// Copyright 2014 The go-ethereum Authors
// This file is part of the go-ethereum library.
//
// The go-ethereum library is free software: you can redistribute it and/or modify
// it under the terms of the GNU Lesser General Public License as published by
// the Free Software Foundation, either version 3 of the License, or
// (at your option) any later version.
//
// The go-ethereum library is distributed in the hope that it will be useful,
// but WITHOUT ANY WARRANTY; without even the implied warranty of
// MERCHANTABILITY or FITNESS FOR A PARTICULAR PURPOSE. See the
// GNU Lesser General Public License for more details.
//
// You should have received a copy of the GNU Lesser General Public License
// along with the go-ethereum library. If not, see <http://www.gnu.org/licenses/>.
package vm
import (
"math/big"
"sync/atomic"
"time"
"github.com/ethereum/go-ethereum/common"
"github.com/ethereum/go-ethereum/crypto"
"github.com/ethereum/go-ethereum/params"
)
// emptyCodeHash is used by create to ensure deployment is disallowed to already
// deployed contract addresses (relevant after the account abstraction).
var emptyCodeHash = crypto.Keccak256Hash(nil)
type (
CanTransferFunc func(StateDB, common.Address, *big.Int) bool
TransferFunc func(StateDB, common.Address, common.Address, *big.Int)
// GetHashFunc returns the nth block hash in the blockchain
// and is used by the BLOCKHASH EVM op code.
GetHashFunc func(uint64) common.Hash
)
// run runs the given contract and takes care of running precompiles with a fallback to the byte code interpreter.
func run(evm *EVM, contract *Contract, input []byte) ([]byte, error) {
if contract.CodeAddr != nil {
precompiles := PrecompiledContractsHomestead
if evm.ChainConfig().IsByzantium(evm.BlockNumber) {
precompiles = PrecompiledContractsByzantium
}
if p := precompiles[*contract.CodeAddr]; p != nil {
return RunPrecompiledContract(p, input, contract)
}
}
return evm.interpreter.Run(contract, input)
}
// Context provides the EVM with auxiliary information. Once provided
// it shouldn't be modified.
type Context struct {
// CanTransfer returns whether the account contains
// sufficient ether to transfer the value
CanTransfer CanTransferFunc
// Transfer transfers ether from one account to the other
Transfer TransferFunc
// GetHash returns the hash corresponding to n
GetHash GetHashFunc
// Message information
Origin common.Address // Provides information for ORIGIN
GasPrice *big.Int // Provides information for GASPRICE
// Block information
Coinbase common.Address // Provides information for COINBASE
GasLimit uint64 // Provides information for GASLIMIT
BlockNumber *big.Int // Provides information for NUMBER
Time *big.Int // Provides information for TIME
Difficulty *big.Int // Provides information for DIFFICULTY
}
// EVM is the Ethereum Virtual Machine base object and provides
// the necessary tools to run a contract on the given state with
// the provided context. It should be noted that any error
// generated through any of the calls should be considered a
// revert-state-and-consume-all-gas operation, no checks on
// specific errors should ever be performed. The interpreter makes
// sure that any errors generated are to be considered faulty code.
//
// The EVM should never be reused and is not thread safe.
type EVM struct {
// Context provides auxiliary blockchain related information
Context
// StateDB gives access to the underlying state
StateDB StateDB
// Depth is the current call stack
depth int
// chainConfig contains information about the current chain
chainConfig *params.ChainConfig
// chain rules contains the chain rules for the current epoch
chainRules params.Rules
// virtual machine configuration options used to initialise the
// evm.
vmConfig Config
// global (to this context) ethereum virtual machine
// used throughout the execution of the tx.
interpreter *Interpreter
// abort is used to abort the EVM calling operations
// NOTE: must be set atomically
abort int32
// callGasTemp holds the gas available for the current call. This is needed because the
// available gas is calculated in gasCall* according to the 63/64 rule and later
// applied in opCall*.
callGasTemp uint64
}
// NewEVM returns a new EVM. The returned EVM is not thread safe and should
// only ever be used *once*.
func NewEVM(ctx Context, statedb StateDB, chainConfig *params.ChainConfig, vmConfig Config) *EVM {
evm := &EVM{
Context: ctx,
StateDB: statedb,
vmConfig: vmConfig,
chainConfig: chainConfig,
chainRules: chainConfig.Rules(ctx.BlockNumber),
}
evm.interpreter = NewInterpreter(evm, vmConfig)
return evm
}
// Cancel cancels any running EVM operation. This may be called concurrently and
// it's safe to be called multiple times.
func (evm *EVM) Cancel() {
atomic.StoreInt32(&evm.abort, 1)
}
// Call executes the contract associated with the addr with the given input as
// parameters. It also handles any necessary value transfer required and takes
// the necessary steps to create accounts and reverses the state in case of an
// execution error or failed value transfer.
func (evm *EVM) Call(caller ContractRef, addr common.Address, input []byte, gas uint64, value *big.Int) (ret []byte, leftOverGas uint64, err error) {
if evm.vmConfig.NoRecursion && evm.depth > 0 {
return nil, gas, nil
}
// Fail if we're trying to execute above the call depth limit
if evm.depth > int(params.CallCreateDepth) {
return nil, gas, ErrDepth
}
// Fail if we're trying to transfer more than the available balance
if !evm.Context.CanTransfer(evm.StateDB, caller.Address(), value) {
return nil, gas, ErrInsufficientBalance
}
var (
to = AccountRef(addr)
snapshot = evm.StateDB.Snapshot()
)
if !evm.StateDB.Exist(addr) {
precompiles := PrecompiledContractsHomestead
if evm.ChainConfig().IsByzantium(evm.BlockNumber) {
precompiles = PrecompiledContractsByzantium
}
if precompiles[addr] == nil && evm.ChainConfig().IsEIP158(evm.BlockNumber) && value.Sign() == 0 {
// Calling a non existing account, don't do antything, but ping the tracer
if evm.vmConfig.Debug && evm.depth == 0 {
evm.vmConfig.Tracer.CaptureStart(caller.Address(), addr, false, input, gas, value)
evm.vmConfig.Tracer.CaptureEnd(ret, 0, 0, nil)
}
return nil, gas, nil
}
evm.StateDB.CreateAccount(addr)
}
evm.Transfer(evm.StateDB, caller.Address(), to.Address(), value)
// Initialise a new contract and set the code that is to be used by the EVM.
// The contract is a scoped environment for this execution context only.
contract := NewContract(caller, to, value, gas)
contract.SetCallCode(&addr, evm.StateDB.GetCodeHash(addr), evm.StateDB.GetCode(addr))
start := time.Now()
// Capture the tracer start/end events in debug mode
if evm.vmConfig.Debug && evm.depth == 0 {
evm.vmConfig.Tracer.CaptureStart(caller.Address(), addr, false, input, gas, value)
defer func() { // Lazy evaluation of the parameters
evm.vmConfig.Tracer.CaptureEnd(ret, gas-contract.Gas, time.Since(start), err)
}()
}
ret, err = run(evm, contract, input)
// When an error was returned by the EVM or when setting the creation code
// above we revert to the snapshot and consume any gas remaining. Additionally
// when we're in homestead this also counts for code storage gas errors.
if err != nil {
evm.StateDB.RevertToSnapshot(snapshot)
if err != errExecutionReverted {
contract.UseGas(contract.Gas)
}
}
return ret, contract.Gas, err
}
// CallCode executes the contract associated with the addr with the given input
// as parameters. It also handles any necessary value transfer required and takes
// the necessary steps to create accounts and reverses the state in case of an
// execution error or failed value transfer.
//
// CallCode differs from Call in the sense that it executes the given address'
// code with the caller as context.
func (evm *EVM) CallCode(caller ContractRef, addr common.Address, input []byte, gas uint64, value *big.Int) (ret []byte, leftOverGas uint64, err error) {
if evm.vmConfig.NoRecursion && evm.depth > 0 {
return nil, gas, nil
}
// Fail if we're trying to execute above the call depth limit
if evm.depth > int(params.CallCreateDepth) {
return nil, gas, ErrDepth
}
// Fail if we're trying to transfer more than the available balance
if !evm.CanTransfer(evm.StateDB, caller.Address(), value) {
return nil, gas, ErrInsufficientBalance
}
var (
snapshot = evm.StateDB.Snapshot()
to = AccountRef(caller.Address())
)
// initialise a new contract and set the code that is to be used by the
// EVM. The contract is a scoped environment for this execution context
// only.
contract := NewContract(caller, to, value, gas)
contract.SetCallCode(&addr, evm.StateDB.GetCodeHash(addr), evm.StateDB.GetCode(addr))
ret, err = run(evm, contract, input)
if err != nil {
evm.StateDB.RevertToSnapshot(snapshot)
if err != errExecutionReverted {
contract.UseGas(contract.Gas)
}
}
return ret, contract.Gas, err
}
// DelegateCall executes the contract associated with the addr with the given input
// as parameters. It reverses the state in case of an execution error.
//
// DelegateCall differs from CallCode in the sense that it executes the given address'
// code with the caller as context and the caller is set to the caller of the caller.
func (evm *EVM) DelegateCall(caller ContractRef, addr common.Address, input []byte, gas uint64) (ret []byte, leftOverGas uint64, err error) {
if evm.vmConfig.NoRecursion && evm.depth > 0 {
return nil, gas, nil
}
// Fail if we're trying to execute above the call depth limit
if evm.depth > int(params.CallCreateDepth) {
return nil, gas, ErrDepth
}
var (
snapshot = evm.StateDB.Snapshot()
to = AccountRef(caller.Address())
)
// Initialise a new contract and make initialise the delegate values
contract := NewContract(caller, to, nil, gas).AsDelegate()
contract.SetCallCode(&addr, evm.StateDB.GetCodeHash(addr), evm.StateDB.GetCode(addr))
ret, err = run(evm, contract, input)
if err != nil {
evm.StateDB.RevertToSnapshot(snapshot)
if err != errExecutionReverted {
contract.UseGas(contract.Gas)
}
}
return ret, contract.Gas, err
}
// StaticCall executes the contract associated with the addr with the given input
// as parameters while disallowing any modifications to the state during the call.
// Opcodes that attempt to perform such modifications will result in exceptions
// instead of performing the modifications.
func (evm *EVM) StaticCall(caller ContractRef, addr common.Address, input []byte, gas uint64) (ret []byte, leftOverGas uint64, err error) {
if evm.vmConfig.NoRecursion && evm.depth > 0 {
return nil, gas, nil
}
// Fail if we're trying to execute above the call depth limit
if evm.depth > int(params.CallCreateDepth) {
return nil, gas, ErrDepth
}
// Make sure the readonly is only set if we aren't in readonly yet
// this makes also sure that the readonly flag isn't removed for
// child calls.
if !evm.interpreter.readOnly {
evm.interpreter.readOnly = true
defer func() { evm.interpreter.readOnly = false }()
}
var (
to = AccountRef(addr)
snapshot = evm.StateDB.Snapshot()
)
// Initialise a new contract and set the code that is to be used by the
// EVM. The contract is a scoped environment for this execution context
// only.
contract := NewContract(caller, to, new(big.Int), gas)
contract.SetCallCode(&addr, evm.StateDB.GetCodeHash(addr), evm.StateDB.GetCode(addr))
// When an error was returned by the EVM or when setting the creation code
// above we revert to the snapshot and consume any gas remaining. Additionally
// when we're in Homestead this also counts for code storage gas errors.
ret, err = run(evm, contract, input)
if err != nil {
evm.StateDB.RevertToSnapshot(snapshot)
if err != errExecutionReverted {
contract.UseGas(contract.Gas)
}
}
return ret, contract.Gas, err
}
// Create creates a new contract using code as deployment code.
func (evm *EVM) Create(caller ContractRef, code []byte, gas uint64, value *big.Int) (ret []byte, contractAddr common.Address, leftOverGas uint64, err error) {
// Depth check execution. Fail if we're trying to execute above the
// limit.
if evm.depth > int(params.CallCreateDepth) {
return nil, common.Address{}, gas, ErrDepth
}
if !evm.CanTransfer(evm.StateDB, caller.Address(), value) {
return nil, common.Address{}, gas, ErrInsufficientBalance
}
// Ensure there's no existing contract already at the designated address
nonce := evm.StateDB.GetNonce(caller.Address())
evm.StateDB.SetNonce(caller.Address(), nonce+1)
contractAddr = crypto.CreateAddress(caller.Address(), nonce)
contractHash := evm.StateDB.GetCodeHash(contractAddr)
if evm.StateDB.GetNonce(contractAddr) != 0 || (contractHash != (common.Hash{}) && contractHash != emptyCodeHash) {
return nil, common.Address{}, 0, ErrContractAddressCollision
}
// Create a new account on the state
snapshot := evm.StateDB.Snapshot()
evm.StateDB.CreateAccount(contractAddr)
if evm.ChainConfig().IsEIP158(evm.BlockNumber) {
evm.StateDB.SetNonce(contractAddr, 1)
}
evm.Transfer(evm.StateDB, caller.Address(), contractAddr, value)
// initialise a new contract and set the code that is to be used by the
// EVM. The contract is a scoped environment for this execution context
// only.
contract := NewContract(caller, AccountRef(contractAddr), value, gas)
contract.SetCallCode(&contractAddr, crypto.Keccak256Hash(code), code)
if evm.vmConfig.NoRecursion && evm.depth > 0 {
return nil, contractAddr, gas, nil
}
if evm.vmConfig.Debug && evm.depth == 0 {
evm.vmConfig.Tracer.CaptureStart(caller.Address(), contractAddr, true, code, gas, value)
}
start := time.Now()
ret, err = run(evm, contract, nil)
// check whether the max code size has been exceeded
maxCodeSizeExceeded := evm.ChainConfig().IsEIP158(evm.BlockNumber) && len(ret) > params.MaxCodeSize
// if the contract creation ran successfully and no errors were returned
// calculate the gas required to store the code. If the code could not
// be stored due to not enough gas set an error and let it be handled
// by the error checking condition below.
if err == nil && !maxCodeSizeExceeded {
createDataGas := uint64(len(ret)) * params.CreateDataGas
if contract.UseGas(createDataGas) {
evm.StateDB.SetCode(contractAddr, ret)
} else {
err = ErrCodeStoreOutOfGas
}
}
// When an error was returned by the EVM or when setting the creation code
// above we revert to the snapshot and consume any gas remaining. Additionally
// when we're in homestead this also counts for code storage gas errors.
if maxCodeSizeExceeded || (err != nil && (evm.ChainConfig().IsHomestead(evm.BlockNumber) || err != ErrCodeStoreOutOfGas)) {
evm.StateDB.RevertToSnapshot(snapshot)
if err != errExecutionReverted {
contract.UseGas(contract.Gas)
}
}
// Assign err if contract code size exceeds the max while the err is still empty.
if maxCodeSizeExceeded && err == nil {
err = errMaxCodeSizeExceeded
}
if evm.vmConfig.Debug && evm.depth == 0 {
evm.vmConfig.Tracer.CaptureEnd(ret, gas-contract.Gas, time.Since(start), err)
}
return ret, contractAddr, contract.Gas, err
}
// ChainConfig returns the environment's chain configuration
func (evm *EVM) ChainConfig() *params.ChainConfig { return evm.chainConfig }
// Interpreter returns the EVM interpreter
func (evm *EVM) Interpreter() *Interpreter { return evm.interpreter }
