Move generated contract wrappers and artifacts into contracts package

1 files changed, 0 insertions, 215 deletions

diff --git a/packages/contracts/src/2.0.0/protocol/Exchange/libs/LibAbiEncoder.sol b/packages/contracts/src/2.0.0/protocol/Exchange/libs/LibAbiEncoder.sol
deleted file mode 100644
index 4aad37709..000000000
--- a/packages/contracts/src/2.0.0/protocol/Exchange/libs/LibAbiEncoder.sol
+++ /dev/null
@@ -1,215 +0,0 @@
-/*
-
-  Copyright 2018 ZeroEx Intl.
-
-  Licensed under the Apache License, Version 2.0 (the "License");
-  you may not use this file except in compliance with the License.
-  You may obtain a copy of the License at
-
-    http://www.apache.org/licenses/LICENSE-2.0
-
-  Unless required by applicable law or agreed to in writing, software
-  distributed under the License is distributed on an "AS IS" BASIS,
-  WITHOUT WARRANTIES OR CONDITIONS OF ANY KIND, either express or implied.
-  See the License for the specific language governing permissions and
-  limitations under the License.
-
-*/
-
-pragma solidity 0.4.24;
-pragma experimental ABIEncoderV2;
-
-import "./LibOrder.sol";
-
-
-contract LibAbiEncoder {
-
-    /// @dev ABI encodes calldata for `fillOrder`.
-    /// @param order Order struct containing order specifications.
-    /// @param takerAssetFillAmount Desired amount of takerAsset to sell.
-    /// @param signature Proof that order has been created by maker.
-    /// @return ABI encoded calldata for `fillOrder`.
-    function abiEncodeFillOrder(
-        LibOrder.Order memory order,
-        uint256 takerAssetFillAmount,
-        bytes memory signature
-    )
-        internal
-        pure
-        returns (bytes memory fillOrderCalldata)
-    {
-        // We need to call MExchangeCore.fillOrder using a delegatecall in
-        // assembly so that we can intercept a call that throws. For this, we
-        // need the input encoded in memory in the Ethereum ABIv2 format [1].
-
-        // | Area     | Offset | Length  | Contents                                    |
-        // | -------- |--------|---------|-------------------------------------------- |
-        // | Header   | 0x00   | 4       | function selector                           |
-        // | Params   |        | 3 * 32  | function parameters:                        |
-        // |          | 0x00   |         |   1. offset to order (*)                    |
-        // |          | 0x20   |         |   2. takerAssetFillAmount                   |
-        // |          | 0x40   |         |   3. offset to signature (*)                |
-        // | Data     |        | 12 * 32 | order:                                      |
-        // |          | 0x000  |         |   1.  senderAddress                         |
-        // |          | 0x020  |         |   2.  makerAddress                          |
-        // |          | 0x040  |         |   3.  takerAddress                          |
-        // |          | 0x060  |         |   4.  feeRecipientAddress                   |
-        // |          | 0x080  |         |   5.  makerAssetAmount                      |
-        // |          | 0x0A0  |         |   6.  takerAssetAmount                      |
-        // |          | 0x0C0  |         |   7.  makerFeeAmount                        |
-        // |          | 0x0E0  |         |   8.  takerFeeAmount                        |
-        // |          | 0x100  |         |   9.  expirationTimeSeconds                 |
-        // |          | 0x120  |         |   10. salt                                  |
-        // |          | 0x140  |         |   11. Offset to makerAssetData (*)          |
-        // |          | 0x160  |         |   12. Offset to takerAssetData (*)          |
-        // |          | 0x180  | 32      | makerAssetData Length                       |
-        // |          | 0x1A0  | **      | makerAssetData Contents                     |
-        // |          | 0x1C0  | 32      | takerAssetData Length                       |
-        // |          | 0x1E0  | **      | takerAssetData Contents                     |
-        // |          | 0x200  | 32      | signature Length                            |
-        // |          | 0x220  | **      | signature Contents                          |
-
-        // * Offsets are calculated from the beginning of the current area: Header, Params, Data:
-        //     An offset stored in the Params area is calculated from the beginning of the Params section.
-        //     An offset stored in the Data area is calculated from the beginning of the Data section.
-
-        // ** The length of dynamic array contents are stored in the field immediately preceeding the contents.
-
-        // [1]: https://solidity.readthedocs.io/en/develop/abi-spec.html
-
-        assembly {
-
-            // Areas below may use the following variables:
-            //   1. <area>Start   -- Start of this area in memory
-            //   2. <area>End     -- End of this area in memory. This value may
-            //                       be precomputed (before writing contents),
-            //                       or it may be computed as contents are written.
-            //   3. <area>Offset  -- Current offset into area. If an area's End
-            //                       is precomputed, this variable tracks the
-            //                       offsets of contents as they are written.
-
-            /////// Setup Header Area ///////
-            // Load free memory pointer
-            fillOrderCalldata := mload(0x40)
-            // bytes4(keccak256("fillOrder((address,address,address,address,uint256,uint256,uint256,uint256,uint256,uint256,bytes,bytes),uint256,bytes)"))
-            // = 0xb4be83d5
-            // Leave 0x20 bytes to store the length
-            mstore(add(fillOrderCalldata, 0x20), 0xb4be83d500000000000000000000000000000000000000000000000000000000)
-            let headerAreaEnd := add(fillOrderCalldata, 0x24)
-
-            /////// Setup Params Area ///////
-            // This area is preallocated and written to later.
-            // This is because we need to fill in offsets that have not yet been calculated.
-            let paramsAreaStart := headerAreaEnd
-            let paramsAreaEnd := add(paramsAreaStart, 0x60)
-            let paramsAreaOffset := paramsAreaStart
-
-            /////// Setup Data Area ///////
-            let dataAreaStart := paramsAreaEnd
-            let dataAreaEnd := dataAreaStart
-
-            // Offset from the source data we're reading from
-            let sourceOffset := order
-            // arrayLenBytes and arrayLenWords track the length of a dynamically-allocated bytes array.
-            let arrayLenBytes := 0
-            let arrayLenWords := 0
-
-            /////// Write order Struct ///////
-            // Write memory location of Order, relative to the start of the
-            // parameter list, then increment the paramsAreaOffset respectively.
-            mstore(paramsAreaOffset, sub(dataAreaEnd, paramsAreaStart))
-            paramsAreaOffset := add(paramsAreaOffset, 0x20)
-
-            // Write values for each field in the order
-            // It would be nice to use a loop, but we save on gas by writing
-            // the stores sequentially.
-            mstore(dataAreaEnd, mload(sourceOffset))                            // makerAddress
-            mstore(add(dataAreaEnd, 0x20), mload(add(sourceOffset, 0x20)))      // takerAddress
-            mstore(add(dataAreaEnd, 0x40), mload(add(sourceOffset, 0x40)))      // feeRecipientAddress
-            mstore(add(dataAreaEnd, 0x60), mload(add(sourceOffset, 0x60)))      // senderAddress
-            mstore(add(dataAreaEnd, 0x80), mload(add(sourceOffset, 0x80)))      // makerAssetAmount
-            mstore(add(dataAreaEnd, 0xA0), mload(add(sourceOffset, 0xA0)))      // takerAssetAmount
-            mstore(add(dataAreaEnd, 0xC0), mload(add(sourceOffset, 0xC0)))      // makerFeeAmount
-            mstore(add(dataAreaEnd, 0xE0), mload(add(sourceOffset, 0xE0)))      // takerFeeAmount
-            mstore(add(dataAreaEnd, 0x100), mload(add(sourceOffset, 0x100)))    // expirationTimeSeconds
-            mstore(add(dataAreaEnd, 0x120), mload(add(sourceOffset, 0x120)))    // salt
-            mstore(add(dataAreaEnd, 0x140), mload(add(sourceOffset, 0x140)))    // Offset to makerAssetData
-            mstore(add(dataAreaEnd, 0x160), mload(add(sourceOffset, 0x160)))    // Offset to takerAssetData
-            dataAreaEnd := add(dataAreaEnd, 0x180)
-            sourceOffset := add(sourceOffset, 0x180)
-
-            // Write offset to <order.makerAssetData>
-            mstore(add(dataAreaStart, mul(10, 0x20)), sub(dataAreaEnd, dataAreaStart))
-
-            // Calculate length of <order.makerAssetData>
-            sourceOffset := mload(add(order, 0x140)) // makerAssetData
-            arrayLenBytes := mload(sourceOffset)
-            sourceOffset := add(sourceOffset, 0x20)
-            arrayLenWords := div(add(arrayLenBytes, 0x1F), 0x20)
-
-            // Write length of <order.makerAssetData>
-            mstore(dataAreaEnd, arrayLenBytes)
-            dataAreaEnd := add(dataAreaEnd, 0x20)
-
-            // Write contents of <order.makerAssetData>
-            for {let i := 0} lt(i, arrayLenWords) {i := add(i, 1)} {
-                mstore(dataAreaEnd, mload(sourceOffset))
-                dataAreaEnd := add(dataAreaEnd, 0x20)
-                sourceOffset := add(sourceOffset, 0x20)
-            }
-
-            // Write offset to <order.takerAssetData>
-            mstore(add(dataAreaStart, mul(11, 0x20)), sub(dataAreaEnd, dataAreaStart))
-
-            // Calculate length of <order.takerAssetData>
-            sourceOffset := mload(add(order, 0x160)) // takerAssetData
-            arrayLenBytes := mload(sourceOffset)
-            sourceOffset := add(sourceOffset, 0x20)
-            arrayLenWords := div(add(arrayLenBytes, 0x1F), 0x20)
-
-            // Write length of <order.takerAssetData>
-            mstore(dataAreaEnd, arrayLenBytes)
-            dataAreaEnd := add(dataAreaEnd, 0x20)
-
-            // Write contents of  <order.takerAssetData>
-            for {let i := 0} lt(i, arrayLenWords) {i := add(i, 1)} {
-                mstore(dataAreaEnd, mload(sourceOffset))
-                dataAreaEnd := add(dataAreaEnd, 0x20)
-                sourceOffset := add(sourceOffset, 0x20)
-            }
-
-            /////// Write takerAssetFillAmount ///////
-            mstore(paramsAreaOffset, takerAssetFillAmount)
-            paramsAreaOffset := add(paramsAreaOffset, 0x20)
-
-            /////// Write signature ///////
-            // Write offset to paramsArea
-            mstore(paramsAreaOffset, sub(dataAreaEnd, paramsAreaStart))
-
-            // Calculate length of signature
-            sourceOffset := signature
-            arrayLenBytes := mload(sourceOffset)
-            sourceOffset := add(sourceOffset, 0x20)
-            arrayLenWords := div(add(arrayLenBytes, 0x1F), 0x20)
-
-            // Write length of signature
-            mstore(dataAreaEnd, arrayLenBytes)
-            dataAreaEnd := add(dataAreaEnd, 0x20)
-
-            // Write contents of signature
-            for {let i := 0} lt(i, arrayLenWords) {i := add(i, 1)} {
-                mstore(dataAreaEnd, mload(sourceOffset))
-                dataAreaEnd := add(dataAreaEnd, 0x20)
-                sourceOffset := add(sourceOffset, 0x20)
-            }
-
-            // Set length of calldata
-            mstore(fillOrderCalldata, sub(dataAreaEnd, add(fillOrderCalldata, 0x20)))
-
-            // Increment free memory pointer
-            mstore(0x40, dataAreaEnd)
-        }
-
-        return fillOrderCalldata;
-    }
-}