package p2p
import (
"bytes"
"crypto/ecdsa"
"crypto/rand"
"errors"
"fmt"
"net"
"sync"
"time"
"github.com/ethereum/go-ethereum/logger"
"github.com/ethereum/go-ethereum/logger/glog"
"github.com/ethereum/go-ethereum/p2p/discover"
"github.com/ethereum/go-ethereum/p2p/nat"
"github.com/ethereum/go-ethereum/rlp"
)
const (
defaultDialTimeout = 10 * time.Second
refreshPeersInterval = 30 * time.Second
// This is the maximum number of inbound connection
// that are allowed to linger between 'accepted' and
// 'added as peer'.
maxAcceptConns = 50
// total timeout for encryption handshake and protocol
// handshake in both directions.
handshakeTimeout = 5 * time.Second
// maximum time allowed for reading a complete message.
// this is effectively the amount of time a connection can be idle.
frameReadTimeout = 1 * time.Minute
// maximum amount of time allowed for writing a complete message.
frameWriteTimeout = 5 * time.Second
)
var srvjslog = logger.NewJsonLogger()
// Server manages all peer connections.
//
// The fields of Server are used as configuration parameters.
// You should set them before starting the Server. Fields may not be
// modified while the server is running.
type Server struct {
// This field must be set to a valid secp256k1 private key.
PrivateKey *ecdsa.PrivateKey
// MaxPeers is the maximum number of peers that can be
// connected. It must be greater than zero.
MaxPeers int
// Name sets the node name of this server.
// Use common.MakeName to create a name that follows existing conventions.
Name string
// Bootstrap nodes are used to establish connectivity
// with the rest of the network.
BootstrapNodes []*discover.Node
// Protocols should contain the protocols supported
// by the server. Matching protocols are launched for
// each peer.
Protocols []Protocol
// If ListenAddr is set to a non-nil address, the server
// will listen for incoming connections.
//
// If the port is zero, the operating system will pick a port. The
// ListenAddr field will be updated with the actual address when
// the server is started.
ListenAddr string
// If set to a non-nil value, the given NAT port mapper
// is used to make the listening port available to the
// Internet.
NAT nat.Interface
// If Dialer is set to a non-nil value, the given Dialer
// is used to dial outbound peer connections.
Dialer *net.Dialer
// If NoDial is true, the server will not dial any peers.
NoDial bool
// Hooks for testing. These are useful because we can inhibit
// the whole protocol stack.
setupFunc
newPeerHook
ourHandshake *protoHandshake
lock sync.RWMutex // protects running and peers
running bool
peers map[discover.NodeID]*Peer
ntab *discover.Table
listener net.Listener
quit chan struct{}
loopWG sync.WaitGroup // {dial,listen,nat}Loop
peerWG sync.WaitGroup // active peer goroutines
peerConnect chan *discover.Node
}
type setupFunc func(net.Conn, *ecdsa.PrivateKey, *protoHandshake, *discover.Node, bool) (*conn, error)
type newPeerHook func(*Peer)
// Peers returns all connected peers.
func (srv *Server) Peers() (peers []*Peer) {
srv.lock.RLock()
defer srv.lock.RUnlock()
for _, peer := range srv.peers {
if peer != nil {
peers = append(peers, peer)
}
}
return
}
// PeerCount returns the number of connected peers.
func (srv *Server) PeerCount() int {
srv.lock.RLock()
n := len(srv.peers)
srv.lock.RUnlock()
return n
}
// SuggestPeer creates a connection to the given Node if it
// is not already connected.
func (srv *Server) SuggestPeer(n *discover.Node) {
srv.peerConnect <- n
}
// Broadcast sends an RLP-encoded message to all connected peers.
// This method is deprecated and will be removed later.
func (srv *Server) Broadcast(protocol string, code uint64, data interface{}) error {
var payload []byte
if data != nil {
var err error
payload, err = rlp.EncodeToBytes(data)
if err != nil {
return err
}
}
srv.lock.RLock()
defer srv.lock.RUnlock()
for _, peer := range srv.peers {
if peer != nil {
var msg = Msg{Code: code}
if data != nil {
msg.Payload = bytes.NewReader(payload)
msg.Size = uint32(len(payload))
}
peer.writeProtoMsg(protocol, msg)
}
}
return nil
}
// Start starts running the server.
// Servers can be re-used and started again after stopping.
func (srv *Server) Start() (err error) {
srv.lock.Lock()
defer srv.lock.Unlock()
if srv.running {
return errors.New("server already running")
}
glog.V(logger.Info).Infoln("Starting Server")
// static fields
if srv.PrivateKey == nil {
return fmt.Errorf("Server.PrivateKey must be set to a non-nil key")
}
if srv.MaxPeers <= 0 {
return fmt.Errorf("Server.MaxPeers must be > 0")
}
srv.quit = make(chan struct{})
srv.peers = make(map[discover.NodeID]*Peer)
srv.peerConnect = make(chan *discover.Node)
if srv.setupFunc == nil {
srv.setupFunc = setupConn
}
// node table
ntab, err := discover.ListenUDP(srv.PrivateKey, srv.ListenAddr, srv.NAT)
if err != nil {
return err
}
srv.ntab = ntab
// handshake
srv.ourHandshake = &protoHandshake{Version: baseProtocolVersion, Name: srv.Name, ID: ntab.Self().ID}
for _, p := range srv.Protocols {
srv.ourHandshake.Caps = append(srv.ourHandshake.Caps, p.cap())
}
// listen/dial
if srv.ListenAddr != "" {
if err := srv.startListening(); err != nil {
return err
}
}
if srv.Dialer == nil {
srv.Dialer = &net.Dialer{Timeout: defaultDialTimeout}
}
if !srv.NoDial {
srv.loopWG.Add(1)
go srv.dialLoop()
}
if srv.NoDial && srv.ListenAddr == "" {
glog.V(logger.Warn).Infoln("I will be kind-of useless, neither dialing nor listening.")
}
srv.running = true
return nil
}
func (srv *Server) startListening() error {
listener, err := net.Listen("tcp", srv.ListenAddr)
if err != nil {
return err
}
laddr := listener.Addr().(*net.TCPAddr)
srv.ListenAddr = laddr.String()
srv.listener = listener
srv.loopWG.Add(1)
go srv.listenLoop()
if !laddr.IP.IsLoopback() && srv.NAT != nil {
srv.loopWG.Add(1)
go func() {
nat.Map(srv.NAT, srv.quit, "tcp", laddr.Port, laddr.Port, "ethereum p2p")
srv.loopWG.Done()
}()
}
return nil
}
// Stop terminates the server and all active peer connections.
// It blocks until all active connections have been closed.
func (srv *Server) Stop() {
srv.lock.Lock()
if !srv.running {
srv.lock.Unlock()
return
}
srv.running = false
srv.lock.Unlock()
glog.V(logger.Info).Infoln("Stopping Server")
srv.ntab.Close()
if srv.listener != nil {
// this unblocks listener Accept
srv.listener.Close()
}
close(srv.quit)
srv.loopWG.Wait()
// No new peers can be added at this point because dialLoop and
// listenLoop are down. It is safe to call peerWG.Wait because
// peerWG.Add is not called outside of those loops.
for _, peer := range srv.peers {
peer.Disconnect(DiscQuitting)
}
srv.peerWG.Wait()
}
// Self returns the local node's endpoint information.
func (srv *Server) Self() *discover.Node {
return srv.ntab.Self()
}
// main loop for adding connections via listening
func (srv *Server) listenLoop() {
defer srv.loopWG.Done()
// This channel acts as a semaphore limiting
// active inbound connections that are lingering pre-handshake.
// If all slots are taken, no further connections are accepted.
slots := make(chan struct{}, maxAcceptConns)
for i := 0; i < maxAcceptConns; i++ {
slots <- struct{}{}
}
glog.V(logger.Info).Infoln("Listening on", srv.listener.Addr())
for {
<-slots
conn, err := srv.listener.Accept()
if err != nil {
return
}
glog.V(logger.Debug).Infof("Accepted conn %v\n", conn.RemoteAddr())
srv.peerWG.Add(1)
go func() {
srv.startPeer(conn, nil)
slots <- struct{}{}
}()
}
}
func (srv *Server) dialLoop() {
var (
dialed = make(chan *discover.Node)
dialing = make(map[discover.NodeID]bool)
findresults = make(chan []*discover.Node)
refresh = time.NewTimer(0)
)
defer srv.loopWG.Done()
defer refresh.Stop()
// TODO: maybe limit number of active dials
dial := func(dest *discover.Node) {
// Don't dial nodes that would fail the checks in addPeer.
// This is important because the connection handshake is a lot
// of work and we'd rather avoid doing that work for peers
// that can't be added.
srv.lock.RLock()
ok, _ := srv.checkPeer(dest.ID)
srv.lock.RUnlock()
if !ok || dialing[dest.ID] {
return
}
dialing[dest.ID] = true
srv.peerWG.Add(1)
go func() {
srv.dialNode(dest)
dialed <- dest
}()
}
srv.ntab.Bootstrap(srv.BootstrapNodes)
for {
select {
case <-refresh.C:
// Grab some nodes to connect to if we're not at capacity.
srv.lock.RLock()
needpeers := len(srv.peers) < srv.MaxPeers
srv.lock.RUnlock()
if needpeers {
go func() {
var target discover.NodeID
rand.Read(target[:])
findresults <- srv.ntab.Lookup(target)
}()
refresh.Stop()
}
case dest := <-srv.peerConnect:
dial(dest)
case dests := <-findresults:
for _, dest := range dests {
dial(dest)
}
refresh.Reset(refreshPeersInterval)
case dest := <-dialed:
delete(dialing, dest.ID)
case <-srv.quit:
// TODO: maybe wait for active dials
return
}
}
}
func (srv *Server) dialNode(dest *discover.Node) {
addr := &net.TCPAddr{IP: dest.IP, Port: dest.TCPPort}
glog.V(logger.Debug).Infof("Dialing %v\n", dest)
conn, err := srv.Dialer.Dial("tcp", addr.String())
if err != nil {
// dialLoop adds to the wait group counter when launching
// dialNode, so we need to count it down again. startPeer also
// does that when an error occurs.
srv.peerWG.Done()
glog.V(logger.Detail).Infof("dial error: %v", err)
return
}
srv.startPeer(conn, dest)
}
func (srv *Server) startPeer(fd net.Conn, dest *discover.Node) {
// TODO: handle/store session token
// Run setupFunc, which should create an authenticated connection
// and run the capability exchange. Note that any early error
// returns during that exchange need to call peerWG.Done because
// the callers of startPeer added the peer to the wait group already.
fd.SetDeadline(time.Now().Add(handshakeTimeout))
srv.lock.RLock()
atcap := len(srv.peers) == srv.MaxPeers
srv.lock.RUnlock()
conn, err := srv.setupFunc(fd, srv.PrivateKey, srv.ourHandshake, dest, atcap)
if err != nil {
fd.Close()
glog.V(logger.Debug).Infof("Handshake with %v failed: %v", fd.RemoteAddr(), err)
srv.peerWG.Done()
return
}
conn.MsgReadWriter = &netWrapper{
wrapped: conn.MsgReadWriter,
conn: fd, rtimeout: frameReadTimeout, wtimeout: frameWriteTimeout,
}
p := newPeer(fd, conn, srv.Protocols)
if ok, reason := srv.addPeer(conn.ID, p); !ok {
glog.V(logger.Detail).Infof("Not adding %v (%v)\n", p, reason)
p.politeDisconnect(reason)
srv.peerWG.Done()
return
}
// The handshakes are done and it passed all checks.
// Spawn the Peer loops.
go srv.runPeer(p)
}
func (srv *Server) runPeer(p *Peer) {
glog.V(logger.Debug).Infof("Added %v\n", p)
srvjslog.LogJson(&logger.P2PConnected{
RemoteId: p.ID().String(),
RemoteAddress: p.RemoteAddr().String(),
RemoteVersionString: p.Name(),
NumConnections: srv.PeerCount(),
})
if srv.newPeerHook != nil {
srv.newPeerHook(p)
}
discreason := p.run()
srv.removePeer(p)
glog.V(logger.Debug).Infof("Removed %v (%v)\n", p, discreason)
srvjslog.LogJson(&logger.P2PDisconnected{
RemoteId: p.ID().String(),
NumConnections: srv.PeerCount(),
})
}
func (srv *Server) addPeer(id discover.NodeID, p *Peer) (bool, DiscReason) {
srv.lock.Lock()
defer srv.lock.Unlock()
if ok, reason := srv.checkPeer(id); !ok {
return false, reason
}
srv.peers[id] = p
return true, 0
}
func (srv *Server) checkPeer(id discover.NodeID) (bool, DiscReason) {
switch {
case !srv.running:
return false, DiscQuitting
case len(srv.peers) >= srv.MaxPeers:
return false, DiscTooManyPeers
case srv.peers[id] != nil:
return false, DiscAlreadyConnected
case id == srv.Self().ID:
return false, DiscSelf
default:
return true, 0
}
}
func (srv *Server) removePeer(p *Peer) {
srv.lock.Lock()
delete(srv.peers, p.ID())
srv.lock.Unlock()
srv.peerWG.Done()
}
