diff options
Diffstat (limited to 'vendor/github.com/nsf/termbox-go/api.go')
| -rw-r--r-- | vendor/github.com/nsf/termbox-go/api.go | 458 |
1 files changed, 458 insertions, 0 deletions
diff --git a/vendor/github.com/nsf/termbox-go/api.go b/vendor/github.com/nsf/termbox-go/api.go new file mode 100644 index 000000000..b339e532f --- /dev/null +++ b/vendor/github.com/nsf/termbox-go/api.go @@ -0,0 +1,458 @@ +// +build !windows + +package termbox + +import "github.com/mattn/go-runewidth" +import "fmt" +import "os" +import "os/signal" +import "syscall" +import "runtime" + +// public API + +// Initializes termbox library. This function should be called before any other functions. +// After successful initialization, the library must be finalized using 'Close' function. +// +// Example usage: +// err := termbox.Init() +// if err != nil { +// panic(err) +// } +// defer termbox.Close() +func Init() error { + var err error + + out, err = os.OpenFile("/dev/tty", syscall.O_WRONLY, 0) + if err != nil { + return err + } + in, err = syscall.Open("/dev/tty", syscall.O_RDONLY, 0) + if err != nil { + return err + } + + err = setup_term() + if err != nil { + return fmt.Errorf("termbox: error while reading terminfo data: %v", err) + } + + signal.Notify(sigwinch, syscall.SIGWINCH) + signal.Notify(sigio, syscall.SIGIO) + + _, err = fcntl(in, syscall.F_SETFL, syscall.O_ASYNC|syscall.O_NONBLOCK) + if err != nil { + return err + } + _, err = fcntl(in, syscall.F_SETOWN, syscall.Getpid()) + if runtime.GOOS != "darwin" && err != nil { + return err + } + err = tcgetattr(out.Fd(), &orig_tios) + if err != nil { + return err + } + + tios := orig_tios + tios.Iflag &^= syscall_IGNBRK | syscall_BRKINT | syscall_PARMRK | + syscall_ISTRIP | syscall_INLCR | syscall_IGNCR | + syscall_ICRNL | syscall_IXON + tios.Lflag &^= syscall_ECHO | syscall_ECHONL | syscall_ICANON | + syscall_ISIG | syscall_IEXTEN + tios.Cflag &^= syscall_CSIZE | syscall_PARENB + tios.Cflag |= syscall_CS8 + tios.Cc[syscall_VMIN] = 1 + tios.Cc[syscall_VTIME] = 0 + + err = tcsetattr(out.Fd(), &tios) + if err != nil { + return err + } + + out.WriteString(funcs[t_enter_ca]) + out.WriteString(funcs[t_enter_keypad]) + out.WriteString(funcs[t_hide_cursor]) + out.WriteString(funcs[t_clear_screen]) + + termw, termh = get_term_size(out.Fd()) + back_buffer.init(termw, termh) + front_buffer.init(termw, termh) + back_buffer.clear() + front_buffer.clear() + + go func() { + buf := make([]byte, 128) + for { + select { + case <-sigio: + for { + n, err := syscall.Read(in, buf) + if err == syscall.EAGAIN || err == syscall.EWOULDBLOCK { + break + } + select { + case input_comm <- input_event{buf[:n], err}: + ie := <-input_comm + buf = ie.data[:128] + case <-quit: + return + } + } + case <-quit: + return + } + } + }() + + IsInit = true + return nil +} + +// Interrupt an in-progress call to PollEvent by causing it to return +// EventInterrupt. Note that this function will block until the PollEvent +// function has successfully been interrupted. +func Interrupt() { + interrupt_comm <- struct{}{} +} + +// Finalizes termbox library, should be called after successful initialization +// when termbox's functionality isn't required anymore. +func Close() { + quit <- 1 + out.WriteString(funcs[t_show_cursor]) + out.WriteString(funcs[t_sgr0]) + out.WriteString(funcs[t_clear_screen]) + out.WriteString(funcs[t_exit_ca]) + out.WriteString(funcs[t_exit_keypad]) + out.WriteString(funcs[t_exit_mouse]) + tcsetattr(out.Fd(), &orig_tios) + + out.Close() + syscall.Close(in) + + // reset the state, so that on next Init() it will work again + termw = 0 + termh = 0 + input_mode = InputEsc + out = nil + in = 0 + lastfg = attr_invalid + lastbg = attr_invalid + lastx = coord_invalid + lasty = coord_invalid + cursor_x = cursor_hidden + cursor_y = cursor_hidden + foreground = ColorDefault + background = ColorDefault + IsInit = false +} + +// Synchronizes the internal back buffer with the terminal. +func Flush() error { + // invalidate cursor position + lastx = coord_invalid + lasty = coord_invalid + + update_size_maybe() + + for y := 0; y < front_buffer.height; y++ { + line_offset := y * front_buffer.width + for x := 0; x < front_buffer.width; { + cell_offset := line_offset + x + back := &back_buffer.cells[cell_offset] + front := &front_buffer.cells[cell_offset] + if back.Ch < ' ' { + back.Ch = ' ' + } + w := runewidth.RuneWidth(back.Ch) + if w == 0 || w == 2 && runewidth.IsAmbiguousWidth(back.Ch) { + w = 1 + } + if *back == *front { + x += w + continue + } + *front = *back + send_attr(back.Fg, back.Bg) + + if w == 2 && x == front_buffer.width-1 { + // there's not enough space for 2-cells rune, + // let's just put a space in there + send_char(x, y, ' ') + } else { + send_char(x, y, back.Ch) + if w == 2 { + next := cell_offset + 1 + front_buffer.cells[next] = Cell{ + Ch: 0, + Fg: back.Fg, + Bg: back.Bg, + } + } + } + x += w + } + } + if !is_cursor_hidden(cursor_x, cursor_y) { + write_cursor(cursor_x, cursor_y) + } + return flush() +} + +// Sets the position of the cursor. See also HideCursor(). +func SetCursor(x, y int) { + if is_cursor_hidden(cursor_x, cursor_y) && !is_cursor_hidden(x, y) { + outbuf.WriteString(funcs[t_show_cursor]) + } + + if !is_cursor_hidden(cursor_x, cursor_y) && is_cursor_hidden(x, y) { + outbuf.WriteString(funcs[t_hide_cursor]) + } + + cursor_x, cursor_y = x, y + if !is_cursor_hidden(cursor_x, cursor_y) { + write_cursor(cursor_x, cursor_y) + } +} + +// The shortcut for SetCursor(-1, -1). +func HideCursor() { + SetCursor(cursor_hidden, cursor_hidden) +} + +// Changes cell's parameters in the internal back buffer at the specified +// position. +func SetCell(x, y int, ch rune, fg, bg Attribute) { + if x < 0 || x >= back_buffer.width { + return + } + if y < 0 || y >= back_buffer.height { + return + } + + back_buffer.cells[y*back_buffer.width+x] = Cell{ch, fg, bg} +} + +// Returns a slice into the termbox's back buffer. You can get its dimensions +// using 'Size' function. The slice remains valid as long as no 'Clear' or +// 'Flush' function calls were made after call to this function. +func CellBuffer() []Cell { + return back_buffer.cells +} + +// After getting a raw event from PollRawEvent function call, you can parse it +// again into an ordinary one using termbox logic. That is parse an event as +// termbox would do it. Returned event in addition to usual Event struct fields +// sets N field to the amount of bytes used within 'data' slice. If the length +// of 'data' slice is zero or event cannot be parsed for some other reason, the +// function will return a special event type: EventNone. +// +// IMPORTANT: EventNone may contain a non-zero N, which means you should skip +// these bytes, because termbox cannot recognize them. +// +// NOTE: This API is experimental and may change in future. +func ParseEvent(data []byte) Event { + event := Event{Type: EventKey} + ok := extract_event(data, &event) + if !ok { + return Event{Type: EventNone, N: event.N} + } + return event +} + +// Wait for an event and return it. This is a blocking function call. Instead +// of EventKey and EventMouse it returns EventRaw events. Raw event is written +// into `data` slice and Event's N field is set to the amount of bytes written. +// The minimum required length of the 'data' slice is 1. This requirement may +// vary on different platforms. +// +// NOTE: This API is experimental and may change in future. +func PollRawEvent(data []byte) Event { + if len(data) == 0 { + panic("len(data) >= 1 is a requirement") + } + + var event Event + if extract_raw_event(data, &event) { + return event + } + + for { + select { + case ev := <-input_comm: + if ev.err != nil { + return Event{Type: EventError, Err: ev.err} + } + + inbuf = append(inbuf, ev.data...) + input_comm <- ev + if extract_raw_event(data, &event) { + return event + } + case <-interrupt_comm: + event.Type = EventInterrupt + return event + + case <-sigwinch: + event.Type = EventResize + event.Width, event.Height = get_term_size(out.Fd()) + return event + } + } +} + +// Wait for an event and return it. This is a blocking function call. +func PollEvent() Event { + var event Event + + // try to extract event from input buffer, return on success + event.Type = EventKey + ok := extract_event(inbuf, &event) + if event.N != 0 { + copy(inbuf, inbuf[event.N:]) + inbuf = inbuf[:len(inbuf)-event.N] + } + if ok { + return event + } + + for { + select { + case ev := <-input_comm: + if ev.err != nil { + return Event{Type: EventError, Err: ev.err} + } + + inbuf = append(inbuf, ev.data...) + input_comm <- ev + ok := extract_event(inbuf, &event) + if event.N != 0 { + copy(inbuf, inbuf[event.N:]) + inbuf = inbuf[:len(inbuf)-event.N] + } + if ok { + return event + } + case <-interrupt_comm: + event.Type = EventInterrupt + return event + + case <-sigwinch: + event.Type = EventResize + event.Width, event.Height = get_term_size(out.Fd()) + return event + } + } + panic("unreachable") +} + +// Returns the size of the internal back buffer (which is mostly the same as +// terminal's window size in characters). But it doesn't always match the size +// of the terminal window, after the terminal size has changed, the internal +// back buffer will get in sync only after Clear or Flush function calls. +func Size() (width int, height int) { + return termw, termh +} + +// Clears the internal back buffer. +func Clear(fg, bg Attribute) error { + foreground, background = fg, bg + err := update_size_maybe() + back_buffer.clear() + return err +} + +// Sets termbox input mode. Termbox has two input modes: +// +// 1. Esc input mode. When ESC sequence is in the buffer and it doesn't match +// any known sequence. ESC means KeyEsc. This is the default input mode. +// +// 2. Alt input mode. When ESC sequence is in the buffer and it doesn't match +// any known sequence. ESC enables ModAlt modifier for the next keyboard event. +// +// Both input modes can be OR'ed with Mouse mode. Setting Mouse mode bit up will +// enable mouse button press/release and drag events. +// +// If 'mode' is InputCurrent, returns the current input mode. See also Input* +// constants. +func SetInputMode(mode InputMode) InputMode { + if mode == InputCurrent { + return input_mode + } + if mode&(InputEsc|InputAlt) == 0 { + mode |= InputEsc + } + if mode&(InputEsc|InputAlt) == InputEsc|InputAlt { + mode &^= InputAlt + } + if mode&InputMouse != 0 { + out.WriteString(funcs[t_enter_mouse]) + } else { + out.WriteString(funcs[t_exit_mouse]) + } + + input_mode = mode + return input_mode +} + +// Sets the termbox output mode. Termbox has four output options: +// +// 1. OutputNormal => [1..8] +// This mode provides 8 different colors: +// black, red, green, yellow, blue, magenta, cyan, white +// Shortcut: ColorBlack, ColorRed, ... +// Attributes: AttrBold, AttrUnderline, AttrReverse +// +// Example usage: +// SetCell(x, y, '@', ColorBlack | AttrBold, ColorRed); +// +// 2. Output256 => [1..256] +// In this mode you can leverage the 256 terminal mode: +// 0x01 - 0x08: the 8 colors as in OutputNormal +// 0x09 - 0x10: Color* | AttrBold +// 0x11 - 0xe8: 216 different colors +// 0xe9 - 0x1ff: 24 different shades of grey +// +// Example usage: +// SetCell(x, y, '@', 184, 240); +// SetCell(x, y, '@', 0xb8, 0xf0); +// +// 3. Output216 => [1..216] +// This mode supports the 3rd range of the 256 mode only. +// But you dont need to provide an offset. +// +// 4. OutputGrayscale => [1..26] +// This mode supports the 4th range of the 256 mode +// and black and white colors from 3th range of the 256 mode +// But you dont need to provide an offset. +// +// In all modes, 0x00 represents the default color. +// +// `go run _demos/output.go` to see its impact on your terminal. +// +// If 'mode' is OutputCurrent, it returns the current output mode. +// +// Note that this may return a different OutputMode than the one requested, +// as the requested mode may not be available on the target platform. +func SetOutputMode(mode OutputMode) OutputMode { + if mode == OutputCurrent { + return output_mode + } + + output_mode = mode + return output_mode +} + +// Sync comes handy when something causes desync between termbox's understanding +// of a terminal buffer and the reality. Such as a third party process. Sync +// forces a complete resync between the termbox and a terminal, it may not be +// visually pretty though. +func Sync() error { + front_buffer.clear() + err := send_clear() + if err != nil { + return err + } + + return Flush() +} |