Merge pull request #1383 from 0xProject/feature/contracts/balanceThresholdFilter

Balance Threshold Filter

19 files changed, 2671 insertions, 3 deletions

diff --git a/contracts/extensions/CHANGELOG.json b/contracts/extensions/CHANGELOG.json
index 19ac770af..da4d9c2ba 100644
--- a/contracts/extensions/CHANGELOG.json
+++ b/contracts/extensions/CHANGELOG.json
@@ -1,5 +1,14 @@
 [
     {
+        "version": "1.1.0",
+        "changes": [
+            {
+                "note": "Added Balance Threshold Filter",
+                "pr": 1383
+            }
+        ]
+    },
+    {
         "timestamp": 1544741676,
         "version": "1.0.2",
         "changes": [
diff --git a/contracts/extensions/compiler.json b/contracts/extensions/compiler.json
index 69d607b3e..e6ed0c215 100644
--- a/contracts/extensions/compiler.json
+++ b/contracts/extensions/compiler.json
@@ -18,5 +18,5 @@
             }
         }
     },
-    "contracts": ["DutchAuction", "Forwarder"]
+    "contracts": ["BalanceThresholdFilter", "DutchAuction", "Forwarder"]
 }
diff --git a/contracts/extensions/contracts/BalanceThresholdFilter/BalanceThresholdFilter.sol b/contracts/extensions/contracts/BalanceThresholdFilter/BalanceThresholdFilter.sol
new file mode 100644
index 000000000..16cacd461
--- /dev/null
+++ b/contracts/extensions/contracts/BalanceThresholdFilter/BalanceThresholdFilter.sol
@@ -0,0 +1,45 @@
+/*
+
+  Copyright 2018 ZeroEx Intl.
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+*/
+
+pragma solidity 0.4.24;
+
+import "@0x/contracts-interfaces/contracts/protocol/Exchange/IExchange.sol";
+import "./interfaces/IThresholdAsset.sol";
+import "./MixinBalanceThresholdFilterCore.sol";
+
+
+contract BalanceThresholdFilter is
+    MixinBalanceThresholdFilterCore
+{
+
+    /// @dev Constructs BalanceThresholdFilter.
+    /// @param exchange Address of 0x exchange.
+    /// @param thresholdAsset The asset that must be held by makers/takers.
+    /// @param balanceThreshold The minimum balance of `thresholdAsset` that must be held by makers/takers.
+    constructor(
+        address exchange,
+        address thresholdAsset,
+        uint256 balanceThreshold
+    )
+        public
+    {
+        EXCHANGE = IExchange(exchange);
+        THRESHOLD_ASSET = IThresholdAsset(thresholdAsset);
+        BALANCE_THRESHOLD = balanceThreshold;
+    }
+}
diff --git a/contracts/extensions/contracts/BalanceThresholdFilter/MixinBalanceThresholdFilterCore.sol b/contracts/extensions/contracts/BalanceThresholdFilter/MixinBalanceThresholdFilterCore.sol
new file mode 100644
index 000000000..df830f36e
--- /dev/null
+++ b/contracts/extensions/contracts/BalanceThresholdFilter/MixinBalanceThresholdFilterCore.sol
@@ -0,0 +1,135 @@
+/*
+
+  Copyright 2018 ZeroEx Intl.
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+*/
+
+pragma solidity 0.4.24;
+
+import "@0x/contracts-libs/contracts/libs/LibExchangeSelectors.sol";
+import "@0x/contracts-libs/contracts/libs/LibOrder.sol";
+import "./mixins/MBalanceThresholdFilterCore.sol";
+import "./MixinExchangeCalldata.sol";
+
+
+contract MixinBalanceThresholdFilterCore is
+    MBalanceThresholdFilterCore,
+    MixinExchangeCalldata,
+    LibOrder,
+    LibExchangeSelectors
+{
+
+    /// @dev Executes an Exchange transaction iff the maker and taker meet 
+    ///      the hold at least `BALANCE_THRESHOLD` of the asset `THRESHOLD_ASSET` OR 
+    ///      the exchange function is a cancellation.
+    ///      Supported Exchange functions:
+    ///          batchFillOrders
+    ///          batchFillOrdersNoThrow
+    ///          batchFillOrKillOrders
+    ///          fillOrder
+    ///          fillOrderNoThrow
+    ///          fillOrKillOrder
+    ///          marketBuyOrders
+    ///          marketBuyOrdersNoThrow
+    ///          marketSellOrders
+    ///          marketSellOrdersNoThrow
+    ///          matchOrders
+    ///          cancelOrder
+    ///          batchCancelOrders
+    ///          cancelOrdersUpTo
+    ///     Trying to call any other exchange function will throw.
+    /// @param salt Arbitrary number to ensure uniqueness of transaction hash.
+    /// @param signerAddress Address of transaction signer.
+    /// @param signedExchangeTransaction AbiV2 encoded calldata.
+    /// @param signature Proof of signer transaction by signer.
+    function executeTransaction(
+        uint256 salt,
+        address signerAddress,
+        bytes signedExchangeTransaction,
+        bytes signature
+    ) 
+        external
+    {
+        // Get accounts whose balances must be validated
+        address[] memory addressesToValidate = getAddressesToValidate(signerAddress);
+
+        // Validate account balances
+        uint256 balanceThreshold = BALANCE_THRESHOLD;
+        IThresholdAsset thresholdAsset = THRESHOLD_ASSET;
+        for (uint256 i = 0; i < addressesToValidate.length; ++i) {
+            uint256 addressBalance = thresholdAsset.balanceOf(addressesToValidate[i]);
+            require(
+                addressBalance >= balanceThreshold,
+                "AT_LEAST_ONE_ADDRESS_DOES_NOT_MEET_BALANCE_THRESHOLD"
+            );
+        }
+        emit ValidatedAddresses(addressesToValidate);
+        
+        // All addresses are valid. Execute exchange function.
+        EXCHANGE.executeTransaction(
+            salt,
+            signerAddress,
+            signedExchangeTransaction,
+            signature
+        );
+    }
+
+    /// @dev Constructs an array of addresses to be validated.
+    ///      Addresses depend on which Exchange function is to be called
+    ///      (defined by `signedExchangeTransaction` above).
+    /// @param signerAddress Address of transaction signer.
+    /// @return addressesToValidate Array of addresses to validate.
+    function getAddressesToValidate(address signerAddress)
+        internal pure
+        returns (address[] memory addressesToValidate)
+    {
+        bytes4 exchangeFunctionSelector = bytes4(exchangeCalldataload(0));
+        // solhint-disable expression-indent
+        if (
+            exchangeFunctionSelector == BATCH_FILL_ORDERS_SELECTOR              ||
+            exchangeFunctionSelector == BATCH_FILL_ORDERS_NO_THROW_SELECTOR     ||
+            exchangeFunctionSelector == BATCH_FILL_OR_KILL_ORDERS_SELECTOR      ||
+            exchangeFunctionSelector == MARKET_BUY_ORDERS_SELECTOR              ||
+            exchangeFunctionSelector == MARKET_BUY_ORDERS_NO_THROW_SELECTOR     ||
+            exchangeFunctionSelector == MARKET_SELL_ORDERS_SELECTOR             ||
+            exchangeFunctionSelector == MARKET_SELL_ORDERS_NO_THROW_SELECTOR
+        ) {
+            addressesToValidate = loadMakerAddressesFromOrderArray(0);
+            addressesToValidate = addressesToValidate.append(signerAddress);
+        } else if (
+            exchangeFunctionSelector == FILL_ORDER_SELECTOR             ||
+            exchangeFunctionSelector == FILL_ORDER_NO_THROW_SELECTOR    ||
+            exchangeFunctionSelector == FILL_OR_KILL_ORDER_SELECTOR
+        ) {
+            address makerAddress = loadMakerAddressFromOrder(0);
+            addressesToValidate = addressesToValidate.append(makerAddress);
+            addressesToValidate = addressesToValidate.append(signerAddress);
+        } else if (exchangeFunctionSelector == MATCH_ORDERS_SELECTOR) {
+            address leftMakerAddress = loadMakerAddressFromOrder(0);
+            addressesToValidate = addressesToValidate.append(leftMakerAddress);
+            address rightMakerAddress = loadMakerAddressFromOrder(1);
+            addressesToValidate = addressesToValidate.append(rightMakerAddress);
+            addressesToValidate = addressesToValidate.append(signerAddress);
+        } else if (
+            exchangeFunctionSelector != CANCEL_ORDER_SELECTOR           &&
+            exchangeFunctionSelector != BATCH_CANCEL_ORDERS_SELECTOR    &&
+            exchangeFunctionSelector != CANCEL_ORDERS_UP_TO_SELECTOR
+        ) {
+            revert("INVALID_OR_BLOCKED_EXCHANGE_SELECTOR");
+        }
+        // solhint-enable expression-indent
+        return addressesToValidate;
+    }
+}
diff --git a/contracts/extensions/contracts/BalanceThresholdFilter/MixinExchangeCalldata.sol b/contracts/extensions/contracts/BalanceThresholdFilter/MixinExchangeCalldata.sol
new file mode 100644
index 000000000..bd26a468f
--- /dev/null
+++ b/contracts/extensions/contracts/BalanceThresholdFilter/MixinExchangeCalldata.sol
@@ -0,0 +1,103 @@
+    
+    /*
+
+  Copyright 2018 ZeroEx Intl.
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+*/
+
+pragma solidity 0.4.24;
+
+import "./mixins/MExchangeCalldata.sol";
+import "@0x/contracts-libs/contracts/libs/LibAddressArray.sol";
+
+
+contract MixinExchangeCalldata is 
+    MExchangeCalldata
+{
+
+    using LibAddressArray for address[];
+
+    /// @dev Emulates the `calldataload` opcode on the embedded Exchange calldata,
+    ///      which is accessed through `signedExchangeTransaction`.
+    /// @param offset  Offset into the Exchange calldata.
+    /// @return value  Corresponding 32 byte value stored at `offset`.
+    function exchangeCalldataload(uint256 offset)
+        internal pure
+        returns (bytes32 value)
+    {
+        assembly {
+            // Pointer to exchange transaction
+            // 0x04 for calldata selector
+            // 0x40 to access `signedExchangeTransaction`, which is the third parameter
+            let exchangeTxPtr := calldataload(0x44)
+
+            // Offset into Exchange calldata
+            // We compute this by adding 0x24 to the `exchangeTxPtr` computed above.
+            // 0x04 for calldata selector
+            // 0x20 for length field of `signedExchangeTransaction`
+            let exchangeCalldataOffset := add(exchangeTxPtr, add(0x24, offset))
+            value := calldataload(exchangeCalldataOffset)
+        }
+        return value;
+    }
+
+    /// @dev Convenience function that skips the 4 byte selector when loading
+    ///      from the embedded Exchange calldata.
+    /// @param offset  Offset into the Exchange calldata (minus the 4 byte selector)
+    /// @return value  Corresponding 32 byte value stored at `offset` + 4.
+    function loadExchangeData(uint256 offset)
+        internal pure
+        returns (bytes32 value)
+    {
+        value = exchangeCalldataload(offset + 4);
+        return value;
+    }
+
+    /// @dev Extracts the maker address from an order stored in the Exchange calldata
+    ///      (which is embedded in `signedExchangeTransaction`).
+    /// @param orderParamIndex  Index of the order in the Exchange function's signature.
+    /// @return makerAddress The extracted maker address.
+    function loadMakerAddressFromOrder(uint256 orderParamIndex)
+        internal pure
+        returns (address makerAddress)
+    {
+        uint256 orderOffsetInBytes = orderParamIndex * 32;
+        uint256 orderPtr = uint256(loadExchangeData(orderOffsetInBytes));
+        makerAddress = address(loadExchangeData(orderPtr));
+        return makerAddress;
+    }
+
+    /// @dev Extracts the maker addresses from an array of orders stored in the Exchange calldata
+    ///      (which is embedded in `signedExchangeTransaction`).
+    /// @param orderArrayParamIndex  Index of the order array in the Exchange function's signature
+    /// @return makerAddresses The extracted maker addresses.
+    function loadMakerAddressesFromOrderArray(uint256 orderArrayParamIndex)
+        internal pure
+        returns (address[] makerAddresses)
+    {
+        uint256 orderArrayOffsetInBytes = orderArrayParamIndex * 32;
+        uint256 orderArrayPtr = uint256(loadExchangeData(orderArrayOffsetInBytes));
+        uint256 orderArrayLength = uint256(loadExchangeData(orderArrayPtr));
+        uint256 orderArrayLengthInBytes = orderArrayLength * 32;
+        uint256 orderArrayElementPtr = orderArrayPtr + 32;
+        uint256 orderArrayElementEndPtr = orderArrayElementPtr + orderArrayLengthInBytes;
+        for (uint orderPtrOffset = orderArrayElementPtr; orderPtrOffset < orderArrayElementEndPtr; orderPtrOffset += 32) {
+            uint256 orderPtr = uint256(loadExchangeData(orderPtrOffset));
+            address makerAddress = address(loadExchangeData(orderPtr + orderArrayElementPtr));
+            makerAddresses = makerAddresses.append(makerAddress);
+        }
+        return makerAddresses;
+    }
+}
diff --git a/contracts/extensions/contracts/BalanceThresholdFilter/interfaces/IBalanceThresholdFilterCore.sol b/contracts/extensions/contracts/BalanceThresholdFilter/interfaces/IBalanceThresholdFilterCore.sol
new file mode 100644
index 000000000..3d8e2bbd1
--- /dev/null
+++ b/contracts/extensions/contracts/BalanceThresholdFilter/interfaces/IBalanceThresholdFilterCore.sol
@@ -0,0 +1,55 @@
+
+/*
+
+  Copyright 2018 ZeroEx Intl.
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+*/
+
+pragma solidity 0.4.24;
+
+
+contract IBalanceThresholdFilterCore {
+    
+    /// @dev Executes an Exchange transaction iff the maker and taker meet 
+    ///      the hold at least `BALANCE_THRESHOLD` of the asset `THRESHOLD_ASSET` OR 
+    ///      the exchange function is a cancellation.
+    ///      Supported Exchange functions:
+    ///         - batchFillOrders
+    ///         - batchFillOrdersNoThrow
+    ///         - batchFillOrKillOrders
+    ///         - fillOrder
+    ///         - fillOrderNoThrow
+    ///         - fillOrKillOrder
+    ///         - marketBuyOrders
+    ///         - marketBuyOrdersNoThrow
+    ///         - marketSellOrders
+    ///         - marketSellOrdersNoThrow
+    ///         - matchOrders
+    ///         - cancelOrder
+    ///         - batchCancelOrders
+    ///         - cancelOrdersUpTo
+    ///     Trying to call any other exchange function will throw.
+    /// @param salt Arbitrary number to ensure uniqueness of transaction hash.
+    /// @param signerAddress Address of transaction signer.
+    /// @param signedExchangeTransaction AbiV2 encoded calldata.
+    /// @param signature Proof of signer transaction by signer.
+    function executeTransaction(
+        uint256 salt,
+        address signerAddress,
+        bytes signedExchangeTransaction,
+        bytes signature
+    ) 
+        external;
+}
diff --git a/contracts/extensions/contracts/BalanceThresholdFilter/interfaces/IThresholdAsset.sol b/contracts/extensions/contracts/BalanceThresholdFilter/interfaces/IThresholdAsset.sol
new file mode 100644
index 000000000..3e424b9f4
--- /dev/null
+++ b/contracts/extensions/contracts/BalanceThresholdFilter/interfaces/IThresholdAsset.sol
@@ -0,0 +1,31 @@
+/*
+
+  Copyright 2018 ZeroEx Intl.
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+*/
+
+pragma solidity 0.4.24;
+
+
+contract IThresholdAsset {
+
+    /// @param _owner The address from which the balance will be retrieved
+    /// @return Balance of owner
+    function balanceOf(address _owner)
+        external
+        view
+        returns (uint256);
+
+}
diff --git a/contracts/extensions/contracts/BalanceThresholdFilter/mixins/MBalanceThresholdFilterCore.sol b/contracts/extensions/contracts/BalanceThresholdFilter/mixins/MBalanceThresholdFilterCore.sol
new file mode 100644
index 000000000..b8b67e6ee
--- /dev/null
+++ b/contracts/extensions/contracts/BalanceThresholdFilter/mixins/MBalanceThresholdFilterCore.sol
@@ -0,0 +1,54 @@
+/*
+
+  Copyright 2018 ZeroEx Intl.
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+*/
+
+pragma solidity 0.4.24;
+
+import "@0x/contracts-interfaces/contracts/protocol/Exchange/IExchange.sol";
+import "../interfaces/IThresholdAsset.sol";
+import "../interfaces/IBalanceThresholdFilterCore.sol";
+
+
+contract MBalanceThresholdFilterCore is
+    IBalanceThresholdFilterCore
+{
+
+    // Points to 0x exchange contract
+    // solhint-disable var-name-mixedcase
+    IExchange internal EXCHANGE;
+
+    // The asset that must be held by makers/takers
+    IThresholdAsset internal THRESHOLD_ASSET;
+
+    // The minimum balance of `THRESHOLD_ASSET` that must be held by makers/takers
+    uint256 internal BALANCE_THRESHOLD;
+    // solhint-enable var-name-mixedcase
+
+    // Addresses that hold at least `BALANCE_THRESHOLD` of `THRESHOLD_ASSET`
+    event ValidatedAddresses (
+        address[] addresses
+    );
+
+    /// @dev Constructs an array of addresses to be validated.
+    ///      Addresses depend on which Exchange function is to be called
+    ///      (defined by `signedExchangeTransaction` above).
+    /// @param signerAddress Address of transaction signer.
+    /// @return addressesToValidate Array of addresses to validate.
+    function getAddressesToValidate(address signerAddress)
+        internal pure
+        returns (address[] memory addressesToValidate);
+}
diff --git a/contracts/extensions/contracts/BalanceThresholdFilter/mixins/MExchangeCalldata.sol b/contracts/extensions/contracts/BalanceThresholdFilter/mixins/MExchangeCalldata.sol
new file mode 100644
index 000000000..bf2940fe1
--- /dev/null
+++ b/contracts/extensions/contracts/BalanceThresholdFilter/mixins/MExchangeCalldata.sol
@@ -0,0 +1,56 @@
+    
+    /*
+
+  Copyright 2018 ZeroEx Intl.
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+*/
+
+pragma solidity 0.4.24;
+
+
+contract MExchangeCalldata {
+
+    /// @dev Emulates the `calldataload` opcode on the embedded Exchange calldata,
+    ///      which is accessed through `signedExchangeTransaction`.
+    /// @param offset  Offset into the Exchange calldata.
+    /// @return value  Corresponding 32 byte value stored at `offset`.
+    function exchangeCalldataload(uint256 offset)
+        internal pure
+        returns (bytes32 value);
+
+    /// @dev Convenience function that skips the 4 byte selector when loading
+    ///      from the embedded Exchange calldata.
+    /// @param offset  Offset into the Exchange calldata (minus the 4 byte selector)
+    /// @return value  Corresponding 32 byte value stored at `offset` + 4.
+    function loadExchangeData(uint256 offset)
+        internal pure
+        returns (bytes32 value);
+
+    /// @dev Extracts the maker address from an order stored in the Exchange calldata
+    ///      (which is embedded in `signedExchangeTransaction`).
+    /// @param orderParamIndex  Index of the order in the Exchange function's signature.
+    /// @return makerAddress The extracted maker address.
+    function loadMakerAddressFromOrder(uint256 orderParamIndex)
+        internal pure
+        returns (address makerAddress);
+
+    /// @dev Extracts the maker addresses from an array of orders stored in the Exchange calldata
+    ///      (which is embedded in `signedExchangeTransaction`).
+    /// @param orderArrayParamIndex  Index of the order array in the Exchange function's signature
+    /// @return makerAddresses The extracted maker addresses.
+    function loadMakerAddressesFromOrderArray(uint256 orderArrayParamIndex)
+        internal pure
+        returns (address[] makerAddresses);
+}
diff --git a/contracts/extensions/package.json b/contracts/extensions/package.json
index 938e1138c..2d9ed4dcd 100644
--- a/contracts/extensions/package.json
+++ b/contracts/extensions/package.json
@@ -31,7 +31,7 @@
         "lint-contracts": "solhint -c ../.solhint.json contracts/**/**/**/**/*.sol"
     },
     "config": {
-        "abis": "generated-artifacts/@(DutchAuction|Forwarder).json"
+        "abis": "generated-artifacts/@(BalanceThresholdFilter|DutchAuction|Forwarder).json"
     },
     "repository": {
         "type": "git",
diff --git a/contracts/extensions/src/artifacts/index.ts b/contracts/extensions/src/artifacts/index.ts
index 7588178f0..ebf0b8050 100644
--- a/contracts/extensions/src/artifacts/index.ts
+++ b/contracts/extensions/src/artifacts/index.ts
@@ -1,9 +1,11 @@
 import { ContractArtifact } from 'ethereum-types';
 
+import * as BalanceThresholdFilter from '../../generated-artifacts/BalanceThresholdFilter.json';
 import * as DutchAuction from '../../generated-artifacts/DutchAuction.json';
 import * as Forwarder from '../../generated-artifacts/Forwarder.json';
 
 export const artifacts = {
+    BalanceThresholdFilter: BalanceThresholdFilter as ContractArtifact,
     DutchAuction: DutchAuction as ContractArtifact,
     Forwarder: Forwarder as ContractArtifact,
 };
diff --git a/contracts/extensions/src/wrappers/index.ts b/contracts/extensions/src/wrappers/index.ts
index 90880e37f..8a8122caa 100644
--- a/contracts/extensions/src/wrappers/index.ts
+++ b/contracts/extensions/src/wrappers/index.ts
@@ -1,2 +1,3 @@
+export * from '../../generated-wrappers/balance_threshold_filter';
 export * from '../../generated-wrappers/dutch_auction';
 export * from '../../generated-wrappers/forwarder';
diff --git a/contracts/extensions/test/extensions/balance_threshold_filter.ts b/contracts/extensions/test/extensions/balance_threshold_filter.ts
new file mode 100644
index 000000000..07199d60b
--- /dev/null
+++ b/contracts/extensions/test/extensions/balance_threshold_filter.ts
@@ -0,0 +1,1644 @@
+import { BlockchainLifecycle } from '@0x/dev-utils';
+import { assetDataUtils } from '@0x/order-utils';
+import { Order, RevertReason, SignedOrder } from '@0x/types';
+import { BigNumber } from '@0x/utils';
+import { Web3Wrapper } from '@0x/web3-wrapper';
+import * as chai from 'chai';
+import { TransactionReceiptWithDecodedLogs } from 'ethereum-types';
+import * as _ from 'lodash';
+
+import {
+    artifacts as protocolArtifacts,
+    ERC20Wrapper,
+    ERC721Wrapper,
+    ExchangeContract,
+    ExchangeWrapper,
+} from '@0x/contracts-protocol';
+import {
+    chaiSetup,
+    constants,
+    ContractName,
+    ERC20BalancesByOwner,
+    expectTransactionFailedAsync,
+    OrderFactory,
+    OrderStatus,
+    provider,
+    TransactionFactory,
+    txDefaults,
+    web3Wrapper,
+} from '@0x/contracts-test-utils';
+import { DummyERC20TokenContract } from '@0x/contracts-tokens';
+
+import { BalanceThresholdFilterContract } from '../../generated-wrappers/balance_threshold_filter';
+import { artifacts } from '../../src/artifacts';
+import { BalanceThresholdWrapper } from '../utils/balance_threshold_wrapper';
+
+chaiSetup.configure();
+const expect = chai.expect;
+const blockchainLifecycle = new BlockchainLifecycle(web3Wrapper);
+const DECIMALS_DEFAULT = 18;
+
+interface ValidatedAddressesLog {
+    args: { addresses: string[] };
+}
+
+describe(ContractName.BalanceThresholdFilter, () => {
+    const takerAssetAmount = Web3Wrapper.toBaseUnitAmount(new BigNumber(500), DECIMALS_DEFAULT);
+    const makerAssetAmount = Web3Wrapper.toBaseUnitAmount(new BigNumber(1000), DECIMALS_DEFAULT);
+    const takerAssetFillAmount = Web3Wrapper.toBaseUnitAmount(new BigNumber(250), DECIMALS_DEFAULT);
+
+    let validMakerAddress: string;
+    let validMakerAddress2: string;
+    let owner: string;
+    let validTakerAddress: string;
+    let feeRecipientAddress: string;
+    let invalidAddress: string;
+    let defaultMakerAssetAddress: string;
+    let defaultTakerAssetAddress: string;
+    let zrxAssetData: string;
+    let zrxToken: DummyERC20TokenContract;
+    let exchangeInstance: ExchangeContract;
+    let exchangeWrapper: ExchangeWrapper;
+
+    let orderFactory: OrderFactory;
+    let orderFactory2: OrderFactory;
+    let invalidOrderFactory: OrderFactory;
+    let erc20Wrapper: ERC20Wrapper;
+    let erc20Balances: ERC20BalancesByOwner;
+    let erc20TakerBalanceThresholdWrapper: BalanceThresholdWrapper;
+    let erc721TakerBalanceThresholdWrapper: BalanceThresholdWrapper;
+    let erc721MakerBalanceThresholdWrapper: BalanceThresholdWrapper;
+    let erc721NonValidBalanceThresholdWrapper: BalanceThresholdWrapper;
+
+    let defaultOrderParams: Partial<Order>;
+    let validSignedOrder: SignedOrder;
+    let validSignedOrder2: SignedOrder;
+
+    let erc721BalanceThresholdFilterInstance: BalanceThresholdFilterContract;
+    let erc20BalanceThresholdFilterInstance: BalanceThresholdFilterContract;
+
+    const assertValidatedAddressesLog = async (
+        txReceipt: TransactionReceiptWithDecodedLogs,
+        expectedValidatedAddresses: string[],
+    ) => {
+        expect(txReceipt.logs.length).to.be.gte(1);
+        const validatedAddressesLog = (txReceipt.logs[0] as any) as ValidatedAddressesLog;
+        const validatedAddresses = validatedAddressesLog.args.addresses;
+        // @HACK-hysz: Nested addresses are not translated to lower-case but this will change once
+        //             the new ABI Encoder/Decoder is used by the contract templates.
+        const validatedAddressesNormalized: string[] = [];
+        _.each(validatedAddresses, address => {
+            const normalizedAddress = _.toLower(address);
+            validatedAddressesNormalized.push(normalizedAddress);
+        });
+        expect(validatedAddressesNormalized).to.be.deep.equal(expectedValidatedAddresses);
+    };
+
+    before(async () => {
+        // Create accounts
+        await blockchainLifecycle.startAsync();
+        const accounts = await web3Wrapper.getAvailableAddressesAsync();
+        const usedAddresses = ([
+            owner,
+            validMakerAddress,
+            validMakerAddress2,
+            validTakerAddress,
+            feeRecipientAddress,
+            invalidAddress,
+        ] = accounts);
+        const takerPrivateKey = constants.TESTRPC_PRIVATE_KEYS[accounts.indexOf(validTakerAddress)];
+        const makerPrivateKey = constants.TESTRPC_PRIVATE_KEYS[accounts.indexOf(validMakerAddress)];
+        const secondMakerPrivateKey = constants.TESTRPC_PRIVATE_KEYS[accounts.indexOf(validMakerAddress2)];
+        const invalidAddressPrivateKey = constants.TESTRPC_PRIVATE_KEYS[accounts.indexOf(invalidAddress)];
+        // Create wrappers
+        erc20Wrapper = new ERC20Wrapper(provider, usedAddresses, owner);
+        const validAddresses = _.cloneDeepWith(usedAddresses);
+        _.remove(validAddresses, (address: string) => {
+            return address === invalidAddress;
+        });
+        const erc721Wrapper = new ERC721Wrapper(provider, validAddresses, owner);
+        // Deploy ERC20 tokens
+        const numDummyErc20ToDeploy = 4;
+        let erc20TokenA: DummyERC20TokenContract;
+        let erc20TokenB: DummyERC20TokenContract;
+        let erc20BalanceThresholdAsset: DummyERC20TokenContract;
+        [erc20TokenA, erc20TokenB, zrxToken, erc20BalanceThresholdAsset] = await erc20Wrapper.deployDummyTokensAsync(
+            numDummyErc20ToDeploy,
+            constants.DUMMY_TOKEN_DECIMALS,
+        );
+        defaultMakerAssetAddress = erc20TokenA.address;
+        defaultTakerAssetAddress = erc20TokenB.address;
+        zrxAssetData = assetDataUtils.encodeERC20AssetData(zrxToken.address);
+        // Create proxies
+        const erc20Proxy = await erc20Wrapper.deployProxyAsync();
+        await erc20Wrapper.setBalancesAndAllowancesAsync();
+        // Deploy Exchange contract
+        exchangeInstance = await ExchangeContract.deployFrom0xArtifactAsync(
+            protocolArtifacts.Exchange,
+            provider,
+            txDefaults,
+            zrxAssetData,
+        );
+        exchangeWrapper = new ExchangeWrapper(exchangeInstance, provider);
+        // Register proxies
+        await exchangeWrapper.registerAssetProxyAsync(erc20Proxy.address, owner);
+        await erc20Proxy.addAuthorizedAddress.sendTransactionAsync(exchangeInstance.address, {
+            from: owner,
+        });
+        // Deploy Balance Threshold Filters
+        // One uses an ERC721 token as its balance threshold asset; the other uses an ERC20
+        const erc721alanceThreshold = new BigNumber(1);
+        await erc721Wrapper.deployProxyAsync();
+        const [erc721BalanceThresholdAsset] = await erc721Wrapper.deployDummyTokensAsync();
+        await erc721Wrapper.setBalancesAndAllowancesAsync();
+        erc721BalanceThresholdFilterInstance = await BalanceThresholdFilterContract.deployFrom0xArtifactAsync(
+            artifacts.BalanceThresholdFilter,
+            provider,
+            txDefaults,
+            exchangeInstance.address,
+            erc721BalanceThresholdAsset.address,
+            erc721alanceThreshold,
+        );
+        const erc20BalanceThreshold = Web3Wrapper.toBaseUnitAmount(new BigNumber(1), 10);
+        erc20BalanceThresholdFilterInstance = await BalanceThresholdFilterContract.deployFrom0xArtifactAsync(
+            artifacts.BalanceThresholdFilter,
+            provider,
+            txDefaults,
+            exchangeInstance.address,
+            erc20BalanceThresholdAsset.address,
+            erc20BalanceThreshold,
+        );
+        // Default order parameters
+        defaultOrderParams = {
+            exchangeAddress: exchangeInstance.address,
+            feeRecipientAddress,
+            makerAssetData: assetDataUtils.encodeERC20AssetData(defaultMakerAssetAddress),
+            takerAssetData: assetDataUtils.encodeERC20AssetData(defaultTakerAssetAddress),
+            makerAssetAmount,
+            takerAssetAmount,
+            makerFee: Web3Wrapper.toBaseUnitAmount(new BigNumber(100), DECIMALS_DEFAULT),
+            takerFee: Web3Wrapper.toBaseUnitAmount(new BigNumber(150), DECIMALS_DEFAULT),
+            senderAddress: erc721BalanceThresholdFilterInstance.address,
+        };
+        // Create two order factories with valid makers (who meet the threshold balance), and
+        // one factory for an invalid address (that does not meet the threshold balance)
+        // Valid order factory #1
+        const defaultOrderParams1 = {
+            makerAddress: validMakerAddress,
+            ...defaultOrderParams,
+        };
+        orderFactory = new OrderFactory(makerPrivateKey, defaultOrderParams1);
+        // Valid order factory #2
+        const defaultOrderParams2 = {
+            makerAddress: validMakerAddress2,
+            ...defaultOrderParams,
+        };
+        orderFactory2 = new OrderFactory(secondMakerPrivateKey, defaultOrderParams2);
+        // Invalid order factory
+        const defaultNonValidOrderParams = {
+            makerAddress: invalidAddress,
+            ...defaultOrderParams,
+        };
+        invalidOrderFactory = new OrderFactory(invalidAddressPrivateKey, defaultNonValidOrderParams);
+        // Create Balance Thresold Wrappers
+        erc20TakerBalanceThresholdWrapper = new BalanceThresholdWrapper(
+            erc20BalanceThresholdFilterInstance,
+            exchangeInstance,
+            new TransactionFactory(takerPrivateKey, exchangeInstance.address),
+            provider,
+        );
+        erc721TakerBalanceThresholdWrapper = new BalanceThresholdWrapper(
+            erc721BalanceThresholdFilterInstance,
+            exchangeInstance,
+            new TransactionFactory(takerPrivateKey, exchangeInstance.address),
+            provider,
+        );
+        erc721MakerBalanceThresholdWrapper = new BalanceThresholdWrapper(
+            erc721BalanceThresholdFilterInstance,
+            exchangeInstance,
+            new TransactionFactory(makerPrivateKey, exchangeInstance.address),
+            provider,
+        );
+        erc721NonValidBalanceThresholdWrapper = new BalanceThresholdWrapper(
+            erc721BalanceThresholdFilterInstance,
+            exchangeInstance,
+            new TransactionFactory(invalidAddressPrivateKey, exchangeInstance.address),
+            provider,
+        );
+    });
+    beforeEach(async () => {
+        await blockchainLifecycle.startAsync();
+    });
+    afterEach(async () => {
+        await blockchainLifecycle.revertAsync();
+    });
+
+    describe('General Sanity Checks', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+            validSignedOrder2 = await orderFactory2.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both maker/taker when both maker and taker exceed the balance threshold of an ERC20 token', async () => {
+            const validSignedOrderERC20Sender = await orderFactory.newSignedOrderAsync({
+                ...defaultOrderParams,
+                makerAddress: validMakerAddress,
+                senderAddress: erc20TakerBalanceThresholdWrapper.getBalanceThresholdAddress(),
+            });
+            // Execute a valid fill
+            const txReceipt = await erc20TakerBalanceThresholdWrapper.fillOrderAsync(
+                validSignedOrderERC20Sender,
+                validTakerAddress,
+                { takerAssetFillAmount },
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [validSignedOrder.makerAddress, validTakerAddress];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const makerAssetFillAmount = takerAssetFillAmount
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const makerFeePaid = validSignedOrder.makerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(makerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(makerFeePaid),
+            );
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(takerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(makerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address].add(makerFeePaid.add(takerFeePaid)),
+            );
+        });
+        it('should revert if the Exchange transaction function is not supported', async () => {
+            // Create signed order without the fillOrder function selector
+            const salt = new BigNumber(0);
+            const badSelectorHex = '0x00000000';
+            const signatureHex = '0x';
+            // Call valid forwarder
+            return expectTransactionFailedAsync(
+                erc721BalanceThresholdFilterInstance.executeTransaction.sendTransactionAsync(
+                    salt,
+                    validTakerAddress,
+                    badSelectorHex,
+                    signatureHex,
+                ),
+                RevertReason.InvalidOrBlockedExchangeSelector,
+            );
+        });
+        it('should revert if senderAddress is not set to the valid forwarding contract', async () => {
+            // Create signed order with incorrect senderAddress
+            const notBalanceThresholdFilterAddress = zrxToken.address;
+            const signedOrderWithBadSenderAddress = await orderFactory.newSignedOrderAsync({
+                senderAddress: notBalanceThresholdFilterAddress,
+            });
+            // Call valid forwarder
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.fillOrderAsync(signedOrderWithBadSenderAddress, validTakerAddress, {
+                    takerAssetFillAmount,
+                }),
+                RevertReason.FailedExecution,
+            );
+        });
+    });
+
+    describe('batchFillOrders', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+            validSignedOrder2 = await orderFactory2.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both makers/taker when both maker and taker meet the balance threshold', async () => {
+            // Execute a valid fill
+            const orders = [validSignedOrder, validSignedOrder2];
+            const takerAssetFillAmounts = [takerAssetFillAmount, takerAssetFillAmount];
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.batchFillOrdersAsync(orders, validTakerAddress, {
+                takerAssetFillAmounts,
+            });
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [
+                validSignedOrder.makerAddress,
+                validSignedOrder2.makerAddress,
+                validTakerAddress,
+            ];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const cumulativeTakerAssetFillAmount = takerAssetFillAmount.times(2);
+            const makerAssetFillAmount = takerAssetFillAmount
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const makerFeePaid = validSignedOrder.makerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount)
+                .times(2);
+            // Maker #1
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(makerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(makerFeePaid),
+            );
+            // Maker #2
+            expect(newBalances[validMakerAddress2][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultMakerAssetAddress].minus(makerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress2][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress2][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][zrxToken.address].minus(makerFeePaid),
+            );
+            // Taker
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(cumulativeTakerAssetFillAmount),
+            );
+
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(makerAssetFillAmount.times(2)),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            // Fee recipient
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address].add(makerFeePaid.times(2).add(takerFeePaid)),
+            );
+        });
+        it('should revert if one maker does not meet the balance threshold', async () => {
+            // Create order set with one non-valid maker address
+            const takerAssetFillAmounts = [takerAssetFillAmount, takerAssetFillAmount];
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                makerAddress: invalidAddress,
+            });
+            const orders = [validSignedOrder, signedOrderWithBadMakerAddress];
+            // Execute transaction
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.batchFillOrdersAsync(orders, validTakerAddress, {
+                    takerAssetFillAmounts,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            const orders = [validSignedOrder, validSignedOrder2];
+            const takerAssetFillAmounts = [takerAssetFillAmount, takerAssetFillAmount];
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.batchFillOrdersAsync(orders, invalidAddress, {
+                    takerAssetFillAmounts,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+    });
+
+    describe('batchFillOrdersNoThrow', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+            validSignedOrder2 = await orderFactory2.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both makers/taker when both maker and taker meet the balance threshold', async () => {
+            // Execute a valid fill
+            const orders = [validSignedOrder, validSignedOrder2];
+            const takerAssetFillAmounts = [takerAssetFillAmount, takerAssetFillAmount];
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.batchFillOrdersNoThrowAsync(
+                orders,
+                validTakerAddress,
+                {
+                    takerAssetFillAmounts,
+                    // HACK(albrow): We need to hardcode the gas estimate here because
+                    // the Geth gas estimator doesn't work with the way we use
+                    // delegatecall and swallow errors.
+                    gas: 600000,
+                },
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [
+                validSignedOrder.makerAddress,
+                validSignedOrder2.makerAddress,
+                validTakerAddress,
+            ];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const cumulativeTakerAssetFillAmount = takerAssetFillAmount.times(2);
+            const makerAssetFillAmount = takerAssetFillAmount
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const makerFeePaid = validSignedOrder.makerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount)
+                .times(2);
+            // Maker #1
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(makerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(makerFeePaid),
+            );
+            // Maker #2
+            expect(newBalances[validMakerAddress2][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultMakerAssetAddress].minus(makerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress2][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress2][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][zrxToken.address].minus(makerFeePaid),
+            );
+            // Taker
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(cumulativeTakerAssetFillAmount),
+            );
+
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(makerAssetFillAmount.times(2)),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            // Fee recipient
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address].add(makerFeePaid.times(2).add(takerFeePaid)),
+            );
+        });
+        it('should revert if one maker does not meet the balance threshold', async () => {
+            // Create order set with one non-valid maker address
+            const takerAssetFillAmounts = [takerAssetFillAmount, takerAssetFillAmount];
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                makerAddress: invalidAddress,
+            });
+            const orders = [validSignedOrder, signedOrderWithBadMakerAddress];
+            // Execute transaction
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.batchFillOrdersNoThrowAsync(orders, validTakerAddress, {
+                    takerAssetFillAmounts,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            const orders = [validSignedOrder, validSignedOrder2];
+            const takerAssetFillAmounts = [takerAssetFillAmount, takerAssetFillAmount];
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.batchFillOrdersNoThrowAsync(orders, invalidAddress, {
+                    takerAssetFillAmounts,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+    });
+
+    describe('batchFillOrKillOrders', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+            validSignedOrder2 = await orderFactory2.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both makers/taker when both makers and taker meet the balance threshold', async () => {
+            // Execute a valid fill
+            const orders = [validSignedOrder, validSignedOrder2];
+            const takerAssetFillAmounts = [takerAssetFillAmount, takerAssetFillAmount];
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.batchFillOrKillOrdersAsync(
+                orders,
+                validTakerAddress,
+                { takerAssetFillAmounts },
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [
+                validSignedOrder.makerAddress,
+                validSignedOrder2.makerAddress,
+                validTakerAddress,
+            ];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const cumulativeTakerAssetFillAmount = takerAssetFillAmount.times(2);
+            const makerAssetFillAmount = takerAssetFillAmount
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const makerFeePaid = validSignedOrder.makerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount)
+                .times(2);
+            // Maker #1
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(makerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(makerFeePaid),
+            );
+            // Maker #2
+            expect(newBalances[validMakerAddress2][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultMakerAssetAddress].minus(makerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress2][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress2][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][zrxToken.address].minus(makerFeePaid),
+            );
+            // Taker
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(cumulativeTakerAssetFillAmount),
+            );
+
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(makerAssetFillAmount.times(2)),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            // Fee recipient
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address].add(makerFeePaid.times(2).add(takerFeePaid)),
+            );
+        });
+        it('should revert if one maker does not meet the balance threshold', async () => {
+            // Create order set with one non-valid maker address
+            const takerAssetFillAmounts = [takerAssetFillAmount, takerAssetFillAmount];
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                makerAddress: invalidAddress,
+            });
+            const orders = [validSignedOrder, signedOrderWithBadMakerAddress];
+            // Execute transaction
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.batchFillOrKillOrdersAsync(orders, validTakerAddress, {
+                    takerAssetFillAmounts,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            const orders = [validSignedOrder, validSignedOrder2];
+            const takerAssetFillAmounts = [takerAssetFillAmount, takerAssetFillAmount];
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.batchFillOrKillOrdersAsync(orders, invalidAddress, {
+                    takerAssetFillAmounts,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if one takerAssetFillAmount is not fully filled', async () => {
+            const tooBigTakerAssetFillAmount = validSignedOrder.takerAssetAmount.times(2);
+            const orders = [validSignedOrder, validSignedOrder2];
+            const takerAssetFillAmounts = [takerAssetFillAmount, tooBigTakerAssetFillAmount];
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.batchFillOrKillOrdersAsync(orders, validTakerAddress, {
+                    takerAssetFillAmounts,
+                }),
+                RevertReason.FailedExecution,
+            );
+        });
+    });
+
+    describe('fillOrder', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both maker/taker when both maker and taker meet the balance threshold', async () => {
+            // Execute a valid fill
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.fillOrderAsync(
+                validSignedOrder,
+                validTakerAddress,
+                { takerAssetFillAmount },
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [validSignedOrder.makerAddress, validTakerAddress];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const makerAssetFillAmount = takerAssetFillAmount
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const makerFeePaid = validSignedOrder.makerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(makerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(makerFeePaid),
+            );
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(takerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(makerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address].add(makerFeePaid.add(takerFeePaid)),
+            );
+        });
+        it('should revert if maker does not meet the balance threshold', async () => {
+            // Create signed order with non-valid maker address
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                senderAddress: erc721BalanceThresholdFilterInstance.address,
+                makerAddress: invalidAddress,
+            });
+            // Execute transaction
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.fillOrderAsync(signedOrderWithBadMakerAddress, validTakerAddress, {
+                    takerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.fillOrderAsync(validSignedOrder, invalidAddress, {
+                    takerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+    });
+
+    describe('fillOrderNoThrow', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both maker/taker when both maker and taker meet the balance threshold', async () => {
+            // Execute a valid fill
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.fillOrderNoThrowAsync(
+                validSignedOrder,
+                validTakerAddress,
+                {
+                    takerAssetFillAmount,
+                    // HACK(albrow): We need to hardcode the gas estimate here because
+                    // the Geth gas estimator doesn't work with the way we use
+                    // delegatecall and swallow errors.
+                    gas: 600000,
+                },
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [validSignedOrder.makerAddress, validTakerAddress];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const makerAssetFillAmount = takerAssetFillAmount
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const makerFeePaid = validSignedOrder.makerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(makerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(makerFeePaid),
+            );
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(takerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(makerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address].add(makerFeePaid.add(takerFeePaid)),
+            );
+        });
+        it('should revert if maker does not meet the balance threshold', async () => {
+            // Create signed order with non-valid maker address
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                senderAddress: erc721BalanceThresholdFilterInstance.address,
+                makerAddress: invalidAddress,
+            });
+            // Execute transaction
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.fillOrderNoThrowAsync(
+                    signedOrderWithBadMakerAddress,
+                    validTakerAddress,
+                    { takerAssetFillAmount },
+                ),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.fillOrderNoThrowAsync(validSignedOrder, invalidAddress, {
+                    takerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+    });
+
+    describe('fillOrKillOrder', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both maker/taker when both maker and taker meet the balance threshold', async () => {
+            // Execute a valid fill
+            const takerAssetFillAmount_ = validSignedOrder.takerAssetAmount;
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.fillOrKillOrderAsync(
+                validSignedOrder,
+                validTakerAddress,
+                { takerAssetFillAmount: takerAssetFillAmount_ },
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [validSignedOrder.makerAddress, validTakerAddress];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const makerAssetFillAmount = takerAssetFillAmount_
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const makerFeePaid = validSignedOrder.makerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee
+                .times(makerAssetFillAmount)
+                .dividedToIntegerBy(validSignedOrder.makerAssetAmount);
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(makerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(takerAssetFillAmount_),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(makerFeePaid),
+            );
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(takerAssetFillAmount_),
+            );
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(makerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address].add(makerFeePaid.add(takerFeePaid)),
+            );
+        });
+        it('should revert if maker does not meet the balance threshold', async () => {
+            // Create signed order with non-valid maker address
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                senderAddress: erc721BalanceThresholdFilterInstance.address,
+                makerAddress: invalidAddress,
+            });
+            // Execute transaction
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.fillOrKillOrderAsync(
+                    signedOrderWithBadMakerAddress,
+                    validTakerAddress,
+                    { takerAssetFillAmount },
+                ),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.fillOrKillOrderAsync(validSignedOrder, invalidAddress, {
+                    takerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if takerAssetFillAmount is not fully filled', async () => {
+            const tooBigTakerAssetFillAmount = validSignedOrder.takerAssetAmount.times(2);
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.fillOrKillOrderAsync(validSignedOrder, validTakerAddress, {
+                    takerAssetFillAmount: tooBigTakerAssetFillAmount,
+                }),
+                RevertReason.FailedExecution,
+            );
+        });
+    });
+
+    describe('marketSellOrders', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+            validSignedOrder2 = await orderFactory2.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both makers/taker when both makers and taker meet the balance threshold', async () => {
+            // Execute a valid fill
+            const orders = [validSignedOrder, validSignedOrder2];
+            const cumulativeTakerAssetFillAmount = validSignedOrder.takerAssetAmount.plus(takerAssetFillAmount);
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.marketSellOrdersAsync(
+                orders,
+                validTakerAddress,
+                { takerAssetFillAmount: cumulativeTakerAssetFillAmount },
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [
+                validSignedOrder.makerAddress,
+                validSignedOrder2.makerAddress,
+                validTakerAddress,
+            ];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const makerAssetFillAmount2 = takerAssetFillAmount
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const makerFeePaid2 = validSignedOrder2.makerFee
+                .times(makerAssetFillAmount2)
+                .dividedToIntegerBy(validSignedOrder2.makerAssetAmount);
+            const takerFeePaid2 = validSignedOrder2.takerFee
+                .times(makerAssetFillAmount2)
+                .dividedToIntegerBy(validSignedOrder2.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee.plus(takerFeePaid2);
+            const cumulativeMakerAssetFillAmount = validSignedOrder.makerAssetAmount.plus(makerAssetFillAmount2);
+            // Maker #1
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(validSignedOrder.makerAssetAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(validSignedOrder.takerAssetAmount),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(validSignedOrder.makerFee),
+            );
+            // Maker #2
+            expect(newBalances[validMakerAddress2][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultMakerAssetAddress].minus(makerAssetFillAmount2),
+            );
+            expect(newBalances[validMakerAddress2][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress2][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][zrxToken.address].minus(makerFeePaid2),
+            );
+            // Taker
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(cumulativeTakerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(cumulativeMakerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            // Fee recipient
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address]
+                    .add(validSignedOrder.makerFee)
+                    .add(makerFeePaid2)
+                    .add(takerFeePaid),
+            );
+        });
+        it('should revert if one maker does not meet the balance threshold', async () => {
+            // Create order set with one non-valid maker address
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                makerAddress: invalidAddress,
+            });
+            const orders = [validSignedOrder, signedOrderWithBadMakerAddress];
+            // Execute transaction
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.marketSellOrdersAsync(orders, validTakerAddress, {
+                    takerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            const orders = [validSignedOrder, validSignedOrder2];
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.marketSellOrdersAsync(orders, invalidAddress, {
+                    takerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+    });
+
+    describe('marketSellOrdersNoThrow', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+            validSignedOrder2 = await orderFactory2.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both makers/taker when both makers and taker meet the balance threshold', async () => {
+            // Execute a valid fill
+            const orders = [validSignedOrder, validSignedOrder2];
+            const cumulativeTakerAssetFillAmount = validSignedOrder.takerAssetAmount.plus(takerAssetFillAmount);
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.marketSellOrdersNoThrowAsync(
+                orders,
+                validTakerAddress,
+                {
+                    takerAssetFillAmount: cumulativeTakerAssetFillAmount,
+                    // HACK(albrow): We need to hardcode the gas estimate here because
+                    // the Geth gas estimator doesn't work with the way we use
+                    // delegatecall and swallow errors.
+                    gas: 600000,
+                },
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [
+                validSignedOrder.makerAddress,
+                validSignedOrder2.makerAddress,
+                validTakerAddress,
+            ];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const makerAssetFillAmount2 = takerAssetFillAmount
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const makerFeePaid2 = validSignedOrder2.makerFee
+                .times(makerAssetFillAmount2)
+                .dividedToIntegerBy(validSignedOrder2.makerAssetAmount);
+            const takerFeePaid2 = validSignedOrder2.takerFee
+                .times(makerAssetFillAmount2)
+                .dividedToIntegerBy(validSignedOrder2.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee.plus(takerFeePaid2);
+            const cumulativeMakerAssetFillAmount = validSignedOrder.makerAssetAmount.plus(makerAssetFillAmount2);
+            // Maker #1
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(validSignedOrder.makerAssetAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(validSignedOrder.takerAssetAmount),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(validSignedOrder.makerFee),
+            );
+            // Maker #2
+            expect(newBalances[validMakerAddress2][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultMakerAssetAddress].minus(makerAssetFillAmount2),
+            );
+            expect(newBalances[validMakerAddress2][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress2][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][zrxToken.address].minus(makerFeePaid2),
+            );
+            // Taker
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(cumulativeTakerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(cumulativeMakerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            // Fee recipient
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address]
+                    .add(validSignedOrder.makerFee)
+                    .add(makerFeePaid2)
+                    .add(takerFeePaid),
+            );
+        });
+        it('should revert if one maker does not meet the balance threshold', async () => {
+            // Create order set with one non-valid maker address
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                makerAddress: invalidAddress,
+            });
+            const orders = [validSignedOrder, signedOrderWithBadMakerAddress];
+            // Execute transaction
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.marketSellOrdersNoThrowAsync(orders, validTakerAddress, {
+                    takerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            const orders = [validSignedOrder, validSignedOrder2];
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.marketSellOrdersNoThrowAsync(orders, invalidAddress, {
+                    takerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+    });
+
+    describe('marketBuyOrders', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+            validSignedOrder2 = await orderFactory2.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both makers/taker when both makers and taker meet the balance threshold', async () => {
+            // Execute a valid fill
+            const orders = [validSignedOrder, validSignedOrder2];
+            const cumulativeTakerAssetFillAmount = validSignedOrder.takerAssetAmount.plus(takerAssetFillAmount);
+            const makerAssetFillAmount2 = takerAssetFillAmount
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const cumulativeMakerAssetFillAmount = validSignedOrder.makerAssetAmount.plus(makerAssetFillAmount2);
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.marketBuyOrdersAsync(orders, validTakerAddress, {
+                makerAssetFillAmount: cumulativeMakerAssetFillAmount,
+            });
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [
+                validSignedOrder.makerAddress,
+                validSignedOrder2.makerAddress,
+                validTakerAddress,
+            ];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const makerFeePaid2 = validSignedOrder2.makerFee
+                .times(makerAssetFillAmount2)
+                .dividedToIntegerBy(validSignedOrder2.makerAssetAmount);
+            const takerFeePaid2 = validSignedOrder2.takerFee
+                .times(makerAssetFillAmount2)
+                .dividedToIntegerBy(validSignedOrder2.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee.plus(takerFeePaid2);
+            // Maker #1
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(validSignedOrder.makerAssetAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(validSignedOrder.takerAssetAmount),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(validSignedOrder.makerFee),
+            );
+            // Maker #2
+            expect(newBalances[validMakerAddress2][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultMakerAssetAddress].minus(makerAssetFillAmount2),
+            );
+            expect(newBalances[validMakerAddress2][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress2][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][zrxToken.address].minus(makerFeePaid2),
+            );
+            // Taker
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(cumulativeTakerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(cumulativeMakerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            // Fee recipient
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address]
+                    .add(validSignedOrder.makerFee)
+                    .add(makerFeePaid2)
+                    .add(takerFeePaid),
+            );
+        });
+        it('should revert if one maker does not meet the balance threshold', async () => {
+            // Create order set with one non-valid maker address
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                makerAddress: invalidAddress,
+            });
+            const orders = [validSignedOrder, signedOrderWithBadMakerAddress];
+            // Execute transaction
+            const dummyMakerAssetFillAmount = new BigNumber(0);
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.marketBuyOrdersAsync(orders, validTakerAddress, {
+                    makerAssetFillAmount: dummyMakerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            const orders = [validSignedOrder, validSignedOrder2];
+            const dummyMakerAssetFillAmount = new BigNumber(0);
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.marketBuyOrdersAsync(orders, invalidAddress, {
+                    makerAssetFillAmount: dummyMakerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+    });
+
+    describe('marketBuyOrdersNoThrowAsync', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+            validSignedOrder2 = await orderFactory2.newSignedOrderAsync();
+        });
+        it('should transfer the correct amounts and validate both makers/taker when both makers and taker meet the balance threshold', async () => {
+            // Execute a valid fill
+            const orders = [validSignedOrder, validSignedOrder2];
+            const cumulativeTakerAssetFillAmount = validSignedOrder.takerAssetAmount.plus(takerAssetFillAmount);
+            const makerAssetFillAmount2 = takerAssetFillAmount
+                .times(validSignedOrder.makerAssetAmount)
+                .dividedToIntegerBy(validSignedOrder.takerAssetAmount);
+            const cumulativeMakerAssetFillAmount = validSignedOrder.makerAssetAmount.plus(makerAssetFillAmount2);
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.marketBuyOrdersNoThrowAsync(
+                orders,
+                validTakerAddress,
+                {
+                    makerAssetFillAmount: cumulativeMakerAssetFillAmount,
+                    // HACK(albrow): We need to hardcode the gas estimate here because
+                    // the Geth gas estimator doesn't work with the way we use
+                    // delegatecall and swallow errors.
+                    gas: 600000,
+                },
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [
+                validSignedOrder.makerAddress,
+                validSignedOrder2.makerAddress,
+                validTakerAddress,
+            ];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            const makerFeePaid2 = validSignedOrder2.makerFee
+                .times(makerAssetFillAmount2)
+                .dividedToIntegerBy(validSignedOrder2.makerAssetAmount);
+            const takerFeePaid2 = validSignedOrder2.takerFee
+                .times(makerAssetFillAmount2)
+                .dividedToIntegerBy(validSignedOrder2.makerAssetAmount);
+            const takerFeePaid = validSignedOrder.takerFee.plus(takerFeePaid2);
+            // Maker #1
+            expect(newBalances[validMakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultMakerAssetAddress].minus(validSignedOrder.makerAssetAmount),
+            );
+            expect(newBalances[validMakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][defaultTakerAssetAddress].add(validSignedOrder.takerAssetAmount),
+            );
+            expect(newBalances[validMakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress][zrxToken.address].minus(validSignedOrder.makerFee),
+            );
+            // Maker #2
+            expect(newBalances[validMakerAddress2][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultMakerAssetAddress].minus(makerAssetFillAmount2),
+            );
+            expect(newBalances[validMakerAddress2][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][defaultTakerAssetAddress].add(takerAssetFillAmount),
+            );
+            expect(newBalances[validMakerAddress2][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validMakerAddress2][zrxToken.address].minus(makerFeePaid2),
+            );
+            // Taker
+            expect(newBalances[validTakerAddress][defaultTakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultTakerAssetAddress].minus(cumulativeTakerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][defaultMakerAssetAddress]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(cumulativeMakerAssetFillAmount),
+            );
+            expect(newBalances[validTakerAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address].minus(takerFeePaid),
+            );
+            // Fee recipient
+            expect(newBalances[feeRecipientAddress][zrxToken.address]).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address]
+                    .add(validSignedOrder.makerFee)
+                    .add(makerFeePaid2)
+                    .add(takerFeePaid),
+            );
+        });
+        it('should revert if one maker does not meet the balance threshold', async () => {
+            // Create order set with one non-valid maker address
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                makerAddress: invalidAddress,
+            });
+            const orders = [validSignedOrder, signedOrderWithBadMakerAddress];
+            // Execute transaction
+            const dummyMakerAssetFillAmount = new BigNumber(0);
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.marketBuyOrdersNoThrowAsync(orders, validTakerAddress, {
+                    makerAssetFillAmount: dummyMakerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            const orders = [validSignedOrder, validSignedOrder2];
+            const dummyMakerAssetFillAmount = new BigNumber(0);
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.marketBuyOrdersNoThrowAsync(orders, invalidAddress, {
+                    makerAssetFillAmount: dummyMakerAssetFillAmount,
+                }),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+    });
+
+    describe('matchOrders', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+            validSignedOrder2 = await orderFactory2.newSignedOrderAsync();
+        });
+        it('Should transfer correct amounts when both makers and taker meet the balance threshold', async () => {
+            // Test values/results taken from Match Orders test:
+            // 'Should transfer correct amounts when right order is fully filled and values pass isRoundingErrorFloor but fail isRoundingErrorCeil'
+            // Create orders to match
+            const signedOrderLeft = await orderFactory.newSignedOrderAsync({
+                makerAssetAmount: Web3Wrapper.toBaseUnitAmount(new BigNumber(17), 0),
+                takerAssetAmount: Web3Wrapper.toBaseUnitAmount(new BigNumber(98), 0),
+                makerFee: Web3Wrapper.toBaseUnitAmount(new BigNumber(1), 18),
+                takerFee: Web3Wrapper.toBaseUnitAmount(new BigNumber(1), 18),
+                feeRecipientAddress,
+            });
+            const signedOrderRight = await orderFactory2.newSignedOrderAsync({
+                makerAssetData: assetDataUtils.encodeERC20AssetData(defaultTakerAssetAddress),
+                takerAssetData: assetDataUtils.encodeERC20AssetData(defaultMakerAssetAddress),
+                makerAssetAmount: Web3Wrapper.toBaseUnitAmount(new BigNumber(75), 0),
+                takerAssetAmount: Web3Wrapper.toBaseUnitAmount(new BigNumber(13), 0),
+                makerFee: Web3Wrapper.toBaseUnitAmount(new BigNumber(1), 18),
+                takerFee: Web3Wrapper.toBaseUnitAmount(new BigNumber(1), 18),
+                feeRecipientAddress,
+            });
+            // Compute expected transfer amounts
+            const expectedTransferAmounts = {
+                // Left Maker
+                amountSoldByLeftMaker: Web3Wrapper.toBaseUnitAmount(new BigNumber(13), 0),
+                amountBoughtByLeftMaker: Web3Wrapper.toBaseUnitAmount(new BigNumber(75), 0),
+                feePaidByLeftMaker: Web3Wrapper.toBaseUnitAmount(new BigNumber('76.4705882352941176'), 16), // 76.47%
+                // Right Maker
+                amountSoldByRightMaker: Web3Wrapper.toBaseUnitAmount(new BigNumber(75), 0),
+                amountBoughtByRightMaker: Web3Wrapper.toBaseUnitAmount(new BigNumber(13), 0),
+                feePaidByRightMaker: Web3Wrapper.toBaseUnitAmount(new BigNumber(100), 16), // 100%
+                // Taker
+                amountReceivedByTaker: Web3Wrapper.toBaseUnitAmount(new BigNumber(0), 0),
+                feePaidByTakerLeft: Web3Wrapper.toBaseUnitAmount(new BigNumber('76.5306122448979591'), 16), // 76.53%
+                feePaidByTakerRight: Web3Wrapper.toBaseUnitAmount(new BigNumber(100), 16), // 100%
+            };
+            const txReceipt = await erc721TakerBalanceThresholdWrapper.matchOrdersAsync(
+                signedOrderLeft,
+                signedOrderRight,
+                validTakerAddress,
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses = [
+                signedOrderLeft.makerAddress,
+                signedOrderRight.makerAddress,
+                validTakerAddress,
+            ];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check balances
+            const newBalances = await erc20Wrapper.getBalancesAsync();
+            expect(
+                newBalances[signedOrderLeft.makerAddress][defaultMakerAssetAddress],
+                'Checking left maker egress ERC20 account balance',
+            ).to.be.bignumber.equal(
+                erc20Balances[signedOrderLeft.makerAddress][defaultMakerAssetAddress].sub(
+                    expectedTransferAmounts.amountSoldByLeftMaker,
+                ),
+            );
+            expect(
+                newBalances[signedOrderRight.makerAddress][defaultTakerAssetAddress],
+                'Checking right maker ingress ERC20 account balance',
+            ).to.be.bignumber.equal(
+                erc20Balances[signedOrderRight.makerAddress][defaultTakerAssetAddress].sub(
+                    expectedTransferAmounts.amountSoldByRightMaker,
+                ),
+            );
+            expect(
+                newBalances[validTakerAddress][defaultMakerAssetAddress],
+                'Checking taker ingress ERC20 account balance',
+            ).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][defaultMakerAssetAddress].add(
+                    expectedTransferAmounts.amountReceivedByTaker,
+                ),
+            );
+            expect(
+                newBalances[signedOrderLeft.makerAddress][defaultTakerAssetAddress],
+                'Checking left maker ingress ERC20 account balance',
+            ).to.be.bignumber.equal(
+                erc20Balances[signedOrderLeft.makerAddress][defaultTakerAssetAddress].add(
+                    expectedTransferAmounts.amountBoughtByLeftMaker,
+                ),
+            );
+            expect(
+                newBalances[signedOrderRight.makerAddress][defaultMakerAssetAddress],
+                'Checking right maker egress ERC20 account balance',
+            ).to.be.bignumber.equal(
+                erc20Balances[signedOrderRight.makerAddress][defaultMakerAssetAddress].add(
+                    expectedTransferAmounts.amountBoughtByRightMaker,
+                ),
+            );
+            // Paid fees
+            expect(
+                newBalances[signedOrderLeft.makerAddress][zrxToken.address],
+                'Checking left maker egress ERC20 account fees',
+            ).to.be.bignumber.equal(
+                erc20Balances[signedOrderLeft.makerAddress][zrxToken.address].minus(
+                    expectedTransferAmounts.feePaidByLeftMaker,
+                ),
+            );
+            expect(
+                newBalances[signedOrderRight.makerAddress][zrxToken.address],
+                'Checking right maker egress ERC20 account fees',
+            ).to.be.bignumber.equal(
+                erc20Balances[signedOrderRight.makerAddress][zrxToken.address].minus(
+                    expectedTransferAmounts.feePaidByRightMaker,
+                ),
+            );
+            expect(
+                newBalances[validTakerAddress][zrxToken.address],
+                'Checking taker egress ERC20 account fees',
+            ).to.be.bignumber.equal(
+                erc20Balances[validTakerAddress][zrxToken.address]
+                    .minus(expectedTransferAmounts.feePaidByTakerLeft)
+                    .sub(expectedTransferAmounts.feePaidByTakerRight),
+            );
+            // Received fees
+            expect(
+                newBalances[signedOrderLeft.feeRecipientAddress][zrxToken.address],
+                'Checking left fee recipient ingress ERC20 account fees',
+            ).to.be.bignumber.equal(
+                erc20Balances[feeRecipientAddress][zrxToken.address]
+                    .add(expectedTransferAmounts.feePaidByLeftMaker)
+                    .add(expectedTransferAmounts.feePaidByRightMaker)
+                    .add(expectedTransferAmounts.feePaidByTakerLeft)
+                    .add(expectedTransferAmounts.feePaidByTakerRight),
+            );
+        });
+        it('should revert if left maker does not meet the balance threshold', async () => {
+            // Create signed order with non-valid maker address
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                senderAddress: erc721BalanceThresholdFilterInstance.address,
+                makerAddress: invalidAddress,
+            });
+            // Execute transaction
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.matchOrdersAsync(
+                    validSignedOrder,
+                    signedOrderWithBadMakerAddress,
+                    validTakerAddress,
+                ),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if right maker does not meet the balance threshold', async () => {
+            // Create signed order with non-valid maker address
+            const signedOrderWithBadMakerAddress = await orderFactory.newSignedOrderAsync({
+                senderAddress: erc721BalanceThresholdFilterInstance.address,
+                makerAddress: invalidAddress,
+            });
+            // Execute transaction
+            return expectTransactionFailedAsync(
+                erc721TakerBalanceThresholdWrapper.matchOrdersAsync(
+                    signedOrderWithBadMakerAddress,
+                    validSignedOrder,
+                    validTakerAddress,
+                ),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+        it('should revert if taker does not meet the balance threshold', async () => {
+            return expectTransactionFailedAsync(
+                erc721NonValidBalanceThresholdWrapper.matchOrdersAsync(
+                    validSignedOrder,
+                    validSignedOrder,
+                    invalidAddress,
+                ),
+                RevertReason.AtLeastOneAddressDoesNotMeetBalanceThreshold,
+            );
+        });
+    });
+
+    describe('cancelOrder', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+            validSignedOrder = await orderFactory.newSignedOrderAsync();
+            validSignedOrder2 = await orderFactory2.newSignedOrderAsync();
+        });
+        it('Should successfully cancel order if maker meets balance threshold', async () => {
+            // Verify order is not cancelled
+            const orderInfoBeforeCancelling = await erc721MakerBalanceThresholdWrapper.getOrderInfoAsync(
+                validSignedOrder,
+            );
+            expect(orderInfoBeforeCancelling.orderStatus).to.be.equal(OrderStatus.FILLABLE);
+            // Cancel
+            const txReceipt = await erc721MakerBalanceThresholdWrapper.cancelOrderAsync(
+                validSignedOrder,
+                validSignedOrder.makerAddress,
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses: string[] = [];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check that order was cancelled
+            const orderInfoAfterCancelling = await erc721MakerBalanceThresholdWrapper.getOrderInfoAsync(
+                validSignedOrder,
+            );
+            expect(orderInfoAfterCancelling.orderStatus).to.be.equal(OrderStatus.CANCELLED);
+        });
+        it('Should successfully cancel order if maker does not meet balance threshold', async () => {
+            // Create order where maker does not meet balance threshold
+            const signedOrderWithBadMakerAddress = await invalidOrderFactory.newSignedOrderAsync({});
+            // Verify order is not cancelled
+            const orderInfoBeforeCancelling = await erc721NonValidBalanceThresholdWrapper.getOrderInfoAsync(
+                signedOrderWithBadMakerAddress,
+            );
+            expect(orderInfoBeforeCancelling.orderStatus).to.be.equal(OrderStatus.FILLABLE);
+            // Cancel
+            const txReceipt = await erc721NonValidBalanceThresholdWrapper.cancelOrderAsync(
+                signedOrderWithBadMakerAddress,
+                signedOrderWithBadMakerAddress.makerAddress,
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses: string[] = [];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check that order was cancelled
+            const orderInfoAfterCancelling = await erc721MakerBalanceThresholdWrapper.getOrderInfoAsync(
+                signedOrderWithBadMakerAddress,
+            );
+            expect(orderInfoAfterCancelling.orderStatus).to.be.equal(OrderStatus.CANCELLED);
+        });
+    });
+
+    describe('batchCancelOrders', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+        });
+        it('Should successfully batch cancel orders if maker meets balance threshold', async () => {
+            // Create orders to cancel
+            const validSignedOrders = [
+                await orderFactory.newSignedOrderAsync(),
+                await orderFactory.newSignedOrderAsync(),
+                await orderFactory.newSignedOrderAsync(),
+            ];
+            // Verify orders are not cancelled
+            _.each(validSignedOrders, async signedOrder => {
+                const orderInfoBeforeCancelling = await erc721MakerBalanceThresholdWrapper.getOrderInfoAsync(
+                    signedOrder,
+                );
+                return expect(orderInfoBeforeCancelling.orderStatus).to.be.equal(OrderStatus.FILLABLE);
+            });
+            // Cancel
+            const txReceipt = await erc721MakerBalanceThresholdWrapper.batchCancelOrdersAsync(
+                validSignedOrders,
+                validSignedOrders[0].makerAddress,
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses: string[] = [];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check that order was cancelled
+            _.each(validSignedOrders, async signedOrder => {
+                const orderInfoAfterCancelling = await erc721MakerBalanceThresholdWrapper.getOrderInfoAsync(
+                    signedOrder,
+                );
+                return expect(orderInfoAfterCancelling.orderStatus).to.be.equal(OrderStatus.CANCELLED);
+            });
+        });
+        it('Should successfully batch cancel order if maker does not meet balance threshold', async () => {
+            // Create orders to cancel
+            const invalidSignedOrders = [
+                await invalidOrderFactory.newSignedOrderAsync(),
+                await invalidOrderFactory.newSignedOrderAsync(),
+                await invalidOrderFactory.newSignedOrderAsync(),
+            ];
+            // Verify orders are not cancelled
+            _.each(invalidSignedOrders, async signedOrder => {
+                const orderInfoBeforeCancelling = await erc721NonValidBalanceThresholdWrapper.getOrderInfoAsync(
+                    signedOrder,
+                );
+                return expect(orderInfoBeforeCancelling.orderStatus).to.be.equal(OrderStatus.FILLABLE);
+            });
+            // Cancel
+            const txReceipt = await erc721NonValidBalanceThresholdWrapper.batchCancelOrdersAsync(
+                invalidSignedOrders,
+                invalidAddress,
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses: string[] = [];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check that order was cancelled
+            _.each(invalidSignedOrders, async signedOrder => {
+                const orderInfoAfterCancelling = await erc721NonValidBalanceThresholdWrapper.getOrderInfoAsync(
+                    signedOrder,
+                );
+                return expect(orderInfoAfterCancelling.orderStatus).to.be.equal(OrderStatus.CANCELLED);
+            });
+        });
+    });
+
+    describe('cancelOrdersUpTo', () => {
+        beforeEach(async () => {
+            erc20Balances = await erc20Wrapper.getBalancesAsync();
+        });
+        it('Should successfully batch cancel orders if maker meets balance threshold', async () => {
+            // Create orders to cancel
+            const validSignedOrders = [
+                await orderFactory.newSignedOrderAsync({ salt: new BigNumber(0) }),
+                await orderFactory.newSignedOrderAsync({ salt: new BigNumber(1) }),
+                await orderFactory.newSignedOrderAsync({ salt: new BigNumber(2) }),
+            ];
+            // Verify orders are not cancelled
+            _.each(validSignedOrders, async signedOrder => {
+                const orderInfoBeforeCancelling = await erc721MakerBalanceThresholdWrapper.getOrderInfoAsync(
+                    signedOrder,
+                );
+                return expect(orderInfoBeforeCancelling.orderStatus).to.be.equal(OrderStatus.FILLABLE);
+            });
+            // Cancel
+            const cancelOrdersUpToThisSalt = new BigNumber(1);
+            const txReceipt = await erc721MakerBalanceThresholdWrapper.cancelOrdersUpToAsync(
+                cancelOrdersUpToThisSalt,
+                validSignedOrders[0].makerAddress,
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses: string[] = [];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check that order was cancelled
+            _.each(validSignedOrders, async (signedOrder, salt: number) => {
+                const orderInfoAfterCancelling = await erc721MakerBalanceThresholdWrapper.getOrderInfoAsync(
+                    signedOrder,
+                );
+                const saltAsBigNumber = new BigNumber(salt);
+                if (saltAsBigNumber.lessThanOrEqualTo(cancelOrdersUpToThisSalt)) {
+                    return expect(orderInfoAfterCancelling.orderStatus).to.be.equal(OrderStatus.CANCELLED);
+                } else {
+                    return expect(orderInfoAfterCancelling.orderStatus).to.be.equal(OrderStatus.FILLABLE);
+                }
+            });
+        });
+        it('Should successfully batch cancel order if maker does not meet balance threshold', async () => {
+            // Create orders to cancel
+            const invalidSignedOrders = [
+                await invalidOrderFactory.newSignedOrderAsync({ salt: new BigNumber(0) }),
+                await invalidOrderFactory.newSignedOrderAsync({ salt: new BigNumber(1) }),
+                await invalidOrderFactory.newSignedOrderAsync({ salt: new BigNumber(2) }),
+            ];
+            // Verify orders are not cancelled
+            _.each(invalidSignedOrders, async signedOrder => {
+                const orderInfoBeforeCancelling = await erc721NonValidBalanceThresholdWrapper.getOrderInfoAsync(
+                    signedOrder,
+                );
+                return expect(orderInfoBeforeCancelling.orderStatus).to.be.equal(OrderStatus.FILLABLE);
+            });
+            // Cancel
+            const cancelOrdersUpToThisSalt = new BigNumber(1);
+            const txReceipt = await erc721NonValidBalanceThresholdWrapper.cancelOrdersUpToAsync(
+                cancelOrdersUpToThisSalt,
+                invalidAddress,
+            );
+            // Assert validated addresses
+            const expectedValidatedAddresseses: string[] = [];
+            await assertValidatedAddressesLog(txReceipt, expectedValidatedAddresseses);
+            // Check that order was cancelled
+            _.each(invalidSignedOrders, async (signedOrder, salt: number) => {
+                const orderInfoAfterCancelling = await erc721NonValidBalanceThresholdWrapper.getOrderInfoAsync(
+                    signedOrder,
+                );
+                const saltAsBigNumber = new BigNumber(salt);
+                if (saltAsBigNumber.lessThanOrEqualTo(cancelOrdersUpToThisSalt)) {
+                    return expect(orderInfoAfterCancelling.orderStatus).to.be.equal(OrderStatus.CANCELLED);
+                } else {
+                    return expect(orderInfoAfterCancelling.orderStatus).to.be.equal(OrderStatus.FILLABLE);
+                }
+            });
+        });
+    });
+});
+// tslint:disable:max-file-line-count
+// tslint:enable:no-unnecessary-type-assertion
diff --git a/contracts/extensions/test/utils/balance_threshold_wrapper.ts b/contracts/extensions/test/utils/balance_threshold_wrapper.ts
new file mode 100644
index 000000000..28a4ef011
--- /dev/null
+++ b/contracts/extensions/test/utils/balance_threshold_wrapper.ts
@@ -0,0 +1,283 @@
+import { artifacts as protocolArtifacts, ExchangeContract } from '@0x/contracts-protocol';
+import {
+    FillResults,
+    formatters,
+    LogDecoder,
+    OrderInfo,
+    orderUtils,
+    TransactionFactory,
+} from '@0x/contracts-test-utils';
+import { artifacts as tokensArtifacts } from '@0x/contracts-tokens';
+import { SignedOrder } from '@0x/types';
+import { BigNumber } from '@0x/utils';
+import { Web3Wrapper } from '@0x/web3-wrapper';
+import { Provider, TransactionReceiptWithDecodedLogs } from 'ethereum-types';
+import * as _ from 'lodash';
+
+import { BalanceThresholdFilterContract } from '../../generated-wrappers/balance_threshold_filter';
+import { artifacts } from '../../src/artifacts';
+
+export class BalanceThresholdWrapper {
+    private readonly _balanceThresholdFilter: BalanceThresholdFilterContract;
+    private readonly _signerTransactionFactory: TransactionFactory;
+    private readonly _exchange: ExchangeContract;
+    private readonly _web3Wrapper: Web3Wrapper;
+    private readonly _logDecoder: LogDecoder;
+    constructor(
+        balanceThresholdFilter: BalanceThresholdFilterContract,
+        exchangeContract: ExchangeContract,
+        signerTransactionFactory: TransactionFactory,
+        provider: Provider,
+    ) {
+        this._balanceThresholdFilter = balanceThresholdFilter;
+        this._exchange = exchangeContract;
+        this._signerTransactionFactory = signerTransactionFactory;
+        this._web3Wrapper = new Web3Wrapper(provider);
+        this._logDecoder = new LogDecoder(this._web3Wrapper, {
+            ...artifacts,
+            ...tokensArtifacts,
+            ...protocolArtifacts,
+        });
+    }
+    public async fillOrderAsync(
+        signedOrder: SignedOrder,
+        from: string,
+        opts: { takerAssetFillAmount?: BigNumber } = {},
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = orderUtils.createFill(signedOrder, opts.takerAssetFillAmount);
+        const data = this._exchange.fillOrder.getABIEncodedTransactionData(
+            params.order,
+            params.takerAssetFillAmount,
+            params.signature,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from);
+        return txReceipt;
+    }
+    public async fillOrKillOrderAsync(
+        signedOrder: SignedOrder,
+        from: string,
+        opts: { takerAssetFillAmount?: BigNumber } = {},
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = orderUtils.createFill(signedOrder, opts.takerAssetFillAmount);
+        const data = this._exchange.fillOrKillOrder.getABIEncodedTransactionData(
+            params.order,
+            params.takerAssetFillAmount,
+            params.signature,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from);
+        return txReceipt;
+    }
+    public async fillOrderNoThrowAsync(
+        signedOrder: SignedOrder,
+        from: string,
+        opts: { takerAssetFillAmount?: BigNumber; gas?: number } = {},
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = orderUtils.createFill(signedOrder, opts.takerAssetFillAmount);
+        const data = this._exchange.fillOrderNoThrow.getABIEncodedTransactionData(
+            params.order,
+            params.takerAssetFillAmount,
+            params.signature,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from, opts.gas);
+        return txReceipt;
+    }
+    public async batchFillOrdersAsync(
+        orders: SignedOrder[],
+        from: string,
+        opts: { takerAssetFillAmounts?: BigNumber[] } = {},
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = formatters.createBatchFill(orders, opts.takerAssetFillAmounts);
+        const data = this._exchange.batchFillOrders.getABIEncodedTransactionData(
+            params.orders,
+            params.takerAssetFillAmounts,
+            params.signatures,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from);
+        return txReceipt;
+    }
+    public async batchFillOrKillOrdersAsync(
+        orders: SignedOrder[],
+        from: string,
+        opts: { takerAssetFillAmounts?: BigNumber[] } = {},
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = formatters.createBatchFill(orders, opts.takerAssetFillAmounts);
+        const data = this._exchange.batchFillOrKillOrders.getABIEncodedTransactionData(
+            params.orders,
+            params.takerAssetFillAmounts,
+            params.signatures,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from);
+        return txReceipt;
+    }
+    public async batchFillOrdersNoThrowAsync(
+        orders: SignedOrder[],
+        from: string,
+        opts: { takerAssetFillAmounts?: BigNumber[]; gas?: number } = {},
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = formatters.createBatchFill(orders, opts.takerAssetFillAmounts);
+        const data = this._exchange.batchFillOrKillOrders.getABIEncodedTransactionData(
+            params.orders,
+            params.takerAssetFillAmounts,
+            params.signatures,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from, opts.gas);
+        return txReceipt;
+    }
+    public async marketSellOrdersAsync(
+        orders: SignedOrder[],
+        from: string,
+        opts: { takerAssetFillAmount: BigNumber },
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = formatters.createMarketSellOrders(orders, opts.takerAssetFillAmount);
+        const data = this._exchange.marketSellOrders.getABIEncodedTransactionData(
+            params.orders,
+            params.takerAssetFillAmount,
+            params.signatures,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from);
+        return txReceipt;
+    }
+    public async marketSellOrdersNoThrowAsync(
+        orders: SignedOrder[],
+        from: string,
+        opts: { takerAssetFillAmount: BigNumber; gas?: number },
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = formatters.createMarketSellOrders(orders, opts.takerAssetFillAmount);
+        const data = this._exchange.marketSellOrdersNoThrow.getABIEncodedTransactionData(
+            params.orders,
+            params.takerAssetFillAmount,
+            params.signatures,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from, opts.gas);
+        return txReceipt;
+    }
+    public async marketBuyOrdersAsync(
+        orders: SignedOrder[],
+        from: string,
+        opts: { makerAssetFillAmount: BigNumber },
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = formatters.createMarketBuyOrders(orders, opts.makerAssetFillAmount);
+        const data = this._exchange.marketBuyOrders.getABIEncodedTransactionData(
+            params.orders,
+            params.makerAssetFillAmount,
+            params.signatures,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from);
+        return txReceipt;
+    }
+    public async marketBuyOrdersNoThrowAsync(
+        orders: SignedOrder[],
+        from: string,
+        opts: { makerAssetFillAmount: BigNumber; gas?: number },
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = formatters.createMarketBuyOrders(orders, opts.makerAssetFillAmount);
+        const data = this._exchange.marketBuyOrdersNoThrow.getABIEncodedTransactionData(
+            params.orders,
+            params.makerAssetFillAmount,
+            params.signatures,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from, opts.gas);
+        return txReceipt;
+    }
+    public async cancelOrderAsync(signedOrder: SignedOrder, from: string): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = orderUtils.createCancel(signedOrder);
+        const data = this._exchange.cancelOrder.getABIEncodedTransactionData(params.order);
+        const txReceipt = this._executeTransactionAsync(data, from);
+        return txReceipt;
+    }
+    public async batchCancelOrdersAsync(
+        orders: SignedOrder[],
+        from: string,
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = formatters.createBatchCancel(orders);
+        const data = this._exchange.batchCancelOrders.getABIEncodedTransactionData(params.orders);
+        const txReceipt = this._executeTransactionAsync(data, from);
+        return txReceipt;
+    }
+    public async cancelOrdersUpToAsync(salt: BigNumber, from: string): Promise<TransactionReceiptWithDecodedLogs> {
+        const data = this._exchange.cancelOrdersUpTo.getABIEncodedTransactionData(salt);
+        const txReceipt = this._executeTransactionAsync(data, from);
+        return txReceipt;
+    }
+    public async getTakerAssetFilledAmountAsync(orderHashHex: string): Promise<BigNumber> {
+        const filledAmount = await this._exchange.filled.callAsync(orderHashHex);
+        return filledAmount;
+    }
+    public async isCancelledAsync(orderHashHex: string): Promise<boolean> {
+        const isCancelled = await this._exchange.cancelled.callAsync(orderHashHex);
+        return isCancelled;
+    }
+    public async getOrderEpochAsync(makerAddress: string, senderAddress: string): Promise<BigNumber> {
+        const orderEpoch = await this._exchange.orderEpoch.callAsync(makerAddress, senderAddress);
+        return orderEpoch;
+    }
+    public async getOrderInfoAsync(signedOrder: SignedOrder): Promise<OrderInfo> {
+        const orderInfo = await this._exchange.getOrderInfo.callAsync(signedOrder);
+        return orderInfo;
+    }
+    public async getOrdersInfoAsync(signedOrders: SignedOrder[]): Promise<OrderInfo[]> {
+        const ordersInfo = (await this._exchange.getOrdersInfo.callAsync(signedOrders)) as OrderInfo[];
+        return ordersInfo;
+    }
+    public async matchOrdersAsync(
+        signedOrderLeft: SignedOrder,
+        signedOrderRight: SignedOrder,
+        from: string,
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const params = orderUtils.createMatchOrders(signedOrderLeft, signedOrderRight);
+        const data = await this._exchange.matchOrders.getABIEncodedTransactionData(
+            params.left,
+            params.right,
+            params.leftSignature,
+            params.rightSignature,
+        );
+        const txReceipt = this._executeTransactionAsync(data, from);
+        return txReceipt;
+    }
+    public async getFillOrderResultsAsync(
+        signedOrder: SignedOrder,
+        from: string,
+        opts: { takerAssetFillAmount?: BigNumber } = {},
+    ): Promise<FillResults> {
+        const params = orderUtils.createFill(signedOrder, opts.takerAssetFillAmount);
+        const fillResults = await this._exchange.fillOrder.callAsync(
+            params.order,
+            params.takerAssetFillAmount,
+            params.signature,
+            { from },
+        );
+        return fillResults;
+    }
+    public abiEncodeFillOrder(signedOrder: SignedOrder, opts: { takerAssetFillAmount?: BigNumber } = {}): string {
+        const params = orderUtils.createFill(signedOrder, opts.takerAssetFillAmount);
+        const data = this._exchange.fillOrder.getABIEncodedTransactionData(
+            params.order,
+            params.takerAssetFillAmount,
+            params.signature,
+        );
+        return data;
+    }
+    public getBalanceThresholdAddress(): string {
+        return this._balanceThresholdFilter.address;
+    }
+    public getExchangeAddress(): string {
+        return this._exchange.address;
+    }
+    private async _executeTransactionAsync(
+        abiEncodedExchangeTxData: string,
+        from: string,
+        gas?: number,
+    ): Promise<TransactionReceiptWithDecodedLogs> {
+        const signedExchangeTx = this._signerTransactionFactory.newSignedTransaction(abiEncodedExchangeTxData);
+        const txOpts = _.isUndefined(gas) ? { from } : { from, gas };
+        const txHash = await this._balanceThresholdFilter.executeTransaction.sendTransactionAsync(
+            signedExchangeTx.salt,
+            signedExchangeTx.signerAddress,
+            signedExchangeTx.data,
+            signedExchangeTx.signature,
+            txOpts,
+        );
+        const txReceipt = await this._logDecoder.getTxWithDecodedLogsAsync(txHash);
+        return txReceipt;
+    }
+}
diff --git a/contracts/extensions/tsconfig.json b/contracts/extensions/tsconfig.json
index a4ce1e002..a303e3f5c 100644
--- a/contracts/extensions/tsconfig.json
+++ b/contracts/extensions/tsconfig.json
@@ -6,6 +6,10 @@
         "resolveJsonModule": true
     },
     "include": ["./src/**/*", "./test/**/*", "./generated-wrappers/**/*"],
-    "files": ["./generated-artifacts/DutchAuction.json", "./generated-artifacts/Forwarder.json"],
+    "files": [
+        "./generated-artifacts/BalanceThresholdFilter.json",
+        "./generated-artifacts/DutchAuction.json",
+        "./generated-artifacts/Forwarder.json"
+    ],
     "exclude": ["./deploy/solc/solc_bin"]
 }
diff --git a/contracts/libs/contracts/libs/LibAddressArray.sol b/contracts/libs/contracts/libs/LibAddressArray.sol
new file mode 100644
index 000000000..ccae2ac5f
--- /dev/null
+++ b/contracts/libs/contracts/libs/LibAddressArray.sol
@@ -0,0 +1,84 @@
+/*
+
+  Copyright 2018 ZeroEx Intl.
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+*/
+
+pragma solidity 0.4.24;
+
+import "@0x/contracts-utils/contracts/utils/LibBytes/LibBytes.sol";
+
+
+library LibAddressArray {
+
+    /// @dev Append a new address to an array of addresses.
+    ///      The `addressArray` may need to be reallocated to make space
+    ///      for the new address. Because of this we return the resulting
+    ///      memory location of `addressArray`.
+    /// @param addressToAppend  Address to append.
+    /// @return Array of addresses: [... addressArray, addressToAppend]
+    function append(address[] memory addressArray, address addressToAppend) 
+        internal pure
+        returns (address[])
+    {
+        // Get stats on address array and free memory
+        uint256 freeMemPtr = 0;
+        uint256 addressArrayBeginPtr = 0;
+        uint256 addressArrayEndPtr = 0;
+        uint256 addressArrayLength = addressArray.length;
+        uint256 addressArrayMemSizeInBytes = 32 + (32 * addressArrayLength);
+        assembly {
+            freeMemPtr := mload(0x40)
+            addressArrayBeginPtr := addressArray
+            addressArrayEndPtr := add(addressArray, addressArrayMemSizeInBytes)
+        }
+
+        // Cases for `freeMemPtr`:
+        //  `freeMemPtr` == `addressArrayEndPtr`: Nothing occupies memory after `addressArray`
+        //  `freeMemPtr` > `addressArrayEndPtr`: Some value occupies memory after `addressArray`
+        //  `freeMemPtr` < `addressArrayEndPtr`: Memory has not been managed properly.
+        require(
+            freeMemPtr >= addressArrayEndPtr,
+            "INVALID_FREE_MEMORY_PTR"
+        );
+
+        // If free memory begins at the end of `addressArray`
+        // then we can append `addressToAppend` directly.
+        // Otherwise, we must copy the array to free memory
+        // before appending new values to it.
+        if (freeMemPtr > addressArrayEndPtr) {
+            LibBytes.memCopy(freeMemPtr, addressArrayBeginPtr, addressArrayMemSizeInBytes);
+            assembly {
+                addressArray := freeMemPtr
+                addressArrayBeginPtr := addressArray
+            }
+        }
+
+        // Append `addressToAppend`
+        addressArrayLength += 1;
+        addressArrayMemSizeInBytes += 32;
+        addressArrayEndPtr = addressArrayBeginPtr + addressArrayMemSizeInBytes;
+        freeMemPtr = addressArrayEndPtr;
+        assembly {
+            // Store new array length
+            mstore(addressArray, addressArrayLength)
+
+            // Update `freeMemPtr`
+            mstore(0x40, freeMemPtr)
+        }
+        addressArray[addressArrayLength - 1] = addressToAppend;
+        return addressArray;
+    }
+}
diff --git a/contracts/libs/contracts/libs/LibExchangeSelectors.sol b/contracts/libs/contracts/libs/LibExchangeSelectors.sol
new file mode 100644
index 000000000..edb4f9cbd
--- /dev/null
+++ b/contracts/libs/contracts/libs/LibExchangeSelectors.sol
@@ -0,0 +1,152 @@
+/*
+
+  Copyright 2018 ZeroEx Intl.
+
+  Licensed under the Apache License, Version 2.0 (the "License");
+  you may not use this file except in compliance with the License.
+  You may obtain a copy of the License at
+
+    http://www.apache.org/licenses/LICENSE-2.0
+
+  Unless required by applicable law or agreed to in writing, software
+  distributed under the License is distributed on an "AS IS" BASIS,
+  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
+  See the License for the specific language governing permissions and
+  limitations under the License.
+
+*/
+
+pragma solidity 0.4.24;
+
+
+contract LibExchangeSelectors {
+
+    // solhint-disable max-line-length
+    // allowedValidators
+    bytes4 constant public ALLOWED_VALIDATORS_SELECTOR = 0x7b8e3514;
+    bytes4 constant public ALLOWED_VALIDATORS_SELECTOR_GENERATOR = bytes4(keccak256("allowedValidators(address,address)"));
+
+    // assetProxies
+    bytes4 constant public ASSET_PROXIES_SELECTOR = 0x3fd3c997;
+    bytes4 constant public ASSET_PROXIES_SELECTOR_GENERATOR = bytes4(keccak256("assetProxies(bytes4)"));
+
+    // batchCancelOrders
+    bytes4 constant public BATCH_CANCEL_ORDERS_SELECTOR = 0x4ac14782;
+    bytes4 constant public BATCH_CANCEL_ORDERS_SELECTOR_GENERATOR = bytes4(keccak256("batchCancelOrders((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes)[])"));
+
+    // batchFillOrKillOrders
+    bytes4 constant public BATCH_FILL_OR_KILL_ORDERS_SELECTOR = 0x4d0ae546;
+    bytes4 constant public BATCH_FILL_OR_KILL_ORDERS_SELECTOR_GENERATOR = bytes4(keccak256("batchFillOrKillOrders((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes)[],uint256[],bytes[])"));
+
+    // batchFillOrders
+    bytes4 constant public BATCH_FILL_ORDERS_SELECTOR = 0x297bb70b;
+    bytes4 constant public BATCH_FILL_ORDERS_SELECTOR_GENERATOR = bytes4(keccak256("batchFillOrders((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes)[],uint256[],bytes[])"));
+
+    // batchFillOrdersNoThrow
+    bytes4 constant public BATCH_FILL_ORDERS_NO_THROW_SELECTOR = 0x50dde190;
+    bytes4 constant public BATCH_FILL_ORDERS_NO_THROW_SELECTOR_GENERATOR = bytes4(keccak256("batchFillOrdersNoThrow((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes)[],uint256[],bytes[])"));
+
+    // cancelOrder
+    bytes4 constant public CANCEL_ORDER_SELECTOR = 0xd46b02c3;
+    bytes4 constant public CANCEL_ORDER_SELECTOR_GENERATOR = bytes4(keccak256("cancelOrder((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes))"));
+
+    // cancelOrdersUpTo
+    bytes4 constant public CANCEL_ORDERS_UP_TO_SELECTOR = 0x4f9559b1;
+    bytes4 constant public CANCEL_ORDERS_UP_TO_SELECTOR_GENERATOR = bytes4(keccak256("cancelOrdersUpTo(uint256)"));
+
+    // cancelled
+    bytes4 constant public CANCELLED_SELECTOR = 0x2ac12622;
+    bytes4 constant public CANCELLED_SELECTOR_GENERATOR = bytes4(keccak256("cancelled(bytes32)"));
+
+    // currentContextAddress
+    bytes4 constant public CURRENT_CONTEXT_ADDRESS_SELECTOR = 0xeea086ba;
+    bytes4 constant public CURRENT_CONTEXT_ADDRESS_SELECTOR_GENERATOR = bytes4(keccak256("currentContextAddress()"));
+
+    // executeTransaction
+    bytes4 constant public EXECUTE_TRANSACTION_SELECTOR = 0xbfc8bfce;
+    bytes4 constant public EXECUTE_TRANSACTION_SELECTOR_GENERATOR = bytes4(keccak256("executeTransaction(uint256,address,bytes,bytes)"));
+
+    // fillOrKillOrder
+    bytes4 constant public FILL_OR_KILL_ORDER_SELECTOR = 0x64a3bc15;
+    bytes4 constant public FILL_OR_KILL_ORDER_SELECTOR_GENERATOR = bytes4(keccak256("fillOrKillOrder((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes),uint256,bytes)"));
+
+    // fillOrder
+    bytes4 constant public FILL_ORDER_SELECTOR = 0xb4be83d5;
+    bytes4 constant public FILL_ORDER_SELECTOR_GENERATOR = bytes4(keccak256("fillOrder((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes),uint256,bytes)"));
+
+    // fillOrderNoThrow
+    bytes4 constant public FILL_ORDER_NO_THROW_SELECTOR = 0x3e228bae;
+    bytes4 constant public FILL_ORDER_NO_THROW_SELECTOR_GENERATOR = bytes4(keccak256("fillOrderNoThrow((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes),uint256,bytes)"));
+
+    // filled
+    bytes4 constant public FILLED_SELECTOR = 0x288cdc91;
+    bytes4 constant public FILLED_SELECTOR_GENERATOR = bytes4(keccak256("filled(bytes32)"));
+
+    // getAssetProxy
+    bytes4 constant public GET_ASSET_PROXY_SELECTOR = 0x60704108;
+    bytes4 constant public GET_ASSET_PROXY_SELECTOR_GENERATOR = bytes4(keccak256("getAssetProxy(bytes4)"));
+
+    // getOrderInfo
+    bytes4 constant public GET_ORDER_INFO_SELECTOR = 0xc75e0a81;
+    bytes4 constant public GET_ORDER_INFO_SELECTOR_GENERATOR = bytes4(keccak256("getOrderInfo((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes))"));
+
+    // getOrdersInfo
+    bytes4 constant public GET_ORDERS_INFO_SELECTOR = 0x7e9d74dc;
+    bytes4 constant public GET_ORDERS_INFO_SELECTOR_GENERATOR = bytes4(keccak256("getOrdersInfo((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes)[])"));
+
+    // isValidSignature
+    bytes4 constant public IS_VALID_SIGNATURE_SELECTOR = 0x93634702;
+    bytes4 constant public IS_VALID_SIGNATURE_SELECTOR_GENERATOR = bytes4(keccak256("isValidSignature(bytes32,address,bytes)"));
+
+    // marketBuyOrders
+    bytes4 constant public MARKET_BUY_ORDERS_SELECTOR = 0xe5fa431b;
+    bytes4 constant public MARKET_BUY_ORDERS_SELECTOR_GENERATOR = bytes4(keccak256("marketBuyOrders((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes)[],uint256,bytes[])"));
+
+    // marketBuyOrdersNoThrow
+    bytes4 constant public MARKET_BUY_ORDERS_NO_THROW_SELECTOR = 0xa3e20380;
+    bytes4 constant public MARKET_BUY_ORDERS_NO_THROW_SELECTOR_GENERATOR = bytes4(keccak256("marketBuyOrdersNoThrow((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes)[],uint256,bytes[])"));
+
+    // marketSellOrders
+    bytes4 constant public MARKET_SELL_ORDERS_SELECTOR = 0x7e1d9808;
+    bytes4 constant public MARKET_SELL_ORDERS_SELECTOR_GENERATOR = bytes4(keccak256("marketSellOrders((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes)[],uint256,bytes[])"));
+
+    // marketSellOrdersNoThrow
+    bytes4 constant public MARKET_SELL_ORDERS_NO_THROW_SELECTOR = 0xdd1c7d18;
+    bytes4 constant public MARKET_SELL_ORDERS_NO_THROW_SELECTOR_GENERATOR = bytes4(keccak256("marketSellOrdersNoThrow((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes)[],uint256,bytes[])"));
+
+    // matchOrders
+    bytes4 constant public MATCH_ORDERS_SELECTOR = 0x3c28d861;
+    bytes4 constant public MATCH_ORDERS_SELECTOR_GENERATOR = bytes4(keccak256("matchOrders((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes),(address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes),bytes,bytes)"));
+
+    // orderEpoch
+    bytes4 constant public ORDER_EPOCH_SELECTOR = 0xd9bfa73e;
+    bytes4 constant public ORDER_EPOCH_SELECTOR_GENERATOR = bytes4(keccak256("orderEpoch(address,address)"));
+
+    // owner
+    bytes4 constant public OWNER_SELECTOR = 0x8da5cb5b;
+    bytes4 constant public OWNER_SELECTOR_GENERATOR = bytes4(keccak256("owner()"));
+
+    // preSign
+    bytes4 constant public PRE_SIGN_SELECTOR = 0x3683ef8e;
+    bytes4 constant public PRE_SIGN_SELECTOR_GENERATOR = bytes4(keccak256("preSign(bytes32,address,bytes)"));
+
+    // preSigned
+    bytes4 constant public PRE_SIGNED_SELECTOR = 0x82c174d0;
+    bytes4 constant public PRE_SIGNED_SELECTOR_GENERATOR = bytes4(keccak256("preSigned(bytes32,address)"));
+
+    // registerAssetProxy
+    bytes4 constant public REGISTER_ASSET_PROXY_SELECTOR = 0xc585bb93;
+    bytes4 constant public REGISTER_ASSET_PROXY_SELECTOR_GENERATOR = bytes4(keccak256("registerAssetProxy(address)"));
+
+    // setSignatureValidatorApproval
+    bytes4 constant public SET_SIGNATURE_VALIDATOR_APPROVAL_SELECTOR = 0x77fcce68;
+    bytes4 constant public SET_SIGNATURE_VALIDATOR_APPROVAL_SELECTOR_GENERATOR = bytes4(keccak256("setSignatureValidatorApproval(address,bool)"));
+
+    // transactions
+    bytes4 constant public TRANSACTIONS_SELECTOR = 0x642f2eaf;
+    bytes4 constant public TRANSACTIONS_SELECTOR_GENERATOR = bytes4(keccak256("transactions(bytes32)"));
+
+    // transferOwnership
+    bytes4 constant public TRANSFER_OWNERSHIP_SELECTOR = 0xf2fde38b;
+    bytes4 constant public TRANSFER_OWNERSHIP_SELECTOR_GENERATOR = bytes4(keccak256("transferOwnership(address)"));
+}
\ No newline at end of file
diff --git a/contracts/protocol/CHANGELOG.json b/contracts/protocol/CHANGELOG.json
index 5c3798a69..2dca9794a 100644
--- a/contracts/protocol/CHANGELOG.json
+++ b/contracts/protocol/CHANGELOG.json
@@ -1,5 +1,14 @@
 [
     {
+        "version": "2.2.0",
+        "changes": [
+            {
+                "note": "Added LibAddressArray",
+                "pr": 1383
+            }
+        ]
+    },
+    {
         "timestamp": 1544741676,
         "version": "2.1.59",
         "changes": [
diff --git a/contracts/test-utils/src/types.ts b/contracts/test-utils/src/types.ts
index d738fcd4e..1630eab0d 100644
--- a/contracts/test-utils/src/types.ts
+++ b/contracts/test-utils/src/types.ts
@@ -104,6 +104,7 @@ export enum ContractName {
     Authorizable = 'Authorizable',
     Whitelist = 'Whitelist',
     Forwarder = 'Forwarder',
+    BalanceThresholdFilter = 'BalanceThresholdFilter',
 }
 
 export interface SignedTransaction {