aboutsummaryrefslogtreecommitdiffstats
diff options
context:
space:
mode:
-rw-r--r--README.md112
-rw-r--r--cmd/ethereum/flags.go9
-rw-r--r--cmd/mist/flags.go4
-rw-r--r--eth/backend.go2
-rwxr-xr-xinstall.sh53
5 files changed, 48 insertions, 132 deletions
diff --git a/README.md b/README.md
index 18392816a..bf4bf341b 100644
--- a/README.md
+++ b/README.md
@@ -24,7 +24,25 @@ Ethereum (CLI):
`go get github.com/ethereum/go-ethereum/cmd/ethereum`
-For further, detailed, build instruction please see the [Wiki](https://github.com/ethereum/go-ethereum/wiki/Building-Ethereum(Go))
+As of POC-8, go-ethereum uses [Godep](https://github.com/tools/godep) to manage dependencies. Assuming you have [your environment all set up](https://github.com/ethereum/go-ethereum/wiki/Building-Ethereum(Go)), switch to the go-ethereum repository root folder, and build/install the executable you need:
+
+Mist (GUI):
+
+```
+godep go build -v ./cmd/mist
+```
+
+Ethereum (CLI):
+
+```
+godep go build -v ./cmd/ethereum
+```
+
+Instead of `build`, you can use `install` which will also install the resulting binary.
+
+For prerequisites and detailed build instructions please see the [Wiki](https://github.com/ethereum/go-ethereum/wiki/Building-Ethereum(Go))
+
+If you intend to develop on go-ethereum, check the [Developers' Guide](https://github.com/ethereum/go-ethereum/wiki/Developers'-Guide)
Automated (dev) builds
======================
@@ -34,97 +52,47 @@ Automated (dev) builds
* [Windows] Coming soon™
* [Linux] Coming soon™
-Binaries
-========
+Executables
+===========
-Go Ethereum comes with several binaries found in
-[cmd](https://github.com/ethereum/go-ethereum/tree/master/cmd):
+Go Ethereum comes with several wrappers/executables found in
+[the `cmd` directory](https://github.com/ethereum/go-ethereum/tree/develop/cmd):
-* `mist` Official Ethereum Browser
-* `ethereum` Ethereum CLI
-* `ethtest` test tool which runs with the [tests](https://github.com/ethereum/testes) suit:
+* `mist` Official Ethereum Browser (ethereum GUI client)
+* `ethereum` Ethereum CLI (ethereum command line interface client)
+* `bootnode` runs a bootstrap node for the Discovery Protocol
+* `ethtest` test tool which runs with the [tests](https://github.com/ethereum/testes) suite:
`cat file | ethtest`.
* `evm` is a generic Ethereum Virtual Machine: `evm -code 60ff60ff -gas
10000 -price 0 -dump`. See `-h` for a detailed description.
-* `rlpdump` converts a rlp stream to `interface{}`.
-* `peerserver` simple P2P (noi-ethereum) peer server.
* `disasm` disassembles EVM code: `echo "6001" | disasm`
+* `rlpdump` converts a rlp stream to `interface{}`.
-General command line options
+Command line options
============================
+Both `mist` and `ethereum` can be configured via command line options, environment variables and config files.
+
+To get the options available:
+
```
-== Shared between ethereum and Mist ==
-
-= Settings
--id Set the custom identifier of the client (shows up on other clients)
--port Port on which the server will accept incomming connections
--upnp Enable UPnP
--maxpeer Desired amount of peers
--rpc Start JSON RPC
--dir Data directory used to store configs and databases
-
-= Utility
--h This
--import Import a private key
--genaddr Generates a new address and private key (destructive action)
--dump Dump a specific state of a block to stdout given the -number or -hash
--difftool Supress all output and prints VM output to stdout
--diff vm=only vm output, all=all output including state storage
-
-Ethereum only
-ethereum [options] [filename]
--js Start the JavaScript REPL
-filename Load the given file and interpret as JavaScript
--m Start mining blocks
-
-== Mist only ==
-
--asset_path absolute path to GUI assets directory
+ethereum -help
```
+For further details on options, see the [wiki](https://github.com/ethereum/go-ethereum/wiki/Command-Line-Options)
+
Contribution
============
-If you'd like to contribute to Ethereum please fork, fix, commit and
+If you'd like to contribute to go-ethereum please fork, fix, commit and
send a pull request. Commits who do not comply with the coding standards
are ignored (use gofmt!). If you send pull requests make absolute sure that you
commit on the `develop` branch and that you do not merge to master.
Commits that are directly based on master are simply ignored.
-For dependency management, we use [godep](https://github.com/tools/godep). After installing with `go get github.com/tools/godep`, run `godep restore` to ensure that changes to other repositories do not break the build. To update a dependency version (for example, to include a new upstream fix), run `go get -u <foo/bar>` then `godep update <foo/...>`. To track a new dependency, add it to the project as normal than run `godep save ./...`. Changes to the Godeps folder should be manually verified then commited.
-
-To make life easier try [git flow](http://nvie.com/posts/a-successful-git-branching-model/) it sets
-this all up and streamlines your work flow.
-
-Coding standards
-================
-
-Sources should be formatted according to the [Go Formatting
-Style](http://golang.org/doc/effective_go.html#formatting).
-
-Unless structs fields are supposed to be directly accesible, provide
-Getters and hide the fields through Go's exporting facility.
-
-When you comment put meaningful comments. Describe in detail what you
-want to achieve.
-
-*wrong*
-
-```go
-// Check if the value at x is greater than y
-if x > y {
- // It's greater!
-}
-```
-
-Everyone reading the source probably know what you wanted to achieve
-with above code. Those are **not** meaningful comments.
+For dependency management, we use [godep](https://github.com/tools/godep). After installing with `go get github.com/tools/godep`, run `godep restore` to ensure that changes to other repositories do not break the build. To update a dependency version (for example, to include a new upstream fix), run `go get -u <foo/bar>` then `godep update <foo/...>`. To track a new dependency, add it to the project as normal than run `godep save ./...`. Changes to the [Godeps folder](https://github.com/ethereum/go-ethereum/tree/develop/Godeps): should be manually verified then commited.
-While the project isn't 100% tested I want you to write tests non the
-less. I haven't got time to evaluate everyone's code in detail so I
-expect you to write tests for me so I don't have to test your code
-manually. (If you want to contribute by just writing tests that's fine
-too!)
+To make life easier try [git flow](http://nvie.com/posts/a-successful-git-branching-model/) it sets this all up and streamlines your work flow.
+See [Developers' Guide](https://github.com/ethereum/go-ethereum/wiki/Developers'-Guide)
diff --git a/cmd/ethereum/flags.go b/cmd/ethereum/flags.go
index 46a63d849..fe848397c 100644
--- a/cmd/ethereum/flags.go
+++ b/cmd/ethereum/flags.go
@@ -93,7 +93,7 @@ func Init() {
flag.IntVar(&VmType, "vm", 0, "Virtual Machine type: 0-1: standard, debug")
flag.StringVar(&Identifier, "id", "", "Custom client identifier")
flag.StringVar(&KeyRing, "keyring", "", "identifier for keyring to use")
- flag.StringVar(&KeyStore, "keystore", "db", "system to store keyrings: db|file (db)")
+ flag.StringVar(&KeyStore, "keystore", "db", "system to store keyrings: db|file")
flag.StringVar(&RpcListenAddress, "rpcaddr", "127.0.0.1", "address for json-rpc server to listen on")
flag.IntVar(&RpcPort, "rpcport", 8545, "port to start json-rpc server on")
@@ -106,8 +106,8 @@ func Init() {
flag.StringVar(&Datadir, "datadir", ethutil.DefaultDataDir(), "specifies the datadir to use")
flag.StringVar(&ConfigFile, "conf", defaultConfigFile, "config file")
flag.StringVar(&DebugFile, "debug", "", "debug file (no debugging if not set)")
- flag.IntVar(&LogLevel, "loglevel", int(logger.InfoLevel), "loglevel: 0-5: silent,error,warn,info,debug,debug detail)")
- flag.StringVar(&LogFormat, "logformat", "std", "logformat: std,raw)")
+ flag.IntVar(&LogLevel, "loglevel", int(logger.InfoLevel), "loglevel: 0-5 (= silent,error,warn,info,debug,debug detail)")
+ flag.StringVar(&LogFormat, "logformat", "std", "logformat: std,raw")
flag.BoolVar(&DiffTool, "difftool", false, "creates output for diff'ing. Sets LogLevel=0")
flag.StringVar(&DiffType, "diff", "all", "sets the level of diff output [vm, all]. Has no effect if difftool=false")
flag.BoolVar(&ShowGenesis, "genesis", false, "Dump the genesis block")
@@ -117,7 +117,7 @@ func Init() {
flag.StringVar(&DumpHash, "hash", "", "specify arg in hex")
flag.IntVar(&DumpNumber, "number", -1, "specify arg in number")
- flag.BoolVar(&StartMining, "mine", false, "start dagger mining")
+ flag.BoolVar(&StartMining, "mine", false, "start mining")
flag.BoolVar(&StartJsConsole, "js", false, "launches javascript console")
flag.BoolVar(&PrintVersion, "version", false, "prints version number")
flag.IntVar(&MinerThreads, "minerthreads", runtime.NumCPU(), "number of miner threads")
@@ -134,6 +134,7 @@ func Init() {
flag.StringVar(&BootNodes, "bootnodes", "", "space-separated node URLs for discovery bootstrap")
flag.IntVar(&MaxPeer, "maxpeer", 30, "maximum desired peers")
+ flag.IntVar(&MinerThreads, "minerthreads", runtime.NumCPU(), "number of miner threads")
flag.Parse()
diff --git a/cmd/mist/flags.go b/cmd/mist/flags.go
index 095defc38..139af5923 100644
--- a/cmd/mist/flags.go
+++ b/cmd/mist/flags.go
@@ -77,7 +77,7 @@ func Init() {
flag.IntVar(&VmType, "vm", 0, "Virtual Machine type: 0-1: standard, debug")
flag.StringVar(&Identifier, "id", "", "Custom client identifier")
flag.StringVar(&KeyRing, "keyring", "", "identifier for keyring to use")
- flag.StringVar(&KeyStore, "keystore", "db", "system to store keyrings: db|file (db)")
+ flag.StringVar(&KeyStore, "keystore", "db", "system to store keyrings: db|file")
flag.StringVar(&RpcListenAddress, "rpcaddr", "127.0.0.1", "address for json-rpc server to listen on")
flag.IntVar(&RpcPort, "rpcport", 8545, "port to start json-rpc server on")
flag.BoolVar(&StartRpc, "rpc", true, "start rpc server")
@@ -89,7 +89,7 @@ func Init() {
flag.StringVar(&Datadir, "datadir", ethutil.DefaultDataDir(), "specifies the datadir to use")
flag.StringVar(&ConfigFile, "conf", defaultConfigFile, "config file")
flag.StringVar(&DebugFile, "debug", "", "debug file (no debugging if not set)")
- flag.IntVar(&LogLevel, "loglevel", int(logger.InfoLevel), "loglevel: 0-5: silent,error,warn,info,debug,debug detail)")
+ flag.IntVar(&LogLevel, "loglevel", int(logger.InfoLevel), "loglevel: 0-5 (= silent,error,warn,info,debug,debug detail)")
flag.StringVar(&AssetPath, "asset_path", ethutil.DefaultAssetPath(), "absolute path to GUI assets directory")
diff --git a/eth/backend.go b/eth/backend.go
index e7eae99af..efdd43bf5 100644
--- a/eth/backend.go
+++ b/eth/backend.go
@@ -146,7 +146,7 @@ func New(config *Config) (*Ethereum, error) {
d, _ := db.Get([]byte("ProtocolVersion"))
protov := ethutil.NewValue(d).Uint()
if protov != ProtocolVersion && protov != 0 {
- path := path.Join(config.DataDir, "database")
+ path := path.Join(config.DataDir, "blockchain")
return nil, fmt.Errorf("Database version mismatch. Protocol(%d / %d). `rm -rf %s`", protov, ProtocolVersion, path)
}
diff --git a/install.sh b/install.sh
deleted file mode 100755
index 30a3802e4..000000000
--- a/install.sh
+++ /dev/null
@@ -1,53 +0,0 @@
-#!/bin/sh
-
-if [ "$1" == "" ]; then
- echo "Usage $0 executable branch"
- echo "executable ethereum | mist"
- echo "branch develop | master"
- exit
-fi
-
-exe=$1
-path=$exe
-branch=$2
-
-if [ "$branch" == "develop" ]; then
- path="cmd/$exe"
-fi
-
-# Test if go is installed
-command -v go >/dev/null 2>&1 || { echo >&2 "Unable to find 'go'. This script requires go."; exit 1; }
-
-# Test if $GOPATH is set
-if [ "$GOPATH" == "" ]; then
- echo "\$GOPATH not set"
- exit
-fi
-
-echo "changing branch to $branch"
-cd $GOPATH/src/github.com/ethereum/go-ethereum
-git checkout $branch
-
-# installing package dependencies doesn't work for develop
-# branch as go get always pulls from master head
-# so build will continue to fail, but this installs locally
-# for people who git clone since go install will manage deps
-
-#echo "go get -u -d github.com/ethereum/go-ethereum/$path"
-#go get -v -u -d github.com/ethereum/go-ethereum/$path
-#if [ $? != 0 ]; then
-# echo "go get failed"
-# exit
-#fi
-
-cd $GOPATH/src/github.com/ethereum/go-ethereum/$path
-
-if [ "$exe" == "mist" ]; then
- echo "Building Mist GUI. Assuming Qt is installed. If this step"
- echo "fails; please refer to: https://github.com/ethereum/go-ethereum/wiki/Building-Ethereum(Go)"
-else
- echo "Building ethereum CLI."
-fi
-
-go install
-echo "done. Please run $exe :-)"