): set query
to x-evolution-any-field.
* backend/pas/pas-backend-ldap.c (func_contains): support
x-evolution-any-field for matching any evolution supported field.
* backend/pas/pas-backend-file.c (compare_email): switch to using
ECardSimple calls.
(compare_phone): same.
(compare_address): same.
(entry_compare): switch to using ECardSimple calls, and support a
'x-evolution-any-field' wildcard field.
(vcard_matches_search): use an ECardSimple.
2000-08-07 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Removed the next and prev
toolbar buttons since they don't do anything.
2000-08-07 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/contact-editor.glade,
contact-editor/e-contact-editor.c: Fixed the tab order to not
repeat the web page address field.
2000-08-07 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Fixed the tab order for this
dialog.
2000-08-05 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c: Fixed a warning.
* backend/ebook/e-card.c: Cast to (char *) in
e_card_load_cards_from_file since libversit isn't const correct.
* backend/pas/pas-backend-file.c: Fixed a warning.
2000-08-04 Michael Meeks <michael@helixcode.com>
* gui/component/addressbook.c (control_activate): unref.
* demo/addressbook.c (control_activate): unref.
2000-08-02 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c,
gui/component/e-addressbook-model.c: Emit "model_pre_change"
signal as appropriate.
2000-08-02 Christopher James Lahey <clahey@helixcode.com>
* gui/component/e-addressbook-model.c: Adapted this to supply the
new append_row API of ETableModel.
2000-07-31 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Changed the default set of columns.
2000-07-29 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/Makefile.am: Added load-gnomecard-addressbook
compilation.
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added
e_card_load_cards_from_file helper function to load multiple cards
from a single file.
* backend/ebook/load-gnomecard-addressbook.c: New file to load
vcard files. I think this is the format that gnomecard uses so if
you copy your gnomecard file to gnomecard.vcf and then run this
program in the same directory, it'll copy all your gnome contacts
into evolution. It needs to be changed to take a filename as a
parameter. Some fields (phone and address information, for
example) aren't displayed properly, but are saved. This is new
code, so some other than phone and address may be lost.
2000-07-28 Ettore Perazzoli <ettore@helixcode.com>
* backend/pas/Makefile.am: Add `pas-backend-ldap.c' and
`pas-backend-ldap.h' to `EXTRA_DIST' so they get distributed even
if the OpenLDAP support is not enabled.
2000-07-27 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/load-pine-addressbook.c: Changed the URI to load
to.
2000-07-26 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard-widget-test.c: Fixed a warning.
2000-07-26 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c (view_destroy): wait to free the
view until we've taken care of freeing its internals. also, close
the ldap connection here.
(pas_backend_ldap_connect): rename p_b_l_ensure_connected to this,
since it's always called when we create a view.
(pas_backend_ldap_build_all_cards_list): open an ldap connection
in this function and close it at the end.
(poll_ldap): make sure to call ldap_unbind to close the view's
connection here.
(pas_backend_ldap_search): call pas_backend_ldap_connect here -
ldap_unbind will either be called from poll_ldap or from
view_destroy.
(pas_backend_ldap_get_vcard): the PASBackendLDAP no longer has an
LDAP*.
2000-07-26 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_build_all_cards_list): add support for user settable scope.
(pas_backend_ldap_search): same.
(pas_backend_ldap_load_uri): same.
2000-07-26 Dan Winship <danw@helixcode.com>
* gui/component/addressbook.oafinfo: lowercasify the
supported_mime_types
2000-07-25 Chris Toshok <toshok@helixcode.com>
* backend/ebook/e-card-types.h: add enum for e-card pilot status.
* conduit/address-conduit.c: #ifdef out all the archiving code with SUPPORT_ARCHIVING.
(purge): implement correctly - deleting ecards whose pilot status is DELETED.
(set_status): implement.
(set_pilot_id): add gtk_main call here to change commit_card into a synchronous
(delete_all): implement correctly - don't delete the records, just set their status to DELETED.
(local_record_from_ecard): get the current status from the ecard.
* backend/ebook/e-card.c (e_card_get_vcard): add vcard support for pilot status.
(parse_pilot_status): new function.
(e_card_class_init): add pilot status object arg.
(e_card_set_arg): add pilot status support.
(e_card_get_arg): same.
(e_card_init): initialize pilot_status to 0.
2000-07-25 Chris Toshok <toshok@helixcode.com>
* conduit/address-conduit.c: add comment headers to signals that
didn't have any.
2000-07-25 Chris Toshok <toshok@helixcode.com>
* conduit/address-conduit.c (start_address_server): use the user's
Contact db. not toshok's.
2000-07-25 Michael Meeks <michael@helixcode.com>
* backend/ebook/load-pine-addressbook.c (book_open_cb): check we
opened ok.
2000-07-25 Seth Alves <alves@hungry.com>
* ename/Makefile.am (libename_static_la_LDFLAGS): build static
version of the library for address conduit to use
* backend/ebook/Makefile.am: build a static version of the library
to link into the conduit
2000-07-25 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c: Added a #define for
"X-EVOLUTION-PILOTID". Added a parse_pilot_id to read pilot id's
in properly from VCards. Rearranged some field orders. Added a
get_arg case for ARG_PILOTID. Initialize pilot_id field to 0.
2000-07-24 Chris Toshok <toshok@helixcode.com>
* backend/ebook/e-card.h: add pilot_id.
* backend/ebook/e-card.c (e_card_get_vcard): add support for
X-EVOLUTION-PILOTD vcard field.
(e_card_class_init): add pilot_id arg.
(e_card_set_arg): handle pilot_id arg.
2000-07-23 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-book-view-listener.c: Remove the idle handler
when we're destroyed.
* printing/e-contact-print.c: Fixed the spacing on the card
header.
2000-07-20 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.oafinfo: Fixed the oaf info.
* gui/minicard/.cvsignore, gui/minicard/Makefile.am,
gui/minicard/e-minicard-widget-test.c: Added a test for the
minicard widget.
* gui/minicard/e-minicard-control.c: Fixed the mime type.
* gui/minicard/e-minicard.c: Fixed some crashes if your parent
isn't a minicard view.
* gui/minicard/e-minicard-control.oafinfo: Removed.
2000-07-20 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook-component.c (factory_fn): Update for
the new `evolution_shell_component_new()'.
2000-07-19 Fatih Demir <kabalak@gmx.net>
* conduit/address-conduit-control-applet.desktop:
Added the Turkish desktop entry.
2000-07-18 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard-control.c: Added "text/vCard" to the
list of mime types we support.
2000-07-18 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/Makefile.am: Added
gui/minicard/e-minicard-control.c,
gui/minicard/e-minicard-control.h,
gui/minicard/e-minicard-widget.c, and
gui/minicard/e-minicard-widget.h.
* gui/minicard/e-minicard-control.c,
gui/minicard/e-minicard-control.h,
gui/minicard/e-minicard-widget.c,
gui/minicard/e-minicard-widget.h: Got these to compile.
* gui/minicard/e-minicard-control.gnorba,
gui/minicard/e-minicard-control.oafinfo: Copied directly from
bonobo-clock-control. These aren't done yet.
2000-07-18 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard-control.c,
gui/minicard/e-minicard-control.h,
gui/minicard/e-minicard-widget.c,
gui/minicard/e-minicard-widget.h: New files for using a minicard
as a widget or a bonobo control.
2000-07-14 Chris Toshok <toshok@helixcode.com>
* gui/component/e-ldap-storage.c (ldap_server_foreach): duh.
don't save the port in the host slot either.
2000-07-13 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-confirm-delete.glade,
contact-editor/e-contact-editor-confirm-delete.glade.h: Added
these.
2000-07-13 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Switched the order of compilation of printing and
contact-editor.
* contact-editor/Makefile.am: Added printing libraries and a
confirm delete dialog glade file.
* contact-editor/e-contact-editor.c,
contact-editor/e-contact-editor.h: Enabled the delete and print
functions as well as providing a confirm delete dialog to the
outside world.
* gui/component/addressbook.c: Made the delete button on new cards
active.
* gui/minicard/Makefile.am: Added printing libraries to a number
of test programs.
* gui/minicard/e-minicard.c: Added print and delete to the right
click menu. Made the delete button on the card editor active.
* printing/e-contact-print.c, printing/e-contact-print.h: Added a
function to print a single card.
2000-07-12 Chris Toshok <toshok@helixcode.com>
* gui/component/e-ldap-storage.c (ldap_server_foreach): oops. fix
typo that was saving the port in the rootdn spot.
(save_ldap_data): make this a bit safer - writing to a new file
and renaming it.
(load_ldap_data): make this a bit smarter - if parsing the
ldapservers.xml file fails and there's a .new file there,
rename it.
2000-07-12 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-file.c: Do case insensitive compares.
* addressbook/gui/component/addressbook.c: Make quick search
search both name and company name.
2000-07-12 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Add icons to the toolbars.
2000-07-12 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/Makefile.am: Added installation of arrow.png.
* contact-editor/e-contact-editor.c: Use EVOLUTIONDIR #define.
2000-07-11 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Removed an unused function
2000-07-10 Dan Winship <danw@helixcode.com>
* gui/component/select-names/Makefile.am (EXTRA_DIST): add idl
file to EXTRA_DIST
2000-07-10 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook.c (control_activate): Remove the
SelectNames test.
2000-07-10 Peter Williams <peterw@curious-george.helixcode.com>
* gui/component/select-names/e-select-names-model.c: (Clahey's fix)
Make multiple addresses be concatenated correctly.
2000-07-09 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c,
gui/component/select-names/e-select-names.c,
gui/component/select-names/e-select-names.h: Switched from ETable
to ETableScrolled.
* addressbook/gui/minicard/e-minicard.c: Don't display mailer or
"name or org" fields.
2000-07-09 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
Added a field that gives the name if it exists and the company
name otherwise.
* gui/component/e-addressbook-model.c: Formatting changes.
* gui/component/select-names/e-select-names-table-model.c: Added
stripping of names and display of company name if name doesn't
exist.
* gui/component/select-names/e-select-names.c: Fixed up the
display so that we display both name and email address.
2000-07-09 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names/e-select-names-model.c: Fixed a small
off by one error that was causing an extra character to get
deleted sometimes.
2000-07-09 Anders Carlsson <andersca@gnu.org>
* gui/minicard/test-reflow.c (allocate_callback): Fix off by one bug with
scroll region setting.
(resize): Likewise.
(main): Put the contacts list in an EScrolledFrame instead of using a
separate GtkScrollbar.
* gui/minicard/e-reflow.c (e_reflow_event): Don't change mouse cursor and
don't allow drags on dividers that aren't visible.
* gui/component/addressbook.c (allocate_callback): Fix off by one bug with
scroll region setting.
(resize): Likewise.
(create_minicard_view): Put the contacts list in an EScrolledFrame instead of
using a separate GtkScrollbar.
2000-07-09 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Removed unused do_nothing_cb
function.
* gui/component/select-names/e-select-names-manager.c,
gui/component/select-names/e-select-names-manager.h: Made the OK
and Cancel buttons in the ESelectNames dialog we create work
properly.
* gui/component/select-names/e-select-names-model.c,
gui/component/select-names/e-select-names-model.h: Added
e_select_names_model_duplicate.
* gui/component/select-names/e-select-names-text-model.c: Made the
text be set correctly if there's already data in the source when
the text model is created.
* gui/component/select-names/e-select-names.c,
gui/component/select-names/e-select-names.h: Removed handling of
the buttons (the user of this dialog will have to handle them.)
Added e_select_names_get_source. Fixed some typos.
2000-07-09 Not Zed <NotZed@HelixCode.com>
* gui/component/addressbook.c: Link the toolbar print button to
the print callback.
2000-07-08 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names/e-select-names.c
(e_select_names_clicked): Hitting OK or Cancel at least closes the
dialog now.
2000-07-08 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_create_entry): Set the returned entry to
use the ellipsis.
2000-07-08 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook-factory.c: Include
e-select-names-factory.h.
* gui/component/select-names/e-select-names-model.c: Handle a NULL
iterator properly in the replace function.
* gui/component/select-names/e-select-names-table-model.c: Fill in
info properly in the value_at function.
* gui/component/select-names/e-select-names-text-model.c: Don't
strlen a NULL text object.
* gui/component/select-names/e-select-names.c: Close if the person
hits ok or cancel (doesn't yet actually undo changes if Cancel is
hit.) Handle removing addresses when they're double clicked on.
* gui/component/select-names/select-names.glade,
gui/component/select-names/select-names.glade.h: Hid some unused
fields and changed the text at the top of the dialog.
2000-07-08 Jeffrey Stedfast <fejj@helixcode.com>
* gui/component/select-names/.cvsignore: Ignore dynamically
created source files
2000-07-08 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/select-names/e-select-names-bonobo.c
(entry_get_property_fn): New function to set the properties.
2000-07-08 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook-factory.c (main): Start up the factory
for `Evolution::Addressbook::SelectNames'.
* gui/component/select-names/evolution-addressbook-select-names.oafinfo:
New.
* gui/component/select-names/e-select-names-factory.c: New.
* gui/component/select-names/e-select-names-factory.h: New.
* gui/component/select-names/e-select-names-bonobo.c: New.
* gui/component/select-names/e-select-names-bonobo.h: New.
* gui/component/addressbook-factory.c (main): Call
`e_select_names_factory_init()'.
* gui/component/select-names/e-select-names-manager.c
(e_select_names_manager_add_section): Made const-aware.
(e_select_names_manager_create_entry): Made const-aware.
(e_select_names_manager_activate_dialog): Made const-aware.
* gui/component/select-names/Evolution-Addressbook-SelectNames.idl:
New.
2000-07-08 Christopher James Lahey <clahey@helixcode.com>
* gui/component/e-addressbook-model.c,
gui/component/e-addressbook-model.h: Added an "editable" argument.
* gui/component/select-names/e-select-names.c: Set our
EAddressModel to not be editable.
2000-07-07 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names/e-select-names.c: Changed to line
mode.
2000-07-07 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names/e-select-names-manager.c,
gui/component/select-names/e-select-names-model.c: Implemented the
get_cards function.
* gui/component/select-names/e-select-names.c: Implemented adding
cards through the interface.
2000-07-07 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names/e-select-names-manager.c: Make the
entry widgets we create editable.
* gui/component/select-names/e-select-names-model.c: Use
e_strsplit instead of g_strsplit. Fixed an off by 1 error.
* gui/component/select-names/e-select-names-table-model.c: When
the model changes, send a model changed signal.
* gui/component/select-names/e-select-names-text-model.c: Made
changing this work correctly if it's empty. Made change signals
propagate properly. Is a bit better about freeing iterators when
done.
* gui/component/select-names/e-select-names.c: Made the finished
lists be in order instead of being sorted.
2000-07-07 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c (new_server_cb): Since
ELDAPServer->port is a char *, allocate a string with the number
389 contained.
* gui/component/addressbook.c: Make the select names test test the
new code instead of the old way of getting to an ESelectNames
dialog.
* gui/component/select-names/e-select-names-manager.c: Coded
storing the model for each section, creating an entry and
returning it, and for activating the dialog. Wrote a bit of the
get_cards code, but not all of it.
* gui/component/select-names/e-select-names-model.c,
gui/component/select-names/e-select-names-model.h: Coded all of
the code needed to make ESelectNamesTextModel work (it doesn't
yet, but all the code should be there.) Removed
E_SELECT_NAMES_MODEL_DATA_TYPE_SEPARATION_MATERIAL.
* gui/component/select-names/e-select-names-table-model.c,
gui/component/select-names/e-select-names-text-model.c: Changed
these to compensate for removal of
E_SELECT_NAMES_MODEL_DATA_TYPE_SEPARATION_MATERIAL.
* gui/component/select-names/e-select-names-table-model.h,
gui/component/select-names/e-select-names-text-model.h: Fixed some
silly typos.
* gui/component/select-names/e-select-names.c,
gui/component/select-names/e-select-names.h: Added a parameter to
add_section that lets you specify the source ESelectNamesModel.
2000-07-06 Chris Toshok <toshok@helixcode.com>
* gui/component/e-ldap-storage.h: add scope to ELDAPServer, and
make port a string.
* gui/component/e-ldap-storage.c (load_ldap_data): don't load a
uri, load all the bits and pieces and build up the uri when
creating the folder, according to the openldap url format.
(ldap_server_foreach): store out each of the individual uri
pieces.
(e_ldap_storage_remove_server): free the new fields.
(get_string_value): if the text is empty, return the empty string
instead of NULL.
* gui/component/e-ldap-server-dialog.c (extract_server_info): port is a string now.
(fill_in_server_info): port is a string now.
2000-07-06 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Changed "FIXME: Save and
Close" to "Save and Close". Removed some toolbar items that will
never be used.
* gui/component/select-names/e-select-names-model.c,
gui/component/select-names/e-select-names-model.h: Added functions
to allow you to modify the model (not implemented yet.)
* gui/component/select-names/e-select-names-table-model.c,
gui/component/select-names/e-select-names-table-model.h: Finished
this. Doesn't support changing the model at all.
* gui/component/select-names/e-select-names-text-model.c: Finished
this. Changing the model by typing is done, but doesn't work
since none of the functions in the base model are implemented.
2000-07-05 Chris Toshok <toshok@helixcode.com>
* gui/component/addressbook.c (new_server_cb): call
e_ldap_storage_add_server call.
* gui/component/ldap-server-dialog.glade: add name row.
* gui/component/e-ldap-server-dialog.h: remove the ELDAPServer type.
* gui/component/e-ldap-server-dialog.c (extract_server_info): add
support for the name-entry.
* gui/component/e-ldap-server-dialog.c (fill_in_server_info): same.
* gui/component/e-ldap-storage.h: add ELDAPServer type, and add
prototypes for e_ldap_storage_add_server and
e_ldap_storage_remove_server.
* gui/component/e-ldap-storage.c (e_ldap_storage_add_server): new
function, add it to our hash table, add a shell folder, and save
out the metadata.
(ldap_server_foreach): add the ldap server info under a
"contactserver" node.
(setup_ldap_storage): create our hashtable.
2000-07-05 Chris Toshok <toshok@helixcode.com>
* gui/component/addressbook.c (set_prop): remove hack to read
"uri" file from local directory.
* gui/component/Makefile.am (evolution_addressbook_SOURCES): add
e-ldap-storage.{c,h}
* gui/component/addressbook-component.c (owner_set_cb): call
setup_ldap_storage.
* gui/component/e-ldap-storage.c (setup_ldap_storage): Register
the LDAP storage and load the .xml file.
(load_ldap_data): function to load our xml file.
(save_ldap_data): function to save our xml file.
* gui/component/e-ldap-storage.h: new file.
2000-07-03 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names/e-select-names-manager.c,
gui/component/select-names/e-select-names-text-model.c,
gui/component/select-names/e-select-names.c: Fixed more compile
errors.
2000-07-03 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names/Makefile.am: Fixed compile error.
2000-07-03 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/Makefile.am: Removed e-card-iterator.c,
e-card-iterator.h, e-card-list-iterator.c, e-card-list-iterator.h,
e-card-list.c, e-card-list.h.
* backend/ebook/e-card-iterator.c,
backend/ebook/e-card-iterator.h,
backend/ebook/e-card-list-iterator.c,
backend/ebook/e-card-list-iterator.h, backend/ebook/e-card-list.c,
backend/ebook/e-card-list.h: Removed in favor or versions without
the -card in the e-util directory since these classes are not
specific to cards at all.
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h,
backend/ebook/e-card.c, backend/ebook/e-card.h,
backend/ebook/load-pine-addressbook.c, backend/ebook/test-card.c,
backend/pas/pas-backend-file.c: Changed the references to
e-card-list.c and friends to e-list.c and friends.
* contact-editor/e-contact-editor.c: Added #include
<e-contact-save-as.h> to fix a warning.
* gui/component/Makefile.am: Moved a number of classes associated
with the select-names object to the new select-names directory.
* gui/component/addressbook.c: Changed the reference to
e-select-names.h.
* gui/component/e-select-names.c, gui/component/e-select-names.h,
gui/component/select-names.glade,
gui/component/select-names.glade.h: Moved these files into
select-names/.
* gui/component/select-names/.cvsignore,
gui/component/select-names/Makefile.am,
gui/component/select-names/e-select-names-manager.c,
gui/component/select-names/e-select-names-manager.h,
gui/component/select-names/e-select-names-model.c,
gui/component/select-names/e-select-names-model.h,
gui/component/select-names/e-select-names-table-model.c,
gui/component/select-names/e-select-names-table-model.h,
gui/component/select-names/e-select-names-text-model.c,
gui/component/select-names/e-select-names-text-model.h,
gui/component/select-names/e-select-names.c,
gui/component/select-names/e-select-names.h,
gui/component/select-names/recipient.glade,
gui/component/select-names/select-names.glade,
gui/component/select-names/select-names.glade.h: New files for
select names dialog (e-select-names.c, e-select-names.h,
select-names.glade, select-names.glade.h and recipient.glade moved
from gui/component/.)
2000-06-29 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook-component.c (owner_set_cb): Get an
EvolutionShellClient instead of an Evolution_Shell to match the
changes in libeshell.
2000-06-28 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names/,
gui/component/select-names/e-select-names-manager.c,
gui/component/select-names/e-select-names-manager.h: New select
names manager interface (Not complete.)
2000-06-26 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c,
addressbook/gui/component/e-cardlist-model.c: Added
value_to_string handlers.
* demo/addressbook-widget.c, demo/demo.c: Removed usage of "x" and
"y" arguments.
* addressbook/gui/component/addressbook.c: Activated Click To Add
and set the click to add message.
* addressbook/gui/component/e-addressbook-model.c: Added
value_to_string and append_row handlers.
* addressbook/gui/component/e-select-names.c: Added a column.
2000-06-26 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c (poll_ldap): remove spew.
(pas_backend_ldap_ensure_connected): duh, don't access a pointer
we know to be NULL.
(query_prop_to_ldap): rename map_e_card_prop_to_ldap to this.
easier to type.
2000-06-21 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/test-minicard-label.c,
gui/minicard/test-minicard.c, gui/minicard/test-reflow.c: Remove
usage of "x" and "y" arguments.
2000-06-18 <ettore@helixcode.com>
* contact-editor/Makefile.am (INCLUDES): Use
`$(BONOBO_GNOME_CFLAGS)' so that we compile when Bonobo is not in
the default GNOME prefix.
2000-06-17 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard-label.c,
gui/minicard/e-minicard-label.h, gui/minicard/e-minicard.c: Made
the left column of minicards not get any wider than the widest
possible name.
2000-06-13 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/Makefile.am (SHELL_OBJS): Removed.
(evolution_addressbook_LDADD): Link with
`$(top_builddir)/shell/libeshell.a'.
2000-06-12 Federico Mena Quintero <federico@helixcode.com>
* contact-editor/e-contact-editor-categories.c: Removed the
ETableModel thaw handler.
* gui/component/e-cardlist-model.c: Likewise.
2000-06-11 Christopher James Lahey <clahey@helixcode.com>
* gui/component/e-select-names.c: Fixed the widget reparenting.
2000-06-11 Christopher James Lahey <clahey@helixcode.com>
* gui/component/Makefile.am: Added glade files.
* gui/component/addressbook.c: Added a test of the Select Names
functionality.
* gui/component/e-addressbook-model.c: Made this class_init
function a bit cleaner.
* gui/component/e-select-names.c: Tested this and fixed some
obvious errors.
* gui/component/select-names.glade: The main window shouldn't be
visible by default.
2000-06-11 Ettore Perazzoli <ettore@helixcode.com>
* contact-editor/Makefile.am (contact_editor_test_LDADD): Link
with libemiscwidgets.a.
* gui/component/Makefile.am (evolution_addressbook_LDADD): Likewise.
* gui/minicard/Makefile.am (minicard_test_LDADD): Likewise.
(reflow_test_LDADD): Likewise.
(minicard_view_test_LDADD): Likewise.
2000-06-10 Christopher James Lahey <clahey@helixcode.com>
* gui/component/e-cardlist-model.c: Renamed a bunch of functions
for better readability.
* gui/component/e-select-names.c, gui/component/e-select-names.h:
This should be a working dialog now.
* gui/component/select-names.glade: Changed the name & creation
function of the ETable here.
2000-06-10 Christopher James Lahey <clahey@helixcode.com>
* gui/component/select-names.glade,
gui/component/select-names.glade.h: Glade files for Select Names
dialog.
2000-06-10 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Do e_card_simple_sync and
extract_info more often.
* gui/component/addressbook.c: Added table printing code.
2000-06-09 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook-component.c (factory_fn): Pass NULL
for the new args @create_folder_fn and @remove_folder_fn.
2000-06-08 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook-component.c (create_view): Updated for
the new `EvolutionShellComponentCreateViewFn'. Return
`EVOLUTION_SHELL_COMPONENT_UNSUPPORTEDTYPE' if @type is not
"contacts".
2000-06-08 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Bind Save As to save the
current view of the contact as a vcard.
2000-06-08 Federico Mena Quintero <federico@helixcode.com>
* contact-editor/e-contact-editor.c (save_card): Doh, sync the
card simple and extract the card info.
2000-06-08 Federico Mena Quintero <federico@helixcode.com>
* contact-editor/e-contact-editor.h (EContactEditor): Now this
derives from GtkObject. It follows the same strategy as the
EventEditor in the calendar.
(EContactEditor): Added an is_new_card field so that we can know
whether to add() or commit() the card.
* contact-editor/e-contact-editor.c (e_contact_editor_get_type):
Derive from GtkObject.
(e_contact_editor_class_init): Likewise.
(e_contact_editor_class_init): Added an "is_new_card" argument.
(e_contact_editor_set_arg): Handle ARG_IS_NEW_CARD.
(e_contact_editor_get_arg): Likewise.
(e_contact_editor_new): Take in an is_new_arg argument and set it
on the object.
(e_contact_editor_init): Load the app widget into the app field of
the EContactEditor structure. Create its UIHandler as well.
(e_contact_editor_class_init): New "add_card", "commit_card", and
"editor_closed" signals.
* contact-editor/test-editor.c (main): Modified for the new API.
(editor_closed_cb): Tweaked for the new API.
Since this test program does not use Bonobo, it doesn't work,
though.
* gui/component/addressbook.c (new_contact_cb): Use the new
contact editor API.
(table_double_click): Ditto.
* gui/minicard/e-minicard-view.c (e_minicard_view_event): Use the
new contact editor API.
* gui/minicard/e-minicard.c (e_minicard_event): Use the new
contact editor API.
2000-06-08 Ettore Perazzoli <ettore@helixcode.com>
* contact-editor/Makefile.am (contact_editor_test_LDADD): Remove
the `$(srcdir)/' prefix from `libecontacteditor.a' because [of
course] the library is built in the build directory, not in the
source directory.
* gui/minicard/Makefile.am (minicard_test_LDADD): Likewise with
`libeminicard.a'.
(minicard_label_test_LDADD): Likewise.
(reflow_test_LDADD): Likewise.
(minicard_view_test_LDADD): Likewise.
2000-06-06 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Bind right click on the ETable to
"Save to VCard."
2000-06-02 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Made phone/email/address
labels change correctly again.
2000-06-02 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook-component.c: Made
evolution-addressbook shut down when the shell is done with it.
2000-06-02 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard-view.c, gui/minicard/e-minicard.c: Made
double click only work on the first button.
2000-06-01 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard.c: return TRUE if opening a contact
editor so that we don't get a "new dialog" contact editor.
2000-06-01 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook.c (new_contact_cb): Use the stock
cancel button for the dialog.
(table_double_click): Likewise.
(find_contact_cb): Likewise.
2000-05-31 Miguel de Icaza <miguel@helixcode.com>
* contact-editor/contact-editor.glade: Added accelerators for
the remaining items.
Add spacing, beautify the dialogs.
2000-06-01 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook.c (control_activate): Put the toolbar
into a frame to make it look like standard GNOME toolbars. Also,
set `GNOME_DOCK_ITEM_BEH_NEVER_VERTICAL' so that it does not do
evil things when its moved to the left or the right of the window.
2000-05-30 Christopher James Lahey <clahey@helixcode.com>
* gui/component/e-cardlist-model.c,
gui/component/e-cardlist-model.h: New files for card list.
2000-05-30 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Fixed a memory leak.
2000-05-30 Christopher James Lahey <clahey@helixcode.com>
* gui/component/alphabet.glade: Made the alphabet buttons not
focusable.
* gui/minicard/e-minicard-view.c: Made the "123" button work.
* gui/minicard/e-reflow-sorted.c: Made all buttons past the last
letter available work.
2000-05-30 Christopher James Lahey <clahey@helixcode.com>
* gui/component/alphabet.glade: Added a bit of space around the
alphabet bar.
2000-05-30 Christopher James Lahey <clahey@helixcode.com>
* gui/component/Makefile.am: Added alphabet.glade and
alphabet.glade.h.
* gui/component/addressbook.c, gui/component/alphabet.glade,
gui/component/alphabet.glade.h: Added an alphabet bar.
* gui/minicard/e-minicard-view.c, gui/minicard/e-minicard-view.h,
gui/minicard/e-reflow-sorted.c, gui/minicard/e-reflow-sorted.h:
Added the ability to just to a particular spot in the reflow.
2000-05-30 Christopher James Lahey <clahey@helixcode.com>
* printing/Makefile.am: Added BONOBO_GNOME_CFLAGS to CPPFLAGS.
2000-05-30 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard-view.c: Made double clicking create a
new card. Set the empty message.
* gui/minicard/e-minicard.c: Made sorting be case insensitive.
* gui/minicard/e-reflow-sorted.c, e-reflow.c, e-reflow.h: Added a
message for when the reflow is empty.
* printing/e-contact-print.c, printing/medbook.ecps: Made the
default printout be full page. Made sorting case insensitive.
2000-05-30 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-book-view-listener.c,
backend/ebook/e-book-view-listener.h, backend/ebook/e-book-view.c,
backend/ebook/e-book-view.h, backend/idl/addressbook.idl,
backend/pas/pas-backend-file.c, backend/pas/pas-backend-ldap.c,
backend/pas/pas-book-factory.c, backend/pas/pas-book-view.c,
backend/pas/pas-book-view.h: Added "sequence_complete" signal.
* printing/e-contact-print.c: Made printing wait for
"sequence_complete" signal and made it sort.
2000-05-25 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c,
gui/component/e-addressbook-model.c,
gui/component/e-addressbook-model.h: Added double click to open
contact editor.
2000-05-25 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Removed some columns.
2000-05-25 Ettore Perazzoli <ettore@helixcode.com>
* gui/component/addressbook.c (addressbook_factory_new_control):
New function.
(addressbook_factory): Use it.
* Makefile.am (evolution_addressbook_LDADD): Link with
`evolution-shell-component.o' from the shell directory.
* gui/component/addressbook-component.c: New.
* gui/component/addressbook-component.h: New.
2000-05-23 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Switched printing and gui.
* backend/ebook/e-book-view-listener.h,
backend/ebook/e-book-view.h, backend/ebook/e-book.h,
backend/ebook/e-card-cursor.h, backend/ebook/e-card-list.h,
backend/ebook/e-card-simple.h, backend/ebook/e-card.h: Fixed the
#defines to work elsewhere in evolution.
* gui/component/Makefile.am: Added linking to libecontactprint.
* gui/component/addressbook.c: Added a menu item to print the
current query.
* printing/Makefile.am: Add linking to libebook and requirements.
Add installation of ecps files.
* printing/e-contact-print.c, printing/e-contact-print.h: Changed
this to use real data from an EBook.
* printing/test-print.c: Made this pass NULL, NULL to
e_contact_print_dialog_new so that it will compile.
2000-05-23 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-save-as.c: Fixed some memory leaks.
2000-05-23 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/Makefile.am: Added e-contact-editor-save-as.c and
e-contact-editor-save-as.h.
* contact-editor/e-contact-save-as.c,
contact-editor/e-contact-save-as.h: New files that display a save
as dialog and then save the given card to that file.
* gui/minicard/e-minicard.c: Call e_contact_save_as in a right
click menu.
2000-05-19 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c,
gui/component/e-addressbook-model.c: Added initialize_value and
value_is_empty callbacks.
2000-05-19 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Fixed a bug that broke
address field support.
2000-05-19 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c,
contact-editor/e-contact-editor.h: Added support for arbitrary
fields in the contact editor.
2000-05-18 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c: Fixed e_card_name_copy and
e_card_arbitrary_copy to deal correctly with a passed NULL.
* contact-editor/Makefile.am: Removed imagesdir stuff.
* contact-editor/arrow.png: Made this transparent.
* contact-editor/contact-editor.glade,
contact-editor/e-contact-editor-strings.h: Renamed some widgets
and added custom widgets for all of the images.
* contact-editor/e-contact-editor.c: Worked on making this work
decently well with messed up glade files. Cleaned up a lot of code.
2000-05-18 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c: Fixed the code to write out and read in
arbitrary fields.
2000-05-18 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h,
backend/ebook/e-card-types.h, backend/ebook/e-card.c,
backend/ebook/e-card.h: Implemented "MAILER" field. Added
arbitrary field support.
* contact-editor/e-contact-editor-categories.c: Fixed a warning.
2000-05-16 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
Added E_CARD_SIMPLE_FIELD_MAILER. Not implemented yet.
2000-05-16 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c (construct_email_list): convert to use ECardSimple.
(poll_ldap): same.
2000-05-16 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-book.h: add typedefs for the can_write
functions, and add parameters to pas_book_new.
* backend/pas/pas-book.c (pas_book_construct): add can_write/can_write_card params.
(pas_book_new): same.
(impl_Evolution_Book_can_write): new function.
(impl_Evolution_Book_can_write_card): same.
(pas_book_get_epv): assign the can_write/can_write_card slots in the epv.
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_can_write): new function.
(pas_backend_ldap_can_write_card): same.
(pas_backend_ldap_add_client): add can_write/can_write_card to pas_book_new call.
* backend/pas/pas-backend-file.c (pas_backend_file_can_write_card): new function, calls can_write.
(pas_backend_file_can_write): same.
(can_write): return TRUE if we can write to the addressbook file.
(pas_backend_file_add_client): add can_write/can_write_card to pas_book_new call.
* backend/idl/addressbook.idl (Evolution): add can_write and
can_write_card permission requests.
2000-05-16 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c (e_card_get_vcard): Fixed a large memory leak.
2000-05-16 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c (add_list_unique): Fixed another memory
leak.
2000-05-16 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c, backend/pas/pas-backend-file.c,
contact-editor/e-contact-editor.c, ename/e-name-western.c,
gui/component/addressbook.c, gui/minicard/e-minicard-view.c: Fixed
some memory leaks.
* backend/ebook/e-card.c: Rearranged some code.
2000-05-16 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c: Fixed a reference
leak.
2000-05-16 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c: Fixed a compile
error.
2000-05-16 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c: Got rid of a
memory leak. Rearranged a couple functions.
* gui/minicard/e-minicard-view.c, gui/minicard/e-minicard-view.h:
Added some code to stop watching the EBook when the canvas is
destroyed (apparently the canvas is destroyed before our widget is
destroyed.)
2000-05-14 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-categories.c: Use the correct
policy for resize.
2000-05-14 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/Makefile.am: Added libeutil for e-card's support
for categories.
* backend/ebook/e-card-list.c, backend/ebook/e-card-list.h: Added
a function to get the length.
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added categories
support (accessible either as "categories" or "category_list".)
* contact-editor/Makefile.am: Added e-table and all of the
categories files.
* contact-editor/categories.glade,
contact-editor/categories-strings.h,
contact-editor/e-contact-editor-categories.c,
contact-editor/e-contact-editor-categories.h:
* contact-editor/contact-editor.glade,
contact-editor/e-contact-editor-strings.h: Rearranged this dialog.
* contact-editor/e-contact-editor.c: Rearranged dialog a bit.
Added opening of categories dialog.
* gui/component/Makefile.am: Rearranged libraries so that
libetable would be available for the contact editor categories
dialog.
* gui/component/addressbook.c: Fix for new ETable resizing. Make
contact editor dialog resizable.
* gui/minicard/Makefile.am: Added libetable contact editor
categories dialog.
* gui/minicard/e-minicard.c: Make contact editor dialog resizable.
2000-05-12 Miguel de Icaza <miguel@gnu.org>
* contact-editor/fulname.glade: Use accelerators here.
2000-05-13 Valek Filippov <frob@df.ru>
* gui/component/ldap-server-dialog.glade: save translatable strings
* gui/component/ldap-server-dialog.glade.h: file with strings
* printing/e-contact-print.glade: save translatable strings
* printing/e-contact-print.glade.h: file with strings
2000-05-11 Dan Winship <danw@helixcode.com>
* gui/component/addressbook.c (control_activate): Now that we
depend on recent gnome-libs we can make the toolbar detachable
again.
2000-05-10 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Make the table view be sorted by
name initially.
2000-05-10 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-book-factory.c: Send a proper response when you
can't find the ldap URI.
* gui/component/addressbook.c: Cleaned up the open error dialog a
bit.
2000-05-10 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Added a dialog for when you can't
open an addressbook.
2000-05-10 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/Makefile.am: Added e-book-types.h, e-card-pairs.h,
e-card-types.h.
* backend/pas/Makefile.am: Added pas-backend-ldap.h.
* contact-editor/Makefile.am: Added a proper EXTRA_DIST section.
Removed some old defines.
* ename/Makefile.am: Added e-name-western-tables.h.
* gui/component/Makefile.am: Added e-ldap-server-dialog.h. Added
a proper EXTRA_DIST section.
* gui/minicard/e-reflow.c: Added a missed cast.
* printing/Makefile.am: Added a proper EXTRA_DIST section.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Make sure that the canvas
doesn't intercept keyboard focus.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Use new art.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/contact-editor.glade,
contact-editor/e-contact-editor-strings.h: Replaced the Address
button with a label and rearranged the address area a bit.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard.c: Reenable editting.
* gui/minicard/e-reflow-sorted.c: Make reflow flow on deletion.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Destroy the view object when
leaving the minicard view.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-reflow-sorted.c: Fixed reflow sorting to call
reflow_request when sorting on an item changes.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c: Make File As change if name or
company are changed pretty much anywhere.
* gui/minicard/e-minicard.c: Turned off having minicard editing
effect anything since it's so crashy.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-ldap.c: Enabled a couple more fields
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-file.c: Added a default card to all new
file backends.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* gui/component/e-addressbook-model.c: Rearranged order of things
getting destroyed.
* gui/minicard/e-minicard-view.c: Rearranged order of things
getting destroyed. Don't set attributes of non-null or destroyed
items. Destroy parent object when destroyed. Maintain ref_count
of items in list.
* gui/minicard/e-minicard.c: Don't set attributes of non-null
items.
* gui/minicard/e-reflow-sorted.c: Maintain ref_count of items in
list.
* gui/minicard/e-reflow.c: Maintain ref_count of items in list.
Destroy parent object when destroyed.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c: Fixed some indentation.
* contact-editor/contact-editor.glade,
contact-editor/e-contact-editor-strings.h: Changed Email to
Primary Email.
* contact-editor/e-contact-editor.c: Added checkmarks to indicate
if data exists in the pull down menus for the phone, address, and
email fields.
2000-05-09 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c: Fixed the string duplication
problem. Fixed the business/home address string mix up.
* gui/component/addressbook.c: Made the minicard view the default
view.
2000-05-08 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c: Fixed this up a bit. Syncing
should work better now.
2000-05-08 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard-view.c, gui/minicard/e-minicard.c,
gui/minicard/e-minicard.h, gui/minicard/e-reflow-sorted.c,
gui/minicard/e-reflow-sorted.h: Made a minimal number of things be
destroyed and recreated when updating a field.
2000-05-07 <toshok@the-dot-in.helixcode.com>
* gui/minicard/e-minicard.c (remodel): make sure to free the
return value of e_card_simple_get.
* gui/component/addressbook.c (teardown_table_view): destroy the
ECardSimple here, plug memory leak.
(create_table_view): use view->simple so we can destroy the
ECardSimple later on.
2000-05-07 Chris Toshok <toshok@helixcode.com>
* ename/e-name-western.c (e_name_western_extract_middle): comment
function, and fix an ABR.
2000-05-07 Chris Toshok <toshok@helixcode.com>
* ename/e-name-western.c (e_name_western_cleanup_string): comment
function, and fix an ABR.
2000-05-08 Christopher James Lahey <clahey@helixcode.com>
* gui/minicard/e-minicard.c: Added saving in minicard view.
2000-05-07 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-file.c: Fixed an off by 2 error.
2000-05-07 Chris Toshok <toshok@helixcode.com>
* gui/component/addressbook.c (set_prop): don't create a new
ebook. instead, unload the current uri (if there is one) and load
the new one.
(addressbook_factory): create the ebook once.
2000-05-07 Christopher James Lahey <clahey@helixcode.com>
* gui/component/e-addressbook-model.c: Replaced some model_changed
calls with row_inserted calls.
2000-05-07 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-file.c, backend/pas/pas-backend-ldap.c:
Removed some code that was notifying too many clients at the wrong
times.
* gui/component/addressbook.c: Set view->book. Unreffed
view->book. Unreffed the model instead of destroying it. Removed
the /tmp/test.db stuff.
2000-05-07 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Make the addressbook create the
correct file uri. Added a default query. Initialize view->model
and view->view to NULL.
* gui/component/e-addressbook-model.c,
gui/minicard/e-minicard-view.c: Only call get_book_view if both
book and query and non-null.
2000-05-06 Chris Toshok <toshok@helixcode.com>
* gui/component/addressbook.c (control_deactivate): remove the
separator and toggle view items as well.
(toggle_view_as_cb): callback for the "/View/Toggle View" menu
item.
(get_query): getter for the query string that takes into account
the two view types.
(set_query): setter for the query string that takes into account
the two view types.
(set_book): setter for the EBook type - not really a setter, since
the book is kept in the AddressbookView, but this method actually
sets the "book" property on the current view.
(find_contact_cb): make use of get/set_query
(search_entry_activated): make use of set_query.
(control_activate): add a menu separator and an item to toggle
between view types.
(book_open_cb): make use of set_book.
(ebook_create): no longer needs to return the EBook, since we set
the book field in our view.
(teardown_minicard_view): destructor function for the minicard
specific ui.
(create_minicard_view): constructor function for the minicard
specific ui.
(teardown_table_view): destructor function for the e-table
specific ui.
(create_table_view): constructor function for the e-table specific
ui.
(change_view_type): destroy the old and create the new view ui,
change the label of the Toggle View menu item, and reset the book
and query on the new view type.
(addressbook_factory): create an all-encompassing vbox that the
view uses to create the bonobo control, which contains 1 widget
per ui specific view (the e-table in the table case, and another
vbox in the minicard case.) use change_view_type to create the
initial view.
2000-05-07 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-book.c: Made a NULL callback just mean to not
call back.
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
Reordered fields. Added a get_const function to get a constant
string that persists until the simple is destroyed.
* gui/component/Makefile.am: Added e-addressbook-model.c and
e-addressbook-model.h and all of the libraries and includes that
they are dependent on.
* gui/component/addressbook-factory.c: Initialize e cursors.
* gui/component/addressbook.c: Added inactive code to display an
ETable view of the addressbook.
* gui/component/e-addressbook-model.c,
gui/component/e-addressbook-model.h: New files to implement an
ETable model with a EBook back end.
2000-05-06 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
Mostly finished ECardSimple.
* contact-editor/e-contact-editor.c: Changed this to match with
some of the changes to ECardSimple.
* gui/component/addressbook.c: Changed this to look for
"addressbook.db" in the given directory if it doesn't find the
file "uri".
* gui/minicard/e-minicard.c, gui/minicard/e-minicard.h: Changed
this to use ECardSimple.
2000-05-06 Chris Toshok <toshok@helixcode.com>
* gui/component/.cvsignore: ignore evolution-addressbook.pure
* gui/component/Makefile.am: add support for generating
evolution-addressbook.pure.
2000-05-06 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_load_uri): if a
port isn't specified in the uri default to 389.
2000-05-06 Christopher James Lahey <clahey@helixcode.com>
* gui/component/addressbook.c: Made this take a uri through its
property bag.
2000-05-05 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/Makefile.am: Added e-card-simple.c and
e-card-simple.h.
* backend/ebook/e-card-simple.c, backend/ebook/e-card-simple.h:
New card wrapper class to simplify things.
* contact-editor/e-contact-editor.c,
contact-editor/e-contact-editor.h: Changed e-contact-editor to use
ECardSimple a bit.
2000-05-03 Chris Toshok <toshok@helixcode.com>
* gui/component/addressbook.c (control_deactivate): #ifdef
HAVE_LDAP the ldap specific stuff.
(null_cb): same.
(control_activate): same.
2000-05-02 Ettore Perazzoli <ettore@helixcode.com>
* backend/ebook/Makefile.am (INCLUDES): Add
`-I$(top_srcdir)/addressbook/ename'.
2000-05-02 Matt Loper <matt@helixcode.com>
* demo/Makefile.am: set G_LOG_DOMAIN.
* printing/Makefile.am: same.
2000-05-01 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-book-factory.c: Add back in the
CORBA_Object_release.
* backend/pas/pas-book.c: Properly duplicate and release the
listener passed to us.
2000-05-01 Christopher James Lahey <clahey@helixcode.com>
* backend/pas/pas-backend-file.c, backend/pas/pas-backend-ldap.c:
Made uri slightly better managed.
* backend/pas/pas-book-factory.c
(pas_book_factory_process_request): Remove this
CORBA_Object_release that causes things not to work. This is just
a temporary fix until we figure out what's actually wrong.
* backend/pas/pas-book.c: Fixed a copy and paste error in a warning.
2000-05-01 Christopher James Lahey <clahey@helixcode.com>
* Makefile.am: Switched the subdirs order since backend depends on
ename.
2000-05-01 Larry Ewing <lewing@helixcode.com>
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_remove_client):
fix a typo in the for loop.
2000-05-01 Michael Meeks <michael@helixcode.com>
* backend/pas/pas-book-factory.c: include gtk.
2000-04-30 Federico Mena Quintero <federico@helixcode.com>
* backend/ebook/e-book-types.h (EBookStatus): Added new status
values for the IDL stuff.
* backend/pas/pas-book-factory.h (PASBookFactoryClass): New
"last_book_gone" signal.
* backend/pas/pas-book-factory.c
(pas_book_factory_launch_backend): Better error handling.
(pas_book_factory_process_queue): Let
pas_book_factory_process_request() free the request.
(pas_book_factory_process_request): Free the request here.
Perform better error handling.
(free_active_server_map_entry): Free an active server map entry;
free the URI key and unref the backend value. This function was
renamed; the old one was trying to CORBA_Object_unref() a GTK+
object!
(remove_backends_entry): Free a backend table entry; free the URI
key.
(backend_last_client_gone_cb): Remove the backend from the active
server map and emit the "last_book_gone" signal if appropriate.
(pas_book_factory_get_n_backends): New function to query the
number of running backends in an addressbook factory.
* backend/idl/addressbook.idl (BookListener::CallStatus): Added a
ProtocolNotSupported code. This is for when the addressbook
factory cannot find a provider for the requested URI.
* backend/pas/pas-backend.h (PASBackendClass): New
"last_client_gone" signal.
(PASBackendClass): New get_uri virtual method.
* backend/pas/pas-backend.c (pas_backend_load_uri): Return a
gboolean success code.
(pas_backend_add_client): Return a gboolean success code.
(pas_backend_last_client_gone): New function used by backend
implementations to notify upwards when the backend's last client
is destroyed.
(pas_backend_get_uri): New function to get the URI of a backend.
* backend/pas/pas-backend-file.c (pas_backend_file_add_client):
Pass the backend as the closure data to the "destroy" handler of
the book. We cannot call pas_book_get_backend() in the callback
since the book's private data has already been destroyed when the
callback is invoked. Alternatively, we could move the private
data destruction step to the book's ::finalize() method.
(pas_backend_file_book_destroy_cb): Get the backend from the
callback's data, not from the book.
(pas_backend_file_remove_client): Remove the book from the list of
clients. When all clients go away, call
pas_backend_last_client_gone().
(PASBackendFilePrivate): Added an uri field.
(pas_backend_file_get_uri): Implement the get_uri method.
(pas_backend_file_load_uri): Return a gboolean success code.
Also, store the URI in the private structure.
(pas_backend_file_add_client): Return a gboolean success code.
Also, call pas_backend_last_client_gone() if appropriate.
(pas_backend_file_destroy): Free the bf->priv->uri.
* backend/pas/pas-backend-ldap.c (pas_backend_ldap_add_client):
Pass the backend as the closure data to the "destroy" handler of
the book. See above for rationale.
(pas_backend_ldap_book_destroy_cb): Get the backend from the
callback's data.
(pas_backend_ldap_remove_client): Remove the book from the list of
clients. When all clients go away, call
pas_backend_last_client_gone().
(pas_backend_ldap_load_uri): Return a gboolean success code.
(pas_backend_ldap_add_client): Return a gboolean success code.
Also, call pas_backend_last_client_gone() if appropriate.
(PASBackendLDAPPrivate): New uri field.
(pas_backend_ldap_get_uri): Implement the get_uri method.
(pas_backend_ldap_load_uri): Store the uri in the private
structure.
(pas_backend_ldap_destroy): Free the bl->priv->uri.
2000-04-30 Chris Toshok <toshok@helixcode.com>
* gui/component/Makefile.am (evolution_addressbook_SOURCES): added
e-ldap-server-dialog.c
(glade_DATA): added ldap-server-dialog.glade
* gui/component/ldap-server-dialog.glade: new file.
* gui/component/e-ldap-server-dialog.h: new file.
* gui/component/e-ldap-server-dialog.c: new file, contains logic
associated with ldap server dialog.
* gui/component/addressbook.c (control_deactivate): remove the
directory server menu item.
(null_cb): do nothing callback for e_book_load_uri call. should
change to (at the very least) pop up a dialog if there was an
error.
(new_server_cb): new function - really just switches to a
particular ldap server, since the information isn't saved
anywhere.
(control_activate): add directory server menu item.
2000-04-30 Chris Toshok <toshok@helixcode.com>
* backend/ebook/e-book.c (e_book_load_uri): create the book
listener here, since it's destroyed in unload_uri.
(e_book_construct): remove the book listener construction here.
2000-04-30 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/.cvsignore: Added load-pine-addressbook.
2000-04-30 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/contact-editor.glade,
contact-editor/e-contact-editor.c, gui/minicard/e-minicard.c: Made
some fields invisible that were visible before.
2000-04-30 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c: Make file as not have the : after it if
it's empty. If there's no name, or file_as, fill in these fields
with defaults based on full_name or name respectively.
* backend/ebook/load-pine-addressbook.c: New file to do import of
pine .addressbook files.
* backend/pas/pas-backend-file.c: Made empty fields act as the
empty string for searches.
* contact-editor/e-contact-editor.c,
contact-editor/e-contact-editor.h: Made the File As field update
properly as you edit the name and company fields. Added the pull
down list of File As choices. Made sure that all fields will
be set to NULL if they are deleted to the empty string.
* gui/minicard/e-minicard.c: Use the File As field instead of the
Full Name field for the header. Make identical compares on the
File As field do a compare on the uid.
2000-04-30 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor-fullname.c,
contact-editor/fullname.glade: Fixed a string mismatch.
2000-04-30 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/Makefile.am: Added ename includes and libs.
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added
e_card_name_from_string. Added header for
e_card_delivery_address_from_string, even though it's not
implemented yet.
* contact-editor/Makefile.am: Removed the ename includes since we
no longer use ename directly here.
* contact-editor/e-contact-editor.c: Fixed this to properly save
the address labels displayed. Updated this to use the function
e_card_name_from_string instead of doing it by hand.
* contact-editor/fullname-strings.h,
contact-editor/fullname.glade: Deleted an unused field. Changed
the set of prefixes and suffixes.
2000-04-30 Chris Toshok <toshok@helixcode.com>
* backend/pas/pas-backend-ldap.c
(pas_backend_ldap_ensure_connected): add support for a rootdn in
the uri.
(pas_backend_ldap_build_all_cards_list): make use of the rootdn in
the call to ldap_search_s.
(pas_backend_ldap_search): same.
(pas_backend_ldap_load_uri): get the rootdn out of the passed in uri.
2000-04-29 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added
e_card_phone_new e_card_delivery_address_new,
e_card_delivery_address_to_string, e_card_name_copy,
e_card_name_new, e_card_name_to_string, and made e_card_name_free
public. Removed some unused code.
* backend/pas/pas-backend-file.c: Fixed a warning.
* contact-editor/Makefile.am: Added e-contact-editor-fullname.[ch]
and fullname.glade. Added e-name libs and includes.
* contact-editor/e-contact-editor-fullname.c,
contact-editor/e-contact-editor-fullname.h,
contact-editor/fullname-strings.h, contact-editor/fullname.glade:
New dialog for editing the fields of a name separately.
* contact-editor/e-contact-editor.c,
contact-editor/e-contact-editor.h: Create an
EContactEditorFullname when you click on the Full Name button.
Maintain a parsed name at all times.
* gui/component/Makefile.am, gui/minicard/Makefile.am: Added
e-name libs.
2000-04-28 Larry Ewing <lewing@helixcode.com>
* backend/pas/pas-book-factory.c (register_factory): fix the
`USING_OAF' changes so that they work for when we are not using
oaf.
2000-04-27 Ettore Perazzoli <ettore@helixcode.com>
* ename/Makefile.am
(gnome_libs): Use `BONOBO_GNOME_LIBS'.
(INCLUDES): Add `-I$(srcdir)/..'.
* backend/pas/pas-book-factory.c
(register_factory): New function to register the factory.
Implementation different according to `USING_OAF'.
(pas_book_factory_activate): Use `register_factory()'.
* gui/component/addressbook.c: New #define `CONTROL_FACTORY_ID',
varying depending on whether we are `USING_OAF'.
(addressbook_factory_init): Use `CONTROL_FACTORY_ID'.
* backend/ebook/test-client.c (init_corba): New function,
implemented differently according to the `USING_OAF' #define.
* backend/ebook/e-book.c: New #define `CARDSERVER_OAF_ID'.
(e_book_construct): Work with OAF #if `USING_OAF'.
* backend/ebook/Makefile.am (gnome_libs): Removed.
(corbadir): Removed.
(ebook_libs): Removed.
(test_client_LDADD): Just add `libebook.la'.
(test_card_LDADD): Likewise.
(test_client_list_LDADD): Likewise.
* gui/component/addressbook-factory.c
(init_corba): New helper function, implemented differently
according to `USING_OAF'.
(main): Call `init_corba()'.
2000-04-27 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card.c, backend/ebook/e-card.h: Added file as,
office, manager, assistant, spouse, and anniversary fields. These
all use "X-EVOLUTION-" fields in the VCards.
* backend/pas/pas-backend-file.c: Added all the new fields (except
anniversary) to the list of fields.
* contact-editor/contact-editor.glade,
contact-editor/e-contact-editor-strings.h: Fixed some misnamed
fields and fixed the placement of the comments field.
* contact-editor/e-contact-editor.c: Made the newly added fields
display properly.
* Makefile.am: Added ename.
* ename/e-name-western.h, ename/test-ename-western-gtk.c,
ename/test-ename-western.c: Fixed up some #includes.
* ename/.cvsignore: Added .cvsignore.
2000-04-26 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-types.h, backend/ebook/e-card.c,
backend/ebook/e-card.h: Added an address label field.
* contact-editor/contact-editor.glade,
contact-editor/e-contact-editor-strings.h: Got rid of some unused
fields.
* contact-editor/e-contact-editor.c,
contact-editor/e-contact-editor.h: Added the address label field.
Load only. Editing these fields seems to mess things up.
2000-04-26 Christopher James Lahey <clahey@helixcode.com>
* contact-editor/e-contact-editor.c: Added proper handling of the
email field.
2000-04-26 Christopher James Lahey <clahey@helixcode.com>
* backend/ebook/e-card-types.h, backend/ebook/e-card.c,
gui/minicard/e-minicard.c: Prefixed the ADDR_ flags.
* contact-editor/contact-editor.glade,
contact-editor/e-contact-editor-strings.h: Edited the glade file.
Removed all the fields that we don't use.
* contact-editor/e-contact-editor.c,
contact-editor/e-contact-editor.h: Made the phone fields work
properly. The address and email fields are temporarily turned off
until they can be made to work as the phone fields do.
2000-04-25 Ettore Perazzoli <ettore@helixcode.com>
* gui/minicard/Makefile.am (INCLUDES): Use
`$(BONOBO_GNOME_CFLAGS)'.
* backend/pas/Makefile.am (idl_flags): Add `-I $(datadir)/idl' to
pick up IDL files in the installation prefix as well.
(INCLUDES): Use `$(BONOBO_GNOME_CFLAGS)'.
* backend/ebook/Makefile.am (ORBIT_IDL): Use `-I $(datadir)/idl'
to get the IDLs from the installation prefix as well.
(INCLUDES): Add `$(BONOBO_GNOME_CFLAGS)'.
(test_client_LDADD): Use `$(BONOBO_GNOME_LIBS)' instead of
hardcoding `-lbonobo'! Also get rid of some other useless flags,
as `$(BONOBO_GNOME_LIBS)' really has all what we need.
(test_client_list_LDADD): Likewise.
(test_card_LDADD): Likewise.
2000-04-18 Federico Mena Quintero <federico@helixcode.com>
* gui/minicard/Makefile.am (INCLUDES): Use "e-minicard" as the log
domain.
* gui/component/Makefile.am (INCLUDES): Use
"evolution-addressbook" as the log domain.
* backend/pas/Makefile.am: Build libpas.a, not a shared library.
Do not install any header files.
(INCLUDES): Remove spurious include paths.
* backend/pas/*.[ch]: Fix includes.
* backend/ebook/Makefile.am: Do not install the test programs.
Fixed some include weirdness.
* backend/ebook/*.[ch]: Fix includes.
* contact-editor/Makefile.am (INCLUDES): Set the log domain to
"contact-editor".
(INCLUDES): Fix.
* contact-editor/*.[ch]: Fix includes.
* gui/minicard/*.[ch]: Fix includes.
* ChangeLog: Started a ChangeLog here.
