# Copyright © 2000-2004 Marco Pesenti Gritti # Copyright © 2003, 2004, 2005, 2006, 2007 Christian Persch # # This program is free software; you can redistribute it and/or modify it # under the terms of the GNU General Public License as published by the # Free Software Foundation; either version 2 of the License, or (at your # option) any later version. # # This program is distributed in the hope that it will be useful, but # WITHOUT ANY WARRANTY; without even the implied warranty of # MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the GNU # General Public License for more details. # # You should have received a copy of the GNU General Public License along # with this program; if not, write to the Free Software Foundation, Inc., # 51 Franklin Street, Fifth Floor, Boston, MA 02110-1301 USA # LIBXUL_INIT([DO-CHECK],[ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND]) # # Checks for libxul, and aborts if it's not found # # Checks for -fshort-wchar compiler variable, and adds it to # AM_CXXFLAGS if found # # Checks whether RTTI is enabled, and adds -fno-rtti to # AM_CXXFLAGS otherwise # # Checks whether the gecko build is a debug build, and adds # debug flags to AM_CXXFLAGS if it is. AC_DEFUN([LIBXUL_INIT], [AC_REQUIRE([PKG_PROG_PKG_CONFIG])dnl PKG_CHECK_EXISTS([libxul],[libxul_cv_have_libxul=yes],[libxul_cv_have_libxul=no]) if test "$libxul_cv_have_libxul" != "yes"; then AC_MSG_ERROR([libxul not found]) fi libxul_cv_prefix="$($PKG_CONFIG --variable=prefix libxul)" libxul_cv_include_root="$($PKG_CONFIG --variable=includedir libxul)" libxul_cv_libdir="$($PKG_CONFIG --variable=sdkdir libxul)" libxul_cv_includes="-I${libxul_cv_include_root}/stable -I${libxul_cv_include_root}/unstable" AC_DEFINE([HAVE_LIBXUL],[1],[Define for libxul]) LIBXUL_PREFIX="$libxul_cv_prefix" LIBXUL_INCLUDE_ROOT="$libxul_cv_include_root" LIBXUL_INCLUDES="$libxul_cv_includes" LIBXUL_LIBDIR="$libxul_cv_libdir" # ************************************************************** # This is really gcc-only # Do this test using CXX only since some versions of gcc # 2.95-2.97 have a signed wchar_t in c++ only and some versions # only have short-wchar support for c++. # ************************************************************** LIBXUL_CXXCPPFLAGS= LIBXUL_CXXFLAGS= LIBXUL_LDFLAGS= AC_LANG_PUSH([C++]) _SAVE_CXXFLAGS=$CXXFLAGS CXXFLAGS="$CXXFLAGS $LIBXUL_CXXFLAGS -fshort-wchar" AC_CACHE_CHECK([for compiler -fshort-wchar option], libxul_cv_have_usable_wchar_option, [AC_RUN_IFELSE([AC_LANG_SOURCE( [[#include int main () { return (sizeof(wchar_t) != 2) || (wchar_t)-1 < (wchar_t) 0 ; } ]])], [libxul_cv_have_usable_wchar_option="yes"], [libxul_cv_have_usable_wchar_option="no"], [libxul_cv_have_usable_wchar_option="maybe (cross-compiling)"])]) CXXFLAGS="$_SAVE_CXXFLAGS" AC_LANG_POP([C++]) if test "$libxul_cv_have_usable_wchar_option" = "yes"; then LIBXUL_CXXFLAGS="$LIBXUL_CXXFLAGS -fshort-wchar" fi # ************** # Check for RTTI # ************** AC_MSG_CHECKING([whether to enable C++ RTTI]) AC_ARG_ENABLE([cpp-rtti], AS_HELP_STRING([--enable-cpp-rtti],[Enable C++ RTTI]), [],[enable_cpp_rtti=no]) AC_MSG_RESULT([$enable_cpp_rtti]) if test "$enable_cpp_rtti" = "no"; then LIBXUL_CXXFLAGS="-fno-rtti $LIBXUL_CXXFLAGS" fi # ************* # Various tests # ************* # FIXMEchpe: remove this test, it shouldn't be needed anymore thanks to static glue libs AC_LANG_PUSH([C++]) _SAVE_CPPFLAGS="$CPPFLAGS" CPPFLAGS="$CPPFLAGS $LIBXUL_CXXCPPFLAGS $LIBXUL_INCLUDES" AC_MSG_CHECKING([[whether we have a libxul debug build]]) AC_COMPILE_IFELSE( [AC_LANG_SOURCE([[#include #if !defined(MOZ_REFLOW_PERF) || !defined(MOZ_REFLOW_PERF_DSP) #error No #endif]] )], [libxul_cv_have_debug=yes], [libxul_cv_have_debug=no]) AC_MSG_RESULT([$libxul_cv_have_debug]) CPPFLAGS="$_SAVE_CPPFLAGS" AC_LANG_POP([C++]) if test "$libxul_cv_have_debug" = "yes"; then LIBXUL_CXXCPPFLAGS="$LIBXUL_CXXCPPFLAGS -DDEBUG -D_DEBUG" AC_DEFINE([HAVE_LIBXUL_DEBUG],[1],[Define if libxul is a debug build]) fi # ********* # Finish up # ********* AC_SUBST([LIBXUL_PREFIX]) AC_SUBST([LIBXUL_INCLUDE_ROOT]) AC_SUBST([LIBXUL_INCLUDES]) AC_SUBST([LIBXUL_LIBDIR]) AC_SUBST([LIBXUL_CXXCPPFLAGS]) AC_SUBST([LIBXUL_CXXFLAGS]) AC_SUBST([LIBXUL_LDFLAGS]) ]) # LIBXUL_DEFINES # # Automake defines for libxul. Not included in LIBXUL_INIT so that # LIBXUL_INIT may be called conditionally. If you use LIBXUL_INIT, # you _must_ call LIBXUL_DEFINES, unconditionally. AC_DEFUN([LIBXUL_DEFINES], [ AM_CONDITIONAL([HAVE_LIBXUL],[test "$libxul_cv_have_libxul" = "yes"]) AM_CONDITIONAL([HAVE_LIBXUL_DEBUG],[test "$libxul_cv_have_debug" = "yes"]) ]) # *************************************************************************** # *************************************************************************** # *************************************************************************** # _LIBXUL_DISPATCH(MACRO, INCLUDEDIRS, ...) m4_define([_LIBXUL_DISPATCH], [ AC_LANG_PUSH([C++]) _SAVE_CPPFLAGS="$CPPFLAGS" _SAVE_CXXFLAGS="$CXXFLAGS" _SAVE_LDFLAGS="$LDFLAGS" _SAVE_LIBS="$LIBS" CPPFLAGS="$CPPFLAGS $LIBXUL_CXXCPPFLAGS $LIBXUL_INCLUDES" CXXFLAGS="$CXXFLAGS $LIBXUL_CXXFLAGS $($PKG_CONFIG --cflags-only-other libxul)" LDFLAGS="$LDFLAGS $LIBXUL_LDFLAGS -Wl,--rpath=$LIBXUL_LIBDIR" LIBS="$LIBS $($PKG_CONFIG --libs libxul)" # FIXMEchpe: remove this, since the header layout is now flat (only stable and unstable) _LIBXUL_DISPATCH_INCLUDEDIRS="$2" _LIBXUL_DISPATCH_INCLUDEDIRS="$_LIBXUL_DISPATCH_INCLUDEDIRS dom necko pref" # Now add them to CPPFLAGS for i in $_LIBXUL_DISPATCH_INCLUDEDIRS; do CPPFLAGS="$CPPFLAGS -I$LIBXUL_INCLUDE_ROOT/$i" done m4_indir([$1],m4_shiftn(2,$@)) CPPFLAGS="$_SAVE_CPPFLAGS" CXXFLAGS="$_SAVE_CXXFLAGS" LDFLAGS="$_SAVE_LDFLAGS" LIBS="$_SAVE_LIBS" AC_LANG_POP([C++]) ])# _LIBXUL_DISPATCH # *************************************************************************** # *************************************************************************** # *************************************************************************** # LIBXUL_CHECK_HEADERS(INCLUDEDIRS, HEADERS, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [INCLUDES]) AC_DEFUN([LIBXUL_CHECK_HEADERS],[_LIBXUL_DISPATCH([AC_CHECK_HEADERS],$@)]) # LIBXUL_COMPILE_IFELSE(INCLUDEDIRS, PROGRAM, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) AC_DEFUN([LIBXUL_COMPILE_IFELSE],[_LIBXUL_DISPATCH([AC_COMPILE_IFELSE],$@)]) # LIBXUL_RUN_IFELSE(INCLUDEDIRS, PROGRAM, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) AC_DEFUN([LIBXUL_RUN_IFELSE],[_LIBXUL_DISPATCH([AC_RUN_IFELSE],$@)]) # *************************************************************************** # *************************************************************************** # *************************************************************************** # LIBXUL_XPCOM_PROGRAM([PROLOGUE], [BODY]) # # Produce a template C++ program which starts XPCOM up and shuts it down after # the BODY part has run. In BODY, the the following variables are predeclared: # # nsresult rv # int status = 1 (EXIT_FAILURE) # # The program's exit status will be |status|; set it to 0 (or EXIT_SUCCESS) # to indicate success and to a value between 1 (EXIT_FAILURE) and 120 to # indicate failure. # # To jump out of the BODY and exit the test program, you can use |break|. AC_DEFUN([LIBXUL_XPCOM_PROGRAM], [AC_LANG_PROGRAM([[ #include #include #include #include #include #include #include #include ]] [$1], [[ // redirect unwanted mozilla debug output to the bit bucket freopen ("/dev/null", "w", stdout); nsresult rv; nsCOMPtr directory; rv = NS_NewNativeLocalFile (NS_LITERAL_CSTRING("$_LIBXUL_HOME"), PR_FALSE, getter_AddRefs (directory)); if (NS_FAILED (rv) || !directory) { exit (126); } rv = NS_InitXPCOM2 (nsnull, directory, nsnull); if (NS_FAILED (rv)) { exit (125); } int status = EXIT_FAILURE; // now put in the BODY, scoped with do...while(0) to ensure we don't hold a // COMptr after XPCOM shutdown and so we can jump out with a simple |break|. do { ]] m4_shiftn(1,$@) [[ } while (0); NS_ShutdownXPCOM (nsnull); exit (status); ]]) ]) # LIBXUL_XPCOM_PROGRAM # *************************************************************************** # *************************************************************************** # *************************************************************************** # LIBXUL_XPCOM_PROGRAM_CHECK([ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND], [ACTION-IF-CROSS-COMPILING]) # # Checks whether we can build and run any XPCOM test programs at all AC_DEFUN([LIBXUL_XPCOM_PROGRAM_CHECK], [AC_REQUIRE([LIBXUL_INIT])dnl AC_CACHE_CHECK([whether we can compile and run XPCOM programs], [libxul_cv_xpcom_program_check], [ libxul_cv_xpcom_program_check=no LIBXUL_RUN_IFELSE([], [LIBXUL_XPCOM_PROGRAM([],[[status = EXIT_SUCCESS;]])], [libxul_cv_xpcom_program_check=yes], [libxul_cv_xpcom_program_check=no], [libxul_cv_xpcom_program_check=maybe]) ]) if test "$libxul_cv_xpcom_program_check" = "yes"; then ifelse([$2],,[:],[$2]) else ifelse([$3],,[AC_MSG_FAILURE([Cannot compile and run XPCOM programs])], [$3]) fi ]) # LIBXUL_XPCOM_PROGRAM_CHECK # *************************************************************************** # *************************************************************************** # *************************************************************************** # LIBXUL_CHECK_CONTRACTID(CONTRACTID, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Checks wheter CONTRACTID is a registered contract ID AC_DEFUN([LIBXUL_CHECK_CONTRACTID], [AC_REQUIRE([LIBXUL_INIT])dnl AS_VAR_PUSHDEF([libxul_cv_have_CID],[libxul_cv_have_$1]) AC_CACHE_CHECK([for the $1 XPCOM component], libxul_cv_have_CID, [ AS_VAR_SET(libxul_cv_have_CID,[no]) LIBXUL_RUN_IFELSE([], [LIBXUL_XPCOM_PROGRAM([[ #include ]],[[ status = 99; nsCOMPtr registrar; rv = NS_GetComponentRegistrar (getter_AddRefs (registrar)); if (NS_FAILED (rv)) break; status = 98; PRBool isRegistered = PR_FALSE; rv = registrar->IsContractIDRegistered ("$1", &isRegistered); if (NS_FAILED (rv)) break; status = isRegistered ? EXIT_SUCCESS : 97; ]]) ], [AS_VAR_SET(libxul_cv_have_CID,[yes])], [AS_VAR_SET(libxul_cv_have_CID,[no])], [AS_VAR_SET(libxul_cv_have_CID,[maybe])]) ]) if test AS_VAR_GET(libxul_cv_have_CID) = "yes"; then ifelse([$2],,[:],[$2]) else ifelse([$3],,[AC_MSG_ERROR([dnl Contract ID "$1" is not registered, but $PACKAGE_NAME depends on it.])], [$3]) fi AS_VAR_POPDEF([libxul_cv_have_CID]) ]) # LIBXUL_CHECK_CONTRACTID # LIBXUL_CHECK_CONTRACTIDS(CONTRACTID, [ACTION-IF-FOUND], [ACTION-IF-NOT-FOUND]) # # Checks wheter CONTRACTIDs are registered contract IDs. # If ACTION-IF-NOT-FOUND is given, it is executed when one of the contract IDs # is not found and the missing contract ID is in the |as_contractid| variable. AC_DEFUN([LIBXUL_CHECK_CONTRACTIDS], [AC_REQUIRE([LIBXUL_INIT])dnl result=yes as_contractid= for as_contractid in $1 do LIBXUL_CHECK_CONTRACTID([$as_contractid],[],[result=no; break;]) done if test "$result" = "yes"; then ifelse([$2],,[:],[$2]) else ifelse([$3],,[AC_MSG_ERROR([dnl Contract ID "$as_contractid" is not registered, but $PACKAGE_NAME depends on it.])], [$3]) fi ]) # LIBXUL_CHECK_CONTRACTIDS # *************************************************************************** # *************************************************************************** # *************************************************************************** # LIBXUL_XPIDL([ACTION-IF-FOUND],[ACTION-IF-NOT-FOUND]) # # Checks for xpidl program and include directory # # Variables set: # XPIDL: the xpidl program # XPIDL_IDLDIR: the xpidl include directory AC_DEFUN([LIBXUL_XPIDL], [AC_REQUIRE([LIBXUL_INIT])dnl _C_PATH_PROG([XPIDL],[xpidl],[no],[$LIBXUL_LIBDIR:$PATH]) XPIDL_IDLDIR="$($PKG_CONFIG --variable=idldir libxul)" if test "$XPIDL" != "no" -a -n "$XPIDL_IDLDIR" -a -f "$XPIDL_IDLDIR/nsISupports.idl"; then ifelse([$1],,[:],[$1]) else ifelse([$2],,[AC_MSG_FAILURE([XPIDL program or include directory not found])],[$2]) fi ])