diff options
Diffstat (limited to 'packages/contracts/src')
12 files changed, 312 insertions, 517 deletions
diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC20Proxy.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC20Proxy.sol index b74d2c231..b4780b52b 100644 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC20Proxy.sol +++ b/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC20Proxy.sol @@ -20,17 +20,140 @@ pragma solidity ^0.4.24; pragma experimental ABIEncoderV2; import "../../utils/LibBytes/LibBytes.sol"; -import "./MixinAssetProxy.sol"; +import "./interfaces/IAssetProxy.sol"; import "./MixinAuthorizable.sol"; -import "./MixinERC20Transfer.sol"; contract ERC20Proxy is - MixinAssetProxy, - MixinAuthorizable, - MixinERC20Transfer + IAssetProxy, + MixinAuthorizable { // Id of this proxy. bytes4 constant PROXY_ID = bytes4(keccak256("ERC20Token(address)")); + + /// @dev Internal version of `transferFrom`. + /// @param assetData Encoded byte array. + /// @param from Address to transfer asset from. + /// @param to Address to transfer asset to. + /// @param amount Amount of asset to transfer. + function transferFrom( + bytes assetData, + address from, + address to, + uint256 amount + ) + external + { + require( + authorized[msg.sender], + "SENDER_NOT_AUTHORIZED" + ); + + // `transferFrom`. + // The function is marked `external`, so no abi decodeding is done for + // us. Instead, we expect the `calldata` memory to contain the + // following: + // + // | Area | Offset | Length | Contents | + // |----------|--------|---------|-------------------------------------| + // | Header | 0 | 4 | function selector | + // | Params | | 4 * 32 | function parameters: | + // | | 4 | | 1. offset to assetData (*) | + // | | 36 | | 2. from | + // | | 68 | | 3. to | + // | | 100 | | 4. amount | + // | Data | | | assetData: | + // | | 132 | 32 | assetData Length | + // | | 164 | ** | assetData Contents | + // + // (*): offset is computed from start of function parameters, so offset + // by an additional 4 bytes in the calldata. + // + // WARNING: The ABIv2 specification allows additional padding between + // the Params and Data section. This will result in a larger + // offset to assetData. + + // Asset data itself is encoded as follows: + // + // | Area | Offset | Length | Contents | + // |----------|--------|---------|-------------------------------------| + // | Header | 0 | 4 | function selector | + // | Params | | 1 * 32 | function parameters: | + // | | 4 | 12 + 20 | 1. token address | + + // Transfer tokens. + // We do a raw call so we can check the success separate + // from the return data. + // We construct calldata for the `token.transferFrom` ABI. + // The layout of this calldata is in the table below. + // + // | Area | Offset | Length | Contents | + // |----------|--------|---------|-------------------------------------| + // | Header | 0 | 4 | function selector | + // | Params | | 3 * 32 | function parameters: | + // | | 4 | | 1. from | + // | | 36 | | 2. to | + // | | 68 | | 3. amount | + + assembly { + /////// Token contract address /////// + // The token address is found as follows: + // * It is stored at offset 4 in `assetData` contents. + // * This is stored at offset 32 from `assetData`. + // * The offset to `assetData` from Params is stored at offset + // 4 in calldata. + // * The offset of Params in calldata is 4. + // So we read location 4 and add 32 + 4 + 4 to it. + let token := calldataload(add(calldataload(4), 40)) + + /////// Setup Header Area /////// + // This area holds the 4-byte `transferFrom` selector. + // Any trailing data in transferFromSelector will be + // overwritten in the next `mstore` call. + mstore(0, 0x23b872dd00000000000000000000000000000000000000000000000000000000) + + /////// Setup Params Area /////// + // We copy the fields `from`, `to` and `amount` in bulk + // from our own calldata to the new calldata. + calldatacopy(4, 36, 96) + + /////// Call `token.transferFrom` using the calldata /////// + let success := call( + gas, // forward all gas + token, // call address of token contract + 0, // don't send any ETH + 0, // pointer to start of input + 100, // length of input + 0, // write output over input + 32 // output size should be 32 bytes + ) + + /////// Check return data. /////// + // If there is no return data, we assume the token incorrectly + // does not return a bool. In this case we expect it to revert + // on failure, which was handled above. + // If the token does return data, we require that it is a single + // nonzero 32 bytes value. + // So the transfer succeeded if the call succeeded and either + // returned nothing, or returned a non-zero 32 byte value. + success := and(success, or( + iszero(returndatasize), + and( + eq(returndatasize, 32), + gt(mload(0), 0) + ) + )) + if success { + return(0, 0) + } + + // Revert with `Error("TRANSFER_FAILED")` + mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) + mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) + mstore(64, 0x0000000f5452414e534645525f4641494c454400000000000000000000000000) + mstore(96, 0) + revert(0, 100) + } + } /// @dev Gets the proxy id associated with the proxy address. /// @return Proxy id. diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC721Proxy.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC721Proxy.sol index f6293f97d..8d7cea717 100644 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC721Proxy.sol +++ b/packages/contracts/src/contracts/current/protocol/AssetProxy/ERC721Proxy.sol @@ -20,18 +20,181 @@ pragma solidity ^0.4.24; pragma experimental ABIEncoderV2; import "../../utils/LibBytes/LibBytes.sol"; -import "./MixinAssetProxy.sol"; +import "./interfaces/IAssetProxy.sol"; import "./MixinAuthorizable.sol"; -import "./MixinERC721Transfer.sol"; contract ERC721Proxy is - MixinAssetProxy, - MixinAuthorizable, - MixinERC721Transfer + IAssetProxy, + MixinAuthorizable { // Id of this proxy. bytes4 constant PROXY_ID = bytes4(keccak256("ERC721Token(address,uint256,bytes)")); + /// @dev Internal version of `transferFrom`. + /// @param assetData Encoded byte array. + /// @param from Address to transfer asset from. + /// @param to Address to transfer asset to. + /// @param amount Amount of asset to transfer. + function transferFrom( + bytes assetData, + address from, + address to, + uint256 amount + ) + external + { + require( + authorized[msg.sender], + "SENDER_NOT_AUTHORIZED" + ); + + // `transferFrom`. + // The function is marked `external`, so no abi decodeding is done for + // us. Instead, we expect the `calldata` memory to contain the + // following: + // + // | Area | Offset | Length | Contents | + // |----------|--------|---------|-------------------------------------| + // | Header | 0 | 4 | function selector | + // | Params | | 4 * 32 | function parameters: | + // | | 4 | | 1. offset to assetData (*) | + // | | 36 | | 2. from | + // | | 68 | | 3. to | + // | | 100 | | 4. amount | + // | Data | | | assetData: | + // | | 132 | 32 | assetData Length | + // | | 164 | ** | assetData Contents | + // + // (*): offset is computed from start of function parameters, so offset + // by an additional 4 bytes in the calldata. + // + // WARNING: The ABIv2 specification allows additional padding between + // the Params and Data section. This will result in a larger + // offset to assetData. + + // Asset data itself is encoded as follows: + // + // | Area | Offset | Length | Contents | + // |----------|--------|---------|-------------------------------------| + // | Header | 0 | 4 | function selector | + // | Params | | 3 * 32 | function parameters: | + // | | 4 | 12 + 20 | 1. token address | + // | | 36 | | 2. tokenId | + // | | 68 | | 3. offset to receiverData (*) | + // | Data | | | receiverData: | + // | | 100 | 32 | receiverData Length | + // | | 132 | ** | receiverData Contents | + + // We construct calldata for the `token.safeTransferFrom` ABI. + // The layout of this calldata is in the table below. + // + // | Area | Offset | Length | Contents | + // |----------|--------|---------|-------------------------------------| + // | Header | 0 | 4 | function selector | + // | Params | | 4 * 32 | function parameters: | + // | | 4 | | 1. from | + // | | 36 | | 2. to | + // | | 68 | | 3. tokenId | + // | | 100 | | 4. offset to receiverData (*) | + // | Data | | | receiverData: | + // | | 132 | 32 | receiverData Length | + // | | 164 | ** | receiverData Contents | + + assembly { + // There exists only 1 of each token. + // require(amount == 1, "INVALID_AMOUNT") + if sub(calldataload(100), 1) { + // Revert with `Error("INVALID_AMOUNT")` + mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) + mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) + mstore(64, 0x0000000e494e56414c49445f414d4f554e540000000000000000000000000000) + mstore(96, 0) + revert(0, 100) + } + + // Require assetData to be at least 132 bytes + let offset := calldataload(4) + if lt(calldataload(add(offset, 4)), 132) { + // Revert with `Error("LENGTH_GREATER_THAN_131_REQUIRED")` + mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) + mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) + mstore(64, 0x000000204c454e4754485f475245415445525f5448414e5f3133315f52455155) + mstore(96, 0x4952454400000000000000000000000000000000000000000000000000000000) + revert(0, 100) + } + + /////// Setup State /////// + // `cdStart` is the start of the calldata for + // `token.safeTransferFrom` (equal to free memory ptr). + let cdStart := mload(64) + // `dataAreaLength` is the total number of words + // needed to store `receiverData` + // As-per the ABI spec, this value is padded up to + // the nearest multiple of 32, + // and includes 32-bytes for length. + // It's calculated as folows: + // - Unpadded length in bytes = `mload(receiverData) + 32` + // - Add 31 to convert rounding down to rounding up. + // Combined with the previous and this is `63`. + // - Round down to nearest multiple of 32 by clearing + // bits 0x1F. This is done with `and` and a mask. + + /////// Setup Header Area /////// + // This area holds the 4-byte `transferFromSelector`. + // Any trailing data in transferFromSelector will be + // overwritten in the next `mstore` call. + mstore(cdStart, 0xb88d4fde00000000000000000000000000000000000000000000000000000000) + + /////// Setup Params Area /////// + // Each parameter is padded to 32-bytes. + // The entire Params Area is 128 bytes. + // Notes: + // 1. A 20-byte mask is applied to addresses + // to zero-out the unused bytes. + // 2. The offset to `receiverData` is the length + // of the Params Area (128 bytes). + + let length := calldataload(add(offset, 136)) + let token := calldataload(add(offset, 40)) + + // Round length up to multiple of 32 + length := and(add(length, 31), 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0) + + // Copy `from` and `to` + calldatacopy(add(cdStart, 4), 36, 64) + + // TokenId + mstore(add(cdStart, 68), calldataload(add(offset, 72))) + + // Offset to receiverData + mstore(add(cdStart, 100), 128) + + // receiverData (including length) + calldatacopy(add(cdStart, 132), add(offset, 136), add(length, 32)) + + /////// Call `token.safeTransferFrom` using the calldata /////// + let success := call( + gas, // forward all gas + token, // call address of token contract + 0, // don't send any ETH + cdStart, // pointer to start of input + add(length, 164), // length of input + 0, // write output to null + 0 // output size is 0 bytes + ) + if success { + return(0, 0) + } + + // Revert with `Error("TRANSFER_FAILED")` + mstore(0, 0x08c379a000000000000000000000000000000000000000000000000000000000) + mstore(32, 0x0000002000000000000000000000000000000000000000000000000000000000) + mstore(64, 0x0000000f5452414e534645525f4641494c454400000000000000000000000000) + mstore(96, 0) + revert(0, 100) + } + } + /// @dev Gets the proxy id associated with the proxy address. /// @return Proxy id. function getProxyId() diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/MixinAssetProxy.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/MixinAssetProxy.sol deleted file mode 100644 index 9032658e7..000000000 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/MixinAssetProxy.sol +++ /dev/null @@ -1,75 +0,0 @@ -/* - - Copyright 2018 ZeroEx Intl. - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - -*/ - -pragma solidity ^0.4.24; -pragma experimental ABIEncoderV2; - -import "./mixins/MAuthorizable.sol"; -import "./mixins/MAssetProxy.sol"; - -contract MixinAssetProxy is - MAuthorizable, - MAssetProxy -{ - - /// @dev Transfers assets. Either succeeds or throws. - /// @param assetData Encoded byte array. - /// @param from Address to transfer asset from. - /// @param to Address to transfer asset to. - /// @param amount Amount of asset to transfer. - function transferFrom( - bytes assetData, - address from, - address to, - uint256 amount - ) - external - onlyAuthorized - { - transferFromInternal( - assetData, - from, - to, - amount - ); - } - - /// @dev Makes multiple transfers of assets. Either succeeds or throws. - /// @param assetData Array of byte arrays encoded for the respective asset proxy. - /// @param from Array of addresses to transfer assets from. - /// @param to Array of addresses to transfer assets to. - /// @param amounts Array of amounts of assets to transfer. - function batchTransferFrom( - bytes[] memory assetData, - address[] memory from, - address[] memory to, - uint256[] memory amounts - ) - public - onlyAuthorized - { - for (uint256 i = 0; i < assetData.length; i++) { - transferFromInternal( - assetData[i], - from[i], - to[i], - amounts[i] - ); - } - } -} diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/MixinERC20Transfer.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/MixinERC20Transfer.sol deleted file mode 100644 index a09db43bd..000000000 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/MixinERC20Transfer.sol +++ /dev/null @@ -1,113 +0,0 @@ -/* - - Copyright 2018 ZeroEx Intl. - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - -*/ - -pragma solidity ^0.4.24; -pragma experimental ABIEncoderV2; - -import "../../utils/LibBytes/LibBytes.sol"; -import "../../tokens/ERC20Token/IERC20Token.sol"; - -contract MixinERC20Transfer { - - using LibBytes for bytes; - - /// @dev Internal version of `transferFrom`. - /// @param assetData Encoded byte array. - /// @param from Address to transfer asset from. - /// @param to Address to transfer asset to. - /// @param amount Amount of asset to transfer. - function transferFromInternal( - bytes memory assetData, - address from, - address to, - uint256 amount - ) - internal - { - // Decode asset data. - address token = assetData.readAddress(16); - - // Transfer tokens. - // We do a raw call so we can check the success separate - // from the return data. - // We construct calldata for the `token.transferFrom` ABI. - // The layout of this calldata is in the table below. - // - // | Area | Offset | Length | Contents | - // |----------|--------|---------|-------------------------------------| - // | Header | 0 | 4 | function selector | - // | Params | | 3 * 32 | function parameters: | - // | | 4 | | 1. from | - // | | 36 | | 2. to | - // | | 68 | | 3. amount | - - bytes4 transferFromSelector = IERC20Token(token).transferFrom.selector; - bool success; - assembly { - /////// Setup State /////// - // `cdStart` is the start of the calldata for `token.transferFrom` (equal to free memory ptr). - let cdStart := mload(64) - - /////// Setup Header Area /////// - // This area holds the 4-byte `transferFromSelector`. - // Any trailing data in transferFromSelector will be - // overwritten in the next `mstore` call. - mstore(cdStart, transferFromSelector) - - /////// Setup Params Area /////// - // Each parameter is padded to 32-bytes. - // The entire Params Area is 96 bytes. - // A 20-byte mask is applied to addresses to - // zero-out the unused bytes. - mstore(add(cdStart, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff)) - mstore(add(cdStart, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) - mstore(add(cdStart, 68), amount) - - /////// Call `token.transferFrom` using the calldata /////// - success := call( - gas, // forward all gas - token, // call address of token contract - 0, // don't send any ETH - cdStart, // pointer to start of input - 100, // length of input - cdStart, // write output over input - 32 // output size should be 32 bytes - ) - - /////// Check return data. /////// - // If there is no return data, we assume the token incorrectly - // does not return a bool. In this case we expect it to revert - // on failure, which was handled above. - // If the token does return data, we require that it is a single - // nonzero 32 bytes value. - // So the transfer succeeded if the call succeeded and either - // returned nothing, or returned a non-zero 32 byte value. - success := and(success, or( - iszero(returndatasize), - and( - eq(returndatasize, 32), - gt(mload(cdStart), 0) - ) - )) - } - require( - success, - "TRANSFER_FAILED" - ); - } -} diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/MixinERC721Transfer.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/MixinERC721Transfer.sol deleted file mode 100644 index c170917ea..000000000 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/MixinERC721Transfer.sol +++ /dev/null @@ -1,168 +0,0 @@ -/* - - Copyright 2018 ZeroEx Intl. - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - -*/ - -pragma solidity ^0.4.24; -pragma experimental ABIEncoderV2; - -import "../../utils/LibBytes/LibBytes.sol"; -import "../../tokens/ERC721Token/ERC721Token.sol"; -import "./libs/LibTransferErrors.sol"; - -contract MixinERC721Transfer is - LibTransferErrors -{ - using LibBytes for bytes; - - bytes4 constant SAFE_TRANSFER_FROM_SELECTOR = bytes4(keccak256("safeTransferFrom(address,address,uint256,bytes)")); - - /// @dev Internal version of `transferFrom`. - /// @param assetData Encoded byte array. - /// @param from Address to transfer asset from. - /// @param to Address to transfer asset to. - /// @param amount Amount of asset to transfer. - function transferFromInternal( - bytes memory assetData, - address from, - address to, - uint256 amount - ) - internal - { - // There exists only 1 of each token. - require( - amount == 1, - INVALID_AMOUNT - ); - - // Decode asset data. - ( - address token, - uint256 tokenId, - bytes memory receiverData - ) = decodeERC721AssetData(assetData); - - // We construct calldata for the `token.safeTransferFrom` ABI. - // The layout of this calldata is in the table below. - // - // | Area | Offset | Length | Contents | - // |----------|--------|---------|-------------------------------------| - // | Header | 0 | 4 | function selector | - // | Params | | 4 * 32 | function parameters: | - // | | 4 | | 1. from | - // | | 36 | | 2. to | - // | | 68 | | 3. tokenId | - // | | 100 | | 4. offset to receiverData (*) | - // | Data | | | receiverData: | - // | | 132 | 32 | receiverData Length | - // | | 164 | ** | receiverData Contents | - - bytes4 safeTransferFromSelector = SAFE_TRANSFER_FROM_SELECTOR; - bool success; - assembly { - /////// Setup State /////// - // `cdStart` is the start of the calldata for - // `token.safeTransferFrom` (equal to free memory ptr). - let cdStart := mload(64) - // `dataAreaLength` is the total number of words - // needed to store `receiverData` - // As-per the ABI spec, this value is padded up to - // the nearest multiple of 32, - // and includes 32-bytes for length. - // It's calculated as folows: - // - Unpadded length in bytes = `mload(receiverData) + 32` - // - Add 31 to convert rounding down to rounding up. - // Combined with the previous and this is `63`. - // - Round down to nearest multiple of 32 by clearing - // bits 0x1F. This is done with `and` and a mask. - let dataAreaLength := and(add(mload(receiverData), 63), 0xFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFFE0) - // `cdEnd` is the end of the calldata for `token.safeTransferFrom`. - let cdEnd := add(cdStart, add(132, dataAreaLength)) - - /////// Setup Header Area /////// - // This area holds the 4-byte `transferFromSelector`. - // Any trailing data in transferFromSelector will be - // overwritten in the next `mstore` call. - mstore(cdStart, safeTransferFromSelector) - - /////// Setup Params Area /////// - // Each parameter is padded to 32-bytes. - // The entire Params Area is 128 bytes. - // Notes: - // 1. A 20-byte mask is applied to addresses - // to zero-out the unused bytes. - // 2. The offset to `receiverData` is the length - // of the Params Area (128 bytes). - mstore(add(cdStart, 4), and(from, 0xffffffffffffffffffffffffffffffffffffffff)) - mstore(add(cdStart, 36), and(to, 0xffffffffffffffffffffffffffffffffffffffff)) - mstore(add(cdStart, 68), tokenId) - mstore(add(cdStart, 100), 128) - - /////// Setup Data Area /////// - // This area holds `receiverData`. - let dataArea := add(cdStart, 132) - for {} lt(dataArea, cdEnd) {} { - mstore(dataArea, mload(receiverData)) - dataArea := add(dataArea, 32) - receiverData := add(receiverData, 32) - } - - /////// Call `token.safeTransferFrom` using the calldata /////// - success := call( - gas, // forward all gas - token, // call address of token contract - 0, // don't send any ETH - cdStart, // pointer to start of input - sub(cdEnd, cdStart), // length of input - cdStart, // write output over input - 0 // output size is 0 bytes - ) - } - require( - success, - TRANSFER_FAILED - ); - } - - /// @dev Decodes ERC721 Asset data. - /// @param assetData Encoded byte array. - /// @return proxyId Intended ERC721 proxy id. - /// @return token ERC721 token address. - /// @return tokenId ERC721 token id. - /// @return receiverData Additional data with no specific format, which - /// is passed to the receiving contract's onERC721Received. - function decodeERC721AssetData(bytes memory assetData) - internal - pure - returns ( - address token, - uint256 tokenId, - bytes memory receiverData - ) - { - // Decode asset data. - token = assetData.readAddress(16); - tokenId = assetData.readUint256(36); - receiverData = assetData.readBytesWithLength(100); - - return ( - token, - tokenId, - receiverData - ); - } -} diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetProxy.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetProxy.sol index d12d23610..ae8e195da 100644 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetProxy.sol +++ b/packages/contracts/src/contracts/current/protocol/AssetProxy/interfaces/IAssetProxy.sol @@ -38,19 +38,6 @@ contract IAssetProxy is ) external; - /// @dev Makes multiple transfers of assets. Either succeeds or throws. - /// @param assetData Array of byte arrays encoded for the respective asset proxy. - /// @param from Array of addresses to transfer assets from. - /// @param to Array of addresses to transfer assets to. - /// @param amounts Array of amounts of assets to transfer. - function batchTransferFrom( - bytes[] memory assetData, - address[] memory from, - address[] memory to, - uint256[] memory amounts - ) - public; - /// @dev Gets the proxy id associated with the proxy address. /// @return Proxy id. function getProxyId() diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/libs/LibAssetProxyErrors.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/libs/LibAssetProxyErrors.sol index b0b20c044..338cb12e2 100644 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/libs/LibAssetProxyErrors.sol +++ b/packages/contracts/src/contracts/current/protocol/AssetProxy/libs/LibAssetProxyErrors.sol @@ -23,9 +23,14 @@ pragma solidity ^0.4.24; contract LibAssetProxyErrors { /// Authorizable errors /// - string constant SENDER_NOT_AUTHORIZED = "SENDER_NOT_AUTHORIZED"; // Sender not authorized to call this method. - string constant TARGET_NOT_AUTHORIZED = "TARGET_NOT_AUTHORIZED"; // Target address not authorized to call this method. - string constant TARGET_ALREADY_AUTHORIZED = "TARGET_ALREADY_AUTHORIZED"; // Target address must not already be authorized. - string constant INDEX_OUT_OF_BOUNDS = "INDEX_OUT_OF_BOUNDS"; // Specified array index is out of bounds. - string constant AUTHORIZED_ADDRESS_MISMATCH = "AUTHORIZED_ADDRESS_MISMATCH"; // Address at index does not match given target address. + string constant SENDER_NOT_AUTHORIZED = "SENDER_NOT_AUTHORIZED"; // Sender not authorized to call this method. + string constant TARGET_NOT_AUTHORIZED = "TARGET_NOT_AUTHORIZED"; // Target address not authorized to call this method. + string constant TARGET_ALREADY_AUTHORIZED = "TARGET_ALREADY_AUTHORIZED"; // Target address must not already be authorized. + string constant INDEX_OUT_OF_BOUNDS = "INDEX_OUT_OF_BOUNDS"; // Specified array index is out of bounds. + string constant AUTHORIZED_ADDRESS_MISMATCH = "AUTHORIZED_ADDRESS_MISMATCH"; // Address at index does not match given target address. + + /// Transfer errors /// + string constant INVALID_AMOUNT = "INVALID_AMOUNT"; // Transfer amount must equal 1. + string constant TRANSFER_FAILED = "TRANSFER_FAILED"; // Transfer failed. + string constant LENGTH_GREATER_THAN_131_REQUIRED = "LENGTH_GREATER_THAN_131_REQUIRED"; // Byte array must have a length greater than 0. } diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/libs/LibTransferErrors.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/libs/LibTransferErrors.sol deleted file mode 100644 index 88187f196..000000000 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/libs/LibTransferErrors.sol +++ /dev/null @@ -1,28 +0,0 @@ -/* - - Copyright 2018 ZeroEx Intl. - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - -*/ - -pragma solidity ^0.4.24; - -/// @dev This contract documents the revert reasons used in the `transferFrom` methods of different AssetProxy contracts. -/// This contract is intended to serve as a reference, but is not actually used for efficiency reasons. -contract LibTransferErrors { - - /// Transfer errors /// - string constant INVALID_AMOUNT = "INVALID_AMOUNT"; // Transfer amount must equal 1. - string constant TRANSFER_FAILED = "TRANSFER_FAILED"; // Transfer failed. -} diff --git a/packages/contracts/src/contracts/current/protocol/AssetProxy/mixins/MAssetProxy.sol b/packages/contracts/src/contracts/current/protocol/AssetProxy/mixins/MAssetProxy.sol deleted file mode 100644 index a52cb56f9..000000000 --- a/packages/contracts/src/contracts/current/protocol/AssetProxy/mixins/MAssetProxy.sol +++ /dev/null @@ -1,40 +0,0 @@ -/* - - Copyright 2018 ZeroEx Intl. - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - -*/ - -pragma solidity ^0.4.24; -pragma experimental ABIEncoderV2; - -import "../interfaces/IAssetProxy.sol"; - -contract MAssetProxy is - IAssetProxy -{ - - /// @dev Internal version of `transferFrom`. - /// @param assetData Encoded byte array. - /// @param from Address to transfer asset from. - /// @param to Address to transfer asset to. - /// @param amount Amount of asset to transfer. - function transferFromInternal( - bytes memory assetData, - address from, - address to, - uint256 amount - ) - internal; -} diff --git a/packages/contracts/src/contracts/current/protocol/Exchange/MixinAssetProxyDispatcher.sol b/packages/contracts/src/contracts/current/protocol/Exchange/MixinAssetProxyDispatcher.sol index 3203322aa..f7086f543 100644 --- a/packages/contracts/src/contracts/current/protocol/Exchange/MixinAssetProxyDispatcher.sol +++ b/packages/contracts/src/contracts/current/protocol/Exchange/MixinAssetProxyDispatcher.sol @@ -135,7 +135,6 @@ contract MixinAssetProxyDispatcher is // | | 132 | 32 | assetData Length | // | | 164 | ** | assetData Contents | - bytes4 transferFromSelector = IAssetProxy(assetProxy).transferFrom.selector; bool success; assembly { /////// Setup State /////// @@ -151,7 +150,8 @@ contract MixinAssetProxyDispatcher is /////// Setup Header Area /////// // This area holds the 4-byte `transferFromSelector`. - mstore(cdStart, transferFromSelector) + // bytes4(keccak256("transferFrom(bytes,address,address,uint256)")) = 0xa85e59e4 + mstore(cdStart, 0xa85e59e400000000000000000000000000000000000000000000000000000000) /////// Setup Params Area /////// // Each parameter is padded to 32-bytes. The entire Params Area is 128 bytes. @@ -180,13 +180,12 @@ contract MixinAssetProxyDispatcher is cdStart, // pointer to start of input sub(cdEnd, cdStart), // length of input cdStart, // write output over input - 0 // output size is 0 bytes + 512 // reserve 512 bytes for output ) + if eq(success, 0) { + revert(cdStart, returndatasize()) + } } - require( - success, - "TRANSFER_FAILED" - ); } } } diff --git a/packages/contracts/src/contracts/current/test/TestAssetDataDecoders/TestAssetDataDecoders.sol b/packages/contracts/src/contracts/current/test/TestAssetDataDecoders/TestAssetDataDecoders.sol deleted file mode 100644 index 5987291d2..000000000 --- a/packages/contracts/src/contracts/current/test/TestAssetDataDecoders/TestAssetDataDecoders.sol +++ /dev/null @@ -1,56 +0,0 @@ -/* - - Copyright 2018 ZeroEx Intl. - - Licensed under the Apache License, Version 2.0 (the "License"); - you may not use this file except in compliance with the License. - You may obtain a copy of the License at - - http://www.apache.org/licenses/LICENSE-2.0 - - Unless required by applicable law or agreed to in writing, software - distributed under the License is distributed on an "AS IS" BASIS, - WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied. - See the License for the specific language governing permissions and - limitations under the License. - -*/ - -pragma solidity ^0.4.24; -pragma experimental ABIEncoderV2; - -import "../../protocol/AssetProxy/ERC20Proxy.sol"; -import "../../protocol/AssetProxy/ERC721Proxy.sol"; - -contract TestAssetDataDecoders is - ERC721Proxy -{ - /// @dev Decodes ERC721 Asset data. - /// @param assetData Encoded byte array. - /// @return proxyId Intended ERC721 proxy id. - /// @return token ERC721 token address. - /// @return tokenId ERC721 token id. - /// @return receiverData Additional data with no specific format, which - /// is passed to the receiving contract's onERC721Received. - function publicDecodeERC721Data(bytes memory assetData) - public - pure - returns ( - address token, - uint256 tokenId, - bytes memory receiverData - ) - { - ( - token, - tokenId, - receiverData - ) = decodeERC721AssetData(assetData); - - return ( - token, - tokenId, - receiverData - ); - } -} diff --git a/packages/contracts/src/utils/artifacts.ts b/packages/contracts/src/utils/artifacts.ts index a46bab9ae..d58e7973c 100644 --- a/packages/contracts/src/utils/artifacts.ts +++ b/packages/contracts/src/utils/artifacts.ts @@ -11,7 +11,6 @@ import * as ExchangeWrapper from '../artifacts/ExchangeWrapper.json'; import * as MixinAuthorizable from '../artifacts/MixinAuthorizable.json'; import * as MultiSigWallet from '../artifacts/MultiSigWallet.json'; import * as MultiSigWalletWithTimeLock from '../artifacts/MultiSigWalletWithTimeLock.json'; -import * as TestAssetDataDecoders from '../artifacts/TestAssetDataDecoders.json'; import * as TestAssetProxyDispatcher from '../artifacts/TestAssetProxyDispatcher.json'; import * as TestAssetProxyOwner from '../artifacts/TestAssetProxyOwner.json'; import * as TestLibBytes from '../artifacts/TestLibBytes.json'; @@ -39,7 +38,6 @@ export const artifacts = { MultiSigWalletWithTimeLock: (MultiSigWalletWithTimeLock as any) as ContractArtifact, TestAssetProxyOwner: (TestAssetProxyOwner as any) as ContractArtifact, TestAssetProxyDispatcher: (TestAssetProxyDispatcher as any) as ContractArtifact, - TestAssetDataDecoders: (TestAssetDataDecoders as any) as ContractArtifact, TestLibBytes: (TestLibBytes as any) as ContractArtifact, TestLibs: (TestLibs as any) as ContractArtifact, TestSignatureValidator: (TestSignatureValidator as any) as ContractArtifact, |