From 8da42b12f4461f646378a32a5d910cdaa0069821 Mon Sep 17 00:00:00 2001 From: Amir Bandeali Date: Thu, 28 Jun 2018 18:27:53 -0700 Subject: Remove transferFrom, implement in fallback function --- .../current/protocol/AssetProxy/ERC20Proxy.sol | 201 ++++++------- .../current/protocol/AssetProxy/ERC721Proxy.sol | 325 +++++++++++---------- .../protocol/AssetProxy/interfaces/IAssetData.sol | 12 +- .../protocol/AssetProxy/interfaces/IAssetProxy.sol | 2 +- .../Exchange/MixinAssetProxyDispatcher.sol | 3 +- .../current/tokens/ERC721Token/ERC721Token.sol | 14 +- 6 files changed, 267 insertions(+), 290 deletions(-) (limited to 'packages') diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC20Proxy.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC20Proxy.sol index b4780b52b..aed62f54f 100644 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC20Proxy.sol +++ b/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC20Proxy.sol @@ -20,138 +20,103 @@ pragma solidity ^0.4.24; pragma experimental ABIEncoderV2; import "../../utils/LibBytes/LibBytes.sol"; -import "./interfaces/IAssetProxy.sol"; import "./MixinAuthorizable.sol"; contract ERC20Proxy is - IAssetProxy, MixinAuthorizable { // Id of this proxy. bytes4 constant PROXY_ID = bytes4(keccak256("ERC20Token(address)")); - /// @dev Internal version of `transferFrom`. - /// @param assetData Encoded byte array. - /// @param from Address to transfer asset from. - /// @param to Address to transfer asset to. - /// @param amount Amount of asset to transfer. - function transferFrom( - bytes assetData, - address from, - address to, - uint256 amount - ) + function () external { - require( - authorized[msg.sender], - "SENDER_NOT_AUTHORIZED" - ); - - // `transferFrom`. - // The function is marked `external`, so no abi decodeding is done for - // us. Instead, we expect the `calldata` memory to contain the - // following: - // - // | Area | Offset | Length | Contents | - // |----------|--------|---------|-------------------------------------| - // | Header | 0 | 4 | function selector | - // | Params | | 4 * 32 | function parameters: | - // | | 4 | | 1. offset to assetData (*) | - // | | 36 | | 2. from | - // | | 68 | | 3. to | - // | | 100 | | 4. amount | - // | Data | | | assetData: | - // | | 132 | 32 | assetData Length | - // | | 164 | ** | assetData Contents | - // - // (*): offset is computed from start of function parameters, so offset - // by an additional 4 bytes in the calldata. - // - // WARNING: The ABIv2 specification allows additional padding between - // the Params and Data section. This will result in a larger - // offset to assetData. - - // Asset data itself is encoded as follows: - // - // | Area | Offset | Length | Contents | - // |----------|--------|---------|-------------------------------------| - // | Header | 0 | 4 | function selector | - // | Params | | 1 * 32 | function parameters: | - // | | 4 | 12 + 20 | 1. token address | - - // Transfer tokens. - // We do a raw call so we can check the success separate - // from the return data. - // We construct calldata for the `token.transferFrom` ABI. - // The layout of this calldata is in the table below. - // - // | Area | Offset | Length | Contents | - // |----------|--------|---------|-------------------------------------| - // | Header | 0 | 4 | function selector | - // | Params | | 3 * 32 | function parameters: | - // | | 4 | | 1. from | - // | | 36 | | 2. to | - // | | 68 | | 3. amount | - assembly { - /////// Token contract address /////// - // The token address is found as follows: - // * It is stored at offset 4 in `assetData` contents. - // * This is stored at offset 32 from `assetData`. - // * The offset to `assetData` from Params is stored at offset - // 4 in calldata. - // * The offset of Params in calldata is 4. - // So we read location 4 and add 32 + 4 + 4 to it. - let token := calldataload(add(calldataload(4), 40)) - - /////// Setup Header Area /////// - // This area holds the 4-byte `transferFrom` selector. - // Any trailing data in transferFromSelector will be - // overwritten in the next `mstore` call. - mstore(0, 0x23b872dd00000000000000000000000000000000000000000000000000000000) - - /////// Setup Params Area /////// - // We copy the fields `from`, `to` and `amount` in bulk - // from our own calldata to the new calldata. - calldatacopy(4, 36, 96) + // The first 4 bytes of calldata holds the function selector + let selector := and(calldataload(0), 0xffffffff00000000000000000000000000000000000000000000000000000000) + + // `transferFrom` will be called with the following parameters: + // assetData Encoded byte array. + // from Address to transfer asset from. + // to Address to transfer asset to. + // amount Amount of asset to transfer. + // bytes4(keccak256("transferFrom(bytes,address,address,uint256)")) = 0xa85e59e4 + if eq(selector, 0xa85e59e400000000000000000000000000000000000000000000000000000000) { - /////// Call `token.transferFrom` using the calldata /////// - let success := call( - gas, // forward all gas - token, // call address of token contract - 0, // don't send any ETH - 0, // pointer to start of input - 100, // length of input - 0, // write output over input - 32 // output size should be 32 bytes - ) + // To lookup a value in a mapping, we load from the storage location keccak256(k, p), + // where k is the key left padded to 32 bytes and p is the storage slot + let start := mload(64) + mstore(start, and(caller, 0xffffffffffffffffffffffffffffffffffffffff)) + mstore(add(start, 32), authorized_slot) - /////// Check return data. /////// - // If there is no return data, we assume the token incorrectly - // does not return a bool. In this case we expect it to revert - // on failure, which was handled above. - // If the token does return data, we require that it is a single - // nonzero 32 bytes value. - // So the transfer succeeded if the call succeeded and either - // returned nothing, or returned a non-zero 32 byte value. - success := and(success, or( - iszero(returndatasize), - and( - eq(returndatasize, 32), - gt(mload(0), 0) + // Revert if authorized[msg.sender] == false + if iszero(sload(keccak256(start, 64))) { + // Revert with `Error("SENDER_NOT_AUTHORIZED")` + mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) + mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) + mstore(64, 0x0000001553454e4445525f4e4f545f415554484f52495a454400000000000000) + mstore(96, 0) + revert(0, 100) + } + + /////// Token contract address /////// + // The token address is found as follows: + // * It is stored at offset 4 in `assetData` contents. + // * This is stored at offset 32 from `assetData`. + // * The offset to `assetData` from Params is stored at offset + // 4 in calldata. + // * The offset of Params in calldata is 4. + // So we read location 4 and add 32 + 4 + 4 to it. + let token := calldataload(add(calldataload(4), 40)) + + /////// Setup Header Area /////// + // This area holds the 4-byte `transferFrom` selector. + // Any trailing data in transferFromSelector will be + // overwritten in the next `mstore` call. + mstore(0, 0x23b872dd00000000000000000000000000000000000000000000000000000000) + + /////// Setup Params Area /////// + // We copy the fields `from`, `to` and `amount` in bulk + // from our own calldata to the new calldata. + calldatacopy(4, 36, 96) + + /////// Call `token.transferFrom` using the calldata /////// + let success := call( + gas, // forward all gas + token, // call address of token contract + 0, // don't send any ETH + 0, // pointer to start of input + 100, // length of input + 0, // write output over input + 32 // output size should be 32 bytes ) - )) - if success { - return(0, 0) + + /////// Check return data. /////// + // If there is no return data, we assume the token incorrectly + // does not return a bool. In this case we expect it to revert + // on failure, which was handled above. + // If the token does return data, we require that it is a single + // nonzero 32 bytes value. + // So the transfer succeeded if the call succeeded and either + // returned nothing, or returned a non-zero 32 byte value. + success := and(success, or( + iszero(returndatasize), + and( + eq(returndatasize, 32), + gt(mload(0), 0) + ) + )) + if success { + return(0, 0) + } + + // Revert with `Error("TRANSFER_FAILED")` + mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) + mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) + mstore(64, 0x0000000f5452414e534645525f4641494c454400000000000000000000000000) + mstore(96, 0) + revert(0, 100) } - - // Revert with `Error("TRANSFER_FAILED")` - mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) - mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) - mstore(64, 0x0000000f5452414e534645525f4641494c454400000000000000000000000000) - mstore(96, 0) - revert(0, 100) } } @@ -159,7 +124,7 @@ contract ERC20Proxy is /// @return Proxy id. function getProxyId() external - view + pure returns (bytes4) { return PROXY_ID; diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC721Proxy.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC721Proxy.sol index 8d7cea717..b73dc36cc 100644 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC721Proxy.sol +++ b/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC721Proxy.sol @@ -20,178 +20,189 @@ pragma solidity ^0.4.24; pragma experimental ABIEncoderV2; import "../../utils/LibBytes/LibBytes.sol"; -import "./interfaces/IAssetProxy.sol"; import "./MixinAuthorizable.sol"; contract ERC721Proxy is - IAssetProxy, MixinAuthorizable { // Id of this proxy. bytes4 constant PROXY_ID = bytes4(keccak256("ERC721Token(address,uint256,bytes)")); - /// @dev Internal version of `transferFrom`. - /// @param assetData Encoded byte array. - /// @param from Address to transfer asset from. - /// @param to Address to transfer asset to. - /// @param amount Amount of asset to transfer. - function transferFrom( - bytes assetData, - address from, - address to, - uint256 amount - ) + function () external { - require( - authorized[msg.sender], - "SENDER_NOT_AUTHORIZED" - ); - - // `transferFrom`. - // The function is marked `external`, so no abi decodeding is done for - // us. Instead, we expect the `calldata` memory to contain the - // following: - // - // | Area | Offset | Length | Contents | - // |----------|--------|---------|-------------------------------------| - // | Header | 0 | 4 | function selector | - // | Params | | 4 * 32 | function parameters: | - // | | 4 | | 1. offset to assetData (*) | - // | | 36 | | 2. from | - // | | 68 | | 3. to | - // | | 100 | | 4. amount | - // | Data | | | assetData: | - // | | 132 | 32 | assetData Length | - // | | 164 | ** | assetData Contents | - // - // (*): offset is computed from start of function parameters, so offset - // by an additional 4 bytes in the calldata. - // - // WARNING: The ABIv2 specification allows additional padding between - // the Params and Data section. This will result in a larger - // offset to assetData. - - // Asset data itself is encoded as follows: - // - // | Area | Offset | Length | Contents | - // |----------|--------|---------|-------------------------------------| - // | Header | 0 | 4 | function selector | - // | Params | | 3 * 32 | function parameters: | - // | | 4 | 12 + 20 | 1. token address | - // | | 36 | | 2. tokenId | - // | | 68 | | 3. offset to receiverData (*) | - // | Data | | | receiverData: | - // | | 100 | 32 | receiverData Length | - // | | 132 | ** | receiverData Contents | - - // We construct calldata for the `token.safeTransferFrom` ABI. - // The layout of this calldata is in the table below. - // - // | Area | Offset | Length | Contents | - // |----------|--------|---------|-------------------------------------| - // | Header | 0 | 4 | function selector | - // | Params | | 4 * 32 | function parameters: | - // | | 4 | | 1. from | - // | | 36 | | 2. to | - // | | 68 | | 3. tokenId | - // | | 100 | | 4. offset to receiverData (*) | - // | Data | | | receiverData: | - // | | 132 | 32 | receiverData Length | - // | | 164 | ** | receiverData Contents | - assembly { - // There exists only 1 of each token. - // require(amount == 1, "INVALID_AMOUNT") - if sub(calldataload(100), 1) { - // Revert with `Error("INVALID_AMOUNT")` + // The first 4 bytes of calldata holds the function selector + let selector := and(calldataload(0), 0xffffffff00000000000000000000000000000000000000000000000000000000) + + // `transferFrom` will be called with the following parameters: + // assetData Encoded byte array. + // from Address to transfer asset from. + // to Address to transfer asset to. + // amount Amount of asset to transfer. + // bytes4(keccak256("transferFrom(bytes,address,address,uint256)")) = 0xa85e59e4 + if eq(selector, 0xa85e59e400000000000000000000000000000000000000000000000000000000) { + + // To lookup a value in a mapping, we load from the storage location keccak256(k, p), + // where k is the key left padded to 32 bytes and p is the storage slot + let start := mload(64) + mstore(start, and(caller, 0xffffffffffffffffffffffffffffffffffffffff)) + mstore(add(start, 32), authorized_slot) + + // Revert if authorized[msg.sender] == false + if iszero(sload(keccak256(start, 64))) { + // Revert with `Error("SENDER_NOT_AUTHORIZED")` + mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) + mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) + mstore(64, 0x0000001553454e4445525f4e4f545f415554484f52495a454400000000000000) + mstore(96, 0) + revert(0, 100) + } + + // `transferFrom`. + // The function is marked `external`, so no abi decodeding is done for + // us. Instead, we expect the `calldata` memory to contain the + // following: + // + // | Area | Offset | Length | Contents | + // |----------|--------|---------|-------------------------------------| + // | Header | 0 | 4 | function selector | + // | Params | | 4 * 32 | function parameters: | + // | | 4 | | 1. offset to assetData (*) | + // | | 36 | | 2. from | + // | | 68 | | 3. to | + // | | 100 | | 4. amount | + // | Data | | | assetData: | + // | | 132 | 32 | assetData Length | + // | | 164 | ** | assetData Contents | + // + // (*): offset is computed from start of function parameters, so offset + // by an additional 4 bytes in the calldata. + // + // WARNING: The ABIv2 specification allows additional padding between + // the Params and Data section. This will result in a larger + // offset to assetData. + + // Asset data itself is encoded as follows: + // + // | Area | Offset | Length | Contents | + // |----------|--------|---------|-------------------------------------| + // | Header | 0 | 4 | function selector | + // | Params | | 3 * 32 | function parameters: | + // | | 4 | 12 + 20 | 1. token address | + // | | 36 | | 2. tokenId | + // | | 68 | | 3. offset to receiverData (*) | + // | Data | | | receiverData: | + // | | 100 | 32 | receiverData Length | + // | | 132 | ** | receiverData Contents | + + // We construct calldata for the `token.safeTransferFrom` ABI. + // The layout of this calldata is in the table below. + // + // | Area | Offset | Length | Contents | + // |----------|--------|---------|-------------------------------------| + // | Header | 0 | 4 | function selector | + // | Params | | 4 * 32 | function parameters: | + // | | 4 | | 1. from | + // | | 36 | | 2. to | + // | | 68 | | 3. tokenId | + // | | 100 | | 4. offset to receiverData (*) | + // | Data | | | receiverData: | + // | | 132 | 32 | receiverData Length | + // | | 164 | ** | receiverData Contents | + + // There exists only 1 of each token. + // require(amount == 1, "INVALID_AMOUNT") + if sub(calldataload(100), 1) { + // Revert with `Error("INVALID_AMOUNT")` + mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) + mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) + mstore(64, 0x0000000e494e56414c49445f414d4f554e540000000000000000000000000000) + mstore(96, 0) + revert(0, 100) + } + + // Require assetData to be at least 132 bytes + let offset := calldataload(4) + if lt(calldataload(add(offset, 4)), 132) { + // Revert with `Error("LENGTH_GREATER_THAN_131_REQUIRED")` + mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) + mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) + mstore(64, 0x000000204c454e4754485f475245415445525f5448414e5f3133315f52455155) + mstore(96, 0x4952454400000000000000000000000000000000000000000000000000000000) + revert(0, 100) + } + + /////// Setup State /////// + // `cdStart` is the start of the calldata for + // `token.safeTransferFrom` (equal to free memory ptr). + let cdStart := mload(64) + // `dataAreaLength` is the total number of words + // needed to store `receiverData` + // As-per the ABI spec, this value is padded up to + // the nearest multiple of 32, + // and includes 32-bytes for length. + // It's calculated as folows: + // - Unpadded length in bytes = `mload(receiverData) + 32` + // - Add 31 to convert rounding down to rounding up. + // Combined with the previous and this is `63`. + // - Round down to nearest multiple of 32 by clearing + // bits 0x1F. This is done with `and` and a mask. + + /////// Setup Header Area /////// + // This area holds the 4-byte `transferFromSelector`. + // Any trailing data in transferFromSelector will be + // overwritten in the next `mstore` call. + mstore(cdStart, 0xb88d4fde00000000000000000000000000000000000000000000000000000000) + + /////// Setup Params Area /////// + // Each parameter is padded to 32-bytes. + // The entire Params Area is 128 bytes. + // Notes: + // 1. A 20-byte mask is applied to addresses + // to zero-out the unused bytes. + // 2. The offset to `receiverData` is the length + // of the Params Area (128 bytes). + + let length := calldataload(add(offset, 136)) + let token := calldataload(add(offset, 40)) + + // Round length up to multiple of 32 + length := and(add(length, 31), 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0) + + // Copy `from` and `to` + calldatacopy(add(cdStart, 4), 36, 64) + + // TokenId + mstore(add(cdStart, 68), calldataload(add(offset, 72))) + + // Offset to receiverData + mstore(add(cdStart, 100), 128) + + // receiverData (including length) + calldatacopy(add(cdStart, 132), add(offset, 136), add(length, 32)) + + /////// Call `token.safeTransferFrom` using the calldata /////// + let success := call( + gas, // forward all gas + token, // call address of token contract + 0, // don't send any ETH + cdStart, // pointer to start of input + add(length, 164), // length of input + 0, // write output to null + 0 // output size is 0 bytes + ) + if success { + return(0, 0) + } + + // Revert with `Error("TRANSFER_FAILED")` mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) - mstore(64, 0x0000000e494e56414c49445f414d4f554e540000000000000000000000000000) + mstore(64, 0x0000000f5452414e534645525f4641494c454400000000000000000000000000) mstore(96, 0) revert(0, 100) } - - // Require assetData to be at least 132 bytes - let offset := calldataload(4) - if lt(calldataload(add(offset, 4)), 132) { - // Revert with `Error("LENGTH_GREATER_THAN_131_REQUIRED")` - mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) - mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) - mstore(64, 0x000000204c454e4754485f475245415445525f5448414e5f3133315f52455155) - mstore(96, 0x4952454400000000000000000000000000000000000000000000000000000000) - revert(0, 100) - } - - /////// Setup State /////// - // `cdStart` is the start of the calldata for - // `token.safeTransferFrom` (equal to free memory ptr). - let cdStart := mload(64) - // `dataAreaLength` is the total number of words - // needed to store `receiverData` - // As-per the ABI spec, this value is padded up to - // the nearest multiple of 32, - // and includes 32-bytes for length. - // It's calculated as folows: - // - Unpadded length in bytes = `mload(receiverData) + 32` - // - Add 31 to convert rounding down to rounding up. - // Combined with the previous and this is `63`. - // - Round down to nearest multiple of 32 by clearing - // bits 0x1F. This is done with `and` and a mask. - - /////// Setup Header Area /////// - // This area holds the 4-byte `transferFromSelector`. - // Any trailing data in transferFromSelector will be - // overwritten in the next `mstore` call. - mstore(cdStart, 0xb88d4fde00000000000000000000000000000000000000000000000000000000) - - /////// Setup Params Area /////// - // Each parameter is padded to 32-bytes. - // The entire Params Area is 128 bytes. - // Notes: - // 1. A 20-byte mask is applied to addresses - // to zero-out the unused bytes. - // 2. The offset to `receiverData` is the length - // of the Params Area (128 bytes). - - let length := calldataload(add(offset, 136)) - let token := calldataload(add(offset, 40)) - - // Round length up to multiple of 32 - length := and(add(length, 31), 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0) - - // Copy `from` and `to` - calldatacopy(add(cdStart, 4), 36, 64) - - // TokenId - mstore(add(cdStart, 68), calldataload(add(offset, 72))) - - // Offset to receiverData - mstore(add(cdStart, 100), 128) - - // receiverData (including length) - calldatacopy(add(cdStart, 132), add(offset, 136), add(length, 32)) - - /////// Call `token.safeTransferFrom` using the calldata /////// - let success := call( - gas, // forward all gas - token, // call address of token contract - 0, // don't send any ETH - cdStart, // pointer to start of input - add(length, 164), // length of input - 0, // write output to null - 0 // output size is 0 bytes - ) - if success { - return(0, 0) - } - - // Revert with `Error("TRANSFER_FAILED")` - mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) - mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) - mstore(64, 0x0000000f5452414e534645525f4641494c454400000000000000000000000000) - mstore(96, 0) - revert(0, 100) } } @@ -199,7 +210,7 @@ contract ERC721Proxy is /// @return Proxy id. function getProxyId() external - view + pure returns (bytes4) { return PROXY_ID; diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetData.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetData.sol index 8c78ee8c4..7ebd6acf0 100644 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetData.sol +++ b/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetData.sol @@ -23,14 +23,16 @@ pragma solidity ^0.4.23; // This argument is ABI encoded as one of the methods of this interface. interface IAssetData { - function ERC20Token( - address tokenContract) - external pure; + function ERC20Token(address tokenContract) + external + pure; function ERC721Token( address tokenContract, uint256 tokenId, - bytes receiverData) - external pure; + bytes receiverData + ) + external + pure; } diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetProxy.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetProxy.sol index ae8e195da..eacd5a412 100644 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetProxy.sol +++ b/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetProxy.sol @@ -42,6 +42,6 @@ contract IAssetProxy is /// @return Proxy id. function getProxyId() external - view + pure returns (bytes4); } diff --git a/packages/contracts/src/contracts/current/protocol/Exchange/MixinAssetProxyDispatcher.sol b/packages/contracts/src/contracts/current/protocol/Exchange/MixinAssetProxyDispatcher.sol index f7086f543..643ccef81 100644 --- a/packages/contracts/src/contracts/current/protocol/Exchange/MixinAssetProxyDispatcher.sol +++ b/packages/contracts/src/contracts/current/protocol/Exchange/MixinAssetProxyDispatcher.sol @@ -135,7 +135,6 @@ contract MixinAssetProxyDispatcher is // | | 132 | 32 | assetData Length | // | | 164 | ** | assetData Contents | - bool success; assembly { /////// Setup State /////// // `cdStart` is the start of the calldata for `assetProxy.transferFrom` (equal to free memory ptr). @@ -173,7 +172,7 @@ contract MixinAssetProxyDispatcher is } /////// Call `assetProxy.transferFrom` using the constructed calldata /////// - success := call( + let success := call( gas, // forward all gas assetProxy, // call address of asset proxy 0, // don't send any ETH diff --git a/packages/contracts/src/contracts/current/tokens/ERC721Token/ERC721Token.sol b/packages/contracts/src/contracts/current/tokens/ERC721Token/ERC721Token.sol index 41ba149e3..cff34e99e 100644 --- a/packages/contracts/src/contracts/current/tokens/ERC721Token/ERC721Token.sol +++ b/packages/contracts/src/contracts/current/tokens/ERC721Token/ERC721Token.sol @@ -68,7 +68,7 @@ contract ERC721Token is * @param _tokenId uint256 ID of the token to validate */ modifier canTransfer(uint256 _tokenId) { - require(isApprovedOrOwner(msg.sender, _tokenId)); + require(isApprovedOrOwner(msg.sender, _tokenId), "3"); _; } @@ -222,8 +222,8 @@ contract ERC721Token is public canTransfer(_tokenId) { - require(_from != address(0)); - require(_to != address(0)); + require(_from != address(0), "1"); + require(_to != address(0), "2"); clearApproval(_from, _tokenId); removeTokenFrom(_from, _tokenId); @@ -276,7 +276,7 @@ contract ERC721Token is { transferFrom(_from, _to, _tokenId); // solium-disable-next-line arg-overflow - require(checkAndCallSafeTransfer(_from, _to, _tokenId, _data)); + require(checkAndCallSafeTransfer(_from, _to, _tokenId, _data), "7"); } /** @@ -331,7 +331,7 @@ contract ERC721Token is function clearApproval(address _owner, uint256 _tokenId) internal { - require(ownerOf(_tokenId) == _owner); + require(ownerOf(_tokenId) == _owner, "4"); if (tokenApprovals[_tokenId] != address(0)) { tokenApprovals[_tokenId] = address(0); emit Approval(_owner, address(0), _tokenId); @@ -346,7 +346,7 @@ contract ERC721Token is function addTokenTo(address _to, uint256 _tokenId) internal { - require(tokenOwner[_tokenId] == address(0)); + require(tokenOwner[_tokenId] == address(0), "6"); tokenOwner[_tokenId] = _to; ownedTokensCount[_to] = safeAdd(ownedTokensCount[_to], 1); } @@ -359,7 +359,7 @@ contract ERC721Token is function removeTokenFrom(address _from, uint256 _tokenId) internal { - require(ownerOf(_tokenId) == _from); + require(ownerOf(_tokenId) == _from, "5"); ownedTokensCount[_from] = safeSub(ownedTokensCount[_from], 1); tokenOwner[_tokenId] = address(0); } -- cgit v1.2.3