diff options
| -rw-r--r-- | packages/contract-artifacts/artifacts/DutchAuction.json | 86 |
1 files changed, 2 insertions, 84 deletions
diff --git a/packages/contract-artifacts/artifacts/DutchAuction.json b/packages/contract-artifacts/artifacts/DutchAuction.json index 2c1998034..3c1cb8c4c 100644 --- a/packages/contract-artifacts/artifacts/DutchAuction.json +++ b/packages/contract-artifacts/artifacts/DutchAuction.json @@ -306,87 +306,5 @@ } } }, - "sources": { - "DutchAuction/DutchAuction.sol": { - "id": 28 - }, - "@0x/contracts-interfaces/contracts/protocol/Exchange/IExchange.sol": { - "id": 1 - }, - "@0x/contracts-interfaces/contracts/protocol/Exchange/IExchangeCore.sol": { - "id": 2 - }, - "@0x/contracts-libs/contracts/libs/LibOrder.sol": { - "id": 13 - }, - "@0x/contracts-libs/contracts/libs/LibEIP712.sol": { - "id": 9 - }, - "@0x/contracts-libs/contracts/libs/LibFillResults.sol": { - "id": 11 - }, - "@0x/contracts-utils/contracts/utils/SafeMath/SafeMath.sol": { - "id": 20 - }, - "@0x/contracts-interfaces/contracts/protocol/Exchange/IMatchOrders.sol": { - "id": 3 - }, - "@0x/contracts-interfaces/contracts/protocol/Exchange/ISignatureValidator.sol": { - "id": 4 - }, - "@0x/contracts-interfaces/contracts/protocol/Exchange/ITransactions.sol": { - "id": 5 - }, - "@0x/contracts-interfaces/contracts/protocol/Exchange/IAssetProxyDispatcher.sol": { - "id": 0 - }, - "@0x/contracts-interfaces/contracts/protocol/Exchange/IWrapperFunctions.sol": { - "id": 6 - }, - "@0x/contracts-tokens/contracts/tokens/ERC20Token/IERC20Token.sol": { - "id": 14 - }, - "@0x/contracts-utils/contracts/utils/LibBytes/LibBytes.sol": { - "id": 17 - } - }, - "sourceCodes": { - "DutchAuction/DutchAuction.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\npragma experimental ABIEncoderV2;\n\nimport \"@0x/contracts-interfaces/contracts/protocol/Exchange/IExchange.sol\";\nimport \"@0x/contracts-libs/contracts/libs/LibOrder.sol\";\nimport \"@0x/contracts-tokens/contracts/tokens/ERC20Token/IERC20Token.sol\";\nimport \"@0x/contracts-utils/contracts/utils/LibBytes/LibBytes.sol\";\nimport \"@0x/contracts-utils/contracts/utils/SafeMath/SafeMath.sol\";\n\n\ncontract DutchAuction is\n SafeMath\n{\n using LibBytes for bytes;\n\n // solhint-disable var-name-mixedcase\n IExchange internal EXCHANGE;\n\n struct AuctionDetails {\n uint256 beginTimeSeconds; // Auction begin unix timestamp: sellOrder.makerAssetData\n uint256 endTimeSeconds; // Auction end unix timestamp: sellOrder.expiryTimeSeconds\n uint256 beginAmount; // Auction begin amount: sellOrder.makerAssetData\n uint256 endAmount; // Auction end amount: sellOrder.takerAssetAmount\n uint256 currentAmount; // Calculated amount given block.timestamp\n uint256 currentTimeSeconds; // block.timestamp\n }\n\n constructor (address _exchange)\n public\n {\n EXCHANGE = IExchange(_exchange);\n }\n\n /// @dev Matches the buy and sell orders at an amount given the following: the current block time, the auction\n /// start time and the auction begin amount. The sell order is a an order at the lowest amount\n /// at the end of the auction. Excess from the match is transferred to the seller.\n /// Over time the price moves from beginAmount to endAmount given the current block.timestamp.\n /// sellOrder.expiryTimeSeconds is the end time of the auction.\n /// sellOrder.takerAssetAmount is the end amount of the auction (lowest possible amount).\n /// sellOrder.makerAssetData is the ABI encoded Asset Proxy data with the following data appended\n /// buyOrder.makerAssetData is the buyers bid on the auction, must meet the amount for the current block timestamp\n /// (uint256 beginTimeSeconds, uint256 beginAmount).\n /// This function reverts in the following scenarios:\n /// * Auction has not started (auctionDetails.currentTimeSeconds < auctionDetails.beginTimeSeconds)\n /// * Auction has expired (auctionDetails.endTimeSeconds < auctionDetails.currentTimeSeconds)\n /// * Amount is invalid: Buy order amount is too low (buyOrder.makerAssetAmount < auctionDetails.currentAmount)\n /// * Amount is invalid: Invalid begin amount (auctionDetails.beginAmount > auctionDetails.endAmount)\n /// * Any failure in the 0x Match Orders\n /// @param buyOrder The Buyer's order. This order is for the current expected price of the auction.\n /// @param sellOrder The Seller's order. This order is for the lowest amount (at the end of the auction).\n /// @param buySignature Proof that order was created by the buyer.\n /// @param sellSignature Proof that order was created by the seller.\n /// @return matchedFillResults amounts filled and fees paid by maker and taker of matched orders.\n function matchOrders(\n LibOrder.Order memory buyOrder,\n LibOrder.Order memory sellOrder,\n bytes memory buySignature,\n bytes memory sellSignature\n )\n public\n returns (LibFillResults.MatchedFillResults memory matchedFillResults)\n {\n AuctionDetails memory auctionDetails = getAuctionDetails(sellOrder);\n // Ensure the auction has not yet started\n require(\n auctionDetails.currentTimeSeconds >= auctionDetails.beginTimeSeconds,\n \"AUCTION_NOT_STARTED\"\n );\n // Ensure the auction has not expired. This will fail later in 0x but we can save gas by failing early\n require(\n sellOrder.expirationTimeSeconds > auctionDetails.currentTimeSeconds,\n \"AUCTION_EXPIRED\"\n );\n // Validate the buyer amount is greater than the current auction amount\n require(\n buyOrder.makerAssetAmount >= auctionDetails.currentAmount,\n \"INVALID_AMOUNT\"\n );\n // Match orders, maximally filling `buyOrder`\n matchedFillResults = EXCHANGE.matchOrders(\n buyOrder,\n sellOrder,\n buySignature,\n sellSignature\n );\n // The difference in sellOrder.takerAssetAmount and current amount is given as spread to the matcher\n // This may include additional spread from the buyOrder.makerAssetAmount and the currentAmount.\n // e.g currentAmount is 30, sellOrder.takerAssetAmount is 10 and buyOrder.makerAssetamount is 40.\n // 10 (40-30) is returned to the buyer, 20 (30-10) sent to the seller and 10 has previously\n // been transferred to the seller during matchOrders\n uint256 leftMakerAssetSpreadAmount = matchedFillResults.leftMakerAssetSpreadAmount;\n if (leftMakerAssetSpreadAmount > 0) {\n // ERC20 Asset data itself is encoded as follows:\n //\n // | Area | Offset | Length | Contents |\n // |----------|--------|---------|-------------------------------------|\n // | Header | 0 | 4 | function selector |\n // | Params | | 1 * 32 | function parameters: |\n // | | 4 | 12 | 1. token address padding |\n // | | 16 | 20 | 2. token address |\n bytes memory assetData = sellOrder.takerAssetData;\n address token = assetData.readAddress(16);\n // Calculate the excess from the buy order. This can occur if the buyer sends in a higher\n // amount than the calculated current amount\n uint256 buyerExcessAmount = safeSub(buyOrder.makerAssetAmount, auctionDetails.currentAmount);\n uint256 sellerExcessAmount = safeSub(leftMakerAssetSpreadAmount, buyerExcessAmount);\n // Return the difference between auctionDetails.currentAmount and sellOrder.takerAssetAmount\n // to the seller\n if (sellerExcessAmount > 0) {\n IERC20Token(token).transfer(sellOrder.makerAddress, sellerExcessAmount);\n }\n // Return the difference between buyOrder.makerAssetAmount and auctionDetails.currentAmount\n // to the buyer\n if (buyerExcessAmount > 0) {\n IERC20Token(token).transfer(buyOrder.makerAddress, buyerExcessAmount);\n }\n }\n return matchedFillResults;\n }\n\n /// @dev Calculates the Auction Details for the given order\n /// @param order The sell order\n /// @return AuctionDetails\n function getAuctionDetails(\n LibOrder.Order memory order\n )\n public\n returns (AuctionDetails memory auctionDetails)\n {\n uint256 makerAssetDataLength = order.makerAssetData.length;\n // It is unknown the encoded data of makerAssetData, we assume the last 64 bytes\n // are the Auction Details encoding.\n // Auction Details is encoded as follows:\n //\n // | Area | Offset | Length | Contents |\n // |----------|--------|---------|-------------------------------------|\n // | Params | | 2 * 32 | parameters: |\n // | | -64 | 32 | 1. auction begin unix timestamp |\n // | | -32 | 32 | 2. auction begin begin amount |\n // ERC20 asset data length is 4+32, 64 for auction details results in min length 100\n require(\n makerAssetDataLength >= 100,\n \"INVALID_ASSET_DATA\"\n );\n uint256 auctionBeginTimeSeconds = order.makerAssetData.readUint256(makerAssetDataLength - 64);\n uint256 auctionBeginAmount = order.makerAssetData.readUint256(makerAssetDataLength - 32);\n // Ensure the auction has a valid begin time\n require(\n order.expirationTimeSeconds > auctionBeginTimeSeconds,\n \"INVALID_BEGIN_TIME\"\n );\n uint256 auctionDurationSeconds = order.expirationTimeSeconds-auctionBeginTimeSeconds;\n // Ensure the auction goes from high to low\n uint256 minAmount = order.takerAssetAmount;\n require(\n auctionBeginAmount > minAmount,\n \"INVALID_AMOUNT\"\n );\n uint256 amountDelta = auctionBeginAmount-minAmount;\n // solhint-disable-next-line not-rely-on-time\n uint256 timestamp = block.timestamp;\n auctionDetails.beginTimeSeconds = auctionBeginTimeSeconds;\n auctionDetails.endTimeSeconds = order.expirationTimeSeconds;\n auctionDetails.beginAmount = auctionBeginAmount;\n auctionDetails.endAmount = minAmount;\n auctionDetails.currentTimeSeconds = timestamp;\n\n uint256 remainingDurationSeconds = order.expirationTimeSeconds-timestamp;\n if (timestamp < auctionBeginTimeSeconds) {\n // If the auction has not yet begun the current amount is the auctionBeginAmount\n auctionDetails.currentAmount = auctionBeginAmount;\n } else if (timestamp >= order.expirationTimeSeconds) {\n // If the auction has ended the current amount is the minAmount.\n // Auction end time is guaranteed by 0x Exchange due to the order expiration\n auctionDetails.currentAmount = minAmount;\n } else {\n auctionDetails.currentAmount = safeAdd(\n minAmount,\n safeDiv(\n safeMul(remainingDurationSeconds, amountDelta),\n auctionDurationSeconds\n )\n );\n }\n return auctionDetails;\n }\n}\n", - "@0x/contracts-interfaces/contracts/protocol/Exchange/IExchange.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\npragma experimental ABIEncoderV2;\n\nimport \"./IExchangeCore.sol\";\nimport \"./IMatchOrders.sol\";\nimport \"./ISignatureValidator.sol\";\nimport \"./ITransactions.sol\";\nimport \"./IAssetProxyDispatcher.sol\";\nimport \"./IWrapperFunctions.sol\";\n\n\n// solhint-disable no-empty-blocks\ncontract IExchange is\n IExchangeCore,\n IMatchOrders,\n ISignatureValidator,\n ITransactions,\n IAssetProxyDispatcher,\n IWrapperFunctions\n{}\n", - "@0x/contracts-interfaces/contracts/protocol/Exchange/IExchangeCore.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\npragma experimental ABIEncoderV2;\n\nimport \"@0x/contracts-libs/contracts/libs/LibOrder.sol\";\nimport \"@0x/contracts-libs/contracts/libs/LibFillResults.sol\";\n\n\ncontract IExchangeCore {\n\n /// @dev Cancels all orders created by makerAddress with a salt less than or equal to the targetOrderEpoch\n /// and senderAddress equal to msg.sender (or null address if msg.sender == makerAddress).\n /// @param targetOrderEpoch Orders created with a salt less or equal to this value will be cancelled.\n function cancelOrdersUpTo(uint256 targetOrderEpoch)\n external;\n\n /// @dev Fills the input order.\n /// @param order Order struct containing order specifications.\n /// @param takerAssetFillAmount Desired amount of takerAsset to sell.\n /// @param signature Proof that order has been created by maker.\n /// @return Amounts filled and fees paid by maker and taker.\n function fillOrder(\n LibOrder.Order memory order,\n uint256 takerAssetFillAmount,\n bytes memory signature\n )\n public\n returns (LibFillResults.FillResults memory fillResults);\n\n /// @dev After calling, the order can not be filled anymore.\n /// @param order Order struct containing order specifications.\n function cancelOrder(LibOrder.Order memory order)\n public;\n\n /// @dev Gets information about an order: status, hash, and amount filled.\n /// @param order Order to gather information on.\n /// @return OrderInfo Information about the order and its state.\n /// See LibOrder.OrderInfo for a complete description.\n function getOrderInfo(LibOrder.Order memory order)\n public\n view\n returns (LibOrder.OrderInfo memory orderInfo);\n}\n", - "@0x/contracts-libs/contracts/libs/LibOrder.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\n\nimport \"./LibEIP712.sol\";\n\n\ncontract LibOrder is\n LibEIP712\n{\n // Hash for the EIP712 Order Schema\n bytes32 constant internal EIP712_ORDER_SCHEMA_HASH = keccak256(abi.encodePacked(\n \"Order(\",\n \"address makerAddress,\",\n \"address takerAddress,\",\n \"address feeRecipientAddress,\",\n \"address senderAddress,\",\n \"uint256 makerAssetAmount,\",\n \"uint256 takerAssetAmount,\",\n \"uint256 makerFee,\",\n \"uint256 takerFee,\",\n \"uint256 expirationTimeSeconds,\",\n \"uint256 salt,\",\n \"bytes makerAssetData,\",\n \"bytes takerAssetData\",\n \")\"\n ));\n\n // A valid order remains fillable until it is expired, fully filled, or cancelled.\n // An order's state is unaffected by external factors, like account balances.\n enum OrderStatus {\n INVALID, // Default value\n INVALID_MAKER_ASSET_AMOUNT, // Order does not have a valid maker asset amount\n INVALID_TAKER_ASSET_AMOUNT, // Order does not have a valid taker asset amount\n FILLABLE, // Order is fillable\n EXPIRED, // Order has already expired\n FULLY_FILLED, // Order is fully filled\n CANCELLED // Order has been cancelled\n }\n\n // solhint-disable max-line-length\n struct Order {\n address makerAddress; // Address that created the order. \n address takerAddress; // Address that is allowed to fill the order. If set to 0, any address is allowed to fill the order. \n address feeRecipientAddress; // Address that will recieve fees when order is filled. \n address senderAddress; // Address that is allowed to call Exchange contract methods that affect this order. If set to 0, any address is allowed to call these methods.\n uint256 makerAssetAmount; // Amount of makerAsset being offered by maker. Must be greater than 0. \n uint256 takerAssetAmount; // Amount of takerAsset being bid on by maker. Must be greater than 0. \n uint256 makerFee; // Amount of ZRX paid to feeRecipient by maker when order is filled. If set to 0, no transfer of ZRX from maker to feeRecipient will be attempted.\n uint256 takerFee; // Amount of ZRX paid to feeRecipient by taker when order is filled. If set to 0, no transfer of ZRX from taker to feeRecipient will be attempted.\n uint256 expirationTimeSeconds; // Timestamp in seconds at which order expires. \n uint256 salt; // Arbitrary number to facilitate uniqueness of the order's hash. \n bytes makerAssetData; // Encoded data that can be decoded by a specified proxy contract when transferring makerAsset. The last byte references the id of this proxy.\n bytes takerAssetData; // Encoded data that can be decoded by a specified proxy contract when transferring takerAsset. The last byte references the id of this proxy.\n }\n // solhint-enable max-line-length\n\n struct OrderInfo {\n uint8 orderStatus; // Status that describes order's validity and fillability.\n bytes32 orderHash; // EIP712 hash of the order (see LibOrder.getOrderHash).\n uint256 orderTakerAssetFilledAmount; // Amount of order that has already been filled.\n }\n\n /// @dev Calculates Keccak-256 hash of the order.\n /// @param order The order structure.\n /// @return Keccak-256 EIP712 hash of the order.\n function getOrderHash(Order memory order)\n internal\n view\n returns (bytes32 orderHash)\n {\n orderHash = hashEIP712Message(hashOrder(order));\n return orderHash;\n }\n\n /// @dev Calculates EIP712 hash of the order.\n /// @param order The order structure.\n /// @return EIP712 hash of the order.\n function hashOrder(Order memory order)\n internal\n pure\n returns (bytes32 result)\n {\n bytes32 schemaHash = EIP712_ORDER_SCHEMA_HASH;\n bytes32 makerAssetDataHash = keccak256(order.makerAssetData);\n bytes32 takerAssetDataHash = keccak256(order.takerAssetData);\n\n // Assembly for more efficiently computing:\n // keccak256(abi.encodePacked(\n // EIP712_ORDER_SCHEMA_HASH,\n // bytes32(order.makerAddress),\n // bytes32(order.takerAddress),\n // bytes32(order.feeRecipientAddress),\n // bytes32(order.senderAddress),\n // order.makerAssetAmount,\n // order.takerAssetAmount,\n // order.makerFee,\n // order.takerFee,\n // order.expirationTimeSeconds,\n // order.salt,\n // keccak256(order.makerAssetData),\n // keccak256(order.takerAssetData)\n // ));\n\n assembly {\n // Calculate memory addresses that will be swapped out before hashing\n let pos1 := sub(order, 32)\n let pos2 := add(order, 320)\n let pos3 := add(order, 352)\n\n // Backup\n let temp1 := mload(pos1)\n let temp2 := mload(pos2)\n let temp3 := mload(pos3)\n \n // Hash in place\n mstore(pos1, schemaHash)\n mstore(pos2, makerAssetDataHash)\n mstore(pos3, takerAssetDataHash)\n result := keccak256(pos1, 416)\n \n // Restore\n mstore(pos1, temp1)\n mstore(pos2, temp2)\n mstore(pos3, temp3)\n }\n return result;\n }\n}\n", - "@0x/contracts-libs/contracts/libs/LibEIP712.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\n\n\ncontract LibEIP712 {\n\n // EIP191 header for EIP712 prefix\n string constant internal EIP191_HEADER = \"\\x19\\x01\";\n\n // EIP712 Domain Name value\n string constant internal EIP712_DOMAIN_NAME = \"0x Protocol\";\n\n // EIP712 Domain Version value\n string constant internal EIP712_DOMAIN_VERSION = \"2\";\n\n // Hash of the EIP712 Domain Separator Schema\n bytes32 constant internal EIP712_DOMAIN_SEPARATOR_SCHEMA_HASH = keccak256(abi.encodePacked(\n \"EIP712Domain(\",\n \"string name,\",\n \"string version,\",\n \"address verifyingContract\",\n \")\"\n ));\n\n // Hash of the EIP712 Domain Separator data\n // solhint-disable-next-line var-name-mixedcase\n bytes32 public EIP712_DOMAIN_HASH;\n\n constructor ()\n public\n {\n EIP712_DOMAIN_HASH = keccak256(abi.encodePacked(\n EIP712_DOMAIN_SEPARATOR_SCHEMA_HASH,\n keccak256(bytes(EIP712_DOMAIN_NAME)),\n keccak256(bytes(EIP712_DOMAIN_VERSION)),\n bytes32(address(this))\n ));\n }\n\n /// @dev Calculates EIP712 encoding for a hash struct in this EIP712 Domain.\n /// @param hashStruct The EIP712 hash struct.\n /// @return EIP712 hash applied to this EIP712 Domain.\n function hashEIP712Message(bytes32 hashStruct)\n internal\n view\n returns (bytes32 result)\n {\n bytes32 eip712DomainHash = EIP712_DOMAIN_HASH;\n\n // Assembly for more efficient computing:\n // keccak256(abi.encodePacked(\n // EIP191_HEADER,\n // EIP712_DOMAIN_HASH,\n // hashStruct \n // ));\n\n assembly {\n // Load free memory pointer\n let memPtr := mload(64)\n\n mstore(memPtr, 0x1901000000000000000000000000000000000000000000000000000000000000) // EIP191 header\n mstore(add(memPtr, 2), eip712DomainHash) // EIP712 domain hash\n mstore(add(memPtr, 34), hashStruct) // Hash of struct\n\n // Compute hash\n result := keccak256(memPtr, 66)\n }\n return result;\n }\n}\n", - "@0x/contracts-libs/contracts/libs/LibFillResults.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\n\nimport \"@0x/contracts-utils/contracts/utils/SafeMath/SafeMath.sol\";\n\n\ncontract LibFillResults is\n SafeMath\n{\n struct FillResults {\n uint256 makerAssetFilledAmount; // Total amount of makerAsset(s) filled.\n uint256 takerAssetFilledAmount; // Total amount of takerAsset(s) filled.\n uint256 makerFeePaid; // Total amount of ZRX paid by maker(s) to feeRecipient(s).\n uint256 takerFeePaid; // Total amount of ZRX paid by taker to feeRecipients(s).\n }\n\n struct MatchedFillResults {\n FillResults left; // Amounts filled and fees paid of left order.\n FillResults right; // Amounts filled and fees paid of right order.\n uint256 leftMakerAssetSpreadAmount; // Spread between price of left and right order, denominated in the left order's makerAsset, paid to taker.\n }\n\n /// @dev Adds properties of both FillResults instances.\n /// Modifies the first FillResults instance specified.\n /// @param totalFillResults Fill results instance that will be added onto.\n /// @param singleFillResults Fill results instance that will be added to totalFillResults.\n function addFillResults(FillResults memory totalFillResults, FillResults memory singleFillResults)\n internal\n pure\n {\n totalFillResults.makerAssetFilledAmount = safeAdd(totalFillResults.makerAssetFilledAmount, singleFillResults.makerAssetFilledAmount);\n totalFillResults.takerAssetFilledAmount = safeAdd(totalFillResults.takerAssetFilledAmount, singleFillResults.takerAssetFilledAmount);\n totalFillResults.makerFeePaid = safeAdd(totalFillResults.makerFeePaid, singleFillResults.makerFeePaid);\n totalFillResults.takerFeePaid = safeAdd(totalFillResults.takerFeePaid, singleFillResults.takerFeePaid);\n }\n}\n", - "@0x/contracts-utils/contracts/utils/SafeMath/SafeMath.sol": "pragma solidity 0.4.24;\n\n\ncontract SafeMath {\n\n function safeMul(uint256 a, uint256 b)\n internal\n pure\n returns (uint256)\n {\n if (a == 0) {\n return 0;\n }\n uint256 c = a * b;\n require(\n c / a == b,\n \"UINT256_OVERFLOW\"\n );\n return c;\n }\n\n function safeDiv(uint256 a, uint256 b)\n internal\n pure\n returns (uint256)\n {\n uint256 c = a / b;\n return c;\n }\n\n function safeSub(uint256 a, uint256 b)\n internal\n pure\n returns (uint256)\n {\n require(\n b <= a,\n \"UINT256_UNDERFLOW\"\n );\n return a - b;\n }\n\n function safeAdd(uint256 a, uint256 b)\n internal\n pure\n returns (uint256)\n {\n uint256 c = a + b;\n require(\n c >= a,\n \"UINT256_OVERFLOW\"\n );\n return c;\n }\n\n function max64(uint64 a, uint64 b)\n internal\n pure\n returns (uint256)\n {\n return a >= b ? a : b;\n }\n\n function min64(uint64 a, uint64 b)\n internal\n pure\n returns (uint256)\n {\n return a < b ? a : b;\n }\n\n function max256(uint256 a, uint256 b)\n internal\n pure\n returns (uint256)\n {\n return a >= b ? a : b;\n }\n\n function min256(uint256 a, uint256 b)\n internal\n pure\n returns (uint256)\n {\n return a < b ? a : b;\n }\n}\n", - "@0x/contracts-interfaces/contracts/protocol/Exchange/IMatchOrders.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\npragma solidity 0.4.24;\npragma experimental ABIEncoderV2;\n\nimport \"@0x/contracts-libs/contracts/libs/LibOrder.sol\";\nimport \"@0x/contracts-libs/contracts/libs/LibFillResults.sol\";\n\n\ncontract IMatchOrders {\n\n /// @dev Match two complementary orders that have a profitable spread.\n /// Each order is filled at their respective price point. However, the calculations are\n /// carried out as though the orders are both being filled at the right order's price point.\n /// The profit made by the left order goes to the taker (who matched the two orders).\n /// @param leftOrder First order to match.\n /// @param rightOrder Second order to match.\n /// @param leftSignature Proof that order was created by the left maker.\n /// @param rightSignature Proof that order was created by the right maker.\n /// @return matchedFillResults Amounts filled and fees paid by maker and taker of matched orders.\n function matchOrders(\n LibOrder.Order memory leftOrder,\n LibOrder.Order memory rightOrder,\n bytes memory leftSignature,\n bytes memory rightSignature\n )\n public\n returns (LibFillResults.MatchedFillResults memory matchedFillResults);\n}\n", - "@0x/contracts-interfaces/contracts/protocol/Exchange/ISignatureValidator.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\n\n\ncontract ISignatureValidator {\n\n /// @dev Approves a hash on-chain using any valid signature type.\n /// After presigning a hash, the preSign signature type will become valid for that hash and signer.\n /// @param signerAddress Address that should have signed the given hash.\n /// @param signature Proof that the hash has been signed by signer.\n function preSign(\n bytes32 hash,\n address signerAddress,\n bytes signature\n )\n external;\n \n /// @dev Approves/unnapproves a Validator contract to verify signatures on signer's behalf.\n /// @param validatorAddress Address of Validator contract.\n /// @param approval Approval or disapproval of Validator contract.\n function setSignatureValidatorApproval(\n address validatorAddress,\n bool approval\n )\n external;\n\n /// @dev Verifies that a signature is valid.\n /// @param hash Message hash that is signed.\n /// @param signerAddress Address of signer.\n /// @param signature Proof of signing.\n /// @return Validity of order signature.\n function isValidSignature(\n bytes32 hash,\n address signerAddress,\n bytes memory signature\n )\n public\n view\n returns (bool isValid);\n}\n", - "@0x/contracts-interfaces/contracts/protocol/Exchange/ITransactions.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\npragma solidity 0.4.24;\n\n\ncontract ITransactions {\n\n /// @dev Executes an exchange method call in the context of signer.\n /// @param salt Arbitrary number to ensure uniqueness of transaction hash.\n /// @param signerAddress Address of transaction signer.\n /// @param data AbiV2 encoded calldata.\n /// @param signature Proof of signer transaction by signer.\n function executeTransaction(\n uint256 salt,\n address signerAddress,\n bytes data,\n bytes signature\n )\n external;\n}\n", - "@0x/contracts-interfaces/contracts/protocol/Exchange/IAssetProxyDispatcher.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\n\n\ncontract IAssetProxyDispatcher {\n\n /// @dev Registers an asset proxy to its asset proxy id.\n /// Once an asset proxy is registered, it cannot be unregistered.\n /// @param assetProxy Address of new asset proxy to register.\n function registerAssetProxy(address assetProxy)\n external;\n\n /// @dev Gets an asset proxy.\n /// @param assetProxyId Id of the asset proxy.\n /// @return The asset proxy registered to assetProxyId. Returns 0x0 if no proxy is registered.\n function getAssetProxy(bytes4 assetProxyId)\n external\n view\n returns (address);\n}\n", - "@0x/contracts-interfaces/contracts/protocol/Exchange/IWrapperFunctions.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\npragma experimental ABIEncoderV2;\n\nimport \"@0x/contracts-libs/contracts/libs/LibOrder.sol\";\nimport \"@0x/contracts-libs/contracts/libs/LibFillResults.sol\";\n\n\ncontract IWrapperFunctions {\n\n /// @dev Fills the input order. Reverts if exact takerAssetFillAmount not filled.\n /// @param order LibOrder.Order struct containing order specifications.\n /// @param takerAssetFillAmount Desired amount of takerAsset to sell.\n /// @param signature Proof that order has been created by maker.\n function fillOrKillOrder(\n LibOrder.Order memory order,\n uint256 takerAssetFillAmount,\n bytes memory signature\n )\n public\n returns (LibFillResults.FillResults memory fillResults);\n\n /// @dev Fills an order with specified parameters and ECDSA signature.\n /// Returns false if the transaction would otherwise revert.\n /// @param order LibOrder.Order struct containing order specifications.\n /// @param takerAssetFillAmount Desired amount of takerAsset to sell.\n /// @param signature Proof that order has been created by maker.\n /// @return Amounts filled and fees paid by maker and taker.\n function fillOrderNoThrow(\n LibOrder.Order memory order,\n uint256 takerAssetFillAmount,\n bytes memory signature\n )\n public\n returns (LibFillResults.FillResults memory fillResults);\n\n /// @dev Synchronously executes multiple calls of fillOrder.\n /// @param orders Array of order specifications.\n /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.\n /// @param signatures Proofs that orders have been created by makers.\n /// @return Amounts filled and fees paid by makers and taker.\n function batchFillOrders(\n LibOrder.Order[] memory orders,\n uint256[] memory takerAssetFillAmounts,\n bytes[] memory signatures\n )\n public\n returns (LibFillResults.FillResults memory totalFillResults);\n\n /// @dev Synchronously executes multiple calls of fillOrKill.\n /// @param orders Array of order specifications.\n /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.\n /// @param signatures Proofs that orders have been created by makers.\n /// @return Amounts filled and fees paid by makers and taker.\n function batchFillOrKillOrders(\n LibOrder.Order[] memory orders,\n uint256[] memory takerAssetFillAmounts,\n bytes[] memory signatures\n )\n public\n returns (LibFillResults.FillResults memory totalFillResults);\n\n /// @dev Fills an order with specified parameters and ECDSA signature.\n /// Returns false if the transaction would otherwise revert.\n /// @param orders Array of order specifications.\n /// @param takerAssetFillAmounts Array of desired amounts of takerAsset to sell in orders.\n /// @param signatures Proofs that orders have been created by makers.\n /// @return Amounts filled and fees paid by makers and taker.\n function batchFillOrdersNoThrow(\n LibOrder.Order[] memory orders,\n uint256[] memory takerAssetFillAmounts,\n bytes[] memory signatures\n )\n public\n returns (LibFillResults.FillResults memory totalFillResults);\n\n /// @dev Synchronously executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.\n /// @param orders Array of order specifications.\n /// @param takerAssetFillAmount Desired amount of takerAsset to sell.\n /// @param signatures Proofs that orders have been created by makers.\n /// @return Amounts filled and fees paid by makers and taker.\n function marketSellOrders(\n LibOrder.Order[] memory orders,\n uint256 takerAssetFillAmount,\n bytes[] memory signatures\n )\n public\n returns (LibFillResults.FillResults memory totalFillResults);\n\n /// @dev Synchronously executes multiple calls of fillOrder until total amount of takerAsset is sold by taker.\n /// Returns false if the transaction would otherwise revert.\n /// @param orders Array of order specifications.\n /// @param takerAssetFillAmount Desired amount of takerAsset to sell.\n /// @param signatures Proofs that orders have been signed by makers.\n /// @return Amounts filled and fees paid by makers and taker.\n function marketSellOrdersNoThrow(\n LibOrder.Order[] memory orders,\n uint256 takerAssetFillAmount,\n bytes[] memory signatures\n )\n public\n returns (LibFillResults.FillResults memory totalFillResults);\n\n /// @dev Synchronously executes multiple calls of fillOrder until total amount of makerAsset is bought by taker.\n /// @param orders Array of order specifications.\n /// @param makerAssetFillAmount Desired amount of makerAsset to buy.\n /// @param signatures Proofs that orders have been signed by makers.\n /// @return Amounts filled and fees paid by makers and taker.\n function marketBuyOrders(\n LibOrder.Order[] memory orders,\n uint256 makerAssetFillAmount,\n bytes[] memory signatures\n )\n public\n returns (LibFillResults.FillResults memory totalFillResults);\n\n /// @dev Synchronously executes multiple fill orders in a single transaction until total amount is bought by taker.\n /// Returns false if the transaction would otherwise revert.\n /// @param orders Array of order specifications.\n /// @param makerAssetFillAmount Desired amount of makerAsset to buy.\n /// @param signatures Proofs that orders have been signed by makers.\n /// @return Amounts filled and fees paid by makers and taker.\n function marketBuyOrdersNoThrow(\n LibOrder.Order[] memory orders,\n uint256 makerAssetFillAmount,\n bytes[] memory signatures\n )\n public\n returns (LibFillResults.FillResults memory totalFillResults);\n\n /// @dev Synchronously cancels multiple orders in a single transaction.\n /// @param orders Array of order specifications.\n function batchCancelOrders(LibOrder.Order[] memory orders)\n public;\n\n /// @dev Fetches information for all passed in orders\n /// @param orders Array of order specifications.\n /// @return Array of OrderInfo instances that correspond to each order.\n function getOrdersInfo(LibOrder.Order[] memory orders)\n public\n view\n returns (LibOrder.OrderInfo[] memory);\n}\n", - "@0x/contracts-tokens/contracts/tokens/ERC20Token/IERC20Token.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\n\n\ncontract IERC20Token {\n\n // solhint-disable no-simple-event-func-name\n event Transfer(\n address indexed _from,\n address indexed _to,\n uint256 _value\n );\n\n event Approval(\n address indexed _owner,\n address indexed _spender,\n uint256 _value\n );\n\n /// @dev send `value` token to `to` from `msg.sender`\n /// @param _to The address of the recipient\n /// @param _value The amount of token to be transferred\n /// @return True if transfer was successful\n function transfer(address _to, uint256 _value)\n external\n returns (bool);\n\n /// @dev send `value` token to `to` from `from` on the condition it is approved by `from`\n /// @param _from The address of the sender\n /// @param _to The address of the recipient\n /// @param _value The amount of token to be transferred\n /// @return True if transfer was successful\n function transferFrom(\n address _from,\n address _to,\n uint256 _value\n )\n external\n returns (bool);\n \n /// @dev `msg.sender` approves `_spender` to spend `_value` tokens\n /// @param _spender The address of the account able to transfer the tokens\n /// @param _value The amount of wei to be approved for transfer\n /// @return Always true if the call has enough gas to complete execution\n function approve(address _spender, uint256 _value)\n external\n returns (bool);\n\n /// @dev Query total supply of token\n /// @return Total supply of token\n function totalSupply()\n external\n view\n returns (uint256);\n \n /// @param _owner The address from which the balance will be retrieved\n /// @return Balance of owner\n function balanceOf(address _owner)\n external\n view\n returns (uint256);\n\n /// @param _owner The address of the account owning tokens\n /// @param _spender The address of the account able to transfer the tokens\n /// @return Amount of remaining tokens allowed to spent\n function allowance(address _owner, address _spender)\n external\n view\n returns (uint256);\n}\n", - "@0x/contracts-utils/contracts/utils/LibBytes/LibBytes.sol": "/*\n\n Copyright 2018 ZeroEx Intl.\n\n Licensed under the Apache License, Version 2.0 (the \"License\");\n you may not use this file except in compliance with the License.\n You may obtain a copy of the License at\n\n http://www.apache.org/licenses/LICENSE-2.0\n\n Unless required by applicable law or agreed to in writing, software\n distributed under the License is distributed on an \"AS IS\" BASIS,\n WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.\n See the License for the specific language governing permissions and\n limitations under the License.\n\n*/\n\npragma solidity 0.4.24;\n\n\nlibrary LibBytes {\n\n using LibBytes for bytes;\n\n /// @dev Gets the memory address for a byte array.\n /// @param input Byte array to lookup.\n /// @return memoryAddress Memory address of byte array. This\n /// points to the header of the byte array which contains\n /// the length.\n function rawAddress(bytes memory input)\n internal\n pure\n returns (uint256 memoryAddress)\n {\n assembly {\n memoryAddress := input\n }\n return memoryAddress;\n }\n \n /// @dev Gets the memory address for the contents of a byte array.\n /// @param input Byte array to lookup.\n /// @return memoryAddress Memory address of the contents of the byte array.\n function contentAddress(bytes memory input)\n internal\n pure\n returns (uint256 memoryAddress)\n {\n assembly {\n memoryAddress := add(input, 32)\n }\n return memoryAddress;\n }\n\n /// @dev Copies `length` bytes from memory location `source` to `dest`.\n /// @param dest memory address to copy bytes to.\n /// @param source memory address to copy bytes from.\n /// @param length number of bytes to copy.\n function memCopy(\n uint256 dest,\n uint256 source,\n uint256 length\n )\n internal\n pure\n {\n if (length < 32) {\n // Handle a partial word by reading destination and masking\n // off the bits we are interested in.\n // This correctly handles overlap, zero lengths and source == dest\n assembly {\n let mask := sub(exp(256, sub(32, length)), 1)\n let s := and(mload(source), not(mask))\n let d := and(mload(dest), mask)\n mstore(dest, or(s, d))\n }\n } else {\n // Skip the O(length) loop when source == dest.\n if (source == dest) {\n return;\n }\n\n // For large copies we copy whole words at a time. The final\n // word is aligned to the end of the range (instead of after the\n // previous) to handle partial words. So a copy will look like this:\n //\n // ####\n // ####\n // ####\n // ####\n //\n // We handle overlap in the source and destination range by\n // changing the copying direction. This prevents us from\n // overwriting parts of source that we still need to copy.\n //\n // This correctly handles source == dest\n //\n if (source > dest) {\n assembly {\n // We subtract 32 from `sEnd` and `dEnd` because it\n // is easier to compare with in the loop, and these\n // are also the addresses we need for copying the\n // last bytes.\n length := sub(length, 32)\n let sEnd := add(source, length)\n let dEnd := add(dest, length)\n\n // Remember the last 32 bytes of source\n // This needs to be done here and not after the loop\n // because we may have overwritten the last bytes in\n // source already due to overlap.\n let last := mload(sEnd)\n\n // Copy whole words front to back\n // Note: the first check is always true,\n // this could have been a do-while loop.\n // solhint-disable-next-line no-empty-blocks\n for {} lt(source, sEnd) {} {\n mstore(dest, mload(source))\n source := add(source, 32)\n dest := add(dest, 32)\n }\n \n // Write the last 32 bytes\n mstore(dEnd, last)\n }\n } else {\n assembly {\n // We subtract 32 from `sEnd` and `dEnd` because those\n // are the starting points when copying a word at the end.\n length := sub(length, 32)\n let sEnd := add(source, length)\n let dEnd := add(dest, length)\n\n // Remember the first 32 bytes of source\n // This needs to be done here and not after the loop\n // because we may have overwritten the first bytes in\n // source already due to overlap.\n let first := mload(source)\n\n // Copy whole words back to front\n // We use a signed comparisson here to allow dEnd to become\n // negative (happens when source and dest < 32). Valid\n // addresses in local memory will never be larger than\n // 2**255, so they can be safely re-interpreted as signed.\n // Note: the first check is always true,\n // this could have been a do-while loop.\n // solhint-disable-next-line no-empty-blocks\n for {} slt(dest, dEnd) {} {\n mstore(dEnd, mload(sEnd))\n sEnd := sub(sEnd, 32)\n dEnd := sub(dEnd, 32)\n }\n \n // Write the first 32 bytes\n mstore(dest, first)\n }\n }\n }\n }\n\n /// @dev Returns a slices from a byte array.\n /// @param b The byte array to take a slice from.\n /// @param from The starting index for the slice (inclusive).\n /// @param to The final index for the slice (exclusive).\n /// @return result The slice containing bytes at indices [from, to)\n function slice(\n bytes memory b,\n uint256 from,\n uint256 to\n )\n internal\n pure\n returns (bytes memory result)\n {\n require(\n from <= to,\n \"FROM_LESS_THAN_TO_REQUIRED\"\n );\n require(\n to < b.length,\n \"TO_LESS_THAN_LENGTH_REQUIRED\"\n );\n \n // Create a new bytes structure and copy contents\n result = new bytes(to - from);\n memCopy(\n result.contentAddress(),\n b.contentAddress() + from,\n result.length\n );\n return result;\n }\n \n /// @dev Returns a slice from a byte array without preserving the input.\n /// @param b The byte array to take a slice from. Will be destroyed in the process.\n /// @param from The starting index for the slice (inclusive).\n /// @param to The final index for the slice (exclusive).\n /// @return result The slice containing bytes at indices [from, to)\n /// @dev When `from == 0`, the original array will match the slice. In other cases its state will be corrupted.\n function sliceDestructive(\n bytes memory b,\n uint256 from,\n uint256 to\n )\n internal\n pure\n returns (bytes memory result)\n {\n require(\n from <= to,\n \"FROM_LESS_THAN_TO_REQUIRED\"\n );\n require(\n to < b.length,\n \"TO_LESS_THAN_LENGTH_REQUIRED\"\n );\n \n // Create a new bytes structure around [from, to) in-place.\n assembly {\n result := add(b, from)\n mstore(result, sub(to, from))\n }\n return result;\n }\n\n /// @dev Pops the last byte off of a byte array by modifying its length.\n /// @param b Byte array that will be modified.\n /// @return The byte that was popped off.\n function popLastByte(bytes memory b)\n internal\n pure\n returns (bytes1 result)\n {\n require(\n b.length > 0,\n \"GREATER_THAN_ZERO_LENGTH_REQUIRED\"\n );\n\n // Store last byte.\n result = b[b.length - 1];\n\n assembly {\n // Decrement length of byte array.\n let newLen := sub(mload(b), 1)\n mstore(b, newLen)\n }\n return result;\n }\n\n /// @dev Pops the last 20 bytes off of a byte array by modifying its length.\n /// @param b Byte array that will be modified.\n /// @return The 20 byte address that was popped off.\n function popLast20Bytes(bytes memory b)\n internal\n pure\n returns (address result)\n {\n require(\n b.length >= 20,\n \"GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED\"\n );\n\n // Store last 20 bytes.\n result = readAddress(b, b.length - 20);\n\n assembly {\n // Subtract 20 from byte array length.\n let newLen := sub(mload(b), 20)\n mstore(b, newLen)\n }\n return result;\n }\n\n /// @dev Tests equality of two byte arrays.\n /// @param lhs First byte array to compare.\n /// @param rhs Second byte array to compare.\n /// @return True if arrays are the same. False otherwise.\n function equals(\n bytes memory lhs,\n bytes memory rhs\n )\n internal\n pure\n returns (bool equal)\n {\n // Keccak gas cost is 30 + numWords * 6. This is a cheap way to compare.\n // We early exit on unequal lengths, but keccak would also correctly\n // handle this.\n return lhs.length == rhs.length && keccak256(lhs) == keccak256(rhs);\n }\n\n /// @dev Reads an address from a position in a byte array.\n /// @param b Byte array containing an address.\n /// @param index Index in byte array of address.\n /// @return address from byte array.\n function readAddress(\n bytes memory b,\n uint256 index\n )\n internal\n pure\n returns (address result)\n {\n require(\n b.length >= index + 20, // 20 is length of address\n \"GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED\"\n );\n\n // Add offset to index:\n // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)\n // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)\n index += 20;\n\n // Read address from array memory\n assembly {\n // 1. Add index to address of bytes array\n // 2. Load 32-byte word from memory\n // 3. Apply 20-byte mask to obtain address\n result := and(mload(add(b, index)), 0xffffffffffffffffffffffffffffffffffffffff)\n }\n return result;\n }\n\n /// @dev Writes an address into a specific position in a byte array.\n /// @param b Byte array to insert address into.\n /// @param index Index in byte array of address.\n /// @param input Address to put into byte array.\n function writeAddress(\n bytes memory b,\n uint256 index,\n address input\n )\n internal\n pure\n {\n require(\n b.length >= index + 20, // 20 is length of address\n \"GREATER_OR_EQUAL_TO_20_LENGTH_REQUIRED\"\n );\n\n // Add offset to index:\n // 1. Arrays are prefixed by 32-byte length parameter (add 32 to index)\n // 2. Account for size difference between address length and 32-byte storage word (subtract 12 from index)\n index += 20;\n\n // Store address into array memory\n assembly {\n // The address occupies 20 bytes and mstore stores 32 bytes.\n // First fetch the 32-byte word where we'll be storing the address, then\n // apply a mask so we have only the bytes in the word that the address will not occupy.\n // Then combine these bytes with the address and store the 32 bytes back to memory with mstore.\n\n // 1. Add index to address of bytes array\n // 2. Load 32-byte word from memory\n // 3. Apply 12-byte mask to obtain extra bytes occupying word of memory where we'll store the address\n let neighbors := and(\n mload(add(b, index)),\n 0xffffffffffffffffffffffff0000000000000000000000000000000000000000\n )\n \n // Make sure input address is clean.\n // (Solidity does not guarantee this)\n input := and(input, 0xffffffffffffffffffffffffffffffffffffffff)\n\n // Store the neighbors and address into memory\n mstore(add(b, index), xor(input, neighbors))\n }\n }\n\n /// @dev Reads a bytes32 value from a position in a byte array.\n /// @param b Byte array containing a bytes32 value.\n /// @param index Index in byte array of bytes32 value.\n /// @return bytes32 value from byte array.\n function readBytes32(\n bytes memory b,\n uint256 index\n )\n internal\n pure\n returns (bytes32 result)\n {\n require(\n b.length >= index + 32,\n \"GREATER_OR_EQUAL_TO_32_LENGTH_REQUIRED\"\n );\n\n // Arrays are prefixed by a 256 bit length parameter\n index += 32;\n\n // Read the bytes32 from array memory\n assembly {\n result := mload(add(b, index))\n }\n return result;\n }\n\n /// @dev Writes a bytes32 into a specific position in a byte array.\n /// @param b Byte array to insert <input> into.\n /// @param index Index in byte array of <input>.\n /// @param input bytes32 to put into byte array.\n function writeBytes32(\n bytes memory b,\n uint256 index,\n bytes32 input\n )\n internal\n pure\n {\n require(\n b.length >= index + 32,\n \"GREATER_OR_EQUAL_TO_32_LENGTH_REQUIRED\"\n );\n\n // Arrays are prefixed by a 256 bit length parameter\n index += 32;\n\n // Read the bytes32 from array memory\n assembly {\n mstore(add(b, index), input)\n }\n }\n\n /// @dev Reads a uint256 value from a position in a byte array.\n /// @param b Byte array containing a uint256 value.\n /// @param index Index in byte array of uint256 value.\n /// @return uint256 value from byte array.\n function readUint256(\n bytes memory b,\n uint256 index\n )\n internal\n pure\n returns (uint256 result)\n {\n result = uint256(readBytes32(b, index));\n return result;\n }\n\n /// @dev Writes a uint256 into a specific position in a byte array.\n /// @param b Byte array to insert <input> into.\n /// @param index Index in byte array of <input>.\n /// @param input uint256 to put into byte array.\n function writeUint256(\n bytes memory b,\n uint256 index,\n uint256 input\n )\n internal\n pure\n {\n writeBytes32(b, index, bytes32(input));\n }\n\n /// @dev Reads an unpadded bytes4 value from a position in a byte array.\n /// @param b Byte array containing a bytes4 value.\n /// @param index Index in byte array of bytes4 value.\n /// @return bytes4 value from byte array.\n function readBytes4(\n bytes memory b,\n uint256 index\n )\n internal\n pure\n returns (bytes4 result)\n {\n require(\n b.length >= index + 4,\n \"GREATER_OR_EQUAL_TO_4_LENGTH_REQUIRED\"\n );\n\n // Arrays are prefixed by a 32 byte length field\n index += 32;\n\n // Read the bytes4 from array memory\n assembly {\n result := mload(add(b, index))\n // Solidity does not require us to clean the trailing bytes.\n // We do it anyway\n result := and(result, 0xFFFFFFFF00000000000000000000000000000000000000000000000000000000)\n }\n return result;\n }\n\n /// @dev Reads nested bytes from a specific position.\n /// @dev NOTE: the returned value overlaps with the input value.\n /// Both should be treated as immutable.\n /// @param b Byte array containing nested bytes.\n /// @param index Index of nested bytes.\n /// @return result Nested bytes.\n function readBytesWithLength(\n bytes memory b,\n uint256 index\n )\n internal\n pure\n returns (bytes memory result)\n {\n // Read length of nested bytes\n uint256 nestedBytesLength = readUint256(b, index);\n index += 32;\n\n // Assert length of <b> is valid, given\n // length of nested bytes\n require(\n b.length >= index + nestedBytesLength,\n \"GREATER_OR_EQUAL_TO_NESTED_BYTES_LENGTH_REQUIRED\"\n );\n \n // Return a pointer to the byte array as it exists inside `b`\n assembly {\n result := add(b, index)\n }\n return result;\n }\n\n /// @dev Inserts bytes at a specific position in a byte array.\n /// @param b Byte array to insert <input> into.\n /// @param index Index in byte array of <input>.\n /// @param input bytes to insert.\n function writeBytesWithLength(\n bytes memory b,\n uint256 index,\n bytes memory input\n )\n internal\n pure\n {\n // Assert length of <b> is valid, given\n // length of input\n require(\n b.length >= index + 32 + input.length, // 32 bytes to store length\n \"GREATER_OR_EQUAL_TO_NESTED_BYTES_LENGTH_REQUIRED\"\n );\n\n // Copy <input> into <b>\n memCopy(\n b.contentAddress() + index,\n input.rawAddress(), // includes length of <input>\n input.length + 32 // +32 bytes to store <input> length\n );\n }\n\n /// @dev Performs a deep copy of a byte array onto another byte array of greater than or equal length.\n /// @param dest Byte array that will be overwritten with source bytes.\n /// @param source Byte array to copy onto dest bytes.\n function deepCopyBytes(\n bytes memory dest,\n bytes memory source\n )\n internal\n pure\n {\n uint256 sourceLen = source.length;\n // Dest length must be >= source length, or some bytes would not be copied.\n require(\n dest.length >= sourceLen,\n \"GREATER_OR_EQUAL_TO_SOURCE_BYTES_LENGTH_REQUIRED\"\n );\n memCopy(\n dest.contentAddress(),\n source.contentAddress(),\n sourceLen\n );\n }\n}\n" - }, - "sourceTreeHashHex": "0x4be45134ccdebcf000c4e09f6aed69041411babf993cfba6871e9ad73369122f", - "compiler": { - "name": "solc", - "version": "soljson-v0.4.24+commit.e67f0147.js", - "settings": { - "optimizer": { - "enabled": true, - "runs": 1000000 - }, - "outputSelection": { - "*": { - "*": [ - "abi", - "evm.bytecode.object", - "evm.bytecode.sourceMap", - "evm.deployedBytecode.object", - "evm.deployedBytecode.sourceMap" - ] - } - } - } - }, - "networks": {} -}
\ No newline at end of file + "networks": {} +} |